COM21-HCXTOP-MIB
160 objects
This is the Com21 ComController Unit Control MIB module. It provides for overall, high-level control of the ComController and comUNITY system. COM21 Part# 005-0025-00
Imported Objects
| COM21-HCX-MIB | com21 com21Hcx com21Reg com21Traps |
| COM21-HCXALM-MIB | hcxAlmSeverity hcxEventLogTime |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1141.2.1 | Identitycom21HcxCtrl | This is the Com21 ComController Unit Control MIB module. It provides for overall, high-level control of the ComController and comUNITY system. COM21 Part# 005-… | ||
| 1.3.6.1.4.1.1141.2.2 | Nodecom21HcxControlGroup | |||
| 1.3.6.1.4.1.1141.2.2.1 | ScalarhcxMacAddress | read-only | current | Contains IEEE 802 medium access control address of the ComController device. |
| 1.3.6.1.4.1.1141.2.2.2 | ScalarhcxEncryptionEnable | read-write | current | Used to enable or disable encryption on a system basis. Default is true. |
| 1.3.6.1.4.1.1141.2.2.3 | ScalarhcxPartNumber | read-only | current | The ComController Part Number is a display string . |
| 1.3.6.1.4.1.1141.2.2.4 | ScalarhcxEpochTime | read-write | current | The Epoch Time is a 31 bit signed positive integer containing the number of seconds since 1970. |
| 1.3.6.1.4.1.1141.2.2.5 | ScalarhcxUserText | read-write | current | The User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to be unique. It's purpose is so… |
| 1.3.6.1.4.1.1141.2.2.6 | ScalarhcxSerialNumber | read-only | current | The Serial Number is a 32 character number used by COM21 to uniquely identify the device. |
| 1.3.6.1.4.1.1141.2.2.7 | ScalarhcxIpAddress | read-only | current | IP address of the ComController SNMP Agent. |
| 1.3.6.1.4.1.1141.2.2.8 | ScalarhcxGatewayAddress | read-write | current | IP address of any IP Gateway. Default is 0.0.0.0. |
| 1.3.6.1.4.1.1141.2.2.9 | ScalarhcxRestartAction | read-write | current | The Restart Action is an active-value. The setting of this value to warmStart(2) causes the ComController to restart utilizing the present active software load… |
| 1.3.6.1.4.1.1141.2.2.10 | ScalarhcxMajorAlarmStatusLed | read-only | current | The Major Alarm Status LED is a read-only variable which describes the condition of the ComController Major Alarm Status light emitting diode located on the CC… |
| 1.3.6.1.4.1.1141.2.2.11 | ScalarhcxMinorAlarmStatusLed | read-only | current | The Minor Alarm Status LED is a read-only variable which describes the condition of the ComController Minor Alarm Status light emitting diode located on the CC… |
| 1.3.6.1.4.1.1141.2.2.12 | ScalarhcxAutoLoadBalancing | read-write | current | This attribute controls whether the ComController shall perform automatic load balancing after an RX resource is added (or restored to the system). Default is … |
| 1.3.6.1.4.1.1141.2.2.13 | ScalarhcxAutoFreqHopping | read-write | current | This attribute controls whether the ComController shall perform automatic frequency hopping. Note that the auto frequency hopping can also be controlled on a s… |
| 1.3.6.1.4.1.1141.2.2.14 | ScalarhcxKeyRenewalPeriod | read-write | current | Contains the period at which encryption keys should be renewed. This attribute is expressed in hours. i.e. value of 48 indicates a 48hour renewal frequency. De… |
| 1.3.6.1.4.1.1141.2.2.16 | ScalarhcxHcxSwRelease | read-only | current | This attribute details the current, active CC software revision. Format is a.b.c.ddd. |
| 1.3.6.1.4.1.1141.2.2.18 | ScalarhcxHcxSwDnldResult | read-only | current | This attribute contains the result of the last ComController software image download from the boot server. |
| 1.3.6.1.4.1.1141.2.2.21 | ScalarhcxCnfgBackupAction | read-write | current | This attribute is provided to allow a user to trigger a backup of ComController configuration data on to the boot server. backupToSaved is used to create a use… |
| 1.3.6.1.4.1.1141.2.2.22 | ScalarhcxCnfgBackupResult | read-only | current | This attribute contains the result of the last configuration data backup operation. |
| 1.3.6.1.4.1.1141.2.2.23 | ScalarhcxPhyConfigType | read-only | current | This attribute details the physical configuration type of the ComController. |
| 1.3.6.1.4.1.1141.2.2.24 | ScalarhcxNumOfShelves | read-only | current | This attribute specifies the number of shelves in the system. Presently one or two. |
| 1.3.6.1.4.1.1141.2.2.25 | ScalarhcxBootpServer | read-only | current | This attribute contains bootp server hostname. |
| 1.3.6.1.4.1.1141.2.2.26 | ScalarhcxBootpResult | read-only | current | This attribute contains the result of the last bootp operation. |
| 1.3.6.1.4.1.1141.2.2.27 | ScalarhcxIpMask | read-write | current | IP mask of the ComController SNMP Agent. |
| 1.3.6.1.4.1.1141.2.2.28 | ScalarhcxFreqHopPause | read-write | current | This attribute defines the number of seconds between a failed frequency hopping operation and a subsequent attempt. If a given upstream frequency is found to b… |
| 1.3.6.1.4.1.1141.2.2.29 | ScalarhcxMaxDnstrmCBRAlloc | read-write | current | This attribute defines the maximum percentage of downstream bandwidth that can be allocated to CBR traffic. This control mechanism will denied service to acqui… |
| 1.3.6.1.4.1.1141.2.2.30 | ScalarhcxMaxUpstrmCBRAlloc | read-write | current | This attribute defines the maximum percentage of upstream bandwidth that can be allocated to CBR traffic. Default 100. |
| 1.3.6.1.4.1.1141.2.2.31 | ScalarhcxHcxAlternateSwRel | read-write | current | This attribute details the alternate software revision. It is written after cold boot by the CC and later can be written by the user. If this value is written … |
| 1.3.6.1.4.1.1141.2.2.32 | ScalarhcxHcxImageControl | read-write | current | This attribute is used to activate a given revision of software images. The CC shall automatically reboot if this field is changed by the user and the version … |
| 1.3.6.1.4.1.1141.2.2.33 | ScalarhcxStatsControl | read-write | current | This attribute controls the statistics collection mechanism. If previousCounts is selected then the current stats shall be copied into the previous stats count… |
| 1.3.6.1.4.1.1141.2.2.34 | ScalarhcxImageTransfer | read-write | current | This attribute is used tell the CC to download an individual ComController software image from the boot server (NMAPS) to PCMCIA disk. Images transfered as a r… |
| 1.3.6.1.4.1.1141.2.2.35 | ScalarhcxTrapFormat | read-write | current | specifies the format of the traps generated by the Common Controller. Default is snmpv1. |
| 1.3.6.1.4.1.1141.2.2.36 | ScalarhcxSyncClkConfigure | read-write | current | specifies the clock used for synchronization. if networkClk is selected, one of the OC3 card should be selected as the primary source. Optionally secondary sou… |
| 1.3.6.1.4.1.1141.2.2.37 | ScalarhcxSyncClkSelect | read-only | current | specifies the clock selected for synchronization. Default is internalClk. |
| 1.3.6.1.4.1.1141.2.3 | Nodecom21HcxAcqCnfgGroup | |||
| 1.3.6.1.4.1.1141.2.3.1 | ScalarhcxAcquisitionFreq | read-write | deprecated | No longer supported. |
| 1.3.6.1.4.1.1141.2.3.6 | ScalarhcxAcqMinPower | read-write | current | Contains the minimum power setting to be used by the ComPort when hunting for upstream channel. This data is used in the INVITE_CONFIG message. Default 18. |
| 1.3.6.1.4.1.1141.2.3.7 | ScalarhcxAcqMaxPower | read-write | current | Contains the maximum power setting to be used by the ComPort when hunting for upstream channel. This data is used in the INVITE_CONFIG message. Default 58. |
| 1.3.6.1.4.1.1141.2.3.8 | ScalarhcxAcqPowerStepSize | read-write | current | Contains the power step size to be used by the ComPort when hunting for upstream channel. This data is used in the INVITE_CONFIG message. Default 1. |
| 1.3.6.1.4.1.1141.2.3.9 | ScalarhcxAltAcqFreq | read-write | deprecated | No longer supported. |
| 1.3.6.1.4.1.1141.2.3.10 | ScalarhcxActiveAcqFreq | read-only | deprecated | No longer supported. |
| 1.3.6.1.4.1.1141.2.4 | Nodecom21HcxAlmOverGroup | |||
| 1.3.6.1.4.1.1141.2.4.1 | ScalarhcxNoCurrAlarms | read-only | current | Contains the number of active ComController alarms. |
| 1.3.6.1.4.1.1141.2.4.2 | ScalarhcxEventLogSize | read-write | current | Contains the maximum number of events to be stored in the log. Default is 200. Upper limit will be controlled by the available memory. Set to 1000 for now. |
| 1.3.6.1.4.1.1141.2.5 | Nodecom21HcxStuOverGroup | |||
| 1.3.6.1.4.1.1141.2.5.1 | ScalarhcxNumConfiguredStus | read-only | current | This value contains the number of configured ComPorts for this ComController. |
| 1.3.6.1.4.1.1141.2.5.2 | ScalarhcxNumAcquiredStus | read-only | current | This value contains the number of acquired ComPorts for this ComController. |
| 1.3.6.1.4.1.1141.2.5.3 | ScalarhcxLastStuTopolgyChng | read-only | current | Contains the last time (epoch) that a change occurred in the ComPort topology. |
| 1.3.6.1.4.1.1141.2.5.4 | ScalarhcxNumEnabledStus | read-only | current | This value contains the number of enabled and active ComPorts on this ComController. Note that we assume all ComPort support ethernet if. |
| 1.3.6.1.4.1.1141.2.5.5 | ScalarhcxStuAggrUpStrmCbrRate | read-only | current | This attribute defines the aggregate of all ComPort upstream CBR rates in the ComController. This includes both acquired and unacquired ComPorts. Defined in Kb… |
| 1.3.6.1.4.1.1141.2.5.6 | ScalarhcxStuAggrUpStrmMinRate | read-only | current | This attribute defines the aggregate of all ComPort upstream minimum PCR rates in the ComController. This includes both acquired and unacquired ComPorts. Defin… |
| 1.3.6.1.4.1.1141.2.5.7 | ScalarhcxStuAggrUpStrmMaxRate | read-only | current | This attribute defines the aggregate of all ComPort upstream maximum rates in the ComController. This includes both acquired and unacquired ComPorts. Defined i… |
| 1.3.6.1.4.1.1141.2.5.9 | ScalarhcxStuAltDownFreq | read-write | current | This attribute defines an alternate ComController downstream frequency. This attribute would be utilized if an unrecognized ComPort is acquired and the hcxStuA… |
| 1.3.6.1.4.1.1141.2.5.11 | ScalarhcxStuAcqTrapEnable | read-write | current | Indicates whether the topology change trap mechanism should be used, or a trap per STU acq, or both. Note that NMAPS is dependant upon the topology change mech… |
| 1.3.6.1.4.1.1141.2.5.12 | ScalarhcxStuRpcEnable | read-write | current | Controls whether the system offers an RPC based interface for statistics and ComPort status. Default is true. |
| 1.3.6.1.4.1.1141.2.5.13 | ScalarhcxStuAutoDiscEnable | read-write | current | Controls whether the system performs auto discover of telephone return ComPorts. Default is true. |
| 1.3.6.1.4.1.1141.2.5.14 | ScalarhcxStuAutoDiscIpAddr | read-write | current | The IP address of the return path interface of a PC that will enable autodiscovery of a ComPORT operating in Telephone Return mode. A PC must be present with t… |
| 1.3.6.1.4.1.1141.2.5.15 | ScalarhcxStuAutoGainAdjust | read-write | current | This attribute is used to control the automatic adjustment of ComPort gain after acquisition. Default is disable. |
| 1.3.6.1.4.1.1141.2.5.16 | ScalarhcxStuAltDownFreqEnable | read-write | current | This attribute is used to control the automatic setting of an alternate downstream frequency. If enabled, the hcxStuAltDownFreq shall be set in any unconfigure… |
| 1.3.6.1.4.1.1141.2.5.17 | ScalarhcxStuPcMacAddress | read-write | current | This attribute is used to set the mac address of the PC. Setting this attribute starts a search for the mac address of the ComPort that is connected to this PC. |
| 1.3.6.1.4.1.1141.2.5.18 | ScalarhcxStuPcToStuMacAddressResult | read-only | current | This attribute contains the result of the last PC to ComPort mac address search. It changes to 'inprogress' when hcxStuPcMacAddress is set. When the search com… |
| 1.3.6.1.4.1.1141.2.5.19 | ScalarhcxStuOverMacAddress | read-only | current | This attribute displays the mac address of the ComPort that is connected to the PC with mac address hcxStuPcMacAddress. The value is valid only if hcxStuPcToSt… |
| 1.3.6.1.4.1.1141.2.5.20 | ScalarhcxStuGlobalSwImage | read-write | current | This attribute provides an easy way to change the configured software image for all configured ComPorts without having to modify hcxStuConfSwImage of individua… |
| 1.3.6.1.4.1.1141.2.6 | Nodecom21HcxTrapRcvrGroup | |||
| 1.3.6.1.4.1.1141.2.6.1 | TablehcxTrapReceiverTable | not-accessible | current | Table containing list of NMAPS or other management systems that are to receive traps generated by this NMM. There must be an entry for each connected NMAPS. |
| 1.3.6.1.4.1.1141.2.6.1.1 | RowhcxTrapReceiverEntry | not-accessible | current | A destination address and community string to a particular trap server, along with a trap filter and entry aging capability. |
| 1.3.6.1.4.1.1141.2.6.1.1.1 | ColumnhcxTrapRcvrStatus | read-create | current | Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the hcxTrapReceiverTable. That is, it effectively disasso… |
| 1.3.6.1.4.1.1141.2.6.1.1.2 | ColumnhcxTrapRcvrNetAddress | read-only | current | IP address for trap server that is to receive the trap. |
| 1.3.6.1.4.1.1141.2.6.1.1.3 | ColumnhcxTrapRcvrComm | read-only | current | Community string used for traps sent to this trap receiver. Note that this string is writable only by the CC CUI. |
| 1.3.6.1.4.1.1141.2.6.1.1.4 | ColumnhcxTrapRcvrAgeTime | read-write | current | This is the time interval used to age entries out of the trap receiver table. The default value if not specified will be 0, or infinite, never to be aged out. … |
| 1.3.6.1.4.1.1141.2.7 | Nodecom21HcxShelfGroup | |||
| 1.3.6.1.4.1.1141.2.7.1 | Tablecom21HcxShelfTable | not-accessible | current | TBD. |
| 1.3.6.1.4.1.1141.2.7.1.1 | Rowcom21HcxShelfEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.7.1.1.1 | ColumnhcxShelfId | read-only | current | contains ComController shelf id. |
| 1.3.6.1.4.1.1141.2.7.1.1.2 | ColumnhcxShelfNoSlots | read-only | current | contains number of slots in this shelf. |
| 1.3.6.1.4.1.1141.2.8 | Nodecom21HcxSlotGroup | |||
| 1.3.6.1.4.1.1141.2.8.1 | Tablecom21HcxSlotTable | not-accessible | current | TBD. |
| 1.3.6.1.4.1.1141.2.8.1.1 | Rowcom21HcxSlotEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.8.1.1.1 | ColumnhcxShelfNo | read-only | current | contains ComController shelf id. |
| 1.3.6.1.4.1.1141.2.8.1.1.2 | ColumnhcxSlotId | read-only | current | contains ComController slot id. |
| 1.3.6.1.4.1.1141.2.8.1.1.3 | ColumnhcxSlotSupportedTypes | read-only | current | contains card types supported for this slot. com21Exp specifies 10baseT or 100baseT or oc3. intConn is the interconnect card used on the expansion shelf (Shelf… |
| 1.3.6.1.4.1.1141.2.8.1.1.4 | ColumnhcxSlotConfigCardType | read-write | current | contains card type configured for this slot. This attribute will be checked against the set of supported card types and rejected if not present. Note that the … |
| 1.3.6.1.4.1.1141.2.8.1.1.5 | ColumnhcxSlotInsertCardType | read-only | current | contains card type inserted in the ComController slot. A value of empty shall be stored if there is no card. |
| 1.3.6.1.4.1.1141.2.9 | Nodecom21HcxImageListGroup | |||
| 1.3.6.1.4.1.1141.2.9.1 | Tablecom21HcxImageListTable | not-accessible | current | table of all ComController and ComPort images loaded on the CC. |
| 1.3.6.1.4.1.1141.2.9.1.1 | Rowcom21HcxImageListEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.9.1.1.1 | ColumnhcxImageId | read-only | current | contains image list reference. |
| 1.3.6.1.4.1.1141.2.9.1.1.2 | ColumnhcxImageType | read-only | current | contains image type. |
| 1.3.6.1.4.1.1141.2.9.1.1.3 | ColumnhcxImageFilename | read-only | current | contains image filename. This shall be used to retrieve the image from the boot server. |
| 1.3.6.1.4.1.1141.2.9.1.1.4 | ColumnhcxSwRevision | read-only | current | contains image software revision. |
| 1.3.6.1.4.1.1141.2.9.1.1.5 | ColumnhcxHwRevision | read-only | current | contains hardware revision supported by this image. Note that in the future, we may define a range of hardware revisions supported. |
| 1.3.6.1.4.1.1141.2.9.1.1.6 | ColumnhcxFwRevision | read-only | current | contains firmware boot revision supported by this image. Note that in the future, we may define a range of hardware revisions supported. |
| 1.3.6.1.4.1.1141.2.9.1.1.7 | ColumnhcxImageState | read-only | current | this attribute specifies the state of an image. An image is either part of the active set of ComController and ComPort images, or is a part of the alternate se… |
| 1.3.6.1.4.1.1141.2.10 | Nodecom21HcxServTypeGroup | |||
| 1.3.6.1.4.1.1141.2.10.1 | Tablecom21HcxServTypeTable | not-accessible | current | TBD. |
| 1.3.6.1.4.1.1141.2.10.1.1 | Rowcom21HcxServTypeEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.10.1.1.1 | ColumnhcxServiceTypeId | read-only | current | contains service type id. |
| 1.3.6.1.4.1.1141.2.10.1.1.2 | ColumnhcxServTypeDesc | read-write | current | contains service type description string. This string must be unique. |
| 1.3.6.1.4.1.1141.2.10.1.1.3 | ColumnhcxDnStrmType | read-write | current | defines CBR or ondemand (UBR) traffic in the downstream direction. Default is ondemand. |
| 1.3.6.1.4.1.1141.2.10.1.1.4 | ColumnhcxDnStrmRate | read-write | current | peak bits per second in the downstream direction. Policing/shaping of this attribute is the responsibility of the appropriate Ethernet card. Setting this value… |
| 1.3.6.1.4.1.1141.2.10.1.1.5 | ColumnhcxUpStrmType | read-write | current | defines CBR or ondemand in the upstream direction. This attribute controls the type of minimum cell traffic. Default is ondemand. |
| 1.3.6.1.4.1.1141.2.10.1.1.6 | ColumnhcxUpStrmMinRate | read-write | current | bits per second in the upstream direction. Policing/shaping of this attribute is the responsibility of the appropriate RX card. |
| 1.3.6.1.4.1.1141.2.10.1.1.7 | ColumnhcxUpStrmMaxRate | read-write | current | peak bits per second in the upstream direction. This is a best-effort rate. Policing/shaping of this attribute is the responsibility of the appropriate RX card. |
| 1.3.6.1.4.1.1141.2.10.1.1.8 | ColumnhcxServTypeDelete | read-create | current | The ComController Service Type Delete is an active-value. The setting of this value to execute(2) causes the multicast list entry to be deleted. |
| 1.3.6.1.4.1.1141.2.12 | Nodecom21HcxArpFiltTrapGroup | |||
| 1.3.6.1.4.1.1141.2.12.1 | ScalarhcxArpServerTrapEnable | read-write | current | specifies if traps should be generated when user impersonation of ComController server IP addresses is detected. Default false. |
| 1.3.6.1.4.1.1141.2.12.2 | ScalarhcxArpUserTrapEnable | read-write | current | controls if traps should be generated when user specifies an incorrect IP address in an ARP message. Default false. |
| 1.3.6.1.4.1.1141.2.13 | Nodecom21HcxStuDefaultGroup | |||
| 1.3.6.1.4.1.1141.2.13.1 | ScalarhcxStuDefaultAuth | read-write | current | Indicates whether the default authorization of a previously unconfigured and unauthorized ComPort should be permitted. If true, then all other attributes in th… |
| 1.3.6.1.4.1.1141.2.13.2 | ScalarhcxStuDefaultServType | read-write | current | Contains the default QoS group for an acquired but unconfigured/unauthorized ComPort. Once configured, then the appropriate service type defined for the partic… |
| 1.3.6.1.4.1.1141.2.13.3 | ScalarhcxStuDefaultVlan | read-write | current | Contains the default VLAN id for an acquired but unconfigured/unauthorized ComPort. Once configured, then the appropriate VLAN id defined for the particular Co… |
| 1.3.6.1.4.1.1141.2.13.4 | ScalarhcxStuDefCom21SwImage | read-write | current | Contains the default software image for an acquired but unconfigured/unauthorized ComPort. Once configured, then the appropriate software image defined for the… |
| 1.3.6.1.4.1.1141.2.13.5 | ScalarhcxStuDef3ComSwImage | read-write | current | Contains the default software image for an acquired but unconfigured/unauthorized 3COM modem. Once configured, then the appropriate software image defined for … |
| 1.3.6.1.4.1.1141.2.14 | Nodecom21HcxDbControlGroup | |||
| 1.3.6.1.4.1.1141.2.14.1 | ScalarhcxDbAction | read-write | current | This attribute is used to control various database actions. saveDb causes the present active database to be saved to disk. This will overwrite any previously s… |
| 1.3.6.1.4.1.1141.2.14.2 | ScalarhcxDbActionResult | read-only | current | This attribute contains the result of the last hcxDbAction. |
| 1.3.6.1.4.1.1141.2.14.3 | ScalarhcxDbBackupPeriod | read-write | current | the period, in hours, at which the database will be automatically saved on the disk. 0 will disable the auto backup. Default 24. |
| 1.3.6.1.4.1.1141.2.18 | Nodecom21HcxBootControlGroup | |||
| 1.3.6.1.4.1.1141.2.18.1 | ScalarhcxFileTransProt | read-write | current | specifies the type of protocol used for file transfer. i.e. for config_db and images. This information is stored in NVRAM. Note that a upon boot, if there is n… |
| 1.3.6.1.4.1.1141.2.18.2 | ScalarhcxFileServerCntrl | read-only | current | specifies how the file server address is obtained. This parameter is controlled by CC Boot shell line. Can elect to use bootp or allow the operator to explicit… |
| 1.3.6.1.4.1.1141.2.18.3 | ScalarhcxImageServerIpAddr | read-write | current | IP address of the image file server. This attribute is writeable only if hcxFileServerCntrl is set to mibSpecified. Otherwise it is a read-only attribute detai… |
| 1.3.6.1.4.1.1141.2.18.4 | ScalarhcxImageServerPath | read-write | current | specifies path to the image files. This attribute is writeable only if hcxFileServerCntrl is set to mibSpecified. Otherwise it is a read-only attribute detaili… |
| 1.3.6.1.4.1.1141.2.18.5 | ScalarhcxImageServerLogin | read-write | current | specifies a login to the image server. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified and hcxFileTransProt is set to ftp. This … |
| 1.3.6.1.4.1.1141.2.18.6 | ScalarhcxImageServerPassword | read-write | current | specifies a password to the image server. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified and hcxFileTransProt is set to ftp. Th… |
| 1.3.6.1.4.1.1141.2.18.7 | ScalarhcxDatabaseServerIpAddr | read-write | current | IP address of the server on which to save and retrieve the config database. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified. Def… |
| 1.3.6.1.4.1.1141.2.18.8 | ScalarhcxDatabaseServerPath | read-write | current | specifies path and the name of the config database file. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified. Default is null string. |
| 1.3.6.1.4.1.1141.2.18.9 | ScalarhcxDatabaseServerLogin | read-write | current | specifies a login to the Database server. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified and hcxFileTransProt is set to ftp. De… |
| 1.3.6.1.4.1.1141.2.18.10 | ScalarhcxDatabaseServerPassword | read-write | current | specifies a password to the Database server. This attribute is only applicable if hcxFileServerCntrl is set to mibSpecified and hcxFileTransProt is set to ftp.… |
| 1.3.6.1.4.1.1141.4.19 | NotificationhcxDbActionComplete | current | this notification is generated whenever the CC completes the database action. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.40 | NotificationhcxMajorStatusLedChange | current | generated whenever there is a change in major alarm LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.41 | NotificationhcxMinorStatusLedChange | current | generated whenever there is a change in minor alarm LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.42 | NotificationhcxHcxSwDnldComplete | current | This notification is generated whenever the CC completes the ComController software image download. This an event with no clear condition. Only severity is WAR… | |
| 1.3.6.1.4.1.1141.4.44 | NotificationhcxCnfgBackupComplete | current | This notification is generated whenever the CC completes the configuration data backup. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.45 | NotificationhcxBootpFailed | current | This notification is generated whenever the CC fails to successfully complete a bootp operation. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.46 | NotificationhcxPowerFailDetected | current | This notification is generated whenever a power failure condition is detected. Default severity is MAJOR. | |
| 1.3.6.1.4.1.1141.4.47 | NotificationhcxPowerFailClear | current | This notification is generated whenever a power failure condition is removed. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.48 | NotificationhcxFanFailDetected | current | This notification is generated whenever a fan failure condition is detected. Default severity is MAJOR. | |
| 1.3.6.1.4.1.1141.4.49 | NotificationhcxFanFailClear | current | This notification is generated whenever a fan failure condition is removed. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.50 | NotificationstuTopologyChange | current | This trap is sent at a maximum rate of once every 5seconds or when 100 ComPort acquisition/deacquisitions have occured, which ever is first. This an event with… | |
| 1.3.6.1.4.1.1141.4.51 | NotificationhcxStuResourceExhausted | current | generated whenever an ComPort must be denied acquisition due to a lack of CC resources. This includes an exhaustion of SIDs, leck of database capacity, etc. On… | |
| 1.3.6.1.4.1.1141.4.52 | NotificationhcxInsertChange | current | generated whenever a card is inserted for the first time, or during restart of the ComController. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.53 | NotificationhcxMismatchDetect | current | generated when the inserted card does not match the configured card type. Default severity is MAJOR. | |
| 1.3.6.1.4.1.1141.4.54 | NotificationhcxMismatchClear | current | this mismatch clear is submitted when an incorrect card is removed from a slot. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.55 | NotificationhcxCardNoRespond | current | generated when an inserted card fails to respond to a CC generated message. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.56 | NotificationhcxCardPollFail | current | generated when an inserted card fails to respond to a CC polling. Default severity is MAJOR. | |
| 1.3.6.1.4.1.1141.4.57 | NotificationhcxCardPollFailClear | current | generated when a card successfully responses to CC polling after a previous failure. Only severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.58 | NotificationhcxCardDnldFailNoImage | current | generated when a card cannot be download due to a lack of the correct image. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.59 | NotificationhcxRestartNotify | current | this trap is generated upon HCX initialization after a restart. This trap indicates to a management system that the HCX SNMP Agent, and the system generally, i… | |
| 1.3.6.1.4.1.1141.4.120 | NotificationhcxCardRemoved | current | generated whenever an inserted and correctly configured card is removed. Default severity is MAJOR. | |
| 1.3.6.1.4.1.1141.4.121 | NotificationhcxCardRemClear | current | generated whenever a card is reinserted in a slot or when a slot is configured to empty or when a slot is reassigned, and that slot has a previously generated … | |
| 1.3.6.1.4.1.1141.4.181 | NotificationhcxSyncClkChange | current | This notification is generated whenever there is a change in Clock used for Synchronization | |
| 1.3.6.1.4.1.1141.6.1 | Nodecom21HcxPhase30 | |||
| 1.3.6.1.4.1.1141.6.2 | Nodecom21HcxCompact |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Com21RowStatus | INTEGER { active(1), create(2), destroy(3), deactive(4) } | ||
| EpochTime | INTEGER (0..2147483647) | ||
| HcxCardType | INTEGER { rx(1), tx(2), ethDual10bT(3), ethQuad10bT(4), eth100bT(5), tele(6), cc(7), oc3(8), atm25(9), empty(10), txRf(11), txDig(12), eth10bT8k(13), intConn(14), rxm(15), atmlSw(16), compactSw(17) } | ||
| PrimServiceState | INTEGER { is(1), oos(2) } | ||
| StuGain | INTEGER (18..58) | ||
| UpstrmFreqKhz | INTEGER (5000..40000) |