CXAtmDxi-MIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.58.1 | ScalaratmDxiMibLevel | read-only | mandatory | Used to determine current MIB module release supported by agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.58.2 | ScalaratmDxiTranslationDfa | read-write | mandatory | Its specification implies a translation request to the corresponding VPI/VCI pair, according to the translation mode specified by atmDxiTranslationMode. The re… |
| 1.3.6.1.4.1.495.2.1.6.58.3 | ScalaratmDxiTranslationVpi | read-write | mandatory | Its specification implies a translation request between the pair (VPI,VCI) into the corresponding DFA, according to the translation mode specified by atmDxiTra… |
| 1.3.6.1.4.1.495.2.1.6.58.4 | ScalaratmDxiTranslationVci | read-write | mandatory | Its specification implies a translation request between the pair (VPI,VCI) into the corresponding DFA, according to the translation mode specified by atmDxiTra… |
| 1.3.6.1.4.1.495.2.1.6.58.5 | ScalaratmDxiTranslationMode | read-write | mandatory | Defines the mode used for translation between DFAs and the pair (VPI,VCI). The mode determines how many bytes are used to encode/decode DFAs or (VPI/VCI) pairs… |
| 1.3.6.1.4.1.495.2.1.6.58.10 | TableatmDxiPSapTable | not-accessible | mandatory | A table containing information pertaining to one public service access point (PSAP). |
| 1.3.6.1.4.1.495.2.1.6.58.10.1 | RowatmDxiPSapEntry | not-accessible | mandatory | Defines an entry in the Public Service Access Point group. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.1 | ColumnatmDxiPSapNumber | read-only | mandatory | Identifies this PSAP (public service access point) with a numerical value. Values are unique per public service access point. Value 0 is reserved for the PSAP … |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.5 | ColumnatmDxiPSapConnectTimer | read-write | mandatory | Determines the number of seconds between attempts to establish a connection for a DXI to ATM circuit mapping. A connection is attempted only for defined non-co… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.10 | ColumnatmDxiPSapControl | write-only | mandatory | Permits control of a specific PSAP (public service access point). Options: clearStats (1): Clear all statistics stored by statistics objects. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.15 | ColumnatmDxiPSapState | read-only | mandatory | Indicates the current state of this PSAP (public service access point). Options: offline (1): Indicates a newly created public service access point whose confi… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.20 | ColumnatmDxiPSapTxFrames | read-only | mandatory | Indicates the number of frames transmitted by this public service access point. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.21 | ColumnatmDxiPSapRxFrames | read-only | mandatory | Indicates the number of frames received by this public service access point. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.22 | ColumnatmDxiPSapTxOctets | read-only | mandatory | Indicates the number of octets transmitted by this public service access point. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.23 | ColumnatmDxiPSapRxOctets | read-only | mandatory | Indicates the number of octets received by this public service access point. |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.24 | ColumnatmDxiPSapOutSuccessfullConnects | read-only | mandatory | Indicates the number of successful outgoing connections established by this PSAP (public service access point). An outgoing connection is always attempted from… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.25 | ColumnatmDxiPSapOutUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful outgoing connections attempted by this PSAP (public service access point). An outgoing connection is always attempted from… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.26 | ColumnatmDxiPSapInConnectsReceived | read-only | mandatory | Indicates the number of connect attempts received at this PSAP (public service access point). An incoming connection is always attempted from the Inter-Applica… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.27 | ColumnatmDxiPSapTxResets | read-only | mandatory | Indicates the number of reset frames sent by this PSAP (public service access point). |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.28 | ColumnatmDxiPSapRxResets | read-only | mandatory | Indicates the number of reset frames received by this PSAP (public service access point). |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.35 | ColumnatmDxiPSapNoServiceDiscards | read-only | mandatory | Indicates the number of frames received from the ATM protocol stack which have been discarded by this PSAP (public service access point) because: - the DXI por… |
| 1.3.6.1.4.1.495.2.1.6.58.10.1.36 | ColumnatmDxiPSapCongestionDiscards | read-only | mandatory | Indicates the number of received frames discarded due to system congestion. |
| 1.3.6.1.4.1.495.2.1.6.58.11 | TableatmDxiSapTable | not-accessible | mandatory | A table containing information pertaining to one service access point (interface). |
| 1.3.6.1.4.1.495.2.1.6.58.11.1 | RowatmDxiSapEntry | not-accessible | mandatory | Defines an entry in the Service Access Point group. |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.5 | ColumnatmDxiSapMode | read-write | mandatory | Defines the DXI operating mode to be used at the service access point. |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.6 | ColumnatmDxiSapTransparentDfa | read-write | mandatory | Identifies the DXI frame address to use when the associated sap is configured for the transparent mode of operation (object atmDxiSapMode, value 'modeTranspare… |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.10 | ColumnatmDxiSapControl | write-only | mandatory | Permits control of this SAP (service access point). Options: clearStats (1): Clear all statistics stored by statistics objects maintained within the service ac… |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.20 | ColumnatmDxiSapRxLmiFrames | read-only | mandatory | Indicates the number of DXI LMI (link management interface) frames received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.21 | ColumnatmDxiSapNoRouteDiscards | read-only | mandatory | Indicates the number of frames received from a DXI port which have been discarded by this SAP (service access point) because: - no route was associated with th… |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.22 | ColumnatmDxiSapRxInvalidDiscards | read-only | mandatory | Indicates the following: - number of incorrectly formatted DXI frames received by this SAP - number of frames received whose length is less than the minimum ac… |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.23 | ColumnatmDxiSapCongestionDiscards | read-only | mandatory | Indicates the number of received frames discarded at this SAP (service access point) due to system congestion. |
| 1.3.6.1.4.1.495.2.1.6.58.11.1.24 | ColumnatmDxiSapFlowControlDiscards | read-only | mandatory | Indicates the number of frames received from a DXI port which have been discarded by this SAP (service access point) because the associated route was flow cont… |
| 1.3.6.1.4.1.495.2.1.6.58.12 | TableatmDxiSysRouteTable | not-accessible | mandatory | A table containing associations between ATM DXI circuits at DXI ports, and ATM circuits at a UNI port. Associations (routes) permit interconnectivity between t… |
| 1.3.6.1.4.1.495.2.1.6.58.12.1 | RowatmDxiSysRouteEntry | not-accessible | mandatory | Defines an entry in the Route group. |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.1 | ColumnatmDxiSRDxiFrameAddress | read-only | mandatory | Identifies the DXI frame address which when combined with the ifIndex, uniquely identifies a DXI circuit. |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.2 | ColumnatmDxiSRRowStatus | read-write | mandatory | Determines the status of the objects in this row. Options: invalid (1): The row is deleted from the table immediately, however, values are still in effect unti… |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.3 | ColumnatmDxiSRDestAlias | read-write | mandatory | Determines the textual name of the destination service this route connects to. When attempting a DXI circuit connection to an ATM circuit, this object specifie… |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.4 | ColumnatmDxiSRSubRef | read-write | mandatory | Specifies a reference number that is used by layers supporting circuit consolidation, such as the FRIM, and must be unique for all routes sharing the same dest… |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.10 | ColumnatmDxiSRRouteState | read-only | mandatory | Indicates the status of this route. Options: offLine (1): Indicates that the ATM DXI SAP this route is associated with does not exist or is offline. notConnect… |
| 1.3.6.1.4.1.495.2.1.6.58.12.1.11 | ColumnatmDxiSRFailureReason | read-only | mandatory | Indicates the status of a failed connection. The value of this object is only valid between attempts to establish the route connection atmDxiSRRouteState = not… |
| 1.3.6.1.4.1.495.2.1.6.58.13 | TableatmDxiSysRouteStatsTable | not-accessible | mandatory | A table containing statistics for established routes in the route table. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1 | RowatmDxiSysRouteStatsEntry | not-accessible | mandatory | Defines an entry in the Route Statistics group. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.1 | ColumnatmDxiSRStatsDxiFrameAddress | read-only | mandatory | Identifies the DXI frame address, which when combined with the ifIndex, uniquely identifies a DXI circuit. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.2 | ColumnatmDxiSRStatsCreationTime | read-only | mandatory | Indicates the system clock's time at which this connection was created. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.3 | ColumnatmDxiSRStatsNegotiatedDataSize | read-only | mandatory | Indicates the data size of a frame negotiated at connection. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.4 | ColumnatmDxiSRStatsTxFrames | read-only | mandatory | Indicates the number of frames transmitted by this connection. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.5 | ColumnatmDxiSRStatsRxFrames | read-only | mandatory | Indicates the number of frames received by this connection. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.6 | ColumnatmDxiSRStatsTxOctets | read-only | mandatory | Indicates the number of octets transmitted by this connection. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.7 | ColumnatmDxiSRStatsRxOctets | read-only | mandatory | Indicates the number of octets received by this connection. |
| 1.3.6.1.4.1.495.2.1.6.58.13.1.8 | ColumnatmDxiSRStatsFlowControlDiscards | read-only | mandatory | Indicates the number of frames which were destined for this route but were discarded due to flow control from the remote. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dfa | INTEGER (0..1023) | ||
| DfaX | INTEGER (0..16777216) | ||
| PSapIndex | INTEGER (0..0) | ||
| SubRef | INTEGER (0..255) | ||
| Vci | INTEGER (0..65535) | ||
| Vpi | INTEGER (0..255) |