CXBOPIO-MIB
140 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxBOPIO |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.36.1 | NodebopPortStatusChange | Indicates that the hardware port associated with the service access point has changed state. It has toggled between any of the states defined in object bopStat… | ||
| 1.3.6.1.4.1.495.2.1.6.36.1 | TablebopSapOprTable | not-accessible | mandatory | A table containing the current configuration information about each BOP/COP port. |
| 1.3.6.1.4.1.495.2.1.6.36.1.1 | RowbopSapOprEntry | not-accessible | mandatory | The configuration information for a specific BOP/COP port. |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.1 | ColumnbopSapOprNumber | read-only | mandatory | Defines the SAP ID using 2,3 or 4 digits. The first digit (A) is the slot #, the second digit (B) is the port #, and the remaining digits (CD) are the channel … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.2 | ColumnbopSapOprAlias | read-only | mandatory | Determines the active textual name uniquely identifying this port SAP. Range of Values: 0 - 16 alphanumeric characters beginning with a non-numeric character D… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.3 | ColumnbopSapOprProtocol | read-only | mandatory | Determines if the port is HDLC or Bisync. Only HDLC is supported by ISDN and T1/E1 ports. Indicates in the operative configuration the type of bisync protocol … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.5 | ColumnbopSapOprPortClockSource | read-only | mandatory | Determines the active data clock source for this port. Options: internal (1): Tx and Rx clocks are internally generated external (2): Tx and Rx clocks are exte… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.6 | ColumnbopSapOprPortSpeed | read-only | mandatory | Determines the input and output speed in bits per second for this port. Note: Meaningful only if 'bopSapOprPortClockSource' is 'internal' or 'split'. Ranges of… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.7 | ColumnbopSapOprPortDuplex | read-only | mandatory | Determines whether this port is communicating simultaneously in both directions (full-duplex) or alternates between directions (half-duplex). Not applicable fo… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.8 | ColumnbopSapOprPortMaxFrameSize | read-only | mandatory | Determines the active maximum frame size supported by this port. Ranges of Values: 32-9000 Default Value: 1,600 (512 for ISDN) |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.9 | ColumnbopSapOprPortDataEncoding | read-only | mandatory | Determines the active data formatting and encoding used by this port. Options: n/a (0): object is not applicable nrz (1): NRZ (locked for ISDN 'D' channel; ISD… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.10 | ColumnbopSapOprPortIdleCondition | read-only | mandatory | Determines the active idle line condition supported by this port. Options: flags (1): flags marks (2): marks as400 (3): AS400 Default Value: flags |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.11 | ColumnbopSapOprPortPreAmbleLength | read-only | mandatory | Determines the minimum number of flags or sync pairs that will be inserted between frames by the port's transmitter. For HDLC frames: A value of zero causes fl… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.12 | ColumnbopSapOprPortFlagSharing | read-only | obsolete | Determines whether back-to-back Tx frames share opening and closing flag. This value is meaningful only if 'bopSapAdmPortPreAmbleLength' is set to zero. Option… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.13 | ColumnbopSapOprPortFilterMask | read-only | obsolete | Indicates which bits of the 8-bit HDLC address are being used for address filtering on this port (CX900 or USIO only). Note: When a bit is set to '1', the posi… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.14 | ColumnbopSapOprPortFilterAddress1 | read-only | obsolete | Indicates one of four 8-bit addresses used for address filtering (CX900 or USIO only). Ranges of Values: 0 - 255 Default Value: 126 |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.15 | ColumnbopSapOprPortFilterAddress2 | read-only | obsolete | Indicates one of four 8-bit addresses used for address filtering (CX900 or USIO only). Ranges of Values: 0 - 255 Default Value: 126 |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.16 | ColumnbopSapOprPortFilterAddress3 | read-only | obsolete | Indicates one of four 8-bit addresses used for address filtering (CX900 or USIO only). Ranges of Values: 0 - 255 Default Value: 126 |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.17 | ColumnbopSapOprPortFilterAddress4 | read-only | obsolete | Indicates one of four 8-bit addresses used for address filtering (CX900 or USIO only). Ranges of Values: 0 - 255 Default Value: 126 |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.18 | ColumnbopSapOprPortCrc | read-only | obsolete | Determines which algorithm is being used for error detection. Options: crc-ccitt (1): CRC-ITU-T (uses X15+X12+X5+1 polynomial; ITU-T formerly CCITT) (locked fo… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.19 | ColumnbopSapOprPortDtrUpTimer | read-only | mandatory | Determines the time in seconds that the port must wait for DCD (DTR if DCE) after raising DTR (DCD if DCE) to determine if a connection can be established. Thi… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.20 | ColumnbopSapOprPortTxWindow | read-only | mandatory | Determines the active maximum number of buffers that may be queued onto the port driver (for transmission) by the associated upper layer. For ISDN ports, the v… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.21 | ColumnbopSapOprPortDialMode | read-only | mandatory | Identifies the operation mode when setting up connections. Options: n/a (0): object is not applicable dial-in-only (1): Only accept incoming calls; Will not ma… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.28 | ColumnbopSapOprPortLoopback | read-only | mandatory | Determines whether loopback is enabled and what kind of loopback is enabled. Options: n/a (0): object is not applicable none (1): Loopback is not enabled local… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.29 | ColumnbopSapOprPortSignalSamplingPeriod | read-write | mandatory | Determines the active sampling period in 100 millisecond increments that this port uses to sample signals. This object has no meaning in ISDN connections. Rang… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.30 | ColumnbopSapOprPortDcdDtrSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating DCD (DTR if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.31 | ColumnbopSapOprPortCtsRtsSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating CTS (RTS if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.32 | ColumnbopSapOprPortDsrDrsSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating DRS (DSR if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.33 | ColumnbopSapOprPortTmLlSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating TM (LL if DCE). This object has no meaning in ISDN connections. Ran… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.34 | ColumnbopSapOprPortRiRlSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating RI (RL if DCE). This object has no meaning in ISDN connections. Ran… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.35 | ColumnbopSapOprPortStatisticsTimer | read-only | mandatory | Determines the active period in seconds during which BOP performance statistics are measured. Note: If set to zero, BOP performance statistics are not measured… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.36 | ColumnbopSapOprPortCarrierAction | read-write | mandatory | Determines if the port driver informs it's associated upper layer that service is no longer available following loss of DCD if DTE, or DTR if DCE. Options: dis… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.37 | ColumnbopSapOprPortDataGenerator | read-write | mandatory | Determines whether this port acts as an internal data generator. Options: n/a (0): object is not applicable disabled (1): port is not a data generator enabled … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.38 | ColumnbopSapOprPortGenFrames | read-write | mandatory | Determines the number of frames that the port configured as an internal data generator will generate at one time. Ranges of Values: 0 - 255 Note: When set to z… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.39 | ColumnbopSapOprPortGenFrameSize | read-write | mandatory | Determines the size in bytes of internally generated frames (excluding flags). Ranges of Values: 2 - 65,535 Note: When set to zero, frames are sized randomly. … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.40 | ColumnbopSapOprPortGenFrameHeader | read-write | mandatory | Determines the 16-bit header that is inserted in the first two octets after the opening flag of each internally generated frame. Ranges of Values: 0 - 65,535 D… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.41 | ColumnbopSapOprPortThreshBandwidth | read-only | mandatory | Determines the value of the minimum critical bandwidth that determines whether Frame Relay should filter certain restricted types of packets or not. The value … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.42 | ColumnbopSapOprPortActualSpeed | read-only | mandatory | Determines the actual calculated output speed in bits per second of the port. Ranges of Values: 375 - 2,048,000 Default Value: 0 |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.43 | ColumnbopSapOprCodeSet | read-only | mandatory | Indicates the code used to communicate with the Bisync device. Options: (0) N/A: object is not applicable (1) EBCDIC code set (2) ASCII code set Default value:… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.44 | ColumnbopSapOprParity | read-only | mandatory | Indicates the parity used to communicate with the Bisync device Options: (0) N/A: Object is not applicable (1) none: No parity (2) odd: Odd parity (3) even: Ev… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.47 | ColumnbopOprPortTrap | read-write | mandatory | Determines whether this port produces a 'bopPortStatusChange' trap which can be retrieved by SNMP network management. Options: disabled (1): do not produce por… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.48 | ColumnbopOprTxClockTrap | read-write | mandatory | Determines whether this port produces a 'bopTxClockStatusChange' trap which can be retrieved by SNMP network management. Options: disabled (1): do not produce … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.52 | ColumnbopOprControlLine | write-only | mandatory | Controls the state of the port. Options: forceDown (1): forces the port into a 'down' state forceUp (2): forces the port into an 'up' state forceReset (3): for… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.53 | ColumnbopOprControlStats | write-only | mandatory | Specifies that port statistics are to be cleared. Options: clearSapStats (1): clears port statistics Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.55 | ColumnbopStatOprPortType | read-only | mandatory | Indicates the type of hardware strapping for the port. Options: unknown (1): unknown strapping dte (2): DTE strapping dce (3): DCE strapping Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.56 | ColumnbopStatOprPortInterfaceType | read-only | mandatory | Indicates the type of hardware interface of the port. Options: unknown (1) rs232d (2): V.24 v35 (3): V.35 x21(4): X.21 v34 (5): V.34 modem dds (6): 56K DSU/CSU… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.57 | ColumnbopStatOprPortState | read-only | mandatory | Indicates the state of availability of the port. Options: portUp (1): port is up portDown (2): port is down portShutDown (3): port has been shut down portDownB… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.61 | ColumnbopStatOprTxClockState | read-only | mandatory | Indicates the state availability of the transmit clock. Options: txClockDown (1): transmit clock is down txClockUp (2): transmit clock is up Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.62 | ColumnbopStatOprDCDState | read-only | mandatory | Indicates the state of the DCD signal. Options: unknown (1): DCD signal is in unknown state because hardware is not present inactive(2): DCD signal is low acti… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.63 | ColumnbopStatOprDTRState | read-only | mandatory | Indicates the state of the DTR signal. Options: unknown (1): DTR signal is in unknown state because hardware is not present inactive (2): DTR signal is low act… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.64 | ColumnbopStatOprRTSState | read-only | mandatory | Indicates the state of the RTS signal. Options: unknown (1): RTS signal is in unknown state because hardware is not present inactive (2): RTS signal is low act… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.65 | ColumnbopStatOprCTSState | read-only | mandatory | Indicates the state of the CTS signal. Options: unknown (1): CTS signal is in unknown state because hardware is not present inactive (2): CTS signal is low act… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.66 | ColumnbopStatOprDSRState | read-only | mandatory | Indicates the state of the DSR signal. Options: unknown (1): DSR signal is in unknown state because hardware is not present inactive (2): DSR signal is low act… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.67 | ColumnbopStatOprDRSState | read-only | mandatory | Indicates the state of the DRS signal. Options: unknown (1): DRS signal is in unknown state because hardware is not present inactive (2): DRS signal is low act… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.68 | ColumnbopStatOprTMState | read-only | mandatory | Indicates the state of the TM signal. Options: unknown (1): TM signal is in unknown state because hardware is not present inactive (2): TM signal is low active… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.69 | ColumnbopStatOprLLState | read-only | mandatory | Indicates the state of the LL signal. Options: unknown (1): LL signal is in unknown state because hardware is not present inactive (2): LL signal is low active… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.70 | ColumnbopStatOprRIState | read-only | mandatory | Indicates the state of the RI signal. Options: unknown (1): RI signal is in unknown state because hardware is not present inactive (2): RI signal is low active… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.71 | ColumnbopStatOprRLState | read-only | mandatory | Indicates the state of the RL signal. Options: unknown (1): RL signal is in unknown state because hardware is not present inactive (2): RL signal is low active… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.75 | ColumnbopStatOprTxFrames | read-only | mandatory | Indicates the total number of Tx frames since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.76 | ColumnbopStatOprRxFrames | read-only | mandatory | Indicates the total number of Rx frames since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.77 | ColumnbopStatOprLocalLoopbackFrames | read-only | mandatory | Indicates the total number of frames locally looped back since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.78 | ColumnbopStatOprTxBps | read-only | mandatory | Indicates the number of transmitted bits divided by the number of seconds set in 'bopSapOprPortStatisticsTimer'. Ranges of Values: 0 - 4,294,967,295 Default Va… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.79 | ColumnbopStatOprRxBps | read-only | mandatory | Indicates the number of received bits divided by the number of seconds set in 'bopSapOprPortStatisticsTimer'. Ranges of Values: 0 - 4,294,967,295 Default Value… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.80 | ColumnbopStatOprTxBpsMax | read-only | mandatory | Indicates the highest number of bits per second transmitted since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.81 | ColumnbopStatOprRxBpsMax | read-only | mandatory | Indicates the highest number of bits per second received since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.82 | ColumnbopStatOprTxFps | read-only | mandatory | Indicates the number of transmitted frames divided by the number of seconds set in 'bopSapOprPortStatisticsTimer'. Ranges of Values: 0 - 4,294,967,295 Default … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.83 | ColumnbopStatOprRxFps | read-only | mandatory | Indicates the number of received frames divided by the number of seconds set in 'bopSapOprPortStatisticsTimer'. Ranges of Values: 0 - 4,294,967,295 Default Val… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.84 | ColumnbopStatOprTxFpsMax | read-only | mandatory | Indicates the highest number of frames per second transmitted since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.85 | ColumnbopStatOprRxFpsMax | read-only | mandatory | Indicates the highest number of frames per second received since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.86 | ColumnbopStatOprTxUnderrunFrames | read-only | mandatory | Indicates the total number of underrun frames that have been unsuccessfully transmitted since statistics were last reset. Ranges of Values: 0 - 4,294,967,295 D… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.87 | ColumnbopStatOprTxCtsLostFrames | read-only | mandatory | Indicates the total number of frames unsuccessfully transmitted in half-duplex because CTS was dropped during transmission. Ranges of Values: 0 - 65,535 Defaul… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.88 | ColumnbopStatOprTxBadStateDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to a request for frame transmission while the port was down ('bopStatOprPo… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.89 | ColumnbopStatOprTxResetDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to a management request for a line reset. Ranges of Values: 0 - 65,535 Def… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.90 | ColumnbopStatOprTxSysCongestionDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to system congestion. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.91 | ColumnbopStatOprTxInvWinDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to the transmit window being exceeded. Ranges of Values: 0 - 65,535 Defaul… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.92 | ColumnbopStatOprTxInvRLpbkWinDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to the transmit window being exceeded while in loopback mode. Ranges of Va… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.98 | ColumnbopStatOprRxBadCrcFrames | read-only | mandatory | Indicates the total number of bad CRC frames received since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.99 | ColumnbopStatOprRxAbortedFrames | read-only | mandatory | Indicates the total number of aborted frames received since statistics were last reset. Note: A frame is aborted when the port's receiver detects seven consecu… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.100 | ColumnbopStatOprRxNonIntegralBitFrames | read-only | mandatory | Indicates the total number of frames received since statistics were last reset, that did not have eight bits per byte. Note: Non-integral bit frames cannot be … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.101 | ColumnbopStatOprRxLongFrames | read-only | mandatory | Indicates the total number of long frames received since statistics were last reset. Note: A long frame is counted each time a received frame exceeds the permi… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.102 | ColumnbopStatOprRxOverrunFrames | read-only | mandatory | Indicates the total number of overrun frames received since statistics were last reset. Note: An overrun indicates that a frame's contents have been corrupted … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.103 | ColumnbopStatOprRxCdLostFrames | read-only | mandatory | Indicates the total number of frames received with DCD loss in half-duplex by the port. Ranges of Values: 0 - 65, 535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.104 | ColumnbopStatOprRxBadStateDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, because BOP software layer was not bound to other layers. Ranges of Values: 0 … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.105 | ColumnbopStatOprRxBusyDiscards | read-only | mandatory | Indicates the total number of frames discarded since statistics were last reset, due to a lack of receive buffers. Ranges of Values: 0 - 65,535 Default Value: … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.109 | ColumnbopStatOprPortStateChanges | read-only | mandatory | Indicates the total number of times the port has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: … |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.110 | ColumnbopStatOprTxClockStateChanges | read-only | mandatory | Indicates the total number of times that 'bopStatOprTxClockState' has moved from one state to another since were last reset. Ranges of Values: 0 - 65,535 Defau… |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.111 | ColumnbopStatOprDCDStateChanges | read-only | mandatory | Indicates the total number of times DCD has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.112 | ColumnbopStatOprDTRStateChanges | read-only | mandatory | Indicates the total number of times DTR has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.113 | ColumnbopStatOprRTSStateChanges | read-only | mandatory | Indicates the total number of times RTS has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.114 | ColumnbopStatOprCTSStateChanges | read-only | mandatory | Indicates the total number of times CTS has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.115 | ColumnbopStatOprDSRStateChanges | read-only | mandatory | Indicates the total number of times DSR has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.116 | ColumnbopStatOprDRSStateChanges | read-only | mandatory | Indicates the total number of times DRS has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.117 | ColumnbopStatOprTMStateChanges | read-only | mandatory | Indicates the total number of times TM has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.118 | ColumnbopStatOprLLStateChanges | read-only | mandatory | Indicates the total number of times LL has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.119 | ColumnbopStatOprRIStateChanges | read-only | mandatory | Indicates the total number of times RI has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.120 | ColumnbopStatOprRLStateChanges | read-only | mandatory | Indicates the total number of times RL has moved from one state to another since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.121 | ColumnbopStatOprPortResets | read-only | mandatory | Indicates the total number of port resets that have occurred at the port since statistics were last reset. Ranges of Values: 0 - 65,535 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.36.1.1.123 | ColumnbopStatOprRxGenError | read-only | mandatory | Indicates the total number of frames received in error since statistics were last reset, while 'bopSapOprPortDataGenerator' was set to 'enabled-verify'. Ranges… |
| 1.3.6.1.4.1.495.2.1.6.36.2 | TablebopSapAdmTable | not-accessible | mandatory | A table containing the planned configuration information about each BOP/COP port. |
| 1.3.6.1.4.1.495.2.1.6.36.2 | NodebopTxClockStatusChange | Indicates that the transmit clock at hardware port associated with the service access point has changed state. It has toggled between any of the states defined… | ||
| 1.3.6.1.4.1.495.2.1.6.36.2.1 | RowbopSapAdmEntry | not-accessible | mandatory | The planned configuration information for a specific BOP/COP port. |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.1 | ColumnbopSapAdmNumber | read-only | mandatory | Defines the SAP ID using 2,3 or 4 digits. The first digit (A) is the slot #, the second digit (B) is the port #, and the remaining digits (CD) are the channel … |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.2 | ColumnbopSapAdmAlias | read-write | mandatory | Determines the textual name uniquely identifying this SAP in the BOP Driver software layer. Ranges of Values: 0-16 alphanumeric characters beginning with a non… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.3 | ColumnbopSapAdmProtocol | read-write | mandatory | Determines if the port is HDLC or Bisync. Only HDLC is supported by ISDN and T1/E1 ports. Indicates in the operative configuration the type of bisync protocol … |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.5 | ColumnbopSapAdmPortClockSource | read-write | mandatory | Determines the bit-rate clock source of the port. Options: internal (1): Tx and Rx clocks are internally generated external (2): Tx and Rx clocks are externall… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.6 | ColumnbopSapAdmPortSpeed | read-write | mandatory | Indicates the input and output speed in bits per second of the port. Note: This value is meaningful only if 'bopSapAdmPortClockSource' is set to 'internal' or … |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.7 | ColumnbopSapAdmPortDuplex | read-write | mandatory | Determines whether the port communicates simultaneously in both directions (full-duplex) or alternates between directions (half-duplex). Options: half (1): hal… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.8 | ColumnbopSapAdmPortMaxFrameSize | read-write | mandatory | Determines the maximum frame size supported by the port. Ranges of Values: 32-9000 Default Value: 1,600 (512 for ISDN) Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.9 | ColumnbopSapAdmPortDataEncoding | read-write | mandatory | Determines the data formatting and encoding used by the port. Options: nrz (1): NRZ (locked for ISDN 'D' channel; ISDN 'B' channel can use only this value or N… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.10 | ColumnbopSapAdmPortIdleCondition | read-write | mandatory | Determines the idle line condition supported by the port. Options: flags (1): flags marks (2): marks as400 (3): AS400 Default Value: flags Configuration Change… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.11 | ColumnbopSapAdmPortPreAmbleLength | read-write | mandatory | Determines the minimum number of flags or sync pairs that will be inserted between frames by the port's transmitter. For HDLC frames: A value of zero causes fl… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.12 | ColumnbopSapAdmPortFlagSharing | read-write | obsolete | Determines whether back-to-back transmit frames will have a flag in common This value is meaningful only if 'bopSapAdmPortPreAmbleLength' is set to zero. Optio… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.13 | ColumnbopSapAdmPortFilterMask | read-write | obsolete | Determines which bits of the 8-bit HDLC address will be used for address filtering. Note: When a bit is set to '1', the position of bits will be checked. When … |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.14 | ColumnbopSapAdmPortFilterAddress1 | read-write | obsolete | Determines one of four 8-bit addresses used for address filtering. Ranges of Values: 0-255 Default Value: 126 Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.15 | ColumnbopSapAdmPortFilterAddress2 | read-write | obsolete | Determines one of four 8-bit addresses used for address filtering. Ranges of Values: 0-255 Default Value: 126 Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.16 | ColumnbopSapAdmPortFilterAddress3 | read-write | obsolete | Determines one of four 8-bit addresses used for address filtering. Ranges of Values: 0-255 Default Value: 126 Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.17 | ColumnbopSapAdmPortFilterAddress4 | read-write | obsolete | Determines one of four 8-bit addresses used for address filtering. Ranges of Values: 0-255 Default Value: 126 Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.18 | ColumnbopSapAdmPortCrc | read-write | obsolete | Determines which algorithm is used for error detection. Options: crc-ccitt (1): CRC-ITU-T (uses X15+X12+X5+1 polynomial; ITU-T formerly CCITT) (locked for ISDN… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.19 | ColumnbopSapAdmPortDtrUpTimer | read-write | mandatory | Determines the time in seconds that the port must wait for DCD (DTR if DCE) after raising DTR (DCD if DCE) to determine if a connection can be established. Not… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.20 | ColumnbopSapAdmPortTxWindow | read-write | mandatory | Determines the maximum number of buffers that may be queued onto the port driver (for transmission) by the associated upper layer. For ISDN ports, the value is… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.21 | ColumnbopSapAdmPortThreshBandwidth | read-write | mandatory | Determines the value of the minimum critical bandwidth that will determine whether Frame Relay should filter certain restricted types of packets or not. The va… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.22 | ColumnbopSapAdmPortDialMode | read-write | mandatory | Identifies the operation mode when setting up connections. Options: dial-in-only (1): Only accept incoming calls; Will not make any outgoing calls. dial-out-on… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.28 | ColumnbopSapAdmPortLoopback | read-write | mandatory | Determines whether loopback is enabled and what kind of loopback is enabled. Options: none (1): Loopback is not enabled local (2): Local loopback is enabled (f… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.29 | ColumnbopSapAdmPortSignalSamplingPeriod | read-write | mandatory | Determines the sampling period in 100 millisecond increments used to sample detectable signals. Ranges of Values: 3-100 (locked at 5 for ISDN) Default Value: 5… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.30 | ColumnbopSapAdmPortDcdDtrSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating DCD (DTR if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.31 | ColumnbopSapAdmPortCtsRtsSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating CTS (RTS if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.32 | ColumnbopSapAdmPortDsrDrsSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating DSR (DRS if DCE). This object has no meaning in ISDN connections. R… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.33 | ColumnbopSapAdmPortTmLlSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating TM (LL if DCE). This object has no meaning in ISDN connections. Ran… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.34 | ColumnbopSapAdmPortRiRlSignalSamples | read-write | mandatory | Determines the active number of sampling periods that this port must wait before validating RI (RL if DCE). This object has no meaning in ISDN connections. Ran… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.35 | ColumnbopSapAdmPortStatisticsTimer | read-write | mandatory | Determines the period in seconds during which BOP performance statistics are measured. Note: If set to zero, BOP performance statistics are not measured. Range… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.36 | ColumnbopSapAdmPortCarrierAction | read-write | mandatory | Determines if the port driver informs it's associated upper layer that service is no longer available following loss of DCD if DTE, or DTR if DCE. Options: dis… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.37 | ColumnbopSapAdmPortDataGenerator | read-write | mandatory | Determines whether the port will act as an internal data generator. Options: disabled (1): port is not a data generator enabled (2): port is a data generator e… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.38 | ColumnbopSapAdmPortGenFrames | read-write | mandatory | Determines the number of frames that the port configured as an internal data generator will generate at one time. Ranges of Values: 0-255 Note: When set to zer… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.39 | ColumnbopSapAdmPortGenFrameSize | read-write | mandatory | Determines the size in bytes of internally generated frames (excluding flags). Ranges of Values: 2-65535 Note: When set to zero, frames are sized randomly. Def… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.40 | ColumnbopSapAdmPortGenFrameHeader | read-write | mandatory | Determines the 16-bit header that will be inserted in the first two octets after the opening flag of each internally generated frame. Ranges of Values: 0-65, 5… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.45 | ColumnbopSapAdmCodeSet | read-write | mandatory | Determines in the administrative configuration the code used by the port associated with this SAP to communicate to the Bisync device. Options: other ebcdic = … |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.46 | ColumnbopSapAdmParity | read-write | mandatory | Indicates the parity used to communicate with the Bisync device Options: (1) none: No parity (2) odd: Odd parity (3) even: Even parity (4) space: Low parity (a… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.47 | ColumnbopAdmPortTrap | read-write | mandatory | Determines whether this port produces a 'bopPortStatusChange' trap which can be retrieved by SNMP network management. Options: disabled (1): do not produce por… |
| 1.3.6.1.4.1.495.2.1.6.36.2.1.48 | ColumnbopAdmTxClockTrap | read-write | mandatory | Determines whether this port produces a 'bopTxClockStatusChange' trap which can be retrieved by SNMP network management. Options: disabled (1): do not produce … |
| 1.3.6.1.4.1.495.2.1.6.36.3 | ScalarbopMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |