CXGIM-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.55.1 | ScalargimSysRouteConnectInterval | read-write | mandatory | Determines the number of seconds between attempts to establish a connection for a X25 system route. A connection is attempted only for defined non-connected ro… |
| 1.3.6.1.4.1.495.2.1.6.55.2 | ScalargimMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.55.10 | TablegimSapTable | not-accessible | mandatory | A table containing configuration information about each X25 convergence service access point. Service access points of this type exist at the upper interface o… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1 | RowgimSapEntry | not-accessible | mandatory | Defines a row in the Service Access Point Configuration table. Each row contains the objects which are used to define a service access point upper interface of… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.1 | ColumngimSapType | read-only | mandatory | Identifies the type of this SAP (service access point) with a numerical value. Values are unique for each type. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.2 | ColumngimSapNumber | read-only | mandatory | Identifies this SAP (service access point) with a numerical value. Values are unique for each service access point. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.3 | ColumngimSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.4 | ColumngimSapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 -16 alphanumeri… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.5 | ColumngimSapCompanionAlias | read-write | mandatory | Determines the name which uniquely identifies the X.25 Upper SAP (service access point) which will communicate with this SAP. Range of Values: 1 -16 alphanumer… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.6 | ColumngimSapInactivityTimer | read-write | mandatory | Defines the time of inactivity, in seconds, after which the SAP (service access point) will send a disconnect request to the X25 layer. The timer starts whenev… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.7 | ColumngimSapProtocolId | read-write | mandatory | Defines the protocol format that is used for incoming call or call request packets to the X.25 call data field. The field consists of 4 hexadecimal octets wher… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.8 | ColumngimSapAddress | read-write | mandatory | Defines the calling address for this SAP (service access point). Range of Values: 1 to 15 digits Default Value: 0 Configuration Changed: Operative |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.10 | ColumngimSapControl | write-only | mandatory | Permits control of a specific SAP (service access point). Options: clearStats (1): Clear all statistics stored by statistics objects. Configuration Changed: op… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.12 | ColumngimSapState | read-only | mandatory | Indicates the current state of this SAP (service access point). Options: offLine (1): Indicates a newly created service access point whose configuration has no… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.13 | ColumngimSapLinkState | read-only | mandatory | Indicates the current state of the x25 link for this SAP (service access point). Options: notConnected (1): There is no x25 circuit established associated with… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.15 | ColumngimSapTxFrames | read-only | mandatory | Indicates the number of frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.16 | ColumngimSapRxFrames | read-only | mandatory | Indicates the number of frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.17 | ColumngimSapTxOctets | read-only | mandatory | Indicates the number of octets transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.18 | ColumngimSapRxOctets | read-only | mandatory | Indicates the number of octets received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.19 | ColumngimSapOutSuccessfullConnects | read-only | mandatory | Indicates the number of successful outgoing connections established by this SAP (service access point). An outgoing connection is always attempted from X25 con… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.20 | ColumngimSapOutUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful outgoing connections attempted by this SAP (service access point). An outgoing connection is always attempted from X25 con… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.21 | ColumngimSapInSuccessfullConnects | read-only | mandatory | Indicates the number of successful incoming connections established at this SAP (service access point). An incoming connection is always attempted from the Int… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.22 | ColumngimSapInUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful incoming connections attempted at this SAP (service access point). An incoming connection is always attempted from the Int… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.23 | ColumngimSapUnopenedServiceDiscards | read-only | mandatory | This object applies only to the PSAP (public service access point). Indicates the number of frames received and discarded by the PSAP because: - no route was a… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.24 | ColumngimSapTxResets | read-only | mandatory | This object applies only to the PSAP (public service access point). Indicates the number of Inter- Application Module (IAM) reset frames sent by the PSAP. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.25 | ColumngimSapRxResets | read-only | mandatory | This object applies only to the PSAP. Indicates the number of Inter- Application Module (IAM) reset frames received by the PSAP. |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.50 | ColumngimSapRxThruputClass | read-write | mandatory | Defines the default receive throughput class that is used at this SAP (service access point). Range of Values: 75 - 64000 bps Default Value: 9600 bps Configura… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.51 | ColumngimSapTxThruputClass | read-write | mandatory | Defines the default transmit throughput class that is used at this SAP (service access point). Range of Values: 75 to 64000 bps Default Value: 9600 bps Configu… |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.52 | ColumngimSapTxPacketSize | read-write | mandatory | Defines the size of the transmit packet for the Xim layer. Range of Values: 16 to 4096 bytes Default Value: 128 bytes Configuration Changed: Operative |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.53 | ColumngimSapRxPacketSize | read-write | mandatory | Defines the size of the receive packet for the Xim layer. Range of Values: 16 to 4096 bytes Default Value: 128 bytes Configuration Changed: Operative |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.54 | ColumngimSapTxWindowSize | read-write | mandatory | Defines the size of the transmit window for the Xim layer. Range of Values: 1 to 127 Default Value: 2 Configuration Changed: Operative |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.55 | ColumngimSapRxWindowSize | read-write | mandatory | Defines the size of the receive window for the Xim layer. Range of Values: 1 to 127 Default Value: 2 Configuration Changed: Operative |
| 1.3.6.1.4.1.495.2.1.6.55.11 | TablegimSysRouteTable | not-accessible | mandatory | A table containing information about each X25 system route. Routes allow this X25 layer to link with another X25 layer across a frame relay network, or with th… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1 | RowgimSysRouteEntry | not-accessible | mandatory | Defines a row in the gimSysRouteTable. Each row contains the objects which define a system route. |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.1 | ColumngimSRSapType | read-only | mandatory | Identifies the type of service access point this route entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.2 | ColumngimSRSapNumber | read-only | mandatory | Identifies the service access point this route entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.3 | ColumngimSRRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.4 | ColumngimSRDestAlias | read-write | mandatory | Determines the textual name of the destination service this route connects to. When attempting a X25 connection across Frame Relay, this object specifies the n… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.5 | ColumngimSRSubRef | read-write | mandatory | Specifies a reference number that uniquely identifies this route. This number is used by the FRIM (Frame Relay Interface Module) to identify routes using the s… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.10 | ColumngimSRRouteStatus | read-only | mandatory | Indicates the connection status of this X25 route. Options: offLine (1): Indicates that the X25 Convergence SAP this route is associated with does not exist or… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.11 | ColumngimSRClearStatus | read-only | mandatory | Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (gimSRRouteStatus =… |
| 1.3.6.1.4.1.495.2.1.6.55.12 | TableximDteTable | not-accessible | mandatory | A table containing the DTE X.28 Selection command objects for each defined 'abbreviated address'. |
| 1.3.6.1.4.1.495.2.1.6.55.12.1 | RowximDteEntry | not-accessible | mandatory | The objects for a specific DTE X.28 Selection entry. |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.1 | ColumnximDteSapNumber | read-only | mandatory | Associates the DTE entries defined by the object 'ximDteDteNumber' with an xim sap number. |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.2 | ColumnximDteDteNumber | read-only | mandatory | Associates this DTE entry with the xim sap number defined by the object 'ximDteSapNumber', Currently the XIM will support ONLY one entry. |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.3 | ColumnximDteRowStatus | read-write | mandatory | Indicates whether this specific entry is configured within the MIB. Entries (rows) may be created by setting this object value to 'valid', or deleted by changi… |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.5 | ColumnximDteCalledAddress | read-write | mandatory | Defines the network address of a remote device for this DTE entry. Allowable values: 1 to 15 numerical digits. |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.12 | ColumnximDteFacilityField | read-write | mandatory | Defines the facility codes and parameters requires for the X.28 Selection command for this DTE entry. The facility codes and parameters must be entered as defi… |
| 1.3.6.1.4.1.495.2.1.6.55.12.1.13 | ColumnximDteUserDataField | read-write | mandatory | Defines the user data field of the X.28 Selection command for this DTE entry. A value of nul string (blank) means no user data. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DteIndex | INTEGER (1..255) | ||
| PacketSize | INTEGER { bytes16 (4), bytes32 (5), bytes64 (6), bytes128 (7), bytes256 (8), bytes512 (9), bytes1024 (10), bytes2048 (11), bytes4096 (12) } | ||
| PSapIndex | INTEGER (0..255) | ||
| SubRef | INTEGER (0..255) | ||
| TypeIndex | INTEGER (0..255) |