CXSDLC-MIB
61 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxSDLC SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.37.1 | TablesdlcSapTable | not-accessible | mandatory | This table contains configuration information that is used to manage the SDLC interface. Each row in the table defines either an upper or lower SAP (service ac… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1 | RowsdlcSapEntry | not-accessible | mandatory | Defines a row in the sdlcSapTable. Each row contains the objects which are used to define a service access point. |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.1 | ColumnsdlcSapNumber | read-only | mandatory | Identifies a SAP (service access point) in the sdlcSapTable. The table supports 8 SAPs. Numbers 1 to 4 are lower SAPs, and numbers 4 to 8 are upper SAPs. |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.2 | ColumnsdlcSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row will be del… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.3 | ColumnsdlcSapType | read-write | mandatory | Determines the SAP (service access point) type: - 'lower' identifies a SAP leading to a physical SDLC port. This SAP must be bound to an upper BOP SAP. - 'uppe… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.4 | ColumnsdlcSapCuType | read-write | mandatory | Determines the SAP type: HIU or TIU. Options: terminalInterfaceUnit (1): The SAP type is a TIU, which means it is connected to one or more control units (secon… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.5 | ColumnsdlcSapAlias | read-write | mandatory | The textual name that identifies this SAP (service access point). Names must be unique for all SDLC SAPs. Range of Values: 1 -16 alphanumeric characters (first… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.6 | ColumnsdlcSapCompanionAlias | read-write | mandatory | The textual name of the BOP SAP that binds with this SDLC SAP. Names must be unique for each service access point. Range of Values: 1 -16 alphanumeric characte… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.7 | ColumnsdlcSapSnalcRef | read-write | mandatory | This object applies only to lower SAPs (service access points). It indicates the sdlcSapNumber of the upper SDLC SAP that is associated with this lower SAP. Ra… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.8 | ColumnsdlcSapDuplex | read-write | mandatory | This object applies only to lower SAPs (service access points). It determines if the SAP operates in full-duplex or half-duplex mode. Range of Values: fulldupl… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.9 | ColumnsdlcSapRaiseDtrOnConnectReq | read-write | mandatory | Determines when the DTR signal is raised on the port connected to the SAP. Options: no (1): DTR is raised whether or not a connection request is received from … |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.10 | ColumnsdlcPollIntAfterAckTimer | read-write | mandatory | This object applies only to a service access point functioning as a TIU. Determines the length of time allowed to elapse between the reception of an acknowledg… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.11 | ColumnsdlcSapLineType | read-write | mandatory | Determines the type of SDLC line supported by this SAP (service access point). When using an HIU and TIU in tandem, the settings for this object on both must m… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.20 | ColumnsdlcSapControl | write-only | mandatory | Clears all statistics for this service access point. Options: clearStats (1): Clear statistics. Default Value: none Configuration Changed: administrative and o… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.30 | ColumnsdlcSapOperationalMode | read-only | mandatory | Indicates the state of this SAP (service access point). Options: offLine (1): Indicates that this SAP is not operational. onLine (2): Indicates that this SAP i… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.31 | ColumnsdlcSapLinkStatus | read-only | mandatory | Indicates the physical state of this SAP (service access point) with respect to its associated BOP SAP (sdlcSapCompanionAlias). Options: down (1): Indicates th… |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.40 | ColumnsdlcSapLinkChange | read-only | mandatory | Indicates the number of times that the physical link has been brought up. |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.41 | ColumnsdlcSapTxDataFrames | read-only | mandatory | Indicates the number of information frames sent by this SAP (service access point). |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.42 | ColumnsdlcSapRxDataFrames | read-only | mandatory | Indicates the number of information frames received by this SAP (service access point). |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.43 | ColumnsdlcSapConnectRequest | read-only | mandatory | Indicates the number of connection requests generated by the SNA Link Conversion layer. |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.44 | ColumnsdlcSapDisconnectRequest | read-only | mandatory | Indicates the number of connection clears generated by the SNA Link Conversion layer. |
| 1.3.6.1.4.1.495.2.1.6.37.1.1.45 | ColumnsdlcSapDisconnectIndication | read-only | mandatory | Indicates the number of connection clears sent to the SNA Link Conversion layer. |
| 1.3.6.1.4.1.495.2.1.6.37.2 | TablesdlcCuTable | not-accessible | mandatory | This table contains configuration for the control units associated with SDLC SAPs. Each row identifies one control unit. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1 | RowsdlcCuEntry | not-accessible | mandatory | Defines a row in the sdlcCuTable. Each row contains the objects which define one control unit (link station). Up to 64 link stations are supported across all S… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.1 | ColumnsdlcCuSap | read-only | mandatory | Determines the sdlcSapNumber of the SAP (service access point) this row (control unit) is associated with. More than one secondary link station can be associat… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.2 | ColumnsdlcCuId | read-write | mandatory | Determines the address of the control unit associated with this SAP. If this SAP is a TIU, it defines the address of the physical control unit attached to the … |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.3 | ColumnsdlcCuRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row will be del… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.4 | ColumnsdlcCuMaxFrameLength | read-write | mandatory | Determines the largest frame that can be sent and received by this control unit. The value of this object must match the setting on the host or control unit th… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.5 | ColumnsdlcCuTransmitWindow | read-write | mandatory | Determines the maximum number of information frames that can be outstanding at any given time. A frame is considered to be outstanding until the remote device … |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.6 | ColumnsdlcCuPollRetry | read-write | mandatory | This object applies only if this entry is associated with a TIU service access point. Determines the number of times an unacknowledged poll is retransmitted. A… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.7 | ColumnsdlcCuMaxRetry | read-write | mandatory | This object applies only if this entry is associated with a TIU service access point. Determines the number of times an unacknowledged DISC, SNRM, or XID is re… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.8 | ColumnsdlcCuWaitForNextSnrmOrXid | read-write | mandatory | This object applies only if this entry is associated with an HIU service access point. Determines what the HIU does when it receives a UA or XID response from … |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.9 | ColumnsdlcCuSendDisconnect | read-write | mandatory | Determines the command that is sent to disconnect the control unit. Options: no (1): A SNRM is sent to disconnect the control unit. yes (2): If entry is associ… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.10 | ColumnsdlcCuPollAckTimer | read-write | mandatory | This object applies only if this entry is associated with a TIU service access point. Defines the amount of time the TIU waits for the control unit (secondary … |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.11 | ColumnsdlcCuSlowPollTimer | read-write | mandatory | This object applies only if this entry is associated with a TIU service access point. Determines the amount of time the TIU waits for the control unit (seconda… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.13 | ColumnsdlcCuWaitForUaFromSnalcTimer | read-write | mandatory | If this entry is associated with an HIU SAP (service access point), it determines the maximum amount of time that the HIU waits for a response to a SNRM or DIS… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.30 | ColumnsdlcCuControl | write-only | mandatory | Clears all statistics for this control unit. Default Value: none Options: clearStats (1): Clear statistics. Configuration Changed: administrative and operative |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.40 | ColumnsdlcCuState | read-only | mandatory | Indicates the current status of the control unit. Options: normalDiscMode (1): This control unit is in Normal Disconnected Mode waitForSnrm (2): This control u… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.41 | ColumnsdlcCuOperationalMode | read-only | mandatory | Indicates the state of this control unit. Options: offLine (1): Indicates that this control unit is not operational. onLine (2): Indicates that this control un… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.42 | ColumnsdlcCuDiscReasonCode | read-only | mandatory | Provides the reason code which indicates why this SLDC control unit was disconnected. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.43 | ColumnsdlcCuSnalcDiscReasonCode | read-only | mandatory | Provides the reason code which indicates why the SNA Link Conversion layer disconnected this SLDC control unit. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.44 | ColumnsdlcCuConnectionStatus | read-only | mandatory | Indicates the state of the SNA link convergence connection for this control unit. Options: up (1): Indicates that the SNA link convergence connection is operat… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.50 | ColumnsdlcCuFramesInTransmitQueue | read-only | mandatory | Indicates the number of frames currently in the transmit queue for this control unit. The number of frames should be less than sdlcCuTransmitWindow. If not, th… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.51 | ColumnsdlcCuTxFrames | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of information frames transmitted to this control unit. If associated with an H… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.52 | ColumnsdlcCuRxFrames | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of information frames received from this control unit. If associated with an HI… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.55 | ColumnsdlcCuTimeOuts | read-only | mandatory | This object applies only if this entry is associated with a TIU service access point. Indicates the number of times the sdlcCuPollAckTimer and the sdlcCuSlowPo… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.56 | ColumnsdlcCuSnrmCount | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of SNRM frames transmitted to this control unit. If associated with an HIU serv… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.57 | ColumnsdlcCuXidCommand | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of XID frames transmitted to this control unit. If associated with an HIU servi… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.58 | ColumnsdlcCuXidResponse | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of SNRM frames transmitted to this control unit. If associated with an HIU serv… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.59 | ColumnsdlcCuUnnumberedAcks | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of UA responses received from this control unit. If associated with an HIU serv… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.60 | ColumnsdlcCuRetransmission | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of information frames retransmitted to this control unit. If associated with an… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.61 | ColumnsdlcCuDisconnectCount | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of DISC commands transmitted to this control unit. If associated with an HIU se… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.62 | ColumnsdlcCuDisconnectModeCount | read-only | mandatory | This object applies only if this entry is associated with a TIU service access point. Indicates the total number of DM (disconnect mode) response frames receiv… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.63 | ColumnsdlcCuTransmittedRNR | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of RNR frames transmitted to this control unit. If associated with an HIU servi… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.64 | ColumnsdlcCuReceivedRNR | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of RNR frames received from this control unit. If associated with an HIU servic… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.65 | ColumnsdlcCuFrameRejects | read-only | mandatory | If associated with a TIU service access point, this object indicates the number of FRMR response commands received from this control unit. If associated with a… |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.66 | ColumnsdlcCuRemoteDisc | read-only | mandatory | This object applies only if this entry is associated with an TIU service access point. Indicates the number of DISC frames transmitted by this control unit. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.67 | ColumnsdlcCuConnectionRequest | read-only | mandatory | Indicates the number of connections requested by the SNA link conversion layer for this control unit. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.68 | ColumnsdlcCuDisconnectionRequest | read-only | mandatory | Indicates the number of connection clear requests sent by the SNA link conversion layer for this control unit. |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.69 | ColumnsdlcCuDisconnectionIndication | read-only | mandatory | Indicates the number of connection cleared messages sent to the SNA link conversion layer for this control unit. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CuAddress | INTEGER (1..254) |