CXX25-MIB
226 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxX25 SapIndex ThruputClass |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.1 | Scalarx25LowerPoolThreshold | read-write | mandatory | Determines the minimum amount of system resources which are required by the X.25 layer. When system resources drop below this threshold, the X.25 layer clears … |
| 1.3.6.1.4.1.495.2.1.6.29.1 | Nodex25SapAlarm | For future use. Identifies the x25SapStatusEvent trap which has occurred. This trap is only generated when global object x25Alarms is set to value 'enabled'. O… | ||
| 1.3.6.1.4.1.495.2.1.6.29.2 | Nodex25ConfigErrorIndication | For future use. Identifies the x25ConfigErrorEvent trap which has occurred. This trap can always be generated. Options: x25SapNumber: The services access point… | ||
| 1.3.6.1.4.1.495.2.1.6.29.2 | Scalarx25UpperPoolThreshold | read-write | mandatory | Determines the amount of system resources which are required by the X.25 layer to avoid congestion. When system resources drop below this threshold, the X.25 l… |
| 1.3.6.1.4.1.495.2.1.6.29.3 | Scalarx25RouteMask | read-write | mandatory | Determines the number of digits to use for routing calls. If set to value '0', calls are routed normally, according to the called address specified. A value gr… |
| 1.3.6.1.4.1.495.2.1.6.29.4 | Scalarx25BillingSegmentSize | read-write | mandatory | Determines the size of billing data segments. Range of Values: 16 - 1024 bytes Default Value: 16 bytes Related Objects: x25Billing x25SapPvcBillingTimer x25Sap… |
| 1.3.6.1.4.1.495.2.1.6.29.5 | Scalarx25Billing | read-write | mandatory | Determines if this layer generates the x25BillingIndication trap. For switched virtual circuits the trap is generated each time a call is cleared. For permanen… |
| 1.3.6.1.4.1.495.2.1.6.29.6 | Scalarx25NetworkType | read-write | mandatory | Determines the format of the cause codes the X.25 layer adds to Reset, Restart, and Clear packets. Note: The X.25 layer will not generate Diagnostics packets f… |
| 1.3.6.1.4.1.495.2.1.6.29.7 | Scalarx25HuntGroupRotation | read-write | mandatory | Determines if hunt group members are rotated. Enabling rotation causes hunting to begin with a different hunt group member each time. For example, a group with… |
| 1.3.6.1.4.1.495.2.1.6.29.10 | Scalarx25Alarms | read-write | mandatory | For future use. Determines if this layer generates the x25SapAlarm trap. Options: disabled (1): This layer does not generate the x25SapAlarm trap. enabled (2):… |
| 1.3.6.1.4.1.495.2.1.6.29.11 | Scalarx25SapStatusEvent | read-only | mandatory | For future use. Indicates the status reported by an x25SapAlarm trap when it occurs. This object always returns the value 'noEvent' when read. Options: noEvent… |
| 1.3.6.1.4.1.495.2.1.6.29.12 | Scalarx25ConfigErrorEvent | read-only | mandatory | For future use. Indicates the status reported by an x25ConfigErrorIndication trap when it occurs. This object always returns the value 'noEvent' when read. Opt… |
| 1.3.6.1.4.1.495.2.1.6.29.19 | Scalarx25SoftwareVersions | read-only | mandatory | Identifies the X.25 software revision number, which is displayed as a string of five numbers each separated by a period (1.2.3.4.5). The five numbers represent… |
| 1.3.6.1.4.1.495.2.1.6.29.20 | Tablex25LogicalLinkTable | not-accessible | mandatory | A logical link is a group of one or more lower service access points(SAPs) created for the purpose of route balancing. Two types of route balancing algorithms … |
| 1.3.6.1.4.1.495.2.1.6.29.20.1 | Rowx25LogicalLinkEntry | not-accessible | mandatory | Defines a row in the x25LogicalLinkTable. Each row contains the objects which are used to define a member of a logical link. |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.1 | Columnx25LLNumber | read-only | mandatory | Identifies the logical link entry with a unique numerical value. |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.2 | Columnx25LLSapNumber | read-write | mandatory | Determines the lower X.25 layer SAP (service access point) this logical link is associated with. This is the first half of the SAP identification. The second h… |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.3 | Columnx25LLSapCes | read-write | mandatory | Determines the CES (connection endpoint suffix) this logical link is associated with. CES is used by X.25 over the ISDN D channel to support multiple data link… |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.4 | Columnx25LLRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.5 | Columnx25LLRouteAlgorithm | read-write | mandatory | Determines the algorithm used by this logical link to choose the member to route a call to. The value set for the first member of a logical group (lowest SAP/C… |
| 1.3.6.1.4.1.495.2.1.6.29.20.1.6 | Columnx25LLEntryState | read-only | mandatory | Indicates the state of this logical link. Options: offLine (1): This logical link is configured. onLine (2): This logical link is not configured. |
| 1.3.6.1.4.1.495.2.1.6.29.21 | Tablex25SapTable | not-accessible | mandatory | The SAP table contains configuration information for each X.25 layer SAP (service access point). Service Access Points Two types of SAPs exist: - Upper: A SAP … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | Rowx25SapEntry | not-accessible | mandatory | Defines a row in the x25SapTable. Each row contains the objects which define a service access point. |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.1 | Columnx25SapNumber | read-only | mandatory | Identifies this SAP (service access point) with a numerical value. This is the first half of the SAP identifier. The second half is specified by object x25SapC… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.2 | Columnx25SapCes | read-only | mandatory | Identifies the CES (connection endpoint suffix) that is associated with this SAP (service access point). CES is used by X.25 over the ISDN D channel to support… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.3 | Columnx25SapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.4 | Columnx25SapType | read-write | mandatory | Specifies this SAP (service access point) as either 'upper' or 'lower'. Options: lower (1): This is a lower SAP. upper (2): This is an upper SAP. Default Value… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.5 | Columnx25SapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 -16 alphanumeri… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.6 | Columnx25SapCompanionAlias | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the sub-layer SAP this SAP communicates with. This object contains the textual name … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.13 | Columnx25SapInterfaceType | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the SAP interface type. This is used to determine the how cause codes are generated,… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.14 | Columnx25SapLinkType | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the type of service provided by this SAP. Options: x25Link (1): This SAP provides su… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.19 | Columnx25SapRoutePartition | read-write | mandatory | Determines the route table partition used to route incoming calls. Default Value: 0 Related Objects: x25RouteTable Configuration Changed: administrative and op… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.20 | Columnx25SapRouteDirection | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the direction for the routing of incoming calls. Options: both (1): Permits calls to… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.21 | Columnx25SapWildCardRouting | read-write | obsolete | Determines if this SAP applies a routing mask to the called address in incoming calls prior to routing. This implies that certain called address digits may be … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.22 | Columnx25SapWildCardRoutingMask | read-write | obsolete | Determines the route mask, which is applied to the called address in incoming calls prior to routing. The route mask is a bit mask, with each bit directly mapp… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.26 | Columnx25SapActivation | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the type of data link activation used by this SAP. These are internal commands excha… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.27 | Columnx25SapPvcBillingTimer | read-write | mandatory | For future use. This object applies only to lower SAPs (service access points). Determines the period between generation of billing information for all configu… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.31 | Columnx25SapModulo | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the range of sequence numbers available for packet numbering at this SAP (service ac… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.32 | Columnx25SapRxPacketSize | read-write | mandatory | Determines the default receive packet size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFlowCntrlParamNegotiation) is no… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.33 | Columnx25SapTxPacketSize | read-write | mandatory | Determines the default transmit packet size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFlowCntrlParamNegotiation) is n… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.34 | Columnx25SapRxWindowSize | read-write | mandatory | Determines the default receive window size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFlowCntrlParamNegotiation) is no… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.35 | Columnx25SapTxWindowSize | read-write | mandatory | Determines the default transmit window size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFlowCntrlParamNegotiation) is n… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.36 | Columnx25SapRxThruputClass | read-write | mandatory | Determines the default receive throughput class used by this SAP. This value is used only when throughput class negotiation (x25SapSbscrThruputClassNegotiation… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.37 | Columnx25SapTxThruputClass | read-write | mandatory | Determines the default transmit throughput class used by this SAP. This value is used only when throughput class negotiation (x25SapSbscrThruputClassNegotiatio… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.38 | Columnx25SapRxWindowThreshold | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the threshold at which this lower SAP is forced to close its receive window (issue R… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.48 | Columnx25SapLcnAllocation | read-write | mandatory | Determines the order in which logical channel numbers (LCNs) are assigned by this SAP (service access point). Options: ascending (1): LCNs are assigned in asce… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.49 | Columnx25SapLpvcLcn | read-write | mandatory | Determines the lowest LCN (logical channel number) for permanent virtual circuits established at this SAP. Range of Values: 0 - 1023 Default Value: 0 Related O… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.50 | Columnx25SapHpvcLcn | read-write | mandatory | Determines the highest LCN (logical channel number) for permanent virtual circuits established at this SAP. This value must be greater than x25SapLpvcLcn and l… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.51 | Columnx25SapLicLcn | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the lowest LCN (logical channel number) for incoming virtual circuits at this SAP. T… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.52 | Columnx25SapHicLcn | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the highest LCN (logical channel number) for incoming virtual circuits at this SAP. … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.53 | Columnx25SapLtcLcn | read-write | mandatory | Determines the lowest LCN (logical channel number) for two-way virtual circuits at this SAP. This value must be greater than x25SapHicLcn and less than x25SapH… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.54 | Columnx25SapHtcLcn | read-write | mandatory | Determines the lowest LCN (logical channel number) for two-way virtual circuits at this SAP. This value must be greater than x25SapLtcLcn and less than x25SapL… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.55 | Columnx25SapLocLcn | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the lowest LCN (logical channel number) for two-way virtual circuits at this SAP. Th… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.56 | Columnx25SapHocLcn | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the highest LCN (logical channel number) for outgoing virtual circuits at this SAP. … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.61 | Columnx25SapConnectTimer | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for the sub-layer (typically the Data Link laye… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.62 | Columnx25SapDisconnectTimer | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for the sub-layer (typically the Data Link laye… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.63 | Columnx25SapRestartTimer | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for a Restart Confirmation packet in response t… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.64 | Columnx25SapCallTimer | read-write | mandatory | Determines the maximum amount of time this SAP waits for a Call Connected packet in response to a previously sent Call Request packet. Range of Values: 1 - 300… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.65 | Columnx25SapResetTimer | read-write | mandatory | Determines the maximum amount of time this SAP waits for a Reset Confirmation packet in response to a previously sent Reset Request packet. Range of Values: 1 … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.66 | Columnx25SapClearTimer | read-write | mandatory | Determines the maximum amount of time this SAP waits for a Clear Confirmation packet in response to a previously sent Clear Request packet. Range of Values: 1 … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.67 | Columnx25SapInactivityTimer | read-write | mandatory | Determines the maximum amount of time this SAP (service access point) can hold outbound queued data for a virtual circuit. If this timer expires before the que… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.68 | Columnx25SapFlowControlTimer | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the amount of time between checks of available system resources when the virtual cir… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.69 | Columnx25SapWindowStatusTimer | read-write | mandatory | Determines the maximum amount of time this SAP waits for an outgoing packet to piggy-back an acknowledgment onto. If this timer expires, it forces an acknowled… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.80 | Columnx25SapSbscrCalledAddressInsertion | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP inserts the called address in Call Accept packets, and if the called add… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.81 | Columnx25SapSbscrCallingAddressInsertion | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP inserts the calling address in Call Accept packets, and if the calling a… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.82 | Columnx25SapSbscrPktRetransmission | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Packet Retransmission facility. Options: false (1): No… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.83 | Columnx25SapSbscrInAccessBarred | read-write | mandatory | Determines if this SAP subscribes to the Incoming Calls Barred facility. Options: false (1): Not subscribed. true (2): Subscribed: If this is a lower SAP confi… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.84 | Columnx25SapSbscrOutAccessBarred | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Outgoing Calls Barred facility. Options: false (1): No… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.85 | Columnx25SapSbscrFlowCntrlParamNegotiation | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Flow Control Parameter Negotiation facility. This allo… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.86 | Columnx25SapSbscrThruputClassNegotiation | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Throughput Class Negotiation facility. This allows neg… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.87 | Columnx25SapSbscrFastSelect | read-write | mandatory | Determines if this SAP subscribes to the Fast Select facility. This applies to outgoing calls only. Options: false (1): Not subscribed. This SAP will refuse in… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.88 | Columnx25SapSbscrFastSelectAcceptance | read-write | mandatory | Determines if this SAP subscribes to the Fast Select Acceptance facility. This applies to incoming calls only. Options: false (1): Not subscribed. This SAP wil… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.89 | Columnx25SapSbscrReverseChargingAcceptance | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Reverse Charging Acceptance facility. This facility ap… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.90 | Columnx25SapSbscrLocalChargingPrevention | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Local Charging Prevention facility. This facility appl… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.91 | Columnx25SapSbscrChargingInformation | read-write | mandatory | Determines if this SAP subscribes to the Charging Information facility. This facility applies to incoming calls only. Options: false (1): Not subscribed. This … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.92 | Columnx25SapSbscrCallRedirection | read-write | mandatory | Determines if this SAP subscribes to the Call Redirection facility. This facility applies to outgoing calls only. Options: false (1): Not subscribed. This SAP … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.93 | Columnx25SapSbscrPermissionToRedirect | read-write | mandatory | Determines if this SAP subscribes to the Permission to Redirect facility. This facility applies to incoming calls only. Options: false (1): Not subscribed. Thi… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.94 | Columnx25SapRedirectionAddress | read-write | mandatory | Determines the address this SAP redirects calls to. To make use of this address this SAP must subscribe to the Call Redirection facility. Range of Values: DTE … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.95 | Columnx25SapSbscrNetworkUserId | read-write | mandatory | Determines if this SAP subscribes to the Network User Indentification (NUI) facility. This facility applies to incoming calls only. Options: false (1): Not sub… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.96 | Columnx25SapSbscrCallingAddressValidation | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Calling Address Validation facility. This facility app… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.97 | Columnx25SapSourceAddress | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the calling address used by this SAP when it subscribes to the Calling Address Valid… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.98 | Columnx25SapSbscrRouteUsingCUDF | read-write | mandatory | Determines if this SAP subscribes to the Call User Data facility for routing. This facility applies to incoming calls only. Each SAP can only subscribe to one … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.99 | Columnx25SapSbscrRouteUsingSubAddress | read-write | mandatory | Determines if this SAP uses the subaddress field for routing. This facility applies to incoming calls only. Each SAP can only subscribe to one of the following… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.100 | Columnx25SapSbscrRouteUsingCAE | read-write | mandatory | Determines if this SAP uses the called address extension facility for routing. This facility applies to incoming calls only. Each SAP can only subscribe to one… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.101 | Columnx25SapRouteAddressLength | read-write | mandatory | Determines the number of digits this SAP uses as the destination address when routing incoming calls. This applies when one of the following routing decisions … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.102 | Columnx25SapSbscrTransitDelay | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Calling Address Validation facility. This facility app… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.103 | Columnx25SapTransitDelay | read-write | mandatory | This object applies only to lower SAPs (service access points). Defines the transit delay appended by this SAP if it subscribes to the transit delay facility. … |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.104 | Columnx25SapSbscrCugIncomingAccess | read-write | mandatory | Determines if this SAP subscribes to the Closed User Group with Incoming Access facility. This facility applies to outgoing calls only. Options: false (1): Not… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.105 | Columnx25SapSbscrCugOutgoingAccess | read-write | mandatory | Determines if this SAP subscribes to the Closed User Group with Outgoing Access facility. This facility applies to incoming calls only. Options: false (1): Not… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.106 | Columnx25SapPreferentialCugIndex | read-write | mandatory | Determines the preferential CUG index for this SAP. This is required when this SAP belongs to more than one CUG. Range of Values: 0 - 99 ('0' indicates no pref… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.120 | Columnx25SapControl | write-only | mandatory | Permits control of a specific SAP (service access point). Options: clearStats (1): Clear all statistics stored by x25Sap statistics objects. enableSap (2):. Lo… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.125 | Columnx25SapLinkState | read-only | mandatory | Determines the current state of this SAP (service access point). Options: connecting (1): In the process of establishing a call. dataTransfer (2): In data tran… |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.126 | Columnx25SapFlowControlState | read-only | mandatory | Indicates the status of flow control on this SAP (service access point). Flow control is initiated by this SAP when overall system resources drop lower than th… |
| 1.3.6.1.4.1.495.2.1.6.29.22 | Tablex25SapStatsTable | not-accessible | mandatory | A table containing statistical information about each service access point. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1 | Rowx25SapStatsEntry | not-accessible | mandatory | The statistical information for a specific service access point. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.1 | Columnx25SapStatsSapNumber | read-only | mandatory | Determines the lower X.25 layer SAP (service access point) these statistics are associated with. This is the first half of the SAP identification. The second h… |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.2 | Columnx25SapStatsSapCes | read-only | mandatory | Determines the lower X.25 layer SAP (service access point) these statistics are associated with. This is the second half of the SAP identification. The first h… |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.3 | Columnx25SapStatsTxDataPkts | read-only | mandatory | Indicates the number of data packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.4 | Columnx25SapStatsRxDataPkts | read-only | mandatory | Indicates the number of data packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.5 | Columnx25SapStatsTxDataChars | read-only | mandatory | Indicates the number of data characters transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.6 | Columnx25SapStatsRxDataChars | read-only | mandatory | Indicates the number of data characters received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.7 | Columnx25SapStatsTxQDataPkts | read-only | mandatory | Indicates the number of Q-bit data packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.8 | Columnx25SapStatsRxQDataPkts | read-only | mandatory | Indicates the number of Q-bit data packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.9 | Columnx25SapStatsTxQDataChars | read-only | mandatory | Indicates the number of Q-bit data character transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.10 | Columnx25SapStatsRxQDataChars | read-only | mandatory | Indicates the number of Q-bit data characters received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.11 | Columnx25SapStatsTxCallPkts | read-only | mandatory | Indicates the number of Call Request packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.12 | Columnx25SapStatsRxCallPkts | read-only | mandatory | Indicates the number of Call Request packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.13 | Columnx25SapStatsTxClrPkts | read-only | mandatory | Indicates the number of Clear packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.14 | Columnx25SapStatsRxClrPkts | read-only | mandatory | Indicates the number of Clear packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.15 | Columnx25SapStatsTxRRPkts | read-only | mandatory | Indicates the number of Receiver Ready (RR) packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.16 | Columnx25SapStatsRxRRPkts | read-only | mandatory | Indicates the number of Receiver Ready (RR) packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.17 | Columnx25SapStatsTxRNRPkts | read-only | mandatory | Indicates the number of Receiver Not Ready (RNR) packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.18 | Columnx25SapStatsRxRNRPkts | read-only | mandatory | Indicates the number of Receiver Not Ready (RNR) packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.19 | Columnx25SapStatsTxResPkts | read-only | mandatory | Indicates the number of Reset packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.20 | Columnx25SapStatsRxResPkts | read-only | mandatory | Indicates the number of Reset packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.21 | Columnx25SapStatsTxRstPkts | read-only | mandatory | This object applies only to lower SAPs (service access points). Indicates the number of Restart packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.22 | Columnx25SapStatsRxRstPkts | read-only | mandatory | This object applies only to lower SAPs (service access points). Indicates the number of Restart packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.23 | Columnx25SapStatsTxIntPkts | read-only | mandatory | Indicates the number of Interrupt packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.24 | Columnx25SapStatsRxIntPkts | read-only | mandatory | Indicates the number of Interrupt packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.25 | Columnx25SapStatsTxDiagPkts | read-only | mandatory | This object applies only to lower SAPs (service access points). Indicates the number of Diagnostic packets transmitted by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.26 | Columnx25SapStatsRxDiagPkts | read-only | mandatory | This object applies only to lower SAPs (service access points). Indicates the number of Diagnostic packets received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.27 | Columnx25SapStatsRxInvPkts | read-only | mandatory | Indicates the number of packets that were received by this SAP, but were discarded because they were invalid for the state the X.25 interface was in at the tim… |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.28 | Columnx25SapStatsCons | read-only | mandatory | For future use. Indicates the number of connections established through this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.29 | Columnx25SapStatsDiscs | read-only | mandatory | For future use. Indicates the number of disconnects through this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.30 | Columnx25SapStatsLastCauseCode | read-only | mandatory | Indicates the last cause code received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.31 | Columnx25SapStatsLastDiagCode | read-only | mandatory | Indicates the last diagnostics code received by this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.22.1.32 | Columnx25SapStatsActiveLcns | read-only | mandatory | For future use. Indicates the active number of open logical channels at this SAP. |
| 1.3.6.1.4.1.495.2.1.6.29.23 | Tablex25CugTable | not-accessible | mandatory | This tables contains CUG (closed user group) definitions for the X.25 layer. Any service access point (upper or lower) can be part of one or more CUGs. Each ro… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1 | Rowx25CugEntry | not-accessible | mandatory | Defines a row in the x25CugTable. Each row contains the objects which define a member of a closed user group. |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.1 | Columnx25CugSapNumber | read-only | mandatory | Identifies the SAP (service access point) this entry is associated with. This is the first half of the SAP identification. The second half is specified by obje… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.2 | Columnx25CugSapCes | read-only | mandatory | Identifies the CES (connection endpoint suffix) this entry is associated with. This is the second half of the SAP identification. The first half is specified b… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.3 | Columnx25CugIndex | read-only | mandatory | Determines the CUG index assigned to this member for use when routing outgoing CUG calls, or for validating when receiving incoming CUG calls. A value of '0' i… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.4 | Columnx25CugRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.5 | Columnx25CugInterlockCode | read-write | mandatory | Determines the CUG (closed user group) that member belongs to. This number also represents the interlock code used by the layer when translating index codes fr… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.6 | Columnx25CugSbscrInCallsBarred | read-write | mandatory | Determines if this SAP subscribes to the Incoming Calls Barred with a Closed User Group facility. Options: false (1): Not subscribed. true (2): Subscribed: Per… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.7 | Columnx25CugSbscrOutCallsBarred | read-write | mandatory | Determines if this SAP subscribes to the Outgoing Calls Barred with a Closed User Group facility. Options: false (1): Not subscribed. true (2): Subscribed: Per… |
| 1.3.6.1.4.1.495.2.1.6.29.23.1.8 | Columnx25CugEntryState | read-only | mandatory | Determines the state of the CUG (closed user group) entry. Options: offLine (1): Indicates this CUG entry has not been configured. onLine (2): Indicates that t… |
| 1.3.6.1.4.1.495.2.1.6.29.24 | Tablex25RouteTable | not-accessible | mandatory | The SVC Route table contains the definitions used to route all switched virtual circuits. A route entry consists of the called address that activates the route… |
| 1.3.6.1.4.1.495.2.1.6.29.24.1 | Rowx25RouteEntry | not-accessible | mandatory | Defines a row in the x25RouteTable. Each row contains the objects which define a route for switched virtual circuits. |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.1 | Columnx25RoutePartition | read-only | mandatory | Identifies the partition within the route table that this route belongs to. Not significant for routing. |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.2 | Columnx25RouteId | read-only | mandatory | The index of the route within the partition. Not significant for routing. |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.3 | Columnx25RouteRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.4 | Columnx25RouteType | read-write | mandatory | Determines the type of route this entry defines. Options: specUpperSap (1): Route to a specific upper SAP. specLowerSap (2): Rout to a specific lower SAP. logi… |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.5 | Columnx25RouteAddress | read-write | mandatory | Determines the called DTE address that triggers routing. If an incoming call is received at any upper or lower SAP with this address, it is routed to the desti… |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.6 | Columnx25RouteSLHNumber | read-write | mandatory | Determines the destination SAP, logical link, or Hunt Group to route to. The destination depends on the setting of x25RouteType. - If x25RouteType = 1 then thi… |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.7 | Columnx25RouteSapCes | read-write | mandatory | Determines the CES number to route to. The value you set depends on the setting of x25RouteType. - If x25RouteType = 1 then this object must be set to 0. - If … |
| 1.3.6.1.4.1.495.2.1.6.29.24.1.8 | Columnx25RouteEntryState | read-only | mandatory | Determines the state of the route entry. Options: offLine (1): Indicates this route entry has not been configured. onLine (2): Indicates that this route entry … |
| 1.3.6.1.4.1.495.2.1.6.29.25 | Tablex25HuntGroupTable | not-accessible | mandatory | This table contains Hunt Group definitions for the X.25 layer. A hunt group is a grouping of upper and lower SAPs (service access points) for the purpose of ro… |
| 1.3.6.1.4.1.495.2.1.6.29.25.1 | Rowx25HuntGroupEntry | not-accessible | mandatory | Defines a row in the x25HuntGroupTable. Each row contains the objects which define the parameters for one member of a hunt group. |
| 1.3.6.1.4.1.495.2.1.6.29.25.1.1 | Columnx25HGId | read-only | mandatory | Identifies the hunt group that the member belongs to. Range of Values: 1 - 99 Default Value: none Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.29.25.1.2 | Columnx25HGMemberIndex | read-only | mandatory | Identifies the order of the member within the hunt group. Range of Values: 1 - 99 Default Value: none Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.29.25.1.3 | Columnx25HGSapNumber | read-write | mandatory | Identifies the SAP (service access point) this entry is associated with. This is the first half of the SAP identification. The second half is specified by obje… |
| 1.3.6.1.4.1.495.2.1.6.29.25.1.4 | Columnx25HGSapCes | read-write | mandatory | Identifies the CES (connection endpoint suffix) this entry is associated with. This is the second half of the SAP identification. The first half is specified b… |
| 1.3.6.1.4.1.495.2.1.6.29.25.1.5 | Columnx25HGRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.26 | Tablex25HuntGroupOperTable | not-accessible | mandatory | This table contains the current active Hunt Group (closed user group) definitions for the X.25 layer. Use the x25HuntGroupTable to define Hunt Group members. W… |
| 1.3.6.1.4.1.495.2.1.6.29.26.1 | Rowx25HuntGroupOperEntry | not-accessible | mandatory | Identifies one operational member of a hunt group. |
| 1.3.6.1.4.1.495.2.1.6.29.26.1.1 | Columnx25HGOperId | read-only | mandatory | Identifies the hunt group that this operational member belongs to. |
| 1.3.6.1.4.1.495.2.1.6.29.26.1.2 | Columnx25HGOperMemberIndex | read-only | mandatory | Identifies the order of this operational member within the hunt group. |
| 1.3.6.1.4.1.495.2.1.6.29.26.1.3 | Columnx25HGOperSapNumber | read-only | mandatory | Identifies the SAP (service access point) this entry is associated with. This is the first half of the SAP identification. The second half is specified by obje… |
| 1.3.6.1.4.1.495.2.1.6.29.26.1.4 | Columnx25HGOperSapCes | read-only | mandatory | Identifies the CES (connection endpoint suffix) this entry is associated with. This is the second half of the SAP identification. The first half is specified b… |
| 1.3.6.1.4.1.495.2.1.6.29.27 | Tablex25PvcTable | not-accessible | mandatory | This table contains definitions used to route X.25 PVCs (permanent virtual circuits). A PVC is always routed between two lower SAPs, or between a lower SAP and… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1 | Rowx25PvcEntry | not-accessible | mandatory | Defines a row in the x25PvcTable. Each row contains the objects which define a route for a permanent virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.1 | Columnx25PvcId | read-only | mandatory | The index of the PVC within the table. No significance for routing. |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.2 | Columnx25PvcRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.3 | Columnx25PvcSrcSap | read-write | mandatory | Determines the source SAP (service access point) for the PVC, which must be a lower SAP. This is the first half of the SAP identification. The second half is s… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.4 | Columnx25PvcSrcCes | read-write | mandatory | Identifies the source SAP for the PVC, which must be a lower SAP. This is the second half of the SAP identification. The first half is specified by object x25P… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.5 | Columnx25PvcDstSap | read-write | mandatory | Determines the destination SAP (service access point) for the PVC, which can be an upper or lower SAP. This is the first half of the SAP identification. The se… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.6 | Columnx25PvcDstCes | read-write | mandatory | Identifies the destination SAP for the PVC, which can be an upper or lower SAP. This is the second half of the SAP identification. The first half is specified … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.7 | Columnx25PvcSrcLcn | read-write | mandatory | Determines the LCN (logical channel number) used by this PVC at the source SAP (service access point). The value assigned must be within the range of PVC LCNs … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.8 | Columnx25PvcDstLcn | read-write | mandatory | Determines the LCN (logical channel number) used by this PVC at the source SAP (service access point). The value assigned must be within the range of PVC LCNs … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.9 | Columnx25PvcSrcRxPacketSize | read-write | mandatory | Determines the receive packet size used by the associated source SAP (service access point). This overrides the default settings for the SAP. Options: bytes16 … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.10 | Columnx25PvcSrcTxPacketSize | read-write | mandatory | Determines the transmit packet size used by the associated source SAP (service access point). This overrides the default settings for the SAP. Options: bytes16… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.11 | Columnx25PvcDstRxPacketSize | read-write | mandatory | Determines the receive packet size used by the associated destination SAP (service access point). This overrides the default settings for the SAP. Options: byt… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.12 | Columnx25PvcDstTxPacketSize | read-write | mandatory | Determines the receive packet size used by the associated destination SAP (service access point). This overrides the default settings for the SAP. Options: byt… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.13 | Columnx25PvcRxWindow | read-write | mandatory | Determines the receive window size. At the source side, it defines the window for packets received from the source interface. At the destination side, it defin… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.14 | Columnx25PvcTxWindow | read-write | mandatory | Determines the transmit window size. At the source side, it defines the window for packets transmitted to the source interface. At the destination side, it def… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.15 | Columnx25PvcRxThruputClass | read-write | mandatory | Determines the receive throughput class for the external link. At the source side, it defines the throughput class used for packets received from the source in… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.16 | Columnx25PvcTxThruputClass | read-write | mandatory | The transmit throughput class across the line. At the source side, it defines the throughput class used for packets transmitted to the source interface. At the… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.17 | Columnx25PvcBilling | read-write | mandatory | Determines if billing information is collected for this PVC. Billing information can only be collected for lower SAPs (service access points). If both sides of… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.18 | Columnx25PvcSrcAddress | read-write | mandatory | Determines the X.121 address that is associated with the source side for billing purposes only. Range of Values: DTE address enclosed in quotes (up to 15 numer… |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.19 | Columnx25PvcDstAddress | read-write | mandatory | Determines the X.121 address that is associated with the destination side for billing purposes only. Range of Values: DTE address enclosed in quotes (up to 15 … |
| 1.3.6.1.4.1.495.2.1.6.29.27.1.20 | Columnx25PvcEntryState | read-only | mandatory | Determines the state of this PVC entry. Options: offLine (1): Indicates this PVC entry has not been configured. onLine (2): Indicates that this PVC entry has b… |
| 1.3.6.1.4.1.495.2.1.6.29.28 | Tablex25LcnStatusTable | not-accessible | mandatory | A table containing current information about established virtual circuits (permanent or switched) within the layer. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1 | Rowx25LcnStatusEntry | not-accessible | mandatory | The current information for a specific and currently established virtual circuit (permanent or switched) within the layer. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.1 | Columnx25LcnSrcSap | read-only | mandatory | Identifies the source side SAP (service access point) this entry is associated with. This is the first half of the SAP identification. The second half is speci… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.2 | Columnx25LcnSrcCes | read-only | mandatory | Identifies the source side CES (connection endpoint suffix) this entry is associated with. This is the second half of the SAP identification. The first half is… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.3 | Columnx25LcnSrcLcn | read-only | mandatory | Identifies the source side logical channel number this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.4 | Columnx25LcnDstSap | read-only | mandatory | Identifies the destination side SAP (service access point) this entry is associated with. This is the first half of the SAP identification. The second half is … |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.5 | Columnx25LcnDstCes | read-only | mandatory | Identifies the destination side CES (connection endpoint suffix) this entry is associated with. This is the second half of the SAP identification. The first ha… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.6 | Columnx25LcnDstLcn | read-only | mandatory | Indicates the destination side logical channel number this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.20 | Columnx25LcnDBitCall | read-only | mandatory | Indicates if this virtual circuit was established using a D-bit call. Options: false (1): Not established using a D- bit call. true (2): Established using a D-… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.21 | Columnx25LcnPvc | read-only | mandatory | Indicates the virtual circuit type. Options: false (1): SVC (switched virtual circuit). true (2): PVC (permanent virtual circuit). |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.22 | Columnx25LcnModulo | read-only | mandatory | Indicates the modulus in use on this side of the virtual circuit. Modulus determines the range of sequence numbers available for packet numbering. Options: mod… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.23 | Columnx25LcnState | read-only | mandatory | Indicates the current state at this side of the virtual circuit. Options: stateReady (1): SVC: Does not apply. PVC: The PVC is configured. It remains in this s… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.30 | Columnx25LcnTxRnr | read-only | mandatory | Indicates if this side of the virtual circuit has initiated flow control by sending an RNR. Options: false (1): An RNR was not sent. true (2): An RNR was sent. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.31 | Columnx25LcnRxRnr | read-only | mandatory | Indicates if this side of the virtual circuit has received an RNR. Options: false (1): An RNR was not received. true (2): An RNR was received. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.32 | Columnx25LcnTxWindowSize | read-only | mandatory | Indicates the transmit window size in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.33 | Columnx25LcnRxWindowSize | read-only | mandatory | Indicates the receive window size in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.34 | Columnx25LcnTxPacketSize | read-only | mandatory | Indicates the transmit packet size (in bytes) in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.35 | Columnx25LcnRxPacketSize | read-only | mandatory | Indicates the receive packet size (in bytes) in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.36 | Columnx25LcnTxThruputClass | read-only | mandatory | Indicates the transmit throughput class (in bps) in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.37 | Columnx25LcnRxThruputClass | read-only | mandatory | Indicates the receive throughput class (in bps) in use at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.50 | Columnx25LcnSrcAddress | read-only | mandatory | Indicates the calling address specified when this virtual circuit was established. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.51 | Columnx25LcnDstAddress | read-only | mandatory | Indicates the called address specified when this virtual circuit was established. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.60 | Columnx25LcnTxQLength | read-only | mandatory | Indicates the current number of outbound queued frames at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.61 | Columnx25LcnNextTransmitPs | read-only | mandatory | Indicates the next P(s) to be used at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.62 | Columnx25LcnNextExpectedPs | read-only | mandatory | Indicates the next expected P(s) at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.63 | Columnx25LcnLastTransmittedPr | read-only | mandatory | Indicates the last transmitted P(r) at this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.64 | Columnx25LcnLastReceivedPr | read-only | mandatory | Indicates the last received P(r) on this side of the virtual circuit. |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.80 | Columnx25LcnFCTimerRunning | read-only | mandatory | Indicates if the flow control timer (object x25SapFlowControlTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapFlowCon… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.81 | Columnx25LcnT24TimerRunning | read-only | mandatory | Indicates if the window status timer (object x25SapWindowStatusTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapWindo… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.82 | Columnx25LcnInacTimerRunning | read-only | mandatory | Indicates if the inactivity timer (object x25SapInactivityTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapInactivity… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.83 | Columnx25LcnCalTimerRunning | read-only | mandatory | Indicates if the call request timer (object x25SapCallTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapCallTimer is n… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.84 | Columnx25LcnClrTimerRunning | read-only | mandatory | Indicates if the clear timer (object x25SapClearTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapClearTimer is not ru… |
| 1.3.6.1.4.1.495.2.1.6.29.28.1.85 | Columnx25LcnResTimerRunning | read-only | mandatory | Indicates if the reset timer (object x25SapResetTimer) is currently running on this side of the virtual circuit. Options: false (1): x25SapResetTimer is not ru… |
| 1.3.6.1.4.1.495.2.1.6.29.30 | Scalarx25MibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ces | INTEGER (0..63) | ||
| CugIC | INTEGER (1..65535) | ||
| CugIndex | INTEGER (1..99) | ||
| HGIndex | INTEGER (1..99) | ||
| Lcn | INTEGER (0..1024) | ||
| PacketSize | INTEGER { bytes16 (4), bytes32 (5), bytes64 (6), bytes128 (7), bytes256 (8), bytes512 (9), bytes1024 (10), bytes2048 (11), bytes4096 (12) } | ||
| PvcIndex | INTEGER (1..200) | ||
| RouteIndex | INTEGER (1..999) | ||
| RoutePartition | INTEGER (0..255) | ||
| SapType | INTEGER { lower (1), upper (2) } |