DAVID-MIB
126 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter DisplayString enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.66 | Nodedavid | |||
| 1.3.6.1.4.1.66.1 | Nodeproducts | |||
| 1.3.6.1.4.1.66.1.3 | NodedavidExpressNet | |||
| 1.3.6.1.4.1.66.1.3.1 | NodeexNetChassis | |||
| 1.3.6.1.4.1.66.1.3.1.1 | ScalarexNetChassisType | read-only | mandatory | The chassis type (option). |
| 1.3.6.1.4.1.66.1.3.1.2 | ScalarexNetChassisBkplType | read-only | mandatory | The chassis backplane type (option). |
| 1.3.6.1.4.1.66.1.3.1.3 | ScalarexNetChassisBkplRev | read-only | mandatory | The chassis backplane revision. |
| 1.3.6.1.4.1.66.1.3.1.4 | ScalarexNetChassisPsType | read-only | mandatory | The chassis power supply type. This refers to the chassis transformer. Each module (including the Supervisor Module) has its own switching power supply. |
| 1.3.6.1.4.1.66.1.3.1.5 | ScalarexNetChassisPsStatus | read-only | mandatory | The chassis power supply status. This refers t othe chassis transformer. Each module (including the Supervisor Module) has its own switching power supply. The … |
| 1.3.6.1.4.1.66.1.3.1.7 | TableexNetSlotConfigTable | not-accessible | mandatory | The chassis slot configuration table. |
| 1.3.6.1.4.1.66.1.3.1.7.1 | RowexNetSlotConfigEntry | not-accessible | mandatory | Descriptions of the modules (or boards) in each slot. |
| 1.3.6.1.4.1.66.1.3.1.7.1.1 | ColumnexNetSlotIndex | read-only | mandatory | The DAVID ExpressNet chassis slot number. Valid entries are 1 to exNetChassisCapacity. On the physical Concentrator boxes, the Supervisor Modules are not numbe… |
| 1.3.6.1.4.1.66.1.3.1.7.1.2 | ColumnexNetBoardId | read-only | mandatory | The unique hardware ID for the module. |
| 1.3.6.1.4.1.66.1.3.1.7.1.3 | ColumnexNetBoardType | read-only | mandatory | The type of the module. |
| 1.3.6.1.4.1.66.1.3.1.7.1.4 | ColumnexNetBoardDescr | read-only | mandatory | Textual description of the module type. |
| 1.3.6.1.4.1.66.1.3.1.7.1.40 | ColumnexNetBoardNumOfPorts | read-only | mandatory | The number of ports supported by the plug-in module. For a 10BASE-T Module the value is 12; for an FOIRL Module, 6; for a Supervisor Module, 1. |
| 1.3.6.1.4.1.66.1.3.1.8 | ScalarexNetChassisCapacity | read-only | mandatory | The number of slots in the chassis for plug-in modules. This number will be either five or twelve for a Concentrator and two for a Hub. |
| 1.3.6.1.4.1.66.1.3.2 | NodeexNetEthernet | |||
| 1.3.6.1.4.1.66.1.3.2.1 | NodeexNetConcentrator | |||
| 1.3.6.1.4.1.66.1.3.2.1.1 | ScalarexNetConcRetimingStatus | read-only | mandatory | Indicates whether this repeater has retiming turned on. All DAVID ExpressNet repeaters implement retiming, so the value on(2) is always returned for this varia… |
| 1.3.6.1.4.1.66.1.3.2.1.2 | ScalarexNetConcFrmsRxOk | read-only | mandatory | A count of frames that are successfully received by the Concentrator. This counter does not include frames received with frame-too-long, runt, FCS, or alignmen… |
| 1.3.6.1.4.1.66.1.3.2.1.3 | ScalarexNetConcOctetsRxOk | read-only | mandatory | A count of data and padding octets in frames that are successfully received by the concentrator. This counter does not include frames received with frame-too-l… |
| 1.3.6.1.4.1.66.1.3.2.1.4 | ScalarexNetConcMcastFrmsRxOk | read-only | mandatory | A count of frames that are successfully received by the concentrator and are directed to an active non-broadcast group address. This counter does not include f… |
| 1.3.6.1.4.1.66.1.3.2.1.5 | ScalarexNetConcBcastFrmsRxOk | read-only | mandatory | A count of frames that are successfully received by the concentrator and are directed to the broadcast group address. This counter does not include frames rece… |
| 1.3.6.1.4.1.66.1.3.2.1.6 | ScalarexNetConcColls | read-only | mandatory | Total collisions involving an incoming packet on any port (link or Network Interface port) in the Concentrator. This counter increments once for each collision… |
| 1.3.6.1.4.1.66.1.3.2.1.7 | ScalarexNetConcTooLongErrors | read-only | mandatory | A count of frames that are received by the Concentrator and exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.66.1.3.2.1.8 | ScalarexNetConcRuntErrors | read-only | mandatory | Number of frames received by the Concentrator that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes … |
| 1.3.6.1.4.1.66.1.3.2.1.9 | ScalarexNetConcFragErrors | read-only | mandatory | Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on the Concentrator. Fragments indicate an external noise … |
| 1.3.6.1.4.1.66.1.3.2.1.10 | ScalarexNetConcAlignErrors | read-only | mandatory | Number of frames received on the Concentrator that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the fram… |
| 1.3.6.1.4.1.66.1.3.2.1.11 | ScalarexNetConcFcsErrors | read-only | mandatory | A count of frames received by the Concentrator that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. FCS errors… |
| 1.3.6.1.4.1.66.1.3.2.1.12 | ScalarexNetConcLateCollErrors | read-only | mandatory | A total Concentrator count of the late collisions. The late collision counter for a port is incremented whenever a collision is detected on the port later than… |
| 1.3.6.1.4.1.66.1.3.2.1.40 | ScalarexNetConcName | read-write | mandatory | A descriptive string that can be used by a network administrator to name the Concentrator. |
| 1.3.6.1.4.1.66.1.3.2.1.41 | ScalarexNetConcJabbers | read-only | mandatory | A count of the number of times that the jabber function had to be invoked because a frame received from one of this Concentrator's ports exceeded 5 msec in dur… |
| 1.3.6.1.4.1.66.1.3.2.1.42 | ScalarexNetConcSfdErrors | read-only | mandatory | Amount of activity from this Concentrator's ports where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity prob… |
| 1.3.6.1.4.1.66.1.3.2.1.43 | ScalarexNetConcAutoPartitions | read-only | mandatory | Indicates how often ports on this Concentrator have been automatically partitioned by the Concentrator repeater function. |
| 1.3.6.1.4.1.66.1.3.2.1.44 | ScalarexNetConcOosBitRate | read-only | mandatory | Number of times that frames have been received on the Concentrator with the transmission frequency (data rate) badly out of spec. This counter is incremented w… |
| 1.3.6.1.4.1.66.1.3.2.1.45 | ScalarexNetConcLinkErrors | read-only | mandatory | This composite counter includes jabbers, auto-partitions, and start-frame delimiter errors. |
| 1.3.6.1.4.1.66.1.3.2.1.46 | ScalarexNetConcFrameErrors | read-only | mandatory | This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors. |
| 1.3.6.1.4.1.66.1.3.2.1.47 | ScalarexNetConcNetUtilization | read-only | mandatory | A series of ten bytes, each indicating the percentage of bandwidth utilization for a 100-millisecond interval. Together they give the bandwidth utilization for… |
| 1.3.6.1.4.1.66.1.3.2.1.48 | ScalarexNetConcResetTimeStamp | read-only | mandatory | The value of sysUpTime at the point that the Concentrator repeater state machine was last reset. |
| 1.3.6.1.4.1.66.1.3.2.1.49 | ScalarexNetConcReset | read-write | mandatory | The reset state of the Concentrator's repeater state machine. Writing a 2 will reset the Concentrator's control logic, without changing the current configurati… |
| 1.3.6.1.4.1.66.1.3.2.2 | NodeexNetModule | |||
| 1.3.6.1.4.1.66.1.3.2.2.1 | TableexNetModuleTable | not-accessible | mandatory | A list of module entries. The number of entries is given by the number of modules that are obtained by the Concentrator Slot Configuration Table. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1 | RowexNetModuleEntry | not-accessible | mandatory | A module entry containing objects at the module level for a particular module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.1 | ColumnexNetModuleIndex | read-only | mandatory | A unique value for each module. Its value ranges between 1 and exNetChassisCapacity. The value for each module must remain constant at least from one reinitial… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.2 | ColumnexNetModuleType | read-only | mandatory | The type of the module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.3 | ColumnexNetModuleHwVer | read-only | mandatory | The hardware configuration of the module or hub. For model 6311, 6312, and 6313 board types, the type of Network Interface provided with the board is indicated… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.4 | ColumnexNetModuleStatus | read-only | mandatory | The operational status of the module. If the status is selfTestFail(3), the exNetModuleSelfTestResult will give more detailed information about the module's co… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.5 | ColumnexNetModuleReset | read-write | mandatory | The reset state of the module. Writing a 2 will reset the module's control logic, without changing the current configuration. Writing a 3 will reset the module… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.6 | ColumnexNetModulePartStatus | read-write | mandatory | Tells whether the module is partitioned or enabled. Writing a 2 will partition the module and 1 will enable the module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.7 | ColumnexNetModuleNmCntlStatus | read-only | mandatory | Tells whether the module is under network management control. DAVID ExpressNet Concentrators always return nmControl(2), since all modules are always under net… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.8 | ColumnexNetModulePsStatus | read-only | mandatory | The status of the module's power supply. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.9 | ColumnexNetModuleFrmsRxOk | read-only | mandatory | A count of frames that are successfully received by the module. This counter does not include frames received with frame-too-long, runt, FCS, or alignment erro… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.10 | ColumnexNetModuleOctetsRxOk | read-only | mandatory | A count of data and padding octets in frames that are successfully received by the module. This counter does not include frames received with frame-too-long, r… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.13 | ColumnexNetModuleColls | read-only | mandatory | Total collisions involving an incoming packet on any link or the backplane connector in the module. This counter increments once for each collision involving a… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.14 | ColumnexNetModuleTooLongErrors | read-only | mandatory | A count of frames that are received by the module and exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.15 | ColumnexNetModuleRuntErrors | read-only | mandatory | Number of frames received by the module that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes (512 b… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.16 | ColumnexNetModuleAlignErrors | read-only | mandatory | Number of frames received by the module that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the frame chec… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.17 | ColumnexNetModuleFcsErrors | read-only | mandatory | A count of frames received by the module that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. FCS errors are s… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.18 | ColumnexNetModuleLateCollErrors | read-only | mandatory | A module count of the late collisions on all of the module's ports. The late collision counter for a port is incremented whenever a collision is detected on th… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.40 | ColumnexNetModuleName | read-write | mandatory | A descriptive string that can be used by a network administrator to name the module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.41 | ColumnexNetModuleJabbers | read-only | mandatory | A count of the number of times that the jabber function had to be invoked because a frame received from one of this module's ports exceeded 5 msec in duration. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.42 | ColumnexNetModuleSfdErrors | read-only | mandatory | Amount of activity from this module's ports where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity problem.) |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.43 | ColumnexNetModuleAutoPartitions | read-only | mandatory | Indicates how often ports on this module have been automatically partitioned by the module repeater function. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.44 | ColumnexNetModuleOosBitRate | read-only | mandatory | Number of times that frames have been received from ports on this module with the transmission frequency (data rate) badly out of spec. This counter is increme… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.45 | ColumnexNetModuleLinkErrors | read-only | mandatory | This composite counter includes jabbers, auto-partitions, and start-frame delimiter errors. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.46 | ColumnexNetModuleFrameErrors | read-only | mandatory | This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.47 | ColumnexNetModuleFragErrors | read-only | mandatory | Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on the module. Fragments indicate an external noise hit (a… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.48 | ColumnexNetModulePortConfig | read-write | mandatory | Compresses the configuration of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x) = 0 for dis… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.49 | ColumnexNetModuleLinkStatConfig | read-write | mandatory | Compresses the link status configuration of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x)… |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.50 | ColumnexNetModuleResetTimeStamp | read-only | mandatory | The value of sysUpTime at the point that the module repeater state machine was last reset. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.51 | ColumnexNetModuleLinkStatus | read-only | mandatory | Compresses the link status of all of this module's ports into a two-byte integer value. Sums f(x) as x goes from 1 to number of ports, where f(x) = 0 for port … |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.52 | ColumnexNetModuleFwVer | read-only | mandatory | The firmware revision of the GAP processor on the module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.53 | ColumnexNetModuleFwFeaturePkg | read-only | mandatory | The feature package associated with the GAP processor on the module. |
| 1.3.6.1.4.1.66.1.3.2.2.1.1.54 | ColumnexNetModuleSelfTestResult | read-only | mandatory | The self-test result value returned by the GAP processor on the module. Zero indicates that the module passed all tests. Bits set in the result indicate error … |
| 1.3.6.1.4.1.66.1.3.2.3 | NodeexNetPort | |||
| 1.3.6.1.4.1.66.1.3.2.3.1 | TableexNetPortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by knowing the number of occupied slots in the exNetSlotConfigTable and the number of ports that are on … |
| 1.3.6.1.4.1.66.1.3.2.3.1.1 | RowexNetPortEntry | not-accessible | mandatory | A port entry containing objects at the port level for a particular port. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.1 | ColumnexNetPortModuleIndex | read-only | mandatory | A unique value for each module. Its value ranges between 1 and exNetChassisCapacity. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.2 | ColumnexNetPortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and the value of exNetBoardNumOfPorts for this module. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.3 | ColumnexNetPortLinkStatus | read-only | mandatory | For 10BASE-T ports: this is the link integrity test defined by the 10BASE-T standard. If link status test is enabled, this flag indicates whether the link is a… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.4 | ColumnexNetPortPartStatus | read-write | mandatory | Indicates whether the port is currently partitioned by the Concentrator's auto-partition protection. (The Concentrator automatically partitions a port if it is… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.5 | ColumnexNetPortJabberStatus | read-only | mandatory | Tells whether the DTE connected to the port is jabbering (receiving a frame longer than 5 msec in duration). |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.6 | ColumnexNetPortFrmsRxOk | read-only | mandatory | A count of frames that are successfully received by the port. This counter does not include frames received with frame-too- long, runt, FCS, or alignment error… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.7 | ColumnexNetPortOctetsRxOk | read-only | mandatory | A count of data and padding octets in frames that are successfully received by the port. This counter does not include frames received with frame-too-long, run… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.10 | ColumnexNetPortColls | read-only | mandatory | Number of times this port was involved in a collision with another port in the same Hub. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.11 | ColumnexNetPortTooLongErrors | read-only | mandatory | A count of frames that are received by the port and exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.12 | ColumnexNetPortRuntErrors | read-only | mandatory | Number of frames received by the port that have a correct preamble (including double 1), but are shorter than the minimum legal frame size of 64 bytes (512 bit… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.13 | ColumnexNetPortAlignErrors | read-only | mandatory | Number of frames received by the port that are byte-misaligned, such that the number of bits is not a multiple of 8. (These frames do not pass the frame check … |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.14 | ColumnexNetPortFcsErrors | read-only | mandatory | A count of frames received by the port that are an integral number of octets in length and do not pass the frame check sequence (FCS) check. This counter is in… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.15 | ColumnexNetPortLateCollErrors | read-only | mandatory | Number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. Late collisions are not included in the c… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.40 | ColumnexNetPortName | read-write | mandatory | A descriptive string that can be used by a network administrator to name the port. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.41 | ColumnexNetPortJabbers | read-only | mandatory | A count of the number of times that the jabber function had to be invoked because a frame received from this port exceeded 5 msec in duration. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.42 | ColumnexNetPortSfdErrors | read-only | mandatory | Amount of activity from this port where a double-zero is seen before the start-frame delimiter (double-1). (This could indicate a polarity problem.) |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.43 | ColumnexNetPortAutoPartitions | read-only | mandatory | Indicates how often this port has been automatically partitioned by the module repeater function. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.44 | ColumnexNetPortOosBitRate | read-only | mandatory | Number of times that frames have been received from this link with the transmission frequency (data rate) badly out of spec. This counter is incremented when t… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.45 | ColumnexNetPortLinkErrors | read-only | mandatory | This composite counter includes jabbers, auto-partitions, late collisions, start-frame delimiter errors, and out-of-spec bit rate errors. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.46 | ColumnexNetPortFrameErrors | read-only | mandatory | This composite counter includes frame check sequence errors, fragments, short frames, long frames, and alignment errors. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.47 | ColumnexNetPortFragErrors | read-only | mandatory | Fragments of packets, shorter than the minimum legal transmission size of 96 bits, that are received on this port. Fragments indicate an external noise hit (a … |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.48 | ColumnexNetPortType | read-only | mandatory | The type of the port. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.49 | ColumnexNetPortMauType | read-only | mandatory | The type of the MAU attached to the port. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.50 | ColumnexNetPortConfig | read-write | mandatory | The administrative state of the port. If both transmit and receive are enabled, the port state is enabled. If both transmit and receive are disabled, the port … |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.51 | ColumnexNetPortLinkStatConfig | read-write | mandatory | The administrative status of the link status test for this link. If both transmit and receive are enabled, the link status test is enabled. If both transmit an… |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.52 | ColumnexNetPortPolarity | read-write | mandatory | The polarity of the port. Applies only to ports with MAU type 10BASE-T. The value other(1) is returned for other MAU types. |
| 1.3.6.1.4.1.66.1.3.2.3.1.1.53 | ColumnexNetPortTransmitTest | read-write | mandatory | Whether or not transmit test is enabled on the link. Transmit test applies only to links of type 10BASE-T. The value other(1) is returned for other MAU types. … |
| 1.3.6.1.4.1.66.1.3.2.4 | NodeexNetMgmt | |||
| 1.3.6.1.4.1.66.1.3.2.4.1 | ScalarexNetMgmtType | read-only | mandatory | The DAVID ExpressNet Ethernet network management type. |
| 1.3.6.1.4.1.66.1.3.2.4.2 | ScalarexNetMgmtHwVer | read-only | mandatory | The network management ICM hardware version number: 1=Rev. A, 2=Rev. B, etc. |
| 1.3.6.1.4.1.66.1.3.2.4.3 | ScalarexNetMgmtFwVer | read-only | mandatory | The network management ICP firmware version. |
| 1.3.6.1.4.1.66.1.3.2.4.4 | ScalarexNetMgmtSwMajorVer | read-only | mandatory | The network management major software version number, where the version number is of the form major.minor, e.g. 3.0. Refers to the ECP (External Communications… |
| 1.3.6.1.4.1.66.1.3.2.4.5 | ScalarexNetMgmtSwMinorVer | read-only | mandatory | The network management minor software version number, where the version number is of the form major.minor, e.g. 3.0. Refers to the ECP. |
| 1.3.6.1.4.1.66.1.3.2.4.6 | ScalarexNetMgmtStatus | read-only | mandatory | Indicates that the network management is on line and operating. For the DAVID ExpressNet Concentrators, management status is always online(2). |
| 1.3.6.1.4.1.66.1.3.2.4.7 | ScalarexNetMgmtMode | read-write | mandatory | Indicates whether the network management is operating in primary or secondary mode. Presently, all DAVID ExpressNet Concentrators return primary(1). |
| 1.3.6.1.4.1.66.1.3.2.4.8 | ScalarexNetMgmtReset | read-write | mandatory | Network management reset status. Writing a 2 to this object will reset the network management (stop refreshing the watchdog timer) and restart. |
| 1.3.6.1.4.1.66.1.3.2.4.9 | ScalarexNetMgmtRestart | read-write | mandatory | Network management restart status. Writing a 2 to this object will restart the network management. This initializes all the counters, rereads the EEPROM data s… |
| 1.3.6.1.4.1.66.1.3.2.4.10 | ScalarexNetMgmtIpAddr | read-write | mandatory | The network management's administrative IP address. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmtReset) is issued… |
| 1.3.6.1.4.1.66.1.3.2.4.11 | ScalarexNetMgmtNetMask | read-write | mandatory | The network management's administrative subnet mask. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmtReset) is issue… |
| 1.3.6.1.4.1.66.1.3.2.4.12 | ScalarexNetMgmtDefaultGateway | read-write | mandatory | The network management's administrative default gateway IP address. This parameter will take effect ONLY after a restart (exNetMgmtRestart) or reset (exNetMgmt… |
| 1.3.6.1.4.1.66.1.3.2.4.17 | ScalarexNetMgmtBaudRate | read-only | mandatory | Returns the baud rate in bits per second of the RS-232 port. Note: The Concentrators autobaud to match the device attached to the RS-232 port. |
| 1.3.6.1.4.1.66.1.3.2.4.19 | ScalarexNetMgmtLocation | read-write | mandatory | This is an informational string that could be used to show the physical location (i.e., area) of the network management or Concentrator. This parameter is save… |
| 1.3.6.1.4.1.66.1.3.2.4.20 | TableexNetMgmtTrapReceiverTable | not-accessible | mandatory | This entity's Trap Receiver Table (10 entries). |
| 1.3.6.1.4.1.66.1.3.2.4.20.1 | RowexNetMgmtTrapReceiverEntry | not-accessible | mandatory | A destination address and community string to a particular trap receiver. |
| 1.3.6.1.4.1.66.1.3.2.4.20.1.1 | ColumnexNetMgmtTrapType | read-write | mandatory | Setting this object to the value invalid(2) invalidates the corresponding entry in the exNetTrapReceiverTable. That is, it effectively disassociates the addres… |
| 1.3.6.1.4.1.66.1.3.2.4.20.1.2 | ColumnexNetMgmtTrapReceiverAddr | read-write | mandatory | IP address for trap receiver. |
| 1.3.6.1.4.1.66.1.3.2.4.20.1.3 | ColumnexNetMgmtTrapReceiverComm | read-write | mandatory | Community string used for traps. |
| 1.3.6.1.4.1.66.1.3.2.4.21 | ScalarexNetMgmtAuthTrap | read-write | mandatory | Enable or disable the use of authentication error trap generation. |