DISMAN-TRACEROUTE-MIB
84 objects
The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides access to the traceroute capability at a remote host. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4560; see the RFC itself for full legal notices.
Imported Objects
| DISMAN-PING-MIB | -- RFC4001 OperationResponseStatus |
| IF-MIB | -- RFC3411 InterfaceIndexOrZero -- RFC2863 |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | -- RFC2580 SnmpAdminString |
| SNMPv2-CONF | -- RFC2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 RowStatus DateAndTime StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.81 | IdentitytraceRouteMIB | The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides access to the traceroute capability at a remote host. Copyright (C) The Internet Society (2006). This versi… | ||
| 1.3.6.1.2.1.81.0 | NodetraceRouteNotifications | |||
| 1.3.6.1.2.1.81.0.1 | NotificationtraceRoutePathChange | current | The path to a target has changed. | |
| 1.3.6.1.2.1.81.0.2 | NotificationtraceRouteTestFailed | current | Could not determine the path to a target. | |
| 1.3.6.1.2.1.81.0.3 | NotificationtraceRouteTestCompleted | current | The path to a target has just been determined. | |
| 1.3.6.1.2.1.81.1 | NodetraceRouteObjects | |||
| 1.3.6.1.2.1.81.1.1 | ScalartraceRouteMaxConcurrentRequests | read-write | current | The maximum number of concurrent active traceroute requests that are allowed within an agent implementation. A value of 0 for this object implies that there is… |
| 1.3.6.1.2.1.81.1.2 | TabletraceRouteCtlTable | not-accessible | current | Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host. The results of traceroute operat… |
| 1.3.6.1.2.1.81.1.2.1 | RowtraceRouteCtlEntry | not-accessible | current | Defines an entry in the traceRouteCtlTable. The first index element, traceRouteCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for … |
| 1.3.6.1.2.1.81.1.2.1.1 | ColumntraceRouteCtlOwnerIndex | not-accessible | current | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 3415, VACM) for tables in which mul… |
| 1.3.6.1.2.1.81.1.2.1.2 | ColumntraceRouteCtlTestName | not-accessible | current | The name of a traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex. |
| 1.3.6.1.2.1.81.1.2.1.3 | ColumntraceRouteCtlTargetAddressType | read-create | current | Specifies the type of host address to be used on the traceroute request at the remote host. |
| 1.3.6.1.2.1.81.1.2.1.4 | ColumntraceRouteCtlTargetAddress | read-create | current | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by examining the value of the correspondi… |
| 1.3.6.1.2.1.81.1.2.1.5 | ColumntraceRouteCtlByPassRouteTable | read-create | current | The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly… |
| 1.3.6.1.2.1.81.1.2.1.6 | ColumntraceRouteCtlDataSize | read-create | current | Specifies the size of the data portion of a traceroute request, in octets. If the RECOMMENDED traceroute method (UDP datagrams as probes) is used, then the val… |
| 1.3.6.1.2.1.81.1.2.1.7 | ColumntraceRouteCtlTimeOut | read-create | current | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.2.1.81.1.2.1.8 | ColumntraceRouteCtlProbesPerHop | read-create | current | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
| 1.3.6.1.2.1.81.1.2.1.9 | ColumntraceRouteCtlPort | read-create | current | Specifies the (initial) UDP port to send the traceroute request to. A port needs to be specified that is not in use at the destination (target) host. The defau… |
| 1.3.6.1.2.1.81.1.2.1.10 | ColumntraceRouteCtlMaxTtl | read-create | current | Specifies the maximum time-to-live value. |
| 1.3.6.1.2.1.81.1.2.1.11 | ColumntraceRouteCtlDSField | read-create | current | Specifies the value to store in the Type of Service (TOS) octet in the IPv4 header or in the Traffic Class octet in the IPv6 header, respectively, of the IP pa… |
| 1.3.6.1.2.1.81.1.2.1.12 | ColumntraceRouteCtlSourceAddressType | read-create | current | Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when a traceroute operation is performed. |
| 1.3.6.1.2.1.81.1.2.1.13 | ColumntraceRouteCtlSourceAddress | read-create | current | Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one… |
| 1.3.6.1.2.1.81.1.2.1.14 | ColumntraceRouteCtlIfIndex | read-create | current | Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specifie… |
| 1.3.6.1.2.1.81.1.2.1.15 | ColumntraceRouteCtlMiscOptions | read-create | current | Enables an application to specify implementation-dependent options. |
| 1.3.6.1.2.1.81.1.2.1.16 | ColumntraceRouteCtlMaxFailures | read-create | current | The value of this object indicates the maximum number of consecutive timeouts allowed before a remote traceroute request is terminated. A value of either 255 (… |
| 1.3.6.1.2.1.81.1.2.1.17 | ColumntraceRouteCtlDontFragment | read-create | current | This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables a manual PATH MTU test is performed. |
| 1.3.6.1.2.1.81.1.2.1.18 | ColumntraceRouteCtlInitialTtl | read-create | current | The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path. |
| 1.3.6.1.2.1.81.1.2.1.19 | ColumntraceRouteCtlFrequency | read-create | current | The number of seconds to wait before repeating a traceroute test, as defined by the value of the various objects in the corresponding row. After a single test … |
| 1.3.6.1.2.1.81.1.2.1.20 | ColumntraceRouteCtlStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.81.1.2.1.21 | ColumntraceRouteCtlAdminStatus | read-create | current | Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2… |
| 1.3.6.1.2.1.81.1.2.1.22 | ColumntraceRouteCtlDescr | read-create | current | The purpose of this object is to provide a descriptive name of the remote traceroute test. |
| 1.3.6.1.2.1.81.1.2.1.23 | ColumntraceRouteCtlMaxRows | read-create | current | The maximum number of corresponding entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest corresponding entr… |
| 1.3.6.1.2.1.81.1.2.1.24 | ColumntraceRouteCtlTrapGeneration | read-create | current | The value of this object determines when and whether to generate a notification for this entry: pathChange(0) - Generate a traceRoutePathChange notification wh… |
| 1.3.6.1.2.1.81.1.2.1.25 | ColumntraceRouteCtlCreateHopsEntries | read-create | current | The current path for a traceroute test is kept in the traceRouteHopsTable on a per-hop basis when the value of this object is true(1). |
| 1.3.6.1.2.1.81.1.2.1.26 | ColumntraceRouteCtlType | read-create | current | The value of this object is used either to report or to select the implementation method to be used for performing a traceroute operation. The value of this ob… |
| 1.3.6.1.2.1.81.1.2.1.27 | ColumntraceRouteCtlRowStatus | read-create | current | This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in a deletion of all corresponding (… |
| 1.3.6.1.2.1.81.1.3 | TabletraceRouteResultsTable | not-accessible | current | Defines the Remote Operations Traceroute Results Table for keeping track of the status of a traceRouteCtlEntry. An entry is added to the traceRouteResultsTable… |
| 1.3.6.1.2.1.81.1.3.1 | RowtraceRouteResultsEntry | not-accessible | current | Defines an entry in the traceRouteResultsTable. The traceRouteResultsTable has the same indexing as the traceRouteCtlTable so that a traceRouteResultsEntry cor… |
| 1.3.6.1.2.1.81.1.3.1.1 | ColumntraceRouteResultsOperStatus | read-only | current | Reflects the operational state of an traceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. completed(3) - Test is completed. |
| 1.3.6.1.2.1.81.1.3.1.2 | ColumntraceRouteResultsCurHopCount | read-only | current | Reflects the current TTL value (from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by traceRouteCtlMaxTtl. |
| 1.3.6.1.2.1.81.1.3.1.3 | ColumntraceRouteResultsCurProbeCount | read-only | current | Reflects the current probe count (1..10) for a remote traceroute operation. The maximum probe count is determined by traceRouteCtlProbesPerHop. |
| 1.3.6.1.2.1.81.1.3.1.4 | ColumntraceRouteResultsIpTgtAddrType | read-only | current | This object indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object. |
| 1.3.6.1.2.1.81.1.3.1.5 | ColumntraceRouteResultsIpTgtAddr | read-only | current | This object reports the IP address associated with a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of thi… |
| 1.3.6.1.2.1.81.1.3.1.6 | ColumntraceRouteResultsTestAttempts | read-only | current | The current number of attempts to determine a path to a target. The value of this object MUST be started at 0. |
| 1.3.6.1.2.1.81.1.3.1.7 | ColumntraceRouteResultsTestSuccesses | read-only | current | The current number of attempts to determine a path to a target that have succeeded. The value of this object MUST be reported as 0 when no attempts have succee… |
| 1.3.6.1.2.1.81.1.3.1.8 | ColumntraceRouteResultsLastGoodPath | read-only | current | The date and time when the last complete path was determined. A path is complete if responses were received or timeout occurred for each hop on the path; i.e.,… |
| 1.3.6.1.2.1.81.1.4 | TabletraceRouteProbeHistoryTable | not-accessible | current | Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation. An implementation of this MIB will remove the oldest … |
| 1.3.6.1.2.1.81.1.4.1 | RowtraceRouteProbeHistoryEntry | not-accessible | current | Defines a table for storing the results of a traceroute operation. Entries in this table are limited by the value of the corresponding traceRouteCtlMaxRows obj… |
| 1.3.6.1.2.1.81.1.4.1.1 | ColumntraceRouteProbeHistoryIndex | not-accessible | current | An entry in this table is created when the result of a traceroute probe is determined. The initial 2 instance identifier index values identify the traceRouteCt… |
| 1.3.6.1.2.1.81.1.4.1.2 | ColumntraceRouteProbeHistoryHopIndex | not-accessible | current | Indicates which hop in a traceroute path the probe's results are for. The value of this object is initially determined by the value of traceRouteCtlInitialTtl. |
| 1.3.6.1.2.1.81.1.4.1.3 | ColumntraceRouteProbeHistoryProbeIndex | not-accessible | current | Indicates the index of a probe for a particular hop in a traceroute path. The number of probes per hop is determined by the value of the corresponding traceRou… |
| 1.3.6.1.2.1.81.1.4.1.4 | ColumntraceRouteProbeHistoryHAddrType | read-only | current | This objects indicates the type of address stored in the corresponding traceRouteProbeHistoryHAddr object. |
| 1.3.6.1.2.1.81.1.4.1.5 | ColumntraceRouteProbeHistoryHAddr | read-only | current | The address of a hop in a traceroute path. This object is not allowed to be a DNS name. The value of the corresponding object, traceRouteProbeHistoryHAddrType,… |
| 1.3.6.1.2.1.81.1.4.1.6 | ColumntraceRouteProbeHistoryResponse | read-only | current | The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is repo… |
| 1.3.6.1.2.1.81.1.4.1.7 | ColumntraceRouteProbeHistoryStatus | read-only | current | The result of a traceroute operation made by a remote host for a particular probe. |
| 1.3.6.1.2.1.81.1.4.1.8 | ColumntraceRouteProbeHistoryLastRC | read-only | current | The last implementation-method-specific reply code received. Traceroute is usually implemented by transmitting a series of probe packets with increasing time-t… |
| 1.3.6.1.2.1.81.1.4.1.9 | ColumntraceRouteProbeHistoryTime | read-only | current | Timestamp for when this probe's results were determined. |
| 1.3.6.1.2.1.81.1.5 | TabletraceRouteHopsTable | not-accessible | current | Defines the Remote Operations Traceroute Hop Table for keeping track of the results of traceroute tests on a per-hop basis. |
| 1.3.6.1.2.1.81.1.5.1 | RowtraceRouteHopsEntry | not-accessible | current | Defines an entry in the traceRouteHopsTable. The first two index elements identify the traceRouteCtlEntry that a traceRouteHopsEntry belongs to. The third inde… |
| 1.3.6.1.2.1.81.1.5.1.1 | ColumntraceRouteHopsHopIndex | not-accessible | current | Specifies the hop index for a traceroute hop. Values for this object with respect to the same traceRouteCtlOwnerIndex and traceRouteCtlTestName MUST start at 1… |
| 1.3.6.1.2.1.81.1.5.1.2 | ColumntraceRouteHopsIpTgtAddressType | read-only | current | This object indicates the type of address stored in the corresponding traceRouteHopsIpTgtAddress object. |
| 1.3.6.1.2.1.81.1.5.1.3 | ColumntraceRouteHopsIpTgtAddress | read-only | current | This object reports the IP address associated with the hop. A value for this object should be reported as a numeric IP address, not as a DNS name. The address … |
| 1.3.6.1.2.1.81.1.5.1.4 | ColumntraceRouteHopsMinRtt | read-only | current | The minimum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.2.1.81.1.5.1.5 | ColumntraceRouteHopsMaxRtt | read-only | current | The maximum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.2.1.81.1.5.1.6 | ColumntraceRouteHopsAverageRtt | read-only | current | The current average traceroute round-trip-time (RTT) for this hop. |
| 1.3.6.1.2.1.81.1.5.1.7 | ColumntraceRouteHopsRttSumOfSquares | read-only | current | This object contains the sum of the squares of all round-trip-times received for this hop. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.2.1.81.1.5.1.8 | ColumntraceRouteHopsSentProbes | read-only | current | The value of this object reflects the number of probes sent for this hop during this traceroute test. The value of this object should start at 0. |
| 1.3.6.1.2.1.81.1.5.1.9 | ColumntraceRouteHopsProbeResponses | read-only | current | Number of responses received for this hop during this traceroute test. This value of this object should start at 0. |
| 1.3.6.1.2.1.81.1.5.1.10 | ColumntraceRouteHopsLastGoodProbe | read-only | current | Date and time at which the last response was received for a probe for this hop during this traceroute test. |
| 1.3.6.1.2.1.81.2 | NodetraceRouteConformance | |||
| 1.3.6.1.2.1.81.2.1 | NodetraceRouteCompliances | |||
| 1.3.6.1.2.1.81.2.1.1 | CompliancetraceRouteCompliance | read-only | deprecated | The compliance statement for the DISMAN-TRACEROUTE-MIB. This compliance statement has been deprecated because the traceRouteGroup and the traceRouteTimeStampGr… |
| 1.3.6.1.2.1.81.2.1.2 | CompliancetraceRouteFullCompliance | read-only | current | The compliance statement for SNMP entities that fully implement the DISMAN-TRACEROUTE-MIB. |
| 1.3.6.1.2.1.81.2.1.3 | CompliancetraceRouteMinimumCompliance | read-only | current | The minimum compliance statement for SNMP entities which implement the minimal subset of the DISMAN-TRACEROUTE-MIB. Implementors might choose this subset for s… |
| 1.3.6.1.2.1.81.2.2 | NodetraceRouteGroups | |||
| 1.3.6.1.2.1.81.2.2.1 | GrouptraceRouteGroup | deprecated | The group of objects that constitute the remote traceroute operation. | |
| 1.3.6.1.2.1.81.2.2.2 | GrouptraceRouteTimeStampGroup | deprecated | The group of DateAndTime objects. | |
| 1.3.6.1.2.1.81.2.2.3 | GrouptraceRouteNotificationsGroup | current | The notifications that are required to be supported by implementations of this MIB. | |
| 1.3.6.1.2.1.81.2.2.4 | GrouptraceRouteHopsTableGroup | current | The group of objects that constitute the traceRouteHopsTable. | |
| 1.3.6.1.2.1.81.2.2.5 | GrouptraceRouteMinimumGroup | current | The group of objects that constitute the remote traceroute operation. | |
| 1.3.6.1.2.1.81.2.2.6 | GrouptraceRouteCtlRowStatusGroup | current | The RowStatus object of the traceRouteCtlTable. | |
| 1.3.6.1.2.1.81.2.2.7 | GrouptraceRouteHistoryGroup | current | The group of objects that constitute the history capability. | |
| 1.3.6.1.2.1.81.3 | NodetraceRouteImplementationTypeDomains | |||
| 1.3.6.1.2.1.81.3.1 | IdentitytraceRouteUsingUdpProbes | current | Indicates that an implementation is using UDP probes to perform the traceroute operation. |