DL5400-MIB

292 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC-1215	TRAP-TYPE
RFC1155-SMI	Counter enterprises IpAddress TimeTicks

OID	Name	Access	Status	Description
1.3.6.1.4.1.300	Nodedigital-link
1.3.6.1.4.1.300.110	Nodedl5400
1.3.6.1.4.1.300.110.1	Nodeconfiguration
1.3.6.1.4.1.300.110.1	Nodedl5400ModulesAppear			There is a module appeared in the device.
1.3.6.1.4.1.300.110.1.1	NodeunitLevelConfig
1.3.6.1.4.1.300.110.1.1.1	ScalarunitSerialNum	read-only	mandatory	An ID that uniquely and globally identifies the unit. A Serial Number must consist of printable ASCII characters 0x20..0x7E.
1.3.6.1.4.1.300.110.1.1.2	ScalarunitName	read-write	mandatory	A descriptive name that identifies the DL5400 unit. Use of this parameter is optional, but recommended to aid management.
1.3.6.1.4.1.300.110.1.1.3	ScalarunitHwRev	read-only	mandatory	The DL5400 hardware revision.
1.3.6.1.4.1.300.110.1.1.4	ScalarunitSwRev	read-only	mandatory	The DL5400 software revision.
1.3.6.1.4.1.300.110.1.1.5	ScalarunitMibRev	read-only	mandatory	The DL5400 MIB revision.
1.3.6.1.4.1.300.110.1.1.6	ScalarunitFrontPnl	read-write	mandatory	This feature enables (ON) or disables (OFF) the users ability to make changes in the configuration or run tests from the front panel display and buttons.
1.3.6.1.4.1.300.110.1.1.7	ScalarunitDateYear	read-write	mandatory	The DL5400's date: Year.
1.3.6.1.4.1.300.110.1.1.8	ScalarunitDateMonth	read-write	mandatory	The DL5400's date: Month.
1.3.6.1.4.1.300.110.1.1.9	ScalarunitDateDay	read-write	mandatory	The DL5400's date: Day.
1.3.6.1.4.1.300.110.1.1.10	ScalarunitTimeHour	read-write	mandatory	The DL5400's time: Hour.
1.3.6.1.4.1.300.110.1.1.11	ScalarunitTimeMinute	read-write	mandatory	The DL5400's time: Minute.
1.3.6.1.4.1.300.110.1.1.12	ScalarunitTimeSecond	read-write	mandatory	The DL5400's time: Second.
1.3.6.1.4.1.300.110.1.1.13	ScalarunitTimezone	read-write	mandatory	This object is used to indicate the timezone associated with the time of day that exists on DL5400 System. The enumerated values are defined as hours west of G…
1.3.6.1.4.1.300.110.1.1.14	ScalarunitLedStatus	read-only	mandatory	The defined values have the following description Off - The unit is not equipped or is provision in an out of Service state Green - No alarms, status or test c…
1.3.6.1.4.1.300.110.1.1.15	ScalarunitTimeStamp	read-only	mandatory	Time Stamp on the unit of format MM/DD/YYYY HH:MM:SS This will be sent as a varbind along with all the traps to NMS manager
1.3.6.1.4.1.300.110.1.1.16	ScalarunitModelType	read-only	mandatory	The unit model type
1.3.6.1.4.1.300.110.1.1.17	ScalarunitRouteMode	read-write	mandatory	Unit Route Mode
1.3.6.1.4.1.300.110.1.2	NodeunitTelnetConfig
1.3.6.1.4.1.300.110.1.2.1	ScalarunitTelnetIdleTimeout	read-write	mandatory	This object is used to indicate number of minutes of inactivity required before setting the telnet access point to auto-logoff.
1.3.6.1.4.1.300.110.1.3	NodeunitDteEnetCfg
1.3.6.1.4.1.300.110.1.3.1	TabledteEnetTable	not-accessible	mandatory	Table of all Dte Ethernet ports in the system
1.3.6.1.4.1.300.110.1.3.1.1	RowdteEnetEntry	not-accessible	mandatory	An entry in the dteEnetTable
1.3.6.1.4.1.300.110.1.3.1.1.1	ColumndteEnetIndex	read-only	mandatory	The dteEnet port index
1.3.6.1.4.1.300.110.1.3.1.1.2	ColumndteEnetIpAddress	read-write	mandatory	IP address assigned to the DTE port of the DL5400.
1.3.6.1.4.1.300.110.1.3.1.1.3	ColumndteEnetSubnetMask	read-write	mandatory	IP Subnet mask assigned to the DTE port of the DL5400.
1.3.6.1.4.1.300.110.1.3.1.1.4	ColumndteEnetMacAddress	read-only	mandatory	Ethernet MAC address of this dte port
1.3.6.1.4.1.300.110.1.3.1.1.5	ColumndteEnetProtocol	read-write	mandatory	Ethernet protocol used by the DL5400. dix is also called Ethernet-II.
1.3.6.1.4.1.300.110.1.3.1.1.6	ColumndteEnetOper	read-write	mandatory	Ethernet operation used by the DL5400.
1.3.6.1.4.1.300.110.1.3.1.1.7	ColumndteEnetMode	read-write	mandatory	Ethernet mode used by the DL5400.
1.3.6.1.4.1.300.110.1.3.1.1.8	ColumndteEnetOperStatus	read-only	mandatory	Ethernet operation status
1.3.6.1.4.1.300.110.1.3.1.1.9	ColumndteEnetModeStatus	read-only	mandatory	Ethernet Mode status
1.3.6.1.4.1.300.110.1.5	Nodecomm1SerialConfig
1.3.6.1.4.1.300.110.1.5.1	Scalarcomm1SerialPortState	read-write	mandatory	This object is used to enable or disable port.
1.3.6.1.4.1.300.110.1.5.2	Scalarcomm1SerialBaudRate	read-write	mandatory	COMM 1 Baud Rate.
1.3.6.1.4.1.300.110.1.5.3	Scalarcomm1SerialBitsPerWord	read-write	mandatory	COMM 1 Bits Per Word.
1.3.6.1.4.1.300.110.1.5.4	Scalarcomm1SerialStopBits	read-write	mandatory	COMM 1 Stop Bits.
1.3.6.1.4.1.300.110.1.5.5	Scalarcomm1SerialParity	read-write	mandatory	COMM 1 Parity.
1.3.6.1.4.1.300.110.1.5.6	Scalarcomm1SerialFlowControl	read-write	mandatory	COMM 1 Flow Control.
1.3.6.1.4.1.300.110.1.5.7	Scalarcomm1SerialLogoutOnLos	read-write	mandatory	This object is used to enable or disable auto-logoff on loss of DSR.
1.3.6.1.4.1.300.110.1.5.8	Scalarcomm1SerialIdleTimeout	read-write	mandatory	This object is used to indicate number of minutes of inactivity required before setting this serial access point to auto-logoff.
1.3.6.1.4.1.300.110.1.6	Nodecomm2SerialConfig
1.3.6.1.4.1.300.110.1.6.1	Scalarcomm2SerialPortState	read-write	mandatory	This object is used to enable or disable port.
1.3.6.1.4.1.300.110.1.6.2	Scalarcomm2SerialBaudRate	read-write	mandatory	COMM 2 Baud Rate.
1.3.6.1.4.1.300.110.1.6.3	Scalarcomm2SerialBitsPerWord	read-write	mandatory	COMM 2 Bits Per Word.
1.3.6.1.4.1.300.110.1.6.4	Scalarcomm2SerialStopBits	read-write	mandatory	COMM 2 Stop Bits.
1.3.6.1.4.1.300.110.1.6.5	Scalarcomm2SerialParity	read-write	mandatory	COMM 2 Parity.
1.3.6.1.4.1.300.110.1.6.6	Scalarcomm2SerialFlowControl	read-write	mandatory	COMM 2 Flow Control. HwFlowControl option is not applicable for multidrop serial port when in MultiDrop mode
1.3.6.1.4.1.300.110.1.6.7	Scalarcomm2SerialLogoutOnLos	read-write	mandatory	This object is used to enable or disable auto-logoff on loss of DSR.
1.3.6.1.4.1.300.110.1.6.8	Scalarcomm2SerialIdleTimeout	read-write	mandatory	This object is used to indicate number of minutes of inactivity required before setting this serial access point to auto-logoff.
1.3.6.1.4.1.300.110.1.6.9	Scalarcomm2InMDmode	read-write	mandatory	This object indicates if this serial port is in multidrop mode or not.
1.3.6.1.4.1.300.110.1.6.10	Scalarcomm2InMDId	read-write	mandatory	Identifies the multidrop session
1.3.6.1.4.1.300.110.1.7	NodenetConfig
1.3.6.1.4.1.300.110.1.7.1	ScalarnetPriTxClk	read-write	mandatory	The primary transmit clock source for DL5400.
1.3.6.1.4.1.300.110.1.7.2	ScalarnetPriLoopPort	read-write	mandatory	The primary loop port clock source for DL5400.
1.3.6.1.4.1.300.110.1.7.3	ScalarnetSecTxClk	read-write	mandatory	The secondary transmit clock source for DL5400.
1.3.6.1.4.1.300.110.1.7.4	ScalarnetSecLoopPort	read-write	mandatory	The secondary loop port clock source for DL5400.
1.3.6.1.4.1.300.110.1.7.5	ScalarnetExtClkFrequency	read-write	mandatory	The defined parameters are the external clock frequencies. The user must provision what frequency is to be used
1.3.6.1.4.1.300.110.1.7.6	ScalarnetPriStatus	read-only	mandatory	Primary clock operation status
1.3.6.1.4.1.300.110.1.7.7	ScalarnetSecStatus	read-only	mandatory	Secondary clock operation status
1.3.6.1.4.1.300.110.1.7.8	ScalarnetActiveStatus	read-only	mandatory	Active clock operation status
1.3.6.1.4.1.300.110.1.7.9	ScalarnetSuppressYeldet	read-write	mandatory	This enables or disables the suppression of Yellow Alarm (RAI) detection. Applicable in SF Framing
1.3.6.1.4.1.300.110.1.7.10	ScalarnetLineType	read-only	mandatory	Tells if this is a T1 or E1 device
1.3.6.1.4.1.300.110.1.7.11	TablenetPortTable	not-accessible	mandatory	Table of all network port in the system.
1.3.6.1.4.1.300.110.1.7.11.1	RownetPortEntry	not-accessible	mandatory	An entry in the Net Port Table
1.3.6.1.4.1.300.110.1.7.11.1.1	ColumnnetPortIndex	read-only	mandatory	The network port index.
1.3.6.1.4.1.300.110.1.7.11.1.2	ColumnnetAdmin	read-write	mandatory	Tells the Net DS1 Admin state
1.3.6.1.4.1.300.110.1.7.11.1.3	ColumnnetFramingFormat	read-write	mandatory	This variable describes the Framing Format option for the network port.
1.3.6.1.4.1.300.110.1.7.11.1.4	ColumnnetLineCode	read-write	mandatory	This variable describes the Line Code option for the network port.
1.3.6.1.4.1.300.110.1.7.11.1.5	ColumnnetLBO	read-write	mandatory	This selects the line build out value in dBs and applies to CSU/DSU mode only.
1.3.6.1.4.1.300.110.1.7.11.1.6	ColumnnetEGL	read-write	mandatory	This selects the equalizer gain limit in dBs and applies to CSU mode only.
1.3.6.1.4.1.300.110.1.7.11.1.7	ColumnnetFDL	read-write	mandatory	'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to…
1.3.6.1.4.1.300.110.1.7.11.1.8	ColumnnetSetCode	read-write	mandatory	enabled or disabled setCode feature.
1.3.6.1.4.1.300.110.1.7.11.1.9	ColumnnetClock	read-write	mandatory	This selects the source of Transmit clock.
1.3.6.1.4.1.300.110.1.7.11.1.10	ColumnnetFrameStatus	read-only	mandatory	Framing Operational State.
1.3.6.1.4.1.300.110.1.7.11.1.11	ColumnnetFrameUpTime	read-only	mandatory	Tells the Framing UpTime.
1.3.6.1.4.1.300.110.1.8	NodeunitSnmpConfig
1.3.6.1.4.1.300.110.1.8.1	TableunitSnmpTrapAddrTable	not-accessible	mandatory	A list of IP addresses of the management stations along with information on how to direct a trap to that addresss
1.3.6.1.4.1.300.110.1.8.1.1	RowunitSnmpTrapAddrEntry	not-accessible	mandatory	An entry in the Snmp trap address table
1.3.6.1.4.1.300.110.1.8.1.1.1	ColumnunitSnmpTrapHostAddr	read-only	mandatory	Specifies the IP address of the management station to which this unit sends traps.
1.3.6.1.4.1.300.110.1.8.1.1.2	ColumnunitSnmpTrapDirection	read-only	mandatory	Specifies the way the trap is to be sent to the host
1.3.6.1.4.1.300.110.1.8.2	ScalarunitSnmpTrapDevState	read-write	mandatory	Specifies whether to forward or block SNMP traps on device.
1.3.6.1.4.1.300.110.1.8.3	ScalarunitSnmpTrapCommunity	read-write	mandatory	Specifies the Community Name of the management station to which this unit sends traps.
1.3.6.1.4.1.300.110.1.9	NodeunitPPPConfig
1.3.6.1.4.1.300.110.1.9.1	TablepppPortTable	not-accessible	mandatory	Table of all network ports in the system.
1.3.6.1.4.1.300.110.1.9.1.1	RowpppPortEntry	not-accessible	mandatory	An entry in the PPP Port table
1.3.6.1.4.1.300.110.1.9.1.1.1	ColumnpppPortIndex	read-only	mandatory	Port number of the Net port.
1.3.6.1.4.1.300.110.1.9.1.1.2	ColumnpppPortInitialMRU	read-write	mandatory	The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP ent…
1.3.6.1.4.1.300.110.1.9.1.1.3	ColumnpppPortMagicNumber	read-write	mandatory	If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In an…
1.3.6.1.4.1.300.110.1.9.1.1.4	ColumnpppPortFcsSize	read-write	mandatory	The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node wil…
1.3.6.1.4.1.300.110.1.9.1.1.5	ColumnpppPortRestore	read-write	mandatory	PPP port restore mode, auto or manual.
1.3.6.1.4.1.300.110.1.9.2	NodeunitMLPPPConfig
1.3.6.1.4.1.300.110.1.9.2.1	ScalarmlPPPIpAddress	read-write	mandatory	IP Address assigned to the ML-PPP port of DL5400.
1.3.6.1.4.1.300.110.1.9.2.2	ScalarmlPPPSubnetMask	read-write	mandatory	IP Subnet mask assigned to the ML-PPP link of DL5400.
1.3.6.1.4.1.300.110.1.9.2.3	ScalarmlPPPNumberedInterface	read-write	mandatory	Numbered Interface enabled or disabled.
1.3.6.1.4.1.300.110.1.9.2.4	ScalarmlPPPMRRU	read-write	mandatory	Maximum Received Reconstructed Unit of ML-PPP.
1.3.6.1.4.1.300.110.1.9.2.5	ScalarmlPPPBundleStatus	read-only	mandatory	Tells the current bundle status
1.3.6.1.4.1.300.110.1.9.2.6	ScalarmlPPPBundleUpTime	read-only	mandatory	The time (in hundredths of a second) since the bundle is up.
1.3.6.1.4.1.300.110.1.9.2.7	ScalarmlPPPIPCPState	read-only	mandatory	The current state of IPCP.
1.3.6.1.4.1.300.110.1.9.3	TablemlPPPPortTable	not-accessible	mandatory	Table of all mlppp port in the system.
1.3.6.1.4.1.300.110.1.9.3.1	RowmlPPPPortEntry	not-accessible	mandatory	An entry in the mlppp Port Table
1.3.6.1.4.1.300.110.1.9.3.1.1	ColumnmlPPPPortIndex	read-only	mandatory	The network port index.
1.3.6.1.4.1.300.110.1.9.3.1.2	ColumnmlPPPAdmin	read-write	mandatory	Tells the MLPPP Admin State.
1.3.6.1.4.1.300.110.1.9.3.1.3	ColumnmlPPPStatus	read-only	mandatory	Tells the MLPPP Operational State.
1.3.6.1.4.1.300.110.1.9.3.1.4	ColumnmlPPPUpTime	read-only	mandatory	The time (in hundredths of a second) since the MLPPP is up.
1.3.6.1.4.1.300.110.1.9.3.1.5	ColumnmlPPPLCPState	read-only	mandatory	Tells the LCP Operational State.
1.3.6.1.4.1.300.110.1.10	NodeunitRouterConfig
1.3.6.1.4.1.300.110.1.10.1	TableunitStaticRoutingTable	not-accessible	mandatory	Table of all static routing entries in the system.
1.3.6.1.4.1.300.110.1.10.1.1	RowstaticRoutingEntry	not-accessible	mandatory	An entry in the static routing table.
1.3.6.1.4.1.300.110.1.10.1.1.1	ColumnrouteDestination	read-write	mandatory	Destination of the static route.
1.3.6.1.4.1.300.110.1.10.1.1.2	ColumnrouteNetworkMask	read-write	mandatory	Network Mask
1.3.6.1.4.1.300.110.1.10.1.1.3	ColumnrouteNextHopAddress	read-write	mandatory	Address of the next hop router. The next hop router must be on the same local network as DL5400
1.3.6.1.4.1.300.110.1.10.1.1.4	ColumnrouteMetric	read-write	mandatory	Number of hops between DL5400 and the destination.
1.3.6.1.4.1.300.110.1.10.1.1.5	ColumnrouteDirection	read-write	mandatory	Direction of the Route, Network(NUM) or WAN.
1.3.6.1.4.1.300.110.1.10.1.1.6	ColumnrouteStatus	read-write	mandatory	Writing invalid has the effect of deleting this interface.
1.3.6.1.4.1.300.110.1.11	NodeunitArpConfig
1.3.6.1.4.1.300.110.1.11.1	ScalarunitClearArpTable	read-write	mandatory	Clear all arp entries in the system.
1.3.6.1.4.1.300.110.1.11.2	TableunitArpTable	not-accessible	mandatory	Table of all arp entries in the system.
1.3.6.1.4.1.300.110.1.11.2.1	RowunitArpEntry	not-accessible	mandatory	An entry in the arp table.
1.3.6.1.4.1.300.110.1.11.2.1.1	ColumnarpEntryNum	read-only	mandatory	Entry Number in the arp table.
1.3.6.1.4.1.300.110.1.11.2.1.2	ColumnarpIPAddress	read-only	mandatory	Entry IpAddress in the arp table.
1.3.6.1.4.1.300.110.1.11.2.1.3	ColumnarpMACAddress	read-only	mandatory	Entry MAC address in the arp table.
1.3.6.1.4.1.300.110.1.11.2.1.4	ColumnarpPortNum	read-only	mandatory	Entry Port Number in the arp table.
1.3.6.1.4.1.300.110.2	Nodealarms
1.3.6.1.4.1.300.110.2	Nodedl5400ModulesDisappear			There is a module disappeared in the device.
1.3.6.1.4.1.300.110.2.1	NodeunitAlarmConfig
1.3.6.1.4.1.300.110.2.1.1	TableunitAlarmStatusTable	not-accessible	mandatory	The Unit Level alarms and status table.
1.3.6.1.4.1.300.110.2.1.1.1	RowunitAlarmStatusEntry	not-accessible	mandatory	An Entry in the unit Alarms Table.
1.3.6.1.4.1.300.110.2.1.1.1.1	ColumnunitAlarmIndex	read-only	mandatory	An index value that uniquely identifies a Unit Level alarm entry.
1.3.6.1.4.1.300.110.2.1.1.1.2	ColumnunitAlarmSeverity	read-only	mandatory	This parameter indicates the severity of the alarm, or may indicate that the data is status only.
1.3.6.1.4.1.300.110.2.1.1.1.3	ColumnunitAlarmType	read-only	mandatory	This parameter is the code for the alarm or status type. This code is used to index into an array of text strings to present a message to the human operator.
1.3.6.1.4.1.300.110.2.1.1.1.4	ColumnunitAlarmOriginCardNum	read-only	mandatory	The card type of the device originating the event.
1.3.6.1.4.1.300.110.2.1.1.1.5	ColumnunitAlarmOriginPortNum	read-only	mandatory	The port number of the device originating the event.
1.3.6.1.4.1.300.110.3	Nodeevents
1.3.6.1.4.1.300.110.3.1	TableunitEventTable	not-accessible	mandatory	The Unit Level event history table.
1.3.6.1.4.1.300.110.3.1.1	RowunitEventEntry	not-accessible	mandatory	An entry in the Unit Level event history table.
1.3.6.1.4.1.300.110.3.1.1.1	ColumnunitEventIndex	read-only	mandatory	An index that uniquely identifies a Unit Level event entry.
1.3.6.1.4.1.300.110.3.1.1.2	ColumnunitEventSeverity	read-only	mandatory	This parameter indicates whether an entry is status-only or the severity of an alarm entry.
1.3.6.1.4.1.300.110.3.1.1.3	ColumnunitEventHour	read-only	mandatory	The hour that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.4	ColumnunitEventMinute	read-only	mandatory	The minute that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.5	ColumnunitEventSecond	read-only	mandatory	The second that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.6	ColumnunitEventMonth	read-only	mandatory	The month that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.7	ColumnunitEventDay	read-only	mandatory	The day that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.8	ColumnunitEventYear	read-only	mandatory	The year that the event occurred.
1.3.6.1.4.1.300.110.3.1.1.9	ColumnunitEventOriginCardNum	read-only	mandatory	The card type of the device originating the event.
1.3.6.1.4.1.300.110.3.1.1.10	ColumnunitEventOriginPortNum	read-only	mandatory	The port number of the device originating the event.
1.3.6.1.4.1.300.110.3.1.1.11	ColumnunitEventType	read-only	mandatory	This parameter is the code for the event type. This code is used to index into an array of text strings to present a message to the human operator.
1.3.6.1.4.1.300.110.4	Nodestatistics
1.3.6.1.4.1.300.110.4.1	NodearpStats
1.3.6.1.4.1.300.110.4.1.1	ScalararpbadLengthField	read-only	mandatory	Bad Length Field
1.3.6.1.4.1.300.110.4.1.2	ScalararpunsupportedHardware	read-only	mandatory	unsupported Hardware
1.3.6.1.4.1.300.110.4.1.3	ScalararpunsupportedProtocol	read-only	mandatory	unsupported Protocol
1.3.6.1.4.1.300.110.4.1.4	ScalararpinvalidSenderAddr	read-only	mandatory	total number of packets with invalid sender protocol address
1.3.6.1.4.1.300.110.4.1.5	ScalararpinvalidTargetAddr	read-only	mandatory	total number of packets with invalid target protocol address
1.3.6.1.4.1.300.110.4.1.6	ScalararpbadAddress	read-only	mandatory	bad address
1.3.6.1.4.1.300.110.4.1.7	ScalararppktsReceived	read-only	mandatory	total number of packets recieved
1.3.6.1.4.1.300.110.4.1.8	ScalararpshortPktsReceived	read-only	mandatory	total number of short packets recieved
1.3.6.1.4.1.300.110.4.1.9	ScalararppktsFromMeReceived	read-only	mandatory	total number of packets from me received
1.3.6.1.4.1.300.110.4.1.10	ScalararpsrcBcstReceived	read-only	mandatory	total number of source broadcasts received
1.3.6.1.4.1.300.110.4.1.11	ScalararprepliedSent	read-only	mandatory	total number of replies sent
1.3.6.1.4.1.300.110.4.1.12	ScalararpincomingRequests	read-only	mandatory	total number of incoming requests
1.3.6.1.4.1.300.110.4.1.13	ScalararprequestSent	read-only	mandatory	total number of requests sent
1.3.6.1.4.1.300.110.4.1.14	ScalararpnoMACAddr	read-only	mandatory	No MAC address
1.3.6.1.4.1.300.110.4.2	TablehdlcStatsTable	not-accessible	mandatory	The hdlc statistics table.
1.3.6.1.4.1.300.110.4.2.1	RowhdlcStatsEntry	not-accessible	mandatory	An entry in the Hdlc statistics table.
1.3.6.1.4.1.300.110.4.2.1.1	ColumnhdlcPortIndex	read-only	mandatory	Port Index
1.3.6.1.4.1.300.110.4.2.1.2	ColumnhdlcLinkStatusBadFCSc	read-only	mandatory	Bad FCS
1.3.6.1.4.1.300.110.4.2.1.3	ColumnhdlcFramesAborted	read-only	mandatory	Frame aborted
1.3.6.1.4.1.300.110.4.2.1.4	ColumnhdlcFramesNotAligned	read-only	mandatory	Frame not aligned
1.3.6.1.4.1.300.110.4.2.1.5	ColumnhdlcOctetsRcv	read-only	mandatory	Octets Received
1.3.6.1.4.1.300.110.4.2.1.6	ColumnhdlcPctsRcv	read-only	mandatory	Packets Received
1.3.6.1.4.1.300.110.4.2.1.7	ColumnhdlcOctetsTrsmt	read-only	mandatory	Octets Transmitted
1.3.6.1.4.1.300.110.4.2.1.8	ColumnhdlcPctsTrsmt	read-only	mandatory	Packets Transmitted
1.3.6.1.4.1.300.110.4.3	NodemiscStats
1.3.6.1.4.1.300.110.4.3.1	ScalarmiscprotocolPctsDumped	read-only	mandatory	Rx packets with IF error on data Ethernet interface
1.3.6.1.4.1.300.110.4.3.2	ScalarmiscnonroutablePcts	read-only	mandatory	Rx packets non routable on data Ehternet interface
1.3.6.1.4.1.300.110.4.4	NodeclrStats
1.3.6.1.4.1.300.110.4.4.1	ScalarclearAllStats	read-write	mandatory	clear all statistics
1.3.6.1.4.1.300.110.4.4.2	ScalarclearCur15Min	read-write	mandatory	clear current 15 minutes statistics
1.3.6.1.4.1.300.110.4.4.3	ScalarclearCur24Hr	read-write	mandatory	clear current 24 hours statistics
1.3.6.1.4.1.300.110.4.4.4	ScalarclearOld15Min	read-write	mandatory	clear old 15 minutes statistics
1.3.6.1.4.1.300.110.4.4.5	ScalarclearOld24Hr	read-write	mandatory	clear old 24 hours statistics
1.3.6.1.4.1.300.110.5	Nodemaintenance
1.3.6.1.4.1.300.110.5.1	TablemaintModTable	not-accessible	mandatory	Table of all Module Status in the system
1.3.6.1.4.1.300.110.5.1.1	RowmaintModEntry	not-accessible	mandatory	An entry in the maintModTable
1.3.6.1.4.1.300.110.5.1.1.1	ColumnmaintModIndex	read-only	mandatory	The module index
1.3.6.1.4.1.300.110.5.1.1.2	ColumnmaintModStatus	read-only	mandatory	Module actual status
1.3.6.1.4.1.300.110.5.1.1.3	ColumnmaintOperstatus	read-only	mandatory	Module Operational status
1.3.6.1.4.1.300.110.11	Nodedl5400SelfTestFail			Self Test failed on the unit.
1.3.6.1.4.1.300.110.12	Nodedl5400RamTestFail			RAM Test failed on the unit.
1.3.6.1.4.1.300.110.13	Nodedl5400RomChecksumFail			ROM Checksum failed on the unit.
1.3.6.1.4.1.300.110.14	Nodedl5400FlashChecksumFail			Flash Checksum failed on the unit.
1.3.6.1.4.1.300.110.15	Nodedl5400TimeNotSet			The Unit's time is not set.
1.3.6.1.4.1.300.110.16	Nodedl5400UnitRestart			The Unit is resetting.
1.3.6.1.4.1.300.110.17	Nodedl5400LampTestStart			Lamp Test started.
1.3.6.1.4.1.300.110.18	Nodedl5400LampTestEnd			Lamp Test terminated.
1.3.6.1.4.1.300.110.19	Nodedl5400mgmtPOSTFail			Management POST failed.
1.3.6.1.4.1.300.110.20	Nodedl5400mgmtPOSTok			Management Port OK.
1.3.6.1.4.1.300.110.21	Nodedl5400FrontTemperatureHigh			The unit's front temperature is high.
1.3.6.1.4.1.300.110.22	Nodedl5400FrontTemperatureOK			The unit's front temperature is OK.
1.3.6.1.4.1.300.110.23	Nodedl5400BackTemperatureHigh			The unit's back temperature is high.
1.3.6.1.4.1.300.110.24	Nodedl5400BackTemperatureOK			The unit's back temperature is OK.
1.3.6.1.4.1.300.110.25	Nodedl5400ExternalMajorAlarmStart			The external major alarm input is active on the unit.
1.3.6.1.4.1.300.110.26	Nodedl5400ExternalMajorAlarmEnd			The external major alarm input is de-activated on the unit.
1.3.6.1.4.1.300.110.27	Nodedl5400ExternalMinorAlarmStart			The external minor alarm input is active on the unit.
1.3.6.1.4.1.300.110.28	Nodedl5400ExternalMinorAlarmEnd			The external minor alarm input is de-activated on the unit.
1.3.6.1.4.1.300.110.29	Nodedl5400ExternalStatusAlarmStart			The external status alarm input is active on the unit.
1.3.6.1.4.1.300.110.30	Nodedl5400ExternalStatusAlarmEnd			The external status alarm input is de-activated on the unit.
1.3.6.1.4.1.300.110.31	Nodedl5400PrimaryClockFail			Unit's primary clock has failed.
1.3.6.1.4.1.300.110.32	Nodedl5400PrimaryClockOk			Unit's primary clock is OK.
1.3.6.1.4.1.300.110.33	Nodedl5400SecondaryClockFail			Unit's Secondary clock has failed.
1.3.6.1.4.1.300.110.34	Nodedl5400SecondaryClockOk			Unit's Secondary clock is OK.
1.3.6.1.4.1.300.110.35	Nodedl5400ExternalClockFail			Unit's external clock has failed.
1.3.6.1.4.1.300.110.36	Nodedl5400ExternalClockOk			Unit's external clock is OK.
1.3.6.1.4.1.300.110.37	Nodedl5400Fan1FailAlarm			A fan 1 failed on the unit.
1.3.6.1.4.1.300.110.38	Nodedl5400Fan1Ok			A fan is ok on the unit.
1.3.6.1.4.1.300.110.39	Nodedl5400Fan2FailAlarm			A fan 2 failed on the unit.
1.3.6.1.4.1.300.110.40	Nodedl5400Fan2Ok			A fan 2 is ok on the unit.
1.3.6.1.4.1.300.110.41	Nodedl5400PSFanFailed			Power Supply Fan Failed on the unit.
1.3.6.1.4.1.300.110.42	Nodedl5400PSFanOK			Power Supply Fan OK on the unit.
1.3.6.1.4.1.300.110.43	Nodedl5400PktProcessorPostFail			Packet Processor POST Failed.
1.3.6.1.4.1.300.110.44	Nodedl5400PktProcessorPostOk			Packet Processor POST OK.
1.3.6.1.4.1.300.110.45	Nodedl5400PacketProcessorMissing			Packet Processor Missing.
1.3.6.1.4.1.300.110.46	Nodedl5400PacketProcessorOk			Packet Processor OK.
1.3.6.1.4.1.300.110.47	Nodedl5400VoltageExceeds			Voltage has exceeded allowed operating voltage range
1.3.6.1.4.1.300.110.48	Nodedl5400VoltageOk			Voltage is within allowed limits
1.3.6.1.4.1.300.110.49	Nodedl5400ModuleProcessorFail			Module Processor Failed
1.3.6.1.4.1.300.110.50	Nodedl5400ModuleProcessorOk			Module Processor OK.
1.3.6.1.4.1.300.110.51	Nodedl5400ModulesCfgMismatch			There is configuration mismatch between equipped modules.
1.3.6.1.4.1.300.110.52	Nodedl5400ModulesCfgMatch			There is no configuration mismatch between equipped modules.
1.3.6.1.4.1.300.110.53	Nodedl5400UsePriClkAlarm			Using primary clock source on the unit.
1.3.6.1.4.1.300.110.54	Nodedl5400UseSecClkAlarm			Using secondary clock source on the unit. Primary clock source failed on the unit.
1.3.6.1.4.1.300.110.55	Nodedl5400UseIntClkAlarm			Using internal clock source on the unit. Primary and secondary clock sources failed on the unit.
1.3.6.1.4.1.300.110.56	Nodedl5400UseRxClk1Alarm			Receive multiplexer synced to net 1.
1.3.6.1.4.1.300.110.57	Nodedl5400UseRxClk2Alarm			Receive multiplexer synced to net 2.
1.3.6.1.4.1.300.110.58	Nodedl5400UseRxClk3Alarm			Receive multiplexer synced to net 3.
1.3.6.1.4.1.300.110.59	Nodedl5400UseRxClk4Alarm			Receive multiplexer synced to net 4.
1.3.6.1.4.1.300.110.60	Nodedl5400UseRxClk5Alarm			Receive multiplexer synced to net 5.
1.3.6.1.4.1.300.110.61	Nodedl5400UseRxClk6Alarm			Receive multiplexer synced to net 6.
1.3.6.1.4.1.300.110.62	Nodedl5400UseRxClk7Alarm			Receive multiplexer synced to net 7.
1.3.6.1.4.1.300.110.63	Nodedl5400UseRxClk8Alarm			Receive multiplexer synced to net 8.
1.3.6.1.4.1.300.110.64	Nodedl5400MLpppPOSTFail			ML-PPP POST failed.
1.3.6.1.4.1.300.110.65	Nodedl5400MLpppPOSTok			ML-PPP Port OK.
1.3.6.1.4.1.300.110.66	Nodedl5400MLpppModuleMissing			ML-PPP Module is Missing
1.3.6.1.4.1.300.110.67	Nodedl5400MLpppModuleOK			ML-PPP Module is OK
1.3.6.1.4.1.300.110.68	Nodedl5400MLpppInsufficientLinks			ML-PPP Insufficient links reported.
1.3.6.1.4.1.300.110.69	Nodedl5400MLpppInsufficientLinksOk			Insufficient ML-PPP links alarm remitted.
1.3.6.1.4.1.300.110.70	Nodedl5400ModulesFail			There is a module failed in the device.
1.3.6.1.4.1.300.110.71	Nodedl5400ModulesUp			There is a module up in the device.
1.3.6.1.4.1.300.110.100	Nodedl5400LossOfSignalStart			Loss of Signal occured on the specified Network port.
1.3.6.1.4.1.300.110.101	Nodedl5400LossOfSignalEnd			Loss of Signal ended on the specified Network port.
1.3.6.1.4.1.300.110.102	Nodedl5400LossOfFrameStart			Loss of Frame ended on the specified Network port.
1.3.6.1.4.1.300.110.103	Nodedl5400LossOfFrameEnd			Loss of Frame ended on the specified Network port.
1.3.6.1.4.1.300.110.104	Nodedl5400AisStart			AIS Alarm started on the specified Network port.
1.3.6.1.4.1.300.110.105	Nodedl5400AisEnd			AIS Alarm started on the specified Network port.
1.3.6.1.4.1.300.110.106	Nodedl5400RaiStart			RAI Alarm(Yellow) received on the specified Network port.
1.3.6.1.4.1.300.110.107	Nodedl5400RaiEnd			RAI Alarm(Yellow) Ended on the specified Network port.
1.3.6.1.4.1.300.110.158	Nodedl5400netLineRemoteLoopbackStart			Network Line/Remote Loopback on specified Network port .
1.3.6.1.4.1.300.110.159	Nodedl5400netLineRemoteLoopbackEnd			Network Line/Remote Loopback ended on specified Network port .
1.3.6.1.4.1.300.110.164	Nodedl5400pppEchoTimeout			PPP Echo Timeout.
1.3.6.1.4.1.300.110.165	Nodedl5400pppEchoTimeoutRemit			PPP Echo Timeout Alarm Remitted.
1.3.6.1.4.1.300.110.166	Nodedl5400pppLineLoopbackStart			PPP Line Loopback Start.
1.3.6.1.4.1.300.110.167	Nodedl5400pppLineLoopbackEnd			PPP Line Loopback End.
1.3.6.1.4.1.300.110.168	Nodedl5400pppLinkFallbackStart			PPP Link FallbackStart.
1.3.6.1.4.1.300.110.169	Nodedl5400pppLinkFallbackEnd			PPP Link Fallback End.
1.3.6.1.4.1.300.110.170	Nodedl5400dteLocalLoopbackStart			Network DTE Local Loopback on specified Network port .
1.3.6.1.4.1.300.110.171	Nodedl5400dteLocalLoopbackEnd			Network DTE Local Loopback ended on specified Network port .
1.3.6.1.4.1.300.110.172	Nodedl5400dteRemoteLoopbackStart			Network DTE Remote Loopback on specified Network port .
1.3.6.1.4.1.300.110.173	Nodedl5400dteRemoteLoopbackEnd			Network DTE Remote Loopback ended on specified Network port .
1.3.6.1.4.1.300.110.174	Nodedl5400MLpppLinkDown			ML-PPP links down caused by ML-PPP Protocol Layer.
1.3.6.1.4.1.300.110.175	Nodedl5400MLpppLinkUp			ML-PPP links up caused by ML-PPP Protocol Layer.

Type Definitions

Name	Syntax	Status	Description
DisplayString	OCTET STRING
DL5400CardId	INTEGER { mpm (1), pp (2), enet (3), ds1 (4) }
DL5400commBaudRate	INTEGER { bps1200 (1), bps2400 (2), bps4800 (3), bps9600 (4), bps19200 (5), bps38400 (6), bps57600 (7), bps115200 (8) }
DL5400commFlowControl	INTEGER { xoffUntilXon (1), xoffUntilAny (2), hwFlowControl (3), none (4) }
DL5400commNumDataBits	INTEGER { seven (7), eight (8) }
DL5400commParity	INTEGER { even (1), odd (2), none (3) }
DL5400commStopBits	INTEGER { one (1), oneAndHalf (2), two (3) }
DL5400Event	INTEGER { ev-mod-appear (1) , ev-mod-disappear (2) , ev-system-reset (3) , ev-system-initialized (4) , ev-timeofday-changed (5) , ev-admin-isnr (6) , ev-admin-oos (7) , ev-admin-oosmt (8) , ev-cuisession-inactivitytimeout (9) , ev-clkref-configchanged (10) , ev-selftest-fail(11) , ev-ram-test-fail(12) , ev-rom-checksum-fail(13) , ev-flash-checksum-fail(14) , ev-time-not-set(15) , ev-unit-restart(16) , ev-lamptest-start(17) , ev-lamptest-end(18) , ev-mgmt-post-fail(19) , ev-mgmt-post-fail-remit(20) , ev-front-high-temperature(21) , ev-front-high-temperature-remit(22) , ev-back-high-temperature(23) , ev-back-high-temperature-remit(24) , ev-external-major-alarm-input(25) , ev-external-major-alarm-input-end(26) , ev-external-minor-alarm-input(27) , ev-external-minor-alarm-input-end(28) , ev-external-status-alarm-input(29) , ev-external-status-alarm-input-end(30) , ev-primary-clk-fail(31) , ev-primary-clk-ok(32) , ev-secondary-clk-fail(33) , ev-secondary-clk-ok(34) , ev-ext-clk-fail(35) , ev-ext-clk-ok(36) , ev-fan1-fail(37) , ev-fan1-ok(38) , ev-fan2-fail(39) , ev-fan2-ok(40) , ev-ps-fan-fail(41) , ev-ps-fan-ok(42) , ev-packet-processor-post-fail(43) , ev-packet-processor-post-ok(44) , ev-packet-processor-missing(45) , ev-packet-processor-ok(46) , ev-voltage-exceeds(47) , ev-voltage-ok(48) , ev-module-processor-fail(49) , ev-module-processor-ok(50) , ev-mod-cfg-mismatch (51) , ev-mod-cfg-match (52) , ev-use-primary-clk(53) , ev-use-secondary-clk(54) , ev-use-internal-clk(55) , ev-use-rx-clk1(56) , ev-use-rx-clk2(57) , ev-use-rx-clk3(58) , ev-use-rx-clk4(59) , ev-use-rx-clk5(60) , ev-use-rx-clk6(61) , ev-use-rx-clk7(62) , ev-use-rx-clk8(63) , ev-mlppp-post-fail(64) , ev-mlppp-post-fail-remit(65) , ev-mlppp-module-missing(66) , ev-mlppp-module-ok(67) , ev-mlppp-insufficient-links(68) , ev-mlppp-insufficient-links-remit(69) , ev-mod-fail (70) , ev-mod-up (71) , ev-mod-no-resp (72) , ev-mod-hello (73) , ev-mod-init-fail (74) , ev-mod-init-ok (75) , ev-mod-some-ports-failed (76) , ev-mod-some-ports-ok (77) , ev-mod-all-ports-failed (78) , ev-mod-all-ports-ok (79) , ev-lost-signal(100) , ev-lost-signal-remit(101) , ev-lof(102) , ev-lof-remit(103) , ev-ais(104) , ev-ais-remit(105) , ev-rai(106) , ev-rai-remit(107) , ev-red-alarm(108) , ev-red-alarm-remit(109) , ev-exceeded-cv-consec-sec(110) , ev-exceeded-cv-consec-sec-remit(111) , ev-exceeded-ses-consec-sec(112) , ev-exceeded-ses-consec-sec-remit(113) , ev-exceeded-uas-consec-sec(114) , ev-exceeded-uas-consec-sec-remit(115) , ev-exceeded-pcv-15min-minor-threshold(116) , ev-exceeded-pcv-15min-minor-threshold-remit(117) , ev-exceeded-pcv-15min-major-threshold(118) , ev-exceeded-pcv-15min-major-threshold-remit(119) , ev-exceeded-es-15min-minor-threshold(120) , ev-exceeded-es-15min-minor-threshold-remit(121) , ev-exceeded-es-15min-major-threshold(122) , ev-exceeded-es-15min-major-threshold-remit(123) , ev-exceeded-ses-15min-minor-threshold(124) , ev-exceeded-ses-15min-minor-threshold-remit(125) , ev-exceeded-ses-15min-major-threshold(126) , ev-exceeded-ses-15min-major-threshold-remit(127) , ev-exceeded-sas-15min-minor-threshold(128) , ev-exceeded-sas-15min-minor-threshold-remit(129) , ev-exceeded-sas-15min-major-threshold(130) , ev-exceeded-sas-15min-major-threshold-remit(131) , ev-exceeded-uas-15min-minor-threshold(132) , ev-exceeded-uas-15min-minor-threshold-remit(133) , ev-exceeded-uas-15min-major-threshold(134) , ev-exceeded-uas-15min-major-threshold-remit(135) , ev-exceeded-pcv-24hr-minor-threshold(136) , ev-exceeded-pcv-24hr-minor-threshold-remit(137) , ev-exceeded-pcv-24hr-major-threshold(138) , ev-exceeded-pcv-24hr-major-threshold-remit(139) , ev-exceeded-es-24hr-minor-threshold(140) , ev-exceeded-es-24hr-minor-threshold-remit(141) , ev-exceeded-es-24hr-major-threshold(142) , ev-exceeded-es-24hr-major-threshold-remit(143) , ev-exceeded-ses-24hr-minor-threshold(144) , ev-exceeded-ses-24hr-minor-threshold-remit(145) , ev-exceeded-ses-24hr-major-threshold(146) , ev-exceeded-ses-24hr-major-threshold-remit(147) , ev-exceeded-sas-24hr-minor-threshold(148) , ev-exceeded-sas-24hr-minor-threshold-remit(149) , ev-exceeded-sas-24hr-major-threshold(150) , ev-exceeded-sas-24hr-major-threshold-remit(151) , ev-exceeded-uas-24hr-minor-threshold(152) , ev-exceeded-uas-24hr-minor-threshold-remit(153) , ev-exceeded-uas-24hr-major-threshold(154) , ev-exceeded-uas-24hr-major-threshold-remit(155) , ev-net-local-loopback-start(156) , ev-net-local-loopback-end(157) , ev-net-remote-loopback-start(158) , ev-net-remote-loopback-end(159) , ev-net-payload-loopback-start(160) , ev-net-payload-loopback-end(161) , ev-net-BERT-start(162) , ev-net-BERT-end(163) , ev-ppp-echo-timeout(164) , ev-ppp-echo-timeout-remit(165) , ev-ppp-loopback-line(166) , ev-ppp-loopback-line-remit(167) , ev-ppp-link-fallback(168) , ev-ppp-link-fallback-remit(169) , ev-dte-local-loopback-start(170) , ev-dte-local-loopback-end(171) , ev-dte-remote-loopback-start(172) , ev-dte-remote-loopback-end(173) , ev-mlppp-link-down(174) , ev-mlppp-link-up(175) }
DL5400PortId	INTEGER { dte (1), nmsEthernet (2), comm1 (3), comm2 (4), net1 (5), net2 (6), net3 (7), net4 (8), net5 (9), net6 (10), net7 (11), net8 (12) }
DL5400TxClkSrc	INTEGER { internalClock (1), externalClock (2), rcvrdTiming (3), autoTiming (4) }
DL5400Validation	INTEGER { valid (1), invalid (2) }
TODDay	INTEGER (1..31)
TODHour	INTEGER (0..23)
TODMinute	INTEGER (0..59)
TODMonth	INTEGER (1..12)
TODSecond	INTEGER (0..59)
TODYear	INTEGER (0..9999)

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

DL5400-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps