DLGSRPRF-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3028.1.2.1 | NodedlgPiSram | |||
| 1.3.6.1.4.1.3028.1.2.1.1 | ScalardlgPsStatsEnableMask | read-write | mandatory | Statistics Collection Enable mask. This mask enables or disables all statistics defined in this MIB. 0 - Disables statistics collection. 1 - Enables statistics… |
| 1.3.6.1.4.1.3028.1.2.1.2 | ScalardlgPsPollingInterval | read-write | mandatory | The Agent's polling interval in seconds. This is the length of time that the Agent will keeps stats within the Current Stats group. By default, this value is 3… |
| 1.3.6.1.4.1.3028.1.2.1.3 | ScalardlgPsElapsedTime | read-only | mandatory | Number of Elapsed seconds since the start of the current polling interval. |
| 1.3.6.1.4.1.3028.1.2.1.4 | NodedlgPsCurrentStats | |||
| 1.3.6.1.4.1.3028.1.2.1.4.1 | ScalardlgPsCurrentInterrupts | read-only | mandatory | Number of hardware interrupts generated by Span or D4x based boards for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.2 | ScalardlgPsCurrentDrvCommands | read-only | mandatory | Number of commands sent to the driver for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.3 | ScalardlgPsCurrentFWCommands | read-only | mandatory | Number of commands sent to the Firmware for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.4 | ScalardlgPsCurrentUnSolEvents | read-only | mandatory | Number of unsolicited events from the Firmware for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.5 | ScalardlgPsCurrentBytesRead | read-only | mandatory | Number of bytes read from the Firmware during record for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.6 | ScalardlgPsCurrentBytesWritten | read-only | mandatory | Number of bytes written to the Firmware during playback for the current interval. |
| 1.3.6.1.4.1.3028.1.2.1.4.7 | ScalardlgPsCurrentLostMsgToFW | read-only | mandatory | Number of lost messages (commands) to the Firmware for the current interval. This value should always be zero. A non zero value typically indicates a Firmware … |
| 1.3.6.1.4.1.3028.1.2.1.4.8 | ScalardlgPsCurrentLostMsgFromFW | read-only | mandatory | Number of lost messages (events) from the Firmware for the current interval. This value should typically be zero. A non zero value indicates the host cannot se… |
| 1.3.6.1.4.1.3028.1.2.1.4.9 | ScalardlgPsCurrentFWErrorMsgs | read-only | mandatory | Number of error message packets generated by the Firmware for the current interval. This should typically be zero. |
| 1.3.6.1.4.1.3028.1.2.1.4.10 | ScalardlgPsCurrentDrvErrorMsgs | read-only | mandatory | Number of error message packets generated by the Driver for the current interval. This should tpyically be zero. |
| 1.3.6.1.4.1.3028.1.2.1.5 | NodedlgPsTotalStats | |||
| 1.3.6.1.4.1.3028.1.2.1.5.1 | ScalardlgPsTotalInterrupts | read-only | mandatory | Total Number of hardware interrupts generated by the Span or D4x based boards. |
| 1.3.6.1.4.1.3028.1.2.1.5.2 | ScalardlgPsTotalDrvCommands | read-only | mandatory | Total Number of commands sent to the driver. |
| 1.3.6.1.4.1.3028.1.2.1.5.3 | ScalardlgPsTotalFWCommands | read-only | mandatory | Total Number of commands sent to the Firmware. |
| 1.3.6.1.4.1.3028.1.2.1.5.4 | ScalardlgPsTotalUnSolEvents | read-only | mandatory | Total Number of unsolicited events from the Firmware. |
| 1.3.6.1.4.1.3028.1.2.1.5.5 | ScalardlgPsTotalBytesRead | read-only | mandatory | Total Number of bytes Read from the Firmware during record. |
| 1.3.6.1.4.1.3028.1.2.1.5.6 | ScalardlgPsTotalBytesWritten | read-only | mandatory | Total Number of bytes written to the Firmware during playback. |
| 1.3.6.1.4.1.3028.1.2.1.5.7 | ScalardlgPsTotalLostMsgToFW | read-only | mandatory | Total Number of lost messages (commands) to the Firmware. This value should always be zero. A non zero value typically indicates a Firmware or Hardware failure. |
| 1.3.6.1.4.1.3028.1.2.1.5.8 | ScalardlgPsTotalLostMsgFromFW | read-only | mandatory | Total Number of lost messages (events) from the Firmware. This value should typically be zero. A non zero value indicates the host cannot service all the messa… |
| 1.3.6.1.4.1.3028.1.2.1.5.9 | ScalardlgPsTotalFWErrorMsgs | read-only | mandatory | Total Number of error message packets gernerated by the Firmware. This should typically be zero. |
| 1.3.6.1.4.1.3028.1.2.1.5.10 | ScalardlgPsTotalDrvErrorMsgs | read-only | mandatory | Total Number of error message packets generated by the Driver. This should typically be zero. |
| 1.3.6.1.4.1.3028.1.2.1.6 | NodedlgPiSramMibRev | |||
| 1.3.6.1.4.1.3028.1.2.1.6.1 | ScalardlgPiSramMibRevMajor | read-only | mandatory | The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m… |
| 1.3.6.1.4.1.3028.1.2.1.6.2 | ScalardlgPiSramMibRevMinor | read-only | mandatory | The Minor Revision level. A change in the minor revision level may represent some minor additional support. no changes to any pre-existing information has occu… |