DOS-PREV-MIB
22 objects
The MIB module for configuring the DoS prevention settings of the device.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.59 | IdentityswDoSMgmtMIB | The MIB module for configuring the DoS prevention settings of the device. | ||
| 1.3.6.1.4.1.171.12.59.1 | NodeswDoSCtrl | |||
| 1.3.6.1.4.1.171.12.59.1.1 | ScalarswDoSTrapLog | read-write | current | This object indicates the status of the DoS prevention trap log. |
| 1.3.6.1.4.1.171.12.59.1.2 | ScalarswDoSClearCounters | read-write | current | This object clears the DoS prevention frame counters. |
| 1.3.6.1.4.1.171.12.59.1.3 | TableswDoSCtrlTable | not-accessible | current | A table that holds the DoS prevention settings of the device. |
| 1.3.6.1.4.1.171.12.59.1.3.1 | RowswDoSCtrlEntry | not-accessible | current | A list of DoS prevention settings of the device. |
| 1.3.6.1.4.1.171.12.59.1.3.1.1 | ColumnswDoSCtrlType | read-only | current | This object indicates the DoS prevention type. |
| 1.3.6.1.4.1.171.12.59.1.3.1.2 | ColumnswDoSCtrlState | read-write | current | This object indicates the status of the DoS prevention type. |
| 1.3.6.1.4.1.171.12.59.1.3.1.3 | ColumnswDoSCtrlActionType | read-write | current | This object indicates the action for the DoS prevention type. If this object is set to 'mirror' and swDoSCtrlState is set to 'enable', the configuration will n… |
| 1.3.6.1.4.1.171.12.59.1.3.1.4 | ColumnswDoSCtrlMirrorPort | read-write | current | This object indicates the port to which the attack packet will be forwarded. A value of 0 means that the DoS prevention action type is either not set to 'mirro… |
| 1.3.6.1.4.1.171.12.59.1.3.1.5 | ColumnswDoSCtrlMirrorPriority | read-write | current | This object configures the priority of the detected packet. Valid priority values are from 0 to 7. The value 8 indicates that there will be no change in the pr… |
| 1.3.6.1.4.1.171.12.59.1.3.1.6 | ColumnswDoSCtrlMirrorRxRate | read-write | current | This object indicates the rate of reception of DoS attack packets. The valid values are 64 to 1024000. A value of 0 indicates that the rate has no limit. The d… |
| 1.3.6.1.4.1.171.12.59.1.3.1.7 | ColumnswDoSCtrlFrameCount | read-only | current | This object indicates the number of frames detected under the DoS prevention type. A valid mirror port must first be specified in order to set this value. |
| 1.3.6.1.4.1.171.12.59.1.4 | ScalarswDoSTrapState | read-write | current | This object indicates the status of the DoS prevention trap. |
| 1.3.6.1.4.1.171.12.59.1.5 | ScalarswDoSLogState | read-write | current | This object indicates the status of the DoS prevention log. |
| 1.3.6.1.4.1.171.12.59.1.6 | ScalarswDoSFunctionVersion | read-only | current | This object indicates the function version. |
| 1.3.6.1.4.1.171.12.59.4 | NodeswDoSNotify | |||
| 1.3.6.1.4.1.171.12.59.4.0 | NodeswDoSNotifyPrefix | |||
| 1.3.6.1.4.1.171.12.59.4.0.1 | NotificationswDoSAttackDetected | current | This trap is sent when the specific DoS packet is received and trap is enabled. | |
| 1.3.6.1.4.1.171.12.59.4.1 | NodeswDoSNotifyVarBindings | |||
| 1.3.6.1.4.1.171.12.59.4.1.1 | ScalarswDoSNotifyVarIpAddr | accessible-for-notify | current | If the DoS packet is from the end station, represent the IP address of attacker; otherwise represent the router's IP |
| 1.3.6.1.4.1.171.12.59.4.1.2 | ScalarswDoSNotifyVarPortNumber | accessible-for-notify | current | This object indicates the attacked portNum with a string, For example, if the device is in standalone mode, and the port number is 23, the string should be 23.… |