MIB Viewer

DRAGONWAVE-HCP-MIB

781 objects
This specifies the contact information and the revision tracking information for the MIB module version.
Imported Objects
HORIZON-EQUIPMENT-LOG-MIBhorizonEquipmentOutTrapsCounter
HORIZON-MIBhorizon
INET-ADDRESS-MIBInetAddress InetAddressPrefixLength InetAddressType
RFC1213-MIBifIndex
SNMPv2-SMICounter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.7262.2.5NodehorizonCompactPlus
1.3.6.1.4.1.7262.2.5.1NodehzCpSystem
1.3.6.1.4.1.7262.2.5.1.1NodehzCpSysGeneral
1.3.6.1.4.1.7262.2.5.1.1.1ScalarhzCpResetSystemread-writecurrentWriting '1' to this object resets the system.
1.3.6.1.4.1.7262.2.5.1.1.2ScalarhzCpSaveMIBread-writecurrentWriting '1' or 'save' to this object save all MIB values.
1.3.6.1.4.1.7262.2.5.1.1.3ScalarhzCpOperStatusread-onlycurrentThe current operational state of the system. Testing indicates that no operational packets can be passed.
1.3.6.1.4.1.7262.2.5.1.2NodehzCpSysSpeed
1.3.6.1.4.1.7262.2.5.1.2.1ScalarhzCpSystemCurrentSpeedread-writecurrentChanges the working speed of the system.
1.3.6.1.4.1.7262.2.5.1.2.2ScalarhzCpSystemLicensedSpeedread-onlycurrentIndicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.
1.3.6.1.4.1.7262.2.5.1.2.3NodehzCpSysUpgradeSpeed
1.3.6.1.4.1.7262.2.5.1.2.3.1ScalarhzCpLicensedSpeedUpgradeSpeedAndKeyread-writecurrentEnter your key here along with the maximum speed for that key to upgrade the system speed. Format: [speed] [key] Example: 800 abc123
1.3.6.1.4.1.7262.2.5.1.2.3.2ScalarhzCpLicensedSpeedCountread-onlycurrentThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.
1.3.6.1.4.1.7262.2.5.1.2.4NodehzCpSysDowngradeSpeed
1.3.6.1.4.1.7262.2.5.1.2.4.1ScalarhzCpLicensedSpeedDowngradeSpeedread-writecurrentReduce your licensed speed by entering a speed to this object and take note of the generated key in hzCpLicensedSpeedConfirmationKey. Format: [speed] Example: …
1.3.6.1.4.1.7262.2.5.1.2.4.2ScalarhzCpLicensedSpeedCountUsedForKeyread-onlycurrentThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.
1.3.6.1.4.1.7262.2.5.1.2.4.3ScalarhzCpLicensedSpeedConfirmationKeyread-onlycurrentThis read-only object will show a 'key' after successfully downgrading the license speed.
1.3.6.1.4.1.7262.2.5.1.2.4.4ScalarhzCpSysDowngradeSpeedDecrementread-onlycurrentThis object indicates the difference for the dropped speed.
1.3.6.1.4.1.7262.2.5.1.3NodehzCpInventory
1.3.6.1.4.1.7262.2.5.1.3.1NodehzCpHwInventory
1.3.6.1.4.1.7262.2.5.1.3.1.1ScalarhzCpFrequencyFilePartNumberread-onlycurrentA textual string containing Part Number of the Frequency File
1.3.6.1.4.1.7262.2.5.1.3.1.2ScalarhzCpUnitSerialNoread-onlycurrentA textual string containing Serial Number of the Unit.
1.3.6.1.4.1.7262.2.5.1.3.1.3ScalarhzCpUnitAssemblyNoread-onlycurrentA textual string containing the Assembly Number of the Unit.
1.3.6.1.4.1.7262.2.5.1.3.1.4ScalarhzCpModemSerialNoread-onlycurrentA textual string containing Serial no of the Modem.
1.3.6.1.4.1.7262.2.5.1.3.1.5ScalarhzCpModemAssemblyNoread-onlycurrentA textual string containing assembly no of the Modem.
1.3.6.1.4.1.7262.2.5.1.3.1.6ScalarhzCpPsuSerialNoread-onlycurrentA textual string containing Serial no of the PSU.
1.3.6.1.4.1.7262.2.5.1.3.1.7ScalarhzCpPsuAssemblyNoread-onlycurrentA textual string containing assembly no of the PSU.
1.3.6.1.4.1.7262.2.5.1.3.1.8ScalarhzCpRfSerialNoread-onlycurrentA textual string containing Serial no of the RF.
1.3.6.1.4.1.7262.2.5.1.3.1.9ScalarhzCpRfAssemblyNoread-onlycurrentA textual string containing assembly no of the RF.
1.3.6.1.4.1.7262.2.5.1.3.1.10ScalarhzCpDiplexerSerialNoread-onlycurrentA textual string containing Serial no of the Diplexer.
1.3.6.1.4.1.7262.2.5.1.3.1.11ScalarhzCpDiplexerAssemblyNoread-onlycurrentA textual string containing assembly no of the Diplexer.
1.3.6.1.4.1.7262.2.5.1.3.1.12ScalarhzCpSystemCleiNoread-onlycurrentA textual string containing system CLEI code.
1.3.6.1.4.1.7262.2.5.1.3.2NodehzCpSwInventory
1.3.6.1.4.1.7262.2.5.1.3.2.1TablehzCpSwInventoryTablenot-accessiblecurrentTable contains the software inventory.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1RowhzCpSwInventoryEntrynot-accessiblecurrentSoftware inventory entry.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.1ColumnhzCpSwInvBankread-onlycurrentSoftware bank in the flash.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.2ColumnhzCpSwInvStatusread-onlycurrentSoftware bank status.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.3ColumnhzCpSwInvOmniReleaseread-onlycurrentThe version number of the Omni.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.4ColumnhzCpSwInvFrequencyFileVersionread-onlycurrentThe version number of the frequency file.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.5ColumnhzCpSwInvMibVersionread-onlycurrentThe version number of the system MIB.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.6ColumnhzCpSwInvBootloaderVersionread-onlycurrentThe version number of the bootloader.
1.3.6.1.4.1.7262.2.5.1.4NodehzCpPeerSysInfo
1.3.6.1.4.1.7262.2.5.1.4.1ScalarhzCpPeerMacAddressread-onlycurrentThe MAC Address of the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.2ScalarhzCpPeerIpAddressread-onlycurrentThe IP Address of the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.3ScalarhzCpPeerSubnetMaskread-onlycurrentThe subnet mask for the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.4ScalarhzCpPeerDefaultGatewayread-onlycurrentThe default gateway address of the peer node.
1.3.6.1.4.1.7262.2.5.1.4.5ScalarhzCpPeerIpv6Prefixread-onlycurrentThe peer IPv6 prefix.
1.3.6.1.4.1.7262.2.5.1.4.6ScalarhzCpPeerIpv6Domainread-onlycurrentThe peer IPv6 domain.
1.3.6.1.4.1.7262.2.5.1.4.7ScalarhzCpPeerIpv6Addressread-onlycurrentThe peer IPv6 address.
1.3.6.1.4.1.7262.2.5.1.4.8ScalarhzCpPeerIpv6GatewayDomainread-onlycurrentThe peer IPv6 gateway domain.
1.3.6.1.4.1.7262.2.5.1.4.9ScalarhzCpPeerIpv6GatewayAddressread-onlycurrentThe peer IPv6 gateway address.
1.3.6.1.4.1.7262.2.5.1.5NodehzCpSysRedundancy
1.3.6.1.4.1.7262.2.5.1.5.1ScalarhzCpRedundancyModeread-writecurrentallows the user to set system redundancy mode: [ off | primary-hsb | secondary-hsb | primary-x2 | secondary-x2 ]
1.3.6.1.4.1.7262.2.5.1.5.2ScalarhzCpRedundancySwitchModeread-writecurrentAllows the user to override the active link. User can force the link to stay on either force-active, force-standby, auto or manual.
1.3.6.1.4.1.7262.2.5.1.5.3ScalarhzCpRedundancyStandbyEnetStateread-writecurrentAllows the user to set standby payload port state.
1.3.6.1.4.1.7262.2.5.1.5.4ScalarhzCpRedundancyStateSwitchread-writecurrentAllows the user to switch redundancy state.
1.3.6.1.4.1.7262.2.5.1.5.5ScalarhzCpRedundancyMgmtSourceread-writecurrentWhen set to local-node, each node is managed locally through specified management interface. When set to standby-node, the management traffic for the partner i…
1.3.6.1.4.1.7262.2.5.1.5.6NodehzCpRedundancyLinkSwitchParameters
1.3.6.1.4.1.7262.2.5.1.5.6.1ScalarhzCpRedundancyPrimaryTimeInActiveStateread-writecurrentTime, in miliseconds, given to the primary unit to establish a link once it becomes active.
1.3.6.1.4.1.7262.2.5.1.5.6.2ScalarhzCpRedundancyPrimarySwitchErrorThresholdread-writecurrentThe percent of allowed bad blocks, on the primary unit, needed to establish a link.
1.3.6.1.4.1.7262.2.5.1.5.6.3ScalarhzCpRedundancySecondaryTimeInActiveStateread-writecurrentTime, in miliseconds, given to the secondary unit to establish a link once it becomes active.
1.3.6.1.4.1.7262.2.5.1.5.6.4ScalarhzCpRedundancySecondarySwitchErrorThresholdread-writecurrentThe percent of allowed bad blocks, on the secondary unit, needed to establish a link.
1.3.6.1.4.1.7262.2.5.1.5.7NodehzCpRedundancyLinkMonitorParameters
1.3.6.1.4.1.7262.2.5.1.5.7.1ScalarhzCpRedundancyFaultPeriodread-writecurrentThe period of time, in milliseconds, for which the Fault Threshold is applied.
1.3.6.1.4.1.7262.2.5.1.5.7.2ScalarhzCpRedundancyFaultThresholdread-writecurrentThe maximum percentage of the bad blocks allowed in specified Fault Sample Period to maintain link when in active state.
1.3.6.1.4.1.7262.2.5.1.5.8NodehzCpPartnerSysInfo
1.3.6.1.4.1.7262.2.5.1.5.8.1ScalarhzCpPartnerMacAddressread-onlycurrentThe MAC Address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.2ScalarhzCpPartnerIpAddressread-onlycurrentThe IP Address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.3ScalarhzCpPartnerSubnetMaskread-onlycurrentThe subnet mask for the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.4ScalarhzCpPartnerDefaultGatewayread-onlycurrentThe default gateway address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.5ScalarhzCpPartnerIpv6Prefixread-onlycurrentThe IPv6 prefix of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.6ScalarhzCpPartnerIpv6Domainread-onlycurrentThe IPv6 domain of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.7ScalarhzCpPartnerIpv6Addressread-onlycurrentThe IPv6 address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.8ScalarhzCpPartnerIpv6GatewayDomainread-onlycurrentThe IPv6 gateway domain of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.9ScalarhzCpPartnerIpv6GatewayAddressread-onlycurrentThe IPv6 gateway address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.9NodehzCpPeerPartnerSysInfo
1.3.6.1.4.1.7262.2.5.1.5.9.1ScalarhzCpPeerPartnerMacAddressread-onlycurrentThe MAC Address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.2ScalarhzCpPeerPartnerIpAddressread-onlycurrentThe IP Address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.3ScalarhzCpPeerPartnerSubnetMaskread-onlycurrentThe subnet mask for the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.4ScalarhzCpPeerPartnerDefaultGatewayread-onlycurrentThe default gateway address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.5ScalarhzCpPeerPartnerIpv6Prefixread-onlycurrentThe IPv6 prefix of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.6ScalarhzCpPeerPartnerIpv6Domainread-onlycurrentThe IPv6 domain of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.7ScalarhzCpPeerPartnerIpv6Addressread-onlycurrentThe IPv6 address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.8ScalarhzCpPeerPartnerIpv6GatewayDomainread-onlycurrentThe IPv6 gateway domain of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.9ScalarhzCpPeerPartnerIpv6GatewayAddressread-onlycurrentThe IPv6 gateway address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.10NodehzCpPartnerCommunication
1.3.6.1.4.1.7262.2.5.1.5.10.1ScalarhzCpPartnerAutoDiscoveryread-writecurrentDisables or enables the partner's auto discovery.
1.3.6.1.4.1.7262.2.5.1.5.10.2ScalarhzCpPartnerMacAddressOverrideread-writecurrentThe MAC Address for partner to be used when the auto discovery is disabled.
1.3.6.1.4.1.7262.2.5.1.5.10.3ScalarhzCpPartnerVlanTaggingread-writecurrentDisables or enables the VLAN tagging for partner's communication. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify…
1.3.6.1.4.1.7262.2.5.1.5.10.4ScalarhzCpPartnerVlanTagIdread-writecurrentIndicates the VLAN Tag Id (1...4095) for partner's communication.
1.3.6.1.4.1.7262.2.5.1.5.10.5ScalarhzCpPartnerVlanTagPriorityread-writecurrentThe priority for VLAN tagging (0...7) for partner's communication.
1.3.6.1.4.1.7262.2.5.1.5.11NodehzCpRedundancyStatus
1.3.6.1.4.1.7262.2.5.1.5.11.1ScalarhzCpRedundancyUserTrafficStatusread-onlycurrentIndicates the redundancy user traffic status.
1.3.6.1.4.1.7262.2.5.1.5.11.2ScalarhzCpRedundancyWirelessLinkStatusread-onlycurrentIndicates the redundancy wireless link status.
1.3.6.1.4.1.7262.2.5.1.5.11.3ScalarhzCpRedundancyEnetCrossLinkStatusread-onlycurrentIndicates the redundancy ethernet cross link status. Primary node is active and processing user traffic at one end of the link, and secondary node is active at…
1.3.6.1.4.1.7262.2.5.1.5.11.4ScalarhzCpRedundancyPortGroupStatusread-onlycurrentIndicates the redundancy port group status.
1.3.6.1.4.1.7262.2.5.1.6NodehzCpSysDiagnostics
1.3.6.1.4.1.7262.2.5.1.6.1NodehzCpLoopback
1.3.6.1.4.1.7262.2.5.1.6.1.1ScalarhzCpLoopbackTyperead-writecurrentWhat the user sets is cached until the loopback is started. The get returns the running status of the active loopback type.
1.3.6.1.4.1.7262.2.5.1.6.1.2ScalarhzCpLoopbackTimeoutread-writecurrentThe loopback timeout period.
1.3.6.1.4.1.7262.2.5.1.6.1.3ScalarhzCpLoopbackNetworkMacread-writecurrentThe MAC address used for network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.4ScalarhzCpLoopbackNetworkQueueread-writecurrentThe user queue used for far-end network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.5ScalarhzCpLoopbackNetworkPortread-writecurrentThe user enet port used for network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.6ScalarhzCpLoopbackStartread-writecurrentStart the loopback by writing '1' to this object.
1.3.6.1.4.1.7262.2.5.1.6.1.7ScalarhzCpLoopbackStopread-writecurrentStop the loopback by writing '1' to this object.
1.3.6.1.4.1.7262.2.5.1.6.2NodehzCpHitlessAamDiagnostics
1.3.6.1.4.1.7262.2.5.1.6.2.1TablehzCpHitlessAamModemTablenot-accessiblecurrentA table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.1.6.2.1.1RowhzCpHitlessAamModemEntrynot-accessiblecurrentA Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.1ColumnhzCpHitlessAamModemIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.2ColumnhzCpHitlessAamModemDiagnoseread-writecurrentThis service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem. Poll…
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.3ColumnhzCpHitlessAamModemDiagnosticResultread-onlycurrentThe result from Hitless AAM Diagnostic is read from this object.
1.3.6.1.4.1.7262.2.5.1.6.3ScalarhzCpCodeCheckCountread-onlycurrentA counter representing the number of queue-freezup error correction that has encountered in the system.
1.3.6.1.4.1.7262.2.5.1.7NodehzCpSysLicensedFeatureGroups
1.3.6.1.4.1.7262.2.5.1.7.1TablehzCpSysUpgradeFeatureGroupsTablenot-accessiblecurrentA table of system upgrade feature groups.
1.3.6.1.4.1.7262.2.5.1.7.1.1RowhzCpSysUpgradeFeatureGroupsEntrynot-accessiblecurrentA system upgrade feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.1.1.1ColumnhzCpUpgradeLicensedFeatureIndexread-onlycurrentA unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.1.1.2ColumnhzCpUpgradeLicensedFeatureKeyread-writecurrentThe key required for upgrading a feature.
1.3.6.1.4.1.7262.2.5.1.7.1.1.3ColumnhzCpUpgradeLicensedFeatureCountread-onlycurrentThis object indicates the number of times the licensed feature has been changed successfully.
1.3.6.1.4.1.7262.2.5.1.7.2TablehzCpSysDowngradeFeatureGroupsTablenot-accessiblecurrentA table of system downgrade system groups.
1.3.6.1.4.1.7262.2.5.1.7.2.1RowhzCpSysDowngradeFeatureGroupsEntrynot-accessiblecurrentA system downgrade feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.2.1.1ColumnhzCpDowngradeLicensedFeatureIndexread-onlycurrentA unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.2.1.2ColumnhzCpDowngradeLicensedFeatureread-writecurrentDowngrading a licensed feature.
1.3.6.1.4.1.7262.2.5.1.7.2.1.3ColumnhzCpDowngradeLicensedFeatureCountread-onlycurrentThis object indicates the number of times the licensed feature has been downgraded.
1.3.6.1.4.1.7262.2.5.1.7.2.1.4ColumnhzCpDowngradeLicensedFeatureKeyread-onlycurrentThe key generated after downgrading a licensed feature.
1.3.6.1.4.1.7262.2.5.1.7.3TablehzCpSysLicensedFeatureGroupsTablenot-accessiblecurrentA table of licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.3.1RowhzCpSysLicensedFeatureGroupsEntrynot-accessiblecurrentA system feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.3.1.1ColumnhzCpSysLicensedFeatureGroupIndexread-onlycurrentA unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.3.1.2ColumnhzCpSysLicensedFeatureGroupread-onlycurrentThe name of the licensed feature group.
1.3.6.1.4.1.7262.2.5.1.7.3.1.3ColumnhzCpSysLicensedFeatureGroupStatusread-onlycurrentSpecifies whether the feature group is unlicensed or licensed.
1.3.6.1.4.1.7262.2.5.1.8NodehzCpPeerAuthentication
1.3.6.1.4.1.7262.2.5.1.8.1ScalarhzCpPeerAuthenticationUniqueKeyread-writecurrentThe serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique.
1.3.6.1.4.1.7262.2.5.1.8.2ScalarhzCpPeerAuthenticationModeread-writecurrentThis sets the authentication mode for the system. If configured for unique authentication, a node only exchanges user traffic with one other node. The serial n…
1.3.6.1.4.1.7262.2.5.1.8.3ScalarhzCpPeerAuthenticationFailureActionread-writecurrentThis sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will all…
1.3.6.1.4.1.7262.2.5.1.8.4ScalarhzCpPeerAuthenticationStatusread-onlycurrentSpecifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated mea…
1.3.6.1.4.1.7262.2.5.1.8.5ScalarhzCpPeerAuthenticationGroupKeyread-writecurrentThe serial number of the group that this node will communicate within. This is only used when authentication mode is set to group.
1.3.6.1.4.1.7262.2.5.1.9NodehzCpCalendar
1.3.6.1.4.1.7262.2.5.1.9.1ScalarhzCpDateread-writecurrentA string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99)
1.3.6.1.4.1.7262.2.5.1.9.2ScalarhzCpTimeread-writecurrentA string in the format as follows: aa:bb:cc.ddd Where aa = hour of day ( range 00 to 23 ) bb = minute of hour ( range 00 to 59 ) cc = second of minute( range 0…
1.3.6.1.4.1.7262.2.5.1.9.3ScalarhzCpDateAndTimeForLastTimeChangeread-onlycurrentDate and Time for the last System time adjustment
1.3.6.1.4.1.7262.2.5.1.9.4ScalarhzCpLastTimeChangeread-onlycurrentLast System time adjustment in hundredths of seconds
1.3.6.1.4.1.7262.2.5.1.9.5ScalarhzCpCumulativeTimeChangeread-onlycurrentCumulative System time adjustmen in hundredths of seconds
1.3.6.1.4.1.7262.2.5.1.10NodehzCpSntp
1.3.6.1.4.1.7262.2.5.1.10.1ScalarhzCpSntpEnableread-writecurrentIndicates whether SNTP feature is enabled.
1.3.6.1.4.1.7262.2.5.1.10.2ScalarhzCpSntpOffsetread-writecurrentSystem time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.
1.3.6.1.4.1.7262.2.5.1.10.3TablehzCpSntpServerDepTablenot-accessibledeprecatedTable containing SNTP server entries
1.3.6.1.4.1.7262.2.5.1.10.3.1RowhzCpSntpServerDepEntrynot-accessibledeprecatedContains the SNTP server information
1.3.6.1.4.1.7262.2.5.1.10.3.1.1ColumnhzCpSntpServerIndexDepread-onlydeprecatedA unique value for each server.
1.3.6.1.4.1.7262.2.5.1.10.3.1.2ColumnhzCpSntpServerIpAddressDepread-onlydeprecatedThe IP address of the SNTP server. This object is deprecated by hzCpSntpServerAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.1.10.3.1.3ColumnhzCpSntpServerStatusDepread-onlydeprecatedThe status of the SNTP server.
1.3.6.1.4.1.7262.2.5.1.10.3.1.4ColumnhzCpSntpServerStratumDepread-onlydeprecatedSpecifies the stratum of a server, 0 for failed server
1.3.6.1.4.1.7262.2.5.1.10.4TablehzCpSntpServerTablenot-accessiblecurrentTable containing SNTP server entries
1.3.6.1.4.1.7262.2.5.1.10.4.1RowhzCpSntpServerEntrynot-accessiblecurrentContains the SNTP server information
1.3.6.1.4.1.7262.2.5.1.10.4.1.1ColumnhzCpSntpServerIndexread-onlycurrentA unique value for each server.
1.3.6.1.4.1.7262.2.5.1.10.4.1.2ColumnhzCpSntpServerDomainread-writecurrentIndicates SNTP server inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.1.10.4.1.3ColumnhzCpSntpServerAddressread-writecurrentIndicates SNTP server inet address octet string.
1.3.6.1.4.1.7262.2.5.1.10.4.1.4ColumnhzCpSntpServerStatusread-onlycurrentThe status of the SNTP server.
1.3.6.1.4.1.7262.2.5.1.10.4.1.5ColumnhzCpSntpServerStratumread-onlycurrentSpecifies the stratum of a server, 0 for failed server
1.3.6.1.4.1.7262.2.5.1.10.5ScalarhzCpSntpRestoreDefaultread-writecurrentRestores SNTP servers to default Addresses.
1.3.6.1.4.1.7262.2.5.1.11NodehzCpSyncE
1.3.6.1.4.1.7262.2.5.1.11.1ScalarhzCpSyncEStateread-writecurrentIn manual mode, syncE source will use primary clock source and when the primary source has loss of lock, the syncE goes into holdover. The primary source will …
1.3.6.1.4.1.7262.2.5.1.11.2ScalarhzCpSyncEPrimarySourceread-writecurrentSelects which port to be used as syncE master clock source.
1.3.6.1.4.1.7262.2.5.1.11.3ScalarhzCpSyncESecondarySourceread-writecurrentSelects which port to be used as syncE secondary when the master syncE is not available.
1.3.6.1.4.1.7262.2.5.1.11.4ScalarhzCpSyncEMemberPortsread-writecurrentEnter a string indicating all SyncE member ports. Example: p1 p4 Port options: p1 p2 p3 p4 wp1
1.3.6.1.4.1.7262.2.5.1.11.5ScalarhzCpSyncEForcedHoldoverread-writecurrentThis forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means in…
1.3.6.1.4.1.7262.2.5.1.11.6ScalarhzCpSyncERevertiveread-writecurrentIn revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time…
1.3.6.1.4.1.7262.2.5.1.11.7ScalarhzCpSyncEClockSourceread-onlycurrentRetrieves Synce clock source.
1.3.6.1.4.1.7262.2.5.1.11.8ScalarhzCpSyncEAcquisitionStatusread-onlycurrentRetrieves Synce acquisition status.
1.3.6.1.4.1.7262.2.5.1.11.9ScalarhzCpSyncEWanderFilterread-writecurrentITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy…
1.3.6.1.4.1.7262.2.5.1.12NodehzCpBac
1.3.6.1.4.1.7262.2.5.1.12.1ScalarhzCpBacRecordAvgPeriodread-writecurrentConfigures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds.
1.3.6.1.4.1.7262.2.5.1.12.2TablehzCpBacTablenot-accessiblecurrentTable containing BAC entries
1.3.6.1.4.1.7262.2.5.1.12.2.1RowhzCpBacEntrynot-accessiblecurrentContains the BAC information for all queues
1.3.6.1.4.1.7262.2.5.1.12.2.1.1ColumnhzCpBacQIndexread-onlycurrentA unique value for each of the 8 Queues.
1.3.6.1.4.1.7262.2.5.1.12.2.1.2ColumnhzCpBacQEnableread-writecurrentConfigure queue compression state to disable/enable.
1.3.6.1.4.1.7262.2.5.1.12.2.1.3ColumnhzCpBacQBlockSizeread-writecurrentConfigure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Vali…
1.3.6.1.4.1.7262.2.5.1.12.2.1.4ColumnhzCpBacRecordLoggingread-writecurrentEnables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog.
1.3.6.1.4.1.7262.2.5.1.12.2.1.5ColumnhzCpBacUncompressedRatioread-onlycurrentRunning average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in data over specified average period in percentage.
1.3.6.1.4.1.7262.2.5.1.12.2.1.6ColumnhzCpBacGainread-onlycurrentThe Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all bytes compressed and bytes uncompressed calculated o…
1.3.6.1.4.1.7262.2.5.1.13NodehzCpEcfmVsm
1.3.6.1.4.1.7262.2.5.1.13.1NodehzCpBandwidthVsm
1.3.6.1.4.1.7262.2.5.1.13.1.1ScalarhzCpBwVsmVendorOuiread-writecurrentAs string representing the vendor OUI code. Example: 00-00-0C for Cisco
1.3.6.1.4.1.7262.2.5.1.13.1.2ScalarhzCpBwVsmMdLevelread-writecurrentThe Maintenanc level of Bandwidth VSM. The valid range is between 0-7. By default, the BW-VSM is associated with Maintenance Level 0.
1.3.6.1.4.1.7262.2.5.1.13.1.3ScalarhzCpBwVsmWaitTimeread-writecurrentThe wait time before sending vendor specific message.
1.3.6.1.4.1.7262.2.5.1.13.1.4ScalarhzCpBwVsmPeriodread-writecurrentThis indicates the VSM transmission period. The default value is 10 seconds.
1.3.6.1.4.1.7262.2.5.1.13.1.5ScalarhzCpBwVsmVlanTagread-writecurrentBandwidth VSM can be configured to be transmitted with a configurable valid VLAN tag. By default, the BW-VSM will be sent untagged.
1.3.6.1.4.1.7262.2.5.1.13.1.6ScalarhzCpBwVsmVlanIdread-writecurrentThis indicates the VSM VLAN Id.
1.3.6.1.4.1.7262.2.5.1.13.1.7ScalarhzCpBwVsmVlanPriorityread-writecurrentThis indicates the VSM priority. The valid range is between 1-7 and the default priority is 7.
1.3.6.1.4.1.7262.2.5.1.13.1.8ScalarhzCpBwVsmPortListread-writecurrentThe vendor specific message will only be sent out through the specified ports in the list. Port options: a comma-separted list of ports p1 to p4 Example: p1,p2
1.3.6.1.4.1.7262.2.5.1.13.1.9ScalarhzCpBwVsmStateread-writecurrentThis enables or disables vendor specific messaging.
1.3.6.1.4.1.7262.2.5.1.14NodehzCpPM
1.3.6.1.4.1.7262.2.5.1.14.1TablehzCpPmRspiThresholdTablenot-accessiblecurrentPerformance Monitoring table for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.2.5.1.14.1.1RowhzCpPmRspiThresholdEntrynot-accessiblecurrentContains information for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.2.5.1.14.1.1.1ColumnhzCpPmRspiThrIndexnot-accessiblecurrentIndex to PM RSPI Threshold table.
1.3.6.1.4.1.7262.2.5.1.14.1.1.2ColumnhzCpPmRLT1read-writecurrentReceive Level Threshold 1, represents the number of seconds below the first threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.3ColumnhzCpPmRLT2read-writecurrentReceive Level Threshold 2, represents the number of seconds below the second threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.4ColumnhzCpPmRLT3read-writecurrentReceive Level Threshold 3, represents the number of seconds below the third threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.5ColumnhzCpPmRLT4read-writecurrentReceive Level Threshold 4, represents the number of seconds below the fourth threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.6ColumnhzCpPmTLT1read-writecurrentTransmit Level Threshold 1, represents the number of seconds below the first threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.7ColumnhzCpPmTLT2read-writecurrentTransmit Level Threshold 2, represents the number of seconds below the second threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.8ColumnhzCpPmRspiThrRowStatusread-writecurrentThis object is used for applying all RSPI thresholds simultaneously.
1.3.6.1.4.1.7262.2.5.1.14.2TablehzCpPmAdvThresholdTablenot-accessiblecurrentPerformance Monitoring table for Capacity thresholds.
1.3.6.1.4.1.7262.2.5.1.14.2.1RowhzCpPmAdvThresholdEntrynot-accessiblecurrentContains information for Capacity thresholds.
1.3.6.1.4.1.7262.2.5.1.14.2.1.1ColumnhzCpPmAdvThrIndexnot-accessiblecurrentIndex to PM Capacity Threshold table.
1.3.6.1.4.1.7262.2.5.1.14.2.1.2ColumnhzCpPmAdvTxHitsT1read-writecurrentTransmit Hits Threshold 1.
1.3.6.1.4.1.7262.2.5.1.14.2.1.3ColumnhzCpPmAdvRxHitsT1read-writecurrentReceive Hits Threshold 1.
1.3.6.1.4.1.7262.2.5.1.14.2.1.4ColumnhzCpPmAdvRowStatusread-writecurrentThis object is used for applying all Capacity thresholds simultaneously.
1.3.6.1.4.1.7262.2.5.2NodehzCpManagement
1.3.6.1.4.1.7262.2.5.2.1ScalarhzCpMacAddressread-onlycurrentThe MAC Address of the system.
1.3.6.1.4.1.7262.2.5.2.2ScalarhzCpTelnetAccessModeread-writecurrentIndicates whether Telnet access is allowed.
1.3.6.1.4.1.7262.2.5.2.3ScalarhzCpSshAccessModeread-writecurrentIndicates whether ssh access is allowed.
1.3.6.1.4.1.7262.2.5.2.4NodehzCpNetworkManagementInterface
1.3.6.1.4.1.7262.2.5.2.4.1NodehzCpNetMgmtInterfaceVlan
1.3.6.1.4.1.7262.2.5.2.4.1.1ScalarhzCpNetMgmtPortListread-writecurrentDescribes the network management interface connection options. Enter a string indicating the management port. Example: p3 Port options: p1 or p2 or p3 or p4 or…
1.3.6.1.4.1.7262.2.5.2.4.1.2ScalarhzCpNetMgmtVlanTagIdread-writecurrentIndicates the VLAN Tag Id (1...4095). Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.3ScalarhzCpNetMgmtVlanTagPriorityread-writecurrentThe priority for VLAN tagging (0...7) Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.4ScalarhzCpNetMgmtVlanTaggingread-writecurrentDisables or enables VLAN tagging. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs …
1.3.6.1.4.1.7262.2.5.2.4.1.5ScalarhzCpNetMgmtDscpPriorityread-writecurrentThe Differentiated Serices Code Point (DSCP) priority to classify and prioritize types of traffic (0...63) Note: Changing this option doesn't get applied to th…
1.3.6.1.4.1.7262.2.5.2.4.2NodehzCpNetMgmtIpv4
1.3.6.1.4.1.7262.2.5.2.4.2.1ScalarhzCpIpAddressread-writecurrentThe IP Address of the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.2.2ScalarhzCpSubnetMaskread-writecurrentThe subnet mask for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.2.3ScalarhzCpDefaultGatewayread-writecurrentThe default gateway for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3NodehzCpNetMgmttIpv6
1.3.6.1.4.1.7262.2.5.2.4.3.1ScalarhzCpIpv6Domainread-onlycurrentIndicates ipv6 inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.2ScalarhzCpIpv6Addressread-writecurrentIndicates ipv6 inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.3ScalarhzCpIpv6Prefixread-writecurrentIndicates ipv6 prefix. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.4ScalarhzCpIpv6GatewayDomainread-onlycurrentIndicates ipv6 gateway inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.5ScalarhzCpIpv6GatewayAddressread-writecurrentIndicates ipv6 gateway inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.6ScalarhzCpIpv6LinkLocalDomainread-onlycurrentIndicates ipv6 link local inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.7ScalarhzCpIpv6LinkLocalAddressread-onlycurrentIndicates ipv6 link local inet address octet string.
1.3.6.1.4.1.7262.2.5.2.4.4ScalarhzCpNetMgmtApplyToSystemread-writecurrentIf system allows, setting this oid applies all network management interface changes to the system and a system reset can be avoided.
1.3.6.1.4.1.7262.2.5.2.5NodehzCpSnmp
1.3.6.1.4.1.7262.2.5.2.5.1ScalarhzCpSnmpUserAccessread-writecurrentSpecifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to g…
1.3.6.1.4.1.7262.2.5.2.5.2ScalarhzCpSnmpManagerAnyCommunityNameread-writecurrentThe community string name used by the 'any' manager.
1.3.6.1.4.1.7262.2.5.2.5.3ScalarhzCpSnmpSetRequestsread-onlycurrentIndicates whether SNMP SET requests are allowed.
1.3.6.1.4.1.7262.2.5.2.5.4TablehzCpSnmpManagersDepTablenot-accessibledeprecatedTable containing snmp manager entries
1.3.6.1.4.1.7262.2.5.2.5.4.1RowhzCpSnmpManagersDepEntrynot-accessibledeprecatedContains the snmp manager information
1.3.6.1.4.1.7262.2.5.2.5.4.1.1ColumnhzCpSnmpManagersIndexDepread-onlydeprecatedA unique value for each manager.
1.3.6.1.4.1.7262.2.5.2.5.4.1.2ColumnhzCpSnmpManagerIpAddressDepread-onlydeprecatedThis object is deprecated by hzCpSnmpManagerAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.5.4.1.3ColumnhzCpSnmpManagerCommunityNameDepread-onlydeprecatedThe community string name used by the manager.
1.3.6.1.4.1.7262.2.5.2.5.4.1.4ColumnhzCpSnmpManagerActivatedDepread-onlydeprecatedSpecifies whether a specific manager is allowed to access the system. This object is deprecated by hzCpSnmpManagersActivated. The value is 0.0.0.0 if not avail…
1.3.6.1.4.1.7262.2.5.2.5.5TablehzCpSnmpV3ManagersTablenot-accessiblecurrentTable containing snmp V3 manager entries
1.3.6.1.4.1.7262.2.5.2.5.5.1RowhzCpSnmpV3ManagersEntrynot-accessiblecurrentContains the snmp v3 manager information
1.3.6.1.4.1.7262.2.5.2.5.5.1.1ColumnhzCpSnmpV3ManagersIndexread-onlycurrentA unique value for each v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.2ColumnhzCpSnmpV3ManagerUserNameread-writecurrentThe user name of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.3ColumnhzCpSnmpV3ManagerAuthProtocolread-writecurrentThe authentication alogorithm used by the v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.4ColumnhzCpSnmpV3ManagerAuthPasswordread-writecurrentThe authentication password of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.5ColumnhzCpSnmpV3ManagerPrivProtocolread-writecurrentThe privacy encryption alogorithm used by the v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.6ColumnhzCpSnmpV3ManagerPrivPasswordread-writecurrentThe privacy password of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.7ColumnhzCpSnmpV3ManagerActivatedread-writecurrentSpecifies whether a specific v3 manager is allowed to access the system
1.3.6.1.4.1.7262.2.5.2.5.6ScalarhzCpSnmpAccessModeread-onlycurrentIndicates the running SNMP version on the system.
1.3.6.1.4.1.7262.2.5.2.5.7TablehzCpSnmpManagersTablenot-accessiblecurrentTable containing snmp manager entries
1.3.6.1.4.1.7262.2.5.2.5.7.1RowhzCpSnmpManagersEntrynot-accessiblecurrentContains the snmp manager information
1.3.6.1.4.1.7262.2.5.2.5.7.1.1ColumnhzCpSnmpManagersIndexread-onlycurrentA unique value for each manager.
1.3.6.1.4.1.7262.2.5.2.5.7.1.2ColumnhzCpSnmpManagerDomainread-writecurrentIndicates snmp manager inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.5.7.1.3ColumnhzCpSnmpManagerAddressread-writecurrentIndicates snmp manager inet address octet string.
1.3.6.1.4.1.7262.2.5.2.5.7.1.4ColumnhzCpSnmpManagerCommunityNameread-writecurrentThe community string name used by the manager.
1.3.6.1.4.1.7262.2.5.2.5.7.1.5ColumnhzCpSnmpManagersPrefixLengthread-writecurrentThe Ip Address prefix length. The valid range for IPV4 Address is 1-32 and for IPV6 is 1-128.
1.3.6.1.4.1.7262.2.5.2.5.7.1.32ColumnhzCpSnmpManagerActivatedread-writecurrentSpecifies whether a specific manager is allowed to access the system. This object deprecates hzCpSnmpManagerActivatedDep.
1.3.6.1.4.1.7262.2.5.2.6NodehzCpTrapConfig
1.3.6.1.4.1.7262.2.5.2.6.1TablehzCpSnmpTrapHostDepTablenot-accessibledeprecatedTable containing SNMP trap host entries.
1.3.6.1.4.1.7262.2.5.2.6.1.1RowhzCpSnmpTrapHostDepEntrynot-accessibledeprecatedThe snmp trap host entry containing all the trap host information
1.3.6.1.4.1.7262.2.5.2.6.1.1.1ColumnhzCpSnmpTrapHostIndexDepread-onlydeprecatedA unique value for each trap host.
1.3.6.1.4.1.7262.2.5.2.6.1.1.2ColumnhzCpSnmpTrapHostIpAddressDepread-onlydeprecatedThis object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.1.1.3ColumnhzCpSnmpTrapHostCommunityNameDepread-onlydeprecatedThe community string name used in Traps.
1.3.6.1.4.1.7262.2.5.2.6.1.1.4ColumnhzCpSnmpTrapHostActivatedDepread-onlydeprecatedThis object is deprecated by hzCpSnmpTrapHostActivated. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.2TablehzCpSnmpV3TrapHostsDepTablenot-accessibledeprecatedTable containing snmp V3 trap host entries
1.3.6.1.4.1.7262.2.5.2.6.2.1RowhzCpSnmpV3TrapHostsDepEntrynot-accessibledeprecatedContains the snmp v3 trap host information
1.3.6.1.4.1.7262.2.5.2.6.2.1.1ColumnhzCpSnmpV3TrapHostsIndexDepread-onlydeprecatedA unique value for each v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.2ColumnhzCpSnmpV3TrapHostIpAddressDepread-onlydeprecatedThis object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.2.1.3ColumnhzCpSnmpV3TrapHostUserNameDepread-onlydeprecatedThe user name of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.4ColumnhzCpSnmpV3TrapHostAuthProtocolDepread-onlydeprecatedThe authentication alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.5ColumnhzCpSnmpV3TrapHostAuthPasswordDepread-onlydeprecatedThe authentication password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.6ColumnhzCpSnmpV3TrapHostPrivProtocolDepread-onlydeprecatedThe privacy encryption alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.7ColumnhzCpSnmpV3TrapHostPrivPasswordDepread-onlydeprecatedThe privacy password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.8ColumnhzCpSnmpV3TrapHostActivatedDepread-onlydeprecatedSpecifies whether a specific v3 trap host is allowed to access the system
1.3.6.1.4.1.7262.2.5.2.6.3NodehzCpTrapEnable
1.3.6.1.4.1.7262.2.5.2.6.3.1ScalarhzCpColdStartTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.2ScalarhzCpLinkDownTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.3ScalarhzCpPeerAuthenticationFailureTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.4ScalarhzCpHitlessAamConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.5ScalarhzCpHitlessAamModulationLoweredTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.6ScalarhzCpHitlessAamModulationChangedEventTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.7ScalarhzCpAtpcConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.8ScalarhzCpAtpcAutoDisabledTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.9ScalarhzCpNoSntpServersReachableTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.10ScalarhzCpFrequencyFileInvalidTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.11ScalarhzCpAggregateDroppedFramesThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.12ScalarhzCpQueueDroppedFramesThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.13ScalarhzCpBwUtilizationThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.14ScalarhzCpQueueDepthThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.15ScalarhzCpRlsConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.16ScalarhzCpRlsShutdownActivatedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.17ScalarhzCpRlsQueueBasedShutdownActivatedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.18ScalarhzCpModemRxLossOfSignalLockTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.19ScalarhzCpModemSnrBelowThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.20ScalarhzCpModemEqualizerStressThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.21ScalarhzCpRslBelowThresholdTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.22ScalarhzCpRadioSynthLostLockTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.23ScalarhzCpRadioCalTableNotAvailableTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.24ScalarhzCpRadioDrainCurrentOutOfLimitTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.25ScalarhzCpRadioPowerAmplifierTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.26ScalarhzCpTemperatureOutOfLimitTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.27ScalarhzCpRedundancyConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.28ScalarhzCpRedundancyActiveOnSecondaryTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.29ScalarhzCpRedundancyOperatingInForcedSwitchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.30ScalarhzCpRedundancyEnetCrossLinkTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.31ScalarhzCpRedundancyActiveUsingPartnerWLinkTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.32ScalarhzCpRedundancyStandbyWLinkInUseTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.33ScalarhzCpRedundancyStandbyOnPrimaryTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.34ScalarhzCpX2DeliveringHalfCapacityTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.35ScalarhzCpBncCableSignalNotDetectedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.36ScalarhzCpEthernetSpeedReducedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.37ScalarhzCpSynceLostLockTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.38ScalarhzCpSynceSecondarySourceInUseTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.39ScalarhzCpUserSessionTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.40ScalarhzCpInvalidSystemConfigTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.41ScalarhzCpMibChangeNotSavedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.42ScalarhzCpTransmitterLossOfSyncTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.43ScalarhzCpRadioLinearityCalErrorTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.44ScalarhzCpSynceConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.45ScalarhzCpCryptoPowerUpTestsFailedTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.46ScalarhzCpCryptoConfigMismatchTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.47ScalarhzCpSystemTimeChangeTrapread-writecurrentSpecifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.48ScalarhzCpCodeCheckTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.49ScalarhzCpConfigChangedTrapread-writecurrentSpecifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.4TablehzCpSnmpTrapHostTablenot-accessiblecurrentTable containing SNMP trap host entries.
1.3.6.1.4.1.7262.2.5.2.6.4.1RowhzCpSnmpTrapHostEntrynot-accessiblecurrentThe snmp trap host entry containing all the trap host information
1.3.6.1.4.1.7262.2.5.2.6.4.1.1ColumnhzCpSnmpTrapHostIndexread-onlycurrentA unique value for each trap host.
1.3.6.1.4.1.7262.2.5.2.6.4.1.2ColumnhzCpSnmpTrapHostDomainread-writecurrentIndicates snmp trap host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.6.4.1.3ColumnhzCpSnmpTrapHostAddressread-writecurrentIndicates snmp trap host inet address octet string. This object deprecates hzCpSnmpTrapHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.6.4.1.4ColumnhzCpSnmpTrapHostCommunityNameread-writecurrentThe community string name used in Traps.
1.3.6.1.4.1.7262.2.5.2.6.4.1.32ColumnhzCpSnmpTrapHostActivatedread-writecurrentSpecifies whether traps are to be sent to this specific host or not. This object deprecates hzCpSnmpTrapHostActivatedDep.
1.3.6.1.4.1.7262.2.5.2.6.5TablehzCpSnmpV3TrapHostsTablenot-accessiblecurrentTable containing snmp V3 trap host entries
1.3.6.1.4.1.7262.2.5.2.6.5.1RowhzCpSnmpV3TrapHostsEntrynot-accessiblecurrentContains the snmp v3 trap host information
1.3.6.1.4.1.7262.2.5.2.6.5.1.1ColumnhzCpSnmpV3TrapHostsIndexread-onlycurrentA unique value for each v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.2ColumnhzCpSnmpV3TrapHostDomainread-writecurrentIndicates v3 trap host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.6.5.1.3ColumnhzCpSnmpV3TrapHostAddressread-writecurrentIndicates snmp v3 trap host inet address octet string. This object deprecates hzCpSnmpV3TrapHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.6.5.1.4ColumnhzCpSnmpV3TrapHostUserNameread-writecurrentThe user name of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.5ColumnhzCpSnmpV3TrapHostAuthProtocolread-writecurrentThe authentication alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.6ColumnhzCpSnmpV3TrapHostAuthPasswordread-writecurrentThe authentication password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.7ColumnhzCpSnmpV3TrapHostPrivProtocolread-writecurrentThe privacy encryption alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.8ColumnhzCpSnmpV3TrapHostPrivPasswordread-writecurrentThe privacy password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.32ColumnhzCpSnmpV3TrapHostActivatedread-writecurrentSpecifies whether v3 traps are to be sent to this specific host or not. This object deprecates hzCpSnmpV3TrapHostActivatedDep.
1.3.6.1.4.1.7262.2.5.2.7NodehzCpRadius
1.3.6.1.4.1.7262.2.5.2.7.1ScalarhzCpRadiusSuperUserAuthenticationread-writecurrentIf strict mode is off, the super user can login when radius is turned off or unreachable.
1.3.6.1.4.1.7262.2.5.2.7.2ScalarhzCpRadiusServerTimeOutread-onlycurrentTimeout period for authentication requests
1.3.6.1.4.1.7262.2.5.2.7.3ScalarhzCpRadiusServerDeadTimeread-onlycurrentTime to declare an unresponsive server 'dead'
1.3.6.1.4.1.7262.2.5.2.7.4ScalarhzCpRadiusServerReTransmitread-onlycurrentMaximum number of retransmits to an unresponsive server
1.3.6.1.4.1.7262.2.5.2.7.5TablehzCpRadiusServerDepTablenot-accessibledeprecatedTable containing radius server entries
1.3.6.1.4.1.7262.2.5.2.7.5.1RowhzCpRadiusServerDepEntrynot-accessibledeprecatedContains the SNTP server information
1.3.6.1.4.1.7262.2.5.2.7.5.1.1ColumnhzCpRadiusServerIndexDepread-onlydeprecatedA unique value for each radius server.
1.3.6.1.4.1.7262.2.5.2.7.5.1.2ColumnhzCpRadiusCfgdHostIpAddressDepread-onlydeprecatedThe IP address of the configured radius server. This object is deprecated by hzCpRadiusCfgdHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.7.5.1.3ColumnhzCpRadiusCfgdHostKeyDepread-onlydeprecatedThe key of the configured radius server.
1.3.6.1.4.1.7262.2.5.2.7.6TablehzCpRadiusServerTablenot-accessiblecurrentTable containing radius server entries
1.3.6.1.4.1.7262.2.5.2.7.6.1RowhzCpRadiusServerEntrynot-accessiblecurrentContains the SNTP server information
1.3.6.1.4.1.7262.2.5.2.7.6.1.1ColumnhzCpRadiusServerIndexread-onlycurrentA unique value for each radius server.
1.3.6.1.4.1.7262.2.5.2.7.6.1.2ColumnhzCpRadiusCfgdHostDomainread-writecurrentIndicates configured radius radius inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.7.6.1.3ColumnhzCpRadiusCfgdHostAddressread-writecurrentIndicates configured radius server inet address octet string. This object deprecates hzCpRadiusCfgdHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.7.6.1.4ColumnhzCpRadiusCfgdHostKeyread-writecurrentThe key of the configured radius server.
1.3.6.1.4.1.7262.2.5.2.8NodehzCpManagementSessions
1.3.6.1.4.1.7262.2.5.2.8.1TablehzCpUserSessionUserTablenot-accessiblecurrentA table of user sessions
1.3.6.1.4.1.7262.2.5.2.8.1.1RowhzCpUserSessionUserEntrynot-accessiblecurrentUser session entry
1.3.6.1.4.1.7262.2.5.2.8.1.1.1ColumnhzCpUserSessionUserIndexread-onlycurrentA unique value for each user.
1.3.6.1.4.1.7262.2.5.2.8.1.1.2ColumnhzCpUserSessionUserNameread-onlycurrentThe username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in pr…
1.3.6.1.4.1.7262.2.5.2.8.1.1.3ColumnhzCpUserSessionUserConnectionTyperead-onlycurrentEither telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.
1.3.6.1.4.1.7262.2.5.2.8.1.1.4ColumnhzCpUserSessionUserStateread-onlycurrentThe state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th…
1.3.6.1.4.1.7262.2.5.2.9NodehzCpHttp
1.3.6.1.4.1.7262.2.5.2.9.1ScalarhzCpHttpEnableread-writecurrentIndicates whether HTTP is enabled.
1.3.6.1.4.1.7262.2.5.2.9.2NodehzCpHttpSecure
1.3.6.1.4.1.7262.2.5.2.9.2.1ScalarhzCpHttpSecureCertificateStatusread-onlycurrentReturns the HTTPS certificate status
1.3.6.1.4.1.7262.2.5.2.9.2.2ScalarhzCpHttpSecureAccessForAdminUsersread-writecurrentthe HTTPS access requirement for Admin user group.
1.3.6.1.4.1.7262.2.5.2.9.2.3ScalarhzCpHttpSecureAccessForNocUsersread-writecurrentthe HTTPS access requirement for Noc user group.
1.3.6.1.4.1.7262.2.5.2.9.2.4ScalarhzCpHttpSecureAccessForSuperUsersread-writecurrentthe HTTPS access requirement for Super user group.
1.3.6.1.4.1.7262.2.5.3NodehzCpNetworkInterface
1.3.6.1.4.1.7262.2.5.3.1NodehzCpEnetPort
1.3.6.1.4.1.7262.2.5.3.1.1TablehzCpEnetPortConfigTablenot-accessiblecurrentA table for enet port configuration
1.3.6.1.4.1.7262.2.5.3.1.1.1RowhzCpEnetPortConfigEntrynot-accessiblecurrentAn entry for enet port configuration
1.3.6.1.4.1.7262.2.5.3.1.1.1.1ColumnhzCpEnetPortIndexread-onlycurrentA unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.1.1.2ColumnhzCpEnetPortNameread-onlycurrentDescribes the port interface name
1.3.6.1.4.1.7262.2.5.3.1.1.1.3ColumnhzCpEnetPortAutoNegotiationread-writecurrentTurns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex.
1.3.6.1.4.1.7262.2.5.3.1.1.1.4ColumnhzCpEnetPortSpeedread-writecurrentConfigure the port interface speed .
1.3.6.1.4.1.7262.2.5.3.1.1.1.5ColumnhzCpEnetPortDuplexread-onlycurrentConfigure the port interface duplex.
1.3.6.1.4.1.7262.2.5.3.1.1.1.6ColumnhzCpEnetPortMediaread-writecurrentConfigure the port interface media type.
1.3.6.1.4.1.7262.2.5.3.1.1.1.7ColumnhzCpEnetPortAdminStateread-writecurrentEnable or disable the admin status of the port.
1.3.6.1.4.1.7262.2.5.3.1.1.1.8ColumnhzCpEnetPortPauseFrameread-writecurrentWhen PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. When PAUSE is no…
1.3.6.1.4.1.7262.2.5.3.1.1.1.9ColumnhzCpEnetPortMaxFrameSizeread-writecurrentFor port the default maximum frame size is 1600 bytes. The settable maximum frame size must be a multiple of 128. If the chosen maximum frame size is not a mul…
1.3.6.1.4.1.7262.2.5.3.1.1.1.10ColumnhzCpEnetPortOpticalTransceiverStateread-writecurrentWhen it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled. This option is valid for port1 only if media type is config…
1.3.6.1.4.1.7262.2.5.3.1.1.1.11ColumnhzCpEnetPortStateread-writecurrentEnables or disables enet-port3 or enet-port4.
1.3.6.1.4.1.7262.2.5.3.1.1.1.12ColumnhzCpEnetPayloadStateread-writecurrentEnables or disables payload on a specific port. If payload state is disabled for that port, it's considered as purely management.
1.3.6.1.4.1.7262.2.5.3.1.2TablehzCpEnetPortStatusTablenot-accessiblecurrentA table for enet port status
1.3.6.1.4.1.7262.2.5.3.1.2.1RowhzCpEnetPortStatusEntrynot-accessiblecurrentAn entry for enet port status
1.3.6.1.4.1.7262.2.5.3.1.2.1.1ColumnhzCpEnetPortStatusIndexread-onlycurrentA unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.2.1.2ColumnhzCpEnetPortLinkStatusread-onlycurrentIndicates the port link status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.3ColumnhzCpEnetPortAutoNegotiationStatusread-onlycurrentIndicates the port AutoNegotiation status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.4ColumnhzCpEnetPortSpeedStatusread-onlycurrentIndicates the port interface speed status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.5ColumnhzCpEnetPortDuplexStatusread-onlycurrentIndicates the port interface duplex status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.6ColumnhzCpEnetPortMediaStatusread-onlycurrentIndicates the port interface media status.
1.3.6.1.4.1.7262.2.5.3.1.3TablehzCpEnetPortStatsTablenot-accessiblecurrentA table for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.3.1RowhzCpEnetPortStatsEntrynot-accessiblecurrentAn entry for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.3.1.1ColumnhzCpEnetPortStatsIndexread-onlycurrentA unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.3.1.2ColumnhzCpEnetPortTxFramesread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.7262.2.5.3.1.3.1.3ColumnhzCpEnetPortTxBytesread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.7262.2.5.3.1.3.1.4ColumnhzCpEnetPortRxFramesOkread-onlycurrentThe total number of bytes received on the interface, including framing characters.
1.3.6.1.4.1.7262.2.5.3.1.3.1.5ColumnhzCpEnetPortRxBytesOkread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.7262.2.5.3.1.3.1.6ColumnhzCpEnetPortRxFramesLengthErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.7262.2.5.3.1.3.1.7ColumnhzCpEnetPortRxFramesCrcErrorsread-onlycurrentThe number of packets received via the interface which were discarded because of rx frames CRC errors.
1.3.6.1.4.1.7262.2.5.3.1.3.1.8ColumnhzCpEnetPortRxDiscardedread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.7262.2.5.3.1.4NodehzCpEnetAggregatedStats
1.3.6.1.4.1.7262.2.5.3.1.4.1ScalarhzCpEnetAggTxFramesread-onlycurrentThe current count of aggregated port egress frames.
1.3.6.1.4.1.7262.2.5.3.1.4.2ScalarhzCpEnetAggTxBytesread-onlycurrentThe current count of aggregated port egress bytes.
1.3.6.1.4.1.7262.2.5.3.1.4.3ScalarhzCpEnetAggRxFramesOKread-onlycurrentThe current count of aggregated port ingress frames.
1.3.6.1.4.1.7262.2.5.3.1.4.4ScalarhzCpEnetAggRxBytesOKread-onlycurrentThe current count of aggregated port ingress bytes.
1.3.6.1.4.1.7262.2.5.3.1.4.5ScalarhzCpEnetAggRxFramesLengthErrorread-onlycurrentThe current count of aggregated frames received that were discarded due to length error.
1.3.6.1.4.1.7262.2.5.3.1.4.6ScalarhzCpEnetAggPortRxFramesCrcErrorread-onlycurrentThe current count of aggregated frames received that were discarded due to CRC error.
1.3.6.1.4.1.7262.2.5.3.1.4.7ScalarhzCpEnetAggPortRxFramesDropsread-onlycurrentThe current count of aggregated frames received that were discarded due to an error.
1.3.6.1.4.1.7262.2.5.3.1.4.8ScalarhzCpEnetAggBWUtilizationread-onlycurrentThe carried load over link capacity for port.
1.3.6.1.4.1.7262.2.5.3.1.4.9ScalarhzCpEnetAggIngressDataRateread-onlycurrentThe data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
1.3.6.1.4.1.7262.2.5.3.1.4.10ScalarhzCpEnetAggEgressDataRateread-onlycurrentThe data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
1.3.6.1.4.1.7262.2.5.3.1.4.11TablehzCpEnetAggFramesInQueueTablenot-accessiblecurrentA table of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1RowhzCpEnetAggFramesInQueueEntrynot-accessiblecurrentAn entry of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.1ColumnhzCpEnetAggFramesInQueueIndexread-onlycurrentA unique value for each of the 8 queues.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.2ColumnhzCpEnetAggFramesInQueueread-onlycurrentThe current count of frames in queues.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.3ColumnhzCpEnetAggFramesInQueueDiscardedread-onlycurrentThe current count of frames received in queues that were discarded due to an error. One possible reason is lack of buffer space.
1.3.6.1.4.1.7262.2.5.3.1.5TablehzCpEnetPortLcStatsTablenot-accessiblecurrentA table for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.5.1RowhzCpEnetPortLcStatsEntrynot-accessiblecurrentAn entry for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.5.1.1ColumnhzCpEnetPortLcStatsIndexread-onlycurrentA unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.5.1.2ColumnhzCpEnetPortLcTxFramesread-onlycurrentA low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, includ…
1.3.6.1.4.1.7262.2.5.3.1.5.1.3ColumnhzCpEnetPortLcTxBytesread-onlycurrentA low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-b…
1.3.6.1.4.1.7262.2.5.3.1.5.1.4ColumnhzCpEnetPortLcRxFramesOkread-onlycurrentA low capacity 32-bit counter representing total number of bytes received on the interface, including framing characters.
1.3.6.1.4.1.7262.2.5.3.1.5.1.5ColumnhzCpEnetPortLcRxBytesOkread-onlycurrentA low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent t…
1.3.6.1.4.1.7262.2.5.3.1.5.1.6ColumnhzCpEnetPortLcRxFramesLengthErrorsread-onlycurrentA low capacity 32-bit counter representing the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protoco…
1.3.6.1.4.1.7262.2.5.3.1.5.1.7ColumnhzCpEnetPortLcRxFramesCrcErrorsread-onlycurrentA low capacity 32-bit counter representing the number of packets received via the interface which were discarded because of rx frames CRC errors.
1.3.6.1.4.1.7262.2.5.3.1.5.1.8ColumnhzCpEnetPortLcRxDiscardedread-onlycurrentA low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent t…
1.3.6.1.4.1.7262.2.5.3.1.6NodehzCpEnetAggregatedLcStats
1.3.6.1.4.1.7262.2.5.3.1.6.1ScalarhzCpEnetAggLcTxFramesread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated port egress frames.
1.3.6.1.4.1.7262.2.5.3.1.6.2ScalarhzCpEnetAggLcTxBytesread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated port egress bytes.
1.3.6.1.4.1.7262.2.5.3.1.6.3ScalarhzCpEnetAggLcRxFramesOKread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated port ingress frames.
1.3.6.1.4.1.7262.2.5.3.1.6.4ScalarhzCpEnetAggLcRxBytesOKread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated port ingress bytes.
1.3.6.1.4.1.7262.2.5.3.1.6.5ScalarhzCpEnetAggLcRxFramesLengthErrorread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to length error.
1.3.6.1.4.1.7262.2.5.3.1.6.6ScalarhzCpEnetAggLcRxFramesCrcErrorread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to CRC error.
1.3.6.1.4.1.7262.2.5.3.1.6.7ScalarhzCpEnetAggLcRxFramesDropsread-onlycurrentA low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to an error.
1.3.6.1.4.1.7262.2.5.3.1.6.8ScalarhzCpEnetAggLcBWUtilizationread-onlycurrentA low capacity 32-bit counter representing the carried load over link capacity for port.
1.3.6.1.4.1.7262.2.5.3.1.6.9ScalarhzCpEnetAggLcIngressDataRateread-onlycurrentA low capacity 32-bit counter representing the data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 …
1.3.6.1.4.1.7262.2.5.3.1.6.10ScalarhzCpEnetAggLcEgressDataRateread-onlycurrentA low capacity 32-bit counter representing the data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530…
1.3.6.1.4.1.7262.2.5.3.1.6.11TablehzCpEnetAggLcFramesInQueueTablenot-accessiblecurrentA table of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1RowhzCpEnetAggLcFramesInQueueEntrynot-accessiblecurrentAn entry of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.1ColumnhzCpEnetAggLcFramesInQueueIndexread-onlycurrentA unique value for each of the 8 queues.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.2ColumnhzCpEnetAggLcFramesInQueueread-onlycurrentA low capacity 32-bit counter representing the current count of frames in queues.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.3ColumnhzCpEnetAggLcFramesInQueueDiscardedread-onlycurrentA low capacity 32-bit counter representing the current count of frames received in queues that were discarded due to an error. One possible reason is lack of b…
1.3.6.1.4.1.7262.2.5.3.1.7TablehzCpEnetPortVlanTablenot-accessiblecurrentA table of enet port vlan setting.
1.3.6.1.4.1.7262.2.5.3.1.7.1RowhzCpEnetPortVlanEntrynot-accessiblecurrentAn entry of enet port vlan setting.
1.3.6.1.4.1.7262.2.5.3.1.7.1.1ColumnhzCpEnetPortVlanIndexread-onlycurrentA unique name identifying each enet port.
1.3.6.1.4.1.7262.2.5.3.1.7.1.2ColumnhzCpEnetPortDefaultVlanIdread-writecurrentIndicates default VLAN Tag Id (1...4095) per port.
1.3.6.1.4.1.7262.2.5.3.1.7.1.3ColumnhzCpEnetPortDefaultVlanPriorityread-writecurrentIndicated default VLAN tagging priority (0...7) per port.
1.3.6.1.4.1.7262.2.5.4NodehzCpWirelessInterface
1.3.6.1.4.1.7262.2.5.4.1NodehzCpWirelessInterfaceNames
1.3.6.1.4.1.7262.2.5.4.1.1TablehzCpWirelessInterfaceNameTablenot-accessiblecurrentA table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.4.1.1.1RowhzCpWirelessInterfaceNameEntrynot-accessiblecurrentAn entry of Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.1.1.1.1ColumnhzCpWirelessInterfaceNameIndexread-onlycurrentA unique value for each Wireless Interface.
1.3.6.1.4.1.7262.2.5.4.1.1.1.2ColumnhzCpWirelessInterfaceNameread-onlycurrentDescribes the functionality of the Wireless Interface.
1.3.6.1.4.1.7262.2.5.4.2NodehzCpWirelessInterfaceModems
1.3.6.1.4.1.7262.2.5.4.2.1TablehzCpModemTablenot-accessiblecurrentA table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.4.2.1.1RowhzCpModemEntrynot-accessiblecurrentAn entry of Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.1.1.1ColumnhzCpModemIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.4.2.1.1.2ColumnhzCpModemOperStatusread-onlycurrentThe current operational state of the interface. Testing indicates that no operational packets can be passed.
1.3.6.1.4.1.7262.2.5.4.2.1.1.3ColumnhzCpModemChannelizedRSLread-onlycurrentAn estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For exampl…
1.3.6.1.4.1.7262.2.5.4.2.1.1.4ColumnhzCpModemChannelizedRSLUnsignedIntread-onlycurrentThe absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the un…
1.3.6.1.4.1.7262.2.5.4.2.1.1.5ColumnhzCpModemModulationTyperead-onlycurrentThe modulation type of the modem, distinguished according to the physical/link protocol.
1.3.6.1.4.1.7262.2.5.4.2.1.1.6ColumnhzCpModemRxSpeedread-onlycurrentAn estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps
1.3.6.1.4.1.7262.2.5.4.2.1.1.7ColumnhzCpModemTxSpeedread-onlycurrentAn estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps
1.3.6.1.4.1.7262.2.5.4.2.1.1.8ColumnhzCpModemSNRread-onlycurrentSNR value in dB. Divide the value by 10 to get the actual SNR.
1.3.6.1.4.1.7262.2.5.4.2.1.1.9ColumnhzCpModemEbToNoiseRatioread-onlycurrentThe ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio
1.3.6.1.4.1.7262.2.5.4.2.1.1.10ColumnhzCpModemEqualizerStressread-onlycurrentIndicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.
1.3.6.1.4.1.7262.2.5.4.2.2TablehzCpWirelessPortStatsTablenot-accessiblecurrentA table of Wireless Interface Modem Statistics
1.3.6.1.4.1.7262.2.5.4.2.2.1RowhzCpWirelessPortStatsEntrynot-accessiblecurrentStatistics for a Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.2.1.1ColumnhzCpWirelessPortStatsIndexread-onlycurrentA unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless…
1.3.6.1.4.1.7262.2.5.4.2.2.1.2ColumnhzCpWirelessPortTxBlocksread-onlycurrentThe current count of Modem blocks transmitted.
1.3.6.1.4.1.7262.2.5.4.2.2.1.3ColumnhzCpWirelessPortRxBlocksOKsread-onlycurrentThe current count of Modem blocks received.
1.3.6.1.4.1.7262.2.5.4.2.2.1.4ColumnhzCpWirelessPortRxBlocksErrorsread-onlycurrentThe current count of Modem blocks received in error.
1.3.6.1.4.1.7262.2.5.4.2.3NodehzCpWirelessAggregateStats
1.3.6.1.4.1.7262.2.5.4.2.3.1ScalarhzCpWirelessAggTxFramesread-onlycurrentThe current count of Ethernet Combiner frames sent.
1.3.6.1.4.1.7262.2.5.4.2.3.2ScalarhzCpWirelessAggRxFramesOKread-onlycurrentThe current count of good Ethernet Combiner frames received.
1.3.6.1.4.1.7262.2.5.4.2.3.3ScalarhzCpWirelessAggRxFramesErrorsread-onlycurrentThe current count of Ethernet Combiner frames received in error.
1.3.6.1.4.1.7262.2.5.4.2.3.4ScalarhzCpWirelessAggRxFramesDiscardsread-onlycurrentThe current count of Ethernet Combiner frames in the queue that were discarded.
1.3.6.1.4.1.7262.2.5.4.2.4TablehzCpWirelessPortLcStatsTablenot-accessiblecurrentA table of Wireless Interface Modem Statistics
1.3.6.1.4.1.7262.2.5.4.2.4.1RowhzCpWirelessPortLcStatsEntrynot-accessiblecurrentStatistics for a Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.4.1.1ColumnhzCpWirelessPortLcStatsIndexread-onlycurrentA unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless…
1.3.6.1.4.1.7262.2.5.4.2.4.1.2ColumnhzCpWirelessPortLcTxBlocksread-onlycurrentA low capacity 32-bit counter representing the current count of Modem blocks transmitted.
1.3.6.1.4.1.7262.2.5.4.2.4.1.3ColumnhzCpWirelessPortLcRxBlocksOKsread-onlycurrentA low capacity 32-bit counter representing the current count of Modem blocks received.
1.3.6.1.4.1.7262.2.5.4.2.4.1.4ColumnhzCpWirelessPortLcRxBlocksErrorsread-onlycurrentA low capacity 32-bit counter representing the current count of Modem blocks received in error.
1.3.6.1.4.1.7262.2.5.4.2.5NodehzCpWirelessAggregateLcStats
1.3.6.1.4.1.7262.2.5.4.2.5.1ScalarhzCpWirelessAggLcTxFramesread-onlycurrentA low capacity 32-bit counter representing the current count of Ethernet Combiner frames sent.
1.3.6.1.4.1.7262.2.5.4.2.5.2ScalarhzCpWirelessAggLcRxFramesOKread-onlycurrentA low capacity 32-bit counter representing the current count of good Ethernet Combiner frames received.
1.3.6.1.4.1.7262.2.5.4.2.5.3ScalarhzCpWirelessAggLcRxFramesErrorsread-onlycurrentA low capacity 32-bit counter representing the current count of Ethernet Combiner frames received in error.
1.3.6.1.4.1.7262.2.5.4.2.5.4ScalarhzCpWirelessAggLcRxFramesDiscardsread-onlycurrentA low capacity 32-bit counter representing the current count of Ethernet Combiner frames in the queue that were discarded.
1.3.6.1.4.1.7262.2.5.4.4NodehzCpWirelessInterfaceRadios
1.3.6.1.4.1.7262.2.5.4.4.1TablehzCpRadioTablenot-accessiblecurrentA table of Wireless Interface Radios
1.3.6.1.4.1.7262.2.5.4.4.1.1RowhzCpRadioEntrynot-accessiblecurrentAn entry of Wireless Interface Radio
1.3.6.1.4.1.7262.2.5.4.4.1.1.1ColumnhzCpRadioIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.4.4.1.1.2ColumnhzCpRadioDescriptionread-onlycurrentA textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the …
1.3.6.1.4.1.7262.2.5.4.4.1.1.3ColumnhzCpRadioOperStatusread-onlycurrentThe current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may…
1.3.6.1.4.1.7262.2.5.4.4.1.1.4ColumnhzCpRadioTxGainread-onlycurrentThe gain of the radio in the transmit chain. Indicates the gain in dB.
1.3.6.1.4.1.7262.2.5.4.4.1.1.5ColumnhzCpRadioRxGainread-onlycurrentThe gain of the radio in the receive chain. Indicates the gain in dB.
1.3.6.1.4.1.7262.2.5.4.4.1.1.6ColumnhzCpRadioResetread-writecurrentWriting 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be pol…
1.3.6.1.4.1.7262.2.5.4.4.1.1.7ColumnhzCpRadioTransmitPowerdBmread-writecurrentThis defines the programmed transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. Notes: - If HAAM is en…
1.3.6.1.4.1.7262.2.5.4.4.1.1.8ColumnhzCpRadioPowerOptionread-onlycurrentThis indicates the power option of the radio: normal or high power.
1.3.6.1.4.1.7262.2.5.4.4.1.1.9ColumnhzCpRadioTxStateread-writecurrentThis indicates the power option of the radio: normal or high power.
1.3.6.1.4.1.7262.2.5.4.4.1.1.10ColumnhzCpRadioActualTxStateread-onlycurrentThis defines the actual transmit state of the radio.
1.3.6.1.4.1.7262.2.5.4.4.1.1.11ColumnhzCpRadioTemperatureread-onlycurrentThe Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius.
1.3.6.1.4.1.7262.2.5.4.4.1.1.12ColumnhzCpRadioMaxTransmitPowerdBmread-onlycurrentThe maximum Transmit Power allowed.
1.3.6.1.4.1.7262.2.5.4.4.1.1.13ColumnhzCpRadioActualTransmitPowerdBmread-onlycurrentThis defines the actual transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. This value will be undefin…
1.3.6.1.4.1.7262.2.5.4.5NodehzCpWirelessInterfaceRadioFrequencies
1.3.6.1.4.1.7262.2.5.4.5.1NodehzCpWirelessInterfaceRadio1Frequencies
1.3.6.1.4.1.7262.2.5.4.5.1.1ScalarhzCpRadio1FreqGroupSelectedread-onlycurrentThe frequency group selected for Radio 1. The frequency subbands are divided into frequency groups txHigh and txLow. A system must have one node configured to …
1.3.6.1.4.1.7262.2.5.4.5.1.2TablehzCpRadio1BandTablenot-accessiblecurrentA table of radio bands for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which ma…
1.3.6.1.4.1.7262.2.5.4.5.1.2.1RowhzCpRadio1BandEntrynot-accessiblecurrentA radio band entry containing all the radio band values
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.1ColumnhzCpRadio1BandIndexread-onlycurrentA unique value for each radio band.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.2ColumnhzCpRadio1BandIdread-onlycurrentradio band ID. Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.3ColumnhzCpRadio1BandNameread-onlycurrentThe radio band name.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.4ColumnhzCpRadio1BandProgrammedread-writecurrentSpecifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.
1.3.6.1.4.1.7262.2.5.4.5.1.3TablehzCpRadio1FreqTablenot-accessiblecurrentA table of txHigh frequency settings for Radio 1
1.3.6.1.4.1.7262.2.5.4.5.1.3.1RowhzCpRadio1FreqEntrynot-accessiblecurrentA TX-High or TX-Low Frequency entry containing all the frequency values
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.1ColumnhzCpRadio1FreqIndexread-onlycurrentA unique value for each frequency channel.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.2ColumnhzCpRadio1FreqChannelIndexread-onlycurrentThe channel index for the frequency.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.3ColumnhzCpRadio1FreqTransmitRfFrequencyread-onlycurrentThe RF TX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.4ColumnhzCpRadio1FreqReceiveRfFrequencyread-onlycurrentThe RF RX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.5ColumnhzCpRadio1FreqProgrammedread-writecurrentSpecifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
1.3.6.1.4.1.7262.2.5.4.5.1.4NodehzCpRadio1ProgrammedFrequency
1.3.6.1.4.1.7262.2.5.4.5.1.4.1ScalarhzCpRadio1ProgrammedFrequencyChannelread-onlycurrentThe channel that has been programmed for Radio 1.
1.3.6.1.4.1.7262.2.5.4.5.1.4.2ScalarhzCpRadio1ProgrammedFrequencyTxRfread-onlycurrentThe programmed RF TX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.4.3ScalarhzCpRadio1ProgrammedFrequencyRxRfread-onlycurrentThe RF RX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.2TablehzCpSystemModeTablenot-accessiblecurrentA table of system mode settings. Radio Band needs to be configured before the system mode.
1.3.6.1.4.1.7262.2.5.4.5.2.1RowhzCpSystemModeEntrynot-accessiblecurrentA system mode entry containing all the system mode values
1.3.6.1.4.1.7262.2.5.4.5.2.1.1ColumnhzCpSystemModeIndexread-onlycurrentA unique value for each system mode.
1.3.6.1.4.1.7262.2.5.4.5.2.1.2ColumnhzCpSystemModeIdread-onlycurrentSystem mode Id.
1.3.6.1.4.1.7262.2.5.4.5.2.1.3ColumnhzCpSystemModeNameread-onlycurrentThe system mode name.
1.3.6.1.4.1.7262.2.5.4.5.2.1.4ColumnhzCpSystemModeProgrammedread-writecurrentSpecifies the operating system mode for the modem. Notes: Set Radio Band before System Mode Only 1 index may be selected. Changing this option might require a …
1.3.6.1.4.1.7262.2.5.4.5.3ScalarhzCpApplyFrequencyChangesToSystemread-writecurrentIf system allows, setting this oid applies the radio band, system mode and frequency changes dynamilcally and a system reset can be avoided.
1.3.6.1.4.1.7262.2.5.4.6NodehzCpWirelessInterfaceAntenna
1.3.6.1.4.1.7262.2.5.4.6.1ScalarhzCpAntennaDiameterread-onlycurrentThis defines the diameter of the antenna represented in inches.
1.3.6.1.4.1.7262.2.5.4.6.2ScalarhzCpAntennaTiltread-onlycurrentThis defines the position of the antenna for radio 1.
1.3.6.1.4.1.7262.2.5.5NodehzCpAlarms
1.3.6.1.4.1.7262.2.5.5.1NodehzCpThresholdAlarmConfig
1.3.6.1.4.1.7262.2.5.5.1.1NodehzCpAggregatedThresholdAlarm
1.3.6.1.4.1.7262.2.5.5.1.1.1ScalarhzCpDroppedFramesThresholdParamsread-writecurrentThe threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is a…
1.3.6.1.4.1.7262.2.5.5.1.1.2ScalarhzCpBwUtilizationThresholdParamsread-writecurrentThe percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the form…
1.3.6.1.4.1.7262.2.5.5.1.2NodehzCpQBasedThresholdAlarm
1.3.6.1.4.1.7262.2.5.5.1.2.1TablehzCpQBasedThresholdAlarmTablenot-accessiblecurrentA table of Q based Threshold Alarm settings
1.3.6.1.4.1.7262.2.5.5.1.2.1.1RowhzCpQBasedThresholdAlarmEntrynot-accessiblecurrentAn entry based queues.
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.1ColumnhzCpQBasedThresholdIndexread-onlycurrentA unique identifier for one of the 8 queues
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.2ColumnhzCpQBasedDepthThresholdParamsread-writecurrentThe threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is a…
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.3ColumnhzCpQBasedDroppedFramesThresholdParamsread-writecurrentThe threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is a…
1.3.6.1.4.1.7262.2.5.5.1.3TablehzCpWirelessInterfaceThresholdAlarmTablenot-accessiblecurrentA table of wireless threshold crossing alarms
1.3.6.1.4.1.7262.2.5.5.1.3.1RowhzCpWirelessInterfaceThresholdAlarmEntrynot-accessiblecurrentAn entry of wireless threshold crossing alarm
1.3.6.1.4.1.7262.2.5.5.1.3.1.1ColumnhzCpWirelessInterfaceThresholdAlarmIndexread-onlycurrentA unique identifier for each wireless port
1.3.6.1.4.1.7262.2.5.5.1.3.1.2ColumnhzCpWirelessInterfaceRslThresholdParamsread-writecurrentA read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows:…
1.3.6.1.4.1.7262.2.5.5.1.3.1.3ColumnhzCpWirelessInterfaceSnrThresholdread-writecurrentA read-write string specifing the modem SNR threshold.
1.3.6.1.4.1.7262.2.5.5.2TablehzCpAlarmConfigTablenot-accessiblecurrentA table of alarm configuration
1.3.6.1.4.1.7262.2.5.5.2.1RowhzCpAlarmConfigEntrynot-accessiblecurrentAn entry of alarm configuration
1.3.6.1.4.1.7262.2.5.5.2.1.1ColumnhzCpAlarmConfigIndexread-onlycurrentA unique value for each alarm.
1.3.6.1.4.1.7262.2.5.5.2.1.2ColumnhzCpAlarmInstanceIndexread-onlycurrentA unique value for each instance of an alarm.
1.3.6.1.4.1.7262.2.5.5.2.1.3ColumnhzCpAlarmConfigSeverityread-writecurrentThe severity of the alarm as minor, major or critical.
1.3.6.1.4.1.7262.2.5.5.2.1.4ColumnhzCpAlarmConfigStateread-writecurrentThe state of the alarm which can be either enabled or disabled.
1.3.6.1.4.1.7262.2.5.5.3TablehzCpAlarmStatusTablenot-accessiblecurrentA table of alarm status
1.3.6.1.4.1.7262.2.5.5.3.1RowhzCpAlarmStatusEntrynot-accessiblecurrentAn entry of alarm status
1.3.6.1.4.1.7262.2.5.5.3.1.1ColumnhzCpAlarmStatusIndexread-onlycurrentA unique value for each alarm.
1.3.6.1.4.1.7262.2.5.5.3.1.2ColumnhzCpAlarmStatusInstanceIndexread-onlycurrentA unique value for each instance of an alarm.
1.3.6.1.4.1.7262.2.5.5.3.1.3ColumnhzCpAlarmStatusread-onlycurrentIndicates whether the alarm exists or not.
1.3.6.1.4.1.7262.2.5.5.3.1.4ColumnhzCpAlarmRaisedDateAndTimeread-onlycurrentSpecifies the date and time when the alarm was raised. If the alarm never occured, the value shows as zero.
1.3.6.1.4.1.7262.2.5.5.3.1.5ColumnhzCpAlarmClearedDateAndTimeread-onlycurrentSpecifies the date and time when the alarm was cleared. If the alarm never occured, the value shows as zero.
1.3.6.1.4.1.7262.2.5.6NodehzCpQos
1.3.6.1.4.1.7262.2.5.6.1ScalarhzCpQosEnableread-writecurrentIndicates whether QOS is enabled.
1.3.6.1.4.1.7262.2.5.6.2ScalarhzCpCosTyperead-writecurrentIndicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN ta…
1.3.6.1.4.1.7262.2.5.6.3ScalarhzCpCosQinQiTagread-writecurrentSets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100.
1.3.6.1.4.1.7262.2.5.6.4ScalarhzCpCosQinQoTagread-writecurrentSets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100.
1.3.6.1.4.1.7262.2.5.6.5ScalarhzCpCosExpediteQueueread-writecurrentThis sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b…
1.3.6.1.4.1.7262.2.5.6.6ScalarhzCpCosQueueCIRread-writecurrentCommitted Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled a…
1.3.6.1.4.1.7262.2.5.6.7ScalarhzCpCosQueueCBSread-writecurrentComitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Mini…
1.3.6.1.4.1.7262.2.5.6.8ScalarhzCpQosPolicyread-writecurrentSets the Qos policy.
1.3.6.1.4.1.7262.2.5.6.9ScalarhzCpCosWfqWeightread-writecurrentThe weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the queues proportional to their weight. The weights have values …
1.3.6.1.4.1.7262.2.5.6.10ScalarhzCpCosNumPriorityQueuesread-writecurrentWhen expedite queue is enabled, user can set the number of priority queues. The default value for number of priority queues are 2, maximum is 4 and minimum is …
1.3.6.1.4.1.7262.2.5.6.11ScalarhzCpCosCutThroughQueueread-writecurrentCut through queue can be enabled or disabled. Any one of the 8 queues can be selected as cut through queue.
1.3.6.1.4.1.7262.2.5.6.12TablehzCpQosPortConfigTablenot-accessiblecurrentA table of Qos Settings per port
1.3.6.1.4.1.7262.2.5.6.12.1RowhzCpQosPortConfigEntrynot-accessiblecurrentAn entry of Qos setting per port
1.3.6.1.4.1.7262.2.5.6.12.1.1ColumnhzCpCosPortIndexread-onlycurrentA unique name identifying each enet port
1.3.6.1.4.1.7262.2.5.6.12.1.2ColumnhzCpCosQueueMappingread-writecurrentUser queue assignments for CoS values 0 to 7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 i…
1.3.6.1.4.1.7262.2.5.6.12.1.3ColumnhzCpCosDefaultValueread-writecurrentDefault CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag.
1.3.6.1.4.1.7262.2.5.6.13TablehzCpCosUserFlowDepTablenot-accessibledeprecatedA table of Cos user flow setting
1.3.6.1.4.1.7262.2.5.6.13.1RowhzCpCosUserFlowDepEntrynot-accessibledeprecatedAn entry of Cos user flow setting
1.3.6.1.4.1.7262.2.5.6.13.1.1ColumnhzCpCosUserFlowIndexDepread-onlydeprecatedThis object is deprecated by hzCpCosUserFlowMappingIndex.
1.3.6.1.4.1.7262.2.5.6.13.1.2ColumnhzCpCosUserFlowStateDepread-onlydeprecatedThis object is deprecated by entries in hzCpCosUserFlowMappingTable.
1.3.6.1.4.1.7262.2.5.6.14TablehzCpCosUserClassTablenot-accessiblecurrentA table of Cos user class setting.
1.3.6.1.4.1.7262.2.5.6.14.1RowhzCpCosUserClassEntrynot-accessiblecurrentAn entry of Cos user class setting.
1.3.6.1.4.1.7262.2.5.6.14.1.1ColumnhzCpCosUserClassIndexread-onlycurrentA unique name specifying user class group.
1.3.6.1.4.1.7262.2.5.6.14.1.2ColumnhzCpCosUserClassOffsetread-writecurrentSpecifies the user class offset. The valid range is 0-31.
1.3.6.1.4.1.7262.2.5.6.14.1.3ColumnhzCpCosUserClassValueread-writecurrentA string specifying the user class value in hex format. The string must hold even number of characters.
1.3.6.1.4.1.7262.2.5.6.14.1.4ColumnhzCpCosUserClassMaskread-writecurrentA string specifying the user class mask in hex format. The string must hold even number of characters and have the same length as the user class value.
1.3.6.1.4.1.7262.2.5.6.15TablehzCpCosUserFlowFilterTablenot-accessiblecurrentA table of Cos user flow filter setting.
1.3.6.1.4.1.7262.2.5.6.15.1RowhzCpCosUserFlowFilterEntrynot-accessiblecurrentAn entry of Cos user flow filter setting.
1.3.6.1.4.1.7262.2.5.6.15.1.1ColumnhzCpCosUserFlowFilterIndexread-onlycurrentA unique name specifying user flow group.
1.3.6.1.4.1.7262.2.5.6.15.1.2ColumnhzCpCosUserFlowFilterread-writecurrentA string specifying the user class combination. For example a user flow can be configured to include c1 c5. If a user class hasn't been assigned a value and ma…
1.3.6.1.4.1.7262.2.5.6.16TablehzCpCosUserFlowMappingTablenot-accessiblecurrentA table of Cos user flow mapping setting.
1.3.6.1.4.1.7262.2.5.6.16.1RowhzCpCosUserFlowMappingEntrynot-accessiblecurrentAn entry of Cos user flow mapping setting.
1.3.6.1.4.1.7262.2.5.6.16.1.1ColumnhzCpCosUserFlowMappingIndexread-onlycurrentA unique name specifying user flow group.
1.3.6.1.4.1.7262.2.5.6.16.1.2ColumnhzCpCosUserFlowEnableread-writecurrentEnables or disables a CoS user flow.
1.3.6.1.4.1.7262.2.5.6.16.1.3ColumnhzCpCosUserFlowP1Queueread-writecurrentSpecifies the selected queue for P1.
1.3.6.1.4.1.7262.2.5.6.16.1.4ColumnhzCpCosUserFlowP1TargetPortread-writecurrentSpecifies the target egress port for P1.
1.3.6.1.4.1.7262.2.5.6.16.1.5ColumnhzCpCosUserFlowP2Queueread-writecurrentSpecifies the selected queue for P2.
1.3.6.1.4.1.7262.2.5.6.16.1.6ColumnhzCpCosUserFlowP2TargetPortread-writecurrentSpecifies the target egress port for P2.
1.3.6.1.4.1.7262.2.5.6.16.1.7ColumnhzCpCosUserFlowP3Queueread-writecurrentSpecifies the selected queue for P3.
1.3.6.1.4.1.7262.2.5.6.16.1.8ColumnhzCpCosUserFlowP3TargetPortread-writecurrentSpecifies the target egress port for P3.
1.3.6.1.4.1.7262.2.5.6.16.1.9ColumnhzCpCosUserFlowP4Queueread-writecurrentSpecifies the selected queue for P4.
1.3.6.1.4.1.7262.2.5.6.16.1.10ColumnhzCpCosUserFlowP4TargetPortread-writecurrentSpecifies the target egress port for P4.
1.3.6.1.4.1.7262.2.5.7NodehzCpRapidLinkShutdown
1.3.6.1.4.1.7262.2.5.7.1ScalarhzCpRlsModeread-writecurrentOff, when the RLS feature is disabled. Basic when the feature is enabled but hard fault monitor is disabled. Advanced when the feature is enabled and hard faul…
1.3.6.1.4.1.7262.2.5.7.2ScalarhzCpRlsLinkControlread-writecurrentReturns RLS user control for re-enabling failed link. If manual, then user has to explicitly enable the link.
1.3.6.1.4.1.7262.2.5.7.3ScalarhzCpApplyRlsMonitorParametersToSystemread-writecurrentThis writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'.
1.3.6.1.4.1.7262.2.5.7.4ScalarhzCpRlsLinkEnableread-writecurrentReturns RLS global link enable status as on or off. If off, the link will be shutdown.
1.3.6.1.4.1.7262.2.5.7.5ScalarhzCpRlsPortGroupread-writecurrentSpecifies the RLS port group configuration setting. Options are the port list and any/all. For example: p1,p3 any - RLS will trigger if either p1 or p3 is down…
1.3.6.1.4.1.7262.2.5.7.6ScalarhzCpRlsShutdownPolicyread-writecurrentIndicated whether to shutdown the port or send an EOAM message when RLS is triggered.
1.3.6.1.4.1.7262.2.5.7.7TablehzCpRlsSoftFaultMonitorTablenot-accessiblecurrentA table of RLS Soft Fault Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.7.1RowhzCpRlsSoftFaultMonitorEntrynot-accessiblecurrentRLS Parameters for Soft Fault Monitoring
1.3.6.1.4.1.7262.2.5.7.7.1.1ColumnhzCpRlsSoftFaultMonitorIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.7.1.2ColumnhzCpRlsEstablishErredFrameThresholdread-writecurrentMaximum erred blocks, per sample, allowed for link establishment.
1.3.6.1.4.1.7262.2.5.7.7.1.3ColumnhzCpRlsShutdownErredFrameThresholdread-writecurrentMinimum erred blocks, per sample, allowed before link shutdown.
1.3.6.1.4.1.7262.2.5.7.7.1.4ColumnhzCpRlsEstablishNumberOfSamplesread-writecurrentMinimum number of consecutive good samples required before link is established.
1.3.6.1.4.1.7262.2.5.7.7.1.5ColumnhzCpRlsShutdownNumberOfSamplesread-writecurrentMinimum number of consecutive erred samples before link is shutdown.
1.3.6.1.4.1.7262.2.5.7.7.1.6ColumnhzCpRlsEstablishSamplePeriodread-writecurrentPeriod of Time, in milliseconds, for monitoring Establish Erred Frame Threshold.
1.3.6.1.4.1.7262.2.5.7.7.1.7ColumnhzCpRlsShutdownSamplePeriodread-writecurrentPeriod of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold.
1.3.6.1.4.1.7262.2.5.7.7.1.8ColumnhzCpRlsQuickShutdownSamplePeriodread-writecurrentMinimum number of milliseconds required to classify samples as erred.
1.3.6.1.4.1.7262.2.5.7.8TablehzCpRlsHardFaultMonitorTablenot-accessiblecurrentA table of RLS Hard Fault Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.8.1RowhzCpRlsHardFaultMonitorEntrynot-accessiblecurrentRLS Parameters for Hard Fault Monitoring
1.3.6.1.4.1.7262.2.5.7.8.1.1ColumnhzCpRlsHardFaultMonitorIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.8.1.2ColumnhzCpRlsHardFaultSamplePeriodread-writecurrentThe period of time, in milliseconds, for which the rlsFaultThreshold is applied.
1.3.6.1.4.1.7262.2.5.7.8.1.3ColumnhzCpRlsHardFaultThresholdread-writecurrentThe percentage of the rlsFaultSamplePeriodMilliSeconds period which must be degraded before the link is set to the 'impaired' state.
1.3.6.1.4.1.7262.2.5.7.9TablehzCpRlsReceiveSignalLevelMonitorTablenot-accessiblecurrentA table of RLS RSL Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.9.1RowhzCpRlsReceiveSignalLevelMonitorEntrynot-accessiblecurrentRLS RSL Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.9.1.1ColumnhzCpRlsReceiveSignalLevelMonitorIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.9.1.2ColumnhzCpRlsMakeRslMonitorRslValueread-writecurrentThe RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active.
1.3.6.1.4.1.7262.2.5.7.9.1.3ColumnhzCpRlsMakeRslMonitorPeriodread-writecurrentThe desired period, in seconds. When Link is inactive and if RSL is higher than the desiredthreshold for this period, the link will become active.
1.3.6.1.4.1.7262.2.5.7.10TablehzCpRlsStatusTablenot-accessiblecurrentA table of RLS Parameters and states
1.3.6.1.4.1.7262.2.5.7.10.1RowhzCpRlsStatusEntrynot-accessiblecurrentRLS Parameters and states
1.3.6.1.4.1.7262.2.5.7.10.1.1ColumnhzCpRlsStatusIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.10.1.2ColumnhzCpRlsOptionread-onlycurrentRLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; Off: Entire RLS feature disabled.
1.3.6.1.4.1.7262.2.5.7.10.1.3ColumnhzCpRlsStateread-onlycurrentRapid Link Shutdown State. If the state is activated, that means link is down; If the state is inactivated, that means that link is up.
1.3.6.1.4.1.7262.2.5.7.10.1.4ColumnhzCpRlsMismatchStateread-onlycurrentRLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matche…
1.3.6.1.4.1.7262.2.5.7.10.1.5ColumnhzCpRlsDegradeMonitorStateread-onlycurrentDegrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade…
1.3.6.1.4.1.7262.2.5.7.10.1.6ColumnhzCpRlsHardFaultMonitorStateread-onlycurrentHard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard …
1.3.6.1.4.1.7262.2.5.7.10.1.7ColumnhzCpRlsMakeRslThresholdStateread-onlycurrentMake RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal …
1.3.6.1.4.1.7262.2.5.7.10.1.8ColumnhzCpRlsPeerRslStateread-onlycurrentPeer RSL State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS.
1.3.6.1.4.1.7262.2.5.7.10.1.9ColumnhzCpRlsRadioInterfaceStateread-onlycurrentRadio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that me…
1.3.6.1.4.1.7262.2.5.7.10.1.10ColumnhzCpRlsNetworkInterfaceStateread-onlycurrentNetwork Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state i…
1.3.6.1.4.1.7262.2.5.7.10.1.11ColumnhzCpRlsUserConfiguredEstablishFerread-onlycurrentUser Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.12ColumnhzCpRlsMinimumAchievableEstablishFerread-onlycurrentMinimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.13ColumnhzCpRlsUserConfiguredShutdownFerread-onlycurrentUser Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.14ColumnhzCpRlsMinimumAchievableShutdownFerread-onlycurrentMinimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.15ColumnhzCpRlsUserConfiguredEstablishMonitorTimeread-onlycurrentUser Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user
1.3.6.1.4.1.7262.2.5.7.10.1.16ColumnhzCpRlsActualEstablishMonitorTimeread-onlycurrentActual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER'must be achieved to bring link into service, it's a multiple of th…
1.3.6.1.4.1.7262.2.5.7.10.1.17ColumnhzCpRlsUserConfiguredShutdownMonitorTimeread-onlycurrentUser Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user.
1.3.6.1.4.1.7262.2.5.7.10.1.18ColumnhzCpRlsActualShutdownMonitorTimeread-onlycurrentActual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of t…
1.3.6.1.4.1.7262.2.5.8NodehzCpLogs
1.3.6.1.4.1.7262.2.5.8.1ScalarhzCpEventLogEnableread-writecurrentIndicates whether event log is enabled.
1.3.6.1.4.1.7262.2.5.8.2ScalarhzCpPerfmLogEnableread-writecurrentIndicates whether performance log is enabled.
1.3.6.1.4.1.7262.2.5.8.3ScalarhzCpPerfmLogIntervalread-writecurrentPerformance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds).
1.3.6.1.4.1.7262.2.5.8.4NodehzCpSysLog
1.3.6.1.4.1.7262.2.5.8.4.1ScalarhzCpSysLogEnableread-writecurrentIndicates whether sys log is enabled.
1.3.6.1.4.1.7262.2.5.8.4.2ScalarhzCpSysLogIpAddressDepread-onlydeprecatedIndicates the IP address of sys log. This object is deprecated by hzCpSysLogHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.8.4.3ScalarhzCpSysLogHostDomainread-writecurrentIndicates sys log host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.8.4.4ScalarhzCpSysLogHostAddressread-writecurrentIndicates sys log host inet address octet string. This object deprecates hzCpSysLogIpAddressDep.
1.3.6.1.4.1.7262.2.5.9NodehzCpAtpc
1.3.6.1.4.1.7262.2.5.9.1ScalarhzCpAtpcEnableread-writecurrentIndicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled.
1.3.6.1.4.1.7262.2.5.9.2ScalarhzCpAtpcStatusread-onlycurrentIndicates the actual condition of ATPC: disabled Configuration is set to off. disabledAuto Feature was automatically disabled and is transmitting at coordinate…
1.3.6.1.4.1.7262.2.5.9.3ScalarhzCpAtpcCoordinatedPowerDbmread-writecurrentThis value is the coordinated power offset from the configured transmit power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dBm.
1.3.6.1.4.1.7262.2.5.9.4ScalarhzCpAtpcCoordinatedPwrEnableread-writecurrentIndicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled.
1.3.6.1.4.1.7262.2.5.9.5ScalarhzCpAtpcMinTxPowerread-writecurrentSets the minimum ATPC transmit power in dBm x 10. Valid range -990..100.
1.3.6.1.4.1.7262.2.5.9.6ScalarhzCpAtpcMaxTxPowerread-writecurrentSets the maximum ATPC transmit power in dBm x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
1.3.6.1.4.1.7262.2.5.10NodehzCpHitlessAam
1.3.6.1.4.1.7262.2.5.10.1ScalarhzCpHitlessAamEnableread-writecurrentRead or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'.
1.3.6.1.4.1.7262.2.5.10.2ScalarhzCpHitlessAamManualModeread-writecurrentRead or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'.
1.3.6.1.4.1.7262.2.5.10.3ScalarhzCpHitlessAamWaitToRestoreread-writecurrentRead or set the Hitless Automatic Adaptive Modulation (HAAM) wait to restore duration time in seconds.
1.3.6.1.4.1.7262.2.5.10.4ScalarhzCpHitlessAamOrgSpecEoamMsgread-writecurrentTurns on or off the Hitless Automatic Adaptive Modulation (HAAM) Organizational Specific EOAM message to peer.
1.3.6.1.4.1.7262.2.5.10.5TablehzCpHitlessAamTablenot-accessiblecurrentA table of Hitless Aam.
1.3.6.1.4.1.7262.2.5.10.5.1RowhzCpHitlessAamEntrynot-accessiblecurrentHitless Aam Status and Configurations.
1.3.6.1.4.1.7262.2.5.10.5.1.1ColumnhzCpWirelessPortIndexread-onlycurrentA unique value for each interface.
1.3.6.1.4.1.7262.2.5.10.5.1.2ColumnhzCpHitlessAamCurrentModeread-onlycurrentA read-only string specifing the currently running Hitless AAM Mode.
1.3.6.1.4.1.7262.2.5.10.6TablehzCpHitlessAamModeTablenot-accessiblecurrentA table of HitlessAam available modes.
1.3.6.1.4.1.7262.2.5.10.6.1RowhzCpHitlessAamModeEntrynot-accessiblecurrentA HAAM mode entry containing all the HAAM system mode values
1.3.6.1.4.1.7262.2.5.10.6.1.1ColumnhzCpHitlessAamModeIndexread-onlycurrentA unique value for each Hitless Aam mode.
1.3.6.1.4.1.7262.2.5.10.6.1.2ColumnhzCpHitlessAammModeNameread-onlycurrentThe Hitless Aam mode name.
1.3.6.1.4.1.7262.2.5.10.6.1.3ColumnhzCpHitlessAamModeRangeread-writecurrentSpecifies the Hitless Aam available and max system mode. Only max option is allowed to be set in this release.
1.3.6.1.4.1.7262.2.5.11NodehzCpSnmpNotifications
1.3.6.1.4.1.7262.2.5.11.1NotificationhzCpLinkDowncurrentA linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
1.3.6.1.4.1.7262.2.5.11.2NotificationhzCpLinkUpcurrentA linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
1.3.6.1.4.1.7262.2.5.11.3NotificationhzCpPeerAuthenticationFailurecurrentAuthentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty…
1.3.6.1.4.1.7262.2.5.11.4NotificationhzCpPeerAuthenticationFailureClearedcurrentThe condition has cleared. The peer node is now authenticated.
1.3.6.1.4.1.7262.2.5.11.5NotificationhzCpHitlessAamConfigMisMatchcurrentHitless Automatic Adaptive modulation configuration mismatch
1.3.6.1.4.1.7262.2.5.11.6NotificationhzCpHitlessAamConfigMisMatchClearedcurrentHitless Automatic Adaptive modulation configuration mismatch cleared
1.3.6.1.4.1.7262.2.5.11.7NotificationhzCpHitlessAamModulationLoweredcurrentHitless Automatic Adaptive modulation on and system running on lowest modulation
1.3.6.1.4.1.7262.2.5.11.8NotificationhzCpHitlessAamModulationLoweredClearedcurrentHitless Automatic Adaptive modulation on system running on higher modulation
1.3.6.1.4.1.7262.2.5.11.9NotificationhzCpHitlessAamModulationChangedEventcurrentHitless Automatic Adaptive has changed modulation.
1.3.6.1.4.1.7262.2.5.11.10NotificationhzCpAtpcConfigMismatchcurrentATPC configuration mismatch in the Horizon Compact Plus systems. ATPC is enabled at one system, but disabled at the other system.
1.3.6.1.4.1.7262.2.5.11.11NotificationhzCpAtpcConfigMismatchClearedcurrentATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC.
1.3.6.1.4.1.7262.2.5.11.12NotificationhzCpAtpcAutoDisabledcurrentATPC auto-disabled (transmitting at coordinated power).
1.3.6.1.4.1.7262.2.5.11.13NotificationhzCpAtpcAutoDisabledClearedcurrentATPC has been enabled.
1.3.6.1.4.1.7262.2.5.11.14NotificationhzCpNoSntpServersReachablecurrentCan't reach any of the SNTP servers
1.3.6.1.4.1.7262.2.5.11.15NotificationhzCpNoSntpServersReachableClearedcurrentAt least one of SNTP servers is reachable
1.3.6.1.4.1.7262.2.5.11.16NotificationhzCpFrequencyFileInvalidcurrentThis trap is generated when the executing frequency file is invalid.
1.3.6.1.4.1.7262.2.5.11.17NotificationhzCpAggregateDroppedFramesThresholdcurrentThe ethernet dropped frames threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.18NotificationhzCpAggregateDroppedFramesThresholdClearedcurrentThe condition has cleared. The ethernet dropped frames threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.19NotificationhzCpQueueDroppedFramesThresholdcurrentThe ethernet queue based dropped frames threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.20NotificationhzCpQueueDroppedFramesThresholdClearedcurrentThe condition has cleared. The ethernet queue based dropped frames threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.21NotificationhzCpBwUtilizationThresholdcurrentThe ethernet bandwidth threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.22NotificationhzCpBwUtilizationThresholdClearedcurrentThe condition has cleared. The ethernet bandwidth threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.23NotificationhzCpQueueDepthThresholdcurrentThe ethernet queue depth threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.24NotificationhzCpQueueDepthThresholdClearedcurrentThe condition has cleared. The ethernet queue depth threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.25NotificationhzCpRlsConfigMismatchcurrentRLS Configuration mismatch
1.3.6.1.4.1.7262.2.5.11.26NotificationhzCpRlsConfigMismatchClearedcurrentThe condition has cleared.
1.3.6.1.4.1.7262.2.5.11.27NotificationhzCpRlsShutdownActivatedcurrentRLS shutdown activated
1.3.6.1.4.1.7262.2.5.11.28NotificationhzCpRlsShutdownActivatedClearedcurrentRLS shutdown activated condition has cleared.
1.3.6.1.4.1.7262.2.5.11.29NotificationhzCpRlsQueueBasedShutdownActivatedcurrentRLS Queue-Based shutdown is activated
1.3.6.1.4.1.7262.2.5.11.30NotificationhzCpRlsQueueBasedShutdownActivatedClearedcurrentRLS Queue-Based shutdown is not activated
1.3.6.1.4.1.7262.2.5.11.31NotificationhzCpModemRxLossOfSignalLockcurrentLoss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of acti…
1.3.6.1.4.1.7262.2.5.11.32NotificationhzCpModemRxLossOfSignalLockClearedcurrentLoss of signal lock from demodulator condition has cleared.
1.3.6.1.4.1.7262.2.5.11.33NotificationhzCpModemSnrBelowThresholdcurrentThe demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misali…
1.3.6.1.4.1.7262.2.5.11.34NotificationhzCpModemSnrBelowThresholdClearedcurrentSNR performance back to normal.
1.3.6.1.4.1.7262.2.5.11.35NotificationhzCpModemEqualizerStressThresholdcurrentEqualizer Stress measured within the demodulator exceeds the threshold value.
1.3.6.1.4.1.7262.2.5.11.36NotificationhzCpModemEqualizerStressThresholdClearedcurrentEqualizer Stress measured within the demodulator is within the threshold value.
1.3.6.1.4.1.7262.2.5.11.37NotificationhzCpRslBelowThresholdcurrentThe RSL has been detected below its minimum threshold.
1.3.6.1.4.1.7262.2.5.11.38NotificationhzCpRslBelowThresholdClearedcurrentThe condition has cleared. RSL is now above its minimum threshold.
1.3.6.1.4.1.7262.2.5.11.39NotificationhzCpRadioSynthLostLockcurrentThe PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is t…
1.3.6.1.4.1.7262.2.5.11.40NotificationhzCpRadioSynthLostLockClearedcurrentThe radio PLDRO/LO lost lock condition has cleared.
1.3.6.1.4.1.7262.2.5.11.41NotificationhzCpRadioCalTableNotAvailablecurrentTemp comp table not available.
1.3.6.1.4.1.7262.2.5.11.42NotificationhzCpRadioCalTableNotAvailableClearedcurrentCal table is now available.
1.3.6.1.4.1.7262.2.5.11.43NotificationhzCpRadioDrainCurrentOutOfLimitcurrentRadio current out of limits.
1.3.6.1.4.1.7262.2.5.11.44NotificationhzCpRadioDrainCurrentOutOfLimitClearedcurrentRadio current out of limits cleared.
1.3.6.1.4.1.7262.2.5.11.45NotificationhzCpRadioPowerAmplifiercurrentRadio power amplifier
1.3.6.1.4.1.7262.2.5.11.46NotificationhzCpRadioPowerAmplifierClearedcurrentRadio power amplifier cleared
1.3.6.1.4.1.7262.2.5.11.47NotificationhzCpTemperatureOutOfLimitcurrentRadio temperature out of limits.
1.3.6.1.4.1.7262.2.5.11.48NotificationhzCpTemperatureOutOfLimitClearedcurrentRadio temperature out of limits cleared.
1.3.6.1.4.1.7262.2.5.11.49NotificationhzCpRedundancyConfigMismatchcurrentRedundancy configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.50NotificationhzCpRedundancyConfigMismatchClearedcurrentRedundancy configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.51NotificationhzCpRedundancyActiveOnSecondarycurrentSecondary unit is processing the user traffic.
1.3.6.1.4.1.7262.2.5.11.52NotificationhzCpRedundancyActiveOnSecondaryClearedcurrentSecondary unit processing the user traffic condition is cleared.
1.3.6.1.4.1.7262.2.5.11.53NotificationhzCpRedundancyOperatingInForcedSwitchcurrentRedundancy operating in either forced-active or forced-standby switch mode.
1.3.6.1.4.1.7262.2.5.11.54NotificationhzCpRedundancyOperatingInForcedSwitchClearedcurrentRedundancy operating in either forced-active or forced-standby switch mode condition is cleared.
1.3.6.1.4.1.7262.2.5.11.55NotificationhzCpRedundancyEnetCrossLinkcurrentRedundnacy cross link.
1.3.6.1.4.1.7262.2.5.11.56NotificationhzCpRedundancyEnetCrossLinkClearedcurrentRedundancy cross link is cleared.
1.3.6.1.4.1.7262.2.5.11.57NotificationhzCpRedundancyActiveUsingPartnerWLinkcurrentNode is active but using its standby partner's radio to transport the data to the other end f the link. This alarm is raised on the active node.
1.3.6.1.4.1.7262.2.5.11.58NotificationhzCpRedundancyActiveUsingPartnerWLinkClearedcurrentActive node using partner wireless link condition is cleared.
1.3.6.1.4.1.7262.2.5.11.59NotificationhzCpRedundancyStandbyWLinkInUsecurrentThis alarm is raised on the standby node (primary or secondary) when it's radio is used by the partner node for transporting the data to the other end of the l…
1.3.6.1.4.1.7262.2.5.11.60NotificationhzCpRedundancyStandbyWLinkInUseClearedcurrentStandby node wirless link is not used by the partner any more.
1.3.6.1.4.1.7262.2.5.11.61NotificationhzCpRedundancyStandbyOnPrimarycurrentPrimary node is in standby mode.
1.3.6.1.4.1.7262.2.5.11.62NotificationhzCpRedundancyStandbyOnPrimaryClearedcurrentPrimary node in standby condition is cleared.
1.3.6.1.4.1.7262.2.5.11.63NotificationhzCpX2DeliveringHalfCapacitycurrentX2 operation is using single wireless link. System throughput is reduced to half.
1.3.6.1.4.1.7262.2.5.11.64NotificationhzCpX2DeliveringHalfCapacityClearedcurrentX2 operation is back to two wireless links.
1.3.6.1.4.1.7262.2.5.11.65NotificationhzCpBncCableSignalNotDetectedcurrentBNC signal is not detected. The cable may be disconnected.
1.3.6.1.4.1.7262.2.5.11.66NotificationhzCpBncCableSignalNotDetectedClearedcurrentBNC signal error condition is cleared.
1.3.6.1.4.1.7262.2.5.11.67NotificationhzCpEthernetSpeedReducedcurrentEthernet Speed negotiated below the Max Speed.
1.3.6.1.4.1.7262.2.5.11.68NotificationhzCpEthernetSpeedReducedClearedcurrentEthernet speed is set back to Max Speed.
1.3.6.1.4.1.7262.2.5.11.69NotificationhzCpSynceLostLockcurrentSynce clock PLL lost lock
1.3.6.1.4.1.7262.2.5.11.70NotificationhzCpSynceLostLockClearedcurrentSynce clock PLL restored from lost of lock
1.3.6.1.4.1.7262.2.5.11.71NotificationhzCpSynceSecondarySourceInUsecurrentSynce clock selected secondary source
1.3.6.1.4.1.7262.2.5.11.72NotificationhzCpSynceSecondarySourceInUseClearedcurrentSynce clock selected primary source
1.3.6.1.4.1.7262.2.5.11.73NotificationhzCpUserSessioncurrentA person has logged in to an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap.
1.3.6.1.4.1.7262.2.5.11.74NotificationhzCpUserSessionClearedcurrentA person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap.
1.3.6.1.4.1.7262.2.5.11.75NotificationhzCpInvalidSystemConfigcurrentOverall system Configuration is not valid.
1.3.6.1.4.1.7262.2.5.11.76NotificationhzCpInvalidSystemConfigClearedcurrentSystem configuration is valid.
1.3.6.1.4.1.7262.2.5.11.77NotificationhzCpMibChangeNotSavedcurrentMib has been changed but not saved.
1.3.6.1.4.1.7262.2.5.11.78NotificationhzCpMibChangeNotSavedClearedcurrentMib has been saved.
1.3.6.1.4.1.7262.2.5.11.79NotificationhzCpTransmitterLossOfSynccurrentSystem has detected an internal fault.
1.3.6.1.4.1.7262.2.5.11.80NotificationhzCpTransmitterLossOfSyncClearedcurrentInternal fault has cleared.
1.3.6.1.4.1.7262.2.5.11.81NotificationhzCpRadioLinearityCalErrorcurrentRadio linearity calibration error.
1.3.6.1.4.1.7262.2.5.11.82NotificationhzCpRadioLinearityCalErrorClearedcurrentRadio linearity calibration error is cleared.
1.3.6.1.4.1.7262.2.5.11.83NotificationhzCpSynceConfigMismatchcurrentSynce configuration mismatch with peer.
1.3.6.1.4.1.7262.2.5.11.84NotificationhzCpSynceConfigMismatchClearedcurrentSynce configuration mismatch is cleared.
1.3.6.1.4.1.7262.2.5.11.85NotificationhzCpCryptoPowerUpTestsFailedcurrentCrypto power up tests failed.
1.3.6.1.4.1.7262.2.5.11.86NotificationhzCpCryptoConfigMismatchcurrentCrypto configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.87NotificationhzCpCryptoConfigMismatchClearedcurrentCrypto configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.88NotificationhzCpSystemTimeChangecurrentSystem Date Time changed
1.3.6.1.4.1.7262.2.5.11.89NotificationhzCpCodeCheckcurrentA code check correction event has occured in the system.
1.3.6.1.4.1.7262.2.5.11.90NotificationhzCpConfigChangedcurrent
1.3.6.1.4.1.7262.2.5.1000IdentityhzCpModIdentityThis specifies the contact information and the revision tracking information for the MIB module version.