DS0-MIB
19 objects
The MIB module to describe DS0 interfaces objects.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE transmission |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.81 | Identityds0 | The MIB module to describe DS0 interfaces objects. | ||
| 1.3.6.1.2.1.10.81.1 | Tabledsx0ConfigTable | not-accessible | current | The DS0 Configuration table. |
| 1.3.6.1.2.1.10.81.1.1 | Rowdsx0ConfigEntry | not-accessible | current | An entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. |
| 1.3.6.1.2.1.10.81.1.1.1 | Columndsx0Ds0ChannelNumber | read-only | current | This object indicates the channel number of the ds0 on its DS1/E1. |
| 1.3.6.1.2.1.10.81.1.1.2 | Columndsx0RobbedBitSignalling | read-write | current | This object indicates if Robbed Bit Signalling is turned on or off for a given ds0. This only applies to DS0s on a DS1 link. For E1 links the value is always o… |
| 1.3.6.1.2.1.10.81.1.1.3 | Columndsx0CircuitIdentifier | read-write | current | This object contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.2.1.10.81.1.1.4 | Columndsx0IdleCode | read-write | current | This object contains the code transmitted in the ABCD bits when the ds0 is not connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the… |
| 1.3.6.1.2.1.10.81.1.1.5 | Columndsx0SeizedCode | read-write | current | This object contains the code transmitted in the ABCD bits when the ds0 is connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the var… |
| 1.3.6.1.2.1.10.81.1.1.6 | Columndsx0ReceivedCode | read-only | current | This object contains the code being received in the ABCD bits. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit |
| 1.3.6.1.2.1.10.81.1.1.7 | Columndsx0TransmitCodesEnable | read-write | current | This object determines if the idle and seized codes are transmitted. If the value of this object is true then the codes are transmitted. |
| 1.3.6.1.2.1.10.81.1.1.8 | Columndsx0Ds0BundleMappedIfIndex | read-only | current | This object indicates the ifIndex value assigned by the agent for the ds0Bundle(82) ifEntry to which the given ds0(81) ifEntry may belong. If the given ds0(81)… |
| 1.3.6.1.2.1.10.81.2 | Nodeds0Conformance | |||
| 1.3.6.1.2.1.10.81.2.1 | Nodeds0Groups | |||
| 1.3.6.1.2.1.10.81.2.1.1 | Groupds0ConfigGroup | current | A collection of objects providing configuration information applicable to all DS0 interfaces. | |
| 1.3.6.1.2.1.10.81.2.2 | Nodeds0Compliances | |||
| 1.3.6.1.2.1.10.81.2.2.1 | Complianceds0Compliance | read-only | current | The compliance statement for DS0 interfaces. |
| 1.3.6.1.2.1.10.81.3 | Tabledsx0ChanMappingTable | not-accessible | current | The DS0 Channel Mapping table. This table maps a DS0 channel number on a particular DS1/E1 into an ifIndex. |
| 1.3.6.1.2.1.10.81.3.1 | Rowdsx0ChanMappingEntry | not-accessible | current | An entry in the DS0 Channel Mapping table. There is an entry in this table corresponding to each ds0 ifEntry within any interface that is channelized to the in… |
| 1.3.6.1.2.1.10.81.3.1.1 | Columndsx0ChanMappedIfIndex | read-only | current | This object indicates the ifIndex value assigned by the agent for the individual ds0 ifEntry that corresponds to the given DS0 channel number (specified by the… |