DS3-3COM-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.44 | Nodeds3 | |||
| 1.3.6.1.4.1.429.1.44.1 | Nodeds3Cfg | |||
| 1.3.6.1.4.1.429.1.44.1.1 | Tableds3CfgTable | not-accessible | mandatory | The DS3 Configuration Table. |
| 1.3.6.1.4.1.429.1.44.1.1.1 | Rowds3CfgEntry | not-accessible | mandatory | An entry in the DS3 Configuration Table. |
| 1.3.6.1.4.1.429.1.44.1.1.1.1 | Columnds3CfgIndex | read-write | mandatory | A unique value at the DS3 level in the chassis. |
| 1.3.6.1.4.1.429.1.44.1.1.1.2 | Columnds3CfgXmitLineBuildOut | read-write | mandatory | This object is used to configure the amount of attenuation that is to be applied to the DS3 transmit signal in order to control cross-talk, etc. The settings a… |
| 1.3.6.1.4.1.429.1.44.1.1.1.3 | Columnds3CfgMonitorPortSource | read-write | mandatory | This object is for designation of monitor port DS1 source. Default=spanLine1(1). |
| 1.3.6.1.4.1.429.1.44.2 | Nodeds3Current | |||
| 1.3.6.1.4.1.429.1.44.2.1 | Tableds3CurrentTable | not-accessible | mandatory | This table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.429.1.44.2.1.1 | Rowds3CurrentEntry | not-accessible | mandatory | An entry in the DS3 current table. |
| 1.3.6.1.4.1.429.1.44.2.1.1.1 | Columnds3CurrentIndex | read-only | mandatory | The index value which uniquely identifies the DS3 interface to which this entry is applicable. |
| 1.3.6.1.4.1.429.1.44.2.1.1.2 | Columnds3CurrentFCPs | read-only | mandatory | This object indicates near end path failure count. The count of LOF or AIS events. |
| 1.3.6.1.4.1.429.1.44.2.1.1.3 | Columnds3CurrentFCCPs | read-only | mandatory | This object indicates far end path failure count. The count of Remote Alarm Indication (RAI) events. |
| 1.3.6.1.4.1.429.1.44.2.1.1.4 | Columnds3CurrentSESLs | read-only | mandatory | The object is the counter associated with the number of Severely Errored Seconds on the line. |
| 1.3.6.1.4.1.429.1.44.2.1.1.5 | Columnds3CurrentUASCPs | read-only | mandatory | This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application. |
| 1.3.6.1.4.1.429.1.44.3 | Nodeds3Interval | |||
| 1.3.6.1.4.1.429.1.44.3.1 | Tableds3IntervalTable | not-accessible | mandatory | The DS3 Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 9… |
| 1.3.6.1.4.1.429.1.44.3.1.1 | Rowds3IntervalEntry | not-accessible | mandatory | An entry in the DS3 Interval Table. |
| 1.3.6.1.4.1.429.1.44.3.1.1.1 | Columnds3IntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS3 interface to which this entry is applicable. |
| 1.3.6.1.4.1.429.1.44.3.1.1.2 | Columnds3IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completes 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.429.1.44.3.1.1.3 | Columnds3IntervalSESLs | read-only | mandatory | This object is the counter associated with the number of Severely Errored Seconds on the line in the previous 15 minute interval. |
| 1.3.6.1.4.1.429.1.44.3.1.1.4 | Columnds3IntervalCVCPs | read-only | mandatory | This object is the counter associated with the number of near-end path code violations for the C-bit parity application in the previous 15 minute interval. |
| 1.3.6.1.4.1.429.1.44.3.1.1.5 | Columnds3IntervalUASCPs | read-only | mandatory | This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application in the previous 15 minute interval. |
| 1.3.6.1.4.1.429.1.44.4 | Nodeds3Total | |||
| 1.3.6.1.4.1.429.1.44.4.1 | Tableds3TotalTable | not-accessible | mandatory | The DS3 Total Table contains the cumulative sum of the various statics for the 24 hour period preceding the current interval. |
| 1.3.6.1.4.1.429.1.44.4.1.1 | Rowds3TotalEntry | not-accessible | mandatory | An entry in the DS3 Total Table. |
| 1.3.6.1.4.1.429.1.44.4.1.1.1 | Columnds3TotalIndex | read-only | mandatory | The index value which uniquely identifies the DS3 interface to which this entry is applicable. |
| 1.3.6.1.4.1.429.1.44.4.1.1.2 | Columnds3TotalSESLs | read-only | mandatory | This object is the counter associated with the number of Severely Errored Seconds on the line in the previous 24 hour interval. Invalid 15 intervals count as 0. |
| 1.3.6.1.4.1.429.1.44.4.1.1.3 | Columnds3TotalCVCPs | read-only | mandatory | This object is the counter associated with the number of near-end path code violations for the C-bit parity application in the previous 24 hour interval. Inval… |
| 1.3.6.1.4.1.429.1.44.4.1.1.4 | Columnds3TotalUASCPs | read-only | mandatory | This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application in the previous 24 hour interval. Invalid 15 minu… |
| 1.3.6.1.4.1.429.1.44.5 | Nodeds3TrapEnable | |||
| 1.3.6.1.4.1.429.1.44.5.1 | Tableds3TrapEnableTable | not-accessible | mandatory | The DS3 Trap eanble table contains the line status change trap enable |
| 1.3.6.1.4.1.429.1.44.5.1.1 | Rowds3TrapEnableEntry | not-accessible | mandatory | An entry in Ds3 Trap Enable Table |
| 1.3.6.1.4.1.429.1.44.5.1.1.1 | Columnds3TrapEnableIndex | read-only | mandatory | An unique value which identifies the DS3. |
| 1.3.6.1.4.1.429.1.44.5.1.1.2 | Columnds3LineStatusChangeTE | read-write | mandatory | DS3 Line status change trap enable flag |
| 1.3.6.1.4.1.429.1.44.6 | Nodeds3TrapObj | |||
| 1.3.6.1.4.1.429.1.44.6.1 | Tableds3TrapObjTable | not-accessible | mandatory | DS3 Trap obj table is a pace holder for status string |
| 1.3.6.1.4.1.429.1.44.6.1.1 | Rowds3TrapObjEntry | not-accessible | mandatory | An entry in DS3 Trap Obj table |
| 1.3.6.1.4.1.429.1.44.6.1.1.1 | Columnds3TrapObjIndex | read-only | mandatory | An unique value for the index |
| 1.3.6.1.4.1.429.1.44.6.1.1.2 | Columnds3StatusObjString | not-accessible | mandatory | For line status string it is a place holder |