MIB Viewer

DSLite-MIB

57 objects
The MIB module is defined for management of objects in the DS-Lite scenario. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress InetAddressPrefixLength InetAddressType InetPortNumber
NATV2-MIBNatv2InstanceIndex Natv2SubscriberIndex ProtocolNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
OIDNameAccessStatusDescription
1.3.6.1.2.1.240IdentitydsliteMIBThe MIB module is defined for management of objects in the DS-Lite scenario. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. A…
1.3.6.1.2.1.240.0NodedsliteNotifications
1.3.6.1.2.1.240.0.1NotificationdsliteTunnelNumAlarmcurrentThis trap is triggered when the number of current DS-Lite tunnels exceeds the value of the dsliteAFTRAlarmConnectNumber.
1.3.6.1.2.1.240.0.2NotificationdsliteAFTRUserSessionNumAlarmcurrentThis trap is triggered when user sessions reach the threshold. The threshold is specified by the dsliteAFTRAlarmSessionNumber.
1.3.6.1.2.1.240.0.3NotificationdsliteAFTRPortUsageOfSpecificIpAlarmcurrentThis trap is triggered when the used NAT ports of map address reach the threshold. The threshold is specified by the dsliteAFTRAlarmPortNumber.
1.3.6.1.2.1.240.1NodedsliteMIBObjects
1.3.6.1.2.1.240.1.1NodedsliteTunnel
1.3.6.1.2.1.240.1.1.1TabledsliteTunnelTablenot-accessiblecurrentThe (conceptual) table containing information on configured tunnels. This table can be used to map a B4 address to the associated AFTR address. It can also be …
1.3.6.1.2.1.240.1.1.1.1RowdsliteTunnelEntrynot-accessiblecurrentEach entry in this table contains the information on a particular configured tunnel.
1.3.6.1.2.1.240.1.1.1.1.1ColumndsliteTunnelAddressTypenot-accessiblecurrentThis object MUST be set to the value of ipv6(2). It describes the address type of the IPv4-in-IPv6 tunnel initiator and endpoint.
1.3.6.1.2.1.240.1.1.1.1.2ColumndsliteTunnelStartAddressnot-accessiblecurrentThe IPv6 address of the initiator of the tunnel. The address type is given by dsliteTunnelAddressType.
1.3.6.1.2.1.240.1.1.1.1.3ColumndsliteTunnelEndAddressnot-accessiblecurrentThe IPv6 address of the endpoint of the tunnel. The address type is given by dsliteTunnelAddressType.
1.3.6.1.2.1.240.1.1.1.1.4ColumndsliteTunnelStartAddPreLenread-onlycurrentThe IPv6 prefix length of the IP address for the initiator of the tunnel(dsliteTunnelStartAddress).
1.3.6.1.2.1.240.1.2NodedsliteNAT
1.3.6.1.2.1.240.1.2.1TabledsliteNATBindTablenot-accessiblecurrentThis table contains information about currently active NAT binds in the NAT of the AFTR. This table adds the IPv6 address of a B4 to the natv2PortMapTable defi…
1.3.6.1.2.1.240.1.2.1.1RowdsliteNATBindEntrynot-accessiblecurrentThe entry in this table holds the mapping relationship between tunnel information and NAT bind information. Each entry in this table not only needs to match a …
1.3.6.1.2.1.240.1.2.1.1.1ColumndsliteNATBindMappingInstanceIndexnot-accessiblecurrentIndex of the NAT instance that created this port map entry.
1.3.6.1.2.1.240.1.2.1.1.2ColumndsliteNATBindMappingProtonot-accessiblecurrentThis object specifies the mapping's transport protocol number.
1.3.6.1.2.1.240.1.2.1.1.3ColumndsliteNATBindMappingExtRealmnot-accessiblecurrentThe realm to which dsliteNATBindMappingExtAddress belongs.
1.3.6.1.2.1.240.1.2.1.1.4ColumndsliteNATBindMappingExtAddressTypenot-accessiblecurrentAddress type for the mapping's external address. This object MUST be set to the value of iPv4(1). The values of ipv6(2), ipv4z(3), and ipv6z(4) are not allowed.
1.3.6.1.2.1.240.1.2.1.1.5ColumndsliteNATBindMappingExtAddressnot-accessiblecurrentThe mapping's external address. This is the source address for translated outgoing packets. The address type is given by dsliteNATBindMappingExtAddressType.
1.3.6.1.2.1.240.1.2.1.1.6ColumndsliteNATBindMappingExtPortnot-accessiblecurrentThe mapping's assigned external port number. This is the source port for translated outgoing packets. This MUST be a non-zero value.
1.3.6.1.2.1.240.1.2.1.1.7ColumndsliteNATBindMappingIntRealmread-onlycurrentThe realm to which natMappingIntAddress belongs. This realm defines the IPv6 address space from which the tunnel source address is taken. The realm of the enca…
1.3.6.1.2.1.240.1.2.1.1.8ColumndsliteNATBindMappingIntAddressTyperead-onlycurrentAddress type of the mapping's internal address. This object MUST be set to the value of iPv4z(3). The values of ipv4(1), ipv6(2), and ipv6z(4) are not allowed.
1.3.6.1.2.1.240.1.2.1.1.9ColumndsliteNATBindMappingIntAddressread-onlycurrentThe mapping's internal address. It is the IPv6 tunnel source address. The address type is given by dsliteNATBindMappingIntAddressType.
1.3.6.1.2.1.240.1.2.1.1.10ColumndsliteNATBindMappingIntPortread-onlycurrentThe mapping's internal port number. This MUST be a non-zero value.
1.3.6.1.2.1.240.1.2.1.1.11ColumndsliteNATBindMappingPoolread-onlycurrentIndex of the pool that contains this mapping's external address and port. If zero, no pool is associated with this mapping.
1.3.6.1.2.1.240.1.2.1.1.12ColumndsliteNATBindMappingMapBehaviorread-onlycurrentMapping behavior as described in Section 4.1 of RFC 4787. endpointIndependent(0), the behavior REQUIRED by RFC 4787, REQ-1 maps the source address and port to …
1.3.6.1.2.1.240.1.2.1.1.13ColumndsliteNATBindMappingFilterBehaviorread-onlycurrentFiltering behavior as described in Section 5 of RFC 4787. endpointIndependent(0) accepts for translation packets from all combinations of remote address and po…
1.3.6.1.2.1.240.1.2.1.1.14ColumndsliteNATBindMappingAddressPoolingread-onlycurrentType of address pooling behavior that was used to create this mapping. arbitrary(0) pooling behavior means that the NAT instance may create the new port mappin…
1.3.6.1.2.1.240.1.3NodedsliteInfo
1.3.6.1.2.1.240.1.3.1NodedsliteAFTRAlarmScalar
1.3.6.1.2.1.240.1.3.1.1ScalardsliteAFTRAlarmB4AddrTypeaccessible-for-notifycurrentThis object indicates the address type of the B4, which will send an alarm.
1.3.6.1.2.1.240.1.3.1.2ScalardsliteAFTRAlarmB4Addraccessible-for-notifycurrentThis object indicates the IP address of B4, which will send an alarm. The address type is given by dsliteAFTRAlarmB4AddrType.
1.3.6.1.2.1.240.1.3.1.3ScalardsliteAFTRAlarmProtocolTypeaccessible-for-notifycurrentThis object indicates the transport protocol type of alarm. tcp (0) means that the transport protocol type of alarm is tcp. udp (1) means that the transport pr…
1.3.6.1.2.1.240.1.3.1.4ScalardsliteAFTRAlarmSpecificIPAddrTypeaccessible-for-notifycurrentThis object indicates the address type of the IP address whose port usage has reached the threshold.
1.3.6.1.2.1.240.1.3.1.5ScalardsliteAFTRAlarmSpecificIPaccessible-for-notifycurrentThis object indicates the IP address whose port usage has reached the threshold. The address type is given by dsliteAFTRAlarmSpecificIPAddrType.
1.3.6.1.2.1.240.1.3.1.6ScalardsliteAFTRAlarmConnectNumberread-writecurrentThis object indicates the notification threshold of the DS-Lite tunnels that is active in the AFTR device.
1.3.6.1.2.1.240.1.3.1.7ScalardsliteAFTRAlarmSessionNumberread-writecurrentThis object indicates the notification threshold of the IPv4 session for the user.
1.3.6.1.2.1.240.1.3.1.8ScalardsliteAFTRAlarmPortNumberread-writecurrentThis object indicates the notification threshold of the NAT ports that have been used by the user.
1.3.6.1.2.1.240.1.3.2TabledsliteStatisticsTablenot-accessiblecurrentThis table provides statistical information about DS-Lite.
1.3.6.1.2.1.240.1.3.2.1RowdsliteStatisticsEntrynot-accessiblecurrentEach entry in this table provides statistical information about DS-Lite.
1.3.6.1.2.1.240.1.3.2.1.1ColumndsliteStatisticsSubscriberIndexnot-accessiblecurrentIndex of the subscriber or host. A unique value, greater than zero, for each subscriber in the managed system.
1.3.6.1.2.1.240.1.3.2.1.2ColumndsliteStatisticsDiscardsread-onlycurrentThis object indicates the number of packets discarded from this subscriber.
1.3.6.1.2.1.240.1.3.2.1.3ColumndsliteStatisticsSendsread-onlycurrentThis object indicates the number of packets that is sent to this subscriber.
1.3.6.1.2.1.240.1.3.2.1.4ColumndsliteStatisticsReceivesread-onlycurrentThis object indicates the number of packets that is received from this subscriber.
1.3.6.1.2.1.240.1.3.2.1.5ColumndsliteStatisticsIpv4Sessionread-onlycurrentThis object indicates the number of the current IPv4 Sessions.
1.3.6.1.2.1.240.1.3.2.1.6ColumndsliteStatisticsIpv6Sessionread-onlycurrentThis object indicates the number of the current IPv6 session. Because the AFTR is also a dual-stack device, it will also forward normal IPv6 packets for the in…
1.3.6.1.2.1.240.2NodedsliteConformance
1.3.6.1.2.1.240.2.1NodedsliteCompliances
1.3.6.1.2.1.240.2.1.1CompliancedsliteCompliancecurrentDescribes the minimal requirements for conformance to the DS-Lite MIB.
1.3.6.1.2.1.240.2.2NodedsliteGroups
1.3.6.1.2.1.240.2.2.1GroupdsliteNATBindGroupcurrentA collection of objects to support basic management of NAT binds in the NAT of the AFTR.
1.3.6.1.2.1.240.2.2.2GroupdsliteTunnelGroupcurrentA collection of objects to support management of DS-Lite tunnels.
1.3.6.1.2.1.240.2.2.3GroupdsliteStatisticsGroupcurrentA collection of objects to support management of statistical information for AFTR devices.
1.3.6.1.2.1.240.2.2.4GroupdsliteNotificationsGroupcurrentA collection of objects to support management of trap information for AFTR devices.
1.3.6.1.2.1.240.2.2.5GroupdsliteAFTRAlarmScalarGroupcurrentA collection of objects to support management of the information about the AFTR alarming scalar.