DV2-MIB
2016 objects
No module-level DESCRIPTION found.
Imported Objects
| groups MISSING | -- |
| GROUPS MISSING | asn -- dv2 -- |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.251 | Nodenetcomm | |||
| 1.3.6.1.4.1.251.1 | Nodeproducts | |||
| 1.3.6.1.4.1.251.1.1 | Nodedv2 | |||
| 1.3.6.1.4.1.251.1.1.1 | Nodedv2Message | This is used to send an arbitary text string to the NMS. | ||
| 1.3.6.1.4.1.251.1.1.1 | Nodedv2System | |||
| 1.3.6.1.4.1.251.1.1.1.1 | ScalarsysMemEnd | read-only | mandatory | The current end of run-time allocated memory. |
| 1.3.6.1.4.1.251.1.1.1.4 | ScalarsysInitialMemB | read-only | mandatory | initial number of memory items. |
| 1.3.6.1.4.1.251.1.1.1.5 | ScalarsysCurrentMemB | read-only | mandatory | Current number of memory items. |
| 1.3.6.1.4.1.251.1.1.1.6 | ScalarsysInitialSema | read-only | mandatory | Initial number of semaphores. |
| 1.3.6.1.4.1.251.1.1.1.7 | ScalarsysCurrentSema | read-only | mandatory | Current number of semaphores. |
| 1.3.6.1.4.1.251.1.1.1.8 | ScalarsysInitialQItems | read-only | mandatory | Initial number of queue items. |
| 1.3.6.1.4.1.251.1.1.1.9 | ScalarsysCurrentQItems | read-only | mandatory | Current number of queue items. |
| 1.3.6.1.4.1.251.1.1.1.10 | ScalarsysInitialQs | read-only | mandatory | Initial number of queues. |
| 1.3.6.1.4.1.251.1.1.1.11 | ScalarsysCurrentQs | read-only | mandatory | Current number of queues. |
| 1.3.6.1.4.1.251.1.1.1.12 | ScalarsysInitialPorts | read-only | mandatory | Initial number of ports. |
| 1.3.6.1.4.1.251.1.1.1.13 | ScalarsysCurrentPorts | read-only | mandatory | Current number of ports. |
| 1.3.6.1.4.1.251.1.1.1.14 | ScalarsysDefaultCellMode | read-only | mandatory | This flag indicates whether the cell interface is operating in default mode. If yes(2) then this indicates that the daughter card processor is not running its … |
| 1.3.6.1.4.1.251.1.1.1.15 | TablesysLinkTable | not-accessible | mandatory | This table contains information about each link on this slot controller. |
| 1.3.6.1.4.1.251.1.1.1.15.1 | RowsysLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.1.15.1.1 | ColumnsysLkLinkNo | read-only | mandatory | The link number on the slot |
| 1.3.6.1.4.1.251.1.1.1.15.1.2 | ColumnsysLkKillLink | read-write | mandatory | Set to restart(2) to kill this link |
| 1.3.6.1.4.1.251.1.1.1.15.1.3 | ColumnsysLkState | read-only | mandatory | Status of the link |
| 1.3.6.1.4.1.251.1.1.1.15.1.4 | ColumnsysLkTxCells | read-only | mandatory | Number of cells sent from link |
| 1.3.6.1.4.1.251.1.1.1.15.1.5 | ColumnsysLkRxCells | read-only | mandatory | Number of cells received to link |
| 1.3.6.1.4.1.251.1.1.1.15.1.6 | ColumnsysLkTxRate | read-only | mandatory | Cells per second sent from link |
| 1.3.6.1.4.1.251.1.1.1.15.1.7 | ColumnsysLkRxRate | read-only | mandatory | Cells per second received to link |
| 1.3.6.1.4.1.251.1.1.1.15.1.8 | ColumnsysLkTxMaxRate | read-only | mandatory | Maximum cells per second transmitted from link |
| 1.3.6.1.4.1.251.1.1.1.15.1.9 | ColumnsysLkRxMaxRate | read-only | mandatory | Maximum cells per second received to link |
| 1.3.6.1.4.1.251.1.1.1.15.1.10 | ColumnsysLkResetStats | read-write | mandatory | Set to yes(2) to reset the link statistics |
| 1.3.6.1.4.1.251.1.1.1.15.1.11 | ColumnsysLkClockSrc | read-write | mandatory | This specifies where the link obtains its clock |
| 1.3.6.1.4.1.251.1.1.1.15.1.12 | ColumnsysLkResetResrc | read-write | mandatory | Set to yes(2) to reset the link resources |
| 1.3.6.1.4.1.251.1.1.1.15.1.13 | ColumnsysLKEgCLPThreshold | read-write | mandatory | Transmit CLP1 threshold |
| 1.3.6.1.4.1.251.1.1.1.15.1.14 | ColumnsysLKIgCLPThreshold | read-write | mandatory | Receive CLP1 threshold |
| 1.3.6.1.4.1.251.1.1.1.15.1.15 | ColumnsysLKEgEFCIThreshold | read-write | mandatory | Transmit EFCI threshold |
| 1.3.6.1.4.1.251.1.1.1.15.1.16 | ColumnsysLKIgEFCIThreshold | read-write | mandatory | Receive EFCI threshold |
| 1.3.6.1.4.1.251.1.1.1.15.1.17 | ColumnsysLKEgLogBuffer | read-write | mandatory | Transmit logic buffer size |
| 1.3.6.1.4.1.251.1.1.1.15.1.18 | ColumnsysLKIgLogBuffer | read-write | mandatory | Receive logic buffer size |
| 1.3.6.1.4.1.251.1.1.1.15.1.19 | ColumnsysLKEgFIFODepth | read-only | mandatory | Transmit FIFO Depth |
| 1.3.6.1.4.1.251.1.1.1.15.1.20 | ColumnsysLKIgFIFODepth | read-only | mandatory | Receive FIFO Depth |
| 1.3.6.1.4.1.251.1.1.1.15.1.21 | ColumnsysLKEgMemBlockId | read-only | mandatory | Transmit Memory Block ID |
| 1.3.6.1.4.1.251.1.1.1.15.1.22 | ColumnsysLKIgMemBlockId | read-only | mandatory | Receive Memory Block ID |
| 1.3.6.1.4.1.251.1.1.1.16 | TablesysDbTable | not-accessible | mandatory | This table contains information about the internal buffer pool on the slot controller. |
| 1.3.6.1.4.1.251.1.1.1.16.1 | RowsysDbEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.1.16.1.1 | ColumnsysDbIndex | read-only | mandatory | Buffer class number |
| 1.3.6.1.4.1.251.1.1.1.16.1.2 | ColumnsysDbSize | read-only | mandatory | Five classes of buffers are used:- 16, 128, 368 and 1600 bytes plus 48 bytes for cells. |
| 1.3.6.1.4.1.251.1.1.1.16.1.3 | ColumnsysDbInitial | read-only | mandatory | This is the initial number of buffers available. |
| 1.3.6.1.4.1.251.1.1.1.16.1.4 | ColumnsysDbCurrent | read-only | mandatory | This is the current number of buffers available. |
| 1.3.6.1.4.1.251.1.1.1.17 | TablesysAuthenticateTable | not-accessible | mandatory | Table containing all the authentication tuples for this agent. |
| 1.3.6.1.4.1.251.1.1.1.17.1 | RowsysAuthenticateEntry | not-accessible | mandatory | An authentication tuple. A PDU from the ipaddress specified that contains the community, will have access to this MIB. |
| 1.3.6.1.4.1.251.1.1.1.17.1.1 | ColumnsysAuIndex | read-write | mandatory | Index, identifying each entry in the authentication table. |
| 1.3.6.1.4.1.251.1.1.1.17.1.2 | ColumnsysAuIpaddress | read-write | mandatory | The network address of the manager that has authentication access to this agent. |
| 1.3.6.1.4.1.251.1.1.1.17.1.3 | ColumnsysAuCommunity | read-write | mandatory | The SNMP community for which the ipaddress is authenticated. |
| 1.3.6.1.4.1.251.1.1.1.17.1.4 | ColumnsysAuAccess | read-write | mandatory | Access permission for this ipaddress/community tuple. Write access is required for performing SNMP sets. |
| 1.3.6.1.4.1.251.1.1.1.17.1.5 | ColumnsysAuSendTraps | read-write | mandatory | Set to send-none(2) to prevent traps being sent to this host. |
| 1.3.6.1.4.1.251.1.1.1.17.1.6 | ColumnsysAuValidity | read-write | mandatory | Set to invalid(2) to delete this row. |
| 1.3.6.1.4.1.251.1.1.1.18 | ScalarsysLastTrapMessage | read-only | mandatory | This is used to contain the last trap string sent. |
| 1.3.6.1.4.1.251.1.1.1.19 | ScalarsysConfigChanged | read-write | mandatory | This indicates that a new <config.cfg> file is available. This should not be set by the user. |
| 1.3.6.1.4.1.251.1.1.1.20 | ScalarsysConfigFile | read-write | mandatory | Set to read(2) to re-read the <config.cfg> file. Set to write(3) to write the existing configuration to <config.cfg>. |
| 1.3.6.1.4.1.251.1.1.1.21 | ScalarsysCompileTime | read-only | mandatory | Date and time of link in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21 |
| 1.3.6.1.4.1.251.1.1.1.22 | ScalarslotNumber | read-only | mandatory | Slot Number |
| 1.3.6.1.4.1.251.1.1.1.23 | ScalarsysLastResetTimeM2 | read-only | mandatory | Date and time board was last reset. |
| 1.3.6.1.4.1.251.1.1.1.24 | ScalarsysCurrentTimeM2 | read-write | mandatory | Current date and time in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21 |
| 1.3.6.1.4.1.251.1.1.1.25 | ScalarlimTypeStatus | read-only | mandatory | Describes whether the lim and the DOC card are compatible. |
| 1.3.6.1.4.1.251.1.1.2 | Nodedv2Slot0 | |||
| 1.3.6.1.4.1.251.1.1.2 | NodeslotChanged | This is sent when a slot changes state. | ||
| 1.3.6.1.4.1.251.1.1.2.1 | Scalarslot0IntIp | read-only | mandatory | IP address of SLOT 0 for ATM interface. |
| 1.3.6.1.4.1.251.1.1.2.2 | Scalarslot0XpInUse | read-only | mandatory | The current Switch Fabric in Service |
| 1.3.6.1.4.1.251.1.1.2.3 | Scalarslot0XpToUse | read-write | mandatory | This indicates the switch fabric card you want the switch to use. |
| 1.3.6.1.4.1.251.1.1.2.4 | Scalarslot0StandbyXp | read-write | mandatory | Set to yes(1) to enable standby switch fabric. |
| 1.3.6.1.4.1.251.1.1.2.5 | Tableslot0PsuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.2.5.1 | Rowslot0PsuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.2.5.1.1 | Columnslot0PsuIndex | read-only | mandatory | Power-supply number. |
| 1.3.6.1.4.1.251.1.1.2.5.1.2 | Columnslot0PsuFault | read-only | mandatory | If fault(2) then this indicates a fault condition in the power-supply. |
| 1.3.6.1.4.1.251.1.1.2.5.1.3 | Columnslot0PsuTestFault | read-only | mandatory | If set to yes(1) the control button on the PSU module has been set to test fault mode. |
| 1.3.6.1.4.1.251.1.1.2.5.1.4 | Columnslot0PsuVoltage | read-only | mandatory | This is a the voltage generated by the power-supply in millivolts. |
| 1.3.6.1.4.1.251.1.1.2.5.1.5 | Columnslot0PsuTemp | read-only | mandatory | This is the temperature of the power-supply module in degrees celsius. |
| 1.3.6.1.4.1.251.1.1.2.5.1.6 | Columnslot0PsuFanASpeed | read-only | mandatory | This is the rotation speed of FAN A in RPM. |
| 1.3.6.1.4.1.251.1.1.2.5.1.7 | Columnslot0PsuFanBSpeed | read-only | mandatory | This is the rotation speed of FAN B in RPM. |
| 1.3.6.1.4.1.251.1.1.2.5.1.8 | Columnslot0PsuFanCSpeed | read-only | mandatory | This is the rotation speed of FAN C in RPM. |
| 1.3.6.1.4.1.251.1.1.2.5.1.9 | Columnslot0PsuReset | read-write | mandatory | If set to yes(2) then the power-supply module is returned to its initial state. |
| 1.3.6.1.4.1.251.1.1.2.5.1.10 | Columnslot0PsuType | read-only | mandatory | Shows the type of PSU fitted into switch. |
| 1.3.6.1.4.1.251.1.1.2.5.1.11 | Columnslot0PsuFanFail | read-only | mandatory | Set to yes(2) if the fan fails. |
| 1.3.6.1.4.1.251.1.1.2.5.1.12 | Columnslot0PsuTooHot | read-only | mandatory | Set to yes(2) if the PSU is too hot |
| 1.3.6.1.4.1.251.1.1.2.5.1.13 | Columnslot0PsuFrontTooHot | read-only | mandatory | Set to yes(2) if the Front is too hot |
| 1.3.6.1.4.1.251.1.1.2.6 | Tableslot0PhyTable | not-accessible | mandatory | This table summarises the hardware installed in the switch. |
| 1.3.6.1.4.1.251.1.1.2.6.1 | Rowslot0PhyEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.2.6.1.1 | Columnslot0PhySlotNo | read-only | mandatory | This is the slot number in the switch. |
| 1.3.6.1.4.1.251.1.1.2.6.1.2 | Columnslot0PhyName | read-write | mandatory | This is a mnemonic name for the slot. |
| 1.3.6.1.4.1.251.1.1.2.6.1.3 | Columnslot0PhyType | read-only | mandatory | This enumerated type defines the type of card fitted in the slot. |
| 1.3.6.1.4.1.251.1.1.2.6.1.4 | Columnslot0PhyDlim | read-write | mandatory | This is the type of DLIM fitted to the slot. |
| 1.3.6.1.4.1.251.1.1.2.6.1.5 | Columnslot0PhySwVer | read-only | mandatory | Version of the software running on this slot controller. |
| 1.3.6.1.4.1.251.1.1.2.6.1.6 | Columnslot0PhyState | read-only | mandatory | The state of the slot, -(1) indicates no card fitted. |
| 1.3.6.1.4.1.251.1.1.2.6.1.7 | Columnslot0PhyReset | read-write | mandatory | Setting to yes(2) will reset the slot - use with care |
| 1.3.6.1.4.1.251.1.1.2.6.1.8 | Columnslot0PhyReqState | read-write | mandatory | Setting to shutdown(2) will stop the slot running. The slot should only be set to main(3) or shadow(4) if the slot is operating in hardware redundant mode with… |
| 1.3.6.1.4.1.251.1.1.2.6.1.10 | Columnslot0PhyStateChange | read-only | mandatory | Indicates link has changed state. |
| 1.3.6.1.4.1.251.1.1.2.6.1.11 | Columnslot0PhyLinkedSlot | read-write | mandatory | This is used in hardware redundancy mode. If set to 0 then there is no associated slot. Otherwise the value is the slot number that will be used if this slot f… |
| 1.3.6.1.4.1.251.1.1.2.6.1.12 | Columnslot0PhyLink0State | read-only | mandatory | This contains link 0 status. |
| 1.3.6.1.4.1.251.1.1.2.6.1.13 | Columnslot0PhyLink1State | read-only | mandatory | This contains link 1 status. |
| 1.3.6.1.4.1.251.1.1.2.6.1.14 | Columnslot0PhyLink2State | read-only | mandatory | This contains link 2 status. |
| 1.3.6.1.4.1.251.1.1.2.6.1.15 | Columnslot0PhyLink3State | read-only | mandatory | This contains link 3 status. |
| 1.3.6.1.4.1.251.1.1.2.6.1.16 | Columnslot0PhySlotSerNo | read-only | mandatory | Serial number of the slot controller. |
| 1.3.6.1.4.1.251.1.1.2.6.1.17 | Columnslot0PhySlotHwVerNo | read-only | mandatory | Hardware version number and revision of the slot controller. |
| 1.3.6.1.4.1.251.1.1.2.6.1.18 | Columnslot0PhyDocSerNo | read-only | mandatory | Serial number of the DOC. |
| 1.3.6.1.4.1.251.1.1.2.6.1.19 | Columnslot0PhyDocHwVerNo | read-only | mandatory | Hardware version number and revision of the DOC. |
| 1.3.6.1.4.1.251.1.1.2.6.1.20 | Columnslot0PhyMacAddress | read-write | mandatory | MAC address of the slot. |
| 1.3.6.1.4.1.251.1.1.2.6.1.21 | Columnslot0PhyChangeTimeM2 | read-only | mandatory | Last date and time link changed state. |
| 1.3.6.1.4.1.251.1.1.2.6.1.22 | Columnslot0PhyLstChngLnkNum | read-only | mandatory | Holds the link number of the last link status to change. |
| 1.3.6.1.4.1.251.1.1.2.6.1.23 | Columnslot0PhyLstChngPrevLnkStat | read-only | mandatory | Holds the previous link state of the last link number whose status changed. |
| 1.3.6.1.4.1.251.1.1.2.7 | Scalarslot0MaxUpSlots | read-only | mandatory | The maximum number of slots that have been up. |
| 1.3.6.1.4.1.251.1.1.2.8 | Scalarslot0CurrentUpSlots | read-only | mandatory | The number of slots currently up. |
| 1.3.6.1.4.1.251.1.1.2.9 | Scalarslot0IsStandbySlot0 | read-only | mandatory | Set to yes(2) if there is a redundant slot 0 available. |
| 1.3.6.1.4.1.251.1.1.2.10 | Scalarslot0TftpToStandby | read-write | mandatory | Set to no(2) to stop files being transferred to the out of service slot0 automatically when they are changed. |
| 1.3.6.1.4.1.251.1.1.2.11 | Scalarslot0MibBroadcast | read-write | mandatory | Broadcasts particular tables to all other slots. |
| 1.3.6.1.4.1.251.1.1.2.14 | Scalarslot0Address | read-write | mandatory | The E.164 address of the switch. |
| 1.3.6.1.4.1.251.1.1.2.15 | Scalarslot0InUse | read-only | mandatory | The Slot 0 card Redundancy Status. |
| 1.3.6.1.4.1.251.1.1.2.16 | Scalarslot0ToUse | read-write | mandatory | This indicates the Slot 0 card you want the switch to use. |
| 1.3.6.1.4.1.251.1.1.2.17 | Scalarslot0redmode | read-only | mandatory | The Slot 0 card Redundancy mode. |
| 1.3.6.1.4.1.251.1.1.2.18 | Scalarslot0IntIPMask | read-write | mandatory | IP Mask for Internal Subnet. To reconfigure, Save new configuration and perform then warm Start. |
| 1.3.6.1.4.1.251.1.1.2.19 | Scalarslot0SwitchId | read-write | mandatory | Switch ID for this Apex node |
| 1.3.6.1.4.1.251.1.1.2.20 | Scalarntms0doc | read-write | mandatory | Signifies that the S0DOC is capable of communicating with an NTM |
| 1.3.6.1.4.1.251.1.1.2.21 | Scalarslot0LecsPrefix | read-write | mandatory | The NSAP network prefix for LECS. |
| 1.3.6.1.4.1.251.1.1.2.22 | Scalarslot0LecsESI | read-write | mandatory | The NSAP ESI for LECS. |
| 1.3.6.1.4.1.251.1.1.3 | Nodedv2Trace | |||
| 1.3.6.1.4.1.251.1.1.3 | NodelinkChanged | This is sent when a link changes state. | ||
| 1.3.6.1.4.1.251.1.1.3.1 | ScalartraceIp | read-write | mandatory | Toggle for IP trace flag. |
| 1.3.6.1.4.1.251.1.1.3.2 | ScalartraceUdp | read-write | mandatory | Toggle for UDP trace flag. |
| 1.3.6.1.4.1.251.1.1.3.3 | ScalartraceTcp | read-write | mandatory | Toggle for TCP trace flag. |
| 1.3.6.1.4.1.251.1.1.3.4 | ScalartraceSnmp | read-write | mandatory | Toggle for SNMP trace flag. |
| 1.3.6.1.4.1.251.1.1.3.5 | ScalartraceCat | read-write | mandatory | Toggle for CAT trace flag. |
| 1.3.6.1.4.1.251.1.1.4 | Nodedv2SlipLine | |||
| 1.3.6.1.4.1.251.1.1.4 | NodepsuChanged | This is sent when a power supply changes state. | ||
| 1.3.6.1.4.1.251.1.1.4.1 | ScalarslipIp | read-write | mandatory | IP address of SLIP line. |
| 1.3.6.1.4.1.251.1.1.4.2 | ScalarslipMask | read-write | mandatory | Mask for SLIP line. |
| 1.3.6.1.4.1.251.1.1.4.3 | ScalarslipRemoteIp | read-write | mandatory | IP address of remote end of SLIP line. |
| 1.3.6.1.4.1.251.1.1.4.4 | ScalarslipSpeed | read-write | mandatory | Baud rate of SLIP serial line. |
| 1.3.6.1.4.1.251.1.1.5 | NodeconfigChanged | This is sent when <config.cfg> has changed. | ||
| 1.3.6.1.4.1.251.1.1.5 | Nodedv2StaticRoute | |||
| 1.3.6.1.4.1.251.1.1.6 | Nodedv2Clocks | |||
| 1.3.6.1.4.1.251.1.1.6.1 | ScalarclksTxTimingRef | read-write | mandatory | Transmit Timing Reference |
| 1.3.6.1.4.1.251.1.1.6.2 | ScalarclksSysRefSlotNum | read-write | mandatory | System Timing Reference Slot Number |
| 1.3.6.1.4.1.251.1.1.6.3 | ScalarclksSysRefLinkNum | read-write | mandatory | System Timing Reference Link Number |
| 1.3.6.1.4.1.251.1.1.6.4 | ScalarclksSysRefError | read-only | mandatory | System Timing Error |
| 1.3.6.1.4.1.251.1.1.8 | Nodedv2VcDoc | |||
| 1.3.6.1.4.1.251.1.1.8.1 | TablevcDocTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.8.1.1 | RowvcDocEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.8.1.1.1 | ColumnvcDocLinkNo | read-only | mandatory | This is the target link number for the PVC. |
| 1.3.6.1.4.1.251.1.1.8.1.1.2 | ColumnvcDocEnable | read-write | mandatory | Setting to yes(1) enables the VCDOC channel. |
| 1.3.6.1.4.1.251.1.1.8.1.1.3 | ColumnvcDocVpi | read-only | mandatory | VPI of the VC being used for cell transfers. |
| 1.3.6.1.4.1.251.1.1.8.1.1.4 | ColumnvcDocVci | read-only | mandatory | VCI of the VC being used for cell transfers. |
| 1.3.6.1.4.1.251.1.1.8.1.1.5 | ColumnvcDocLinkSpeed | read-write | mandatory | This sets the speed at which the link is to run. |
| 1.3.6.1.4.1.251.1.1.8.1.1.6 | ColumnvcDocCLines | read-write | mandatory | This sets how control lines should be processed. If Ignore(2) is set then the port is always online. |
| 1.3.6.1.4.1.251.1.1.8.1.1.7 | ColumnvcDocFifoSize | read-write | mandatory | This is the size of the software emulated FIFO. |
| 1.3.6.1.4.1.251.1.1.8.1.1.8 | ColumnvcDocLowWater | read-write | mandatory | This is the point at which the transmit clock is switched to low frequency. This must be between 0 and FIFO Size/2 |
| 1.3.6.1.4.1.251.1.1.8.1.1.9 | ColumnvcDocHighWater | read-write | mandatory | This is the point at which the transmit clock is switched to high frequency. This must be between FIFO size and FIFO Size/2 |
| 1.3.6.1.4.1.251.1.1.8.1.1.10 | ColumnvcDocTestMode | read-write | mandatory | This is the type of self-test to perform with the VC DOC. |
| 1.3.6.1.4.1.251.1.1.8.1.1.11 | ColumnvcDocTestVal | read-write | mandatory | This is the test value to use when doing the pattern-send test. |
| 1.3.6.1.4.1.251.1.1.8.1.1.12 | ColumnvcDocPriority | read-only | mandatory | This indicates that cells will be sent with the priority bit set. |
| 1.3.6.1.4.1.251.1.1.8.1.1.13 | ColumnvcDocSuba | read-only | mandatory | This is the target link number for the VC. |
| 1.3.6.1.4.1.251.1.1.8.1.1.14 | ColumnvcDocSaddr | read-only | mandatory | This is the target slot number for the VC. |
| 1.3.6.1.4.1.251.1.1.8.1.1.15 | ColumnvcDocClockFix | read-write | mandatory | If yes(2) then the clock will not be varied to maintain the size of the send FIFO. |
| 1.3.6.1.4.1.251.1.1.8.2 | TablevcStatTable | not-accessible | mandatory | This is a two row table that contains status information about the VCDOC. |
| 1.3.6.1.4.1.251.1.1.8.2.1 | RowvcStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.8.2.1.1 | ColumnvcStatPortNo | read-only | mandatory | This is the originating port number for the PVC |
| 1.3.6.1.4.1.251.1.1.8.2.1.2 | ColumnvcStatRxState | read-only | mandatory | This indicates whether control lines are high at the other end of the link. |
| 1.3.6.1.4.1.251.1.1.8.2.1.3 | ColumnvcStatTxState | read-only | mandatory | This indicates whether the local control lines are high. |
| 1.3.6.1.4.1.251.1.1.8.2.1.4 | ColumnvcStatFifoCount | read-only | mandatory | This indicates the number of cells waiting in the FIFO. |
| 1.3.6.1.4.1.251.1.1.8.2.1.5 | ColumnvcStatOFlow | read-only | mandatory | Number of Overflows. |
| 1.3.6.1.4.1.251.1.1.8.2.1.6 | ColumnvcStatUFlow | read-only | mandatory | Number of Underflows. |
| 1.3.6.1.4.1.251.1.1.8.2.1.7 | ColumnvcStatReSync | read-only | mandatory | This is the number of times a sequence number resync has been required. |
| 1.3.6.1.4.1.251.1.1.8.2.1.8 | ColumnvcStatInvented | read-only | mandatory | Number of invented cells. |
| 1.3.6.1.4.1.251.1.1.8.2.1.9 | ColumnvcStatRxCells | read-only | mandatory | Received cells count. |
| 1.3.6.1.4.1.251.1.1.8.2.1.10 | ColumnvcStatTxCells | read-only | mandatory | Transmitted cells count. |
| 1.3.6.1.4.1.251.1.1.8.2.1.11 | ColumnvcStatRxSeqNo | read-only | mandatory | Receive current sequence number. |
| 1.3.6.1.4.1.251.1.1.8.2.1.12 | ColumnvcStatTxSeqNo | read-only | mandatory | Transmit current sequence number. |
| 1.3.6.1.4.1.251.1.1.8.2.1.13 | ColumnvcStatLastError | read-only | mandatory | Last error type. |
| 1.3.6.1.4.1.251.1.1.8.2.1.14 | ColumnvcStatLastCompare | read-only | mandatory | Last compare value. |
| 1.3.6.1.4.1.251.1.1.8.2.1.15 | ColumnvcStatTestErrors | read-only | mandatory | Number of test errors detected. |
| 1.3.6.1.4.1.251.1.1.9 | Nodedv2FrRelay | |||
| 1.3.6.1.4.1.251.1.1.9.1 | TablefRelayStatTable | not-accessible | mandatory | This contains the overall status information for the frame relay links. |
| 1.3.6.1.4.1.251.1.1.9.1.1 | RowfRelayStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.1.1.1 | ColumnfRelStatLinkNo | read-only | mandatory | Local send sequence. |
| 1.3.6.1.4.1.251.1.1.9.1.1.2 | ColumnfRelStatLocSeq | read-only | mandatory | Local send sequence. |
| 1.3.6.1.4.1.251.1.1.9.1.1.3 | ColumnfRelStatLocAck | read-only | mandatory | Local ack sequence. |
| 1.3.6.1.4.1.251.1.1.9.1.1.4 | ColumnfRelStatLocState | read-only | mandatory | Local state of link. |
| 1.3.6.1.4.1.251.1.1.9.1.1.5 | ColumnfRelStatLocStartT | read-only | mandatory | Local start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.1.1.6 | ColumnfRelStatLocErrThr | read-only | mandatory | Local error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.1.1.7 | ColumnfRelStatLocMec | read-only | mandatory | Local monitored events Counter. |
| 1.3.6.1.4.1.251.1.1.9.1.1.8 | ColumnfRelStatLocPoll | read-only | mandatory | Local poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.1.1.9 | ColumnfRelStatRemSeq | read-only | mandatory | Remote send sequence. |
| 1.3.6.1.4.1.251.1.1.9.1.1.10 | ColumnfRelStatRemAck | read-only | mandatory | Remote ack sequence. |
| 1.3.6.1.4.1.251.1.1.9.1.1.11 | ColumnfRelStatRemState | read-only | mandatory | Remote state of link. |
| 1.3.6.1.4.1.251.1.1.9.1.1.12 | ColumnfRelStatRemStartT | read-only | mandatory | Remote start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.1.1.13 | ColumnfRelStatRemErrThr | read-only | mandatory | Remote error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.1.1.14 | ColumnfRelStatRemMec | read-only | mandatory | Remote monitored events Counter. |
| 1.3.6.1.4.1.251.1.1.9.1.1.15 | ColumnfRelStatRemPoll | read-only | mandatory | Remote poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.2 | TablefRelayConfTable | not-accessible | mandatory | This table contains the overall configuration for the frame relay links. |
| 1.3.6.1.4.1.251.1.1.9.2.1 | RowfRelayConfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.2.1.1 | ColumnfRelConfLinkNo | read-only | mandatory | Number of the link to configure. |
| 1.3.6.1.4.1.251.1.1.9.2.1.2 | ColumnfRelConfLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.9.2.1.3 | ColumnfRelConfLinkMode | read-write | mandatory | frame mode. |
| 1.3.6.1.4.1.251.1.1.9.2.1.4 | ColumnfRelConfLinkSpeed | read-write | mandatory | Local speed of link. |
| 1.3.6.1.4.1.251.1.1.9.2.1.5 | ColumnfRelConfLinkCline | read-write | mandatory | Set to no(2) to disable control line processing. |
| 1.3.6.1.4.1.251.1.1.9.2.1.6 | ColumnfRelConfLinkType | read-write | mandatory | Type of link. |
| 1.3.6.1.4.1.251.1.1.9.2.1.7 | ColumnfRelConfN391 | read-write | mandatory | Poll count. |
| 1.3.6.1.4.1.251.1.1.9.2.1.8 | ColumnfRelConfN392 | read-write | mandatory | Threshold. |
| 1.3.6.1.4.1.251.1.1.9.2.1.9 | ColumnfRelConfN393 | read-write | mandatory | Monitored events. |
| 1.3.6.1.4.1.251.1.1.9.2.1.10 | ColumnfRelConfT391 | read-write | mandatory | Poll period. |
| 1.3.6.1.4.1.251.1.1.9.2.1.11 | ColumnfRelConfT392 | read-write | mandatory | Poll timeout. |
| 1.3.6.1.4.1.251.1.1.9.3 | TablefraPStatTable | not-accessible | mandatory | This shows the status of the frame relay PVCs for link 0. |
| 1.3.6.1.4.1.251.1.1.9.3.1 | RowfraPStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.3.1.1 | ColumnfraPStatDlci | read-only | mandatory | This is the DLCI for the PVC. |
| 1.3.6.1.4.1.251.1.1.9.3.1.2 | ColumnfraPStatRxBCnt | read-only | mandatory | The number of bytes received. |
| 1.3.6.1.4.1.251.1.1.9.3.1.3 | ColumnfraPStatTxBCnt | read-only | mandatory | The number of bytes transmitted. |
| 1.3.6.1.4.1.251.1.1.9.3.1.4 | ColumnfraPStatRxFCnt | read-only | mandatory | The number of frames received. |
| 1.3.6.1.4.1.251.1.1.9.3.1.5 | ColumnfraPStatTxFCnt | read-only | mandatory | The number of frames transmitted. |
| 1.3.6.1.4.1.251.1.1.9.3.1.6 | ColumnfraPStatRxBRate | read-only | mandatory | The rate of bytes being received. |
| 1.3.6.1.4.1.251.1.1.9.3.1.7 | ColumnfraPStatTxBRate | read-only | mandatory | The rate of bytes being transmitted. |
| 1.3.6.1.4.1.251.1.1.9.3.1.8 | ColumnfraPStatRxFRate | read-only | mandatory | The rate of frames being received. |
| 1.3.6.1.4.1.251.1.1.9.3.1.9 | ColumnfraPStatTxFRate | read-only | mandatory | The rate of frames being transmitted. |
| 1.3.6.1.4.1.251.1.1.9.3.1.10 | ColumnfraPStatDERxF | read-only | mandatory | The count of discarded eligible received frames. |
| 1.3.6.1.4.1.251.1.1.9.3.1.11 | ColumnfraPStatDisRxF | read-only | mandatory | The count of discarded received frames. |
| 1.3.6.1.4.1.251.1.1.9.3.1.12 | ColumnfraPStatPvcStat | read-only | mandatory | The state of the PVC. |
| 1.3.6.1.4.1.251.1.1.9.3.1.13 | ColumnfraPStatLinkState | read-only | mandatory | The state of the link. |
| 1.3.6.1.4.1.251.1.1.9.3.1.14 | ColumnfraPStatLocSeq | read-only | mandatory | The local send sequence. |
| 1.3.6.1.4.1.251.1.1.9.3.1.15 | ColumnfraPStatLocAck | read-only | mandatory | The local acknowledge number. |
| 1.3.6.1.4.1.251.1.1.9.3.1.16 | ColumnfraPStatLocStat | read-only | mandatory | The local state of the link. |
| 1.3.6.1.4.1.251.1.1.9.3.1.17 | ColumnfraPStatLocStartT | read-only | mandatory | The local start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.3.1.18 | ColumnfraPStatLocErrThr | read-only | mandatory | The local error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.3.1.19 | ColumnfraPStatLocMec | read-only | mandatory | The local monitored event Counter. |
| 1.3.6.1.4.1.251.1.1.9.3.1.20 | ColumnfraPStatLocPoll | read-only | mandatory | The local poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.3.1.21 | ColumnfraPStatRemSeq | read-only | mandatory | The remote send sequence. |
| 1.3.6.1.4.1.251.1.1.9.3.1.22 | ColumnfraPStatRemAck | read-only | mandatory | The remote acknowledge number. |
| 1.3.6.1.4.1.251.1.1.9.3.1.23 | ColumnfraPStatRemStat | read-only | mandatory | The remote state of the link. |
| 1.3.6.1.4.1.251.1.1.9.3.1.24 | ColumnfraPStatRemStartT | read-only | mandatory | The remote start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.3.1.25 | ColumnfraPStatRemErrThr | read-only | mandatory | The remote error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.3.1.26 | ColumnfraPStatRemMec | read-only | mandatory | The remote monitored event Counter. |
| 1.3.6.1.4.1.251.1.1.9.3.1.27 | ColumnfraPStatRemPoll | read-only | mandatory | The remote poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.3.1.29 | ColumnfraPStatLastChangeM2 | read-only | mandatory | The date and time of last state change. |
| 1.3.6.1.4.1.251.1.1.9.4 | TablefraPConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.4.1 | RowfraPConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.4.1.1 | ColumnfraPConfigDlci | read-write | mandatory | This is the DLCI for the PVC. |
| 1.3.6.1.4.1.251.1.1.9.4.1.2 | ColumnfraPConfigCir | read-write | mandatory | The committed information rate. |
| 1.3.6.1.4.1.251.1.1.9.4.1.3 | ColumnfraPConfigCommitB | read-write | mandatory | The committed burst rate. |
| 1.3.6.1.4.1.251.1.1.9.4.1.4 | ColumnfraPConfigExcessB | read-write | mandatory | The excess burst size. |
| 1.3.6.1.4.1.251.1.1.9.4.1.5 | ColumnfraVpi | read-only | mandatory | The VPI for this call. |
| 1.3.6.1.4.1.251.1.1.9.4.1.6 | ColumnfraVci | read-only | mandatory | The VCI for the call. |
| 1.3.6.1.4.1.251.1.1.9.4.1.7 | ColumnfraPConfigPriority | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.4.1.8 | ColumnfraPConfigSuba | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.4.1.9 | ColumnfraPConfigSaddr | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.4.1.10 | ColumnfraPConfigValidity | read-write | mandatory | Provides a way of deleting a row in the table when set to invalid. |
| 1.3.6.1.4.1.251.1.1.9.4.1.11 | ColumnfraPConfigDxivpi | read-write | mandatory | This is the VPI for the PVC |
| 1.3.6.1.4.1.251.1.1.9.4.1.12 | ColumnfraPConfigDxivci | read-write | mandatory | This is the VCI for the PVC |
| 1.3.6.1.4.1.251.1.1.9.4.1.13 | ColumnfraPConfigDximode | read-write | mandatory | This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored |
| 1.3.6.1.4.1.251.1.1.9.5 | TablefrbPStatTable | not-accessible | mandatory | This table shows statistics about the Frame Relay PVCs for link 1. |
| 1.3.6.1.4.1.251.1.1.9.5.1 | RowfrbPStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.5.1.1 | ColumnfrbPStatDlci | read-only | mandatory | This is the DLCI for the PVC. |
| 1.3.6.1.4.1.251.1.1.9.5.1.2 | ColumnfrbPStatRxBCnt | read-only | mandatory | The number of bytes received. |
| 1.3.6.1.4.1.251.1.1.9.5.1.3 | ColumnfrbPStatTxBCnt | read-only | mandatory | The number of bytes transmitted. |
| 1.3.6.1.4.1.251.1.1.9.5.1.4 | ColumnfrbPStatRxFCnt | read-only | mandatory | The number of frames received. |
| 1.3.6.1.4.1.251.1.1.9.5.1.5 | ColumnfrbPStatTxFCnt | read-only | mandatory | The number of frames transmitted. |
| 1.3.6.1.4.1.251.1.1.9.5.1.6 | ColumnfrbPStatRxBRate | read-only | mandatory | The rate of bytes being received. |
| 1.3.6.1.4.1.251.1.1.9.5.1.7 | ColumnfrbPStatTxBRate | read-only | mandatory | The rate of bytes being transmitted. |
| 1.3.6.1.4.1.251.1.1.9.5.1.8 | ColumnfrbPStatRxFRate | read-only | mandatory | The rate of frames being received. |
| 1.3.6.1.4.1.251.1.1.9.5.1.9 | ColumnfrbPStatTxFRate | read-only | mandatory | The rate of frames being transmitted. |
| 1.3.6.1.4.1.251.1.1.9.5.1.10 | ColumnfrbPStatDERxF | read-only | mandatory | The count of discarded eligible received frames. |
| 1.3.6.1.4.1.251.1.1.9.5.1.11 | ColumnfrbPStatDisRxF | read-only | mandatory | The count of discarded received frames. |
| 1.3.6.1.4.1.251.1.1.9.5.1.12 | ColumnfrbPStatPvcStat | read-only | mandatory | The state of the PVC. |
| 1.3.6.1.4.1.251.1.1.9.5.1.13 | ColumnfrbPStatLinkState | read-only | mandatory | The state of the link. |
| 1.3.6.1.4.1.251.1.1.9.5.1.14 | ColumnfrbPStatLocSeq | read-only | mandatory | The local send sequence. |
| 1.3.6.1.4.1.251.1.1.9.5.1.15 | ColumnfrbPStatLocAck | read-only | mandatory | The local acknowledge number. |
| 1.3.6.1.4.1.251.1.1.9.5.1.16 | ColumnfrbPStatLocStat | read-only | mandatory | The local state of the link. |
| 1.3.6.1.4.1.251.1.1.9.5.1.17 | ColumnfrbPStatLocStartT | read-only | mandatory | The local start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.5.1.18 | ColumnfrbPStatLocErrThr | read-only | mandatory | The local error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.5.1.19 | ColumnfrbPStatLocMec | read-only | mandatory | The local monitored event Counter. |
| 1.3.6.1.4.1.251.1.1.9.5.1.20 | ColumnfrbPStatLocPoll | read-only | mandatory | The local poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.5.1.21 | ColumnfrbPStatRemSeq | read-only | mandatory | The remote send sequence. |
| 1.3.6.1.4.1.251.1.1.9.5.1.22 | ColumnfrbPStatRemAck | read-only | mandatory | The remote acknowledge number. |
| 1.3.6.1.4.1.251.1.1.9.5.1.23 | ColumnfrbPStatRemStat | read-only | mandatory | The remote state of the link. |
| 1.3.6.1.4.1.251.1.1.9.5.1.24 | ColumnfrbPStatRemStartT | read-only | mandatory | The remote start time for poll. |
| 1.3.6.1.4.1.251.1.1.9.5.1.25 | ColumnfrbPStatRemErrThr | read-only | mandatory | The remote error threshold Counter. |
| 1.3.6.1.4.1.251.1.1.9.5.1.26 | ColumnfrbPStatRemMec | read-only | mandatory | The remote monitored event Counter. |
| 1.3.6.1.4.1.251.1.1.9.5.1.27 | ColumnfrbPStatRemPoll | read-only | mandatory | The remote poll Counter for DTE. |
| 1.3.6.1.4.1.251.1.1.9.5.1.29 | ColumnfrbPStatLastChangeM2 | read-only | mandatory | The date and time of last state change. |
| 1.3.6.1.4.1.251.1.1.9.6 | TablefrbPConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.6.1 | RowfrbPConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.6.1.1 | ColumnfrbPConfigDlci | read-write | mandatory | This is the DLCI for the PVC. |
| 1.3.6.1.4.1.251.1.1.9.6.1.2 | ColumnfrbPConfigCir | read-write | mandatory | The committed information rate. |
| 1.3.6.1.4.1.251.1.1.9.6.1.3 | ColumnfrbPConfigCommitB | read-write | mandatory | The committed burst rate. |
| 1.3.6.1.4.1.251.1.1.9.6.1.4 | ColumnfrbPConfigExcessB | read-write | mandatory | The excess burst size. |
| 1.3.6.1.4.1.251.1.1.9.6.1.5 | ColumnfrbVpi | read-only | mandatory | The VPI for this call. |
| 1.3.6.1.4.1.251.1.1.9.6.1.6 | ColumnfrbVci | read-only | mandatory | The VCI for the call. |
| 1.3.6.1.4.1.251.1.1.9.6.1.7 | ColumnfrbPConfigPriority | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.6.1.8 | ColumnfrbPConfigSuba | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.6.1.9 | ColumnfrbPConfigSaddr | read-only | mandatory | |
| 1.3.6.1.4.1.251.1.1.9.6.1.10 | ColumnfrbPConfigValidity | read-write | mandatory | Provides a way of deleting a row in the table when set to invalid. |
| 1.3.6.1.4.1.251.1.1.9.6.1.11 | ColumnfrbPConfigDxivpi | read-write | mandatory | This is the VPI for the PVC |
| 1.3.6.1.4.1.251.1.1.9.6.1.12 | ColumnfrbPConfigDxivci | read-write | mandatory | This is the VCI for the PVC |
| 1.3.6.1.4.1.251.1.1.9.6.1.13 | ColumnfrbPConfigDximode | read-write | mandatory | This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored |
| 1.3.6.1.4.1.251.1.1.10 | Nodedv2VcStatus | |||
| 1.3.6.1.4.1.251.1.1.10.3 | TablevcaTable | not-accessible | mandatory | This table shows detailed status for native ATM slot controller card link A VCs. |
| 1.3.6.1.4.1.251.1.1.10.3.1 | RowvcaEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.10.3.1.1 | ColumnvcaVpi | read-only | mandatory | Virtual path identifier for the VC. |
| 1.3.6.1.4.1.251.1.1.10.3.1.2 | ColumnvcaVci | read-only | mandatory | Virtual channel identifier for the VC. |
| 1.3.6.1.4.1.251.1.1.10.3.1.3 | ColumnvcaTxGCells | read-only | mandatory | Number of transmitted good cells CLP0. |
| 1.3.6.1.4.1.251.1.1.10.3.1.4 | ColumnvcaTxGCellsClp1 | read-only | mandatory | Number of transmitted good cells CLP1. |
| 1.3.6.1.4.1.251.1.1.10.3.1.5 | ColumnvcaRxGCells | read-only | mandatory | Number of received good cells. |
| 1.3.6.1.4.1.251.1.1.10.3.1.6 | ColumnvcaExcessCells | read-only | mandatory | Number of cells discarded because of bucket overflow. |
| 1.3.6.1.4.1.251.1.1.10.3.1.7 | ColumnvcaPeakExceeds | read-only | mandatory | Number of cells discarded because of peak cell rate violation. |
| 1.3.6.1.4.1.251.1.1.10.3.1.8 | ColumnvcaCellHead | read-only | mandatory | This value is bitwise OR'd with the cell header. |
| 1.3.6.1.4.1.251.1.1.10.3.1.9 | ColumnvcaCellMask | read-only | mandatory | This value is bitwise AND'd with the cell header. |
| 1.3.6.1.4.1.251.1.1.10.3.1.10 | ColumnvcaCellSwitchHead | read-only | mandatory | This comprises a tag which is added to the cell before putting into the cell switch and a control byte. |
| 1.3.6.1.4.1.251.1.1.10.3.1.11 | ColumnvcaStartTime | read-only | mandatory | This is the bucket start time. |
| 1.3.6.1.4.1.251.1.1.10.3.1.12 | ColumnvcaBucketControl | read-only | mandatory | This is the bucket control register value. |
| 1.3.6.1.4.1.251.1.1.10.3.1.13 | ColumnvcaBucket0CV | read-only | mandatory | The current value of bucket 0. |
| 1.3.6.1.4.1.251.1.1.10.3.1.14 | ColumnvcaBucket0Max | read-only | mandatory | The maximum value of bucket 0. |
| 1.3.6.1.4.1.251.1.1.10.3.1.15 | ColumnvcaBucket0Inc | read-only | mandatory | The bucket 0 increment value. |
| 1.3.6.1.4.1.251.1.1.10.3.1.16 | ColumnvcaBucket1CV | read-only | mandatory | The current value of bucket 1. |
| 1.3.6.1.4.1.251.1.1.10.3.1.17 | ColumnvcaBucket1Max | read-only | mandatory | The maximum value of bucket 1. |
| 1.3.6.1.4.1.251.1.1.10.3.1.18 | ColumnvcaBucket1Inc | read-only | mandatory | The bucket 1 increment value. |
| 1.3.6.1.4.1.251.1.1.10.3.1.19 | ColumnvcaBucket2CV | read-only | mandatory | The current value of bucket 2. |
| 1.3.6.1.4.1.251.1.1.10.3.1.20 | ColumnvcaBucket2Max | read-only | mandatory | The maximum value of bucket 2. |
| 1.3.6.1.4.1.251.1.1.10.3.1.21 | ColumnvcaBucket2Inc | read-only | mandatory | The bucket 2 increment value. |
| 1.3.6.1.4.1.251.1.1.10.3.1.22 | ColumnvcaBucket3CV | read-only | mandatory | The current value of bucket 3. |
| 1.3.6.1.4.1.251.1.1.10.3.1.23 | ColumnvcaBucket3Max | read-only | mandatory | The maximum value of bucket 3. |
| 1.3.6.1.4.1.251.1.1.10.3.1.24 | ColumnvcaBucket3Inc | read-only | mandatory | The bucket 3 increment value. |
| 1.3.6.1.4.1.251.1.1.10.3.1.25 | ColumnvcaType | read-only | mandatory | Virtual channel type for the VC. |
| 1.3.6.1.4.1.251.1.1.10.3.1.26 | ColumnvcaDstSlot | read-only | mandatory | slot # this VC is going to |
| 1.3.6.1.4.1.251.1.1.10.3.1.27 | ColumnvcaDstLink | read-only | mandatory | link # this VC is going to |
| 1.3.6.1.4.1.251.1.1.10.3.1.28 | ColumnvcaDstVpi | read-only | mandatory | VPI this VC is destined for. |
| 1.3.6.1.4.1.251.1.1.10.3.1.29 | ColumnvcaDstVci | read-only | mandatory | VCI for this VC is destined for. |
| 1.3.6.1.4.1.251.1.1.10.3.1.30 | ColumnvcaInternalVpi | read-only | mandatory | Internal VPI |
| 1.3.6.1.4.1.251.1.1.10.3.1.31 | ColumnvcaInternalVci | read-only | mandatory | Internal VCI |
| 1.3.6.1.4.1.251.1.1.10.4 | TablevcbTable | not-accessible | mandatory | This table shows detailed status for native ATM slot controller card link B VCs. |
| 1.3.6.1.4.1.251.1.1.10.4.1 | RowvcbEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.10.4.1.1 | ColumnvcbVpi | read-only | mandatory | Virtual path identifier for the VC. |
| 1.3.6.1.4.1.251.1.1.10.4.1.2 | ColumnvcbVci | read-only | mandatory | Virtual channel identifier for the VC. |
| 1.3.6.1.4.1.251.1.1.10.4.1.3 | ColumnvcbTxGCells | read-only | mandatory | Number of transmitted good cells CLP0. |
| 1.3.6.1.4.1.251.1.1.10.4.1.4 | ColumnvcbTxGCellsClp1 | read-only | mandatory | Number of transmitted good cells CLP1. |
| 1.3.6.1.4.1.251.1.1.10.4.1.5 | ColumnvcbRxGCells | read-only | mandatory | Number of received good cells. |
| 1.3.6.1.4.1.251.1.1.10.4.1.6 | ColumnvcbExcessCells | read-only | mandatory | Number of cells discarded because of bucket overflow. |
| 1.3.6.1.4.1.251.1.1.10.4.1.7 | ColumnvcbPeakExceeds | read-only | mandatory | Number of cells discarded because of peak cell rate violation. |
| 1.3.6.1.4.1.251.1.1.10.4.1.8 | ColumnvcbCellHead | read-only | mandatory | This value is bitwise OR'd with the cell header. |
| 1.3.6.1.4.1.251.1.1.10.4.1.9 | ColumnvcbCellMask | read-only | mandatory | This value is bitwise AND'd with the cell header. |
| 1.3.6.1.4.1.251.1.1.10.4.1.10 | ColumnvcbCellSwitchHead | read-only | mandatory | This comprises a tag which is added to the cell before putting into the cell switch and a control byte. |
| 1.3.6.1.4.1.251.1.1.10.4.1.11 | ColumnvcbStartTime | read-only | mandatory | This is the bucket start time. |
| 1.3.6.1.4.1.251.1.1.10.4.1.12 | ColumnvcbBucketControl | read-only | mandatory | This is the bucket control register value. |
| 1.3.6.1.4.1.251.1.1.10.4.1.13 | ColumnvcbBucket0CV | read-only | mandatory | The current value of bucket 0. |
| 1.3.6.1.4.1.251.1.1.10.4.1.14 | ColumnvcbBucket0Max | read-only | mandatory | The maximum value of bucket 0. |
| 1.3.6.1.4.1.251.1.1.10.4.1.15 | ColumnvcbBucket0Inc | read-only | mandatory | The bucket 0 increment value. |
| 1.3.6.1.4.1.251.1.1.10.4.1.16 | ColumnvcbBucket1CV | read-only | mandatory | The current value of bucket 1. |
| 1.3.6.1.4.1.251.1.1.10.4.1.17 | ColumnvcbBucket1Max | read-only | mandatory | The maximum value of bucket 1. |
| 1.3.6.1.4.1.251.1.1.10.4.1.18 | ColumnvcbBucket1Inc | read-only | mandatory | The bucket 1 increment value. |
| 1.3.6.1.4.1.251.1.1.10.4.1.19 | ColumnvcbBucket2CV | read-only | mandatory | The current value of bucket 2. |
| 1.3.6.1.4.1.251.1.1.10.4.1.20 | ColumnvcbBucket2Max | read-only | mandatory | The maximum value of bucket 2. |
| 1.3.6.1.4.1.251.1.1.10.4.1.21 | ColumnvcbBucket2Inc | read-only | mandatory | The bucket 2 increment value. |
| 1.3.6.1.4.1.251.1.1.10.4.1.22 | ColumnvcbBucket3CV | read-only | mandatory | The current value of bucket 3. |
| 1.3.6.1.4.1.251.1.1.10.4.1.23 | ColumnvcbBucket3Max | read-only | mandatory | The maximum value of bucket 3. |
| 1.3.6.1.4.1.251.1.1.10.4.1.24 | ColumnvcbBucket3Inc | read-only | mandatory | The bucket 3 increment value. |
| 1.3.6.1.4.1.251.1.1.10.4.1.25 | ColumnvcbType | read-only | mandatory | Virtual channel type for the VC. |
| 1.3.6.1.4.1.251.1.1.10.4.1.26 | ColumnvcbDstSlot | read-only | mandatory | slot # this VC is going to |
| 1.3.6.1.4.1.251.1.1.10.4.1.27 | ColumnvcbDstLink | read-only | mandatory | link # this VC is going to |
| 1.3.6.1.4.1.251.1.1.10.4.1.28 | ColumnvcbDstVpi | read-only | mandatory | VPI this VC is destined for. |
| 1.3.6.1.4.1.251.1.1.10.4.1.29 | ColumnvcbDstVci | read-only | mandatory | VCI for this VC is destined for. |
| 1.3.6.1.4.1.251.1.1.10.4.1.30 | ColumnvcbInternalVpi | read-only | mandatory | Internal VPI |
| 1.3.6.1.4.1.251.1.1.10.4.1.31 | ColumnvcbInternalVci | read-only | mandatory | Internal VCI |
| 1.3.6.1.4.1.251.1.1.10.5 | TablexpStatTable | not-accessible | mandatory | This table shows status of the switch fabric interface. |
| 1.3.6.1.4.1.251.1.1.10.5.1 | RowxpStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.10.5.1.1 | ColumnxpIFace | read-only | mandatory | Switch fabric interface number. |
| 1.3.6.1.4.1.251.1.1.10.5.1.2 | ColumnxpRXCells | read-only | mandatory | Switch fabric received cell count. |
| 1.3.6.1.4.1.251.1.1.10.5.1.3 | ColumnxpTXCells | read-only | mandatory | Switch fabric transmit cell count. |
| 1.3.6.1.4.1.251.1.1.10.5.1.4 | ColumnxpBadVpiVci | read-only | mandatory | Number of cells with bad VCI/VPI received. |
| 1.3.6.1.4.1.251.1.1.10.5.1.5 | ColumnxpRxOverflow | read-only | mandatory | Number of receiver overflows. |
| 1.3.6.1.4.1.251.1.1.10.5.1.6 | ColumnxpTxHighPrOver | read-only | mandatory | Number of transmitted cells with high priority overflow. |
| 1.3.6.1.4.1.251.1.1.10.5.1.7 | ColumnxpTxLowPrOver | read-only | mandatory | Number of transmitted cells with low priority overflow. |
| 1.3.6.1.4.1.251.1.1.10.5.1.8 | ColumnxpInputOverflow | read-only | mandatory | Number of M68302 fabric input overflow cells. |
| 1.3.6.1.4.1.251.1.1.10.5.1.9 | ColumnxpDocErrors | read-only | mandatory | Number of DOC errors. |
| 1.3.6.1.4.1.251.1.1.10.5.1.10 | ColumnxpLowPriorityFifo | read-only | mandatory | Read transmit low priority FIFO count. |
| 1.3.6.1.4.1.251.1.1.10.5.1.11 | ColumnxpEgDiscCells | read-only | mandatory | Read transmit discard cell count. |
| 1.3.6.1.4.1.251.1.1.10.5.1.12 | ColumnxpIgDiscCells | read-only | mandatory | Read receive discard cell count. |
| 1.3.6.1.4.1.251.1.1.11 | Nodedv2PLPP | |||
| 1.3.6.1.4.1.251.1.1.11.1 | TableplppCTable | not-accessible | mandatory | This table is used to control PLPP configuration. |
| 1.3.6.1.4.1.251.1.1.11.1.1 | RowplppCEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.1.1.1 | ColumnplppCLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.11.1.1.2 | ColumnplppCLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.3 | ColumnplppCCPLCPMode | read-write | mandatory | The PLCP mode for link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.4 | ColumnplppCDS3Framer | read-write | mandatory | Set to yes(1) to enable the DS3 framer mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.5 | ColumnplppCScrambler | read-write | mandatory | Set to no(2) to disable the scrambler mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.6 | ColumnplppC0x55 | read-write | mandatory | If set to no(2) then HCS is not XORed with 0x55 |
| 1.3.6.1.4.1.251.1.1.11.1.1.7 | ColumnplppCCLine | read-write | mandatory | Control line processing for this link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.8 | ColumnplppCLoopback | read-write | mandatory | Set to yes(1) to enable loopback mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.1.1.12 | ColumnplppCSmdsMode | read-write | mandatory | Set to yes(1) to enable SMDS mode. |
| 1.3.6.1.4.1.251.1.1.11.1.1.13 | ColumnplppCPloadTypeLab | read-write | mandatory | Pay type label. |
| 1.3.6.1.4.1.251.1.1.11.1.1.14 | ColumnplppCTxTrlTrcIdLen | read-write | mandatory | Trail trace length for transmit and expected receive. |
| 1.3.6.1.4.1.251.1.1.11.1.1.15 | ColumnplppCTxTrcId | read-write | mandatory | Transmit trail trace identifier. |
| 1.3.6.1.4.1.251.1.1.11.1.1.16 | ColumnplppCRxExTrcId | read-write | mandatory | Receive expected trail trace identifier. |
| 1.3.6.1.4.1.251.1.1.11.2 | TableplppSTable | not-accessible | mandatory | The status table for plpp. |
| 1.3.6.1.4.1.251.1.1.11.2.1 | RowplppSEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.2.1.1 | ColumnplppSLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.11.2.1.2 | ColumnplppSCLines | read-only | mandatory | The state of control lines for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.3 | ColumnplppSTXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.4 | ColumnplppSRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.5 | ColumnplppSTXCells | read-only | mandatory | The transmit cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.6 | ColumnplppSRXCells | read-only | mandatory | The receive cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.7 | ColumnplppSHCSErrs | read-only | mandatory | The header checksum error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.11 | ColumnplppSFrameErrs | read-only | mandatory | The frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.12 | ColumnplppSBIP8Errs | read-only | mandatory | The BIP-8 error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.13 | ColumnplppSFEBEErrs | read-only | mandatory | The FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.14 | ColumnplppSSPLRStatus | read-only | mandatory | The SPLR Status Register Contents. |
| 1.3.6.1.4.1.251.1.1.11.2.1.15 | ColumnplppSDs3Lcvs | read-only | mandatory | The DS3 LCV count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.16 | ColumnplppSDs3FrameErrs | read-only | mandatory | The DS3 frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.17 | ColumnplppSDs3ParityErrs | read-only | mandatory | The DS3 parity error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.18 | ColumnplppSDs3CbitPrtyErrs | read-only | mandatory | The DS3 control bit parity error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.19 | ColumnplppSDs3FEBEErrs | read-only | mandatory | The DS3 FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.2.1.20 | ColumnplppSDs3RxAIS | read-only | mandatory | Receive DS3 AIS status. |
| 1.3.6.1.4.1.251.1.1.11.2.1.21 | ColumnplppSDs3RxRedAlarm | read-only | mandatory | Receive DS3 Red Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.2.1.22 | ColumnplppSDs3RxYellowAlarm | read-only | mandatory | Receive DS3 Yellow Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.2.1.23 | ColumnplppSPLCPRxYellowAlarm | read-only | mandatory | Receive PLCP Yellow Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.2.1.24 | ColumnplppsRxTrIdMis | read-only | mandatory | Receive trace id mismatch indication. |
| 1.3.6.1.4.1.251.1.1.11.2.1.25 | ColumnplppsRxTrIdUnst | read-only | mandatory | Receive trace id unstable indication. |
| 1.3.6.1.4.1.251.1.1.11.2.1.26 | ColumnplppsRxPloadTypeLabMis | read-only | mandatory | Receive payload type label mismatch indication. |
| 1.3.6.1.4.1.251.1.1.11.2.1.27 | ColumnplppsRxPloadTypeLabUnst | read-only | mandatory | Receive payload type label unstable indication. |
| 1.3.6.1.4.1.251.1.1.11.2.1.28 | ColumnplppsRxTrlTrc | read-only | mandatory | Last received trail trace message. |
| 1.3.6.1.4.1.251.1.1.11.3 | TableplppV2CTable | not-accessible | mandatory | This table is used to control DS3-2C PLPP configuration. |
| 1.3.6.1.4.1.251.1.1.11.3.1 | RowplppV2CEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.3.1.1 | ColumnplppV2CLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.11.3.1.2 | ColumnplppV2CLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.11.3.1.3 | ColumnplppV2CCPLCPMode | read-write | mandatory | Set to yes(1) to enable the PLCP layer mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.3.1.4 | ColumnplppV2CDS3Framer | read-write | mandatory | Set to yes(1) to enable the DS3 framer mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.3.1.5 | ColumnplppV2CScrambler | read-write | mandatory | Set to no(2) to disable the scrambler mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.3.1.6 | ColumnplppV2C0x55 | read-write | mandatory | If set to no(2) then HCS is not XORed with 0x55 |
| 1.3.6.1.4.1.251.1.1.11.3.1.7 | ColumnplppV2CLoopback | read-write | mandatory | Set to yes(1) to enable loopback mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.3.1.8 | ColumnplppV2CSmdsMode | read-write | mandatory | Set to yes(1) to enable SMDS mode. |
| 1.3.6.1.4.1.251.1.1.11.3.1.9 | ColumnplppV2CFrmFmt | read-write | mandatory | Set to yes(1) to enable C-bit parity framing format. |
| 1.3.6.1.4.1.251.1.1.11.3.1.10 | ColumnplppV2CTxAIS | read-write | mandatory | Set to yes(1) to enable framer to Txmt AIS. |
| 1.3.6.1.4.1.251.1.1.11.4 | TableplppV2STable | not-accessible | mandatory | The status table for DS3-2C plpp. |
| 1.3.6.1.4.1.251.1.1.11.4.1 | RowplppV2SEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.4.1.1 | ColumnplppV2SLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.11.4.1.2 | ColumnplppV2STXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.3 | ColumnplppV2SRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.4 | ColumnplppV2STXCells | read-only | mandatory | The transmit cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.5 | ColumnplppV2SRXCells | read-only | mandatory | The receive cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.6 | ColumnplppV2SHCSErrs | read-only | mandatory | The header checksum error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.7 | ColumnplppV2SFrameErrs | read-only | mandatory | The frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.8 | ColumnplppV2SBIP8Errs | read-only | mandatory | The BIP-8 error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.9 | ColumnplppV2SFEBEErrs | read-only | mandatory | The FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.10 | ColumnplppV2SSPLRStatus | read-only | mandatory | yes(1) indicates a PLCP LOF. |
| 1.3.6.1.4.1.251.1.1.11.4.1.11 | ColumnplppV2SDs3FrmFmt | read-only | mandatory | Operate in DS3 C-bit Parity or drop-back to Clear Channel. |
| 1.3.6.1.4.1.251.1.1.11.4.1.12 | ColumnplppV2SDs3Lcvs | read-only | mandatory | The DS3 LCV count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.13 | ColumnplppV2SDs3FrameErrs | read-only | mandatory | The DS3 frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.14 | ColumnplppV2SDs3ParityErrs | read-only | mandatory | The DS3 parity error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.15 | ColumnplppV2SDs3CbitPrtyErrs | read-only | mandatory | The DS3 control bit parity error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.16 | ColumnplppV2SDs3FEBEErrs | read-only | mandatory | The DS3 FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.4.1.17 | ColumnplppV2SDs3RxAIS | read-only | mandatory | Receive DS3 AIS status. |
| 1.3.6.1.4.1.251.1.1.11.4.1.18 | ColumnplppV2SDs3RxRedAlarm | read-only | mandatory | Receive DS3 Red Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.4.1.19 | ColumnplppV2SDs3RxYellowAlarm | read-only | mandatory | Receive DS3 Yellow Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.4.1.20 | ColumnplppV2SPLCPRxYellowAlarm | read-only | mandatory | Receive PLCP Yellow Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.4.1.21 | ColumnplppV2SDs3FEACTxmt | read-only | mandatory | Code that has been transmitted as a FEAC. |
| 1.3.6.1.4.1.251.1.1.11.4.1.22 | ColumnplppV2SRxIDL | read-only | mandatory | yes(1) indicates an IDLE has been received. |
| 1.3.6.1.4.1.251.1.1.11.4.1.23 | ColumnplppV2SLOC | read-only | mandatory | Receive Loss of cell delineation. |
| 1.3.6.1.4.1.251.1.1.11.4.1.24 | ColumnplppV2SDs3LPBK | read-only | mandatory | if yes(1), the DS3 Framer is in loopback. |
| 1.3.6.1.4.1.251.1.1.11.5 | TableplppE1CTable | not-accessible | mandatory | This table to control the E1-2C PLPP configuration. |
| 1.3.6.1.4.1.251.1.1.11.5.1 | RowplppE1CEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.5.1.1 | ColumnplppE1CLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.11.5.1.2 | ColumnplppE1CLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.11.5.1.3 | ColumnplppE1CScrambler | read-write | mandatory | Set to no(2) to disable the scrambler mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.5.1.4 | ColumnplppE1C0x55 | read-write | mandatory | If set to no(2) then HCS is not XORed with 0x55 |
| 1.3.6.1.4.1.251.1.1.11.5.1.5 | ColumnplppE1CSmdsMode | read-write | mandatory | Set to yes(1) to enable SMDS mode. |
| 1.3.6.1.4.1.251.1.1.11.5.1.6 | ColumnplppE1CLpbk | read-write | mandatory | Set to yes(1) to enable DOC Framer loopback. |
| 1.3.6.1.4.1.251.1.1.11.6 | TableplppE1STable | not-accessible | mandatory | The status table for E1-2C plpp. |
| 1.3.6.1.4.1.251.1.1.11.6.1 | RowplppE1SEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.6.1.1 | ColumnplppE1SLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.11.6.1.2 | ColumnplppE1STXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.3 | ColumnplppE1SRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.4 | ColumnplppE1STXCells | read-only | mandatory | The transmit cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.5 | ColumnplppE1SRXCells | read-only | mandatory | The receive cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.6 | ColumnplppE1SHCSErrs | read-only | mandatory | The HCS error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.7 | ColumnplppE1SCRCErrs | read-only | mandatory | The CRC-4 error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.8 | ColumnplppE1SFrameErrs | read-only | mandatory | The frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.9 | ColumnplppE1SFEBEErrs | read-only | mandatory | The FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.10 | ColumnplppE1SLcvs | read-only | mandatory | The E1 LCV count for this link. |
| 1.3.6.1.4.1.251.1.1.11.6.1.11 | ColumnplppE1SRxAIS | read-only | mandatory | Receive E1 AIS status. |
| 1.3.6.1.4.1.251.1.1.11.6.1.12 | ColumnplppE1SRxOOF | read-only | mandatory | Receive E1 OOF status. |
| 1.3.6.1.4.1.251.1.1.11.6.1.13 | ColumnplppE1SRxLOS | read-only | mandatory | Receive E1 LOS status. |
| 1.3.6.1.4.1.251.1.1.11.6.1.14 | ColumnplppE1SRxLOF | read-only | mandatory | Receive E1 LOF status. |
| 1.3.6.1.4.1.251.1.1.11.6.1.15 | ColumnplppE1SFerf | read-only | mandatory | Receiving a Far-End Receive Failure if yes. |
| 1.3.6.1.4.1.251.1.1.11.7 | TableplppE3CTable | not-accessible | mandatory | This table is used to control the E3-2C PLPP configuration. |
| 1.3.6.1.4.1.251.1.1.11.7.1 | RowplppE3CEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.7.1.1 | ColumnplppE3CLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.11.7.1.2 | ColumnplppE3CLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.11.7.1.3 | ColumnplppE3CFramer | read-write | mandatory | The E3 framer mode for the link. |
| 1.3.6.1.4.1.251.1.1.11.7.1.4 | ColumnplppE3CPLCPMode | read-write | mandatory | The PLCP mode for the link. |
| 1.3.6.1.4.1.251.1.1.11.7.1.5 | ColumnplppE3CScrambler | read-write | mandatory | Set to no(2) to disable the scrambler mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.7.1.6 | ColumnplppE3C0x55 | read-write | mandatory | If set to no(2) then HCS is not XORed with 0x55 |
| 1.3.6.1.4.1.251.1.1.11.7.1.7 | ColumnplppE3CLoopback | read-write | mandatory | Set to yes(1) to enable loopback mode for this link. |
| 1.3.6.1.4.1.251.1.1.11.7.1.8 | ColumnplppE3CSmdsMode | read-write | mandatory | Set to yes(1) to enable SMDS mode. |
| 1.3.6.1.4.1.251.1.1.11.7.1.9 | ColumnplppE3CTxmtTimMk | read-write | mandatory | Set to yes(1) if traceable to primary ref clk. |
| 1.3.6.1.4.1.251.1.1.11.7.1.10 | ColumnplppE3CPloadTypeLab | read-write | mandatory | Payload type label. |
| 1.3.6.1.4.1.251.1.1.11.7.1.11 | ColumnplppE3CTxTrlTrcIdLen | read-write | mandatory | Trail trace length for transmit and expected receive. |
| 1.3.6.1.4.1.251.1.1.11.7.1.12 | ColumnplppE3CTxTrcIdUH | read-write | mandatory | Transmit trail trace ID upper half. |
| 1.3.6.1.4.1.251.1.1.11.7.1.13 | ColumnplppE3CTxTrcIdLH | read-write | mandatory | Transmit trail trace ID lower half. |
| 1.3.6.1.4.1.251.1.1.11.7.1.14 | ColumnplppE3CRxExTrcIdUH | read-write | mandatory | Receive expected trail trace ID upper half. |
| 1.3.6.1.4.1.251.1.1.11.7.1.15 | ColumnplppE3CRxExTrcIdLH | read-write | mandatory | Receive expected trail trace ID lower half. |
| 1.3.6.1.4.1.251.1.1.11.8 | TableplppE3STable | not-accessible | mandatory | The E3-2C status table for plpp. |
| 1.3.6.1.4.1.251.1.1.11.8.1 | RowplppE3SEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.11.8.1.1 | ColumnplppE3SLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.2 | ColumnplppE3STXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.3 | ColumnplppE3SRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.4 | ColumnplppE3STXCells | read-only | mandatory | The transmit cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.5 | ColumnplppE3SRXCells | read-only | mandatory | The receive cells count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.6 | ColumnplppE3SHCSErrs | read-only | mandatory | The header checksum error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.7 | ColumnplppE3SE3FrameErrs | read-only | mandatory | The E3 frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.8 | ColumnplppE3SPLCPFrameErrs | read-only | mandatory | The PLCP frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.9 | ColumnplppE3SBIP8Errs | read-only | mandatory | The BIP-8 error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.10 | ColumnplppE3SFEBEErrs | read-only | mandatory | The FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.11 | ColumnplppE3SLcvs | read-only | mandatory | The E3 LCV count for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.12 | ColumnplppE3SLcd | read-only | mandatory | Receive Loss of cell delineation. |
| 1.3.6.1.4.1.251.1.1.11.8.1.13 | ColumnplppE3SRxTrlTrc | read-only | mandatory | Last received trail trace message. |
| 1.3.6.1.4.1.251.1.1.11.8.1.14 | ColumnplppE3SRxAIS | read-only | mandatory | Receive E3 AIS status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.15 | ColumnplppE3SRxOOF | read-only | mandatory | Receive E3 OOF status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.16 | ColumnplppE3SRxLOS | read-only | mandatory | Receive E3 LOS status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.17 | ColumnplppE3SRxLOF | read-only | mandatory | Receive E3 LOF status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.18 | ColumnplppE3SRxFERF | read-only | mandatory | Receive E3 FERF status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.19 | ColumnplppE3SPLCPRxLof | read-only | mandatory | The PLCP Rx LOF for this link. |
| 1.3.6.1.4.1.251.1.1.11.8.1.20 | ColumnplppE3SPLCPRxYellowAlarm | read-only | mandatory | Receive PLCP Yellow Alarm status. |
| 1.3.6.1.4.1.251.1.1.11.8.1.21 | ColumnplppE3SRxTrIdMis | read-only | mandatory | Receive trace id mismatch indication. |
| 1.3.6.1.4.1.251.1.1.11.8.1.22 | ColumnplppE3SRxTrIdUnst | read-only | mandatory | Receive trace id unstable indication. |
| 1.3.6.1.4.1.251.1.1.11.8.1.23 | ColumnplppE3SRxPloadTypeLabMis | read-only | mandatory | Receive payload type label mismatch indication. |
| 1.3.6.1.4.1.251.1.1.11.8.1.24 | ColumnplppE3SRxPloadTypeLabUnst | read-only | mandatory | Receive payload type label unstable indication. |
| 1.3.6.1.4.1.251.1.1.12 | Nodedv2LocalFibre | |||
| 1.3.6.1.4.1.251.1.1.12.1 | TablelFibreConfTable | not-accessible | mandatory | This table contains configuration information for the LFDOC. |
| 1.3.6.1.4.1.251.1.1.12.1.1 | RowlFibreConfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.12.1.1.1 | ColumnlFibreConfLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.12.1.1.2 | ColumnlFibreConfLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.12.1.1.3 | ColumnlFibreConfCLine | read-write | mandatory | Set to ignored(2) to stop control line processing for this link. |
| 1.3.6.1.4.1.251.1.1.12.1.1.4 | ColumnlFibreConfLoopback | read-write | mandatory | Set to yes(1) to enable loopback mode for this link. |
| 1.3.6.1.4.1.251.1.1.12.2 | TablelFibreStatTable | not-accessible | mandatory | This table contains status information for the LFDOC |
| 1.3.6.1.4.1.251.1.1.12.2.1 | RowlFibreStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.12.2.1.1 | ColumnlFibreStatLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.12.2.1.2 | ColumnlFibreStatCLines | read-only | mandatory | The state of control lines for this link. |
| 1.3.6.1.4.1.251.1.1.12.2.1.3 | ColumnlFibreStatHCSErrs | read-only | mandatory | The header checksum error count for this link. |
| 1.3.6.1.4.1.251.1.1.13 | Nodedv2DS | |||
| 1.3.6.1.4.1.251.1.1.13.1 | Tableds1Table | not-accessible | mandatory | ds1 Status Table |
| 1.3.6.1.4.1.251.1.1.13.1.1 | Rowds1Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.1.1.1 | Columnds1LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.1.1.2 | Columnds1LineLength | read-write | mandatory | Length of the line connected to the physical interface. |
| 1.3.6.1.4.1.251.1.1.13.1.1.3 | Columnds1Framing | read-write | mandatory | T1 Framing type. |
| 1.3.6.1.4.1.251.1.1.13.1.1.4 | Columnds1Coding | read-write | mandatory | The line code of incoming DS1 signal. ami(2) selects AMI line code. |
| 1.3.6.1.4.1.251.1.1.13.1.1.5 | Columnds1Tr | read-write | mandatory | Set to yes(1) to enable transmit loop-back. |
| 1.3.6.1.4.1.251.1.1.13.1.1.6 | Columnds1Rt | read-write | mandatory | Set to yes(1) to enable receive loop-back. |
| 1.3.6.1.4.1.251.1.1.13.1.1.7 | Columnds1LOSDefect | read-only | mandatory | Loss of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.1.1.8 | Columnds1AISDefect | read-only | mandatory | AIS Defect |
| 1.3.6.1.4.1.251.1.1.13.1.1.9 | Columnds1OOFDefect | read-only | mandatory | OOF Defect |
| 1.3.6.1.4.1.251.1.1.13.1.1.10 | Columnds1YellowDefect | read-only | mandatory | Yellow Defect |
| 1.3.6.1.4.1.251.1.1.13.1.1.11 | Columnds1LOSAlarm | read-only | mandatory | Loss Of Signal alarm |
| 1.3.6.1.4.1.251.1.1.13.1.1.12 | Columnds1AISAlarm | read-only | mandatory | AIS alarm |
| 1.3.6.1.4.1.251.1.1.13.1.1.13 | Columnds1LOFAlarm | read-only | mandatory | Loss Of Frame alarm |
| 1.3.6.1.4.1.251.1.1.13.1.1.14 | Columnds1YellowAlarm | read-only | mandatory | Yellow alarm |
| 1.3.6.1.4.1.251.1.1.13.1.1.15 | Columnds1PdvCount | read-only | mandatory | Number of pulse density violations detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.16 | Columnds1Z16Count | read-only | mandatory | Number of 16 consecutive zeroes detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.17 | Columnds1LcvCount | read-only | mandatory | Number of line code violations detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.18 | Columnds1BeeCount | read-only | mandatory | Number of block error events detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.19 | Columnds1FerCount | read-only | mandatory | Number of framing bit error events detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.20 | Columnds1OofCount | read-only | mandatory | Number of out of frame events detected. |
| 1.3.6.1.4.1.251.1.1.13.1.1.21 | Columnds1ClrStats | read-write | mandatory | Clear counters |
| 1.3.6.1.4.1.251.1.1.13.1.1.22 | Columnds1Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.1.1.23 | Columnds1LineES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.24 | Columnds1LineSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.25 | Columnds1ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.26 | Columnds1SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.27 | Columnds1AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.28 | Columnds1UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.13.1.1.29 | Columnds1TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.1.1.30 | Columnds1ExBERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.13.1.1.31 | Columnds1ExBERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.13.2 | Tableds3Table | not-accessible | mandatory | ds3 Status Table |
| 1.3.6.1.4.1.251.1.1.13.2.1 | Rowds3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.2.1.1 | Columnds3LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.2.1.2 | Columnds3Lb | read-only | mandatory | Loop-back mode active. |
| 1.3.6.1.4.1.251.1.1.13.2.1.3 | Columnds3Err | read-only | mandatory | AIS or BPV detected. |
| 1.3.6.1.4.1.251.1.1.13.2.1.4 | Columnds3RXLos | read-only | mandatory | Receive loss of signal. |
| 1.3.6.1.4.1.251.1.1.13.2.1.5 | Columnds3TXLoc | read-only | mandatory | Transmit loss of clock. |
| 1.3.6.1.4.1.251.1.1.13.2.1.6 | Columnds3RXErr | read-only | mandatory | Receive error detected. |
| 1.3.6.1.4.1.251.1.1.13.2.1.7 | Columnds3RXAis | read-write | mandatory | Set to yes(1) to generate a receive AIS alarm. |
| 1.3.6.1.4.1.251.1.1.13.2.1.8 | Columnds3TXAis | read-write | mandatory | Set to yes(1) to transmit an AIS alarm. |
| 1.3.6.1.4.1.251.1.1.13.2.1.9 | Columnds3TXLev | read-write | mandatory | Transmit level. |
| 1.3.6.1.4.1.251.1.1.13.2.1.10 | Columnds3Tr | read-write | mandatory | Transmit loop-back. |
| 1.3.6.1.4.1.251.1.1.13.2.1.11 | Columnds3Rt | read-write | mandatory | Set to yes(1) to enable receive loop-back. |
| 1.3.6.1.4.1.251.1.1.13.2.1.12 | Columnds3Equal | read-write | mandatory | Equalisation type. |
| 1.3.6.1.4.1.251.1.1.13.2.1.13 | Columnds3LOSAlarm | read-only | mandatory | Loss Of Signal Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.2.1.14 | Columnds3Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.5 | Tablee1Table | not-accessible | mandatory | E1-2C Config/Status Table |
| 1.3.6.1.4.1.251.1.1.13.5.1 | Rowe1Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.5.1.1 | Columne1LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.5.1.2 | Columne1LimType | read-only | mandatory | LIM I.D. type |
| 1.3.6.1.4.1.251.1.1.13.5.1.3 | Columne1Lb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.13.5.1.4 | Columne1FRMRMode | read-write | mandatory | e1 Framing options. |
| 1.3.6.1.4.1.251.1.1.13.5.1.5 | Columne1TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.5.1.6 | Columne1TS16PayLd | read-write | mandatory | Employ TimeSlot 16 for customer data. |
| 1.3.6.1.4.1.251.1.1.13.5.1.7 | Columne1TxAIS | read-write | mandatory | Transmit the AIS State. |
| 1.3.6.1.4.1.251.1.1.13.5.1.8 | Columne1GappedClk | read-write | mandatory | Select 1,(yes) for Circuit-emulation. |
| 1.3.6.1.4.1.251.1.1.13.5.1.9 | Columne1IntrfType | read-write | mandatory | E1 Framing options. |
| 1.3.6.1.4.1.251.1.1.13.5.1.10 | Columne1ClrStats | read-write | mandatory | Clear Counters |
| 1.3.6.1.4.1.251.1.1.13.5.1.11 | Columne1Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.5.1.12 | Columnse1SA4 | read-write | mandatory | Nat'l bit Sa4 |
| 1.3.6.1.4.1.251.1.1.13.5.1.13 | Columnse1SA5 | read-write | mandatory | Nat'l bit Sa5 |
| 1.3.6.1.4.1.251.1.1.13.5.1.14 | Columnse1SA6 | read-write | mandatory | Nat'l bit Sa6 |
| 1.3.6.1.4.1.251.1.1.13.5.1.15 | Columnse1SA7 | read-write | mandatory | Nat'l bit Sa7 |
| 1.3.6.1.4.1.251.1.1.13.5.1.16 | Columnse1SA8 | read-write | mandatory | Nat'l bit Sa8 |
| 1.3.6.1.4.1.251.1.1.13.5.1.17 | Columnse1SI0 | read-write | mandatory | Int'l bit Si0 |
| 1.3.6.1.4.1.251.1.1.13.5.1.18 | Columnse1SI1 | read-write | mandatory | Nat'l bit Si1 |
| 1.3.6.1.4.1.251.1.1.13.5.1.22 | Columne1LOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.5.1.23 | Columne1OOFDefect | read-only | mandatory | Receive Out Of Frame |
| 1.3.6.1.4.1.251.1.1.13.5.1.24 | Columne1AISDefect | read-only | mandatory | Receive AIS Defect |
| 1.3.6.1.4.1.251.1.1.13.5.1.25 | Columne1FerfDefect | read-only | mandatory | Receive Yellow Defect |
| 1.3.6.1.4.1.251.1.1.13.5.1.26 | Columne1ExBERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.13.5.1.37 | Columne1LOSAlarm | read-only | mandatory | Loss Of Signal Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.5.1.38 | Columne1LOFAlarm | read-only | mandatory | Loss Of Frame Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.5.1.39 | Columne1AISAlarm | read-only | mandatory | AIS Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.5.1.40 | Columne1FerfAlarm | read-only | mandatory | Yellow Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.5.1.41 | Columne1ExBERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.13.5.1.52 | Columne1SCRCErrs | read-only | mandatory | The CRC-4 error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.5.1.53 | Columne1SFrameErrs | read-only | mandatory | The frame error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.5.1.54 | Columne1SFEBEErrs | read-only | mandatory | The FEBE error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.5.1.55 | Columne1SLcvs | read-only | mandatory | The E1 LCV count for this link. |
| 1.3.6.1.4.1.251.1.1.13.5.1.66 | Columne1LineES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.5.1.67 | Columne1LineSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.5.1.68 | Columne1ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.5.1.69 | Columne1SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.5.1.70 | Columne1AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.13.5.1.71 | Columne1UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.13.7 | TablesoTable | not-accessible | mandatory | SOLIM/DELIM Status Table |
| 1.3.6.1.4.1.251.1.1.13.7.1 | RowsoEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.7.1.1 | ColumnsoLinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.7.1.2 | ColumnsoLimType | read-only | mandatory | Solim version |
| 1.3.6.1.4.1.251.1.1.13.7.1.3 | ColumnsoTimingRef | read-write | mandatory | Local timing reference |
| 1.3.6.1.4.1.251.1.1.13.7.1.4 | ColumnsoTxEn0 | read-write | mandatory | Link 0 Tx Enable (v2 and above) |
| 1.3.6.1.4.1.251.1.1.13.7.1.5 | ColumnsoTxEn1 | read-write | mandatory | Link 1 Tx Enable (v2 and above) |
| 1.3.6.1.4.1.251.1.1.13.7.1.6 | ColumnsoLimDesc | read-write | mandatory | LIM Description |
| 1.3.6.1.4.1.251.1.1.13.7.1.7 | ColumnsoReconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.9 | Tableds1V2Table | not-accessible | mandatory | ds1 V2 Status Table |
| 1.3.6.1.4.1.251.1.1.13.9.1 | Rowds1V2Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.9.1.1 | Columnds1V2LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.9.1.2 | Columnds1V2LimType | read-only | mandatory | LIM I.D. type |
| 1.3.6.1.4.1.251.1.1.13.9.1.3 | Columnds1V2TxLineLn | read-write | mandatory | Select txmt line length. |
| 1.3.6.1.4.1.251.1.1.13.9.1.4 | Columnds1V2FRMRMode | read-write | mandatory | ds1V2 Framing options. |
| 1.3.6.1.4.1.251.1.1.13.9.1.5 | Columnds1V2Coding | read-write | mandatory | If Line Coding is yes(1), AMI is selected |
| 1.3.6.1.4.1.251.1.1.13.9.1.6 | Columnds1V2Lb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.13.9.1.7 | Columnds1V2TxAIS | read-write | mandatory | Transmit the AIS State. |
| 1.3.6.1.4.1.251.1.1.13.9.1.8 | Columnds1V2GappedClk | read-write | mandatory | Select 1,(yes) for Circuit-emulation. |
| 1.3.6.1.4.1.251.1.1.13.9.1.9 | Columnds1V2TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.9.1.10 | Columnds1V2ClrStats | read-write | mandatory | Clear Counters |
| 1.3.6.1.4.1.251.1.1.13.9.1.11 | Columnds1V2Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.9.1.22 | Columnds1V2LOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.9.1.23 | Columnds1V2OOFDefect | read-only | mandatory | Receive Out Of Frame |
| 1.3.6.1.4.1.251.1.1.13.9.1.24 | Columnds1V2AISDefect | read-only | mandatory | Receive AIS Defect |
| 1.3.6.1.4.1.251.1.1.13.9.1.25 | Columnds1V2FerfDefect | read-only | mandatory | Receive FERF(Yellow) Defect |
| 1.3.6.1.4.1.251.1.1.13.9.1.26 | Columnds1V2BERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.13.9.1.37 | Columnds1V2LOSAlarm | read-only | mandatory | Loss Of Signal Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.9.1.38 | Columnds1V2LOFAlarm | read-only | mandatory | Loss Of Frame Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.9.1.39 | Columnds1V2AISAlarm | read-only | mandatory | AIS Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.9.1.40 | Columnds1V2FerfAlarm | read-only | mandatory | Yellow Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.9.1.41 | Columnds1V2BERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.13.9.1.52 | Columnds1V2FerCount | read-only | mandatory | The framing bit error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.9.1.53 | Columnds1V2BeeCount | read-only | mandatory | The bit error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.9.1.54 | Columnds1V2OCfCount | read-only | mandatory | The Out-of-frame or Change of Frame alignment error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.9.1.55 | Columnds1V2LcvCount | read-only | mandatory | The DS1 Line code violations count for this link. |
| 1.3.6.1.4.1.251.1.1.13.9.1.66 | Columnds1V2LineES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.67 | Columnds1V2LineSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.68 | Columnds1V2ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.69 | Columnds1V2SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.70 | Columnds1V2AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.71 | Columnds1V2UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.13.9.1.72 | Columnds1V2ExBER | read-only | mandatory | Excessive Bit Error Rate |
| 1.3.6.1.4.1.251.1.1.13.10 | ScalardlimLpbkTimeout | read-write | mandatory | This parameter is used to set the dlim loopback timeout in minutes. |
| 1.3.6.1.4.1.251.1.1.13.11 | Tableds3V2Table | not-accessible | mandatory | ds3-2C Config/Status Table |
| 1.3.6.1.4.1.251.1.1.13.11.1 | Rowds3V2Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.11.1.1 | Columnds3V2LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.11.1.2 | Columnds3V2Lb | read-write | mandatory | Loopback Active |
| 1.3.6.1.4.1.251.1.1.13.11.1.3 | Columnds3V2LimType | read-only | mandatory | LIM I.D. type |
| 1.3.6.1.4.1.251.1.1.13.11.1.4 | Columnds3V2LimOK | read-only | mandatory | LIM OK. |
| 1.3.6.1.4.1.251.1.1.13.11.1.5 | Columnds3V2TxLBO | read-write | mandatory | Transmit line build-out,(1)for short cables. |
| 1.3.6.1.4.1.251.1.1.13.11.1.6 | Columnds3V2TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.11.1.8 | Columnds3V2LOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.11.1.9 | Columnds3V2LOSAlarm | read-only | mandatory | Loss Of Signal Alarm |
| 1.3.6.1.4.1.251.1.1.13.11.1.10 | Columnds3V2Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.12 | Tablee3Table | not-accessible | mandatory | E3-2C Config/Status Table |
| 1.3.6.1.4.1.251.1.1.13.12.1 | Rowe3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.12.1.1 | Columne3LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.12.1.2 | Columne3LimType | read-only | mandatory | LIM I.D. type |
| 1.3.6.1.4.1.251.1.1.13.12.1.3 | Columne3LimOK | read-only | mandatory | LIM OK. |
| 1.3.6.1.4.1.251.1.1.13.12.1.4 | Columne3EQSelect | read-write | mandatory | Rx Line Equalization select. |
| 1.3.6.1.4.1.251.1.1.13.12.1.6 | Columne3Loopback | read-write | mandatory | Loopback LIU. |
| 1.3.6.1.4.1.251.1.1.13.12.1.7 | Columne3TxAIS | read-write | mandatory | Transmit AIS. |
| 1.3.6.1.4.1.251.1.1.13.12.1.8 | Columne3TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.12.1.9 | Columne3LOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.12.1.10 | Columne3LOSAlarm | read-only | mandatory | Loss Of Signal Alarm |
| 1.3.6.1.4.1.251.1.1.13.12.1.11 | Columne3Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.13 | TablehssiTable | not-accessible | mandatory | hssi Status Table |
| 1.3.6.1.4.1.251.1.1.13.13.1 | RowhssiEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.13.1.1 | ColumnhssiLinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.13.1.2 | ColumnhssiLocalLoopback | read-write | mandatory | Local Loopback. |
| 1.3.6.1.4.1.251.1.1.13.13.1.3 | ColumnhssiRemoteLoopback | read-write | mandatory | Remote Loopback. |
| 1.3.6.1.4.1.251.1.1.13.13.1.4 | ColumnhssiReconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.13.1.15 | ColumnhssiType | read-write | mandatory | Type of link. |
| 1.3.6.1.4.1.251.1.1.13.13.1.16 | ColumnhssiLimType | read-only | mandatory | LIM Version |
| 1.3.6.1.4.1.251.1.1.13.13.1.17 | ColumnhssiClockSrc | read-write | mandatory | Source of clock. Note that for a DCE, from-DCE(4) should not be selected. |
| 1.3.6.1.4.1.251.1.1.13.13.1.18 | ColumnhssiCtrTestMode | read-only | mandatory | Test Mode. |
| 1.3.6.1.4.1.251.1.1.13.13.1.19 | ColumnhssiLinkReady | read-only | mandatory | Set to yes(1) if link is ready. |
| 1.3.6.1.4.1.251.1.1.13.13.1.20 | ColumnhssiRemoteReady | read-only | mandatory | Set to yes(1) if remote link is ready. |
| 1.3.6.1.4.1.251.1.1.13.13.1.25 | ColumnhssiLOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.13.1.30 | ColumnhssiLOSAlarm | read-only | mandatory | Loss Of Signal Alarm |
| 1.3.6.1.4.1.251.1.1.13.14 | Tablej2Table | not-accessible | mandatory | J2 Config/Status Table |
| 1.3.6.1.4.1.251.1.1.13.14.1 | Rowj2Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.14.1.1 | Columnj2LinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.14.1.3 | Columnj2FirmwareRev | read-only | mandatory | Firmware Revision |
| 1.3.6.1.4.1.251.1.1.13.14.1.4 | Columnj2TxEq | read-write | mandatory | Select equalizer setting |
| 1.3.6.1.4.1.251.1.1.13.14.1.6 | Columnj2Lb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.13.14.1.7 | Columnj2TxAIS | read-write | mandatory | Transmit the AIS State. |
| 1.3.6.1.4.1.251.1.1.13.14.1.9 | Columnj2TxClkSel | read-write | mandatory | Transmit clock select. |
| 1.3.6.1.4.1.251.1.1.13.14.1.10 | Columnj2ClrStats | read-write | mandatory | Clear Counters |
| 1.3.6.1.4.1.251.1.1.13.14.1.11 | Columnj2Reconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.14.1.12 | Columnj2TS97TS98 | read-write | mandatory | Set the value (in hex) of the bytes to be transmitted in time slots 97 and 98 of the J2 frame. |
| 1.3.6.1.4.1.251.1.1.13.14.1.20 | Columnj2QualClock | read-only | mandatory | Quality of Clock Selection |
| 1.3.6.1.4.1.251.1.1.13.14.1.22 | Columnj2LOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.14.1.23 | Columnj2OOFDefect | read-only | mandatory | Receive Out Of Frame |
| 1.3.6.1.4.1.251.1.1.13.14.1.24 | Columnj2AISDefect | read-only | mandatory | Receive AIS Defect |
| 1.3.6.1.4.1.251.1.1.13.14.1.26 | Columnj2RAlmDefect | read-only | mandatory | Remote Alarm Defect |
| 1.3.6.1.4.1.251.1.1.13.14.1.37 | Columnj2LOSAlarm | read-only | mandatory | Loss Of Signal Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.14.1.38 | Columnj2LOFAlarm | read-only | mandatory | Loss Of Frame Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.14.1.39 | Columnj2AISAlarm | read-only | mandatory | AIS Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.13.14.1.41 | Columnj2RAlmAlarm | read-only | mandatory | Remote Alarm Condition |
| 1.3.6.1.4.1.251.1.1.13.14.1.52 | Columnj2FerCount | read-only | mandatory | The framing bit error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.14.1.53 | Columnj2RAlmCount | read-only | mandatory | The Remote Alarm error count for this link. |
| 1.3.6.1.4.1.251.1.1.13.14.1.55 | Columnj2LcvCount | read-only | mandatory | The J2 Line code violations count for this link. |
| 1.3.6.1.4.1.251.1.1.13.14.1.56 | Columnj2CrcCount | read-only | mandatory | Number of J2 muliframes received with CRC errors |
| 1.3.6.1.4.1.251.1.1.13.14.1.66 | Columnj2LineES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.14.1.67 | Columnj2LineSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.14.1.68 | Columnj2ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.14.1.69 | Columnj2SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.13.14.1.70 | Columnj2AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.13.14.1.71 | Columnj2UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.13.15 | TablescfTable | not-accessible | mandatory | SCF Config/Status Table |
| 1.3.6.1.4.1.251.1.1.13.15.1 | RowscfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.13.15.1.1 | ColumnscfLinkNo | read-only | mandatory | Link number - this is the instance. |
| 1.3.6.1.4.1.251.1.1.13.15.1.2 | ColumnscfLimType | read-only | mandatory | LIM I.D. type |
| 1.3.6.1.4.1.251.1.1.13.15.1.3 | ColumnscfFirmwareRev | read-only | mandatory | Firmware Revision |
| 1.3.6.1.4.1.251.1.1.13.15.1.4 | ColumnscfQualClock | read-only | mandatory | Quality of Clock Selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.5 | ColumnscfContr | read-write | mandatory | Controller Selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.6 | ColumnscfDCEDTE | read-write | mandatory | DCE or DTE Selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.7 | ColumnscfLb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.8 | ColumnscfLineTiming | read-write | mandatory | Receive Line Timing Selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.9 | ColumnscfDataRate | read-write | mandatory | Data Rate Selection in K Bit/Sec |
| 1.3.6.1.4.1.251.1.1.13.15.1.10 | ColumnscfClkSel | read-write | mandatory | Clock select |
| 1.3.6.1.4.1.251.1.1.13.15.1.11 | ColumnscfInterfaceType | read-write | mandatory | Interface type selection |
| 1.3.6.1.4.1.251.1.1.13.15.1.12 | ColumnscfReconfig | read-write | mandatory | Reconfigure Link |
| 1.3.6.1.4.1.251.1.1.13.15.1.13 | ColumnscfLOSDefect | read-only | mandatory | Loss Of Signal Defect |
| 1.3.6.1.4.1.251.1.1.13.15.1.14 | ColumnscfLOSAlarm | read-only | mandatory | Loss Of Signal Integrated Alarm |
| 1.3.6.1.4.1.251.1.1.14 | Nodedv2Billing | |||
| 1.3.6.1.4.1.251.1.1.14.1 | ScalarbillAvailable | read-only | mandatory | Number of billing records available. |
| 1.3.6.1.4.1.251.1.1.14.3 | TablebillingTable | not-accessible | mandatory | This table is used to contain billing records. |
| 1.3.6.1.4.1.251.1.1.14.3.1 | RowbillingEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.14.3.1.1 | ColumnbillSeq | read-only | mandatory | billing record sequence number. |
| 1.3.6.1.4.1.251.1.1.14.3.1.2 | ColumnbillSvpi | read-only | mandatory | Source Virtual Path Identifier for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.3 | ColumnbillSvci | read-only | mandatory | Source Virtual Circuit Identifier for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.4 | ColumnbillDvpi | read-only | mandatory | Destination Virtual Path Identifier for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.5 | ColumnbillDvci | read-only | mandatory | Destination Virtual Circuit Identifier for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.6 | ColumnbillSslot | read-only | mandatory | Source slot for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.7 | ColumnbillSlink | read-only | mandatory | Source link for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.8 | ColumnbillDslot | read-only | mandatory | Destination slot for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.9 | ColumnbillDlink | read-only | mandatory | Destination link for VC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.10 | ColumnbillCalled | read-only | mandatory | Called or Destination E.164 address. |
| 1.3.6.1.4.1.251.1.1.14.3.1.11 | ColumnbillCalledSub | read-only | mandatory | Called or Destination E.164 sub-address. |
| 1.3.6.1.4.1.251.1.1.14.3.1.12 | ColumnbillCalling | read-only | mandatory | Calling or Originating E.164 address. |
| 1.3.6.1.4.1.251.1.1.14.3.1.13 | ColumnbillCallingSub | read-only | mandatory | Calling or Originating E.164 sub-address. |
| 1.3.6.1.4.1.251.1.1.14.3.1.14 | ColumnbillCellInC | read-only | mandatory | Cell in overflows count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.15 | ColumnbillCellIn | read-only | mandatory | Cell in count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.16 | ColumnbillFrameIn | read-only | mandatory | Frame in count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.17 | ColumnbillByteInC | read-only | mandatory | Byte in overflows count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.18 | ColumnbillByteIn | read-only | mandatory | Byte in count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.19 | ColumnbillCellOutC | read-only | mandatory | Cell out overflows count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.20 | ColumnbillCellOut | read-only | mandatory | Cell out count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.21 | ColumnbillFrameOut | read-only | mandatory | Frame out count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.22 | ColumnbillByteOutC | read-only | mandatory | Byte out overflows count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.23 | ColumnbillByteOut | read-only | mandatory | Byte out count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.25 | ColumnbillCause | read-only | mandatory | Clear cause code. |
| 1.3.6.1.4.1.251.1.1.14.3.1.28 | ColumnbillValid | read-write | mandatory | Deletes billing record Entry by setting to invalid(2). |
| 1.3.6.1.4.1.251.1.1.14.3.1.29 | ColumnbillCLP1OutC | read-only | mandatory | CLP1 out overflows count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.30 | ColumnbillCLP1Out | read-only | mandatory | CLP1 out count. |
| 1.3.6.1.4.1.251.1.1.14.3.1.31 | ColumnbillTag | read-only | mandatory | This identifies the billable SVC. |
| 1.3.6.1.4.1.251.1.1.14.3.1.32 | ColumnbillStartM2 | read-only | mandatory | Call start date-time. |
| 1.3.6.1.4.1.251.1.1.14.3.1.33 | ColumnbillEndM2 | read-only | mandatory | Call end date-time. |
| 1.3.6.1.4.1.251.1.1.14.3.1.34 | ColumnbillFwdPCR | read-only | mandatory | SVC Forward Peak Cell Rate. |
| 1.3.6.1.4.1.251.1.1.14.3.1.35 | ColumnbillBwdPCR | read-only | mandatory | SVC Backward Peak Cell Rate. |
| 1.3.6.1.4.1.251.1.1.14.3.1.36 | ColumnbillFwdSCR | read-only | mandatory | SVC Forward Sustained Cell Rate. |
| 1.3.6.1.4.1.251.1.1.14.3.1.37 | ColumnbillBwdSCR | read-only | mandatory | SVC Backward Sustained Cell Rate. |
| 1.3.6.1.4.1.251.1.1.14.3.1.38 | ColumnbillFwdMBS | read-only | mandatory | SVC Forward Maximum Burst Size. |
| 1.3.6.1.4.1.251.1.1.14.3.1.39 | ColumnbillBwdMBS | read-only | mandatory | SVC Backward Maximum Burst Size. |
| 1.3.6.1.4.1.251.1.1.14.3.1.40 | ColumnbillFwdQOS | read-only | mandatory | Forward Quality of Service. |
| 1.3.6.1.4.1.251.1.1.14.3.1.41 | ColumnbillBwdQOS | read-only | mandatory | Backward Quality of Service. |
| 1.3.6.1.4.1.251.1.1.14.4 | ScalarbillingControl | read-write | mandatory | This object is set to start SPVC/PVC process. |
| 1.3.6.1.4.1.251.1.1.14.7 | ScalarbillLost | read-write | mandatory | Lost of billing record count. |
| 1.3.6.1.4.1.251.1.1.14.8 | ScalarbillLinks | read-write | mandatory | This value is bitwise billing link control. |
| 1.3.6.1.4.1.251.1.1.14.9 | ScalarbillTrapControl | read-write | mandatory | This object is set to enable or disable billing traps |
| 1.3.6.1.4.1.251.1.1.14.10 | ScalarbillDirControl | read-write | mandatory | This object is selected for uni-direction billing or bi-direction billing. |
| 1.3.6.1.4.1.251.1.1.14.12 | ScalarbillingInterval | read-write | mandatory | This parameter is used to set the billing period in 15/30/60/120 minute intervals |
| 1.3.6.1.4.1.251.1.1.15 | Nodedv2QeDoc | |||
| 1.3.6.1.4.1.251.1.1.15.1 | ScalarqeDocMacAddress | read-only | mandatory | MAC address of Ethernet ports. |
| 1.3.6.1.4.1.251.1.1.15.2 | ScalarqeDocTunRetryPeriod | read-write | mandatory | Number of seconds between retries of tunnel establishment. |
| 1.3.6.1.4.1.251.1.1.15.3 | ScalarqeDocTunIdlePeriod | read-write | mandatory | Number of seconds to wait without activity before clearing tunnel call. |
| 1.3.6.1.4.1.251.1.1.15.4 | TableqeDocBridgeTable | not-accessible | mandatory | This table is used to statistics and control for the bridges. |
| 1.3.6.1.4.1.251.1.1.15.4.1 | RowqeDocBridgeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.15.4.1.1 | ColumnqeDocBridgeLinkNo | read-only | mandatory | Link number. |
| 1.3.6.1.4.1.251.1.1.15.4.1.2 | ColumnqeDocBridgeEnable | read-write | mandatory | Set to yes(1) to enable MAC bridging. |
| 1.3.6.1.4.1.251.1.1.15.4.1.3 | ColumnqeDocBridgeLink0Eligible | read-write | mandatory | Link 0 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.4.1.4 | ColumnqeDocBridgeLink1Eligible | read-write | mandatory | Link 1 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.4.1.5 | ColumnqeDocBridgeLink2Eligible | read-write | mandatory | Link 2 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.4.1.6 | ColumnqeDocBridgeLink3Eligible | read-write | mandatory | Link 3 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.6 | TableqeDocTunTable | not-accessible | mandatory | This table is used to establish and control tunnels set-up using SVCs. |
| 1.3.6.1.4.1.251.1.1.15.6.1 | RowqeDocTunEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.15.6.1.1 | ColumnqeDocTunIndex | read-write | mandatory | The tunnel index number. |
| 1.3.6.1.4.1.251.1.1.15.6.1.2 | ColumnqeDocTunName | read-write | mandatory | Mnemonic name for tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.3 | ColumnqeDocTunType | read-write | mandatory | Specifies the type of tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.4 | ColumnqeDocTunState | read-write | mandatory | Set to Use pvc(2) if using with a PVC. Set to Use svc(3) if using with a SVC. Set to idle(1) to prevent tunnel being established. |
| 1.3.6.1.4.1.251.1.1.15.6.1.5 | ColumnqeDocTunCallState | read-only | mandatory | State of tunnel call. |
| 1.3.6.1.4.1.251.1.1.15.6.1.6 | ColumnqeDocTunInFrames | read-only | mandatory | Received frames count. |
| 1.3.6.1.4.1.251.1.1.15.6.1.7 | ColumnqeDocTunOutFrames | read-only | mandatory | Transmitted frames count. |
| 1.3.6.1.4.1.251.1.1.15.6.1.8 | ColumnqeDocTunVPI | read-only | mandatory | VPI being used for the tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.9 | ColumnqeDocTunVCI | read-only | mandatory | VCI being used for the tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.10 | ColumnqeDocTunPriority | read-only | mandatory | Cell priority bit value. |
| 1.3.6.1.4.1.251.1.1.15.6.1.11 | ColumnqeDocTunSlot | read-only | mandatory | Target slot for tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.12 | ColumnqeDocTunLink | read-only | mandatory | Target link for tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.13 | ColumnqeDocTunRemNet | read-write | mandatory | Remote network address for tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.14 | ColumnqeDocTunRemMask | read-write | mandatory | Mask for remote network. |
| 1.3.6.1.4.1.251.1.1.15.6.1.15 | ColumnqeDocTunLocNet | read-write | mandatory | Local network address for tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.16 | ColumnqeDocTunLocMask | read-write | mandatory | Mask for local network. |
| 1.3.6.1.4.1.251.1.1.15.6.1.17 | ColumnqeDocTunRemStartSkt | read-write | mandatory | Specifies start of socket range from remote that is allowed/barred from access to tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.18 | ColumnqeDocTunRemEndSkt | read-write | mandatory | Specifies end of socket range from remote that is allowed/barred from access to tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.19 | ColumnqeDocTunLocStartSkt | read-write | mandatory | Specifies start of socket range from local that is allowed/barred from access to tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.20 | ColumnqeDocTunLocEndSkt | read-write | mandatory | Specifies end of socket range from local that is allowed/barred from access to tunnel. |
| 1.3.6.1.4.1.251.1.1.15.6.1.21 | ColumnqeDocTunSktType | read-write | mandatory | Specifies the protocol type and whether to include or exclude frames with socket number in the specified range. |
| 1.3.6.1.4.1.251.1.1.15.6.1.22 | ColumnqeDocTunDestAddress | read-write | mandatory | Destination address for tunnel. This is only required for SVC tunnels. |
| 1.3.6.1.4.1.251.1.1.15.6.1.23 | ColumnqeDocTunDestSubAddress | read-write | mandatory | Destination sub-address for tunnel. This is only required for SVC tunnels. |
| 1.3.6.1.4.1.251.1.1.15.6.1.24 | ColumnqeDocTunLink0Eligible | read-write | mandatory | Link 0 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.6.1.25 | ColumnqeDocTunLink1Eligible | read-write | mandatory | Link 1 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.6.1.26 | ColumnqeDocTunLink2Eligible | read-write | mandatory | Link 2 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.6.1.27 | ColumnqeDocTunLink3Eligible | read-write | mandatory | Link 3 eligible for frames |
| 1.3.6.1.4.1.251.1.1.15.6.1.28 | ColumnqeDocTunValidity | read-write | mandatory | Setting to invalid(2) removes the row from the table. |
| 1.3.6.1.4.1.251.1.1.15.6.1.29 | ColumnqeDocTunRfc1483Encap | read-write | mandatory | Setting to yes(1) enable RFC 1483 LLC encapsulation. |
| 1.3.6.1.4.1.251.1.1.15.6.1.31 | ColumnqeDocTunClp | read-only | mandatory | Cell loss priority bit value. |
| 1.3.6.1.4.1.251.1.1.15.7 | ScalarqeDocIpAddress | read-write | mandatory | The IP address of the QEDOC for management use. |
| 1.3.6.1.4.1.251.1.1.15.8 | ScalarqeDocIpMask | read-write | mandatory | The mask for management use. |
| 1.3.6.1.4.1.251.1.1.15.9 | ScalarqeDocIpBCast | read-write | mandatory | The management broadcast address. |
| 1.3.6.1.4.1.251.1.1.16 | Nodedv2SDH | |||
| 1.3.6.1.4.1.251.1.1.16.1 | TablesdhCTable | not-accessible | mandatory | This table is used to control sdh/Sonet configuration. |
| 1.3.6.1.4.1.251.1.1.16.1.1 | RowsdhCEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.16.1.1.1 | ColumnsdhCLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.16.1.1.2 | ColumnsdhCLinkEnab | read-write | mandatory | Set to yes(1) to enable the link. |
| 1.3.6.1.4.1.251.1.1.16.1.1.3 | ColumnsdhCLoopTimer | read-write | mandatory | Set to yes(1) to enable loop timing for this link. |
| 1.3.6.1.4.1.251.1.1.16.1.1.4 | ColumnsdhCLoopDiag | read-write | mandatory | Set to yes(1) to enable diagnostic loopback. |
| 1.3.6.1.4.1.251.1.1.16.1.1.5 | ColumnsdhCLoopLine | read-write | mandatory | Set to yes(1) to enable line loopback. |
| 1.3.6.1.4.1.251.1.1.16.1.1.6 | ColumnsdhCScrambler | read-write | mandatory | Set to no(2) to disable scramble mode for this link. |
| 1.3.6.1.4.1.251.1.1.16.1.1.7 | ColumnsdhC0x55 | read-write | mandatory | If set to no(2) then HCS is XORed with 0x55 |
| 1.3.6.1.4.1.251.1.1.16.1.1.8 | ColumnsdhSonetSdh | read-write | mandatory | If set to sdh(2) then sdh header is used |
| 1.3.6.1.4.1.251.1.1.16.1.1.9 | ColumnsdhClearCounts | read-write | mandatory | Clear Error Counts and Performance Parameters |
| 1.3.6.1.4.1.251.1.1.16.1.1.10 | ColumnsdhReconfig | read-write | mandatory | Perform Reconfiguration for Link |
| 1.3.6.1.4.1.251.1.1.16.1.1.11 | ColumnsdhCLpbkTimeout | read-write | mandatory | This parameter is used to set the loopback timeout in minutes. |
| 1.3.6.1.4.1.251.1.1.16.1.1.12 | ColumnsdhStmSts | read-write | mandatory | Set to 155.52(1) for STS-3c/STM-1 format |
| 1.3.6.1.4.1.251.1.1.16.1.1.13 | ColumnsdhAPSOnOff | read-write | mandatory | If set to on(2) then sdh APS is used |
| 1.3.6.1.4.1.251.1.1.16.1.1.14 | ColumnsdhCIdleCell | read-write | mandatory | Idle Cell Header Contents |
| 1.3.6.1.4.1.251.1.1.16.3 | TablesdhSTable | not-accessible | mandatory | The status table for sdh/SONET. |
| 1.3.6.1.4.1.251.1.1.16.3.1 | RowsdhSEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.16.3.1.1 | ColumnsdhSLinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.16.3.1.2 | ColumnsdhSTXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.16.3.1.3 | ColumnsdhSRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.16.3.1.4 | ColumnsdhSSectLOS | read-only | mandatory | The loss of signal indicator. |
| 1.3.6.1.4.1.251.1.1.16.3.1.5 | ColumnsdhSSectOOF | read-only | mandatory | The out of frame indicator. |
| 1.3.6.1.4.1.251.1.1.16.3.1.6 | ColumnsdhSSectLOF | read-only | mandatory | The loss of frame indicator. |
| 1.3.6.1.4.1.251.1.1.16.3.1.7 | ColumnsdhSLineAIS | read-only | mandatory | Set to yes(1) if Line AIS detected. |
| 1.3.6.1.4.1.251.1.1.16.3.1.8 | ColumnsdhSLineFERF | read-only | mandatory | Set to yes(1) if Line FERF detected. |
| 1.3.6.1.4.1.251.1.1.16.3.1.9 | ColumnsdhSPathAIS | read-only | mandatory | Set to yes(1) if Alarm Indication Signal detected. |
| 1.3.6.1.4.1.251.1.1.16.3.1.10 | ColumnsdhSPathYellow | read-only | mandatory | Set to yes(1) if yellow alarm active. |
| 1.3.6.1.4.1.251.1.1.16.3.1.11 | ColumnsdhSPathFERF | read-only | mandatory | Set to yes(1) if Far End Receive Failure detected. |
| 1.3.6.1.4.1.251.1.1.16.3.1.12 | ColumnsdhSPathLOP | read-only | mandatory | Set to yes(1) if Loss Of Pointer detected. |
| 1.3.6.1.4.1.251.1.1.16.3.1.13 | ColumnsdhSPathLabelMM | read-only | mandatory | Set to yes(1) if a Path Label Mismatch is detected |
| 1.3.6.1.4.1.251.1.1.16.3.1.14 | ColumnsdhSExBERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.16.3.1.15 | ColumnsdhSPathLabel | read-only | mandatory | The Path Label. |
| 1.3.6.1.4.1.251.1.1.16.3.1.16 | ColumnsdhSCellDelState | read-only | mandatory | The Cell Delineation State |
| 1.3.6.1.4.1.251.1.1.16.3.1.17 | ColumnsdhSAlarmLOS | read-only | mandatory | Set to yes(1) if a LOS failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.18 | ColumnsdhSAlarmLOF | read-only | mandatory | Set to yes(1) if a LOF failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.19 | ColumnsdhSAlarmLineAIS | read-only | mandatory | Set to yes(1) if a Line AIS failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.20 | ColumnsdhSAlarmLineRFI | read-only | mandatory | Set to yes(1) if a Line Remote Failure Indication (Yellow Alarm) failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.21 | ColumnsdhSAlarmPathAIS | read-only | mandatory | Set to yes(1) if a Path AIS failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.22 | ColumnsdhSAlarmPathRFI | read-only | mandatory | Set to yes(1) if a Path Remote Failure Indication (Yellow Alarm) failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.23 | ColumnsdhSAlarmLOP | read-only | mandatory | Set to yes(1) if a LOP failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.24 | ColumnsdhSAlarmPLM | read-only | mandatory | Set to yes(1) if a Payload Mismatch failure is declared |
| 1.3.6.1.4.1.251.1.1.16.3.1.25 | ColumnsdhSExBERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.16.3.1.26 | ColumnsdhSCorrHCS | read-only | mandatory | The correctable HCS errors count. |
| 1.3.6.1.4.1.251.1.1.16.3.1.27 | ColumnsdhSUnCorrHCS | read-only | mandatory | The uncorrectable HCS errors count. |
| 1.3.6.1.4.1.251.1.1.16.4 | TablesdhS2Table | not-accessible | mandatory | The second status table for sdh/SONET. |
| 1.3.6.1.4.1.251.1.1.16.4.1 | RowsdhS2Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.16.4.1.1 | ColumnsdhS2LinkNo | read-only | mandatory | The link number for this status. |
| 1.3.6.1.4.1.251.1.1.16.4.1.2 | ColumnsdhSSectBIP8 | read-only | mandatory | Section BIP-8 error count. |
| 1.3.6.1.4.1.251.1.1.16.4.1.3 | ColumnsdhSSectES | read-only | mandatory | Section Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.4 | ColumnsdhSSectSES | read-only | mandatory | Section Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.5 | ColumnsdhSLineBIP24 | read-only | mandatory | Line BIP-24 error count. |
| 1.3.6.1.4.1.251.1.1.16.4.1.6 | ColumnsdhSLineES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.7 | ColumnsdhSLineSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.8 | ColumnsdhSLineUAS | read-only | mandatory | Line Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.9 | ColumnsdhSLineFC | read-only | mandatory | Line Failure Count |
| 1.3.6.1.4.1.251.1.1.16.4.1.10 | ColumnsdhSPathBIP8 | read-only | mandatory | The path BIP-8 count. |
| 1.3.6.1.4.1.251.1.1.16.4.1.11 | ColumnsdhSPathES | read-only | mandatory | Path Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.12 | ColumnsdhSPathSES | read-only | mandatory | Path Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.13 | ColumnsdhSPathUAS | read-only | mandatory | Path Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.14 | ColumnsdhSPathFC | read-only | mandatory | Path Failure Count |
| 1.3.6.1.4.1.251.1.1.16.4.1.15 | ColumnsdhSLineFEBE | read-only | mandatory | Far end block errors. |
| 1.3.6.1.4.1.251.1.1.16.4.1.16 | ColumnsdhSLineFarEndES | read-only | mandatory | Far End Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.17 | ColumnsdhSLineFarEndSES | read-only | mandatory | Far End Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.18 | ColumnsdhSLineFarEndUAS | read-only | mandatory | Far End Line Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.19 | ColumnsdhSLineFarEndFC | read-only | mandatory | Far End Line Failure Count |
| 1.3.6.1.4.1.251.1.1.16.4.1.20 | ColumnsdhSPathFEBE | read-only | mandatory | The Path Far End Block Error count. |
| 1.3.6.1.4.1.251.1.1.16.4.1.21 | ColumnsdhSPathFarEndES | read-only | mandatory | Far End Path Errored Second |
| 1.3.6.1.4.1.251.1.1.16.4.1.22 | ColumnsdhSPathFarEndSES | read-only | mandatory | Far End Path Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.23 | ColumnsdhSPathFarEndUAS | read-only | mandatory | Far End Path Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.16.4.1.24 | ColumnsdhSPathFarEndFC | read-only | mandatory | Far End Path Failure Count |
| 1.3.6.1.4.1.251.1.1.17 | Nodedv2Pvc | |||
| 1.3.6.1.4.1.251.1.1.17.1 | TablepvcResourceTable | not-accessible | mandatory | This table contains information about the resource available for pvcs on each link. |
| 1.3.6.1.4.1.251.1.1.17.1.1 | RowpvcResourceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.17.1.1.1 | ColumnpvcSlot | read-only | mandatory | The slot number. |
| 1.3.6.1.4.1.251.1.1.17.1.1.2 | ColumnpvcLink | read-only | mandatory | The link number being used for the call. |
| 1.3.6.1.4.1.251.1.1.17.1.1.3 | ColumnpvcVciStart | read-write | mandatory | Identifies the start of the range of PVC VCI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.4 | ColumnpvcVciEnd | read-write | mandatory | Identifies the end of the range of PVC VCI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.5 | ColumnpvcVpiStart | read-write | mandatory | Identifies the start of the range of PVC VPI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.6 | ColumnpvcVpiEnd | read-write | mandatory | Identifies the end of the range of PVC VPI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.7 | ColumnpvcVpStart | read-write | mandatory | Identifies the start of the range of VPs supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.8 | ColumnpvcVpEnd | read-write | mandatory | Identifies the end of the range of VPs supported on this link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.11 | ColumnpvcBackwardCellRateTotal | read-write | mandatory | The backward total cell rate configured for PVCs on this link. Note that this object is in cells per second (CPS). |
| 1.3.6.1.4.1.251.1.1.17.1.1.13 | ColumnpvcLinkQoS | read-write | mandatory | This specifies the type of ATM link. |
| 1.3.6.1.4.1.251.1.1.17.1.1.14 | ColumnpvcMolnVpi | read-write | mandatory | This is the VPI for the management overlay network. |
| 1.3.6.1.4.1.251.1.1.17.1.1.15 | ColumnpvcMolnVci | read-write | mandatory | This is the VCI for the management overlay network. |
| 1.3.6.1.4.1.251.1.1.17.1.1.16 | ColumnpvcLowPriOverbookFactor | read-write | mandatory | This is the percentage of low priority traffic overbook factor. |
| 1.3.6.1.4.1.251.1.1.17.2 | TablepvcTable | not-accessible | mandatory | This table contains information on each PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1 | RowpvcEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.17.2.1.1 | ColumnpvcDSlot | read-write | mandatory | The destination slot for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.2 | ColumnpvcDLink | read-write | mandatory | The destination link for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.3 | ColumnpvcDvci | read-write | mandatory | The destination virtual circuit identifier for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.4 | ColumnpvcDvpi | read-write | mandatory | The destination virtual path identifier for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.5 | ColumnpvcSSlot | read-write | mandatory | The source slot for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.6 | ColumnpvcSLink | read-write | mandatory | The source link for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.7 | ColumnpvcSvci | read-write | mandatory | The source virtual circuit identifier for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.8 | ColumnpvcSvpi | read-write | mandatory | The source virtual path identifier for the PVC. |
| 1.3.6.1.4.1.251.1.1.17.2.1.9 | ColumnpvcForwardPeakCellRate | read-write | mandatory | Forward Peak Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.10 | ColumnpvcForwardPeakSize | read-write | mandatory | Forward Peak Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.11 | ColumnpvcForwardPeakMode | read-write | mandatory | Forward Peak Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.12 | ColumnpvcBackwardPeakCellRate | read-write | mandatory | Backward Peak Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.13 | ColumnpvcBackwardPeakSize | read-write | mandatory | Backward Peak Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.14 | ColumnpvcBackwardPeakMode | read-write | mandatory | Backward Peak Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.15 | ColumnpvcForwardSustainedCellRate | read-write | mandatory | Forward Sustained Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.16 | ColumnpvcForwardSustainedSize | read-write | mandatory | Forward Sustained Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.17 | ColumnpvcForwardSustainedMode | read-write | mandatory | Forward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.18 | ColumnpvcBackwardSustainedCellRate | read-write | mandatory | Backward Sustained Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.19 | ColumnpvcBackwardSustainedSize | read-write | mandatory | Backward Sustained Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.20 | ColumnpvcBackwardSustainedMode | read-write | mandatory | Backward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.21 | ColumnpvcAuxForwardPeakCellRate | read-write | mandatory | Auxiliary Forward Peak Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.22 | ColumnpvcAuxForwardPeakSize | read-write | mandatory | Auxiliary Forward Peak Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.23 | ColumnpvcAuxForwardPeakMode | read-write | mandatory | Auxiliary Forward Peak Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.24 | ColumnpvcAuxBackwardPeakCellRate | read-write | mandatory | Auxiliary Backward Peak Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.25 | ColumnpvcAuxBackwardPeakSize | read-write | mandatory | Auxiliary Backward Peak Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.26 | ColumnpvcAuxBackwardPeakMode | read-write | mandatory | Auxiliary Backward Peak Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.27 | ColumnpvcAuxForwardSustainedCellRate | read-write | mandatory | Auxiliary Forward Sustained Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.28 | ColumnpvcAuxForwardSustainedSize | read-write | mandatory | Auxiliary Forward Sustained Bucket Size (Cells) |
| 1.3.6.1.4.1.251.1.1.17.2.1.29 | ColumnpvcAuxForwardSustainedMode | read-write | mandatory | Auxiliary Forward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.30 | ColumnpvcAuxBackwardSustainedCellRate | read-write | mandatory | Auxiliary Backward Sustained Cell Rate (CPS) |
| 1.3.6.1.4.1.251.1.1.17.2.1.31 | ColumnpvcAuxBackwardSustainedSize | read-write | mandatory | Auxiliary Backward Sustained Bucket Size |
| 1.3.6.1.4.1.251.1.1.17.2.1.32 | ColumnpvcAuxBackwardSustainedMode | read-write | mandatory | Auxiliary Backward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.17.2.1.33 | ColumnpvcQoSClass | read-write | mandatory | CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service … |
| 1.3.6.1.4.1.251.1.1.17.2.1.34 | ColumnpvcStatus | read-write | mandatory | If this object is set to invalid(2), the PVC entry is removed. Set to start-PVC(3) to activate the PVC. When the state changes to running(5) then the PVC is su… |
| 1.3.6.1.4.1.251.1.1.17.2.1.35 | ColumnpvcMulticast | read-write | mandatory | If this object is set to no, multicast is not allowed; otherwise, multicast is allowed. |
| 1.3.6.1.4.1.251.1.1.17.2.1.36 | ColumnpvcInternalVpi | read-only | mandatory | This object indicates the internal VPI value that the source side of multicast tree ranslates its orignal VPI to. |
| 1.3.6.1.4.1.251.1.1.17.2.1.37 | ColumnpvcInternalVci | read-only | mandatory | This object indicates the internal VCI value that the source side of multicast tree ranslates its orignal VCI to. |
| 1.3.6.1.4.1.251.1.1.17.2.1.38 | ColumnpvcNumLeaves | read-only | mandatory | This object indicates the number of leaves this multicast tree currently contains. |
| 1.3.6.1.4.1.251.1.1.17.2.1.39 | ColumnpvcDirection | read-write | mandatory | This object determines if a multicast PVC is to be unidirectional or bidirectional |
| 1.3.6.1.4.1.251.1.1.18 | Nodedv2Svc | |||
| 1.3.6.1.4.1.251.1.1.18.1 | ScalarsvcMaxPtPtConnections | read-write | mandatory | The maximum number of point-to-point connections. |
| 1.3.6.1.4.1.251.1.1.18.2 | ScalarsvcMaxPtMptConnections | read-write | mandatory | The maximum number of point-to-multipoint connections. |
| 1.3.6.1.4.1.251.1.1.18.3 | ScalarsvcMaxPtMptParties | read-write | mandatory | The maximum number of parties in a point-to-multipoint connection. |
| 1.3.6.1.4.1.251.1.1.18.6 | TablesvcResourceTable | not-accessible | mandatory | This table contains information about the resource available for svcs on each link. |
| 1.3.6.1.4.1.251.1.1.18.6.1 | RowsvcResourceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.6.1.1 | ColumnsvcSAP | read-only | mandatory | Identifies the SAP. |
| 1.3.6.1.4.1.251.1.1.18.6.1.2 | ColumnsvcHiLo | read-write | mandatory | Select VPI/VCI values from low to high or high to low |
| 1.3.6.1.4.1.251.1.1.18.6.1.3 | ColumnsvcVciStart | read-only | mandatory | Identifies the start of the range of SVC VCI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.4 | ColumnsvcVciEnd | read-only | mandatory | Identifies the end of the range of SVC VCI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.5 | ColumnsvcVpiStart | read-write | mandatory | Identifies the start of the range of SVC VPI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.6 | ColumnsvcVpiEnd | read-write | mandatory | Identifies the end of the range of SVC VPI values supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.7 | ColumnsvcVpStart | read-write | mandatory | Identifies the start of the range of SVPs supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.8 | ColumnsvcVpEnd | read-write | mandatory | Identifies the end of the range of SVPs supported on this link. |
| 1.3.6.1.4.1.251.1.1.18.6.1.11 | ColumnsvcBackwardCellRateTotal | read-write | mandatory | The backward total cell rate configured for SVCs on this link. Note that this object is in cells per second (CPS). |
| 1.3.6.1.4.1.251.1.1.18.6.1.12 | ColumnsvcBackwardCellRateAvailable | read-only | mandatory | The backward cell rate available for SVCs on this link. Note that this object is in cells per second (CPS). |
| 1.3.6.1.4.1.251.1.1.18.6.1.13 | ColumnsvcSigVci | read-write | mandatory | The VCI used for signalling. |
| 1.3.6.1.4.1.251.1.1.18.6.1.14 | ColumnsvcSigVpi | read-write | mandatory | The VPI used for signalling. |
| 1.3.6.1.4.1.251.1.1.18.6.1.15 | ColumnsvcSAPStatus | read-write | mandatory | Select on(4) to activate the SAP, off(1) to deactivate, reconfigure(2) to hot reconfigure the vci/vpi ranges and reset(3) to clear all calls on the SAP. |
| 1.3.6.1.4.1.251.1.1.18.6.1.16 | ColumnsvcCDVTSize | read-write | mandatory | Cell Delay Variation Tolerance size. |
| 1.3.6.1.4.1.251.1.1.18.6.1.17 | ColumnsvcIntType | read-write | mandatory | Interface type - NETWORK or USER. |
| 1.3.6.1.4.1.251.1.1.18.6.1.18 | ColumnsvcPolicing | read-write | mandatory | Policing - ON or OFF |
| 1.3.6.1.4.1.251.1.1.18.6.1.19 | ColumnsvcLowPriOverbookFactor | read-write | mandatory | This is the percentage of low priority traffic overbook factor. |
| 1.3.6.1.4.1.251.1.1.18.6.1.20 | ColumnsvcMaxSapConn | read-write | mandatory | Maximum SVCs this SAP |
| 1.3.6.1.4.1.251.1.1.18.6.1.21 | ColumnsvcCurSapConn | read-only | mandatory | Current SVC count this SAP |
| 1.3.6.1.4.1.251.1.1.18.6.1.22 | ColumnsvcLinkNo | read-write | mandatory | This is the physical link number associated with this SAP |
| 1.3.6.1.4.1.251.1.1.18.6.1.23 | ColumnsvcVpiMapping | read-write | mandatory | VPI and VPCI mapping status |
| 1.3.6.1.4.1.251.1.1.18.6.1.24 | ColumnsvcQosRoute | read-write | mandatory | QoS based route |
| 1.3.6.1.4.1.251.1.1.18.6.1.25 | ColumnsvcSwtch | read-write | mandatory | UNI Interface Type |
| 1.3.6.1.4.1.251.1.1.18.6.1.26 | ColumnsvcRestart | read-write | mandatory | Send Restart when link is up |
| 1.3.6.1.4.1.251.1.1.18.6.1.27 | ColumnsvcE164Addr | read-write | mandatory | The E.164 address for this SAP |
| 1.3.6.1.4.1.251.1.1.18.6.1.28 | ColumnsvcAutoSapOff | read-write | mandatory | This option allows a Sap Status to be automatically turned OFF after T309 expiry. Select Yes(1) if a sap (which was ON before) is to be turned OFF after T309 e… |
| 1.3.6.1.4.1.251.1.1.18.7 | TablesvcTable | not-accessible | mandatory | This table contains information on each on SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1 | RowsvcEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.7.1.1 | ColumnsvcId | read-only | mandatory | The svc ID number |
| 1.3.6.1.4.1.251.1.1.18.7.1.2 | ColumnsvcDSlot | read-only | mandatory | The destination slot of the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.3 | ColumnsvcDLink | read-only | mandatory | The destination link of the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.4 | ColumnsvcDvci | read-only | mandatory | The destination virtual circuit identifier for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.5 | ColumnsvcDvpi | read-only | mandatory | The destination virtual path identifier for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.6 | ColumnsvcDE164 | read-only | mandatory | The destination E.164 address for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.7 | ColumnsvcDE164Sub | read-only | mandatory | The destination sub-address for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.8 | ColumnsvcSSlot | read-only | mandatory | The source slot of the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.9 | ColumnsvcSLink | read-only | mandatory | The source link of the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.10 | ColumnsvcSvci | read-only | mandatory | The source virtual circuit identifier for a SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.11 | ColumnsvcSvpi | read-only | mandatory | The source virtual path identifier for a SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.12 | ColumnsvcSE164 | read-only | mandatory | The source E.164 address for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.13 | ColumnsvcSE164Sub | read-only | mandatory | The source sub-address for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.14 | ColumnsvcForwardPeakCellRate | read-only | mandatory | The forward user cell rate for a SVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to the … |
| 1.3.6.1.4.1.251.1.1.18.7.1.15 | ColumnsvcForwardPeakMode | read-only | mandatory | SVC/SVP Forward Peak Mode |
| 1.3.6.1.4.1.251.1.1.18.7.1.16 | ColumnsvcBackwardPeakCellRate | read-only | mandatory | The backward user cell rate for a SVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to th… |
| 1.3.6.1.4.1.251.1.1.18.7.1.17 | ColumnsvcBackwardPeakMode | read-only | mandatory | SVC/SVP Backward Peak Mode |
| 1.3.6.1.4.1.251.1.1.18.7.1.18 | ColumnsvcForwardSustainableCellRate | read-only | mandatory | The sustainable forward cell rate for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.19 | ColumnsvcForwardMaxBurstSize | read-only | mandatory | The forward maximum burst size for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.20 | ColumnsvcForwardSustainableMode | read-only | mandatory | SVC/SVP Forward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.18.7.1.21 | ColumnsvcBackwardSustainableCellRate | read-only | mandatory | The sustainable backward cell rate for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.22 | ColumnsvcBackwardMaxBurstSize | read-only | mandatory | The backward maximum burst size for the SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.23 | ColumnsvcBackwardSustainableMode | read-only | mandatory | SVC/SVP Backward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.18.7.1.24 | ColumnsvcQoSClass | read-only | mandatory | CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service … |
| 1.3.6.1.4.1.251.1.1.18.7.1.25 | ColumnsvcBillTag | read-only | mandatory | This identifies the billable SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.26 | ColumnsvcDuration | read-only | mandatory | Duration of the SVC in milliseconds. |
| 1.3.6.1.4.1.251.1.1.18.7.1.27 | ColumnsvcType | read-only | mandatory | The type of SVC. |
| 1.3.6.1.4.1.251.1.1.18.7.1.28 | ColumnsvcStatus | read-write | mandatory | If this object is set to invalid (2), the SVC is cleared and the entry is removed. If set to active(4) then the SVC is active. |
| 1.3.6.1.4.1.251.1.1.18.7.1.29 | ColumnsvcNumLeaves | read-only | mandatory | Number of multicast leaves |
| 1.3.6.1.4.1.251.1.1.18.7.1.30 | ColumnsvcInternalVpi | read-only | mandatory | internal VPI used for multicast operation |
| 1.3.6.1.4.1.251.1.1.18.7.1.31 | ColumnsvcInternalVci | read-only | mandatory | internal VCI used for multicast operation |
| 1.3.6.1.4.1.251.1.1.18.8 | TablesPvcTable | not-accessible | mandatory | This table contains information on Semi-Permanent Virtual Circuits (SPVCs). |
| 1.3.6.1.4.1.251.1.1.18.8.1 | RowsPvcEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.8.1.1 | ColumnsPvcId | read-write | mandatory | Slot-unique SPVC identifier. |
| 1.3.6.1.4.1.251.1.1.18.8.1.2 | ColumnsPvcCallId | read-only | mandatory | Call identifier. |
| 1.3.6.1.4.1.251.1.1.18.8.1.3 | ColumnsPvcLink | read-write | mandatory | The physical link for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.4 | ColumnsPvcAddress | read-write | mandatory | The E.164 address for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.5 | ColumnsPvcForwardPeakCellRate | read-write | mandatory | The forward user cell rate for an SPVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to th… |
| 1.3.6.1.4.1.251.1.1.18.8.1.6 | ColumnsPvcForwardPeakMode | read-write | mandatory | SPVC/SPVP Forward Peak Mode |
| 1.3.6.1.4.1.251.1.1.18.8.1.7 | ColumnsPvcBackwardPeakCellRate | read-write | mandatory | The backward user cell rate for an SPVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to … |
| 1.3.6.1.4.1.251.1.1.18.8.1.8 | ColumnsPvcBackwardPeakMode | read-write | mandatory | SPVC/SPVP Backward Peak Mode |
| 1.3.6.1.4.1.251.1.1.18.8.1.9 | ColumnsPvcForwardSustainableCellRate | read-write | mandatory | The sustainable forward cell rate for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.10 | ColumnsPvcForwardMaxBurstSize | read-write | mandatory | The forward maximum burst size for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.11 | ColumnsPvcForwardSustainableMode | read-write | mandatory | SPVC/SPVP Forward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.18.8.1.12 | ColumnsPvcBackwardSustainableCellRate | read-write | mandatory | The sustainable backward cell rate for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.13 | ColumnsPvcBackwardMaxBurstSize | read-write | mandatory | The backward maximum burst size for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.14 | ColumnsPvcBackwardSustainableMode | read-write | mandatory | SPVC/SPVP Backward Sustained Mode |
| 1.3.6.1.4.1.251.1.1.18.8.1.15 | ColumnsPvcQoSClass | read-write | mandatory | CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) has low priority and the ce… |
| 1.3.6.1.4.1.251.1.1.18.8.1.16 | ColumnsPvcSourceVci | read-write | mandatory | The source virtual circuit identifier for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.17 | ColumnsPvcSourceVpi | read-write | mandatory | The source virtual path identifier for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.18 | ColumnsPvcTargetVci | read-write | mandatory | The target virtual circuit identifier for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.19 | ColumnsPvcTargetVpi | read-write | mandatory | The target virtual path identifier for the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.20 | ColumnsPvcRetry | read-write | mandatory | Retry timeout. Zero represents an infinite timeout. |
| 1.3.6.1.4.1.251.1.1.18.8.1.21 | ColumnsPvcConnectTime | read-only | mandatory | Connect time in ms. |
| 1.3.6.1.4.1.251.1.1.18.8.1.22 | ColumnsPvcNumberRetries | read-write | mandatory | Number of retries to attempt. Zero represents no limit. |
| 1.3.6.1.4.1.251.1.1.18.8.1.23 | ColumnsPvcFailures | read-only | mandatory | A count of the SPVC setup failures. |
| 1.3.6.1.4.1.251.1.1.18.8.1.24 | ColumnsPvcAlertFailures | read-write | mandatory | Describes the circumstances under which to issue an Alert message to the NMS. |
| 1.3.6.1.4.1.251.1.1.18.8.1.25 | ColumnsPvcCauseDiag | read-only | mandatory | Cause and diagnostic codes. |
| 1.3.6.1.4.1.251.1.1.18.8.1.26 | ColumnsPvcType | read-only | mandatory | If the SPVC entry is passive, it will not try to initiate a call. An active will attempt to build an SPVC at intervals set by the retry field. |
| 1.3.6.1.4.1.251.1.1.18.8.1.27 | ColumnsPvcCallState | read-write | mandatory | Sets the state of the SPVC. Set the value to invalid(3) to tear down the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.28 | ColumnsPvcStatus | read-only | mandatory | Describes the state of the SPVC. |
| 1.3.6.1.4.1.251.1.1.18.8.1.29 | ColumnsPvcCauseDiagCode | read-only | mandatory | Cause and diagnostic codes as defined in UNI-3.0 Annex E . |
| 1.3.6.1.4.1.251.1.1.18.8.1.30 | ColumnsPvcMulticast | read-write | mandatory | pt-pt - point-to-point SPVC; pt-mpt - point-to-multipoint SPVC; bidirect-root: pt-mpt birection root. |
| 1.3.6.1.4.1.251.1.1.18.9 | TablesvcQ93bStatTable | not-accessible | mandatory | This table contains statistical protocol information for each link. |
| 1.3.6.1.4.1.251.1.1.18.9.1 | RowsvcQ93bStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.9.1.1 | ColumnsvcQ93bStatSAP | read-only | mandatory | This is the layer 3 Service Access Point for the link. |
| 1.3.6.1.4.1.251.1.1.18.9.1.2 | ColumnsvcQ93bStatActive | read-only | mandatory | Number of calls currently active on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.3 | ColumnsvcQ93bStatAccumalative | read-only | mandatory | Total number of calls established on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.4 | ColumnsvcQ93bStatCallProcTx | read-only | mandatory | Call Proceeding pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.5 | ColumnsvcQ93bStatConnTx | read-only | mandatory | Connect pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.6 | ColumnsvcQ93bStatConnAckTx | read-only | mandatory | Connect Acknowledge pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.7 | ColumnsvcQ93bStatSetupTx | read-only | mandatory | Setup pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.8 | ColumnsvcQ93bStatRelTx | read-only | mandatory | Release pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.9 | ColumnsvcQ93bStatRelCmpltTx | read-only | mandatory | Release Complete pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.10 | ColumnsvcQ93bStatRstTx | read-only | mandatory | Restart pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.11 | ColumnsvcQ93bStatRstAckTx | read-only | mandatory | Restart Acknowledge pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.12 | ColumnsvcQ93bStatStatTx | read-only | mandatory | Status pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.13 | ColumnsvcQ93bStatStatEnqTx | read-only | mandatory | Status Enquiry pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.14 | ColumnsvcQ93bStatAddPtyTx | read-only | mandatory | Add Party pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.15 | ColumnsvcQ93bStatAddPtyAckTx | read-only | mandatory | Add Party Acknowledge pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.16 | ColumnsvcQ93bStatAddPtyRejTx | read-only | mandatory | Add Party Reject pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.17 | ColumnsvcQ93bStatDropPtyTx | read-only | mandatory | Drop Party pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.18 | ColumnsvcQ93bStatDropPtyAckTx | read-only | mandatory | Drop Party Acknowledge pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.19 | ColumnsvcQ93bStatLstCauseTx | read-only | mandatory | Last cause code transmitted. |
| 1.3.6.1.4.1.251.1.1.18.9.1.20 | ColumnsvcQ93bStatLstDiagTx | read-only | mandatory | Last diagnostic code transmitted. |
| 1.3.6.1.4.1.251.1.1.18.9.1.21 | ColumnsvcQ93bStatCallProcRx | read-only | mandatory | Call Proceeding pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.22 | ColumnsvcQ93bStatConnRx | read-only | mandatory | Connect pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.23 | ColumnsvcQ93bStatConnAckRx | read-only | mandatory | Connect Acknowledge pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.24 | ColumnsvcQ93bStatSetupRx | read-only | mandatory | Setup pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.25 | ColumnsvcQ93bStatRelRx | read-only | mandatory | Release pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.26 | ColumnsvcQ93bStatRelCmpltRx | read-only | mandatory | Release Complete pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.27 | ColumnsvcQ93bStatRstRx | read-only | mandatory | Restart pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.28 | ColumnsvcQ93bStatRstAckRx | read-only | mandatory | Restart Acknowledge pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.29 | ColumnsvcQ93bStatStatRx | read-only | mandatory | Status pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.30 | ColumnsvcQ93bStatStatEnqRx | read-only | mandatory | Status Enquiry pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.31 | ColumnsvcQ93bStatAddPtyRx | read-only | mandatory | Add Party pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.32 | ColumnsvcQ93bStatAddPtyAckRx | read-only | mandatory | Add Party Acknowledge pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.33 | ColumnsvcQ93bStatAddPtyRejRx | read-only | mandatory | Add Party Reject pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.34 | ColumnsvcQ93bStatDropPtyRx | read-only | mandatory | Drop Party pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.35 | ColumnsvcQ93bStatDropPtyAckRx | read-only | mandatory | Drop Party Acknowledge pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.36 | ColumnsvcQ93bStatLstCauseRx | read-only | mandatory | Last cause code received. |
| 1.3.6.1.4.1.251.1.1.18.9.1.37 | ColumnsvcQ93bStatLstDiagRx | read-only | mandatory | Last diagnostic code received. |
| 1.3.6.1.4.1.251.1.1.18.9.1.38 | ColumnsvcQ93bStatClr | read-write | mandatory | Clear Q.93B statistics for this SAP. |
| 1.3.6.1.4.1.251.1.1.18.9.1.39 | ColumnsvcQ93bStatDiagTx | read-only | mandatory | Tx SAP diagnostic codes |
| 1.3.6.1.4.1.251.1.1.18.9.1.40 | ColumnsvcQ93bStatDiagRx | read-only | mandatory | Rx SAP diagnostic codes |
| 1.3.6.1.4.1.251.1.1.18.10 | TablesvcQsaalStatTable | not-accessible | mandatory | This table contains protocol information for the Q.SAAL layer for each link. |
| 1.3.6.1.4.1.251.1.1.18.10.1 | RowsvcQsaalStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.10.1.1 | ColumnsvcQsaalStatSAP | read-only | mandatory | This is the layer 3 Service Access Point for the link. |
| 1.3.6.1.4.1.251.1.1.18.10.1.2 | ColumnsvcQsaalStatOutSduDisc | read-only | mandatory | Outgoing SDUs discarded. |
| 1.3.6.1.4.1.251.1.1.18.10.1.3 | ColumnsvcQsaalStatInPduErr | read-only | mandatory | Number of incoming PDUs with a reception error. |
| 1.3.6.1.4.1.251.1.1.18.10.1.4 | ColumnsvcQsaalStatInPduDisc | read-only | mandatory | Number of incoming PDUs discarded. |
| 1.3.6.1.4.1.251.1.1.18.10.1.5 | ColumnsvcQsaalStatOutPduErr | read-only | mandatory | Number of outgoing PDUs with a transmission error. |
| 1.3.6.1.4.1.251.1.1.18.10.1.6 | ColumnsvcQsaalStatOutPduDisc | read-only | mandatory | Number of outgoing PDUs discarded. |
| 1.3.6.1.4.1.251.1.1.18.10.1.7 | ColumnsvcQsaalStatBgnTx | read-only | mandatory | BGN pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.8 | ColumnsvcQsaalStatBgakTx | read-only | mandatory | BGAK pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.9 | ColumnsvcQsaalStatBgrejTx | read-only | mandatory | BGREJ pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.10 | ColumnsvcQsaalStatEndTx | read-only | mandatory | END pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.11 | ColumnsvcQsaalStatRsTx | read-only | mandatory | RS pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.12 | ColumnsvcQsaalStatRsakTx | read-only | mandatory | RSAK pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.13 | ColumnsvcQsaalStatSdTx | read-only | mandatory | SD pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.14 | ColumnsvcQsaalStatSdpTx | read-only | mandatory | SDP pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.15 | ColumnsvcQsaalStatPollTx | read-only | mandatory | POLL pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.16 | ColumnsvcQsaalStatStatTx | read-only | mandatory | STAT pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.17 | ColumnsvcQsaalStatUstatTx | read-only | mandatory | USTAT pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.18 | ColumnsvcQsaalStatUdTx | read-only | mandatory | UD pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.19 | ColumnsvcQsaalStatMdTx | read-only | mandatory | MD pdus transmitted on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.20 | ColumnsvcQsaalStatBgnRx | read-only | mandatory | BGN pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.21 | ColumnsvcQsaalStatBgakRx | read-only | mandatory | BGAK pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.22 | ColumnsvcQsaalStatBgrejRx | read-only | mandatory | BGREJ pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.23 | ColumnsvcQsaalStatEndRx | read-only | mandatory | END pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.24 | ColumnsvcQsaalStatRsRx | read-only | mandatory | RS pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.25 | ColumnsvcQsaalStatRsakRx | read-only | mandatory | RSAK pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.26 | ColumnsvcQsaalStatSdRx | read-only | mandatory | SD pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.27 | ColumnsvcQsaalStatSdpRx | read-only | mandatory | SDP pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.28 | ColumnsvcQsaalStatPollRx | read-only | mandatory | POLL pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.29 | ColumnsvcQsaalStatStatRx | read-only | mandatory | STAT pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.30 | ColumnsvcQsaalStatUstatRx | read-only | mandatory | USTAT pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.31 | ColumnsvcQsaalStatUdRx | read-only | mandatory | UD pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.32 | ColumnsvcQsaalStatMdRx | read-only | mandatory | MD pdus received on this SAP. |
| 1.3.6.1.4.1.251.1.1.18.10.1.33 | ColumnsvcQsaalStatClr | read-write | mandatory | Clear statistics for this SAP. |
| 1.3.6.1.4.1.251.1.1.18.11 | ScalarsvcQsaalTmrPoll | read-write | mandatory | SSCOP Timer_POLL (8=800ms). |
| 1.3.6.1.4.1.251.1.1.18.12 | ScalarsvcQsaalTmrKeepAlive | read-write | mandatory | SSCOP Timer_KEEPALIVE (20=2seconds). |
| 1.3.6.1.4.1.251.1.1.18.13 | ScalarsvcQsaalTmrNoResponse | read-write | mandatory | SSCOP Timer_NORESPONSE (100=10seconds). |
| 1.3.6.1.4.1.251.1.1.18.14 | ScalarsvcQsaalTmrCC | read-write | mandatory | SSCOP Timer_CC (20=2seconds). |
| 1.3.6.1.4.1.251.1.1.18.15 | ScalarsvcQsaalMaxPD | read-write | mandatory | SSCOP Maximum PD. |
| 1.3.6.1.4.1.251.1.1.18.16 | ScalarsvcQ93bTmrT303 | read-write | mandatory | Q.93B T303 (40=4seconds). |
| 1.3.6.1.4.1.251.1.1.18.17 | ScalarsvcQ93bTmrT310 | read-write | mandatory | Q.93B T310 (200=20seconds). |
| 1.3.6.1.4.1.251.1.1.18.18 | ScalarsvcQ93bTmrT308 | read-write | mandatory | Q.93B T308 (300=30seconds). |
| 1.3.6.1.4.1.251.1.1.18.19 | ScalarsvcQ93bTmrT309 | read-write | mandatory | Q.93B T309 (150=15seconds). |
| 1.3.6.1.4.1.251.1.1.18.20 | ScalarmaxOutstanding | read-write | mandatory | Max Outgoing Outstanding Calls. |
| 1.3.6.1.4.1.251.1.1.18.21 | ScalarsvcLoadRoute | read-write | mandatory | Poke point for loading routing tables |
| 1.3.6.1.4.1.251.1.1.18.22 | ScalarsvcHalfConTimer | read-write | mandatory | SVC half connect recovery poll timer |
| 1.3.6.1.4.1.251.1.1.18.23 | ScalarsvcHalfConCnt | read-only | mandatory | SVC half connect counter |
| 1.3.6.1.4.1.251.1.1.18.24 | ScalarsvcQ93bTmrT398 | read-write | mandatory | Q.93B T398 (40= 4 seconds). |
| 1.3.6.1.4.1.251.1.1.18.25 | ScalarsvcQ93bTmrT399 | read-write | mandatory | Q.93B T399 (140= 14 seconds). |
| 1.3.6.1.4.1.251.1.1.18.26 | ScalarsvcRetryPeriod | read-write | mandatory | Retry Period |
| 1.3.6.1.4.1.251.1.1.18.27 | TablesvcCellRateTable | not-accessible | mandatory | This table contains information about the limitations on Cell Rates on link |
| 1.3.6.1.4.1.251.1.1.18.27.1 | RowsvcCellRateEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.27.1.1 | ColumnsvcCRLinkNo | read-only | mandatory | This is the physical link number associated with this SAP |
| 1.3.6.1.4.1.251.1.1.18.27.1.2 | ColumnsvcPCRCLP01Max | read-write | mandatory | PCRCLP01 Max(0 disables checking) |
| 1.3.6.1.4.1.251.1.1.18.27.1.3 | ColumnsvcSCRMax | read-write | mandatory | SCR Max(0 disables checking) |
| 1.3.6.1.4.1.251.1.1.18.27.1.4 | ColumnsvcMBSMax | read-write | mandatory | MBS Max(0 disables checking) |
| 1.3.6.1.4.1.251.1.1.18.28 | TablesvcTrafficTable | not-accessible | mandatory | This table contains information about the limitations on Cell Rates on link |
| 1.3.6.1.4.1.251.1.1.18.28.1 | RowsvcTrafficEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.18.28.1.1 | ColumnsvcTLinkNo | read-only | mandatory | Lnk Number |
| 1.3.6.1.4.1.251.1.1.18.28.1.2 | ColumnsvcCBRallowed | read-write | mandatory | Allows or disallows CBR traffic |
| 1.3.6.1.4.1.251.1.1.18.28.1.3 | ColumnsvcVBRHallowed | read-write | mandatory | Allows or disallows VBR High traffic |
| 1.3.6.1.4.1.251.1.1.18.28.1.4 | ColumnsvcVBRMallowed | read-write | mandatory | Allows or disallows VBR Med traffic |
| 1.3.6.1.4.1.251.1.1.18.28.1.5 | ColumnsvcVBRLUBRallowed | read-write | mandatory | Allows or disallows VBR Low/UBR traffic |
| 1.3.6.1.4.1.251.1.1.18.28.1.6 | ColumnsvcVBRLUBRsubtractpercent | read-write | mandatory | Specifies a percentage of BW to be subtracted for VBR Low/UBR traffic |
| 1.3.6.1.4.1.251.1.1.19 | Nodedv2CE | |||
| 1.3.6.1.4.1.251.1.1.19.1 | TableceTable | not-accessible | mandatory | Configuration Table for dv2CE Links |
| 1.3.6.1.4.1.251.1.1.19.1.1 | RowceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.19.1.1.1 | ColumnceLinkNo | read-only | mandatory | Link Number for Table Entry |
| 1.3.6.1.4.1.251.1.1.19.1.1.2 | ColumnceEnable | read-write | mandatory | Setting to yes(1) enables the Link |
| 1.3.6.1.4.1.251.1.1.19.1.1.3 | ColumnceMode | read-write | mandatory | Service Clock Recovery Mode |
| 1.3.6.1.4.1.251.1.1.19.1.1.4 | ColumncePriority | read-only | mandatory | Set to high for normal CBR operation |
| 1.3.6.1.4.1.251.1.1.19.1.1.5 | ColumncePvcValid | read-only | mandatory | Indicates if valid PVC exists for Link |
| 1.3.6.1.4.1.251.1.1.19.1.1.6 | ColumnceDstSlot | read-only | mandatory | Destination Slot for PVC |
| 1.3.6.1.4.1.251.1.1.19.1.1.7 | ColumnceDstLink | read-only | mandatory | Destination Link for PVC |
| 1.3.6.1.4.1.251.1.1.19.1.1.8 | ColumnceDstVpi | read-only | mandatory | Destination VPI for PVC |
| 1.3.6.1.4.1.251.1.1.19.1.1.9 | ColumnceDstVci | read-only | mandatory | Destination VCI for PVC |
| 1.3.6.1.4.1.251.1.1.19.1.1.10 | ColumnceCDV | read-write | mandatory | Cell Delay Variation Tolerance |
| 1.3.6.1.4.1.251.1.1.19.1.1.11 | ColumnceCDVMax | read-write | mandatory | Cell Delay Variation Tolerance |
| 1.3.6.1.4.1.251.1.1.19.1.1.24 | ColumnceMulticast | read-only | mandatory | Is link part of multicast tree |
| 1.3.6.1.4.1.251.1.1.19.1.1.25 | ColumnceXhInt | read-only | mandatory | XH Interface for Link |
| 1.3.6.1.4.1.251.1.1.19.2 | TableceStatTable | not-accessible | mandatory | status information about the dv2CE. |
| 1.3.6.1.4.1.251.1.1.19.2.1 | RowceStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.19.2.1.1 | ColumnceStatPortNo | read-only | mandatory | Link Number for Table Entry |
| 1.3.6.1.4.1.251.1.1.19.2.1.2 | ColumnceStatReset | read-write | mandatory | Clear Statistics for Link |
| 1.3.6.1.4.1.251.1.1.19.2.1.3 | ColumnceStatTxState | read-only | mandatory | Indicates if data is being received and segmented |
| 1.3.6.1.4.1.251.1.1.19.2.1.4 | ColumnceStatRxState | read-only | mandatory | Indicates if data being reassembled and transmitted |
| 1.3.6.1.4.1.251.1.1.19.2.1.5 | ColumnceTxCnt | read-only | mandatory | Count of Cells transmitted from switch fabric |
| 1.3.6.1.4.1.251.1.1.19.2.1.6 | ColumnceRxCnt | read-only | mandatory | Count of Cells received into switch fabric |
| 1.3.6.1.4.1.251.1.1.19.2.1.7 | ColumnceOflCnt | read-only | mandatory | Count of 1S intervals during which RX FIFO overflowed |
| 1.3.6.1.4.1.251.1.1.19.2.1.8 | ColumnceUflCnt | read-only | mandatory | Count of 1S intervals during which RX FIFO underflowed |
| 1.3.6.1.4.1.251.1.1.19.2.1.9 | ColumnceDisCnt | read-only | mandatory | Count of 1S intervals during which cells were discarded |
| 1.3.6.1.4.1.251.1.1.19.2.1.10 | ColumnceInvCnt | read-only | mandatory | Count of 1S intervals during which cells were invented |
| 1.3.6.1.4.1.251.1.1.19.2.1.11 | ColumnceResCnt | read-only | mandatory | Count of 1S intervals during which AAL1 resync occurred |
| 1.3.6.1.4.1.251.1.1.19.2.1.12 | ColumnceFifoLvlCnt | read-only | mandatory | Number of Cells currently in FIFO |
| 1.3.6.1.4.1.251.1.1.19.21 | ScalarcePriVal | read-only | mandatory | Primary Clock Valid |
| 1.3.6.1.4.1.251.1.1.19.22 | ScalarceSecVal | read-only | mandatory | Secondary Clock Valid |
| 1.3.6.1.4.1.251.1.1.19.23 | ScalarceClkSel | read-only | mandatory | Clock Select |
| 1.3.6.1.4.1.251.1.1.19.24 | ScalarceClkInp | read-only | mandatory | Is there clock input |
| 1.3.6.1.4.1.251.1.1.19.25 | ScalarceStr3 | read-only | mandatory | Is there STR3 |
| 1.3.6.1.4.1.251.1.1.20 | Nodedv2VE | |||
| 1.3.6.1.4.1.251.1.1.20.1 | TableveTable | not-accessible | mandatory | Configuration Table for dv2VE Links |
| 1.3.6.1.4.1.251.1.1.20.1.1 | RowveEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.20.1.1.1 | ColumnveLinkNo | read-only | mandatory | Link Number for Table Entry |
| 1.3.6.1.4.1.251.1.1.20.1.1.2 | ColumnveEnable | read-write | mandatory | Setting to yes(1) enables the Link |
| 1.3.6.1.4.1.251.1.1.20.1.1.3 | ColumnveMode | read-only | mandatory | Service Clock Recovery Mode |
| 1.3.6.1.4.1.251.1.1.20.1.1.4 | ColumnvePriority | read-only | mandatory | Set to high for normal CBR operation |
| 1.3.6.1.4.1.251.1.1.20.1.1.5 | ColumnvePvcValid | read-only | mandatory | Indicates if valid PVC exists for Link |
| 1.3.6.1.4.1.251.1.1.20.1.1.6 | ColumnveDstSlot | read-only | mandatory | Destination Slot for PVC |
| 1.3.6.1.4.1.251.1.1.20.1.1.7 | ColumnveDstLink | read-only | mandatory | Destination Link for PVC |
| 1.3.6.1.4.1.251.1.1.20.1.1.8 | ColumnveDstVpi | read-only | mandatory | Destination VPI for PVC |
| 1.3.6.1.4.1.251.1.1.20.1.1.9 | ColumnveDstVci | read-only | mandatory | Destination VCI for PVC |
| 1.3.6.1.4.1.251.1.1.20.1.1.10 | ColumnveCDV | read-write | mandatory | Cell Delay Variation Tolerance |
| 1.3.6.1.4.1.251.1.1.20.1.1.11 | ColumnveCDVMax | read-write | mandatory | Cell Delay Variation Tolerance |
| 1.3.6.1.4.1.251.1.1.20.1.1.24 | ColumnveMulticast | read-only | mandatory | Is link part of multicast tree |
| 1.3.6.1.4.1.251.1.1.20.1.1.25 | ColumnveXhInt | read-only | mandatory | XH Interface for Link |
| 1.3.6.1.4.1.251.1.1.20.2 | TableveStatTable | not-accessible | mandatory | status information about the dv2VE. |
| 1.3.6.1.4.1.251.1.1.20.2.1 | RowveStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.20.2.1.1 | ColumnveStatPortNo | read-only | mandatory | Link Number for Table Entry |
| 1.3.6.1.4.1.251.1.1.20.2.1.2 | ColumnveStatReset | read-write | mandatory | Clear Statistics for Link |
| 1.3.6.1.4.1.251.1.1.20.2.1.3 | ColumnveStatTxState | read-only | mandatory | Indicates if data is being received and segmented |
| 1.3.6.1.4.1.251.1.1.20.2.1.4 | ColumnveStatRxState | read-only | mandatory | Indicates if data being reassembled and transmitted |
| 1.3.6.1.4.1.251.1.1.20.2.1.5 | ColumnveTxCnt | read-only | mandatory | Count of Cells transmitted from switch fabric |
| 1.3.6.1.4.1.251.1.1.20.2.1.6 | ColumnveRxCnt | read-only | mandatory | Count of Cells received into switch fabric |
| 1.3.6.1.4.1.251.1.1.20.2.1.7 | ColumnveOflCnt | read-only | mandatory | Count of 1S intervals during which RX FIFO overflowed or underflowed |
| 1.3.6.1.4.1.251.1.1.20.2.1.8 | ColumnveUflCnt | read-only | mandatory | Count of 1S intervals during which RX FIFO underflowed |
| 1.3.6.1.4.1.251.1.1.20.2.1.9 | ColumnveDisCnt | read-only | mandatory | Count of 1S intervals during which cells were discarded |
| 1.3.6.1.4.1.251.1.1.20.2.1.10 | ColumnveInvCnt | read-only | mandatory | Count of 1S intervals during which cells were invented |
| 1.3.6.1.4.1.251.1.1.20.2.1.11 | ColumnveResCnt | read-only | mandatory | Count of 1S intervals during which AAL1 resync occurred |
| 1.3.6.1.4.1.251.1.1.20.2.1.12 | ColumnveFifoLvlCnt | read-only | mandatory | Number of Cells currently in FIFO |
| 1.3.6.1.4.1.251.1.1.21 | Nodedv2SystemClocks | |||
| 1.3.6.1.4.1.251.1.1.21.1 | ScalarautoRevert | read-write | mandatory | Automatic Revert after Timing Source Recovery |
| 1.3.6.1.4.1.251.1.1.21.2 | ScalarrevertTimer | read-write | mandatory | Revert Timer in Seconds |
| 1.3.6.1.4.1.251.1.1.21.3 | ScalarforceRevert | read-write | mandatory | Force Immediate Revert |
| 1.3.6.1.4.1.251.1.1.21.4 | ScalarforceSecondary | read-write | mandatory | Force Secondary Source Timing |
| 1.3.6.1.4.1.251.1.1.21.5 | ScalaralarmStatus | read-only | mandatory | Timing Alarm Status |
| 1.3.6.1.4.1.251.1.1.21.6 | ScalarinService | read-only | mandatory | Card in Service |
| 1.3.6.1.4.1.251.1.1.21.7 | TableprimaryClockTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.7.1 | RowprimaryEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.7.1.1 | ColumnpIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.7.1.2 | ColumnpValidSource | read-only | mandatory | Valid Timing Source |
| 1.3.6.1.4.1.251.1.1.21.7.1.3 | ColumnpOnOffLine | read-write | mandatory | On / Off line Toggle |
| 1.3.6.1.4.1.251.1.1.21.7.1.4 | ColumnpSlotNumber | read-write | mandatory | Primary Source Slot Number |
| 1.3.6.1.4.1.251.1.1.21.7.1.5 | ColumnpSysRefSelect | read-write | mandatory | System Reference Select |
| 1.3.6.1.4.1.251.1.1.21.7.1.6 | ColumnpActiveTimingSource | read-only | mandatory | Active Timing Reference |
| 1.3.6.1.4.1.251.1.1.21.7.1.7 | ColumnpInputLineOk | read-only | mandatory | Input Line OK |
| 1.3.6.1.4.1.251.1.1.21.7.1.8 | ColumnpSysRefTimingOk | read-only | mandatory | System Reference Timing OK |
| 1.3.6.1.4.1.251.1.1.21.8 | TablesecondaryClockTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.8.1 | RowsecondaryEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.8.1.1 | ColumnsIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.8.1.2 | ColumnsValidSource | read-only | mandatory | Valid Timing Source |
| 1.3.6.1.4.1.251.1.1.21.8.1.3 | ColumnsOnOffLine | read-write | mandatory | On / Off line Toggle |
| 1.3.6.1.4.1.251.1.1.21.8.1.4 | ColumnsSlotNumber | read-write | mandatory | Secondary Source Slot Number |
| 1.3.6.1.4.1.251.1.1.21.8.1.5 | ColumnsSysRefSelect | read-write | mandatory | System Reference Select |
| 1.3.6.1.4.1.251.1.1.21.8.1.6 | ColumnsActiveTimingSource | read-only | mandatory | Active Timing Reference |
| 1.3.6.1.4.1.251.1.1.21.8.1.7 | ColumnsInputLineOk | read-only | mandatory | Input Line OK |
| 1.3.6.1.4.1.251.1.1.21.8.1.8 | ColumnsSysRefTimingOk | read-only | mandatory | System Reference Timing OK |
| 1.3.6.1.4.1.251.1.1.21.9 | Scalarstr3Configured | read-only | mandatory | CAT Card present |
| 1.3.6.1.4.1.251.1.1.21.10 | TablepCATcontrolTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.10.1 | RowpCATcontrolEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.10.1.1 | ColumnpccIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.10.1.2 | Columnpccatlimtype | read-write | mandatory | Type of CAT LIM |
| 1.3.6.1.4.1.251.1.1.21.10.1.3 | Columnpccatsendcode | read-write | mandatory | Send code to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.10.1.4 | Columnpccatactivate | read-write | mandatory | Activate NTM Code |
| 1.3.6.1.4.1.251.1.1.21.10.1.5 | Columnpccatsendconfig | read-write | mandatory | Send Configuration to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.10.1.6 | Columnpccatbytestransferred | read-only | mandatory | Code bytes transferred to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.10.1.7 | Columnpccatfilexferstat | read-only | mandatory | File transfer status as reported by Slot 0 |
| 1.3.6.1.4.1.251.1.1.21.10.1.8 | Columnpcatforcesecext | read-write | mandatory | Force the secondary external |
| 1.3.6.1.4.1.251.1.1.21.10.1.9 | Columnpcatforcesecstr3 | read-write | mandatory | Force the secondary stratum 3 |
| 1.3.6.1.4.1.251.1.1.21.10.1.10 | Columnpcatcommand | read-only | mandatory | Internal Use |
| 1.3.6.1.4.1.251.1.1.21.10.1.11 | Columnpcatplaceholder1 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.10.1.12 | Columnpcatplaceholder2 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.10.1.13 | Columnpcconoffline | read-write | mandatory | Put NTM LIM on or offline |
| 1.3.6.1.4.1.251.1.1.21.11 | TablesCATcontrolTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.11.1 | RowsCATcontrolEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.11.1.1 | ColumnsccIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.11.1.2 | Columnsccatlimtype | read-write | mandatory | Type of NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.11.1.3 | Columnsccatsendcode | read-write | mandatory | Download code to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.11.1.4 | Columnsccatactivate | read-write | mandatory | Activate NTM Code |
| 1.3.6.1.4.1.251.1.1.21.11.1.5 | Columnsccatsendconfig | read-write | mandatory | Download Configuration to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.11.1.6 | Columnsccatbytestransferred | read-only | mandatory | Code bytes transferred to NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.11.1.7 | Columnsccatfilexferstat | read-only | mandatory | File transfer status as reported by Slot 0 |
| 1.3.6.1.4.1.251.1.1.21.11.1.8 | Columnscatcommand | read-only | mandatory | Internal Use |
| 1.3.6.1.4.1.251.1.1.21.11.1.9 | Columnscatplaceholder1 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.11.1.10 | Columnscatplaceholder2 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.11.1.11 | Columnscconoffline | read-write | mandatory | Put NTM LIM on or offline |
| 1.3.6.1.4.1.251.1.1.21.12 | TablepCATstatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.12.1 | RowpCATstatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.12.1.1 | ColumnpscIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.12.1.2 | Columnpscatlimtype | read-only | mandatory | Type of NTM LIM detected |
| 1.3.6.1.4.1.251.1.1.21.12.1.3 | ColumnpsCATFFrevision | read-only | mandatory | NTM LIM Code Revision |
| 1.3.6.1.4.1.251.1.1.21.12.1.4 | ColumnpsCATBootrevision | read-only | mandatory | NTM LIM Boot Revision |
| 1.3.6.1.4.1.251.1.1.21.12.1.5 | Columnpscatfilestatus | read-only | mandatory | Flash file status |
| 1.3.6.1.4.1.251.1.1.21.12.1.6 | ColumnpsCATfilerevision | read-only | mandatory | NTM LIM file Revision |
| 1.3.6.1.4.1.251.1.1.21.12.1.7 | ColumnpsCATHWrevision | read-only | mandatory | NTM LIM Hardware Revision |
| 1.3.6.1.4.1.251.1.1.21.12.1.8 | Columnpscatmode | read-only | mandatory | Operating Mode of NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.12.1.9 | Columnpscaterrorcode | read-only | mandatory | NTM LIM Error Code |
| 1.3.6.1.4.1.251.1.1.21.12.1.10 | Columnpscatplaceholder1 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.12.1.11 | Columnpscatplaceholder2 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.13 | TablesCATstatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.13.1 | RowsCATstatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.13.1.1 | ColumnsscIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.13.1.2 | Columnsscatlimtype | read-only | mandatory | Type of NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.13.1.3 | ColumnssCATFFrevision | read-only | mandatory | NTM LIM Code Revision |
| 1.3.6.1.4.1.251.1.1.21.13.1.4 | ColumnssCATBootrevision | read-only | mandatory | NTM LIM Boot Revision |
| 1.3.6.1.4.1.251.1.1.21.13.1.5 | Columnsscatfilestatus | read-only | mandatory | Flash file status |
| 1.3.6.1.4.1.251.1.1.21.13.1.6 | ColumnssCATfilerevision | read-only | mandatory | NTM LIM file Revision |
| 1.3.6.1.4.1.251.1.1.21.13.1.7 | ColumnssCATHWrevision | read-only | mandatory | NTM LIM Hardware Revision |
| 1.3.6.1.4.1.251.1.1.21.13.1.8 | Columnsscatmode | read-only | mandatory | Operating mode of NTM LIM |
| 1.3.6.1.4.1.251.1.1.21.13.1.9 | Columnsscaterrorcode | read-only | mandatory | NTM LIM Error Code |
| 1.3.6.1.4.1.251.1.1.21.13.1.10 | Columnsscatplaceholder1 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.13.1.11 | Columnsscatplaceholder2 | read-only | mandatory | Placeholder for future MIB changes |
| 1.3.6.1.4.1.251.1.1.21.14 | TablepCATStratum3ConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.14.1 | RowpCATStratum3ConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.14.1.1 | Columnps3cIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.14.1.2 | Columnpcatstr3listener | read-write | mandatory | Configures Stratum 3 Reference |
| 1.3.6.1.4.1.251.1.1.21.14.1.3 | Columnpcatstr3oscillator | read-write | mandatory | Configures Stratum 3 Mode |
| 1.3.6.1.4.1.251.1.1.21.14.1.4 | Columnpcatstr3forcesecondary | read-write | mandatory | Disables Stratum 3 Driver on Primary NTM LIM only |
| 1.3.6.1.4.1.251.1.1.21.14.1.5 | Columnpcatstr3reconfigure | read-write | mandatory | Re-configure Primary Stratum 3 |
| 1.3.6.1.4.1.251.1.1.21.15 | TablesCATStratum3ConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.15.1 | RowsCATStratum3ConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.15.1.1 | Columnss3cIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.15.1.2 | Columnscatstr3listener | read-write | mandatory | Configures Stratum 3 Reference |
| 1.3.6.1.4.1.251.1.1.21.15.1.3 | Columnscatstr3oscillator | read-write | mandatory | Configures Stratum 3 Mode |
| 1.3.6.1.4.1.251.1.1.21.15.1.4 | Columnscatstr3reconfigure | read-write | mandatory | Re-configure Secondary Stratum 3 |
| 1.3.6.1.4.1.251.1.1.21.16 | TablepCATStratum3StatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.16.1 | RowpCATStratum3StatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.16.1.1 | Columnps3sIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.16.1.2 | Columnpcatstr3listenerstatus | read-only | mandatory | What the Stratum 3 is referencing to |
| 1.3.6.1.4.1.251.1.1.21.16.1.3 | Columnpcatstr3driverstatus | read-only | mandatory | What the Stratum 3 output is driving |
| 1.3.6.1.4.1.251.1.1.21.16.1.4 | Columnpcatstr3oscstatus | read-only | mandatory | Stratum 3 oscillator status |
| 1.3.6.1.4.1.251.1.1.21.17 | TablesCATStratum3StatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.17.1 | RowsCATStratum3StatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.17.1.1 | Columnss3sIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.17.1.2 | Columnscatstr3listenerstatus | read-only | mandatory | What the Stratum 3 Listener is referencing |
| 1.3.6.1.4.1.251.1.1.21.17.1.3 | Columnscatstr3driverstatus | read-only | mandatory | What the Stratum 3 output is driving |
| 1.3.6.1.4.1.251.1.1.21.17.1.4 | Columnscatstr3oscstatus | read-only | mandatory | Stratum 3 oscillator status |
| 1.3.6.1.4.1.251.1.1.21.18 | TablepCATBitsConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.18.1 | RowpCATBitsConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.18.1.1 | ColumnpbcIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.18.1.2 | Columnpbcds1V2TxLineLn | read-write | mandatory | Select transmit line length |
| 1.3.6.1.4.1.251.1.1.21.18.1.3 | Columnpbcplaceholder1 | read-write | mandatory | Future Use |
| 1.3.6.1.4.1.251.1.1.21.18.1.4 | ColumnpbcV2FRMRMode | read-write | mandatory | DS1 Framing options. |
| 1.3.6.1.4.1.251.1.1.21.18.1.5 | Columnpbcds1V2Coding | read-write | mandatory | T1 Line Code |
| 1.3.6.1.4.1.251.1.1.21.18.1.6 | ColumnpbcV2Lb | read-write | mandatory | Loopback Selection DS1 |
| 1.3.6.1.4.1.251.1.1.21.18.1.7 | Columnpbcclrperf | read-write | mandatory | Clear the Performance Counters |
| 1.3.6.1.4.1.251.1.1.21.18.1.9 | Columnpbcreconfigure | read-write | mandatory | Re-configure Primary External |
| 1.3.6.1.4.1.251.1.1.21.19 | TablesCATBitsConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.19.1 | RowsCATBitsConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.19.1.1 | ColumnsbcIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.19.1.2 | Columnsbcds1V2TxLineLn | read-write | mandatory | Select transmit line length |
| 1.3.6.1.4.1.251.1.1.21.19.1.3 | Columnsbcplaceholder1 | read-write | mandatory | Future Use |
| 1.3.6.1.4.1.251.1.1.21.19.1.4 | ColumnsbcV2FRMRMode | read-write | mandatory | DS1 Framing options. |
| 1.3.6.1.4.1.251.1.1.21.19.1.5 | Columnsbcds1V2Coding | read-write | mandatory | T1 Line Coding |
| 1.3.6.1.4.1.251.1.1.21.19.1.6 | ColumnsbcV2Lb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.21.19.1.7 | Columnsbcclrperf | read-write | mandatory | Clear the Performance Counters |
| 1.3.6.1.4.1.251.1.1.21.19.1.8 | Columnsbcreconfigure | read-write | mandatory | Re-configure Secondary External |
| 1.3.6.1.4.1.251.1.1.21.20 | TablepCATBitsStatusTable | not-accessible | mandatory | Ds1/E1 Bits Status Table |
| 1.3.6.1.4.1.251.1.1.21.20.1 | RowpCATBitsStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.20.1.1 | ColumnpbsIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.20.1.2 | Columnpbslineok | read-only | mandatory | Is the line OK |
| 1.3.6.1.4.1.251.1.1.21.20.1.3 | ColumnpbsV2RxAIS | read-only | mandatory | Receive DS1 AIS(Blue)Alarm status. |
| 1.3.6.1.4.1.251.1.1.21.20.1.4 | ColumnpbsV2RxLOS | read-only | mandatory | Receive DS1 LOS status. |
| 1.3.6.1.4.1.251.1.1.21.20.1.5 | ColumnpbsV2RxOOF | read-only | mandatory | Receive DS1 OOF status. |
| 1.3.6.1.4.1.251.1.1.21.20.1.6 | ColumnpbsV2RxBER | read-only | mandatory | Receive DS1 BER status. |
| 1.3.6.1.4.1.251.1.1.21.20.1.7 | ColumnpbsV2RxOOFCnt | read-only | mandatory | Receive DS1 OOF count. |
| 1.3.6.1.4.1.251.1.1.21.20.1.8 | ColumnpbsV2RxBERCnt | read-only | mandatory | Receive DS1 BEE count. |
| 1.3.6.1.4.1.251.1.1.21.20.1.9 | ColumnpbsV2RxLOSCnt | read-only | mandatory | Receive DS1 LOS count. |
| 1.3.6.1.4.1.251.1.1.21.20.1.10 | ColumnpbsV2LCVCnt | read-only | mandatory | Receive DS1 LCV count. |
| 1.3.6.1.4.1.251.1.1.21.21 | TablesCATBitsStatusTable | not-accessible | mandatory | Ds1/E1 Bits Status Table |
| 1.3.6.1.4.1.251.1.1.21.21.1 | RowsCATBitsStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.21.1.1 | ColumnsbsIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.21.1.2 | Columnsbslineok | read-only | mandatory | Is the line OK |
| 1.3.6.1.4.1.251.1.1.21.21.1.3 | ColumnsbsV2RxAIS | read-only | mandatory | Receive DS1 AIS(Blue)Alarm status. |
| 1.3.6.1.4.1.251.1.1.21.21.1.4 | ColumnsbsV2RxLOS | read-only | mandatory | Receive DS1 LOS status. |
| 1.3.6.1.4.1.251.1.1.21.21.1.5 | ColumnsbsV2RxOOF | read-only | mandatory | Receive DS1 OOF status. |
| 1.3.6.1.4.1.251.1.1.21.21.1.6 | ColumnsbsV2RxBER | read-only | mandatory | Receive DS1 BER status. |
| 1.3.6.1.4.1.251.1.1.21.21.1.7 | ColumnsbsV2RxOOFCnt | read-only | mandatory | Receive DS1 OOF Counts. |
| 1.3.6.1.4.1.251.1.1.21.21.1.8 | ColumnsbsV2RxBERCnt | read-only | mandatory | Receive DS1 BEE Counts. |
| 1.3.6.1.4.1.251.1.1.21.21.1.9 | ColumnsbsV2RxLOSCnt | read-only | mandatory | Receive DS1/E1 LOS Counts. |
| 1.3.6.1.4.1.251.1.1.21.21.1.10 | ColumnsbsV2LCVCnt | read-only | mandatory | Receive DS1 AIS Counts. |
| 1.3.6.1.4.1.251.1.1.21.22 | TablepCATDerConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.22.1 | RowpCATDerConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.22.1.1 | ColumnpdcIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.22.1.2 | Columnpdcds1V2TxLineLn | read-write | mandatory | Select transmit line length |
| 1.3.6.1.4.1.251.1.1.21.22.1.3 | Columnpdcplaceholder1 | read-write | mandatory | Future Use |
| 1.3.6.1.4.1.251.1.1.21.22.1.4 | ColumnpdcV2FRMRMode | read-write | mandatory | DS1 Framing options. |
| 1.3.6.1.4.1.251.1.1.21.22.1.5 | Columnpdcds1V2Coding | read-write | mandatory | Line Code |
| 1.3.6.1.4.1.251.1.1.21.22.1.6 | ColumnpdcV2Lb | read-write | mandatory | Loopback Selection |
| 1.3.6.1.4.1.251.1.1.21.22.1.7 | Columnpdcclrperf | read-write | mandatory | Clear the performance counters |
| 1.3.6.1.4.1.251.1.1.21.22.1.8 | Columnpdcreconfigure | read-write | mandatory | Re-configure Primary Line |
| 1.3.6.1.4.1.251.1.1.21.23 | TablesCATDerConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.23.1 | RowsCATDerConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.23.1.1 | ColumnsdcIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.23.1.2 | Columnsdcds1V2TxLineLn | read-write | mandatory | Select transmit line length |
| 1.3.6.1.4.1.251.1.1.21.23.1.3 | Columnsdcplaceholder1 | read-write | mandatory | Future Use |
| 1.3.6.1.4.1.251.1.1.21.23.1.4 | ColumnsdcV2FRMRMode | read-write | mandatory | DS1 Framing options. |
| 1.3.6.1.4.1.251.1.1.21.23.1.5 | Columnsdcds1V2Coding | read-write | mandatory | Line Coding |
| 1.3.6.1.4.1.251.1.1.21.23.1.6 | ColumnsdcV2Lb | read-write | mandatory | Loopback Selection DS1 |
| 1.3.6.1.4.1.251.1.1.21.23.1.7 | Columnsdcclrperf | read-write | mandatory | Clear the Performance Counters |
| 1.3.6.1.4.1.251.1.1.21.23.1.8 | Columnsdcreconfigure | read-write | mandatory | Re-configure Secondary Line |
| 1.3.6.1.4.1.251.1.1.21.24 | TablepCATDerStatusTable | not-accessible | mandatory | Ds1/E1 Derived Status Table |
| 1.3.6.1.4.1.251.1.1.21.24.1 | RowpCATDerStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.24.1.1 | ColumnpdsIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.24.1.2 | Columnpdslineok | read-only | mandatory | Is the line OK |
| 1.3.6.1.4.1.251.1.1.21.24.1.3 | ColumnpdsV2TxReference | read-only | mandatory | Transmit Reference Status |
| 1.3.6.1.4.1.251.1.1.21.24.1.4 | ColumnpdsV2RxAIS | read-only | mandatory | Receive DS1 AIS(Blue)Alarm status. |
| 1.3.6.1.4.1.251.1.1.21.24.1.5 | ColumnpdsV2RxLOS | read-only | mandatory | Receive DS1 LOS status. |
| 1.3.6.1.4.1.251.1.1.21.24.1.6 | ColumnpdsV2RxOOF | read-only | mandatory | Receive DS1 OOF status. |
| 1.3.6.1.4.1.251.1.1.21.24.1.7 | ColumnpdsV2RxBER | read-only | mandatory | Receive DS1 BER status. |
| 1.3.6.1.4.1.251.1.1.21.24.1.8 | ColumnpdsV2RxOOFCnt | read-only | mandatory | Receive DS1 OOF count. |
| 1.3.6.1.4.1.251.1.1.21.24.1.9 | ColumnpdsV2RxBERCnt | read-only | mandatory | Receive DS1 BEE count. |
| 1.3.6.1.4.1.251.1.1.21.24.1.10 | ColumnpdsV2RxLOSCnt | read-only | mandatory | Receive DS1 LOS count. |
| 1.3.6.1.4.1.251.1.1.21.24.1.11 | ColumnpdsV2LCVCnt | read-only | mandatory | Receive DS1 AIS count. |
| 1.3.6.1.4.1.251.1.1.21.25 | TablesCATDerStatusTable | not-accessible | mandatory | Ds1/E1 Derived Status Table |
| 1.3.6.1.4.1.251.1.1.21.25.1 | RowsCATDerStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.21.25.1.1 | ColumnsdsIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.251.1.1.21.25.1.2 | Columnsdslineok | read-only | mandatory | Is the line OK |
| 1.3.6.1.4.1.251.1.1.21.25.1.3 | ColumnsdsV2TxReference | read-only | mandatory | Transmit Reference Status |
| 1.3.6.1.4.1.251.1.1.21.25.1.4 | ColumnsdsV2RxAIS | read-only | mandatory | Receive DS1 AIS(Blue)Alarm status. |
| 1.3.6.1.4.1.251.1.1.21.25.1.5 | ColumnsdsV2RxLOS | read-only | mandatory | Receive DS1 LOS status. |
| 1.3.6.1.4.1.251.1.1.21.25.1.6 | ColumnsdsV2RxOOF | read-only | mandatory | Receive DS1 OOF status. |
| 1.3.6.1.4.1.251.1.1.21.25.1.7 | ColumnsdsV2RxBER | read-only | mandatory | Receive DS1 BER status. |
| 1.3.6.1.4.1.251.1.1.21.25.1.8 | ColumnsdsV2RxOOFCnt | read-only | mandatory | Receive DS1 OOF count. |
| 1.3.6.1.4.1.251.1.1.21.25.1.9 | ColumnsdsV2RxBERCnt | read-only | mandatory | Receive DS1 BEE count. |
| 1.3.6.1.4.1.251.1.1.21.25.1.10 | ColumnsdsV2RxLOSCnt | read-only | mandatory | Receive DS1 LOS count. |
| 1.3.6.1.4.1.251.1.1.21.25.1.11 | ColumnsdsV2LCVCnt | read-only | mandatory | Receive DS1 AIS count. |
| 1.3.6.1.4.1.251.1.1.21.26 | ScalarsysClkAlarmErr | read-only | mandatory | Defines the error type for the current clock alarm |
| 1.3.6.1.4.1.251.1.1.22 | NodemjlimSlipLine | |||
| 1.3.6.1.4.1.251.1.1.22 | Nodereset040 | This is sent when a the master processor is reset by operator | ||
| 1.3.6.1.4.1.251.1.1.22.1 | ScalarjpegSlipIp | read-write | mandatory | IP address of SLIP line. |
| 1.3.6.1.4.1.251.1.1.22.2 | ScalarjpegSlipMask | read-write | mandatory | Mask for SLIP line. |
| 1.3.6.1.4.1.251.1.1.22.3 | ScalarjpegSlipRemoteIp | read-write | mandatory | IP address of remote end of SLIP line. |
| 1.3.6.1.4.1.251.1.1.22.4 | ScalarjpegSlipSpeed | read-write | mandatory | Baud rate of SLIP serial line. |
| 1.3.6.1.4.1.251.1.1.23 | NodebadPassword | This is sent when a user enters a bad password | ||
| 1.3.6.1.4.1.251.1.1.23 | NodemjlimSystem | |||
| 1.3.6.1.4.1.251.1.1.23.1 | ScalarlimSysState | read-only | mandatory | M-JPEG LIM System State |
| 1.3.6.1.4.1.251.1.1.23.2 | ScalarlimSysFault | read-only | mandatory | M-JPEG LIM Hardware Fault - front panel lamp |
| 1.3.6.1.4.1.251.1.1.23.3 | ScalarlimSysCompErr | read-only | mandatory | M-JPEG LIM Compression Error - front panel lamp |
| 1.3.6.1.4.1.251.1.1.23.4 | ScalarlimSysDecompErr | read-only | mandatory | M-JPEG LIM Decompression Error - front panel lamp |
| 1.3.6.1.4.1.251.1.1.23.5 | ScalarlimSysVideoIn | read-only | mandatory | M-JPEG LIM Video Input Present - front panel lamp |
| 1.3.6.1.4.1.251.1.1.23.6 | ScalarlimSysVideoOut | read-only | mandatory | M-JPEG LIM Video Output Active - front panel lamp |
| 1.3.6.1.4.1.251.1.1.23.30 | ScalarlimSysStartMode | read-write | mandatory | M-JPEG LIM Default Startup mode |
| 1.3.6.1.4.1.251.1.1.24 | NodevidInCfg | |||
| 1.3.6.1.4.1.251.1.1.24.1 | ScalarvidInJpeg | read-write | mandatory | M-JPEG LIM Video Input JPEG mode |
| 1.3.6.1.4.1.251.1.1.24.2 | ScalarvidInRate | read-write | mandatory | M-JPEG LIM Video Input Channel Bit Rate |
| 1.3.6.1.4.1.251.1.1.24.3 | ScalarvidInProvMode | read-write | mandatory | M-JPEG LIM Video Input Provisioning Mode |
| 1.3.6.1.4.1.251.1.1.24.4 | ScalarvidInFrameRate | read-write | mandatory | M-JPEG LIM Video Input Frame Rate |
| 1.3.6.1.4.1.251.1.1.24.5 | ScalarvidInWindowSize | read-write | mandatory | M-JPEG LIM Video Input Window size |
| 1.3.6.1.4.1.251.1.1.24.6 | ScalarvidInQuanFactor | read-write | mandatory | M-JPEG LIM Video Input Quantization factor |
| 1.3.6.1.4.1.251.1.1.24.7 | ScalarvidInTransMode | read-write | mandatory | M-JPEG LIM Video Input Transmit Mode |
| 1.3.6.1.4.1.251.1.1.24.8 | ScalarvidInStand | read-write | mandatory | M-JPEG LIM Video Input Standard |
| 1.3.6.1.4.1.251.1.1.24.9 | ScalarvidInVcrMode | read-write | mandatory | M-JPEG LIM Video Input VCR mode |
| 1.3.6.1.4.1.251.1.1.24.10 | ScalarvidInAnLpbk | read-write | mandatory | M-JPEG LIM Video Input Analog Loopback |
| 1.3.6.1.4.1.251.1.1.24.11 | ScalarvidInTest | read-write | mandatory | M-JPEG LIM Video Input Test Pattern |
| 1.3.6.1.4.1.251.1.1.25 | NodevidOutCfg | |||
| 1.3.6.1.4.1.251.1.1.25.1 | ScalarvidOutJpeg | read-write | mandatory | M-JPEG LIM Video Output JPEG Mode |
| 1.3.6.1.4.1.251.1.1.25.2 | ScalarvidOutStand | read-write | mandatory | M-JPEG LIM Video Output Standard |
| 1.3.6.1.4.1.251.1.1.25.3 | ScalarvidOutSource | read-write | mandatory | M-JPEG LIM Video Output Timing Source |
| 1.3.6.1.4.1.251.1.1.25.4 | ScalarvidOutUnLpb | read-write | mandatory | M-JPEG LIM Video Output Uncompressed Loopback |
| 1.3.6.1.4.1.251.1.1.25.5 | ScalarvidOutIdleSrc | read-write | mandatory | M-JPEG LIM Video Output Idle Source |
| 1.3.6.1.4.1.251.1.1.25.6 | ScalarvidOutChnlLpbk | read-write | mandatory | M-JPEG LIM Video Output Channel Loopback |
| 1.3.6.1.4.1.251.1.1.26 | NodebillingRecFail | Could not create billing record | ||
| 1.3.6.1.4.1.251.1.1.26 | NodevidInSta | |||
| 1.3.6.1.4.1.251.1.1.26.1 | ScalarvidInState | read-only | mandatory | M-JPEG LIM Video Input State |
| 1.3.6.1.4.1.251.1.1.26.2 | ScalarvidInPres | read-only | mandatory | M-JPEG LIM Video Input Present Indicator |
| 1.3.6.1.4.1.251.1.1.26.3 | ScalarvidInCurQFactor | read-only | mandatory | M-JPEG LIM Video Input Current Quality Factor |
| 1.3.6.1.4.1.251.1.1.26.4 | ScalarvidInCurFrameRate | read-only | mandatory | M-JPEG LIM Video Input Current Frame Rate |
| 1.3.6.1.4.1.251.1.1.26.5 | ScalarvidInAvgBitRate | read-only | mandatory | M-JPEG LIM Video Input Average Bitrate (Mpbs) |
| 1.3.6.1.4.1.251.1.1.26.6 | ScalarvidInPeakBitRate | read-only | mandatory | M-JPEG LIM Video Input Peak Bitrate (Mbps) |
| 1.3.6.1.4.1.251.1.1.26.7 | ScalarvidInSubSample | read-only | mandatory | M-JPEG LIM Video Input Field Subsample Status |
| 1.3.6.1.4.1.251.1.1.26.8 | ScalarvidInCompCnt | read-only | mandatory | M-JPEG LIM Video Input Compressed Packet Count |
| 1.3.6.1.4.1.251.1.1.26.9 | ScalarvidInSkipCnt | read-only | mandatory | M-JPEG LIM Video Input Skipped Packet Count |
| 1.3.6.1.4.1.251.1.1.26.10 | ScalarvidInBuffOvf | read-only | mandatory | M-JPEG LIM Video Input Buffer Controller Overflow Count |
| 1.3.6.1.4.1.251.1.1.26.11 | ScalarvidInImageErr | read-only | mandatory | M-JPEG LIM Video Input JPEG Chip FIFO Overflow |
| 1.3.6.1.4.1.251.1.1.26.12 | ScalarvidInFldSynErr | read-only | mandatory | M-JPEG LIM Video Input Field Synchronization Errors |
| 1.3.6.1.4.1.251.1.1.26.13 | ScalarvidInCompErr | read-only | mandatory | M-JPEG LIM Video Input Compression Errors |
| 1.3.6.1.4.1.251.1.1.26.14 | ScalarvidInBufLevel | read-only | mandatory | M-JPEG LIM Video Input Buffer Fill Level (%) |
| 1.3.6.1.4.1.251.1.1.26.15 | ScalarvidInFailReason | read-only | mandatory | M-JPEG LIM Video Input Fail Reason |
| 1.3.6.1.4.1.251.1.1.27 | NodeclockAlarm | Change in system clock alarm state: declare or clear minor/major alarms, describe error and location, includes primary/secondary clock locations and the active… | ||
| 1.3.6.1.4.1.251.1.1.27 | NodevidOutSta | |||
| 1.3.6.1.4.1.251.1.1.27.1 | ScalarvidOutState | read-only | mandatory | M-JPEG LIM Video Output state |
| 1.3.6.1.4.1.251.1.1.27.2 | ScalarvidOutRate | read-only | mandatory | M-JPEG LIM Video Output Bitrate (Mbps) |
| 1.3.6.1.4.1.251.1.1.27.3 | ScalarvidOutFrameRate | read-only | mandatory | M-JPEG LIM Video Output Frame Rate |
| 1.3.6.1.4.1.251.1.1.27.4 | ScalarvidOutWindowWidth | read-only | mandatory | M-JPEG LIM Video Output Window Width |
| 1.3.6.1.4.1.251.1.1.27.5 | ScalarvidOutWindowHeight | read-only | mandatory | M-JPEG LIM Video Output Window Height |
| 1.3.6.1.4.1.251.1.1.27.6 | ScalarvidOutChnlLock | read-only | mandatory | M-JPEG LIM Video Output Channel Lock Indicator |
| 1.3.6.1.4.1.251.1.1.27.7 | ScalarvidOutPackets | read-only | mandatory | M-JPEG LIM Video Output Packets Received Count |
| 1.3.6.1.4.1.251.1.1.27.8 | ScalarvidOutPlayed | read-only | mandatory | M-JPEG LIM Video Output Packets Played Count |
| 1.3.6.1.4.1.251.1.1.27.9 | ScalarvidOutSkipped | read-only | mandatory | M-JPEG LIM Video Output Skipped Packet Count |
| 1.3.6.1.4.1.251.1.1.27.10 | ScalarvidOutChnlErr | read-only | mandatory | M-JPEG LIM Video Output Channel Error Count |
| 1.3.6.1.4.1.251.1.1.27.11 | ScalarvidOutBuffOvf | read-only | mandatory | M-JPEG LIM Video Output Buffer Controller Overflow Count |
| 1.3.6.1.4.1.251.1.1.27.12 | ScalarvidOutImageErr | read-only | mandatory | M-JPEG LIM Video Output JPEG Chip Error Count |
| 1.3.6.1.4.1.251.1.1.27.13 | ScalarvidOutSeqnoErr | read-only | mandatory | M-JPEG LIM Video Output Packet Sequence Number Error Count |
| 1.3.6.1.4.1.251.1.1.27.14 | ScalarvidOutCurrQFactor | read-only | mandatory | M-JPEG LIM Video Output Current JPEG Quantization Factor |
| 1.3.6.1.4.1.251.1.1.27.15 | ScalarvidOutStdStat | read-only | mandatory | M-JPEG LIM Video Output Standard Status |
| 1.3.6.1.4.1.251.1.1.27.16 | ScalarvidOutBuffLevel | read-only | mandatory | M-JPEG LIM Video Output Buffer Fill Level (%) |
| 1.3.6.1.4.1.251.1.1.27.17 | ScalarvidOutPktsInBuff | read-only | mandatory | M-JPEG LIM Video Output Packets in Buffer |
| 1.3.6.1.4.1.251.1.1.27.18 | ScalarvidOutFailReason | read-only | mandatory | M-JPEG LIM Video Output Fail Reason |
| 1.3.6.1.4.1.251.1.1.27.19 | ScalarvidOutSrcSts | read-only | mandatory | M-JPEG LIM Video Output Timing Source Status |
| 1.3.6.1.4.1.251.1.1.28 | NodeaudInCfg | |||
| 1.3.6.1.4.1.251.1.1.28 | NodespvcInit | Call successfully established | ||
| 1.3.6.1.4.1.251.1.1.28.1 | ScalaraudInLoopBack | read-write | mandatory | M-JPEG LIM Audio Input LoopBack Mode |
| 1.3.6.1.4.1.251.1.1.29 | NodeaudOutCfg | |||
| 1.3.6.1.4.1.251.1.1.29 | NodespvcFail | Call attempt failed | ||
| 1.3.6.1.4.1.251.1.1.29.1 | ScalaraudOutMute | read-write | mandatory | M-JPEG LIM Audio Output Mute Control |
| 1.3.6.1.4.1.251.1.1.29.2 | ScalaraudOutDigLpbk | read-write | mandatory | M-JPEG LIM Audio Digital Loopback |
| 1.3.6.1.4.1.251.1.1.30 | NodeaudInSta | |||
| 1.3.6.1.4.1.251.1.1.30 | NodespvcCallClr | Call cleared after established | ||
| 1.3.6.1.4.1.251.1.1.31 | NodeaudOutSta | |||
| 1.3.6.1.4.1.251.1.1.31 | NodespvcCallReset | Call reset after established | ||
| 1.3.6.1.4.1.251.1.1.31.1 | ScalaraudOutLock | read-only | mandatory | M-JPEG LIM Audio Output Channel Lock Indicator |
| 1.3.6.1.4.1.251.1.1.31.2 | ScalaraudOutMuteStat | read-only | mandatory | M-JPEG LIM Audio Output Mute Status |
| 1.3.6.1.4.1.251.1.1.32 | NodedataCfg | |||
| 1.3.6.1.4.1.251.1.1.32.1 | ScalardataIp | read-write | mandatory | IP address of Data Channel. |
| 1.3.6.1.4.1.251.1.1.32.2 | ScalardataMask | read-write | mandatory | Network Mask for Data Channel. |
| 1.3.6.1.4.1.251.1.1.32.3 | ScalardataRemoteIp | read-write | mandatory | IP address of remote end of Data Channel. |
| 1.3.6.1.4.1.251.1.1.33 | NodedataSta | |||
| 1.3.6.1.4.1.251.1.1.33 | NodespvcRetryExceeded | Call attempts exceeded retry limit | ||
| 1.3.6.1.4.1.251.1.1.34 | NodemjlimControl | |||
| 1.3.6.1.4.1.251.1.1.34.1 | ScalarsendFileSel | read-write | mandatory | File to send |
| 1.3.6.1.4.1.251.1.1.34.2 | ScalarjpegCurrentFile | read-only | mandatory | File being sent |
| 1.3.6.1.4.1.251.1.1.34.3 | ScalarsendFileStat | read-only | mandatory | Status of file send |
| 1.3.6.1.4.1.251.1.1.34.4 | ScalarsendFileBytes | read-only | mandatory | Bytes sent |
| 1.3.6.1.4.1.251.1.1.34.20 | ScalarjpegReset | read-write | mandatory | Hard/Soft Reset |
| 1.3.6.1.4.1.251.1.1.34.21 | ScalarjpegSaveCfg | read-write | mandatory | Save Configuration |
| 1.3.6.1.4.1.251.1.1.34.22 | ScalarjpegLoadCfg | read-write | mandatory | Load Configuration |
| 1.3.6.1.4.1.251.1.1.34.40 | ScalarjpegSWRev | read-only | mandatory | JPEG Code Revision |
| 1.3.6.1.4.1.251.1.1.35 | Nodedv2PDH | |||
| 1.3.6.1.4.1.251.1.1.35.1 | TablepdhPLCPTable | not-accessible | mandatory | This table is used for PLCP configuration and status |
| 1.3.6.1.4.1.251.1.1.35.1.1 | RowpdhPLCPEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.35.1.1.1 | ColumnpdhPLCPLinkNo | read-only | mandatory | Link Number |
| 1.3.6.1.4.1.251.1.1.35.1.1.2 | ColumnpdhPLCPLinkEnable | read-write | mandatory | Enable/Disable Link |
| 1.3.6.1.4.1.251.1.1.35.1.1.3 | ColumnpdhPLCPLinkStatusAffect | read-write | mandatory | Link Status affect on receiving/transmitting |
| 1.3.6.1.4.1.251.1.1.35.1.1.4 | ColumnpdhPLCPLinkState | read-only | mandatory | Current Link State |
| 1.3.6.1.4.1.251.1.1.35.1.1.5 | ColumnpdhPLCPPhyMode | read-write | mandatory | The physical framing for link |
| 1.3.6.1.4.1.251.1.1.35.1.1.6 | ColumnpdhPLCPMode | read-write | mandatory | The PLCP mode for link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.7 | ColumnpdhPLCPScrambler | read-write | mandatory | Enable/Disable scrambling |
| 1.3.6.1.4.1.251.1.1.35.1.1.8 | ColumnpdhPLCP0x55 | read-write | mandatory | Enable/Disable XORing HCS with 0x55 |
| 1.3.6.1.4.1.251.1.1.35.1.1.9 | ColumnpdhPLCPSmdsMode | read-write | mandatory | Enable/Disable SMDS mode |
| 1.3.6.1.4.1.251.1.1.35.1.1.10 | ColumnpdhPLCPIdleCell | read-write | mandatory | Idle Cell Header Contents |
| 1.3.6.1.4.1.251.1.1.35.1.1.11 | ColumnpdhPLCPLoopback | read-write | mandatory | PLCP Loopback |
| 1.3.6.1.4.1.251.1.1.35.1.1.12 | ColumnpdhPLCPClear | read-write | mandatory | Clear PLCP counts |
| 1.3.6.1.4.1.251.1.1.35.1.1.13 | ColumnpdhPLCPReconfig | read-write | mandatory | Reconfigure link |
| 1.3.6.1.4.1.251.1.1.35.1.1.14 | ColumnpdhPLCPLpbkTimeout | read-write | mandatory | This parameter is used to set the loopback timeout in minutes. |
| 1.3.6.1.4.1.251.1.1.35.1.1.32 | ColumnpdhPLCPChipType | read-only | mandatory | PDH Chip Type |
| 1.3.6.1.4.1.251.1.1.35.1.1.33 | ColumnpdhPLCPTXclock | read-only | mandatory | The state of TX clock for this link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.34 | ColumnpdhPLCPRXclock | read-only | mandatory | The state of RX clock for this link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.35 | ColumnpdhPLCPTXCells | read-only | mandatory | The transmit cells count for this link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.36 | ColumnpdhPLCPRXCells | read-only | mandatory | The receive cells count for this link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.37 | ColumnpdhPLCPHCSErrs | read-only | mandatory | The header checksum error count for this link. |
| 1.3.6.1.4.1.251.1.1.35.1.1.43 | ColumnpdhPLCPLOCDDefect | read-only | mandatory | Loss of cell delineation Defect |
| 1.3.6.1.4.1.251.1.1.35.1.1.44 | ColumnpdhPLCPYellowDefect | read-only | mandatory | PLCP Yellow Defect |
| 1.3.6.1.4.1.251.1.1.35.1.1.45 | ColumnpdhPLCPLOFDefect | read-only | mandatory | PLCP Loss Of Frame Defect |
| 1.3.6.1.4.1.251.1.1.35.1.1.49 | ColumnpdhPLCPLOCDAlarm | read-only | mandatory | Loss of cell delineation Alarm |
| 1.3.6.1.4.1.251.1.1.35.1.1.50 | ColumnpdhPLCPYellowAlarm | read-only | mandatory | PLCP Yellow Alarm |
| 1.3.6.1.4.1.251.1.1.35.1.1.51 | ColumnpdhPLCPLOFAlarm | read-only | mandatory | PLCP Loss Of Frame Alarm |
| 1.3.6.1.4.1.251.1.1.35.1.1.56 | ColumnpdhPLCPFrameErrs | read-only | mandatory | Number of PLCP frame errors |
| 1.3.6.1.4.1.251.1.1.35.1.1.57 | ColumnpdhPLCPBIP8Errs | read-only | mandatory | Number of PLCP BIP-8 errors |
| 1.3.6.1.4.1.251.1.1.35.1.1.58 | ColumnpdhPLCPFEBEErrs | read-only | mandatory | Number of PLCP FEBE errors |
| 1.3.6.1.4.1.251.1.1.35.1.1.63 | ColumnpdhPLCPES | read-only | mandatory | PLCP Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.1.1.64 | ColumnpdhPLCPSES | read-only | mandatory | PLCP Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.1.1.65 | ColumnpdhPLCPUAS | read-only | mandatory | PLCP Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.35.1.1.66 | ColumnpdhPLCPFEES | read-only | mandatory | PLCP Far End Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.1.1.67 | ColumnpdhPLCPFESES | read-only | mandatory | PLCP Far End Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.1.1.68 | ColumnpdhPLCPFEUAS | read-only | mandatory | PLCP Far End Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.35.2 | TablepdhDS3Table | not-accessible | mandatory | This table is used for DS3 config/status supplied by the PLPP chip |
| 1.3.6.1.4.1.251.1.1.35.2.1 | RowpdhDS3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.35.2.1.1 | ColumnpdhDS3TableValid | read-only | mandatory | Indicates if table is valid for configured LIM |
| 1.3.6.1.4.1.251.1.1.35.2.1.2 | ColumnpdhDS3LinkNo | read-only | mandatory | Link Number |
| 1.3.6.1.4.1.251.1.1.35.2.1.3 | ColumnpdhDS3Framer | read-write | mandatory | DS3 framer mode |
| 1.3.6.1.4.1.251.1.1.35.2.1.4 | ColumnpdhDS3TxAIS | read-write | mandatory | Transmit AIS |
| 1.3.6.1.4.1.251.1.1.35.2.1.5 | ColumnpdhDS3Clear | read-write | mandatory | Clear Button for Counters |
| 1.3.6.1.4.1.251.1.1.35.2.1.6 | ColumnpdhDS3Reconfig | read-write | mandatory | Reconfigure link |
| 1.3.6.1.4.1.251.1.1.35.2.1.26 | ColumnpdhDS3RxFrmFmt | read-only | mandatory | Receive framing format |
| 1.3.6.1.4.1.251.1.1.35.2.1.27 | ColumnpdhDS3RxIDL | read-only | mandatory | Receive IDLE status |
| 1.3.6.1.4.1.251.1.1.35.2.1.28 | ColumnpdhDS3FEACTxmt | read-only | mandatory | Code that has been transmitted as a FEAC. |
| 1.3.6.1.4.1.251.1.1.35.2.1.33 | ColumnpdhDS3Lcvs | read-only | mandatory | DS3 Line Code Violation count |
| 1.3.6.1.4.1.251.1.1.35.2.1.34 | ColumnpdhDS3FrameErrs | read-only | mandatory | DS3 frame error count |
| 1.3.6.1.4.1.251.1.1.35.2.1.35 | ColumnpdhDS3ParityErrs | read-only | mandatory | DS3 parity error count |
| 1.3.6.1.4.1.251.1.1.35.2.1.36 | ColumnpdhDS3CbitPrtyErrs | read-only | mandatory | DS3 C-bit parity error count |
| 1.3.6.1.4.1.251.1.1.35.2.1.37 | ColumnpdhDS3FEBEErrs | read-only | mandatory | DS3 FEBE error count |
| 1.3.6.1.4.1.251.1.1.35.2.1.43 | ColumnpdhDS3LOSDefect | read-only | mandatory | DS3 Loss of Signal Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.44 | ColumnpdhDS3OOFDefect | read-only | mandatory | DS3 Out of Frame Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.45 | ColumnpdhDS3AISDefect | read-only | mandatory | Receive DS3 AIS Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.46 | ColumnpdhDS3YellowDefect | read-only | mandatory | DS3 Yellow Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.47 | ColumnpdhDS3ExBERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.53 | ColumnpdhDS3LOSAlarm | read-only | mandatory | DS3 Loss of Signal Alarm |
| 1.3.6.1.4.1.251.1.1.35.2.1.54 | ColumnpdhDS3LOFAlarm | read-only | mandatory | DS3 Loss of Frame Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.55 | ColumnpdhDS3AISAlarm | read-only | mandatory | Receive DS3 AIS Defect |
| 1.3.6.1.4.1.251.1.1.35.2.1.56 | ColumnpdhDS3YellowAlarm | read-only | mandatory | DS3 Yellow Alarm |
| 1.3.6.1.4.1.251.1.1.35.2.1.57 | ColumnpdhDS3ExBERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.35.2.1.63 | ColumnpdhDS3LES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.64 | ColumnpdhDS3LSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.65 | ColumnpdhDS3ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.66 | ColumnpdhDS3ES2 | read-only | mandatory | Secondary Errored Seconds (C-bit mode only) |
| 1.3.6.1.4.1.251.1.1.35.2.1.67 | ColumnpdhDS3SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.68 | ColumnpdhDS3SES2 | read-only | mandatory | Secondary Severely Errored Seconds (C-bit mode only) |
| 1.3.6.1.4.1.251.1.1.35.2.1.69 | ColumnpdhDS3AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.70 | ColumnpdhDS3UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.71 | ColumnpdhDS3FarEndES | read-only | mandatory | Far End Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.72 | ColumnpdhDS3FarEndSES | read-only | mandatory | Far End Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.2.1.73 | ColumnpdhDS3FarEndUAS | read-only | mandatory | Far End Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.35.3 | TablepdhE3Table | not-accessible | mandatory | This table is used for E3 config/status supplied by the PLPP chip |
| 1.3.6.1.4.1.251.1.1.35.3.1 | RowpdhE3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.35.3.1.1 | ColumnpdhE3TableValid | read-only | mandatory | Indicates if table is valid for configured LIM |
| 1.3.6.1.4.1.251.1.1.35.3.1.2 | ColumnpdhE3LinkNo | read-only | mandatory | Link Number |
| 1.3.6.1.4.1.251.1.1.35.3.1.3 | ColumnpdhE3Framer | read-write | mandatory | E3 framer mode |
| 1.3.6.1.4.1.251.1.1.35.3.1.4 | ColumnpdhE3Clear | read-write | mandatory | Clear Button for Counters |
| 1.3.6.1.4.1.251.1.1.35.3.1.5 | ColumnpdhE3Reconfig | read-write | mandatory | Reconfigure link |
| 1.3.6.1.4.1.251.1.1.35.3.1.6 | ColumnpdhE3TxmtTimMk | read-write | mandatory | Set to yes(1) if traceable to primary ref clk. |
| 1.3.6.1.4.1.251.1.1.35.3.1.7 | ColumnpdhE3PloadTypeLab | read-write | mandatory | Payload type label. |
| 1.3.6.1.4.1.251.1.1.35.3.1.8 | ColumnpdhE3TxTrlTrcIdLen | read-write | mandatory | Trail trace length for transmit and expected receive. |
| 1.3.6.1.4.1.251.1.1.35.3.1.9 | ColumnpdhE3TxTrcIdUH | read-write | mandatory | Transmit trail trace ID upper half. |
| 1.3.6.1.4.1.251.1.1.35.3.1.10 | ColumnpdhE3TxTrcIdLH | read-write | mandatory | Transmit trail trace ID lower half. |
| 1.3.6.1.4.1.251.1.1.35.3.1.11 | ColumnpdhE3RxExTrcIdUH | read-write | mandatory | Receive expected trail trace ID upper half. |
| 1.3.6.1.4.1.251.1.1.35.3.1.12 | ColumnpdhE3RxExTrcIdLH | read-write | mandatory | Receive expected trail trace ID lower half. |
| 1.3.6.1.4.1.251.1.1.35.3.1.32 | ColumnpdhE3FrameErrs | read-only | mandatory | E3 frame error count |
| 1.3.6.1.4.1.251.1.1.35.3.1.33 | ColumnpdhE3Lcvs | read-only | mandatory | E3 Line Code Violation count |
| 1.3.6.1.4.1.251.1.1.35.3.1.34 | ColumnpdhE3ParityErrs | read-only | mandatory | E3-G832 parity error count |
| 1.3.6.1.4.1.251.1.1.35.3.1.35 | ColumnpdhE3FEBEErrs | read-only | mandatory | E3-G832 FEBE error count |
| 1.3.6.1.4.1.251.1.1.35.3.1.41 | ColumnpdhE3LOSDefect | read-only | mandatory | LOS Defect |
| 1.3.6.1.4.1.251.1.1.35.3.1.42 | ColumnpdhE3OOFDefect | read-only | mandatory | LOF Defect |
| 1.3.6.1.4.1.251.1.1.35.3.1.43 | ColumnpdhE3AISDefect | read-only | mandatory | AIS Defect |
| 1.3.6.1.4.1.251.1.1.35.3.1.44 | ColumnpdhE3FERFDefect | read-only | mandatory | FERF Defect |
| 1.3.6.1.4.1.251.1.1.35.3.1.45 | ColumnpdhE3ExBERDefect | read-only | mandatory | Excessive Bit Error Rate Defect |
| 1.3.6.1.4.1.251.1.1.35.3.1.51 | ColumnpdhE3LOSAlarm | read-only | mandatory | LOS Alarm |
| 1.3.6.1.4.1.251.1.1.35.3.1.52 | ColumnpdhE3LOFAlarm | read-only | mandatory | LOF Alarm |
| 1.3.6.1.4.1.251.1.1.35.3.1.53 | ColumnpdhE3AISAlarm | read-only | mandatory | AIS Alarm |
| 1.3.6.1.4.1.251.1.1.35.3.1.54 | ColumnpdhE3FERFAlarm | read-only | mandatory | FERF Alarm |
| 1.3.6.1.4.1.251.1.1.35.3.1.55 | ColumnpdhE3ExBERAlarm | read-only | mandatory | Excessive Bit Error Rate Alarm |
| 1.3.6.1.4.1.251.1.1.35.3.1.61 | ColumnpdhE3LES | read-only | mandatory | Line Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.62 | ColumnpdhE3LSES | read-only | mandatory | Line Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.63 | ColumnpdhE3ES | read-only | mandatory | Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.64 | ColumnpdhE3SES | read-only | mandatory | Severely Errored Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.65 | ColumnpdhE3AISS | read-only | mandatory | AIS Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.66 | ColumnpdhE3UAS | read-only | mandatory | Unavailable Seconds |
| 1.3.6.1.4.1.251.1.1.35.3.1.76 | ColumnpdhE3RxTrlTrc | read-only | mandatory | Last received trail trace message. |
| 1.3.6.1.4.1.251.1.1.35.3.1.77 | ColumnpdhE3RxTrIdMis | read-only | mandatory | Receive trace id mismatch indication. |
| 1.3.6.1.4.1.251.1.1.35.3.1.78 | ColumnpdhE3RxTrIdUnst | read-only | mandatory | Receive trace id unstable indication. |
| 1.3.6.1.4.1.251.1.1.35.3.1.79 | ColumnpdhE3RxPloadTypeLabMis | read-only | mandatory | Receive payload type label mismatch indication. |
| 1.3.6.1.4.1.251.1.1.35.3.1.80 | ColumnpdhE3RxPloadTypeLabUnst | read-only | mandatory | Receive payload type label unstable indication. |
| 1.3.6.1.4.1.251.1.1.36 | Nodedv2Oam | |||
| 1.3.6.1.4.1.251.1.1.36.1 | TableoamTable | not-accessible | mandatory | This table is used for per-port OAM configuration. |
| 1.3.6.1.4.1.251.1.1.36.1.1 | RowoamEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.36.1.1.1 | ColumnoamLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.1.1.2 | ColumnoamSegEndPoint | read-write | mandatory | Set to yes(1) to configure the link as segment end point. |
| 1.3.6.1.4.1.251.1.1.36.1.1.3 | ColumnoamVcEndPoint | read-write | mandatory | Set to yes(1) to configure the link as connection end point. |
| 1.3.6.1.4.1.251.1.1.36.1.1.4 | ColumnoamAisRdiGeneration | read-write | mandatory | Set to yes(1) to generate AIS/RDI up on physical failure. |
| 1.3.6.1.4.1.251.1.1.36.1.1.5 | ColumnoamLastRxType | read-only | mandatory | Type of the last received OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.6 | ColumnoamLastRxVpi | read-only | mandatory | VPI value of the last received OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.7 | ColumnoamLastRxVci | read-only | mandatory | VCI value of the last received OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.8 | ColumnoamRxCount | read-only | mandatory | Sum of received OAM cells. |
| 1.3.6.1.4.1.251.1.1.36.1.1.9 | ColumnoamLastTxType | read-only | mandatory | Type of the last transmitted OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.10 | ColumnoamLastTxVpi | read-only | mandatory | VPI value of the last transmitted OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.11 | ColumnoamLastTxVci | read-only | mandatory | VCI value of the last transmitted OAM cell. |
| 1.3.6.1.4.1.251.1.1.36.1.1.12 | ColumnoamTxCount | read-only | mandatory | Sum of transmitted OAM cells. |
| 1.3.6.1.4.1.251.1.1.36.1.1.13 | ColumnoamClearStats | read-write | mandatory | Set to yes(2) to clear OAM Tx and Rx Statistics. |
| 1.3.6.1.4.1.251.1.1.36.2 | TableoamLoopbackTable | not-accessible | mandatory | This table is used to configure and control loopback test. Change Test Status to Start Test(1) to initiate loopback test. |
| 1.3.6.1.4.1.251.1.1.36.2.1 | RowoamLoopbackEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.36.2.1.1 | ColumnoamLoopbackLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.2.1.2 | ColumnoamLoopbackVpi | read-write | mandatory | VPI value for the loopback cells to send. |
| 1.3.6.1.4.1.251.1.1.36.2.1.3 | ColumnoamLoopbackVci | read-write | mandatory | VCI value for the loopback cells to send. |
| 1.3.6.1.4.1.251.1.1.36.2.1.4 | ColumnoamLoopbackSpan | read-write | mandatory | Flow span for the loopback cells to send. |
| 1.3.6.1.4.1.251.1.1.36.2.1.5 | ColumnoamLoopbackMaxNumCells | read-write | mandatory | Maximum number of loopback cells to send. |
| 1.3.6.1.4.1.251.1.1.36.2.1.6 | ColumnoamLoopbackNumCellsSent | read-only | mandatory | Number of loopback cells sent. |
| 1.3.6.1.4.1.251.1.1.36.2.1.7 | ColumnoamLoopbackTimeOut | read-write | mandatory | Number of seconds to wait for loopback cells to return. |
| 1.3.6.1.4.1.251.1.1.36.2.1.8 | ColumnoamLoopbackActive | read-write | mandatory | Change to Start Test to run loopback test. |
| 1.3.6.1.4.1.251.1.1.36.2.1.9 | ColumnoamLoopbackResult | read-only | mandatory | Loopback test result. |
| 1.3.6.1.4.1.251.1.1.36.2.1.10 | ColumnoamLoopbackLocId | read-write | mandatory | Location Node ID for loopback point. |
| 1.3.6.1.4.1.251.1.1.36.3 | ScalaroamDisable | read-write | mandatory | yes(2) will disable the oam for entire slot. |
| 1.3.6.1.4.1.251.1.1.36.4 | TableoamVcaTable | not-accessible | mandatory | This table is used for per-port OAM configuration. |
| 1.3.6.1.4.1.251.1.1.36.4.1 | RowoamVcaEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.36.4.1.1 | ColumnoamVcaVpi | read-only | mandatory | The VPI for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.4.1.2 | ColumnoamVcaVci | read-only | mandatory | The VCI for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.4.1.3 | ColumnoamVcaConnectionType | read-write | mandatory | Set End point configuration on hardware per VPC/VCC |
| 1.3.6.1.4.1.251.1.1.36.4.1.4 | ColumnoamVcaVpcEndPoint | read-write | mandatory | Set yes(1) to configure the VC to VPC end point. |
| 1.3.6.1.4.1.251.1.1.36.4.1.5 | ColumnoamVcaAisRdiGeneration | read-write | mandatory | AIS/RDI disable or enable with or without traps. |
| 1.3.6.1.4.1.251.1.1.36.4.1.6 | ColumnoamVcaAisRdiState | read-only | mandatory | AIS/RDI state for this VP/VC. |
| 1.3.6.1.4.1.251.1.1.36.4.1.7 | ColumnoamVcaDefectType | read-only | mandatory | AIS/RDI defect type. |
| 1.3.6.1.4.1.251.1.1.36.4.1.8 | ColumnoamVcaDefectNode | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.4.1.9 | ColumnoamVcaDefectSlot | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.4.1.10 | ColumnoamVcaDefectLink | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.4.1.11 | ColumnoamVcaTrapEnable | read-write | mandatory | Set enable to generate trap when AIS/RDI received. |
| 1.3.6.1.4.1.251.1.1.36.4.1.12 | ColumnoamVcaCC | read-write | mandatory | Activate segment or end to end Continuity Checks. |
| 1.3.6.1.4.1.251.1.1.36.4.1.13 | ColumnoamVcaCCState | read-only | mandatory | Continuity Check state. |
| 1.3.6.1.4.1.251.1.1.36.4.1.14 | ColumnoamVcaPM | read-write | mandatory | Activate segment or end to end Performance Monitoring. |
| 1.3.6.1.4.1.251.1.1.36.4.1.15 | ColumnoamVcaPMBlockSize | read-write | mandatory | Performance Monitoring block size. |
| 1.3.6.1.4.1.251.1.1.36.4.1.16 | ColumnoamVcaPMState | read-only | mandatory | Continuity Check state. |
| 1.3.6.1.4.1.251.1.1.36.4.1.17 | ColumnoamVcaBkwRptLosCells | read-only | mandatory | Backward Reporting loss of cell. |
| 1.3.6.1.4.1.251.1.1.36.4.1.18 | ColumnoamVcaBkwRptMisCells | read-only | mandatory | Backward Reporting misinserted cell. |
| 1.3.6.1.4.1.251.1.1.36.4.1.19 | ColumnoamVcaBkwRptBip16 | read-only | mandatory | Backward Reporting BIP-16 violations. |
| 1.3.6.1.4.1.251.1.1.36.4.1.20 | ColumnoamVcaBkwRptSevErr | read-only | mandatory | Backward Reporting Severly Errored Cells. |
| 1.3.6.1.4.1.251.1.1.36.5 | TableoamVcbTable | not-accessible | mandatory | This table is used for per-port OAM configuration. |
| 1.3.6.1.4.1.251.1.1.36.5.1 | RowoamVcbEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.36.5.1.1 | ColumnoamVcbVpi | read-only | mandatory | The VPI for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.5.1.2 | ColumnoamVcbVci | read-only | mandatory | The VCI for this configuration. |
| 1.3.6.1.4.1.251.1.1.36.5.1.3 | ColumnoamVcbConnectionType | read-write | mandatory | Set End point configuration on hardware per VPC/VCC |
| 1.3.6.1.4.1.251.1.1.36.5.1.4 | ColumnoamVcbVpcEndPoint | read-write | mandatory | Set yes(1) to configure the VC to VPC end point. |
| 1.3.6.1.4.1.251.1.1.36.5.1.5 | ColumnoamVcbAisRdiGeneration | read-write | mandatory | AIS/RDI disable or enable with or without traps. |
| 1.3.6.1.4.1.251.1.1.36.5.1.6 | ColumnoamVcbAisRdiState | read-only | mandatory | AIS/RDI state for this VP/VC. |
| 1.3.6.1.4.1.251.1.1.36.5.1.7 | ColumnoamVcbDefectType | read-only | mandatory | AIS/RDI defect type. |
| 1.3.6.1.4.1.251.1.1.36.5.1.8 | ColumnoamVcbDefectNode | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.5.1.9 | ColumnoamVcbDefectSlot | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.5.1.10 | ColumnoamVcbDefectLink | read-only | mandatory | AIS/RDI location. |
| 1.3.6.1.4.1.251.1.1.36.5.1.11 | ColumnoamVcbTrapEnable | read-write | mandatory | Set enable to generate trap when AIS/RDI received. |
| 1.3.6.1.4.1.251.1.1.36.5.1.12 | ColumnoamVcbCC | read-write | mandatory | Activate segment or end to end Continuity Checks. |
| 1.3.6.1.4.1.251.1.1.36.5.1.13 | ColumnoamVcbCCState | read-only | mandatory | Continuity Check state. |
| 1.3.6.1.4.1.251.1.1.36.5.1.14 | ColumnoamVcbPM | read-write | mandatory | Activate segment or end to end Performance Monitoring. |
| 1.3.6.1.4.1.251.1.1.36.5.1.15 | ColumnoamVcbPMBlockSize | read-write | mandatory | Performance Monitoring block size. |
| 1.3.6.1.4.1.251.1.1.36.5.1.16 | ColumnoamVcbPMState | read-only | mandatory | Continuity Check state. |
| 1.3.6.1.4.1.251.1.1.36.5.1.17 | ColumnoamVcbBkwRptLosCells | read-only | mandatory | Backward Reporting loss of cell. |
| 1.3.6.1.4.1.251.1.1.36.5.1.18 | ColumnoamVcbBkwRptMisCells | read-only | mandatory | Backward Reporting misinserted cell. |
| 1.3.6.1.4.1.251.1.1.36.5.1.19 | ColumnoamVcbBkwRptBip16 | read-only | mandatory | Backward Reporting BIP-16 violations. |
| 1.3.6.1.4.1.251.1.1.36.5.1.20 | ColumnoamVcbBkwRptSevErr | read-only | mandatory | Backward Reporting Severly Errored Cells. |
| 1.3.6.1.4.1.251.1.1.37 | Nodedv2Lmi | |||
| 1.3.6.1.4.1.251.1.1.37.1 | TablelmiTable | not-accessible | mandatory | This table is used to control ILMI configuration. |
| 1.3.6.1.4.1.251.1.1.37.1.1 | RowlmiEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.37.1.1.1 | ColumnlmiLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.37.1.1.2 | ColumnlmiVpi | read-write | mandatory | The VPI used for ILMI. |
| 1.3.6.1.4.1.251.1.1.37.1.1.3 | ColumnlmiVci | read-write | mandatory | The VCI used for ILMI. |
| 1.3.6.1.4.1.251.1.1.37.1.1.4 | ColumnlmiType | read-write | mandatory | Set to network side (1) to configure the link as network side ILMI. |
| 1.3.6.1.4.1.251.1.1.37.1.1.5 | ColumnlmiState | read-only | mandatory | The state of ILMI for this link. |
| 1.3.6.1.4.1.251.1.1.37.1.1.6 | ColumnlmiFormat | read-write | mandatory | ILMI address format. |
| 1.3.6.1.4.1.251.1.1.37.1.1.7 | ColumnlmiPrefix | read-only | mandatory | Default Network prefix to use. |
| 1.3.6.1.4.1.251.1.1.37.1.1.8 | ColumnlmiOnOff | read-write | mandatory | Turn on/off ILMI. |
| 1.3.6.1.4.1.251.1.1.37.1.1.9 | ColumnlmiPollPeriod | read-write | mandatory | Period in seconds to send polling request for link management. |
| 1.3.6.1.4.1.251.1.1.37.1.1.10 | ColumnlmiNoRspDown | read-write | mandatory | Number of failed polls (no response) before declaration of link down. |
| 1.3.6.1.4.1.251.1.1.37.1.1.11 | ColumnlmiLinkMgmt | read-write | mandatory | Turn on/off link management. |
| 1.3.6.1.4.1.251.1.1.37.1.1.12 | ColumnlmiConnectivity | read-only | mandatory | ATM interface status. |
| 1.3.6.1.4.1.251.1.1.37.1.1.13 | ColumnlmiPrefixMod | read-write | mandatory | Modifiable Network prefix to use. MUST BE 26 DIGITS |
| 1.3.6.1.4.1.251.1.1.37.1.1.14 | ColumnlmiEsi | read-write | mandatory | ESI field to use on User side. MUST BE 12 DIGITS |
| 1.3.6.1.4.1.251.1.1.37.2 | TablelmiNetSideTable | not-accessible | mandatory | This table is used to configure and control network side ILMI. |
| 1.3.6.1.4.1.251.1.1.37.2.1 | RowlmiNetSideEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.37.2.1.1 | ColumnlmiNetSideLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.37.2.1.2 | ColumnlmiNetSidePrefixId | read-only | mandatory | Network prefix identification number. |
| 1.3.6.1.4.1.251.1.1.37.2.1.3 | ColumnlmiNetSidePrefix | read-only | mandatory | Network prefix to register or de-register. |
| 1.3.6.1.4.1.251.1.1.37.2.1.4 | ColumnlmiNetSidePrefixStatus | read-only | mandatory | Set to register to send the prefix to the user side; set to de-register to remove the prefix from the user side. |
| 1.3.6.1.4.1.251.1.1.37.3 | TablelmiUserSideTable | not-accessible | mandatory | This table is used to configure and control user side ILMI. |
| 1.3.6.1.4.1.251.1.1.37.3.1 | RowlmiUserSideEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.37.3.1.1 | ColumnlmiUserSideLinkNo | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.37.3.1.2 | ColumnlmiUserSideAddressId | read-only | mandatory | The link number for this configuration. |
| 1.3.6.1.4.1.251.1.1.37.3.1.3 | ColumnlmiUserSideAddress | read-only | mandatory | ATM address to register or de-register. |
| 1.3.6.1.4.1.251.1.1.37.3.1.4 | ColumnlmiUserSideAddressStatus | read-only | mandatory | Set to valid to register the address to the network side; set to invalid to de-register the address from the network side. |
| 1.3.6.1.4.1.251.1.1.38 | Nodedv2AlarmHandler | |||
| 1.3.6.1.4.1.251.1.1.38.1 | ScalaralarmNodeCrit | read-only | mandatory | Node Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.2 | ScalaralarmNodeMajor | read-only | mandatory | Node Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.3 | ScalaralarmNodeMinor | read-only | mandatory | Node Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4 | TablealarmStatTable | not-accessible | mandatory | This table is used for Alarm Handler status |
| 1.3.6.1.4.1.251.1.1.38.4.1 | RowalarmStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.38.4.1.1 | ColumnalrStatSlotNo | read-only | mandatory | Slot Number |
| 1.3.6.1.4.1.251.1.1.38.4.1.2 | ColumnslotCritStatus | read-only | mandatory | Slot Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.3 | ColumnslotMajorStatus | read-only | mandatory | Slot Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.4 | ColumnslotMinorStatus | read-only | mandatory | Slot Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.5 | Columnlink0CritStatus | read-only | mandatory | Link 0 Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.6 | Columnlink0MajorStatus | read-only | mandatory | Link 0 Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.7 | Columnlink0MinorStatus | read-only | mandatory | Link 0 Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.8 | Columnlink1CritStatus | read-only | mandatory | Link 1 Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.9 | Columnlink1MajorStatus | read-only | mandatory | Link 1 Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.10 | Columnlink1MinorStatus | read-only | mandatory | Link 1 Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.11 | Columnlink2CritStatus | read-only | mandatory | Link 2 Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.12 | Columnlink2MajorStatus | read-only | mandatory | Link 2 Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.13 | Columnlink2MinorStatus | read-only | mandatory | Link 2 Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.14 | Columnlink3CritStatus | read-only | mandatory | Link 3 Critical Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.15 | Columnlink3MajorStatus | read-only | mandatory | Link 3 Major Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.4.1.16 | Columnlink3MinorStatus | read-only | mandatory | Link 3 Minor Alarm Status |
| 1.3.6.1.4.1.251.1.1.38.5 | ScalaralarmNodeACO | read-write | mandatory | Node ACO Status |
| 1.3.6.1.4.1.251.1.1.38.6 | TablealarmACOTable | not-accessible | mandatory | This table is used for the Alarm Handler ACO |
| 1.3.6.1.4.1.251.1.1.38.6.1 | RowalarmACOEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.38.6.1.1 | ColumnalrACOslotNo | read-only | mandatory | Slot Number |
| 1.3.6.1.4.1.251.1.1.38.6.1.2 | ColumnalrACOslotACO | read-write | mandatory | Slot ACO Status |
| 1.3.6.1.4.1.251.1.1.38.6.1.3 | ColumnalrACOlink0ACO | read-write | mandatory | Link 0 ACO Status |
| 1.3.6.1.4.1.251.1.1.38.6.1.4 | ColumnalrACOlink1ACO | read-write | mandatory | Link 1 ACO Status |
| 1.3.6.1.4.1.251.1.1.38.6.1.5 | ColumnalrACOlink2ACO | read-write | mandatory | Link 2 ACO Status |
| 1.3.6.1.4.1.251.1.1.38.6.1.6 | ColumnalrACOlink3ACO | read-write | mandatory | Link 3 ACO Status |
| 1.3.6.1.4.1.251.1.1.38.7 | TableuserStatusTable | not-accessible | mandatory | This table is used for the User Status Inputs |
| 1.3.6.1.4.1.251.1.1.38.7.1 | RowuserStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.38.7.1.1 | ColumnuserInputNo | read-only | mandatory | User Status Input Number |
| 1.3.6.1.4.1.251.1.1.38.7.1.2 | ColumnuserInputEnable | read-write | mandatory | Enable User Status Input |
| 1.3.6.1.4.1.251.1.1.38.7.1.3 | ColumnuserInputTrapEnable | read-write | mandatory | Enable User Defined Trap/Event |
| 1.3.6.1.4.1.251.1.1.38.7.1.4 | ColumnuserInputTrapDesc | read-write | mandatory | Description string for trap/event |
| 1.3.6.1.4.1.251.1.1.38.7.1.5 | ColumnuserInputActiveState | read-write | mandatory | Alarm active state of user input relay switch |
| 1.3.6.1.4.1.251.1.1.38.7.1.10 | ColumnuserInputAlrClass | read-only | mandatory | Classification of Status/Alarm Input |
| 1.3.6.1.4.1.251.1.1.38.7.1.11 | ColumnuserInputStatus | read-only | mandatory | Current Status of Status/Alarm Input |
| 1.3.6.1.4.1.251.1.1.38.8 | ScalaralarmScanFile | read-write | mandatory | Rescan the alr_class.txt file |
| 1.3.6.1.4.1.251.1.1.39 | Nodedv2Cac | |||
| 1.3.6.1.4.1.251.1.1.39.1 | ScalarcacCurrentEbtId | read-only | mandatory | Current EBT file ID code. <DETAIL_DESCRIPTION> cacCurrentEbtId holds the EBT file ID code of the EBT file currently in memory in a verified state. The CAC appl… |
| 1.3.6.1.4.1.251.1.1.39.2 | ScalarcacEbtCommand | read-write | mandatory | EBT file command. <DETAIL_DESCRIPTION> This field, normally with the value none, may be set by the manager to: * load-ebt to initiate the loading of a new EBT … |
| 1.3.6.1.4.1.251.1.1.39.3 | ScalarcacCommandEbtId | read-write | mandatory | Command EBT file ID code. <DETAIL_DESCRIPTION> cacCommandEbtId is written to by the manager to identify the EBT file in the flash that should be loaded or dele… |
| 1.3.6.1.4.1.251.1.1.39.4 | ScalarcacEbtState | read-only | mandatory | State of the CAC. <DETAIL_DESCRIPTION> The state: * uninitialized is an initial MIB value which is never returned to without starting from a new MIB. * initial… |
| 1.3.6.1.4.1.251.1.1.39.5 | ScalarcacErrorCode | read-only | mandatory | Error code. <DETAIL_DESCRIPTION> Error codes are produced at certain stages in the CAC application. The interpretation of the error codes is: Terms: 'ebXXXXX.b… |
| 1.3.6.1.4.1.251.1.1.39.6 | TablecacPerLinkTable | not-accessible | mandatory | This table containing per link data. <DETAIL_DESCRIPTION> Contains per link specific data |
| 1.3.6.1.4.1.251.1.1.39.6.1 | RowcacPerLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.39.6.1.1 | ColumncacLinkNo | read-only | mandatory | Link number. <DETAIL_DESCRIPTION> cacLinkNo is the index (0..3) to the array of link data. |
| 1.3.6.1.4.1.251.1.1.39.6.1.2 | ColumncacLinkSumE10 | read-only | mandatory | Running sum of e10. <DETAIL_DESCRIPTION> cacSumE10 zero loss effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled… |
| 1.3.6.1.4.1.251.1.1.39.6.1.3 | ColumncacLinkSumE1T | read-only | mandatory | Running sum of e1T. <DETAIL_DESCRIPTION> cacSumE1T tangent effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled o… |
| 1.3.6.1.4.1.251.1.1.39.6.1.4 | ColumncacLinkObfPvc1 | read-write | mandatory | Utilization factor for high priority pvc. <DETAIL_DESCRIPTION> Utilization factor for PVCs and SPVCs for the high priority queue. |
| 1.3.6.1.4.1.251.1.1.39.6.1.5 | ColumncacLinkObfSvc1 | read-write | mandatory | Utilization factor for high priority svc. <DETAIL_DESCRIPTION> Utilization factor for SVCs for the high priority queue. |
| 1.3.6.1.4.1.251.1.1.39.6.1.6 | ColumncacLinkSumE20 | read-only | mandatory | Running sum of e20. <DETAIL_DESCRIPTION> cacSumE20 zero loss effective bandwidth for low priority queue. This value is maintained only when the CAC is enabled … |
| 1.3.6.1.4.1.251.1.1.39.6.1.7 | ColumncacLinkSumE2T | read-only | mandatory | Running sum of e2T. <DETAIL_DESCRIPTION> cacSumE1T zero tangent effective bandwidth for low priority queue. This value is maintained only when the CAC is enabl… |
| 1.3.6.1.4.1.251.1.1.39.6.1.8 | ColumncacLinkObfPvc2 | read-write | mandatory | Utilization factor for low priority pvc. <DETAIL_DESCRIPTION> Utilization factor for PVCs and SPVCs for the low priority queue. |
| 1.3.6.1.4.1.251.1.1.39.6.1.9 | ColumncacLinkObfSvc2 | read-write | mandatory | Utilization factor for low priority svc. <DETAIL_DESCRIPTION> Utilization factor for SVCs for the low priority queue. |
| 1.3.6.1.4.1.251.1.1.39.6.1.10 | ColumncacLinkTotalBwScrPcr | read-only | mandatory | total bw allocation on the link by scr-pcr CAC. <DETAIL_DESCRIPTION> cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is en… |
| 1.3.6.1.4.1.251.1.1.39.6.1.11 | ColumncacCurrentLinkUsage | read-only | mandatory | Current link bandwidth allocation. <DETAIL_DESCRIPTION> It is the current indication of bandwidth allocation on a link based on the formula using effective ban… |
| 1.3.6.1.4.1.251.1.1.39.6.1.12 | ColumncacMaxLinkUsage | read-only | mandatory | Max link bw allocation since last reset or card boot. <DETAIL_DESCRIPTION> cacMaxLinkUsage shows the maximum value that cacCurrentLinkUsage has reached since c… |
| 1.3.6.1.4.1.251.1.1.39.6.1.13 | ColumncacLinkReset | read-write | mandatory | Reload maximum link usage from current allocation. <DETAIL_DESCRIPTION> cacReset resets cacMaxLinkUsage, after the reset cacMaxLinkUsage shows the same value a… |
| 1.3.6.1.4.1.251.1.1.39.6.1.14 | ColumncacLinkVersion | read-write | mandatory | Use EB CAC or scr-pcr CAC? <DETAIL_DESCRIPTION> The per-link variable cacVersion may take on the values * SCR-PCR indicating that the old, pre Rel 4.2 CAC base… |
| 1.3.6.1.4.1.251.1.1.39.6.1.15 | ColumncacLinkEnable | read-write | mandatory | Enable cac? <DETAIL_DESCRIPTION> When cacEnable has the value * yes, then the three CAC service routines are operational as defined, * no, then all connections… |
| 1.3.6.1.4.1.251.1.1.39.6.1.16 | ColumncacLinkSignalMode | read-only | mandatory | Link signalling mode <DETAIL_DESCRIPTION> cacSignallingMode is a read-only variable indicating whether the link is currently in the signalling mode: * single-c… |
| 1.3.6.1.4.1.251.1.1.39.6.1.17 | ColumncacLinkState | read-only | mandatory | State of the Link <DETAIL_DESCRIPTION> The cacLinkState variable can take the values: * uninitialised is an initial MIB value which is never returned to withou… |
| 1.3.6.1.4.1.251.1.1.39.7 | TablecacPerSapTable | not-accessible | mandatory | This table containing per Sap data. <DETAIL_DESCRIPTION> The virtual SAP table in the MIB has 12 entries indexed by cacSapNo in the range (20..31). For each SA… |
| 1.3.6.1.4.1.251.1.1.39.7.1 | RowcacPerSapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.39.7.1.1 | ColumncacSapNo | read-only | mandatory | SAP number. <DETAIL_DESCRIPTION> cacSapNo is the index (0..11) to the array of sap data. |
| 1.3.6.1.4.1.251.1.1.39.7.1.2 | ColumncacSapSumE1T | read-only | mandatory | Running sum of e1T. <DETAIL_DESCRIPTION> cacSumE1T tangent effective bandwidth for high priority queue These values are maintained only when the CAC is enabled… |
| 1.3.6.1.4.1.251.1.1.39.7.1.3 | ColumncacSapSumE2T | read-only | mandatory | Running sum of e2T. <DETAIL_DESCRIPTION> cacSumE1T tangent effective bandwidth for low priority queue These values are maintained only when the CAC is enabled … |
| 1.3.6.1.4.1.251.1.1.39.7.1.4 | ColumncacSapTotalBwScrPcr | read-only | mandatory | total bw allocation on the link by scr-pcr CAC. <DETAIL_DESCRIPTION> cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is en… |
| 1.3.6.1.4.1.251.1.1.39.7.1.5 | ColumncacCurrentSapUsage | read-only | mandatory | Current SAP bandwidth allocation <DETAIL_DESCRIPTION> It is the current indication of bandwidth allocation on a sap based on the formula using effective bandwi… |
| 1.3.6.1.4.1.251.1.1.39.7.1.6 | ColumncacMaxSapUsage | read-only | mandatory | Max SAP b/w allocation since last reset or card boot. <DETAIL_DESCRIPTION> cacMaxSapUsage shows the maximum value that cacCurrentSapUsage has reached since cac… |
| 1.3.6.1.4.1.251.1.1.39.7.1.7 | ColumncacSapReset | read-write | mandatory | Reload maximum SAP usage from current allocation <DETAIL_DESCRIPTION> cacReset resets cacMaxSapUsage, after the reset cacMaxSapUsage shows the same value as ca… |
| 1.3.6.1.4.1.251.1.1.40 | Nodedv2MS2FRAC | |||
| 1.3.6.1.4.1.251.1.1.41 | Nodedv2aal5 | |||
| 1.3.6.1.4.1.251.1.1.42 | Nodevhsystem | |||
| 1.3.6.1.4.1.251.1.1.42.1 | ScalarlimHostRev | read-only | mandatory | Host S/W Revision |
| 1.3.6.1.4.1.251.1.1.42.2 | ScalarlimBootRev | read-only | mandatory | Boot S/W Revision |
| 1.3.6.1.4.1.251.1.1.42.3 | ScalarlimHwRev | read-only | mandatory | Hardware Architecture |
| 1.3.6.1.4.1.251.1.1.42.4 | ScalarlimAction | read-write | mandatory | LIM action |
| 1.3.6.1.4.1.251.1.1.42.5 | ScalarlimState | read-only | mandatory | LIM state |
| 1.3.6.1.4.1.251.1.1.42.6 | ScalarlimFault | read-only | mandatory | LIM Fault LED |
| 1.3.6.1.4.1.251.1.1.42.7 | ScalarlimFaultReason | read-only | mandatory | LIM Fault Reason |
| 1.3.6.1.4.1.251.1.1.42.8 | ScalarlimCodec0 | read-only | mandatory | H.320 Codec 0 Active LED |
| 1.3.6.1.4.1.251.1.1.42.9 | ScalarlimCodec1 | read-only | mandatory | H.320 Codec 1 Active LED |
| 1.3.6.1.4.1.251.1.1.42.10 | ScalarlimSCmgmt | read-only | mandatory | Slot Controller Mgmt Link Status |
| 1.3.6.1.4.1.251.1.1.42.11 | ScalarlimSCmgmtData | read-only | mandatory | Slot Controller Mgmt Information Data State |
| 1.3.6.1.4.1.251.1.1.42.12 | ScalarlimSCfileXferReq | read-write | mandatory | Slot Controller Mgmt File Transfer Request |
| 1.3.6.1.4.1.251.1.1.42.13 | ScalarlimSCfileXferStat | read-only | mandatory | Slot Controller Mgmt File Transfer State |
| 1.3.6.1.4.1.251.1.1.42.14 | ScalarlimSCbytes | read-only | mandatory | Slot Controller Mgmt File Transfer Byte Count |
| 1.3.6.1.4.1.251.1.1.43 | Nodevhcontrol | |||
| 1.3.6.1.4.1.251.1.1.43.1 | TablectrlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.1.1 | RowctrlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.1.1.1 | ColumnctrlIndex | read-only | mandatory | Codec Index |
| 1.3.6.1.4.1.251.1.1.43.1.1.2 | ColumnctrlCodecType | read-only | mandatory | Codec Type |
| 1.3.6.1.4.1.251.1.1.43.1.1.3 | ColumnctrlCodecAction | read-write | mandatory | Codec Action |
| 1.3.6.1.4.1.251.1.1.43.1.1.4 | ColumnctrlCodecReq | read-write | mandatory | Codec Request |
| 1.3.6.1.4.1.251.1.1.43.1.1.5 | ColumnctrlCallType | read-only | mandatory | Codec Call Type |
| 1.3.6.1.4.1.251.1.1.43.1.1.6 | ColumnctrlCodecSta | read-only | mandatory | Codec Status |
| 1.3.6.1.4.1.251.1.1.43.1.1.7 | ColumnctrlChnlLpbk | read-write | mandatory | Codec Channel Loopback |
| 1.3.6.1.4.1.251.1.1.43.1.1.8 | ColumnctrlFraming | read-only | mandatory | Codec H.221 Framing Detected |
| 1.3.6.1.4.1.251.1.1.43.1.1.9 | ColumnctrlChnlStat | read-only | mandatory | Codec Channel Link Status |
| 1.3.6.1.4.1.251.1.1.43.1.1.10 | ColumnctrlFaultReason | read-only | mandatory | Codec Fault Reason |
| 1.3.6.1.4.1.251.1.1.43.2 | TablevidTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.2.1 | RowvidEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.2.1.1 | ColumnvidIndex | read-only | mandatory | VH320 Codec Index |
| 1.3.6.1.4.1.251.1.1.43.2.1.2 | ColumnvidStandard | read-write | mandatory | VH320 Analog Video I/O Standard |
| 1.3.6.1.4.1.251.1.1.43.2.1.3 | ColumnvidTxVidReq | read-write | mandatory | VH320 Transmit Video Request |
| 1.3.6.1.4.1.251.1.1.43.2.1.4 | ColumnvidRxVidReq | read-write | mandatory | VH320 Display Video Request |
| 1.3.6.1.4.1.251.1.1.43.2.1.5 | ColumnvidViewPip | read-write | mandatory | VH320 View Self Picture in Picture |
| 1.3.6.1.4.1.251.1.1.43.2.1.6 | ColumnvidCompQual | read-write | mandatory | VH320 Compression Quality |
| 1.3.6.1.4.1.251.1.1.43.2.1.7 | ColumnvidDigLpbk | read-write | mandatory | VH320 Digital Loopback |
| 1.3.6.1.4.1.251.1.1.43.2.1.8 | ColumnvidEncFrameCount | read-only | mandatory | VH320 Video Encoded Frame Count |
| 1.3.6.1.4.1.251.1.1.43.2.1.9 | ColumnvidDecFrameCount | read-only | mandatory | VH320 Video Decoded Frame Count |
| 1.3.6.1.4.1.251.1.1.43.2.1.10 | ColumnvidState | read-only | mandatory | VH320 Video State |
| 1.3.6.1.4.1.251.1.1.43.2.1.11 | ColumnvidInPresent | read-only | mandatory | VH320 Video Input Present |
| 1.3.6.1.4.1.251.1.1.43.2.1.12 | ColumnvidEncBitRate | read-only | mandatory | VH320 Encoded Bitrate (bps) |
| 1.3.6.1.4.1.251.1.1.43.3 | TableaudTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.3.1 | RowaudEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.3.1.1 | ColumnaudIndex | read-only | mandatory | VH320 Codec Index |
| 1.3.6.1.4.1.251.1.1.43.3.1.2 | ColumnaudState | read-only | mandatory | VH320 Audio State |
| 1.3.6.1.4.1.251.1.1.43.3.1.3 | ColumnaudPrefMode | read-write | mandatory | VH320 Audio Preferred Coding Mode |
| 1.3.6.1.4.1.251.1.1.43.3.1.4 | ColumnaudCommMode | read-only | mandatory | VH320 Audio Common Coding Mode |
| 1.3.6.1.4.1.251.1.1.43.3.1.5 | ColumnaudBitRate | read-only | mandatory | VH320 Audio Bit Rate (bps) |
| 1.3.6.1.4.1.251.1.1.43.3.1.6 | ColumnaudMuteInReq | read-write | mandatory | VH320 Audio Mute Input Request |
| 1.3.6.1.4.1.251.1.1.43.3.1.7 | ColumnaudMuteOutReq | read-write | mandatory | VH320 Audio Mute Output Request |
| 1.3.6.1.4.1.251.1.1.43.3.1.8 | ColumnaudMuteOutStat | read-only | mandatory | VH320 Audio Mute Output Status |
| 1.3.6.1.4.1.251.1.1.43.3.1.9 | ColumnaudLpbk | read-write | mandatory | VH320 Audio Loopback Request |
| 1.3.6.1.4.1.251.1.1.43.3.1.10 | ColumnaudInVol | read-write | mandatory | VH320 Audio Input Volume |
| 1.3.6.1.4.1.251.1.1.43.3.1.11 | ColumnaudOutVol | read-write | mandatory | VH320 Audio Output Volume |
| 1.3.6.1.4.1.251.1.1.43.3.1.12 | ColumnaudInDelay | read-write | mandatory | VH320 Audio Input Delay Request (ms) |
| 1.3.6.1.4.1.251.1.1.43.3.1.13 | ColumnaudOutDelay | read-write | mandatory | VH320 Audio Output Delay Status (ms) |
| 1.3.6.1.4.1.251.1.1.43.3.1.14 | ColumnaudFaultReason | read-only | mandatory | VH320 Audio Fault Reason |
| 1.3.6.1.4.1.251.1.1.43.4 | TabledataTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.4.1 | RowdataEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.43.4.1.1 | ColumndataIndex | read-only | mandatory | VH320 Codec Index |
| 1.3.6.1.4.1.251.1.1.43.4.1.2 | ColumndataChnlType | read-write | mandatory | Data Channel Type |
| 1.3.6.1.4.1.251.1.1.43.4.1.3 | ColumndataPortSpeed | read-write | mandatory | Data Port Speed (bps) |
| 1.3.6.1.4.1.251.1.1.43.4.1.4 | ColumndataPortProt | read-write | mandatory | Data Port Protocol |
| 1.3.6.1.4.1.251.1.1.43.4.1.5 | ColumndataHDLCcheck | read-write | mandatory | HDLC Check CRC |
| 1.3.6.1.4.1.251.1.1.43.4.1.6 | ColumndataChnlStat | read-only | mandatory | Data Channel Status |
| 1.3.6.1.4.1.251.1.1.43.4.1.7 | ColumndataBytesRcvd | read-only | mandatory | Data Channel Bytes Received |
| 1.3.6.1.4.1.251.1.1.43.4.1.8 | ColumndataBytesSent | read-only | mandatory | Data Channel Bytes Sent |
| 1.3.6.1.4.1.251.1.1.43.4.1.9 | ColumndataResetStat | read-write | mandatory | Data Channel Reset Statistics |
| 1.3.6.1.4.1.251.1.1.44 | Nodevhmgmt | |||
| 1.3.6.1.4.1.251.1.1.44.1 | TablemgmtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.44.1.1 | RowmgmtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.44.1.1.1 | ColumnmgmtIndex | read-only | mandatory | VH320 Management Port Index |
| 1.3.6.1.4.1.251.1.1.44.1.1.2 | ColumnmgmtDescr | read-only | mandatory | VH320 Management Port Descriptor |
| 1.3.6.1.4.1.251.1.1.44.1.1.3 | ColumnmgmtPortProt | read-write | mandatory | Management Port Protocol |
| 1.3.6.1.4.1.251.1.1.44.1.1.4 | ColumnmgmtPortSpeed | read-write | mandatory | Management Port Speed (bps) |
| 1.3.6.1.4.1.251.1.1.44.1.1.5 | ColumnmgmtPortAddress | read-write | mandatory | Management Port Address |
| 1.3.6.1.4.1.251.1.1.44.1.1.6 | ColumnmgmtAddressMask | read-write | mandatory | Management Port Address Mask |
| 1.3.6.1.4.1.251.1.1.44.1.1.7 | ColumnmgmtRemoteAddress | read-write | mandatory | Management Remote Address |
| 1.3.6.1.4.1.251.1.1.44.1.1.8 | ColumnmgmtPortStat | read-only | mandatory | Management Port Status |
| 1.3.6.1.4.1.251.1.1.44.1.1.9 | ColumnmgmtBytesRcvd | read-only | mandatory | Management Bytes Received |
| 1.3.6.1.4.1.251.1.1.44.1.1.10 | ColumnmgmtBytesSent | read-only | mandatory | Management Bytes Sent |
| 1.3.6.1.4.1.251.1.1.44.1.1.11 | ColumnmgmtResetStat | read-write | mandatory | Management Reset Statistics |
| 1.3.6.1.4.1.251.1.1.76 | NodemainInServ | This is sent when the Main Slot 0 Controller goes into service | ||
| 1.3.6.1.4.1.251.1.1.77 | NodestandbyInServ | This is sent when the Standby Slot 0 Controller goes into service | ||
| 1.3.6.1.4.1.251.1.1.78 | Nodebill25pstfull | This is sent when billing table is 25% full. | ||
| 1.3.6.1.4.1.251.1.1.79 | Nodebill75pstfull | This is sent when billing table is 75% full. | ||
| 1.3.6.1.4.1.251.1.1.80 | Noderestart040 | This is sent when the master processor has been restarted by the 68302 processor. | ||
| 1.3.6.1.4.1.251.1.1.81 | NodealcTxError | This is sent after master processor has been reset due to ALC-87 Transmitter Error. | ||
| 1.3.6.1.4.1.251.1.1.91 | Nodelim-fault | Configured LIM type does not match the LIM in slot | ||
| 1.3.6.1.4.1.251.1.1.92 | Nodelim-oper | LIM operational | ||
| 1.3.6.1.4.1.251.1.1.93 | NodepsuAbsent | PSU Absent detected | ||
| 1.3.6.1.4.1.251.1.1.94 | NodepsuPresent | PSU Presence detected | ||
| 1.3.6.1.4.1.251.1.1.95 | NodeswitchFabricSwap | Switch Fabric Redundant Swap | ||
| 1.3.6.1.4.1.251.1.1.106 | NodeinternalReset | This is sent after the software has detected an internal error and restarted itself. | ||
| 1.3.6.1.4.1.251.1.1.107 | Nodeaal1Fault | This is sent when an AAL1 fault has occurred. | ||
| 1.3.6.1.4.1.251.1.1.108 | Nodeaal1Clear | This is sent when an AAL1 fault has been cleared. | ||
| 1.3.6.1.4.1.251.1.1.109 | Nodeds1LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.110 | Nodeds1LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.111 | Nodeds1AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.112 | Nodeds1Yellow | Yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.113 | Nodeds1ExBER | Excessive Bit Error Rate Alarm | ||
| 1.3.6.1.4.1.251.1.1.114 | Nodeds1v2LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.115 | Nodeds1v2LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.116 | Nodeds1v2AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.117 | Nodeds1v2Yellow | Yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.118 | Nodeds1v2ExBER | Excessive Bit Error Rate Alarm | ||
| 1.3.6.1.4.1.251.1.1.119 | Nodeds3LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.120 | Nodeds3V2LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.121 | Nodeds3LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.122 | Nodeds3AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.123 | Nodeds3Yellow | Yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.124 | Nodeds3ExBER | Excessive Bit Error Rate Alarm | ||
| 1.3.6.1.4.1.251.1.1.125 | Nodeds3FEFrmrDif | Received frame format is different than configured frame format | ||
| 1.3.6.1.4.1.251.1.1.126 | Nodee1LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.127 | Nodee1LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.128 | Nodee1AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.129 | Nodee1Yellow | Yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.130 | Nodee1ExBER | Excessive Bit Error Rate Alarm | ||
| 1.3.6.1.4.1.251.1.1.131 | Nodee3LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.132 | Nodee3LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.133 | Nodee3AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.134 | Nodee3Yellow | Yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.135 | Nodee3ExBER | Excessive Bit Error Rate Alarm | ||
| 1.3.6.1.4.1.251.1.1.136 | Nodelocd | Loss Of Cell Delineation | ||
| 1.3.6.1.4.1.251.1.1.137 | NodeplcpYellow | PLCP yellow alarm | ||
| 1.3.6.1.4.1.251.1.1.138 | NodeplcpLOF | PLCP Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.139 | NodesdhLOS | SONET/SDH Loss of Signal | ||
| 1.3.6.1.4.1.251.1.1.140 | NodesdhLOF | SONET/SDH Loss of Frame | ||
| 1.3.6.1.4.1.251.1.1.141 | NodesdhLineAIS | SONET/SDH Line AIS failure | ||
| 1.3.6.1.4.1.251.1.1.142 | NodesdhPathAIS | SONET/SDH Path AIS failure | ||
| 1.3.6.1.4.1.251.1.1.143 | NodesdhLOP | SONET/SDH Loss of Pointer | ||
| 1.3.6.1.4.1.251.1.1.144 | NodesdhPLM | SONET/SDH Path Label Mismatch | ||
| 1.3.6.1.4.1.251.1.1.145 | NodesdhLineYellow | SONET/SDH Line FERF failure | ||
| 1.3.6.1.4.1.251.1.1.146 | NodesdhPathYellow | SONET/SDH Path Yellow failure | ||
| 1.3.6.1.4.1.251.1.1.147 | NodesdhExBER | SONET/SDH Excessive Bit Error Rate | ||
| 1.3.6.1.4.1.251.1.1.148 | NodeclockActiveRef | Current Active Reference | ||
| 1.3.6.1.4.1.251.1.1.149 | NodeoutOfResource | Link cell rate is not sufficient for established connections | ||
| 1.3.6.1.4.1.251.1.1.150 | NodehssiLOS | HSSI Loss of Signal | ||
| 1.3.6.1.4.1.251.1.1.151 | NodehssiDTEReady | DTE is Ready | ||
| 1.3.6.1.4.1.251.1.1.152 | NodehssiDCEReady | DCE is Ready | ||
| 1.3.6.1.4.1.251.1.1.153 | NodehssiDTENotReady | DTE is not Ready | ||
| 1.3.6.1.4.1.251.1.1.154 | NodehssiDCENotReady | DCE is not Ready | ||
| 1.3.6.1.4.1.251.1.1.155 | Nodeuserstatus1 | |||
| 1.3.6.1.4.1.251.1.1.156 | Nodeuserstatus2 | |||
| 1.3.6.1.4.1.251.1.1.157 | Nodepntmoper | Sent when Primary NTM card operational status changes | ||
| 1.3.6.1.4.1.251.1.1.158 | Nodesntmoper | Sent when Secondary NTM card operational status changes | ||
| 1.3.6.1.4.1.251.1.1.159 | Nodepntmoscstatus | Sent when Primary NTM card oscillator status changes | ||
| 1.3.6.1.4.1.251.1.1.160 | Nodesntmoscstatus | Sent when secondary NTM card oscillator status changes | ||
| 1.3.6.1.4.1.251.1.1.161 | Nodepbitslineok | Sent when Primary NTM card BITS line status changes | ||
| 1.3.6.1.4.1.251.1.1.162 | Nodesbitslineok | Sent when secondary NTM card BITS line status changes | ||
| 1.3.6.1.4.1.251.1.1.163 | NodesvcHalfConnect | SVC half connect detected | ||
| 1.3.6.1.4.1.251.1.1.164 | NodeduplicateIpAddr | Sent When a duplicate IP address is detected. | ||
| 1.3.6.1.4.1.251.1.1.165 | NodesvcQsaalReset | Sent when SAP is reset | ||
| 1.3.6.1.4.1.251.1.1.166 | NodesvcQsaalUpDown | Sent when SAP transitions between Up and Down | ||
| 1.3.6.1.4.1.251.1.1.167 | NodesvcT309Expiry | Sent when T309 timer expired and calls exist on a SAP | ||
| 1.3.6.1.4.1.251.1.1.168 | Nodej2LOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.169 | Nodej2LOF | Loss of Frame alarm | ||
| 1.3.6.1.4.1.251.1.1.170 | Nodej2AIS | AIS alarm | ||
| 1.3.6.1.4.1.251.1.1.171 | Nodej2RAI | RAI alarm | ||
| 1.3.6.1.4.1.251.1.1.172 | NodescfLOS | Loss of Signal alarm | ||
| 1.3.6.1.4.1.251.1.1.173 | NoderouteLoadFail | def.rtb file load failure | ||
| 1.3.6.1.4.1.251.1.1.174 | NodedTLLoadFail | dtl.bin file load failure | ||
| 1.3.6.1.4.1.251.1.1.175 | NoderedunNotAvail | This is sent when the Redundant Slot 0 Controller is not available | ||
| 1.3.6.1.4.1.251.1.1.176 | NoderedunAvail | This is sent when the Redundant Slot 0 Controller is available | ||
| 1.3.6.1.4.1.251.1.1.177 | NodedQ7-error | This trap is sent when edos discovers a DQ7 error in flash | ||
| 1.3.6.1.4.1.251.1.1.178 | NodeoamVcaRcvAIS-RDI | This trap is generated when an AIS or RDI is received on VCa port | ||
| 1.3.6.1.4.1.251.1.1.179 | NodeoamVcbRcvAIS-RDI | This trap is generated when an AIS or RDI is received on VCb port |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateTimeString | OCTET STRING (SIZE (8)) | ||
| E164 | OCTET STRING (SIZE (2..10)) | ||
| E164SUB | OCTET STRING (SIZE (2..22)) | ||
| Hex | INTEGER (0..65535) | ||
| Q93bCauseDiag | OCTET STRING (SIZE (4)) | ||
| VirtualCircuitIdentifier | INTEGER (0..65535) | ||
| VirtualPathIdentifier | INTEGER (0..4095) |