DVB-RCS-MIB
220 objects
DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp DscpOrAny |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| URI-TC-MIB | Uri |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.239 | IdentitydvbRcsMib | DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return … | ||
| 1.3.6.1.2.1.10.239.1 | NodedvbRcsMibObjects | |||
| 1.3.6.1.2.1.10.239.1.1 | NodedvbRcsRcst | |||
| 1.3.6.1.2.1.10.239.1.1.1 | NodedvbRcsRcstSystem | |||
| 1.3.6.1.2.1.10.239.1.1.1.1 | ScalardvbRcsSystemMibRevision | read-only | current | This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported. |
| 1.3.6.1.2.1.10.239.1.1.1.2 | ScalardvbRcsSystemSatLabsProfilesDeclaration | read-only | current | Indicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations. |
| 1.3.6.1.2.1.10.239.1.1.1.3 | ScalardvbRcsSystemSatLabsOptionsDeclaration | read-only | current | Indicates the SatLabs options supported, as defined in the SatLabs System Recommendations. |
| 1.3.6.1.2.1.10.239.1.1.1.4 | ScalardvbRcsSystemSatLabsFeaturesDeclaration | read-only | current | Indicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations. |
| 1.3.6.1.2.1.10.239.1.1.1.5 | ScalardvbRcsSystemLocation | read-write | current | Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: <xxxx.xxx>,<a… |
| 1.3.6.1.2.1.10.239.1.1.1.6 | ScalardvbRcsSystemOduAntennaSize | read-write | current | Diameter of the antenna. |
| 1.3.6.1.2.1.10.239.1.1.1.7 | ScalardvbRcsSystemOduAntennaGain | read-write | current | Antenna peak gain of the ODU. |
| 1.3.6.1.2.1.10.239.1.1.1.8 | ScalardvbRcsSystemOduSspa | read-write | current | Power level of the Solid State Power Amplifier installed in the ODU. |
| 1.3.6.1.2.1.10.239.1.1.1.9 | ScalardvbRcsSystemOduTxType | read-write | current | Type of transmitter installed in the ODU. |
| 1.3.6.1.2.1.10.239.1.1.1.10 | ScalardvbRcsSystemOduRxType | read-write | current | Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc. |
| 1.3.6.1.2.1.10.239.1.1.1.11 | ScalardvbRcsSystemOduRxBand | read-write | current | LNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low B… |
| 1.3.6.1.2.1.10.239.1.1.1.12 | ScalardvbRcsSystemOduRxLO | read-write | current | Frequency of LNB Local Oscillator (in 100 Hz) |
| 1.3.6.1.2.1.10.239.1.1.1.13 | ScalardvbRcsSystemOduTxLO | read-write | current | Frequency of Block Up-Converter Local Oscillator (in 100 Hz). |
| 1.3.6.1.2.1.10.239.1.1.1.14 | NodedvbRcsSystemIduPep | |||
| 1.3.6.1.2.1.10.239.1.1.1.14.1 | ScalardvbRcsTcpPep | read-write | current | Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled |
| 1.3.6.1.2.1.10.239.1.1.1.14.2 | ScalardvbRcsHttpPep | read-write | current | Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled |
| 1.3.6.1.2.1.10.239.1.1.1.15 | NodedvbRcsOduTx | |||
| 1.3.6.1.2.1.10.239.1.1.1.15.1 | TabledvbRcsOduTxTypeTable | not-accessible | current | This table contains the identification of each well- known BUC type supported by the IDU and provides its associated index. |
| 1.3.6.1.2.1.10.239.1.1.1.15.1.1 | RowdvbRcsOduTxTypeEntry | not-accessible | current | An entry in the BUC type table. |
| 1.3.6.1.2.1.10.239.1.1.1.15.1.1.1 | ColumndvbRcsOduTxTypeIndex | not-accessible | current | Index for the BUC type. |
| 1.3.6.1.2.1.10.239.1.1.1.15.1.1.2 | ColumndvbRcsOduTxTypeDescription | read-only | current | Text-based identification of a BUC type. |
| 1.3.6.1.2.1.10.239.1.1.1.15.2 | ScalardvbRcsOduTxType | read-write | current | Index of the selected BUC type. |
| 1.3.6.1.2.1.10.239.1.1.1.16 | NodedvbRcsOduRx | |||
| 1.3.6.1.2.1.10.239.1.1.1.16.1 | TabledvbRcsOduRxTypeTable | not-accessible | current | This table contains the identification of each well- known LNB type supported by the IDU and provides its associated index. |
| 1.3.6.1.2.1.10.239.1.1.1.16.1.1 | RowdvbRcsOduRxTypeEntry | not-accessible | current | An entry in the LNB type table. |
| 1.3.6.1.2.1.10.239.1.1.1.16.1.1.1 | ColumndvbRcsOduRxTypeIndex | not-accessible | current | Index for the LNB type. |
| 1.3.6.1.2.1.10.239.1.1.1.16.1.1.2 | ColumndvbRcsOduRxTypeDescription | read-only | current | Text-based identification of an LNB type. |
| 1.3.6.1.2.1.10.239.1.1.1.16.2 | ScalardvbRcsOduRxType | read-write | current | Index of the selected LNB type. |
| 1.3.6.1.2.1.10.239.1.1.1.17 | NodedvbRcsOduAntenna | |||
| 1.3.6.1.2.1.10.239.1.1.1.17.1 | TabledvbRcsOduAntennaTypeTable | not-accessible | current | This table contains the identification of each well- known antenna type supported by the IDU and provides its associated index. |
| 1.3.6.1.2.1.10.239.1.1.1.17.1.1 | RowdvbRcsOduAntennaTypeEntry | not-accessible | current | An entry in the antenna type table. |
| 1.3.6.1.2.1.10.239.1.1.1.17.1.1.1 | ColumndvbRcsOduAntennaTypeIndex | not-accessible | current | Index for the antenna type. |
| 1.3.6.1.2.1.10.239.1.1.1.17.1.1.2 | ColumndvbRcsOduAntennaTypeDescription | read-only | current | Text-based identification of an antenna type. |
| 1.3.6.1.2.1.10.239.1.1.1.17.2 | ScalardvbRcsOduAntennaType | read-write | current | Index of the selected antenna type. |
| 1.3.6.1.2.1.10.239.1.1.2 | NodedvbRcsRcstNetwork | |||
| 1.3.6.1.2.1.10.239.1.1.2.1 | ScalardvbRcsNetworkOamInetAddressType | read-write | current | The type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is un… |
| 1.3.6.1.2.1.10.239.1.1.2.2 | ScalardvbRcsNetworkOamInetAddress | read-write | current | OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic pa… |
| 1.3.6.1.2.1.10.239.1.1.2.3 | ScalardvbRcsNetworkOamInetAddressPrefixLength | read-write | current | Prefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.4 | ScalardvbRcsNetworkOamInetAddressAssign | read-write | current | Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned. |
| 1.3.6.1.2.1.10.239.1.1.2.5 | ScalardvbRcsNetworkLanInetAddressType | read-write | current | The type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of … |
| 1.3.6.1.2.1.10.239.1.1.2.6 | ScalardvbRcsNetworkLanInetAddress | read-write | current | IP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, … |
| 1.3.6.1.2.1.10.239.1.1.2.7 | ScalardvbRcsNetworkLanInetAddressPrefixLength | read-write | current | Prefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.8 | ScalardvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType | read-write | current | The type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the … |
| 1.3.6.1.2.1.10.239.1.1.2.9 | ScalardvbRcsNetworkAirInterfaceDefaultGatewayInetAddress | read-write | current | IP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is un… |
| 1.3.6.1.2.1.10.239.1.1.2.10 | ScalardvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength | read-write | current | Prefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.11 | NodedvbRcsNetworkDnsServers | |||
| 1.3.6.1.2.1.10.239.1.1.2.11.1 | ScalardvbRcsPrimaryDnsServerInetAddressType | read-write | current | The type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this … |
| 1.3.6.1.2.1.10.239.1.1.2.11.2 | ScalardvbRcsPrimaryDnsServerInetAddress | read-write | current | IP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this o… |
| 1.3.6.1.2.1.10.239.1.1.2.11.3 | ScalardvbRcsPrimaryDnsServerInetAddressPrefixLength | read-write | current | Prefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.11.4 | ScalardvbRcsSecondaryDnsServerInetAddressType | read-write | current | The type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of t… |
| 1.3.6.1.2.1.10.239.1.1.2.11.5 | ScalardvbRcsSecondaryDnsServerInetAddress | read-write | current | IP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of th… |
| 1.3.6.1.2.1.10.239.1.1.2.11.6 | ScalardvbRcsSecondaryDnsServerInetAddressPrefixLength | read-write | current | Prefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.12 | ScalardvbRcsNetworkNccMgtInetAddressType | read-write | current | The type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this obje… |
| 1.3.6.1.2.1.10.239.1.1.2.13 | ScalardvbRcsNetworkNccMgtInetAddress | read-write | current | IP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this obj… |
| 1.3.6.1.2.1.10.239.1.1.2.14 | ScalardvbRcsNetworkNccMgtInetAddressPrefixLength | read-write | current | Prefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero. |
| 1.3.6.1.2.1.10.239.1.1.2.15 | ScalardvbRcsNetworkConfigFileDownloadUrl | read-write | current | Full path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can … |
| 1.3.6.1.2.1.10.239.1.1.2.16 | ScalardvbRcsNetworkInstallLogFileDownloadUrl | read-write | current | Full path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can … |
| 1.3.6.1.2.1.10.239.1.1.2.17 | ScalardvbRcsNetworkConfigFileUploadUrl | read-write | current | Full path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can on… |
| 1.3.6.1.2.1.10.239.1.1.2.18 | ScalardvbRcsNetworkLogFileUploadUrl | read-write | current | Full path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS… |
| 1.3.6.1.2.1.10.239.1.1.2.19 | ScalardvbRcsNetworkInstallLogFileUploadUrl | read-write | current | Full path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used… |
| 1.3.6.1.2.1.10.239.1.1.3 | NodedvbRcsRcstInstall | |||
| 1.3.6.1.2.1.10.239.1.1.3.1 | ScalardvbRcsInstallAntennaAlignmentState | read-write | current | Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail |
| 1.3.6.1.2.1.10.239.1.1.3.2 | ScalardvbRcsInstallCwFrequency | read-write | current | Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz. |
| 1.3.6.1.2.1.10.239.1.1.3.3 | ScalardvbRcsInstallCwMaxDuration | read-write | current | Time after which the Continuous Wave carrier must be put down (in seconds). |
| 1.3.6.1.2.1.10.239.1.1.3.4 | ScalardvbRcsInstallCwPower | read-write | current | IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a… |
| 1.3.6.1.2.1.10.239.1.1.3.5 | ScalardvbRcsInstallCoPolReading | read-write | current | Co-polarization measured value during installation procedure (in 0.1 dB). |
| 1.3.6.1.2.1.10.239.1.1.3.6 | ScalardvbRcsInstallXPolReading | read-write | current | Cross-polarization measured value during installation procedure (in 0.1 dB). |
| 1.3.6.1.2.1.10.239.1.1.3.7 | ScalardvbRcsInstallCoPolTarget | read-write | current | Co-polarization target value during installation procedure (in 0.1 dB). |
| 1.3.6.1.2.1.10.239.1.1.3.8 | ScalardvbRcsInstallXPolTarget | read-write | current | Cross-polarization target value during installation procedure (in 0.1 dB). |
| 1.3.6.1.2.1.10.239.1.1.3.9 | ScalardvbRcsInstallStandByDuration | read-write | current | Time to wait in stand-by mode (in seconds). |
| 1.3.6.1.2.1.10.239.1.1.3.10 | ScalardvbRcsInstallTargetEsN0 | read-write | current | This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth o… |
| 1.3.6.1.2.1.10.239.1.1.4 | NodedvbRcsRcstQos | |||
| 1.3.6.1.2.1.10.239.1.1.4.1 | TabledvbRcsPktClassTable | not-accessible | current | This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1 | RowdvbRcsPktClassEntry | not-accessible | current | An entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types a… |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.1 | ColumndvbRcsPktClassIndex | not-accessible | current | Index automatically incremented by one at row creation. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.2 | ColumndvbRcsPktClassDscpLow | read-create | current | This object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.3 | ColumndvbRcsPktClassDscpHigh | read-create | current | This object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.4 | ColumndvbRcsPktClassDscpMarkValue | read-create | current | This object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63) |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.5 | ColumndvbRcsPktClassIpProtocol | read-create | current | This object specifies the IP protocol to which a packet is compared. A value of 255 means match all. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.6 | ColumndvbRcsPktClassSrcInetAddressType | read-create | current | The type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this obje… |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.7 | ColumndvbRcsPktClassSrcInetAddress | read-create | current | This object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet addr… |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.8 | ColumndvbRcsPktClassSrcInetAddressPrefixLength | read-create | current | Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.9 | ColumndvbRcsPktClassDstInetAddressType | read-create | current | The type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this… |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.10 | ColumndvbRcsPktClassDstInetAddress | read-create | current | This object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Int… |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.11 | ColumndvbRcsPktClassDstInetAddressPrefixLength | read-create | current | Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.12 | ColumndvbRcsPktClassSrcPortLow | read-create | current | This object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.13 | ColumndvbRcsPktClassSrcPortHigh | read-create | current | This object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.14 | ColumndvbRcsPktClassDstPortLow | read-create | current | This object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.15 | ColumndvbRcsPktClassDstPortHigh | read-create | current | This object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.16 | ColumndvbRcsPktClassVlanUserPri | read-create | current | This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive. |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.17 | ColumndvbRcsPktClassPhbAssociation | read-create | current | Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier). |
| 1.3.6.1.2.1.10.239.1.1.4.1.1.18 | ColumndvbRcsPktClassRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. |
| 1.3.6.1.2.1.10.239.1.1.4.2 | TabledvbRcsPhbMappingTable | not-accessible | current | This table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class. |
| 1.3.6.1.2.1.10.239.1.1.4.2.1 | RowdvbRcsPhbMappingEntry | not-accessible | current | An entry in the PHB mapping table. |
| 1.3.6.1.2.1.10.239.1.1.4.2.1.1 | ColumndvbRcsPhbIdentifier | not-accessible | current | Identification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB. |
| 1.3.6.1.2.1.10.239.1.1.4.2.1.2 | ColumndvbRcsPhbName | read-create | current | The name of the Per-Hop Behavior (PHB). |
| 1.3.6.1.2.1.10.239.1.1.4.2.1.3 | ColumndvbRcsPhbRequestClassAssociation | read-create | current | This object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index). |
| 1.3.6.1.2.1.10.239.1.1.4.2.1.4 | ColumndvbRcsPhbMappingRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. |
| 1.3.6.1.2.1.10.239.1.1.4.3 | TabledvbRcsRequestClassTable | not-accessible | current | This table is a list of Request Class entries. This class describes the layer 2 QoS objects. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1 | RowdvbRcsRequestClassEntry | not-accessible | current | An entry in the Request Class table. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.1 | ColumndvbRcsRequestClassIndex | not-accessible | current | Index of the Request Class table. A total of 16 entries are supported. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.2 | ColumndvbRcsRequestClassName | read-create | current | Name of the Request Class. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.3 | ColumndvbRcsRequestClassChanId | read-create | current | Channel ID of the Request Class. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.4 | ColumndvbRcsRequestClassVccVpi | read-create | current | Defines the VPI used for the Request Class (ATM profile). |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.5 | ColumndvbRcsRequestClassVccVci | read-create | current | Defines the VCI used for the Request Class (ATM profile). |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.6 | ColumndvbRcsRequestClassPidPoolReference | read-create | current | Reference to the Packet IDentifier (PID) pool applicable for the Request Class. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.7 | ColumndvbRcsRequestClassCra | read-create | current | Defines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s). |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.8 | ColumndvbRcsRequestClassRbdcMax | read-create | current | Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.9 | ColumndvbRcsRequestClassRbdcTimeout | read-create | current | Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.10 | ColumndvbRcsRequestClassVbdcMax | read-create | current | Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe. |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.11 | ColumndvbRcsRequestClassVbdcTimeout | read-create | current | Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) … |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.12 | ColumndvbRcsRequestClassVbdcMaxBackLog | read-create | current | Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes). |
| 1.3.6.1.2.1.10.239.1.1.4.3.1.13 | ColumndvbRcsRequestClassRowStatus | read-create | current | The status of this conceptual row. It is not possible to change values in a row of this table while the row is active. |
| 1.3.6.1.2.1.10.239.1.1.4.4 | TabledvbRcsPidPoolTable | not-accessible | current | This table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Secti… |
| 1.3.6.1.2.1.10.239.1.1.4.4.1 | RowdvbRcsPidPoolEntry | not-accessible | current | An entry in the PID pool table. |
| 1.3.6.1.2.1.10.239.1.1.4.4.1.1 | ColumndvbRcsPidPoolIndex | not-accessible | current | Index of the PID pool in the PID pool table. |
| 1.3.6.1.2.1.10.239.1.1.4.4.1.2 | ColumndvbRcsPidIndex | not-accessible | current | Index of the PID entry within the PID pool. |
| 1.3.6.1.2.1.10.239.1.1.4.4.1.3 | ColumndvbRcsPidValue | read-create | current | Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur o… |
| 1.3.6.1.2.1.10.239.1.1.4.4.1.4 | ColumndvbRcsPidPoolRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. |
| 1.3.6.1.2.1.10.239.1.1.4.5 | ScalardvbRcsQosGlobalRbdcMax | read-write | current | Global maximum RBDC that can be requested for the RCST, in number of 2 kbit/s. |
| 1.3.6.1.2.1.10.239.1.1.4.6 | ScalardvbRcsQosGlobalVbdcMax | read-write | current | Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe. |
| 1.3.6.1.2.1.10.239.1.1.4.7 | ScalardvbRcsQosGlobalVbdcMaxBackLog | read-write | current | Global VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes). |
| 1.3.6.1.2.1.10.239.1.1.4.8 | ScalardvbRcsQosChannelIdStrictDispatching | read-write | current | Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association |
| 1.3.6.1.2.1.10.239.1.1.5 | NodedvbRcsRcstControl | |||
| 1.3.6.1.2.1.10.239.1.1.5.1 | ScalardvbRcsCtrlRebootCommand | read-write | current | This variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load… |
| 1.3.6.1.2.1.10.239.1.1.5.2 | ScalardvbRcsCtrlRcstTxDisable | read-write | current | This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled |
| 1.3.6.1.2.1.10.239.1.1.5.3 | ScalardvbRcsCtrlUserTrafficDisable | read-write | current | This variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user traffic |
| 1.3.6.1.2.1.10.239.1.1.5.4 | ScalardvbRcsCtrlCwEnable | read-write | current | This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmissio… |
| 1.3.6.1.2.1.10.239.1.1.5.5 | ScalardvbRcsCtrlOduTxReferenceEnable | read-write | current | Enables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) on |
| 1.3.6.1.2.1.10.239.1.1.5.6 | ScalardvbRcsCtrlOduTxDCEnable | read-write | current | Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on |
| 1.3.6.1.2.1.10.239.1.1.5.7 | ScalardvbRcsCtrlOduRxDCEnable | read-write | current | Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on |
| 1.3.6.1.2.1.10.239.1.1.5.8 | ScalardvbRcsCtrlDownloadFileCommand | read-write | current | This variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST i… |
| 1.3.6.1.2.1.10.239.1.1.5.9 | ScalardvbRcsCtrlUploadFileCommand | read-write | current | This variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP… |
| 1.3.6.1.2.1.10.239.1.1.5.10 | ScalardvbRcsCtrlActivateConfigFileCommand | read-write | current | Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to tak… |
| 1.3.6.1.2.1.10.239.1.1.5.11 | ScalardvbRcsCtrlRcstLogonCommand | read-write | current | This variable will initiate an RCST logon: (1) idle (2) initiate RCST logon |
| 1.3.6.1.2.1.10.239.1.1.5.12 | ScalardvbRcsCtrlRcstLogoffCommand | read-write | current | This variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoff |
| 1.3.6.1.2.1.10.239.1.1.5.13 | ScalardvbRcsCtrlRcstRxReacquire | read-write | current | This variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward link |
| 1.3.6.1.2.1.10.239.1.1.6 | NodedvbRcsRcstState | |||
| 1.3.6.1.2.1.10.239.1.1.6.1 | ScalardvbRcsRcstMode | read-write | current | Identifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Oper… |
| 1.3.6.1.2.1.10.239.1.1.6.2 | ScalardvbRcsRcstFaultStatus | read-only | current | Provides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1) |
| 1.3.6.1.2.1.10.239.1.1.6.3 | ScalardvbRcsRcstFwdLinkStatus | read-only | current | Provides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1) |
| 1.3.6.1.2.1.10.239.1.1.6.4 | ScalardvbRcsRcstRtnLinkStatus | read-only | current | Provides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1) |
| 1.3.6.1.2.1.10.239.1.1.6.5 | ScalardvbRcsRcstLogUpdated | read-only | current | Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication a… |
| 1.3.6.1.2.1.10.239.1.1.6.6 | ScalardvbRcsRcstCurrentSoftwareVersion | read-only | current | Current RCST software version. |
| 1.3.6.1.2.1.10.239.1.1.6.7 | ScalardvbRcsRcstAlternateSoftwareVersion | read-only | current | Alternate (backup/new) RCST software version. |
| 1.3.6.1.2.1.10.239.1.1.6.8 | ScalardvbRcsRcstActivatedConfigFileVersion | read-only | current | Version of the most recently activated configuration file. The version is vendor specific. |
| 1.3.6.1.2.1.10.239.1.1.6.9 | ScalardvbRcsRcstDownloadedConfigFileVersion | read-only | current | Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it… |
| 1.3.6.1.2.1.10.239.1.2 | NodedvbRcsFwdLink | |||
| 1.3.6.1.2.1.10.239.1.2.1 | NodedvbRcsFwdConfig | |||
| 1.3.6.1.2.1.10.239.1.2.1.1 | TabledvbRcsFwdStartTable | not-accessible | current | Lists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up st… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1 | RowdvbRcsFwdStartEntry | not-accessible | current | An entry in the Forward Link Start Configuration table. |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.1 | ColumndvbRcsFwdStartIndex | not-accessible | current | Index of the Forward Link StartConfig table. |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.2 | ColumndvbRcsFwdStartPopId | read-create | current | Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership o… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.3 | ColumndvbRcsFwdStartFrequency | read-create | current | Frequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in mu… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.4 | ColumndvbRcsFwdStartPolar | read-create | current | 2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: … |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.5 | ColumndvbRcsFwdStartFormat | read-create | current | Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses fo… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.6 | ColumndvbRcsFwdStartRolloff | read-create | current | Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquir… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.7 | ColumndvbRcsFwdStartSymbolRate | read-create | current | Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shal… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.8 | ColumndvbRcsFwdStartInnerFec | read-create | current | Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forw… |
| 1.3.6.1.2.1.10.239.1.2.1.1.1.9 | ColumndvbRcsFwdStartRowStatus | read-create | current | The status of this conceptual row. It is not possible to change values in a row of this table while the row is active. |
| 1.3.6.1.2.1.10.239.1.2.2 | NodedvbRcsFwdStatus | |||
| 1.3.6.1.2.1.10.239.1.2.2.1 | ScalardvbRcsFwdStatusPopId | read-only | current | Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base numbe… |
| 1.3.6.1.2.1.10.239.1.2.2.2 | TabledvbRcsFwdStatusTable | not-accessible | current | This table describes the current status of Forward Link interfaces. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1 | RowdvbRcsFwdStatusEntry | not-accessible | current | An entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.1 | ColumndvbRcsFwdStatusIndex | not-accessible | current | Index of the forward link status table. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.2 | ColumndvbRcsFwdStatusIfReference | read-only | current | Cross reference to the interface table. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.3 | ColumndvbRcsFwdStatusNetId | read-only | current | Interactive network identifier of the forward link (from the RCS Map Table). |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.4 | ColumndvbRcsFwdStatusNetName | read-only | current | The name of the interactive network of the forward link (from the RCS Map Table). |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.5 | ColumndvbRcsFwdStatusFormat | read-only | current | Specifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or A… |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.6 | ColumndvbRcsFwdStatusFrequency | read-only | current | An estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.7 | ColumndvbRcsFwdStatusPolar | read-only | current | 2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circul… |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.8 | ColumndvbRcsFwdStatusInnerFec | read-only | current | Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate… |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.9 | ColumndvbRcsFwdStatusSymbolRate | read-only | current | An estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.10 | ColumndvbRcsFwdStatusRolloff | read-only | current | An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35 |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.11 | ColumndvbRcsFwdStatusModulation | read-only | current | Indicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK Th… |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.12 | ColumndvbRcsFwdStatusFecFrame | read-only | current | Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will… |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.13 | ColumndvbRcsFwdStatusPilot | read-only | current | Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used … |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.14 | ColumndvbRcsFwdStatusBer | read-only | current | Provides the RCST BER on the Forward Link in log10 units. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.15 | ColumndvbRcsFwdStatusCnr | read-only | current | Provides the RCST CNR on the Forward Link in 0.1 dB units. |
| 1.3.6.1.2.1.10.239.1.2.2.2.1.16 | ColumndvbRcsFwdStatusRxPower | read-only | current | Provides the power level of the forward link as received at the IDU, in 0.1 dBm units. |
| 1.3.6.1.2.1.10.239.1.3 | NodedvbRcsRtnLink | |||
| 1.3.6.1.2.1.10.239.1.3.1 | NodedvbRcsRtnConfig | |||
| 1.3.6.1.2.1.10.239.1.3.1.1 | ScalardvbRcsRtnConfigMaxEirp | read-write | current | Max Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX outpu… |
| 1.3.6.1.2.1.10.239.1.3.1.2 | ScalardvbRcsRtnConfigDefIfLevel | read-write | current | IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. |
| 1.3.6.1.2.1.10.239.1.3.2 | NodedvbRcsRtnStatus | |||
| 1.3.6.1.2.1.10.239.1.3.2.1 | ScalardvbRcsRtnStatusEbN0 | read-only | current | The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units. |
| 1.3.6.1.2.1.10.239.1.3.2.2 | ScalardvbRcsRtnStatusSFDuration | read-only | current | The duration of the currently applied return link superframe structure, in tenths of milliseconds. |
| 1.3.6.1.2.1.10.239.1.3.2.3 | ScalardvbRcsRtnStatusPayloadUnit | read-only | current | Indicates if the payload unit used for the return link is ATM or MPEG. |
| 1.3.6.1.2.1.10.239.2 | NodedvbRcsConformance | |||
| 1.3.6.1.2.1.10.239.2.1 | NodedvbRcsRcstGroups | |||
| 1.3.6.1.2.1.10.239.2.1.1 | GroupdvbRcsRcstSystemGroup | current | A collection of objects providing information applicable for basic device management support. | |
| 1.3.6.1.2.1.10.239.2.1.2 | GroupdvbRcsRcstNetworkGroup | current | A collection of objects providing basic networking management support. | |
| 1.3.6.1.2.1.10.239.2.1.3 | GroupdvbRcsRcstExtNetworkGroup | current | A collection of objects providing extended networking management support. | |
| 1.3.6.1.2.1.10.239.2.1.4 | GroupdvbRcsRcstDnsGroup | current | A collection of objects providing DNS management support. | |
| 1.3.6.1.2.1.10.239.2.1.5 | GroupdvbRcsRcstInstallGroup | current | A collection of objects providing information applicable for basic installation support. | |
| 1.3.6.1.2.1.10.239.2.1.6 | GroupdvbRcsRcstExtInstallGroup | current | A collection of objects providing extended device installation support. | |
| 1.3.6.1.2.1.10.239.2.1.7 | GroupdvbRcsRcstQosGroup | current | A collection of objects providing basic access to QoS configuration data. | |
| 1.3.6.1.2.1.10.239.2.1.8 | GroupdvbRcsRcstEnhancedClassifierGroup | current | A collection of objects providing support for management of the enhanced classifier. | |
| 1.3.6.1.2.1.10.239.2.1.9 | GroupdvbRcsRcstMpegQosGroup | current | A collection of objects providing access to MPEG-related link QoS configuration data. | |
| 1.3.6.1.2.1.10.239.2.1.10 | GroupdvbRcsRcstGlobalQosGroup | current | A collection of objects providing access to global RCST QoS configuration data. | |
| 1.3.6.1.2.1.10.239.2.1.11 | GroupdvbRcsRcstStrictQosGroup | current | A collection of objects allowing management of strict channel ID dispatching. | |
| 1.3.6.1.2.1.10.239.2.1.12 | GroupdvbRcsRcstControlGroup | current | A collection of objects allowing basic RCST control. | |
| 1.3.6.1.2.1.10.239.2.1.13 | GroupdvbRcsRcstExtControlGroup | current | A collection of objects allowing extended RCST control. | |
| 1.3.6.1.2.1.10.239.2.1.14 | GroupdvbRcsRcstStateGroup | current | A collection of objects allowing access to RCST state. | |
| 1.3.6.1.2.1.10.239.2.1.15 | GroupdvbRcsFwdConfigGroup | current | A collection of objects providing basic start forward link configuration support. | |
| 1.3.6.1.2.1.10.239.2.1.16 | GroupdvbRcsFwdStatusGroup | current | A collection of objects providing forward link status. | |
| 1.3.6.1.2.1.10.239.2.1.17 | GroupdvbRcsRtnConfigGroup | current | A collection of objects providing basic return link configuration support. | |
| 1.3.6.1.2.1.10.239.2.1.18 | GroupdvbRcsRtnExtConfigGroup | current | A collection of objects providing extended return link configuration support. | |
| 1.3.6.1.2.1.10.239.2.1.19 | GroupdvbRcsRtnStatusGroup | current | A collection of objects allowing access to return link status. | |
| 1.3.6.1.2.1.10.239.2.1.20 | GroupdvbRcsRtnExtStatusGroup | current | A collection of objects allowing access to extended return link status. | |
| 1.3.6.1.2.1.10.239.2.1.21 | GroupdvbRcsRcstOduListGroup | current | A collection of objects supporting flexible selection of ODU devices. | |
| 1.3.6.1.2.1.10.239.2.2 | NodedvbRcsRcstCompliances | |||
| 1.3.6.1.2.1.10.239.2.2.1 | CompliancedvbRcsRcstCompliance1 | read-only | current | The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of t… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DvbRcsSatLabsFeatureMap | BITS { rcstPara(0), installLog(1), enhClassifier(2), routeId(3), oduList(4), extNetwork(5), extControl(6), extConfig(7), extStatus(8), mpaf(9), spare1(10), spare2(11), spare3(12), spare4(13), spare5(14), spare6(15), spare7(16), spare8(17), spare9(18), spare10(19), spare11(20), spare12(21), spare13(22), spare14(23), spare15(24), spare16(25), spare17(26), spare18(27), spare19(28), spare20(29), spare21(30), spare22(31) } | current | This textual convention enumerates the declaration of the SatLabs-specified compatibility and configuration features. A value of 1 indicates that the respective feature is supported. The mapping to the features is to be… |
| DvbRcsSatLabsOptionMap | BITS { mpegTrf(0), coarseSync(1), wideHop(2), fastHop(3), dynamicMfTdma(4), contentionSync(5), qpskLow(6), mod16Apsk(7), mod32Apsk(8), normalFec(9), multiTs(10), gsTs(11), enhQoS(12), pep(13), http(14), ftp(15), dns(16), chIdStrict(17), nlid(18), snmpMisc(19), spare1(20), spare2(21), spare3(22), spare4(23), spare5(24), spare6(25), spare7(26), spare8(27), spare9(28), spare10(29), spare11(30), spare12(31) } | current | This textual convention enumerates the declaration of the SatLabs-defined options. A value of 1 indicates that the respective option is supported. The mapping to the options is to be understood as described here. (0) re… |
| DvbRcsSatLabsProfileMap | BITS { dvbs(0), dvbs2ccm(1), dvbs2acm(2), spare1(3), spare2(4), spare3(5), spare4(6), spare5(7), spare6(8), spare7(9), spare8(10), spare9(11), spare10(12), spare11(13), spare12(14), spare13(15), spare14(16), spare15(17), spare16(18), spare17(19), spare18(20), spare19(21), spare20(22), spare21(23), spare22(24), spare23(25), spare24(26), spare25(27), spare26(28), spare27(29), spare28(30), spare29(31) } | current | This textual convention enumerates the declaration of the SatLabs-defined terminal profiles. The mapping to the profiles is to be understood as described here. (0) refers to the most significant bit. dvbs(0) -> DVBS pro… |