DXA550-MIB
347 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | ScalarifSpecific | read-only | mandatory | |
| 0.0 | NodenullSpecific | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.1 | Nodedirectory | |||
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | TableipAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1 | RowipAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1.1 | ColumnipAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ColumnipAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ColumnipAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ColumnipAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.20.1.5 | ColumnipAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.4.21 | TableipRouteTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.2.1.4.21.1 | RowipRouteEntry | not-accessible | mandatory | A route to a particular destination. |
| 1.3.6.1.2.1.4.21.1.1 | ColumnipRouteDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ColumnipRouteIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ColumnipRouteMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.4 | ColumnipRouteMetric2 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.5 | ColumnipRouteMetric3 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.6 | ColumnipRouteMetric4 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.7 | ColumnipRouteNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ColumnipRouteType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ColumnipRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.10 | ColumnipRouteAge | read-write | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.4.21.1.11 | ColumnipRouteMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.12 | ColumnipRouteMetric5 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.13 | ColumnipRouteInfo | read-write | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.5.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.2.1.5.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.2.1.5.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.2.1.5.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.2.1.5.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.2.1.5.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.2.1.5.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.2.1.5.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.2.1.5.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.2.1.5.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.2.1.5.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.2.1.5.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.2.1.5.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.2.1.5.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.2.1.5.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.2.1.5.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.2.1.5.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.2.1.5.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.2.1.5.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.2.1.5.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.2.1.5.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.2.1.5.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.2.1.5.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.2.1.5.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.2.1.5.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.2.1.5.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.7.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.2.1.7.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.2.1.7.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.2.1.7.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.2.1.7.5 | TableudpTable | not-accessible | mandatory | A table containing UDP listener information. |
| 1.3.6.1.2.1.7.5.1 | RowudpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.2.1.7.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.2.1.7.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthenTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.3 | Nodeexperimental | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.187 | Nodedatability | |||
| 1.3.6.1.4.1.187.1 | NodecExper | |||
| 1.3.6.1.4.1.187.1.3 | Nodedot3 | |||
| 1.3.6.1.4.1.187.1.3.1 | Tabledot3Table | not-accessible | mandatory | Status information and control variables for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.187.1.3.1.1 | Rowdot3Entry | not-accessible | mandatory | Status information and control variables for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.187.1.3.1.1.1 | Columndot3Index | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.187.1.3.1.1.2 | Columndot3InitializeMac | read-write | mandatory | The initialization status of the MAC and PLS (Physical Layer Signalling) subsystems for a particular interface. The value initialized(1) signifies that the sub… |
| 1.3.6.1.4.1.187.1.3.1.1.3 | Columndot3MacSubLayerStatus | read-write | mandatory | The operational status of the MAC sublayer for a particular interface. The value enabled(1) signifies that the MAC sublayer for said interface is operational f… |
| 1.3.6.1.4.1.187.1.3.1.1.4 | Columndot3MulticastReceiveStatus | read-write | mandatory | The multicast receive status for a particular interface. The value enabled(1) signifies that reception of multicast frames by the MAC sublayer is enabled on sa… |
| 1.3.6.1.4.1.187.1.3.1.1.5 | Columndot3TxEnabled | read-write | mandatory | The transmit layer management state variable (transmitEnabled as defined in [9]) for a particular interface. The value true(1) signifies that the MAC frame tra… |
| 1.3.6.1.4.1.187.1.3.1.1.6 | Columndot3TestTdrValue | read-only | mandatory | The number of 10 MHz ticks which elapsed between the beginning of a TDR measurement and the collision which ended it, for the most recently executed TDR test. … |
| 1.3.6.1.4.1.187.1.3.2 | Tabledot3StatsTable | not-accessible | mandatory | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.187.1.3.2.1 | Rowdot3StatsEntry | not-accessible | mandatory | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.187.1.3.2.1.1 | Columndot3StatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.187.1.3.2.1.2 | Columndot3StatsAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.187.1.3.2.1.3 | Columndot3StatsFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.187.1.3.2.1.4 | Columndot3StatsSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.187.1.3.2.1.5 | Columndot3StatsMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.187.1.3.2.1.6 | Columndot3StatsSQETestErrors | read-only | mandatory | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.4.1.187.1.3.2.1.7 | Columndot3StatsDeferredTransmissions | read-only | mandatory | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.187.1.3.2.1.8 | Columndot3StatsLateCollisions | read-only | mandatory | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.187.1.3.2.1.9 | Columndot3StatsExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.187.1.3.2.1.10 | Columndot3StatsInternalMacTransmitErrors | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.187.1.3.2.1.11 | Columndot3StatsCarrierSenseErrors | read-only | mandatory | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.187.1.3.2.1.12 | Columndot3StatsExcessiveDeferrals | read-only | mandatory | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
| 1.3.6.1.4.1.187.1.3.2.1.13 | Columndot3StatsFrameTooLongs | read-only | mandatory | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.187.1.3.2.1.14 | Columndot3StatsInRangeLengthErrors | read-only | mandatory | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LL… |
| 1.3.6.1.4.1.187.1.3.2.1.15 | Columndot3StatsOutOfRangeLengthFields | read-only | mandatory | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an in… |
| 1.3.6.1.4.1.187.1.3.2.1.16 | Columndot3StatsInternalMacReceiveErrors | read-only | mandatory | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.187.1.3.8 | Nodedot3ChipSets | |||
| 1.3.6.1.4.1.187.1.3.8.1 | Nodedot3ChipSetAMD | |||
| 1.3.6.1.4.1.187.1.3.8.1.1 | Nodedot3ChipSetAMD7990 | |||
| 1.3.6.1.4.1.187.1.3.8.1.2 | Nodedot3ChipSetAMD79900 | |||
| 1.3.6.1.4.1.187.1.3.8.2 | Nodedot3ChipSetIntel | |||
| 1.3.6.1.4.1.187.1.3.8.2.1 | Nodedot3ChipSetIntel82586 | |||
| 1.3.6.1.4.1.187.1.3.8.2.2 | Nodedot3ChipSetIntel82596 | |||
| 1.3.6.1.4.1.187.1.3.8.3 | Nodedot3ChipSetSeeq | |||
| 1.3.6.1.4.1.187.1.3.8.3.1 | Nodedot3ChipSetSeeq8003 | |||
| 1.3.6.1.4.1.187.1.3.8.4 | Nodedot3ChipSetNational | |||
| 1.3.6.1.4.1.187.1.3.8.4.1 | Nodedot3ChipSetNational8390 | |||
| 1.3.6.1.4.1.187.1.3.8.4.2 | Nodedot3ChipSetNationalSonic | |||
| 1.3.6.1.4.1.187.1.6 | NodeifExtensions | |||
| 1.3.6.1.4.1.187.1.6.1 | TableifExtnsTable | not-accessible | mandatory | A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6]. |
| 1.3.6.1.4.1.187.1.6.1.1 | RowifExtnsEntry | not-accessible | mandatory | An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.187.1.6.1.1.1 | ColumnifExtnsIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.187.1.6.1.1.2 | ColumnifExtnsChipSet | read-only | mandatory | This object identifies the hardware chip set being used in the interface. The assignment of OBJECT IDENTIFIERs to various types of hardware chip sets is define… |
| 1.3.6.1.4.1.187.1.6.1.1.3 | ColumnifExtnsRevWare | read-only | mandatory | An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII … |
| 1.3.6.1.4.1.187.1.6.1.1.4 | ColumnifExtnsMulticastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protoc… |
| 1.3.6.1.4.1.187.1.6.1.1.5 | ColumnifExtnsBroadcastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address. |
| 1.3.6.1.4.1.187.1.6.1.1.6 | ColumnifExtnsMulticastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes bo… |
| 1.3.6.1.4.1.187.1.6.1.1.7 | ColumnifExtnsBroadcastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address. |
| 1.3.6.1.4.1.187.1.6.1.1.8 | ColumnifExtnsPromiscuous | read-only | mandatory | This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.4.1.187.1.6.3 | TableifExtnsRcvAddrTable | not-accessible | mandatory | This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. … |
| 1.3.6.1.4.1.187.1.6.3.1 | RowifExtnsRcvAddrEntry | not-accessible | mandatory | A list of objects identifying an address for which the system will accept packets/ frames on a particular interface. |
| 1.3.6.1.4.1.187.1.6.3.1.1 | ColumnifExtnsRcvAddrIfIndex | read-only | mandatory | The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address. |
| 1.3.6.1.4.1.187.1.6.3.1.2 | ColumnifExtnsRcvAddress | read-only | mandatory | An address for which the system will accept packets/frames on this entry's interface. |
| 1.3.6.1.4.1.187.1.6.3.1.3 | ColumnifExtnsRcvAddrStatus | read-write | mandatory | This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entr… |
| 1.3.6.1.4.1.187.1.14 | Nodedot1dBridge | |||
| 1.3.6.1.4.1.187.1.14.1 | Nodedot1dBase | |||
| 1.3.6.1.4.1.187.1.14.1.1 | Scalardot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.187.1.14.1.2 | Scalardot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.187.1.14.1.3 | Scalardot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.187.1.14.1.4 | Tabledot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.4.1.187.1.14.1.4.1 | Rowdot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.187.1.14.1.4.1.1 | Columndot1dBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information |
| 1.3.6.1.4.1.187.1.14.1.4.1.2 | Columndot1dBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in [4,6], for the interface corresponding to this port |
| 1.3.6.1.4.1.187.1.14.1.4.1.3 | Columndot1dBasePortCircuit | read-only | mandatory | For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instan… |
| 1.3.6.1.4.1.187.1.14.1.4.1.4 | Columndot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.187.1.14.1.4.1.5 | Columndot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.187.1.14.2 | Nodedot1dStp | |||
| 1.3.6.1.4.1.187.1.14.2.1 | Scalardot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.187.1.14.2.2 | Scalardot1dStpPriority | read-write | mandatory | The value of the priority field which is contained in the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are give… |
| 1.3.6.1.4.1.187.1.14.2.3 | Scalardot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.187.1.14.2.4 | Scalardot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.187.1.14.2.5 | Scalardot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.187.1.14.2.6 | Scalardot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.187.1.14.2.7 | Scalardot1dStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.187.1.14.2.8 | Scalardot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.187.1.14.2.9 | Scalardot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.187.1.14.2.10 | Scalardot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.187.1.14.2.11 | Scalardot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.187.1.14.2.12 | Scalardot1dStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. |
| 1.3.6.1.4.1.187.1.14.2.13 | Scalardot1dStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. |
| 1.3.6.1.4.1.187.1.14.2.14 | Scalardot1dStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| 1.3.6.1.4.1.187.1.14.2.15 | Tabledot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.187.1.14.2.15.1 | Rowdot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.187.1.14.2.15.1.1 | Columndot1dStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.187.1.14.2.15.1.2 | Columndot1dStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of do… |
| 1.3.6.1.4.1.187.1.14.2.15.1.3 | Columndot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.187.1.14.2.15.1.4 | Columndot1dStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.187.1.14.2.15.1.5 | Columndot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. |
| 1.3.6.1.4.1.187.1.14.2.15.1.6 | Columndot1dStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the LAN to which the Port i… |
| 1.3.6.1.4.1.187.1.14.2.15.1.7 | Columndot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.187.1.14.2.15.1.8 | Columndot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.187.1.14.2.15.1.9 | Columndot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.187.1.14.2.15.1.10 | Columndot1dStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.187.1.14.4 | Nodedot1dTp | |||
| 1.3.6.1.4.1.187.1.14.4.1 | Scalardot1dTpLearntEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.4.1.187.1.14.4.2 | Scalardot1dTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.4.1.187.1.14.4.3 | Tabledot1dTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.187.1.14.4.3.1 | Rowdot1dTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.187.1.14.4.3.1.1 | Columndot1dTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.187.1.14.4.3.1.2 | Columndot1dTpFdbPort | read-only | mandatory | Either the value '0', or the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.… |
| 1.3.6.1.4.1.187.1.14.4.3.1.3 | Columndot1dTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.4.1.187.1.14.4.4 | Tabledot1dTpPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.4.1.187.1.14.4.4.1 | Rowdot1dTpPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.4.1.187.1.14.4.4.1.1 | Columndot1dTpPort | read-only | mandatory | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.4.1.187.1.14.4.4.1.2 | Columndot1dTpPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.187.1.14.4.4.1.3 | Columndot1dTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.187.1.14.4.4.1.4 | Columndot1dTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.187.1.14.4.4.1.5 | Columndot1dTpPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded by the Forwarding Process. |
| 1.3.6.1.4.1.187.2 | NodecProducts | |||
| 1.3.6.1.4.1.187.2.1 | Nodecdxa560 | |||
| 1.3.6.1.4.1.187.2.2 | Nodecdxa550 | |||
| 1.3.6.1.4.1.187.3 | NodecStdExtensions | |||
| 1.3.6.1.4.1.187.3.4 | NodecIp | |||
| 1.3.6.1.4.1.187.3.4.1 | ScalarcIpInLenErrors | read-only | mandatory | Number of packets received with an inconsistant Header/Packet length |
| 1.3.6.1.4.1.187.3.4.2 | ScalarcIpInVersionErrors | read-only | mandatory | Number of packets received with an incorrect IP version number. |
| 1.3.6.1.4.1.187.3.4.3 | ScalarcIpInCSErrors | read-only | mandatory | Number of packets received with an incorrect IP checksum. |
| 1.3.6.1.4.1.187.3.4.4 | ScalarcIpTTLZero | read-only | mandatory | Number of packets that would have been forwarded but their TTL went to 0. |
| 1.3.6.1.4.1.187.3.4.5 | ScalarcIpReasmTimeOuts | read-only | mandatory | Number of reassmebly timeouts. This is included inthe ipReasmFails object. |
| 1.3.6.1.4.1.187.3.5 | NodecIcmp | |||
| 1.3.6.1.4.1.187.3.5.1 | ScalarcIcmpInRedirectNet | read-only | mandatory | Number of ICMP Destination Unreachable, Network Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.2 | ScalarcIcmpInRedirectHost | read-only | mandatory | Number of ICMP Destination Unreachable, Host Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.3 | ScalarcIcmpInRedirectNetTos | read-only | mandatory | Number of ICMP Destination Unreachable, Network/TOS Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.4 | ScalarcIcmpInRedirectHostTos | read-only | mandatory | Number of ICMP Destination Unreachable, Host/TOS Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.5 | ScalarcIcmpInTimeExcTTL | read-only | mandatory | Number of ICMP Time Exceeded, TTL Exceeded in Transit messages received. |
| 1.3.6.1.4.1.187.3.5.6 | ScalarcIcmpInTimeExcReAsm | read-only | mandatory | Number of ICMP Time Exceeded, Reassembly Time Exceeded messages received. |
| 1.3.6.1.4.1.187.3.5.7 | ScalarcIcmpInDestUnNet | read-only | mandatory | Number of ICMP Network Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.8 | ScalarcIcmpInDestUnHost | read-only | mandatory | Number of ICMP Host Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.9 | ScalarcIcmpInDestUnProtocol | read-only | mandatory | Number of ICMP Protocol Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.10 | ScalarcIcmpInDestUnPort | read-only | mandatory | Number of ICMP Port Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.11 | ScalarcIcmpInDestUnFragNeeded | read-only | mandatory | Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.12 | ScalarcIcmpInDestUnSourceRoute | read-only | mandatory | Number of ICMP Source Route Failed Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.13 | ScalarcIcmpOutRedirectNet | read-only | mandatory | Number of ICMP Destination Unreachable, Network Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.14 | ScalarcIcmpOutRedirectHost | read-only | mandatory | Number of ICMP Destination Unreachable, Host Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.15 | ScalarcIcmpOutRedirectNetTos | read-only | mandatory | Number of ICMP Destination Unreachable, Network/TOS Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.16 | ScalarcIcmpOutRedirectHostTos | read-only | mandatory | Number of ICMP Destination Unreachable, Host/TOS Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.17 | ScalarcIcmpOutTimeExcTTL | read-only | mandatory | Number of ICMP Time Exceeded, TTL Exceeded in Transit messages sent. |
| 1.3.6.1.4.1.187.3.5.18 | ScalarcIcmpOutTimeExcReAsm | read-only | mandatory | Number of ICMP Time Exceeded, Reassembly Time Exceeded messages sent. |
| 1.3.6.1.4.1.187.3.5.19 | ScalarcIcmpOutDestUnNet | read-only | mandatory | Number of ICMP Network Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.20 | ScalarcIcmpOutDestUnHost | read-only | mandatory | Number of ICMP Host Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.21 | ScalarcIcmpOutDestUnProtocol | read-only | mandatory | Number of ICMP Protocol Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.22 | ScalarcIcmpOutDestUnPort | read-only | mandatory | Number of ICMP Port Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.23 | ScalarcIcmpOutDestUnFragNeeded | read-only | mandatory | Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.24 | ScalarcIcmpOutDestUnSourceRoute | read-only | mandatory | Number of ICMP Source Route Failed Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.25 | ScalarcIcmpInLengthErrors | read-only | mandatory | Number of alleged ICMP packets that were not long enough. |
| 1.3.6.1.4.1.187.3.5.26 | ScalarcIcmpInChecksumErrors | read-only | mandatory | Number of alleged ICMP packets that had a bad checksum. |
| 1.3.6.1.4.1.187.3.5.27 | ScalarcIcmpInUnkTypes | read-only | mandatory | Number of Received ICMP packets with an unknown type field value. |
| 1.3.6.1.4.1.187.3.5.28 | ScalarcIcmpInDestUnNetUnknown | read-only | mandatory | Number of ICMP Destination Network Unknown Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.29 | ScalarcIcmpInDestUnHostUnknown | read-only | mandatory | Number of ICMP Destination Host Unknown Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.30 | ScalarcIcmpInDestUnSrcIsolated | read-only | mandatory | Number of ICMP Source Isolated Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.31 | ScalarcIcmpInDestUnHostProhib | read-only | mandatory | Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.32 | ScalarcIcmpInDestUnNetProhib | read-only | mandatory | Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.33 | ScalarcIcmpInDestUnNetTos | read-only | mandatory | Number of ICMP Network Unreachable with TOS messages received. |
| 1.3.6.1.4.1.187.3.5.34 | ScalarcIcmpInDestUnHostTos | read-only | mandatory | Number of ICMP Host Unreachable with TOS messages received. |
| 1.3.6.1.4.1.187.3.5.35 | ScalarcIcmpOutDestUnNetUnknown | read-only | mandatory | Number of ICMP Destination Network Unknown Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.36 | ScalarcIcmpOutDestUnHostUnknown | read-only | mandatory | Number of ICMP Destination Host Unknown Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.37 | ScalarcIcmpOutDestUnSrcIsolated | read-only | mandatory | Number of ICMP Source Isolated Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.38 | ScalarcIcmpOutDestUnHostProhib | read-only | mandatory | Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.39 | ScalarcIcmpOutDestUnNetProhib | read-only | mandatory | Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.40 | ScalarcIcmpOutDestUnNetTos | read-only | mandatory | Number of ICMP Network Unreachable with TOS messages sent. |
| 1.3.6.1.4.1.187.3.5.41 | ScalarcIcmpOutDestUnHostTos | read-only | mandatory | Number of ICMP Host Unreachable with TOS messages sent. |
| 1.3.6.1.4.1.187.3.5.42 | ScalarcIcmpInParmProbMissingOpt | read-only | mandatory | Number of received Parameter Problem messages with the Missing Option code. |
| 1.3.6.1.4.1.187.3.5.43 | ScalarcIcmpOutParmProbMissingOpt | read-only | mandatory | Number of sent Parameter Problem messages with the Missing Option code. |
| 1.3.6.1.4.1.187.3.7 | NodecUdp | |||
| 1.3.6.1.4.1.187.3.7.1 | ScalarcUdpHdrDrops | read-only | mandatory | Nr of packets dropped because of internal consistancy problems. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.2 | ScalarcUdpBadCheckSum | read-only | mandatory | Nr of packets dropped because of an incorrect checksum. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.3 | ScalarcUdpBadLength | read-only | mandatory | Nr of packets dropped because of an incorrect length. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.4 | ScalarcUdpOtherErrors | read-only | mandatory | Nr of packets dropped because of some error other than one of the above. This counter is a component of the udpInErrors Count. The most likely cause of these e… |
| 1.3.6.1.4.1.187.3.7.5 | ScalarcUdpNoChecksum | read-only | mandatory | Nr of packets received with a checksum of 0. This is not an error condition but indicates that there are mentally retarded hosts on the network. |
| 1.3.6.1.4.1.187.3.10 | NodecTransmission | |||
| 1.3.6.1.4.1.187.3.10.3 | NodecDot3 | |||
| 1.3.6.1.4.1.187.3.10.3.1 | TablecDot3Table | not-accessible | mandatory | Extended status information for the datability specific LANCE and ILACC drivers. |
| 1.3.6.1.4.1.187.3.10.3.1.1 | RowcDot3Entry | not-accessible | mandatory | Proprietary status information for a particular interface |
| 1.3.6.1.4.1.187.3.10.3.1.1.1 | ColumncDot3Index | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.187.3.10.3.1.1.2 | ColumncDot3Disables | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the interface was disabled |
| 1.3.6.1.4.1.187.3.10.3.1.1.3 | ColumncDot3MauDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because m-lance-cs-mau-connected was 0. |
| 1.3.6.1.4.1.187.3.10.3.1.1.4 | ColumncDot3Babbles | read-only | mandatory | Number of times the LANCE/ILACC Babble bit was set. |
| 1.3.6.1.4.1.187.3.10.3.1.1.5 | ColumncDot3MerrDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the memory error bit was set. |
| 1.3.6.1.4.1.187.3.10.3.1.1.6 | ColumncDot3TxonDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the txon bit was off. |
| 1.3.6.1.4.1.187.3.10.3.1.1.7 | ColumncDot3RxonDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the rxon bit was off. |
| 1.3.6.1.4.1.187.3.10.3.1.1.8 | ColumncDot3XmitFailure | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because no packets were received and every transmit attempt resulted in a failure. |
| 1.3.6.1.4.1.187.3.10.3.1.1.9 | ColumncDot3XmitBuffErr | read-only | mandatory | Number of LANCE/ILLAC transmit buffer errors that occured. |
| 1.3.6.1.4.1.187.3.10.3.1.1.10 | ColumncDot3XmitUflo | read-only | mandatory | Number of LANCE/ILLAC transmit underflo errors that occured. |
| 1.3.6.1.4.1.187.3.10.3.1.1.11 | ColumncDot3RcvBuffErr | read-only | mandatory | Number of LANCE/ILLAC receive buffer errors that occured. |
| 1.3.6.1.4.1.187.3.10.3.1.1.12 | ColumncDot3RcvOflo | read-only | mandatory | Number of LANCE/ILLAC receive overflo errors that occured. |
| 1.3.6.1.4.1.187.3.10.3.1.1.13 | ColumncDot3Startless | read-only | mandatory | Number of times that the driver did not get a start-of-message when one was expected. This if for reception. |
| 1.3.6.1.4.1.187.3.10.3.1.1.14 | ColumncDot3Endless | read-only | mandatory | Number of times that the driver detected the start of one packet without detecting the end of the previous packet. This is for reception. |
| 1.3.6.1.4.1.187.4 | NodedDXA550 | |||
| 1.3.6.1.4.1.187.4.1 | ScalardDXA550AvailableBuffers | read-only | mandatory | Count of available data buffers |
| 1.3.6.1.4.1.187.4.2 | ScalardDXA550InitialBuffers | read-only | mandatory | Initial amount of buffers available at system startup. |
| 1.3.6.1.4.1.187.4.3 | ScalarcConstallationBufferDataLength | read-only | mandatory | Number of data bytes that can be stored in each buffer. |
| 1.3.6.1.4.1.187.4.4 | ScalardDXA550InstructionRam | read-only | mandatory | Number of bytes of system instruction ram available. This is fast, zero-wait-state RAM. |
| 1.3.6.1.4.1.187.4.5 | ScalardDXA550GlobalDataRam | read-only | mandatory | Number of bytes of global data ram available. This is RAM contains I/O buffers and other data structures for which zero-wait-state access is not required by th… |
| 1.3.6.1.4.1.187.4.6 | ScalardDXA550FastDataRam | read-only | mandatory | Number of bytes of fast data ram available. This is RAM contains data structures for which the CPU requires zero-wait-state access, such as the bridge forwardi… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |