EASYTOOLS-MIB
2112 objects
Copyright (c) 2010-2019 OpenHeadend Copyright (c) 2020-2024 EasyTools EasyTools is a world-leading provider of open head-end equipment.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35902 | Identityeasytools | Copyright (c) 2010-2019 OpenHeadend Copyright (c) 2020-2024 EasyTools EasyTools is a world-leading provider of open head-end equipment. | ||
| 1.3.6.1.4.1.35902.1 | Nodeserver | |||
| 1.3.6.1.4.1.35902.1.0 | NodeserverTraps | |||
| 1.3.6.1.4.1.35902.1.0.1 | NotificationserverSystemStart | current | Notification sent when system starts | |
| 1.3.6.1.4.1.35902.1.0.2 | NotificationserverSystemStop | current | Notification sent when system stops | |
| 1.3.6.1.4.1.35902.1.0.3 | NotificationserverSystemReload | current | Notification sent when SNMP configuration is reloaded | |
| 1.3.6.1.4.1.35902.1.0.4 | NotificationserverFunctionUp | current | Notification sent when a function starts | |
| 1.3.6.1.4.1.35902.1.0.5 | NotificationserverFunctionDown | current | Notification sent when a function stops | |
| 1.3.6.1.4.1.35902.1.0.6 | NotificationserverLinkNetUp | current | Notification sent when a net link is inserted | |
| 1.3.6.1.4.1.35902.1.0.7 | NotificationserverLinkNetDown | current | Notification sent when a net link is removed | |
| 1.3.6.1.4.1.35902.1.0.8 | NotificationserverLinkDvbUp | current | Notification sent when a DVB link is inserted | |
| 1.3.6.1.4.1.35902.1.0.9 | NotificationserverLinkDvbDown | current | Notification sent when a DVB link is removed | |
| 1.3.6.1.4.1.35902.1.0.10 | NotificationserverLinkStorageUp | current | Notification sent when a storage link gets available | |
| 1.3.6.1.4.1.35902.1.0.11 | NotificationserverLinkStorageDown | current | Notification sent when a storage link gets unavailable | |
| 1.3.6.1.4.1.35902.1.0.12 | NotificationserverScheduleStart | current | Notification sent when a schedule starts | |
| 1.3.6.1.4.1.35902.1.0.13 | NotificationserverLinkStorageFull | current | Notification sent when a storage link is nearly full | |
| 1.3.6.1.4.1.35902.1.0.14 | NotificationserverOperationHintEvent | current | Notification sent when a hint operation triggers an event | |
| 1.3.6.1.4.1.35902.1.0.15 | NotificationserverLinkAsiRxUp | current | Notification sent when a DVB-ASI RX link is inserted | |
| 1.3.6.1.4.1.35902.1.0.16 | NotificationserverLinkAsiRxDown | current | Notification sent when a DVB-ASI RX link is removed | |
| 1.3.6.1.4.1.35902.1.0.17 | NotificationserverProcessRunStatusChange | current | Notification sent when a process changes status | |
| 1.3.6.1.4.1.35902.1.0.18 | NotificationserverLinkVideoRxUp | current | Notification sent when a video RX link is inserted | |
| 1.3.6.1.4.1.35902.1.0.19 | NotificationserverLinkVideoRxDown | current | Notification sent when a video RX link is removed | |
| 1.3.6.1.4.1.35902.1.0.20 | NotificationserverOperationHintScte35Event | current | Notification sent when a hint scte35 operation triggers an event | |
| 1.3.6.1.4.1.35902.1.0.21 | NotificationserverFunctionPlayoutEvent | current | Notification sent when a playout function selects an input | |
| 1.3.6.1.4.1.35902.1.0.22 | NotificationserverOperationMonitorDelayEvent | current | Notification sent when a monitor delay operation changes | |
| 1.3.6.1.4.1.35902.1.0.23 | NotificationserverOperationHintScte104Event | current | Notification sent when a hint scte104 operation triggers an event | |
| 1.3.6.1.4.1.35902.1.0.24 | NotificationserverFunctionWatermarkDetectEvent | current | Notification sent when a watermark is detected | |
| 1.3.6.1.4.1.35902.1.0.25 | NotificationserverLoggerUp | current | Notification sent when a logger starts | |
| 1.3.6.1.4.1.35902.1.0.26 | NotificationserverLoggerDown | current | Notification sent when a logger stops | |
| 1.3.6.1.4.1.35902.1.0.27 | NotificationserverLinkVideoTxUp | current | Notification sent when a video TX link is inserted | |
| 1.3.6.1.4.1.35902.1.0.28 | NotificationserverLinkVideoTxDown | current | Notification sent when a video TX link is removed | |
| 1.3.6.1.4.1.35902.1.0.29 | NotificationserverOperationHintMetadataEvent | current | Notification sent when a hint metadata operation triggers an event | |
| 1.3.6.1.4.1.35902.1.2 | NodeserverSystem | |||
| 1.3.6.1.4.1.35902.1.2.1 | ScalarserverSystemId | read-only | current | System identifier This string uniquely identifies a server. |
| 1.3.6.1.4.1.35902.1.2.2 | ScalarserverSystemName | read-write | current | System name This string can be assigned freely by the admin, but must be composed of ASCII alphanumeric characters, without spaces. Dashes are also allowed. |
| 1.3.6.1.4.1.35902.1.2.3 | ScalarserverSystemVersion | read-only | current | System version This string identifies the software version running on the server. |
| 1.3.6.1.4.1.35902.1.2.4 | ScalarserverSystemVendor | read-only | current | System vendor This string identifies the vendor of the server. |
| 1.3.6.1.4.1.35902.1.2.5 | ScalarserverSystemROPassword | read-write | current | Read-only password This string configures the password for read-only access to the SNMP and HTTP interfaces. It must be composed of ASCII alphanumeric characte… |
| 1.3.6.1.4.1.35902.1.2.6 | ScalarserverSystemRWPassword | read-write | current | Read-write password This string configures the password for read-write access to the SNMP and HTTP interfaces. |
| 1.3.6.1.4.1.35902.1.2.7 | ScalarserverSystemCommand | read-write | current | Server command |
| 1.3.6.1.4.1.35902.1.2.8 | ScalarserverSystemApplyStatus | read-only | current | Status of the last apply command |
| 1.3.6.1.4.1.35902.1.2.9 | ScalarserverSystemTime | read-write | current | Date and time This string shows or configures the UTC time of the server (unneeded if an NTP server is used). |
| 1.3.6.1.4.1.35902.1.2.10 | ScalarserverSystemLogs | read-only | current | Timestamp of the last change in the logs file. |
| 1.3.6.1.4.1.35902.1.2.11 | ScalarserverSystemLocalAccess | read-write | current | Local Access The menu allows the administrator to prevent people who have a physical access to the system from taking any action. In particular, when this box … |
| 1.3.6.1.4.1.35902.1.2.12 | ScalarserverSystemToken | read-write | current | Unique token used to start non-secure HTTP interfaces. |
| 1.3.6.1.4.1.35902.1.2.13 | ScalarserverSystemWorkflow | read-only | current | Timestamp of the last change in the workflow file. |
| 1.3.6.1.4.1.35902.1.2.14 | TableserverFeatureTable | not-accessible | current | List of features |
| 1.3.6.1.4.1.35902.1.2.14.1 | RowserverFeatureEntry | not-accessible | current | Description of a single feature |
| 1.3.6.1.4.1.35902.1.2.14.1.1 | ColumnserverFeatureIndex | not-accessible | current | Feature index |
| 1.3.6.1.4.1.35902.1.2.14.1.2 | ColumnserverFeatureName | read-only | current | Feature This string shows the name of a particular feature of the server. |
| 1.3.6.1.4.1.35902.1.2.14.1.3 | ColumnserverFeatureStatus | read-only | current | Feature status |
| 1.3.6.1.4.1.35902.1.2.14.1.4 | ColumnserverFeatureNb | read-only | current | Max instances This number shows the maximum number of instances of this feature that can be used. To add more features to your server, contact your vendor. |
| 1.3.6.1.4.1.35902.1.2.14.1.5 | ColumnserverFeatureUsed | read-only | current | Used instances This number shows the number of instances of this feature currently in use. |
| 1.3.6.1.4.1.35902.1.2.15 | TableserverLicenseTable | not-accessible | current | List of licenses |
| 1.3.6.1.4.1.35902.1.2.15.1 | RowserverLicenseEntry | not-accessible | current | Description of a single license |
| 1.3.6.1.4.1.35902.1.2.15.1.1 | ColumnserverLicenseIndex | not-accessible | current | License index |
| 1.3.6.1.4.1.35902.1.2.15.1.2 | ColumnserverLicenseName | read-only | current | License file This string shows the name of the license file. |
| 1.3.6.1.4.1.35902.1.2.15.1.3 | ColumnserverLicenseStatus | read-only | current | License status |
| 1.3.6.1.4.1.35902.1.2.15.1.4 | ColumnserverLicenseDuration | read-only | current | Duration If it is not null, this number shows the maximum duration, in seconds, of the evaluation period for features allowed by this license file. |
| 1.3.6.1.4.1.35902.1.2.15.1.5 | ColumnserverLicenseExpiration | read-only | current | Expiration This field shows the expiration date of the license file, when applicable. |
| 1.3.6.1.4.1.35902.1.2.16 | TableserverSnmpTrapTable | not-accessible | current | List of SNMP trap targets |
| 1.3.6.1.4.1.35902.1.2.16.1 | RowserverSnmpTrapEntry | not-accessible | current | Description of a single SNMP trap target |
| 1.3.6.1.4.1.35902.1.2.16.1.1 | ColumnserverSnmpTrapIndex | not-accessible | current | SNMP trap target index |
| 1.3.6.1.4.1.35902.1.2.16.1.2 | ColumnserverSnmpTrapStatus | read-create | current | SNMP trap target status |
| 1.3.6.1.4.1.35902.1.2.16.1.3 | ColumnserverSnmpTrapType | read-create | current | Trap type This field shows or sets the SNMP trap target type. |
| 1.3.6.1.4.1.35902.1.2.16.1.4 | ColumnserverSnmpTrapUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable/enable a trap target. |
| 1.3.6.1.4.1.35902.1.2.16.1.5 | ColumnserverSnmpTrapDepStatus | read-only | current | Always true |
| 1.3.6.1.4.1.35902.1.2.16.1.6 | ColumnserverSnmpTrapLicenseStatus | read-only | current | True if there is a license which enables this serverSnmpTrap |
| 1.3.6.1.4.1.35902.1.2.16.1.7 | ColumnserverSnmpTrapAddress | read-create | current | IP address This field allows the administrator to enter an IPv4 address to which traps/notifications will be sent. |
| 1.3.6.1.4.1.35902.1.2.16.1.8 | ColumnserverSnmpTrapPort | read-create | current | Port This field allows the administrator to enter a port number on which traps/notifications will be sent (usually 162). |
| 1.3.6.1.4.1.35902.1.2.16.1.9 | ColumnserverSnmpTrapCommunity | read-create | current | Community This field allows the administrator to enter a community string to use when sending a trap/notification. |
| 1.3.6.1.4.1.35902.1.2.17 | TableserverDeviceTable | not-accessible | current | List of devices |
| 1.3.6.1.4.1.35902.1.2.17.1 | RowserverDeviceEntry | not-accessible | current | Description of a single device |
| 1.3.6.1.4.1.35902.1.2.17.1.1 | ColumnserverDeviceIndex | not-accessible | current | Device index |
| 1.3.6.1.4.1.35902.1.2.17.1.2 | ColumnserverDeviceSubsystem | read-only | current | Subsystem This field shows the subsystem the device belongs to. |
| 1.3.6.1.4.1.35902.1.2.17.1.3 | ColumnserverDeviceVendor | read-only | current | Vendor ID This field shows the 16-bit vendor ID associated with the device. |
| 1.3.6.1.4.1.35902.1.2.17.1.4 | ColumnserverDeviceProduct | read-only | current | Product ID This field shows the 16-bit product ID associated with the device. |
| 1.3.6.1.4.1.35902.1.2.17.1.5 | ColumnserverDeviceSerial | read-only | current | Serial number This field shows the serial number of the device, when available. |
| 1.3.6.1.4.1.35902.1.2.18 | TableserverDiskTable | not-accessible | current | List of disks |
| 1.3.6.1.4.1.35902.1.2.18.1 | RowserverDiskEntry | not-accessible | current | Description of a single disk |
| 1.3.6.1.4.1.35902.1.2.18.1.1 | ColumnserverDiskIndex | not-accessible | current | Disk index |
| 1.3.6.1.4.1.35902.1.2.18.1.2 | ColumnserverDiskModel | read-only | current | Model This field shows the model of the disk. |
| 1.3.6.1.4.1.35902.1.2.18.1.3 | ColumnserverDiskSerial | read-only | current | Serial number This field shows the serial number of the disk. |
| 1.3.6.1.4.1.35902.1.2.18.1.4 | ColumnserverDiskSize | read-only | current | Size This field shows the total size of the disk. |
| 1.3.6.1.4.1.35902.1.2.18.1.5 | ColumnserverDiskMounted | read-only | current | In use This field shows whether the disk is currently in use. |
| 1.3.6.1.4.1.35902.1.2.18.1.6 | ColumnserverDiskErase | read-write | current | Set to true to erase all partitions in the disk and repartition the disk for use with the system (USE WITH CAUTION). The disk cannot be erased if mounted. |
| 1.3.6.1.4.1.35902.1.2.19 | NodeserverMail | |||
| 1.3.6.1.4.1.35902.1.2.19.1 | ScalarserverMailRelay | read-write | current | Mail relay This string configures the address of the SMTP server to use for notification (use 0.0.0.0 to disable the notification functionality). |
| 1.3.6.1.4.1.35902.1.2.19.2 | ScalarserverMailFrom | read-write | current | Mail origin This string configures the e-mail address which will be used in the From: field of mail notifications. |
| 1.3.6.1.4.1.35902.1.2.19.3 | ScalarserverMailTo | read-write | current | Mail destination This string configures the e-mail address to which notifications will be sent. |
| 1.3.6.1.4.1.35902.1.2.20 | TableserverCpuTable | not-accessible | current | List of CPUs |
| 1.3.6.1.4.1.35902.1.2.20.1 | RowserverCpuEntry | not-accessible | current | Description of a single CPU |
| 1.3.6.1.4.1.35902.1.2.20.1.1 | ColumnserverCpuIndex | not-accessible | current | CPU index |
| 1.3.6.1.4.1.35902.1.2.20.1.2 | ColumnserverCpuDescription | read-only | current | Description This field shows the description of the CPU. |
| 1.3.6.1.4.1.35902.1.2.21 | NodeserverMemory | |||
| 1.3.6.1.4.1.35902.1.2.21.1 | ScalarserverMemoryTotal | read-only | current | Total size This field shows the total amount of physical memory installed in the system, in octets. |
| 1.3.6.1.4.1.35902.1.2.21.2 | ScalarserverMemoryUnused | read-only | current | Unused This field shows the amount of memory currently unused, in octets. |
| 1.3.6.1.4.1.35902.1.2.21.3 | ScalarserverMemoryBuffers | read-only | current | Buffers This field shows the amount of memory currently used for buffering, in octets. |
| 1.3.6.1.4.1.35902.1.2.21.4 | ScalarserverMemoryCache | read-only | current | Cache This field shows the amount of memory currently used for caching files, in octets. |
| 1.3.6.1.4.1.35902.1.2.21.5 | ScalarserverMemoryAvailable | read-only | current | Available This field shows the amount of memory currently available, in octets. |
| 1.3.6.1.4.1.35902.1.2.22 | ScalarserverSystemConfigLastChange | read-write | current | Timestamp of the last user change in the configuration. |
| 1.3.6.1.4.1.35902.1.2.23 | ScalarserverSystemReleaseDate | read-only | current | Release date This field shows the release of this version of the firmware. |
| 1.3.6.1.4.1.35902.1.2.24 | ScalarserverSystemMaintenance | read-only | current | Maintenance until This field shows the date up to which this system is maintained. Maintenance extensions can be purchased from your vendor. |
| 1.3.6.1.4.1.35902.1.2.25 | ScalarserverSystemHardwareId | read-only | current | Hardware identifier This string uniquely identifies the hardware running the server. |
| 1.3.6.1.4.1.35902.1.2.26 | NodeserverProcessScalars | |||
| 1.3.6.1.4.1.35902.1.2.26.1 | ScalarserverProcessDeleteAfter | read-write | current | Delete after This field shows or sets the number of seconds to wait before deleting a terminated or erroneous process. |
| 1.3.6.1.4.1.35902.1.2.26.2 | ScalarserverProcessMaxRunning | read-write | current | Max running processes This field shows or sets the maximum number of concurrently running processes. |
| 1.3.6.1.4.1.35902.1.2.26.3 | ScalarserverProcessNextIndex | read-only | current | Index of the next creatable process |
| 1.3.6.1.4.1.35902.1.2.26.4 | ScalarserverProcessLogs | read-only | current | Timestamp of the last change in the logs file. |
| 1.3.6.1.4.1.35902.1.2.27 | TableserverSlaveTable | not-accessible | current | List of configuration slaves |
| 1.3.6.1.4.1.35902.1.2.27.1 | RowserverSlaveEntry | not-accessible | current | Description of a single configuration slave |
| 1.3.6.1.4.1.35902.1.2.27.1.1 | ColumnserverSlaveIndex | not-accessible | current | Configuration slave index |
| 1.3.6.1.4.1.35902.1.2.27.1.2 | ColumnserverSlaveStatus | read-create | current | Configuration slave status |
| 1.3.6.1.4.1.35902.1.2.27.1.3 | ColumnserverSlaveType | read-create | current | Slave type This field shows or sets the slave type. |
| 1.3.6.1.4.1.35902.1.2.27.1.4 | ColumnserverSlaveUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable/enable a slave. |
| 1.3.6.1.4.1.35902.1.2.27.1.5 | ColumnserverSlaveDepStatus | read-only | current | Always true |
| 1.3.6.1.4.1.35902.1.2.27.1.6 | ColumnserverSlaveLicenseStatus | read-only | current | True if there is a license which enables this serverSlave |
| 1.3.6.1.4.1.35902.1.2.27.1.7 | ColumnserverSlaveAddress | read-create | current | Address This field allows the administrator to enter the address of the slave. |
| 1.3.6.1.4.1.35902.1.2.27.1.8 | ColumnserverSlavePassword | read-create | current | Community This field allows the administrator to enter the password of the slave. |
| 1.3.6.1.4.1.35902.1.2.28 | ScalarserverSystemLocation | read-write | current | Server Location The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
| 1.3.6.1.4.1.35902.1.2.29 | ScalarserverSystemKantarMediaDeviceId | read-only | current | Kantar Media device identifier This string uniquely identifies the device for Kantar Media licenses. |
| 1.3.6.1.4.1.35902.1.2.30 | ScalarserverLicenseServer | read-write | current | License server This string configures the license server address. You may specify a DNS name or port (For instance mylicenseserver:4443). By default, the licen… |
| 1.3.6.1.4.1.35902.1.2.31 | TableserverLicenseClientTable | not-accessible | current | List of remote license clients |
| 1.3.6.1.4.1.35902.1.2.31.1 | RowserverLicenseClientEntry | not-accessible | current | Description of a single remote license client |
| 1.3.6.1.4.1.35902.1.2.31.1.1 | ColumnserverLicenseClientIndex | not-accessible | current | Remote license client index |
| 1.3.6.1.4.1.35902.1.2.31.1.2 | ColumnserverLicenseClientStatus | read-create | current | Client status |
| 1.3.6.1.4.1.35902.1.2.31.1.3 | ColumnserverLicenseClientType | read-create | current | License client type This field shows or sets the remote license client type. |
| 1.3.6.1.4.1.35902.1.2.31.1.4 | ColumnserverLicenseClientUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable/enable a remote license client. |
| 1.3.6.1.4.1.35902.1.2.31.1.5 | ColumnserverLicenseClientDepStatus | read-only | current | Always true |
| 1.3.6.1.4.1.35902.1.2.31.1.6 | ColumnserverLicenseClientLicenseStatus | read-only | current | True if there is a license which enables this client license |
| 1.3.6.1.4.1.35902.1.2.31.1.7 | ColumnserverLicenseClientName | read-create | current | Label Informative name of the client. |
| 1.3.6.1.4.1.35902.1.2.31.1.8 | ColumnserverLicenseClientHardwareId | read-create | current | Hardware ID Client hardware identifier found in System maintenance. |
| 1.3.6.1.4.1.35902.1.2.31.1.9 | ColumnserverLicenseClientLastReport | read-only | current | Last report Client last report date and time. |
| 1.3.6.1.4.1.35902.1.2.31.1.10 | ColumnserverLicenseClientLastFeatures | read-only | current | Last features Client last features used. |
| 1.3.6.1.4.1.35902.1.2.31.1.11 | ColumnserverLicenseClientLink | read-create | current | Storage link This field references an entry in the storage link table, on which this client report is written to. |
| 1.3.6.1.4.1.35902.1.2.31.1.12 | ColumnserverLicenseClientChunkDuration | read-create | current | Chunk duration This field shows or sets the duration of a client report chunk, in seconds (default: 86400). Chunks can only be removed or added atomically, so … |
| 1.3.6.1.4.1.35902.1.2.31.1.13 | ColumnserverLicenseClientChunks | read-create | current | Number of chunks This field shows or sets the number of chunks which are to be kept at all time. The minimum time retention of a client report is therefore chu… |
| 1.3.6.1.4.1.35902.1.2.31.1.14 | ColumnserverLicenseClientOldestChunk | read-only | current | Oldest chunk This field shows or sets the creation date of the oldest available chunk. |
| 1.3.6.1.4.1.35902.1.2.31.1.15 | ColumnserverLicenseClientChunkOffset | read-create | current | Chunk offset This field shows or sets the offset of a stream chunk, in percentage (default: random). On a single storage, chunks should all have different offs… |
| 1.3.6.1.4.1.35902.1.2.32 | TableserverLicenseClientFeatureTable | not-accessible | current | List of remote license features |
| 1.3.6.1.4.1.35902.1.2.32.1 | RowserverLicenseClientFeatureEntry | not-accessible | current | Description of a single remote license feature |
| 1.3.6.1.4.1.35902.1.2.32.1.1 | ColumnserverLicenseClientFeatureIndex | not-accessible | current | Remote license feature index |
| 1.3.6.1.4.1.35902.1.2.32.1.2 | ColumnserverLicenseClientFeatureStatus | read-create | current | License feature status |
| 1.3.6.1.4.1.35902.1.2.32.1.3 | ColumnserverLicenseClientFeatureType | read-create | current | License feature type This field shows or sets the remote license feature type. |
| 1.3.6.1.4.1.35902.1.2.32.1.4 | ColumnserverLicenseClientFeatureUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable/enable a remote license feature. |
| 1.3.6.1.4.1.35902.1.2.32.1.5 | ColumnserverLicenseClientFeatureDepStatus | read-only | current | Always true |
| 1.3.6.1.4.1.35902.1.2.32.1.6 | ColumnserverLicenseClientFeatureLicenseStatus | read-only | current | True if there is a license which enables this client license |
| 1.3.6.1.4.1.35902.1.2.32.1.7 | ColumnserverLicenseClientFeatureLicenseIndex | read-create | current | License index This field references a license to which this feature is bound. |
| 1.3.6.1.4.1.35902.1.2.32.1.8 | ColumnserverLicenseClientFeatureNb | read-create | current | Instances The number of instances of this feature that will be used. To add more features to your server, contact your vendor. |
| 1.3.6.1.4.1.35902.1.2.33 | ScalarserverLicenseServerBackup | read-write | current | Backup license server This string configures the backup license server address. You may specify a DNS name or port (For instance mylicenseserver:4443). By defa… |
| 1.3.6.1.4.1.35902.1.2.34 | TableserverUserTable | not-accessible | current | List of users |
| 1.3.6.1.4.1.35902.1.2.34.1 | RowserverUserEntry | not-accessible | current | Description of a single user |
| 1.3.6.1.4.1.35902.1.2.34.1.1 | ColumnserverUserIndex | not-accessible | current | User index |
| 1.3.6.1.4.1.35902.1.2.34.1.2 | ColumnserverUserStatus | read-create | current | User status |
| 1.3.6.1.4.1.35902.1.2.34.1.3 | ColumnserverUserType | read-create | current | User type This field shows or sets the user type. |
| 1.3.6.1.4.1.35902.1.2.34.1.4 | ColumnserverUserUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable/enable a user. |
| 1.3.6.1.4.1.35902.1.2.34.1.5 | ColumnserverUserDepStatus | read-only | current | Always true |
| 1.3.6.1.4.1.35902.1.2.34.1.6 | ColumnserverUserLicenseStatus | read-only | current | True if there is a license which enables this user |
| 1.3.6.1.4.1.35902.1.2.34.1.7 | ColumnserverUserName | read-create | current | Name This string shows or sets the name of the user. |
| 1.3.6.1.4.1.35902.1.2.34.1.8 | ColumnserverUserPassword | read-create | current | Password This field shows or sets the user password. |
| 1.3.6.1.4.1.35902.1.2.34.1.9 | ColumnserverUserData | read-create | current | User data This field shows or sets the generic user data. This data is reserved for usage by the administrator. |
| 1.3.6.1.4.1.35902.1.2.34.1.10 | ColumnserverUserLdapGroup | read-create | current | LDAP group This field shows or sets the LDAP group DN corresponding to this user. This is used by the LDAP authentication procedure to provide access rights to… |
| 1.3.6.1.4.1.35902.1.2.35 | TableserverGpioTable | not-accessible | current | List of GPIOs |
| 1.3.6.1.4.1.35902.1.2.35.1 | RowserverGpioEntry | not-accessible | current | Description of a single GPIO |
| 1.3.6.1.4.1.35902.1.2.35.1.1 | ColumnserverGpioIndex | not-accessible | current | GPIO index |
| 1.3.6.1.4.1.35902.1.2.35.1.2 | ColumnserverGpioStatus | read-create | current | GPIO status |
| 1.3.6.1.4.1.35902.1.2.35.1.3 | ColumnserverGpioType | read-create | current | GPIO type |
| 1.3.6.1.4.1.35902.1.2.35.1.4 | ColumnserverGpioUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a GPIO. |
| 1.3.6.1.4.1.35902.1.2.35.1.5 | ColumnserverGpioDepStatus | read-only | current | True if the GPIO actually exists |
| 1.3.6.1.4.1.35902.1.2.35.1.6 | ColumnserverGpioLicenseStatus | read-only | current | True if there is a license which enables this GPIO |
| 1.3.6.1.4.1.35902.1.2.35.1.7 | ColumnserverGpioChipName | read-only | current | Chip name This field shows the GPIO chip name. |
| 1.3.6.1.4.1.35902.1.2.35.1.8 | ColumnserverGpioOffset | read-only | current | Line offset This field shows the GPIO line offset. |
| 1.3.6.1.4.1.35902.1.2.35.1.9 | ColumnserverGpioName | read-only | current | Name This field shows the GPIO name. |
| 1.3.6.1.4.1.35902.1.2.35.1.10 | ColumnserverGpioDirection | read-create | current | Direction This field shows the GPIO direction. |
| 1.3.6.1.4.1.35902.1.2.35.1.11 | ColumnserverGpioActiveLow | read-create | current | Active low This field shows or sets the GPIO configuration active low. |
| 1.3.6.1.4.1.35902.1.2.35.1.12 | ColumnserverGpioOpenDrain | read-create | current | Open drain This field shows or sets the GPIO configuration open drain. |
| 1.3.6.1.4.1.35902.1.2.35.1.13 | ColumnserverGpioOpenSource | read-create | current | Open source This field shows or sets the GPIO configuration open source. |
| 1.3.6.1.4.1.35902.1.2.35.1.14 | ColumnserverGpioValue | read-create | current | Value This field shows or sets the GPIO value. |
| 1.3.6.1.4.1.35902.1.2.35.1.15 | ColumnserverGpioDownScheduleIndex | read-create | current | Down schedule This field references an entry in the schedule table, which is triggered when the GPIO goes down (if not null). |
| 1.3.6.1.4.1.35902.1.2.35.1.16 | ColumnserverGpioUpScheduleIndex | read-create | current | Up schedule This field references an entry in the schedule table, which is triggered when the GPIO goes up (if not null). |
| 1.3.6.1.4.1.35902.1.2.36 | NodeserverLicenseReport | |||
| 1.3.6.1.4.1.35902.1.2.36.1 | ScalarserverLicenseReportLink | read-write | current | Storage link This field references an entry in the storage link table, on which the client reports are written to. This may be useful to keep track of deleted … |
| 1.3.6.1.4.1.35902.1.2.36.2 | ScalarserverLicenseReportChunkDuration | read-write | current | Chunk duration This field shows or sets the duration of a client report chunk, in seconds (default: 86400). Chunks can only be removed or added atomically, so … |
| 1.3.6.1.4.1.35902.1.2.36.3 | ScalarserverLicenseReportChunks | read-write | current | Number of chunks This field shows or sets the number of chunks which are to be kept at all time. The minimum time retention of a client report is therefore chu… |
| 1.3.6.1.4.1.35902.1.2.36.4 | ScalarserverLicenseReportOldestChunk | read-only | current | Oldest chunk This field shows or sets the creation date of the oldest available chunk. |
| 1.3.6.1.4.1.35902.1.2.37 | NodeserverLdap | |||
| 1.3.6.1.4.1.35902.1.2.37.1 | ScalarserverLdapServerURL | read-write | current | Server URL This field shows or sets the LDAP server URL (ldap|ldaps://server[:port]). Default port value is 389 for LDAP or 636 for LDAPS (LDAP over SSL/TLS). |
| 1.3.6.1.4.1.35902.1.2.37.2 | ScalarserverLdapStartTLS | read-write | current | STARTTLS This field shows or sets whether to use the STARTTLS protocol extension instead of LDAPS for secure communication with the LDAP server. |
| 1.3.6.1.4.1.35902.1.2.37.3 | ScalarserverLdapServiceAccount | read-write | current | Service account This field shows or sets the service account DN used to make an authenticated bind to the LDAP server. Leave empty for anonymous binding. |
| 1.3.6.1.4.1.35902.1.2.37.4 | ScalarserverLdapPassword | read-write | current | Password This field sets the password for the service account. |
| 1.3.6.1.4.1.35902.1.2.37.5 | ScalarserverLdapSearchBase | read-write | current | Search base This field shows or sets the search base DN where user entries live. |
| 1.3.6.1.4.1.35902.1.2.37.6 | ScalarserverLdapUserFilter | read-write | current | User filter This field shows or sets the query template used to search for a specific user. The user variable will be replaced with the login name, for example… |
| 1.3.6.1.4.1.35902.1.2.37.7 | ScalarserverLdapGroupAttribute | read-write | current | Group attribute This field shows or sets the attribute name which defines the groups a LDAP user belongs to (e.g. memberOf). |
| 1.3.6.1.4.1.35902.1.3 | NodeserverLink | |||
| 1.3.6.1.4.1.35902.1.3.1 | NodelinkNet | |||
| 1.3.6.1.4.1.35902.1.3.1.1 | TablelinkNetTable | not-accessible | current | List of configured network links |
| 1.3.6.1.4.1.35902.1.3.1.1.1 | RowlinkNetEntry | not-accessible | current | Properties for a single configured network link |
| 1.3.6.1.4.1.35902.1.3.1.1.1.1 | ColumnlinkNetIndex | not-accessible | current | Network link index |
| 1.3.6.1.4.1.35902.1.3.1.1.1.2 | ColumnlinkNetStatus | read-create | current | Interface status |
| 1.3.6.1.4.1.35902.1.3.1.1.1.3 | ColumnlinkNetUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.4 | ColumnlinkNetDepStatus | read-only | current | True if the interface is running |
| 1.3.6.1.4.1.35902.1.3.1.1.1.5 | ColumnlinkNetLicenseStatus | read-only | current | True if there is a license which enables this interface |
| 1.3.6.1.4.1.35902.1.3.1.1.1.6 | ColumnlinkNetIfDescr | read-create | current | Interface name This string shows or sets the Linux interface name for this network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.7 | ColumnlinkNetIfIndex | read-only | current | Interface index This field show the Linux interface index associated with this network link (or 0 if the interface is not available). |
| 1.3.6.1.4.1.35902.1.3.1.1.1.8 | ColumnlinkNetPhysAddr | read-only | current | Physical address This field shows the physical address (typically MAC) of the interface associated with this network link, when applicable. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.9 | ColumnlinkNetPhysLink | read-create | current | Physical link mode This field allows the administrator to configure the link mode of the interface associated with this network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.10 | ColumnlinkNetType | read-create | current | Assignment mode This field allows the administrator to configure the assignment mode of the network configuration of this link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.11 | ColumnlinkNetAddr | read-create | current | IP address This field shows or sets (in static mode) the IPv4 address of this network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.12 | ColumnlinkNetNetmask | read-create | current | Netmask This field shows or sets (in static mode) the IPv4 netmask of this network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.13 | ColumnlinkNetGateway | read-create | current | Gateway This field shows or sets the IPv4 gateway of this network link. A route can also be dynamically acquired if the interface is configured as DHCP. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.14 | ColumnlinkNetMTU | read-create | current | MTU This field shows or sets the maximum size of packets on this network link. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.15 | ColumnlinkNetConnected | read-only | current | Connected This field shows whether the physical link is currently up. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.16 | ColumnlinkNetName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.17 | ColumnlinkNetBondMode | read-create | current | Bonding mode This field shows or sets the bonding mode of the interface. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.18 | ColumnlinkNetBondSlaves | read-create | current | Bonding slaves This field lists the slave interfaces, separated by spaces, that compose the bonding interface. It is only valid if the interface is a bonding i… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.19 | ColumnlinkNetBondMiimon | read-create | current | Bonding monitoring interval This field shows or sets the interval, in milliseconds, between checks of the MII link status of each slave interface. It is only v… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.20 | ColumnlinkNetBondUpDelay | read-create | current | Bonding up delay This field shows or sets the interval, in milliseconds, after which a slave interface starts being used after going up. It is only valid if th… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.21 | ColumnlinkNetBondDownDelay | read-create | current | Bonding down delay This field shows or sets the interval, in milliseconds, after which a slave interface stops being used after going down. It is only valid if… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.22 | ColumnlinkNetCommand | read-create | current | Additional command This string shows or sets a keyword and an additional Linux command that will be run on certain time. Use only when instructed so by the sup… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.23 | ColumnlinkNetDisabledAtStartup | read-create | current | Disabled at startup When enabled, the network link is disabled when the server starts up. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.24 | ColumnlinkNetWireGuardPrivateKey | read-create | current | WireGuard private key This string shows or sets the WireGuard base64 private key for this interface. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.25 | ColumnlinkNetWireGuardPublicKey | read-only | current | WireGuard public key This string shows the WireGuard base64 public key for this interface. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.26 | ColumnlinkNetWireGuardListenPort | read-create | current | WireGuard listen port This string shows or sets the UDP port used by this tunnel interface. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.27 | ColumnlinkNetWireGuardPeer | read-create | current | WireGuard peer This string shows or sets the base64 public key for the remote peer. |
| 1.3.6.1.4.1.35902.1.3.1.1.1.28 | ColumnlinkNetWireGuardPresharedKey | read-create | current | WireGuard pre-shared key This string shows or sets the base64 pre-shared key for this peer. This is optional, and may be omitted. This option adds an additiona… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.29 | ColumnlinkNetWireGuardAllowedIPs | read-create | current | WireGuard allowed IPs This string shows or sets a comma-separated list of IPv4 addresses with CIDR masks from which incoming traffic for this peer is allowed a… |
| 1.3.6.1.4.1.35902.1.3.1.1.1.30 | ColumnlinkNetWireGuardEndpoint | read-create | current | WireGuard endpoint This string shows or sets the initial remote endpoint for this peer. This is optional. If specified, it must include an endpoint IP or hostn… |
| 1.3.6.1.4.1.35902.1.3.1.2 | ScalarlinkNetDefaultInterfaceIndex | read-write | current | Default interface This field shows or sets the interface whose gateway will be used for management services (NTP, SNMP traps) when remote hosts aren't on local… |
| 1.3.6.1.4.1.35902.1.3.1.3 | ScalarlinkNetDomains | read-write | current | Search domains This string configures the search domains, separated by spaces (if not empty). |
| 1.3.6.1.4.1.35902.1.3.1.4 | ScalarlinkNetNTP | read-write | current | NTP server This string configures the address of the NTP server (or empty to disable the NTP functionality). |
| 1.3.6.1.4.1.35902.1.3.1.5 | ScalarlinkNetDNS1 | read-write | current | DNS 1 This string configures the address of the first DNS server (use 0.0.0.0 to disable the DNS functionality). |
| 1.3.6.1.4.1.35902.1.3.1.6 | ScalarlinkNetDNS2 | read-write | current | DNS 2 This string configures the address of the second DNS server (use 0.0.0.0 to disable the DNS functionality). |
| 1.3.6.1.4.1.35902.1.3.1.7 | ScalarlinkNetNTPOffset | read-only | current | NTP offset This shows the current offset with the NTP server in microseconds. |
| 1.3.6.1.4.1.35902.1.3.1.8 | ScalarlinkNetSyslog | read-write | current | Syslog server This string configures the address of the remote syslog server (or empty to disable the syslog functionality). |
| 1.3.6.1.4.1.35902.1.3.1.9 | ScalarlinkNetHttpProxy | read-write | current | HTTP proxy This field shows or sets the HTTP proxy (protocol://[username:password@]host[:port]) used for client license requests. |
| 1.3.6.1.4.1.35902.1.3.2 | TablelinkDvbTable | not-accessible | current | List of DVB links |
| 1.3.6.1.4.1.35902.1.3.2.1 | RowlinkDvbEntry | not-accessible | current | Properties for a single DVB link |
| 1.3.6.1.4.1.35902.1.3.2.1.1 | ColumnlinkDvbIndex | not-accessible | current | DVB link index |
| 1.3.6.1.4.1.35902.1.3.2.1.2 | ColumnlinkDvbStatus | read-create | current | DVB link status |
| 1.3.6.1.4.1.35902.1.3.2.1.3 | ColumnlinkDvbUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a DVB link. |
| 1.3.6.1.4.1.35902.1.3.2.1.4 | ColumnlinkDvbDepStatus | read-only | current | True if the link actually exists |
| 1.3.6.1.4.1.35902.1.3.2.1.5 | ColumnlinkDvbLicenseStatus | read-only | current | True if there is a license which enables this link |
| 1.3.6.1.4.1.35902.1.3.2.1.6 | ColumnlinkDvbType | read-only | current | Frontend type This field shows the type of the frontend currently in use by the DVB link. |
| 1.3.6.1.4.1.35902.1.3.2.1.7 | ColumnlinkDvbNbFrontends | read-only | current | Number of frontends This number shows the number of frontends available for this DVB link. |
| 1.3.6.1.4.1.35902.1.3.2.1.8 | ColumnlinkDvbFrontend | read-create | current | Frontend index This number shows and sets the frontend currently in use by the DVB link (from 1 to the number of frontends). |
| 1.3.6.1.4.1.35902.1.3.2.1.9 | ColumnlinkDvbFrontendProduct | read-only | current | Frontend name This string specifies the type and model of the chip the current frontend uses. |
| 1.3.6.1.4.1.35902.1.3.2.1.10 | ColumnlinkDvbStructure | read-only | current | Connected to This string gives information on the currently connected input. |
| 1.3.6.1.4.1.35902.1.3.2.1.11 | ColumnlinkDvbFrequencyMin | read-only | current | Min frequency This field shows the lowest BIS frequency this frontend can tune to (in kHz for satellite frontends, in Hz for other frontends). |
| 1.3.6.1.4.1.35902.1.3.2.1.12 | ColumnlinkDvbFrequencyMax | read-only | current | Max frequency This field shows the highest BIS frequency this frontend can tune to (in kHz for satellite frontends, in Hz for other frontends). |
| 1.3.6.1.4.1.35902.1.3.2.1.13 | ColumnlinkDvbSRateMin | read-only | current | Min symbol rate This field shows the lowest symbol rate this frontend can tune to. |
| 1.3.6.1.4.1.35902.1.3.2.1.14 | ColumnlinkDvbSRateMax | read-only | current | Max symbol rate This field shows the highest symbol rate this frontend can tune to. |
| 1.3.6.1.4.1.35902.1.3.2.1.15 | ColumnlinkDvbSRateTolerance | read-only | current | Symbol rate tolerance This field shows the tolerance (in ppm) for the symbol rate value of this frontend. |
| 1.3.6.1.4.1.35902.1.3.2.1.16 | ColumnlinkDvbName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.3 | TablelinkStorageTable | not-accessible | current | List of storage links |
| 1.3.6.1.4.1.35902.1.3.3.1 | RowlinkStorageEntry | not-accessible | current | Properties for a single storage link |
| 1.3.6.1.4.1.35902.1.3.3.1.1 | ColumnlinkStorageIndex | not-accessible | current | Storage link index |
| 1.3.6.1.4.1.35902.1.3.3.1.2 | ColumnlinkStorageStatus | read-create | current | Storage link status |
| 1.3.6.1.4.1.35902.1.3.3.1.3 | ColumnlinkStorageUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a storage link. |
| 1.3.6.1.4.1.35902.1.3.3.1.4 | ColumnlinkStorageDepStatus | read-only | current | True if the link is currently mounted |
| 1.3.6.1.4.1.35902.1.3.3.1.5 | ColumnlinkStorageLicenseStatus | read-only | current | True if there is a license which enables this link |
| 1.3.6.1.4.1.35902.1.3.3.1.6 | ColumnlinkStorageConnected | read-only | current | Connected This field shows whether the link is currently connected. If it is also enabled but down, it is currently being mounted. |
| 1.3.6.1.4.1.35902.1.3.3.1.7 | ColumnlinkStorageType | read-create | current | Storage type This field shows the type of the storage link. |
| 1.3.6.1.4.1.35902.1.3.3.1.8 | ColumnlinkStorageServer | read-create | current | Server This field shows or sets the IP address of the server owning the storage, if applicable. |
| 1.3.6.1.4.1.35902.1.3.3.1.9 | ColumnlinkStorageUser | read-create | current | Login This field shows or sets the user name which may be required to access a distant storage. |
| 1.3.6.1.4.1.35902.1.3.3.1.10 | ColumnlinkStoragePassword | read-create | current | Password This field shows or sets the password which may be required to access a distant storage. |
| 1.3.6.1.4.1.35902.1.3.3.1.11 | ColumnlinkStorageURI | read-create | current | Storage URI This field shows or sets, depending on the type, the local UUID of the partition, or the export name of the distant storage. |
| 1.3.6.1.4.1.35902.1.3.3.1.12 | ColumnlinkStorageSize | read-only | current | Size This field shows the size (in bytes) of the storage, or 0 if unavailable. |
| 1.3.6.1.4.1.35902.1.3.3.1.13 | ColumnlinkStorageAvailable | read-only | current | Available This field shows the available size (in bytes) of the storage, or 0 if unavailable. |
| 1.3.6.1.4.1.35902.1.3.3.1.14 | ColumnlinkStorageOptions | read-create | current | Mount options This field shows or sets the mount options which may be required to access a distant storage. |
| 1.3.6.1.4.1.35902.1.3.3.1.15 | ColumnlinkStorageName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.4 | TablelinkAsiRxTable | not-accessible | current | List of DVB-ASI RX links |
| 1.3.6.1.4.1.35902.1.3.4.1 | RowlinkAsiRxEntry | not-accessible | current | Properties for a single DVB-ASI RX link |
| 1.3.6.1.4.1.35902.1.3.4.1.1 | ColumnlinkAsiRxIndex | not-accessible | current | DVB-ASI RX link index |
| 1.3.6.1.4.1.35902.1.3.4.1.2 | ColumnlinkAsiRxStatus | read-create | current | DVB-ASI RX link status |
| 1.3.6.1.4.1.35902.1.3.4.1.3 | ColumnlinkAsiRxUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a DVB-ASI RX link. |
| 1.3.6.1.4.1.35902.1.3.4.1.4 | ColumnlinkAsiRxDepStatus | read-only | current | True if the link actually exists |
| 1.3.6.1.4.1.35902.1.3.4.1.5 | ColumnlinkAsiRxLicenseStatus | read-only | current | True if there is a license which enables this link |
| 1.3.6.1.4.1.35902.1.3.4.1.6 | ColumnlinkAsiRxType | read-only | current | Type This field shows the type of the DVB-ASI RX link. |
| 1.3.6.1.4.1.35902.1.3.4.1.7 | ColumnlinkAsiRxName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.5 | TablelinkVideoRxTable | not-accessible | current | List of video RX links |
| 1.3.6.1.4.1.35902.1.3.5.1 | RowlinkVideoRxEntry | not-accessible | current | Properties for a single video RX link |
| 1.3.6.1.4.1.35902.1.3.5.1.1 | ColumnlinkVideoRxIndex | not-accessible | current | Video RX link index |
| 1.3.6.1.4.1.35902.1.3.5.1.2 | ColumnlinkVideoRxStatus | read-create | current | Video RX link status |
| 1.3.6.1.4.1.35902.1.3.5.1.3 | ColumnlinkVideoRxUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a video RX link. |
| 1.3.6.1.4.1.35902.1.3.5.1.4 | ColumnlinkVideoRxDepStatus | read-only | current | True if the link actually exists |
| 1.3.6.1.4.1.35902.1.3.5.1.5 | ColumnlinkVideoRxLicenseStatus | read-only | current | True if there is a license which enables this link |
| 1.3.6.1.4.1.35902.1.3.5.1.6 | ColumnlinkVideoRxType | read-only | current | Type This field shows the type of the video RX link. |
| 1.3.6.1.4.1.35902.1.3.5.1.7 | ColumnlinkVideoRxName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.5.1.8 | ColumnlinkVideoRxID | read-create | current | Topology ID This ID represents the physical device in the API. |
| 1.3.6.1.4.1.35902.1.3.5.1.9 | ColumnlinkVideoRxModel | read-only | current | Model This shows the detected model of the link. |
| 1.3.6.1.4.1.35902.1.3.6 | TablelinkVideoTxTable | not-accessible | current | List of video TX links |
| 1.3.6.1.4.1.35902.1.3.6.1 | RowlinkVideoTxEntry | not-accessible | current | Properties for a single video TX link |
| 1.3.6.1.4.1.35902.1.3.6.1.1 | ColumnlinkVideoTxIndex | not-accessible | current | Video TX link index |
| 1.3.6.1.4.1.35902.1.3.6.1.2 | ColumnlinkVideoTxStatus | read-create | current | Video TX link status |
| 1.3.6.1.4.1.35902.1.3.6.1.3 | ColumnlinkVideoTxUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a video TX link. |
| 1.3.6.1.4.1.35902.1.3.6.1.4 | ColumnlinkVideoTxDepStatus | read-only | current | True if the link actually exists |
| 1.3.6.1.4.1.35902.1.3.6.1.5 | ColumnlinkVideoTxLicenseStatus | read-only | current | True if there is a license which enables this link |
| 1.3.6.1.4.1.35902.1.3.6.1.6 | ColumnlinkVideoTxType | read-only | current | Type This field shows the type of the video TX link. |
| 1.3.6.1.4.1.35902.1.3.6.1.7 | ColumnlinkVideoTxName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.3.6.1.8 | ColumnlinkVideoTxID | read-create | current | Topology ID This ID represents the physical device in the API. |
| 1.3.6.1.4.1.35902.1.3.6.1.9 | ColumnlinkVideoTxModel | read-only | current | Model This shows the detected model of the link. |
| 1.3.6.1.4.1.35902.1.4 | NodeserverNode | |||
| 1.3.6.1.4.1.35902.1.4.1 | TablenodeTable | not-accessible | current | List of configured nodes |
| 1.3.6.1.4.1.35902.1.4.1.1 | RownodeEntry | not-accessible | current | Properties for a single configured node |
| 1.3.6.1.4.1.35902.1.4.1.1.1 | ColumnnodeIndex | not-accessible | current | Node index |
| 1.3.6.1.4.1.35902.1.4.1.1.2 | ColumnnodeStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.4.1.1.3 | ColumnnodeType | read-create | current | Node type |
| 1.3.6.1.4.1.35902.1.4.1.1.4 | ColumnnodeUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a node. |
| 1.3.6.1.4.1.35902.1.4.1.1.5 | ColumnnodeDepStatus | read-only | current | True if the node has no dependency problem on a link |
| 1.3.6.1.4.1.35902.1.4.1.1.6 | ColumnnodeLicenseStatus | read-only | current | True if there is a license which enables this node |
| 1.3.6.1.4.1.35902.1.4.1.1.7 | ColumnnodeName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.4.1.1.8 | ColumnnodeStructure | read-only | current | Structure This string gives information on the current internal structure of the node. |
| 1.3.6.1.4.1.35902.1.4.1.1.9 | ColumnnodeLastCleared | read-create | current | Last cleared This field shows the last time the counters were cleared. |
| 1.3.6.1.4.1.35902.1.4.2 | TablenodeNetTable | not-accessible | current | List of configured net nodes |
| 1.3.6.1.4.1.35902.1.4.2.1 | RownodeNetEntry | not-accessible | current | Properties for a single configured net node |
| 1.3.6.1.4.1.35902.1.4.2.1.1 | ColumnnodeNetLink | read-write | current | Network link This field references an entry in the network links table, to which this node is bound. |
| 1.3.6.1.4.1.35902.1.4.2.1.2 | ColumnnodeAddress | read-write | current | Address This field shows or sets the address to which or from which packets are sent/received. It is typically a multicast address (224.0.0.0 - 239.255.255.255… |
| 1.3.6.1.4.1.35902.1.4.2.1.3 | ColumnnodePort | read-write | current | Port This field shows or sets the port to which or from which packets are sent/received. Typical values for this field are 1234, 300x, but it can be chosen fre… |
| 1.3.6.1.4.1.35902.1.4.2.1.4 | ColumnnodeTTL | read-write | current | TTL When the node is used as an output node, and the address is in the multicast range, this field shows/sets the TTL (time to live) of outgoing packets. The T… |
| 1.3.6.1.4.1.35902.1.4.2.1.5 | ColumnnodeTOS | read-write | current | TOS When the node is used as an output node, this fields specifies the TOS (type of service) field of the IP header of outgoing packets. TOS fields are typical… |
| 1.3.6.1.4.1.35902.1.4.2.1.6 | ColumnnodeRTP | read-write | current | RTP This menu specifies whether an RTP header is present in every packet of the stream. It may have to be disabled for compatibility with older devices. |
| 1.3.6.1.4.1.35902.1.4.2.1.7 | ColumnnodeRTPSSRC | read-write | current | RTP SRC When the RTP mode is used, this field specifies the address placed in the Synchronization SouRCe field of the RTP header. It is typically the IP addres… |
| 1.3.6.1.4.1.35902.1.4.2.1.8 | ColumnnodeMTU | read-write | current | MTU This field shows or sets the maximum size of packets from this node. It should no be greater than the MTU of the network link. |
| 1.3.6.1.4.1.35902.1.4.2.1.9 | ColumnnodeBitrate | read-only | current | Current bitrate This field shows the current bitrate of the node (0 if not available). |
| 1.3.6.1.4.1.35902.1.4.2.1.10 | ColumnnodeSrcAddr | read-write | current | Source address This field shows or sets the address from which packets appear to be sent, for output nodes. By default (0.0.0.0), the local address of the inte… |
| 1.3.6.1.4.1.35902.1.4.2.1.11 | ColumnnodeSrcPort | read-write | current | Source Port This field shows or sets the port from which packets appear to be sent, for output nodes. For input nodes in IGMPv3 mode, this allows to bind to th… |
| 1.3.6.1.4.1.35902.1.4.2.1.12 | ColumnnodeNetConformance | read-write | current | TS conformance This field shows or sets the TS conformance to which the stream complies. For output nodes, mandatory tables will be generated (unless no tables… |
| 1.3.6.1.4.1.35902.1.4.2.1.13 | ColumnnodeNetProcess | read-write | current | Processing support When this is enabled, the net node will be analysed for MPEG tables, PIDs and bitrate. Enable this option if you plan to use it as the input… |
| 1.3.6.1.4.1.35902.1.4.2.1.14 | ColumnnodeNetErrorsInvalid | read-only | current | Invalid packets rate This field shows the current rate of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.15 | ColumnnodeNetErrorsDisc | read-only | current | Discontinuities rate This field shows the current rate of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.16 | ColumnnodeNetErrorsTransport | read-only | current | Transport errors rate This field shows the current rate of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.17 | ColumnnodeNetTimeout | read-write | current | Timeout This field shows or sets the amount of time of silence, in milliseconds, after which the stream is considered down. |
| 1.3.6.1.4.1.35902.1.4.2.1.18 | ColumnnodeNetErrorsInvalidCount | read-only | current | Invalid packets This field shows the current count of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.19 | ColumnnodeNetErrorsDiscCount | read-only | current | Discontinuities This field shows the current count of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.20 | ColumnnodeNetErrorsTransportCount | read-only | current | Transport errors This field shows the current count of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.2.1.21 | ColumnnodeNetCiDeviceIndex | read-write | current | CI device This field references an entry in the CI device table, which is used for descrambling input stream. The node must be used as an input of a demux func… |
| 1.3.6.1.4.1.35902.1.4.2.1.22 | ColumnnodeNetCAMName | read-only | current | CAM name This field shows the name of the CAM module inserted into the CI adapter used by the net node to descramble input. |
| 1.3.6.1.4.1.35902.1.4.3 | TablenodeDvbTable | not-accessible | current | List of configured DVB nodes |
| 1.3.6.1.4.1.35902.1.4.3.1 | RownodeDvbEntry | not-accessible | current | Properties for a single configured DVB node |
| 1.3.6.1.4.1.35902.1.4.3.1.1 | ColumnnodeDvbLink | read-write | current | DVB link This field references an entry in the DVB link table, to which this node is bound to. Only one DVB node may be bound to a specific DVB link. A DVB nod… |
| 1.3.6.1.4.1.35902.1.4.3.1.2 | ColumnnodeDvbDelivery | read-write | current | Delivery system This field specifies the delivery system which is configured into the frontend. |
| 1.3.6.1.4.1.35902.1.4.3.1.3 | ColumnnodeDvbFrequency | read-write | current | Frequency This number shows or sets the frequency to which the frontend is tuned (in kHz for satellite frontends, in Hz for other frontends). |
| 1.3.6.1.4.1.35902.1.4.3.1.4 | ColumnnodeDvbSRate | read-write | current | Symbol rate This number shows or sets the symbol rate of the multiplex to which the frontend is tuned (in symbols/s). It only applies to DVB-S, DVB-S2 and DVB-… |
| 1.3.6.1.4.1.35902.1.4.3.1.5 | ColumnnodeDvbModulation | read-write | current | Modulation This field shows or sets the transport modulation used by the multiplex to which the frontend is tuned. |
| 1.3.6.1.4.1.35902.1.4.3.1.6 | ColumnnodeDvbBandwidth | read-write | current | Channel bandwidth This field shows or sets the bandwidth of the DVB-T channel to which the frontend is tuned. It doesn't apply to other system deliveries. |
| 1.3.6.1.4.1.35902.1.4.3.1.7 | ColumnnodeDvbTransmission | read-write | current | Transmission mode This field shows or sets the transmission mode of the DVB-T channel to which the frontend is tuned. It doesn't apply to other system deliveri… |
| 1.3.6.1.4.1.35902.1.4.3.1.8 | ColumnnodeDvbGuardInterval | read-write | current | Guard Interval This field shows or sets the guard interval of the DVB-T channel to which the frontend is tuned. It doesn't apply to other system deliveries. |
| 1.3.6.1.4.1.35902.1.4.3.1.9 | ColumnnodeDvbHierarchy | read-write | current | Hierarchy This field shows or sets the hierarchy setting of the DVB-T channel to which the frontend is tuned. It doesn't apply to other system deliveries. |
| 1.3.6.1.4.1.35902.1.4.3.1.10 | ColumnnodeDvbFEC | read-write | current | FEC This field shows or sets the Forward Error Correction setting of the multiplex to which the frontend is tuned. It only applies to DVB-S, DVB-S2 and DVB-T (… |
| 1.3.6.1.4.1.35902.1.4.3.1.11 | ColumnnodeDvbFECLP | read-write | current | FEC LP This field shows or sets the low-priority FEC setting of the DVB-T channel to which the frontend is tuned. It doesn't apply to other system deliveries. |
| 1.3.6.1.4.1.35902.1.4.3.1.12 | ColumnnodeDvbInversion | read-write | current | Inversion This field shows or sets the inversion mode of the multiplex to which the frontend is tuned. |
| 1.3.6.1.4.1.35902.1.4.3.1.13 | ColumnnodeDvbRolloff | read-write | current | Roll-off This field shows or sets the roll-off factor of the DVB-S2 transponder to which the frontend is tuned. It doesn't apply to other system deliveries. DV… |
| 1.3.6.1.4.1.35902.1.4.3.1.14 | ColumnnodeDvbPilot | read-write | current | Pilot This field shows or sets the pilot setting of the DVB-S2 transponder to which the frontend is tuned. It doesn't apply to other system deliveries. |
| 1.3.6.1.4.1.35902.1.4.3.1.15 | ColumnnodeDvbVoltage | read-write | current | Voltage This field shows or sets the line voltage applied by the frontend to a satellite LNB. It is typically 13 V for vertical transponders, 18 V for horizont… |
| 1.3.6.1.4.1.35902.1.4.3.1.16 | ColumnnodeDvbPulse | read-write | current | Hi-band This menu enables or disabled the output of a 22kHz pulse from the frontend to a satellite LNB. The pulse is typically used to switch from low-band (fr… |
| 1.3.6.1.4.1.35902.1.4.3.1.17 | ColumnnodeDvbDiseqc | read-write | current | Diseqc This field shows or sets the Diseqc setting of the satellite frontend. Eutelsat Diseqc mode is used to select between several satellites on the same coa… |
| 1.3.6.1.4.1.35902.1.4.3.1.18 | ColumnnodeDvbBER | read-only | current | Bit Error Rate This field shows the current Bit Error Rate while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.19 | ColumnnodeDvbStrength | read-only | current | Signal strength This field shows the current signal strength (in millidecibels-milliwatts) while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.20 | ColumnnodeDvbSNR | read-only | current | Signal-to-Noise ratio This field shows the current signal-to-noise ratio (in millidecibels) while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.21 | ColumnnodeDvbUncorrected | read-only | current | Uncorrected blocks This field shows the number of uncorrected blocks since the adapter is in operation. |
| 1.3.6.1.4.1.35902.1.4.3.1.22 | ColumnnodeDvbCAMName | read-only | current | CAM name This field shows the name of the CAM module inserted into the DVB adapter. |
| 1.3.6.1.4.1.35902.1.4.3.1.23 | ColumnnodeDvbBitrate | read-only | current | Current bitrate This field shows the current bitrate of the node (0 if not available). |
| 1.3.6.1.4.1.35902.1.4.3.1.24 | ColumnnodeDvbFilterPID | read-write | current | PID filtering This menu enables or disables the hardware PID filter. Please note that if it is enabled, less CPU will be used, but the whole TS stream won't be… |
| 1.3.6.1.4.1.35902.1.4.3.1.25 | ColumnnodeDvbErrorsInvalid | read-only | current | Invalid packets rate This field shows the current rate of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.26 | ColumnnodeDvbErrorsDisc | read-only | current | Discontinuities rate This field shows the current rate of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.27 | ColumnnodeDvbErrorsTransport | read-only | current | Transport errors rate This field shows the current rate of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.28 | ColumnnodeDvbPlsMode | read-write | current | PLS mode This field shows or sets the mode to use for multistream operation (default: none). |
| 1.3.6.1.4.1.35902.1.4.3.1.29 | ColumnnodeDvbPlsCode | read-write | current | PLS code This field shows or sets the code to use for multistream operation (default: 0). |
| 1.3.6.1.4.1.35902.1.4.3.1.30 | ColumnnodeDvbPlsStreamId | read-write | current | PLS stream ID This field shows or sets the stream ID to use for multistream operation (default: 0). |
| 1.3.6.1.4.1.35902.1.4.3.1.31 | ColumnnodeDvbErrorsInvalidCount | read-only | current | Invalid packets This field shows the current count of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.32 | ColumnnodeDvbErrorsDiscCount | read-only | current | Discontinuities This field shows the current count of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.33 | ColumnnodeDvbErrorsTransportCount | read-only | current | Transport errors This field shows the current count of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.3.1.34 | ColumnnodeDvbMisDemux | read-write | current | MIS demux support This menu enables or disables the BBFrame mode, which allows to access Multiple Input Stream information. Please note that if it is enabled, … |
| 1.3.6.1.4.1.35902.1.4.4 | TablenodeFileTable | not-accessible | current | List of configured file nodes |
| 1.3.6.1.4.1.35902.1.4.4.1 | RownodeFileEntry | not-accessible | current | Properties for a single configured file node |
| 1.3.6.1.4.1.35902.1.4.4.1.1 | ColumnnodeFileLink | read-write | current | Storage link This field references an entry in the storage link table, on which this node is written to or read from. A file node cannot be operational unless … |
| 1.3.6.1.4.1.35902.1.4.4.1.2 | ColumnnodeFileSize | read-only | current | File size This field shows the current size of the node. |
| 1.3.6.1.4.1.35902.1.4.4.1.3 | ColumnnodeFileLastChange | read-only | current | Last modified This field shows the date of the last modification to the file. |
| 1.3.6.1.4.1.35902.1.4.4.1.4 | ColumnnodeFileDuration | read-only | current | File duration This field shows the current duration of the file (in units of a 27 MHz clock), when available. |
| 1.3.6.1.4.1.35902.1.4.4.1.5 | ColumnnodeFilePath | read-write | current | Optional path This field shows or sets the access path for the file on the storage link. If left empty, the file will be hidden and only usable by the system. |
| 1.3.6.1.4.1.35902.1.4.4.1.6 | ColumnnodeFilePacketSize | read-write | current | Packet size This field shows or sets the constant size (in octets) of the incoming packets. It must be a multiple of the size of a TS packet (188 octets). For … |
| 1.3.6.1.4.1.35902.1.4.4.1.7 | ColumnnodeFileHints | read-write | current | Hints support When this is enabled, fingerprints will be calculated whenever the file changes. Enable this option if you plan to use a hint function with the n… |
| 1.3.6.1.4.1.35902.1.4.5 | TablenodeFileCircularTable | not-accessible | current | List of configured circular file nodes |
| 1.3.6.1.4.1.35902.1.4.5.1 | RownodeFileCircularEntry | not-accessible | current | Properties for a single configured circular file node |
| 1.3.6.1.4.1.35902.1.4.5.1.1 | ColumnnodeFileCircularLink | read-write | current | Storage link This field references an entry in the storage link table, on which this node is written to or read from. A circular file node cannot be operationa… |
| 1.3.6.1.4.1.35902.1.4.5.1.2 | ColumnnodeFileCircularChunkDuration | read-write | current | Chunk duration This field shows or sets the duration of a stream chunk, in seconds (default: 3600). Chunks can only be removed or added atomically, so the chun… |
| 1.3.6.1.4.1.35902.1.4.5.1.3 | ColumnnodeFileCircularChunks | read-write | current | Number of chunks This field shows or sets the number of chunks which are to be kept at all time. The minimum time retention of a stream is therefore chunks tim… |
| 1.3.6.1.4.1.35902.1.4.5.1.4 | ColumnnodeFileCircularPacketSize | read-write | current | Packet size This field shows or sets the constant size (in octets) of the incoming packets. It must be a multiple of the size of a TS packet (188 octets). For … |
| 1.3.6.1.4.1.35902.1.4.5.1.5 | ColumnnodeFileCircularOldestChunk | read-only | current | Oldest chunk This field shows or sets the creation date of the oldest available chunk. |
| 1.3.6.1.4.1.35902.1.4.5.1.6 | ColumnnodeFileCircularHints | read-write | current | Hints support When this is enabled, fingerprints will be calculated upon reception of the stream. Enable this option if you plan to use a hint function on the … |
| 1.3.6.1.4.1.35902.1.4.5.1.7 | ColumnnodeFileCircularThumbs | read-write | current | Thumbs support When this is enabled, thumbnails will be generated upon reception of the stream. |
| 1.3.6.1.4.1.35902.1.4.5.1.8 | ColumnnodeFileCircularPath | read-write | current | Optional path This field shows or sets the access path for the circular file on the storage link. If left empty, the file will be hidden and only usable by the… |
| 1.3.6.1.4.1.35902.1.4.5.1.9 | ColumnnodeFileCircularStructure | read-write | current | Structure support When this is enabled, the node structure (including EPG data) will be retrieved upon reception of the stream. |
| 1.3.6.1.4.1.35902.1.4.5.1.10 | ColumnnodeFileCircularChunkOffset | read-write | current | Chunk offset This field shows or sets the offset of a stream chunk, in percentage (default: random). On a single storage, chunks should all have different offs… |
| 1.3.6.1.4.1.35902.1.4.6 | TablenodeDirectoryTable | not-accessible | current | List of configured directory nodes |
| 1.3.6.1.4.1.35902.1.4.6.1 | RownodeDirectoryEntry | not-accessible | current | Properties for a single configured directory node |
| 1.3.6.1.4.1.35902.1.4.6.1.1 | ColumnnodeDirectoryLink | read-write | current | Storage link This field references an entry in the storage link table, on which this node is written to or read from. A directory node cannot be operational un… |
| 1.3.6.1.4.1.35902.1.4.6.1.2 | ColumnnodeDirectoryOrder | read-write | current | Processing order This field shows or sets the method to select the next input file to process. The list method requires to upload a .list file (see help for mo… |
| 1.3.6.1.4.1.35902.1.4.6.1.3 | ColumnnodeDirectoryDeleteOnUse | read-write | current | Delete on use When enabled, after a file in the directory has been used as an input to a function, it will be deleted. |
| 1.3.6.1.4.1.35902.1.4.6.1.4 | ColumnnodeDirectoryLockSuffix | read-write | current | Lock suffix This field shows or sets the suffix that will be appended to file names to create lock files. Lock files will be created as soon as the file is use… |
| 1.3.6.1.4.1.35902.1.4.6.1.5 | ColumnnodeDirectoryReadySuffix | read-write | current | Ready suffix This field shows or sets the suffix that will be appended to file names to create ready files. Ready files will be created, when used as an output… |
| 1.3.6.1.4.1.35902.1.4.6.1.6 | ColumnnodeDirectoryPacketSize | read-write | current | Packet size This field shows or sets the constant size (in octets) of the incoming packets. It must be a multiple of the size of a TS packet (188 octets). For … |
| 1.3.6.1.4.1.35902.1.4.6.1.7 | ColumnnodeDirectoryPath | read-write | current | Access path This field shows or sets the access path for the directory on the storage link. If left empty, the directory will be hidden and only usable by the … |
| 1.3.6.1.4.1.35902.1.4.6.1.8 | ColumnnodeDirectoryRestartOnListUpdate | read-write | current | Restart on list update When enabled, processing restarts from the beginning when the list file is modified. |
| 1.3.6.1.4.1.35902.1.4.7 | TablenodeAsiRxTable | not-accessible | current | List of configured DVB-ASI RX nodes |
| 1.3.6.1.4.1.35902.1.4.7.1 | RownodeAsiRxEntry | not-accessible | current | Properties for a single configured DVB-ASI RX node |
| 1.3.6.1.4.1.35902.1.4.7.1.1 | ColumnnodeAsiRxLink | read-write | current | DVB-ASI RX link This field references an entry in the DVB-ASI RX link table, to which this node is bound to. Only one DVB-ASI RX node may be bound to a specifi… |
| 1.3.6.1.4.1.35902.1.4.7.1.2 | ColumnnodeAsiRxBitrate | read-only | current | Current bitrate This field shows the current bitrate of the node (0 if not available). |
| 1.3.6.1.4.1.35902.1.4.7.1.3 | ColumnnodeAsiRxErrorsInvalid | read-only | current | Invalid packets rate This field shows the current rate of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.7.1.4 | ColumnnodeAsiRxErrorsDisc | read-only | current | Discontinuities rate This field shows the current rate of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.7.1.5 | ColumnnodeAsiRxErrorsTransport | read-only | current | Transport errors rate This field shows the current rate of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.7.1.6 | ColumnnodeAsiRxErrorsInvalidCount | read-only | current | Invalid packets This field shows the current count of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.7.1.7 | ColumnnodeAsiRxErrorsDiscCount | read-only | current | Discontinuities This field shows the current count of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.7.1.8 | ColumnnodeAsiRxErrorsTransportCount | read-only | current | Transport errors This field shows the current count of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.8 | TablenodeRtspTable | not-accessible | current | List of configured rtsp nodes |
| 1.3.6.1.4.1.35902.1.4.8.1 | RownodeRtspEntry | not-accessible | current | Properties for a single configured rtsp node |
| 1.3.6.1.4.1.35902.1.4.8.1.1 | ColumnnodeRtspLink | read-write | current | Network link This field references an entry in the network links table, to which this node is bound. |
| 1.3.6.1.4.1.35902.1.4.8.1.2 | ColumnnodeRtspURL | read-write | current | RTSP URL This field shows or sets the URL from which packets are received. |
| 1.3.6.1.4.1.35902.1.4.8.1.3 | ColumnnodeRtspAddress | read-write | current | Server address This field shows or sets the address of the RTSP server (if there is no DNS server). |
| 1.3.6.1.4.1.35902.1.4.9 | TablenodeJpegTable | not-accessible | current | List of configured jpeg nodes |
| 1.3.6.1.4.1.35902.1.4.9.1 | RownodeJpegEntry | not-accessible | current | Properties for a single configured jpeg node |
| 1.3.6.1.4.1.35902.1.4.9.1.1 | ColumnnodeJpegLink | read-write | current | Storage link This field references an entry in the storage link table, on which this node is written to or read from. A jpeg node cannot be operational unless … |
| 1.3.6.1.4.1.35902.1.4.9.1.2 | ColumnnodeJpegSize | read-only | current | Jpeg size This field shows the current size of the node. |
| 1.3.6.1.4.1.35902.1.4.9.1.3 | ColumnnodeJpegLastChange | read-only | current | Last modified This field shows the date of the last modification to the jpeg. |
| 1.3.6.1.4.1.35902.1.4.9.1.4 | ColumnnodeJpegPath | read-write | current | Optional path This field shows or sets the access path for the jpeg on the storage link. If left empty, the jpeg will be hidden and only usable by the system. |
| 1.3.6.1.4.1.35902.1.4.10 | TablenodeVideoRxTable | not-accessible | current | List of configured video RX nodes |
| 1.3.6.1.4.1.35902.1.4.10.1 | RownodeVideoRxEntry | not-accessible | current | Properties for a single configured video RX node |
| 1.3.6.1.4.1.35902.1.4.10.1.1 | ColumnnodeVideoRxLink | read-write | current | Video RX link This field references an entry in the video RX link table, to which this node is bound to. Only one video RX node may be bound to a specific vide… |
| 1.3.6.1.4.1.35902.1.4.10.1.2 | ColumnnodeVideoRxConnection | read-write | current | Connection This menu lists possible connections for a video RX link. Some connections may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.10.1.3 | ColumnnodeVideoRxMode | read-write | current | Mode This menu lists possible modes for a video RX link. Some modes may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.10.1.4 | ColumnnodeVideoRxConnectionAudio | read-write | current | Audio connection This menu lists possible audio connections for a video RX link. Some connections may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.10.1.5 | ColumnnodeVideoRxBitDepth | read-write | current | Bit depth This menu lists possible bit depths for a video RX link. Some bit depths may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.11 | TablenodeRtmpTable | not-accessible | current | List of configured rtmp nodes |
| 1.3.6.1.4.1.35902.1.4.11.1 | RownodeRtmpEntry | not-accessible | current | Properties for a single configured rtmp node |
| 1.3.6.1.4.1.35902.1.4.11.1.1 | ColumnnodeRtmpURL | read-write | current | Server URL This field shows or sets the URL (rtmp://[username:password@]server[:port][/app][/instance][/playpath]) to which packets are sent. |
| 1.3.6.1.4.1.35902.1.4.11.1.2 | ColumnnodeRtmpStream | read-write | current | Stream This field shows or sets the stream on which packets are sent. |
| 1.3.6.1.4.1.35902.1.4.11.1.3 | ColumnnodeRtmpUser | read-write | current | User This field shows or sets the user name to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.11.1.4 | ColumnnodeRtmpPassword | read-write | current | Password This field sets the password to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.11.1.5 | ColumnnodeRtmpMinDeviation | read-write | current | Min deviation This field shows or sets the minimum deviation for the input stream in ms. |
| 1.3.6.1.4.1.35902.1.4.11.1.6 | ColumnnodeRtmpLatency | read-write | current | Latency This field shows or sets the maximum latency for the input stream in ms. |
| 1.3.6.1.4.1.35902.1.4.11.1.7 | ColumnnodeRtmpTimeout | read-write | current | Timeout This field shows or sets the read/write maximum time in milliseconds to wait for packets after which the connection would be dropped, 0 means no timeou… |
| 1.3.6.1.4.1.35902.1.4.11.1.8 | ColumnnodeRtmpPlayAccessList | read-write | current | Play access list This field shows or sets a comma-separated list of IPv4 addresses or subnets allowed to pull from local RTMP streams. |
| 1.3.6.1.4.1.35902.1.4.11.1.9 | ColumnnodeRtmpPublishAccessList | read-write | current | Publish access list This field shows or sets a comma-separated list of IPv4 addresses or subnets allowed to push to local RTMP streams. |
| 1.3.6.1.4.1.35902.1.4.11.1.10 | ColumnnodeRtmpId3 | read-write | current | ID3 This field shows or sets whether the output should embedded the input ID3 metadata if present (only useful when using the rtmp node as an output). |
| 1.3.6.1.4.1.35902.1.4.12 | TablenodeVideoTable | not-accessible | current | List of configured video nodes |
| 1.3.6.1.4.1.35902.1.4.12.1 | RownodeVideoEntry | not-accessible | current | Properties for a single configured video node |
| 1.3.6.1.4.1.35902.1.4.12.1.1 | ColumnnodeVideoHints | read-write | current | Fingerprints support When this is enabled, fingerprints will be calculated upon decoding of the stream. Enable this option if you plan to use a grid hint or mo… |
| 1.3.6.1.4.1.35902.1.4.12.1.2 | ColumnnodeVideoWidth | read-write | current | Width This field shows or sets the width of the video frames. |
| 1.3.6.1.4.1.35902.1.4.12.1.3 | ColumnnodeVideoHeight | read-write | current | Height This field shows or sets the height of the video frames. |
| 1.3.6.1.4.1.35902.1.4.13 | TablenodeIcecastTable | not-accessible | current | List of configured icecast nodes |
| 1.3.6.1.4.1.35902.1.4.13.1 | RownodeIcecastEntry | not-accessible | current | Properties for a single configured icecast node |
| 1.3.6.1.4.1.35902.1.4.13.1.1 | ColumnnodeIcecastURL | read-write | current | Server URL This field shows or sets the URL (protocol://[username:password@]server:port/mountpoint) to which or from which packets are sent/received. |
| 1.3.6.1.4.1.35902.1.4.13.1.2 | ColumnnodeIcecastUser | read-write | current | User This field shows or sets the user name to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.13.1.3 | ColumnnodeIcecastPassword | read-write | current | Password This field sets the password to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.13.1.4 | ColumnnodeIcecastGenre | read-write | current | Genre This field shows or sets the stream genre. |
| 1.3.6.1.4.1.35902.1.4.13.1.5 | ColumnnodeIcecastName | read-write | current | Name This field shows or sets the stream name. |
| 1.3.6.1.4.1.35902.1.4.13.1.6 | ColumnnodeIcecastDescription | read-write | current | Description This field shows or sets the stream description. |
| 1.3.6.1.4.1.35902.1.4.13.1.7 | ColumnnodeIcecastPublic | read-write | current | Public This field shows or sets whether the stream should be public. |
| 1.3.6.1.4.1.35902.1.4.13.1.8 | ColumnnodeIcecastLegacy | read-write | current | Legacy This field shows or sets whether to enable support for Icecast versions < 2.4.0. |
| 1.3.6.1.4.1.35902.1.4.13.1.9 | ColumnnodeIcecastMinDeviation | read-write | current | Min deviation This field shows or sets the minimum deviation for the input stream in ms. |
| 1.3.6.1.4.1.35902.1.4.13.1.10 | ColumnnodeIcecastLatency | read-write | current | Latency This field shows or sets the maximum latency for the input stream in ms. |
| 1.3.6.1.4.1.35902.1.4.13.1.11 | ColumnnodeIcecastContentType | read-write | current | Content type This field shows or sets the content type for the output stream. Use auto to select aac for URLs ending with .aac, mp2 for URLs ending with .mp2 a… |
| 1.3.6.1.4.1.35902.1.4.13.1.12 | ColumnnodeIcecastId3 | read-write | current | ID3 This field shows or sets whether the output should embedded the input ID3 metadata if present (only useful when using the icecast node as an output). |
| 1.3.6.1.4.1.35902.1.4.14 | TablenodeMpegAudioTable | not-accessible | current | List of configured mpeg audio nodes |
| 1.3.6.1.4.1.35902.1.4.14.1 | RownodeMpegAudioEntry | not-accessible | current | Properties for a single configured mpeg audio node |
| 1.3.6.1.4.1.35902.1.4.14.1.1 | ColumnnodeMpegAudioLink | read-write | current | Network link This field references an entry in the network links table, to which this node is bound. |
| 1.3.6.1.4.1.35902.1.4.14.1.2 | ColumnnodeMpegAudioAddress | read-write | current | Address This field shows or sets the address from which packets are received. It is typically a multicast address (224.0.0.0 - 239.255.255.255). |
| 1.3.6.1.4.1.35902.1.4.14.1.3 | ColumnnodeMpegAudioPort | read-write | current | Port This field shows or sets the port from which packets are received. Typical values for this field are 1234, 300x, but it can be chosen freely in the range … |
| 1.3.6.1.4.1.35902.1.4.14.1.4 | ColumnnodeMpegAudioRTP | read-write | current | RTP This menu specifies whether an RTP header is present in every packet of the stream. It may have to be disabled for compatibility with older devices. |
| 1.3.6.1.4.1.35902.1.4.14.1.5 | ColumnnodeMpegAudioMTU | read-write | current | MTU This field shows or sets the maximum size of packets from this node. It should no be greater than the MTU of the network link. |
| 1.3.6.1.4.1.35902.1.4.14.1.6 | ColumnnodeMpegAudioSrcAddr | read-write | current | Source address This field shows or sets the address from which packets appear to be sent. An IGMPv3 request will be generated with this address as the sender (… |
| 1.3.6.1.4.1.35902.1.4.14.1.7 | ColumnnodeMpegAudioSrcPort | read-write | current | Source Port This field shows or sets the port from which packets appear to be sent, for output nodes. For input nodes in IGMPv3 mode, this allows to bind to th… |
| 1.3.6.1.4.1.35902.1.4.14.1.8 | ColumnnodeMpegAudioTTL | read-write | current | TTL When the node is used as an output node, and the address is in the multicast range, this field shows/sets the TTL (time to live) of outgoing packets. The T… |
| 1.3.6.1.4.1.35902.1.4.14.1.9 | ColumnnodeMpegAudioTOS | read-write | current | TOS When the node is used as an output node, this fields specifies the TOS (type of service) field of the IP header of outgoing packets. TOS fields are typical… |
| 1.3.6.1.4.1.35902.1.4.15 | TablenodePngTable | not-accessible | current | List of configured png nodes |
| 1.3.6.1.4.1.35902.1.4.15.1 | RownodePngEntry | not-accessible | current | Properties for a single configured png node |
| 1.3.6.1.4.1.35902.1.4.15.1.1 | ColumnnodePngLink | read-write | current | Storage link This field references an entry in the storage link table, on which this node is written to or read from. A png node cannot be operational unless i… |
| 1.3.6.1.4.1.35902.1.4.15.1.2 | ColumnnodePngSize | read-only | current | Png size This field shows the current size of the node. |
| 1.3.6.1.4.1.35902.1.4.15.1.3 | ColumnnodePngLastChange | read-only | current | Last modified This field shows the date of the last modification to the png. |
| 1.3.6.1.4.1.35902.1.4.15.1.4 | ColumnnodePngPath | read-write | current | Optional path This field shows or sets the access path for the png on the storage link. If left empty, the png will be hidden and only usable by the system. |
| 1.3.6.1.4.1.35902.1.4.16 | TablenodeAudioTable | not-accessible | current | List of configured audio nodes |
| 1.3.6.1.4.1.35902.1.4.16.1 | RownodeAudioEntry | not-accessible | current | Properties for a single configured audio node |
| 1.3.6.1.4.1.35902.1.4.16.1.1 | ColumnnodeAudioVolume | read-write | current | Volume support When this is enabled, audio volume will be calculated upon decoding of the stream. Enable this option if you plan to use a mosaic or overlay ope… |
| 1.3.6.1.4.1.35902.1.4.16.1.2 | ColumnnodeAudioR128 | read-write | current | EBU R128 support When this is enabled, EBU R128 loudness will be calculated upon decoding of the stream. Enable this option if you plan to use a monitor r128 f… |
| 1.3.6.1.4.1.35902.1.4.16.1.3 | ColumnnodeAudioR128Momentary | read-only | current | Momentary loudness This field shows the current momentary loudness of the audio node, in tenths of LUFS, when enabled. |
| 1.3.6.1.4.1.35902.1.4.16.1.4 | ColumnnodeAudioR128LRA | read-only | current | Loudness range This field shows the current loudness range of the audio node, in tenths of LUFS, when enabled. |
| 1.3.6.1.4.1.35902.1.4.16.1.5 | ColumnnodeAudioR128Global | read-only | current | Global loudness This field shows the current global loudness of the audio node, in tenths of LUFS, when enabled. |
| 1.3.6.1.4.1.35902.1.4.17 | TablenodeHlsRxTable | not-accessible | current | List of configured HLS Rx nodes |
| 1.3.6.1.4.1.35902.1.4.17.1 | RownodeHlsRxEntry | not-accessible | current | Properties for a single configured HLS Rx node |
| 1.3.6.1.4.1.35902.1.4.17.1.1 | ColumnnodeHlsRxURL | read-write | current | HLS URL This field shows or sets the URL from which packets are read. |
| 1.3.6.1.4.1.35902.1.4.17.1.2 | ColumnnodeHlsRxBandwidth | read-write | current | Bandwidth This field shows or sets the maximum bandwidth allocated to this node. This setting control which variant will be selected. |
| 1.3.6.1.4.1.35902.1.4.17.1.3 | ColumnnodeHlsRxBuffer | read-write | current | Buffer This field shows or sets the buffer size. For short playlists it can be interesting to lower this value. |
| 1.3.6.1.4.1.35902.1.4.17.1.4 | ColumnnodeHlsRxMaxDelay | read-write | current | Max delay This field shows or sets the maximum TS mux delay in milliseconds. Leave default value 0 to unset. |
| 1.3.6.1.4.1.35902.1.4.17.1.5 | ColumnnodeHlsRxFixStamps | read-write | current | Fix timestamps This field allows to fix the input timestamps. |
| 1.3.6.1.4.1.35902.1.4.18 | TablenodeSrtTable | not-accessible | current | List of configured SRT nodes |
| 1.3.6.1.4.1.35902.1.4.18.1 | RownodeSrtEntry | not-accessible | current | Properties for a single configured SRT node |
| 1.3.6.1.4.1.35902.1.4.18.1.1 | ColumnnodeSrtLink | read-write | current | Network link This field references an entry in the network links table, to which this node is bound. |
| 1.3.6.1.4.1.35902.1.4.18.1.2 | ColumnnodeSrtHost | read-write | current | Host This field shows or sets the host functions should connect to. This is used by functions in caller or rendezvous mode only. Host can be either a hostname … |
| 1.3.6.1.4.1.35902.1.4.18.1.3 | ColumnnodeSrtPort | read-write | current | Port This field shows or sets the port to which or from which packets are sent/received. |
| 1.3.6.1.4.1.35902.1.4.18.1.4 | ColumnnodeSrtTTL | read-write | current | TTL When the node is used as an output node, this field shows/sets the TTL (time to live) of outgoing packets. The TTL should be greater than or equal to the n… |
| 1.3.6.1.4.1.35902.1.4.18.1.5 | ColumnnodeSrtTOS | read-write | current | TOS When the node is used as an output node, this fields specifies the TOS (type of service) field of the IP header of outgoing packets. TOS fields are typical… |
| 1.3.6.1.4.1.35902.1.4.18.1.6 | ColumnnodeSrtRTP | read-write | current | RTP This menu specifies whether an RTP header is present in every packet of the stream. |
| 1.3.6.1.4.1.35902.1.4.18.1.7 | ColumnnodeSrtMSS | read-write | current | MSS This field shows or sets the Maximum Segment Size of packets from this node. It should not be greater than the MTU of the network link. |
| 1.3.6.1.4.1.35902.1.4.18.1.8 | ColumnnodeSrtSrcAddr | read-write | current | Source address This field shows or sets the address from which packets appear to be sent, for output nodes. By default (0.0.0.0), the local address of the inte… |
| 1.3.6.1.4.1.35902.1.4.18.1.9 | ColumnnodeSrtSrcPort | read-write | current | Source port This field shows or sets the port from which packets appear to be sent, for output nodes. |
| 1.3.6.1.4.1.35902.1.4.19 | TablenodePackageOriginTable | not-accessible | current | List of configured package origin nodes |
| 1.3.6.1.4.1.35902.1.4.19.1 | RownodePackageOriginEntry | not-accessible | current | Properties for a single configured package origin node |
| 1.3.6.1.4.1.35902.1.4.19.1.1 | ColumnnodePackageOriginPath | read-write | current | Origin path This field shows or sets the path at which the packages will be made available (/origin/<path>). |
| 1.3.6.1.4.1.35902.1.4.20 | TablenodeESTable | not-accessible | current | List of configured es nodes |
| 1.3.6.1.4.1.35902.1.4.20.1 | RownodeESEntry | not-accessible | current | Properties for a single configured es node |
| 1.3.6.1.4.1.35902.1.4.20.1.1 | ColumnnodeESType | read-write | current | Type Force type for ES node. |
| 1.3.6.1.4.1.35902.1.4.21 | TablenodeVideoTxTable | not-accessible | current | List of configured video TX nodes |
| 1.3.6.1.4.1.35902.1.4.21.1 | RownodeVideoTxEntry | not-accessible | current | Properties for a single configured video TX node |
| 1.3.6.1.4.1.35902.1.4.21.1.1 | ColumnnodeVideoTxLink | read-write | current | Video TX link This field references an entry in the video TX link table, to which this node is bound to. Only one video TX node may be bound to a specific vide… |
| 1.3.6.1.4.1.35902.1.4.21.1.2 | ColumnnodeVideoTxConnection | read-write | current | Connection This menu lists possible connections for a video TX link. Some connections may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.21.1.3 | ColumnnodeVideoTxMode | read-write | current | Mode This menu lists possible modes for a video TX link. Some modes may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.21.1.4 | ColumnnodeVideoTxConnectionAudio | read-write | current | Audio connection This menu lists possible audio connections for a video TX link. Some connections may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.21.1.5 | ColumnnodeVideoTxBitDepth | read-write | current | Bit depth This menu lists possible bit depths for a video TX link. Some bit depths may not be available on your hardware. |
| 1.3.6.1.4.1.35902.1.4.22 | TablenodeAmazonS3Table | not-accessible | current | List of configured amazon s3 nodes |
| 1.3.6.1.4.1.35902.1.4.22.1 | RownodeAmazonS3Entry | not-accessible | current | Properties for a single configured amazon s3 node |
| 1.3.6.1.4.1.35902.1.4.22.1.1 | ColumnnodeAmazonS3Bucket | read-write | current | Bucket name This field shows or sets the Amazon S3 bucket in which the files will be made available. |
| 1.3.6.1.4.1.35902.1.4.22.1.2 | ColumnnodeAmazonS3AccessKeyId | read-write | current | Access key ID This field shows or sets the AWS access key used as part of the credentials to authenticate the node requests. |
| 1.3.6.1.4.1.35902.1.4.22.1.3 | ColumnnodeAmazonS3SecretAccessKey | read-write | current | Secret access key This field shows or sets the AWS secret key used as part of the credentials to authenticate the node requests. |
| 1.3.6.1.4.1.35902.1.4.22.1.4 | ColumnnodeAmazonS3Region | read-write | current | Region code This field shows or sets the AWS region where the bucket resides. |
| 1.3.6.1.4.1.35902.1.4.22.1.5 | ColumnnodeAmazonS3Path | read-write | current | Path This field shows or sets the Amazon S3 folder in which the files will be made available. |
| 1.3.6.1.4.1.35902.1.4.22.1.6 | ColumnnodeAmazonS3EndpointURL | read-write | current | Endpoint URL This field shows or sets the Amazon S3 endpoint URL which should override the default AWS server URL. This can be used to connect to S3-compatible… |
| 1.3.6.1.4.1.35902.1.4.22.1.7 | ColumnnodeAmazonS3CannedACL | read-write | current | Canned ACL This field shows or sets the predefined set of grantees and permissions applied to each file uploaded to the bucket. Leave empty to use the default … |
| 1.3.6.1.4.1.35902.1.4.22.1.8 | ColumnnodeAmazonS3HttpHeaders | read-write | current | HTTP headers This field shows or sets the additional HTTP headers included in all requests to the S3-compatible service. Headers are preceded by a filename pat… |
| 1.3.6.1.4.1.35902.1.4.23 | TablenodeHttpTable | not-accessible | current | List of configured http nodes |
| 1.3.6.1.4.1.35902.1.4.23.1 | RownodeHttpEntry | not-accessible | current | Properties for a single configured http node |
| 1.3.6.1.4.1.35902.1.4.23.1.1 | ColumnnodeHttpURL | read-write | current | Server URL This field shows or sets the HTTP or HTTPS server URL. |
| 1.3.6.1.4.1.35902.1.4.23.1.2 | ColumnnodeHttpHeaders | read-write | current | Custom HTTP headers This field shows or sets the additional HTTP headers included in all requests to the HTTP server. Headers are preceded by a filename patter… |
| 1.3.6.1.4.1.35902.1.4.23.1.3 | ColumnnodeHttpUser | read-write | current | User This field shows or sets the user name to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.23.1.4 | ColumnnodeHttpPassword | read-write | current | Password This field sets the password to log into the remote server. |
| 1.3.6.1.4.1.35902.1.4.23.1.5 | ColumnnodeHttpAuthenticationMethod | read-write | current | Authentication method This field shows or sets the authentication method to be used with the remote server. Use any to probe for the most secure authentication… |
| 1.3.6.1.4.1.35902.1.4.24 | TablenodePcmTable | not-accessible | current | List of configured PCM nodes |
| 1.3.6.1.4.1.35902.1.4.24.1 | RownodePcmEntry | not-accessible | current | Properties for a single configured PCM node |
| 1.3.6.1.4.1.35902.1.4.24.1.1 | ColumnnodePcmLink | read-write | current | Network link This field references an entry in the network links table, to which this node is bound. |
| 1.3.6.1.4.1.35902.1.4.24.1.2 | ColumnnodePcmAddress | read-write | current | Address This field shows or sets the address from which packets are received. It is typically a multicast address (224.0.0.0 - 239.255.255.255). |
| 1.3.6.1.4.1.35902.1.4.24.1.3 | ColumnnodePcmPort | read-write | current | Port This field shows or sets the port from which packets are received. Typical values for this field are 1234, 300x, but it can be chosen freely in the range … |
| 1.3.6.1.4.1.35902.1.4.24.1.4 | ColumnnodePcmRTP | read-write | current | RTP This menu specifies whether an RTP header is present in every packet of the stream. It may have to be disabled for compatibility with older devices. |
| 1.3.6.1.4.1.35902.1.4.24.1.5 | ColumnnodePcmMTU | read-write | current | MTU This field shows or sets the maximum size of packets from this node. It should no be greater than the MTU of the network link. |
| 1.3.6.1.4.1.35902.1.4.24.1.6 | ColumnnodePcmSrcAddr | read-write | current | Source address This field shows or sets the address from which packets appear to be sent. An IGMPv3 request will be generated with this address as the sender (… |
| 1.3.6.1.4.1.35902.1.4.24.1.7 | ColumnnodePcmSrcPort | read-write | current | Source Port This field shows or sets the port from which packets appear to be sent, for output nodes. For input nodes in IGMPv3 mode, this allows to bind to th… |
| 1.3.6.1.4.1.35902.1.4.24.1.8 | ColumnnodePcmTTL | read-write | current | TTL When the node is used as an output node, and the address is in the multicast range, this field shows/sets the TTL (time to live) of outgoing packets. The T… |
| 1.3.6.1.4.1.35902.1.4.24.1.9 | ColumnnodePcmTOS | read-write | current | TOS When the node is used as an output node, this fields specifies the TOS (type of service) field of the IP header of outgoing packets. TOS fields are typical… |
| 1.3.6.1.4.1.35902.1.4.24.1.10 | ColumnnodePcmChannels | read-write | current | Channels This field shows or sets the number of audio channels. |
| 1.3.6.1.4.1.35902.1.4.24.1.11 | ColumnnodePcmSampleRate | read-write | current | Sample rate This field shows or sets the audio sample rate. |
| 1.3.6.1.4.1.35902.1.4.24.1.12 | ColumnnodePcmSampleSize | read-write | current | Sample size This field shows or sets the audio sample size in bits. |
| 1.3.6.1.4.1.35902.1.4.25 | TablenodePointerTable | not-accessible | current | List of configured pointer nodes |
| 1.3.6.1.4.1.35902.1.4.25.1 | RownodePointerEntry | not-accessible | current | Properties for a single configured pointer node |
| 1.3.6.1.4.1.35902.1.4.25.1.1 | ColumnnodePointerReferenceIndex | read-only | current | Reference This field shows the current node referenced by the pointer or zero. |
| 1.3.6.1.4.1.35902.1.4.26 | TablenodeLocalTable | not-accessible | current | List of configured local nodes |
| 1.3.6.1.4.1.35902.1.4.26.1 | RownodeLocalEntry | not-accessible | current | Properties for a single configured local node |
| 1.3.6.1.4.1.35902.1.4.26.1.1 | ColumnnodeLocalConformance | read-write | current | TS conformance This field shows or sets the TS conformance to which the stream complies. For output nodes, mandatory tables will be generated (unless no tables… |
| 1.3.6.1.4.1.35902.1.4.26.1.2 | ColumnnodeLocalProcess | read-write | current | Processing support When this is enabled, the local node will be analysed for MPEG tables, PIDs and bitrate. Enable this option if you plan to use it as the inp… |
| 1.3.6.1.4.1.35902.1.4.26.1.3 | ColumnnodeLocalTimeout | read-write | current | Timeout This field shows or sets the amount of time of silence, in milliseconds, after which the stream is considered down. |
| 1.3.6.1.4.1.35902.1.4.26.1.4 | ColumnnodeLocalCiDeviceIndex | read-write | current | CI device This field references an entry in the CI device table, which is used for descrambling input stream. The node must be used as an input of a demux func… |
| 1.3.6.1.4.1.35902.1.4.26.1.5 | ColumnnodeLocalBitrate | read-only | current | Current bitrate This field shows the current bitrate of the node (0 if not available). |
| 1.3.6.1.4.1.35902.1.4.26.1.6 | ColumnnodeLocalErrorsInvalid | read-only | current | Invalid packets rate This field shows the current rate of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.7 | ColumnnodeLocalErrorsDisc | read-only | current | Discontinuities rate This field shows the current rate of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.8 | ColumnnodeLocalErrorsTransport | read-only | current | Transport errors rate This field shows the current rate of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.9 | ColumnnodeLocalErrorsInvalidCount | read-only | current | Invalid packets This field shows the current count of invalid TS packets while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.10 | ColumnnodeLocalErrorsDiscCount | read-only | current | Discontinuities This field shows the current count of discontinuities while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.11 | ColumnnodeLocalErrorsTransportCount | read-only | current | Transport errors This field shows the current count of transport errors while receiving this multiplex. |
| 1.3.6.1.4.1.35902.1.4.26.1.12 | ColumnnodeLocalCAMName | read-only | current | CAM name This field shows the name of the CAM module inserted into the CI adapter used by the local node to descramble input. |
| 1.3.6.1.4.1.35902.1.5 | NodeserverFunction | |||
| 1.3.6.1.4.1.35902.1.5.1 | TablefunctionTable | not-accessible | current | List of configured functions |
| 1.3.6.1.4.1.35902.1.5.1.1 | RowfunctionEntry | not-accessible | current | Properties for a single configured function |
| 1.3.6.1.4.1.35902.1.5.1.1.1 | ColumnfunctionIndex | not-accessible | current | Function index |
| 1.3.6.1.4.1.35902.1.5.1.1.2 | ColumnfunctionStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.5.1.1.3 | ColumnfunctionType | read-create | current | Function type |
| 1.3.6.1.4.1.35902.1.5.1.1.4 | ColumnfunctionUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a function. |
| 1.3.6.1.4.1.35902.1.5.1.1.5 | ColumnfunctionDepStatus | read-only | current | True if the function has no dependency problem on a node |
| 1.3.6.1.4.1.35902.1.5.1.1.6 | ColumnfunctionLicenseStatus | read-only | current | True if there is a license which enables this function |
| 1.3.6.1.4.1.35902.1.5.1.1.7 | ColumnfunctionOpStatus | read-only | current | True if the function is operational |
| 1.3.6.1.4.1.35902.1.5.1.1.8 | ColumnfunctionLogs | read-only | current | Timestamp of the last change in the logs file. |
| 1.3.6.1.4.1.35902.1.5.1.1.9 | ColumnfunctionLastDown | read-only | current | Last down This field shows the last time the function went down. |
| 1.3.6.1.4.1.35902.1.5.1.1.10 | ColumnfunctionLastUp | read-only | current | Last up This field show the last time the function went up. |
| 1.3.6.1.4.1.35902.1.5.1.1.11 | ColumnfunctionDownScheduleIndex | read-create | current | Down schedule This field references an entry in the schedule table, which is triggered when the function goes down (if not null). |
| 1.3.6.1.4.1.35902.1.5.1.1.12 | ColumnfunctionUpScheduleIndex | read-create | current | Up schedule This field references an entry in the schedule table, which is triggered when the function goes up (if not null). |
| 1.3.6.1.4.1.35902.1.5.1.1.13 | ColumnfunctionDisabledAtStartup | read-create | current | Disabled at startup When enabled, the function is disabled when the server starts up. |
| 1.3.6.1.4.1.35902.1.5.1.1.14 | ColumnfunctionLastCleared | read-create | current | Last cleared This field shows the last time the counters were cleared. |
| 1.3.6.1.4.1.35902.1.5.1.1.15 | ColumnfunctionScheduleContext | read-create | current | Schedule context This field shows or sets the schedule environment variables. They can be defined using a whitespace separated list of key=value items. |
| 1.3.6.1.4.1.35902.1.5.1.1.16 | ColumnfunctionName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.5.2 | TablefunctionDemuxTable | not-accessible | current | List of configured demux functions |
| 1.3.6.1.4.1.35902.1.5.2.1 | RowfunctionDemuxEntry | not-accessible | current | Properties for a single configured demux function |
| 1.3.6.1.4.1.35902.1.5.2.1.1 | ColumnfunctionDemuxInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the demux function. The input must be a net, dvb, asi rx, pointer or … |
| 1.3.6.1.4.1.35902.1.5.2.1.2 | ColumnfunctionDemuxOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used to output the entire multiplex read from the input node. The output must be a net o… |
| 1.3.6.1.4.1.35902.1.5.2.1.3 | ColumnfunctionDemuxNetworkID | read-write | current | Network ID This number shows or sets the network ID that is written in the NIT of all outgoing streams (if DVB conformance is enabled). Network IDs should be r… |
| 1.3.6.1.4.1.35902.1.5.2.1.4 | ColumnfunctionDemuxNetworkName | read-write | current | Network Name This string shows or sets the network name that is written in the NIT of all outgoing streams (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.3 | TablefunctionMonitorTable | not-accessible | current | List of configured monitor functions |
| 1.3.6.1.4.1.35902.1.5.3.1 | RowfunctionMonitorEntry | not-accessible | current | Properties for a single configured monitor function |
| 1.3.6.1.4.1.35902.1.5.3.1.1 | ColumnfunctionMonitorStatus | read-write | current | Current input This field shows or sets whether the input node is used or the fallback node. |
| 1.3.6.1.4.1.35902.1.5.3.1.2 | ColumnfunctionMonitorSwitchOffDelay | read-write | current | Switch off delay This field shows or sets the amount of time (in seconds) after which the function switches to the fallback node when the input goes down. |
| 1.3.6.1.4.1.35902.1.5.3.1.3 | ColumnfunctionMonitorSwitchBack | read-write | current | Switch back This field shows or sets whether the function automatically returns to the input node when it comes back. |
| 1.3.6.1.4.1.35902.1.5.3.1.4 | ColumnfunctionMonitorSwitchBackDelay | read-write | current | Switch back delay This field shows or sets the amount of time (in seconds) after which the function returns to the input node when it comes back. |
| 1.3.6.1.4.1.35902.1.5.3.1.5 | ColumnfunctionMonitorInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the monitor function. The input must be a net, dvb, asi rx, pointer o… |
| 1.3.6.1.4.1.35902.1.5.3.1.6 | ColumnfunctionMonitorOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used to output either the content of the input node, or the content of the fallback node… |
| 1.3.6.1.4.1.35902.1.5.3.1.7 | ColumnfunctionMonitorFallbackIndex | read-write | current | Fallback node This field references an entry in the node table, which is used as a secondary input if the input node fails. The fallback must be a net, pointer… |
| 1.3.6.1.4.1.35902.1.5.3.1.8 | ColumnfunctionMonitorBitrateMin | read-write | current | Min bitrate This field shows or sets the minimum bitrate (in bits/s) demanded on the input node, unless it fails. |
| 1.3.6.1.4.1.35902.1.5.3.1.9 | ColumnfunctionMonitorBitrateMax | read-write | current | Max bitrate This field shows or sets the maximum bitrate (in bits/s) allowed on the input node, unless it fails. |
| 1.3.6.1.4.1.35902.1.5.3.1.10 | ColumnfunctionMonitorFreezeDuration | read-write | current | Freeze duration This field shows or sets the duration in milliseconds above which a frozen picture and/or silence is considered an error. This feature requires… |
| 1.3.6.1.4.1.35902.1.5.3.1.11 | ColumnfunctionMonitorFreezeMode | read-write | current | Freeze mode This field shows or sets the the mode of detection of a freeze (frozen picture and/or silence). |
| 1.3.6.1.4.1.35902.1.5.3.1.12 | ColumnfunctionMonitorDvbBERMax | read-write | current | Max Bit Error Rate This field shows or sets the maximum Bit Error Rate allowed for the input DVB node. |
| 1.3.6.1.4.1.35902.1.5.3.1.13 | ColumnfunctionMonitorDvbStrengthMin | read-write | current | Min signal strength This field shows or sets the minimum signal strength (in millidecibels-milliwatts) expected for the input DVB node. |
| 1.3.6.1.4.1.35902.1.5.3.1.14 | ColumnfunctionMonitorDvbSNRMin | read-write | current | Min SNR This field shows or sets the minimum signal to noise ratio (in millidecibels) expected for the input DVB node. |
| 1.3.6.1.4.1.35902.1.5.3.1.15 | ColumnfunctionMonitorDvbCAM | read-write | current | CAM required If this field is set, the monitor function fails when there is no CAM in the input DVB node, or when it doesn't respond. |
| 1.3.6.1.4.1.35902.1.5.3.1.16 | ColumnfunctionMonitorErrorsInvalidMax | read-write | current | Max invalid packets rate This field shows or sets the maximum rate of invalid packets allowed for the input node. |
| 1.3.6.1.4.1.35902.1.5.3.1.17 | ColumnfunctionMonitorErrorsDiscMax | read-write | current | Max discontinuities rate This field shows or sets the maximum rate of discontinuities allowed for the input node. |
| 1.3.6.1.4.1.35902.1.5.3.1.18 | ColumnfunctionMonitorErrorsTransportMax | read-write | current | Max transport errors rate This field shows or sets the maximum rate of transport errors allowed for the input node. |
| 1.3.6.1.4.1.35902.1.5.3.1.19 | ColumnfunctionMonitorAlgoStill | read-write | current | Algorithm This field shows or sets the still detection algorithm. |
| 1.3.6.1.4.1.35902.1.5.3.1.20 | ColumnfunctionMonitorNoiseStill | read-write | current | Noise level This field shows or sets the still noise level. |
| 1.3.6.1.4.1.35902.1.5.3.1.21 | ColumnfunctionMonitorWidthStill | read-write | current | Width This field shows or sets the still frame width. |
| 1.3.6.1.4.1.35902.1.5.3.1.22 | ColumnfunctionMonitorHeightStill | read-write | current | Height This field shows or sets the still frame height. |
| 1.3.6.1.4.1.35902.1.5.3.1.23 | ColumnfunctionMonitorMomentaryMin | read-write | current | Minimum momentary This field shows or sets the minimum momentary loudness for sound detection, in LUFS. |
| 1.3.6.1.4.1.35902.1.5.3.1.24 | ColumnfunctionMonitorUpdateScheduleIndex | read-write | current | Update schedule This field references an entry in the schedule table, which is triggered for update (if not null). |
| 1.3.6.1.4.1.35902.1.5.4 | TablefunctionPlayoutTable | not-accessible | current | List of configured playout functions |
| 1.3.6.1.4.1.35902.1.5.4.1 | RowfunctionPlayoutEntry | not-accessible | current | Properties for a single configured playout function |
| 1.3.6.1.4.1.35902.1.5.4.1.1 | ColumnfunctionPlayoutOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the playout function. The output must be a net or local node. The f… |
| 1.3.6.1.4.1.35902.1.5.4.1.2 | ColumnfunctionPlayoutFixCC | read-write | current | Fix continuity counters This field allows to fix the continuity counters of every PID, so that they appear continuous. It is particularly useful when playing a… |
| 1.3.6.1.4.1.35902.1.5.4.1.3 | ColumnfunctionPlayoutFixStamps | read-write | current | Fix timestamps This field allows to fix the PCRs and the timestamps of every elementary stream, so that they appear continuous. It is particularly useful when … |
| 1.3.6.1.4.1.35902.1.5.4.1.4 | ColumnfunctionPlayoutLastChange | read-only | current | Last input change This field shows the time at which the current input was selected. |
| 1.3.6.1.4.1.35902.1.5.4.1.5 | ColumnfunctionPlayoutFilename | read-only | current | Current file This field shows the name of the file being played out, if the input is a directory node. |
| 1.3.6.1.4.1.35902.1.5.5 | TablefunctionRecordTable | not-accessible | current | List of configured record functions |
| 1.3.6.1.4.1.35902.1.5.5.1 | RowfunctionRecordEntry | not-accessible | current | Properties for a single configured record function |
| 1.3.6.1.4.1.35902.1.5.5.1.1 | ColumnfunctionRecordInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the record function. The input must be a net, pointer or local node. … |
| 1.3.6.1.4.1.35902.1.5.5.1.2 | ColumnfunctionRecordOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the record function. The output must be a circular file node. The f… |
| 1.3.6.1.4.1.35902.1.5.5.1.3 | ColumnfunctionRecordSID | read-write | current | Decoded SID This field references an entry in the node table, which, in the case of an MPTS, specifies which service is used by the record function for hint an… |
| 1.3.6.1.4.1.35902.1.5.6 | TablefunctionExtractTable | not-accessible | current | List of configured extract functions |
| 1.3.6.1.4.1.35902.1.5.6.1 | RowfunctionExtractEntry | not-accessible | current | Properties for a single configured extract function |
| 1.3.6.1.4.1.35902.1.5.6.1.1 | ColumnfunctionExtractInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the extract function. The input must be a directory node. The functio… |
| 1.3.6.1.4.1.35902.1.5.7 | TablefunctionHintTable | not-accessible | current | List of configured hint functions |
| 1.3.6.1.4.1.35902.1.5.7.1 | RowfunctionHintEntry | not-accessible | current | Properties for a single configured hint function |
| 1.3.6.1.4.1.35902.1.5.7.1.1 | ColumnfunctionHintInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the hint function. The input must be a circular file node. The functi… |
| 1.3.6.1.4.1.35902.1.5.8 | TablefunctionRemuxTable | not-accessible | current | List of configured remux functions |
| 1.3.6.1.4.1.35902.1.5.8.1 | RowfunctionRemuxEntry | not-accessible | current | Properties for a single configured remux function |
| 1.3.6.1.4.1.35902.1.5.8.1.1 | ColumnfunctionRemuxInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the remux function. The input must be a net, extract, rtmp, icecast, … |
| 1.3.6.1.4.1.35902.1.5.8.1.2 | ColumnfunctionRemuxOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the remux function. The output must be a net, directory or local no… |
| 1.3.6.1.4.1.35902.1.5.8.1.3 | ColumnfunctionRemuxMode | read-write | current | Mux mode This field shows or sets the current TS mux mode. |
| 1.3.6.1.4.1.35902.1.5.8.1.4 | ColumnfunctionRemuxBitrate | read-write | current | Mux bitrate This field shows or sets the total (TS) bitrate of the output. If set to 0, bitrate will be automatically calculated. |
| 1.3.6.1.4.1.35902.1.5.8.1.5 | ColumnfunctionRemuxBitratePadding | read-write | current | Padding bitrate This field shows or sets the bitrate added to the output as padding. |
| 1.3.6.1.4.1.35902.1.5.8.1.6 | ColumnfunctionRemuxPATInterval | read-write | current | PAT interval This field shows or sets the interval between repetitions of the PAT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.8.1.7 | ColumnfunctionRemuxPMTInterval | read-write | current | PMT interval This field shows or sets the interval between repetitions of the PMT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.8.1.8 | ColumnfunctionRemuxPCRInterval | read-write | current | PCR interval This field shows or sets the interval between PCRs, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.8.1.9 | ColumnfunctionRemuxNITInterval | read-write | current | NIT interval This field shows or sets the interval between repetitions of the NIT, in units of a 27 MHz clock. To disable sending the NIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.8.1.10 | ColumnfunctionRemuxSDTInterval | read-write | current | SDT interval This field shows or sets the interval between repetitions of the SDT, in units of a 27 MHz clock. To disable sending the SDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.8.1.11 | ColumnfunctionRemuxEITInterval | read-write | current | EIT interval This field shows or sets the interval between repetitions of the EIT, in units of a 27 MHz clock. To disable sending the EIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.8.1.12 | ColumnfunctionRemuxTDTInterval | read-write | current | TDT interval This field shows or sets the interval between repetitions of the TDT, in units of a 27 MHz clock. To disable sending the TDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.8.1.13 | ColumnfunctionRemuxLowLatency | read-write | current | Low latency This field allows to configure the mux for lower latency. Remember to set the VBV or CPB buffer to the equivalent of one frame. |
| 1.3.6.1.4.1.35902.1.5.8.1.14 | ColumnfunctionRemuxPassthrough | read-write | current | ES passthrough This field shows or sets whether the remux passes through the elementary stream which have no transcode operations. |
| 1.3.6.1.4.1.35902.1.5.8.1.15 | ColumnfunctionRemuxAACEncapsulation | read-write | current | AAC encapsulation This field shows or sets the encapsulation to use for AAC streams. |
| 1.3.6.1.4.1.35902.1.5.8.1.16 | ColumnfunctionRemuxDVBEncoding | read-write | current | DVB encoding This string shows or sets the encoding used to encode DVB strings. |
| 1.3.6.1.4.1.35902.1.5.8.1.17 | ColumnfunctionRemuxBitrateEITs | read-write | current | EITs bitrate This field shows or sets the bitrate reserved for EIT schedules. |
| 1.3.6.1.4.1.35902.1.5.8.1.18 | ColumnfunctionRemuxScteKeyframe | read-write | current | SCTE keyframe This field shows or sets if a keyframe must be generated on SCTE-35 messages. |
| 1.3.6.1.4.1.35902.1.5.8.1.19 | ColumnfunctionRemuxPESMinDuration | read-write | current | PES minimum duration This field shows or sets the PES minimum duration (in units of a 27MHz clock) for audio streams. Use 0 for default. |
| 1.3.6.1.4.1.35902.1.5.8.1.20 | ColumnfunctionRemuxScte35Interval | read-write | current | SCTE-35 interval This field shows or sets the interval between repetitions of the SCTE-35 messages, in units of a 27MHz clock. To disable sending SCTE-35 messa… |
| 1.3.6.1.4.1.35902.1.5.8.1.21 | ColumnfunctionRemuxForcePESAlignment | read-write | current | Force PES alignment This field shows or sets if the PES alignment is forced for all outputs. |
| 1.3.6.1.4.1.35902.1.5.8.1.22 | ColumnfunctionRemuxKeyframeInterval | read-write | current | Keyframe interval This field shows or sets the interval (in units of a 27Mhz clock) between inserted keyframes in video transcode operations. Use 0 to disable … |
| 1.3.6.1.4.1.35902.1.5.9 | TablefunctionForwardTable | not-accessible | current | List of configured forward functions |
| 1.3.6.1.4.1.35902.1.5.9.1 | RowfunctionForwardEntry | not-accessible | current | Properties for a single configured forward function |
| 1.3.6.1.4.1.35902.1.5.9.1.1 | ColumnfunctionForwardInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the forward function. The input must be a net, dvb, asi rx, rtsp, rtm… |
| 1.3.6.1.4.1.35902.1.5.9.1.2 | ColumnfunctionForwardOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the forward function. The output must be a net, rtmp, icecast, mpeg… |
| 1.3.6.1.4.1.35902.1.5.10 | TablefunctionTransmitInputTable | not-accessible | deprecated | List of configured transmit input functions |
| 1.3.6.1.4.1.35902.1.5.10.1 | RowfunctionTransmitInputEntry | not-accessible | deprecated | Properties for a single configured transmit input function |
| 1.3.6.1.4.1.35902.1.5.10.1.1 | ColumnfunctionTransmitInputOutputIndex | read-write | deprecated | Output node This field references an entry in the node table, which is used as an output to the transmit input function. The output must be a net node. The fun… |
| 1.3.6.1.4.1.35902.1.5.10.1.2 | ColumnfunctionTransmitInputBuffer | read-write | deprecated | Buffering The field shows or sets the amount of time (in milliseconds) to wait for incoming packets to arrive, before reordering and outputting them. |
| 1.3.6.1.4.1.35902.1.5.10.1.3 | ColumnfunctionTransmitInputRetransmitIndex | read-write | deprecated | Retransmission node This field references an entry in the node table, to which retransmission requests will be sent. Retransmission is optional so this field c… |
| 1.3.6.1.4.1.35902.1.5.10.1.4 | ColumnfunctionTransmitInputRetransmitTimeout | read-write | deprecated | Retransmission timeout The field shows or sets the amount of time (in milliseconds) after which retransmission requests for lost packets are sent. It must nece… |
| 1.3.6.1.4.1.35902.1.5.10.1.5 | ColumnfunctionTransmitInputRetransmitMax | read-write | deprecated | Max retransmission requests The field shows or sets the maximum number of concurrent retransmission requests. You should adjust the field based on your spare b… |
| 1.3.6.1.4.1.35902.1.5.11 | TablefunctionTransmitOutputTable | not-accessible | deprecated | List of configured transmit output functions |
| 1.3.6.1.4.1.35902.1.5.11.1 | RowfunctionTransmitOutputEntry | not-accessible | deprecated | Properties for a single configured transmit output function |
| 1.3.6.1.4.1.35902.1.5.11.1.1 | ColumnfunctionTransmitOutputInputIndex | read-write | deprecated | Input node This field references an entry in the node table, which is used as an input to the transmit output function. The input must be a net node. The funct… |
| 1.3.6.1.4.1.35902.1.5.11.1.2 | ColumnfunctionTransmitOutputRetransmitIndex | read-write | deprecated | Retransmission node This field references an entry in the node table, from which retransmission requests will be sent. Retransmission is optional so this field… |
| 1.3.6.1.4.1.35902.1.5.11.1.3 | ColumnfunctionTransmitOutputRetransmitBuffer | read-write | deprecated | Retransmission buffering The field shows or sets the amount of time (in milliseconds) to buffer, for retransmission purposes. It should be equal to the bufferi… |
| 1.3.6.1.4.1.35902.1.5.12 | TablefunctionGridInputTable | not-accessible | current | List of configured grid input functions |
| 1.3.6.1.4.1.35902.1.5.12.1 | RowfunctionGridInputEntry | not-accessible | current | Properties for a single configured grid input function |
| 1.3.6.1.4.1.35902.1.5.12.1.1 | ColumnfunctionGridInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the grid function. The input must be a net, pointer or local node. Th… |
| 1.3.6.1.4.1.35902.1.5.13 | TablefunctionGridOutputTable | not-accessible | current | List of configured grid output functions |
| 1.3.6.1.4.1.35902.1.5.13.1 | RowfunctionGridOutputEntry | not-accessible | current | Properties for a single configured grid output function |
| 1.3.6.1.4.1.35902.1.5.13.1.1 | ColumnfunctionGridOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the grid function. The output must be a net or local node. The func… |
| 1.3.6.1.4.1.35902.1.5.13.1.2 | ColumnfunctionGridOutputMode | read-write | current | Mux mode This field shows or sets the current TS mux mode. |
| 1.3.6.1.4.1.35902.1.5.13.1.3 | ColumnfunctionGridOutputBitrate | read-write | current | Mux bitrate This field shows or sets the total (TS) bitrate of the output. If set to 0, bitrate will be automatically calculated. |
| 1.3.6.1.4.1.35902.1.5.13.1.4 | ColumnfunctionGridOutputBitratePadding | read-write | current | Padding bitrate This field shows or sets the bitrate added to the output as padding. |
| 1.3.6.1.4.1.35902.1.5.13.1.5 | ColumnfunctionGridOutputPATInterval | read-write | current | PAT interval This field shows or sets the interval between repetitions of the PAT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.13.1.6 | ColumnfunctionGridOutputPMTInterval | read-write | current | PMT interval This field shows or sets the interval between repetitions of the PMT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.13.1.7 | ColumnfunctionGridOutputPCRInterval | read-write | current | PCR interval This field shows or sets the interval between PCRs, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.13.1.8 | ColumnfunctionGridOutputLowLatency | read-write | current | Low latency This field allows to configure the mux for lower latency. Remember to set the VBV or CPB buffer to the equivalent of one frame. |
| 1.3.6.1.4.1.35902.1.5.13.1.9 | ColumnfunctionGridOutputTSID | read-write | current | TS ID This field shows or sets the transport stream ID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.13.1.10 | ColumnfunctionGridOutputSID | read-write | current | Service ID This field shows or sets the service ID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.13.1.11 | ColumnfunctionGridOutputPMTPID | read-write | current | PMT PID This field shows or sets the PMT PID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.13.1.12 | ColumnfunctionGridOutputNetworkID | read-write | current | Network ID This number shows or sets the network ID that is written in the NIT of an outgoing stream (if DVB conformance is enabled). Network IDs should be reg… |
| 1.3.6.1.4.1.35902.1.5.13.1.13 | ColumnfunctionGridOutputNetworkName | read-write | current | Network Name This string shows or sets the network name that is written in the NIT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.13.1.14 | ColumnfunctionGridOutputOriginalNetworkID | read-write | current | Original Network ID This number shows or sets the original network ID that is written in the SDT of an outgoing stream (if DVB conformance is enabled). Network… |
| 1.3.6.1.4.1.35902.1.5.13.1.15 | ColumnfunctionGridOutputServiceName | read-write | current | Service Name This string shows or sets the service name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.13.1.16 | ColumnfunctionGridOutputProviderName | read-write | current | Provider Name This string shows or sets the provider name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.13.1.17 | ColumnfunctionGridOutputNITInterval | read-write | current | NIT interval This field shows or sets the interval between repetitions of the NIT, in units of a 27 MHz clock. To disable sending the NIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.13.1.18 | ColumnfunctionGridOutputSDTInterval | read-write | current | SDT interval This field shows or sets the interval between repetitions of the SDT, in units of a 27 MHz clock. To disable sending the SDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.13.1.19 | ColumnfunctionGridOutputTDTInterval | read-write | current | TDT interval This field shows or sets the interval between repetitions of the TDT, in units of a 27 MHz clock. To disable sending the TDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.13.1.20 | ColumnfunctionGridOutputAACEncapsulation | read-write | current | AAC encapsulation This field shows or sets the encapsulation to use for AAC streams. |
| 1.3.6.1.4.1.35902.1.5.13.1.21 | ColumnfunctionGridOutputDVBEncoding | read-write | current | DVB encoding This string shows or sets the encoding used to encode DVB strings. |
| 1.3.6.1.4.1.35902.1.5.13.1.22 | ColumnfunctionGridOutputRealtimeClock | read-write | current | Realtime clock Use realtime clock instead of monotonic clock for output. |
| 1.3.6.1.4.1.35902.1.5.13.1.23 | ColumnfunctionGridOutputPESMinDuration | read-write | current | PES minimum duration This field shows or sets the PES minimum duration (in units of a 27MHz clock) for audio streams. Use 0 for default. |
| 1.3.6.1.4.1.35902.1.5.13.1.24 | ColumnfunctionGridOutputForcePESAlignment | read-write | current | Force PES alignment This field shows or sets if the PES alignment is forced for all outputs. |
| 1.3.6.1.4.1.35902.1.5.13.1.25 | ColumnfunctionGridOutputKeyframeInterval | read-write | current | Keyframe interval This field shows or sets the interval (in units of a 27Mhz clock) between inserted keyframes in video transcode operations. Use 0 to disable … |
| 1.3.6.1.4.1.35902.1.5.13.1.26 | ColumnfunctionGridOutputServiceType | read-write | current | Service type This field shows or sets the service type that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.14 | TablefunctionGridImageTable | not-accessible | current | List of configured grid image functions |
| 1.3.6.1.4.1.35902.1.5.14.1 | RowfunctionGridImageEntry | not-accessible | current | Properties for a single configured grid image function |
| 1.3.6.1.4.1.35902.1.5.14.1.1 | ColumnfunctionGridImageIndex | read-write | current | Image node This field references an entry in the node table, which is used as an input image to the grid function. The image must be a jpeg or png node. The fu… |
| 1.3.6.1.4.1.35902.1.5.14.1.2 | ColumnfunctionGridImageOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the grid image function. The output must be a video node. The funct… |
| 1.3.6.1.4.1.35902.1.5.15 | TablefunctionGridAcquireTable | not-accessible | current | List of configured grid acquire functions |
| 1.3.6.1.4.1.35902.1.5.15.1 | RowfunctionGridAcquireEntry | not-accessible | current | Properties for a single configured grid acquire function |
| 1.3.6.1.4.1.35902.1.5.15.1.1 | ColumnfunctionGridAcquireIndex | read-write | current | Acquire node This field references an entry in the node table, which is used as an input acquire to the grid function. The acquire must be a video rx node. The… |
| 1.3.6.1.4.1.35902.1.5.15.1.2 | ColumnfunctionGridAcquireVideoOutputIndex | read-write | current | Video node This field references an entry in the node table, which is used as a video output to the grid acquire function. The output must be a video node. The… |
| 1.3.6.1.4.1.35902.1.5.15.1.3 | ColumnfunctionGridAcquireVideoDelay | read-write | current | Video delay This field shows or sets the delay to apply to the video in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.16 | TablefunctionAcquireTable | not-accessible | current | List of configured acquire functions |
| 1.3.6.1.4.1.35902.1.5.16.1 | RowfunctionAcquireEntry | not-accessible | current | Properties for a single configured acquire function |
| 1.3.6.1.4.1.35902.1.5.16.1.1 | ColumnfunctionAcquireInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the acquire function. The input must be a video rx node. The function… |
| 1.3.6.1.4.1.35902.1.5.16.1.2 | ColumnfunctionAcquireOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the acquire function. The output must be a net or local node. The f… |
| 1.3.6.1.4.1.35902.1.5.16.1.3 | ColumnfunctionAcquireMode | read-write | current | Mux mode This field shows or sets the current TS mux mode. |
| 1.3.6.1.4.1.35902.1.5.16.1.4 | ColumnfunctionAcquireBitrate | read-write | current | Mux bitrate This field shows or sets the total (TS) bitrate of the output. If set to 0, bitrate will be automatically calculated. |
| 1.3.6.1.4.1.35902.1.5.16.1.5 | ColumnfunctionAcquireBitratePadding | read-write | current | Padding bitrate This field shows or sets the bitrate added to the output as padding. |
| 1.3.6.1.4.1.35902.1.5.16.1.6 | ColumnfunctionAcquirePATInterval | read-write | current | PAT interval This field shows or sets the interval between repetitions of the PAT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.16.1.7 | ColumnfunctionAcquirePMTInterval | read-write | current | PMT interval This field shows or sets the interval between repetitions of the PMT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.16.1.8 | ColumnfunctionAcquirePCRInterval | read-write | current | PCR interval This field shows or sets the interval between PCRs, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.16.1.9 | ColumnfunctionAcquireLowLatency | read-write | current | Low latency This field allows to configure the mux for lower latency. Remember to set the VBV or CPB buffer to the equivalent of one frame. |
| 1.3.6.1.4.1.35902.1.5.16.1.10 | ColumnfunctionAcquireTSID | read-write | current | TS ID This field shows or sets the transport stream ID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.16.1.11 | ColumnfunctionAcquireSID | read-write | current | Service ID This field shows or sets the service ID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.16.1.12 | ColumnfunctionAcquirePMTPID | read-write | current | PMT PID This field shows or sets the PMT PID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.16.1.13 | ColumnfunctionAcquireVideoPID | read-write | current | Video PID This field shows or sets the video PID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.16.1.14 | ColumnfunctionAcquireNetworkID | read-write | current | Network ID This number shows or sets the network ID that is written in the NIT of an outgoing stream (if DVB conformance is enabled). Network IDs should be reg… |
| 1.3.6.1.4.1.35902.1.5.16.1.15 | ColumnfunctionAcquireNetworkName | read-write | current | Network Name This string shows or sets the network name that is written in the NIT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.16.1.16 | ColumnfunctionAcquireOriginalNetworkID | read-write | current | Original Network ID This number shows or sets the original network ID that is written in the SDT of an outgoing stream (if DVB conformance is enabled). Network… |
| 1.3.6.1.4.1.35902.1.5.16.1.17 | ColumnfunctionAcquireServiceName | read-write | current | Service Name This string shows or sets the service name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.16.1.18 | ColumnfunctionAcquireProviderName | read-write | current | Provider Name This string shows or sets the provider name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.16.1.19 | ColumnfunctionAcquireNITInterval | read-write | current | NIT interval This field shows or sets the interval between repetitions of the NIT, in units of a 27 MHz clock. To disable sending the NIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.16.1.20 | ColumnfunctionAcquireSDTInterval | read-write | current | SDT interval This field shows or sets the interval between repetitions of the SDT, in units of a 27 MHz clock. To disable sending the SDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.16.1.21 | ColumnfunctionAcquireTDTInterval | read-write | current | TDT interval This field shows or sets the interval between repetitions of the TDT, in units of a 27 MHz clock. To disable sending the TDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.16.1.22 | ColumnfunctionAcquireAACEncapsulation | read-write | current | AAC encapsulation This field shows or sets the encapsulation to use for AAC streams. |
| 1.3.6.1.4.1.35902.1.5.16.1.23 | ColumnfunctionAcquireDVBEncoding | read-write | current | DVB encoding This string shows or sets the encoding used to encode DVB strings. |
| 1.3.6.1.4.1.35902.1.5.16.1.24 | ColumnfunctionAcquireScteKeyframe | read-write | current | SCTE keyframe This field shows or sets if a keyframe must be generated on SCTE-104 messages. |
| 1.3.6.1.4.1.35902.1.5.16.1.25 | ColumnfunctionAcquireForcePESAlignment | read-write | current | Force PES alignment This field shows or sets if the PES alignment is forced for all outputs. |
| 1.3.6.1.4.1.35902.1.5.16.1.26 | ColumnfunctionAcquireServiceType | read-write | current | Service type This field shows or sets the service type that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.16.1.27 | ColumnfunctionAcquireKeyframeInterval | read-write | current | Keyframe interval This field shows or sets the interval (in units of a 27Mhz clock) between inserted keyframes in video transcode operations. Use 0 to disable … |
| 1.3.6.1.4.1.35902.1.5.17 | TablefunctionCopyLocalTable | not-accessible | current | List of configured copy local functions |
| 1.3.6.1.4.1.35902.1.5.17.1 | RowfunctionCopyLocalEntry | not-accessible | current | Properties for a single configured copy local function |
| 1.3.6.1.4.1.35902.1.5.17.1.1 | ColumnfunctionCopyLocalInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the copy local function. The input must be an extract node. The funct… |
| 1.3.6.1.4.1.35902.1.5.17.1.2 | ColumnfunctionCopyLocalOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the copy local function. The output must be a directory node. The o… |
| 1.3.6.1.4.1.35902.1.5.18 | TablefunctionCopySpriteTable | not-accessible | current | List of configured copy sprite functions |
| 1.3.6.1.4.1.35902.1.5.18.1 | RowfunctionCopySpriteEntry | not-accessible | current | Properties for a single configured copy sprite function |
| 1.3.6.1.4.1.35902.1.5.18.1.1 | ColumnfunctionCopySpriteInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the copy sprite function. The input must be an extract node. The func… |
| 1.3.6.1.4.1.35902.1.5.18.1.2 | ColumnfunctionCopySpriteOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the copy sprite function. The output must be a directory node. The … |
| 1.3.6.1.4.1.35902.1.5.18.1.3 | ColumnfunctionCopySpritePeriod | read-write | current | Sprite period This field shows or sets the number of milliseconds between two sprite images. |
| 1.3.6.1.4.1.35902.1.5.18.1.4 | ColumnfunctionCopySpriteRows | read-write | current | Rows This field shows or sets the number of rows in the sprite image. |
| 1.3.6.1.4.1.35902.1.5.18.1.5 | ColumnfunctionCopySpriteCols | read-write | current | Columns This field shows or sets the number of columns in the sprite image. |
| 1.3.6.1.4.1.35902.1.5.18.1.6 | ColumnfunctionCopySpriteWidth | read-write | current | Sprite width This field shows or sets the width of a sprite. |
| 1.3.6.1.4.1.35902.1.5.18.1.7 | ColumnfunctionCopySpriteHeight | read-write | current | Sprite height This field shows or sets the height of a sprite. |
| 1.3.6.1.4.1.35902.1.5.19 | TablefunctionCopyRemoteTable | not-accessible | current | List of configured copy remote functions |
| 1.3.6.1.4.1.35902.1.5.19.1 | RowfunctionCopyRemoteEntry | not-accessible | current | Properties for a single configured copy remote function |
| 1.3.6.1.4.1.35902.1.5.19.1.1 | ColumnfunctionCopyRemoteInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the copy remote function. The input must be an extract node. The func… |
| 1.3.6.1.4.1.35902.1.5.19.1.2 | ColumnfunctionCopyRemoteProtocol | read-write | current | Protocol This field shows or sets the protocol used to connect to the remote server. |
| 1.3.6.1.4.1.35902.1.5.19.1.3 | ColumnfunctionCopyRemoteServer | read-write | current | Server This field shows or sets the address of the remote server. It can be an IPv4 address or a DNS name. |
| 1.3.6.1.4.1.35902.1.5.19.1.4 | ColumnfunctionCopyRemotePort | read-write | current | Port This field shows or sets the port of the remote server. Set to 0 to use the default port of the protocol. |
| 1.3.6.1.4.1.35902.1.5.19.1.5 | ColumnfunctionCopyRemoteUser | read-write | current | User This field shows or sets the user name to log into the remote server. |
| 1.3.6.1.4.1.35902.1.5.19.1.6 | ColumnfunctionCopyRemotePassword | read-write | current | Password This field sets the password to log into the remote server. |
| 1.3.6.1.4.1.35902.1.5.19.1.7 | ColumnfunctionCopyRemotePath | read-write | current | Path This field shows or sets the working directory path to use. If it is left empty, no cd command will be issued. |
| 1.3.6.1.4.1.35902.1.5.19.1.8 | ColumnfunctionCopyRemoteProxy | read-write | current | Proxy This field shows or sets the proxy to use to connect to the server. It it is left empty, no proxy will be used. The syntax of this field is a URI. |
| 1.3.6.1.4.1.35902.1.5.20 | TablefunctionMuxTable | not-accessible | current | List of configured mux functions |
| 1.3.6.1.4.1.35902.1.5.20.1 | RowfunctionMuxEntry | not-accessible | current | Properties for a single configured mux function |
| 1.3.6.1.4.1.35902.1.5.20.1.1 | ColumnfunctionMuxOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the mux function. The output must be a net or local node. The funct… |
| 1.3.6.1.4.1.35902.1.5.20.1.2 | ColumnfunctionMuxMode | read-write | current | Mux mode This field shows or sets the current TS mux mode. |
| 1.3.6.1.4.1.35902.1.5.20.1.3 | ColumnfunctionMuxBitrate | read-write | current | Mux bitrate This field shows or sets the total (TS) bitrate of the output. If set to 0, bitrate will be automatically calculated. |
| 1.3.6.1.4.1.35902.1.5.20.1.4 | ColumnfunctionMuxBitratePadding | read-write | current | Padding bitrate This field shows or sets the bitrate added to the output as padding. |
| 1.3.6.1.4.1.35902.1.5.20.1.5 | ColumnfunctionMuxPATInterval | read-write | current | PAT interval This field shows or sets the interval between repetitions of the PAT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.20.1.6 | ColumnfunctionMuxPMTInterval | read-write | current | PMT interval This field shows or sets the interval between repetitions of the PMT, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.20.1.7 | ColumnfunctionMuxPCRInterval | read-write | current | PCR interval This field shows or sets the interval between PCRs, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.5.20.1.8 | ColumnfunctionMuxTSID | read-write | current | TS ID This field shows or sets the transport stream ID for the outgoing stream. |
| 1.3.6.1.4.1.35902.1.5.20.1.9 | ColumnfunctionMuxNetworkID | read-write | current | Network ID This number shows or sets the network ID that is written in the NIT of an outgoing stream (if DVB conformance is enabled). Network IDs should be reg… |
| 1.3.6.1.4.1.35902.1.5.20.1.10 | ColumnfunctionMuxNetworkName | read-write | current | Network Name This string shows or sets the network name that is written in the NIT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.5.20.1.11 | ColumnfunctionMuxOriginalNetworkID | read-write | current | Original Network ID This number shows or sets the original network ID that is written in the SDT of an outgoing stream (if DVB conformance is enabled). Network… |
| 1.3.6.1.4.1.35902.1.5.20.1.12 | ColumnfunctionMuxNITInterval | read-write | current | NIT interval This field shows or sets the interval between repetitions of the NIT, in units of a 27 MHz clock. To disable sending the NIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.20.1.13 | ColumnfunctionMuxSDTInterval | read-write | current | SDT interval This field shows or sets the interval between repetitions of the SDT, in units of a 27 MHz clock. To disable sending the SDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.20.1.14 | ColumnfunctionMuxTDTInterval | read-write | current | TDT interval This field shows or sets the interval between repetitions of the TDT, in units of a 27 MHz clock. To disable sending the TDT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.5.20.1.15 | ColumnfunctionMuxAACEncapsulation | read-write | current | AAC encapsulation This field shows or sets the encapsulation to use for AAC streams. |
| 1.3.6.1.4.1.35902.1.5.20.1.16 | ColumnfunctionMuxDVBEncoding | read-write | current | DVB encoding This string shows or sets the encoding used to encode DVB strings. |
| 1.3.6.1.4.1.35902.1.5.20.1.17 | ColumnfunctionMuxBitrateEITs | read-write | current | EITs bitrate This field shows or sets the bitrate reserved for EIT schedules. |
| 1.3.6.1.4.1.35902.1.5.20.1.18 | ColumnfunctionMuxTOTCountry | read-write | current | TOT country This field shows or sets the country code inserted in the TOT. |
| 1.3.6.1.4.1.35902.1.5.20.1.19 | ColumnfunctionMuxTOTRegion | read-write | current | TOT region This field shows or sets the region ID inserted in the TOT. |
| 1.3.6.1.4.1.35902.1.5.20.1.20 | ColumnfunctionMuxTOTTimezone | read-write | current | TOT time zone This field shows or sets the time zone used to generated offsets in the TOT. |
| 1.3.6.1.4.1.35902.1.5.21 | TablefunctionMosaicTable | not-accessible | current | List of configured mosaic functions |
| 1.3.6.1.4.1.35902.1.5.21.1 | RowfunctionMosaicEntry | not-accessible | current | Properties for a single configured mosaic function |
| 1.3.6.1.4.1.35902.1.5.21.1.1 | ColumnfunctionMosaicInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the mosaic function, for the background. The input must be a video or… |
| 1.3.6.1.4.1.35902.1.5.21.1.2 | ColumnfunctionMosaicOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the mosaic function. The output must be a video node. The function … |
| 1.3.6.1.4.1.35902.1.5.21.1.3 | ColumnfunctionMosaicDelay | read-write | current | Delay This field shows or sets the delay to apply to the video in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.21.1.4 | ColumnfunctionMosaicFps | read-write | current | Frame rate This field shows or sets the frame rate of the mosaic. |
| 1.3.6.1.4.1.35902.1.5.21.1.5 | ColumnfunctionMosaicAspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the output frame. |
| 1.3.6.1.4.1.35902.1.5.21.1.6 | ColumnfunctionMosaicOverscan | read-write | current | Overscan This field shows or sets whether the overscan flag should be set on the output frame. |
| 1.3.6.1.4.1.35902.1.5.21.1.7 | ColumnfunctionMosaicWidth | read-write | current | Output width This field shows or sets the width of the output frame. |
| 1.3.6.1.4.1.35902.1.5.21.1.8 | ColumnfunctionMosaicHeight | read-write | current | Output height This field shows or sets the height of the output frame. |
| 1.3.6.1.4.1.35902.1.5.21.1.9 | ColumnfunctionMosaicRows | read-write | current | Rows This field shows or sets the number of rows in the mosaic. |
| 1.3.6.1.4.1.35902.1.5.21.1.10 | ColumnfunctionMosaicCols | read-write | current | Columns This field shows or sets the number of columns in the mosaic. |
| 1.3.6.1.4.1.35902.1.5.21.1.11 | ColumnfunctionMosaicLeftOffset | read-write | current | Left offset This field shows or sets the left offset in the output frame, after which the mosaic grid placement starts. |
| 1.3.6.1.4.1.35902.1.5.21.1.12 | ColumnfunctionMosaicRightOffset | read-write | current | Right offset This field shows or sets the right offset in the output frame, before which the mosaic grid placement ends. |
| 1.3.6.1.4.1.35902.1.5.21.1.13 | ColumnfunctionMosaicTopOffset | read-write | current | Top offset This field shows or sets the top offset in the output frame, after which the mosaic grid placement starts. |
| 1.3.6.1.4.1.35902.1.5.21.1.14 | ColumnfunctionMosaicBottomOffset | read-write | current | Bottom offset This field shows or sets the bottom offset in the output frame, before which the mosaic grid placement ends. |
| 1.3.6.1.4.1.35902.1.5.21.1.15 | ColumnfunctionMosaicLeftPadding | read-write | current | Left padding This field shows or sets the left padding before each cell in the grid. |
| 1.3.6.1.4.1.35902.1.5.21.1.16 | ColumnfunctionMosaicRightPadding | read-write | current | Right padding This field shows or sets the right padding after each cell in the grid. |
| 1.3.6.1.4.1.35902.1.5.21.1.17 | ColumnfunctionMosaicTopPadding | read-write | current | Top padding This field shows or sets the top padding before each cell in the grid. |
| 1.3.6.1.4.1.35902.1.5.21.1.18 | ColumnfunctionMosaicBottomPadding | read-write | current | Bottom padding This field shows or sets the bottom padding after each cell in the grid. |
| 1.3.6.1.4.1.35902.1.5.21.1.19 | ColumnfunctionMosaicAudioWidth | read-write | current | Audio bars width This field shows or sets the width of the audio bars. |
| 1.3.6.1.4.1.35902.1.5.21.1.20 | ColumnfunctionMosaicAudioAlpha | read-write | current | Audio bars alpha channel This field shows or sets the alpha channel of the audio bars. |
| 1.3.6.1.4.1.35902.1.5.21.1.21 | ColumnfunctionMosaicLabelHeight | read-write | current | Label height This field shows or sets the height of labels. When set to 0, labels are disabled. |
| 1.3.6.1.4.1.35902.1.5.21.1.22 | ColumnfunctionMosaicLabelForegroundColor | read-write | current | Label foreground color This field shows or sets the default foreground color for labels. |
| 1.3.6.1.4.1.35902.1.5.21.1.23 | ColumnfunctionMosaicLabelBackgroundColor | read-write | current | Label background color This field shows or sets the default background color for labels. |
| 1.3.6.1.4.1.35902.1.5.21.1.24 | ColumnfunctionMosaicLabelVerticalAlignment | read-write | current | Label vertical alignment This field shows or sets the vertical alignment for labels. |
| 1.3.6.1.4.1.35902.1.5.21.1.25 | ColumnfunctionMosaicChromaSubsampling | read-write | current | Chroma subsampling This field shows or sets the chroma subsampling applied to the mosaic. |
| 1.3.6.1.4.1.35902.1.5.21.1.26 | ColumnfunctionMosaicPerformance | read-write | current | Performance This field shows or sets the performance mode for the mosaic. Enable this option to use a lower quality scaling algorithm and disable deinterlacing. |
| 1.3.6.1.4.1.35902.1.5.21.1.27 | ColumnfunctionMosaicComponentsLayout | read-write | current | Components layout This field shows or sets the layout of chroma components for the mosaic frames. |
| 1.3.6.1.4.1.35902.1.5.22 | TablefunctionGridHintTable | not-accessible | current | List of configured grid hint functions |
| 1.3.6.1.4.1.35902.1.5.22.1 | RowfunctionGridHintEntry | not-accessible | current | Properties for a single configured grid hint function |
| 1.3.6.1.4.1.35902.1.5.22.1.1 | ColumnfunctionGridHintInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input to the grid hint function. The input must be a video node with fingerpr… |
| 1.3.6.1.4.1.35902.1.5.22.1.2 | ColumnfunctionGridHintOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the grid hint function. The output must be a video node. The funct… |
| 1.3.6.1.4.1.35902.1.5.22.1.3 | ColumnfunctionGridHintDelay | read-write | current | Delay This field shows or sets the delay to apply to the video in milliseconds. There must be sufficient delay to detect the reference sequences (twice the dur… |
| 1.3.6.1.4.1.35902.1.5.22.1.4 | ColumnfunctionGridHintFps | read-write | current | Frame rate This field shows or sets the frame rate used by the grid hint. |
| 1.3.6.1.4.1.35902.1.5.23 | TablefunctionMonitorDelayTable | not-accessible | current | List of configured monitor delay functions |
| 1.3.6.1.4.1.35902.1.5.23.1 | RowfunctionMonitorDelayEntry | not-accessible | current | Properties for a single configured monitor delay function |
| 1.3.6.1.4.1.35902.1.5.23.1.1 | ColumnfunctionMonitorDelayRefIndex | read-write | current | Reference node This field references an entry in the node table, to which other nodes are compared. The reference must be a video node with fingerprints enable… |
| 1.3.6.1.4.1.35902.1.5.23.1.2 | ColumnfunctionMonitorDelayMax | read-write | current | Max delay This field shows or sets the maximum delay this function can detect, in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.23.1.3 | ColumnfunctionMonitorDelayFps | read-write | current | Frame rate This field shows or sets the frame rate used for the delay comparison. |
| 1.3.6.1.4.1.35902.1.5.24 | TablefunctionMonitorStillTable | not-accessible | current | List of configured monitor still functions |
| 1.3.6.1.4.1.35902.1.5.24.1 | RowfunctionMonitorStillEntry | not-accessible | current | Properties for a single configured monitor still function |
| 1.3.6.1.4.1.35902.1.5.24.1.1 | ColumnfunctionMonitorStillInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input to the monitor still function. The input must be a video or pointer nod… |
| 1.3.6.1.4.1.35902.1.5.24.1.2 | ColumnfunctionMonitorStillDuration | read-write | current | Still frame duration This field shows or sets the duration in milliseconds above which a still picture is considered an error. |
| 1.3.6.1.4.1.35902.1.5.24.1.3 | ColumnfunctionMonitorStillAlgo | read-write | current | Algorithm This field shows or sets the monitor still detection algorithm. |
| 1.3.6.1.4.1.35902.1.5.24.1.4 | ColumnfunctionMonitorStillNoise | read-write | current | Noise level This field shows or sets the monitor still noise level. |
| 1.3.6.1.4.1.35902.1.5.24.1.5 | ColumnfunctionMonitorStillWidth | read-write | current | Width This field shows or sets the still frame width. |
| 1.3.6.1.4.1.35902.1.5.24.1.6 | ColumnfunctionMonitorStillHeight | read-write | current | Height This field shows or sets the still frame height. |
| 1.3.6.1.4.1.35902.1.5.25 | TablefunctionOverlayTable | not-accessible | current | List of configured overlay functions |
| 1.3.6.1.4.1.35902.1.5.25.1 | RowfunctionOverlayEntry | not-accessible | current | Properties for a single configured overlay function |
| 1.3.6.1.4.1.35902.1.5.25.1.1 | ColumnfunctionOverlayInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the overlay function, for the background. The input must be a video o… |
| 1.3.6.1.4.1.35902.1.5.25.1.2 | ColumnfunctionOverlayOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the overlay function. The output must be a video node. The function… |
| 1.3.6.1.4.1.35902.1.5.25.1.3 | ColumnfunctionOverlayDelay | read-write | current | Delay This field shows or sets the delay to apply to the video in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.25.1.4 | ColumnfunctionOverlayFps | read-write | current | Frame rate This field shows or sets the frame rate of the overlay video. |
| 1.3.6.1.4.1.35902.1.5.25.1.5 | ColumnfunctionOverlayAspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the output frame. |
| 1.3.6.1.4.1.35902.1.5.25.1.6 | ColumnfunctionOverlayOverscan | read-write | current | Overscan This field shows or sets whether the overscan flag should be set on the output frame. |
| 1.3.6.1.4.1.35902.1.5.25.1.7 | ColumnfunctionOverlayWidth | read-write | current | Output width This field shows or sets the width of the output frame. |
| 1.3.6.1.4.1.35902.1.5.25.1.8 | ColumnfunctionOverlayHeight | read-write | current | Output height This field shows or sets the height of the output frame. |
| 1.3.6.1.4.1.35902.1.5.25.1.9 | ColumnfunctionOverlayChromaSubsampling | read-write | current | Chroma subsampling This field shows or sets the chroma subsampling applied to the output frame. |
| 1.3.6.1.4.1.35902.1.5.25.1.10 | ColumnfunctionOverlayComponentsLayout | read-write | current | Components layout This field shows or sets the layout of chroma components for the output frame. |
| 1.3.6.1.4.1.35902.1.5.26 | TablefunctionMonitorR128Table | not-accessible | current | List of configured monitor r128 functions |
| 1.3.6.1.4.1.35902.1.5.26.1 | RowfunctionMonitorR128Entry | not-accessible | current | Properties for a single configured monitor r128 function |
| 1.3.6.1.4.1.35902.1.5.26.1.1 | ColumnfunctionMonitorR128InputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the monitor r128 function. The input must be an audio node with EBU R… |
| 1.3.6.1.4.1.35902.1.5.26.1.2 | ColumnfunctionMonitorR128Duration | read-write | current | Error duration This field shows or sets the duration in milliseconds above which an error condition is reported. |
| 1.3.6.1.4.1.35902.1.5.26.1.3 | ColumnfunctionMonitorR128MomentaryMin | read-write | current | Minimum momentary This field shows or sets the minimum momentary loudness allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.26.1.4 | ColumnfunctionMonitorR128MomentaryMax | read-write | current | Maximum momentary This field shows or sets the maximum momentary loudness allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.26.1.5 | ColumnfunctionMonitorR128LRAMin | read-write | current | Minimum range This field shows or sets the minimum loudness range allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.26.1.6 | ColumnfunctionMonitorR128LRAMax | read-write | current | Maximum range This field shows or sets the maximum loudness range allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.26.1.7 | ColumnfunctionMonitorR128GlobalMin | read-write | current | Minimum global This field shows or sets the minimum global loudness allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.26.1.8 | ColumnfunctionMonitorR128GlobalMax | read-write | current | Maximum global This field shows or sets the maximum global loudness allowed, in tenths of LUFS. |
| 1.3.6.1.4.1.35902.1.5.27 | TablefunctionMonitorFailoverTable | not-accessible | current | List of configured monitor failover functions |
| 1.3.6.1.4.1.35902.1.5.27.1 | RowfunctionMonitorFailoverEntry | not-accessible | current | Properties for a single configured monitor failover function |
| 1.3.6.1.4.1.35902.1.5.27.1.1 | ColumnfunctionMonitorFailoverInputIndex | read-write | current | Net node This field references an entry in the node table, which is used to send and receive the announcements of the master server. It must be a net node. |
| 1.3.6.1.4.1.35902.1.5.27.1.2 | ColumnfunctionMonitorFailoverPriority | read-write | current | Priority This field shows or sets the priority of this server in the cluster. |
| 1.3.6.1.4.1.35902.1.5.27.1.3 | ColumnfunctionMonitorFailoverPeriod | read-write | current | Period This field shows or sets the period between announcements of the master server, in milliseconds. It should be more than your network latency. |
| 1.3.6.1.4.1.35902.1.5.27.1.4 | ColumnfunctionMonitorFailoverDead | read-write | current | Master death This field shows or sets the number of idle periods to wait before deciding the master is dead and taking over. |
| 1.3.6.1.4.1.35902.1.5.27.1.5 | ColumnfunctionMonitorFailoverStartupDelay | read-write | current | Startup delay This field shows or sets the delay in milliseconds to wait at startup before going up if no packet are received. |
| 1.3.6.1.4.1.35902.1.5.28 | TablefunctionSwitchTable | not-accessible | current | List of configured switch functions |
| 1.3.6.1.4.1.35902.1.5.28.1 | RowfunctionSwitchEntry | not-accessible | current | Properties for a single configured switch function |
| 1.3.6.1.4.1.35902.1.5.28.1.1 | ColumnfunctionSwitchOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the switch function. It must be a net, pointer or local node. |
| 1.3.6.1.4.1.35902.1.5.28.1.2 | ColumnfunctionSwitchBack | read-write | current | Switch back This field specifies whether the switch function returns to a lower rank input when it becomes available, or only when the current input becomes un… |
| 1.3.6.1.4.1.35902.1.5.28.1.3 | ColumnfunctionSwitchOnChange | read-write | current | Switch on change If switch back is disabled, this field specifies whether the switch function returns to a lower rank input when the currently playing switch o… |
| 1.3.6.1.4.1.35902.1.5.29 | TablefunctionDescrambleTable | not-accessible | current | List of configured descramble functions |
| 1.3.6.1.4.1.35902.1.5.29.1 | RowfunctionDescrambleEntry | not-accessible | current | Properties for a single configured descramble function |
| 1.3.6.1.4.1.35902.1.5.29.1.1 | ColumnfunctionDescrambleMode | read-write | current | Descrambling mode This field shows or sets the scrambling algorithm. |
| 1.3.6.1.4.1.35902.1.5.29.1.2 | ColumnfunctionDescrambleControlWord | read-write | current | Control Word This field allows the user to enter control word for descrambling. The format is 12 or 16 hexadecimal digits without any space (e.g. '1234567890Ab… |
| 1.3.6.1.4.1.35902.1.5.29.1.3 | ColumnfunctionDescrambleLatency | read-write | current | Fixed latency This field allows the user to enter the fixed function latency in milliseconds. May use more CPU if the latency set is too low. |
| 1.3.6.1.4.1.35902.1.5.29.1.4 | ColumnfunctionDescrambleInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the descramble function. It must be a net, pointer or local node. |
| 1.3.6.1.4.1.35902.1.5.29.1.5 | ColumnfunctionDescrambleOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the descramble function. It must be a net or local node. |
| 1.3.6.1.4.1.35902.1.5.30 | TablefunctionScrambleTable | not-accessible | current | List of configured scramble functions |
| 1.3.6.1.4.1.35902.1.5.30.1 | RowfunctionScrambleEntry | not-accessible | current | Properties for a single configured scramble function |
| 1.3.6.1.4.1.35902.1.5.30.1.1 | ColumnfunctionScrambleMode | read-write | current | Scrambling mode This field shows or sets the scrambling algorithm. |
| 1.3.6.1.4.1.35902.1.5.30.1.2 | ColumnfunctionScrambleControlWord | read-write | current | Control Word This field allows the user to enter control word for scrambling. The format is 12 or 16 hexadecimal digits without any space (e.g. '1234567890Ab'). |
| 1.3.6.1.4.1.35902.1.5.30.1.3 | ColumnfunctionScrambleLatency | read-write | current | Fixed latency This field allows the user to enter the fixed function latency in milliseconds. May use more CPU if the latency set is too low. |
| 1.3.6.1.4.1.35902.1.5.30.1.4 | ColumnfunctionScrambleInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the scramble function. It must be a net, pointer or local node. |
| 1.3.6.1.4.1.35902.1.5.30.1.5 | ColumnfunctionScrambleOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the scramble function. It must be a net or local node. |
| 1.3.6.1.4.1.35902.1.5.31 | TablefunctionWatermarkEmbedTable | not-accessible | current | List of configured watermark functions |
| 1.3.6.1.4.1.35902.1.5.31.1 | RowfunctionWatermarkEmbedEntry | not-accessible | current | Properties for a single configured watermark function |
| 1.3.6.1.4.1.35902.1.5.31.1.1 | ColumnfunctionWatermarkEmbedInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the watermark embed function. It must be an audio or pointer node. |
| 1.3.6.1.4.1.35902.1.5.31.1.2 | ColumnfunctionWatermarkEmbedOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the watermark embed function. It must be an audio node. |
| 1.3.6.1.4.1.35902.1.5.31.1.3 | ColumnfunctionWatermarkEmbedLicense | read-write | current | License This string specifies the Kantar Media license as a string. |
| 1.3.6.1.4.1.35902.1.5.31.1.4 | ColumnfunctionWatermarkEmbedAudienceLicense | read-write | current | Audience license This string specifies the Kantar Media audience license as a string. |
| 1.3.6.1.4.1.35902.1.5.31.1.5 | ColumnfunctionWatermarkEmbedPassword | read-write | current | License password This field allows the user to enter the password for the license file. |
| 1.3.6.1.4.1.35902.1.5.31.1.6 | ColumnfunctionWatermarkEmbedChannel | read-write | current | Channel name This field allows the user to enter the channel name to use. |
| 1.3.6.1.4.1.35902.1.5.32 | TablefunctionWatermarkDetectTable | not-accessible | current | List of configured watermark functions |
| 1.3.6.1.4.1.35902.1.5.32.1 | RowfunctionWatermarkDetectEntry | not-accessible | current | Properties for a single configured watermark function |
| 1.3.6.1.4.1.35902.1.5.32.1.1 | ColumnfunctionWatermarkDetectInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the watermark detect function. It must be an audio or pointer node. |
| 1.3.6.1.4.1.35902.1.5.32.1.2 | ColumnfunctionWatermarkDetectLicense | read-write | current | License This string specifies the Kantar Media license as a string. |
| 1.3.6.1.4.1.35902.1.5.32.1.3 | ColumnfunctionWatermarkDetectLastEventID | read-only | current | Last event ID This field shows the last event ID of the watermark detect function. |
| 1.3.6.1.4.1.35902.1.5.32.1.4 | ColumnfunctionWatermarkDetectLastTimestamp | read-only | current | Last detected timestamp This field shows the last detected timestamp. |
| 1.3.6.1.4.1.35902.1.5.32.1.5 | ColumnfunctionWatermarkDetectLastConfidence | read-only | current | Last confidence This field shows the last event confidence of the watermark detect function. |
| 1.3.6.1.4.1.35902.1.5.32.1.6 | ColumnfunctionWatermarkDetectLastTechnology | read-only | current | Last technology This field shows the last event technology of the watermark detect function. |
| 1.3.6.1.4.1.35902.1.5.32.1.7 | ColumnfunctionWatermarkDetectScheduleIndex | read-write | current | Detect schedule This field references an entry in the schedule table, which is triggered when a watermark event occurs. |
| 1.3.6.1.4.1.35902.1.5.33 | TablefunctionTransmitSrtInputTable | not-accessible | current | List of configured transmit SRT input functions |
| 1.3.6.1.4.1.35902.1.5.33.1 | RowfunctionTransmitSrtInputEntry | not-accessible | current | Properties for a single configured transmit SRT input function |
| 1.3.6.1.4.1.35902.1.5.33.1.1 | ColumnfunctionTransmitSrtInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the transmit SRT input function. The input must be a network node. Th… |
| 1.3.6.1.4.1.35902.1.5.33.1.2 | ColumnfunctionTransmitSrtInputMode | read-write | current | Connection mode The field shows or sets the connection mode. caller: the agent sends the connection request to the peer, which must be listener. listener: the … |
| 1.3.6.1.4.1.35902.1.5.33.1.3 | ColumnfunctionTransmitSrtInputLatency | read-write | current | Latency The field shows or sets the amount of time (in milliseconds) to wait for incoming packets to arrive, before outputting them. It should be enough to cov… |
| 1.3.6.1.4.1.35902.1.5.33.1.4 | ColumnfunctionTransmitSrtInputEncryption | read-write | current | Encryption The field shows or sets the encryption type. |
| 1.3.6.1.4.1.35902.1.5.33.1.5 | ColumnfunctionTransmitSrtInputPassphrase | read-write | current | Passphrase The field shows or sets the shared secret used for encryption. It should be 10-79 characters. Leave empty to disable encryption. |
| 1.3.6.1.4.1.35902.1.5.33.1.6 | ColumnfunctionTransmitSrtInputBufferSize | read-write | current | Buffer size The field shows or sets the size (in packets) of the receive buffer. |
| 1.3.6.1.4.1.35902.1.5.33.1.7 | ColumnfunctionTransmitSrtInputIdleTimeout | read-write | current | Idle timeout The field shows or sets the maximum time (in milliseconds) to wait until any packet is received from peer since the last such packet reception. If… |
| 1.3.6.1.4.1.35902.1.5.33.1.8 | ColumnfunctionTransmitSrtInputDropTimeout | read-write | current | Drop timeout The field shows or sets the amount of time (in seconds) after which the connection is reset if packets are being dropped without any retransmissio… |
| 1.3.6.1.4.1.35902.1.5.34 | TablefunctionTransmitSrtOutputTable | not-accessible | current | List of configured transmit SRT output functions |
| 1.3.6.1.4.1.35902.1.5.34.1 | RowfunctionTransmitSrtOutputEntry | not-accessible | current | Properties for a single configured transmit SRT output function |
| 1.3.6.1.4.1.35902.1.5.34.1.1 | ColumnfunctionTransmitSrtOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the transmit SRT output function. The input must be a network node.… |
| 1.3.6.1.4.1.35902.1.5.34.1.2 | ColumnfunctionTransmitSrtOutputMode | read-write | current | Connection mode The field shows or sets the connection mode. caller: the agent sends the connection request to the peer, which must be listener. listener: the … |
| 1.3.6.1.4.1.35902.1.5.34.1.3 | ColumnfunctionTransmitSrtOutputPeerLatency | read-write | current | Peer latency The field shows or sets the minimum latency value (in milliseconds) for the receiver. The latency is the amount of time to wait for incoming packe… |
| 1.3.6.1.4.1.35902.1.5.34.1.4 | ColumnfunctionTransmitSrtOutputEncryption | read-write | current | Encryption The field shows or sets the encryption type. |
| 1.3.6.1.4.1.35902.1.5.34.1.5 | ColumnfunctionTransmitSrtOutputPassphrase | read-write | current | Passphrase The field shows or sets the shared secret used for encryption. It should be 10-79 characters. Leave empty to disable encryption. |
| 1.3.6.1.4.1.35902.1.5.34.1.6 | ColumnfunctionTransmitSrtOutputBufferSize | read-write | current | Buffer size The field shows or sets the size (in packets) of the send buffer. |
| 1.3.6.1.4.1.35902.1.5.34.1.7 | ColumnfunctionTransmitSrtOutputIdleTimeout | read-write | current | Idle timeout The field shows or sets the maximum time (in milliseconds) to wait until any packet is received from peer since the last such packet reception. If… |
| 1.3.6.1.4.1.35902.1.5.35 | TablefunctionTransmitRistInputTable | not-accessible | current | List of configured transmit RIST input functions |
| 1.3.6.1.4.1.35902.1.5.35.1 | RowfunctionTransmitRistInputEntry | not-accessible | current | Properties for a single configured transmit RIST input function |
| 1.3.6.1.4.1.35902.1.5.35.1.1 | ColumnfunctionTransmitRistInputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the transmit RIST input function. The output must be a net or local… |
| 1.3.6.1.4.1.35902.1.5.35.1.2 | ColumnfunctionTransmitRistInputLatency | read-write | current | Latency The field shows or sets the amount of time (in milliseconds) to wait for incoming packets to arrive, before outputting them. It should be enough to cov… |
| 1.3.6.1.4.1.35902.1.5.35.1.3 | ColumnfunctionTransmitRistInputRecovered | read-only | current | Recovered packets rate This field shows the current rate of recovered packets. |
| 1.3.6.1.4.1.35902.1.5.35.1.4 | ColumnfunctionTransmitRistInputLost | read-only | current | Lost packets rate This field shows the current rate of lost packets. |
| 1.3.6.1.4.1.35902.1.5.36 | TablefunctionTransmitRistOutputTable | not-accessible | current | List of configured transmit RIST output functions |
| 1.3.6.1.4.1.35902.1.5.36.1 | RowfunctionTransmitRistOutputEntry | not-accessible | current | Properties for a single configured transmit RIST output function |
| 1.3.6.1.4.1.35902.1.5.36.1.1 | ColumnfunctionTransmitRistOutputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the transmit RIST output function. The input must be a net, pointer o… |
| 1.3.6.1.4.1.35902.1.5.36.1.2 | ColumnfunctionTransmitRistOutputLatency | read-write | current | Latency The field shows or sets the amount of time (in milliseconds) to wait for packet retransmit queries to arrive, before dropping them. It should be enough… |
| 1.3.6.1.4.1.35902.1.5.37 | TablefunctionTransmitFecInputTable | not-accessible | current | List of configured transmit FEC input functions |
| 1.3.6.1.4.1.35902.1.5.37.1 | RowfunctionTransmitFecInputEntry | not-accessible | current | Properties for a single configured transmit FEC input function |
| 1.3.6.1.4.1.35902.1.5.37.1.1 | ColumnfunctionTransmitFecInputInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the transmit FEC input function. It must be a net node. |
| 1.3.6.1.4.1.35902.1.5.37.1.2 | ColumnfunctionTransmitFecInputOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the transmit FEC input function. It must be a net or local node. |
| 1.3.6.1.4.1.35902.1.5.37.1.3 | ColumnfunctionTransmitFecInputProtectionLevel | read-write | current | Protection level This field specifies the SMPTE 2022-1 FEC protection level. Level A: one FEC stream. Level B: two simultaneous FEC streams. |
| 1.3.6.1.4.1.35902.1.5.37.1.4 | ColumnfunctionTransmitFecInputCols | read-only | current | FEC columns (L) This field shows the detected FEC columns. |
| 1.3.6.1.4.1.35902.1.5.37.1.5 | ColumnfunctionTransmitFecInputRows | read-only | current | FEC rows (D) This field shows the detected FEC rows. |
| 1.3.6.1.4.1.35902.1.5.37.1.6 | ColumnfunctionTransmitFecInputRecovered | read-only | current | Recovered packets rate This field shows the current rate of recovered packets. |
| 1.3.6.1.4.1.35902.1.5.37.1.7 | ColumnfunctionTransmitFecInputLost | read-only | current | Lost packets rate This field shows the current rate of lost packets. |
| 1.3.6.1.4.1.35902.1.5.37.1.8 | ColumnfunctionTransmitFecInputRecoveredCount | read-only | current | Recovered packets This field shows the current count of recovered packets. |
| 1.3.6.1.4.1.35902.1.5.37.1.9 | ColumnfunctionTransmitFecInputLostCount | read-only | current | Lost packets This field shows the current count of lost packets. |
| 1.3.6.1.4.1.35902.1.5.37.1.10 | ColumnfunctionTransmitFecInputLatency | read-only | current | Latency This field shows the current latency (in milliseconds) incurred by the FEC process. |
| 1.3.6.1.4.1.35902.1.5.37.1.11 | ColumnfunctionTransmitFecInputMaxLatency | read-write | current | Max latency This field shows or sets the maximum latency (in milliseconds) incurred by the FEC process. Set to 0 to disable the latency limit. |
| 1.3.6.1.4.1.35902.1.5.38 | TablefunctionTransmitFecOutputTable | not-accessible | current | List of configured transmit FEC output functions |
| 1.3.6.1.4.1.35902.1.5.38.1 | RowfunctionTransmitFecOutputEntry | not-accessible | current | Properties for a single configured transmit FEC output function |
| 1.3.6.1.4.1.35902.1.5.38.1.1 | ColumnfunctionTransmitFecOutputInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the transmit FEC output function. It must be a net, pointer or local… |
| 1.3.6.1.4.1.35902.1.5.38.1.2 | ColumnfunctionTransmitFecOutputOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the transmit FEC output function. It must be a net node. |
| 1.3.6.1.4.1.35902.1.5.38.1.3 | ColumnfunctionTransmitFecOutputProtectionLevel | read-write | current | Protection level This field specifies the SMPTE 2022-1 FEC protection level. Level A: one FEC stream. Level B: two simultaneous FEC streams. |
| 1.3.6.1.4.1.35902.1.5.38.1.4 | ColumnfunctionTransmitFecOutputCols | read-write | current | FEC columns (L) This field shows or sets the number of FEC columns (1 ≤ L ≤ 20, L ≥ 4 for level B). |
| 1.3.6.1.4.1.35902.1.5.38.1.5 | ColumnfunctionTransmitFecOutputRows | read-write | current | FEC rows (D) This field shows or sets the number of FEC rows (4 ≤ D ≤ 20). |
| 1.3.6.1.4.1.35902.1.5.39 | TablefunctionCropTable | not-accessible | current | List of configured crop functions |
| 1.3.6.1.4.1.35902.1.5.39.1 | RowfunctionCropEntry | not-accessible | current | Properties for a single configured crop function |
| 1.3.6.1.4.1.35902.1.5.39.1.1 | ColumnfunctionCropInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the crop function. The input must be a video or pointer node. If 0, a… |
| 1.3.6.1.4.1.35902.1.5.39.1.2 | ColumnfunctionCropOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the crop function. The output must be a video node. The function ca… |
| 1.3.6.1.4.1.35902.1.5.39.1.3 | ColumnfunctionCropDelay | read-write | current | Delay This field shows or sets the delay to apply to the video in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.39.1.4 | ColumnfunctionCropFps | read-write | current | Frame rate This field shows or sets the frame rate of the crop video. |
| 1.3.6.1.4.1.35902.1.5.39.1.5 | ColumnfunctionCropAspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the output frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.6 | ColumnfunctionCropOverscan | read-write | current | Overscan This field shows or sets whether the overscan flag should be set on the output frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.7 | ColumnfunctionCropWidth | read-write | current | Input width This field shows or sets the width of the input frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.8 | ColumnfunctionCropHeight | read-write | current | Input height This field shows or sets the height of the input frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.9 | ColumnfunctionCropLeftOffset | read-write | current | Left offset This field shows or sets the left offset in the input frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.10 | ColumnfunctionCropRigthOffset | read-write | current | Right offset This field shows or sets the right offset in the input frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.11 | ColumnfunctionCropTopOffset | read-write | current | Top offset This field shows or sets the top offset in the input frame. |
| 1.3.6.1.4.1.35902.1.5.39.1.12 | ColumnfunctionCropBottomOffset | read-write | current | Bottom offset This field shows or sets the bottom offset in the input frame. |
| 1.3.6.1.4.1.35902.1.5.40 | TablefunctionPackageTable | not-accessible | current | List of configured package functions |
| 1.3.6.1.4.1.35902.1.5.40.1 | RowfunctionPackageEntry | not-accessible | current | Properties for a single configured package function |
| 1.3.6.1.4.1.35902.1.5.40.1.1 | ColumnfunctionPackageInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the package function. It must be a net, pointer or local node. |
| 1.3.6.1.4.1.35902.1.5.40.1.2 | ColumnfunctionPackageOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the package function. It must be a package origin, amazon s3 or ht… |
| 1.3.6.1.4.1.35902.1.5.40.1.3 | ColumnfunctionPackageSID | read-write | current | Service ID If the input stream is a multi-program transport stream, this configures the service ID to take into account. |
| 1.3.6.1.4.1.35902.1.5.40.1.4 | ColumnfunctionPackagePrefix | read-write | current | Prefix This field shows or sets the prefix that will be prepended to all URI. |
| 1.3.6.1.4.1.35902.1.5.40.1.5 | ColumnfunctionPackageSegmentDuration | read-write | current | Segment duration This field shows or sets the intended duration of a media segment, in milliseconds. Incoming streams have to be encoded with a compatible gop … |
| 1.3.6.1.4.1.35902.1.5.40.1.6 | ColumnfunctionPackagePlaylistDuration | read-write | current | Playlist duration This field shows or sets the minimum duration of a media playlist or representation, in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.40.1.7 | ColumnfunctionPackageHls | read-write | current | Enable HLS Enable this to package for HLS. |
| 1.3.6.1.4.1.35902.1.5.40.1.8 | ColumnfunctionPackageHlsPath | read-write | current | HLS playlist path This field shows or sets the path at which the HLS multivariant playlist will be made available, when enabled (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.5.40.1.9 | ColumnfunctionPackageHlsMinVersion | read-write | current | HLS minimum version This field shows or sets the minimum syntax version of the HLS playlists, when enabled. |
| 1.3.6.1.4.1.35902.1.5.40.1.10 | ColumnfunctionPackageProgramDateTimeDelay | read-write | current | Program date/time delay This field shows or sets the delay (in milliseconds) applied to the program absolute date and time. |
| 1.3.6.1.4.1.35902.1.5.40.1.11 | ColumnfunctionPackageHlsScte35Enhanced | read-write | current | SCTE-35 Enhanced This field shows or sets whether to output enhanced cue markers using the EXT-OATCLS-SCTE35, EXT-X-CUE-OUT, EXT-X-CUE-OUT-CONT and EXT-X-CUE-I… |
| 1.3.6.1.4.1.35902.1.5.40.1.12 | ColumnfunctionPackageCmafIngest | read-write | current | CMAF Ingest This field shows or sets whether to generate fMP4 segments conforming to the DASH-IF Live Media Ingest Protocol, Interface-1 (CMAF Ingest). |
| 1.3.6.1.4.1.35902.1.5.40.1.13 | ColumnfunctionPackageDash | read-write | current | Enable DASH Enable this to package for MPEG-DASH. |
| 1.3.6.1.4.1.35902.1.5.40.1.14 | ColumnfunctionPackageDashPath | read-write | current | DASH manifest path This field shows or sets the path at which the DASH manifest will be made available, when enabled (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.5.40.1.15 | ColumnfunctionPackagePersistent | read-write | current | Persistent This field shows or sets whether to keep old segments and playlists after they are no longer needed. This can be useful for live-to-vod use cases or… |
| 1.3.6.1.4.1.35902.1.5.40.1.16 | ColumnfunctionPackageTimingMode | read-write | current | Timing mode This field shows or sets the time synchronization method used by the package function. Independent package functions can produce identical timestam… |
| 1.3.6.1.4.1.35902.1.5.40.1.17 | ColumnfunctionPackageRecoveryURL | read-write | current | Recovery URL This field shows or sets the URL prefix from where media playlists may be recovered after startup. This can be used for improving failover behavio… |
| 1.3.6.1.4.1.35902.1.5.40.1.18 | ColumnfunctionPackageFailoverCount | read-write | current | Failover count This field shows or sets the number of package instances participating in a failover group. |
| 1.3.6.1.4.1.35902.1.5.40.1.19 | ColumnfunctionPackageFailoverIndex | read-write | current | Failover index This field shows or sets this package instance priority in the failover group. Lower indexes have higher priority. Each index must be unique in … |
| 1.3.6.1.4.1.35902.1.5.40.1.20 | ColumnfunctionPackageOutputLimit | read-write | current | Output limit This field shows or sets the lowest group of files that should be generated by the package function. This can be used to output only the multivari… |
| 1.3.6.1.4.1.35902.1.5.40.1.21 | ColumnfunctionPackageFailoverActiveCount | read-only | current | Failover active count This field shows the number of active package instances in the failover group. An active instance contributes to the merge process. |
| 1.3.6.1.4.1.35902.1.5.40.1.22 | ColumnfunctionPackageHlsSyncMediaSeq | read-write | current | Sync HLS media sequences This field shows or sets whether to synchronize media sequence numbers between HLS variant streams. If enabled, any missing segment in… |
| 1.3.6.1.4.1.35902.1.5.40.1.23 | ColumnfunctionPackageHlsSkipDaterangeTags | read-write | current | Skip HLS daterange tags This field shows or sets whether to prevent adding EXT-X-DATERANGE tags in HLS media playlists. |
| 1.3.6.1.4.1.35902.1.5.40.1.24 | ColumnfunctionPackageCleanupRemoteFiles | read-write | current | Cleanup remote files This field shows or sets whether to cleanup remote files from HTTP and S3 storages when the package function is stopped. |
| 1.3.6.1.4.1.35902.1.5.40.1.25 | ColumnfunctionPackageHlsScte35Asset | read-write | current | HLS SCTE-35 asset This field shows or sets the asset attribute specified in EXT-X-ASSET tags, when SCTE-35 Enhanced is enabled. The lack of attribute disables … |
| 1.3.6.1.4.1.35902.1.5.40.1.26 | ColumnfunctionPackageOutputRateLimit | read-write | current | Output rate limit This field shows or sets the output HTTP traffic rate limit, in percentage increase of the required variants bandwidth. Note that limiting ou… |
| 1.3.6.1.4.1.35902.1.5.40.1.27 | ColumnfunctionPackageDrmURL | read-write | current | DRM URL This field shows or sets the HTTP URL to the DRM key server. |
| 1.3.6.1.4.1.35902.1.5.40.1.28 | ColumnfunctionPackageDrmUser | read-write | current | DRM user This field shows or sets the user name to use for HTTP authentication to the DRM key server. |
| 1.3.6.1.4.1.35902.1.5.40.1.29 | ColumnfunctionPackageDrmPassword | read-write | current | DRM password This field sets the password to use for HTTP authentication to the DRM key server. |
| 1.3.6.1.4.1.35902.1.5.40.1.30 | ColumnfunctionPackageDrmContentId | read-write | current | DRM content ID This field shows or sets the content identifier for this asset. |
| 1.3.6.1.4.1.35902.1.5.40.1.31 | ColumnfunctionPackageWidevine | read-write | current | Widevine This field shows or sets whether the Google Widevine DRM system in enabled for this asset. |
| 1.3.6.1.4.1.35902.1.5.40.1.32 | ColumnfunctionPackagePlayReady | read-write | current | PlayReady This field shows or sets whether the Microsoft PlayReady DRM system in enabled for this asset. |
| 1.3.6.1.4.1.35902.1.5.40.1.33 | ColumnfunctionPackageFairPlayStreaming | read-write | current | FairPlay Streaming This field shows or sets whether the Apple FairPlay Streaming DRM system in enabled for this asset. |
| 1.3.6.1.4.1.35902.1.5.40.1.34 | ColumnfunctionPackageKeyRotationPeriod | read-write | current | Key rotation period This field shows or sets the key rotation period (in seconds). This allows to rotate the encryption key over time, for enhanced security. S… |
| 1.3.6.1.4.1.35902.1.5.40.1.35 | ColumnfunctionPackageHttpMaxRetries | read-write | current | HTTP max retries This field shows or sets the maximum number of retries for HTTP requests. Increasing this value will shorten the duration before a connection … |
| 1.3.6.1.4.1.35902.1.5.41 | TablefunctionGridFilterTable | not-accessible | current | List of configured grid filter functions |
| 1.3.6.1.4.1.35902.1.5.41.1 | RowfunctionGridFilterEntry | not-accessible | current | Properties for a single configured grid filter function |
| 1.3.6.1.4.1.35902.1.5.41.1.1 | ColumnfunctionGridFilterType | read-write | current | Filter Type This field shows or sets the type of filter graph used by the grid filter function. |
| 1.3.6.1.4.1.35902.1.5.41.1.2 | ColumnfunctionGridFilterGraphDescription | read-write | current | Graph description This field shows or sets the textual representation of the filter graph used by the grid filter function. |
| 1.3.6.1.4.1.35902.1.5.41.1.3 | ColumnfunctionGridFilterThreads | read-write | current | Filter threads This field shows or sets the maximum number of threads used by filters in this graph. Set to 0 for automatic detection. |
| 1.3.6.1.4.1.35902.1.5.42 | TablefunctionTransmitSpsInputTable | not-accessible | current | List of configured transmit SPS input functions |
| 1.3.6.1.4.1.35902.1.5.42.1 | RowfunctionTransmitSpsInputEntry | not-accessible | current | Properties for a single configured transmit SPS input function |
| 1.3.6.1.4.1.35902.1.5.42.1.1 | ColumnfunctionTransmitSpsInputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the transmit SPS input function. The output must be a net or local … |
| 1.3.6.1.4.1.35902.1.5.42.1.2 | ColumnfunctionTransmitSpsInputLatency | read-write | current | Latency The field shows or sets the amount of time (in milliseconds) to wait for incoming packets to arrive, before outputting them. It should be enough to cov… |
| 1.3.6.1.4.1.35902.1.5.43 | TablefunctionTransmitSpsOutputTable | not-accessible | current | List of configured transmit SPS output functions |
| 1.3.6.1.4.1.35902.1.5.43.1 | RowfunctionTransmitSpsOutputEntry | not-accessible | current | Properties for a single configured transmit SPS output function |
| 1.3.6.1.4.1.35902.1.5.43.1.1 | ColumnfunctionTransmitSpsOutputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the transmit SPS output function. The input must be a net, pointer or… |
| 1.3.6.1.4.1.35902.1.5.44 | TablefunctionGridPlayTable | not-accessible | current | List of configured grid play functions |
| 1.3.6.1.4.1.35902.1.5.44.1 | RowfunctionGridPlayEntry | not-accessible | current | Properties for a single configured grid play function |
| 1.3.6.1.4.1.35902.1.5.44.1.1 | ColumnfunctionGridPlayIndex | read-write | current | Play node This field references an entry in the node table, which is used as an output of the grid function. This must be a video tx node. The function cannot … |
| 1.3.6.1.4.1.35902.1.5.44.1.2 | ColumnfunctionGridPlayVideoInputIndex | read-write | current | Video node This field references an entry in the node table, which is used as a video input to the grid play function. The input must be a video or pointer nod… |
| 1.3.6.1.4.1.35902.1.5.44.1.3 | ColumnfunctionGridPlayWidth | read-write | current | Width This field shows or sets the width of the output video. |
| 1.3.6.1.4.1.35902.1.5.44.1.4 | ColumnfunctionGridPlayHeight | read-write | current | Height This field shows or sets the height of the output video. |
| 1.3.6.1.4.1.35902.1.5.44.1.5 | ColumnfunctionGridPlayInterlace | read-write | current | Interlace This field activates or deactivates interlacing of the output video. |
| 1.3.6.1.4.1.35902.1.5.44.1.6 | ColumnfunctionGridPlayFps | read-write | current | Frame rate This field shows or sets the frame rate of the output video. |
| 1.3.6.1.4.1.35902.1.5.44.1.7 | ColumnfunctionGridPlayVideoDelay | read-write | current | Video delay This field shows or sets the delay to apply to the video in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.45 | TablefunctionCopySubtitlesTable | not-accessible | current | List of configured copy subtitles functions |
| 1.3.6.1.4.1.35902.1.5.45.1 | RowfunctionCopySubtitlesEntry | not-accessible | current | Properties for a single configured copy subtitles function |
| 1.3.6.1.4.1.35902.1.5.45.1.1 | ColumnfunctionCopySubtitlesInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the copy subtitles function. The input must be an extract node. The f… |
| 1.3.6.1.4.1.35902.1.5.45.1.2 | ColumnfunctionCopySubtitlesOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the copy subtitles function. The output must be a directory node. T… |
| 1.3.6.1.4.1.35902.1.5.45.1.3 | ColumnfunctionCopySubtitlesTeletextMagazine | read-write | current | Teletext magazine This field shows or sets the Teletext magazine of the subtitles page to copy. |
| 1.3.6.1.4.1.35902.1.5.45.1.4 | ColumnfunctionCopySubtitlesTeletextPage | read-write | current | Teletext page This field shows or sets the Teletext page number of the subtitles page to copy. |
| 1.3.6.1.4.1.35902.1.5.45.1.5 | ColumnfunctionCopySubtitlesTextJustification | read-write | current | Text justification This field shows or sets whether horizontal alignment of the displayed subtitles is changed using justification codes. Otherwise the text pr… |
| 1.3.6.1.4.1.35902.1.5.45.1.6 | ColumnfunctionCopySubtitlesFormat | read-write | current | Format This field shows or sets the output format of the subtitles. |
| 1.3.6.1.4.1.35902.1.5.46 | TablefunctionTsFilterTable | not-accessible | current | List of configured TS filter functions |
| 1.3.6.1.4.1.35902.1.5.46.1 | RowfunctionTsFilterEntry | not-accessible | current | Properties for a single configured TS filter function |
| 1.3.6.1.4.1.35902.1.5.46.1.1 | ColumnfunctionTsFilterInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the TS filter function. The input must be a net, pointer or local nod… |
| 1.3.6.1.4.1.35902.1.5.46.1.2 | ColumnfunctionTsFilterOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the TS filter function. The output must be a net or local node, or … |
| 1.3.6.1.4.1.35902.1.5.46.1.3 | ColumnfunctionTsFilterParameters | read-write | current | Parameters This field shows or sets a JSON string describing the global parameters of the TS filter function. The JSON string describes an array of options (ex… |
| 1.3.6.1.4.1.35902.1.5.47 | TablefunctionTransmitRtpOutputTable | not-accessible | current | List of configured transmit RTP output functions |
| 1.3.6.1.4.1.35902.1.5.47.1 | RowfunctionTransmitRtpOutputEntry | not-accessible | current | Properties for a single configured transmit RTP output function |
| 1.3.6.1.4.1.35902.1.5.47.1.1 | ColumnfunctionTransmitRtpOutputInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the transmit RTP output function. The input must be a net node with … |
| 1.3.6.1.4.1.35902.1.5.47.1.2 | ColumnfunctionTransmitRtpOutputLatency | read-write | current | Latency The field shows or sets the latency value (in milliseconds) for the reordering and scheduling of the source RTP stream. |
| 1.3.6.1.4.1.35902.1.5.48 | TablefunctionGridInputAudioTable | not-accessible | current | List of configured grid input audio functions |
| 1.3.6.1.4.1.35902.1.5.48.1 | RowfunctionGridInputAudioEntry | not-accessible | current | Properties for a single configured grid input audio function |
| 1.3.6.1.4.1.35902.1.5.48.1.1 | ColumnfunctionGridInputAudioInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the grid function. The input must be a pcm node. The function cannot … |
| 1.3.6.1.4.1.35902.1.5.48.1.2 | ColumnfunctionGridInputAudioOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the grid function. The output must be an audio node. The function c… |
| 1.3.6.1.4.1.35902.1.5.48.1.3 | ColumnfunctionGridInputAudioDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.49 | TablefunctionGridOutputAudioTable | not-accessible | current | List of configured grid output audio functions |
| 1.3.6.1.4.1.35902.1.5.49.1 | RowfunctionGridOutputAudioEntry | not-accessible | current | Properties for a single configured grid output audio function |
| 1.3.6.1.4.1.35902.1.5.49.1.1 | ColumnfunctionGridOutputAudioInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the grid function. The input must be an audio or pointer node. The fu… |
| 1.3.6.1.4.1.35902.1.5.49.1.2 | ColumnfunctionGridOutputAudioOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the grid function. The output must be pcm node. The function cannot… |
| 1.3.6.1.4.1.35902.1.5.49.1.3 | ColumnfunctionGridOutputAudioDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.5.50 | TablefunctionDemuxMisTable | not-accessible | current | List of configured mis demux functions |
| 1.3.6.1.4.1.35902.1.5.50.1 | RowfunctionDemuxMisEntry | not-accessible | current | Properties for a single configured mis demux function |
| 1.3.6.1.4.1.35902.1.5.50.1.1 | ColumnfunctionDemuxMisInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the mis demux function. The input must be a DVB node with raw MIS sup… |
| 1.3.6.1.4.1.35902.1.5.51 | TablefunctionForwardNetTable | not-accessible | current | List of configured forward net functions |
| 1.3.6.1.4.1.35902.1.5.51.1 | RowfunctionForwardNetEntry | not-accessible | current | Properties for a single configured forward net function |
| 1.3.6.1.4.1.35902.1.5.51.1.1 | ColumnfunctionForwardNetInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input to the forward net function. The input must be a net, pointer or local n… |
| 1.3.6.1.4.1.35902.1.6 | NodeserverOperation | |||
| 1.3.6.1.4.1.35902.1.6.1 | TableoperationTable | not-accessible | current | List of configured operations |
| 1.3.6.1.4.1.35902.1.6.1.1 | RowoperationEntry | not-accessible | current | Properties for a single configured operation |
| 1.3.6.1.4.1.35902.1.6.1.1.1 | ColumnoperationIndex | not-accessible | current | Operation index |
| 1.3.6.1.4.1.35902.1.6.1.1.2 | ColumnoperationStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.6.1.1.3 | ColumnoperationType | read-create | current | Operation type |
| 1.3.6.1.4.1.35902.1.6.1.1.4 | ColumnoperationUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable an operation. |
| 1.3.6.1.4.1.35902.1.6.1.1.5 | ColumnoperationDepStatus | read-only | current | True if the operation has no dependency problem on a node |
| 1.3.6.1.4.1.35902.1.6.1.1.6 | ColumnoperationLicenseStatus | read-only | current | True if there is a license which enables this operation |
| 1.3.6.1.4.1.35902.1.6.1.1.7 | ColumnoperationOpStatus | read-only | current | True if the operation is operational |
| 1.3.6.1.4.1.35902.1.6.1.1.8 | ColumnoperationFunctionIndex | read-create | current | Function index This field references a function to which this operation is bound. An operation cannot be operational unless it is bound to an operational funct… |
| 1.3.6.1.4.1.35902.1.6.1.1.9 | ColumnoperationDownScheduleIndex | read-create | current | Down schedule This field references an entry in the schedule table, which is triggered when the operation goes down (if not null). |
| 1.3.6.1.4.1.35902.1.6.1.1.10 | ColumnoperationUpScheduleIndex | read-create | current | Up schedule This field references an entry in the schedule table, which is triggered when the operation goes up (if not null). |
| 1.3.6.1.4.1.35902.1.6.1.1.11 | ColumnoperationLastCleared | read-create | current | Last cleared This field shows the last time the counters were cleared. |
| 1.3.6.1.4.1.35902.1.6.1.1.12 | ColumnoperationDisabledAtStartup | read-create | current | Disabled at startup When enabled, the operation is disabled when the server starts up. |
| 1.3.6.1.4.1.35902.1.6.1.1.13 | ColumnoperationScheduleContext | read-create | current | Schedule context This field shows or sets the schedule environment variables. They can be defined using a whitespace separated list of key=value items. |
| 1.3.6.1.4.1.35902.1.6.1.1.14 | ColumnoperationName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.6.1.1.15 | ColumnoperationDepIndex | read-create | current | Depends on This field references a function on which this operation depends. The operation cannot be operational unless the function it depends on is up. |
| 1.3.6.1.4.1.35902.1.6.2 | TableoperationDemuxTable | not-accessible | current | List of configured demux operations |
| 1.3.6.1.4.1.35902.1.6.2.1 | RowoperationDemuxEntry | not-accessible | current | Properties for a single configured demux operation |
| 1.3.6.1.4.1.35902.1.6.2.1.1 | ColumnoperationDemuxOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used to output the selected PIDs read from the input node. The output must be a net or l… |
| 1.3.6.1.4.1.35902.1.6.2.1.2 | ColumnoperationDemuxSID | read-write | current | Service ID This number specifies a service ID (program number) that is looked for in the PAT. All PIDs specified in the respective PMT are selected and sent to… |
| 1.3.6.1.4.1.35902.1.6.2.1.3 | ColumnoperationDemuxPIDs | read-write | current | PIDs This string specifies a comma-separated list of PIDs to output. If a service ID is also specified, only the PIDs belonging to that service, and present in… |
| 1.3.6.1.4.1.35902.1.6.2.1.4 | ColumnoperationDemuxWatch | read-write | current | Permanent This menu specifies whether the respective service or PID selection is assumed to be running and descrambled 24/7. If it is checked, scrambling error… |
| 1.3.6.1.4.1.35902.1.6.2.1.5 | ColumnoperationDemuxDVB | read-write | current | DVB conformance tables This menu specifies whether DVB conformance tables are to be forwarded/created for this output. DVB compliance tables include SDT, NIT, … |
| 1.3.6.1.4.1.35902.1.6.2.1.6 | ColumnoperationDemuxEPG | read-write | current | EIT schedules This menu specifies whether, in addition to DVB conformance tables, EIT schedule tables bound to the service are also to be forwarded. |
| 1.3.6.1.4.1.35902.1.6.2.1.7 | ColumnoperationDemuxTSID | read-write | current | Transport Stream ID This number specifies the Transport Stream ID written in the PAT of the outgoing stream. The special value of -1 allows to forward the TSID… |
| 1.3.6.1.4.1.35902.1.6.2.1.8 | ColumnoperationDemuxRemapSID | read-write | current | Remap service ID This number specifies the service ID written in the outgoing stream. The special value of 0 allows to forward the SID of the incoming stream. |
| 1.3.6.1.4.1.35902.1.6.2.1.9 | ColumnoperationDemuxRemapPIDPMT | read-write | current | Remap PMT PID This number specifies the PID of the PMT written in the outgoing stream. The special value of 0 allows to use the same PID as in the incoming str… |
| 1.3.6.1.4.1.35902.1.6.2.1.10 | ColumnoperationDemuxRemapPIDVideo | read-write | current | Remap video PID This number specifies the PID of the video ES written in the outgoing stream. The special value of 0 allows to use the same PID as in the incom… |
| 1.3.6.1.4.1.35902.1.6.2.1.11 | ColumnoperationDemuxRemapPIDAudio | read-write | current | Remap audio PID This number specifies the PID of the audio ES written in the outgoing stream. The special value of 0 allows to use the same PID as in the incom… |
| 1.3.6.1.4.1.35902.1.6.2.1.12 | ColumnoperationDemuxRemapPIDSub | read-write | current | Remap subtitles PID This number specifies the PID of the subtitles ES written in the outgoing stream. The special value of 0 allows to use the same PID as in t… |
| 1.3.6.1.4.1.35902.1.6.2.1.13 | ColumnoperationDemuxRemapServiceName | read-write | current | Remap service name This field specifies the service name written in the SDT of the outgoing stream. If it is left empty, the service name will be the same as i… |
| 1.3.6.1.4.1.35902.1.6.2.1.14 | ColumnoperationDemuxRemapServiceProvider | read-write | current | Remap service provider This field specifies the service provider written in the SDT of the outgoing stream. If it is left empty, the service provider will be t… |
| 1.3.6.1.4.1.35902.1.6.2.1.15 | ColumnoperationDemuxRemapONID | read-write | current | Remap original network ID This number specifies the original network ID written in the outgoing stream. The special value of 0 allows to forward the ONID of th… |
| 1.3.6.1.4.1.35902.1.6.2.1.16 | ColumnoperationDemuxDVBEncoding | read-write | current | DVB encoding This string shows or sets the encoding used to encode DVB strings. |
| 1.3.6.1.4.1.35902.1.6.3 | TableoperationMonitorPIDTable | not-accessible | current | List of configured PID monitoring operations |
| 1.3.6.1.4.1.35902.1.6.3.1 | RowoperationMonitorPIDEntry | not-accessible | current | Properties for a single configured PID monitoring operation |
| 1.3.6.1.4.1.35902.1.6.3.1.1 | ColumnoperationMonitorPID | read-write | current | PID This field shows or sets the PID, which the monitoring function has to monitor. |
| 1.3.6.1.4.1.35902.1.6.3.1.2 | ColumnoperationMonitorPIDPES | read-write | current | Carries PES If this feature is not selected, the monitoring function will not expect valid PESs on this PID. |
| 1.3.6.1.4.1.35902.1.6.4 | TableoperationMonitorTypeTable | not-accessible | current | List of configured type monitoring operations |
| 1.3.6.1.4.1.35902.1.6.4.1 | RowoperationMonitorTypeEntry | not-accessible | current | Properties for a single configured type monitoring operation |
| 1.3.6.1.4.1.35902.1.6.4.1.1 | ColumnoperationMonitorType | read-write | current | Type This field shows or sets the type of elementary stream, or services, which the monitoring function has to monitor. |
| 1.3.6.1.4.1.35902.1.6.4.1.2 | ColumnoperationMonitorTypeMin | read-write | current | Min number This field shows or sets the minimum number of elementary streams/services of this type expected in the input node. |
| 1.3.6.1.4.1.35902.1.6.4.1.3 | ColumnoperationMonitorTypeMax | read-write | current | Max number This field shows or sets the maximum number of elementary streams/services of this type allowed in the input node. |
| 1.3.6.1.4.1.35902.1.6.5 | TableoperationPlayoutFileTable | not-accessible | current | List of configured file playout operations |
| 1.3.6.1.4.1.35902.1.6.5.1 | RowoperationPlayoutFileEntry | not-accessible | current | Properties for a single configured file playout operation |
| 1.3.6.1.4.1.35902.1.6.5.1.1 | ColumnoperationPlayoutFileInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the playout function. The input must be a file node. The operation ca… |
| 1.3.6.1.4.1.35902.1.6.5.1.2 | ColumnoperationPlayoutFileRank | read-write | current | Playout rank This field shows or sets the rank of the operation. Items are played by the playout function in the ascending rank order. |
| 1.3.6.1.4.1.35902.1.6.6 | TableoperationPlayoutFileCircularTable | not-accessible | current | List of configured circular file playout operations |
| 1.3.6.1.4.1.35902.1.6.6.1 | RowoperationPlayoutFileCircularEntry | not-accessible | current | Properties for a single configured circular file playout operation |
| 1.3.6.1.4.1.35902.1.6.6.1.1 | ColumnoperationPlayoutFileCircularInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the playout function. The input must be a file node. The operation ca… |
| 1.3.6.1.4.1.35902.1.6.6.1.2 | ColumnoperationPlayoutFileCircularRank | read-write | current | Playout rank This field shows or sets the rank of the operation. Items are played by the playout function in the ascending rank order. |
| 1.3.6.1.4.1.35902.1.6.6.1.3 | ColumnoperationPlayoutFileCircularDelay | read-write | current | Delay This field shows or sets the delay (in milliseconds) that has to be applied to the live stream the circular file node is recording. |
| 1.3.6.1.4.1.35902.1.6.6.1.4 | ColumnoperationPlayoutFileCircularTimezone | read-write | current | Time zone This field shows or sets the time zone which can optionally be used to align 24 hour-long timeshifts. It is particularly useful if daylight savings t… |
| 1.3.6.1.4.1.35902.1.6.6.1.5 | ColumnoperationPlayoutFileCircularDayOffset | read-write | current | Day offset This field shows or sets the offset after which the programs of the timeshifted channel begin every day. Daylight savings time changes will only be … |
| 1.3.6.1.4.1.35902.1.6.6.1.6 | ColumnoperationPlayoutFileCircularPrefetch | read-write | current | Prefetch This field shows or sets the duration (in milliseconds) that has to be prefetched when reading from the circular file node. |
| 1.3.6.1.4.1.35902.1.6.7 | TableoperationMonitorSIDTable | not-accessible | current | List of configured SID monitoring operations |
| 1.3.6.1.4.1.35902.1.6.7.1 | RowoperationMonitorSIDEntry | not-accessible | current | Properties for a single configured SID monitoring operation |
| 1.3.6.1.4.1.35902.1.6.7.1.1 | ColumnoperationMonitorSID | read-write | current | SID This field shows or sets the service ID, which the monitoring function has to monitor. |
| 1.3.6.1.4.1.35902.1.6.8 | TableoperationPlayoutDirectoryTable | not-accessible | current | List of configured directory playout operations |
| 1.3.6.1.4.1.35902.1.6.8.1 | RowoperationPlayoutDirectoryEntry | not-accessible | current | Properties for a single configured directory playout operation |
| 1.3.6.1.4.1.35902.1.6.8.1.1 | ColumnoperationPlayoutDirectoryInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the playout function. The input must be a directory node. The operati… |
| 1.3.6.1.4.1.35902.1.6.8.1.2 | ColumnoperationPlayoutDirectoryRank | read-write | current | Playout rank This field shows or sets the rank of the operation. Items are played by the playout function in the ascending rank order. |
| 1.3.6.1.4.1.35902.1.6.9 | TableoperationHintTable | not-accessible | current | List of configured hint operations |
| 1.3.6.1.4.1.35902.1.6.9.1 | RowoperationHintEntry | not-accessible | current | Properties for a single configured hint operation |
| 1.3.6.1.4.1.35902.1.6.9.1.1 | ColumnoperationHintRefIndex | read-write | current | Reference node This field references an entry in the node table, which is used as the reference for the hint operation. The reference must be a file node. The … |
| 1.3.6.1.4.1.35902.1.6.9.1.2 | ColumnoperationHintDirection | read-write | current | Direction This field shows or sets the direction of the hint, that is whether it is the beginning or end of an event. This field is only used if the function i… |
| 1.3.6.1.4.1.35902.1.6.9.1.3 | ColumnoperationHintMatch | read-write | current | Match percentage An event will be triggered if the given percentage of the reference file is found in the input. This field is only used if the function is a h… |
| 1.3.6.1.4.1.35902.1.6.9.1.4 | ColumnoperationHintBackwards | read-write | current | Backwards If this is enabled, upon the creation of the operation, past recordings of the circular file node will be reexamined. Otherwise, only the new recordi… |
| 1.3.6.1.4.1.35902.1.6.9.1.5 | ColumnoperationHintScheduleIndex | read-write | current | Hint schedule This field references an entry in the schedule table, which is triggered when the reference file is found in the input. |
| 1.3.6.1.4.1.35902.1.6.9.1.6 | ColumnoperationHintLastEventTime | read-only | current | Last event This field shows the date of the last event of the hint operation. |
| 1.3.6.1.4.1.35902.1.6.9.1.7 | ColumnoperationHintEndScheduleIndex | read-write | current | End schedule This field references an entry in the schedule table, which is triggered after the reference file is ended in the input. This is only supported wi… |
| 1.3.6.1.4.1.35902.1.6.10 | TableoperationTranscodeAVCTable | not-accessible | current | List of configured transcode AVC operations |
| 1.3.6.1.4.1.35902.1.6.10.1 | RowoperationTranscodeAVCEntry | not-accessible | current | Properties for a single configured transcode AVC operation |
| 1.3.6.1.4.1.35902.1.6.10.1.1 | ColumnoperationTranscodeAVCInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.10.1.2 | ColumnoperationTranscodeAVCPID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, a video PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.10.1.3 | ColumnoperationTranscodeAVCDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.10.1.4 | ColumnoperationTranscodeAVCBitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.10.1.5 | ColumnoperationTranscodeAVCVbvBuffer | read-write | current | CPB buffer size This field shows or sets the encoding CPB buffer size, in bits. When set to 0, a CPB buffer is automatically calculated from 4/5 of a GOP. |
| 1.3.6.1.4.1.35902.1.6.10.1.6 | ColumnoperationTranscodeAVCProfile | read-write | current | AVC profile This field shows or sets the encoding profile. |
| 1.3.6.1.4.1.35902.1.6.10.1.7 | ColumnoperationTranscodeAVCLevel | read-write | current | AVC level This field shows or sets the encoding level. When set to auto, the best level is chosen from the bitrate. |
| 1.3.6.1.4.1.35902.1.6.10.1.8 | ColumnoperationTranscodeAVCSpeed | read-write | current | Encoding speed This field shows or sets the encoding speed. Bear in mind that slower presets take more CPU, and you shouldn't saturate the server. |
| 1.3.6.1.4.1.35902.1.6.10.1.9 | ColumnoperationTranscodeAVCTuning | read-write | current | Encoder tuning This field shows or sets the encoder tuning. When different to none, psychovisual enhancements will be applied for the selected type of content. |
| 1.3.6.1.4.1.35902.1.6.10.1.10 | ColumnoperationTranscodeAVCFastDecode | read-write | current | Tune for fast decode When enabled, encoding algorithms will be tuned for faster decode on clients, at the expense of a lower quality. |
| 1.3.6.1.4.1.35902.1.6.10.1.11 | ColumnoperationTranscodeAVCGOP | read-write | current | GOP size This field shows or sets the GOP size, in frames. |
| 1.3.6.1.4.1.35902.1.6.10.1.12 | ColumnoperationTranscodeAVCMinGOP | read-write | current | Minimum GOP size This field shows or sets the minimum GOP size, in frames. It must be lower or equal to the GOP size. |
| 1.3.6.1.4.1.35902.1.6.10.1.13 | ColumnoperationTranscodeAVCCloseGOP | read-write | current | Close GOP When enabled, the GOPs will be closed. |
| 1.3.6.1.4.1.35902.1.6.10.1.14 | ColumnoperationTranscodeAVCBFrames | read-write | current | B frames This field shows or sets the number of B frames. |
| 1.3.6.1.4.1.35902.1.6.10.1.15 | ColumnoperationTranscodeAVCBPyramid | read-write | current | B pyramid This field shows or sets whether B frames may act as reference pictures. |
| 1.3.6.1.4.1.35902.1.6.10.1.16 | ColumnoperationTranscodeAVCCABAC | read-write | current | CABAC This field shows or sets whether CABAC or CAVLC will be used as entropy coder. |
| 1.3.6.1.4.1.35902.1.6.10.1.17 | ColumnoperationTranscodeAVCWidth | read-write | current | Width This field shows or sets the width of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.18 | ColumnoperationTranscodeAVCHeight | read-write | current | Height This field shows or sets the height of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.19 | ColumnoperationTranscodeAVCDeinterlace | read-write | current | Deinterlace This field activates or deactivates deinterlacing of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.20 | ColumnoperationTranscodeAVCAspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.21 | ColumnoperationTranscodeAVCFps | read-write | current | Frame rate This field shows or sets the frame rate the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.22 | ColumnoperationTranscodeAVCOverscan | read-write | current | Overscan This field shows or sets whether the overscan flag should be set on the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.23 | ColumnoperationTranscodeAVCMode | read-write | current | Bitrate mode This field shows or sets the bitrate mode of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.24 | ColumnoperationTranscodeAVCNoiseReduction | read-write | current | Noise reduction This field shows or sets the noise reduction applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.25 | ColumnoperationTranscodeAVCForceKeyframe | read-write | current | Force keyframe This field shows or sets the date of the next forced insertion of a keyframe, if defined. |
| 1.3.6.1.4.1.35902.1.6.10.1.26 | ColumnoperationTranscodeAVCChromaSubsampling | read-write | current | Chroma subsampling This field shows or sets the chroma subsampling applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.10.1.27 | ColumnoperationTranscodeAVCBAdapt | read-write | current | Adaptive B-frame This field shows or sets the adaptive B-frame decision method. |
| 1.3.6.1.4.1.35902.1.6.10.1.28 | ColumnoperationTranscodeAVCDecoderThreads | read-write | current | Decoder threads This field shows or sets the number of threads for the decoder (only used if the function is a remux function). Set to 0 for automatic detectio… |
| 1.3.6.1.4.1.35902.1.6.10.1.29 | ColumnoperationTranscodeAVCDecoderIndex | read-write | current | Decoder This field references an entry in the video accel table, which is used as the hardware decoder of the transcode avc operation (only used if the functio… |
| 1.3.6.1.4.1.35902.1.6.10.1.30 | ColumnoperationTranscodeAVCEncoderIndex | read-write | current | Encoder This field references an entry in the video accel table, which is used as the hardware encoder of the transcode avc operation. Set to 0 for software en… |
| 1.3.6.1.4.1.35902.1.6.10.1.31 | ColumnoperationTranscodeAVCEncoderThreads | read-write | current | Encoder threads This field shows or sets the number of threads for the encoder. Set to 0 for automatic detection. |
| 1.3.6.1.4.1.35902.1.6.10.1.32 | ColumnoperationTranscodeAVCLookaheadThreads | read-write | current | Lookahead threads This field shows or sets the number of threads for lookahead analysis. Encoder features such as B-frame count, full adaptive B-frame decision… |
| 1.3.6.1.4.1.35902.1.6.10.1.33 | ColumnoperationTranscodeAVCLookaheadDepth | read-write | current | Lookahead depth This field shows or sets the number of lookahead frames. Lookahead analysis can increase encoder quality at the expense of performance, delay a… |
| 1.3.6.1.4.1.35902.1.6.11 | TableoperationTranscodeMP2Table | not-accessible | current | List of configured transcode MP2 operations |
| 1.3.6.1.4.1.35902.1.6.11.1 | RowoperationTranscodeMP2Entry | not-accessible | current | Properties for a single configured transcode MP2 operation |
| 1.3.6.1.4.1.35902.1.6.11.1.1 | ColumnoperationTranscodeMP2InputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.11.1.2 | ColumnoperationTranscodeMP2PID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.11.1.3 | ColumnoperationTranscodeMP2Language | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.11.1.4 | ColumnoperationTranscodeMP2Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.11.1.5 | ColumnoperationTranscodeMP2Bitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.11.1.6 | ColumnoperationTranscodeMP2Rate | read-write | current | Sample rate This field shows or sets the sample rate of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.11.1.7 | ColumnoperationTranscodeMP2Channels | read-write | current | Channels This field shows or sets the number of channels of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.11.1.8 | ColumnoperationTranscodeMP2Crossblend | read-write | current | Crossblending This field shows or sets the amount of time, in milliseconds, the crossblending will last when changing inputs. |
| 1.3.6.1.4.1.35902.1.6.12 | TableoperationTranscodeAACTable | not-accessible | current | List of configured transcode AAC operations |
| 1.3.6.1.4.1.35902.1.6.12.1 | RowoperationTranscodeAACEntry | not-accessible | current | Properties for a single configured transcode AAC operation |
| 1.3.6.1.4.1.35902.1.6.12.1.1 | ColumnoperationTranscodeAACInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.12.1.2 | ColumnoperationTranscodeAACPID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.12.1.3 | ColumnoperationTranscodeAACLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.12.1.4 | ColumnoperationTranscodeAACDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.12.1.5 | ColumnoperationTranscodeAACBitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.12.1.6 | ColumnoperationTranscodeAACProfile | read-write | current | AAC profile This field shows or sets the encoding profile. |
| 1.3.6.1.4.1.35902.1.6.12.1.7 | ColumnoperationTranscodeAACRate | read-write | current | Sample rate This field shows or sets the sample rate of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.12.1.8 | ColumnoperationTranscodeAACChannels | read-write | current | Channels This field shows or sets the number of channels of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.12.1.9 | ColumnoperationTranscodeAACCrossblend | read-write | current | Crossblending This field shows or sets the amount of time, in milliseconds, the crossblending will last when changing inputs. |
| 1.3.6.1.4.1.35902.1.6.13 | TableoperationTransmitInputTable | not-accessible | deprecated | List of configured transmit input operations |
| 1.3.6.1.4.1.35902.1.6.13.1 | RowoperationTransmitInputEntry | not-accessible | deprecated | Properties for a single configured transmit input operation |
| 1.3.6.1.4.1.35902.1.6.13.1.1 | ColumnoperationTransmitInputIndex | read-write | deprecated | Input node This field references an entry in the node table, which is used as an input of the transmit input function. The input must be a net node. The operat… |
| 1.3.6.1.4.1.35902.1.6.14 | TableoperationTransmitOutputTable | not-accessible | deprecated | List of configured transmit output operations |
| 1.3.6.1.4.1.35902.1.6.14.1 | RowoperationTransmitOutputEntry | not-accessible | deprecated | Properties for a single configured transmit output operation |
| 1.3.6.1.4.1.35902.1.6.14.1.1 | ColumnoperationTransmitOutputIndex | read-write | deprecated | Output node This field references an entry in the node table, which is used as an output of the transmit output function, with the given weight. The output mus… |
| 1.3.6.1.4.1.35902.1.6.14.1.2 | ColumnoperationTransmitOutputWeight | read-write | deprecated | Weight This field shows or sets the weight of the output node in the transmit output function. Data are sent to the output nodes in amounts proportional to the… |
| 1.3.6.1.4.1.35902.1.6.15 | TableoperationTranscodeA52Table | not-accessible | current | List of configured transcode A52 operations |
| 1.3.6.1.4.1.35902.1.6.15.1 | RowoperationTranscodeA52Entry | not-accessible | current | Properties for a single configured transcode A52 operation |
| 1.3.6.1.4.1.35902.1.6.15.1.1 | ColumnoperationTranscodeA52InputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.15.1.2 | ColumnoperationTranscodeA52PID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.15.1.3 | ColumnoperationTranscodeA52Language | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.15.1.4 | ColumnoperationTranscodeA52Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.15.1.5 | ColumnoperationTranscodeA52Bitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.15.1.6 | ColumnoperationTranscodeA52Profile | read-write | current | A52 profile This field shows or sets the encoding profile. |
| 1.3.6.1.4.1.35902.1.6.15.1.7 | ColumnoperationTranscodeA52Rate | read-write | current | Sample rate This field shows or sets the sample rate of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.15.1.8 | ColumnoperationTranscodeA52Channels | read-write | current | Channels This field shows or sets the number of channels of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.15.1.9 | ColumnoperationTranscodeA52Crossblend | read-write | current | Crossblending This field shows or sets the amount of time, in milliseconds, the crossblending will last when changing inputs. |
| 1.3.6.1.4.1.35902.1.6.15.1.10 | ColumnoperationTranscodeA52ComponentType | read-write | current | Component Type This field shows or sets the component type set in the A52 descriptor (see A/52 table A5.2). |
| 1.3.6.1.4.1.35902.1.6.16 | TableoperationGridInputTable | not-accessible | current | List of configured grid input operations |
| 1.3.6.1.4.1.35902.1.6.16.1 | RowoperationGridInputEntry | not-accessible | current | Properties for a single configured grid input operation |
| 1.3.6.1.4.1.35902.1.6.16.1.1 | ColumnoperationGridInputOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the grid input operation. The output must be a video or audio node… |
| 1.3.6.1.4.1.35902.1.6.16.1.2 | ColumnoperationGridInputPID | read-write | current | PID This field shows or sets the PID to decode. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.16.1.3 | ColumnoperationGridInputLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to decode. |
| 1.3.6.1.4.1.35902.1.6.16.1.4 | ColumnoperationGridInputDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.16.1.5 | ColumnoperationGridInputThreads | read-write | current | Threads This field shows or sets the number of threads for the decoder. Set to 0 for automatic detection. |
| 1.3.6.1.4.1.35902.1.6.16.1.6 | ColumnoperationGridInputDecoderIndex | read-write | current | Decoder This field references an entry in the video accel table, which is used as the hardware decoder of the grid input operation. Set to 0 for software decod… |
| 1.3.6.1.4.1.35902.1.6.16.1.7 | ColumnoperationGridInputPosition | read-write | current | Position This field shows or sets the stream position in the program table to decode. Only streams of the same type as the output node are considered. Set to 0… |
| 1.3.6.1.4.1.35902.1.6.17 | TableoperationGridAcquireMonoTable | not-accessible | current | List of configured grid acquire mono operations |
| 1.3.6.1.4.1.35902.1.6.17.1 | RowoperationGridAcquireMonoEntry | not-accessible | current | Properties for a single configured grid acquire mono operation |
| 1.3.6.1.4.1.35902.1.6.17.1.1 | ColumnoperationGridAcquireMonoOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the operation. The output must be an audio node. The operation can… |
| 1.3.6.1.4.1.35902.1.6.17.1.2 | ColumnoperationGridAcquireMonoChannel | read-write | current | Channel number This field shows or sets the channel number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.17.1.3 | ColumnoperationGridAcquireMonoDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.18 | TableoperationGridAcquireStereoTable | not-accessible | current | List of configured grid acquire stereo operations |
| 1.3.6.1.4.1.35902.1.6.18.1 | RowoperationGridAcquireStereoEntry | not-accessible | current | Properties for a single configured grid acquire stereo operation |
| 1.3.6.1.4.1.35902.1.6.18.1.1 | ColumnoperationGridAcquireStereoOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the operation. The output must be an audio node. The operation can… |
| 1.3.6.1.4.1.35902.1.6.18.1.2 | ColumnoperationGridAcquireStereoPair | read-write | current | Pair number This field shows or sets the channel pair number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.18.1.3 | ColumnoperationGridAcquireStereoDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.19 | TableoperationAcquireMonoTable | not-accessible | current | List of configured acquire mono operations |
| 1.3.6.1.4.1.35902.1.6.19.1 | RowoperationAcquireMonoEntry | not-accessible | current | Properties for a single configured acquire mono operation |
| 1.3.6.1.4.1.35902.1.6.19.1.1 | ColumnoperationAcquireMonoChannel | read-write | current | Channel number This field shows or sets the channel number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.19.1.2 | ColumnoperationAcquireMonoPID | read-write | current | PID This field shows or sets the PID to acquire. |
| 1.3.6.1.4.1.35902.1.6.19.1.3 | ColumnoperationAcquireMonoLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to acquire. |
| 1.3.6.1.4.1.35902.1.6.20 | TableoperationAcquireStereoTable | not-accessible | current | List of configured acquire stereo operations |
| 1.3.6.1.4.1.35902.1.6.20.1 | RowoperationAcquireStereoEntry | not-accessible | current | Properties for a single configured acquire stereo operation |
| 1.3.6.1.4.1.35902.1.6.20.1.1 | ColumnoperationAcquireStereoPair | read-write | current | Pair number This field shows or sets the channel pair number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.20.1.2 | ColumnoperationAcquireStereoPID | read-write | current | PID This field shows or sets the PID to acquire. |
| 1.3.6.1.4.1.35902.1.6.20.1.3 | ColumnoperationAcquireStereoLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to acquire. |
| 1.3.6.1.4.1.35902.1.6.21 | TableoperationMuxInputTable | not-accessible | current | List of configured mux input operations |
| 1.3.6.1.4.1.35902.1.6.21.1 | RowoperationMuxInputEntry | not-accessible | current | Properties for a single configured mux input operation |
| 1.3.6.1.4.1.35902.1.6.21.1.1 | ColumnoperationMuxInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the mux input operation. The input must be a net, pointer or local n… |
| 1.3.6.1.4.1.35902.1.6.21.1.2 | ColumnoperationMuxInputEITInterval | read-write | current | EIT interval This field shows or sets the interval between repetitions of the EIT, in units of a 27 MHz clock. To disable sending the EIT, set to 0. This field… |
| 1.3.6.1.4.1.35902.1.6.21.1.3 | ColumnoperationMuxInputHide | read-write | current | Hide services This field shows or sets if the input services should be hidden. |
| 1.3.6.1.4.1.35902.1.6.22 | TableoperationRemapPIDTable | not-accessible | current | List of configured PID remapping operations |
| 1.3.6.1.4.1.35902.1.6.22.1 | RowoperationRemapPIDEntry | not-accessible | current | Properties for a single configured PID remapping operation |
| 1.3.6.1.4.1.35902.1.6.22.1.1 | ColumnoperationRemapPIDToPID | read-write | current | New PID This shows or sets the new PID that is applied to the relevant elementary stream, if not 0. |
| 1.3.6.1.4.1.35902.1.6.22.1.2 | ColumnoperationRemapPIDToLanguage | read-write | current | New language This shows or sets the ISO-639 three-letter audio language that is used to detect the relevant elementary stream, if not empty. |
| 1.3.6.1.4.1.35902.1.6.22.1.3 | ColumnoperationRemapPIDFromPID | read-write | current | Old PID This shows or sets the old PID that is used to detect the relevant elementary stream, if not 0. |
| 1.3.6.1.4.1.35902.1.6.22.1.4 | ColumnoperationRemapPIDFromLanguage | read-write | current | Old language This shows or sets the ISO-639 three-letter audio language that is used to detect the relevant elementary stream, if not empty. |
| 1.3.6.1.4.1.35902.1.6.22.1.5 | ColumnoperationRemapPIDFromType | read-write | current | ES type This shows or sets the elementary stream type that is used to detect the relevant elementary stream, if applicable. |
| 1.3.6.1.4.1.35902.1.6.22.1.6 | ColumnoperationRemapPIDDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.22.1.7 | ColumnoperationRemapPIDBitrate | read-write | current | Bitrate This field shows or sets the stream bitrate to overwrite in bits/s if not 0. |
| 1.3.6.1.4.1.35902.1.6.22.1.8 | ColumnoperationRemapPIDBufferSize | read-write | current | Buffer size This field shows or sets the stream buffer size to overwrite in bits if not 0. |
| 1.3.6.1.4.1.35902.1.6.22.1.9 | ColumnoperationRemapPIDPosition | read-write | current | Position This field shows or sets the stream position in the input program table to remap. Only streams of the selected ES type are considered. Set to 0 to sel… |
| 1.3.6.1.4.1.35902.1.6.23 | TableoperationRemapSIDTable | not-accessible | current | List of configured SID remapping operations |
| 1.3.6.1.4.1.35902.1.6.23.1 | RowoperationRemapSIDEntry | not-accessible | current | Properties for a single configured SID remapping operation |
| 1.3.6.1.4.1.35902.1.6.23.1.1 | ColumnoperationRemapSIDToSID | read-write | current | New SID This shows or sets the new SID that is applied to the relevant service, if not 0. |
| 1.3.6.1.4.1.35902.1.6.23.1.2 | ColumnoperationRemapSIDToPMTPID | read-write | current | New PMT PID This shows or sets the new PMT PID that is applied to the relevant service, if not 0. |
| 1.3.6.1.4.1.35902.1.6.23.1.3 | ColumnoperationRemapSIDFromSID | read-write | current | Old SID This shows or sets the old SID that is used to detect the relevant elementary stream, if not 0. |
| 1.3.6.1.4.1.35902.1.6.23.1.4 | ColumnoperationRemapSIDToName | read-write | current | New service name This field specifies the service name written in the SDT of the outgoing stream. If it is left empty, the service name will be the same as in … |
| 1.3.6.1.4.1.35902.1.6.23.1.5 | ColumnoperationRemapSIDToProvider | read-write | current | New service provider This field specifies the service provider written in the SDT of the outgoing stream. If it is left empty, the service provider will be the… |
| 1.3.6.1.4.1.35902.1.6.23.1.6 | ColumnoperationRemapSIDToType | read-write | current | New service type This field specifies the service type written in the SDT of the outgoing stream. |
| 1.3.6.1.4.1.35902.1.6.24 | TableoperationMosaicTable | not-accessible | current | List of configured mosaic operations |
| 1.3.6.1.4.1.35902.1.6.24.1 | RowoperationMosaicEntry | not-accessible | current | Properties for a single configured mosaic operation |
| 1.3.6.1.4.1.35902.1.6.24.1.1 | ColumnoperationMosaicPosition | read-write | current | Position This field shows or sets the position in the mosaic from the top-left corner, left to right then top to bottom, starting from 1. For automatic placeme… |
| 1.3.6.1.4.1.35902.1.6.24.1.2 | ColumnoperationMosaicVideoIndex | read-write | current | Main node This field references an entry in the node table, which is used as the main input of the mosaic operation. The node can be a video, audio or pointer … |
| 1.3.6.1.4.1.35902.1.6.24.1.3 | ColumnoperationMosaicAudioLeftIndex | read-write | current | Left audio node This field references an entry in the node table, which is used as the left audio input of the mosaic operation. The node must be an audio or p… |
| 1.3.6.1.4.1.35902.1.6.24.1.4 | ColumnoperationMosaicAudioRightIndex | read-write | current | Right audio node This field references an entry in the node table, which is used as the right audio input of the mosaic operation. The node must be an audio or… |
| 1.3.6.1.4.1.35902.1.6.24.1.5 | ColumnoperationMosaicRowSpan | read-write | current | Row span This field shows or sets the number of rows this cell should span vertically. |
| 1.3.6.1.4.1.35902.1.6.24.1.6 | ColumnoperationMosaicColSpan | read-write | current | Column span This field shows or sets the number of columns this cell should span horizontally. |
| 1.3.6.1.4.1.35902.1.6.24.1.7 | ColumnoperationMosaicLabel | read-write | current | Label This field shows or sets the label for the mosaic operation. |
| 1.3.6.1.4.1.35902.1.6.24.1.8 | ColumnoperationMosaicLabelForegroundColor | read-write | current | Label foreground color This field shows or sets the label foreground color. Leave empty to use default value from the mosaic function. |
| 1.3.6.1.4.1.35902.1.6.24.1.9 | ColumnoperationMosaicLabelBackgroundColor | read-write | current | Label background color This field shows or sets the label background color. Leave empty to use default value from the mosaic function. |
| 1.3.6.1.4.1.35902.1.6.24.1.10 | ColumnoperationMosaicAudioSecondLeftIndex | read-write | current | Second left audio node This field references an entry in the node table, which is used as the second left audio input of the mosaic operation. The node must be… |
| 1.3.6.1.4.1.35902.1.6.24.1.11 | ColumnoperationMosaicAudioSecondRightIndex | read-write | current | Second right audio node This field references an entry in the node table, which is used as the second right audio input of the mosaic operation. The node must … |
| 1.3.6.1.4.1.35902.1.6.24.1.12 | ColumnoperationMosaicSubtitleIndex | read-write | current | Subtitle node This field references an entry in the node table, which is used as the subtitle input of the mosaic operation. The node must be a subtitle or poi… |
| 1.3.6.1.4.1.35902.1.6.24.1.13 | ColumnoperationMosaicToneMappingMethod | read-write | current | Tone mapping method This field shows or sets the tone mapping algorithm to use for HDR10 to SDR dynamic range conversion. reinhard: preserve overall image brig… |
| 1.3.6.1.4.1.35902.1.6.24.1.14 | ColumnoperationMosaicToneMappingParam | read-write | current | Tone mapping parameter This field shows or sets the optional parameter used for tuning the tone mapping algorithm, as a decimal value. reinhard: specify the lo… |
| 1.3.6.1.4.1.35902.1.6.24.1.15 | ColumnoperationMosaicToneMappingDesaturation | read-write | current | Tone mapping desaturation This field shows or sets the desaturation applied for highlights that exceed this level of brightness. The higher the parameter, the … |
| 1.3.6.1.4.1.35902.1.6.25 | TableoperationHintScte35Table | not-accessible | current | List of configured hint scte35 operations |
| 1.3.6.1.4.1.35902.1.6.25.1 | RowoperationHintScte35Entry | not-accessible | current | Properties for a single configured hint scte35 operation |
| 1.3.6.1.4.1.35902.1.6.25.1.1 | ColumnoperationHintScte35PID | read-write | current | PID This field shows or sets the PID to monitor. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.25.1.2 | ColumnoperationHintScte35Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.25.1.3 | ColumnoperationHintScte35StartScheduleIndex | read-write | current | Start schedule This field references an entry in the schedule table, which is triggered when an SCTE-35 start (or out-of-network for splice insert) event occur… |
| 1.3.6.1.4.1.35902.1.6.25.1.4 | ColumnoperationHintScte35EndScheduleIndex | read-write | current | End schedule This field references an entry in the schedule table, which is triggered when an SCTE-35 end (or return-to-network for splice insert) event occurs… |
| 1.3.6.1.4.1.35902.1.6.25.1.5 | ColumnoperationHintScte35LastEventID | read-only | current | Last event ID This field shows the last event ID of the hint scte35 operation. |
| 1.3.6.1.4.1.35902.1.6.25.1.6 | ColumnoperationHintScte35LastProgramID | read-only | current | Last program ID This field shows the last program ID of the hint scte35 operation. |
| 1.3.6.1.4.1.35902.1.6.25.1.7 | ColumnoperationHintScte35LastDuration | read-only | current | Last duration This field shows the duration, in 27 MHz units, of the last event of the hint scte35 operation. |
| 1.3.6.1.4.1.35902.1.6.25.1.8 | ColumnoperationHintScte35LastStart | read-only | current | Last start status This field shows whether the last event of the hint scte35 operation was start. |
| 1.3.6.1.4.1.35902.1.6.25.1.9 | ColumnoperationHintScte35Event | read-write | current | Event This field shows or sets the SCTE-35 event to look for. |
| 1.3.6.1.4.1.35902.1.6.25.1.10 | ColumnoperationHintScte35LastEvent | read-only | current | Last event This field shows the last SCTE-35 event. |
| 1.3.6.1.4.1.35902.1.6.25.1.11 | ColumnoperationHintScte35LastExtended | read-only | current | Last extended This field shows a JSON string describing the last SCTE-35 event. |
| 1.3.6.1.4.1.35902.1.6.26 | TableoperationTranscodeMpeg2Table | not-accessible | current | List of configured transcode mpeg2 operations |
| 1.3.6.1.4.1.35902.1.6.26.1 | RowoperationTranscodeMpeg2Entry | not-accessible | current | Properties for a single configured transcode mpeg2 operation |
| 1.3.6.1.4.1.35902.1.6.26.1.1 | ColumnoperationTranscodeMpeg2InputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.26.1.2 | ColumnoperationTranscodeMpeg2PID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, a video PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.26.1.3 | ColumnoperationTranscodeMpeg2Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.26.1.4 | ColumnoperationTranscodeMpeg2Bitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.26.1.5 | ColumnoperationTranscodeMpeg2VbvBuffer | read-write | current | VBV buffer size This field shows or sets the VBV buffer size, in bits. When set to 0, a VBV buffer is automatically calculated from 4/5 of a GOP, or the maximu… |
| 1.3.6.1.4.1.35902.1.6.26.1.6 | ColumnoperationTranscodeMpeg2Profile | read-write | current | MPEG-2 profile This field shows or sets the encoding profile. |
| 1.3.6.1.4.1.35902.1.6.26.1.7 | ColumnoperationTranscodeMpeg2Level | read-write | current | MPEG-2 level This field shows or sets the encoding level. When set to auto, the best level is chosen from the bitrate. |
| 1.3.6.1.4.1.35902.1.6.26.1.8 | ColumnoperationTranscodeMpeg2Speed | read-write | current | Encoding speed This field shows or sets the encoding speed. Bear in mind that slower presets take more CPU, and you shouldn't saturate the server. |
| 1.3.6.1.4.1.35902.1.6.26.1.9 | ColumnoperationTranscodeMpeg2Tuning | read-write | current | Encoder tuning This field shows or sets the encoder tuning. When different to none, psychovisual enhancements will be applied for the selected type of content. |
| 1.3.6.1.4.1.35902.1.6.26.1.10 | ColumnoperationTranscodeMpeg2FastDecode | read-write | current | Tune for fast decode When enabled, encoding algorithms will be tuned for faster decode on clients, at the expense of a lower quality. |
| 1.3.6.1.4.1.35902.1.6.26.1.11 | ColumnoperationTranscodeMpeg2GOP | read-write | current | GOP size This field shows or sets the GOP size, in frames. |
| 1.3.6.1.4.1.35902.1.6.26.1.12 | ColumnoperationTranscodeMpeg2MinGOP | read-write | current | Minimum GOP size This field shows or sets the minimum GOP size, in frames. It must be lower or equal to the GOP size. |
| 1.3.6.1.4.1.35902.1.6.26.1.13 | ColumnoperationTranscodeMpeg2CloseGOP | read-write | current | Close GOP When enabled, the GOPs will be closed. |
| 1.3.6.1.4.1.35902.1.6.26.1.14 | ColumnoperationTranscodeMpeg2BFrames | read-write | current | B frames This field shows or sets the number of B frames. |
| 1.3.6.1.4.1.35902.1.6.26.1.15 | ColumnoperationTranscodeMpeg2Width | read-write | current | Width This field shows or sets the width of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.16 | ColumnoperationTranscodeMpeg2Height | read-write | current | Height This field shows or sets the height of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.17 | ColumnoperationTranscodeMpeg2Deinterlace | read-write | current | Deinterlace This field activates or deactivates deinterlacing of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.18 | ColumnoperationTranscodeMpeg2Aspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.19 | ColumnoperationTranscodeMpeg2Fps | read-write | current | Frame rate This field shows or sets the frame rate the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.20 | ColumnoperationTranscodeMpeg2Mode | read-write | current | Bitrate mode This field shows or sets the bitrate mode of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.21 | ColumnoperationTranscodeMpeg2NoiseReduction | read-write | current | Noise reduction This field shows or sets the noise reduction applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.22 | ColumnoperationTranscodeMpeg2ChromaSubsampling | read-write | current | Chroma subsampling This field shows or sets the chroma subsampling applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.26.1.23 | ColumnoperationTranscodeMpeg2BAdapt | read-write | current | Adaptive B-frame This field shows or sets the adaptive B-frame decision method. |
| 1.3.6.1.4.1.35902.1.6.26.1.24 | ColumnoperationTranscodeMpeg2DecoderThreads | read-write | current | Decoder threads This field shows or sets the number of threads for the decoder (only used if the function is a remux function). Set to 0 for automatic detectio… |
| 1.3.6.1.4.1.35902.1.6.26.1.25 | ColumnoperationTranscodeMpeg2DecoderIndex | read-write | current | Decoder This field references an entry in the video accel table, which is used as the hardware decoder of the transcode mpeg2 operation (only used if the funct… |
| 1.3.6.1.4.1.35902.1.6.26.1.26 | ColumnoperationTranscodeMpeg2EncoderIndex | read-write | current | Encoder This field references an entry in the video accel table, which is used as the hardware encoder of the transcode mpeg2 operation. Set to 0 for software … |
| 1.3.6.1.4.1.35902.1.6.27 | TableoperationExtractTable | not-accessible | current | List of configured extract operations |
| 1.3.6.1.4.1.35902.1.6.27.1 | RowoperationExtractEntry | not-accessible | current | Properties for a single configured extract operation |
| 1.3.6.1.4.1.35902.1.6.27.1.1 | ColumnoperationExtractTime | read-write | current | Time offset This field shows or sets the 27 MHz timestamp that marks the beginning of the extracts. When positive, it is the number of 27 MHz ticks from the be… |
| 1.3.6.1.4.1.35902.1.6.27.1.2 | ColumnoperationExtractDuration | read-write | current | Time duration This field shows or sets the duration of the extracts, in units of a 27 MHz clock. When negative, it is used as an offset from the end of the fil… |
| 1.3.6.1.4.1.35902.1.6.27.1.3 | ColumnoperationExtractOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output to the extract operation. The output must be a file, directory or extr… |
| 1.3.6.1.4.1.35902.1.6.27.1.4 | ColumnoperationExtractOutputSuffix | read-write | current | Output suffix This field shows or sets the suffix (after the dot) that will be applied to output files, if not empty. It is also instrumental in configuring th… |
| 1.3.6.1.4.1.35902.1.6.28 | TableoperationEncodeScte35Table | not-accessible | current | List of configured encode scte35 operations |
| 1.3.6.1.4.1.35902.1.6.28.1 | RowoperationEncodeScte35Entry | not-accessible | current | Properties for a single configured encode scte35 operation |
| 1.3.6.1.4.1.35902.1.6.28.1.1 | ColumnoperationEncodeScte35ServiceID | read-write | current | Service ID This field shows or sets the service ID to which an SCTE-35 stream is added. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.28.1.2 | ColumnoperationEncodeScte35PID | read-write | current | PID This field shows or sets the PID on which an SCTE-35 is added. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.28.1.3 | ColumnoperationEncodeScte35Interval | read-write | current | Interval This field shows or sets the interval between repetitions of the SCTE-35 tables, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.6.28.1.4 | ColumnoperationEncodeScte35EventID | read-write | current | Event ID This field shows or sets the event ID of the encode scte35 operation. |
| 1.3.6.1.4.1.35902.1.6.28.1.5 | ColumnoperationEncodeScte35ProgramID | read-write | current | Program ID This field shows or sets the program ID of the encode scte35 operation. |
| 1.3.6.1.4.1.35902.1.6.28.1.6 | ColumnoperationEncodeScte35Date | read-write | current | Event date This field shows or sets the date of the event of the encode scte35 operation, if defined. |
| 1.3.6.1.4.1.35902.1.6.28.1.7 | ColumnoperationEncodeScte35Duration | read-write | current | Event duration This field shows or sets the duration, in 27 MHz units, of the event of the encode scte35 operation, if not 0. |
| 1.3.6.1.4.1.35902.1.6.28.1.8 | ColumnoperationEncodeScte35OutOfNetwork | read-write | current | Out of network This field shows or sets whether the event of the encode scte35 operation is out of network. |
| 1.3.6.1.4.1.35902.1.6.28.1.9 | ColumnoperationEncodeScte35AutoReturn | read-write | current | Auto return This field shows or sets whether the event of the encode scte35 operation automatically returns after the duration. |
| 1.3.6.1.4.1.35902.1.6.28.1.10 | ColumnoperationEncodeScte35Extended | read-write | current | Extended This field shows or sets a JSON string describing the SCTE-35 event to send. |
| 1.3.6.1.4.1.35902.1.6.29 | TableoperationMonitorDelayTable | not-accessible | current | List of configured monitor delay operations |
| 1.3.6.1.4.1.35902.1.6.29.1 | RowoperationMonitorDelayEntry | not-accessible | current | Properties for a single configured monitor delay operation |
| 1.3.6.1.4.1.35902.1.6.29.1.1 | ColumnoperationMonitorDelayInputIndex | read-write | current | Input node This field references an entry in the node table, which is used for comparison to the reference node. The node must be a video node with fingerprint… |
| 1.3.6.1.4.1.35902.1.6.29.1.2 | ColumnoperationMonitorDelayCurrent | read-only | current | Current delay This field shows the current delay between the reference node and the input node, if the operation is up. |
| 1.3.6.1.4.1.35902.1.6.30 | TableoperationTranscodeMP3Table | not-accessible | current | List of configured transcode MP3 operations |
| 1.3.6.1.4.1.35902.1.6.30.1 | RowoperationTranscodeMP3Entry | not-accessible | current | Properties for a single configured transcode MP3 operation |
| 1.3.6.1.4.1.35902.1.6.30.1.1 | ColumnoperationTranscodeMP3InputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.30.1.2 | ColumnoperationTranscodeMP3PID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.30.1.3 | ColumnoperationTranscodeMP3Language | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.30.1.4 | ColumnoperationTranscodeMP3Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.30.1.5 | ColumnoperationTranscodeMP3Bitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.30.1.6 | ColumnoperationTranscodeMP3Rate | read-write | current | Sample rate This field shows or sets the sample rate of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.30.1.7 | ColumnoperationTranscodeMP3Channels | read-write | current | Channels This field shows or sets the number of channels of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.30.1.8 | ColumnoperationTranscodeMP3Crossblend | read-write | current | Crossblending This field shows or sets the amount of time, in milliseconds, the crossblending will last when changing inputs. |
| 1.3.6.1.4.1.35902.1.6.31 | TableoperationMonitorStructureTable | not-accessible | current | List of configured monitor structure operations |
| 1.3.6.1.4.1.35902.1.6.31.1 | RowoperationMonitorStructureEntry | not-accessible | current | Properties for a single configured monitor structure operation |
| 1.3.6.1.4.1.35902.1.6.31.1.1 | ColumnoperationMonitorStructureFind | read-write | current | XPath expression This field, a string compliant to W3C XPath specification, shows or sets the search string which is supposed to return XML elements. Example: … |
| 1.3.6.1.4.1.35902.1.6.31.1.2 | ColumnoperationMonitorStructureMin | read-write | current | Min number of elements This field shows or sets the minimum number of XML elements that are supposed to be returned by the XPath expression. |
| 1.3.6.1.4.1.35902.1.6.31.1.3 | ColumnoperationMonitorStructureMax | read-write | current | Max number of elements This field shows or sets the maximum number of XML elements that are supposed to be returned by the XPath expression. |
| 1.3.6.1.4.1.35902.1.6.32 | TableoperationAcquireA52Table | not-accessible | current | List of configured acquire a52 operations |
| 1.3.6.1.4.1.35902.1.6.32.1 | RowoperationAcquireA52Entry | not-accessible | current | Properties for a single configured acquire a52 operation |
| 1.3.6.1.4.1.35902.1.6.32.1.1 | ColumnoperationAcquireA52Pair | read-write | current | Pair number This field shows or sets the channel pair number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.32.1.2 | ColumnoperationAcquireA52PID | read-write | current | PID This field shows or sets the PID to acquire. |
| 1.3.6.1.4.1.35902.1.6.32.1.3 | ColumnoperationAcquireA52Language | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to acquire. |
| 1.3.6.1.4.1.35902.1.6.32.1.4 | ColumnoperationAcquireA52Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.33 | TableoperationGridAcquireA52Table | not-accessible | current | List of configured grid acquire a52 operations |
| 1.3.6.1.4.1.35902.1.6.33.1 | RowoperationGridAcquireA52Entry | not-accessible | current | Properties for a single configured grid acquire a52 operation |
| 1.3.6.1.4.1.35902.1.6.33.1.1 | ColumnoperationGridAcquireA52OutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the operation. The output must be an audio or es node. The operati… |
| 1.3.6.1.4.1.35902.1.6.33.1.2 | ColumnoperationGridAcquireA52Pair | read-write | current | Pair number This field shows or sets the channel pair number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.33.1.3 | ColumnoperationGridAcquireA52Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.34 | TableoperationAcquireOP47Table | not-accessible | current | List of configured acquire op47 operations |
| 1.3.6.1.4.1.35902.1.6.34.1 | RowoperationAcquireOP47Entry | not-accessible | current | Properties for a single configured acquire op47 operation |
| 1.3.6.1.4.1.35902.1.6.34.1.1 | ColumnoperationAcquireOP47PID | read-write | current | PID This field shows or sets the PID to use to embed OP47 data. |
| 1.3.6.1.4.1.35902.1.6.34.1.2 | ColumnoperationAcquireOP47Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.34.1.3 | ColumnoperationAcquireOP47Language1 | read-write | current | Language 1 This field shows or sets the ISO-639 three-letter audio language of the first page to declare. Leave blank for no page declaration. |
| 1.3.6.1.4.1.35902.1.6.34.1.4 | ColumnoperationAcquireOP47Magazine1 | read-write | current | Magazine 1 This field shows or sets the Teletext magazine of the first page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.5 | ColumnoperationAcquireOP47Page1 | read-write | current | Page 1 This field shows or sets the Teletext page number of the first page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.6 | ColumnoperationAcquireOP47Type1 | read-write | current | Type 1 This field shows or sets the Teletext type of the first page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.7 | ColumnoperationAcquireOP47Language2 | read-write | current | Language 2 This field shows or sets the ISO-639 three-letter audio language of the second page to declare. Leave blank for no page declaration. |
| 1.3.6.1.4.1.35902.1.6.34.1.8 | ColumnoperationAcquireOP47Magazine2 | read-write | current | Magazine 2 This field shows or sets the Teletext magazine of the second page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.9 | ColumnoperationAcquireOP47Page2 | read-write | current | Page 2 This field shows or sets the Teletext page number of the second page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.10 | ColumnoperationAcquireOP47Type2 | read-write | current | Type 2 This field shows or sets the Teletext type of the second page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.11 | ColumnoperationAcquireOP47Language3 | read-write | current | Language 3 This field shows or sets the ISO-639 three-letter audio language of the third page to declare. Leave blank for no page declaration. |
| 1.3.6.1.4.1.35902.1.6.34.1.12 | ColumnoperationAcquireOP47Magazine3 | read-write | current | Magazine 3 This field shows or sets the Teletext magazine of the third page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.13 | ColumnoperationAcquireOP47Page3 | read-write | current | Page 3 This field shows or sets the Teletext page number of the third page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.14 | ColumnoperationAcquireOP47Type3 | read-write | current | Type 3 This field shows or sets the Teletext type of the third page to declare. |
| 1.3.6.1.4.1.35902.1.6.34.1.15 | ColumnoperationAcquireOP47OutputIndex | read-write | current | Output This field shows or sets the index of the node that is used as output. |
| 1.3.6.1.4.1.35902.1.6.35 | TableoperationAcquireScte104Table | not-accessible | current | List of configured acquire scte104 operations |
| 1.3.6.1.4.1.35902.1.6.35.1 | RowoperationAcquireScte104Entry | not-accessible | current | Properties for a single configured acquire scte104 operation |
| 1.3.6.1.4.1.35902.1.6.35.1.1 | ColumnoperationAcquireScte104PID | read-write | current | PID This field shows or sets the PID to use to embed Scte104 data. |
| 1.3.6.1.4.1.35902.1.6.35.1.2 | ColumnoperationAcquireScte104DPIPIDIndex | read-write | current | DPI PID index This field shows or sets the DPI PID index associated with the injector. |
| 1.3.6.1.4.1.35902.1.6.35.1.3 | ColumnoperationAcquireScte104Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.35.1.4 | ColumnoperationAcquireScte104Scte35Interval | read-write | current | SCTE-35 interval This field shows or sets the interval between repetitions of the SCTE-35 table, in units of a 27 MHz clock. To disable sending the SCTE-35 tab… |
| 1.3.6.1.4.1.35902.1.6.35.1.5 | ColumnoperationAcquireScte104OutputIndex | read-write | current | Output This field references an entry in the node table, which is used as an output of the operation (only used if the function is a grid acquire function). Th… |
| 1.3.6.1.4.1.35902.1.6.36 | TableoperationHintScte104Table | not-accessible | current | List of configured hint scte104 operations |
| 1.3.6.1.4.1.35902.1.6.36.1 | RowoperationHintScte104Entry | not-accessible | current | Properties for a single configured hint scte104 operation |
| 1.3.6.1.4.1.35902.1.6.36.1.1 | ColumnoperationHintScte104DPIPIDIndex | read-write | current | DPI PID index This field shows or sets the DPI PID index of the injector to monitor. |
| 1.3.6.1.4.1.35902.1.6.36.1.2 | ColumnoperationHintScte104Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.36.1.3 | ColumnoperationHintScte104StartScheduleIndex | read-write | current | Start schedule This field references an entry in the schedule table, which is triggered when an SCTE-35 start (or out-of-network for splice insert) event occur… |
| 1.3.6.1.4.1.35902.1.6.36.1.4 | ColumnoperationHintScte104EndScheduleIndex | read-write | current | End schedule This field references an entry in the schedule table, which is triggered when an SCTE-104 end (or return-to-network for splice insert) event occur… |
| 1.3.6.1.4.1.35902.1.6.36.1.5 | ColumnoperationHintScte104LastEventID | read-only | current | Last event ID This field shows the last event ID of the hint scte104 operation. |
| 1.3.6.1.4.1.35902.1.6.36.1.6 | ColumnoperationHintScte104LastProgramID | read-only | current | Last program ID This field shows the last program ID of the hint scte104 operation. |
| 1.3.6.1.4.1.35902.1.6.36.1.7 | ColumnoperationHintScte104LastDuration | read-only | current | Last duration This field shows the duration, in 27 MHz units, of the last event of the hint scte104 operation. |
| 1.3.6.1.4.1.35902.1.6.36.1.8 | ColumnoperationHintScte104LastStart | read-only | current | Last start status This field shows whether the last event of the hint scte104 operation was start. |
| 1.3.6.1.4.1.35902.1.6.36.1.9 | ColumnoperationHintScte104Event | read-write | current | Event This field shows or sets the SCTE-104 event to look for. |
| 1.3.6.1.4.1.35902.1.6.36.1.10 | ColumnoperationHintScte104LastEvent | read-only | current | Last event This field shows the last SCTE-104 event. |
| 1.3.6.1.4.1.35902.1.6.36.1.11 | ColumnoperationHintScte104LastExtended | read-only | current | Last extended This field shows a JSON string describing the last SCTE-104 event. |
| 1.3.6.1.4.1.35902.1.6.37 | TableoperationOverlayTable | not-accessible | current | List of configured overlay operations |
| 1.3.6.1.4.1.35902.1.6.37.1 | RowoperationOverlayEntry | not-accessible | current | Properties for a single configured overlay operation |
| 1.3.6.1.4.1.35902.1.6.37.1.1 | ColumnoperationOverlayInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the overlay operation. The node must be a video, subtitle or pointer… |
| 1.3.6.1.4.1.35902.1.6.37.1.2 | ColumnoperationOverlayZIndex | read-write | current | Z-index This field shows or sets the z-index of the operation in the output frame. When there are several overlay operations, operations with a higher z-index … |
| 1.3.6.1.4.1.35902.1.6.37.1.3 | ColumnoperationOverlayAlpha | read-write | current | Alpha multiplier This field shows or sets the alpha multiplier of the operation in the output frame. The alpha channel of the input is multiplied by this coeff… |
| 1.3.6.1.4.1.35902.1.6.37.1.4 | ColumnoperationOverlayOutputLeftOffset | read-write | current | Output left offset This field shows or sets the left offset in the output frame, after which the overlay placement starts. |
| 1.3.6.1.4.1.35902.1.6.37.1.5 | ColumnoperationOverlayOutputRightOffset | read-write | current | Output right offset This field shows or sets the right offset in the output frame, before which the overlay placement ends. |
| 1.3.6.1.4.1.35902.1.6.37.1.6 | ColumnoperationOverlayOutputTopOffset | read-write | current | Output top offset This field shows or sets the top offset in the output frame, after which the overlay placement starts. |
| 1.3.6.1.4.1.35902.1.6.37.1.7 | ColumnoperationOverlayOutputBottomOffset | read-write | current | Output bottom offset This field shows or sets the bottom offset in the output frame, before which the overlay placement ends. |
| 1.3.6.1.4.1.35902.1.6.37.1.8 | ColumnoperationOverlayInputLeftOffset | read-write | current | Input left offset This field shows or sets the left offset in the input frame, from which the overlay placement starts. Negative values allow to extend the inp… |
| 1.3.6.1.4.1.35902.1.6.37.1.9 | ColumnoperationOverlayInputRightOffset | read-write | current | Input right offset This field shows or sets the right offset in the input frame, from which the overlay placement ends. Negative values allow to extend the inp… |
| 1.3.6.1.4.1.35902.1.6.37.1.10 | ColumnoperationOverlayInputTopOffset | read-write | current | Input top offset This field shows or sets the top offset in the input frame, from which the overlay placement starts. Negative values allow to extend the input… |
| 1.3.6.1.4.1.35902.1.6.37.1.11 | ColumnoperationOverlayInputBottomOffset | read-write | current | Input bottom offset This field shows or sets the bottom offset in the input frame, from which the overlay placement ends. Negative values allow to extend the i… |
| 1.3.6.1.4.1.35902.1.6.38 | TableoperationSwitchTable | not-accessible | current | List of configured switch operations |
| 1.3.6.1.4.1.35902.1.6.38.1 | RowoperationSwitchEntry | not-accessible | current | Properties for a single configured switch operation |
| 1.3.6.1.4.1.35902.1.6.38.1.1 | ColumnoperationSwitchInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the switch operation. The node must be a net, video, audio, es, subt… |
| 1.3.6.1.4.1.35902.1.6.38.1.2 | ColumnoperationSwitchRank | read-write | current | Rank This field shows or sets the rank of the operation. Items are chosen by the switch function in the ascending rank order. |
| 1.3.6.1.4.1.35902.1.6.39 | TableoperationTranscodeHEVCTable | not-accessible | current | List of configured transcode HEVC operations |
| 1.3.6.1.4.1.35902.1.6.39.1 | RowoperationTranscodeHEVCEntry | not-accessible | current | Properties for a single configured transcode HEVC operation |
| 1.3.6.1.4.1.35902.1.6.39.1.1 | ColumnoperationTranscodeHEVCInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.39.1.2 | ColumnoperationTranscodeHEVCPID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, a video PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.39.1.3 | ColumnoperationTranscodeHEVCDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.39.1.4 | ColumnoperationTranscodeHEVCBitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.39.1.5 | ColumnoperationTranscodeHEVCVbvBuffer | read-write | current | CPB buffer size This field shows or sets the encoding CPB buffer size, in bits. When set to 0, a CPB buffer is automatically calculated from 4/5 of a GOP. |
| 1.3.6.1.4.1.35902.1.6.39.1.6 | ColumnoperationTranscodeHEVCBitdepth | read-write | current | Bit depth This field shows or sets the encoding bit depth. |
| 1.3.6.1.4.1.35902.1.6.39.1.7 | ColumnoperationTranscodeHEVCProfile | read-write | current | HEVC profile This field shows or sets the encoding profile. |
| 1.3.6.1.4.1.35902.1.6.39.1.8 | ColumnoperationTranscodeHEVCTier | read-write | current | HEVC tier This field shows or sets the encoding tier. |
| 1.3.6.1.4.1.35902.1.6.39.1.9 | ColumnoperationTranscodeHEVCLevel | read-write | current | HEVC level This field shows or sets the encoding level. When set to auto, the best level is chosen from the bitrate. |
| 1.3.6.1.4.1.35902.1.6.39.1.10 | ColumnoperationTranscodeHEVCSpeed | read-write | current | Encoding speed This field shows or sets the encoding speed. Bear in mind that slower presets take more CPU, and you shouldn't saturate the server. |
| 1.3.6.1.4.1.35902.1.6.39.1.11 | ColumnoperationTranscodeHEVCTuning | read-write | current | Encoder tuning This field shows or sets the encoder tuning. When different to none, psychovisual enhancements will be applied for the selected type of content. |
| 1.3.6.1.4.1.35902.1.6.39.1.12 | ColumnoperationTranscodeHEVCFastDecode | read-write | current | Tune for fast decode When enabled, encoding algorithms will be tuned for faster decode on clients, at the expense of a lower quality. |
| 1.3.6.1.4.1.35902.1.6.39.1.13 | ColumnoperationTranscodeHEVCGOP | read-write | current | GOP size This field shows or sets the GOP size, in frames. |
| 1.3.6.1.4.1.35902.1.6.39.1.14 | ColumnoperationTranscodeHEVCMinGOP | read-write | current | Minimum GOP size This field shows or sets the minimum GOP size, in frames. It must be lower or equal to the GOP size. |
| 1.3.6.1.4.1.35902.1.6.39.1.15 | ColumnoperationTranscodeHEVCCloseGOP | read-write | current | Close GOP When enabled, the GOPs will be closed. |
| 1.3.6.1.4.1.35902.1.6.39.1.16 | ColumnoperationTranscodeHEVCBFrames | read-write | current | B frames This field shows or sets the number of B frames. |
| 1.3.6.1.4.1.35902.1.6.39.1.17 | ColumnoperationTranscodeHEVCBPyramid | read-write | current | B pyramid This field shows or sets whether B frames may act as reference pictures. |
| 1.3.6.1.4.1.35902.1.6.39.1.18 | ColumnoperationTranscodeHEVCWidth | read-write | current | Width This field shows or sets the width of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.19 | ColumnoperationTranscodeHEVCHeight | read-write | current | Height This field shows or sets the height of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.20 | ColumnoperationTranscodeHEVCDeinterlace | read-write | current | Deinterlace This field activates or deactivates deinterlacing of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.21 | ColumnoperationTranscodeHEVCAspect | read-write | current | Aspect ratio This field shows or sets the aspect ratio of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.22 | ColumnoperationTranscodeHEVCFps | read-write | current | Frame rate This field shows or sets the frame rate the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.23 | ColumnoperationTranscodeHEVCOverscan | read-write | current | Overscan This field shows or sets whether the overscan flag should be set on the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.24 | ColumnoperationTranscodeHEVCMode | read-write | current | Bitrate mode This field shows or sets the bitrate mode of the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.25 | ColumnoperationTranscodeHEVCNoiseReduction | read-write | current | Noise reduction This field shows or sets the noise reduction applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.26 | ColumnoperationTranscodeHEVCForceKeyframe | read-write | current | Force keyframe This field shows or sets the date of the next forced insertion of a keyframe, if defined. |
| 1.3.6.1.4.1.35902.1.6.39.1.27 | ColumnoperationTranscodeHEVCChromaSubsampling | read-write | current | Chroma subsampling This field shows or sets the chroma subsampling applied to the encoded video. |
| 1.3.6.1.4.1.35902.1.6.39.1.28 | ColumnoperationTranscodeHEVCBAdapt | read-write | current | Adaptive B-frame This field shows or sets the adaptive B-frame decision method. |
| 1.3.6.1.4.1.35902.1.6.39.1.29 | ColumnoperationTranscodeHEVCDecoderThreads | read-write | current | Decoder threads This field shows or sets the number of threads for the decoder (only used if the function is a remux function). Set to 0 for automatic detectio… |
| 1.3.6.1.4.1.35902.1.6.39.1.30 | ColumnoperationTranscodeHEVCDecoderIndex | read-write | current | Decoder This field references an entry in the video accel table, which is used as the hardware decoder of the transcode hevc operation (only used if the functi… |
| 1.3.6.1.4.1.35902.1.6.39.1.31 | ColumnoperationTranscodeHEVCEncoderIndex | read-write | current | Encoder This field references an entry in the video accel table, which is used as the hardware encoder of the transcode hevc operation. Set to 0 for software e… |
| 1.3.6.1.4.1.35902.1.6.39.1.32 | ColumnoperationTranscodeHEVCLookaheadDepth | read-write | current | Lookahead depth This field shows or sets the number of lookahead frames. Lookahead analysis can increase encoder quality at the expense of performance, delay a… |
| 1.3.6.1.4.1.35902.1.6.40 | TableoperationOverlayTimecodeTable | not-accessible | current | List of configured overlay timecode operations |
| 1.3.6.1.4.1.35902.1.6.40.1 | RowoperationOverlayTimecodeEntry | not-accessible | current | Properties for a single configured overlay timecode operation |
| 1.3.6.1.4.1.35902.1.6.40.1.1 | ColumnoperationOverlayTimecodeZIndex | read-write | current | Z-index This field shows or sets the z-index of the operation in the output frame. When there are several overlay operations, operations with a higher z-index … |
| 1.3.6.1.4.1.35902.1.6.40.1.2 | ColumnoperationOverlayTimecodeAlpha | read-write | current | Alpha multiplier This field shows or sets the alpha multiplier of the operation in the output frame. The alpha channel of the input is multiplied by this coeff… |
| 1.3.6.1.4.1.35902.1.6.40.1.3 | ColumnoperationOverlayTimecodeOutputLeftOffset | read-write | current | Output left offset This field shows or sets the left offset in the output frame, after which the overlay placement starts. |
| 1.3.6.1.4.1.35902.1.6.40.1.4 | ColumnoperationOverlayTimecodeOutputRightOffset | read-write | current | Output right offset This field shows or sets the right offset in the output frame, before which the overlay placement ends. |
| 1.3.6.1.4.1.35902.1.6.40.1.5 | ColumnoperationOverlayTimecodeOutputTopOffset | read-write | current | Output top offset This field shows or sets the top offset in the output frame, after which the overlay placement starts. |
| 1.3.6.1.4.1.35902.1.6.40.1.6 | ColumnoperationOverlayTimecodeOutputBottomOffset | read-write | current | Output bottom offset This field shows or sets the bottom offset in the output frame, before which the overlay placement ends. |
| 1.3.6.1.4.1.35902.1.6.40.1.7 | ColumnoperationOverlayTimecodeTimezone | read-write | current | Time zone This field shows or sets the time zone in which the timecode is evaluated. To disable it, set an empty string. Please pay attention to the fact that … |
| 1.3.6.1.4.1.35902.1.6.40.1.8 | ColumnoperationOverlayTimecodeFormat | read-write | current | Format This field shows or sets the timecode format in which the timecode is represented. The default is empty, equivalent to %H:%M:%S.%f printed hours:minutes… |
| 1.3.6.1.4.1.35902.1.6.40.1.9 | ColumnoperationOverlayTimecodeForegroundColor | read-write | current | Foreground color This field shows or sets the timecode foreground color. |
| 1.3.6.1.4.1.35902.1.6.40.1.10 | ColumnoperationOverlayTimecodeBackgroundColor | read-write | current | Background color This field shows or sets the timecode background color. |
| 1.3.6.1.4.1.35902.1.6.40.1.11 | ColumnoperationOverlayTimecodeOffset | read-write | current | Time offset This field shows or sets a fixed time offset to apply in 27 MHz ticks. |
| 1.3.6.1.4.1.35902.1.6.41 | TableoperationTransmitSrtInputTable | not-accessible | current | List of configured transmit SRT input operations |
| 1.3.6.1.4.1.35902.1.6.41.1 | RowoperationTransmitSrtInputEntry | not-accessible | current | Properties for a single configured transmit SRT input operation |
| 1.3.6.1.4.1.35902.1.6.41.1.1 | ColumnoperationTransmitSrtInputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the transmit SRT input operation. The output must be a net or local… |
| 1.3.6.1.4.1.35902.1.6.41.1.2 | ColumnoperationTransmitSrtInputStreamID | read-write | current | Stream ID This shows or sets the stream ID which will be selected as an output to this operation. Leave empty to disable stream multiplexing. |
| 1.3.6.1.4.1.35902.1.6.41.1.3 | ColumnoperationTransmitSrtInputBitrate | read-only | current | Current bitrate This field shows the current bitrate of the operation (0 if not available). |
| 1.3.6.1.4.1.35902.1.6.41.1.4 | ColumnoperationTransmitSrtInputRTT | read-only | current | RTT This field shows the current round-trip time of the connection in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.6.41.1.5 | ColumnoperationTransmitSrtInputRecovered | read-only | current | Recovered packets rate This field shows the current rate of recovered packets. |
| 1.3.6.1.4.1.35902.1.6.41.1.6 | ColumnoperationTransmitSrtInputLost | read-only | current | Lost packets rate This field shows the current rate of lost packets. |
| 1.3.6.1.4.1.35902.1.6.41.1.7 | ColumnoperationTransmitSrtInputRecoveredCount | read-only | current | Recovered packets This field shows the current count of recovered packets. |
| 1.3.6.1.4.1.35902.1.6.41.1.8 | ColumnoperationTransmitSrtInputLostCount | read-only | current | Lost packets This field shows the current count of lost packets. |
| 1.3.6.1.4.1.35902.1.6.41.1.9 | ColumnoperationTransmitSrtInputLatency | read-only | current | Latency This field shows the negotiated latency (in milliseconds) for this connection. |
| 1.3.6.1.4.1.35902.1.6.42 | TableoperationTransmitSrtOutputTable | not-accessible | current | List of configured transmit SRT output operations |
| 1.3.6.1.4.1.35902.1.6.42.1 | RowoperationTransmitSrtOutputEntry | not-accessible | current | Properties for a single configured transmit SRT output operation |
| 1.3.6.1.4.1.35902.1.6.42.1.1 | ColumnoperationTransmitSrtOutputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the transmit SRT output operation. The output must be a net, pointer … |
| 1.3.6.1.4.1.35902.1.6.42.1.2 | ColumnoperationTransmitSrtOutputStreamID | read-write | current | Stream ID This shows or sets the stream ID which will be set in this output stream. This allows multiplexing several streams through a single SRT endpoint. Lea… |
| 1.3.6.1.4.1.35902.1.6.42.1.3 | ColumnoperationTransmitSrtOutputBitrate | read-only | current | Current bitrate This field shows the current bitrate of the operation (0 if not available). |
| 1.3.6.1.4.1.35902.1.6.42.1.4 | ColumnoperationTransmitSrtOutputRTT | read-only | current | RTT This field shows the current round-trip time of the connection in units of a 27 MHz clock. This is the maximum RTT of all connected clients for functions i… |
| 1.3.6.1.4.1.35902.1.6.42.1.5 | ColumnoperationTransmitSrtOutputRetransmitted | read-only | current | Retransmitted packets rate This field shows the current rate of retransmitted packets. |
| 1.3.6.1.4.1.35902.1.6.42.1.6 | ColumnoperationTransmitSrtOutputClients | read-only | current | Clients This field shows the number of connected clients, for functions in listener mode. |
| 1.3.6.1.4.1.35902.1.6.42.1.7 | ColumnoperationTransmitSrtOutputRetransmittedCount | read-only | current | Retransmitted packets This field shows the current count of retransmitted packets. |
| 1.3.6.1.4.1.35902.1.6.42.1.8 | ColumnoperationTransmitSrtOutputMaxClients | read-write | current | Max clients This field shows or sets the maximum number of connected clients, for functions in listener mode. Set to 0 to allow an unlimited number of clients. |
| 1.3.6.1.4.1.35902.1.6.42.1.9 | ColumnoperationTransmitSrtOutputLatency | read-only | current | Latency This field shows the highest negotiated latency (in milliseconds) of all connected clients. |
| 1.3.6.1.4.1.35902.1.6.42.1.10 | ColumnoperationTransmitSrtOutputMaxBandwidth | read-write | current | Max bandwidth This field shows or sets the maximum bandwidth (in bits/s) to be used for this stream, including retransmitted packets. Set to 0 for unlimited ba… |
| 1.3.6.1.4.1.35902.1.6.43 | TableoperationTransmitRistInputTable | not-accessible | current | List of configured transmit RIST input operations |
| 1.3.6.1.4.1.35902.1.6.43.1 | RowoperationTransmitRistInputEntry | not-accessible | current | Properties for a single configured transmit RIST input operation |
| 1.3.6.1.4.1.35902.1.6.43.1.1 | ColumnoperationTransmitRistInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the transmit RIST input operation. The input must be a net node. The … |
| 1.3.6.1.4.1.35902.1.6.43.1.2 | ColumnoperationTransmitRistInputBitrate | read-only | current | Current bitrate This field shows the current bitrate of the operation (0 if not available). |
| 1.3.6.1.4.1.35902.1.6.43.1.3 | ColumnoperationTransmitRistInputRTT | read-only | current | RTT This field shows the current round trip time of the connection in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.6.44 | TableoperationTransmitRistOutputTable | not-accessible | current | List of configured transmit RIST output operations |
| 1.3.6.1.4.1.35902.1.6.44.1 | RowoperationTransmitRistOutputEntry | not-accessible | current | Properties for a single configured transmit RIST output operation |
| 1.3.6.1.4.1.35902.1.6.44.1.1 | ColumnoperationTransmitRistOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the transmit RIST output operation. The output must be a net node. … |
| 1.3.6.1.4.1.35902.1.6.44.1.2 | ColumnoperationTransmitRistOutputWeight | read-write | current | Weight This field shows or sets the weight of the output node in the transmit RIST output function. Data are sent to the output nodes in amounts proportional t… |
| 1.3.6.1.4.1.35902.1.6.44.1.3 | ColumnoperationTransmitRistOutputBitrate | read-only | current | Current bitrate This field shows the current bitrate of the operation (0 if not available). |
| 1.3.6.1.4.1.35902.1.6.44.1.4 | ColumnoperationTransmitRistOutputRTT | read-only | current | RTT This field shows the current round trip time of the connection in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.6.44.1.5 | ColumnoperationTransmitRistOutputRetransmitted | read-only | current | Retransmitted packets rate This field shows the current rate of retransmitted packets. |
| 1.3.6.1.4.1.35902.1.6.44.1.6 | ColumnoperationTransmitRistOutputRetransmittedCount | read-only | current | Retransmitted packets This field shows the current count of retransmitted packets. |
| 1.3.6.1.4.1.35902.1.6.45 | TableoperationMosaicChartNetTable | not-accessible | current | List of configured mosaic net chart operations |
| 1.3.6.1.4.1.35902.1.6.45.1 | RowoperationMosaicChartNetEntry | not-accessible | current | Properties for a single configured mosaic net chart operation |
| 1.3.6.1.4.1.35902.1.6.45.1.1 | ColumnoperationMosaicChartNetPosition | read-write | current | Position This field shows or sets the position in the mosaic from the top-left corner, left to right then top to bottom, starting from 1. For automatic placeme… |
| 1.3.6.1.4.1.35902.1.6.45.1.2 | ColumnoperationMosaicChartNetIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the mosaic net chart operation. The input must be a net, pointer or … |
| 1.3.6.1.4.1.35902.1.6.45.1.3 | ColumnoperationMosaicChartNetRowSpan | read-write | current | Row span This field shows or sets the number of rows this cell should span vertically. |
| 1.3.6.1.4.1.35902.1.6.45.1.4 | ColumnoperationMosaicChartNetColSpan | read-write | current | Column span This field shows or sets the number of columns this cell should span horizontally. |
| 1.3.6.1.4.1.35902.1.6.45.1.5 | ColumnoperationMosaicChartNetLabel | read-write | current | Label This field shows or sets the label for the mosaic chart net operation. |
| 1.3.6.1.4.1.35902.1.6.45.1.6 | ColumnoperationMosaicChartNetLabelForegroundColor | read-write | current | Label foreground color This field shows or sets the label foreground color. Leave empty to use default value from the mosaic function. |
| 1.3.6.1.4.1.35902.1.6.45.1.7 | ColumnoperationMosaicChartNetLabelBackgroundColor | read-write | current | Label background color This field shows or sets the label background color. Leave empty to use default value from the mosaic function. |
| 1.3.6.1.4.1.35902.1.6.45.1.8 | ColumnoperationMosaicChartNetHistoryDuration | read-write | current | History duration This field shows or set the duration of the history, in seconds. |
| 1.3.6.1.4.1.35902.1.6.45.1.9 | ColumnoperationMosaicChartNetTargetBitrate | read-write | current | Target bitrate This field shows or set the target bitrate (in bits/s) for the mosaic net chart operation. Set to 0 to disable the target bitrate indicator. |
| 1.3.6.1.4.1.35902.1.6.46 | TableoperationPackageMediaTable | not-accessible | current | List of configured package media operations |
| 1.3.6.1.4.1.35902.1.6.46.1 | RowoperationPackageMediaEntry | not-accessible | current | Properties for a single configured package media operation |
| 1.3.6.1.4.1.35902.1.6.46.1.1 | ColumnoperationPackageMediaPosition | read-write | current | Position This field shows or sets the position in the master playlist, starting from 1. For automatic placement, set to 0. |
| 1.3.6.1.4.1.35902.1.6.46.1.2 | ColumnoperationPackageMediaPIDs | read-write | current | PIDs This string specifies a comma-separated list of PIDs to multiplex together in the media package. If no PID is specified, all PIDs belonging to the service… |
| 1.3.6.1.4.1.35902.1.6.46.1.3 | ColumnoperationPackageMediaSegmentsPath | read-write | current | Segments path This field shows or sets the path at which the media segments will be made available (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.6.46.1.4 | ColumnoperationPackageMediaInitSectionsPath | read-write | current | Media Initialization Sections path This field shows or sets the path at which the media initialization sections will be made available (/<origin path>/<path>).… |
| 1.3.6.1.4.1.35902.1.6.46.1.5 | ColumnoperationPackageMediaFormat | read-write | current | Media format This field shows or sets the media segments format. Use auto to choose between packed audio and fmp4 depending on the elementary stream codec. |
| 1.3.6.1.4.1.35902.1.6.46.1.6 | ColumnoperationPackageMediaHls | read-write | current | Enable HLS Enable this to package this media for HLS. |
| 1.3.6.1.4.1.35902.1.6.46.1.7 | ColumnoperationPackageMediaHlsPath | read-write | current | HLS playlist path This field shows or sets the path at which the HLS media playlist will be made available (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.6.46.1.8 | ColumnoperationPackageMediaHlsHDCPLevel | read-write | current | HLS HDCP level This field shows or sets the level of copy protection for this media playlist. |
| 1.3.6.1.4.1.35902.1.6.46.1.9 | ColumnoperationPackageMediaHlsAudioGroupId | read-write | current | HLS audio group ID This field shows or sets the optional group ID of audio renditions. |
| 1.3.6.1.4.1.35902.1.6.46.1.10 | ColumnoperationPackageMediaHlsVideoGroupId | read-write | current | HLS video group ID This field shows or sets the optional group ID of video renditions. |
| 1.3.6.1.4.1.35902.1.6.46.1.11 | ColumnoperationPackageMediaHlsRenditionType | read-write | current | HLS rendition type This field shows or sets the type of HLS rendition to use for this media playlist. |
| 1.3.6.1.4.1.35902.1.6.46.1.12 | ColumnoperationPackageMediaHlsRenditionGroupId | read-write | current | HLS rendition group This field shows or sets the group to which the HLS rendition belongs. |
| 1.3.6.1.4.1.35902.1.6.46.1.13 | ColumnoperationPackageMediaHlsRenditionDefault | read-write | current | HLS default rendition Set to yes on the default HLS rendition. Only one rendition may have this flag. |
| 1.3.6.1.4.1.35902.1.6.46.1.14 | ColumnoperationPackageMediaHlsRenditionAutoSelect | read-write | current | Auto-select HLS rendition This field shows or sets the auto-select flag on the HLS rendition. |
| 1.3.6.1.4.1.35902.1.6.46.1.15 | ColumnoperationPackageMediaHlsRenditionName | read-write | current | HLS rendition name This field shows or sets the optional name of the HLS rendition. |
| 1.3.6.1.4.1.35902.1.6.46.1.16 | ColumnoperationPackageMediaHlsRenditionLanguage | read-write | current | HLS rendition language This field shows or sets the optional language tag (RFC 5646) of the HLS rendition. |
| 1.3.6.1.4.1.35902.1.6.46.1.17 | ColumnoperationPackageMediaHlsEncryptionMethod | read-write | current | HLS encryption method This field shows or sets the encryption method for this HLS media playlist. |
| 1.3.6.1.4.1.35902.1.6.46.1.18 | ColumnoperationPackageMediaHlsEncryptionKey | read-write | current | HLS encryption key This field shows or sets the 128-bit encryption key, in hexadecimal format, for this HLS media playlist. |
| 1.3.6.1.4.1.35902.1.6.46.1.19 | ColumnoperationPackageMediaHlsEncryptionIV | read-write | current | HLS encryption IV This field shows or sets the 128-bit encryption Initialization Vector, in hexadecimal format, for this HLS media playlist. Leave empty if the… |
| 1.3.6.1.4.1.35902.1.6.46.1.20 | ColumnoperationPackageMediaHlsEncryptionKeyPath | read-write | current | HLS encryption key path This field shows or sets the path at which the key file will be made available (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.6.46.1.21 | ColumnoperationPackageMediaHlsIframePath | read-write | current | HLS I-frame playlist path This field shows or sets the path at which the HLS I-frame playlist will be made available (/<origin path>/<path>). |
| 1.3.6.1.4.1.35902.1.6.46.1.22 | ColumnoperationPackageMediaHttpPath | read-write | current | HTTP path This field shows or sets the path to which the segments will be pushed when using a HTTP output. |
| 1.3.6.1.4.1.35902.1.6.46.1.23 | ColumnoperationPackageMediaRole | read-write | current | Role This field shows or sets the DASH role for this media, as defined for CMAF Ingest. |
| 1.3.6.1.4.1.35902.1.6.46.1.24 | ColumnoperationPackageMediaDash | read-write | current | Enable DASH Enable this to package this media for MPEG-DASH. |
| 1.3.6.1.4.1.35902.1.6.46.1.25 | ColumnoperationPackageMediaBandwidth | read-write | current | Bandwidth This field shows or sets the bandwidth attribute (in bits/s) for this variant stream. If set to 0, bandwidth will be automatically calculated. |
| 1.3.6.1.4.1.35902.1.6.46.1.26 | ColumnoperationPackageMediaHlsPrefix | read-write | current | HLS playlist prefix This field shows or sets the URI prefix for this variant stream in the HLS multivariant playlist. This may be used to specify duplicate rem… |
| 1.3.6.1.4.1.35902.1.6.46.1.27 | ColumnoperationPackageMediaCodecs | read-write | current | Codecs This field shows or sets the codecs attribute for this variant stream. If unset, codecs will be automatically determined from the input stream. |
| 1.3.6.1.4.1.35902.1.6.46.1.28 | ColumnoperationPackageMediaHlsVariables | read-write | current | HLS variables This field shows or sets the variable definitions to include in the media playlist for this variant stream. Variables are specified as a newline … |
| 1.3.6.1.4.1.35902.1.6.46.1.29 | ColumnoperationPackageMediaHlsSubtitlesGroupId | read-write | current | HLS subtitles group ID This field shows or sets the optional group ID of subtitles renditions. |
| 1.3.6.1.4.1.35902.1.6.46.1.30 | ColumnoperationPackageMediaHlsRenditionForced | read-write | current | HLS forced rendition This field shows or sets the forced flag on the HLS rendition. |
| 1.3.6.1.4.1.35902.1.6.46.1.31 | ColumnoperationPackageMediaTeletextMagazine | read-write | current | Teletext magazine This field shows or sets the Teletext magazine to use for WebVTT subtitles conversion. Only used for subtitles renditions. |
| 1.3.6.1.4.1.35902.1.6.46.1.32 | ColumnoperationPackageMediaTeletextPage | read-write | current | Teletext page This field shows or sets the Teletext page to use for WebVTT subtitles conversion. Only used for subtitles renditions. Leave empty to use the fir… |
| 1.3.6.1.4.1.35902.1.6.46.1.33 | ColumnoperationPackageMediaSubtitlesLayout | read-write | current | Subtitles layout This field shows or sets the extent of layout conversion performed by the package media operation. Partial conversion only performs what is be… |
| 1.3.6.1.4.1.35902.1.6.46.1.34 | ColumnoperationPackageMediaHlsStableId | read-write | current | HLS stable ID This field shows or sets the stable identifier for this stream. It is declared as STABLE-VARIANT-ID or STABLE-RENDITION-ID in HLS playlists. This… |
| 1.3.6.1.4.1.35902.1.6.47 | TableoperationWatermarkEmbedTable | not-accessible | current | List of configured watermark embed operations |
| 1.3.6.1.4.1.35902.1.6.47.1 | RowoperationWatermarkEmbedEntry | not-accessible | current | Properties for a single configured watermark embed operation |
| 1.3.6.1.4.1.35902.1.6.47.1.1 | ColumnoperationWatermarkEmbedPID | read-write | current | PID This field shows or sets the PID on which watermarking is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.47.1.2 | ColumnoperationWatermarkEmbedLicense | read-write | current | License This string specifies the Kantar Media license as a string. |
| 1.3.6.1.4.1.35902.1.6.47.1.3 | ColumnoperationWatermarkEmbedAudienceLicense | read-write | current | Audience license This string specifies the Kantar Media audience license as a string. |
| 1.3.6.1.4.1.35902.1.6.47.1.4 | ColumnoperationWatermarkEmbedPassword | read-write | current | License password This field allows the user to enter the password for the license file. |
| 1.3.6.1.4.1.35902.1.6.47.1.5 | ColumnoperationWatermarkEmbedChannel | read-write | current | Channel name This field allows the user to enter the channel name to use. |
| 1.3.6.1.4.1.35902.1.6.48 | TableoperationGridFilterInputTable | not-accessible | current | List of configured grid filter input operations |
| 1.3.6.1.4.1.35902.1.6.48.1 | RowoperationGridFilterInputEntry | not-accessible | current | Properties for a single configured grid filter input operation |
| 1.3.6.1.4.1.35902.1.6.48.1.1 | ColumnoperationGridFilterInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as input of the grid filter input operation. The node must be a video, audio or poin… |
| 1.3.6.1.4.1.35902.1.6.48.1.2 | ColumnoperationGridFilterInputLabel | read-write | current | Label This field shows or sets the link label of the grid filter input operation. This label can be used to reference this operation in the filter graph descri… |
| 1.3.6.1.4.1.35902.1.6.48.1.3 | ColumnoperationGridFilterInputFps | read-write | current | Frame rate This field shows or sets the frame rate of the input video. |
| 1.3.6.1.4.1.35902.1.6.49 | TableoperationGridFilterOutputTable | not-accessible | current | List of configured grid filter output operations |
| 1.3.6.1.4.1.35902.1.6.49.1 | RowoperationGridFilterOutputEntry | not-accessible | current | Properties for a single configured grid filter output operation |
| 1.3.6.1.4.1.35902.1.6.49.1.1 | ColumnoperationGridFilterOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as output of the grid filter output operation. The node must be a video or audio no… |
| 1.3.6.1.4.1.35902.1.6.49.1.2 | ColumnoperationGridFilterOutputLabel | read-write | current | Label This field shows or sets the link label of the grid filter output operation. This label can be used to reference this operation in the filter graph descr… |
| 1.3.6.1.4.1.35902.1.6.49.1.3 | ColumnoperationGridFilterOutputDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.50 | TableoperationMapPIDTable | not-accessible | current | List of configured map PID operations |
| 1.3.6.1.4.1.35902.1.6.50.1 | RowoperationMapPIDEntry | not-accessible | current | Properties for a single configured map PID operation |
| 1.3.6.1.4.1.35902.1.6.50.1.1 | ColumnoperationMapPIDInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation. The input must be an es node. The operation cannot be… |
| 1.3.6.1.4.1.35902.1.6.50.1.2 | ColumnoperationMapPIDToPID | read-write | current | PID This shows or sets the PID that is applied to the relevant elementary stream. |
| 1.3.6.1.4.1.35902.1.6.50.1.3 | ColumnoperationMapPIDBitrate | read-write | current | Bitrate This field shows or sets the stream bitrate to overwrite in bits/s if not 0. |
| 1.3.6.1.4.1.35902.1.6.50.1.4 | ColumnoperationMapPIDBufferSize | read-write | current | Buffer size This field shows or sets the stream buffer size to overwrite in bits if not 0. |
| 1.3.6.1.4.1.35902.1.6.50.1.5 | ColumnoperationMapPIDDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.50.1.6 | ColumnoperationMapPIDPESMinDuration | read-write | current | PES minimum duration This field shows or sets the PES minimum duration (in units of a 27MHz clock) for audio streams. Use 0 for default. |
| 1.3.6.1.4.1.35902.1.6.50.1.7 | ColumnoperationMapPIDLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to apply to the stream (leave it empty to use input value). |
| 1.3.6.1.4.1.35902.1.6.51 | TableoperationTransmitSpsInputTable | not-accessible | current | List of configured transmit SPS input operations |
| 1.3.6.1.4.1.35902.1.6.51.1 | RowoperationTransmitSpsInputEntry | not-accessible | current | Properties for a single configured transmit SPS input operation |
| 1.3.6.1.4.1.35902.1.6.51.1.1 | ColumnoperationTransmitSpsInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as an input of the transmit SPS input operation. The input must be a net node with R… |
| 1.3.6.1.4.1.35902.1.6.51.1.2 | ColumnoperationTransmitSpsInputDelay | read-only | current | Delay This field shows the input delay (in units of a 27MHz clock) relative to the fastest received packet. |
| 1.3.6.1.4.1.35902.1.6.52 | TableoperationTransmitSpsOutputTable | not-accessible | current | List of configured transmit SPS output operations |
| 1.3.6.1.4.1.35902.1.6.52.1 | RowoperationTransmitSpsOutputEntry | not-accessible | current | Properties for a single configured transmit SPS output operation |
| 1.3.6.1.4.1.35902.1.6.52.1.1 | ColumnoperationTransmitSpsOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the transmit SPS output operation. The output must be a net node wi… |
| 1.3.6.1.4.1.35902.1.6.53 | TableoperationInjectDvbsubTable | not-accessible | current | List of configured PID injection operations |
| 1.3.6.1.4.1.35902.1.6.53.1 | RowoperationInjectDvbsubEntry | not-accessible | current | Properties for a single configured PID injection operation |
| 1.3.6.1.4.1.35902.1.6.53.1.1 | ColumnoperationInjectDvbsubInputIndex | read-write | current | Input node This shows or sets the node used for TS input. The input must be a net, pointer or local node. The function cannot be operational unless an operatio… |
| 1.3.6.1.4.1.35902.1.6.53.1.2 | ColumnoperationInjectDvbsubFromPID | read-write | current | Old PID This shows or sets the old PID that is used to detect the relevant elementary stream, if not 0. |
| 1.3.6.1.4.1.35902.1.6.53.1.3 | ColumnoperationInjectDvbsubToPID | read-write | current | New PID This shows or sets the new PID that is applied to the relevant elementary stream, if not 0. |
| 1.3.6.1.4.1.35902.1.6.53.1.4 | ColumnoperationInjectDvbsubDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.53.1.5 | ColumnoperationInjectDvbsubLanguage | read-write | current | Language This shows or sets the ISO-639 three-letter audio language that is used for this stream. |
| 1.3.6.1.4.1.35902.1.6.53.1.6 | ColumnoperationInjectDvbsubType | read-write | current | Type This shows or sets the component type that is used for this stream. |
| 1.3.6.1.4.1.35902.1.6.53.1.7 | ColumnoperationInjectDvbsubComposition | read-write | current | Composition This shows or sets the composition page id that is used for this stream. |
| 1.3.6.1.4.1.35902.1.6.53.1.8 | ColumnoperationInjectDvbsubAncillary | read-write | current | Ancillary This shows or sets the ancillary page id that is used for this stream. |
| 1.3.6.1.4.1.35902.1.6.54 | TableoperationGridPlayMonoTable | not-accessible | current | List of configured grid play mono operations |
| 1.3.6.1.4.1.35902.1.6.54.1 | RowoperationGridPlayMonoEntry | not-accessible | current | Properties for a single configured grid play mono operation |
| 1.3.6.1.4.1.35902.1.6.54.1.1 | ColumnoperationGridPlayMonoInputIndex | read-write | current | Input Node This field references an entry in the node table, which is used as an input of grid play mono operation. The input must be an audio or pointer node.… |
| 1.3.6.1.4.1.35902.1.6.54.1.2 | ColumnoperationGridPlayMonoChannel | read-write | current | Channel number This field shows or sets the channel number present in the video RX link. |
| 1.3.6.1.4.1.35902.1.6.54.1.3 | ColumnoperationGridPlayMonoDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.55 | TableoperationGridPlayStereoTable | not-accessible | current | List of configured grid play stereo operations |
| 1.3.6.1.4.1.35902.1.6.55.1 | RowoperationGridPlayStereoEntry | not-accessible | current | Properties for a single configured grid play stereo operation |
| 1.3.6.1.4.1.35902.1.6.55.1.1 | ColumnoperationGridPlayStereoInputIndex | read-write | current | Input Node This field references an entry in the node table, which is used as an input of grid play stereo operation. The input must be an audio or pointer nod… |
| 1.3.6.1.4.1.35902.1.6.55.1.2 | ColumnoperationGridPlayStereoChannel | read-write | current | Pair number This field shows or sets the channel pair number in the video TX link. |
| 1.3.6.1.4.1.35902.1.6.55.1.3 | ColumnoperationGridPlayStereoDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.56 | TableoperationConvertScte35Table | not-accessible | current | List of configured convert SCTE-35 operations |
| 1.3.6.1.4.1.35902.1.6.56.1 | RowoperationConvertScte35Entry | not-accessible | current | Properties for a single configured convert SCTE-35 operation |
| 1.3.6.1.4.1.35902.1.6.56.1.1 | ColumnoperationConvertScte35PID | read-write | current | PID This field shows or sets the PID on which conversion is applied. When set to 0, a SCTE-35 PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.56.1.2 | ColumnoperationConvertScte35From | read-write | current | From This field shows or sets the SCTE-35 event to look for. |
| 1.3.6.1.4.1.35902.1.6.56.1.3 | ColumnoperationConvertScte35To | read-write | current | To This field shows or sets the SCTE-35 event to convert to. |
| 1.3.6.1.4.1.35902.1.6.56.1.4 | ColumnoperationConvertScte35AutoReturn | read-write | current | Auto return This field shows or sets whether the event of the convert scte35 operation automatically returns after the duration. |
| 1.3.6.1.4.1.35902.1.6.57 | TableoperationMuxServiceTable | not-accessible | current | List of configured mux service operations |
| 1.3.6.1.4.1.35902.1.6.57.1 | RowoperationMuxServiceEntry | not-accessible | current | Properties for a single configured mux service operation |
| 1.3.6.1.4.1.35902.1.6.57.1.1 | ColumnoperationMuxServiceSid | read-write | current | Service ID This field shows or sets the service ID for this service. |
| 1.3.6.1.4.1.35902.1.6.57.1.2 | ColumnoperationMuxServicePmtPid | read-write | current | PMT PID This field shows or sets the PMT PID for this service. |
| 1.3.6.1.4.1.35902.1.6.57.1.3 | ColumnoperationMuxServiceName | read-write | current | Service Name This string shows or sets the service name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.6.57.1.4 | ColumnoperationMuxServiceProvider | read-write | current | Provider Name This string shows or sets the provider name that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.6.57.1.5 | ColumnoperationMuxServiceType | read-write | current | Service type This string shows or sets the service type that is written in the SDT of an outgoing stream (if DVB conformance is enabled). |
| 1.3.6.1.4.1.35902.1.6.58 | TableoperationMuxVirtualEsTable | not-accessible | current | List of configured mux virtual ES operations |
| 1.3.6.1.4.1.35902.1.6.58.1 | RowoperationMuxVirtualEsEntry | not-accessible | current | Properties for a single configured mux virtual ES operation |
| 1.3.6.1.4.1.35902.1.6.58.1.1 | ColumnoperationMuxVirtualEsPid | read-write | current | PID This field shows or sets the ES PID to map. |
| 1.3.6.1.4.1.35902.1.6.58.1.2 | ColumnoperationMuxVirtualEsService | read-write | current | Service This field shows or sets the output service ID for this ES. |
| 1.3.6.1.4.1.35902.1.6.59 | TableoperationTranscodeDvbsubTable | not-accessible | current | List of configured transcode dvbsub operations |
| 1.3.6.1.4.1.35902.1.6.59.1 | RowoperationTranscodeDvbsubEntry | not-accessible | current | Properties for a single configured transcode dvbsub operation |
| 1.3.6.1.4.1.35902.1.6.59.1.1 | ColumnoperationTranscodeDvbsubInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.59.1.2 | ColumnoperationTranscodeDvbsubPID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, a subtitles PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.59.1.3 | ColumnoperationTranscodeDvbsubLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter subtitles language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.59.1.4 | ColumnoperationTranscodeDvbsubDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.59.1.5 | ColumnoperationTranscodeDvbsubTeletextMagazine | read-write | current | Teletext magazine This field shows or sets the Teletext magazine to transcode. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.59.1.6 | ColumnoperationTranscodeDvbsubTeletextPage | read-write | current | Teletext page This field shows or sets the Teletext page to transcode. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.59.1.7 | ColumnoperationTranscodeDvbsubBackgroundOpacity | read-write | current | Background opacity This field shows or sets the background opacity, in the range 0-255. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.60 | TableoperationTsFilterTable | not-accessible | current | List of configured TS filter operations |
| 1.3.6.1.4.1.35902.1.6.60.1 | RowoperationTsFilterEntry | not-accessible | current | Properties for a single configured TS filter operation |
| 1.3.6.1.4.1.35902.1.6.60.1.1 | ColumnoperationTsFilterRank | read-write | current | Filter rank This field shows or sets the rank of the operation. Filters are inserted by the ts filter function in the ascending rank order. |
| 1.3.6.1.4.1.35902.1.6.60.1.2 | ColumnoperationTsFilterName | read-write | current | Filter name This field shows or sets the name of the filter. |
| 1.3.6.1.4.1.35902.1.6.60.1.3 | ColumnoperationTsFilterParameters | read-write | current | Parameters This field shows or sets a JSON string describing the parameters of the filter. The JSON string describes an array of options (example: [' DEFVAL { |
| 1.3.6.1.4.1.35902.1.6.60.1.4 | ColumnoperationTsFilterNodeIndex | read-write | current | Directory node This field shows or sets a directory node used by the filter. When not null, the file options in the JSON parameters will be prepended by a path… |
| 1.3.6.1.4.1.35902.1.6.61 | TableoperationTransmitRtpOutputTable | not-accessible | current | List of configured transmit RTP output operations |
| 1.3.6.1.4.1.35902.1.6.61.1 | RowoperationTransmitRtpOutputEntry | not-accessible | current | Properties for a single configured transmit RTP output operation |
| 1.3.6.1.4.1.35902.1.6.61.1.1 | ColumnoperationTransmitRtpOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as an output of the transmit RTP output function. The output must be a net node. Th… |
| 1.3.6.1.4.1.35902.1.6.62 | TableoperationDecodeSubtitleTable | not-accessible | current | List of configured decode subtitle operations |
| 1.3.6.1.4.1.35902.1.6.62.1 | RowoperationDecodeSubtitleEntry | not-accessible | current | Properties for a single configured decode subtitle operation |
| 1.3.6.1.4.1.35902.1.6.62.1.1 | ColumnoperationDecodeSubtitleOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the decode subtitle operation. The output must be a subtitle node.… |
| 1.3.6.1.4.1.35902.1.6.62.1.2 | ColumnoperationDecodeSubtitlePID | read-write | current | PID This field shows or sets the PID to decode. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.62.1.3 | ColumnoperationDecodeSubtitleLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language to decode. |
| 1.3.6.1.4.1.35902.1.6.62.1.4 | ColumnoperationDecodeSubtitleDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.62.1.5 | ColumnoperationDecodeSubtitleTeletextMagazine | read-write | current | Teletext magazine This field shows or sets the Teletext magazine to decode. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.62.1.6 | ColumnoperationDecodeSubtitleTeletextPage | read-write | current | Teletext page This field shows or sets the Teletext page to decode. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.62.1.7 | ColumnoperationDecodeSubtitleBackgroundOpacity | read-write | current | Background opacity This field shows or sets the background opacity, in the range 0-255. Only used for input subtitles in DVB Teletext format. |
| 1.3.6.1.4.1.35902.1.6.63 | TableoperationEncodeMetadataTable | not-accessible | current | List of configured encode metadata operations |
| 1.3.6.1.4.1.35902.1.6.63.1 | RowoperationEncodeMetadataEntry | not-accessible | current | Properties for a single configured encode metadata operation |
| 1.3.6.1.4.1.35902.1.6.63.1.1 | ColumnoperationEncodeMetadataPID | read-write | current | PID This field shows or sets the PID on which a metadata stream is added. |
| 1.3.6.1.4.1.35902.1.6.63.1.2 | ColumnoperationEncodeMetadataInterval | read-write | current | Interval This field shows or sets the interval between repetitions of the metadata, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.6.63.1.3 | ColumnoperationEncodeMetadataDate | read-write | current | Start date This field shows or sets the metadata starting date, if defined. |
| 1.3.6.1.4.1.35902.1.6.63.1.4 | ColumnoperationEncodeMetadataDuration | read-write | current | Duration This field shows or sets the duration, in 27 MHz units, of the metadata, if not 0. |
| 1.3.6.1.4.1.35902.1.6.63.1.5 | ColumnoperationEncodeMetadataType | read-write | current | Type This field shows or sets the type of metadata to encode. |
| 1.3.6.1.4.1.35902.1.6.63.1.6 | ColumnoperationEncodeMetadataData | read-write | current | Data This field shows or sets a JSON string describing the metadata to encode. |
| 1.3.6.1.4.1.35902.1.6.64 | TableoperationTranscodeOpusTable | not-accessible | current | List of configured transcode Opus operations |
| 1.3.6.1.4.1.35902.1.6.64.1 | RowoperationTranscodeOpusEntry | not-accessible | current | Properties for a single configured transcode Opus operation |
| 1.3.6.1.4.1.35902.1.6.64.1.1 | ColumnoperationTranscodeOpusInputIndex | read-write | current | Input node This field references an entry in the node table, which is used as the input of the operation (only used if the function is a grid output function).… |
| 1.3.6.1.4.1.35902.1.6.64.1.2 | ColumnoperationTranscodeOpusPID | read-write | current | PID This field shows or sets the PID on which transcoding is applied. When set to 0, an audio PID will be automatically chosen. |
| 1.3.6.1.4.1.35902.1.6.64.1.3 | ColumnoperationTranscodeOpusLanguage | read-write | current | Language This field shows or sets the ISO-639 three-letter audio language on which transcoding is applied. |
| 1.3.6.1.4.1.35902.1.6.64.1.4 | ColumnoperationTranscodeOpusDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.64.1.5 | ColumnoperationTranscodeOpusBitrate | read-write | current | Bitrate This field shows or sets the encoding bitrate. |
| 1.3.6.1.4.1.35902.1.6.64.1.6 | ColumnoperationTranscodeOpusRate | read-write | current | Sample rate This field shows or sets the sample rate of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.64.1.7 | ColumnoperationTranscodeOpusChannels | read-write | current | Channels This field shows or sets the number of channels of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.64.1.8 | ColumnoperationTranscodeOpusCrossblend | read-write | current | Crossblending This field shows or sets the amount of time, in milliseconds, the crossblending will last when changing inputs. |
| 1.3.6.1.4.1.35902.1.6.64.1.9 | ColumnoperationTranscodeOpusApplication | read-write | current | Application This field shows or sets the intended application type. |
| 1.3.6.1.4.1.35902.1.6.64.1.10 | ColumnoperationTranscodeOpusFrameDuration | read-write | current | Frame duration This field shows or sets the duration of an Opus frame. Using a duration of less than 10ms will force usage of low-delay mode. |
| 1.3.6.1.4.1.35902.1.6.64.1.11 | ColumnoperationTranscodeOpusBitrateMode | read-write | current | Bitrate mode This field shows or sets the bitrate mode of the encoded audio. |
| 1.3.6.1.4.1.35902.1.6.64.1.12 | ColumnoperationTranscodeOpusFecExpectedLoss | read-write | current | Expected packet loss This field shows or sets the expected packet loss percentage. Set to 0 to disable inband FEC. |
| 1.3.6.1.4.1.35902.1.6.65 | TableoperationPackageOutputTable | not-accessible | current | List of configured package output operations |
| 1.3.6.1.4.1.35902.1.6.65.1 | RowoperationPackageOutputEntry | not-accessible | current | Properties for a single configured package output operation |
| 1.3.6.1.4.1.35902.1.6.65.1.1 | ColumnoperationPackageOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used as the output of the package output operation. It must be an amazon s3 or http node. |
| 1.3.6.1.4.1.35902.1.6.65.1.2 | ColumnoperationPackageOutputPersistent | read-write | current | Persistent This field shows or sets whether to keep old segments and playlists after they are no longer needed. This can be useful for live-to-vod use cases or… |
| 1.3.6.1.4.1.35902.1.6.65.1.3 | ColumnoperationPackageOutputHlsPlaylistName | read-write | current | HLS playlist name This field shows or sets the file name at which the HLS multivariant playlist will be made available, when enabled. Leave empty to use the de… |
| 1.3.6.1.4.1.35902.1.6.65.1.4 | ColumnoperationPackageOutputDashManifestName | read-write | current | DASH manifest name This field shows or sets the file name at which the DASH manifest will be made available, when enabled. Leave empty to use the default file … |
| 1.3.6.1.4.1.35902.1.6.66 | TableoperationHintMetadataTable | not-accessible | current | List of configured hint metadata operations |
| 1.3.6.1.4.1.35902.1.6.66.1 | RowoperationHintMetadataEntry | not-accessible | current | Properties for a single configured hint metadata operation |
| 1.3.6.1.4.1.35902.1.6.66.1.1 | ColumnoperationHintMetadataPID | read-write | current | PID This field shows or sets the PID to monitor. Set to 0 for automatic selection. |
| 1.3.6.1.4.1.35902.1.6.66.1.2 | ColumnoperationHintMetadataDelay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.66.1.3 | ColumnoperationHintMetadataType | read-write | current | Type This field shows or sets the type of metadata to monitor. |
| 1.3.6.1.4.1.35902.1.6.66.1.4 | ColumnoperationHintMetadataScheduleIndex | read-write | current | Schedule This field references an entry in the schedule table, which is triggered when a metadata event occurs according to the configured type below. |
| 1.3.6.1.4.1.35902.1.6.66.1.5 | ColumnoperationHintMetadataLastData | read-only | current | Data This field shows or sets a JSON string describing the last metadata detected. |
| 1.3.6.1.4.1.35902.1.6.67 | TableoperationGridPlayOP47Table | not-accessible | current | List of configured grid play op47 operations |
| 1.3.6.1.4.1.35902.1.6.67.1 | RowoperationGridPlayOP47Entry | not-accessible | current | Properties for a single configured grid play op47 operation |
| 1.3.6.1.4.1.35902.1.6.67.1.1 | ColumnoperationGridPlayOP47InputIndex | read-write | current | Input This field shows or sets the index of the node that is used as input. |
| 1.3.6.1.4.1.35902.1.6.67.1.2 | ColumnoperationGridPlayOP47Delay | read-write | current | Delay This field shows or sets the delay to apply to the stream in milliseconds. |
| 1.3.6.1.4.1.35902.1.6.68 | TableoperationMonitorFailoverTable | not-accessible | current | List of configured monitor failover operations |
| 1.3.6.1.4.1.35902.1.6.68.1 | RowoperationMonitorFailoverEntry | not-accessible | current | Properties for a single configured monitor failover operation |
| 1.3.6.1.4.1.35902.1.6.68.1.1 | ColumnoperationMonitorFailoverInputIndex | read-write | current | Net node This field references an entry in the node table, which is used to send and receive the announcements of the master server. |
| 1.3.6.1.4.1.35902.1.6.69 | TableoperationOverlayTextTable | not-accessible | current | List of configured overlay text operations |
| 1.3.6.1.4.1.35902.1.6.69.1 | RowoperationOverlayTextEntry | not-accessible | current | Properties for a single configured overlay text operation |
| 1.3.6.1.4.1.35902.1.6.69.1.1 | ColumnoperationOverlayTextPosition | read-write | current | Position This field shows or sets the position in the mosaic from the top-left corner, left to right then top to bottom, starting from 1. |
| 1.3.6.1.4.1.35902.1.6.69.1.2 | ColumnoperationOverlayTextRowSpan | read-write | current | Row span This field shows or sets the number of rows this cell should span vertically. |
| 1.3.6.1.4.1.35902.1.6.69.1.3 | ColumnoperationOverlayTextColSpan | read-write | current | Column span This field shows or sets the number of columns this cell should span horizontally. |
| 1.3.6.1.4.1.35902.1.6.69.1.4 | ColumnoperationOverlayTextZIndex | read-write | current | Z-index This field shows or sets the z-index of the operation in the output frame. When there are several overlay text operations, operations with a higher z-i… |
| 1.3.6.1.4.1.35902.1.6.69.1.5 | ColumnoperationOverlayTextLeftOffset | read-write | current | Left offset This field shows or sets the left offset in the mosaic cell, after which the overlay placement starts. This value can be a number of pixel or a fra… |
| 1.3.6.1.4.1.35902.1.6.69.1.6 | ColumnoperationOverlayTextRightOffset | read-write | current | Right offset This field shows or sets the right offset in the mosaic cell, before which the overlay placement ends. This value can be a number of pixel or a fr… |
| 1.3.6.1.4.1.35902.1.6.69.1.7 | ColumnoperationOverlayTextTopOffset | read-write | current | Top offset This field shows or sets the top offset in the mosaic cell, after which the overlay placement starts. This value can be a number of pixel or a fract… |
| 1.3.6.1.4.1.35902.1.6.69.1.8 | ColumnoperationOverlayTextBottomOffset | read-write | current | Bottom offset This field shows or sets the bottom offset in the mosaic cell, before which the overlay placement ends. This value can be a number of pixel or a … |
| 1.3.6.1.4.1.35902.1.6.69.1.9 | ColumnoperationOverlayTextText | read-write | current | Text This field shows or sets the text rendered by the operation. The default is to render no text. It's possible to add text or symbols and use %d for the day… |
| 1.3.6.1.4.1.35902.1.6.69.1.10 | ColumnoperationOverlayTextSize | read-write | current | Size This field shows or sets the font pixel size used for rendering. |
| 1.3.6.1.4.1.35902.1.6.69.1.11 | ColumnoperationOverlayTextHorizontalAlignment | read-write | current | Horizontal alignment This field shows or sets the horizontal alignment of the text. |
| 1.3.6.1.4.1.35902.1.6.69.1.12 | ColumnoperationOverlayTextScroll | read-write | current | Scroll This field shows or sets the scrolling speed in pixel per second of the rendered text. Use 0 to disable, negative value to scroll from right to left and… |
| 1.3.6.1.4.1.35902.1.6.69.1.13 | ColumnoperationOverlayTextVerticalAlignment | read-write | current | Vertical alignment This field shows or sets the vertical alignment of the text. |
| 1.3.6.1.4.1.35902.1.6.69.1.14 | ColumnoperationOverlayTextBaselineAlignment | read-write | current | Baseline alignment This field shows or sets the baseline alignment of the text. |
| 1.3.6.1.4.1.35902.1.6.69.1.15 | ColumnoperationOverlayTextForegroundColor | read-write | current | Foreground color This field shows or sets the text foreground color. |
| 1.3.6.1.4.1.35902.1.6.69.1.16 | ColumnoperationOverlayTextBackgroundColor | read-write | current | Background color This field shows or sets the text background color. |
| 1.3.6.1.4.1.35902.1.6.69.1.17 | ColumnoperationOverlayTextBorderColor | read-write | current | Border color This field shows or sets the text border color. |
| 1.3.6.1.4.1.35902.1.6.69.1.18 | ColumnoperationOverlayTextBorderSize | read-write | current | Border size This field shows or sets the border pixel size used for rendering. |
| 1.3.6.1.4.1.35902.1.6.69.1.19 | ColumnoperationOverlayTextShadowColor | read-write | current | Shadow color This field shows or sets the text shadow color. |
| 1.3.6.1.4.1.35902.1.6.69.1.20 | ColumnoperationOverlayTextShadowX | read-write | current | Shadow X This field shows or sets the shadow horizontal offset. |
| 1.3.6.1.4.1.35902.1.6.69.1.21 | ColumnoperationOverlayTextShadowY | read-write | current | Shadow Y This field shows or sets the shadow vertical offset. |
| 1.3.6.1.4.1.35902.1.6.69.1.22 | ColumnoperationOverlayTextBoxColor | read-write | current | Box color This field shows or sets the text box background color. |
| 1.3.6.1.4.1.35902.1.6.69.1.23 | ColumnoperationOverlayTextBoxBorderSize | read-write | current | Box border size This field shows or sets the text box border pixel size used for rendering. |
| 1.3.6.1.4.1.35902.1.6.69.1.24 | ColumnoperationOverlayTextBlink | read-write | current | Blink This field shows or sets the blinking duration/interval (in millisecond) or the rendered text. Leave empty to disable. |
| 1.3.6.1.4.1.35902.1.6.69.1.25 | ColumnoperationOverlayTextTimezone | read-write | current | Time zone This field shows or sets the time zone in which the timecode is evaluated. To disable it, set an empty string. Please pay attention to the fact that … |
| 1.3.6.1.4.1.35902.1.6.69.1.26 | ColumnoperationOverlayTextTimeOffset | read-write | current | Time offset This field shows or sets a fixed time offset to apply in 27 MHz ticks. |
| 1.3.6.1.4.1.35902.1.6.70 | TableoperationDemuxMisTable | not-accessible | current | List of configured mis demux operations |
| 1.3.6.1.4.1.35902.1.6.70.1 | RowoperationDemuxMisEntry | not-accessible | current | Properties for a single configured mis demux operation |
| 1.3.6.1.4.1.35902.1.6.70.1.1 | ColumnoperationDemuxMisOutputIndex | read-write | current | Output node This field references an entry in the node table, which is used to output the selected MIS read from the input node. The output must be a net or lo… |
| 1.3.6.1.4.1.35902.1.6.70.1.2 | ColumnoperationDemuxMisMis | read-write | current | MIS This number specifies a Multiple Input Stream that is looked for in the raw BBFrame input. The entire stream is sent to the output node. |
| 1.3.6.1.4.1.35902.1.6.71 | TableoperationForwardNetTable | not-accessible | current | List of configured forward net operations |
| 1.3.6.1.4.1.35902.1.6.71.1 | RowoperationForwardNetEntry | not-accessible | current | Properties for a single configured forward net operation |
| 1.3.6.1.4.1.35902.1.6.71.1.1 | ColumnoperationForwardNetOutputIndex | read-write | current | Output node This field references an entry in the node table, which receives the content of the input node. The output must be a net or local node. The operati… |
| 1.3.6.1.4.1.35902.1.7 | NodeserverSchedule | |||
| 1.3.6.1.4.1.35902.1.7.1 | TablescheduleTable | not-accessible | current | List of configured schedules |
| 1.3.6.1.4.1.35902.1.7.1.1 | RowscheduleEntry | not-accessible | current | Properties for a single configured schedule |
| 1.3.6.1.4.1.35902.1.7.1.1.1 | ColumnscheduleIndex | not-accessible | current | Schedule index |
| 1.3.6.1.4.1.35902.1.7.1.1.2 | ColumnscheduleStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.7.1.1.3 | ColumnscheduleType | read-create | current | Schedule type |
| 1.3.6.1.4.1.35902.1.7.1.1.4 | ColumnscheduleUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a schedule. |
| 1.3.6.1.4.1.35902.1.7.1.1.5 | ColumnscheduleDepStatus | read-only | current | True if the schedule is currently running. |
| 1.3.6.1.4.1.35902.1.7.1.1.6 | ColumnscheduleLicenseStatus | read-only | current | True if there is a license which enables this schedule |
| 1.3.6.1.4.1.35902.1.7.1.1.7 | ColumnscheduleOpStatus | read-create | current | True if the schedule is currently running |
| 1.3.6.1.4.1.35902.1.7.1.1.8 | ColumnscheduleName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.7.1.1.9 | ColumnscheduleLogs | read-create | current | Timestamp of the last change in the logs file. |
| 1.3.6.1.4.1.35902.1.7.1.1.10 | ColumnscheduleNextRun | read-only | current | Next run This field shows the calendar date of the next running time of this schedule, when available. |
| 1.3.6.1.4.1.35902.1.7.1.1.11 | ColumnscheduleRunOnStartup | read-create | current | Run on startup When enabled, the schedule will run when the server starts up. |
| 1.3.6.1.4.1.35902.1.7.1.1.12 | ColumnscheduleScheduleContext | read-create | current | Schedule context This field shows or sets the schedule environment variables. They can be defined using a whitespace separated list of key=value items. |
| 1.3.6.1.4.1.35902.1.7.1.1.13 | ColumnscheduleLastContext | read-only | current | Last context This field shows the last schedule environment variables defined as a whitespace separated list of key=value items. |
| 1.3.6.1.4.1.35902.1.7.2 | TableschedulePunctualTable | not-accessible | current | List of configured punctual schedules |
| 1.3.6.1.4.1.35902.1.7.2.1 | RowschedulePunctualEntry | not-accessible | current | Properties for a single configured punctual schedule |
| 1.3.6.1.4.1.35902.1.7.2.1.1 | ColumnschedulePunctualDate | read-write | current | Date This field shows or sets the date at which the schedule triggers. |
| 1.3.6.1.4.1.35902.1.7.2.1.2 | ColumnschedulePunctualPeriod | read-write | current | Repeat after This field shows or sets the period of time (in units of a 27 MHz clock) after which the schedule is triggered again. Set to 0 to disable the peri… |
| 1.3.6.1.4.1.35902.1.7.3 | TableschedulePeriodicTable | not-accessible | current | List of configured periodic schedules |
| 1.3.6.1.4.1.35902.1.7.3.1 | RowschedulePeriodicEntry | not-accessible | current | Properties for a single configured periodic schedule |
| 1.3.6.1.4.1.35902.1.7.3.1.1 | ColumnschedulePeriodicTime | read-write | current | Time This field shows or sets the time (from midnight) at which the first schedule of the day is triggered. Additional triggers may occur periodically. |
| 1.3.6.1.4.1.35902.1.7.3.1.2 | ColumnschedulePeriodicTimezone | read-write | current | Time zone This field shows or sets the time zone in which the schedule is evaluated. It is particularly useful if daylight savings time is in operation, and on… |
| 1.3.6.1.4.1.35902.1.7.3.1.3 | ColumnschedulePeriodicPeriod | read-write | current | Repeat after This field shows or sets the period of time (in seconds) between every trigger in the same day. Set to 0 to disable the periodicity. |
| 1.3.6.1.4.1.35902.1.7.3.1.4 | ColumnschedulePeriodicMon | read-write | current | Mondays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.5 | ColumnschedulePeriodicTue | read-write | current | Tuesdays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.6 | ColumnschedulePeriodicWed | read-write | current | Wednesdays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.7 | ColumnschedulePeriodicThu | read-write | current | Thursday Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.8 | ColumnschedulePeriodicFri | read-write | current | Fridays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.9 | ColumnschedulePeriodicSat | read-write | current | Saturdays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.7.3.1.10 | ColumnschedulePeriodicSun | read-write | current | Sundays Disable this to prevent the schedule to run on specified week day. |
| 1.3.6.1.4.1.35902.1.8 | NodeserverJob | |||
| 1.3.6.1.4.1.35902.1.8.1 | TablejobTable | not-accessible | current | List of configured jobs |
| 1.3.6.1.4.1.35902.1.8.1.1 | RowjobEntry | not-accessible | current | Properties for a single configured job |
| 1.3.6.1.4.1.35902.1.8.1.1.1 | ColumnjobIndex | not-accessible | current | Job index |
| 1.3.6.1.4.1.35902.1.8.1.1.2 | ColumnjobStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.8.1.1.3 | ColumnjobType | read-create | current | Job type |
| 1.3.6.1.4.1.35902.1.8.1.1.4 | ColumnjobUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a job. |
| 1.3.6.1.4.1.35902.1.8.1.1.5 | ColumnjobDepStatus | read-only | current | True if the job is currently running. |
| 1.3.6.1.4.1.35902.1.8.1.1.6 | ColumnjobLicenseStatus | read-only | current | True if there is a license which enables this job |
| 1.3.6.1.4.1.35902.1.8.1.1.7 | ColumnjobScheduleIndex | read-create | current | Schedule index This field shows or sets the schedule this job will run under. |
| 1.3.6.1.4.1.35902.1.8.2 | TablejobConfigTable | not-accessible | current | List of configured config jobs |
| 1.3.6.1.4.1.35902.1.8.2.1 | RowjobConfigEntry | not-accessible | current | Properties for a single configured config job |
| 1.3.6.1.4.1.35902.1.8.2.1.1 | ColumnjobConfigOID | read-write | current | Object identifier This field shows or sets the object that the job sets. |
| 1.3.6.1.4.1.35902.1.8.2.1.2 | ColumnjobConfigType | read-write | current | ASN.1 type This field shows or sets the ASN.1 type of the object. |
| 1.3.6.1.4.1.35902.1.8.2.1.3 | ColumnjobConfigValue | read-write | current | |
| 1.3.6.1.4.1.35902.1.8.3 | TablejobExtractTable | not-accessible | current | List of configured extract jobs |
| 1.3.6.1.4.1.35902.1.8.3.1 | RowjobExtractEntry | not-accessible | current | Properties for a single configured extract job |
| 1.3.6.1.4.1.35902.1.8.3.1.1 | ColumnjobExtractInputIndex | read-write | current | Input node This field shows or sets the index of the node that is used as input. |
| 1.3.6.1.4.1.35902.1.8.3.1.2 | ColumnjobExtractTime | read-write | current | Time offset This field shows or sets the 27 MHz timestamp that marks the beginning of the extract. When positive, it is the number of 27 MHz ticks from the beg… |
| 1.3.6.1.4.1.35902.1.8.3.1.3 | ColumnjobExtractDuration | read-write | current | Time duration This field shows or sets the duration of the extract, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.8.3.1.4 | ColumnjobExtractOutputIndex | read-write | current | Output node This field shows or sets the index of the node to which the extract will be written. If the node is a file node, the content will be overwritten. I… |
| 1.3.6.1.4.1.35902.1.8.3.1.5 | ColumnjobExtractFilename | read-write | current | Output file name This field shows or sets the file name which will be used for the output node if it is a directory node. If the name contains the % character,… |
| 1.3.6.1.4.1.35902.1.8.3.1.6 | ColumnjobExtractInputFilename | read-write | current | Input file name This field shows or sets the file name used in the input node if it is a directory node. |
| 1.3.6.1.4.1.35902.1.8.4 | TablejobSnmpTable | not-accessible | current | List of configured snmp jobs |
| 1.3.6.1.4.1.35902.1.8.4.1 | RowjobSnmpEntry | not-accessible | current | Properties for a single configured snmp job |
| 1.3.6.1.4.1.35902.1.8.4.1.1 | ColumnjobSnmpAddress | read-write | current | IP address This field allows the administrator to enter an IPv4 address to which the SNMP request will be sent. |
| 1.3.6.1.4.1.35902.1.8.4.1.2 | ColumnjobSnmpPort | read-write | current | Port This field allows the administrator to enter a port number on which the SNMP request will be sent (usually 161). |
| 1.3.6.1.4.1.35902.1.8.4.1.3 | ColumnjobSnmpCommunity | read-write | current | Community This field allows the administrator to enter a community string to use when sending an SNMP request. |
| 1.3.6.1.4.1.35902.1.8.4.1.4 | ColumnjobSnmpOID | read-write | current | Object identifier This field shows or sets the object that the job sets. |
| 1.3.6.1.4.1.35902.1.8.4.1.5 | ColumnjobSnmpType | read-write | current | ASN.1 type This field shows or sets the ASN.1 type of the object. |
| 1.3.6.1.4.1.35902.1.8.4.1.6 | ColumnjobSnmpValue | read-write | current | New value This field shows or sets the value to which the job sets the object. |
| 1.3.6.1.4.1.35902.1.8.5 | TablejobRemoteTable | not-accessible | current | List of configured remote jobs |
| 1.3.6.1.4.1.35902.1.8.5.1 | RowjobRemoteEntry | not-accessible | current | Properties for a single configured remote job |
| 1.3.6.1.4.1.35902.1.8.5.1.1 | ColumnjobRemoteAddress | read-write | current | IP address This field allows the administrator to enter the IPv4 address of a remote server. |
| 1.3.6.1.4.1.35902.1.8.5.1.2 | ColumnjobRemoteCommunity | read-write | current | Community This field allows the administrator to enter a community string to use log into the remote server. |
| 1.3.6.1.4.1.35902.1.8.5.1.3 | ColumnjobRemoteScheduleIndex | read-write | current | Remote schedule This field shows or sets the schedule index that will be run on the remote server when the job triggers. |
| 1.3.6.1.4.1.35902.1.8.6 | TablejobLocalTable | not-accessible | current | List of configured local jobs |
| 1.3.6.1.4.1.35902.1.8.6.1 | RowjobLocalEntry | not-accessible | current | Properties for a single configured local job |
| 1.3.6.1.4.1.35902.1.8.6.1.1 | ColumnjobLocalScheduleIndex | read-write | current | Local schedule This field shows or sets the schedule index that will be run on the local server when the job triggers. |
| 1.3.6.1.4.1.35902.1.8.7 | TablejobDelayTable | not-accessible | current | List of configured delay jobs |
| 1.3.6.1.4.1.35902.1.8.7.1 | RowjobDelayEntry | not-accessible | current | Properties for a single configured delay job |
| 1.3.6.1.4.1.35902.1.8.7.1.1 | ColumnjobDelayScheduleIndex | read-write | current | Delay schedule This field shows or sets the punctual or periodic schedule index that will be modified with the given delay on the local server when the job tri… |
| 1.3.6.1.4.1.35902.1.8.7.1.2 | ColumnjobDelayDelay | read-write | current | Delay This field shows or sets the delay to apply to the schedule in milliseconds, in addition to the current time. |
| 1.3.6.1.4.1.35902.1.8.8 | TablejobOperationTable | not-accessible | current | List of configured operation jobs |
| 1.3.6.1.4.1.35902.1.8.8.1 | RowjobOperationEntry | not-accessible | current | Properties for a single configured operation job |
| 1.3.6.1.4.1.35902.1.8.8.1.1 | ColumnjobOperationIndex | read-write | current | Operation index This field shows or sets the operation index whose date will be modified with the given delay on the local server when the job triggers. |
| 1.3.6.1.4.1.35902.1.8.8.1.2 | ColumnjobOperationDelay | read-write | current | Delay This field shows or sets the delay to apply to the operation date in milliseconds, in addition to the current time. |
| 1.3.6.1.4.1.35902.1.8.9 | TablejobOverlayTable | not-accessible | current | List of configured overlay jobs |
| 1.3.6.1.4.1.35902.1.8.9.1 | RowjobOverlayEntry | not-accessible | current | Properties for a single configured overlay job |
| 1.3.6.1.4.1.35902.1.8.9.1.1 | ColumnjobOverlayOperationIndex | read-write | current | Overlay index This field shows or sets the overlay operation index whose input offsets will be modified on the local server when the job triggers, in order to … |
| 1.3.6.1.4.1.35902.1.8.9.1.2 | ColumnjobOverlayWidth | read-write | current | Sprite width This field shows or sets the width of the sprite. |
| 1.3.6.1.4.1.35902.1.8.9.1.3 | ColumnjobOverlayHeight | read-write | current | Sprite height This field shows or sets the height of the sprite. |
| 1.3.6.1.4.1.35902.1.9 | NodeserverProcess | |||
| 1.3.6.1.4.1.35902.1.9.1 | TableprocessTable | not-accessible | current | List of configured processes |
| 1.3.6.1.4.1.35902.1.9.1.1 | RowprocessEntry | not-accessible | current | Properties for a single configured process |
| 1.3.6.1.4.1.35902.1.9.1.1.1 | ColumnprocessIndex | not-accessible | current | Process index |
| 1.3.6.1.4.1.35902.1.9.1.1.2 | ColumnprocessStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.9.1.1.3 | ColumnprocessType | read-create | current | Process type |
| 1.3.6.1.4.1.35902.1.9.1.1.4 | ColumnprocessUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a process. |
| 1.3.6.1.4.1.35902.1.9.1.1.5 | ColumnprocessDepStatus | read-only | current | True if all dependencies are ready. |
| 1.3.6.1.4.1.35902.1.9.1.1.6 | ColumnprocessLicenseStatus | read-only | current | True if there is a license which enables this process |
| 1.3.6.1.4.1.35902.1.9.1.1.7 | ColumnprocessRunStatus | read-only | current | Run status This shows the status of the process. |
| 1.3.6.1.4.1.35902.1.9.1.1.8 | ColumnprocessName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.9.1.1.9 | ColumnprocessCreation | read-only | current | Creation date This field shows the creation date of the extract. |
| 1.3.6.1.4.1.35902.1.9.1.1.10 | ColumnprocessModification | read-only | current | Modification date This field shows the last modification date of the extract. |
| 1.3.6.1.4.1.35902.1.9.2 | TableprocessExtractTable | not-accessible | current | List of configured extract processes |
| 1.3.6.1.4.1.35902.1.9.2.1 | RowprocessExtractEntry | not-accessible | current | Properties for a single configured extract process |
| 1.3.6.1.4.1.35902.1.9.2.1.1 | ColumnprocessExtractInputIndex | read-write | current | Input node This field shows or sets the index of the node that is used as input. |
| 1.3.6.1.4.1.35902.1.9.2.1.2 | ColumnprocessExtractTime | read-write | current | Time offset This field shows or sets the 27 MHz timestamp that marks the beginning of the extract. When positive, it is the number of 27 MHz ticks from the beg… |
| 1.3.6.1.4.1.35902.1.9.2.1.3 | ColumnprocessExtractDuration | read-write | current | Time duration This field shows or sets the duration of the extract, in units of a 27 MHz clock. |
| 1.3.6.1.4.1.35902.1.9.2.1.4 | ColumnprocessExtractOutputIndex | read-write | current | Output node This field shows or sets the index of the node to which the extract will be written. If the node is a file node, the content will be overwritten. I… |
| 1.3.6.1.4.1.35902.1.9.2.1.5 | ColumnprocessExtractFilename | read-write | current | Output file name This field shows or sets the file name which will be used for the output node if it is a directory node. If the name contains the % character,… |
| 1.3.6.1.4.1.35902.1.9.2.1.6 | ColumnprocessExtractInputFilename | read-write | current | Input file name This field shows or sets the file name used in the input node if it is a directory node. |
| 1.3.6.1.4.1.35902.1.9.3 | TableprocessUploadTable | not-accessible | current | List of configured upload processes |
| 1.3.6.1.4.1.35902.1.9.3.1 | RowprocessUploadEntry | not-accessible | current | Properties for a single configured upload process |
| 1.3.6.1.4.1.35902.1.9.3.1.1 | ColumnprocessUploadToken | read-write | current | Token This field shows or sets the token that has been used to upload the staging file. If it is set to 0, no input will be used, and the output node will just… |
| 1.3.6.1.4.1.35902.1.9.3.1.2 | ColumnprocessUploadTokenLink | read-write | current | Storage link This field shows or sets the index of the storage link where the staging file was written. |
| 1.3.6.1.4.1.35902.1.9.3.1.3 | ColumnprocessUploadOutputIndex | read-write | current | Output node This field shows or sets the index of the node that is used as output. If it is a directory node, the filename must be set. If it is set to 0, no o… |
| 1.3.6.1.4.1.35902.1.9.3.1.4 | ColumnprocessUploadFilename | read-write | current | File name This field shows or sets the file name which will be used for the output node if it is a directory node. |
| 1.3.6.1.4.1.35902.1.9.4 | TableprocessStructureTable | not-accessible | current | List of configured structure processes |
| 1.3.6.1.4.1.35902.1.9.4.1 | RowprocessStructureEntry | not-accessible | current | Properties for a single configured structure process |
| 1.3.6.1.4.1.35902.1.9.4.1.1 | ColumnprocessStructureToken | read-write | current | Token This field shows or sets the token that has been used to upload the staging file. |
| 1.3.6.1.4.1.35902.1.9.4.1.2 | ColumnprocessStructureOutputIndex | read-write | current | Output node This field shows or sets the index of the node that is used as output. If it is a directory node, the filename must be set. |
| 1.3.6.1.4.1.35902.1.10 | NodeserverLogger | |||
| 1.3.6.1.4.1.35902.1.10.1 | TableloggerTable | not-accessible | current | List of configured loggers |
| 1.3.6.1.4.1.35902.1.10.1.1 | RowloggerEntry | not-accessible | current | Properties for a single configured logger |
| 1.3.6.1.4.1.35902.1.10.1.1.1 | ColumnloggerIndex | not-accessible | current | Logger index |
| 1.3.6.1.4.1.35902.1.10.1.1.2 | ColumnloggerStatus | read-create | current | This object is used to create and delete rows |
| 1.3.6.1.4.1.35902.1.10.1.1.3 | ColumnloggerType | read-create | current | Logger type |
| 1.3.6.1.4.1.35902.1.10.1.1.4 | ColumnloggerUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a logger. |
| 1.3.6.1.4.1.35902.1.10.1.1.5 | ColumnloggerDepStatus | read-only | current | True if all dependencies are ready. |
| 1.3.6.1.4.1.35902.1.10.1.1.6 | ColumnloggerLicenseStatus | read-only | current | True if there is a license which enables this logger |
| 1.3.6.1.4.1.35902.1.10.1.1.7 | ColumnloggerOpStatus | read-only | current | True if the logger is operational |
| 1.3.6.1.4.1.35902.1.10.1.1.8 | ColumnloggerLogs | read-only | current | Timestamp of the last change in the logs file. |
| 1.3.6.1.4.1.35902.1.10.1.1.9 | ColumnloggerLastDown | read-only | current | Last down This field shows the last time the logger went down. |
| 1.3.6.1.4.1.35902.1.10.1.1.10 | ColumnloggerLastUp | read-only | current | Last up This field show the last time the logger went up. |
| 1.3.6.1.4.1.35902.1.10.1.1.11 | ColumnloggerName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.10.1.1.12 | ColumnloggerNodeIndex | read-create | current | Input node This field references an entry in the node table, which is used as an input to the logger. The input must be a net node. The function cannot be oper… |
| 1.3.6.1.4.1.35902.1.10.2 | TableloggerFileCircularTable | not-accessible | current | List of configured circular file loggers |
| 1.3.6.1.4.1.35902.1.10.2.1 | RowloggerFileCircularEntry | not-accessible | current | Properties for a single configured circular file logger |
| 1.3.6.1.4.1.35902.1.10.2.1.1 | ColumnloggerFileCircularLink | read-write | current | Storage link This field references an entry in the storage link table, on which this logger is written to. A circular file logger cannot be operational unless … |
| 1.3.6.1.4.1.35902.1.10.2.1.2 | ColumnloggerFileCircularChunkDuration | read-write | current | Chunk duration This field shows or sets the duration of a logger chunk, in seconds (default: 3600). Chunks can only be removed or added atomically, so the chun… |
| 1.3.6.1.4.1.35902.1.10.2.1.3 | ColumnloggerFileCircularChunks | read-write | current | Number of chunks This field shows or sets the number of chunks which are to be kept at all time. The minimum time retention of a logger is therefore chunks tim… |
| 1.3.6.1.4.1.35902.1.10.2.1.4 | ColumnloggerFileCircularOldestChunk | read-only | current | Oldest chunk This field shows or sets the creation date of the oldest available chunk. |
| 1.3.6.1.4.1.35902.1.10.2.1.5 | ColumnloggerFileCircularPath | read-write | current | Optional path This field shows or sets the access path for the circular file on the storage link. If left empty, the file will be hidden and only usable by the… |
| 1.3.6.1.4.1.35902.1.10.2.1.6 | ColumnloggerFileCircularChunkOffset | read-write | current | Chunk offset This field shows or sets the offset of a stream chunk, in percentage (default: random). On a single storage, chunks should all have different offs… |
| 1.3.6.1.4.1.35902.1.10.3 | TableloggerSyslogTable | not-accessible | current | List of configured syslog loggers |
| 1.3.6.1.4.1.35902.1.10.3.1 | RowloggerSyslogEntry | not-accessible | current | Properties for a single configured syslog logger |
| 1.3.6.1.4.1.35902.1.10.3.1.1 | ColumnloggerSyslogServer | read-write | current | Server address This string shows or sets the address of the remote syslog server. |
| 1.3.6.1.4.1.35902.1.10.3.1.2 | ColumnloggerSyslogPort | read-write | current | Port This field shows or sets the port of the remote syslog server. The standard syslog port is 514. |
| 1.3.6.1.4.1.35902.1.10.3.1.3 | ColumnloggerSyslogTCP | read-write | current | TCP This menu specifies whether to use the TCP syslog protocol. |
| 1.3.6.1.4.1.35902.1.11 | NodeserverVideoDevice | |||
| 1.3.6.1.4.1.35902.1.11.1 | TablevideoDeviceTable | not-accessible | current | List of video devices |
| 1.3.6.1.4.1.35902.1.11.1.1 | RowvideoDeviceEntry | not-accessible | current | Properties for a single video device |
| 1.3.6.1.4.1.35902.1.11.1.1.1 | ColumnvideoDeviceIndex | not-accessible | current | Video device index |
| 1.3.6.1.4.1.35902.1.11.1.1.2 | ColumnvideoDeviceStatus | read-create | current | Video device status |
| 1.3.6.1.4.1.35902.1.11.1.1.3 | ColumnvideoDeviceType | read-create | current | Video device type |
| 1.3.6.1.4.1.35902.1.11.1.1.4 | ColumnvideoDeviceUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a video device. |
| 1.3.6.1.4.1.35902.1.11.1.1.5 | ColumnvideoDeviceDepStatus | read-only | current | True if the video device actually exists |
| 1.3.6.1.4.1.35902.1.11.1.1.6 | ColumnvideoDeviceLicenseStatus | read-only | current | True if there is a license which enables this video device |
| 1.3.6.1.4.1.35902.1.11.1.1.7 | ColumnvideoDeviceDeviceIndex | read-only | current | Device This field references an entry in the server device table, to which this video device is bound to. |
| 1.3.6.1.4.1.35902.1.11.1.1.8 | ColumnvideoDeviceName | read-create | current | Label This string can be assigned freely by the admin. |
| 1.3.6.1.4.1.35902.1.11.2 | TablevideoDeviceIntelQsvTable | not-accessible | current | List of Intel Quick Sync Video devices |
| 1.3.6.1.4.1.35902.1.11.2.1 | RowvideoDeviceIntelQsvEntry | not-accessible | current | Properties for a single Intel Quick Sync Video device |
| 1.3.6.1.4.1.35902.1.11.2.1.1 | ColumnvideoDeviceIntelQsvDescription | read-only | current | Description This field shows the description provided by the device driver. |
| 1.3.6.1.4.1.35902.1.11.2.1.2 | ColumnvideoDeviceIntelQsvRenderUsage | read-only | current | RENDER usage This field shows the percentage of time spent running tasks by the Render Engine. |
| 1.3.6.1.4.1.35902.1.11.2.1.3 | ColumnvideoDeviceIntelQsvVideoUsage | read-only | current | VIDEO usage This field shows the percentage of time spent running tasks by the Multi-Format Codec Engine. |
| 1.3.6.1.4.1.35902.1.11.2.1.4 | ColumnvideoDeviceIntelQsvVideo2Usage | read-only | current | VIDEO2 usage This field shows the percentage of time spent running tasks by the second instance of Multi-Format Codec Engine, if available. |
| 1.3.6.1.4.1.35902.1.11.2.1.5 | ColumnvideoDeviceIntelQsvVideoEUsage | read-only | current | VIDEO_E usage This field shows the percentage of time spent running tasks by the Video Quality Engine. |
| 1.3.6.1.4.1.35902.1.11.2.1.6 | ColumnvideoDeviceIntelQsvGtFrequency | read-only | current | GT frequency This field shows the current average GPU operating frequency, in MHz. |
| 1.3.6.1.4.1.35902.1.11.2.1.7 | ColumnvideoDeviceIntelQsvGtMaxFrequency | read-only | current | GT max frequency This field shows the maximum GPU operating frequency, in MHz. |
| 1.3.6.1.4.1.35902.1.11.3 | TablevideoDeviceNetintQuadraTable | not-accessible | current | List of NETINT Quadra devices |
| 1.3.6.1.4.1.35902.1.11.3.1 | RowvideoDeviceNetintQuadraEntry | not-accessible | current | Properties for a single NETINT Quadra device |
| 1.3.6.1.4.1.35902.1.11.3.1.1 | ColumnvideoDeviceNetintQuadraModel | read-only | current | Model This field shows the model name of the NETINT Quadra device. |
| 1.3.6.1.4.1.35902.1.11.3.1.2 | ColumnvideoDeviceNetintQuadraSerialNumber | read-only | current | Serial number This field shows the serial number of the NETINT Quadra device. |
| 1.3.6.1.4.1.35902.1.11.3.1.3 | ColumnvideoDeviceNetintQuadraFirmwareRevision | read-only | current | Firmware revision This field shows the firmware revision currently running on the NETINT Quadra device. |
| 1.3.6.1.4.1.35902.1.11.3.1.4 | ColumnvideoDeviceNetintQuadraTemperature | read-only | current | Temperature This field shows the device composite temperature in degrees Celsius. Throttling will be activated once the device composite temperature reaches or… |
| 1.3.6.1.4.1.35902.1.11.3.1.5 | ColumnvideoDeviceNetintQuadraMemoryUsage | read-only | current | Memory usage This field shows the memory usage percentage of the device. |
| 1.3.6.1.4.1.35902.1.11.3.1.6 | ColumnvideoDeviceNetintQuadraDecoderLoad | read-only | current | Decoder load This field shows the processing load percentage of the decoder subsystem. |
| 1.3.6.1.4.1.35902.1.11.3.1.7 | ColumnvideoDeviceNetintQuadraEncoderLoad | read-only | current | Encoder load This field shows the processing load percentage of the encoder subsystem. |
| 1.3.6.1.4.1.35902.1.11.3.1.8 | ColumnvideoDeviceNetintQuadraScalerLoad | read-only | current | Scaler load This field shows the processing load percentage of the scaler subsystem. |
| 1.3.6.1.4.1.35902.1.11.3.1.9 | ColumnvideoDeviceNetintQuadraUploaderLoad | read-only | current | Uploader load This field shows the processing load percentage of the uploader subsystem. |
| 1.3.6.1.4.1.35902.1.11.3.1.10 | ColumnvideoDeviceNetintQuadraAiLoad | read-only | current | AI load This field shows the processing load percentage of the AI subsystem. |
| 1.3.6.1.4.1.35902.1.12 | NodeserverVideoAccel | |||
| 1.3.6.1.4.1.35902.1.12.1 | TablevideoAccelTable | not-accessible | current | List of video accelerators |
| 1.3.6.1.4.1.35902.1.12.1.1 | RowvideoAccelEntry | not-accessible | current | Properties for a single video accelerator |
| 1.3.6.1.4.1.35902.1.12.1.1.1 | ColumnvideoAccelIndex | not-accessible | current | Video accelerator index |
| 1.3.6.1.4.1.35902.1.12.1.1.2 | ColumnvideoAccelStatus | read-create | current | Video accelerator status |
| 1.3.6.1.4.1.35902.1.12.1.1.3 | ColumnvideoAccelType | read-create | current | Video accelerator type |
| 1.3.6.1.4.1.35902.1.12.1.1.4 | ColumnvideoAccelUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a video accelerator. |
| 1.3.6.1.4.1.35902.1.12.1.1.5 | ColumnvideoAccelDepStatus | read-only | current | True if the video accelerator actually exists |
| 1.3.6.1.4.1.35902.1.12.1.1.6 | ColumnvideoAccelLicenseStatus | read-only | current | True if there is a license which enables this video accelerator |
| 1.3.6.1.4.1.35902.1.12.1.1.7 | ColumnvideoAccelVideoDeviceIndex | read-create | current | Video device index This field references an entry in the video device table, to which this video accelerator is bound to. |
| 1.3.6.1.4.1.35902.1.12.2 | TablevideoAccelDecodeTable | not-accessible | current | List of video decoders |
| 1.3.6.1.4.1.35902.1.12.2.1 | RowvideoAccelDecodeEntry | not-accessible | current | Properties for a single video decoder |
| 1.3.6.1.4.1.35902.1.12.2.1.1 | ColumnvideoAccelDecodeMpeg2 | read-only | current | MPEG-2 support This field shows whether the video decoder supports the MPEG-2 codec. |
| 1.3.6.1.4.1.35902.1.12.2.1.2 | ColumnvideoAccelDecodeAvc | read-only | current | AVC support This field shows whether the video decoder supports the AVC codec. |
| 1.3.6.1.4.1.35902.1.12.2.1.3 | ColumnvideoAccelDecodeHevc | read-only | current | HEVC support This field shows whether the video decoder supports the HEVC codec. |
| 1.3.6.1.4.1.35902.1.12.3 | TablevideoAccelEncodeTable | not-accessible | current | List of video encoders |
| 1.3.6.1.4.1.35902.1.12.3.1 | RowvideoAccelEncodeEntry | not-accessible | current | Properties for a single video encoder |
| 1.3.6.1.4.1.35902.1.12.3.1.1 | ColumnvideoAccelEncodeMpeg2 | read-only | current | MPEG-2 support This field shows whether the video encoder supports the MPEG-2 codec. |
| 1.3.6.1.4.1.35902.1.12.3.1.2 | ColumnvideoAccelEncodeAvc | read-only | current | AVC support This field shows whether the video encoder supports the AVC codec. |
| 1.3.6.1.4.1.35902.1.12.3.1.3 | ColumnvideoAccelEncodeHevc | read-only | current | HEVC support This field shows whether the video encoder supports the HEVC codec. |
| 1.3.6.1.4.1.35902.1.12.3.1.4 | ColumnvideoAccelEncodeLowPower | read-only | current | Low power This field shows whether the video encoder supports low power encoding, which uses fewer hardware resources than hardware codec + GPU shaders combina… |
| 1.3.6.1.4.1.35902.1.12.4 | TablevideoAccelProcessTable | not-accessible | current | List of video processors |
| 1.3.6.1.4.1.35902.1.12.4.1 | RowvideoAccelProcessEntry | not-accessible | current | Properties for a single video processor |
| 1.3.6.1.4.1.35902.1.12.4.1.1 | ColumnvideoAccelProcessScale | read-only | current | Scaling support This field shows whether the video processor supports scaling. |
| 1.3.6.1.4.1.35902.1.12.4.1.2 | ColumnvideoAccelProcessDeinterlace | read-only | current | Deinterlacing support This field shows whether the video processor supports deinterlacing. |
| 1.3.6.1.4.1.35902.1.13 | NodeserverCiDevice | |||
| 1.3.6.1.4.1.35902.1.13.1 | TableciDeviceTable | not-accessible | current | List of CI devices |
| 1.3.6.1.4.1.35902.1.13.1.1 | RowciDeviceEntry | not-accessible | current | Properties for a single CI device |
| 1.3.6.1.4.1.35902.1.13.1.1.1 | ColumnciDeviceIndex | not-accessible | current | CI device index |
| 1.3.6.1.4.1.35902.1.13.1.1.2 | ColumnciDeviceStatus | read-create | current | CI device status |
| 1.3.6.1.4.1.35902.1.13.1.1.3 | ColumnciDeviceType | read-create | current | CI device type |
| 1.3.6.1.4.1.35902.1.13.1.1.4 | ColumnciDeviceUserStatus | read-create | current | Enabled This menu allows the administrator to temporarily disable a CI device. |
| 1.3.6.1.4.1.35902.1.13.1.1.5 | ColumnciDeviceDepStatus | read-only | current | True if the CI device actually exists |
| 1.3.6.1.4.1.35902.1.13.1.1.6 | ColumnciDeviceLicenseStatus | read-only | current | True if there is a license which enables this CI device |
| 1.3.6.1.4.1.35902.1.13.1.1.7 | ColumnciDeviceDeviceIndex | read-only | current | Device This field references an entry in the server device table, to which this CI device is bound to. |
| 1.3.6.1.4.1.35902.1.13.1.1.8 | ColumnciDeviceName | read-create | current | Label This string can be assigned freely by the admin. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| A52Channels | INTEGER { same(1), mono(2), stereo(3), 5-1(4) } | current | A52 channels |
| A52Profile | INTEGER { main(1), enhanced(2) } | current | A52 profile |
| A52SampleRate | INTEGER { same(1), 48000Hz(2), 44100Hz(3), 32000Hz(4), 24000Hz(5), 22050Hz(6), 16000Hz(7) } | current | A52 sample rate |
| AACChannels | INTEGER { same(1), mono(2), stereo(3), 5-1(4) } | current | AAC channels |
| AACEncapsulation | INTEGER { adts(1), loas(2), loas-explicit(3) } | current | AAC encapsulation |
| AACProfile | INTEGER { lc(1), he(2), hev2(3), ld(4), eld(5) } | current | AAC profile |
| AACSampleRate | INTEGER { same(1), 48000Hz(2), 44100Hz(3), 32000Hz(4), 24000Hz(5), 22050Hz(6), 16000Hz(7) } | current | AAC sample rate |
| AcquireMonoChannel | Unsigned32 (1..16) | current | Mono channel |
| AcquireStereoPair | Unsigned32 (1..8) | current | Stereo pair |
| Alpha | Unsigned32 (0..255) | current | Alpha channel multiplier |
| AsiRxType | INTEGER { none(1), dveo(2) } | current | DVB-ASI RX link type dveo - DVEO card |
| ASNType | INTEGER { boolean(1), integer(2), bit-string(3), octet-string(4), null(5), object-id(6), sequence(16), set(17), counter(65), unsigned(66), timeticks(67), opaque(68), counter64(70), float(72), double(73), integer64(74), unsigned64(75) } | current | ASN.1 type |
| ASNTypeOrAuto | INTEGER { auto(0), boolean(1), integer(2), bit-string(3), octet-string(4), null(5), object-id(6), sequence(16), set(17), counter(65), unsigned(66), timeticks(67), opaque(68), counter64(70), float(72), double(73), integer64(74), unsigned64(75) } | current | ASN.1 type |
| AspectRatio | INTEGER { same(1), 16-9(2), 4-3(3), none(4) } | current | Aspect ratio |
| AVCBPyramid | INTEGER { off(1), hierarchical(2), normal(3) } | current | AVC B pyramid |
| AVCGOP | Unsigned32 (1..1000) | current | GOP size in frames |
| AVCLevel | INTEGER { auto(1), 1-0(10), 1-1(11), 1-2(12), 1-3(13), 2-0(20), 2-1(21), 2-2(22), 3-0(30), 3-1(31), 3-2(32), 4-0(40), 4-1(41), 4-2(42), 5-0(50), 5-1(51) } | current | AVC Level |
| AVCNoiseReduction | Unsigned32 (0..1000) | current | Noise reduction |
| AVCProfile | INTEGER { baseline(1), main(2), high(3), high10(4) } | current | AVC Profile |
| AVCSpeed | INTEGER { auto(1), ultrafast(2), superfast(3), veryfast(4), faster(5), fast(6), medium(7), slow(8), slower(9), veryslow(10), placebo(11) } | current | AVC Speed |
| AVCTuning | INTEGER { none(1), generic(2), film(3), animation(4), grain(5), stillimage(6), psnr(7), ssim(8) } | current | AVC Tuning |
| AVCVbvBuffer | Unsigned32 (0..50000000) | current | VBV buffer in bits |
| BAdapt | INTEGER { none(1), fast(2), full(3) } | current | Adaptive B-frame decision method |
| BaselineAlignment | INTEGER { floating(1), top(2), middle(3), bottom(4), alphabetical(5) } | current | Baseline alignment |
| Bitrate | Unsigned32 (1..2147483647) | current | Bitrate in bits/s |
| BitrateOrZero | Unsigned32 (0..2147483647) | current | Bitrate in bits/s |
| ChromaSubsampling | INTEGER { same(1), 4-2-0(2), 4-2-2(3), 4-4-4(4) } | current | Chroma subsampling |
| CiDeviceType | INTEGER { none(1), generic(2) } | current | CI device type generic - Generic DVB Common Interface device |
| ComponentsLayout | INTEGER { planar(1), semi-planar(2) } | current | Components layout |
| DASHRole | INTEGER { none(1), caption(2), subtitle(3), main(4), alternate(5), supplementary(6), commentary(7), dub(8), description(9), sign(10), metadata(11), enhanced-audio-intelligibility(12), emergency(13), forced-subtitle(14), easyreader(15), karaoke(16) } | current | DASH role |
| Delay | Unsigned32 (0..60000) | current | Delay in millisecond |
| DeviceId | OCTET STRING (SIZE(2)) | current | 16-bit IDs |
| DeviceSubsystem | INTEGER { usb(1), pci(2), mmc(3) } | current | Device sub-system |
| DPIPIDIndex | Unsigned32 (0..65535) | current | DPI PID index (SCTE 104) |
| DvbBandwidth | INTEGER { 8MHz(0), 7MHz(1), 6MHz(2), auto(3) } | current | DVB-T bandwidth settings |
| DvbDelivery | INTEGER { unspecified(0), dvbc-annex-ac(1), dvbc-annex-b(2), dvbt(3), dvbs(5), dvbs2(6), atsc(11), dvbt2(16) } | current | DVB delivery system |
| DvbDiseqc | INTEGER { none(0), S1(1), S2(2), S3(3), S4(4), A(5), B(6) } | current | DVB-S Eutelsat Diseqc settings |
| DVBEncoding | INTEGER { UTF8(1), ISO6937(2), ISO-8859-1(3), ISO-8859-2(4), ISO-8859-3(5), ISO-8859-4(6), ISO-8859-5(7), ISO-8859-6(8), ISO-8859-7(9), ISO-8859-8(10), ISO-8859-9(11), ISO-8859-10(12), ISO-8859-11(13), ISO-8859-13(14), ISO-8859-14(15), ISO-8859-15(16), UCS-2BE(17), EUC-KR(18), GB2312(19) } | current | DVB encoding |
| DvbFEC | INTEGER { none(0), 1-2(1), 2-3(2), 3-4(3), 4-5(4), 5-6(5), 6-7(6), 7-8(7), 8-9(8), auto(9), 3-5(10), 9-10(11) } | current | DVB Forward Error Correction settings |
| DvbGuardInterval | INTEGER { 1-32(0), 1-16(1), 1-8(2), 1-4(3), auto(4) } | current | DVB-T guard interval settings |
| DvbHierarchy | INTEGER { none(0), h1(1), h2(2), h4(3), auto(4) } | current | DVB-T hierarchy settings |
| DvbInversion | INTEGER { off(0), on(1), auto(2) } | current | DVB inversion settings |
| DvbModulation | INTEGER { unspecified(0), qpsk(1), qam-16(2), qam-32(3), qam-64(4), qam-128(5), qam-256(6), qam-auto(7), vsb-8(8), vsb-16(9), psk-8(10), apsk-16(11), apsk-32(12), dqpsk(13) } | current | DVB modulation settings |
| DvbPilot | INTEGER { off(0), on(1), auto(2) } | current | DVB-S2 pilot settings |
| DvbPlsMode | INTEGER { none(0), root(1), gold(2), combo(3) } | current | DVB-S2 PLS mode |
| DvbRolloff | INTEGER { r35(0), r20(1), r25(2), auto(3) } | current | DVB-S2 roll-off factor settings |
| DvbServiceType | INTEGER { same(0), digital-television(1), digital-radio(2), teletext(3), nvod-reference(4), nvod-timeshifted(5), mosaic(6), fm-radio(7), dvb-srm(8), advanced-digital-radio(10), avc-mosaic(11), data-broadcast(12), dvb-mhp(16), hd-digital-television(17), avc-sd-digital-television(22), avc-sd-nvod-timeshifted(23), avc-sd-nvod-reference(24), avc-hd-digital-television(25), avc-hd-nvod-timeshifted(26), avc-hd-nvod-reference(27), avc-stereo-hd-digital-television(28), avc-stereo-hd-nvod-timeshifted(29), avc-stereo-hd-nvod-reference(30), hevc-digital-television(31), hevc-uhd-digital-television(32), vvc-digital-television(33), avs3-digital-television(34) } | current | DVB service type |
| DvbTransmission | INTEGER { 2k(0), 4k(1), 8k(2), auto(3) } | current | DVB-T transmission mode settings |
| DvbType | INTEGER { none(1), satellite(2), cable(3), terrestrial(4), atsc(5), satellite-2g(6), cable-2g(7), terrestrial-2g(8), cable-terrestrial(9) } | current | DVB frontend type |
| DvbVoltage | INTEGER { 0V(0), 13V(1), 18V(2) } | current | DVB-S line voltage settings |
| OCTET STRING (SIZE(0..255)) | current | E-mail address | |
| FECProtectionLevel | INTEGER { level-a(1), level-b(2) } | current | SMPTE 2022-1 FEC protection level |
| FilterType | INTEGER { avfilter(1) } | current | Filter type |
| Fps | INTEGER { same(1), 23-976Hz(2), 24Hz(3), 25Hz(4), 48Hz(5), 50Hz(6), 29-97Hz(7), 59-94Hz(8), 30Hz(9), 60Hz(10), 15Hz(11) } | current | Frame rate |
| FunctionCopyRemoteProtocol | INTEGER { ftp(1), ftp-active(2), ftps(3), hftp(4), fish(5), sftp(6) } | current | Copy remote protocol |
| FunctionType | INTEGER { demux(1), monitor(2), playout(3), record(4), extract(5), hint(6), remux(7), forward(8), transmit-input(9), transmit-output(10), grid-input(11), grid-output(12), grid-image(13), grid-acquire(14), acquire(15), copy-local(16), copy-sprite(17), copy-remote(18), mux(19), mosaic(20), grid-hint(21), monitor-delay(22), monitor-still(23), overlay(24), monitor-r128(25), monitor-failover(26), switch(27), descramble(28), scramble(29), watermark-embed(30), watermark-detect(31), transmit-srt-input(32), transmit-srt-output(33), transmit-rist-input(34), transmit-rist-output(35), transmit-fec-input(36), transmit-fec-output(37), crop(38), package(39), grid-filter(40), transmit-sps-input(41), transmit-sps-output(42), grid-play(43), copy-subtitles(44), ts-filter(45), transmit-rtp-output(46), grid-input-audio(47), grid-output-audio(48), mis-demux(49), forward-net(50) } | current | Function type |
| FunctionWatermarkDetectConfidence | Unsigned32 (0..100) | current | Watermark confidence |
| GPIODirection | INTEGER { none(1), input(2), output(3) } | current | GPIO direction |
| GPIOType | INTEGER { none(1) } | current | GPIO type |
| HEVCBitdepth | INTEGER { same(0), 8bit(8), 10bit(10), 12bit(12) } | current | Bit depth |
| HEVCBPyramid | INTEGER { off(1), normal(2) } | current | HEVC B pyramid |
| HEVCGOP | Unsigned32 (1..1000) | current | GOP size in frames |
| HEVCLevel | INTEGER { auto(1), 1-0(10), 2-0(20), 2-1(21), 3-0(30), 3-1(31), 4-0(40), 4-1(41), 5-0(50), 5-1(51), 5-2(52), 6-0(60), 6-1(61), 6-2(62) } | current | HEVC Level |
| HEVCNoiseReduction | Unsigned32 (0..1000) | current | Noise reduction |
| HEVCProfile | INTEGER { main(1), main10(2), mainstillpicture(3), main444-8(4), main422-10(5), main444-10(6), main12(7), main422-12(8), main444-12(9) } | current | HEVC Profile |
| HEVCSpeed | INTEGER { ultrafast(2), superfast(3), veryfast(4), faster(5), fast(6), medium(7), slow(8), slower(9), veryslow(10), placebo(11) } | current | HEVC Speed |
| HEVCTier | INTEGER { main(1), high(2) } | current | HEVC Tier |
| HEVCTuning | INTEGER { none(1), generic(2), psnr(3), ssim(4), grain(5) } | current | HEVC Tuning |
| HEVCVbvBuffer | Unsigned32 (0..50000000) | current | VBV buffer in bits |
| HintDirection | INTEGER { none(1), beginning(2), end(3) } | current | Hint direction |
| HorizontalAlignment | INTEGER { left(1), center(2), right(3) } | current | Horizontal alignment |
| Host | OCTET STRING (SIZE(0..255)) | current | Host name or IPv4 address |
| HostAndOptionalPort | OCTET STRING (SIZE(0..255)) | current | Host and optional port number |
| HostAndPort | OCTET STRING (SIZE(0..255)) | current | Host and port number |
| HttpAuthenticationMethod | INTEGER { any(1), basic(2), digest(3) } | current | HTTP authentication method any - Probe for most secure authentication available basic - HTTP Basic authentication digest - HTTP Digest authentication |
| IcecastContentType | INTEGER { auto(1), mp3(2), aac(3), mp2(4) } | current | Icecast content type |
| ISO31663Country | OCTET STRING (SIZE(0..3)) | current | ISO-3166-3 country |
| ISO639Language | OCTET STRING (SIZE(0..3)) | current | ISO-639 language |
| JobType | INTEGER { config(1), extract(2), snmp(3), remote(4), local(5), delay(6), operation(7), overlay(8) } | current | Job type |
| LicenseClientFeatureType | INTEGER { basic(1), proxy(15), sprite(22), points(23), remux-file(24), transcode-basic(25), transcode-sd(26), transcode-hd(27), remote(28), transcode-uhd(29), subtitles(32) } | current | License feature type |
| LicenseClientType | INTEGER { regular(1) } | current | License client type |
| LinkNetBondMode | INTEGER { balance-rr(0), active-backup(1), balance-xor(2), broadcast(3), lacp(4), balance-tlb(5), balance-alb(6), none(99) } | current | Network interface bonding mode |
| LinkStorageType | INTEGER { dongle(1), local(2), nfs(3), cifs(4), ram(5), plan9(6), virtiofs(7) } | current | Storage type |
| LoggerType | INTEGER { circular-file(1), syslog(2) } | current | Logger type |
| LongDelay | Unsigned32 (0..86400000) | current | Delay in millisecond |
| LongDisplayString | OCTET STRING (SIZE(0..2048)) | current | Long string |
| MediaSubtitlesLayout | INTEGER { none(1), partial(2), full(3) } | current | Subtitles layout none - no layout partial - best compatibility full - full layout |
| MetadataType | INTEGER { id3v2(1) } | current | Metadata type |
| Mis | Unsigned32 (0..255) | current | Multiple Input Stream |
| MonitorFreezeMode | INTEGER { video(1), video-audio(2) } | current | Monitor freeze mode |
| MonitorStatus | INTEGER { input(1), fallback(2) } | current | Monitor status |
| MonitorStillAlgo | INTEGER { hash(1), diff(2) } | current | Monitor still algorithm |
| MonitorType | INTEGER { service(1), video(2), audio(3), subtitles(4) } | current | Monitor type |
| MosaicLabelVerticalAlignment | INTEGER { top(1), bottom(2) } | current | Vertical alignment |
| MP2Channels | INTEGER { same(1), mono(2), stereo(3), joint-stereo(4), dual-mono(5) } | current | MP2 channels |
| MP2SampleRate | INTEGER { same(1), 48000Hz(2), 44100Hz(3), 32000Hz(4), 24000Hz(5), 22050Hz(6), 16000Hz(7) } | current | MP2 sample rate |
| MP3Channels | INTEGER { same(1), mono(2), stereo(3), joint-stereo(4) } | current | MP3 channels |
| MP3SampleRate | INTEGER { same(1), 48000Hz(2), 44100Hz(3), 32000Hz(4), 24000Hz(5), 22050Hz(6), 16000Hz(7) } | current | MP3 sample rate |
| Mpeg2GOP | Unsigned32 (1..1000) | current | GOP size in frames |
| Mpeg2Level | INTEGER { auto(0), high-progressive(2), high(4), high-1440(6), main(8), low(10) } | current | Mpeg2 Level |
| Mpeg2NoiseReduction | Unsigned32 (0..1000) | current | Noise reduction |
| Mpeg2Profile | INTEGER { simple(1), main(2), 4-2-2(3), high(4) } | current | MPEG-2 Profile |
| Mpeg2Speed | INTEGER { auto(1), ultrafast(2), superfast(3), veryfast(4), faster(5), fast(6), medium(7), slow(8), slower(9), veryslow(10), placebo(11) } | current | Mpeg2 Speed |
| Mpeg2Tuning | INTEGER { none(1), generic(2), film(3), animation(4), grain(5), stillimage(6), psnr(7), ssim(8) } | current | Mpeg2 Tuning |
| Mpeg2VbvBuffer | Unsigned32 (0..9781248) | current | VBV buffer in bits |
| MuxMode | INTEGER { cbr(1), iptv-capped-vbr(2), iptv-cbr(3) } | current | Mux mode |
| NetPhysLink | INTEGER { autoneg(1), base10half(2), base10full(3), base100half(4), base100full(5), base1000half(6), base1000full(7), base10000full(8) } | current | Network interface link settings |
| NetType | INTEGER { unassigned(1), dhcp(2), static(3), loopback(4), access-point(5) } | current | Network interface mode |
| NetworkID | Integer32 (0..65535) | current | Network ID (ETSI TS 101 162) |
| NodeDirectoryOrder | INTEGER { oldest(1), newest(2), smallest(3), biggest(4), alphabetical(5), list(6), output-only(7), no-processing(8) } | current | Processing order of files in a directory |
| NodeESType | INTEGER { none(1), video(2), audio(3), subtitle(4), scte35(5) } | current | Node ES type |
| NodeType | INTEGER { net(1), dvb(2), file(3), circular-file(4), directory(5), asi-rx(6), rtsp(7), jpeg(8), video(9), audio(10), video-rx(11), extract(12), rtmp(13), icecast(14), mpeg-audio(15), png(16), hls-rx(17), srt(18), package-origin(19), es(20), video-tx(21), amazon-s3(22), http(23), subtitle(24), pcm(25), pointer(26), local(27) } | current | Node type |
| NodeVideoRxBitDepth | INTEGER { 8bit(8), 10bit(10) } | current | Input bit depth of a video RX link |
| NodeVideoRxConnection | INTEGER { sdi(1), hdmi(2), optical-sdi(3), component(4), composite(5), s-video(6) } | current | Input connection of a video RX link |
| NodeVideoRxConnectionAudio | INTEGER { embedded(1), aesebu(2), analog(3), analog-xlr(4), analog-rca(5), microphone(6), headphones(7) } | current | Audio connection of a video RX link |
| NodeVideoRxMode | INTEGER { auto(1), ntsc(2), ntsc2398(3), pal(4), ntscp(5), palp(6), 1080p2398(7), 1080p24(8), 1080p25(9), 1080p2997(10), 1080p30(11), 1080i50(12), 1080i5994(13), 1080i6000(14), 1080p50(15), 1080p5994(16), 1080p6000(17), 720p50(18), 720p5994(19), 720p60(20), 2k2398(21), 2k24(22), 2k25(23), 2160p2398(24), 2160p24(25), 2160p25(26), 2160p2997(27), 2160p30(28), 2160p50(29), 2160p5994(30), 2160p60(31) } | current | Input mode of a video RX link |
| NodeVideoTxBitDepth | INTEGER { 8bit(8), 10bit(10) } | current | Input bit depth of a video TX link |
| NodeVideoTxConnection | INTEGER { sdi(1), hdmi(2), optical-sdi(3), component(4), composite(5), s-video(6) } | current | Input connection of a video TX link |
| NodeVideoTxConnectionAudio | INTEGER { embedded(1), aesebu(2), analog(3), analog-xlr(4), analog-rca(5), microphone(6), headphones(7) } | current | Audio connection of a video TX link |
| NodeVideoTxMode | INTEGER { auto(1), ntsc(2), ntsc2398(3), pal(4), ntscp(5), palp(6), 1080p2398(7), 1080p24(8), 1080p25(9), 1080p2997(10), 1080p30(11), 1080i50(12), 1080i5994(13), 1080i6000(14), 1080p50(15), 1080p5994(16), 1080p6000(17), 720p50(18), 720p5994(19), 720p60(20), 2k2398(21), 2k24(22), 2k25(23), 2160p2398(24), 2160p24(25), 2160p25(26), 2160p2997(27), 2160p30(28), 2160p50(29), 2160p5994(30), 2160p60(31) } | current | Input mode of a video TX link |
| OperationPackageMediaFormat | INTEGER { mpeg-ts(1), fmp4(2), packed-audio(3), auto(4) } | current | Package media format |
| OperationPackageMediaHlsEncryptionMethod | INTEGER { none(1), aes-128(2), sample-aes(3) } | current | HLS encryption method |
| OperationPackageMediaHlsHDCPLevel | INTEGER { none(1), type-0(2), type-1(3) } | current | HLS HDCP level |
| OperationPackageMediaHlsRenditionType | INTEGER { none(1), audio(2), video(3), subtitles(4) } | current | HLS rendition type |
| OperationTranscodeAVCMode | INTEGER { capped-vbr(1), cbr(2), vbr(3) } | current | AVC bitrate mode |
| OperationTranscodeHEVCMode | INTEGER { capped-vbr(1), cbr(2), vbr(3) } | current | HEVC bitrate mode |
| OperationTranscodeMpeg2Mode | INTEGER { capped-vbr(1) } | current | MPEG-2 bitrate mode |
| OperationType | INTEGER { demux(1), monitor-pid(2), monitor-type(3), playout-file(4), playout-circular-file(5), monitor-sid(6), playout-directory(7), hint(8), transcode-avc(9), transcode-mp2(10), transcode-aac(11), transmit-input(12), transmit-output(13), transcode-a52(14), grid-input(15), grid-acquire-mono(16), grid-acquire-stereo(17), acquire-mono(18), acquire-stereo(19), mux-input(20), remap-pid(21), remap-sid(22), mosaic(23), hint-scte35(24), transcode-mpeg2(25), extract(26), encode-scte35(27), monitor-delay(28), transcode-mp3(29), monitor-structure(30), acquire-a52(31), grid-acquire-a52(32), acquire-op47(33), acquire-scte104(34), hint-scte104(35), overlay(36), switch(37), transcode-hevc(38), overlay-timecode(39), transmit-srt-input(40), transmit-srt-output(41), transmit-rist-input(42), transmit-rist-output(43), mosaic-chart-net(44), package-media(45), watermark-embed(46), grid-filter-input(47), grid-filter-output(48), map-pid(49), transmit-sps-input(50), transmit-sps-output(51), inject-dvbsub(52), grid-play-mono(53), grid-play-stereo(54), convert-scte35(55), mux-service(56), mux-virtual-es(57), transcode-dvbsub(58), ts-filter(59), transmit-rtp-output(60), decode-subtitle(61), encode-metadata(62), transcode-opus(63), package-output(64), hint-metadata(65), grid-play-op47(66), monitor-failover(67), overlay-text(68), mis-demux(69), monitor-function(70), forward-net(71) } | current | Operation type |
| OpusApplication | INTEGER { audio(1), voip(2), lowdelay(3) } | current | Opus application type |
| OpusBitrateMode | INTEGER { capped-vbr(1), cbr(2) } | current | Opus bitrate mode |
| OpusChannels | INTEGER { same(1), mono(2), stereo(3), 5-1(4) } | current | Opus channels |
| OpusFrameDuration | INTEGER { 2-5ms(1), 5ms(2), 10ms(3), 20ms(4), 40ms(5), 60ms(6), 80ms(7), 100ms(8), 120ms(9) } | current | Opus frame duration |
| OpusSampleRate | INTEGER { same(1), 48000Hz(2), 24000Hz(3), 16000Hz(4), 12000Hz(5), 8000Hz(6) } | current | Opus sample rate |
| PackageOutputLimit | INTEGER { media-segments(1), media-playlists(2), multivariant-playlist(3) } | current | Package output restrictions |
| PackageScte35Asset | INTEGER { none(1), upid(2) } | current | Package SCTE-35 asset attribute |
| PackageTimingMode | INTEGER { wallclock(1), pts-realtime(2) } | current | Package time synchronization method |
| Password | OCTET STRING (SIZE(0..255)) | current | Password string |
| PcmChannels | Unsigned32 (1..64) | current | PCM channels |
| PcmSampleRate | INTEGER { 16000Hz(16000), 22050Hz(22050), 24000Hz(24000), 32000Hz(32000), 44100Hz(44100), 48000Hz(48000), 96000Hz(96000) } | current | PCM sample rate |
| PcmSampleSize | INTEGER { 8-bit(8), 12-bit(12), 16-bit(16), 20-bit(20), 24-bit(24) } | current | PCM sample size |
| Percentage | Unsigned32 (0..100) | current | Percentage |
| PID | Integer32 (1..8192) | current | PID (ISO/IEC 13818-1) |
| PIDOrZero | Integer32 (0..8192) | current | PID (ISO/IEC 13818-1) |
| PIDType | INTEGER { none(1), video(2), audio(3), subtitles(4) } | current | PID type |
| ProcessRunStatus | INTEGER { notrunning(1), running(2), finished(3), error(4) } | current | Process status |
| ProcessType | INTEGER { extract(1), upload(2), structure(3) } | current | Process type |
| RelCounter64 | Counter64 | current | Signed 64-bit integer using 2-complement |
| RowIndex | Integer32 (1..65535) | current | Table row index |
| RowIndexOrZero | Integer32 (0..65535) | current | Table row index, or zero if no row applies |
| ScheduleContext | OCTET STRING (SIZE(0..255)) | current | Schedule environment variables. |
| ScheduleType | INTEGER { punctual(1), periodic(2), task(3) } | current | Schedule type |
| ScramblingType | INTEGER { none(1), biss(2) } | current | Scrambling type |
| Scte104Event | INTEGER { splice-insert(1), null(2), time-signal(3), program(4), program-early-term(5), program-breakaway(6), program-resumption(7), program-runover-planned(8), program-runover-unplanned(9), program-overlap(10), program-blackout-override(11), program-start-in-progress(12), chapter(13), break(14), provider-ad(15), distributor-ad(16), provider-placement-opportunity(17), distributor-placement-opportunity(18), unscheduled-event(19), network(20), ad-server-call(21) } | current | SCTE-104 event |
| Scte35Event | INTEGER { splice-insert(1), null(2), time-signal(3), program(4), program-early-term(5), program-breakaway(6), program-resumption(7), program-runover-planned(8), program-runover-unplanned(9), program-overlap(10), program-blackout-override(11), program-start-in-progress(12), chapter(13), break(14), provider-ad(15), distributor-ad(16), provider-placement-opportunity(17), distributor-placement-opportunity(18), unscheduled-event(19), network(20), ad-server-call(21) } | current | SCTE-35 event |
| ServiceID | Integer32 (1..65535) | current | Service ID (ETSI EN 300 468) |
| ServiceIDOrZero | Integer32 (0..65535) | current | Service ID (ETSI EN 300 468) or zero |
| SlaveType | INTEGER { full(1), config(2) } | current | Slave type |
| SrtConnectionMode | INTEGER { caller(1), listener(2), rendezvous(3) } | current | Connection mode |
| SrtEncryptionType | INTEGER { none(0), aes-128(16), aes-192(24), aes-256(32) } | current | Encryption type |
| SubtitlesFormat | INTEGER { stl(1), srt(2), webvtt(3), ttml(4) } | current | Subtitles format stl - EBU STL srt - SubRip Text webvtt - W3C Web Video Text Tracks ttml - W3C Timed Text Markup Language |
| SystemApplyStatus | INTEGER { none(1), inprogress(2), done(3), fail(4) } | current | Status of the last apply command none - Nothing's happened inprogress - The command is being executed done - The command was done fail - The command failed |
| SystemCommand | INTEGER { none(1), sync(2), unplug(3), restart(4), reboot(5), shutdown(6), apply(7), cleanup(8), reset-health(9), upgrade-video-rx(10), persistent-net-links(11), reset-net-links(12), fast-reboot(13), license-reload(14), upgrade-netint(15) } | current | Commands to the server daemon none - Nothing's happening sync - Force writing configuration files to the key unplug - Notify system of the imminent removal of the license key restart - Restart all processes reboot - Reb… |
| TeletextMagazine | Unsigned32 (0..8) | current | Teletext magazine (8 == 0) |
| TeletextPage | OCTET STRING (SIZE(0..2)) | current | Teletext page |
| TeletextType | INTEGER { initial(1), subtitle(2), additional-info(3), programme-schedule(4), subtitle-hearing-impaired(5) } | current | Teletext type |
| Temperature | Unsigned32 | current | Temperature in degrees Celsius |
| Timestamp | Unsigned32 | current | Timestamp in seconds since UNIX epoch (1970-01-01) |
| Timestamp27 | Counter64 | current | Timestamp in 27 MHz ticks since UNIX epoch (1970-01-01) |
| Token | Unsigned32 (0..2147483647) | current | Use-once number to download or upload files via an insecure connection |
| ToneMappingMethod | INTEGER { none(1), reinhard(2), hable(3), mobius(4) } | current | Tone mapping method |
| TransportStreamID | Integer32 (1..65535) | current | Transport Stream ID (ISO/IEC 13818-1) |
| TransportStreamIDOrMinusOne | Integer32 (-1..65535) | current | Transport Stream ID (ISO/IEC 13818-1) or minus one |
| TrapType | INTEGER { trapv2(1), inform(2) } | current | SNMP trap type |
| TSConformance | INTEGER { none(1), auto(2), iso(3), dvb-no-tables(4), dvb(5), atsc(6), isdb(7) } | current | TS conformance |
| UserType | INTEGER { readonly(1), readwrite(2), readprocess(3) } | current | User type |
| VerticalAlignment | INTEGER { top(1), middle(2), bottom(3) } | current | Vertical alignment |
| VideoAccelType | INTEGER { decode(1), encode(2), process(3) } | current | Video accelerator type |
| VideoDeviceType | INTEGER { none(1), intel-qsv(2), netint-quadra(3) } | current | Video device type intel-qsv - Intel Quick Sync Video device netint-quadra - NETINT Quadra device |
| VideoRxType | INTEGER { none(1), decklink(2) } | current | Video RX link type decklink - Blackmagic Decklink card |
| VideoTxType | INTEGER { none(1), decklink(2) } | current | Video TX link type decklink - Blackmagic Decklink card |