ECLAPBEXT-MIB
80 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434 | Nodeeicon | |||
| 1.3.6.1.4.1.434.2 | Nodemanagement | |||
| 1.3.6.1.4.1.434.2.2 | Nodemibv2 | |||
| 1.3.6.1.4.1.434.2.2.4 | Nodemodule | |||
| 1.3.6.1.4.1.434.2.2.4.1 | Nodelapbext | |||
| 1.3.6.1.4.1.434.2.2.4.1.1 | TablelapbCountersTable | not-accessible | mandatory | Runtime counters table, one row per port |
| 1.3.6.1.4.1.434.2.2.4.1.1.1 | RowlapbCountEntry | not-accessible | mandatory | The set of counters for one port. Can be reset to 0. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.1 | ColumnlapbCountPortRef | read-only | mandatory | The port number, the same as lapbParmPortRef from the lapbParmTable. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.2 | ColumnlapbCountRetransmis | read-only | mandatory | The number of times a frame has been retransmitted |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.3 | ColumnlapbCountSABMTxs | read-only | mandatory | The number of Set Asynchronous Balanced Mode frames sent |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.4 | ColumnlapbCountSABMRxs | read-only | mandatory | The number of Set Asynchronous Balanced Mode frames received |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.5 | ColumnlapbCountDISCTxs | read-only | mandatory | The number of Disconnect frames sent |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.6 | ColumnlapbCountDISCRxs | read-only | mandatory | The number of Disconnect frames received |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.7 | ColumnlapbCountDMsTxs | read-only | mandatory | The number of Disconnected Mode frames sent |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.8 | ColumnlapbCountDMsRxs | read-only | mandatory | The number of Disconnected Mode frames received |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.9 | ColumnlapbCountRNRsTxs | read-only | mandatory | The number of Receiver Not Ready frames sent |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.10 | ColumnlapbCountRNRsRxs | read-only | mandatory | The number of Receiver Not Ready frames received |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.11 | ColumnlapbCountUATxs | read-only | mandatory | The number of Unnumbered Acknowledgement frames transmitted. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.12 | ColumnlapbCountUARxs | read-only | mandatory | The number of Unnumbered Acknowledgement frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.13 | ColumnlapbCountRRTxs | read-only | mandatory | The number of Receiver Ready frames transmitted. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.14 | ColumnlapbCountRRRxs | read-only | mandatory | The number of Receiver Ready frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.15 | ColumnlapbCountFRMRTxs | read-only | mandatory | The number of Frame Reject frames sent. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.16 | ColumnlapbCountFRMRRxs | read-only | mandatory | The number of Frame Reject frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.17 | ColumnlapbCountBadCRCTxs | read-only | mandatory | The number of frames sent with bad CRC. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.18 | ColumnlapbCountBadCRCRxs | read-only | mandatory | The number of frames received with bad CRC. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.19 | ColumnlapbCountAbortTxs | read-only | mandatory | The number of frames sent with Abort indication. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.20 | ColumnlapbCountAbortRxs | read-only | mandatory | The number of frames received with Abort indication. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.21 | ColumnlapbCountBadTypeTxs | read-only | mandatory | The number of Unknown frames sent. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.22 | ColumnlapbCountBadTypeRxs | read-only | mandatory | The number of Unknown frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.23 | ColumnlapbCountInfoFrameTxs | read-only | mandatory | The number of Information frames sent. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.24 | ColumnlapbCountInfoFrameRxs | read-only | mandatory | The number of Information frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.25 | ColumnlapbCountUnderrun | read-only | mandatory | The number of times that more frames have been transmitted than the receiver can handle. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.26 | ColumnlapbCountOverrun | read-only | mandatory | The number of times that the EiconCard could not handle incoming frames. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.27 | ColumnlapbCountXIDTxs | read-only | mandatory | The number of Exchange Station Identification frames sent. |
| 1.3.6.1.4.1.434.2.2.4.1.1.1.28 | ColumnlapbCountXIDRxs | read-only | mandatory | The number of Exchange Station Identification frames received. |
| 1.3.6.1.4.1.434.2.2.4.1.2 | TablelapbBandwidthTable | not-accessible | mandatory | The table of configurable and informational parameters with respect to the bandwidth traps for lapb interfaces |
| 1.3.6.1.4.1.434.2.2.4.1.2.1 | RowlapbBandwidthEntry | not-accessible | mandatory | The set of configurable and informational parameters to support the bandwidth traps for each lapb interface |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.1 | ColumnlapbBandwidthIndex | read-only | mandatory | The identifier of the EiconPort assigned by the agent. |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.2 | ColumnlapbBandwidthHigh | read-write | mandatory | The higher configurable threshold for the lapbTrapBandwidthShortage. If the percentage of bandwidth being used exceeds this amount over a configurable number o… |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.3 | ColumnlapbBandwidthLow | read-write | mandatory | The lower configurable threshold for the lapbTrapBandwidthClear. If the percentage of bandwidth being used drops below this amount, subsequent to a lapbTrapBan… |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.4 | ColumnlapbBandwidthSecs | read-write | mandatory | The number of seconds over which the bandwidth is calculated. |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.5 | ColumnlapbBandwidthNumPeriods | read-write | mandatory | The number of consecutive periods, each of length lapbBandwidthSecs seconds, that the condition must be present for before the lapbBandwidthShortage trap is se… |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.6 | ColumnlapbBandwidthTrapState | read-write | mandatory | This variable indicates whether the agent should generate the lapbTrapBandwidthShortage and lapbTrapBandwidthClear traps if the relevant conditions arise. Set … |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.7 | ColumnlapbBandwidthTrapStatus | read-only | mandatory | The status of the bandwidth traps. This value should be polled to determine whether or not the bandwidth shortage condition is present and a trap has been sent. |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.8 | ColumnlapbBandwidthRxInUse | read-only | mandatory | The percentage of bandwidth that is currently in use receiving incoming traffic. |
| 1.3.6.1.4.1.434.2.2.4.1.2.1.9 | ColumnlapbBandwidthTxInUse | read-only | mandatory | The percentage of bandwidth that is currently in use transmitting outgoing traffic. |
| 1.3.6.1.4.1.434.2.2.4.1.3 | TablelapbOperTable | not-accessible | mandatory | This table contains configuration information about interface parameters currently set in the interface. Many of these objects have corresponding objects in th… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1 | RowlapbOperEntry | not-accessible | mandatory | Currently set parameter values for a specific LAPB. |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.1 | ColumnlapbOperIndex | read-only | mandatory | The ifIndex value for the LAPB interface. |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.2 | ColumnlapbOperStationType | read-only | mandatory | Identifies the current operating station type of this interface. A value of dxe (3) indicates XID negotiation has not yet taken place. |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.3 | ColumnlapbOperControlField | read-only | mandatory | The current operating size of the sequence numbers used to number frames. |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.4 | ColumnlapbOperTransmitN1FrameSize | read-only | mandatory | The current operating N1 frame size used for the maximum number of bits in a frame this DTE can transmit. This excludes flags and 0 bits inserted for transpare… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.5 | ColumnlapbOperReceiveN1FrameSize | read-only | mandatory | The current operating N1 frame size used for the maximum number of bits in a frame the DCE/remote DTE can transmit. This excludes flags and 0 bits inserted for… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.6 | ColumnlapbOperTransmitKWindowSize | read-only | mandatory | The current PDU window size this Interface uses to transmit. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE … |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.7 | ColumnlapbOperReceiveKWindowSize | read-only | mandatory | The current receive PDU window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.8 | ColumnlapbOperN2RxmitCount | read-only | mandatory | The current N2 retry counter used for this interface. This specifies the number of times a PDU will be resent after the T1 timer expires without an acknowledge… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.9 | ColumnlapbOperT1AckTimer | read-only | mandatory | The current T1 timer for this interface. This specifies the maximum time in Milliseconds to wait for acknowledgment of a PDU. |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.10 | ColumnlapbOperT2AckDelayTimer | read-only | mandatory | The current T2 timer for this interface. This specifies the maximum time in Milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value … |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.11 | ColumnlapbOperT3DisconnectTimer | read-only | mandatory | The current T3 timer for this interface. This specifies the time in Milliseconds to wait before considering the link disconnected. A value of zero indicates th… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.12 | ColumnlapbOperT4IdleTimer | read-write | mandatory | The current T4 timer for this interface. This specifies the maximum time in Milliseconds to allow without frames being exchanged on the data link. A value of 2… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.13 | ColumnlapbOperPortId | read-only | mandatory | This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical device or interface used to send and r… |
| 1.3.6.1.4.1.434.2.2.4.1.3.1.14 | ColumnlapbOperProtocolVersionId | read-only | mandatory | This object identifies the version of the lapb protocol implemented by this interface. |
| 1.3.6.1.4.1.434.2.2.4.1.4 | TablelapbFlowTable | not-accessible | mandatory | This table defines the objects recorded by LAPB to provide information about the traffic flow through the interface. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1 | RowlapbFlowEntry | not-accessible | mandatory | The information regarding the effects of flow controls in LAPB. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.1 | ColumnlapbFlowIfIndex | read-only | mandatory | The ifIndex value for the LAPB Interface. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.2 | ColumnlapbFlowStateChanges | read-only | mandatory | The number of LAPB State Changes, including resets. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.3 | ColumnlapbFlowChangeReason | read-only | mandatory | The reason for the most recent incrementing of lapbFlowStateChanges. A DM or DISC frame generated to initiate link set-up does not alter this object. When the … |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.4 | ColumnlapbFlowCurrentMode | read-only | mandatory | The current condition of the conversation. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.5 | ColumnlapbFlowBusyDefers | read-only | mandatory | The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR … |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.6 | ColumnlapbFlowRejOutPkts | read-only | mandatory | The number of REJ or SREJ frames sent by this station. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.7 | ColumnlapbFlowRejInPkts | read-only | mandatory | The number of REJ or SREJ frames received by this station. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.8 | ColumnlapbFlowT1Timeouts | read-only | mandatory | The number of times a re-transmission was effected by the T1 Timer expiring. |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.9 | ColumnlapbFlowFrmrSent | read-only | mandatory | The Information Field of the FRMR most recently sent. If no FRMR has been sent (the normal case) or the information isn't available, this will be an OCTET STRI… |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.10 | ColumnlapbFlowFrmrReceived | read-only | mandatory | The Information Field of the FRMR most recently received. If no FRMR has been received (the normal case) or the information isn't available, this will be an OC… |
| 1.3.6.1.4.1.434.2.2.4.1.4.1.11 | ColumnlapbFlowXidReceived | read-only | mandatory | The Information Field of the XID frame most recently received. If no XID frame has been received, this will be an OCTET STRING of zero length. |
| 1.3.6.1.4.1.434.411 | NodelapbTrapBandwidthShortage | This trap indicates that the amount of bandwidth used on the specified port has risen above lapbBandwidthHigh percent over lapbBandwidthNumPeriods of lapbBandw… | ||
| 1.3.6.1.4.1.434.412 | NodelapbTrapBandwidthClear | This trap indicates that the condition causing a previous lapbTrapBandwidthShortage no longer applies; in particular that the bandwidth being used on the speci… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BandwidthStatus | INTEGER { normal(1), tx-usage-high(2), rx-usage-high(3), tx-and-rx-usage-high(4), undefined(5) } | ||
| IfIndexType | INTEGER (1..2147483647) | ||
| PositiveInteger | INTEGER (0..2147483647) |