ECPPP-MIB
110 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434 | Nodeeicon | |||
| 1.3.6.1.4.1.434.2 | Nodemanagement | |||
| 1.3.6.1.4.1.434.2.2 | Nodemibv2 | |||
| 1.3.6.1.4.1.434.2.2.4 | Nodemodule | |||
| 1.3.6.1.4.1.434.2.2.4.23 | Nodeecppp | |||
| 1.3.6.1.4.1.434.2.2.4.23.1 | TableecpppStatusTable | not-accessible | mandatory | A table containing PPP-link global info |
| 1.3.6.1.4.1.434.2.2.4.23.1.1 | RowecpppStatusEntry | not-accessible | mandatory | Global information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.1 | ColumnecpppStatusPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.2 | ColumnecpppStatusState | read-only | mandatory | The state of the ppp connection |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.3 | ColumnecpppStatusAuthentProtocol | read-only | mandatory | Authentication protocol used |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.4 | ColumnecpppStatusQualityProtocol | read-only | mandatory | Link quality protocol used |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.5 | ColumnecpppStatusNegotiatedPktSize | read-only | mandatory | Packet size negotiated. |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.6 | ColumnecpppStatusWindowSize | read-only | mandatory | |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.7 | ColumnecpppStatusProtocolCompr | read-only | mandatory | Protocol Compression |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.8 | ColumnecpppStatusAddrCtrlCompr | read-only | mandatory | Address and Control field Compression. |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.9 | ColumnecpppStatusRestartTimer | read-only | mandatory | Timeout retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.10 | ColumnecpppStatusMaxPacketSize | read-only | mandatory | Maximum configured |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.11 | ColumnecpppStatusMaxTerminate | read-only | mandatory | Maximum Terminate Retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.12 | ColumnecpppStatusMaxConfig | read-only | mandatory | Maximum Configure Retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.13 | ColumnecpppStatusMaxFailure | read-only | mandatory | |
| 1.3.6.1.4.1.434.2.2.4.23.1.1.14 | ColumnecpppStatusNcpMask | read-only | mandatory | The bitmask value, 1 = IP, 2 = IPX, 4 = AT. |
| 1.3.6.1.4.1.434.2.2.4.23.2 | TableecpppStatsTable | not-accessible | mandatory | A table containing PPP-link specific variables for this PPP implementation. |
| 1.3.6.1.4.1.434.2.2.4.23.2.1 | RowecpppStatsEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.1 | ColumnecpppStatsPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.2 | ColumnecpppStatsLcpReqTx | read-only | mandatory | Number of LCP Configure-Request sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.3 | ColumnecpppStatsLcpReqRx | read-only | mandatory | Number of LCP Configure-Request received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.4 | ColumnecpppStatsLcpAckTx | read-only | mandatory | Number of LCP Configure-Ack sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.5 | ColumnecpppStatsLcpAckRx | read-only | mandatory | Number of LCP Configure-Ack received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.6 | ColumnecpppStatsLcpNakTx | read-only | mandatory | Number of LCP Configure-Nak sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.7 | ColumnecpppStatsLcpNakRx | read-only | mandatory | Number of LCP Configure-Nak received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.8 | ColumnecpppStatsLcpRejTx | read-only | mandatory | Number of LCP Configure-Reject sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.9 | ColumnecpppStatsLcpRejRx | read-only | mandatory | Number of LCP Configure-Reject received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.10 | ColumnecpppStatsLcpCodeRejTx | read-only | mandatory | Number of LCP Code-Reject sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.11 | ColumnecpppStatsLcpCodeRejRx | read-only | mandatory | Number of LCP Code-Reject received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.12 | ColumnecpppStatsLcpProRejTx | read-only | mandatory | Number of Protocol-Reject sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.13 | ColumnecpppStatsLcpProRejRx | read-only | mandatory | Number of Protocol-Reject received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.14 | ColumnecpppStatsLcpEchoReqTx | read-only | mandatory | Number of Echo-Request sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.15 | ColumnecpppStatsLcpEchoReqRx | read-only | mandatory | Number of Echo-Request received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.16 | ColumnecpppStatsLcpEchoReplyTx | read-only | mandatory | Number of Echo-Reply sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.17 | ColumnecpppStatsLcpEchoReplyRx | read-only | mandatory | Number of Echo-Reply received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.18 | ColumnecpppStatsLcpRestartTimeout | read-only | mandatory | Number of restart timer time-out |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.19 | ColumnecpppStatsLcpTermRetrans | read-only | mandatory | Number of LCP terminate request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.20 | ColumnecpppStatsLcpConfRetrans | read-only | mandatory | Number of LCP configure request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.21 | ColumnecpppStatsFrameTx | read-only | mandatory | Number of information frames sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.22 | ColumnecpppStatsFrameRx | read-only | mandatory | Number of information frames received |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.23 | ColumnecpppStatsCharTx | read-only | mandatory | Number of information characters sent |
| 1.3.6.1.4.1.434.2.2.4.23.2.1.24 | ColumnecpppStatsCharRx | read-only | mandatory | Number of information characters received |
| 1.3.6.1.4.1.434.2.2.4.23.3 | TableecpppIPInfoTable | not-accessible | mandatory | A table for PPP IP Protocol Info |
| 1.3.6.1.4.1.434.2.2.4.23.3.1 | RowecpppIPInfoEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.1 | ColumnecpppIPInfoPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.2 | ColumnecpppIPInfoNcpState | read-only | mandatory | State during NCP phase |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.3 | ColumnecpppIPInfoIPComprProtocol | read-only | mandatory | Compression protocol |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.4 | ColumnecpppIPInfoIPAddr | read-only | mandatory | IP Address |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.5 | ColumnecpppIPInfoIPcpMaxTerm | read-only | mandatory | Max. terminate retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.6 | ColumnecpppIPInfoIPcpMaxConfig | read-only | mandatory | Max. configure retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.3.1.7 | ColumnecpppIPInfoIPcpMaxFailure | read-only | mandatory | max config_nak retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.4 | TableecpppIPStatsTable | not-accessible | mandatory | A table for PPP IP Protocol Stats |
| 1.3.6.1.4.1.434.2.2.4.23.4.1 | RowecpppIPStatsEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.1 | ColumnecpppIPStatsPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.2 | ColumnecpppIPStatsDatagramsTx | read-only | mandatory | Number of datagrams sent |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.3 | ColumnecpppIPStatsDatagramsRx | read-only | mandatory | Number of datagrams received |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.4 | ColumnecpppIPStatsCharTx | read-only | mandatory | Number of characters sent |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.5 | ColumnecpppIPStatsCharRx | read-only | mandatory | Number of characters received |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.6 | ColumnecpppIPStatsNcpRestartTimeout | read-only | mandatory | Number of NCP restart timer time-out |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.7 | ColumnecpppIPStatsNcpTermRetrans | read-only | mandatory | Number of NCP terminate request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.4.1.8 | ColumnecpppIPStatsNcpReqRetrans | read-only | mandatory | Number of NCP configure request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.5 | TableecpppIPXInfoTable | not-accessible | mandatory | A table for PPP IPX Protocol Info. |
| 1.3.6.1.4.1.434.2.2.4.23.5.1 | RowecpppIPXInfoEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.5.1.1 | ColumnecpppIPXInfoPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.5.1.2 | ColumnecpppIPXInfoNcpState | read-only | mandatory | State during NCP phase |
| 1.3.6.1.4.1.434.2.2.4.23.5.1.3 | ColumnecpppIPXInfoIPXcpMaxTerm | read-only | mandatory | Max. terminate retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.5.1.4 | ColumnecpppIPXInfoIPXcpMaxConfig | read-only | mandatory | Max. configure retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.5.1.5 | ColumnecpppIPXInfoIPXcpMaxFailure | read-only | mandatory | Max config_nak retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.6 | TableecpppIPXStatsTable | not-accessible | mandatory | A table for PPP IP Protocol Stats. |
| 1.3.6.1.4.1.434.2.2.4.23.6.1 | RowecpppIPXStatsEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.1 | ColumnecpppIPXStatsPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured. |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.2 | ColumnecpppIPXStatsDatagramsTx | read-only | mandatory | Number of datagrams sent |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.3 | ColumnecpppIPXStatsDatagramsRx | read-only | mandatory | Number of datagrams received |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.4 | ColumnecpppIPXStatsCharTx | read-only | mandatory | Number of characters sent |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.5 | ColumnecpppIPXStatsCharRx | read-only | mandatory | Number of characters received |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.6 | ColumnecpppIPXStatsNcpRestartTimeout | read-only | mandatory | Number of NCP restart timer time-out |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.7 | ColumnecpppIPXStatsNcpTermRetrans | read-only | mandatory | Number of NCP terminate request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.6.1.8 | ColumnecpppIPXStatsNcpReqRetrans | read-only | mandatory | Number of NCP configure request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.7 | TableecpppATInfoTable | not-accessible | mandatory | A table for PPP AT Protocol Info |
| 1.3.6.1.4.1.434.2.2.4.23.7.1 | RowecpppATInfoEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.1 | ColumnecpppATInfoPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured. |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.2 | ColumnecpppATInfoNcpState | read-only | mandatory | State during NCP phase |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.3 | ColumnecpppATInfoRoutingProtocol | read-only | mandatory | Type of routing protocol |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.4 | ColumnecpppATInfoComprConfig | read-only | mandatory | Compression configuration |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.5 | ColumnecpppATInfoServerClass | read-only | mandatory | Class of the remote server |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.6 | ColumnecpppATInfoATAddr | read-only | mandatory | Local address |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.7 | ColumnecpppATInfoATNode | read-only | mandatory | Local node id |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.8 | ColumnecpppATInfoATcpMaxTerm | read-only | mandatory | Max. terminate retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.9 | ColumnecpppATInfoATcpMaxConfig | read-only | mandatory | Max. configure retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.10 | ColumnecpppATInfoATcpMaxFailure | read-only | mandatory | Max config_nak retransmission |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.11 | ColumnecpppATInfoSrvName | read-only | mandatory | Length of the server name |
| 1.3.6.1.4.1.434.2.2.4.23.7.1.12 | ColumnecpppATInfoZoneName | read-only | mandatory | AT ASCII name of the zone |
| 1.3.6.1.4.1.434.2.2.4.23.8 | TableecpppATStatsTable | not-accessible | mandatory | A table for PPP IP Protocol Stats |
| 1.3.6.1.4.1.434.2.2.4.23.8.1 | RowecpppATStatsEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.1 | ColumnecpppATStatsPortRef | read-only | mandatory | The id of the port on which the parameters in the table are configured |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.2 | ColumnecpppATStatsDatagramsTx | read-only | mandatory | Number of datagrams sent |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.3 | ColumnecpppATStatsDatagramsRx | read-only | mandatory | Number of datagrams received |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.4 | ColumnecpppATStatsCharTx | read-only | mandatory | Number of characters sent |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.5 | ColumnecpppATStatsCharRx | read-only | mandatory | Number of characters sent |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.6 | ColumnecpppATStatsNcpRestartTimeout | read-only | mandatory | Number of NCP restart timer time-out |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.7 | ColumnecpppATStatsNcpTermRetrans | read-only | mandatory | Number of NCP terminate request retransmissions. |
| 1.3.6.1.4.1.434.2.2.4.23.8.1.8 | ColumnecpppATStatsNcpReqRetrans | read-only | mandatory | Number of NCP configure request retransmissions. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NcpState | INTEGER { initial (1), starting (2), closed (3), stopped (4), closing (5), stopping (6), req-sent (7), ack-rcvd (8), ack-sent (9), opened (10), other (11) } | ||
| PortRef | INTEGER (1..48) | ||
| PppState | INTEGER { closed (1), opening (2), negotiating (3), opened (4), closing (5), other (6) } |