EICON-DIALER-MIB
476 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434 | Nodeeicon | |||
| 1.3.6.1.4.1.434.2 | Nodemanagement | |||
| 1.3.6.1.4.1.434.2.2 | Nodemibv2 | |||
| 1.3.6.1.4.1.434.2.2.4 | Nodemodule | |||
| 1.3.6.1.4.1.434.2.2.4.16 | Nodedialer | |||
| 1.3.6.1.4.1.434.2.2.4.16.1 | TabledialerInfoTable | not-accessible | mandatory | General Information Table for dailer. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1 | RowdialerInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.1 | ColumndialerInfoPortRef | read-only | mandatory | The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.2 | ColumndialerInfoType | read-only | mandatory | Type of interface connecting the gateway to local or remote host computers. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.3 | ColumndialerInfoTimeStart | read-only | mandatory | The time elapsed since the dialer was statrted. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.4 | ColumndialerInfoTimeConnect | read-only | mandatory | The time elapsed since the dialer established the current connection. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.5 | ColumndialerInfoLineSpeed | read-only | mandatory | The speed setting of the driver (line speed), or the dialer (modem speed). |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.6 | ColumndialerInfoDataEncoding | read-only | mandatory | The type of data encoding used on the connection. |
| 1.3.6.1.4.1.434.2.2.4.16.1.1.7 | ColumndialerInfoClockType | read-only | mandatory | The type of clocking used by the modem. |
| 1.3.6.1.4.1.434.2.2.4.16.2 | TabledialerDirectInfoTable | not-accessible | mandatory | General Information Table for Direct dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1 | RowdialerDirectInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.1 | ColumndialerDirectPortRef | read-only | mandatory | The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.2 | ColumndialerDirectIfType | read-only | mandatory | Interface type of the Dialer |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.3 | ColumndialerDirectMode | read-only | mandatory | States whether the modem is connected to a Leased or Dial-Up phone line. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.4 | ColumndialerDirectConnDelay | read-only | mandatory | Max time for connection in seconds. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.5 | ColumndialerDirectRtsDelay | read-only | mandatory | Delay between arrival of DSR and activation of RTS circuit in msec. |
| 1.3.6.1.4.1.434.2.2.4.16.2.1.6 | ColumndialerDirectState | read-only | mandatory | State of the Direct dialer: closed(1) - Modem signals on a dial modem were lost. opening(2) - Link is being set up (modem dialing). asnwering(3) - Accepting ca… |
| 1.3.6.1.4.1.434.2.2.4.16.3 | TabledialerDirectRs232InfoTable | not-accessible | mandatory | General Information Table for Direct dialer RS232. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1 | RowdialerDirectRs232InfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1.1 | ColumndialerDirectRs232PortRef | read-only | mandatory | The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1.2 | ColumndialerDirectRs232DbounceDelay | read-only | mandatory | This applies to Leased line only. It is the amount of time, expressed in msecs, that DSR signal stays on. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1.3 | ColumndialerDirectRs232DtrSignal | read-only | mandatory | The current status of the DTR signal. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1.4 | ColumndialerDirectRs232DsrSignal | read-write | mandatory | The current status of the DSR signal. |
| 1.3.6.1.4.1.434.2.2.4.16.3.1.5 | ColumndialerDirectRs232RiSignal | read-only | mandatory | The current status of the RI signal. This is set to ON when there is an incoming call. |
| 1.3.6.1.4.1.434.2.2.4.16.4 | TabledialerDirectX21InfoTable | not-accessible | mandatory | General Information Table for Direct dialer X21. |
| 1.3.6.1.4.1.434.2.2.4.16.4.1 | RowdialerDirectX21InfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.4.1.1 | ColumndialerDirectX21PortRef | read-only | mandatory | The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. |
| 1.3.6.1.4.1.434.2.2.4.16.4.1.2 | ColumndialerDirectX21CtrlSignal | read-only | mandatory | The control circuit status. |
| 1.3.6.1.4.1.434.2.2.4.16.4.1.3 | ColumndialerDirectX21IndicSignal | read-only | mandatory | The indication circuit status. |
| 1.3.6.1.4.1.434.2.2.4.16.5 | TabledialerV25bisInfoTable | not-accessible | mandatory | General Information Table for V25Bis dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1 | RowdialerV25bisInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.1 | ColumndialerV25bisPortRef | read-only | mandatory | The Port Number. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.2 | ColumndialerV25bisPrimaryNum | read-write | mandatory | The main telephone number stored in the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.3 | ColumndialerV25bisSecondaryNum | read-write | mandatory | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy of if there is no answer. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.4 | ColumndialerV25bisAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.5 | ColumndialerV25bisRetryAllowed | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.6 | ColumndialerV25bisMaxRetries | read-only | mandatory | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.7 | ColumndialerV25bisRetryDelay | read-only | mandatory | The amount of time in msecs between redial attempts. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.8 | ColumndialerV25bisConnDelay | read-only | mandatory | Maximum delay for connection establishment (secs). |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.9 | ColumndialerV25bisOnOffDelay | read-only | mandatory | The delay allowed in seconds for the DSR to go off before hangup. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.10 | ColumndialerV25bisLossDelay | read-only | mandatory | Amount of delay in msecs before DSR debouncing for OFF. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.11 | ColumndialerV25bisMinDsrOnDelay | read-only | mandatory | Amount of delay in msecs before DSR debouncing for ON. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.12 | ColumndialerV25bisRiDtrDelay | read-only | mandatory | Amount of delay in msec before raising DTR when RING occurs. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.13 | ColumndialerV25bisHangupDelay | read-only | mandatory | Amount of delay in secs before hangup, if DSR goes OFF in connected state. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.14 | ColumndialerV25bisDeltaRiDelay | read-only | mandatory | Delay in msecs before rings are no longer occur. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.15 | ColumndialerV25bisCtsOnDelay | read-only | mandatory | Maximum delay in msecs for sending a message to the modem. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.16 | ColumndialerV25bisDtrSignal | read-only | mandatory | DTR status. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.17 | ColumndialerV25bisDsrSignal | read-only | mandatory | DSR status. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.18 | ColumndialerV25bisCtsSignal | read-only | mandatory | CTS status. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.19 | ColumndialerV25bisRiSignal | read-only | mandatory | RI status. |
| 1.3.6.1.4.1.434.2.2.4.16.5.1.20 | ColumndialerV25bisState | read-only | mandatory | The status of the V.25bis modem: on-hook (1) - Modem not active ready (2) - Connection established dialing (3) - Dialing a number connect (4) - Successful dial… |
| 1.3.6.1.4.1.434.2.2.4.16.6 | TabledialerAtCmdInfoTable | not-accessible | mandatory | General Information Table for AT-CMD dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1 | RowdialerAtCmdInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.1 | ColumndialerAtCmdPortRef | read-only | mandatory | The Port Number. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.2 | ColumndialerAtCmdPrimaryNum | read-write | mandatory | The main telephone number stored in the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.3 | ColumndialerAtCmdSecondaryNum | read-write | mandatory | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.4 | ColumndialerAtCmdAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.5 | ColumndialerAtCmdRetryAllowed | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.6 | ColumndialerAtCmdMaxRetries | read-only | mandatory | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.7 | ColumndialerAtCmdRetryDelay | read-only | mandatory | The amount of time in msecs between redial attempts. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.8 | ColumndialerAtCmdConnDelay | read-only | mandatory | Maximum delay for connection establishment (secs). |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.9 | ColumndialerAtCmdOnOffDelay | read-only | mandatory | The delay allowed in seconds for the DSR signal to go off before hangup. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.10 | ColumndialerAtCmdLossDelay | read-only | mandatory | Number of msecs allowed before DSR debouncing for OFF. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.11 | ColumndialerAtCmdMinDsrOnDelay | read-only | mandatory | msecs DSR debouncing for ON before going OFF. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.12 | ColumndialerAtCmdRiDtrDelay | read-only | mandatory | Amount of delay in msec, before raising DTR when RING occurs. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.13 | ColumndialerAtCmdHangupDelay | read-only | mandatory | Amount of delay in secs before hangup, if DSR goes OFF in connected state. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.14 | ColumndialerAtCmdDeltaRiDelay | read-only | mandatory | delay in msecs before rings no longer occur. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.15 | ColumndialerAtCmdParity | read-only | mandatory | The parity. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.16 | ColumndialerAtCmdBitsPerByte | read-only | mandatory | The number of data bits per byte. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.17 | ColumndialerAtCmdModemSpeed | read-only | mandatory | Modem Speed. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.18 | ColumndialerAtCmdDtrSignal | read-only | mandatory | DTR status. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.19 | ColumndialerAtCmdDsrSignal | read-only | mandatory | DSR status. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.20 | ColumndialerAtCmdRiSignal | read-only | mandatory | RI status. |
| 1.3.6.1.4.1.434.2.2.4.16.6.1.21 | ColumndialerAtCmdState | read-only | mandatory | The status of the AT modem: on-hook (1) - modem not active dialing (2) - dialing a number answering (3) - accepting call from remote ringing (4) - incoming cal… |
| 1.3.6.1.4.1.434.2.2.4.16.7 | TabledialerV22BisDnaInfoTable | not-accessible | mandatory | General Information Table for V22BISDNA dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1 | RowdialerV22BisDnaInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.1 | ColumndialerV22BisDnaPortRef | read-only | mandatory | The Port Number. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.2 | ColumndialerV22BisDnaPrimaryNum | read-write | mandatory | The main telephone number stored in the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.3 | ColumndialerV22BisDnaSecondaryNum | read-write | mandatory | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.4 | ColumndialerV22BisDnaAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.5 | ColumndialerV22BisDnaRetryAllowed | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.6 | ColumndialerV22BisDnaMaxRetries | read-only | mandatory | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.7 | ColumndialerV22BisDnaCallProgress | read-only | mandatory | Call progress tone detection. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.8 | ColumndialerV22BisDnaDecadic | read-only | mandatory | Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number… |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.9 | ColumndialerV22BisDnaMakeBreakRatio | read-only | mandatory | Ratio for PULSE and DIAL make and break time. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.10 | ColumndialerV22BisDnaRetryDelay | read-only | mandatory | The amount of time in msecs between redial attempts. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.11 | ColumndialerV22BisDnaMinDialDelay | read-only | mandatory | The length of delay (msec) associated with a comma placed in a dialing command. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.12 | ColumndialerV22BisDnaWaitDialTone | read-only | mandatory | The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.13 | ColumndialerV22BisDnaWaitCarrier | read-only | mandatory | The amount of time (msec) the modem waits for valid carrier after completing a dial. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.14 | ColumndialerV22BisDnaHndshkAbortTimer | read-only | mandatory | The amount of time (sec) allowed before the call is aborted if DSR does not go ON. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.15 | ColumndialerV22BisDnaGuardTone | read-only | mandatory | Indicates a guard tone frequency. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.16 | ColumndialerV22BisDnaPulseDelay | read-only | mandatory | The delay (msec) between digits dialed on a pulse line. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.17 | ColumndialerV22BisDnaDTMFDuration | read-only | mandatory | The tone duration (msec) used in DMTF dialing. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.18 | ColumndialerV22BisDnaDTMFDelay | read-only | mandatory | The delay (msec) between digits dialed when in tone dial mode. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.19 | ColumndialerV22BisDnaDTMFLevel | read-only | mandatory | The tone dialing level attenuation in dB. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.20 | ColumndialerV22BisDnaTxLevel | read-only | mandatory | The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.21 | ColumndialerV22BisDnaRxLevel | read-only | mandatory | Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.22 | ColumndialerV22BisDnaRiNbr | read-only | mandatory | The number of rings required before the modem answers, if it is set to auto-answer mode. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.23 | ColumndialerV22BisDnaDeltaRiDelay | read-only | mandatory | delay in msecs before rings no longer occur. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.24 | ColumndialerV22BisDnaRiDtrDelay | read-only | mandatory | Amount of delay in msec, before raising DTR when RING occurs. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.25 | ColumndialerV22BisDnaDsrRtsDelay | read-only | mandatory | Delay between arrival of DSR and activation of RTS circuit in msec. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.26 | ColumndialerV22BisDnaModemSpeed | read-only | mandatory | Modem Speed. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.27 | ColumndialerV22BisDnaDtrSignal | read-only | mandatory | DTR status. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.28 | ColumndialerV22BisDnaDsrSignal | read-only | mandatory | DSR status. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.29 | ColumndialerV22BisDnaRiSignal | read-only | mandatory | RI status. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.30 | ColumndialerV22BisDnaCdSignal | read-only | mandatory | Carrier detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.31 | ColumndialerV22BisDnaToneInd | read-only | mandatory | Tone indication. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.32 | ColumndialerV22BisDnaDloInd | read-only | mandatory | Dial line occupied indication. |
| 1.3.6.1.4.1.434.2.2.4.16.7.1.33 | ColumndialerV22BisDnaState | read-only | mandatory | Status of the V22bis Dna modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retr… |
| 1.3.6.1.4.1.434.2.2.4.16.8 | TabledialerV22BisImcInfoTable | not-accessible | mandatory | General Information Table for V22BISIMC dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1 | RowdialerV22BisImcInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.1 | ColumndialerV22BisImcPortRef | read-only | mandatory | The Port Number. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.2 | ColumndialerV22BisImcPrimaryNum | read-write | mandatory | The main telephone number stored in the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.3 | ColumndialerV22BisImcSecondaryNum | read-write | mandatory | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.4 | ColumndialerV22BisImcAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.5 | ColumndialerV22BisImcRetryAllowed | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.6 | ColumndialerV22BisImcMaxRetries | read-only | mandatory | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.7 | ColumndialerV22BisImcCallProgress | read-only | mandatory | Call progress tone detection. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.8 | ColumndialerV22BisImcDecadic | read-only | mandatory | Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number… |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.9 | ColumndialerV22BisImcMakeBreakRatio | read-only | mandatory | Ratio of PULSE and DIAL make and break time. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.10 | ColumndialerV22BisImcRetryDelay | read-only | mandatory | The amount of time in msecs between redial attempts. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.11 | ColumndialerV22BisImcMinDialDelay | read-only | mandatory | The length of delay (msec) associated with a comma placed in a dialing command. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.12 | ColumndialerV22BisImcWaitDialTone | read-only | mandatory | The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.13 | ColumndialerV22BisImcWaitCarrier | read-only | mandatory | The amount of time (msec) the modem waits for valid carrier after completing a dial. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.14 | ColumndialerV22BisImcHndshkAbortTimer | read-only | mandatory | The amount of time (sec) allowed before the call is aborted if DSR does not go ON. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.15 | ColumndialerV22BisImcGuardTone | read-only | mandatory | Indicates a guard tone frequency. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.16 | ColumndialerV22BisImcPulseDelay | read-only | mandatory | The delay between (msec) digits dialed on a pulse line. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.17 | ColumndialerV22BisImcDTMFDuration | read-only | mandatory | The tone (msec) duration used in DMTF dialing. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.18 | ColumndialerV22BisImcDTMFDelay | read-only | mandatory | The delay (msec) between digits dialed when in tone dial mode. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.19 | ColumndialerV22BisImcDTMFLevel | read-only | mandatory | The tone dialing level attenuation in dB. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.20 | ColumndialerV22BisImcTxLevel | read-only | mandatory | The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.21 | ColumndialerV22BisImcRxLevel | read-only | mandatory | Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.22 | ColumndialerV22BisImcRiNbr | read-only | mandatory | The numbet of rings required before the modem answers, if it is set to auto-answer mode. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.23 | ColumndialerV22BisImcDeltaRiDelay | read-only | mandatory | delay in msecs before rings no longer occur. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.24 | ColumndialerV22BisImcRiDtrDelay | read-only | mandatory | Amount of delay in msec, before raising DTR when RING occurs. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.25 | ColumndialerV22BisImcDsrRtsDelay | read-only | mandatory | Delay between arrival of DSR and activation of RTS circuit in msec. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.26 | ColumndialerV22BisImcModemSpeed | read-only | mandatory | Modem Speed. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.27 | ColumndialerV22BisImcDtrSignal | read-only | mandatory | DTR status. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.28 | ColumndialerV22BisImcDsrSignal | read-only | mandatory | DSR status. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.29 | ColumndialerV22BisImcRiSignal | read-only | mandatory | RI status. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.30 | ColumndialerV22BisImcCdSignal | read-only | mandatory | Carrier Detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.31 | ColumndialerV22BisImcToneInd | read-only | mandatory | Tone indication. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.32 | ColumndialerV22BisImcDloInd | read-only | mandatory | Dial line occupied indication. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.33 | ColumndialerV22BisImcLineType | read-only | mandatory | States whether the modem is connected to a Leased or Dial-Up phone line. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.34 | ColumndialerV22BisImcLeasedOpertn | read-only | mandatory | This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.35 | ColumndialerV22BisImcSpeakerLevel | read-only | mandatory | The volume level of the Eiconcard's speaker. |
| 1.3.6.1.4.1.434.2.2.4.16.8.1.36 | ColumndialerV22BisImcState | read-only | mandatory | Status of the V22bis Imc modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retr… |
| 1.3.6.1.4.1.434.2.2.4.16.9 | TabledialerV32BisInfoTable | not-accessible | mandatory | General Information Table for V32Bis dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1 | RowdialerV32BisInfoEntry | not-accessible | mandatory | The set of dialer configuration attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.1 | ColumndialerV32BisPortRef | read-only | mandatory | The Port Number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.2 | ColumndialerV32BisPrimNum | read-write | mandatory | The main telephone number stored in the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.3 | ColumndialerV32BisSecNum | read-write | mandatory | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.4 | ColumndialerV32BisOverrNum | read-only | mandatory | Override number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.5 | ColumndialerV32BisCurrNum | read-only | mandatory | Current number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.6 | ColumndialerV32BisPrimBitRate | read-only | mandatory | Default bit rate for primary number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.7 | ColumndialerV32BisSecBitRate | read-only | mandatory | Default bit rate for secondary number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.8 | ColumndialerV32BisOverrBitRate | read-only | mandatory | Default bit rate for override number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.9 | ColumndialerV32BisCurrBitRate | read-only | mandatory | Default bit rate for current number. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.10 | ColumndialerV32BisPrimConfig | read-only | mandatory | Dial modem primary configuration |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.11 | ColumndialerV32BisSecConfig | read-only | mandatory | Dial modem secondary configuration |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.12 | ColumndialerV32BisOverrConfig | read-only | mandatory | Dial modem override configuration |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.13 | ColumndialerV32BisCurrConfig | read-only | mandatory | Dial modem current configuration |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.14 | ColumndialerV32BisCurrRetry | read-only | mandatory | Current number of retries. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.15 | ColumndialerV32BisRingCount | read-only | mandatory | Incoming ring counter. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.16 | ColumndialerV32BisAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.17 | ColumndialerV32BisDialMethod | read-only | mandatory | The method used for dialing. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.18 | ColumndialerV32BisRetry | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.19 | ColumndialerV32BisCallFailure | read-only | mandatory | Reason for last call failure. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.20 | ColumndialerV32BisCarrierDetect | read-only | mandatory | Delay in msec to wait for verification of carrier detect. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.21 | ColumndialerV32BisCarrierWait | read-only | mandatory | Delay in msec to wait for carrier detect. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.22 | ColumndialerV32BisHangupVerify | read-only | mandatory | Delay in msec to wait to verify for hangup. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.23 | ColumndialerV32BisHangupSignal | read-only | mandatory | Hangup signal state. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.24 | ColumndialerV32BisTxLevel | read-only | mandatory | The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.25 | ColumndialerV32BisRxLevel | read-only | mandatory | Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.26 | ColumndialerV32BisGuardTone | read-only | mandatory | Indicates a guard tone frequency. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.27 | ColumndialerV32BisLeasedLine | read-only | mandatory | Dial or leased line. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.28 | ColumndialerV32BisLeaseMode | read-only | mandatory | This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.29 | ColumndialerV32BisLLTxLevel | read-only | mandatory | The attenuation level (Db) on data transmission once the handshake is completed with the remote modem (for leased line). |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.30 | ColumndialerV32BisLLConfig | read-only | mandatory | Leased line configuration |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.31 | ColumndialerV32BisLLBitRate | read-only | mandatory | Leased line bit rate. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.32 | ColumndialerV32BisCallingTone | read-only | mandatory | Calling tone state. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.33 | ColumndialerV32BisAutoMode | read-only | mandatory | Auto mode state (fallback/forward). |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.34 | ColumndialerV32BisRetryAllowed | read-only | mandatory | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.35 | ColumndialerV32BisMaxRetry | read-only | mandatory | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.36 | ColumndialerV32BisDialTone | read-only | mandatory | The dial tone state. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.37 | ColumndialerV32BisDialToneWait | read-only | mandatory | The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.38 | ColumndialerV32BisRetryWait | read-only | mandatory | Retry timer delay. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.39 | ColumndialerV32BisHangupWait | read-only | mandatory | Hangup timer delay. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.40 | ColumndialerV32BisDialPauseWait | read-only | mandatory | maximum delay before dial. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.41 | ColumndialerV32BisDeltaRiWait | read-only | mandatory | Maximum delay (msec) between 2 rings. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.42 | ColumndialerV32BisDTMFDuration | read-only | mandatory | The tone duration (msec) used in DMTF dialing. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.43 | ColumndialerV32BisDTMFDelay | read-only | mandatory | The delay (msec) between digits dialed when in tone dial mode. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.44 | ColumndialerV32BisDTMFFreq1Level | read-only | mandatory | DTMF high frequency power level. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.45 | ColumndialerV32BisDTMFFreq2Level | read-only | mandatory | DTMF low frequency power level. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.46 | ColumndialerV32BisPulseMakeTime | read-only | mandatory | Pulse make time (msec). |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.47 | ColumndialerV32BisPulseBreakTime | read-only | mandatory | Pulse break time (msec). |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.48 | ColumndialerV32BisPulseDelay | read-only | mandatory | Pulse interdigit delay (msec). |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.49 | ColumndialerV32BisSpeakerLevel | read-only | mandatory | The volume level of the Eiconcard's speaker. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.50 | ColumndialerV32BisRiToAnswer | read-only | mandatory | Number of rings befor answering. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.51 | ColumndialerV32BisAnswerBitRate | read-only | mandatory | Answer bit rate. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.52 | ColumndialerV32BisAnswerConfig | read-only | mandatory | Answer configuration. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.53 | ColumndialerV32BisRetrain | read-only | mandatory | . |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.54 | ColumndialerV32BisEqmLevel | read-only | mandatory | . |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.55 | ColumndialerV32BisRiOnOffDetect | read-only | mandatory | Ring signal status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.56 | ColumndialerV32BisCdDetect | read-only | mandatory | Carrier detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.57 | ColumndialerV32BisRingbackDetect | read-only | mandatory | Ringback signal detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.58 | ColumndialerV32BisAnswerDetect | read-only | mandatory | Answer tone detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.59 | ColumndialerV32BisBusyDetect | read-only | mandatory | Busy tone detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.60 | ColumndialerV32BisDiscDetect | read-only | mandatory | Disconnect detect status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.61 | ColumndialerV32BisCdSignal | read-only | mandatory | CD signal status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.62 | ColumndialerV32BisDsrSignal | read-only | mandatory | DSR signal status. |
| 1.3.6.1.4.1.434.2.2.4.16.9.1.63 | ColumndialerV32BisState | read-only | mandatory | State of the V32bis dialer: m-closed (1) - Dialer not active m-opened (2) - No connection establised m-local-test (3) - Local analog loopback m-ringing (4) - I… |
| 1.3.6.1.4.1.434.2.2.4.16.10 | TabledialerControlTable | not-accessible | mandatory | The table for dynamic dialing entries. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1 | RowdialerControlEntry | not-accessible | mandatory | The set of attributes for one entry per port. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.1 | ColumndialerCtrlPortRef | read-only | mandatory | The Port number of the dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.2 | ColumndialerCtrlAction | read-write | mandatory | The Action states. exec (1) - This action executes the script file which would be set in dialerCtrlScriptFile. dial (2) - This action dials the number stored i… |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.3 | ColumndialerCtrlAnsEnable | read-write | mandatory | States whether or not the dialer answers incoming calls. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.4 | ColumndialerCtrlDirectDSROnOff | read-write | mandatory | Defines the setting of the Data Rate Select signal. Setting this mib is valid only if the dialer type is Direct and the interface is RS-232. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.5 | ColumndialerCtrlNumber | read-write | mandatory | The primary Phone Number |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.6 | ColumndialerCtrlScriptFile | read-write | mandatory | The Complete path where the Dialer Script file resides. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.7 | ColumndialerCtrlActionState | read-only | mandatory | The state of the action operation performed by the Agent as a result of setting the values to the dialerCtrlAction. The Management station will poll that varia… |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.8 | ColumndialerCtrlActionError | read-only | mandatory | If the value is 0, this means no error. Otherwise, the value indicates the error code returned after the action operation. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.9 | ColumndialerCtrlConfig | read-write | mandatory | The config to which the V32 dialer will have to be set. This information is only used when using a V32 dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.10 | ColumndialerCtrlBitRate | read-write | mandatory | The Bit Rate to which the V32 dialer will have to be set. This information is only used when using a V32 dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.11 | ColumndialerCtrlType | read-write | mandatory | The remote directory number type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.12 | ColumndialerCtrlPlan | read-write | mandatory | The remote directory number plan. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.13 | ColumndialerCtrlSub | read-write | mandatory | The remote subaddress. When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed. Used by ISDN dial… |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.14 | ColumndialerCtrlSubType | read-write | mandatory | The local subaddress type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.15 | ColumndialerCtrlTns | read-write | mandatory | The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits a… |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.16 | ColumndialerCtrlNumberTemp | read-only | mandatory | The temporary Phone Number. DEFINED ONLY FOR ISDN TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.17 | ColumndialerCtrlDialMask | read-only | mandatory | Read the mask state. DEFINED ONLY FOR TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.10.1.18 | ColumndialerCtrlCallSpeed | read-only | mandatory | Read the mask state. DEFINED ONLY FOR TESTS. |
| 1.3.6.1.4.1.434.2.2.4.16.11 | TabledialerIsdnStatusTable | not-accessible | mandatory | The table for ISDN dialer Status. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1 | RowdialerIsdnStatusEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1.1 | ColumndialerIsdnStatusPortRef | read-only | mandatory | The port number for which isdn status is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1.2 | ColumndialerIsdnStatusSwitchType | read-only | mandatory | The current switch type in use for isdn. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1.3 | ColumndialerIsdnStatusChType | read-only | mandatory | The isdn channel type, B channel or D channel. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1.4 | ColumndialerIsdnStatusL1State | read-only | mandatory | The current state of layer 1 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.11.1.5 | ColumndialerIsdnStatusState | read-only | mandatory | The current state of the ISDN dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.12 | TabledialerIsdnNI1BChTable | not-accessible | mandatory | The table for the ISDN NI1 BChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1 | RowdialerIsdnNI1BChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.1 | ColumndialerIsdnNI1BChPortRef | read-only | mandatory | The port number which is configured for NI1-BChannel. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.2 | ColumndialerIsdnNI1BChSpid | read-only | mandatory | The Terminal's Service Profile IDentification. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.3 | ColumndialerIsdnNI1BChSpidStatus | read-only | mandatory | The current SPID status. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.4 | ColumndialerIsdnNI1BChLocalDn | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.5 | ColumndialerIsdnNI1BChLocalSub | read-only | mandatory | The local subaddress. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.6 | ColumndialerIsdnNI1BChTnsDigs | read-write | mandatory | The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits a… |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.7 | ColumndialerIsdnNI1BChRemoteDn | read-write | mandatory | When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.8 | ColumndialerIsdnNI1BChRemoteSub | read-write | mandatory | When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.9 | ColumndialerIsdnNI1BChCallType | read-only | mandatory | The current call type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.10 | ColumndialerIsdnNI1BChCallSpeed | read-write | mandatory | The current call speed. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.11 | ColumndialerIsdnNI1BChBChannel | read-only | mandatory | The current B channel connected to. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.12 | ColumndialerIsdnNI1BChAnsEnable | read-only | mandatory | Answer Enable Status. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.13 | ColumndialerIsdnNI1BChCcState | read-only | mandatory | The state of call control subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.14 | ColumndialerIsdnNI1BChCcNbCause | read-only | mandatory | The number of causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.15 | ColumndialerIsdnNI1BChCcCause | read-only | mandatory | Last causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.16 | ColumndialerIsdnNI1BChL3State | read-only | mandatory | The state of layer 3 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.17 | ColumndialerIsdnNI1BChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.18 | ColumndialerIsdnNI1BChTeiValue | read-only | mandatory | The value of the terminal is dynamic TEI. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.19 | ColumndialerIsdnNI1BChTeiStatus | read-only | mandatory | The status of the terminal's dynamic TEI. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.20 | ColumndialerIsdnNI1BChLocalDnType | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.21 | ColumndialerIsdnNI1BChLocalDnPlan | read-only | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.22 | ColumndialerIsdnNI1BChLocalSubType | read-only | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.23 | ColumndialerIsdnNI1BChTnsNetId | read-only | mandatory | The transit network id. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.24 | ColumndialerIsdnNI1BChTnsIdPlan | read-only | mandatory | The transit network plan. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.25 | ColumndialerIsdnNI1BChRemoteDnType | read-write | mandatory | The remote directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.26 | ColumndialerIsdnNI1BChRemoteDnPlan | read-write | mandatory | The remote directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.27 | ColumndialerIsdnNI1BChRemoteSubType | read-write | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.28 | ColumndialerIsdnNI1BChScrStatus | read-only | mandatory | The status of call screening. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.29 | ColumndialerIsdnNI1BChCallOpt | read-only | mandatory | The current call option. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.30 | ColumndialerIsdnNI1BChStoDefined | read-only | mandatory | The validity of sto- elements. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.31 | ColumndialerIsdnNI1BChStoDnType | read-only | mandatory | The stored directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.32 | ColumndialerIsdnNI1BChStoDnPlan | read-only | mandatory | The stored directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.33 | ColumndialerIsdnNI1BChStoDn | read-only | mandatory | The stored directory number. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.34 | ColumndialerIsdnNI1BChStoSubType | read-only | mandatory | The stored subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.35 | ColumndialerIsdnNI1BChStoSub | read-only | mandatory | The stored subaddress. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.36 | ColumndialerIsdnNI1BChStoTnsNetId | read-only | mandatory | The stored transit network id. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.37 | ColumndialerIsdnNI1BChStoTnsPlan | read-only | mandatory | The stored transit network plan. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.38 | ColumndialerIsdnNI1BChStoDigs | read-only | mandatory | The stored transit network address. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.39 | ColumndialerIsdnNI1BChStoBcType | read-only | mandatory | The stored bearer cap. type. |
| 1.3.6.1.4.1.434.2.2.4.16.12.1.40 | ColumndialerIsdnNI1BChStoBcOpt | read-only | mandatory | The stored bearer cap. option. |
| 1.3.6.1.4.1.434.2.2.4.16.13 | TabledialerIsdnNI1DChTable | not-accessible | mandatory | The table for the ISDN NI1 DChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1 | RowdialerIsdnNI1DChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.1 | ColumndialerIsdnNI1DChPortRef | read-only | mandatory | The port number configured for the NI1 DChannel. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.2 | ColumndialerIsdnNI1DChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.3 | ColumndialerIsdnNI1DChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.4 | ColumndialerIsdnNI1DChL2State | read-only | mandatory | The current layer 2 state. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.5 | ColumndialerIsdnNI1DChP3State | read-only | mandatory | The current Packet layer state. |
| 1.3.6.1.4.1.434.2.2.4.16.13.1.6 | ColumndialerIsdnNI1DChActState | read-only | mandatory | The current activation FSM state. |
| 1.3.6.1.4.1.434.2.2.4.16.14 | TabledialerIsdnTR6BChTable | not-accessible | mandatory | The table for the ISDN TR6 BChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1 | RowdialerIsdnTR6BChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.1 | ColumndialerIsdnTR6BChPortRef | read-only | mandatory | The port number for which the 1TR6 BChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.2 | ColumndialerIsdnTR6BChLocalDn | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.3 | ColumndialerIsdnTR6BChRemoteDn | read-write | mandatory | When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.4 | ColumndialerIsdnTR6BChCallType | read-only | mandatory | The current call type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.5 | ColumndialerIsdnTR6BChCallSpeed | read-write | mandatory | The current call speed. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.6 | ColumndialerIsdnTR6BChBChannel | read-only | mandatory | The current B Channel connected to. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.7 | ColumndialerIsdnTR6BChAnsEnable | read-only | mandatory | Answer enable status. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.8 | ColumndialerIsdnTR6BChCcState | read-only | mandatory | The state of call control subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.9 | ColumndialerIsdnTR6BChCcNbCause | read-only | mandatory | The number of causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.10 | ColumndialerIsdnTR6BChCcCause | read-only | mandatory | Last causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.11 | ColumndialerIsdnTR6BChL3State | read-only | mandatory | The state of layer 3 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.12 | ColumndialerIsdnTR6BChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.13 | ColumndialerIsdnTR6BChLocalDnType | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.14 | ColumndialerIsdnTR6BChLocalDnPlan | read-only | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.15 | ColumndialerIsdnTR6BChRemoteDnType | read-write | mandatory | The remote directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.16 | ColumndialerIsdnTR6BChRemoteDnPlan | read-write | mandatory | The remote directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.17 | ColumndialerIsdnTR6BChScrStatus | read-only | mandatory | The status of call screening. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.18 | ColumndialerIsdnTR6BChCallOpt | read-only | mandatory | The current call option. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.19 | ColumndialerIsdnTR6BChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.20 | ColumndialerIsdnTR6BChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.21 | ColumndialerIsdnTR6BChStoDefined | read-only | mandatory | The validity of sto- elements. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.22 | ColumndialerIsdnTR6BChStoDnType | read-only | mandatory | The stored directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.23 | ColumndialerIsdnTR6BChStoDnPlan | read-only | mandatory | The stored directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.24 | ColumndialerIsdnTR6BChStoDn | read-only | mandatory | The stored directory number. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.25 | ColumndialerIsdnTR6BChStoBcType | read-only | mandatory | The stored bearer cap. type. |
| 1.3.6.1.4.1.434.2.2.4.16.14.1.26 | ColumndialerIsdnTR6BChStoBcOpt | read-only | mandatory | The stored bearer cap. option. |
| 1.3.6.1.4.1.434.2.2.4.16.15 | TabledialerIsdnVN3BChTable | not-accessible | mandatory | The table for the ISDN VN3 BChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1 | RowdialerIsdnVN3BChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.1 | ColumndialerIsdnVN3BChPortRef | read-only | mandatory | The port number for which the VN3 BChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.2 | ColumndialerIsdnVN3BChLocalDnType | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.3 | ColumndialerIsdnVN3BChLocalDnPlan | read-only | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.4 | ColumndialerIsdnVN3BChLocalDn | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.5 | ColumndialerIsdnVN3BChLocalSubType | read-only | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.6 | ColumndialerIsdnVN3BChLocalSub | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.7 | ColumndialerIsdnVN3BChRemoteDnType | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.8 | ColumndialerIsdnVN3BChRemoteDnPlan | read-write | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.9 | ColumndialerIsdnVN3BChRemoteDn | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.10 | ColumndialerIsdnVN3BChRemoteSubType | read-write | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.11 | ColumndialerIsdnVN3BChRemoteSub | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.12 | ColumndialerIsdnVN3BChCallType | read-only | mandatory | The current call type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.13 | ColumndialerIsdnVN3BChCallSpeed | read-write | mandatory | The current call speed. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.14 | ColumndialerIsdnVN3BChBChannel | read-only | mandatory | The current B Channel connected to. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.15 | ColumndialerIsdnVN3BChAnsEnable | read-only | mandatory | Answer enable status. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.16 | ColumndialerIsdnVN3BChScrStatus | read-only | mandatory | The status of call screening. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.17 | ColumndialerIsdnVN3BChCallOpt | read-only | mandatory | The current call option. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.18 | ColumndialerIsdnVN3BChCcState | read-only | mandatory | The state of call control subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.19 | ColumndialerIsdnVN3BChCcNbCause | read-only | mandatory | The number of causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.20 | ColumndialerIsdnVN3BChCcCause | read-only | mandatory | Last causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.21 | ColumndialerIsdnVN3BChL3State | read-only | mandatory | The state of layer 3 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.22 | ColumndialerIsdnVN3BChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.23 | ColumndialerIsdnVN3BChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.24 | ColumndialerIsdnVN3BChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.25 | ColumndialerIsdnVN3BChStoDefined | read-only | mandatory | The validity of sto- elements. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.26 | ColumndialerIsdnVN3BChStoDnType | read-only | mandatory | The stored directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.27 | ColumndialerIsdnVN3BChStoDnPlan | read-only | mandatory | The stored directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.28 | ColumndialerIsdnVN3BChStoDn | read-only | mandatory | The stored directory number. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.29 | ColumndialerIsdnVN3BChStoSubType | read-only | mandatory | The stored subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.30 | ColumndialerIsdnVN3BChStoSub | read-only | mandatory | The stored subaddress. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.31 | ColumndialerIsdnVN3BChStoBcType | read-only | mandatory | The stored bearer cap type. |
| 1.3.6.1.4.1.434.2.2.4.16.15.1.32 | ColumndialerIsdnVN3BChStoBcOpt | read-only | mandatory | The stored bearer cap option. |
| 1.3.6.1.4.1.434.2.2.4.16.16 | TabledialerIsdnVN3DChTable | not-accessible | mandatory | The table for the ISDN VN3 DChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1 | RowdialerIsdnVN3DChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1.1 | ColumndialerIsdnVN3DChPortRef | read-only | mandatory | The port number for which the VN3 DChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1.2 | ColumndialerIsdnVN3DChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1.3 | ColumndialerIsdnVN3DChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1.4 | ColumndialerIsdnVN3DChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.16.1.5 | ColumndialerIsdnVN3DChP3State | read-only | mandatory | The current Packet layer state. |
| 1.3.6.1.4.1.434.2.2.4.16.17 | TabledialerIsdnNET3BChTable | not-accessible | mandatory | The table for the ISDN NET3 BChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1 | RowdialerIsdnNET3BChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.1 | ColumndialerIsdnNET3BChPortRef | read-only | mandatory | The port number for which the NET3 BChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.2 | ColumndialerIsdnNET3BChLocalDnType | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.3 | ColumndialerIsdnNET3BChLocalDnPlan | read-only | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.4 | ColumndialerIsdnNET3BChLocalDn | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.5 | ColumndialerIsdnNET3BChLocalSubType | read-only | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.6 | ColumndialerIsdnNET3BChLocalSub | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.7 | ColumndialerIsdnNET3BChRemoteDnType | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.8 | ColumndialerIsdnNET3BChRemoteDnPlan | read-write | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.9 | ColumndialerIsdnNET3BChRemoteDn | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.10 | ColumndialerIsdnNET3BChRemoteSubType | read-write | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.11 | ColumndialerIsdnNET3BChRemoteSub | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.12 | ColumndialerIsdnNET3BChCallType | read-only | mandatory | The current call type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.13 | ColumndialerIsdnNET3BChCallSpeed | read-write | mandatory | The current call speed. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.14 | ColumndialerIsdnNET3BChBChannel | read-only | mandatory | The current B Channel connected to. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.15 | ColumndialerIsdnNET3BChAnsEnable | read-only | mandatory | Answer enable status. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.16 | ColumndialerIsdnNET3BChTnsNetId | read-only | mandatory | The transit network id. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.17 | ColumndialerIsdnNET3BChTnsIdPlan | read-only | mandatory | The transit network plan. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.18 | ColumndialerIsdnNET3BChTnsDigs | read-write | mandatory | The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits a… |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.19 | ColumndialerIsdnNET3BChScrStatus | read-only | mandatory | The status of call screening. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.20 | ColumndialerIsdnNET3BChCallOpt | read-only | mandatory | The current call option. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.21 | ColumndialerIsdnNET3BChCcState | read-only | mandatory | The state of call control subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.22 | ColumndialerIsdnNET3BChCcNbCause | read-only | mandatory | The number of causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.23 | ColumndialerIsdnNET3BChCcCause | read-only | mandatory | Last causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.24 | ColumndialerIsdnNET3BChL3State | read-only | mandatory | The state of layer 3 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.25 | ColumndialerIsdnNET3BChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.26 | ColumndialerIsdnNET3BChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.27 | ColumndialerIsdnNET3BChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.28 | ColumndialerIsdnNET3BChStoDefined | read-only | mandatory | The validity of sto- elements. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.29 | ColumndialerIsdnNET3BChStoDnType | read-only | mandatory | The stored directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.30 | ColumndialerIsdnNET3BChStoDnPlan | read-only | mandatory | The stored directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.31 | ColumndialerIsdnNET3BChStoDn | read-only | mandatory | The stored directory number. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.32 | ColumndialerIsdnNET3BChStoSubType | read-only | mandatory | The stored subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.33 | ColumndialerIsdnNET3BChStoSub | read-only | mandatory | The stored subaddress. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.34 | ColumndialerIsdnNET3BChStoTnsNetId | read-only | mandatory | The stored transit network id. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.35 | ColumndialerIsdnNET3BChStoTnsPlan | read-only | mandatory | The stored transit network plan. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.36 | ColumndialerIsdnNET3BChStoDigs | read-only | mandatory | The stored transit network address. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.37 | ColumndialerIsdnNET3BChStoBcType | read-only | mandatory | The stored bearer cap. type. |
| 1.3.6.1.4.1.434.2.2.4.16.17.1.38 | ColumndialerIsdnNET3BChStoBcOpt | read-only | mandatory | The stored bearer cap. option. |
| 1.3.6.1.4.1.434.2.2.4.16.18 | TabledialerIsdnTPHBChTable | not-accessible | mandatory | The table for the ISDN TPH BChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1 | RowdialerIsdnTPHBChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.1 | ColumndialerIsdnTPHBChPortRef | read-only | mandatory | The port number for which the TPH BChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.2 | ColumndialerIsdnTPHBChLocalDnType | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.3 | ColumndialerIsdnTPHBChLocalDnPlan | read-only | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.4 | ColumndialerIsdnTPHBChLocalDn | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.5 | ColumndialerIsdnTPHBChLocalSubType | read-only | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.6 | ColumndialerIsdnTPHBChLocalSub | read-only | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.7 | ColumndialerIsdnTPHBChRemoteDnType | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.8 | ColumndialerIsdnTPHBChRemoteDnPlan | read-write | mandatory | The local directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.9 | ColumndialerIsdnTPHBChRemoteDn | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.10 | ColumndialerIsdnTPHBChRemoteSubType | read-write | mandatory | The local subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.11 | ColumndialerIsdnTPHBChRemoteSub | read-write | mandatory | The local directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.12 | ColumndialerIsdnTPHBChCallType | read-only | mandatory | The current call type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.13 | ColumndialerIsdnTPHBChCallSpeed | read-write | mandatory | The current call speed. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.14 | ColumndialerIsdnTPHBChBChannel | read-only | mandatory | The current B Channel connected to. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.15 | ColumndialerIsdnTPHBChAnsEnable | read-only | mandatory | Answer enable status. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.16 | ColumndialerIsdnTPHBChScrStatus | read-only | mandatory | The status of call screening. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.17 | ColumndialerIsdnTPHBChCallOpt | read-only | mandatory | The current call option. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.18 | ColumndialerIsdnTPHBChCcState | read-only | mandatory | The state of call control subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.19 | ColumndialerIsdnTPHBChCcNbCause | read-only | mandatory | The number of causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.20 | ColumndialerIsdnTPHBChCcCause | read-only | mandatory | Last causes saved. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.21 | ColumndialerIsdnTPHBChL3State | read-only | mandatory | The state of layer 3 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.22 | ColumndialerIsdnTPHBChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.23 | ColumndialerIsdnTPHBChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.24 | ColumndialerIsdnTPHBChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.25 | ColumndialerIsdnTPHBChStoDefined | read-only | mandatory | The validity of sto- elements. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.26 | ColumndialerIsdnTPHBChStoDnType | read-only | mandatory | The stored directory number type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.27 | ColumndialerIsdnTPHBChStoDnPlan | read-only | mandatory | The stored directory number plan. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.28 | ColumndialerIsdnTPHBChStoDn | read-only | mandatory | The stored directory number. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.29 | ColumndialerIsdnTPHBChStoSubType | read-only | mandatory | The stored subaddress type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.30 | ColumndialerIsdnTPHBChStoSub | read-only | mandatory | The stored subaddress. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.31 | ColumndialerIsdnTPHBChStoBcType | read-only | mandatory | The stored bearer cap. type. |
| 1.3.6.1.4.1.434.2.2.4.16.18.1.32 | ColumndialerIsdnTPHBChStoBcOpt | read-only | mandatory | The stored bearer cap. option. |
| 1.3.6.1.4.1.434.2.2.4.16.19 | TabledialerIsdnTPHDChTable | not-accessible | mandatory | The table for the ISDN TPH DChannel dialer. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1 | RowdialerIsdnTPHDChEntry | not-accessible | mandatory | The set of attributes for one port. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1.1 | ColumndialerIsdnTPHDChPortRef | read-only | mandatory | The port number for which the TPH DChannel info is displayed. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1.2 | ColumndialerIsdnTPHDChTeiValue | read-only | mandatory | The static TEI value on the D Channel for data communications. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1.3 | ColumndialerIsdnTPHDChTeiStatus | read-only | mandatory | The status of TEI - always ASSIGNED. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1.4 | ColumndialerIsdnTPHDChL2State | read-only | mandatory | The state of layer 2 subsystem. |
| 1.3.6.1.4.1.434.2.2.4.16.19.1.5 | ColumndialerIsdnTPHDChP3State | read-only | mandatory | The current Packet layer state. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ActionState | INTEGER { done (1), failed (2), in-progress (3) } | ||
| ClockType | INTEGER { external (1), internal (2), ext-dpll (3), int-dpll (4) } | ||
| DataEncoding | INTEGER { nrz (1), nrzi (2), fm0 (3), fm1 (4) } | ||
| DisEnable | INTEGER { disable (1), enable (2) } | ||
| FalseTrue | INTEGER { false (1), true (2) } | ||
| IsdnActState | INTEGER { deactivated (1), activating (2), active (3), call-failed (4), activ-failed (5), illegal (6) } | ||
| IsdnAnsEnable | INTEGER { disabled (1), enabled (2), enabled-illegal (3) } | ||
| IsdnBChannels | INTEGER { b1-channel (1), b2-channel (2), illegal (3) } | ||
| IsdnCallOpt | INTEGER { opt (1), option (2), call-opt (3) } | ||
| IsdnCallSpeed | INTEGER { speed-56k (1), speed-64k (2), speed-illegal (3) } | ||
| IsdnCallType | INTEGER { circuit-switched (1), packet-switched (2), nailed-packet (3), circuit-spv (4), fax-3 (5), fax-4 (6), btx (7), teletex (8), videotex (9), illegal (10) } | ||
| IsdnDnPlan | INTEGER { unknown (1), isdn-numbering (2), data-numbering (3), private-net (4), telex-numbering (5), nat-numbering (6), illegal (7) } | ||
| IsdnDnType | INTEGER { unknown (1), international (2), national (3), net-specific (4), subscriber (5), abbreviated (6), illegal (7) } | ||
| IsdnL2State | INTEGER { null-state(1), tei-unassigned (2), assign-awaiting-tei (3), establish-awaiting-tei (4), tei-assigned (5), awaiting-established (6), awaiting-release (7), mutiple-frame-established (8), timer-recovery (9), illegal (10) } | ||
| IsdnL3State | INTEGER { null-state (1), call-init (2), overlap-sending (3), out-call-proc (4), call-delivered (5), undefined-state-5 (6), call-present (7), call-received (8), connect-request (9), in-call-proc (10), call-active (11), disconnect-request (12), disconnect-ind (13), undefined-state-13 (14), call-passive (15), suspend-request (16), undefined-state-16 (17), resume-request (18), undefined-state-18 (19), release-request (20), register-request (21), cancel-request (22), undefined-state-22 (23), undefined-state-23 (24), undefined-state-24 (25), overlap-receive (26), idle-state (27), establish-wait (28), asai-tr1-state (29), u10-hold-request (30), u10-transfer-request (31), u10-conference-request (32), u10-reconnect-request (33), u10-awaiting-disc (34), u10-call-on-hold (35), broadcast-state (36), illegal (37) } | ||
| IsdnNET3BCcState | INTEGER { null-state (1), idle (2), ringing (3), connecting (4), connected (5), lockout (6), offhook-releasing (7), onhook-releasing (8), originate (9), routingout (10), call-queued (11), bell-releasing (12), illegal (13) } | ||
| IsdnNI1BCcState | INTEGER { null-state (1), idle (2), ringing (3), connected (4), dialing (5), lockout (6), offhook-releasing (7), onhook-releasing (8), originate (9), routing (10), call-queued (11), illegal (12) } | ||
| IsdnP3State | INTEGER { closed (1), opening (2), opened (3), tei-establishment (4), sw-activation (5), activated (6), deactivated (7), closing (8), illegal (9) } | ||
| IsdnScrStatus | INTEGER { disabled (1), enabled (2), illegal (3) } | ||
| IsdnSpidStatus | INTEGER { uninit (1), init (2), blocked (3), illegal (4) } | ||
| IsdnStoDefined | INTEGER { stored (1) } | ||
| IsdnSubType | INTEGER { nsap (1), user-specified (2), osi (3), illegal (4) } | ||
| IsdnTeiStatus | INTEGER { unassigned (1), outstanding (2), assigned (3), illegal (4) } | ||
| IsdnTnsIdPlan | INTEGER { unknown (1), interlata (2), data (3), illegal (4) } | ||
| IsdnTnsNetId | INTEGER { user-specified (1), national (2), international (3), illegal (4) } | ||
| IsdnTPHBCcState | INTEGER { null-state (1), idle (2), ringing (3), connected (4), dialing (5), lockout (6), offhook-releasing (7), onhook-releasing (8), originate (9), routing (10), call-queued (11), illegal (12) } | ||
| IsdnTR6BCcState | INTEGER { null-state (1), idle (2), ringing (3), connecting (4), connected (5), lockout (6), offhook-releasing (7), onhook-releasing (8), originate (9), routing (10), call-queued (11), illegal (12) } | ||
| IsdnVN3BCcState | INTEGER { null-state (1), idle (2), ringing (3), connecting (4), connected (5), lockout (6), offhook-releasing (7), onhook-releasing (8), originate (9), routing (10), call-queued (11), illegal (12) } | ||
| OnOff | INTEGER { on (1), off (2) } | ||
| PortRef | INTEGER (1..48) | ||
| PrimBitRate | INTEGER { speed1200 (1), speed2400 (2), speed4800 (3), speed7200 (4), speed9600 (5), speed12000 (6), speed14400 (7), not-supported (8) } | ||
| PrimCfg | INTEGER { v22bis (1), v32 (2), v32tcm (3), v32bis (4), not-supported (5) } |