MIB Viewer

EKINOPS-Pm1001IM-MIB

586 objects
MIB for the Ekinops Pm1001IM hardware.
Imported Objects
EKINOPS-MIBEkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.20044.15IdentitymodulePm1001imMIB for the Ekinops Pm1001IM hardware.
1.3.6.1.4.1.20044.15.2Nodepm1001imalarms
1.3.6.1.4.1.20044.15.2.1Nodepm1001imAlmOther
1.3.6.1.4.1.20044.15.2.1.1Nodepm1001imAlmOtherNurg
1.3.6.1.4.1.20044.15.2.1.1.2Nodepm1001imAlmsynthAlm2
1.3.6.1.4.1.20044.15.2.1.1.2.1Scalarpm1001imAlmConfTableSaveread-onlycurrentPM configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> <Alar…
1.3.6.1.4.1.20044.15.2.1.1.2.2Scalarpm1001imAlmInvUploadread-onlycurrentInventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.1.1.2.3Scalarpm1001imAlmConfTableLoadread-onlycurrentPM configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> <Alarmtype> <Pola…
1.3.6.1.4.1.20044.15.2.1.1.2.4Scalarpm1001imAlmCorrelatOffread-onlycurrentNot used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.1.1.2.5Scalarpm1001imAlmMaintenanceOnread-onlycurrentMaintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> …
1.3.6.1.4.1.20044.15.2.1.2Nodepm1001imAlmOtherUrg
1.3.6.1.4.1.20044.15.2.1.2.194Nodepm1001imAlmmodInitFailLevel2
1.3.6.1.4.1.20044.15.2.1.2.194.1Scalarpm1001imAlmLedFailread-onlycurrentLed Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond…
1.3.6.1.4.1.20044.15.2.1.2.194.2Scalarpm1001imAlmNextColdBootForcedread-onlycurrentNext Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced …
1.3.6.1.4.1.20044.15.2.1.2.194.3Scalarpm1001imAlmBootUndoneread-onlycurrentBoot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO…
1.3.6.1.4.1.20044.15.2.1.2.194.4Scalarpm1001imAlmResetHwInitFailread-onlycurrentReset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly …
1.3.6.1.4.1.20044.15.2.1.2.194.5Scalarpm1001imAlmSwInitFailread-onlycurrentSW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi…
1.3.6.1.4.1.20044.15.2.1.2.195Nodepm1001imAlmmodInitFailLevel3
1.3.6.1.4.1.20044.15.2.1.2.195.1Scalarpm1001imAlmGwIdentFailread-onlycurrentGW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID…
1.3.6.1.4.1.20044.15.2.1.2.195.2Scalarpm1001imAlmObmTypeReadFailread-onlycurrentOBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty…
1.3.6.1.4.1.20044.15.2.1.2.195.3Scalarpm1001imAlmInitModuleFailread-onlycurrentInit Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <…
1.3.6.1.4.1.20044.15.2.1.2.195.5Scalarpm1001imAlmClientXfpInitFailread-onlycurrentClient XFP Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the client transceiver is correctly ini…
1.3.6.1.4.1.20044.15.2.1.2.195.7Scalarpm1001imAlmLineInitFailread-onlycurrentLine Init Fail :This OID indicates that the Line registers subset has not been correctly initialized <Help> This alarm indicates if the line port is correctly …
1.3.6.1.4.1.20044.15.2.1.2.195.9Scalarpm1001imAlmLine1InitFailread-onlycurrentLine1 Init Fail :This OID indicates that Line 1 registers subset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correctly…
1.3.6.1.4.1.20044.15.2.1.2.195.10Scalarpm1001imAlmLine2InitFailread-onlycurrentLine2 Init Fail :This OID indicates that Line 2 registers subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctly…
1.3.6.1.4.1.20044.15.2.1.2.195.11Scalarpm1001imAlmLine3InitFailread-onlycurrentLine3 Init Fail :This OID indicates that Line 3 registers subset has not been correctly initialized <Help> This alarm indicates if the line port 3 is correctly…
1.3.6.1.4.1.20044.15.2.1.2.195.12Scalarpm1001imAlmLine4InitFailread-onlycurrentLine4 Init Fail :This OID indicates that Line 4 registers subset has not been correctly initialized <Help> This alarm indicates if the line port 4 is correctly…
1.3.6.1.4.1.20044.15.2.1.3Nodepm1001imAlmOtherCrit
1.3.6.1.4.1.20044.15.2.1.3.0Nodepm1001imAlmsynthAlm0
1.3.6.1.4.1.20044.15.2.1.3.0.9Scalarpm1001imAlmModGlobFailread-onlycurrentModule Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.1.3.0.15Scalarpm1001imAlmDefFuseAread-onlycurrentFuse A fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb…
1.3.6.1.4.1.20044.15.2.1.3.0.16Scalarpm1001imAlmDefFuseBread-onlycurrentFuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb…
1.3.6.1.4.1.20044.15.2.2Nodepm1001imAlmClient
1.3.6.1.4.1.20044.15.2.2.1Nodepm1001imAlmClientNurg
1.3.6.1.4.1.20044.15.2.2.1.209Nodepm1001imAlmclientXfpWarnings
1.3.6.1.4.1.20044.15.2.2.1.209.1Scalarpm1001imAlmClientTxPowerLowWarningread-onlycurrentClient Optical Tx Power Low warning : <Condtype> CLIENT_TX_POWER_LOW_WARNING <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.2Scalarpm1001imAlmClientTxPowerHighWarningread-onlycurrentClient Optical Tx Power High warning : <Condtype> CLIENT_TX_POWER_HIGH_WARNING <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.3Scalarpm1001imAlmClientTxBiasLowWarningread-onlycurrentClient Transceiver Bias Low warning : <Condtype> CLIENT_TX_BIAS_LOW_WARNING <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.4Scalarpm1001imAlmClientTxBiasHighWarningread-onlycurrentClient Transceiver Bias High warning : <Condtype> CLIENT_TX_BIAS_HIGH_WARNING <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.7Scalarpm1001imAlmClientTempLowWarningread-onlycurrentClient Transceiver Temp Low warning : <Condtype> CLIENT_TEMP_LOW_WARNING <Probcause> temperatureUnacceptable (51) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.8Scalarpm1001imAlmClientTempHighWarningread-onlycurrentClient Transceiver Temp High warning : <Condtype> CLIENT_TEMP_HIGH_WARNING <Probcause> temperatureUnacceptable (51) <Alarmtype> equipmentAlarm (5) <Polarity> (…
1.3.6.1.4.1.20044.15.2.2.1.209.15Scalarpm1001imAlmClientRxPowerLowWarningread-onlycurrentClient Optical Rx Power Low warning : <Condtype> CLIENT_RX_POWER_LOW_WARNING <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.1.209.16Scalarpm1001imAlmClientRxPowerHighWarningread-onlycurrentClient Optical Rx Power High warning : <Condtype> CLIENT_RX_POWER_HIGH_WARNING <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2Nodepm1001imAlmClientUrg
1.3.6.1.4.1.20044.15.2.2.2.208Nodepm1001imAlmclientXfpAlarm1
1.3.6.1.4.1.20044.15.2.2.2.208.1Scalarpm1001imAlmClientTxPowerLowAlarmread-onlycurrentClient Optical Tx Power Low : <Condtype> CLIENT_TX_POWER_LOW_ALARM <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.2Scalarpm1001imAlmClientTxPowerHighAlarmread-onlycurrentClient Optical Tx Power High : <Condtype> CLIENT_TX_POWER_HIGH_ALARM <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.3Scalarpm1001imAlmClientTxBiasLowAlarmread-onlycurrentClient Transceiver Bias Low : <Condtype> CLIENT_TX_BIAS_LOW_ALARM <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.4Scalarpm1001imAlmClientTxBiasHighAlarmread-onlycurrentClient Transceiver Bias High : <Condtype> CLIENT_TX_BIAS_HIGH_ALARM <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.7Scalarpm1001imAlmClientTempLowAlarmread-onlycurrentClient Transceiver Temp Low : <Condtype> CLIENT_TEMP_LOW_ALARM <Probcause> temperatureUnacceptable (51) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.8Scalarpm1001imAlmClientTempHighAlarmread-onlycurrentClient Transceiver Temp High : <Condtype> CLIENT_TEMP_HIGH_ALARM <Probcause> temperatureUnacceptable (51) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.15Scalarpm1001imAlmClientRxPowerLowAlarmread-onlycurrentClient Optical Rx Power Low : <Condtype> CLIENT_RX_POWER_LOW_ALARM <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.208.16Scalarpm1001imAlmClientRxPowerHighAlarmread-onlycurrentClient Optical Rx Power High : <Condtype> CLIENT_RX_POWER_HIGH_ALARM <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212Nodepm1001imAlmclientXfpSupplyAlarm
1.3.6.1.4.1.20044.15.2.2.2.212.1Scalarpm1001imAlmClientVee5LowAlarmread-onlycurrentVEE5 Power Supply Low : <Condtype> CLIENT_VEE5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.2Scalarpm1001imAlmClientVee5HighAlarmread-onlycurrentVEE5 Power Supply High : <Condtype> CLIENT_VEE5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.3Scalarpm1001imAlmClientVcc2LowAlarmread-onlycurrentVCC2 Power Supply Low : <Condtype> CLIENT_VCC2_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.4Scalarpm1001imAlmClientVcc2HighAlarmread-onlycurrentVCC2 Power Supply High : <Condtype> CLIENT_VCC2_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.5Scalarpm1001imAlmClientVcc3LowAlarmread-onlycurrentVCC3 Power Supply Low : <Condtype> CLIENT_VCC3_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.6Scalarpm1001imAlmClientVcc3HighAlarmread-onlycurrentVCC3 Power Supply High : <Condtype> CLIENT_VCC3_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.7Scalarpm1001imAlmClientVcc5LowAlarmread-onlycurrentVCC5 Power Supply Low : <Condtype> CLIENT_VCC5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.8Scalarpm1001imAlmClientVcc5HighAlarmread-onlycurrentVCC5 Power Supply High : <Condtype> CLIENT_VCC5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.9Scalarpm1001imAlmClientVee5LowWarningread-onlycurrentVEE5 Power Supply Low Warning : <Condtype> CLIENT_VEE5_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.10Scalarpm1001imAlmClientVee5HighWarningread-onlycurrentVEE5 Power Supply High Warning : <Condtype> CLIENT_VEE5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.11Scalarpm1001imAlmClientVcc2LowWarningread-onlycurrentVCC2 Power Supply Low Warning : <Condtype> CLIENT_VCC2_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.12Scalarpm1001imAlmClientVcc2HighWarningread-onlycurrentVCC2 Power Supply High Warning : <Condtype> CLIENT_VCC2_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.13Scalarpm1001imAlmClientVcc3LowWarningread-onlycurrentVCC3 Power Supply Low Warning : <Condtype> CLIENT_VCC3_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.14Scalarpm1001imAlmClientVcc3HighWarningread-onlycurrentVCC3 Power Supply High Warning : <Condtype> CLIENT_VCC3_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.15Scalarpm1001imAlmClientVcc5LowWarningread-onlycurrentVCC5 Power Supply Low Warning : <Condtype> CLIENT_VCC5_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.2.212.16Scalarpm1001imAlmClientVcc5HighWarningread-onlycurrentVCC5 Power Supply High Warning : <Condtype> CLIENT_VCC5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.3Nodepm1001imAlmClientCrit
1.3.6.1.4.1.20044.15.2.2.3.7Nodepm1001imAlmsynthAlmClient
1.3.6.1.4.1.20044.15.2.2.3.7.1Scalarpm1001imAlmClientXfpAbsentread-onlycurrentClient XFP not plugged :This OID indicates that the XFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is pres…
1.3.6.1.4.1.20044.15.2.2.3.7.2Scalarpm1001imAlmClientDdmAbsentread-onlycurrentClient Optical Module ready :This OID indicates that the client optical interface (XFP or OTX) is not operational. <Help> This status indicates if the client t…
1.3.6.1.4.1.20044.15.2.2.3.7.4Scalarpm1001imAlmClientHwFailread-onlycurrentClient HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL <Probcause> <Alarmtype> <Polarity> (…
1.3.6.1.4.1.20044.15.2.2.3.7.5Scalarpm1001imAlmClientDwLsdread-onlycurrentClient XFP optical TX ON :This OID indicates the Client XFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OFF…
1.3.6.1.4.1.20044.15.2.2.3.7.6Scalarpm1001imAlmClientLocalOos0read-onlycurrentLocal Client port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c…
1.3.6.1.4.1.20044.15.2.2.3.7.7Scalarpm1001imAlmClientRemoteOos0read-onlycurrentRemote Client port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot…
1.3.6.1.4.1.20044.15.2.2.3.7.8Scalarpm1001imAlmClientDwCaisread-onlycurrentClient AIS inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is…
1.3.6.1.4.1.20044.15.2.2.3.7.9Scalarpm1001imAlmClientSfpDdmWarningread-onlycurrentWarning on Client XFP DDM :This OID indicates a warning is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Warning has been detecte…
1.3.6.1.4.1.20044.15.2.2.3.7.10Scalarpm1001imAlmClientSfpDdmAlmread-onlycurrentAlarm on Client XFP DDM :This OID indicates an alarm is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on …
1.3.6.1.4.1.20044.15.2.2.3.7.12Scalarpm1001imAlmClientFailread-onlycurrentClient Access Fail :This OID indicates a failure on the Client port <Condtype> CLIENT_FAIL <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.2.3.7.16Scalarpm1001imAlmClientUpCsfread-onlycurrentClient Signal Fail inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu…
1.3.6.1.4.1.20044.15.2.2.3.168Nodepm1001imAlmclientAccessioAlm
1.3.6.1.4.1.20044.15.2.2.3.168.1Scalarpm1001imAlmClientDwLasFailread-onlycurrentClient XFP Tx Failed :This OID indicates that the transmitter fails for the XFP plugged into the client port (this alarm reports the transmitter failure alarm …
1.3.6.1.4.1.20044.15.2.2.3.168.4Scalarpm1001imAlmClientUpLosread-onlycurrentLoss of Optical signal on Client :This OID indicates that no signal is present on the XFP of the client port <Help> This alarm indicates if an optical signal i…
1.3.6.1.4.1.20044.15.2.2.3.169Nodepm1001imAlmclientMapperDeAlm
1.3.6.1.4.1.20044.15.2.2.3.169.1Scalarpm1001imAlmClientUpAccOosread-onlycurrentClient Loss of Synchronisation :This OID indicates the upstream client input port has lost synchronization on its 10B/8B decoder <Help> This alarms indicates i…
1.3.6.1.4.1.20044.15.2.2.3.169.10Scalarpm1001imAlmClientUpBufferOvlread-onlycurrentClient Upstream buffer overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Condtype> CLIENT_UP_BUFFER_OVL <Probcause>…
1.3.6.1.4.1.20044.15.2.2.3.169.11Scalarpm1001imAlmClientDwCsfDetread-onlycurrentClient Signal Fail detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client…
1.3.6.1.4.1.20044.15.2.2.3.169.14Scalarpm1001imAlmClientDwBufferOvlread-onlycurrentClient Downstream buffer overload :This OID indicates that the de-mapper buffer for client port is in overload. <Condtype> CLIENT_DW_BUFFER_OVL <Probcause> equ…
1.3.6.1.4.1.20044.15.2.2.3.211Nodepm1001imAlmclientXfpAlarms2
1.3.6.1.4.1.20044.15.2.2.3.211.2Scalarpm1001imAlmClientModNrread-onlycurrentClient Optical Module not ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the Client transceiver …
1.3.6.1.4.1.20044.15.2.2.3.211.3Scalarpm1001imAlmClientRxCdrNotLocked1read-onlycurrentClient Optical Rx CDR unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is…
1.3.6.1.4.1.20044.15.2.2.3.211.5Scalarpm1001imAlmClientRxNrread-onlycurrentClient Optical Rx not ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the R…
1.3.6.1.4.1.20044.15.2.2.3.211.6Scalarpm1001imAlmClientTxCdrNotLocked1read-onlycurrentClient Optical Tx CDR unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is …
1.3.6.1.4.1.20044.15.2.2.3.211.7Scalarpm1001imAlmClientTxFaultread-onlycurrentClient Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the Clien…
1.3.6.1.4.1.20044.15.2.2.3.211.8Scalarpm1001imAlmClientTxNrread-onlycurrentClient Optical Tx not ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx p…
1.3.6.1.4.1.20044.15.2.2.3.211.14Scalarpm1001imAlmClientWavelengthUnlockedread-onlycurrentClient Optical Tx Wavelength unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the …
1.3.6.1.4.1.20044.15.2.2.3.211.15Scalarpm1001imAlmClientTecFaultread-onlycurrentClient Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the Client transceiver is in fail…
1.3.6.1.4.1.20044.15.2.2.3.211.16Scalarpm1001imAlmClientApdSupplyFaultread-onlycurrentClient Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail conditio…
1.3.6.1.4.1.20044.15.2.3Nodepm1001imAlmLine
1.3.6.1.4.1.20044.15.2.3.1Nodepm1001imAlmLineNurg
1.3.6.1.4.1.20044.15.2.3.1.48Tablepm1001imAlmlineSfpWarnDdmTablenot-accessiblecurrentList of pm1001imAlmlineSfpWarnDdm Article
1.3.6.1.4.1.20044.15.2.3.1.48.1Rowpm1001imAlmlineSfpWarnDdmEntrynot-accessiblecurrentRow definition for the pm1001imAlmlineSfpWarnDdm table
1.3.6.1.4.1.20044.15.2.3.1.48.1.1Columnpm1001imAlmlineSfpWarnDdmIndexread-onlycurrentIndex definition for the pm1001imAlmlineSfpWarnDdm table
1.3.6.1.4.1.20044.15.2.3.1.48.1.2Columnpm1001imAlmLineTxPwrLowWngPortnread-onlycurrentLine SFP Tx Power Low warning :Warning indicating that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE…
1.3.6.1.4.1.20044.15.2.3.1.48.1.3Columnpm1001imAlmLineTxPwrHighWngPortnread-onlycurrentLine SFP Tx Power High warning :Warning indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LI…
1.3.6.1.4.1.20044.15.2.3.1.48.1.4Columnpm1001imAlmLineTxBiasLowWngPortnread-onlycurrentLine SFP Bias Low warning :Warning indicating that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LI…
1.3.6.1.4.1.20044.15.2.3.1.48.1.5Columnpm1001imAlmLineTxBiasHighWngPortnread-onlycurrentLine SFP Bias High warning :Warning indicating that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> …
1.3.6.1.4.1.20044.15.2.3.1.48.1.6Columnpm1001imAlmLineVccLowWngPortnread-onlycurrentLine SFP Power Supply Low warning :Warning indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> …
1.3.6.1.4.1.20044.15.2.3.1.48.1.7Columnpm1001imAlmLineVccHighWngPortnread-onlycurrentLine SFP Power Supply High warning :Warning indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype…
1.3.6.1.4.1.20044.15.2.3.1.48.1.8Columnpm1001imAlmLineTempLowWngPortnread-onlycurrentLine SFP Temp Low warning :Warning indicating that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP…
1.3.6.1.4.1.20044.15.2.3.1.48.1.9Columnpm1001imAlmLineTempHighWngPortnread-onlycurrentLine SFP Temp High warning :Warning indicating that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TE…
1.3.6.1.4.1.20044.15.2.3.1.48.1.16Columnpm1001imAlmLineRxPwrLowWngPortnread-onlycurrentLine SFP Rx Power Low warning :Warning indicating that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_…
1.3.6.1.4.1.20044.15.2.3.1.48.1.17Columnpm1001imAlmLineRxPwrHighWngPortnread-onlycurrentLine SFP Rx Power High warning :Warning indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LIN…
1.3.6.1.4.1.20044.15.2.3.1.130Scalarpm1001imAlmlineDownS1Line1read-onlycurrentLine S1 Extracted Value :This OID gives the value of S1 extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> DW_S1_8 <Probcause> <Alarm…
1.3.6.1.4.1.20044.15.2.3.1.131Scalarpm1001imAlmlineDownK1Line1read-onlycurrentLine K1 Extracted Value :This OID gives the value of K1 extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> DW_K1_8 <Probcause> <Alarm…
1.3.6.1.4.1.20044.15.2.3.1.132Scalarpm1001imAlmlineDownK2Line1read-onlycurrentLine K2 Extracted Value :This OID gives the value of K2 extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> DW_K2_8 <Probcause> <Alarm…
1.3.6.1.4.1.20044.15.2.3.2Nodepm1001imAlmLineUrg
1.3.6.1.4.1.20044.15.2.3.2.32Tablepm1001imAlmlineSfpAlmDdmTablenot-accessiblecurrentList of pm1001imAlmlineSfpAlmDdm Article
1.3.6.1.4.1.20044.15.2.3.2.32.1Rowpm1001imAlmlineSfpAlmDdmEntrynot-accessiblecurrentRow definition for the pm1001imAlmlineSfpAlmDdm table
1.3.6.1.4.1.20044.15.2.3.2.32.1.1Columnpm1001imAlmlineSfpAlmDdmIndexread-onlycurrentIndex definition for the pm1001imAlmlineSfpAlmDdm table
1.3.6.1.4.1.20044.15.2.3.2.32.1.2Columnpm1001imAlmLineTxPwrLowAlaPortnread-onlycurrentLine SFP Tx Power Low :Alarm indicating that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_LO…
1.3.6.1.4.1.20044.15.2.3.2.32.1.3Columnpm1001imAlmLineTxPwrHighAlaPortnread-onlycurrentLine SFP Tx Power High :Alarm indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_…
1.3.6.1.4.1.20044.15.2.3.2.32.1.4Columnpm1001imAlmLineTxBiasLowAlaPortnread-onlycurrentLine SFP Bias Low :Alarm indicating that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS…
1.3.6.1.4.1.20044.15.2.3.2.32.1.5Columnpm1001imAlmLineTxBiasHighAlaPortnread-onlycurrentLine SFP Bias High :Alarm indicating that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BI…
1.3.6.1.4.1.20044.15.2.3.2.32.1.6Columnpm1001imAlmLineVccLowAlaPortnread-onlycurrentLine SFP Power Supply Low :Alarm indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_L…
1.3.6.1.4.1.20044.15.2.3.2.32.1.7Columnpm1001imAlmLineVccHighAlaPortnread-onlycurrentLine SFP Power Supply High :Alarm indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC…
1.3.6.1.4.1.20044.15.2.3.2.32.1.8Columnpm1001imAlmLineTempLowAlaPortnread-onlycurrentLine SFP Temp Low :Alarm indicating that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_LOW_ALA_1…
1.3.6.1.4.1.20044.15.2.3.2.32.1.9Columnpm1001imAlmLineTempHighAlaPortnread-onlycurrentLine SFP Temp High :Alarm indicating that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_HIGH_AL…
1.3.6.1.4.1.20044.15.2.3.2.32.1.16Columnpm1001imAlmLineRxPwrLowAlaPortnread-onlycurrentLine SFP Rx Power Low :Alarm indicating that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_LOW…
1.3.6.1.4.1.20044.15.2.3.2.32.1.17Columnpm1001imAlmLineRxPwrHighAlaPortnread-onlycurrentLine SFP Rx Power High :Alarm indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_H…
1.3.6.1.4.1.20044.15.2.3.2.129Nodepm1001imAlmlineDfrmBer1
1.3.6.1.4.1.20044.15.2.3.2.129.1Scalarpm1001imAlmLineSignalDegrade1read-onlycurrentCustom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA…
1.3.6.1.4.1.20044.15.2.3.2.129.2Scalarpm1001imAlmLineSignalFail1read-onlycurrentCustom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F…
1.3.6.1.4.1.20044.15.2.3.2.129.5Scalarpm1001imAlmLineDegrade1read-onlycurrentFixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio…
1.3.6.1.4.1.20044.15.2.3.3Nodepm1001imAlmLineCrit
1.3.6.1.4.1.20044.15.2.3.3.8Tablepm1001imAlmsynthAlmLineTablenot-accessiblecurrentList of pm1001imAlmsynthAlmLine Article
1.3.6.1.4.1.20044.15.2.3.3.8.1Rowpm1001imAlmsynthAlmLineEntrynot-accessiblecurrentRow definition for the pm1001imAlmsynthAlmLine table
1.3.6.1.4.1.20044.15.2.3.3.8.1.1Columnpm1001imAlmsynthAlmLineIndexread-onlycurrentIndex definition for the pm1001imAlmsynthAlmLine table
1.3.6.1.4.1.20044.15.2.3.3.8.1.2Columnpm1001imAlmLineSfpAbsentPortnread-onlycurrentLine SFP present :This OID indicates that the SFP module is not present in the Line port. <Help> This alarm indicates if the line transceiver is present. <Cond…
1.3.6.1.4.1.20044.15.2.3.3.8.1.3Columnpm1001imAlmLineDdmAbsentPortnread-onlycurrentDDM supported on Line SFP :This OID indicates that the Line SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if the …
1.3.6.1.4.1.20044.15.2.3.3.8.1.5Columnpm1001imAlmLineHwFailPortnread-onlycurrentLine HW Fail :This OID indicates a failure on Line port, most probably caused by a HW issue. <Condtype> LINE_HW_FAIL_1 <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.3.3.8.1.6Columnpm1001imAlmLineUpLsdPortnread-onlycurrentLine SFP optical TX ON :This OID indicates the Line SFP transmitter output is ON. <Help> This status indicates if the line transceiver laser is ON or OFF <Cond…
1.3.6.1.4.1.20044.15.2.3.3.8.1.7Columnpm1001imAlmLineLocalOosPortnread-onlycurrentLine port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service…
1.3.6.1.4.1.20044.15.2.3.3.8.1.9Columnpm1001imAlmLineUpRdiInsPortnread-onlycurrentMS-RDI/L-RDI inserted on Line :This OID indicates an upstream RDI has been inserted in the outgoing 10 Gb/s signal. <Help> This status indicates if a MS-RDI/L-…
1.3.6.1.4.1.20044.15.2.3.3.8.1.10Columnpm1001imAlmLineSfpDdmWarningPortnread-onlycurrentWarning on Line SFP DDM :This OID indicates a warning is being received from the Line SFP DDM <Help> This alarm indicates if a DDM Warning has been detected on…
1.3.6.1.4.1.20044.15.2.3.3.8.1.11Columnpm1001imAlmLineSfpDdmAlmPortnread-onlycurrentAlarm on Line SFP DDM :This OID indicates an alarm is being received from the Line SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on the …
1.3.6.1.4.1.20044.15.2.3.3.8.1.13Columnpm1001imAlmLineFailPortnread-onlycurrentLine Access Fail :This OID indicates a failure on the Line port <Condtype> LINE_FAIL_1 <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.2.3.3.16Tablepm1001imAlmlineAlmTablenot-accessiblecurrentList of pm1001imAlmlineAlm Article
1.3.6.1.4.1.20044.15.2.3.3.16.1Rowpm1001imAlmlineAlmEntrynot-accessiblecurrentRow definition for the pm1001imAlmlineAlm table
1.3.6.1.4.1.20044.15.2.3.3.16.1.1Columnpm1001imAlmlineAlmIndexread-onlycurrentIndex definition for the pm1001imAlmlineAlm table
1.3.6.1.4.1.20044.15.2.3.3.16.1.2Columnpm1001imAlmLineDwLasFailPortnread-onlycurrentLine SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the Line (this alarm reports the transmitter failure alarm generated…
1.3.6.1.4.1.20044.15.2.3.3.16.1.5Columnpm1001imAlmLineUpLosPortnread-onlycurrentLine input Loss of Signal :This OID indicates that no signal is present on the SFP of the Line <Help> This alarm indicates if an optical signal is detected on …
1.3.6.1.4.1.20044.15.2.3.3.72Tablepm1001imAlmlineMapperDeAlmTablenot-accessiblecurrentList of pm1001imAlmlineMapperDeAlm Article
1.3.6.1.4.1.20044.15.2.3.3.72.1Rowpm1001imAlmlineMapperDeAlmEntrynot-accessiblecurrentRow definition for the pm1001imAlmlineMapperDeAlm table
1.3.6.1.4.1.20044.15.2.3.3.72.1.1Columnpm1001imAlmlineMapperDeAlmIndexread-onlycurrentIndex definition for the pm1001imAlmlineMapperDeAlm table
1.3.6.1.4.1.20044.15.2.3.3.72.1.2Columnpm1001imAlmLineDwLofPortnread-onlycurrentLine Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on incoming input signal <Help> This alarm indicates if there is a Loss of Frame …
1.3.6.1.4.1.20044.15.2.3.3.72.1.7Columnpm1001imAlmLineB1IndicPortnread-onlycurrentBIP Errors :This OID indicates the downstream Line input has detected errors <Help> This alarm indicates if some BIP errors has been detected on the line input…
1.3.6.1.4.1.20044.15.2.3.3.72.1.16Columnpm1001imAlmLineLoopFifoFailPortnread-onlycurrentLine loop FIFO failure :active only in client loopback mode. <Condtype> LINE_LOOP_FIFO_FAIL_1 <Probcause> inputOutputDeviceError (24) <Alarmtype> equipmentAlar…
1.3.6.1.4.1.20044.15.2.3.3.128Nodepm1001imAlmlineDfrmAlm1
1.3.6.1.4.1.20044.15.2.3.3.128.1Scalarpm1001imAlmDwAisDet1read-onlycurrentMS-AIS/L-AIS detected on line input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Condtype> DW_AIS_DET_1 <Probc…
1.3.6.1.4.1.20044.15.2.3.3.128.2Scalarpm1001imAlmDwRdiDet1read-onlycurrentMS-RDI/L-RDI detected on line input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Condtype> DW_RDI_DET_1 <Probc…
1.3.6.1.4.1.20044.15.2.3.3.128.3Scalarpm1001imAlmDwOof1read-onlycurrentSONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Condtype> DW_OOF_1 <Probcause> …
1.3.6.1.4.1.20044.15.2.3.3.128.4Scalarpm1001imAlmDwLof1read-onlycurrentSONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if …
1.3.6.1.4.1.20044.15.2.3.3.133Nodepm1001imAlmlineSyncAlarms1
1.3.6.1.4.1.20044.15.2.3.3.133.12Scalarpm1001imAlmDwLockerrread-onlycurrentDownstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> <Alarmtype>…
1.3.6.1.4.1.20044.15.2.3.3.133.13Scalarpm1001imAlmUpLockerrread-onlycurrentUpstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> <Alarmt…
1.3.6.1.4.1.20044.15.2.3.3.133.16Scalarpm1001imAlmDwLosread-onlycurrentLine input Loss of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Condtype> DW_LOS <Probcause> <Alarmtype> <Polarity> (2)
1.3.6.1.4.1.20044.15.3Nodepm1001immeasures
1.3.6.1.4.1.20044.15.3.1Nodepm1001imMesrOther
1.3.6.1.4.1.20044.15.3.1.0Scalarpm1001imMesrsynth0read-onlydeprecatedNot used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = )
1.3.6.1.4.1.20044.15.3.1.1Scalarpm1001imMesrsynth1read-onlydeprecatedNot used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = )
1.3.6.1.4.1.20044.15.3.2Nodepm1001imMesrClient
1.3.6.1.4.1.20044.15.3.2.208Scalarpm1001imMesrclientModTempMeasread-onlycurrentClient XFP Temperature :This OID gives the temperature of the XFP or OTX plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2…
1.3.6.1.4.1.20044.15.3.2.209Scalarpm1001imMesrclientReservedread-onlydeprecatedNot used :Reserved
1.3.6.1.4.1.20044.15.3.2.210Scalarpm1001imMesrclientBiasCurrentMeasread-onlycurrentClient XFP Laser Bias :This OID gives the bias value of the XFP or OTX plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit…
1.3.6.1.4.1.20044.15.3.2.211Scalarpm1001imMesrclientTxPowerMeasread-onlycurrentClient XFP Transmitted Power :This OID gives the transmit power value of the XFP or OTX plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Pow…
1.3.6.1.4.1.20044.15.3.2.212Scalarpm1001imMesrclientRxPowerMeasread-onlycurrentClient XFP Received Power :This OID gives the receive power value of the XFP or OTX plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Power =…
1.3.6.1.4.1.20044.15.3.2.213Scalarpm1001imMesrclientAux1Measread-onlydeprecatedNot used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in port (Unit = ?)
1.3.6.1.4.1.20044.15.3.2.214Scalarpm1001imMesrclientAux2Measread-onlydeprecatedNot used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in port (Unit = ?)
1.3.6.1.4.1.20044.15.3.3Nodepm1001imMesrLine
1.3.6.1.4.1.20044.15.3.3.16Tablepm1001imMesrlineTempMeasTablenot-accessiblecurrentList of pm1001imMesrlineTempMeas Article
1.3.6.1.4.1.20044.15.3.3.16.1Rowpm1001imMesrlineTempMeasEntrynot-accessiblecurrentRow definition for the pm1001imMesrlineTempMeas table
1.3.6.1.4.1.20044.15.3.3.16.1.1Columnpm1001imMesrlineTempMeasIndexread-onlycurrentIndex definition for the pm1001imMesrlineTempMeas table
1.3.6.1.4.1.20044.15.3.3.16.1.2Columnpm1001imMesrlineTempMeasPortnread-onlycurrentLine SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256)…
1.3.6.1.4.1.20044.15.3.3.24Tablepm1001imMesrlineVoltMeasTablenot-accessiblecurrentList of pm1001imMesrlineVoltMeas Article
1.3.6.1.4.1.20044.15.3.3.24.1Rowpm1001imMesrlineVoltMeasEntrynot-accessiblecurrentRow definition for the pm1001imMesrlineVoltMeas table
1.3.6.1.4.1.20044.15.3.3.24.1.1Columnpm1001imMesrlineVoltMeasIndexread-onlycurrentIndex definition for the pm1001imMesrlineVoltMeas table
1.3.6.1.4.1.20044.15.3.3.24.1.2Columnpm1001imMesrlineVoltMeasPortnread-onlycurrentLine SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000…
1.3.6.1.4.1.20044.15.3.3.32Tablepm1001imMesrlineBiasMeasTablenot-accessiblecurrentList of pm1001imMesrlineBiasMeas Article
1.3.6.1.4.1.20044.15.3.3.32.1Rowpm1001imMesrlineBiasMeasEntrynot-accessiblecurrentRow definition for the pm1001imMesrlineBiasMeas table
1.3.6.1.4.1.20044.15.3.3.32.1.1Columnpm1001imMesrlineBiasMeasIndexread-onlycurrentIndex definition for the pm1001imMesrlineBiasMeas table
1.3.6.1.4.1.20044.15.3.3.32.1.2Columnpm1001imMesrlineBiasMeasPortnread-onlycurrentLine SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) …
1.3.6.1.4.1.20044.15.3.3.40Tablepm1001imMesrlineTxpwrMeasTablenot-accessiblecurrentList of pm1001imMesrlineTxpwrMeas Article
1.3.6.1.4.1.20044.15.3.3.40.1Rowpm1001imMesrlineTxpwrMeasEntrynot-accessiblecurrentRow definition for the pm1001imMesrlineTxpwrMeas table
1.3.6.1.4.1.20044.15.3.3.40.1.1Columnpm1001imMesrlineTxpwrMeasIndexread-onlycurrentIndex definition for the pm1001imMesrlineTxpwrMeas table
1.3.6.1.4.1.20044.15.3.3.40.1.2Columnpm1001imMesrlineTxpwrMeasPortnread-onlycurrentLine SFP Transmitted Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10…
1.3.6.1.4.1.20044.15.3.3.48Tablepm1001imMesrlineRxpwrMeasTablenot-accessiblecurrentList of pm1001imMesrlineRxpwrMeas Article
1.3.6.1.4.1.20044.15.3.3.48.1Rowpm1001imMesrlineRxpwrMeasEntrynot-accessiblecurrentRow definition for the pm1001imMesrlineRxpwrMeas table
1.3.6.1.4.1.20044.15.3.3.48.1.1Columnpm1001imMesrlineRxpwrMeasIndexread-onlycurrentIndex definition for the pm1001imMesrlineRxpwrMeas table
1.3.6.1.4.1.20044.15.3.3.48.1.2Columnpm1001imMesrlineRxpwrMeasPortnread-onlycurrentLine SFP Received Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(A…
1.3.6.1.4.1.20044.15.4Nodepm1001imcounters
1.3.6.1.4.1.20044.15.4.1Nodepm1001imCntOther
1.3.6.1.4.1.20044.15.4.2Nodepm1001imCntClient
1.3.6.1.4.1.20044.15.4.2.210Tablepm1001imCntclientUpErrCntTablenot-accessiblecurrentList of pm1001imCntclientUpErrCnt Article
1.3.6.1.4.1.20044.15.4.2.210.1Rowpm1001imCntclientUpErrCntEntrynot-accessiblecurrentRow definition for the pm1001imCntclientUpErrCnt table
1.3.6.1.4.1.20044.15.4.2.210.1.1Columnpm1001imCntclientUpErrCntIndexread-onlycurrentIndex definition for the pm1001imCntclientUpErrCnt table
1.3.6.1.4.1.20044.15.4.2.210.1.2Columnpm1001imCntclientUpErrCntValuePortnread-onlycurrentClient B1 input counter :This counter is incremented each time a B1 error is detected on the client input stream <Help> This counter gives the number of B1 err…
1.3.6.1.4.1.20044.15.4.2.210.1.3Columnpm1001imCntclientUpErrCntErrorPortnread-onlycurrentClient counter error :This OID when set indicates the FCS error counter value is invalid on input Port
1.3.6.1.4.1.20044.15.4.2.210.1.4Columnpm1001imCntclientUpErrCntOverloadPortnread-onlycurrentClient counter overload :This OID when set indicates a FCS error counter overload on input Port
1.3.6.1.4.1.20044.15.4.2.211Tablepm1001imCntclientUpTimCntTablenot-accessiblecurrentList of pm1001imCntclientUpTimCnt Article
1.3.6.1.4.1.20044.15.4.2.211.1Rowpm1001imCntclientUpTimCntEntrynot-accessiblecurrentRow definition for the pm1001imCntclientUpTimCnt table
1.3.6.1.4.1.20044.15.4.2.211.1.1Columnpm1001imCntclientUpTimCntIndexread-onlycurrentIndex definition for the pm1001imCntclientUpTimCnt table
1.3.6.1.4.1.20044.15.4.2.211.1.2Columnpm1001imCntclientUpTimCntValuePortnread-onlycurrentClient upstream timer counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.15.4.2.211.1.3Columnpm1001imCntclientUpTimCntErrorPortnread-onlycurrentClient counter error :This OID when set indicates the upstream timing counter value is invalid on Port
1.3.6.1.4.1.20044.15.4.2.211.1.4Columnpm1001imCntclientUpTimCntOverloadPortnread-onlycurrentClient counter overload :This OID when set indicates a upstream timing counter overload on Port
1.3.6.1.4.1.20044.15.4.2.213Tablepm1001imCntclientDwErrCntTablenot-accessiblecurrentList of pm1001imCntclientDwErrCnt Article
1.3.6.1.4.1.20044.15.4.2.213.1Rowpm1001imCntclientDwErrCntEntrynot-accessiblecurrentRow definition for the pm1001imCntclientDwErrCnt table
1.3.6.1.4.1.20044.15.4.2.213.1.1Columnpm1001imCntclientDwErrCntIndexread-onlycurrentIndex definition for the pm1001imCntclientDwErrCnt table
1.3.6.1.4.1.20044.15.4.2.213.1.2Columnpm1001imCntclientDwErrCntValuePortnread-onlycurrentClient B1 output counter :This counter is incremented each time a B1 error is detected on the client output stream <Help> This counter gives the number of B1 e…
1.3.6.1.4.1.20044.15.4.2.213.1.3Columnpm1001imCntclientDwErrCntErrorPortnread-onlycurrentClient counter error :This OID when set indicates the FCS error counter value is invalid on output Port
1.3.6.1.4.1.20044.15.4.2.213.1.4Columnpm1001imCntclientDwErrCntOverloadPortnread-onlycurrentClient counter overload :This OID when set indicates a FCS error counter overload on output Port
1.3.6.1.4.1.20044.15.4.2.214Tablepm1001imCntclientDwTimCntTablenot-accessiblecurrentList of pm1001imCntclientDwTimCnt Article
1.3.6.1.4.1.20044.15.4.2.214.1Rowpm1001imCntclientDwTimCntEntrynot-accessiblecurrentRow definition for the pm1001imCntclientDwTimCnt table
1.3.6.1.4.1.20044.15.4.2.214.1.1Columnpm1001imCntclientDwTimCntIndexread-onlycurrentIndex definition for the pm1001imCntclientDwTimCnt table
1.3.6.1.4.1.20044.15.4.2.214.1.2Columnpm1001imCntclientDwTimCntValuePortnread-onlycurrentClient downstream timer counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.15.4.2.214.1.3Columnpm1001imCntclientDwTimCntErrorPortnread-onlycurrentClient counter error :This OID when set indicates the downstream timer counter value is invalid on Port
1.3.6.1.4.1.20044.15.4.2.214.1.4Columnpm1001imCntclientDwTimCntOverloadPortnread-onlycurrentClient counter overload :This OID when set indicates a downstream timer counter overload on Port
1.3.6.1.4.1.20044.15.4.3Nodepm1001imCntLine
1.3.6.1.4.1.20044.15.4.3.152Tablepm1001imCntdfrmB1ErrCntTablenot-accessiblecurrentList of pm1001imCntdfrmB1ErrCnt Article
1.3.6.1.4.1.20044.15.4.3.152.1Rowpm1001imCntdfrmB1ErrCntEntrynot-accessiblecurrentRow definition for the pm1001imCntdfrmB1ErrCnt table
1.3.6.1.4.1.20044.15.4.3.152.1.1Columnpm1001imCntdfrmB1ErrCntIndexread-onlycurrentIndex definition for the pm1001imCntdfrmB1ErrCnt table
1.3.6.1.4.1.20044.15.4.3.152.1.2Columnpm1001imCntdfrmB1ErrCntValuePortnread-onlycurrentLine BIP8 error counter :This counter is incremented each time a BIP8 error is detected on the Deframer input stream. <Help> This counter gives the number of B…
1.3.6.1.4.1.20044.15.4.3.152.1.3Columnpm1001imCntdfrmB1ErrCntErrorPortnread-onlycurrentLine counter error :This OID when set indicates the B1 error counter value is invalid on Port
1.3.6.1.4.1.20044.15.4.3.152.1.4Columnpm1001imCntdfrmB1ErrCntOverloadPortnread-onlycurrentLine counter overload :This OID when set indicates a B1 error counter overload on Port
1.3.6.1.4.1.20044.15.4.3.153Tablepm1001imCntdfrmTimCntTablenot-accessiblecurrentList of pm1001imCntdfrmTimCnt Article
1.3.6.1.4.1.20044.15.4.3.153.1Rowpm1001imCntdfrmTimCntEntrynot-accessiblecurrentRow definition for the pm1001imCntdfrmTimCnt table
1.3.6.1.4.1.20044.15.4.3.153.1.1Columnpm1001imCntdfrmTimCntIndexread-onlycurrentIndex definition for the pm1001imCntdfrmTimCnt table
1.3.6.1.4.1.20044.15.4.3.153.1.2Columnpm1001imCntdfrmTimCntValuePortnread-onlycurrentLine timer counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.15.4.3.153.1.3Columnpm1001imCntdfrmTimCntErrorPortnread-onlycurrentLine counter error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.15.4.3.153.1.4Columnpm1001imCntdfrmTimCntOverloadPortnread-onlycurrentLine counter overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.15.4.259Scalarpm1001imCntCountersResetread-writecurrentCounters Reset:This OID resets and restarts all the counters
1.3.6.1.4.1.20044.15.4.260Scalarpm1001imCntCountersStopread-writecurrentCounters stop:This OID stops all the counters
1.3.6.1.4.1.20044.15.6Nodepm1001imcontrolsWrite
1.3.6.1.4.1.20044.15.6.1Nodepm1001imCtrlOther
1.3.6.1.4.1.20044.15.6.1.1Nodepm1001imCtrlconfMgnt1
1.3.6.1.4.1.20044.15.6.1.1.1Scalarpm1001imCtrlConf1Load1read-writecurrentLoad Configuration Tables set nb 1 :When set this OID enables loading from flash configuration1 into the PM.
1.3.6.1.4.1.20044.15.6.1.1.2Scalarpm1001imCtrlConf2Load1read-writecurrentLoad Configuration Tables set nb 2 :When set this OID enables loading from flash configuration2 into the PM.
1.3.6.1.4.1.20044.15.6.1.1.10Scalarpm1001imCtrlConf2Flash1read-writecurrentWrite Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura…
1.3.6.1.4.1.20044.15.6.1.1.14Scalarpm1001imCtrlConf2Clear1read-writecurrentClear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o…
1.3.6.1.4.1.20044.15.6.1.4Nodepm1001imCtrlsynth4
1.3.6.1.4.1.20044.15.6.1.4.1Scalarpm1001imCtrlCorrelatOnread-writecurrentEnable Alarm Correlation :This OID enables the alarm correlation in the PM.
1.3.6.1.4.1.20044.15.6.1.4.2Scalarpm1001imCtrlCorrelatOffread-writecurrentDisable Alarm Correlation :This OID disables the alarm correlation in the PM.
1.3.6.1.4.1.20044.15.6.1.5Nodepm1001imCtrlswMgnt
1.3.6.1.4.1.20044.15.6.1.5.2Scalarpm1001imCtrlColdResetread-writecurrentPM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> …
1.3.6.1.4.1.20044.15.6.1.5.3Scalarpm1001imCtrlWarmResetread-writecurrentPM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th…
1.3.6.1.4.1.20044.15.6.1.5.5Scalarpm1001imCtrlLoadSwBank1read-writecurrentSet Software nb 1 as active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW…
1.3.6.1.4.1.20044.15.6.1.5.6Scalarpm1001imCtrlLoadSwBank2read-writecurrentSet Software nb 2 as active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S…
1.3.6.1.4.1.20044.15.6.1.6Nodepm1001imCtrlgwMgnt
1.3.6.1.4.1.20044.15.6.1.6.1Scalarpm1001imCtrlCurrentGwResetread-writecurrentActive Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting.
1.3.6.1.4.1.20044.15.6.1.6.5Scalarpm1001imCtrlLoadGwBank1read-writecurrentSet Gateware nb 1 as active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.15.6.1.6.6Scalarpm1001imCtrlLoadGwBank2read-writecurrentSet Gateware nb 2 as active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.15.6.1.6.7Scalarpm1001imCtrlLoadGwBank3read-writecurrentSet Gateware nb 3 as active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.15.6.1.6.8Scalarpm1001imCtrlLoadGwBank4read-writecurrentSet Gateware nb 4 as active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.15.6.1.192Nodepm1001imCtrlledTest
1.3.6.1.4.1.20044.15.6.1.192.1Scalarpm1001imCtrlGreenLedread-writecurrentGreen Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green
1.3.6.1.4.1.20044.15.6.1.192.2Scalarpm1001imCtrlRedLedread-writecurrentRed Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red
1.3.6.1.4.1.20044.15.6.1.192.3Scalarpm1001imCtrlLedOffread-writecurrentLeds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF
1.3.6.1.4.1.20044.15.6.1.193Nodepm1001imCtrlmoduleOosMode
1.3.6.1.4.1.20044.15.6.1.193.1Scalarpm1001imCtrlModuleOosModeread-writecurrentPM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module
1.3.6.1.4.1.20044.15.6.1.197Nodepm1001imCtrlmaintenanceMode
1.3.6.1.4.1.20044.15.6.1.197.1Scalarpm1001imCtrlMaintenanceModeread-writecurrentEnable Maintenance :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM.
1.3.6.1.4.1.20044.15.6.1.198Nodepm1001imCtrldccEnable
1.3.6.1.4.1.20044.15.6.1.198.1Scalarpm1001imCtrlDccEnableread-writecurrentDCC Mode :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM
1.3.6.1.4.1.20044.15.6.2Nodepm1001imCtrlClient
1.3.6.1.4.1.20044.15.6.2.16Nodepm1001imCtrlaccessLoop
1.3.6.1.4.1.20044.15.6.2.16.1Scalarpm1001imCtrlaccessLoopClientread-writecurrentClient Access Loop Back :This OID operates an access loopback on the Client port.
1.3.6.1.4.1.20044.15.6.2.18Nodepm1001imCtrlportOosMode
1.3.6.1.4.1.20044.15.6.2.18.1Scalarpm1001imCtrlportOosModeClientread-writecurrentClient port Out of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port
1.3.6.1.4.1.20044.15.6.2.20Nodepm1001imCtrlclientXfpOff
1.3.6.1.4.1.20044.15.6.2.20.1Scalarpm1001imCtrlclientXfpOffClientread-writecurrentClient XFP Optical Laser OFF :This OID switches off the XFP. <Help> This control defines the laser state of the client transceiver
1.3.6.1.4.1.20044.15.6.2.21Nodepm1001imCtrlcsfUpIns
1.3.6.1.4.1.20044.15.6.2.21.1Scalarpm1001imCtrlcsfUpInsClientread-writecurrentClient Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo…
1.3.6.1.4.1.20044.15.6.2.22Nodepm1001imCtrlcaisDwIns
1.3.6.1.4.1.20044.15.6.2.22.1Scalarpm1001imCtrlcaisDwInsClientread-writecurrentClient AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port
1.3.6.1.4.1.20044.15.6.3Nodepm1001imCtrlLine
1.3.6.1.4.1.20044.15.6.3.66Nodepm1001imCtrllineLoop
1.3.6.1.4.1.20044.15.6.3.66.1Scalarpm1001imCtrlLineLoopread-writedeprecatedPM Line Loop mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups…
1.3.6.1.4.1.20044.15.6.3.67Nodepm1001imCtrllineMsAis
1.3.6.1.4.1.20044.15.6.3.67.1Scalarpm1001imCtrlMsAisread-writecurrentInsert MS-AIS/L-AIS on Line output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal.
1.3.6.1.4.1.20044.15.6.3.70Scalarpm1001imCtrllineUpS1read-writecurrentS1 value inserted on line output :The value to be written in the upstream S1 byte of the OC-192c/STM-64c signal is accessible through the present element.
1.3.6.1.4.1.20044.15.6.3.71Scalarpm1001imCtrllineUpK1read-writecurrentK1 value inserted on line output :The value to be written in the upstream K1 byte of the OC-192c/STM-64c signal is accessible through the present element.
1.3.6.1.4.1.20044.15.6.3.72Scalarpm1001imCtrllineUpK2read-writecurrentK2 value inserted on line output :The value to be written in the upstream K2 byte of the OC-192c/STM-64c signal is accessible through the present element.
1.3.6.1.4.1.20044.15.6.3.74Nodepm1001imCtrllineOosMode
1.3.6.1.4.1.20044.15.6.3.74.1Scalarpm1001imCtrllineOosModeAllLinesread-writecurrentLine port Out of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port
1.3.6.1.4.1.20044.15.6.3.100Scalarpm1001imCtrllineBandwidthread-writecurrentLine Bandwidth (nb of 2.5G) :This OID defines the line bandwidth in number of SFP interfaces used on the line (each SFP represents 2.5 Gb/s) <Help> This contro…
1.3.6.1.4.1.20044.15.6.3.208Nodepm1001imCtrllineOnoff
1.3.6.1.4.1.20044.15.6.3.208.1Scalarpm1001imCtrllineOnoffAllLinesread-writecurrentLine SFPs Optical Laser OFF :This OID switches off the SFPs <Help> This control defines the laser state of the line transceiver
1.3.6.1.4.1.20044.15.7Nodepm1001imri
1.3.6.1.4.1.20044.15.7.1Nodepm1001imriTable
1.3.6.1.4.1.20044.15.7.1.2Tablepm1001imRinvLineTablenot-accessiblecurrentList of the XFPs on the selected module
1.3.6.1.4.1.20044.15.7.1.2.1Rowpm1001imRinvLineEntrynot-accessiblecurrentRow definition for the XFP table
1.3.6.1.4.1.20044.15.7.1.2.1.1Columnpm1001imRinvLineIndexread-onlycurrentIndex for XFP table
1.3.6.1.4.1.20044.15.7.1.2.1.2Columnpm1001imRinvSfpLineread-onlycurrentInventory for the SFP: This OID contains the inventory for the SFP
1.3.6.1.4.1.20044.15.7.2Scalarpm1001imRinvReloadInventoryread-writecurrentReload the inventory: This OID triggers an inventory reload.
1.3.6.1.4.1.20044.15.7.3Scalarpm1001imRinvHwPlatformread-onlycurrentHW platform description: This OID contains the description of the Hardware platform.
1.3.6.1.4.1.20044.15.7.4Scalarpm1001imRinvModulePlatformread-onlycurrentModule platform description: This OID contains the description of the Module.
1.3.6.1.4.1.20044.15.7.5Scalarpm1001imRinvSwPlatformread-onlycurrentSW platform description: This OID contains the description of the Software platform.
1.3.6.1.4.1.20044.15.7.6Scalarpm1001imRinvGwPlatformread-onlycurrentGW platform desciption: This OID contains the description of the Gateware platform.
1.3.6.1.4.1.20044.15.7.7Scalarpm1001imRinvXfpClientread-onlycurrentInventory for the XFP: This OID contains the inventory for the XFP
1.3.6.1.4.1.20044.15.8Nodepm1001imdownload
1.3.6.1.4.1.20044.15.8.1Nodepm1001imDwlOther
1.3.6.1.4.1.20044.15.8.1.0Nodepm1001imDwlrestartProcess
1.3.6.1.4.1.20044.15.8.1.0.1Scalarpm1001imDwlWarmRestartProcessedread-onlycurrentWarm Restart :This OID indicates that the module last restart was a Warm RESTART
1.3.6.1.4.1.20044.15.8.1.0.2Scalarpm1001imDwlColdRestartProcessedread-onlycurrentCold Restart :This OID indicates that the module last restart was a Cold RESTART
1.3.6.1.4.1.20044.15.8.1.1Nodepm1001imDwlswBanksUsed
1.3.6.1.4.1.20044.15.8.1.1.1Scalarpm1001imDwlSwBank1Usedread-onlycurrentSW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby
1.3.6.1.4.1.20044.15.8.1.1.2Scalarpm1001imDwlSwBank2Usedread-onlycurrentSW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby
1.3.6.1.4.1.20044.15.8.1.1.5Scalarpm1001imDwlSwBank1Notemptyread-onlycurrentSW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package
1.3.6.1.4.1.20044.15.8.1.1.6Scalarpm1001imDwlSwBank2Notemptyread-onlycurrentSW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package
1.3.6.1.4.1.20044.15.8.1.2Nodepm1001imDwlgwBanksUsed
1.3.6.1.4.1.20044.15.8.1.2.1Scalarpm1001imDwlGwBank1Usedread-onlycurrentGW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby
1.3.6.1.4.1.20044.15.8.1.2.2Scalarpm1001imDwlGwBank2Usedread-onlycurrentGW bank 2 active :This OID indicates the module is working on GW bank 2
1.3.6.1.4.1.20044.15.8.1.2.3Scalarpm1001imDwlGwBank3Usedread-onlycurrentGW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby
1.3.6.1.4.1.20044.15.8.1.2.4Scalarpm1001imDwlGwBank4Usedread-onlycurrentGW bank 4 active :This OID indicates the module is working on GW bank 4
1.3.6.1.4.1.20044.15.8.1.2.5Scalarpm1001imDwlGwBank1Notemptyread-onlycurrentGW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package
1.3.6.1.4.1.20044.15.8.1.2.6Scalarpm1001imDwlGwBank2Notemptyread-onlycurrentGW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2
1.3.6.1.4.1.20044.15.8.1.2.7Scalarpm1001imDwlGwBank3Notemptyread-onlycurrentGW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package
1.3.6.1.4.1.20044.15.8.1.2.8Scalarpm1001imDwlGwBank4Notemptyread-onlycurrentGW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4
1.3.6.1.4.1.20044.15.8.2Nodepm1001imDwlClient
1.3.6.1.4.1.20044.15.8.3Nodepm1001imDwlLine
1.3.6.1.4.1.20044.15.9Nodepm1001imrmon
1.3.6.1.4.1.20044.15.9.1Nodepm1001imRmonOther
1.3.6.1.4.1.20044.15.9.1.359Scalarpm1001imMonCountersResetread-writecurrentRMON Counters Reset:This OID resets and restarts all the RMON counters
1.3.6.1.4.1.20044.15.9.1.360Scalarpm1001imMonCountersStopread-writecurrentRMON Counters stop:This OID stops all the RMON counters
1.3.6.1.4.1.20044.15.9.2Nodepm1001imRmonClient
1.3.6.1.4.1.20044.15.9.2.16Tablepm1001imMonupRmonByteCntTablenot-accessiblecurrentList of pm1001imMonupRmonByteCnt Article
1.3.6.1.4.1.20044.15.9.2.16.1Rowpm1001imMonupRmonByteCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonByteCnt table
1.3.6.1.4.1.20044.15.9.2.16.1.1Columnpm1001imMonupRmonByteCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonByteCnt table
1.3.6.1.4.1.20044.15.9.2.16.1.2Columnpm1001imMonupRmonByteCntValuePortnread-onlycurrentBytes counter on Client input :This counter is increased each time a data byte is received on the client port
1.3.6.1.4.1.20044.15.9.2.16.1.3Columnpm1001imMonupRmonByteCntErrorPortnread-onlycurrentInput Bytes counter error :This OID when set indicates the input Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.16.1.4Columnpm1001imMonupRmonByteCntOverloadPortnread-onlycurrentInput Bytes counter overload :This OID when set indicates an input Bytes counter overload on client port
1.3.6.1.4.1.20044.15.9.2.24Tablepm1001imMonupRmonCrcErrorCntTablenot-accessiblecurrentList of pm1001imMonupRmonCrcErrorCnt Article
1.3.6.1.4.1.20044.15.9.2.24.1Rowpm1001imMonupRmonCrcErrorCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonCrcErrorCnt table
1.3.6.1.4.1.20044.15.9.2.24.1.1Columnpm1001imMonupRmonCrcErrorCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonCrcErrorCnt table
1.3.6.1.4.1.20044.15.9.2.24.1.2Columnpm1001imMonupRmonCrcErrorCntValuePortnread-onlycurrentCRC Errors counter on Client input :This counter is increased each time a CRC error is detected on the input client port <Help> This counter gives the number o…
1.3.6.1.4.1.20044.15.9.2.24.1.3Columnpm1001imMonupRmonCrcErrorCntErrorPortnread-onlycurrentInput CRC Errors counter error :This OID when set indicates the input CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.24.1.4Columnpm1001imMonupRmonCrcErrorCntOverloadPortnread-onlycurrentInput CRC Errors counter overload :This OID when set indicates an input CRC Errors counter overload on client port
1.3.6.1.4.1.20044.15.9.2.32Tablepm1001imMonupRmonPacketsCntTablenot-accessiblecurrentList of pm1001imMonupRmonPacketsCnt Article
1.3.6.1.4.1.20044.15.9.2.32.1Rowpm1001imMonupRmonPacketsCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonPacketsCnt table
1.3.6.1.4.1.20044.15.9.2.32.1.1Columnpm1001imMonupRmonPacketsCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonPacketsCnt table
1.3.6.1.4.1.20044.15.9.2.32.1.2Columnpm1001imMonupRmonPacketsCntValuePortnread-onlycurrentPackets counter on Client input :This counter is increased each time a packet is received on the client port
1.3.6.1.4.1.20044.15.9.2.32.1.3Columnpm1001imMonupRmonPacketsCntErrorPortnread-onlycurrentInput Packets counter error :This OID when set indicates the input Packets counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.32.1.4Columnpm1001imMonupRmonPacketsCntOverloadPortnread-onlycurrentInput Packets counter overload :This OID when set indicates an input Packets counter overload on client port
1.3.6.1.4.1.20044.15.9.2.40Tablepm1001imMonupRmonBroadcastCntTablenot-accessiblecurrentList of pm1001imMonupRmonBroadcastCnt Article
1.3.6.1.4.1.20044.15.9.2.40.1Rowpm1001imMonupRmonBroadcastCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonBroadcastCnt table
1.3.6.1.4.1.20044.15.9.2.40.1.1Columnpm1001imMonupRmonBroadcastCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonBroadcastCnt table
1.3.6.1.4.1.20044.15.9.2.40.1.2Columnpm1001imMonupRmonBroadcastCntValuePortnread-onlycurrentBroadcast counter on Client input :This counter is increased each time a broadcast packet is received on the client port
1.3.6.1.4.1.20044.15.9.2.40.1.3Columnpm1001imMonupRmonBroadcastCntErrorPortnread-onlycurrentInput Broadcast counter error :This OID when set indicates the input Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.40.1.4Columnpm1001imMonupRmonBroadcastCntOverloadPortnread-onlycurrentInput Broadcast counter overload :This OID when set indicates an input Broadcast counter overload on client port
1.3.6.1.4.1.20044.15.9.2.48Tablepm1001imMonupRmonMulticastCntTablenot-accessiblecurrentList of pm1001imMonupRmonMulticastCnt Article
1.3.6.1.4.1.20044.15.9.2.48.1Rowpm1001imMonupRmonMulticastCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonMulticastCnt table
1.3.6.1.4.1.20044.15.9.2.48.1.1Columnpm1001imMonupRmonMulticastCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonMulticastCnt table
1.3.6.1.4.1.20044.15.9.2.48.1.2Columnpm1001imMonupRmonMulticastCntValuePortnread-onlycurrentMulticast counter on Client input :This counter is increased each time a Multicast packet is received on the client port
1.3.6.1.4.1.20044.15.9.2.48.1.3Columnpm1001imMonupRmonMulticastCntErrorPortnread-onlycurrentInput Multicast counter error :This OID when set indicates the input Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.48.1.4Columnpm1001imMonupRmonMulticastCntOverloadPortnread-onlycurrentInput Multicast counter overload :This OID when set indicates an input Multicast counter overload on client port
1.3.6.1.4.1.20044.15.9.2.56Tablepm1001imMonupRmonTimerCntTablenot-accessiblecurrentList of pm1001imMonupRmonTimerCnt Article
1.3.6.1.4.1.20044.15.9.2.56.1Rowpm1001imMonupRmonTimerCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonTimerCnt table
1.3.6.1.4.1.20044.15.9.2.56.1.1Columnpm1001imMonupRmonTimerCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonTimerCnt table
1.3.6.1.4.1.20044.15.9.2.56.1.2Columnpm1001imMonupRmonTimerCntValuePortnread-onlycurrentRMON Timer on client input :This is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.15.9.2.56.1.3Columnpm1001imMonupRmonTimerCntErrorPortnread-onlycurrentInput RMON Timer error :This OID when set indicates the input RMON timer is invalid on client port
1.3.6.1.4.1.20044.15.9.2.56.1.4Columnpm1001imMonupRmonTimerCntOverloadPortnread-onlycurrentInput RMON Timer overload :This OID when set indicates an input RMON timer overload on client port
1.3.6.1.4.1.20044.15.9.2.64Tablepm1001imMonupRmonPauseFrameCntTablenot-accessiblecurrentList of pm1001imMonupRmonPauseFrameCnt Article
1.3.6.1.4.1.20044.15.9.2.64.1Rowpm1001imMonupRmonPauseFrameCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonPauseFrameCnt table
1.3.6.1.4.1.20044.15.9.2.64.1.1Columnpm1001imMonupRmonPauseFrameCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonPauseFrameCnt table
1.3.6.1.4.1.20044.15.9.2.64.1.2Columnpm1001imMonupRmonPauseFrameCntValuePortnread-onlycurrentPause counter on Client input :This counter is increased each time a Pause frame is received on the client port
1.3.6.1.4.1.20044.15.9.2.64.1.3Columnpm1001imMonupRmonPauseFrameCntErrorPortnread-onlycurrentInput Pause counter error :This OID when set indicates the input Pause counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.64.1.4Columnpm1001imMonupRmonPauseFrameCntOverloadPortnread-onlycurrentInput Pause counter overload :This OID when set indicates an input Pause counter overload on client port
1.3.6.1.4.1.20044.15.9.2.72Tablepm1001imMonupRmonDropFrameCntTablenot-accessiblecurrentList of pm1001imMonupRmonDropFrameCnt Article
1.3.6.1.4.1.20044.15.9.2.72.1Rowpm1001imMonupRmonDropFrameCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonDropFrameCnt table
1.3.6.1.4.1.20044.15.9.2.72.1.1Columnpm1001imMonupRmonDropFrameCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonDropFrameCnt table
1.3.6.1.4.1.20044.15.9.2.72.1.2Columnpm1001imMonupRmonDropFrameCntValuePortnread-onlycurrentDrop counter on Client input :This counter is increased each time a Frame is dropped on the input client port
1.3.6.1.4.1.20044.15.9.2.72.1.3Columnpm1001imMonupRmonDropFrameCntErrorPortnread-onlycurrentInput Drop counter error :This OID when set indicates the input Drop counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.72.1.4Columnpm1001imMonupRmonDropFrameCntOverloadPortnread-onlycurrentInput Drop counter overload :This OID when set indicates an input Drop counter overload on client port
1.3.6.1.4.1.20044.15.9.2.80Tablepm1001imMonupRmonBitsCntTablenot-accessiblecurrentList of pm1001imMonupRmonBitsCnt Article
1.3.6.1.4.1.20044.15.9.2.80.1Rowpm1001imMonupRmonBitsCntEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonBitsCnt table
1.3.6.1.4.1.20044.15.9.2.80.1.1Columnpm1001imMonupRmonBitsCntIndexread-onlycurrentIndex definition for the pm1001imMonupRmonBitsCnt table
1.3.6.1.4.1.20044.15.9.2.80.1.2Columnpm1001imMonupRmonBitsCntValuePortnread-onlycurrentBits counter on Client Input :This counter is increased each time a bit is received on the input client port
1.3.6.1.4.1.20044.15.9.2.80.1.3Columnpm1001imMonupRmonBitsCntErrorPortnread-onlycurrentInput Bits counter error :This OID when set indicates the input Bits counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.80.1.4Columnpm1001imMonupRmonBitsCntOverloadPortnread-onlycurrentInput Bits counter overload :This OID when set indicates an input Bits counter overload on client port
1.3.6.1.4.1.20044.15.9.2.112Tablepm1001imMondwRmonByteCntTablenot-accessiblecurrentList of pm1001imMondwRmonByteCnt Article
1.3.6.1.4.1.20044.15.9.2.112.1Rowpm1001imMondwRmonByteCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonByteCnt table
1.3.6.1.4.1.20044.15.9.2.112.1.1Columnpm1001imMondwRmonByteCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonByteCnt table
1.3.6.1.4.1.20044.15.9.2.112.1.2Columnpm1001imMondwRmonByteCntValuePortnread-onlycurrentBytes counter on Client output :This counter is increased each time a data byte is transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.112.1.3Columnpm1001imMondwRmonByteCntErrorPortnread-onlycurrentOutput Bytes counter error :This OID when set indicates the output Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.112.1.4Columnpm1001imMondwRmonByteCntOverloadPortnread-onlycurrentOutput Bytes counter overload :This OID when set indicates an output Bytes counter overload on client port
1.3.6.1.4.1.20044.15.9.2.120Tablepm1001imMondwRmonCrcErrorCntTablenot-accessiblecurrentList of pm1001imMondwRmonCrcErrorCnt Article
1.3.6.1.4.1.20044.15.9.2.120.1Rowpm1001imMondwRmonCrcErrorCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonCrcErrorCnt table
1.3.6.1.4.1.20044.15.9.2.120.1.1Columnpm1001imMondwRmonCrcErrorCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonCrcErrorCnt table
1.3.6.1.4.1.20044.15.9.2.120.1.2Columnpm1001imMondwRmonCrcErrorCntValuePortnread-onlycurrentCRC Errors counter on Client output :This counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number…
1.3.6.1.4.1.20044.15.9.2.120.1.3Columnpm1001imMondwRmonCrcErrorCntErrorPortnread-onlycurrentOutput CRC Errors counter error :This OID when set indicates the output CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.120.1.4Columnpm1001imMondwRmonCrcErrorCntOverloadPortnread-onlycurrentOutput CRC Errors counter overload :This OID when set indicates an output CRC Errors counter overload on client port
1.3.6.1.4.1.20044.15.9.2.128Tablepm1001imMondwRmonPacketsCntTablenot-accessiblecurrentList of pm1001imMondwRmonPacketsCnt Article
1.3.6.1.4.1.20044.15.9.2.128.1Rowpm1001imMondwRmonPacketsCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonPacketsCnt table
1.3.6.1.4.1.20044.15.9.2.128.1.1Columnpm1001imMondwRmonPacketsCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonPacketsCnt table
1.3.6.1.4.1.20044.15.9.2.128.1.2Columnpm1001imMondwRmonPacketsCntValuePortnread-onlycurrentPackets counter on Client output :This counter is increased each time a packet is transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.128.1.3Columnpm1001imMondwRmonPacketsCntErrorPortnread-onlycurrentOutput Packets counter error :This OID when set indicates the output Packets counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.128.1.4Columnpm1001imMondwRmonPacketsCntOverloadPortnread-onlycurrentOutput Packets counter overload :This OID when set indicates an output Packets counter overload on client port
1.3.6.1.4.1.20044.15.9.2.136Tablepm1001imMondwRmonBroadcastCntTablenot-accessiblecurrentList of pm1001imMondwRmonBroadcastCnt Article
1.3.6.1.4.1.20044.15.9.2.136.1Rowpm1001imMondwRmonBroadcastCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonBroadcastCnt table
1.3.6.1.4.1.20044.15.9.2.136.1.1Columnpm1001imMondwRmonBroadcastCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonBroadcastCnt table
1.3.6.1.4.1.20044.15.9.2.136.1.2Columnpm1001imMondwRmonBroadcastCntValuePortnread-onlycurrentBroadcast counter on Client output :This counter is increased each time a broadcast packet is transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.136.1.3Columnpm1001imMondwRmonBroadcastCntErrorPortnread-onlycurrentOutput Broadcast counter error :This OID when set indicates the output Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.136.1.4Columnpm1001imMondwRmonBroadcastCntOverloadPortnread-onlycurrentOutput Broadcast counter overload :This OID when set indicates an output Broadcast counter overload on client port
1.3.6.1.4.1.20044.15.9.2.144Tablepm1001imMondwRmonMulticastCntTablenot-accessiblecurrentList of pm1001imMondwRmonMulticastCnt Article
1.3.6.1.4.1.20044.15.9.2.144.1Rowpm1001imMondwRmonMulticastCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonMulticastCnt table
1.3.6.1.4.1.20044.15.9.2.144.1.1Columnpm1001imMondwRmonMulticastCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonMulticastCnt table
1.3.6.1.4.1.20044.15.9.2.144.1.2Columnpm1001imMondwRmonMulticastCntValuePortnread-onlycurrentMulticast counter on Client output :This counter is increased each time a Multicast packet is transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.144.1.3Columnpm1001imMondwRmonMulticastCntErrorPortnread-onlycurrentOutput Multicast counter error :This OID when set indicates the output Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.144.1.4Columnpm1001imMondwRmonMulticastCntOverloadPortnread-onlycurrentOutput Multicast counter overload :This OID when set indicates an output Multicast counter overload on client port
1.3.6.1.4.1.20044.15.9.2.152Tablepm1001imMondwRmonPauseFrameCntTablenot-accessiblecurrentList of pm1001imMondwRmonPauseFrameCnt Article
1.3.6.1.4.1.20044.15.9.2.152.1Rowpm1001imMondwRmonPauseFrameCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonPauseFrameCnt table
1.3.6.1.4.1.20044.15.9.2.152.1.1Columnpm1001imMondwRmonPauseFrameCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonPauseFrameCnt table
1.3.6.1.4.1.20044.15.9.2.152.1.2Columnpm1001imMondwRmonPauseFrameCntValuePortnread-onlycurrentPause counter on Client output :This counter is increased each time a Pause frame is generated by the PM on the client port
1.3.6.1.4.1.20044.15.9.2.152.1.3Columnpm1001imMondwRmonPauseFrameCntErrorPortnread-onlycurrentOutput Pause counter error :This OID when set indicates the output Pause counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.152.1.4Columnpm1001imMondwRmonPauseFrameCntOverloadPortnread-onlycurrentOutput Pause counter overload :This OID when set indicates an output Pause counter overload on client port
1.3.6.1.4.1.20044.15.9.2.160Tablepm1001imMondwRmonTimerCntTablenot-accessiblecurrentList of pm1001imMondwRmonTimerCnt Article
1.3.6.1.4.1.20044.15.9.2.160.1Rowpm1001imMondwRmonTimerCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonTimerCnt table
1.3.6.1.4.1.20044.15.9.2.160.1.1Columnpm1001imMondwRmonTimerCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonTimerCnt table
1.3.6.1.4.1.20044.15.9.2.160.1.2Columnpm1001imMondwRmonTimerCntValuePortnread-onlycurrentRMON Timer on client output :This is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.15.9.2.160.1.3Columnpm1001imMondwRmonTimerCntErrorPortnread-onlycurrentOutput RMON Timer error :This OID when set indicates the output RMON timer is invalid on client port
1.3.6.1.4.1.20044.15.9.2.160.1.4Columnpm1001imMondwRmonTimerCntOverloadPortnread-onlycurrentOutput RMON Timer overload :This OID when set indicates an output RMON timer overload on client port
1.3.6.1.4.1.20044.15.9.2.168Tablepm1001imMondwRmonBitsCntTablenot-accessiblecurrentList of pm1001imMondwRmonBitsCnt Article
1.3.6.1.4.1.20044.15.9.2.168.1Rowpm1001imMondwRmonBitsCntEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonBitsCnt table
1.3.6.1.4.1.20044.15.9.2.168.1.1Columnpm1001imMondwRmonBitsCntIndexread-onlycurrentIndex definition for the pm1001imMondwRmonBitsCnt table
1.3.6.1.4.1.20044.15.9.2.168.1.2Columnpm1001imMondwRmonBitsCntValuePortnread-onlycurrentBits counter on Client Output :This counter is increased each time a bit is received on the Output client port
1.3.6.1.4.1.20044.15.9.2.168.1.3Columnpm1001imMondwRmonBitsCntErrorPortnread-onlycurrentOutput Bits counter error :This OID when set indicates the output Bits counter value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.168.1.4Columnpm1001imMondwRmonBitsCntOverloadPortnread-onlycurrentOutput Bits counter overload :This OID when set indicates an output Bits counter overload on client port
1.3.6.1.4.1.20044.15.9.2.1024Tablepm1001imMonupRmonByteCntSTablenot-accessiblecurrentList of pm1001imMonupRmonByteCntS Article
1.3.6.1.4.1.20044.15.9.2.1024.1Rowpm1001imMonupRmonByteCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonByteCntS table
1.3.6.1.4.1.20044.15.9.2.1024.1.1Columnpm1001imMonupRmonByteCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonByteCntS table
1.3.6.1.4.1.20044.15.9.2.1024.1.2Columnpm1001imMonupRmonByteCntSValuePortnread-onlycurrentBytes rate on Client input :This rate indicates the number of bytes per second that are received on the client port
1.3.6.1.4.1.20044.15.9.2.1024.1.3Columnpm1001imMonupRmonByteCntSErrorPortnread-onlycurrentInput Bytes rate error :This OID when set indicates the input Bytes rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1024.1.4Columnpm1001imMonupRmonByteCntSOverloadPortnread-onlycurrentInput Bytes rate overload :This OID when set indicates an input Bytes rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1032Tablepm1001imMonupRmonCrcErrorCntSTablenot-accessiblecurrentList of pm1001imMonupRmonCrcErrorCntS Article
1.3.6.1.4.1.20044.15.9.2.1032.1Rowpm1001imMonupRmonCrcErrorCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonCrcErrorCntS table
1.3.6.1.4.1.20044.15.9.2.1032.1.1Columnpm1001imMonupRmonCrcErrorCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonCrcErrorCntS table
1.3.6.1.4.1.20044.15.9.2.1032.1.2Columnpm1001imMonupRmonCrcErrorCntSValuePortnread-onlycurrentCRC Errors rate on Client input :This rate indicates the number of CRC errors per second that are detected on the input client port
1.3.6.1.4.1.20044.15.9.2.1032.1.3Columnpm1001imMonupRmonCrcErrorCntSErrorPortnread-onlycurrentInput CRC Errors rate error :This OID when set indicates the input CRC Errors rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1032.1.4Columnpm1001imMonupRmonCrcErrorCntSOverloadPortnread-onlycurrentInput CRC Errors rate overload :This OID when set indicates an input CRC Errors rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1040Tablepm1001imMonupRmonPacketsCntSTablenot-accessiblecurrentList of pm1001imMonupRmonPacketsCntS Article
1.3.6.1.4.1.20044.15.9.2.1040.1Rowpm1001imMonupRmonPacketsCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonPacketsCntS table
1.3.6.1.4.1.20044.15.9.2.1040.1.1Columnpm1001imMonupRmonPacketsCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonPacketsCntS table
1.3.6.1.4.1.20044.15.9.2.1040.1.2Columnpm1001imMonupRmonPacketsCntSValuePortnread-onlycurrentPackets rate on Client input :This rate indicates the number of packets per second that are received on the client port
1.3.6.1.4.1.20044.15.9.2.1040.1.3Columnpm1001imMonupRmonPacketsCntSErrorPortnread-onlycurrentInput Packets rate error :This OID when set indicates the input Packets rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1040.1.4Columnpm1001imMonupRmonPacketsCntSOverloadPortnread-onlycurrentInput Packets rate overload :This OID when set indicates an input Packets rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1048Tablepm1001imMonupRmonBroadcastCntSTablenot-accessiblecurrentList of pm1001imMonupRmonBroadcastCntS Article
1.3.6.1.4.1.20044.15.9.2.1048.1Rowpm1001imMonupRmonBroadcastCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonBroadcastCntS table
1.3.6.1.4.1.20044.15.9.2.1048.1.1Columnpm1001imMonupRmonBroadcastCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonBroadcastCntS table
1.3.6.1.4.1.20044.15.9.2.1048.1.2Columnpm1001imMonupRmonBroadcastCntSValuePortnread-onlycurrentBroadcast rate on Client input :This rate indicates the number of broadcast packets per second that are received on the client port
1.3.6.1.4.1.20044.15.9.2.1048.1.3Columnpm1001imMonupRmonBroadcastCntSErrorPortnread-onlycurrentInput Broadcast rate error :This OID when set indicates the input Broadcast rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1048.1.4Columnpm1001imMonupRmonBroadcastCntSOverloadPortnread-onlycurrentInput Broadcast rate overload :This OID when set indicates an input Broadcast rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1056Tablepm1001imMonupRmonMulticastCntSTablenot-accessiblecurrentList of pm1001imMonupRmonMulticastCntS Article
1.3.6.1.4.1.20044.15.9.2.1056.1Rowpm1001imMonupRmonMulticastCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonMulticastCntS table
1.3.6.1.4.1.20044.15.9.2.1056.1.1Columnpm1001imMonupRmonMulticastCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonMulticastCntS table
1.3.6.1.4.1.20044.15.9.2.1056.1.2Columnpm1001imMonupRmonMulticastCntSValuePortnread-onlycurrentMulticast rate on Client input :This rate indicates the number of multicast packets per second that are received on the client port
1.3.6.1.4.1.20044.15.9.2.1056.1.3Columnpm1001imMonupRmonMulticastCntSErrorPortnread-onlycurrentInput Multicast rate error :This OID when set indicates the input Multicast rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1056.1.4Columnpm1001imMonupRmonMulticastCntSOverloadPortnread-onlycurrentInput Multicast rate overload :This OID when set indicates an input Multicast rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1072Tablepm1001imMonupRmonPauseFrameCntSTablenot-accessiblecurrentList of pm1001imMonupRmonPauseFrameCntS Article
1.3.6.1.4.1.20044.15.9.2.1072.1Rowpm1001imMonupRmonPauseFrameCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonPauseFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1072.1.1Columnpm1001imMonupRmonPauseFrameCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonPauseFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1072.1.2Columnpm1001imMonupRmonPauseFrameCntSValuePortnread-onlycurrentPause rate on Client input :This rate indicates the number of Pause frames per second that are received on the client port
1.3.6.1.4.1.20044.15.9.2.1072.1.3Columnpm1001imMonupRmonPauseFrameCntSErrorPortnread-onlycurrentInput Pause rate error :This OID when set indicates the input Pause rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1072.1.4Columnpm1001imMonupRmonPauseFrameCntSOverloadPortnread-onlycurrentInput Pause rate overload :This OID when set indicates an input Pause rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1080Tablepm1001imMonupRmonDropFrameCntSTablenot-accessiblecurrentList of pm1001imMonupRmonDropFrameCntS Article
1.3.6.1.4.1.20044.15.9.2.1080.1Rowpm1001imMonupRmonDropFrameCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonDropFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1080.1.1Columnpm1001imMonupRmonDropFrameCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonDropFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1080.1.2Columnpm1001imMonupRmonDropFrameCntSValuePortnread-onlycurrentDrop rate on Client input :This rate indicates the number packets per second that are received on the input client port
1.3.6.1.4.1.20044.15.9.2.1080.1.3Columnpm1001imMonupRmonDropFrameCntSErrorPortnread-onlycurrentInput Drop rate error :This OID when set indicates the input Drop rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1080.1.4Columnpm1001imMonupRmonDropFrameCntSOverloadPortnread-onlycurrentInput Drop rate overload :This OID when set indicates an input Drop rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1088Tablepm1001imMonupRmonBitsCntSTablenot-accessiblecurrentList of pm1001imMonupRmonBitsCntS Article
1.3.6.1.4.1.20044.15.9.2.1088.1Rowpm1001imMonupRmonBitsCntSEntrynot-accessiblecurrentRow definition for the pm1001imMonupRmonBitsCntS table
1.3.6.1.4.1.20044.15.9.2.1088.1.1Columnpm1001imMonupRmonBitsCntSIndexread-onlycurrentIndex definition for the pm1001imMonupRmonBitsCntS table
1.3.6.1.4.1.20044.15.9.2.1088.1.2Columnpm1001imMonupRmonBitsCntSValuePortnread-onlycurrentBits rate on Client input :This rate indicates the number of bits per second that are received on the input client port
1.3.6.1.4.1.20044.15.9.2.1088.1.3Columnpm1001imMonupRmonBitsCntSErrorPortnread-onlycurrentInput Bits rate error :This OID when set indicates the input Bits rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1088.1.4Columnpm1001imMonupRmonBitsCntSOverloadPortnread-onlycurrentInput Bits rate overload :This OID when set indicates an input Bits rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1120Tablepm1001imMondwRmonByteCntSTablenot-accessiblecurrentList of pm1001imMondwRmonByteCntS Article
1.3.6.1.4.1.20044.15.9.2.1120.1Rowpm1001imMondwRmonByteCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonByteCntS table
1.3.6.1.4.1.20044.15.9.2.1120.1.1Columnpm1001imMondwRmonByteCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonByteCntS table
1.3.6.1.4.1.20044.15.9.2.1120.1.2Columnpm1001imMondwRmonByteCntSValuePortnread-onlycurrentBytes rate on Client output :This rate indicates the number of bytes per second that are transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.1120.1.3Columnpm1001imMondwRmonByteCntSErrorPortnread-onlycurrentOutput Bytes rate error :This OID when set indicates the output Bytes rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1120.1.4Columnpm1001imMondwRmonByteCntSOverloadPortnread-onlycurrentOutput Bytes rate overload :This OID when set indicates an output Bytes rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1128Tablepm1001imMondwRmonCrcErrorCntSTablenot-accessiblecurrentList of pm1001imMondwRmonCrcErrorCntS Article
1.3.6.1.4.1.20044.15.9.2.1128.1Rowpm1001imMondwRmonCrcErrorCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonCrcErrorCntS table
1.3.6.1.4.1.20044.15.9.2.1128.1.1Columnpm1001imMondwRmonCrcErrorCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonCrcErrorCntS table
1.3.6.1.4.1.20044.15.9.2.1128.1.2Columnpm1001imMondwRmonCrcErrorCntSValuePortnread-onlycurrentCRC Errors rate on Client output :This rate indicates the number of CRC errors per second that are detected on the output client port
1.3.6.1.4.1.20044.15.9.2.1128.1.3Columnpm1001imMondwRmonCrcErrorCntSErrorPortnread-onlycurrentOutput CRC Errors rate error :This OID when set indicates the output CRC Errors rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1128.1.4Columnpm1001imMondwRmonCrcErrorCntSOverloadPortnread-onlycurrentOutput CRC Errors rate overload :This OID when set indicates an output CRC Errors rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1136Tablepm1001imMondwRmonPacketsCntSTablenot-accessiblecurrentList of pm1001imMondwRmonPacketsCntS Article
1.3.6.1.4.1.20044.15.9.2.1136.1Rowpm1001imMondwRmonPacketsCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonPacketsCntS table
1.3.6.1.4.1.20044.15.9.2.1136.1.1Columnpm1001imMondwRmonPacketsCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonPacketsCntS table
1.3.6.1.4.1.20044.15.9.2.1136.1.2Columnpm1001imMondwRmonPacketsCntSValuePortnread-onlycurrentPackets rate on Client output :This rate indicates the number of packets per second that are transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.1136.1.3Columnpm1001imMondwRmonPacketsCntSErrorPortnread-onlycurrentOutput Packets rate error :This OID when set indicates the output Packets rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1136.1.4Columnpm1001imMondwRmonPacketsCntSOverloadPortnread-onlycurrentOutput Packets rate overload :This OID when set indicates an output Packets rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1144Tablepm1001imMondwRmonBroadcastCntSTablenot-accessiblecurrentList of pm1001imMondwRmonBroadcastCntS Article
1.3.6.1.4.1.20044.15.9.2.1144.1Rowpm1001imMondwRmonBroadcastCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonBroadcastCntS table
1.3.6.1.4.1.20044.15.9.2.1144.1.1Columnpm1001imMondwRmonBroadcastCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonBroadcastCntS table
1.3.6.1.4.1.20044.15.9.2.1144.1.2Columnpm1001imMondwRmonBroadcastCntSValuePortnread-onlycurrentBroadcast rate on Client output :This rate indicates the number of broadcast packets per second that are transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.1144.1.3Columnpm1001imMondwRmonBroadcastCntSErrorPortnread-onlycurrentOutput Broadcast rate error :This OID when set indicates the output Broadcast rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1144.1.4Columnpm1001imMondwRmonBroadcastCntSOverloadPortnread-onlycurrentOutput Broadcast rate overload :This OID when set indicates an output Broadcast rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1152Tablepm1001imMondwRmonMulticastCntSTablenot-accessiblecurrentList of pm1001imMondwRmonMulticastCntS Article
1.3.6.1.4.1.20044.15.9.2.1152.1Rowpm1001imMondwRmonMulticastCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonMulticastCntS table
1.3.6.1.4.1.20044.15.9.2.1152.1.1Columnpm1001imMondwRmonMulticastCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonMulticastCntS table
1.3.6.1.4.1.20044.15.9.2.1152.1.2Columnpm1001imMondwRmonMulticastCntSValuePortnread-onlycurrentMulticast rate on Client output :This rate indicates the number of multicast packets per second that are transmitted on the client port
1.3.6.1.4.1.20044.15.9.2.1152.1.3Columnpm1001imMondwRmonMulticastCntSErrorPortnread-onlycurrentOutput Multicast rate error :This OID when set indicates the output Multicast rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1152.1.4Columnpm1001imMondwRmonMulticastCntSOverloadPortnread-onlycurrentOutput Multicast rate overload :This OID when set indicates an output Multicast rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1160Tablepm1001imMondwRmonPauseFrameCntSTablenot-accessiblecurrentList of pm1001imMondwRmonPauseFrameCntS Article
1.3.6.1.4.1.20044.15.9.2.1160.1Rowpm1001imMondwRmonPauseFrameCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonPauseFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1160.1.1Columnpm1001imMondwRmonPauseFrameCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonPauseFrameCntS table
1.3.6.1.4.1.20044.15.9.2.1160.1.2Columnpm1001imMondwRmonPauseFrameCntSValuePortnread-onlycurrentPause rate on Client Output :This rate indicates the number of Pause frames per second that are generated by the PM on the client port
1.3.6.1.4.1.20044.15.9.2.1160.1.3Columnpm1001imMondwRmonPauseFrameCntSErrorPortnread-onlycurrentOutput Pause rate error :This OID when set indicates the output Pause rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1160.1.4Columnpm1001imMondwRmonPauseFrameCntSOverloadPortnread-onlycurrentOutput Pause rate overload :This OID when set indicates an output Pause rate overload on client port
1.3.6.1.4.1.20044.15.9.2.1176Tablepm1001imMondwRmonBitsCntSTablenot-accessiblecurrentList of pm1001imMondwRmonBitsCntS Article
1.3.6.1.4.1.20044.15.9.2.1176.1Rowpm1001imMondwRmonBitsCntSEntrynot-accessiblecurrentRow definition for the pm1001imMondwRmonBitsCntS table
1.3.6.1.4.1.20044.15.9.2.1176.1.1Columnpm1001imMondwRmonBitsCntSIndexread-onlycurrentIndex definition for the pm1001imMondwRmonBitsCntS table
1.3.6.1.4.1.20044.15.9.2.1176.1.2Columnpm1001imMondwRmonBitsCntSValuePortnread-onlycurrentBit rate on Client output :This rate indicates the number of bits per second that are transmitted by the PM on the client port
1.3.6.1.4.1.20044.15.9.2.1176.1.3Columnpm1001imMondwRmonBitsCntSErrorPortnread-onlycurrentOutput Bits rate error :This OID when set indicates the output Bits rate value is invalid on client port
1.3.6.1.4.1.20044.15.9.2.1176.1.4Columnpm1001imMondwRmonBitsCntSOverloadPortnread-onlycurrentOutput Bits rate overload :This OID when set indicates an output Bits rate overload on client port
1.3.6.1.4.1.20044.15.9.3Nodepm1001imRmonLine
1.3.6.1.4.1.20044.15.10Nodepm1001imConfig
1.3.6.1.4.1.20044.15.10.1Nodepm1001imCfgAccessCAisCsf
1.3.6.1.4.1.20044.15.10.1.1Tablepm1001imCfgClientcaiscsfTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.15.10.1.1.1Rowpm1001imCfgClientcaiscsfEntrynot-accessiblecurrentRow definition for the accessCAisCsf table
1.3.6.1.4.1.20044.15.10.1.1.1.1Columnpm1001imCfgClientcaiscsfIndexread-onlycurrentIndex definition for the clientcaiscsf table
1.3.6.1.4.1.20044.15.10.1.1.1.3Columnpm1001imCfgCAisModePortnread-writecurrentCAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition
1.3.6.1.4.1.20044.15.10.1.1.1.9Columnpm1001imCfgUpAccessioAlmPortnread-writecurrentCSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port.
1.3.6.1.4.1.20044.15.10.1.1.1.10Columnpm1001imCfgUpMapperDeAlmPortnread-writecurrentCSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port.
1.3.6.1.4.1.20044.15.10.1.1.1.17Columnpm1001imCfgDownAccessioAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.15.10.1.1.1.18Columnpm1001imCfgDownMapperDeAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.15.10.1.1.1.19Columnpm1001imCfgDownDfrmAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.15.10.1.1.1.20Columnpm1001imCfgDownLineSyncAlarmsPortnread-writedeprecatedCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.15.10.2Nodepm1001imCfgStartup
1.3.6.1.4.1.20044.15.10.2.1Tablepm1001imCfgClientStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.15.10.2.1.1Rowpm1001imCfgClientStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.15.10.2.1.1.1Columnpm1001imCfgClientStartupIndexread-onlycurrentIndex definition for the clientStartup table
1.3.6.1.4.1.20044.15.10.2.1.1.3Columnpm1001imCfgSystConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.15.10.2.1.1.4Columnpm1001imCfgNetConfPortPortnread-writecurrentDefault Protocol on Client Port :This register configures the default initialisation protocol on the port.
1.3.6.1.4.1.20044.15.10.2.2Nodepm1001imtablelineStartup
1.3.6.1.4.1.20044.15.10.2.2.2Scalarpm1001imCfgsystConfLine1read-writecurrentDefault Settings on Line 1 :This register configures the default initialisation settings on Line port 1.
1.3.6.1.4.1.20044.15.10.2.2.4Scalarpm1001imCfglineBandwidth1read-writecurrentDefault Bandwidth (number of 2.5G) :This register configures the default line bandwith on the active line port
1.3.6.1.4.1.20044.15.10.2.2.5Scalarpm1001imCfglineOptions1read-writecurrentDefault Options on Active Line Port :This register configures the default options on the active line port
1.3.6.1.4.1.20044.15.10.2.3Tablepm1001imCfgXfpTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.15.10.2.3.1Rowpm1001imCfgXfpEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.15.10.2.3.1.1Columnpm1001imCfgXfpIndexread-onlycurrentIndex definition for the xfp table
1.3.6.1.4.1.20044.15.10.2.3.1.3Columnpm1001imCfgSystConfXfpPortnread-writecurrentDefault settings on XFP Port :This register configures the default initialisation settings on XFP port.
1.3.6.1.4.1.20044.15.10.2.3.1.4Columnpm1001imCfgDataRateConfXfpPortnread-writedeprecated:Reserved
1.3.6.1.4.1.20044.15.10.3Nodepm1001imCfgLabels
1.3.6.1.4.1.20044.15.10.3.1Tablepm1001imCfgLabelclientTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.15.10.3.1.1Rowpm1001imCfgLabelclientEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.15.10.3.1.1.1Columnpm1001imCfgLabelclientIndexread-onlycurrentIndex definition for the labelclient table
1.3.6.1.4.1.20044.15.10.3.1.1.3Columnpm1001imCfgLabelclientPortnread-writecurrentDefault settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports.
1.3.6.1.4.1.20044.15.10.3.2Tablepm1001imCfgLabellineTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.15.10.3.2.1Rowpm1001imCfgLabellineEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.15.10.3.2.1.1Columnpm1001imCfgLabellineIndexread-onlycurrentIndex definition for the labelline table
1.3.6.1.4.1.20044.15.10.3.2.1.3Columnpm1001imCfgLabellinePortnread-writecurrentDefault settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines.
1.3.6.1.4.1.20044.15.10.257Scalarpm1001imCfgWriteConfigurationread-writecurrentWrite configuration to module:This OID writes the complete configuration to the module
1.3.6.1.4.1.20044.15.11Nodepm1001imtraps
1.3.6.1.4.1.20044.15.11.3Scalarpm1001imtrapLineNumberread-onlycurrentLast Line which generates a trap
1.3.6.1.4.1.20044.15.11.4Scalarpm1001imtrapBoardNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.15.11.30Notificationpm1001imLineTrapNotUrgentGoesOncurrentNot urgent Line default is activated
1.3.6.1.4.1.20044.15.11.31Notificationpm1001imLineTrapNotUrgentGoesOffcurrentNot urgent Line default disappeared
1.3.6.1.4.1.20044.15.11.32Notificationpm1001imLineTrapUrgentGoesOncurrentUrgent Line default is activated
1.3.6.1.4.1.20044.15.11.33Notificationpm1001imLineTrapUrgentGoesOffcurrentUrgent Line default disappeared
1.3.6.1.4.1.20044.15.11.34Notificationpm1001imLineTrapCritGoesOncurrentCritical Line default is activated
1.3.6.1.4.1.20044.15.11.35Notificationpm1001imLineTrapCritGoesOffcurrentCritical Line default disappeared
1.3.6.1.4.1.20044.15.11.40Notificationpm1001imClientTrapNotUrgentGoesOncurrentNot urgent client default is activated
1.3.6.1.4.1.20044.15.11.41Notificationpm1001imClientTrapNotUrgentGoesOffcurrentNot urgent client default disappeared
1.3.6.1.4.1.20044.15.11.42Notificationpm1001imClientTrapUrgentGoesOncurrentUrgent client default is activated
1.3.6.1.4.1.20044.15.11.43Notificationpm1001imClientTrapUrgentGoesOffcurrentUrgent client default disappeared
1.3.6.1.4.1.20044.15.11.44Notificationpm1001imClientTrapCritGoesOncurrentCritical client default is activated
1.3.6.1.4.1.20044.15.11.45Notificationpm1001imClientTrapCritGoesOffcurrentCritical client default disappeared
1.3.6.1.4.1.20044.15.11.50Notificationpm1001imPowerTrapUrgentGoesOncurrentUrgent power supply default is activated
1.3.6.1.4.1.20044.15.11.51Notificationpm1001imPowerTrapUrgentGoesOffcurrentUrgent power supply default disappeared
Type Definitions
NameSyntaxStatusDescription
Pm1001imBandwidthModeINTEGER { oneline(0), twolines(1), threelines(2), fourlines(3) }currentDifferent bandwidth for line ports
MIB Viewer