MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

ELTEX-BRIDGE-ERPS-MIB

51 objects

The MIB module for managing Ethernet Ring Protection Switching.

Imported Objects

ELTEX-BRIDGE-EXT-MIB	eltexBridgeExtMIBObjects
Q-BRIDGE-MIB	VlanIdOrNone
SNMPv2-SMI	MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC	MacAddress RowStatus TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.35265.35.1.1	IdentityeltexErpsMIB			The MIB module for managing Ethernet Ring Protection Switching.
1.3.6.1.4.1.35265.35.1.1.1	NodeeltexErpsCtrl
1.3.6.1.4.1.35265.35.1.1.1.1	ScalareltexErpsAdminState	read-write	current	This object indicates the ERPS state of the bridge.
1.3.6.1.4.1.35265.35.1.1.1.2	ScalareltexErpsLogState	read-write	current	This object indicates the ERPS log state of the bridge.
1.3.6.1.4.1.35265.35.1.1.1.3	ScalareltexErpsTrapState	read-write	current	This object indicates the ERPS trap state of the bridge.
1.3.6.1.4.1.35265.35.1.1.1.5	ScalareltexErpsPendingAction	read-write	current	The action to be done with the pending configuration. copyPendingActive - to copy the pending erps configuration to the active one. copyActivePending - to copy…
1.3.6.1.4.1.35265.35.1.1.1.6	ScalareltexErpsPendingActionVlan	read-write	current	Variable is associated with eltexErpsPendingAction and determines vlan_tag number in config for action copying/revert on pending config
1.3.6.1.4.1.35265.35.1.1.1.7	ScalareltexErpsGetConfigId	read-write	current	Set config id fot snmp get.
1.3.6.1.4.1.35265.35.1.1.2	NodeeltexErpsInfo
1.3.6.1.4.1.35265.35.1.1.3	NodeeltexErpsMgmt
1.3.6.1.4.1.35265.35.1.1.3.1	TableeltexErpsMgmtRAPSVlanTable	not-accessible	current	This table contains ERPS ring configuration information.
1.3.6.1.4.1.35265.35.1.1.3.1.1	RoweltexErpsMgmtRAPSVlanEntry	not-accessible	current	A list of ERPS ring configuration information.
1.3.6.1.4.1.35265.35.1.1.3.1.1.1	ColumneltexErpsMgmtRAPSVlanId	read-only	current	The RAPS VLAN is an index of configuration.
1.3.6.1.4.1.35265.35.1.1.3.1.1.2	ColumneltexErpsMgmtRAPSWestPort	read-write	current	This is one of the Ethernet ring ports. The value 0 indicates the west port is a virtual channel.
1.3.6.1.4.1.35265.35.1.1.3.1.1.3	ColumneltexErpsMgmtRAPSWestPortState	read-only	current	This is the west port state. It may change sometimes. When the west port is configured on a virtual channel, the west port state is always fowarding.
1.3.6.1.4.1.35265.35.1.1.3.1.1.4	ColumneltexErpsMgmtRAPSEastPort	read-write	current	This is the other Ethernet ring port. The value 0 indicates the west port is a virtual channel.
1.3.6.1.4.1.35265.35.1.1.3.1.1.5	ColumneltexErpsMgmtRAPSEastPortState	read-only	current	This is the east port state. It may change sometimes. When the east port is configured on a virtual channel, the east port state is always fowarding.
1.3.6.1.4.1.35265.35.1.1.3.1.1.6	ColumneltexErpsMgmtRAPSRPLPort	read-write	current	When the port Enable state is enabled, the RPL port's current port role is defined by the application of the ERPS.
1.3.6.1.4.1.35265.35.1.1.3.1.1.7	ColumneltexErpsMgmtRAPSRPLOwnerAdminState	read-write	current	The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL…
1.3.6.1.4.1.35265.35.1.1.3.1.1.8	ColumneltexErpsMgmtRAPSRingMEL	read-write	current	The ring MEL is the maintenance entity group (MEG) level providing a communication channel for ring automatic protection switching (RAPS) information.
1.3.6.1.4.1.35265.35.1.1.3.1.1.9	ColumneltexErpsMgmtRAPSHoldOffTime	read-write	current	In order to coordinate timing of protection switches at multiple layers.
1.3.6.1.4.1.35265.35.1.1.3.1.1.10	ColumneltexErpsMgmtRAPSGuardTime	read-write	current	This is used to prevent ring nodes from receiving outdated RAPS messages.
1.3.6.1.4.1.35265.35.1.1.3.1.1.11	ColumneltexErpsMgmtRAPSWTRTime	read-write	current	In the revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity mus…
1.3.6.1.4.1.35265.35.1.1.3.1.1.12	ColumneltexErpsMgmtRAPSRingState	read-only	current	This indicates the state of the ring: begin, init, idle, or protection.
1.3.6.1.4.1.35265.35.1.1.3.1.1.13	ColumneltexErpsMgmtRAPSRingAdminState	read-write	current	This indicates the administrative state of the ring.
1.3.6.1.4.1.35265.35.1.1.3.1.1.14	ColumneltexErpsMgmtRAPSRPLOwnerOperStatus	read-only	current	The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device …
1.3.6.1.4.1.35265.35.1.1.3.1.1.15	ColumneltexErpsMgmtRAPSProtectionVlanRangeList1to1024	read-write	current	This object indicates the VLAN range (1-1024) that belongs to the protection VLANs.
1.3.6.1.4.1.35265.35.1.1.3.1.1.16	ColumneltexErpsMgmtRAPSProtectionVlanRangeList1025to2048	read-write	current	This object indicates the VLAN range (1025-2048) that belongs to the protection VLANs.
1.3.6.1.4.1.35265.35.1.1.3.1.1.17	ColumneltexErpsMgmtRAPSProtectionVlanRangeList2049to3072	read-write	current	This object indicates the VLAN range (2049-3072) that belongs to the protection VLANs.
1.3.6.1.4.1.35265.35.1.1.3.1.1.18	ColumneltexErpsMgmtRAPSProtectionVlanRangeList3073to4094	read-write	current	This object indicates the VLAN range (3073-4094) that belongs to the protection VLANs.
1.3.6.1.4.1.35265.35.1.1.3.1.1.19	ColumneltexErpsMgmtRAPSRevertive	read-write	current	This indicates the revertive mode.
1.3.6.1.4.1.35265.35.1.1.3.1.1.20	ColumneltexErpsMgmtRAPSProtocolVersion	read-write	current	This object indicates the ERPS protocol compatibility with other versions of ITU-T G.8032.
1.3.6.1.4.1.35265.35.1.1.3.1.1.21	ColumneltexErpsMgmtRAPSPortForcedSwitch	read-write	current	Forced switch port.
1.3.6.1.4.1.35265.35.1.1.3.1.1.22	ColumneltexErpsMgmtRAPSPortManualSwitch	read-write	current	Manual switch port.
1.3.6.1.4.1.35265.35.1.1.3.1.1.23	ColumneltexErpsMgmtRAPSRowStatus	read-create	current	This object indicates the RowStatus of this entry.
1.3.6.1.4.1.35265.35.1.1.3.2	TableeltexErpsMgmtSubRingCtrlTable	not-accessible	current	This table contains ERPS sub-ring configuration information.
1.3.6.1.4.1.35265.35.1.1.3.2.1	RoweltexErpsMgmtSubRingCtrlEntry	not-accessible	current	A list of ERPS sub-ring configuration information.
1.3.6.1.4.1.35265.35.1.1.3.2.1.1	ColumneltexErpsMgmtSubRingCtrlRAPSVlanId	not-accessible	current	The RAPS VLAN is an index of configuration.
1.3.6.1.4.1.35265.35.1.1.3.2.1.2	ColumneltexErpsMgmtSubRingCtrlSubRingRAPSVlanId	not-accessible	current	This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
1.3.6.1.4.1.35265.35.1.1.3.2.1.3	ColumneltexErpsMgmtSubRingCtrlTCPropagationState	read-write	current	This indicates the state of sub-ring topology change propagation.
1.3.6.1.4.1.35265.35.1.1.3.2.1.4	ColumneltexErpsMgmtSubRingCtrlRowStatus	read-create	current	This object indicates the RowStatus of this entry.
1.3.6.1.4.1.35265.35.1.1.4	NodeeltexErpsNotify
1.3.6.1.4.1.35265.35.1.1.4.0	NodeeltexErpsNotifyPrefix
1.3.6.1.4.1.35265.35.1.1.4.0.1	NotificationeltexErpsSFDetectedTrap		current	When the signal fail occurs, a trap will be generated.
1.3.6.1.4.1.35265.35.1.1.4.0.2	NotificationeltexErpsSFClearedTrap		current	When the signal fail clears, a trap will be generated.
1.3.6.1.4.1.35265.35.1.1.4.0.3	NotificationeltexErpsRPLOwnerConflictTrap		current	When a conflict occurs, a trap will be generated.
1.3.6.1.4.1.35265.35.1.1.4.2	NodeeltexErpsNotificationBindings
1.3.6.1.4.1.35265.35.1.1.4.2.1	ScalareltexErpsNodeId	accessible-for-notify	current	This used trap object means the node MAC.

Type Definitions

Name	Syntax	Status	Description
EltexErpsEnabledState	INTEGER { enabled (1), disabled (2) }	current	Indicates whether the state of object is enabled or disabled.
EltexErpsMgmtRAPSPortId	INTEGER { none(1), west(2), east(3) }	current	Ethernet ring port id.
EltexErpsMgmtRAPSPortState	INTEGER { fowarding(1), blocking(2), signal-fail(3), manual-switch(4), forced-switch(5) }	current	Indicates Ethernet ring port state.