MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

ELTEX-MES-AAA-STATISTICS-MIB

40 objects

No module-level DESCRIPTION found.

Imported Objects

ELTEX-MES-MNG-MIB	eltMesAAAStatMIB
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-SMI	Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	-- RFC2851 TruthValue DisplayString TEXTUAL-CONVENTION

OID	Name	Access	Status	Description
1.3.6.1.4.1.35265.1.23.1.3.1	ScalareltRadiusAuthServTotalAccessRequests	read-only	current	The number of packets received on the authentication port.
1.3.6.1.4.1.35265.1.23.1.3.2	ScalareltRadiusAuthServTotalAccessAccepts	read-only	current	The number of RADIUS Access-Accept packets sent.
1.3.6.1.4.1.35265.1.23.1.3.3	ScalareltRadiusAuthServAccessRejects	read-only	current	The number of RADIUS Access-Reject packets sent.
1.3.6.1.4.1.35265.1.23.1.3.4	ScalareltRadiusAuthServAccessChallenges	read-only	current	The number of RADIUS Access-Challenge packets sent.
1.3.6.1.4.1.35265.1.23.1.3.5	ScalareltRadiusAuthServAverageResponseDelay	read-only	current	Average response delay(ms) Average time from when the packet was first transmitted to when it received a response. If the response timed out and the packet was…
1.3.6.1.4.1.35265.1.23.1.3.6	ScalareltRadiusAuthServMaximumResponseDelay	read-only	current	Maximum response delay(ms) Maximum delay observed while gathering average response delay information.
1.3.6.1.4.1.35265.1.23.1.3.7	ScalareltRadiusAuthServTotalTimeouts	read-only	current	Number of times a server did not respond, and the RADIUS server re-sent the packet.
1.3.6.1.4.1.35265.1.23.1.3.8	ScalareltRadiusAuthServTotalMalformedAccessRequests	read-only	current	The number of malformed RADIUS Access-Request packets received. Bad authenticators and unknown types are not included as malformed Access-Requests.
1.3.6.1.4.1.35265.1.23.1.3.9	ScalareltRadiusAuthServMaximumBufferSize	read-only	current	The maximum buffer size in bytes.
1.3.6.1.4.1.35265.1.23.1.3.10	ScalareltRadiusAuthServTotalPacketsDropped	read-only	current	The number of incoming packets silently discarded for some reason other than malformed, bad authenticators or unknown types.
1.3.6.1.4.1.35265.1.23.1.3.11	ScalareltRadiusAccServTotalRequests	read-only	current	The number of packets received on the accounting port.
1.3.6.1.4.1.35265.1.23.1.3.12	ScalareltRadiusAccServTotalDupRequests	read-only	current	The number of duplicate RADIUS Accounting-Request packets received.
1.3.6.1.4.1.35265.1.23.1.3.13	ScalareltRadiusAccServTotalResponses	read-only	current	The number of RADIUS Accounting-Response packets sent.
1.3.6.1.4.1.35265.1.23.1.3.14	ScalareltRadiusAccServAverageResponseDelay	read-only	current	Average response delay(ms) Average time from when the packet was first transmitted to when it received a response. If the response timed out and the packet was…
1.3.6.1.4.1.35265.1.23.1.3.15	ScalareltRadiusAccServMaximumResponseDelay	read-only	current	Maximum response delay(ms) Maximum delay observed while gathering average response delay information.
1.3.6.1.4.1.35265.1.23.1.3.16	ScalareltRadiusAccServTotalTimeouts	read-only	current	Number of times a server did not respond, and the RADIUS server re-sent the packet.
1.3.6.1.4.1.35265.1.23.1.3.17	ScalareltRadiusAccServTotalMalformedAccessRequests	read-only	current	The number of malformed RADIUS Accounting-Request packets received. Bad authenticators or unknown types are not included as malformed Access-Requests.
1.3.6.1.4.1.35265.1.23.1.3.18	ScalareltRadiusAccServMaximumBufferSize	read-only	current	The maximum buffer size in bytes.
1.3.6.1.4.1.35265.1.23.1.3.19	ScalareltRadiusAccServTotalPacketsDropped	read-only	current	The number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types.
1.3.6.1.4.1.35265.1.23.1.3.20	TableeltTacacsStatsTable	not-accessible	current	This table contains the statistics for the TACACS+ servers.
1.3.6.1.4.1.35265.1.23.1.3.20.1	RoweltTacacsStatsEntry	not-accessible	current	AEntry is TACACS + server, containing its statistics.
1.3.6.1.4.1.35265.1.23.1.3.20.1.1	ColumneltTacacsServerAddress	read-write	current	The IP address of the TACACS+ server referred to in this table entry.
1.3.6.1.4.1.35265.1.23.1.3.20.1.2	ColumneltTacacsSocketOpens	read-write	current	Number of successful TCP socket connections to the TACACS+ server.
1.3.6.1.4.1.35265.1.23.1.3.20.1.3	ColumneltTacacsSocketCloses	read-write	current	Number of successfully closed TCP socket attempts.
1.3.6.1.4.1.35265.1.23.1.3.20.1.4	ColumneltTacacsSocketAborts	read-write	current	Number of premature TCP socket closures to the TACACS+ server; that is, the peer did not wait for a reply from the server after a the peer sent its request.
1.3.6.1.4.1.35265.1.23.1.3.20.1.5	ColumneltTacacsSocketErrors	read-write	current	Any other socket read or write errors, such as incorrect packet format and length.
1.3.6.1.4.1.35265.1.23.1.3.20.1.6	ColumneltTacacsSocketTimeouts	read-write	current	Number of times a server did not respond.
1.3.6.1.4.1.35265.1.23.1.3.20.1.7	ColumneltTacacsFailesConnAttemps	read-write	current	Number of failed TCP socket connections to the TACACS+ server.
1.3.6.1.4.1.35265.1.23.1.3.20.1.8	ColumneltTacacsTotalPackageSent	read-write	current	Number of packets sent to the TACACS+ server.
1.3.6.1.4.1.35265.1.23.1.3.20.1.9	ColumneltTacacsTotalPackageRecv	read-write	current	Number of packets received from the TACACS+ server.
1.3.6.1.4.1.35265.1.23.1.3.21	TableeltRadiusServerStatusTable	not-accessible	current	The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
1.3.6.1.4.1.35265.1.23.1.3.21.1	RoweltRadiusServerStatusEntry	not-accessible	current	An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
1.3.6.1.4.1.35265.1.23.1.3.21.1.1	ColumneltRadiusServerAddressType	read-write	current	The Inet address type of RADIUS server reffered to in this table entry .IPv6Z type is not supported.
1.3.6.1.4.1.35265.1.23.1.3.21.1.2	ColumneltRadiusServerAddress	read-write	current	The IP address of the RADIUS server referred to in this table entry.
1.3.6.1.4.1.35265.1.23.1.3.21.1.3	ColumneltRadiusServerAuthPortNumber	read-write	current	The UDP port the client is using to send authentication requests to this server.
1.3.6.1.4.1.35265.1.23.1.3.21.1.4	ColumneltRadiusServerAcctPortNumber	read-write	current	The UDP port the client is using to send accounting requests to this server.
1.3.6.1.4.1.35265.1.23.1.3.21.1.5	ColumneltRadiusServerAuthClientTimeouts	read-only	current	The timeouts this RADIUS server to reply.
1.3.6.1.4.1.35265.1.23.1.3.21.1.6	ColumneltRadiusServerDeadStatus	read-only	current	The dead status for this RADIUS server.
1.3.6.1.4.1.35265.1.23.1.3.21.1.7	ColumneltRadiusServerRemainDeadTime	read-only	current	The remain dead time for this RADIUS server.
1.3.6.1.4.1.35265.1.23.1.3.22	ScalareltRadiusServerStatusReset	read-write	current	Reset dead status for all RADIUS servers.