ELTEX-MES-BRIDGE-EXT-MIB
105 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort Timeout |
| BRIDGE-MIB-A MISSING | MacAddress |
| ELTEX-MES-MNG-MIB | eltMesBridgeExtMIB |
| Q-BRIDGE-MIB | VlanId VlanIndex |
| RADLAN-BRIDGEMIBOBJECTS-MIB | rldot1sMstpInstanceEntry rldot1sMstpInstancePortEntry |
| RFC1155-SMI | Counter |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.1.23.1.401.0 | NodeeltMesBridgeExtMIBObjects | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.0 | NodeeltMesBridgeExtMacLearning | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.0.1 | TableeltBridgeExtMacLearningVlanTable | not-accessible | current | Per VLAN MAC learning table. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1 | RoweltBridgeExtMacLearningVlanEntry | not-accessible | current | VLAN MAC learning entry. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1.1 | ColumneltBridgeExtMacLearningVlanIndex | not-accessible | current | Indicates the VLAN number. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1.2 | ColumneltBridgeExtMacLearningVlanEnabled | read-create | current | Indicates whether the MAC addresses learning is enabled in this VLAN or not. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.0.2 | ScalareltBridgeExtMacLearningRelearnCached | read-write | current | Allows installing a new MAC address in the data plane even if the address is already cached in the control plane's table. This option may improve address learn… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3 | NodeeltMesBridgeMstp | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4 | Tableeltdot1sMstpInstanceTable | not-accessible | current | A table that contains STP/RSTP/MSTP. Configurations for STP and RSTP are stored in the zero instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1 | Roweltdot1sMstpInstanceEntry | not-accessible | current | A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.1 | Columneltdot1sMstpInstanceLastTopologyChangePort | read-only | current | This value contain port ifIndex from which the request about the last change of topology came. If value is 0 - topology wasn't changed yet. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.2 | Columneltdot1sMstpInstanceTcProtectionEnable | read-write | current | Indicates the status of TC Protection feature. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.3 | Columneltdot1sMstpInstanceTcProtectionInterval | read-write | current | The time taken by the switch to process the maximum of TC BPDUs. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.4 | Columneltdot1sMstpInstanceTcProtectionThresholdValue | read-write | current | The maximum number of MAC entry flushes that the device can perform within set interval. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.5 | Columneltdot1sMstpInstanceNumOfTcBpduHandled | read-only | current | The number of topology change BPDU handled by the current instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.5 | Tableeltdot1sMstpInstancePortTable | not-accessible | current | A table that contains pair <msti, port> specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.5.1 | Roweltdot1sMstpInstancePortEntry | not-accessible | current | A list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.3.5.1.1 | Columneltdot1sMstpInstancePortRestrictedRole | read-write | current | If TRUE causes the Port not to be selected as Root Port for the MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5 | NodeeltMesBridgeStp | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.1 | TableeltBridgeStpConfigPortTable | not-accessible | current | Port configuration table for Spanning Tree Protocol. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1 | RoweltBridgeStpConfigPortEntry | not-accessible | current | Port configuration entry for Spanning Tree Protocol. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1.1 | ColumneltBridgeStpConfigPortGroupMacAddress | read-write | current | Sets destination MAC address for Bridge PDUs. A port sends and receives BPDUs only with specified group MAC address. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1.2 | ColumneltBridgeStpConfigPortRestrictedTcn | read-write | current | Configure filtering of Spanning Tree BPDUs with TC flag set. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.2 | Scalareltdot1dStpLastTopologyChangePort | read-only | current | This value contain port ifIndex from which the request about the last change of topology came. If value is 0 - topology wasn't changed yet. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3 | NodeeltBridgeStpInconsistencyObjects | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.1 | ScalareltBridgeStpLoopGuardGlobalDefaultMode | read-write | current | Indicates the global default config mode of LoopGuard feature on the device. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2 | TableeltBridgeStpLoopGuardConfigTable | not-accessible | current | A table containing a list of the bridge ports for which Spanning Tree LoopGuard capability can be configured. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1 | RoweltBridgeStpLoopGuardConfigEntry | not-accessible | current | A entry of table with a list of bridge ports for which Spanning Tree LoopGuard capability can be configured. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1.1 | ColumneltBridgeStpLoopGuardConfigPortIndex | read-write | current | The value of dot1dBasePort for bridge port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1.2 | ColumneltBridgeStpLoopGuardConfigMode | read-write | current | Indicates the mode of LoopGuard feature on this port. This configuration will be applied to all the spanning tree instances in which this port exists. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3 | TableeltBridgeStpInconsistencyTable | not-accessible | current | A table containing a list of the bridge ports for which a particular Spanning Tree instance has been found to have some inconsistent state. The agent creates a… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1 | RoweltBridgeStpInconsistencyEntry | not-accessible | current | A Spanning Tree instance on a particular port for which a Spanning Tree inconsistent state is currently in effect. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.1 | ColumneltBridgeStpInconsistencyIndex | read-write | current | The spanning tree instance id. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.2 | ColumneltBridgeStpInconsistencyPortIndex | read-write | current | The value of dot1dBasePort for bridge port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.3 | ColumneltBridgeStpInconsistencyState | read-only | current | Indicates whether the port in a particular Spanning Tree instance is currently in inconsistent state or not. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.4 | NodeeltBridgeStpTcProtectionObjects | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.4.1 | ScalareltBridgeStpTcProtectionEnable | read-write | current | Indicates the status of TC Protection feature. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.4.2 | ScalareltBridgeStpTcProtectionInterval | read-write | current | The time taken by the switch to process the maximum of TC BPDUs. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.4.3 | ScalareltBridgeStpTcProtectionThresholdValue | read-write | current | The maximum number of MAC table flushes that the device can perform within set interval. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.5 | NodeeltBridgeStpBridgeCounters | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.5.5.1 | ScalareltBridgeStpNumOfTcBpduHandled | read-only | current | The number of topology change BPDU handled by the current bridge. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6 | NodeeltMesBridgePvst | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1 | TableeltBridgePvstConfigTable | not-accessible | current | A table that contains configuration for each PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1 | RoweltBridgePvstConfigEntry | not-accessible | current | An entry that contains configuration of the certain PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.1 | ColumneltBridgePvstVlanIndex | not-accessible | current | VLAN tag that identifies PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.2 | ColumneltBridgePvstConfigEnable | read-write | current | Indicates the status of PVST instance |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.3 | ColumneltBridgePvstConfigFwdDelay | read-write | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.4 | ColumneltBridgePvstConfigHelloTime | read-write | current | The amount of time between the transmission of Configuration PDUs by this node on VLAN's ports when it is the root of the spanning tree or trying to become so,… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.5 | ColumneltBridgePvstConfigMaxAge | read-write | current | The maximum age of PVST information learned from the network on any VLAN's port before it is discarded, in units of hundredths of a second. This is the actual … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.6 | ColumneltBridgePvstConfigPriority | read-write | current | The value of the writable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID ORed (logical addition) with current VLAN ID. Th… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.7 | ColumneltBridgePvstConfigFilterBpdu | read-write | current | Specified if PVST-instance should filter BPDUs when STP is disabled. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.8 | ColumneltBridgePvstConfigTcProtectionEnable | read-write | current | Indicates the status of TC Protection feature. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.9 | ColumneltBridgePvstConfigTcProtectionInterval | read-write | current | The time taken by the switch to process the maximum of TC BPDUs. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.10 | ColumneltBridgePvstConfigTcProtectionThresholdValue | read-write | current | The maximum number of MAC entry flushes that the device can perform within set interval. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.11 | ColumneltBridgePvstConfigLoopGuardDefault | read-write | current | Indicates status of loopguard feature. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2 | TableeltBridgePvstPortConfigTable | not-accessible | current | A table that contains port specific configuration for each PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1 | RoweltBridgePvstPortConfigEntry | not-accessible | current | An entry that contains port specific configuration of the certain PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.1 | ColumneltBridgePvstPortIndex | not-accessible | current | The index of port that belogns to specific VLAN. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.2 | ColumneltBridgePvstPortConfigEnable | read-write | current | Indicates the status of PVST instance on the specific port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.3 | ColumneltBridgePvstPortConfigPathCost | read-only | current | The contribution of this port in the configured VLAN to the path cost of paths towards the PVST root which include this port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.4 | ColumneltBridgePvstPortConfigAdminPathCost | read-write | current | Field for manual port cost configuration. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.5 | ColumneltBridgePvstPortConfigPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.6 | ColumneltBridgePvstPortConfigAutoEdgePort | read-write | current | If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.7 | ColumneltBridgePvstPortConfigAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.8 | ColumneltBridgePvstPortConfigGuardMode | read-write | current | Indicates the mode of loop guard feature on this instance's port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.9 | ColumneltBridgePvstPortConfigRestrictedTcn | read-write | current | Configure filtering of Spanning Tree BPDUs with TC flag set. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3 | TableeltBridgePvstStatusTable | not-accessible | current | A table that contains status for each PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1 | RoweltBridgePvstStatusEntry | not-accessible | current | An entry that contains status of the certain PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.1 | ColumneltBridgePvstStatusDesignatedRoot | read-only | current | The unique Bridge Identifier of the Root Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which t… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.2 | ColumneltBridgePvstStatusRootFwdDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.3 | ColumneltBridgePvstStatusRootHelloTime | read-only | current | The amount of time between the transmission of Configuration PDUs by this node on VLAN's ports when it is the root of the spanning tree or trying to become so,… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.4 | ColumneltBridgePvstStatusRootMaxAge | read-only | current | The maximum age of PVST information learned from the network on any VLAN's port before it is discarded, in units of hundredths of a second. This is the actual … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.5 | ColumneltBridgePvstStatusRootPriority | read-only | current | The value of the writable portion of the Root Bridge ID, i.e., the first two octets of the (8 octet long) Root Bridge ID ORed (logical addition) with Root VLAN… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.6 | ColumneltBridgePvstStatusRootPort | read-only | current | The port number of the port which offers the lowest cost path from this VLAN-instance to the root VLAN instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.7 | ColumneltBridgePvstStatusRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.8 | ColumneltBridgePvstStatusNumOfTcBpduHandled | read-only | current | The number of topology change BPDU handled by the current instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4 | TableeltBridgePvstPortStatusTable | not-accessible | current | A table that contains port specific status for each PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1 | RoweltBridgePvstPortStatusEntry | not-accessible | current | An entry that contains port specific status of the certain PVST instance. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.1 | ColumneltBridgePvstPortStatusPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.2 | ColumneltBridgePvstPortStatusPortRole | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.3 | ColumneltBridgePvstPortStatusDesigRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.4 | ColumneltBridgePvstPortStatusDesigCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.5 | ColumneltBridgePvstPortStatusDesigBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.6 | ColumneltBridgePvstPortStatusDesigPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.7 | ColumneltBridgePvstPortStatusOperEdgePort | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of eltBridgePvstPortConfigAdminEdgePort and is set FALSE on reception … |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.8 | ColumneltBridgePvstPortStatusInconsistencyState | read-only | current | Guard mode of VLAN's port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.5 | TableeltBridgePvstAuxStatusTable | not-accessible | current | A table that contains real operational and administrative statuses for each PVST instance that was created in the system. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1 | RoweltBridgePvstAuxStatusEntry | not-accessible | current | An entry that contains real operational and administrative statuses for each PVST instance that was created in the system. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1.1 | ColumneltBridgePvstAuxOperStatus | read-only | current | Indicates the status of PVST instance on the specific port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1.2 | ColumneltBridgePvstAuxAdminStatus | read-only | current | Indicates the administrative status of PVST instance on the specific port. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7 | NodeeltMesdot1qTp | |||
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1 | Tableeltdot1qTpFdbPortTable | not-accessible | current | This table contains port index, vlan number, Mac address related to this port and status of this Mac address. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1 | Roweltdot1qTpFdbPortEntry | not-accessible | current | An entry contains port index, vlan number, Mac address related to this port and status of this Mac address. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.1 | Columneltdot1qTpFdbPort | not-accessible | current | Port index |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.2 | Columneltdot1qTpFdbPortFdbId | not-accessible | current | The identity of Filtering Database. |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.3 | Columneltdot1qTpFdbPortAddress | not-accessible | current | Mac address related to this port |
| 1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.4 | Columneltdot1qTpFdbPortStatus | read-only | current | The status of this Mac address. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EltBridgePvstEnableType | INTEGER { enabled(1), disabled(2), notApplicable(3) } | current | The status of PVST instance. |
| EltBridgeStpGroupMacAddressType | INTEGER { dot1d (1), dot1ad (2) } | current | Type of STP BPDU destination MAC address |
| EltBridgeStpGuardModeType | INTEGER { root (1), loop (2), none (3), default (4) } | current | STP port guard modes. |
| EltBridgeStpInconsistencyStateType | INTEGER { none (1), loop (2), root (3) } | current | STP inconsistency state type. |
| EltBridgeStpLoopGuardConfigMode | INTEGER { enable (1), disable (2), default (3) } | current | STP loop guard mode. |
| EltBridgeStpPortConnectionType | INTEGER { p2p(1), shared(2) } | current | The connection type of port. |
| EltBridgeStpPortRoleType | INTEGER { unknown(1), disabled(2), alternate(3), backup(4), root(5), designated(6), master(7) } | current | The status of port in the spanning-tree. |
| EltBridgeStpPortStateType | INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } | current | The status of port in the spanning-tree. |