ELTEX-MES-ISS-QOS-MIB
38 objects
Access Control List Meters MIB definitions.
Imported Objects
| ARICENT-QOS-MIB | fsQosHwCpuMaxRate fsQosHwCpuQId fsQosHwCpuRateLimitEntry fsQoSMeterEntry |
| ELTEX-MES-ISS-MIB | eltMesIss |
| IF-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.1.139.5 | IdentityeltMesIssQoSMIB | Access Control List Meters MIB definitions. | ||
| 1.3.6.1.4.1.35265.1.139.5.1 | NodeeltMesIssQoSObjects | |||
| 1.3.6.1.4.1.35265.1.139.5.1.1 | NodeeltMesIssQoSGlobals | |||
| 1.3.6.1.4.1.35265.1.139.5.1.1.1 | ScalareltMesIssQoSTrustMode | read-write | current | This scalar defines the global QoS trust operation mode. |
| 1.3.6.1.4.1.35265.1.139.5.1.2 | NodeeltMesIssQoSMetering | |||
| 1.3.6.1.4.1.35265.1.139.5.1.2.1 | TableeltMesIssQoSMeterTable | not-accessible | current | This table augments the FsQoSMeterTable table. |
| 1.3.6.1.4.1.35265.1.139.5.1.2.1.1 | RoweltMesIssQoSMeterEntry | not-accessible | current | An entry appears in this table for each ACL/QOS meter. |
| 1.3.6.1.4.1.35265.1.139.5.1.2.1.1.1 | ColumneltMesIssQoSMeterUnits | read-write | current | Meter units. Supports byte mode or packet mode for each meter. |
| 1.3.6.1.4.1.35265.1.139.5.1.3 | NodeeltMesIssQoSTrafficMgmt | |||
| 1.3.6.1.4.1.35265.1.139.5.1.3.1 | TableeltMesIssQoSPortTrustModeTable | not-accessible | current | This table contains QoS trust mode configuration for an interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.3.1.1 | RoweltMesIssQoSPortTrustModeEntry | not-accessible | current | An entry appears in this table for each interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.3.1.1.1 | ColumneltMesIssQoSPortTrustMode | read-write | current | QoS trust mode on specific interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.4 | NodeeltMesIssQoSRemarking | |||
| 1.3.6.1.4.1.35265.1.139.5.1.4.1 | TableeltMesIssQoSRemarkPortTable | not-accessible | current | This table contains QoS remarking configuration per interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.4.1.1 | RoweltMesIssQoSRemarkPortEntry | not-accessible | current | An entry appears in this table for each interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.4.1.1.1 | ColumneltMesIssQoSRemarkPortCosEnable | read-write | current | Enable CoS remarking for packets transmitted from the interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.4.1.1.2 | ColumneltMesIssQoSRemarkPortDscpEnable | read-write | current | Enable DSCP remarking for packets transmitted from the interface. |
| 1.3.6.1.4.1.35265.1.139.5.1.4.1.1.3 | ColumneltMesIssQoSRemarkPortDefaultCosSource | read-write | current | Changes the source of the default egress CoS value. |
| 1.3.6.1.4.1.35265.1.139.5.1.5 | NodeeltMesIssQoSInterfaces | |||
| 1.3.6.1.4.1.35265.1.139.5.1.5.1 | TableeltMesIssQoSIfUtilizationTable | not-accessible | current | Switch ports utilization configuration and information. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1 | RoweltMesIssQoSIfUtilizationEntry | not-accessible | current | Defines the contents of each line in the eltMesIssQoSIfUtilizationTable table. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.1 | ColumneltMesIssQoSIfUtilizationIfIndex | not-accessible | current | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.2 | ColumneltMesIssQoSIfUtilizationInterval | not-accessible | current | A time in seconds for which interface utilization is calculated. Supported values are 5, 60 and 300. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.3 | ColumneltMesIssQoSIfUtilizationInPkts | read-only | current | The total number of all (UC, MC and BC) packets received on the interface during last utilization interval. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.4 | ColumneltMesIssQoSIfUtilizationInRate | read-only | current | The inbound rate in kbps on the interface during last utilization interval. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.5 | ColumneltMesIssQoSIfUtilizationOutPkts | read-only | current | The total number of all (UC, MC and BC) packets sent out of the interface during last utilization interval. |
| 1.3.6.1.4.1.35265.1.139.5.1.5.1.1.6 | ColumneltMesIssQoSIfUtilizationOutRate | read-only | current | The outbound rate in kbps on the interface during last utilization interval. |
| 1.3.6.1.4.1.35265.1.139.5.1.6 | NodeeltMesIssQoSCpuRateControl | |||
| 1.3.6.1.4.1.35265.1.139.5.1.6.1 | TableeltMesIssQoSCpuRateLimitTable | not-accessible | current | QoS CPU rate-limit table |
| 1.3.6.1.4.1.35265.1.139.5.1.6.1.1 | RoweltMesIssQoSCpuRateLimitEntry | not-accessible | current | QoS CPU rate-limit entry |
| 1.3.6.1.4.1.35265.1.139.5.1.6.1.1.1 | ColumneltMesIssQoSCpuRateLimitLoggingEnable | read-write | current | Disable or enable cpu rate-limit logging |
| 1.3.6.1.4.1.35265.1.139.5.1.6.1.1.2 | ColumneltMesIssQoSCpuRateLimitTrapEnable | read-write | current | Disable or enable cpu rate-limit traps |
| 1.3.6.1.4.1.35265.1.139.5.2 | NodeeltMesIssQoSNotifications | |||
| 1.3.6.1.4.1.35265.1.139.5.2.0 | NodeeltMesIssQoSNotificationsPrefix | |||
| 1.3.6.1.4.1.35265.1.139.5.2.0.1 | NotificationeltMesIssQoSCpuRateLimitTrap | current | A eltMesIssQoSCpuRateLimitTrap is generated when exceeded threshold value for CPU queue input rate. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EltMesIssMeterUnits | INTEGER { bytes(1), packets(2) } | current | Meter units. |
| EltMesIssQoSRemarkPortDefaultCosSource | INTEGER { none(1), user-priority(2), inner-vlanPri(3) } | current | This type describes the source of the default CoS value when adding outer tag to the packet. If none(1) source is specified, then the CoS value will be 0. If user-priority(2) source is specified, then the CoS value will… |
| EltMesIssQoSTrustMode | INTEGER { none(1), cos(2), dscp(3), cos-dscp(4) } | current | Specifies QoS trust mode. |