ELTEX-MES-PHYSICAL-DESCRIPTION-MIB
40 objects
The private MIB module definition for physical device configuration and information.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.1.23.53 | IdentityeltMesPhysicalDescription | The private MIB module definition for physical device configuration and information. | ||
| 1.3.6.1.4.1.35265.1.23.53.1 | NodeeltMesPhdTransceiver | |||
| 1.3.6.1.4.1.35265.1.23.53.1.1 | TableeltPhdTransceiverInfoTable | not-accessible | current | This table show the information of transceiver on interface. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1 | RoweltPhdTransceiverInfoEntry | not-accessible | current | The entry of the eltPhdTransceiverInfoTable. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.1 | ColumneltPhdTransceiverInfoConnectorType | read-only | current | Connector type of the interface. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.2 | ColumneltPhdTransceiverInfoType | read-only | current | Type of the interface, such as SFP/XFP/GBIC. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.3 | ColumneltPhdTransceiverInfoComplianceCode | read-only | current | Compliance code read from the transceiver. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.4 | ColumneltPhdTransceiverInfoWaveLength | read-only | current | Wave length of the interface, measured in nanometer. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.5 | ColumneltPhdTransceiverInfoVendorName | read-only | current | Vendor name of the interface. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.6 | ColumneltPhdTransceiverInfoSerialNumber | read-only | current | Serial number of the interface. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.7 | ColumneltPhdTransceiverInfoFiberDiameterType | read-only | current | The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber … |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.8 | ColumneltPhdTransceiverInfoTransferDistance | read-only | current | The maximal distance which the interface could transmit, measured in meter. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.9 | ColumneltPhdTransceiverInfoDiagnostic | read-only | current | Indicating whether the digital diagnostic monitoring function is supported or not. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.10 | ColumneltPhdTransceiverInfoPartNumber | read-only | current | Part number provided by SFP vendor. |
| 1.3.6.1.4.1.35265.1.23.53.1.1.1.11 | ColumneltPhdTransceiverInfoVendorRev | read-only | current | Revision level for part number provided by vendor. |
| 1.3.6.1.4.1.35265.1.23.53.1.2 | TableeltPhdTransceiverThresholdTable | not-accessible | current | This table contains the threshold information of transceiver. |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1 | RoweltPhdTransceiverThresholdEntry | not-accessible | current | The entry of the eltPhdTransceiverThresholdTable. |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.1 | ColumneltPhdTransceiverThresholdType | read-only | current | A value indicating the threshold to configure. temperature - degree (Celsius) -127-127, voltage - microVolt 0-6550000, current - microAmper 0-131000, output po… |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.2 | ColumneltPhdTransceiverThresholdAction | read-only | current | What action to perform when value is bad. |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.3 | ColumneltPhdTransceiverThresholdHighAlarm | read-only | current | See eltPhdTransceiverThresholdType for details |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.4 | ColumneltPhdTransceiverThresholdHighWarning | read-only | current | See eltPhdTransceiverThresholdType for details |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.5 | ColumneltPhdTransceiverThresholdLowWarning | read-only | current | See eltPhdTransceiverThresholdType for details |
| 1.3.6.1.4.1.35265.1.23.53.1.2.1.6 | ColumneltPhdTransceiverThresholdLowAlarm | read-only | current | See eltPhdTransceiverThresholdType for details |
| 1.3.6.1.4.1.35265.1.23.53.2 | TableeltPhdUnitGenParamTable | not-accessible | current | For each module (board) there is an entry describing it in this module |
| 1.3.6.1.4.1.35265.1.23.53.2.1 | RoweltPhdUnitGenParamEntry | not-accessible | current | This table augments existing RADLAN table rlPhdUnitGenParamTable |
| 1.3.6.1.4.1.35265.1.23.53.2.1.1 | ColumneltPhdUnitGenParamCommitHash | read-only | current | Hash of current commit. |
| 1.3.6.1.4.1.35265.1.23.53.2.1.2 | ColumneltPhdUnitGenParamBuildTag | read-only | current | Build branch. |
| 1.3.6.1.4.1.35265.1.23.53.2.1.3 | ColumneltPhdUnitGenParamBuildNumber | read-only | current | Build describe number. |
| 1.3.6.1.4.1.35265.1.23.53.3 | TableeltCascadeTable | not-accessible | current | This table augments existing RADLAN table rlCascadeTable. |
| 1.3.6.1.4.1.35265.1.23.53.3.1 | RoweltCascadeEntry | not-accessible | current | An entry of this table specifies a cascaded link information in a unit |
| 1.3.6.1.4.1.35265.1.23.53.3.1.1 | ColumneltCascadeLastChange | read-only | current | The value of sysUpTime at the time the cascade interface entered its current operational state. |
| 1.3.6.1.4.1.35265.1.23.53.3.1.2 | ColumneltCascadeOperStatus | read-only | current | This variable indicates the state of this interface. |
| 1.3.6.1.4.1.35265.1.23.53.3.1.3 | ColumneltCascadeDuplexOperMode | read-only | current | This variable indicates whether this interface operates in half duplex or full duplex mode. |
| 1.3.6.1.4.1.35265.1.23.53.3.1.4 | ColumneltCascadeOperSpeedDuplexAutoNegotiation | read-only | current | If enabled the speed and duplex are determined by the device through the autonegotiation process. |
| 1.3.6.1.4.1.35265.1.23.53.3.1.5 | ColumneltCascadeOperMdix | read-only | current | cross - The interface is in crossover mode. normal - The interface is not in crossover mode. unknown - Only for port that its operative status is not present o… |
| 1.3.6.1.4.1.35265.1.23.53.3.1.6 | ColumneltCascadeTransceiverType | read-only | current | This variable indicates the transceiver type of this interface. |
| 1.3.6.1.4.1.35265.1.23.53.3.1.7 | ColumneltCascadeIfType | read-only | current | This variable specifies the type of interface. |
| 1.3.6.1.4.1.35265.1.23.53.4 | NodeeltMesPhdNsf | |||
| 1.3.6.1.4.1.35265.1.23.53.4.1 | ScalareltPhdNsfEnable | read-write | current | Enable Non-Stop Forwarding during the stack master switchover. |
| 1.3.6.1.4.1.35265.1.23.53.4.2 | ScalareltPhdNsfTime | read-write | current | Set the time period in which protocols wait for the new master to complete initialization. The port states set by the former master is preserved during this ti… |