MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

ELTEX-MES-eltInterfaces

16 objects

No module-level DESCRIPTION found.

Imported Objects

ELTEX-MES	eltMesSwInterfaces
IF-MIB	ifIndex InterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIB	PortList
RFC1155-SMI	Counter
SNMPv2-SMI	Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	RowStatus

OID	Name	Access	Status	Description
1.3.6.1.4.1.35265.1.23.43.1	TableeltSwIfTable	not-accessible	current	Switch media specific information and configuration of the device interfaces.
1.3.6.1.4.1.35265.1.23.43.1.1	RoweltSwIfEntry	not-accessible	current	Defines the contents of each line in the eltSwIfTable table.
1.3.6.1.4.1.35265.1.23.43.1.1.1	ColumneltSwIfIndex	read-only	current	Index to the eltSwIfTable. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB II).
1.3.6.1.4.1.35265.1.23.43.1.1.2	ColumneltSwIfSfpOperationMode	read-write	current	This variable indicates plugged in SFP transceiver operation mode.
1.3.6.1.4.1.35265.1.23.43.2	TableeltSwIfUtilizationTable	not-accessible	current	Switch ports utilization configuration and information.
1.3.6.1.4.1.35265.1.23.43.2.1	RoweltSwIfUtilizationEntry	not-accessible	current	Defines the contents of each line in the eltSwIfUtilizationTable table.
1.3.6.1.4.1.35265.1.23.43.2.1.1	ColumneltSwIfUtilizationIfIndex	read-only	current	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re…
1.3.6.1.4.1.35265.1.23.43.2.1.2	ColumneltSwIfUtilizationAverageTime	read-write	current	An average load time in seconds for which interface utilization is calculated.
1.3.6.1.4.1.35265.1.23.43.2.1.3	ColumneltSwIfUtilizationCurrentInPkts	read-only	current	The total number of all (UC, MC and BC) packets received on the interface during last 5 seconds.
1.3.6.1.4.1.35265.1.23.43.2.1.4	ColumneltSwIfUtilizationCurrentInRate	read-only	current	The inbound rate in kbit/sec on the interface during last 5 seconds.
1.3.6.1.4.1.35265.1.23.43.2.1.5	ColumneltSwIfUtilizationCurrentOutPkts	read-only	current	The total number of all (UC, MC and BC) packets sent out of the interface during last 5 seconds.
1.3.6.1.4.1.35265.1.23.43.2.1.6	ColumneltSwIfUtilizationCurrentOutRate	read-only	current	The outbound rate in kbit/sec on the interface during last 5 seconds.
1.3.6.1.4.1.35265.1.23.43.2.1.7	ColumneltSwIfUtilizationAverageInPkts	read-only	current	The total number of all (UC, MC and BC) packets received on the interface during configured load average time for this interface.
1.3.6.1.4.1.35265.1.23.43.2.1.8	ColumneltSwIfUtilizationAverageInRate	read-only	current	The inbound rate in kbit/sec on the interface during configured load average time for this interface.
1.3.6.1.4.1.35265.1.23.43.2.1.9	ColumneltSwIfUtilizationAverageOutPkts	read-only	current	The total number of all (UC, MC and BC) packets sent out of the interface during configured load average time for this interface.
1.3.6.1.4.1.35265.1.23.43.2.1.10	ColumneltSwIfUtilizationAverageOutRate	read-only	current	The outbound rate in kbit/sec on the interface during configured load average time for this interface.