ELTEX-POLICY-MIB
33 objects
The private MIB module definition generic traffic policy in Eltex devices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.1.23.59 | IdentityeltMesPolicy | The private MIB module definition generic traffic policy in Eltex devices. | ||
| 1.3.6.1.4.1.35265.1.23.59.2 | NodeeltPolicyClassifier | |||
| 1.3.6.1.4.1.35265.1.23.59.2.4 | TableeltPolicyClassifierTable | not-accessible | current | The table of Classifier statement. |
| 1.3.6.1.4.1.35265.1.23.59.2.4.1 | RoweltPolicyClassifierEntry | not-accessible | current | Classifiers can be of the ingress or post-routing phase varieties. Each multifield classification statement consists of the following parameters. |
| 1.3.6.1.4.1.35265.1.23.59.2.4.1.1 | ColumneltPolicyClassifierInListVlanId1To1024 | read-write | current | Classifier ingress VlanId List 1. |
| 1.3.6.1.4.1.35265.1.23.59.2.4.1.2 | ColumneltPolicyClassifierInListVlanId1025To2048 | read-write | current | Classifier ingress VlanId List 2. |
| 1.3.6.1.4.1.35265.1.23.59.2.4.1.3 | ColumneltPolicyClassifierInListVlanId2049To3072 | read-write | current | Classifier ingress VlanId List 3. |
| 1.3.6.1.4.1.35265.1.23.59.2.4.1.4 | ColumneltPolicyClassifierInListVlanId3073To4096 | read-write | current | Classifier ingress VlanId List 4. |
| 1.3.6.1.4.1.35265.1.23.59.3 | NodeeltPolicyMapping | |||
| 1.3.6.1.4.1.35265.1.23.59.3.1 | TableeltPolicyVptDscpTable | not-accessible | current | This table specifies The VPT to DSCP map table |
| 1.3.6.1.4.1.35265.1.23.59.3.1.1 | RoweltPolicyVptDscpEntry | not-accessible | current | Each entry in this table describes The DSCP assigned to a VPT value. The index is VPT represent by eltPolicyVptValue. |
| 1.3.6.1.4.1.35265.1.23.59.3.1.1.1 | ColumneltPolicyVptValue | read-only | current | VPT value. |
| 1.3.6.1.4.1.35265.1.23.59.3.1.1.2 | ColumneltPolicyDscpValue | read-write | current | DSCP value. |
| 1.3.6.1.4.1.35265.1.23.59.3.1.1.3 | ColumneltPolicyVptDscpStatus | read-write | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.35265.1.23.59.3.2 | TableeltPolicyTrustModeTable | not-accessible | current | Specifies The QoS trust mode for the interfaces in basic mode |
| 1.3.6.1.4.1.35265.1.23.59.3.2.1 | RoweltPolicyTrustModeEntry | not-accessible | current | Specifies The QoS trust mode for the interface in basic mode |
| 1.3.6.1.4.1.35265.1.23.59.3.2.1.1 | ColumneltPolicyTrustModePortMode | read-write | current | Defines the interface qos trust operation mode relevant for qos basic mode. |
| 1.3.6.1.4.1.35265.1.23.59.5 | NodeeltPolicyVlanConfiguration | |||
| 1.3.6.1.4.1.35265.1.23.59.5.1 | TableeltPolicyVlanConfigurationTable | not-accessible | current | This table enables the network administrator to fine-tune the rate limit in pps given to each vlan. The values in this table will thus override those of the rl… |
| 1.3.6.1.4.1.35265.1.23.59.5.1.1 | RoweltPolicyVlanCfgEntry | not-accessible | current | Configuration parameters for each vlan. |
| 1.3.6.1.4.1.35265.1.23.59.5.1.1.1 | ColumneltPolicyVlanCfgCirPortRateLimitPps | read-write | current | The CIR for the port Rate limit in packets per second. CIR equal to 0 means that the rate limit does not apply to traffic in this vlan. |
| 1.3.6.1.4.1.35265.1.23.59.5.1.1.2 | ColumneltPolicyVlanCfgCbsPortRateLimitPackets | read-write | current | The CBS for the port Rate Limit in packets. |
| 1.3.6.1.4.1.35265.1.23.59.6 | NodeeltPolicyMeterClass | |||
| 1.3.6.1.4.1.35265.1.23.59.6.1 | TableeltPolicyMeterClassTable | not-accessible | current | This table defines the Metering classes for the system. |
| 1.3.6.1.4.1.35265.1.23.59.6.1.1 | RoweltPolicyMeteringClassEntry | not-accessible | current | Each statement consists of the following parameters |
| 1.3.6.1.4.1.35265.1.23.59.6.1.1.1 | ColumneltPolicyMeteringClassAggregateMeterRatePps | read-write | current | The rate in packets per second of traffic considered within the bandwidth allocated for this policy entry. Rate equal to 0 means that the rate limit does not a… |
| 1.3.6.1.4.1.35265.1.23.59.6.1.1.2 | ColumneltPolicyMeteringClassAggregateMeterBurstSizePackets | read-write | current | The Burst Size parameter for the aggregate meter leaky bucket in packets |
| 1.3.6.1.4.1.35265.1.23.59.7 | NodeeltPolicyAction | |||
| 1.3.6.1.4.1.35265.1.23.59.7.2 | TableeltPolicyActionTable | not-accessible | current | This table defines the Actions for packets that pass the meter table ie. the characteristics that are assigned to packets before they reach the scheduler. |
| 1.3.6.1.4.1.35265.1.23.59.7.2.1 | RoweltPolicyActionEntry | not-accessible | current | Each multifield classification statement consists of the following parameters |
| 1.3.6.1.4.1.35265.1.23.59.7.2.1.1 | ColumneltPolicyPpsActionNonDsOutProfileDropPrecedence | read-write | current | This paramer is used at non diffserv mode to attached the drop precedence for packet OutProfile (metering), only if there is a support for drop precedence and … |
| 1.3.6.1.4.1.35265.1.23.59.7.2.1.2 | ColumneltPolicyPpsActionChangeDscpNonConform | read-write | current | If true, the packet is re-marked with the value indicated by newDscp for non conforming packets. If false, the packet's DSCP value is not changed |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EltPolicyTrustTypes | INTEGER { none(0), cos(1), dscp(2), cos-dscp(3) } | current | Configure the port trust state none - Do not classify ingress packets with the packet CoS/DSCP values. cos - Classifies ingress packets with the packet CoS values. For untagged packets, the port default CoS is used. dsc… |