MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

ELTEX-TUNNEL-MIB

13 objects

The MIB module for management of WiFi Tunnels, independent of the specific encapsulation scheme in use.

Imported Objects

ELTEX-SMI-ACTUAL	eltexLtd
IANAifType-MIB	IANAtunnelType
IF-MIB	ifIndex InterfaceIndexOrZero
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-SMI	Integer32 MODULE-IDENTITY OBJECT-TYPE transmission
SNMPv2-TC	RowStatus TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.35265.21	IdentityeltexTunnelMIB			The MIB module for management of WiFi Tunnels, independent of the specific encapsulation scheme in use.
1.3.6.1.4.1.35265.21.1	TabletunnelWiFiConfigTable	not-accessible	current	The (conceptual) table containing information on configured Wi-Fi tunnels. This table can be used to map a set of WiFi tunnel endpoints to the associated ifInd…
1.3.6.1.4.1.35265.21.1.1	RowtunnelWiFiConfigEntry	not-accessible	current	An entry (conceptual row) containing the information on a particular configured tunnel.
1.3.6.1.4.1.35265.21.1.1.1	ColumntunnelWiFiConfigLocalAddressType	not-accessible	current	The type of address in the corresponding tunnelWiFiConfigLocalAddress.
1.3.6.1.4.1.35265.21.1.1.2	ColumntunnelWiFiConfigLocalAddress	not-accessible	current	The address of the local endpoint of the Wi-Fi tunnel, or 0.0.0.0 if the device is free to choose any of its addresses at Wi-Fi tunnel establishment time.
1.3.6.1.4.1.35265.21.1.1.3	ColumntunnelWiFiConfigRemoteAddressType	not-accessible	current	The type of address in the corresponding tunnelWiFiConfigRemoteAddress.
1.3.6.1.4.1.35265.21.1.1.4	ColumntunnelWiFiConfigRemoteAddress	not-accessible	current	The address of the remote endpoint of the Wi-Fi tunnel.
1.3.6.1.4.1.35265.21.1.1.5	ColumntunnelWiFiConfigEncapsMethod	not-accessible	current	The encapsulation method used by the Wi-Fi tunnel.
1.3.6.1.4.1.35265.21.1.1.6	ColumntunnelWiFiConfigID	not-accessible	current	An identifier used to distinguish between multiple Wi-Fi tunnels of the same encapsulation method, with the same endpoints. If the encapsulation protocol only …
1.3.6.1.4.1.35265.21.1.1.7	ColumntunnelWiFiConfigIfIndex	read-only	current	If the value of tunnelWiFiConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the Wi-Fi tunnel interface. A va…
1.3.6.1.4.1.35265.21.1.1.8	ColumntunnelWiFiConfigStatus	read-create	current	The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn…
1.3.6.1.4.1.35265.21.1.1.9	ColumntunnelWiFiConfigMode	read-only	current	Type of Wi-Fi tunnel: notConfigured(0), management(1), data(2).
1.3.6.1.4.1.35265.21.1.1.10	ColumntunnelWiFiConfigDefaultProfile	read-only	current	If an instance of this object has the value true, this tunnel is a template for create other tunnels and has ip address 0.0.0.0