EMAP-MIB
1092 objects
EMAP MIB defines MIB objects which provides load and backup management, patch management NMS interfaces. The current version is v1.01
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.164 | IdentityhwSiteMonitorMIB | EMAP MIB defines MIB objects which provides load and backup management, patch management NMS interfaces. The current version is v1.01 | ||
| 1.3.6.1.4.1.2011.6.164.1 | NodehwSiteMonitorMIBObjects | |||
| 1.3.6.1.4.1.2011.6.164.1.1 | NodehwSiteInfo | |||
| 1.3.6.1.4.1.2011.6.164.1.1.1 | NodehwSiteSummary | |||
| 1.3.6.1.4.1.2011.6.164.1.1.1.1 | ScalarhwSiteId | read-only | current | Site ID, default value: 000,000.Naming rule of the site device ID (six digits): The first three digits indicate the device name and the last three digits indic… |
| 1.3.6.1.4.1.2011.6.164.1.1.1.2 | ScalarhwSiteName | read-write | current | Site name, which users can configure, is used to specify a site. Otherwise, the configured character can not be any other languages except English. |
| 1.3.6.1.4.1.2011.6.164.1.1.1.3 | ScalarhwSiteAdminAddr | read-write | current | Site administrant address, which users can assigned, is the unique ID of a site. It is used for device management by NMS, and value range is 0 to 65535. |
| 1.3.6.1.4.1.2011.6.164.1.1.1.4 | ScalarhwSiteDescription | read-write | current | Site description. It is of the character string type. It is used to describe the site information such as the site location, which users can configure. Otherwi… |
| 1.3.6.1.4.1.2011.6.164.1.1.1.5 | ScalarhwNetIdentifier | read-write | current | NE ID. It is of the character string type. It is the unique ID of the site (an independent network element (NE)) on the network. Otherwise, the configured char… |
| 1.3.6.1.4.1.2011.6.164.1.1.1.6 | ScalarhwSiteIp | read-only | current | Site IP address, default value is 192.168.0.10. Users need to configure the site IP address. |
| 1.3.6.1.4.1.2011.6.164.1.1.1.7 | ScalarhwSiteNetmask | read-only | current | Site netmask, default value is 255.255.255.0. Users need to configure the site netmask. |
| 1.3.6.1.4.1.2011.6.164.1.1.1.8 | ScalarhwSiteGateway | read-only | current | Site gateway, default value: 192.168.0.1. Users need to configure the site gateway. |
| 1.3.6.1.4.1.2011.6.164.1.1.1.9 | ScalarhwSiteDGWorkStatus | read-only | current | State of the diesel working state. It is an enumeration type: If the enumeration value is 1, it indicates that the diesel is in the idle state; If the enumerat… |
| 1.3.6.1.4.1.2011.6.164.1.1.1.10 | ScalarhwSiteRunningStatus | read-only | current | State of the site alarm state. It is an enumeration type: If the enumeration value is 1, it indicates that the site is in the normal state; If the enumeration … |
| 1.3.6.1.4.1.2011.6.164.1.1.1.12 | ScalarhwSiteSystemEsn | read-only | current | System ESN Report Neteco |
| 1.3.6.1.4.1.2011.6.164.1.1.1.13 | ScalarhwSiteTime | read-write | current | Set Site date and time, YYYY-MM-DD HH:MM:SS |
| 1.3.6.1.4.1.2011.6.164.1.1.1.14 | ScalarhwSiteNetecoPrimaryServerIP | read-only | current | Neteco Primary Server IP Address |
| 1.3.6.1.4.1.2011.6.164.1.1.1.15 | ScalarhwSiteNetecoBackupServerIP | read-only | current | Neteco Backup Server IP Address |
| 1.3.6.1.4.1.2011.6.164.1.1.1.16 | ScalarhwSiteNetecoPortNumber | read-only | current | Neteco Port Number |
| 1.3.6.1.4.1.2011.6.164.1.1.2 | NodehwSiteAlarms | |||
| 1.3.6.1.4.1.2011.6.164.1.1.2.1 | ScalarhwDeviceTrapOrdinalNumber | read-write | current | Site device event trap serial number (SN) is the unique ID of the device event trap. It is used to resend and synchronize event traps. Its value range is 0 to … |
| 1.3.6.1.4.1.2011.6.164.1.1.2.2 | ScalarhwAlarmTrapOrdinalNumber | read-write | current | Site alarm serial number (SN) is the unique ID of the alarm Trap. It is used to resend and synchronize alarms. Its value range is 0 to 4294967295. When the val… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.3 | ScalarhwAlarmQuantity | read-only | current | Alarm number in site alarm list which are support. It is used for alarm list management by NMS, and value range is 0 to 65535. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99 | TablehwSiteActiveAlarmTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1 | RowhwSiteActiveAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.1 | ColumnhwActiveAlarmIndex | read-only | current | Site active alarm table index. It is the unique ID of the site alarm. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.2 | ColumnhwActiveAlarmText | read-only | current | Active alarm name. It is of the character string type, and used to specify the content of a specific alarm. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.3 | ColumnhwActiveAlarmLevel | read-only | current | Active alarm level, which users can configure the alarm severity, is an enumeration type: If the enumeration value is 1, it indicates a critical alarm; If the … |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.4 | ColumnhwActiveAlarmSigDesc | read-only | current | Active alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm. Otherwise, the configured charact… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.5 | ColumnhwActiveAlarmTime | read-only | current | Active alarm time. It is of the character string type, and used to specify the content of a specific alarm. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.6 | ColumnhwSMUSiteName | read-only | current | Site name, which users can configure, is used to specify a site. Otherwise, the configured character can not be any other languages except English. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.7 | ColumnhwSMUSiteAdminAddr | read-only | current | Site administrant address, which users can assigned, is the unique ID of a site. It is used for device management by NMS, and value range is 0 to 65535. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.8 | ColumnhwSMUNetIdentifier | read-only | current | NE ID. It is of the character string type. It is the unique ID of the site (an independent network element (NE)) on the network. Otherwise, the configured char… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.9 | ColumnhwSMUSiteDescription | read-only | current | Site description. It is of the character string type. It is used to describe the site information such as the site location, which users can configure. Otherwi… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.10 | ColumnhwEquipId | read-only | current | Equipment ID. Value range: 000,000 to 000,100, in which the first three digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.11 | ColumnhwEquipName | read-only | current | Equipment name. It is of the character string type, and users can set the name of the monitor. Otherwise, the configured character can not be any other languag… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.99.1.100 | ColumnhwActiveAlarmRowStatus | read-create | current | Rowstatus of active alarm table. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100 | TablehwSiteAlarmTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1 | RowhwSiteAlarmEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1.1 | ColumnhwAlarmIndex | read-only | current | Site alarm table index. It is the unique ID of the site alarm. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1.2 | ColumnhwAlarmText | read-only | current | Alarm name. It is of the character string type, and used to specify the content of a specific alarm. |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1.3 | ColumnhwAlarmLevel | read-write | current | Alarm level, which users can configure the alarm severity, is an enumeration type: If the enumeration value is 1, it indicates a critical alarm; If the enumera… |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1.4 | ColumnhwAlarmSigDesc | read-only | current | Alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm. Otherwise, the configured character can … |
| 1.3.6.1.4.1.2011.6.164.1.1.2.100.1.100 | ColumnhwAlarmRowStatus | read-create | current | RowStatus of site alarms table. |
| 1.3.6.1.4.1.2011.6.164.1.1.3 | NodehwSiteStatus | |||
| 1.3.6.1.4.1.2011.6.164.1.1.3.1 | ScalarhwAcInputStatus | read-only | current | AC fail 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.2 | ScalarhwRectifierStatus | read-only | current | Rectifier fault 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.3 | ScalarhwBatteryDischarge | read-only | current | Battery discharge 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.4 | ScalarhwBatteryLowVoltage | read-only | current | Battery low voltage 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.5 | ScalarhwBatteryUltraLowVoltage | read-only | current | Battery ultra-low voltage 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.6 | ScalarhwBatteryDisconnect | read-only | current | Battery disconnect 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.7 | ScalarhwFuseBroken | read-only | current | Load fuse or battery fuse broken 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.8 | ScalarhwLowRecitiferCapacity | read-only | current | large load current and low rectifier capacity 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.9 | ScalarhwBatteryTestNegative | read-only | current | Battery test result negative 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.10 | ScalarhwUrgentAlarmStatus | read-only | current | Urgent Alarm 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.1.3.11 | ScalarhwNonurgentAlarmStatus | read-only | current | Non-Urgent Alarm 0: no alarm, 1:alarm |
| 1.3.6.1.4.1.2011.6.164.1.2 | NodehwSiteMonitors | |||
| 1.3.6.1.4.1.2011.6.164.1.2.1 | NodehwMonitorsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.2.1.1 | ScalarhwMonsGroupId | read-only | current | Site monitor group ID, is the unique ID of the site monitors. |
| 1.3.6.1.4.1.2011.6.164.1.2.1.2 | ScalarhwMonsGroupName | read-write | current | Site monitor group name is of the character string type, used to specify the monitor group. Users can configure it. Otherwise, the configured character can not… |
| 1.3.6.1.4.1.2011.6.164.1.2.1.3 | ScalarhwMonsQuantity | read-only | current | Total site intelligent monitors. Units:pcs. |
| 1.3.6.1.4.1.2011.6.164.1.2.2 | NodehwMonitor | |||
| 1.3.6.1.4.1.2011.6.164.1.2.2.1 | TablehwMonitorTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1 | RowhwMonitorEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.1 | ColumnhwMonIndex | read-only | current | Table index of the site monitors (hwSiteMonitorTable) is restricted by the quantity of the site monitors (hwMonsQuantity). Value range: 1 to 100. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.2 | ColumnhwMonEquipId | read-only | current | Site monitor ID. Value range: 001,001 to 001,100, in which the first three digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.3 | ColumnhwMonEquipName | read-write | current | Monitor name. It is of the character string type, and users can set the name of the monitor. Otherwise, the configured character can not be any other languages… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.4 | ColumnhwMonEquipDescription | read-write | current | Monitor description. It is of the character string type. Users can set the description of the monitor. Otherwise, the configured character can not be any other… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.5 | ColumnhwMonEquipSoftwareVersion | read-only | current | Monitor software version. It is of the character string type. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.6 | ColumnhwMonEquipPcbVersion | read-only | current | Monitor printed circuit board (PCB) hardware version. It is of the character string type. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.7 | ColumnhwMonEquipManufacturer | read-only | current | Monitor manufacture. It is of the character string type, and is an inherent attribute of the device. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.8 | ColumnhwMonEquipManuDate | read-only | current | Monitor production date. It is of the character string type, and is an inherent attribute of the device. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.9 | ColumnhwMonEquipSerialNo | read-only | current | Production SN of the monitor. It is the electronic tag of the products. |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.10 | ColumnhwMonEquipOperTotalTime | read-only | current | Total monitor runtime. The monitor counts the data in real time. Value range is 0 to 65535, The value is an integer (1), Units:hours. (h). It is used for perfo… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.11 | ColumnhwSetMonEquipCtrlState | read-write | current | Monitor control status. It is an enumeration type: If the enumeration value is 1, it indicates the background control; If the enumeration value is 2, it indica… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.12 | ColumnhwCtrlMonEquipReset | read-write | current | Warm-reset control of the monitor. It is an enumeration type: If the enumeration value is 1, it indicates the Warm-reset control of the monitor is normal; If t… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.99 | ColumnhwMonitorOperStatus | read-only | current | State of the site monitor module. It is an enumeration type: If the enumeration value is 1, it indicates that the site monitor module is in the normal state; I… |
| 1.3.6.1.4.1.2011.6.164.1.2.2.1.1.100 | ColumnhwMonRowStatus | read-create | current | RowStatus of site monitor. |
| 1.3.6.1.4.1.2011.6.164.1.3 | NodehwSiteRectifiers | |||
| 1.3.6.1.4.1.2011.6.164.1.3.1 | NodehwRectsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.3.1.1 | ScalarhwRectsGroupId | read-only | current | Device group ID of the rectifier module. It is the unique ID of the rectifier module group, and its default value: 002,000. The first digits indicate the devic… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.2 | ScalarhwRectsGroupName | read-write | current | Name of the rectifier module group, character string type, is used to specify the rectifier module group. Users can configure it. Otherwise, the configured cha… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.3 | ScalarhwRectsTotalCurrent | read-only | current | Total current of the rectifier module group on the site. It indicates the real-time statistics of the rectifier module group on the site. Default value: 0 to 2… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.4 | ScalarhwRectsTotalQuantity | read-only | current | Total quantity of the rectifier modules. Value range: 0 to 256. Units:pcs. |
| 1.3.6.1.4.1.2011.6.164.1.3.1.5 | ScalarhwRectsRatedVoltage | read-only | current | Rated voltage of the rectifier module group. It is an inherent attribute. Value range: 42 to 58.3, Units: V, and the value is accurate to one decimal place (.1… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.6 | ScalarhwModifyRectsOutputVoltage | read-write | current | Voltage adjustment of the rectifier module, which users can configure it. Value range: 41 to 59, Units: V, and the value is accurate to one decimal space (.1).… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.7 | ScalarhwSetRectsRedundEnable | read-write | current | Sleep function of the rectifier module group on the site. It is an enumeration value: If the NMS notifies the SNMP agent that this node is set to 1, it means t… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.8 | ScalarhwCtrlRectsAllOnOff | read-write | current | Power-on or power-off of the rectifier module group (all the rectifier modules) on the site. It is an enumeration value: If the NMS notifies the SNMP agent tha… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.9 | ScalarhwRectsTotalDCPower | read-only | current | Total power of the direct current output. Value range: 0 to 100000000, units: W, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indica… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.10 | ScalarhwRectsLoadUsage | read-only | current | Load Usage. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.3.1.11 | ScalarhwRectsTotalACInputPower | read-only | current | Total power of the direct current output. Value range: 0 to 100000000, units: W, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indica… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.12 | ScalarhwRectsHighRectifierCapacity | read-write | current | High rectifier capacity. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is i… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.13 | ScalarhwRectsLowRectifierCapacity | read-write | current | Low rectifier capacity. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is in… |
| 1.3.6.1.4.1.2011.6.164.1.3.1.14 | ScalarhwRectsOverVoltProtThres | read-write | current | Overvoltage protection threshold. Value range: 56.0 to 60.5, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFF… |
| 1.3.6.1.4.1.2011.6.164.1.3.2 | NodehwRectifier | |||
| 1.3.6.1.4.1.2011.6.164.1.3.2.1 | TablehwRectConfigTable | not-accessible | current | Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1 | RowhwRectConfigEntry | not-accessible | current | Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.1 | ColumnhwRectConfigIndex | read-only | current | Index of the device configuration list for the rectifier modules, which value range: 1 to 256(To the actual subject). Lines of the device list are restricted b… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.2 | ColumnhwRectEquipId | read-only | current | Rectifier module ID. Value range: 002'001 to 002'255. The first digits indicate the device type and last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.3 | ColumnhwRectEquipName | read-only | current | Device name of the rectifier module, character string type, is used to specify the rectifier module. Users can configure it. Otherwise, the configured characte… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.4 | ColumnhwRectType | read-only | current | Specific type of the rectifier module. It is an enumeration type: If the enumeration value is 1, it indicates a 5A rectifier module; If the enumeration value i… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.5 | ColumnhwRectSoftwareVersion | read-only | current | Software version of the rectifier module. It indicates the software version ID of the module. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.6 | ColumnhwRectManufacturer | read-only | current | Manufacture of the rectifier module. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.7 | ColumnhwRectManuDate | read-only | current | Manufacture date of rectifiers is of string type. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.8 | ColumnhwRectSerialNo | read-only | current | Rectifier module SN. It indicates the electronic tag of the product. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.9 | ColumnhwRectRatedCurrent | read-only | current | Rated voltage of the rectifier module, is an inherent attribute. Value range: 0 to 200, Units: A, and the value is accurate to one decimal place (.1). If the v… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.10 | ColumnhwRectEfficency | read-only | current | Efficiency of the rectifier module, is an inherent attribute. Value range: 0 to 100, Units: %, and the value is accurate to one decimal place (.1). If the valu… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.11 | ColumnhwRectInputAcType | read-only | current | Input AC type of the rectifier module. It is an enumeration value: If the value of the node is 1, it indicates single-phase AC input; If the value of the node … |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.12 | ColumnhwCtrlRectOnOff | read-write | current | Power-on or power-off of the rectifier module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on o… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.1.1.100 | ColumnhwRectConfigRowStatus | read-create | current | RowStatus of rectifier config table. |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2 | TablehwRectOperTable | not-accessible | current | Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status. This table's in… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1 | RowhwRectOperEntry | not-accessible | current | Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status. This table's in… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.1 | ColumnhwRectOperIndex | read-only | current | Table index of the running rectifier modules, which value range: 1 to 256(To the actual subject). Lines of the device list are restricted by the total quantity… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.2 | ColumnhwRectOutputCurrent | read-only | current | Output current of the rectifier module. It is a real-time analog parameter. Value range: 0 to 300, Units: A, and the value is accurate to one decimal place (.1… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.3 | ColumnhwRectOutputVoltage | read-only | current | Output voltage of the rectifier module. It is a real-time analog parameter. Value range: 0 to 65, Units: V, the value is accurate to one decimal place (.1). If… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.4 | ColumnhwRectTotalOperTime | read-only | current | Total runtime of the rectifier module. Value units: minute (m), and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.5 | ColumnhwRectDCOutputPower | read-only | current | DC output power. Value range: 0 to 30000, units: W, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inv… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.6 | ColumnhwRectACVoltage | read-only | current | AC input voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates th… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.7 | ColumnhwRectRatedEfficiency | read-only | current | Rated Efficiency. Value range: 0 to 100, units: %, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inva… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.8 | ColumnhwRectifierTemperature | read-only | current | Rectifier Temperature. Value range: -300 to 300, units: degC, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it i… |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.99 | ColumnhwRectOperStatus | read-only | current | State of the rectifier module. It is an enumeration type: If the enumeration value is 1, the rectifier module is in the normal state; If the enumeration value … |
| 1.3.6.1.4.1.2011.6.164.1.3.2.2.1.100 | ColumnhwRectOperRowStatus | read-create | current | RowStatus of rectifier runing table. |
| 1.3.6.1.4.1.2011.6.164.1.4 | NodehwSiteBatterys | |||
| 1.3.6.1.4.1.2011.6.164.1.4.1 | NodehwBattsConfig | |||
| 1.3.6.1.4.1.2011.6.164.1.4.1.1 | ScalarhwBattsGroupId | read-only | current | Battery group ID. It is the unique ID of the battery group device. The first digits indicate the device type and the last three digits indicate the device SN. … |
| 1.3.6.1.4.1.2011.6.164.1.4.1.2 | ScalarhwBattsGroupName | read-write | current | Device name of the battery group. It is of the character string type, which can be configured by users. Otherwise, the configured character can not be any othe… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.3 | ScalarhwBattsTotalQuantity | read-only | current | Total quantity of battery strings, which value range: 0 to 100. Units:strings. |
| 1.3.6.1.4.1.2011.6.164.1.4.1.4 | ScalarhwSetBattsHighTempAction | read-write | current | Battery high-temperature protection mode. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates the power-off protecti… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.5 | ScalarhwSetBattsHighTempVoltLimit | read-write | current | Battery protection voltage under high temperature. It works with the low-voltage power-off protection in battery high-temperature protection mode, which can be… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.6 | ScalarhwSetBattsHTDLimit | read-write | current | Upper threshold of the battery high temperature disconnection(HTD), can be configured by users. Value range: 25 to 80, Units: centigrade (degC), and the value … |
| 1.3.6.1.4.1.2011.6.164.1.4.1.7 | ScalarhwSetBattsHTDEnable | read-write | current | Battery high temperature disconnection enable. It is an enumeration type: If the enumeration value is 1, enable the operation of the battery disconnection in h… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.8 | ScalarhwSetBattsFloatVoltage | read-write | current | Float charge voltage of the batteries, can be configured by users. Value range: 42 to 58.3, units: V, and the value is accurate to one decimal place (.1) If th… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.9 | ScalarhwSetBattsBoostVoltage | read-write | current | Boostcharge voltage of the batteries, can be configured by users. Value range: 42 to 58.3, units: V, and the value is accurate to one decimal place (.1). If th… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.10 | ScalarhwSetBattsCurrLimitCoefficient | read-write | current | Current-limiting point coefficient of the batteries, can be configured by users. Value range: 0.05 to 0.5, units: C10, and the value is accurate to two decimal… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.11 | ScalarhwSetBattsCompFactor | read-write | current | Temperature compensated coefficient of the batteries, can be configured by user. Value range: 0 to 500, units: mv per centigrade, and the value is an integer (… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.12 | ScalarhwCtrlBattsBoostFloat | read-write | current | Control batteries charge mode between boost and float. It is an enumeration value. Users actively control the conversion. If the NMS notifies the SNMP agent th… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.13 | ScalarhwSetBattsRatedCapacity | read-write | current | Set batteries rated capacity. It is an analog parameter collected by the battery string in real time. Value range: 5 to 10000, units: Ah, the value is an integ… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.14 | ScalarhwSetBattsTimedBoostChargeEnabled | read-write | current | Timed Boost Charge Enabled. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates timed boost charge is disabled; If t… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.15 | ScalarhwSetBattsTimedBoostChargePeriod | read-write | current | Timed Boost Charge Interval. Value range: 1 to 365, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the … |
| 1.3.6.1.4.1.2011.6.164.1.4.1.16 | ScalarhwSetBattsMaxTimedBCDuration | read-write | current | Maximum Timed Boost Charge Duration. Value range: 1 to 24, units: h, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.17 | ScalarhwSetBattsChargeOvercurAlmThreshold | read-write | current | Charge Overcurrent Alarm Threshold. Value range: 0.05 to 1, units: C10, and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFF… |
| 1.3.6.1.4.1.2011.6.164.1.4.1.18 | ScalarhwSetBattsLowCapacityAlarmThreshold | read-write | current | Low Capacity Alarm Threshold. Value range: 0 to 90, units: %, and the value is an integer. (1) If the value is 2147483647(0x7FFFFFFF), it indicates that the va… |
| 1.3.6.1.4.1.2011.6.164.1.4.2 | NodehwBattsOperate | |||
| 1.3.6.1.4.1.2011.6.164.1.4.2.1 | ScalarhwBattsTotalCurrent | read-only | current | Total current of the battery group. It indicates the real-time statistics of the battery group on the site. Value range: -400000 to +400000, units: A, and the … |
| 1.3.6.1.4.1.2011.6.164.1.4.2.2 | ScalarhwBattsPreDischargeTime | read-only | current | Battery group backup time. It indicates the real-time statistics of the battery group. Value range: 0 to 15360, Units: minutes (min), and the value is an integ… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.3 | ScalarhwBattsChargeStatus | read-only | current | Battery charging state, indicates the charging and discharging information about the battery group. It is an enumeration type. If the enumeration value is 1, i… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.4 | ScalarhwBattsCurrLimitStatus | read-only | current | Battery group current-limiting state, indicates the state information about the battery group. It is an enumeration value. If the enumeration value is 1, it in… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.5 | ScalarhwBattsTemprature1 | read-only | current | Battery temperature. It is a battery parameter collected in real time. Value range: -300 to 200, unit: centigrade (degC), and the value is an integer . If the … |
| 1.3.6.1.4.1.2011.6.164.1.4.2.6 | ScalarhwBattsTemprature2 | read-only | current | Battery temperature. It is a battery parameter collected in real time. Value range: -50 to +100, unit: centigrade (degC), and the value is an integer (1). If t… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.7 | ScalarhwBattsAlarmsClear | read-write | current | Battery alarms clear. It is an enumeration type: If the enumeration value is 1, it indicates the clear batt test fail alarm ; If the enumeration value is 2, it… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.8 | ScalarhwBattsRatedCapacity | read-only | current | Batteries actual capacity. It is an analog parameter collected by the battery string in real time. Value range: 0 to 2147483647, units: Ah, the value is an int… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.9 | ScalarhwBattsRemainCapacity | read-only | current | Remaining capacity of all of the battery. It is an analog parameter collected by the battery string in real time. Value range: 0 to 2147483647, units: Ah, and … |
| 1.3.6.1.4.1.2011.6.164.1.4.2.10 | ScalarhwTotalRemainingCapacityPercent | read-only | current | Total Remaining Capacity Percent. Value range: 0 to 100, units: %, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that t… |
| 1.3.6.1.4.1.2011.6.164.1.4.2.11 | ScalarhwBattsTotalDischargeDepth | read-only | current | Battery Total Discharge Depth Percent. Value range: 0 to 100, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that … |
| 1.3.6.1.4.1.2011.6.164.1.4.3 | NodehwBattsTest | |||
| 1.3.6.1.4.1.2011.6.164.1.4.3.1 | ScalarhwBattsTestRecordCount | read-only | current | Battery test records number. |
| 1.3.6.1.4.1.2011.6.164.1.4.3.2 | ScalarhwSetBattsManuStdTestTime | read-write | current | Battery standard test time, It can be configured by users, value range defines between 1 to 6000, units: minutes(min). and its value is an integer (1). Here, i… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.3 | ScalarhwSetBattsManuStdTestEndVolt | read-write | current | Test end voltage of single battery, which can be configured by users. value range defines between 1.7 to 2.2 Units: V/cell, and the value is accurate to two de… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.4 | ScalarhwSetBattsManuStdTestCellNum | read-write | current | Battery cell number in each Group, which is used in the battery standard manual test, can be configured by users. Units: psc or cell, value range defines betwe… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.5 | ScalarhwSetBattsManuShortTestTime | read-write | current | Battery short test time, It can be configured by users, value range defines between 1 to 240, units: minutes(min). and its value is an integer (1). If battery … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.6 | ScalarhwSetBattsManuShortTestEndVolt | read-write | current | Voltage when the battery short test is ended, can be configured by users. Here, if battery manual test is standard mode, value range defines between 44.2 to 53… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.7 | ScalarhwCtrlBattsTestStartStop | read-write | current | Battery manualtest start and stop. It is an enumeration value. If the value is 1, it means to start a standard manual test; If the value is 2, it means to star… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.8 | ScalarhwSetBattsConsCurrTestEnable | read-write | current | Battery constant current test function enable or disable. It is an enumeration value. If the value is 1, it means the function is disabled; If the value is 2, … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.9 | ScalarhwSetBattsConsCurrTestDischCurrent | read-write | current | The battery discharge current in the constant current test. It is an integer value(range:1A~9999A) and the value is accurate to 1A. |
| 1.3.6.1.4.1.2011.6.164.1.4.3.10 | ScalarhwSetBattsTimeTestMode | read-write | current | Battery constant current test function enable or disable. It is an enumeration value. If the value is 1, it means to disable the timed test of battery; If the … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.11 | ScalarhwSetBattsScheduledTestPeriod | read-write | current | Scheduled Test Period. Value range: 2 to 999, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.12 | ScalarhwSetBattsTestEndCapacity | read-write | current | Test End Capacity. Value range: 0 to 99, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.4.3.13 | ScalarhwSetBattsTestEndTemperature | read-write | current | Test End Temperature. Value range: -5 to 15, units: degC, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.14 | ScalarhwSetBattsShortTestEnable | read-write | current | Battery short test enable. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates battery short test is disabled; If th… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.15 | ScalarhwSetBattsShortTestPeriod | read-write | current | Short Test Period. Value range: 1 to 360, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is i… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100 | TablehwBattsTestResultTable | not-accessible | current | Battery test result record table. Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1 | RowhwBattsTestResultEntry | not-accessible | current | Battery test result record table. Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, … |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.1 | ColumnhwBattsTestResultIndex | read-only | current | Table index of the battery test results. Currently up to 10 times of the battery test results are saved by default. |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.2 | ColumnhwBattsTestType | read-only | current | Record test type of the battery test. It is an enumeration value: If the NMS notifies the SNMP agent that this node is set to 1, it indicates a manual test; If… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.3 | ColumnhwBattsTestStartTime | read-only | current | Test start time of the record in the battery test. It is of the character string type. |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.4 | ColumnhwBattsTestResult | read-only | current | Battery test result. It is an enumeration value. If the enumeration value of the node is 1, it indicates that the battery test has no result: If the enumeratio… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.5 | ColumnhwBattsEfficiency | read-only | current | Battery efficiency test. Value range: 0 to 100, Units: %, and the value is an integer (1). If the value is -1, it indicates that the test value is inefficient.… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.6 | ColumnhwBattsDischargeTime | read-only | current | Discharge time of the battery test records. Value range: 0 to 100, units: hour (h), and the value is accurate to two decimal places (.01). If the value is 2147… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.7 | ColumnhwBattsDischargeEndVoltage | read-only | current | Discharge termination voltage of the battery test. Value range: 0 to 60, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.8 | ColumnhwBattsDischargeAvCurrent | read-only | current | Average discharge current of the battery test. Value range: -1000 to 1000, units: A, and the value is accurate to one decimal place (.1). If the value is 21474… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.9 | ColumnhwBattsDischargeAhValue | read-only | current | Discharge ampere per hour the battery test. Value range: 0 to 5000, Units: Ah, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indi… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.10 | ColumnhwBattsTestTemperature | read-only | current | Battery temperature of the battery test termination. Value range: -50 to +100, Units: centigrade (degC), and the value is an integer (1). If the value is -1024… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.11 | ColumnhwBattsTestEndCourse | read-only | current | Termination factors of the battery test. It is an enumeration value. If the enumeration value is 1, it indicates that the voltage value of the battery test rea… |
| 1.3.6.1.4.1.2011.6.164.1.4.3.100.1.100 | ColumnhwBattsTestResultRowStatus | read-create | current | RowStatus of battery test table. |
| 1.3.6.1.4.1.2011.6.164.1.4.4 | NodehwBattString | |||
| 1.3.6.1.4.1.2011.6.164.1.4.4.1 | TablehwBattStringConfigTable | not-accessible | current | Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1 | RowhwBattStringConfigEntry | not-accessible | current | Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.1 | ColumnhwBattStringConfigIndex | read-only | current | Device table index of the battery string, value range: 1 to 100(To the actual subject). |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.2 | ColumnhwBattStringEquipId | read-only | current | Batteries device ID, can be configured by users. Value range: 003,001 to 003,100, in which the first three digits specify the device type and the last three sp… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.3 | ColumnhwBattStringEquipName | read-only | current | Batteries device name, of the character string type, is used to specify the batteries. Users can configure it. Otherwise, the configured character can not be a… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.4 | ColumnhwSetBattsTempUpperLimit | read-write | current | Upper threshold of the battery temperature alarm, can be configured by users. Value range: 25 to 80, Units: centigrade (degC), and the value is an integer (1).… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.5 | ColumnhwSetBattsTempLowerLimit | read-write | current | Lower threshold of the battery temperature alarm, can be configured by users. Value range: -20 to 20, Units: centigrade (degC), and the value is an integer (1)… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.6 | ColumnhwSetBattsTempMeasureUpperLimit | read-write | current | Upper threshold of the battery temperature measurement, can be configured by users. Value range: 0 to 100, Units: centigrade (degC), and the value is an intege… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.7 | ColumnhwSetBattsTempMeasureLowerLimit | read-write | current | Lower threshold of the battery temperature measurement, can be configured by users. Value range: -50 to 0, Units: centigrade (degC), and the value is an intege… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.8 | ColumnhwSetBattStdCapacity | read-write | current | Set battery standard capacity, is an inherent attribute of the device. Value range: 5 to 10000, units: Ah, the value is an integer (1). If the value is 2147483… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.9 | ColumnhwSetBattInstallTime | read-write | current | Set battery install time, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except E… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.1.1.100 | ColumnhwBattStringConfigRowStatus | read-create | current | RowStatus of battery string config table. |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2 | TablehwBattStringOperTable | not-accessible | current | Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as wel… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1 | RowhwBattStringOperEntry | not-accessible | current | Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as wel… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.1 | ColumnhwBattStringOperIndex | read-only | current | Device table index of the battery string, which value range: 1 to 100(To the actual subject). |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.2 | ColumnhwBattStringCurrent | read-only | current | Batteries current. It is an analog parameter collected by the battery string in real time. Value range: -1000 to +1000, units: A, and the value is accurate to … |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.3 | ColumnhwBattStringRemainCapacityPercent | read-only | current | Remaining capacity percentage of the battery string. Value range: 0 to 100, units: %, and the value is accurate to one decimal place (.1). If the value is 2147… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.4 | ColumnhwBattStringRemainCapacity | read-only | current | Remaining capacity of the battery string. It is an analog parameter collected by the battery string in real time. Value range: 0 to 1000, units: Ah, and the va… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.5 | ColumnhwBattStringActualCapacity | read-only | current | Batteries actual capacity. It is an analog parameter collected by the battery string in real time. Value range: 0 to 5000, units: Ah, the value is an integer (… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.6 | ColumnhwBattStringTemprature | read-only | current | Battery temperature. It is a battery parameter collected in real time. Value range: -300 to +200, unit: centigrade (degC), and the value is accurate to one dec… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.7 | ColumnhwBattStringMidpointVoltage | read-only | current | Batteries midpoint voltage. It is an analog parameter collected by the battery string in real time. Value range: -90 to +90, unit: V, and the value is accurate… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.99 | ColumnhwBattStringOperStatus | read-only | current | State of the site battery string module. It is an enumeration type: If the enumeration value is 1, it indicates that the site battery string is in the normal s… |
| 1.3.6.1.4.1.2011.6.164.1.4.4.2.1.100 | ColumnhwBattStringOperRowStatus | read-create | current | RowStatus of battery string runing table. |
| 1.3.6.1.4.1.2011.6.164.1.5 | NodehwSiteAcDistributions | |||
| 1.3.6.1.4.1.2011.6.164.1.5.1 | NodehwAcDistributionsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.5.1.1 | ScalarhwAcsGroupId | read-only | current | AC group ID, is the unique ID of the AC group. The first three digits indicate the device type and the last three indicate the device SN. If the last three dig… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.2 | ScalarhwAcsGroupName | read-write | current | Device name of the AC group. It is of the character string type, and can be configured by users. Otherwise, the configured character can not be any other langu… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.3 | ScalarhwAcsTotalCurrent | read-only | current | Total current of the AC group. It indicates the real-time statistics of the AC group. Value range: 0 to 1000, units: A, and the value is accurate to one decima… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.4 | ScalarhwAcsInputQuantity | read-only | current | Total quantity of the site ACUs. Value range: 0 to 100. |
| 1.3.6.1.4.1.2011.6.164.1.5.1.5 | ScalarhwSetAcsUpperVoltLimit | read-write | current | Upper threshold of the AC voltage alarm, can be configured by users. Value range: 50 to 600, units: V, and the value is an integer (1). If the value is 2147483… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.6 | ScalarhwSetAcsLowerVoltLimit | read-write | current | Lower threshold of the AC voltage alarm, can be configured by users. Value range: 50 to 600, units: V, and the value is an integer (1). If the value is 2147483… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.7 | ScalarhwAcsPowerConsumption | read-only | current | Low 32bits of AC Active power Consumption. Value range:0 to 4294967295, resolution 10wh. If GET value is 10, it means the real consumption is 10*10wh = 100wh (… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.8 | ScalarhwAcsPowerConsumptionHigh32b | read-only | current | High 32bits of AC Active Power Consumption. Value range:0 to 4294967295, resolution 10wh. |
| 1.3.6.1.4.1.2011.6.164.1.5.1.9 | ScalarhwAcsReactivePowerConsumption | read-only | current | Low 32bits of AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 10varh. If GET value is 10, it means the real consumption is 10*10varh = 1… |
| 1.3.6.1.4.1.2011.6.164.1.5.1.10 | ScalarhwAcsReactivePowerConsumptionHigh32b | read-only | current | High 32bits of AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 10varh. |
| 1.3.6.1.4.1.2011.6.164.1.5.1.11 | ScalarhwAcsActivePowerConsumptionKw | read-only | current | AC Active Power Consumption. Value range:0 to 4294967295, resolution 1kwh. |
| 1.3.6.1.4.1.2011.6.164.1.5.1.12 | ScalarhwAcsReactivePowerConsumptionKvar | read-only | current | AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 1kwh. |
| 1.3.6.1.4.1.2011.6.164.1.5.2 | NodehwAcDistribution | |||
| 1.3.6.1.4.1.2011.6.164.1.5.2.1 | TablehwAcInputTable | not-accessible | current | AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1 | RowhwAcInputEntry | not-accessible | current | AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.1 | ColumnhwAcInputIndex | read-only | current | ACU device table index, which value range: 1 to 100. Lines of the device list are restricted by the total quantity of ACUs (hwAcsInputQuantity). |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.2 | ColumnhwAcEquipId | read-only | current | ACU device ID, which users can configure. Value range: 004,001 to 004,100, in which The first digits indicate the device type and the last three digits indicat… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.3 | ColumnhwAcEquipName | read-write | current | ACU device name, of the character string type, is used to specify the alternating current unit (ACU). Users can configure it. Otherwise, the configured charact… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.4 | ColumnhwApOrAblVoltage | read-only | current | ACU A-phase or AB-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.5 | ColumnhwBpOrBclVoltage | read-only | current | ACU B-phase or BC-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.6 | ColumnhwCpOrCalVoltage | read-only | current | ACU C-phase or CA-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.7 | ColumnhwAphaseCurrent | read-only | current | ACU A-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal p… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.8 | ColumnhwBphaseCurrent | read-only | current | ACU B-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal p… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.9 | ColumnhwCphaseCurrent | read-only | current | ACU C-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal p… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.10 | ColumnhwAcInputBreakersQuantity | read-only | current | Quantity of the AC air circuit breakers. As the ACU lower-level subset, the node indicates the quantity of the output air circuit breakers contained by each AC… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.99 | ColumnhwAcInputOperStatus | read-only | current | State of the site AC distribution uint. It is an enumeration type: If the enumeration value is 1, it indicates that the site AC distribution uint is in the nor… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.1.1.100 | ColumnhwAcRowStatus | read-create | current | RowStatus of ACU. |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2 | TablehwAcInputBreakerTable | not-accessible | current | Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1 | RowhwAcInputBreakerEntry | not-accessible | current | Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1.1 | ColumnhwAcInputBreakerIndex | read-only | current | Device table index of the AC air circuit breaker. Value range: 1 to 100. An input air circuit breaker device can be uniquely identified through the ACU table i… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1.2 | ColumnhwAcInputBreakerEquipId | read-only | current | AC input air circuit breaker ID. Value range: 005,001 to 005,100. The first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1.3 | ColumnhwAcInputBreakerEquipName | read-write | current | AC input air circuit breaker name, of the character string type, can configured by users. Otherwise, the configured character can not be any other languages ex… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1.99 | ColumnhwAcInputBreakerOperStatus | read-only | current | Operation state of the site AC input breaker. It is an enumeration type: If the enumeration value is 1, it indicates that the site AC input breaker is in the n… |
| 1.3.6.1.4.1.2011.6.164.1.5.2.2.1.100 | ColumnhwAcInputBreakerRowStatus | read-create | current | RowStatus of AC input breaker. |
| 1.3.6.1.4.1.2011.6.164.1.6 | NodehwSiteDcDistributions | |||
| 1.3.6.1.4.1.2011.6.164.1.6.1 | NodehwDcDistributionsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.6.1.1 | ScalarhwDcsGroupId | read-only | current | DC group ID: unique ID of the DC group. in which The first digits indicate the device type and the last three digits indicate the device SN. If the last three … |
| 1.3.6.1.4.1.2011.6.164.1.6.1.2 | ScalarhwDcsGroupName | read-write | current | Device name of the DC group, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages excep… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.3 | ScalarhwDcsTotalVoltage | read-only | current | Total voltage of the DC group. Value range: 0 to 100, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.4 | ScalarhwDcsTotalCurrent | read-only | current | Total current of the DC group. Value range: -30000 to 30000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFF… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.5 | ScalarhwDcsTotalPower | read-only | current | Total power of the DC group. Value range: 0 to 3000000, units: W, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that th… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.6 | ScalarhwDcsTotalQuantity | read-only | current | Total quantity of the DC units, and its Value range: 0 to 100. |
| 1.3.6.1.4.1.2011.6.164.1.6.1.7 | ScalarhwSetDcsUpperVoltLimit | read-write | current | Upper threshold of the DC voltage alarm, can be configued by users. Value range: 53 to 60, units: V, and the value is accurate to one decimal space (.1). If th… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.8 | ScalarhwSetDcsLowerVoltLimit | read-write | current | Lower threshold of the DC voltage alarm, can be configued by users. Value range: 35 to 57, units: V, and the value is accurate to one decimal space (.1). If th… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.9 | ScalarhwDcsPerfoLoadConsume | read-only | current | PerfoLoad Consume of the DC, Value range: 0 to 429467295, units: KWh, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates tha… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.12 | ScalarhwDcsLoadConsumptionLow32b | read-only | current | Low 32bits of total DC Load Consumption,Value range: 0 to 429467295, resolution 10wh. If GET value is 10, it means the real consumption is 10*10wh = 100wh (0.1… |
| 1.3.6.1.4.1.2011.6.164.1.6.1.13 | ScalarhwDcsLoadConsumptionHigh32b | read-only | current | High 32bits of total DC Load Consumption,Value range: 0 to 429467295, resolution 10wh. |
| 1.3.6.1.4.1.2011.6.164.1.6.2 | NodehwDcDistribution | |||
| 1.3.6.1.4.1.2011.6.164.1.6.2.1 | TablehwDcOutputTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1 | RowhwDcOutputEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.1 | ColumnhwDcOutputIndex | read-only | current | Device table index of the DC units, which value range: 1 to 100. Lines of the device list are restricted by the total quantity of DC units (hwDcsQuantity). |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.2 | ColumnhwDcOutputEquipId | read-only | current | DC unit device ID, which value range: 006,001 to 006,100. The first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.3 | ColumnhwDcOutputEquipName | read-write | current | DC unit device name, of the character string type, can be configued by users. Otherwise, the configured character can not be any other languages except English. |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.4 | ColumnhwDcOutputVoltage | read-only | current | DC output voltage. It is an analog parameter collected by the DC power in real time. Value range: 0 to 100, units: V, and the value is accurate to one decimal … |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.5 | ColumnhwDcOutputCurrent | read-only | current | DC output current. It is an analog parameter collected by the DC power in real time. Value range: -30000 to 30000, units: A, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.6 | ColumnhwDcOutputPower | read-only | current | DC output power. It is an analog parameter collected by the DC power in real time. Value range: 0 to 3000000, units: W, and the value is an integer (1). If the… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.7 | ColumnhwLoadsQuantity | read-only | current | Quantity of the DC load output branches, which value range: 0 to 100. As the DC unit lower-level subset, the node indicates the quantity of the DC load output … |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.8 | ColumnhwLoadUsage | read-only | current | The load usage of rated rectifier capacity. Value range: 0 to 100, units: %, and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.99 | ColumnhwDcOutputOperStatus | read-only | current | State of the site DC distribution uint. It is an enumeration type: If the enumeration value is 1, it indicates that the site DC distribution uint is in the nor… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.1.1.100 | ColumnhwDcOutputRowStatus | read-create | current | RowStatus of Dc output equipments. |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2 | TablehwLoadBranchTable | not-accessible | current | Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index … |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1 | RowhwLoadBranchEntry | not-accessible | current | Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index … |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.1 | ColumnhwLoadBranchIndex | read-only | current | Device table index of the DC load output branch, which value range: 1 to 100. A DC load output branch can be uniquely identified through the DC unit table inde… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.2 | ColumnhwLoadBranchEquipId | read-only | current | Device ID of the DC load output branch. Value range: 007,001 to 007,100. The first digits indicate the device type and the last three digits indicate the SN of… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.3 | ColumnhwLoadBranchEquipName | read-write | current | Device name of the DC load output branch, of the character string type, can be configured by users. Otherwise, the configured character can not be any other la… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.4 | ColumnhwLoadBranchCurrent | read-only | current | DC load output branch current. It is an analog parameter collected by the load branch in real time. Value range: 0 to 10000, units: A, and the value is accurat… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.5 | ColumnhwLoadBranchPower | read-only | current | DC load branch power. It is an analog parameter collected by the DC power in real time. Value range: 0 to 600000, units: W, and the value is an integer (1). If… |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.6 | ColumnhwLoadBranchConsume | read-only | current | DC load branch power consumption, Value range: 0 to 4294967295, units: KWh, and the value is accurate to one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.8 | ColumnhwLoadBranchConsumption | read-only | current | DC load branch power consumption,Value range: 0 to 4294967295, resolution:1 KWh. |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.9 | ColumnhwLoadBranchConsumptionLow32b | read-only | current | Low 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.10 | ColumnhwLoadBranchConsumptionHigh32b | read-only | current | High 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.99 | ColumnhwLoadBranchOperStatus | read-only | current | State of the site load output branch. It is an enumeration type: If the enumeration value is 1, it indicates that the site load output branch is in the normal … |
| 1.3.6.1.4.1.2011.6.164.1.6.2.2.1.100 | ColumnhwLoadBranchRowStatus | read-create | current | RowStatus of loads output branch. |
| 1.3.6.1.4.1.2011.6.164.1.7 | NodehwLvdUnits | |||
| 1.3.6.1.4.1.2011.6.164.1.7.1 | NodehwLvdsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.7.1.1 | ScalarhwLvdsGroupId | read-only | current | LVD unit group ID. It is the unique ID of the LVD unit group. The first digits indicate the device type. The last three digits indicate the device SN. If the l… |
| 1.3.6.1.4.1.2011.6.164.1.7.1.2 | ScalarhwLvdsGroupName | read-write | current | Low-voltage power-off unit group name, of the character string type, can be configured by users. Otherwise, the configured character can not be any other langu… |
| 1.3.6.1.4.1.2011.6.164.1.7.1.3 | ScalarhwLvdsTotalQuantity | read-only | current | Total quantity of power-off units. Value range: 0 to 100. |
| 1.3.6.1.4.1.2011.6.164.1.7.2 | NodehwLvdUnit | |||
| 1.3.6.1.4.1.2011.6.164.1.7.2.1 | TablehwLvdBranchTable | not-accessible | current | Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as con… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1 | RowhwLvdBranchEntry | not-accessible | current | Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as con… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.1 | ColumnhwLvdBranchIndex | read-only | current | Device table index of a power-off unit. Value range: 1 to 100. Lines of the device list are restricted by the total quantity of the power-off units (hwLvdsTota… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.2 | ColumnhwLvdUnitEquipId | read-only | current | Device ID of a power-off unit. Value range: 8001 to 8100. The first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.3 | ColumnhwLvdUnitEquipName | read-only | current | Device name of a power-off unit, of the character string type, is used to specify the low-voltage power-off unit. Users can configure it. Otherwise, the config… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.4 | ColumnhwSetLvdEnable | read-write | current | Control power-off unit enabling. It is an enumeration value, and users actively set it. If the enumeration value is 1, it means to enable the power-off unit; I… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.5 | ColumnhwSetLvdVoltage | read-write | current | Low-voltage power-off voltage of a power-off unit can be configured by users. Its value range: 35 to 56, units: V, and the value is accurate to one decimal spa… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.6 | ColumnhwCtrlLvd | read-write | current | Control of the power-off unit. It is an enumeration value, users control it manually. If the NMS notifies the SNMP agent that the node is set to 1, it means to… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.7 | ColumnhwSetLvdMode | read-write | current | Select the control mode of the power-off unit. It is an enumeration value, users can configure it manually. If the NMS notifies the SNMP agent that the node is… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.8 | ColumnhwSetLvdReconnectedVoltage | read-write | current | Low-voltage power-off recover of a power-off unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal … |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.9 | ColumnhwSetLvdDisconnectedTime | read-write | current | Low-voltage power-off disconnected time, It can be configured by users, value range defines between 5 to 1000, unit: minutes(min) �� and its value is an in… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.10 | ColumnhwSetLvdDisconnectedCapacity | read-write | current | Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 100, unit: %, and the val… |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.99 | ColumnhwLvdBranchOperStatus | read-only | current | State of the site LVD uint. It is an enumeration type: If the enumeration value is 1, the site LVD uint is in the normal state; If the enumeration value is 2, … |
| 1.3.6.1.4.1.2011.6.164.1.7.2.1.1.100 | ColumnhwLvdBranchRowStatus | read-create | current | RowStatus of lvd table. |
| 1.3.6.1.4.1.2011.6.164.1.8 | NodehwSiteEnvUnits | |||
| 1.3.6.1.4.1.2011.6.164.1.8.1 | NodehwEnvUnitsGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.8.1.1 | ScalarhwEnvUnitsGroupId | read-only | current | Unit group ID of the site environment. It is the unique ID of the unit group on the site. The first digits indicate the device type. The last three digits indi… |
| 1.3.6.1.4.1.2011.6.164.1.8.1.2 | ScalarhwEnvUnitsGroupName | read-write | current | Unit group name of the site environment, of the character string type, can be configured by users. Otherwise, the configured character can not be any other lan… |
| 1.3.6.1.4.1.2011.6.164.1.8.1.3 | ScalarhwCtrlSmokeReset | read-write | current | Smoke sensor reset. It manually controls clearance of the smoke sensor alarm, and this node is of the enumeration type. If the enumeration value of the node is… |
| 1.3.6.1.4.1.2011.6.164.1.8.1.4 | ScalarhwCtrlDoorReset | read-write | current | Door actuator reset control. It manually controls clearance of the door actuator alarm. This node is of the enumeration type. If the enumeration value is 1, it… |
| 1.3.6.1.4.1.2011.6.164.1.8.1.5 | ScalarhwCtrlBuzzerEnable | read-write | current | Buzzer enabling. It manually controls the enabling of the buzzer alarm. This node is of the enumeration type. When the enumeration value is 1, it means to enab… |
| 1.3.6.1.4.1.2011.6.164.1.8.1.6 | ScalarhwEnvTempSensorsTotalQuantity | read-only | current | Quantity of the environment temperature sensors, and its value range: 0 to 256. |
| 1.3.6.1.4.1.2011.6.164.1.8.1.7 | ScalarhwEnvHumiSensorsTotalQuantity | read-only | current | Quantity of the environment humidity sensors, and its value range: 0 to 256. |
| 1.3.6.1.4.1.2011.6.164.1.8.1.8 | ScalarhwSpareDigitalsTotalQuantity | read-only | current | Quantity of the Spare digitals, and its value range: 0 to 256. |
| 1.3.6.1.4.1.2011.6.164.1.8.1.9 | ScalarhwSpareDigitalsOutputQuantity | read-only | current | Quantity of the Spare digitals Output, and its value range: 0 to 256. |
| 1.3.6.1.4.1.2011.6.164.1.8.2 | NodehwEnvSensor | |||
| 1.3.6.1.4.1.2011.6.164.1.8.2.1 | TablehwEnvTempSensorTable | not-accessible | current | Site environment temperature table. Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment tempera… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1 | RowhwEnvTempSensorEntry | not-accessible | current | Site environment temperature table. Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment tempera… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.1 | ColumnhwEnvTempSensorIndex | read-only | current | Table index of the environment temperature sensors. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.2 | ColumnhwEnvTempEquipId | read-only | current | Environment temperature sensor ID. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.3 | ColumnhwEnvTempEquipName | read-write | current | Environment temperature sensor name, of the character string type, is used to specify an environment temperature sensor. Users can configure it. Otherwise, the… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.4 | ColumnhwEnvTemperature | read-only | current | Environment temperature. It is an environment parameter collected in real time. Value range: -50 to +100, units: centigrade (degC), and the value is an integer… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.5 | ColumnhwSetEnvTempUpperLimit | read-write | current | Upper threshold of the environment temperature alarm, can be configured by users. units: centigrade (degC), and the value is an integer (1). If the value is 21… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.6 | ColumnhwSetEnvTempLowerLimit | read-write | current | Lower threshold of the environment temperature alarm, can be configured by users. units: centigrade (degC), and the value is an integer (1). If the value is 21… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.7 | ColumnhwSetEnvTempMeasureUpperLimit | read-write | current | Upper threshold of the environment temperature measurement, can be configured by users. Value range: 0 to 100, unit: centigrade (degC), and the value is an int… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.8 | ColumnhwSetEnvTempMeasureLowerLimit | read-write | current | Lower threshold of the environment temperature measurement, can be configured by users. Value range: -50 to 0, unit: centigrade (degC), and the value is an int… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.9 | ColumnhwSetEnvTempAlarmEnable | read-write | current | Environment temperature alarm. It is an enumeration type: If the enumeration value is 1, enable the alarm of the environment temperature; If the enumeration va… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.10 | ColumnhwSetEnvTempUltraHighTempThreshold | read-write | current | Threshold of the environment ultra high temperature measurement, can be configured by users. unit: centigrade (degC), and the value is an integer (1). If the v… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.99 | ColumnhwEnvTempSensorOperStatus | read-only | current | State of the site environment temperature sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site environment temperature … |
| 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.100 | ColumnhwEnvTempSensorRowStatus | read-create | current | RowStatus of Environment temperature table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2 | TablehwEnvHumiSensorTable | not-accessible | current | Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set enviro… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1 | RowhwEnvHumiSensorEntry | not-accessible | current | Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set enviro… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.1 | ColumnhwEnvHumiSensorIndex | read-only | current | Table index of the environment humility sensors. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.2 | ColumnhwEnvHumiEquipId | read-only | current | Environment humility sensor ID |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.3 | ColumnhwEnvHumiEquipName | read-write | current | Environment humility sensor name, of the character string type, is used to specify an environment humility sensor. Users can configure it.Otherwise, the config… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.4 | ColumnhwEnvHumidity | read-only | current | Environment humility. It is an environment parameter collected in real time. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value i… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.5 | ColumnhwSetEnvHumidityUpperLimit | read-write | current | Upper threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.6 | ColumnhwSetEnvHumidityLowerLimit | read-write | current | Lower threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.7 | ColumnhwSetEnvHumidityMeasureUpperLimit | read-write | current | Upper threshold of the environment humility measurement, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.8 | ColumnhwSetEnvHumidityMeasureLowerLimit | read-write | current | Lower threshold of the environment humility measurement, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.9 | ColumnhwSetEnvHumiAlarmEnable | read-write | current | Environment humility alarm. It is an enumeration type: If the enumeration value is 1, enable the alarm of the environment humility; If the enumeration value is… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.99 | ColumnhwEnvHumiSensorOperStatus | read-only | current | State of the site environment humidity sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site environment humidity sensor… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.100 | ColumnhwEnvHumiSensorRowStatus | read-create | current | RowStatus of Environment humidity table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3 | TablehwSpareDigitalTable | not-accessible | current | Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to se… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1 | RowhwSpareDigitalEntry | not-accessible | current | Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to se… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.1 | ColumnhwSpareDigitalIndex | read-only | current | Spare digital table index, which value range: 1 to 256. Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.2 | ColumnhwSpareDigitalEquipId | read-only | current | Spare digital device ID. Value range: 011'001 to 011'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.3 | ColumnhwSpareDigitalEquipName | read-write | current | Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.4 | ColumnhwSpareDigitalAlarmTension | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a low-tension alarm; If the value of the node is 2, it indic… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.5 | ColumnhwSpareDigitalAlarmEnable | read-write | current | Spare digital alarm enabling. It is an enumeration type: If the enumeration value is 1, it means to enable the alarm; If the enumeration value is 2, it means t… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.99 | ColumnhwSpareDigitalOperStatus | read-only | current | State of the site Spare digital. It is an enumeration type: If the enumeration value is 1, it indicates that the Spare digital operation state is normal; If th… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.3.1.100 | ColumnhwSpareDigitalRowStatus | read-create | current | RowStatus of of the site Spare digital. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4 | TablehwSpareDigitalOutputTable | not-accessible | current | Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to se… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1 | RowhwSpareDigitalOutputEntry | not-accessible | current | Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to se… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.1 | ColumnhwSpareDigitalOutputIndex | read-only | current | Spare digital table index, which value range: 1 to 256. Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.2 | ColumnhwSpareDigitalOutputEquipId | read-only | current | Spare digital device ID. Value range: 012'001 to 012'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.3 | ColumnhwSpareDigitalOutputEquipName | read-write | current | Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.4 | ColumnhwSetSpareDigitalOutputAlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a low-tension alarm; If the value of the node is 2, it indic… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.5 | ColumnhwSetSpareDigitalOutputEnable | read-write | current | Spare digital alarm enabling. It is an enumeration type: If the enumeration value is 1, it means to enable the alarm; If the enumeration value is 2, it means t… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.99 | ColumnhwSpareDigitalOutputOperStatus | read-only | current | State of the site Spare digital. It is an enumeration type: If the enumeration value is 1, it indicates that the Spare digital operation state is normal; If th… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.4.1.100 | ColumnhwSpareDigitalOutputRowStatus | read-create | current | RowStatus of Spare digital device table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5 | TablehwTemp1Table | not-accessible | current | Temp1 Table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1 | RowhwTemp1Entry | not-accessible | current | Temp1 Table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.1 | ColumnhwTemp1Index | read-only | current | Table index of the temp1 sensors. Value range: 1 to 256. Lines of the device list are restricted by the quantity of temp1 sensors (hwEnvHumiSensorsTotalQuantit… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.2 | ColumnhwTemp1EquipId | read-only | current | Temp1 sensor ID, can be configured by users. Value range: 026'000 to 026'255, in which the first digits indicate the device type and the last three digits indi… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.3 | ColumnhwTemp1EquipName | read-only | current | Temp1 sensor name, of the character string type, is used to specify an temp1 sensor. Users can configure it. Otherwise, the configured character can not be any… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.4 | ColumnhwTemp1Value | read-only | current | Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.5 | ColumnhwTemp1HighLimit | read-write | current | Upper threshold of the temp1 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.6 | ColumnhwTemp1LowLimit | read-write | current | Lower threshold of the temp1 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.5.1.99 | ColumnhwTemp1OperStatus | read-only | current | State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If th… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6 | TablehwTemp2Table | not-accessible | current | Temp2 Table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1 | RowhwTemp2Entry | not-accessible | current | Temp2 Table. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.1 | ColumnhwTemp2Index | read-only | current | Table index of the temp2 sensors. Value range: 1 to 256. Lines of the device list are restricted by the quantity of temp2 sensors (hwEnvHumiSensorsTotalQuantit… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.2 | ColumnhwTemp2EquipId | read-only | current | Temp2 sensor ID, can be configured by users. Value range: 027'000 to 027'255, in which the first digits indicate the device type and the last three digits indi… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.3 | ColumnhwTemp2EquipName | read-only | current | Temp2 sensor name, of the character string type, is used to specify an temp2 sensor. Users can configure it. Otherwise, the configured character can not be any… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.4 | ColumnhwTemp2Value | read-only | current | Temp2. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.5 | ColumnhwTemp2HighLimit | read-write | current | Upper threshold of the temp2 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.6 | ColumnhwTemp2LowLimit | read-write | current | Lower threshold of the temp2 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.6.1.99 | ColumnhwTemp2OperStatus | read-only | current | State of the site temp2 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state; If th… |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13 | TablehwSmokeSensorTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13.1 | RowhwSmokeSensorEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13.1.1 | ColumnhwSmokeSensorIndex | read-only | current | The tem_hum equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13.1.2 | ColumnhwSmokeSensorEquipId | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13.1.3 | ColumnhwSmokeEquipName | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.13.1.4 | ColumnhwSmokeSensorStatus | read-only | current | The smoke sensor status |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14 | TablehwWaterSensorTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14.1 | RowhwWaterSensorEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14.1.1 | ColumnhwWaterSensorIndex | read-only | current | The tem_hum equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14.1.2 | ColumnhwWaterSensorEquipId | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14.1.3 | ColumnhwWaterEquipName | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.14.1.4 | ColumnhwWaterSensorStatus | read-only | current | The smoke sensor status |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15 | TablehwDoorSensorTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15.1 | RowhwDoorSensorEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15.1.1 | ColumnhwDoorSensorIndex | read-only | current | The tem_hum equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15.1.2 | ColumnhwDoorSensorEquipId | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15.1.3 | ColumnhwDoorEquipName | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.8.2.15.1.4 | ColumnhwDoorSensorStatus | read-only | current | The smoke sensor status |
| 1.3.6.1.4.1.2011.6.164.1.9 | NodehwSiteInverters | |||
| 1.3.6.1.4.1.2011.6.164.1.9.1 | NodehwInverterGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.9.1.1 | ScalarhwInverterGroupId | read-only | current | Inverter unit group ID. It is the unique ID of the Inverter unit group. The first digits indicate the device type. The last three digits indicate the device SN… |
| 1.3.6.1.4.1.2011.6.164.1.9.1.2 | ScalarhwInverterGroupName | read-write | current | Inverter unit group name, of the character string type, can be configured by users.Otherwise, the configured character can not be any other languages except En… |
| 1.3.6.1.4.1.2011.6.164.1.9.1.3 | ScalarhwInverterQuantity | read-only | current | Total site intelligent Inverters. |
| 1.3.6.1.4.1.2011.6.164.1.9.2 | NodehwInverter | |||
| 1.3.6.1.4.1.2011.6.164.1.9.2.1 | TablehwInverterTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1 | RowhwInverterEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.1 | ColumnhwInverterIndex | read-only | current | Inverter table index,which value range:1 to 256.Lines of the device list are restricted by the quantity of Inverter. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.2 | ColumnhwInverterEquipId | read-only | current | Inverter device ID. Value range: 018'001 to 018'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.3 | ColumnhwInverterEquipName | read-only | current | Inverter name, of the character string type, is used to specify Inverters. Users can configure it.Otherwise, the configured character can not be any other lang… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.4 | ColumnhwInverterAcOutputVolt | read-only | current | Inverter AC Output voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), … |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.5 | ColumnhwInverterAcOutputCurr | read-only | current | Inverter AC Output current, Value range: 0.0 to 10000.0. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), … |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.6 | ColumnhwInverterAcOutputFreq | read-only | current | Inverter AC Output frequency, Value range: 0 to 10000. Unit: Hz. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.7 | ColumnhwInverterAcOutputActivePower | read-only | current | Inverter AC Output power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.8 | ColumnhwInverterAcOutputVA | read-only | current | Inverter AC Output power, Value range: 0.0 to 100000.0. Unit: VA. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), … |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.9 | ColumnhwInverterAcInputVolt | read-only | current | Inverter AC Input voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.10 | ColumnhwInverterAcInputCurr | read-only | current | Inverter AC Input current, Value range: 0.0 to 10000.0. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.11 | ColumnhwInverterAcInputFreq | read-only | current | Inverter AC Input frequency, Value range: 0 to 10000. Unit: Hz. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.12 | ColumnhwInverterAcInputActivePower | read-only | current | Inverter AC Input power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.13 | ColumnhwInverterAcInputVA | read-only | current | Inverter AC Input power, Value range: 0.0 to 10000.0. Unit: VA. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.14 | ColumnhwInverterDcInputVolt | read-only | current | Inverter DC Input voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.15 | ColumnhwInverterDcInputCurr | read-only | current | Inverter DC Input current, Value range: 0 to 10000. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it in… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.16 | ColumnhwInverterDcInputPower | read-only | current | Inverter DC Input power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.17 | ColumnhwInverterRevision | read-only | current | Inverter software version number. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.18 | ColumnhwInverterPhaseNum | read-only | current | Inverter Number of the phase module, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.19 | ColumnhwInverterAcGroupNum | read-only | current | Inverter Number of AC group, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.20 | ColumnhwInverterDcGroupNum | read-only | current | Inverter Number of DC group, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.21 | ColumnhwInverterMajorAlarmNum | read-only | current | Inverter Number of Major alarm, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.22 | ColumnhwInverterMinorAlarmNum | read-only | current | Inverter Number of Minor alarm, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.23 | ColumnhwInverterT2SSerialNum | read-only | current | Inverter T2S serial number, Value range: 0 to 4294967295. If the value is 4294967295(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.24 | ColumnhwInverterModuleTemp | read-only | current | Inverter module Temperature, Value range: -300 to 10000. Unit: degC. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.99 | ColumnhwInverterOperStatus | read-only | current | State of the Inverter. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumeration valu… |
| 1.3.6.1.4.1.2011.6.164.1.9.2.1.1.100 | ColumnhwInverterRowStatus | read-only | current | RowStatus of Inverter table. |
| 1.3.6.1.4.1.2011.6.164.1.10 | NodehwSiteCoolingDevices | |||
| 1.3.6.1.4.1.2011.6.164.1.10.1 | NodehwCoolingDevicesGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.10.1.1 | ScalarhwCoolingDevicesEquipId | read-only | current | CoolingDevices unit group ID. Value range: 019'001 to 019'255, in which the first digits indicate the device type and the last three digits indicate the device… |
| 1.3.6.1.4.1.2011.6.164.1.10.1.2 | ScalarhwCoolingDevicesEquipName | read-write | current | CoolingDevices unit group name, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages ex… |
| 1.3.6.1.4.1.2011.6.164.1.10.1.3 | ScalarhwCoolingDevicesMode | read-write | current | State of the CoolingDevices TC mode. It is an enumeration type: If the enumeration value is 1, it indicates that the CoolingDeviecs is in fanOnly state; If the… |
| 1.3.6.1.4.1.2011.6.164.1.10.1.4 | ScalarhwCoolingDevicesHighTempAlarmTreshold | read-write | current | CoolingDevices high temp alarm tres, Value range: 25 to 80 Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates th… |
| 1.3.6.1.4.1.2011.6.164.1.10.1.5 | ScalarhwCoolingDevicesHighTempAlarmClearTreshold | read-write | current | CoolingDevices high temp alarm clear tres, Value range: 25 to 80 Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indica… |
| 1.3.6.1.4.1.2011.6.164.1.10.1.6 | ScalarhwCoolingDevicesExpelHidry | read-write | current | State of the CoolingDevices expel hidry. It is an enumeration type: If the enumeration value is 1, it indicates that the CoolingDeviecs is in no state; If the … |
| 1.3.6.1.4.1.2011.6.164.1.10.2 | NodehwCoolingDevicesEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.10.2.1 | TablehwFanTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1 | RowhwFanEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.1 | ColumnhwFanIndex | read-only | current | Fan table index,which value range: 1 to 256. Lines of the device list are restricted by the quantity of Fan. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.2 | ColumnhwFanEquipId | read-only | current | Fan device ID. Value range: 020'001 to 020'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.3 | ColumnhwFanEquipName | read-only | current | Fan name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other languages exc… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.4 | ColumnhwFanCtrlMode | read-write | current | State of the Fan ctrl mode. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in autoControl state; If the enumeration val… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.5 | ColumnhwFan1Status | read-only | current | State of the Fan1 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.6 | ColumnhwFan2Status | read-only | current | State of the Fan2 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.7 | ColumnhwFan3Status | read-only | current | State of the Fan3 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.8 | ColumnhwFan4Status | read-only | current | State of the Fan4 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.9 | ColumnhwFan1Speed | read-only | current | Fan1 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.10 | ColumnhwFan2Speed | read-only | current | Fan2 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.11 | ColumnhwFan3Speed | read-only | current | Fan3 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.12 | ColumnhwFan4Speed | read-only | current | Fan4 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.99 | ColumnhwFanOperStatus | read-only | current | State of the fan. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumeration value is … |
| 1.3.6.1.4.1.2011.6.164.1.10.2.1.1.100 | ColumnhwFanRowStatus | read-create | current | RowStatus fo fan table. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2 | TablehwDcAirConditionTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1 | RowhwDcAirConditionEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.1 | ColumnhwDcAirIndex | read-only | current | Dc aircondition table index |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.2 | ColumnhwDcAirEquipId | read-only | current | Dc aircondition device ID. |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.3 | ColumnhwDcAirEquipName | read-only | current | Dc aircondition name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other l… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.4 | ColumnhwDcAirCtrlMode | read-write | current | State of the Dc aircondition ctrl mode. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in autoControl state… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.5 | ColumnhwDcAirCtrlOnOff | read-write | current | State of the Dc aircondition control on or off. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in on state;… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.6 | ColumnhwDcAirRunStatus | read-only | current | State of the Dc aircondition run status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in standby state; I… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.7 | ColumnhwDcAirCompressorRunStatus | read-only | current | State of the Dc air compressor run status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in standby state;… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.8 | ColumnhwDcAirInnrFanSpeed | read-only | current | Dc aircondition innr speed, Value range: 0 to 60000. Unit: rpm, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the … |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.9 | ColumnhwDcAirOuterFanSpeed | read-only | current | Dc aircondition outer speed, Value range: 0.0 to 60000.0. Unit: rpm, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.10 | ColumnhwDcAirCompressorRunTime | read-only | current | Dc aircondition compressor run time, Value range: 0 to 175200. Unit: h, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that … |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.11 | ColumnhwDcAirRunTime | read-only | current | Dc aircondition run time, Value range: 0 to 175200. Unit: H, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value i… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.13 | ColumnhwDcAirEnterChannelTemp | read-only | current | Dc aircondition enter channel temperature, Value range:-500.0 to 1000.0. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), i… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.14 | ColumnhwDcAirPowerOnTempPoint | read-write | current | Dc aircondition power on temperature point, Value range:-200 to 800. Unit: degC. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indica… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.15 | ColumnhwDcAirPowerOffTempPoint | read-write | current | Dc aircondition power off temperature point, Value range:-200 to 800 Unit: degC. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indica… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.17 | ColumnhwAcOffEnergySaving | read-write | current | State of the Dc air energy saving status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in disable state; … |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.18 | ColumnhwDcAirPowerOnAcOffPoint | read-write | current | Dc aircondition power on ac fail temperature point, Value range:-200 to 800. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.19 | ColumnhwDcAirPowerOffAcOffPoint | read-write | current | Dc aircondition compressor start temperature point, Value range:-200 to 800. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.21 | ColumnhwDcAirEquipAddress | read-only | current | DC Air Device address And the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.99 | ColumnhwDcAirOperStatus | read-only | current | State of the dc aircondition. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the standby state; If the enumerat… |
| 1.3.6.1.4.1.2011.6.164.1.10.2.2.1.100 | ColumnhwDcAirRowStatus | read-create | current | RowStatus fo dc aircondition table. |
| 1.3.6.1.4.1.2011.6.164.1.11 | NodehwSiteAcAmmeters | |||
| 1.3.6.1.4.1.2011.6.164.1.11.2 | NodehwSiteAcAmmeterEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.11.2.1 | TablehwSiteAcAmmeterTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1 | RowhwSiteAcAmmeterEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.1 | ColumnhwAcAmmeterIndex | read-only | current | Ac Ammeter table index,which value range:4096 to 20479. Lines of the device list are restricted by the quantity of AcAmmeter |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.2 | ColumnhwAcAmmeterEquipId | read-only | current | Ac Ammeter device ID. Value range: 022'001 to 022'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.3 | ColumnhwAcAmmeterEquipName | read-only | current | Ac Ammeter name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other langua… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.4 | ColumnhwAcAmmeterFrequency | read-only | current | Ac Ammeter frequency, Value range: 0.00 to 1000.00. Unit: Hz. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it … |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.5 | ColumnhwAcAmmeterPhaseL1Voltage | read-only | current | Ac Ammeter phase a voltage, Value range: 0.00 to 2000.00. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF)… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.6 | ColumnhwAcAmmeterPhaseL2Voltage | read-only | current | Ac Ammeter phase b voltage, Value range: 0.00 to 2000.0. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF),… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.7 | ColumnhwAcAmmeterPhaseL3Voltage | read-only | current | Ac Ammeter phase c voltage, Value range: 0.00 to 2000.0. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF),… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.8 | ColumnhwAcAmmeterSetChannelNum | read-write | current | Ac Ammeter set channel number, Value range: 1 to 4. Unit: NA. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the va… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.9 | ColumnhwAcAmmeterClear | read-write | current | Ac Ammeter clear communication failure . It is an enumeration type: If the enumeration value is 1, it indicates that the ac ammeter clear communication failure… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.10 | ColumnhwAcAmmeterType | read-only | current | Ac Ammeter type, Value range: 0 to 65535. And the value is an integer(1). |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.11 | ColumnhwAcAmmeterVersion | read-only | current | Ac Ammeter version, of the character string type, is used to specify Ac Ammeter. Users can not configure it. |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.12 | ColumnhwAcAmmeterPhaseL1CurrentCH1 | read-only | current | Ac Ammeter phase a current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.13 | ColumnhwAcAmmeterPhaseL2CurrentCH1 | read-only | current | Ac Ammeter phase b current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.14 | ColumnhwAcAmmeterPhaseL3CurrentCH1 | read-only | current | Ac Ammeter phase c current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.15 | ColumnhwAcAmmeterTotalActivePowerCH1 | read-only | current | Ac Ammeter phase c current of channel 1, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value i… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.16 | ColumnhwAcAmmeterTotalPowerFactorCH1 | read-only | current | Ac Ammeter total power factor of channel 1, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.17 | ColumnhwAcAmmeterTotalActiveEngryAccCH1 | read-only | current | Ac Ammeter total active engry acc of channel 1, Value range: 0.00 to 1000000000.00. Unit: kWh. and the value is accurate to two decimal space (.01). If the val… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.18 | ColumnhwAcAmmeterPhaseL1CurrentCH2 | read-only | current | Ac Ammeter phase a current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.19 | ColumnhwAcAmmeterPhaseL2CurrentCH2 | read-only | current | Ac Ammeter phase b current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.20 | ColumnhwAcAmmeterPhaseL3CurrentCH2 | read-only | current | Ac Ammeter phase c current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.21 | ColumnhwAcAmmeterTotalActivePowerCH2 | read-only | current | Ac Ammeter phase c current of channel 2, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value i… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.22 | ColumnhwAcAmmeterTotalPowerFactorCH2 | read-only | current | Ac Ammeter total power factor of channel 2, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.23 | ColumnhwAcAmmeterTotalActiveEngryAccCH2 | read-only | current | Ac Ammeter total active engry acc of channel 2, Value range: 0.00 to 1000000000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.24 | ColumnhwAcAmmeterPhaseL1CurrentCH3 | read-only | current | Ac Ammeter phase a current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.25 | ColumnhwAcAmmeterPhaseL2CurrentCH3 | read-only | current | Ac Ammeter phase b current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.26 | ColumnhwAcAmmeterPhaseL3CurrentCH3 | read-only | current | Ac Ammeter phase c current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 214748364… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.27 | ColumnhwAcAmmeterTotalActivePowerCH3 | read-only | current | Ac Ammeter phase c current of channel 3, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value i… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.28 | ColumnhwAcAmmeterTotalPowerFactorCH3 | read-only | current | Ac Ammeter total power factor of channel 3, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.29 | ColumnhwAcAmmeterTotalActiveEngryAccCH3 | read-only | current | Ac Ammeter total active engry acc of channel 3, Value range: 0.00 to 1000000000.00. Unit: kWh. and the value is accurate to two decimal space (.01). If the val… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.30 | ColumnhwAcAmmeterPhaseL1CurrentCH4 | read-only | current | Ac Ammeter phase a current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.31 | ColumnhwAcAmmeterPhaseL2CurrentCH4 | read-only | current | Ac Ammeter phase b current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.32 | ColumnhwAcAmmeterPhaseL3CurrentCH4 | read-only | current | Ac Ammeter phase c current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.33 | ColumnhwAcAmmeterTotalActivePowerCH4 | read-only | current | Ac Ammeter phase c current of channel 4, Value range: -1000000 to 1000000. Unit: kW. and the value is accurate to two decimal space (.01). If the value is 2147… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.34 | ColumnhwAcAmmeterTotalPowerFactorCH4 | read-only | current | Ac Ammeter total power factor of channel 4, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7F… |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.35 | ColumnhwAcAmmeterTotalActiveEngryAccCH4 | read-only | current | Ac Ammeter total active engry acc of channel 4, Value range: 0 to 1000000000. Unit: kWh. and the value is accurate to two decimal space (.01). If the value is … |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.99 | ColumnhwAcAmmeterOperStatus | read-only | current | State of the Ac Ammeter. It is an enumeration type: If the enumeration value is 1, it indicates that the Ac Ammeter is in the normal state; If the enumeration … |
| 1.3.6.1.4.1.2011.6.164.1.11.2.1.1.100 | ColumnhwAcAmmeterRowStatus | read-create | current | RowStatus fo Ac Ammeter table. |
| 1.3.6.1.4.1.2011.6.164.1.12 | NodehwSiteDG | |||
| 1.3.6.1.4.1.2011.6.164.1.12.1 | NodehwDGGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.12.1.1 | ScalarhwDGGroupId | read-only | current | Device group ID of the DG module. It is the unique ID of the DG module group, and its default value: 023,000. The first digits indicate the device type and the… |
| 1.3.6.1.4.1.2011.6.164.1.12.1.2 | ScalarhwDGGroupName | read-only | current | Name of the DG module group, character string type, is used to specify the DG module group. Otherwise, the configured character can not be any other languages … |
| 1.3.6.1.4.1.2011.6.164.1.12.1.3 | ScalarhwDGAmount | read-write | current | Total quantity of the DG modules. Value range: 0 to 2. Units:pcs. |
| 1.3.6.1.4.1.2011.6.164.1.12.2 | NodehwDG | |||
| 1.3.6.1.4.1.2011.6.164.1.12.2.1 | TablehwDGTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1 | RowhwDGEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.1 | ColumnhwDGIndex | read-only | current | DG table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of DG. |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.2 | ColumnhwDGEquipId | read-only | current | DG device ID. Value range: 023'001 to 023'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.3 | ColumnhwDGEquipName | read-only | current | Device name of the DG module, character string type, is used to specify the DG module. Otherwise, the configured character can not be any other languages excep… |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.4 | ColumnhwDGType | read-only | current | Specific type of the DG module. It is an enumeration type: If the enumeration value is 1, it indicates a intelligent DG module; If the enumeration value is 2, … |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.5 | ColumnhwDGAphaseVoltage | read-only | current | A-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.6 | ColumnhwDGBphaseVoltage | read-only | current | B-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.7 | ColumnhwDGCphaseVoltage | read-only | current | C-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.8 | ColumnhwDGAphaseCurrent | read-only | current | A-phase current. Value range: 0 to 100, units: A, and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.9 | ColumnhwDGBphaseCurrent | read-only | current | B-phase current. Value range: 0 to 100, units: A, and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.10 | ColumnhwDGCphaseCurrent | read-only | current | C-phase current. Value range: 0 to 100, units: A, and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.11 | ColumnhwDGOutputPower | read-only | current | DG output power. Value range: 0 to 100, units: kw, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.12 | ColumnhwDGFrequency | read-only | current | The frequency of DG. Value range: 5 to 120, units: Hz, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.13 | ColumnhwDGBatteryVoltage | read-only | current | The voltage of DG battery. Value range: 0 to 24, units: V, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.14 | ColumnhwDGTotalRuntime | read-only | current | The total running time of DG, Value range: 0 to 876000, units: h, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.15 | ColumnhwDGAphasePowerFactor | read-only | current | A phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.16 | ColumnhwDGBphasePowerFactor | read-only | current | B phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.17 | ColumnhwDGCphasePowerFactor | read-only | current | C phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.18 | ColumnhwDGLoadRate | read-only | current | The load rate of DG, Value range: 0 to 100, units: %, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.19 | ColumnhwDGOnOffControl | read-write | current | Power-on or power-off of the DG module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on or power… |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.20 | ColumnhwDGFaultReset | read-write | current | DG fault reset. |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.21 | ColumnhwDGMaintenanceConfirm | read-write | current | DG maintenance confirm. |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.99 | ColumnhwDGOperStatus | read-only | current | State of the DG. It is an enumeration type: If the enumeration value is 1, it indicates that the DG is in the normal state; If the enumeration value is 2, it i… |
| 1.3.6.1.4.1.2011.6.164.1.12.2.1.1.100 | ColumnhwDGRowStatus | read-create | current | RowStatus fo DG. |
| 1.3.6.1.4.1.2011.6.164.1.13 | NodehwSiteSSU | |||
| 1.3.6.1.4.1.2011.6.164.1.13.1 | NodehwSSUGroup | |||
| 1.3.6.1.4.1.2011.6.164.1.13.1.1 | ScalarhwSSUGroupId | read-only | current | Device group ID of the SSU module. It is the unique ID of the SSU module group, and its default value: 024,000. The first digits indicate the device type and t… |
| 1.3.6.1.4.1.2011.6.164.1.13.1.2 | ScalarhwSSUGroupName | read-only | current | Name of the SSU module group, character string type, is used to specify the SSU module group. Otherwise, the configured character can not be any other language… |
| 1.3.6.1.4.1.2011.6.164.1.13.1.3 | ScalarhwSSUTotalCurrent | read-only | current | The total output current of SSU. Value range: 0 to 1000, units: A, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.13.1.4 | ScalarhwSSUTotalOutputPower | read-only | current | The total output current of SSU. Value range: 0 to 10000000, units: kWh, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.13.1.5 | ScalarhwSSUClearLostAlarms | read-write | current | Clear the lost alarm of SSU. |
| 1.3.6.1.4.1.2011.6.164.1.13.1.6 | ScalarhwSSUAmount | read-only | current | Total quantity of the SSU modules. Value range: 0 to 100. Units:pcs. |
| 1.3.6.1.4.1.2011.6.164.1.13.2 | NodehwSSU | |||
| 1.3.6.1.4.1.2011.6.164.1.13.2.1 | TablehwSSUTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1 | RowhwSSUEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.1 | ColumnhwSSUIndex | read-only | current | SSU table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of SSU. |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.2 | ColumnhwSSUEquipId | read-only | current | SSU device ID. Value range: 024'001 to 024'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.3 | ColumnhwSSUEquipName | read-only | current | Device name of the SSU module, character string type, is used to specify the SSU module. Otherwise, the configured character can not be any other languages exc… |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.4 | ColumnhwSSURunningState | read-only | current | The running status of the SSU module. It is an enumeration type: If the enumeration value is 1, it indicates that the SSU module is power on ; If the enumerati… |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.5 | ColumnhwSSUInputVoltage | read-only | current | The input voltage of SSU, Value range: 0 to 200, units: V, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.6 | ColumnhwSSUOutputVoltage | read-only | current | The output voltage of SSU, Value range: 0 to 200, units: V, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.7 | ColumnhwSSUOutputCurrent | read-only | current | The output current of SSU, Value range: 0 to 1000, units: A, and the value is one decimal space (.1). |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.8 | ColumnhwSSUAddress | read-only | current | The address of SSU, Value range: 0 to 100, units: , and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.13.2.1.1.100 | ColumnhwSSURowStatus | read-create | current | RowStatus fo SSU. |
| 1.3.6.1.4.1.2011.6.164.1.14 | NodehwSiteBatteryCabinets | |||
| 1.3.6.1.4.1.2011.6.164.1.14.2 | NodehwSiteBatteryCabinetEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.14.2.1 | TablehwSiteBatteryCabinetTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1 | RowhwSiteBatteryCabinetEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.1 | ColumnhwBatteryCabinetIndex | read-only | current | Battery Cabinet table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.2 | ColumnhwBatteryCabinetEquipId | read-only | current | Battery Cabinet device ID. Value range: 025'001 to 025'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.3 | ColumnhwBatteryCabinetEquipName | read-only | current | Battery Cabinet name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be … |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.4 | ColumnhwBatteryCabinetIndoorVentTemp | read-only | current | Indoor vent temperature. It is an environment parameter collected in real time. Value range: -40 to +100, units: centigrade, and the value is an integer (1). I… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.5 | ColumnhwBatteryCabinetBattTemp | read-only | current | Battery temperature. It is an environment parameter collected in real time. Value range: -40 to +100, units: centigrade, and the value is an integer (1). If th… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.6 | ColumnhwBatteryCabinetFan1Speed | read-only | current | Fan 1 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.7 | ColumnhwBatteryCabinetFan2Speed | read-only | current | Fan 2 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.8 | ColumnhwBatteryCabinetFan3Speed | read-only | current | Fan 3 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.9 | ColumnhwBatteryCabinetFan4Speed | read-only | current | Fan 4 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.10 | ColumnhwBatteryCabinetAirConditionerStatus | read-only | current | State of the airconditioner. It is an enumeration type: If the enumeration value is 1, it indicates that the airconditioner is in the standby state; If the enu… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.11 | ColumnhwBatteryCabinetCompressorStatus | read-only | current | State of the compressor. It is an enumeration type: If the enumeration value is 1, it indicates that the compressor is in the standby state; If the enumeration… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.12 | ColumnhwBatteryCabinetInternalFanSpeed | read-only | current | Internal Fan speed, Value range: 0 to 10000. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured. |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.13 | ColumnhwBatteryCabinetExternalFanSpeed | read-only | current | External Fan speed, Value range: 0 to 10000. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the temperature sensor is not config… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.14 | ColumnhwBatteryCabinetAirConditionerRuntime | read-only | current | Total runtime of the air conditioner. Value units: hour (h), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the val… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.15 | ColumnhwBatteryCabinetCompressorRuntime | read-only | current | Total runtime of the compressor. Value units: hour (h), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.16 | ColumnhwBatteryCabinetAirConWorkTemp | read-write | current | Battery cabinet aircondition power on temperature point, Value range:-20 to 80 Unit: degC. and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.17 | ColumnhwBatteryCabinetAirConStopTemp | read-write | current | Battery cabinet aircondition power off temperature point, Value range:-20 to 80 Unit: degC. and the value is an integer(1). |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.99 | ColumnhwBatteryCabinetOperStatus | read-only | current | State of the Battery Cabinet. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumerati… |
| 1.3.6.1.4.1.2011.6.164.1.14.2.1.1.100 | ColumnhwBatteryCabinetRowStatus | read-create | current | RowStatus fo Battery Cabinet table. |
| 1.3.6.1.4.1.2011.6.164.1.15 | NodehwSiteEsdu | |||
| 1.3.6.1.4.1.2011.6.164.1.15.2 | TablehwEsduTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1 | RowhwEsduEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.1 | ColumnhwEsduIndex | read-only | current | ESDU equip index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.2 | ColumnhwEsduEquipId | read-only | current | Esdu device ID. Value range: 028,001 to 028,255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.3 | ColumnhwEsduEquipName | read-only | current | / |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.4 | ColumnhwEsduSetDigitalInput1AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.5 | ColumnhwEsduDigitalInput1OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.6 | ColumnhwEsduSetDigitalInput2AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.7 | ColumnhwEsduDigitalInput2OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.8 | ColumnhwEsduSetDigitalInput3AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.9 | ColumnhwEsduDigitalInput3OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.10 | ColumnhwEsduSetDigitalInput4AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.11 | ColumnhwEsduDigitalInput4OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.12 | ColumnhwEsduSetDigitalInput5AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.13 | ColumnhwEsduDigitalInput5OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.14 | ColumnhwEsduSetDigitalInput6AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value.If the value of the node is 1, it indicates a high-tension alarm;If the value of the node is 2, it indica… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.15 | ColumnhwEsduDigitalInput6OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.16 | ColumnhwEsduSetDigitalInput7AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.17 | ColumnhwEsduDigitalInput7OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.18 | ColumnhwEsduSetDigitalInput8AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.19 | ColumnhwEsduDigitalInput8OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.20 | ColumnhwEsduSetDigitalInput9AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.21 | ColumnhwEsduDigitalInput9OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.22 | ColumnhwEsduSetDigitalInput10AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.23 | ColumnhwEsduDigitalInput10OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.24 | ColumnhwEsduSetDigitalInput11AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.25 | ColumnhwEsduDigitalInput11OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.26 | ColumnhwEsduSetDigitalInput12AlarmCondition | read-write | current | Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indi… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.27 | ColumnhwEsduDigitalInput12OperStatus | read-only | current | It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.28 | ColumnhwEsduBtempValue | read-only | current | Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, Unit: degC and the value is an integer (1). If the value is -1024, it in… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.31 | ColumnhwEsduBtempOperStatus | read-only | current | State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If th… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.32 | ColumnhwEsduTemp1Value | read-only | current | Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.33 | ColumnhwEsduTemp1HighLimit | read-write | current | Upper threshold of the temp1 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.34 | ColumnhwEsduTemp1LowLimit | read-write | current | Lower threshold of the temp1 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.35 | ColumnhwEsduTemp1OperStatus | read-only | current | State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If th… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.36 | ColumnhwEsduTemp2Value | read-only | current | Temp2. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.37 | ColumnhwEsduTemp2HighLimit | read-write | current | Upper threshold of the temp2 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value … |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.38 | ColumnhwEsduTemp2LowLimit | read-write | current | Lower threshold of the temp2 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.39 | ColumnhwEsduTemp2OperStatus | read-only | current | State of the site temp2 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state; If th… |
| 1.3.6.1.4.1.2011.6.164.1.15.2.1.40 | ColumnhwEsduDoorSensorConnect | read-write | current | Door Sensor Connected; It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates Door Sensor is disable; If the enumeratio… |
| 1.3.6.1.4.1.2011.6.164.1.17 | NodehwAcbGroupEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.17.1 | TablehwAcbGroupSampTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1 | RowhwAcbGroupSampEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.1 | ColumnhwAcbGroupIndex | read-only | current | The battery group equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.2 | ColumnhwAcbGroupEquipId | read-only | current | The battery group equip ID no. |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.3 | ColumnhwAcbGroupEquipName | read-only | current | The battery group equip name. |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.4 | ColumnhwAcbGroupBatRunningState | read-only | current | State of the Battery group unit running state. It is an enumeration type: If the enumeration value is 1, it indicates the Battery is first on line, If the enum… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.5 | ColumnhwAcbGroupBatVolt | read-only | current | The battery volt; Value range: 0 to 100, units: V. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates th… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.6 | ColumnhwAcbGroupBatCurr | read-only | current | The battery current; Value range: -4000 to 4000, units: A. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indi… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.7 | ColumnhwAcbGroupTotalCapacity | read-only | current | The battery total capacity; Value range: 0 to 10000, units: Ah. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.8 | ColumnhwAcbGroupTotalRemainCapacity | read-only | current | The battery total remain capacity; Value range:0 to 100, units: %. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF),… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.9 | ColumnhwAcbGroupTemperature | read-only | current | The battery temperature; Value range:-50 to 100, units: degC. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it i… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.11 | ColumnhwAcbGroupBackupTime | read-only | current | The battery backup time; Value range: 0 to 256, units: h. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indic… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.12 | ColumnhwAcbGroupEsmuCommNum | read-only | current | The esmu communicate number, Value range: 0 to 100. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.13 | ColumnhwAcbGroupBatSoh | read-only | current | The battery soh: 0 to 100, units: %. and the value is accurate to one decimal place (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is… |
| 1.3.6.1.4.1.2011.6.164.1.17.1.1.22 | ColumnhwAcbGroupTotalDischargeDepth | read-only | current | The battery total discharge depth, units: %. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the… |
| 1.3.6.1.4.1.2011.6.164.1.17.2 | TablehwAcbGroupSetTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1 | RowhwAcbGroupSetEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.5 | ColumnhwAcbGroupCellNum | read-only | current | Battery cell number. Value range: 1 to 32, If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.6 | ColumnhwAcbGroupSetTotalCapacity | read-only | current | The battery total capacity, units: wh. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value… |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.11 | ColumnhwAcbGroupEqualVolt | read-write | current | Battery equalcharge voltage, can be configued by users. Value range: 42 to 58, units: v, and the value is accurate to one decimal space (.1). If the value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.12 | ColumnhwAcbGroupFloatVolt | read-write | current | Battery floatcharge voltage, can be configued by users. Value range: 42 to 58, units: v, and the value is accurate to one decimal space (.1). If the value is 2… |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.13 | ColumnhwAcbGroupChargeCurrLimitThr | read-write | current | Battery charge limited threhold , can be configued by users. Value range: 0.05 to 2, units: C10, and the value is accurate to two decimal space (.01). If the s… |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.14 | ColumnhwAcbGroupOverCurThr | read-write | current | Battery over charge current limited threhold , can be configued by users. Value range: 0.15 to 1.2, units: C10, and the value is accurate to two decimal space … |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.21 | ColumnhwAcbGroupHighTempThr | read-write | current | Upper threshold of the environment temperature alarm, can be configured by users. Value range: 35 to 70, units: centigrade (��C), and the value is an integ… |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.22 | ColumnhwAcbGroupLowTempThr | read-write | current | Lower threshold of the environment temperature alarm, can be configured by users. Value range: -50 to 0, units: centigrade (degC), and the value is an integer … |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.26 | ColumnhwAcbGroupDodToAcidBattery | read-write | current | The lithium battery discharge depth for Acid Battery running; ,units: %. |
| 1.3.6.1.4.1.2011.6.164.1.17.2.1.27 | ColumnhwAcbGroupDefaultChargeCurrLimitThr | read-write | current | Battery default charge limited threhold , can be configued by users. Value range: 0.05 to 2, units: C10, and the value is accurate to two decimal space (.01). … |
| 1.3.6.1.4.1.2011.6.164.1.18 | NodehwAcbEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.18.1 | TablehwAcbBaseTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1 | RowhwAcbBaseEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1.1 | ColumnhwAcbIndex | read-only | current | The battery equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1.2 | ColumnhwAcbEquipId | read-only | current | The battery equip ID no. |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1.3 | ColumnhwAcbEquipName | read-write | current | The battery equip name. |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1.4 | ColumnhwAcbEquipAddr | read-only | current | The battery communica address. |
| 1.3.6.1.4.1.2011.6.164.1.18.1.1.5 | ColumnhwAcbSoftVar | read-only | current | The Battery software version. |
| 1.3.6.1.4.1.2011.6.164.1.18.2 | TablehwAcbSampTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1 | RowhwAcbSampEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.1 | ColumnhwAcbBatVolt | read-only | current | voltage of the battery. It indicates the real-time statistics of the battery on the site. Value range: 0 to 60, unit: V, and the value is accurate to one decim… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.2 | ColumnhwAcbBatCurr | read-only | current | Current of the battery. It indicates the real-time statistics of the battery on the site. Value range: -200 to 200, unit: A, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.3 | ColumnhwAcbRunningStatus | read-only | current | Battery charging state, indicates the charging and discharging information about the battery group. It is an enumeration type. If the enumeration value is 1, i… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.4 | ColumnhwAcbBatSoh | read-only | current | Soh of the battery. It indicates the real-time statistics of the battery on the site. Value range: 0 to 100, unit: %, and the value is accurate to two decimal … |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.5 | ColumnhwAcbBatCapacity | read-only | current | Capacity of the battery. Value range: 0 to 10000, unit: Ah, and the value is accurate to two decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it ind… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.6 | ColumnhwAcbBatCell1Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.7 | ColumnhwAcbBatCell2Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.8 | ColumnhwAcbBatCell3Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.9 | ColumnhwAcbBatCell4Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.10 | ColumnhwAcbBatCell5Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.11 | ColumnhwAcbBatCell6Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.12 | ColumnhwAcbBatCell7Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.13 | ColumnhwAcbBatCell8Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.14 | ColumnhwAcbBatCell9Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.15 | ColumnhwAcbBatCell10Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.16 | ColumnhwAcbBatCell11Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.17 | ColumnhwAcbBatCell12Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.18 | ColumnhwAcbBatCell13Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.19 | ColumnhwAcbBatCell14Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.20 | ColumnhwAcbBatCell15Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.21 | ColumnhwAcbBatCell16Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.22 | ColumnhwAcbBatCell1Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.23 | ColumnhwAcbBatCell2Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.24 | ColumnhwAcbBatCell3Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.25 | ColumnhwAcbBatCell4Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.26 | ColumnhwAcbBatCell5Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.27 | ColumnhwAcbBatCell6Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.28 | ColumnhwAcbBatCell7Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.29 | ColumnhwAcbBatCell8Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.30 | ColumnhwAcbBatCell9Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.31 | ColumnhwAcbBatCell10Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.32 | ColumnhwAcbBatCell11Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.33 | ColumnhwAcbBatCell12Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.34 | ColumnhwAcbBatCell13Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.35 | ColumnhwAcbBatCell14Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.36 | ColumnhwAcbBatCell15Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.37 | ColumnhwAcbBatCell16Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.38 | ColumnhwAcbBatCell17Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.39 | ColumnhwAcbBatCell18Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.40 | ColumnhwAcbBatCell19Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.41 | ColumnhwAcbBatCell20Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.42 | ColumnhwAcbBatCell21Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.43 | ColumnhwAcbBatCell22Temp | read-only | current | Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the v… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.44 | ColumnhwAcbBatCell17Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.45 | ColumnhwAcbBatCell18Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.46 | ColumnhwAcbBatCell19Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.47 | ColumnhwAcbBatCell20Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.48 | ColumnhwAcbBatCell21Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.2.1.49 | ColumnhwAcbBatCell22Volt | read-only | current | Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one d… |
| 1.3.6.1.4.1.2011.6.164.1.18.3 | TablehwAcbSetTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.3.1 | RowhwAcbSetEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.18.3.1.5 | ColumnhwAcbGyroEnable | read-write | current | Gyro Function Enable, Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supported. It… |
| 1.3.6.1.4.1.2011.6.164.1.18.3.1.6 | ColumnhwAcbGyroSensitivityLevel | read-write | current | Gyro Level of Sensitivity. Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supporte… |
| 1.3.6.1.4.1.2011.6.164.1.20 | NodehwSiteIbox | |||
| 1.3.6.1.4.1.2011.6.164.1.20.1 | TablehwSiteIboxTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.20.1.1 | RowhwSiteIboxEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.20.1.1.1 | ColumnhwIboxIndex | read-only | current | ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox |
| 1.3.6.1.4.1.2011.6.164.1.20.1.1.2 | ColumnhwIboxEquipId | read-only | current | ibox device ID. Value range: 029'001 to 029'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.20.1.1.3 | ColumnhwIboxEquipName | read-only | current | Ibox name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other l… |
| 1.3.6.1.4.1.2011.6.164.1.20.1.1.4 | ColumnhwIbatEquipNum | read-write | current | Number of Batteries. Value range: 0 to 96, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.21 | NodehwSiteIbat | |||
| 1.3.6.1.4.1.2011.6.164.1.21.1 | TablehwSiteIbatTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1 | RowhwSiteIbatEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.1 | ColumnhwIbatIndex | read-only | current | ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.2 | ColumnhwIbatEquipId | read-only | current | ibat device ID. Value range: 030'001 to 031'537, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.3 | ColumnhwIbatEquipName | read-only | current | Ibat name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other l… |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.4 | ColumnhwIbatTemperature | read-only | current | Ibat temperature. It is a ibat parameter collected in real time. Value range: -50 to +125, unit: centigrade (degC), and the value is an integer (1). If the val… |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.5 | ColumnhwIbatVoltage | read-only | current | Ibat Voltage of the ibat. It is an inherent attribute. Value range: 0 to 100, Units: V, and the value is accurate to one decimal place (.1). If the value is 21… |
| 1.3.6.1.4.1.2011.6.164.1.21.1.1.6 | ColumnhwIbatResistance | read-only | current | IbatResistance Value range: 0 to 1000000, units: (mohm), and the value is accurate to two decimal place (.01). |
| 1.3.6.1.4.1.2011.6.164.1.22 | NodehwSiteCommExBoard | |||
| 1.3.6.1.4.1.2011.6.164.1.22.1 | TablehwSiteCommExBoardTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.22.1.1 | RowhwSiteCommExBoardEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.22.1.1.1 | ColumnhwCommExBoardIndex | read-only | current | Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Communicat… |
| 1.3.6.1.4.1.2011.6.164.1.22.1.1.2 | ColumnhwCommExBoardEquipId | read-only | current | Communication Expansion Board device ID. Value range: 032,256 to 033,249, in which the first digits indicate the device type and the last three digits indicate… |
| 1.3.6.1.4.1.2011.6.164.1.22.1.1.3 | ColumnhwCommExBoardEquipName | read-only | current | Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured charact… |
| 1.3.6.1.4.1.2011.6.164.1.23 | NodehwSiteDGCommExBoard | |||
| 1.3.6.1.4.1.2011.6.164.1.23.1 | TablehwSiteDGCommExBoardTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.23.1.1 | RowhwSiteDGCommExBoardEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.23.1.1.1 | ColumnhwDGCommExBoardIndex | read-only | current | DG Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of DG Comm… |
| 1.3.6.1.4.1.2011.6.164.1.23.1.1.2 | ColumnhwDGCommExBoardEquipId | read-only | current | DG Communication Expansion Board device ID. Value range: 034'001, in which the first digits indicate the device type and the last three digits indicate the dev… |
| 1.3.6.1.4.1.2011.6.164.1.23.1.1.3 | ColumnhwDGCommExBoardEquipName | read-only | current | DG Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured char… |
| 1.3.6.1.4.1.2011.6.164.1.27 | NodehwElockEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.27.1 | TablehwElockEquipTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.27.1.1 | RowhwElockEquipEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.27.1.1.1 | ColumnhwElockEquipIndex | read-only | current | The elock equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.27.1.1.2 | ColumnhwElockEquipId | read-only | current | The elock equip ID no. |
| 1.3.6.1.4.1.2011.6.164.1.27.1.1.3 | ColumnhwElockEquipName | read-only | current | The elock equip name. |
| 1.3.6.1.4.1.2011.6.164.1.28 | NodehwTemHumEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.28.1 | TablehwTemHumEquipTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1 | RowhwTemHumEquipEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.1 | ColumnhwTemHumEquipIndex | read-only | current | The tem_hum equip Index. |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.2 | ColumnhwTemHumEquipId | read-only | current | The tem_hum equip ID no. |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.3 | ColumnhwTemHumEquipName | read-only | current | The tem_hum equip name. |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.4 | ColumnhwTemHumEquipAmbientTemp | read-only | current | the environment temperature. units: centigrade (degC), and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.5 | ColumnhwTemHumEquipAmbientHumidity | read-only | current | environment temperature , units: %RH, and the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.6 | ColumnhwSetHumTempUpperLimit | read-write | current | Upper threshold of the environment temperature alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer … |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.7 | ColumnhwSetHumTempLowerLimit | read-write | current | Lower threshold of the environment temperature alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer… |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.8 | ColumnhwSetHumidityUpperLimit | read-write | current | Upper threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.9 | ColumnhwSetHumidityLowerLimit | read-write | current | Lower threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value… |
| 1.3.6.1.4.1.2011.6.164.1.28.1.1.10 | ColumnhwTemHumEquipAddress | read-only | current | Device address And the value is an integer (1). |
| 1.3.6.1.4.1.2011.6.164.1.29 | NodehwHeaterEquip | |||
| 1.3.6.1.4.1.2011.6.164.1.29.1 | TablehwHeaterDeviceTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1 | RowhwHeaterDeviceEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1.1 | ColumnhwHeaterDeviceIndex | read-only | current | heater device table index. |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1.2 | ColumnhwHeaterDeviceEquipId | read-only | current | heater device equipid. |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1.3 | ColumnhwHeaterDeviceEquipName | read-only | current | heater device equipname. |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1.4 | ColumnhwHeaterStartTemperature | read-write | current | heater start temperature; Value range:-10 to 15.Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the valu… |
| 1.3.6.1.4.1.2011.6.164.1.29.1.1.5 | ColumnhwHeaterStopTemperature | read-write | current | heater stop temperature; Value range: 5 to 20.Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value … |
| 1.3.6.1.4.1.2011.6.164.1.31 | NodehwSiteDMU | |||
| 1.3.6.1.4.1.2011.6.164.1.31.1 | TablehwSiteDMUSampTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1 | RowhwSiteDMUSampEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.1 | ColumnhwDMUIndex | read-only | current | DMU table index, which value range:1 to 256. Lines of the device list are restricted by the quantity of DMU. |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.2 | ColumnhwDMUEquipId | read-only | current | DMU device ID. Value range: 033'001 to 033'255, in which the first digits indicate the device type and the last three digits indicate the device SN. |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.3 | ColumnhwDMUEquipName | read-only | current | Device name of the DMU module, character string type, is used to specify the DMU module. Otherwise, the configured character can not be any other languages exc… |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.4 | ColumnhwDMUDCOutputVoltage | read-only | current | DC output voltage: 0 to 100, units: V, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.5 | ColumnhwDMULoadCurrent | read-only | current | Load current: 0 to 30000, units: A, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. |
| 1.3.6.1.4.1.2011.6.164.1.31.1.1.6 | ColumnhwDMUTotalLoadConsumption | read-only | current | Total load consumption: 0 to 4294967295, units: kWh, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the val… |
| 1.3.6.1.4.1.2011.6.164.1.31.2 | TablehwSiteDMUSetTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1 | RowhwSiteDMUSetEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.1 | ColumnhwSiteDMULoad1LvdEn | read-write | current | load1 lvd enable :It is an enumeration type: If the enumeration value is 1, it means to disable the lvd control; If the enumeration value is 2, it means to ena… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.2 | ColumnhwSiteDMULoad1LvdMode | read-write | current | load1 lvd mode :It is an enumeration type: If the enumeration value is 1, it means the voltage mode; If the enumeration value is 2, it means the time mode |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.3 | ColumnhwSiteDMULoad1LvdVoltage | read-write | current | Low-voltage power-off voltage of the DMU unit can be configured by users. Its value range: 36 to 56, units: V, and the value is accurate to one decimal space (… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.4 | ColumnhwSiteDMULoad1LvdReconVoltage | read-write | current | Low-voltage power-off recover of the DMU unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal spac… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.5 | ColumnhwSiteDMULoad1LvdTime | read-write | current | Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1). Here, if lvd mode is time mode, value range defines be… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.6 | ColumnhwSiteDMULoad1LvdCapacity | read-write | current | Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 99, unit: %, and the valu… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.7 | ColumnhwSiteDMULoad2LvdEn | read-write | current | load1 lvd enable :It is an enumeration type: If the enumeration value is 1, it means to disable the lvd control; If the enumeration value is 2, it means to ena… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.8 | ColumnhwSiteDMULoad2LvdMode | read-write | current | load1 lvd mode :It is an enumeration type: If the enumeration value is 1, it means the voltage mode; If the enumeration value is 2, it means the time mode |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.9 | ColumnhwSiteDMULoad2LvdVoltage | read-write | current | Low-voltage power-off voltage of the DMU unit can be configured by users. Its value range: 36 to 56, units: V, and the value is accurate to one decimal space (… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.10 | ColumnhwSiteDMULoad2LvdReconVoltage | read-write | current | Low-voltage power-off recover of the DMU unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal spac… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.11 | ColumnhwSiteDMULoad2LvdTime | read-write | current | Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1). Here, if lvd mode is time mode, value range defines be… |
| 1.3.6.1.4.1.2011.6.164.1.31.2.1.12 | ColumnhwSiteDMULoad2LvdCapacity | read-write | current | Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 99, unit: %, and the valu… |
| 1.3.6.1.4.1.2011.6.164.1.33 | NodehwSiteAts | |||
| 1.3.6.1.4.1.2011.6.164.1.33.1 | TablehwAtsSampTable | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.33.1.1 | RowhwAtsSampEntry | not-accessible | current | |
| 1.3.6.1.4.1.2011.6.164.1.33.1.1.1 | ColumnhwAtsIndex | read-only | current | Table index of the running ATS modules |
| 1.3.6.1.4.1.2011.6.164.1.33.1.1.2 | ColumnhwAtsEquipId | read-only | current | ATS module ID. |
| 1.3.6.1.4.1.2011.6.164.1.33.1.1.3 | ColumnhwAtsEquipName | read-only | current | Device name of the ATS module |
| 1.3.6.1.4.1.2011.6.164.2 | NodehwSiteMonitorMIBTraps | |||
| 1.3.6.1.4.1.2011.6.164.2.1 | NodehwSiteAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.164.2.1.0 | NodehwSiteAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.0.1 | NotificationhwRectifierFaultAlarmTraps | current | When rectifiers fault alarms happen, a alarm trap will be send. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Al… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.2 | NotificationhwRectifierFaultAlarmResumeTraps | current | Rectifier Fault alarm resolved.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm por… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.3 | NotificationhwRectifierAbnormalAlarmTraps | current | Rectifier abnormal alarm, because of communication failure, module protection, or turnoff. Its correlation binding parameters: Site ID, Site name, Site descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.4 | NotificationhwRectifierAbnormalAlarmResumeTraps | current | Rectifier abnormal alarm resume. Description.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descript… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.5 | NotificationhwBattLoopBreakAlarmTraps | current | Battery loop disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port desc… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.6 | NotificationhwBattLoopBreakAlarmResumeTraps | current | Battery loop break alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm p… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.7 | NotificationhwBattLvdAlarmTraps | current | Battery disconnect for low voltage. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alar… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.8 | NotificationhwBattLvdAlarmResumeTraps | current | Battery LVD alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port des… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.9 | NotificationhwBattOverCurrAlarmTraps | current | Batterys charge in over current. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm p… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.10 | NotificationhwBattOverCurrAlarmResumeTraps | current | Batterys over current alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alar… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.11 | NotificationhwBattStringTempAlarmTraps | current | Battery string temperature is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single de… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.12 | NotificationhwBattStringTempAlarmResumeTraps | current | Battery string temperature alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.13 | NotificationhwBattDischargeAlarmTraps | current | Battery group discharge alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm por… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.14 | NotificationhwBattDischargeAlarmResumeTraps | current | Battery group discharge alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Al… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.15 | NotificationhwAcInputAlarmTraps | current | AC absent or AC power off alarms happened. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descriptio… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.16 | NotificationhwAcInputAlarmResumeTraps | current | AC input alarm resumed. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.17 | NotificationhwAcVoltAlarmTraps | current | AC voltage too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm po… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.18 | NotificationhwAcVoltAlarmResumeTraps | current | AC voltage alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port desc… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.19 | NotificationhwDcVoltAlarmTraps | current | DC voltage alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.20 | NotificationhwDcVoltAlarmResumeTraps | current | DC voltage alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port desc… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.21 | NotificationhwLoadLvdAlarmTraps | current | Loads disconnect for low voltage. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm … | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.22 | NotificationhwLoadLvdAlarmResumeTraps | current | Load LVD alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descri… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.23 | NotificationhwLoadFuseAlarmTraps | current | Load fuse broken down. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descri… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.24 | NotificationhwLoadFuseAlarmResumeTraps | current | Load fuse alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.25 | NotificationhwEnvTempAlarmTraps | current | Environment temperature is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.26 | NotificationhwEnvTempAlarmResumeTraps | current | Environment temperature alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Al… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.27 | NotificationhwEnvHumiAlarmTraps | current | Environment humidity is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descript… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.28 | NotificationhwEnvHumiAlarmResumeTraps | current | Environment humidity alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.29 | NotificationhwSpareDigitalAlarmTraps | current | Spare digital fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descript… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.30 | NotificationhwSpareDigitalAlarmResumeTraps | current | Spare digital alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port de… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.31 | NotificationhwDoorAlarmTraps | current | Door open. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.32 | NotificationhwDoorAlarmResumeTraps | current | Door alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descriptio… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.33 | NotificationhwWaterAlarmTraps | current | Water alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Ala… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.34 | NotificationhwWaterAlarmResumeTraps | current | Water alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descripti… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.35 | NotificationhwSmokeAlarmTraps | current | Site is on fire, which is detected by smoke sensors. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single … | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.36 | NotificationhwSmokeAlarmResumeTraps | current | Smoke alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descripti… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.37 | NotificationhwWireAlarmTraps | current | Wire alarm.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.38 | NotificationhwWireAlarmResumeTraps | current | Wire alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descriptio… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.39 | NotificationhwAcBreakerAlarmTraps | current | AC breaker alarm.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.40 | NotificationhwAcBreakerAlarmResumeTraps | current | AC breaker alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.41 | NotificationhwMultiRectFailureAlarmTraps | current | More than one rectifier reported fault alarms in the same time. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Al… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.42 | NotificationhwMultiRectFailureAlarmResumeTraps | current | Multi-rectifiers fault alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Ala… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.43 | NotificationhwRectRedundAlarmTraps | current | Rectifiers work redundantly, in this case that some of rectifiers will going to sleep. Its correlation binding parameters: Site ID, Site name, Site description… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.44 | NotificationhwRectRedundAlarmResumeTraps | current | Rectifiers redundant alarm resume, when the power supply and requirement were in balance. Its correlation binding parameters: Site ID, Site name, Site descript… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.45 | NotificationhwBattUnbalanceAlarmTraps | current | Battery works in unbalance state. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm … | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.46 | NotificationhwBattUnbalanceAlarmResumeTraps | current | Battery unbalance alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm po… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.47 | NotificationhwAcFreqFaultAlarmTraps | current | AC frequency is fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descri… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.48 | NotificationhwAcFreqFaultAlarmResumeTraps | current | AC frequency alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port de… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.49 | NotificationhwXmuSelfFaultAlarmTraps | current | There are some fault in XMU itself. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alar… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.50 | NotificationhwXmuSelfFaultAlarmResumeTraps | current | XMU fault alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.51 | NotificationhwRs485CommAlarmTraps | current | RS485 communication of monitors disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descripti… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.52 | NotificationhwRs485CommAlarmResumeTraps | current | RS485 communication alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm … | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.53 | NotificationhwNetCommAlarmTraps | current | Network communication of monitors disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.54 | NotificationhwNetCommAlarmResumeTraps | current | Network communication alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alar… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.55 | NotificationhwAcOffLongTimeAlarmTraps | current | AC power off for a long time alarms happened. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.56 | NotificationhwAcOffLongTimeAlarmResumeTraps | current | AC power off for a long time alarms resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single descripti… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.57 | NotificationhwSpdAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.58 | NotificationhwSpdAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.59 | NotificationhwBadBatteryTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.60 | NotificationhwBadBatteryResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.61 | NotificationhwLvd2DisconnectingTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.62 | NotificationhwLvd2DisconnectingResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.63 | NotificationhwBattHighTempTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.64 | NotificationhwBattHighTempResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.65 | NotificationhwBattLowTempTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.66 | NotificationhwBattLowTempResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.67 | NotificationhwDcUltraOverVoltageTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.68 | NotificationhwDcUltraOverVoltageResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.69 | NotificationhwDcUltraUnderVoltageTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.70 | NotificationhwDcUltraUnderVoltageResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.71 | NotificationhwUmiCommFailTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.72 | NotificationhwUmiCommFailResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.73 | NotificationhwShortTestFailTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.74 | NotificationhwShortTestFailResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.75 | NotificationhwMissingBattTempSensorTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.76 | NotificationhwMissingBattTempSensorResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.77 | NotificationhwBattTempSensorFaultTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.78 | NotificationhwBattTempSensorFaultResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.79 | NotificationhwAcOverVoltageTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.80 | NotificationhwAcOverVoltageResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.81 | NotificationhwAcUnderVoltageTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.82 | NotificationhwAcUnderVoltageResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.83 | NotificationhwTcuFanAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.84 | NotificationhwTcuFanAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.85 | NotificationhwTcuDcAirAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.86 | NotificationhwTcuDcAirAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.87 | NotificationhwTripBreakAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.88 | NotificationhwTripBreakAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.89 | NotificationhwTripBatteryCabinetAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.90 | NotificationhwTripBattCabAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.103 | NotificationhwBattTestAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.104 | NotificationhwBattTestAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.105 | NotificationhwBattContactorFaultTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.106 | NotificationhwBattContactorFaultResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.107 | NotificationhwBattFuseBreakAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.108 | NotificationhwBattFuseBreakAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.109 | NotificationhwDCDAbnormalAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.110 | NotificationhwDCDAbnormalAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.111 | NotificationhwACDAbnormalAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.112 | NotificationhwACDAbnormalAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.113 | NotificationhwLoadOverCurrentAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.114 | NotificationhwLoadOverCurrentAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.115 | NotificationhwEOSNoResponseAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.116 | NotificationhwEOSNoResponseAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.117 | NotificationhwEOSOverLoadAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.118 | NotificationhwEOSOverLoadAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.119 | NotificationhwInverterAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.120 | NotificationhwInveterAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.121 | NotificationhwDGAlarmTraps | current | DG Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm … | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.122 | NotificationhwDGAlarmResumeTraps | current | DG Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.123 | NotificationhwSSUSummaryAlarmTraps | current | SSU Group Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.124 | NotificationhwSSUSummaryAlarmResumeTraps | current | SSU Group Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.125 | NotificationhwSSUAlarmTraps | current | SSU Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.126 | NotificationhwSSUAlarmResumeTraps | current | SSU Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.127 | NotificationhwTemp1SensorAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.128 | NotificationhwTemp1SensorAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.129 | NotificationhwTemp2SensorAlarmTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.130 | NotificationhwTemp2SensorAlarmResumeTraps | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.131 | NotificationhwRectCapacityAlarmTraps | current | Low Rectifier Capacity or High Rectifier Capacity Alarm happened. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.132 | NotificationhwRectCapacityAlarmResumeTraps | current | Low Rectifier Capacity or High Rectifier Capacity Alarm Resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.133 | NotificationhwTcucTempSensorFaultAlarmTraps | current | The TCUC cabient temperature sensor fault alarm happened. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.134 | NotificationhwTcucTempSensorFaultAlarmResumeTraps | current | The TCUC cabient temperature sensor fault alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.135 | NotificationhwTcucFanFaultAlarmTraps | current | The TCUC cabient fan fault alarm happened. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.136 | NotificationhwTcucFanFaultAlarmResumeTraps | current | The TCUC cabient fan fault alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.137 | NotificationhwTcucTempAbnormalAlarmTraps | current | The TCUC cabinet temperature is too high or too low | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.138 | NotificationhwTcucTempAbnormalAlarmResumeTraps | current | The TCUC cabinet temperature abnormal alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.139 | NotificationhwTcucDoorOpenAlarmTraps | current | The TCUC cabinet door is open. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.140 | NotificationhwTcucDoorOpenAlarmResumeTraps | current | The TCUC cabient door open alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.141 | NotificationhwTcucSmokeAlarmTraps | current | The TCUC cabient smoke alarm happened. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.142 | NotificationhwTcucSmokeAlarmResumeTraps | current | The TCUC cabient smoke alarm resumed | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.143 | NotificationhwTcucWaterAlarmTraps | current | The TCUC cabient water alarm happend. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.144 | NotificationhwTcucWaterAlarmResumeTraps | current | The TCUC cabient water alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.145 | NotificationhwTcucCommFailAlarmTraps | current | The TCUC cabient failed communicate with the monitor. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.146 | NotificationhwTcucCommFailAlarmResumeTraps | current | The TCUC cabient communication fail alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.147 | NotificationhwEsduDigitalInputAlarmTraps | current | The ESDU Spare digital fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.148 | NotificationhwEsduDigitalInputAlarmResumeTraps | current | The ESDU Spare digital alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alar… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.149 | NotificationhwEsduDoorOpenAlarmTraps | current | The ESDU door is open. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.150 | NotificationhwEsduDoorOpenAlarmResumeTraps | current | The ESDU door open alarm resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.151 | NotificationhwEsduTemp1SensorFaultAlarmTraps | current | The ESDU TEMP1 sensor is faulty. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.152 | NotificationhwEsduTemp1SensorFaultAlarmResumeTraps | current | The ESDU TEMP1 sensor fault alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.153 | NotificationhwEsduTemp1SensorMissAlarmTraps | current | The ESDU TEMP1 sensor is missing. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.154 | NotificationhwEsduTemp1SensorMissAlarmResumeTraps | current | The ESDU TEMP1 sensor missing alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.155 | NotificationhwEsduTemp2SensorFaultAlarmTraps | current | The ESDU TEMP2 sensor is faulty. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.156 | NotificationhwEsduTemp2SensorFaultAlarmResumeTraps | current | The ESDU TEMP2 sensor fault alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.157 | NotificationhwEsduTemp2SensorMissAlarmTraps | current | The ESDU TEMP2 sensor is missing. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.158 | NotificationhwEsduTemp2SensorMissAlarmResumeTraps | current | The ESDU TEMP2 sensor missing alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.159 | NotificationhwEsduBtempSensorFaultAlarmTraps | current | The ESDU BTEMP sensor is faulty. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.160 | NotificationhwEsduBtempSensorFaultAlarmResumeTraps | current | The ESDU BTEMP sensor fault alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.161 | NotificationhwEsduBtempSensorMissAlarmTraps | current | The ESDU BTEMP sensor is missing. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.162 | NotificationhwEsduBtempSensorMissAlarmResumeTraps | current | The ESDU BTEMP sensor missing alarm recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.163 | NotificationhwEsduTemp1AlarmTraps | current | The ESDU TEMP1 temperature is out of range��too high or too low��. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.164 | NotificationhwEsduTemp1AlarmResumeTraps | current | The ESDU TEMP1 temperature alarm resume. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.165 | NotificationhwEsduTemp2AlarmTraps | current | The ESDU TEMP2 temperature is out of range��too high or too low��. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.166 | NotificationhwEsduTemp2AlarmResumeTraps | current | The ESDU TEMP2 temperature alarm resume. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.167 | NotificationhwEsduCommAlarmTraps | current | The Moniter cannot commuicate with the ESDU. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.168 | NotificationhwEsduCommAlarmResumeTraps | current | The communication between monitor and ESDU recovers. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.169 | NotificationhwBatteryLowCapacityAlarmTraps | current | The capacity of batteries is low. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.170 | NotificationhwBatteryLowCapacityAlarmResumeTraps | current | The alarm of low capacity resumed. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.171 | NotificationhwBatteryLostAlarmTraps | current | Some battery strings could be lost, when the alarm happened. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.172 | NotificationhwBatteryLostAlarmResumeTraps | current | If all the battery strings can be detected, the alarm of battery losting resume. | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.181 | NotificationhwPvLostAlarmTraps | current | ||
| 1.3.6.1.4.1.2011.6.164.2.1.0.182 | NotificationhwPvLostAlarmResumeTraps | current | ||
| 1.3.6.1.4.1.2011.6.164.2.1.0.187 | NotificationhwAtsAlarmTrap | current | ATS Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm… | |
| 1.3.6.1.4.1.2011.6.164.2.1.0.188 | NotificationhwAtsAlarmResumeTrap | current | ATS Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description… | |
| 1.3.6.1.4.1.2011.6.164.2.1.2 | NodehwAcbGroupAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.2.0 | NodehwAcbGroupAlmTrapTablePrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.2.0.99 | NotificationhwAcbGroupAlarmTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.2.0.100 | NotificationhwAcbGroupAarlmResumeTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.3 | NodehwAcbAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.3.0 | NodehwAcbAlmTrapTablePrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.3.0.99 | NotificationhwAcbAlarmTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.3.0.100 | NotificationhwAcbAarlmResumeTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.4 | NodehwInverterTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.4.0 | NodehwInverterTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.1 | NotificationhwInverterCommFailAlarmTrap | current | Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.2 | NotificationhwInverterCommFailAlarmResumeTrap | current | Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.3 | NotificationhwInverterFanFaultAlarmTrap | current | Fan Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site desc… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.4 | NotificationhwInverterFanFaultAlarmResumeTrap | current | Fan Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Si… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.5 | NotificationhwInverterACOutLowAlarmTrap | current | AC Output Undervoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.6 | NotificationhwInverterACOutLowAlarmResumeTrap | current | AC Output Undervoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.7 | NotificationhwInverterACOutHighAlarmTrap | current | AC Output Overvoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.8 | NotificationhwInverterACOutHighAlarmResumeTrap | current | AC Output Overvoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.9 | NotificationhwInverterModFaultAlarmTrap | current | Module Fault. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site des… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.10 | NotificationhwInverterModFaultAlarmResumeTrap | current | Module Fault Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, S… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.11 | NotificationhwInverterModTempHighAlarmTrap | current | Temperature Too High. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.12 | NotificationhwInverterModTempHighAlarmResumeTrap | current | Temperature Too High Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.13 | NotificationhwInverterModTempLowAlarmTrap | current | Temperature Too Low. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, S… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.14 | NotificationhwInverterModTempLowAlarmResumeTrap | current | Temperature Too Low Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, N… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.15 | NotificationhwInvertersACPhaseShortAlarmTrap | current | AC Input Phase Not Ready. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.16 | NotificationhwInvertersACPhaseShortAlarmResumeTrap | current | AC Input Phase Not Ready Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant addre… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.17 | NotificationhwInverterModOffAlarmTrap | current | Module Off. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.18 | NotificationhwInverterModOffAlarmResumeTrap | current | Module Off Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Sit… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.19 | NotificationhwInverterACInAbnAlarmTrap | current | AC Input Abnormal. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Sit… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.20 | NotificationhwInverterACInAbnAlarmResumeTrap | current | AC Input Abnormal Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.21 | NotificationhwInverterDCInLowAlarmTrap | current | DC Input Undervoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.22 | NotificationhwInverteDCInLowAlarmResumeTrap | current | DC Input Undervoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.23 | NotificationhwInverterDCInHighAlarmTrap | current | DC Input Overvoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.24 | NotificationhwInverterDCInHighAlarmResumeTrap | current | DC Input Overvoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.25 | NotificationhwInverterModCommFailAlarmTrap | current | Module Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.26 | NotificationhwInverterModCommFailAlarmResumeTrap | current | Module Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant a… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.27 | NotificationhwInverterNoACInAlarmTrap | current | No AC In. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.28 | NotificationhwInverterNoACInAlarmResumeTrap | current | No AC In Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.29 | NotificationhwInverterNoDCInAlarmTrap | current | No DC In. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.30 | NotificationhwInverterNoDCInAlarmResumeTrap | current | No DC In Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site … | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.31 | NotificationhwInverterT2SFaultAlarmTrap | current | T2S Fault. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site descri… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.32 | NotificationhwInverterT2SFaultAlarmResumeTrap | current | T2S Fault Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.33 | NotificationhwInvertModMissAlarmTrap | current | Missing Module. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site d… | |
| 1.3.6.1.4.1.2011.6.164.2.1.4.0.34 | NotificationhwInvertModMissAlarmResumeTrap | current | Missing Module Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID,… | |
| 1.3.6.1.4.1.2011.6.164.2.1.6 | NodehwIboxAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.6.0 | NodehwIboxAlmTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.6.0.1 | NotificationhwIboxCommFailAlarmTrap | current | Ibox Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, N… | |
| 1.3.6.1.4.1.2011.6.164.2.1.6.0.2 | NotificationhwIboxCommFailAlarmResumeTrap | current | Ibox Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant add… | |
| 1.3.6.1.4.1.2011.6.164.2.1.7 | NodehwIbatAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.7.0 | NodehwIbatAlmTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.7.0.1 | NotificationhwIbatAlarmTrap | current | Ibat Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, N… | |
| 1.3.6.1.4.1.2011.6.164.2.1.7.0.2 | NotificationhwIbatAlarmResumeTrap | current | Ibat Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant add… | |
| 1.3.6.1.4.1.2011.6.164.2.1.8 | NodehwAcAmmeterAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.8.0 | NodehwAcAmmeterAlmTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.8.0.1 | NotificationhwAcAmmeterAlarmTrap | current | Ac Ammeter. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site descr… | |
| 1.3.6.1.4.1.2011.6.164.2.1.8.0.2 | NotificationhwAcAmmeterAlarmResumeTrap | current | Ac Ammeter . Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site desc… | |
| 1.3.6.1.4.1.2011.6.164.2.1.9 | NodehwCommExBoardAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.9.0 | NodehwCommExBoardAlmTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.9.0.1 | NotificationhwCommExBoardCommFailAlarmTrap | current | Communication Expansion Board Communication Failure Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site… | |
| 1.3.6.1.4.1.2011.6.164.2.1.9.0.2 | NotificationhwCommExBoardCommFailAlarmResumeTrap | current | Communication Expansion Board Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site na… | |
| 1.3.6.1.4.1.2011.6.164.2.1.10 | NodehwDGCommExBoardAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.10.0 | NodehwDGCommExBoardAlmTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.10.0.1 | NotificationhwDGCommExBoardCommFailAlarmTrap | current | DG Comm Ex Board Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administran… | |
| 1.3.6.1.4.1.2011.6.164.2.1.10.0.2 | NotificationhwDGCommExBoardCommFailAlarmResumeTrap | current | DG Comm Ex Board Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site admi… | |
| 1.3.6.1.4.1.2011.6.164.2.1.13 | NodehwElockAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.13.0 | NodehwElockAlmTrapTablePrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.13.0.1 | NotificationhwElockAlarmTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.13.0.2 | NotificationhwElockAlarmResumeTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.14 | NodehwTemHumAlmTrapTable | |||
| 1.3.6.1.4.1.2011.6.164.2.1.14.0 | NodehwTemHumAlmTrapTablePrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.1.14.0.1 | NotificationhwTemHumAlarmTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.1.14.0.2 | NotificationhwTemHumAlarmResumeTrap | current | / | |
| 1.3.6.1.4.1.2011.6.164.2.2 | NodehwSiteDevicesTraps | |||
| 1.3.6.1.4.1.2011.6.164.2.2.0 | NodehwDevicesTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.2.0.1 | NotificationhwRectifiersInslotChange | current | When the presence status of a rectifier changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or from hwRectConfigTable o… | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.2 | NotificationhwBatterysInslotChange | current | When the presence status of a battery string changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or from hwBatttConfigT… | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.3 | NotificationhwBattTestRecordsAdd | current | After a new discharge test is conducted on a battery group, the node reports an event. The bound information includes the site address, site name, site descrip… | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.4 | NotificationhwEnvTempSensInslotChange | current | When the presence status of an environment temperature sensor changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or fr… | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.5 | NotificationhwEnvHumiSensInslotChange | current | When the presence status of an environment humidity sensor changes, the trap reports an event. Then the NMS adds or deletes the corresponding entry to or from … | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.6 | NotificationhwPDEsInslotChange | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.2.0.7 | NotificationhwInvertersInslotChange | current | Description. | |
| 1.3.6.1.4.1.2011.6.164.2.3 | NodehwSiteStatusTrap | |||
| 1.3.6.1.4.1.2011.6.164.2.3.0 | NodehwSiteStatusTrapPrefix | |||
| 1.3.6.1.4.1.2011.6.164.2.3.0.1 | NotificationhwAcInputFaultTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.2 | NotificationhwRectifierFaultTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.3 | NotificationhwBatteryDischargeTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.4 | NotificationhwBatteryLowVoltageTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.5 | NotificationhwBatteryUltraLowVoltageTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.6 | NotificationhwBatteryDisconnectTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.7 | NotificationhwFuseBrokenTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.8 | NotificationhwLowRecitiferCapacityTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.9 | NotificationhwBatteryTestNegativeTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.10 | NotificationhwUrgentAlarmTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.2.3.0.11 | NotificationhwNonurgentAlarmTrap | current | ||
| 1.3.6.1.4.1.2011.6.164.3 | NodehwSiteEquip | |||
| 1.3.6.1.4.1.2011.6.164.3.1 | TablehwSiteCameraTable | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.3.1.1 | RowhwSiteCameraEntry | not-accessible | current | / |
| 1.3.6.1.4.1.2011.6.164.3.1.1.1 | ColumnhwSiteCameraIp | read-only | current | the camera ip adress. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.2 | ColumnhwSiteCameraPort | read-only | current | camera connect port number. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.5 | ColumnhwSiteCameraPhotSetAlarmType | read-write | current | You can set the alarm type to obtain the historical picture of the camera-related alarm shooting. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.6 | ColumnhwSiteCameraAssociatedAlarmPicture1 | read-only | current | Associated alarm picture 1. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.7 | ColumnhwSiteCameraAssociatedAlarmPicture2 | read-only | current | Associated alarm picture 2. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.8 | ColumnhwSiteCameraAssociatedAlarmPicture3 | read-only | current | Associated alarm picture 3. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.9 | ColumnhwSiteCameraAssociatedAlarmPicture4 | read-only | current | Associated alarm picture 4. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.10 | ColumnhwSiteCameraAssociatedAlarmPicture5 | read-only | current | Associated alarm picture 5. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.11 | ColumnhwSiteCameraAssociatedAlarmPicture6 | read-only | current | Associated alarm picture 6. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.12 | ColumnhwSiteCameraAssociatedAlarmPicture7 | read-only | current | Associated alarm picture 7. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.13 | ColumnhwSiteCameraAssociatedAlarmPicture8 | read-only | current | Associated alarm picture 8. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.14 | ColumnhwSiteCameraAssociatedAlarmPicture9 | read-only | current | Associated alarm picture 9. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.15 | ColumnhwSiteCameraAssociatedAlarmPicture10 | read-only | current | Associated alarm picture 10. |
| 1.3.6.1.4.1.2011.6.164.3.1.1.16 | ColumnhwSiteCameraAdditionalAssociatedAlarmPictures | read-only | current | Additional associated alarm pictures. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (8..11)) | current | Description. |
| DisplayString | OCTET STRING (SIZE (1..64)) | current | Description. |
| MeasuresRange | Integer32 | current | Description. |
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | current | Description. |
| RunStatus | INTEGER { unknow(1), normal(2), alarm(3) } | current | This integer value represents running status of the system. Depending on situation there may be limits on allowed values. Operational values: (1) unknown - status has not yet been defined (2) normal - there are no activ… |
| TruthValue | INTEGER { true(1), false(2) } | current | Description. |