EMPIRE
734 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.546 | Nodeempire | |||
| 1.3.6.1.4.1.546.1 | Nodeunix | |||
| 1.3.6.1.4.1.546.1.1 | Nodesysmgmt | |||
| 1.3.6.1.4.1.546.1.1.1 | NodemonitorTrap | A Monitor event has occurred. Recall a monitor event occurs when a Monitor Table row expression evaluates to true. The expression is: 'monCurrVal monOperator m… | ||
| 1.3.6.1.4.1.546.1.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.546.1.1.1.1 | Scalarnodename | read-only | mandatory | The name of the system that the agent is running on as given by the login prompt. |
| 1.3.6.1.4.1.546.1.1.1.2 | Scalarcpu | read-only | mandatory | The CPU type of the system that the agent is running on (e.g. sun4c, sun4m). |
| 1.3.6.1.4.1.546.1.1.1.3 | Scalarmemory | read-only | mandatory | The amount of memory in 1024 byte units contained in the system. |
| 1.3.6.1.4.1.546.1.1.1.4 | Scalarhostid | read-only | mandatory | The hostid number that resides on the mother board of the system that the agent is running on. The hostid is unique across all machines manufactured by the sam… |
| 1.3.6.1.4.1.546.1.1.1.5 | Scalarosver | read-only | mandatory | The operating system version of the system that the agent resides (e.g. 7). Each time a new kernel is re-linked for a given kernel configuration file, this num… |
| 1.3.6.1.4.1.546.1.1.1.6 | Scalarosrel | read-only | mandatory | The operating system release of the system that the agent resides (e.g. 4.1.3). |
| 1.3.6.1.4.1.546.1.1.1.7 | TabledevTable | not-accessible | mandatory | This table describes all mounted file systems on the system that the agent resides. |
| 1.3.6.1.4.1.546.1.1.1.7.1 | RowdevTableEntry | not-accessible | mandatory | An entry in the device table. |
| 1.3.6.1.4.1.546.1.1.1.7.1.1 | ColumndevIndex | read-only | mandatory | This object does not describe the mounted device. Its sole purpose is to indicate the row instance. The instance is derived from the index number from the moun… |
| 1.3.6.1.4.1.546.1.1.1.7.1.2 | ColumndevDevice | read-only | mandatory | The device name (e.g. /dev/sd0a) corresponding to the mounted file system. For example, the '/' file system is commonly mounted from the device '/dev/sd0a'. Fo… |
| 1.3.6.1.4.1.546.1.1.1.7.1.3 | ColumndevMntPt | read-only | mandatory | The mount point or path name in the local file system where the device is mounted (e.g. /home). |
| 1.3.6.1.4.1.546.1.1.1.7.1.4 | ColumndevBsize | read-only | mandatory | The block size of the mounted device in bytes. File systems and disk devices generally allocate data in fixed size 'blocks' generally referred to as the device… |
| 1.3.6.1.4.1.546.1.1.1.7.1.5 | ColumndevTblks | read-only | mandatory | The total number of blocks contained in the mounted device. |
| 1.3.6.1.4.1.546.1.1.1.7.1.6 | ColumndevFblks | read-only | mandatory | The total number of free or unallocated blocks in the mounted device. |
| 1.3.6.1.4.1.546.1.1.1.7.1.7 | ColumndevTfiles | read-only | mandatory | Each disk device and file system allocates a fixed, maximum number of files that can be written to the device. The value of this object indicates the maximum n… |
| 1.3.6.1.4.1.546.1.1.1.7.1.8 | ColumndevFfiles | read-only | mandatory | The number of free or unallocated files that can be created on this device. |
| 1.3.6.1.4.1.546.1.1.1.7.1.9 | ColumndevMaxNameLen | read-only | mandatory | The maximum file name length that this mounted device supports. If no fixed limit exists, 0 is returned. |
| 1.3.6.1.4.1.546.1.1.1.7.1.10 | ColumndevType | read-only | mandatory | The type of the mounted device. If this underlying device does not support feature, 0 is returned. |
| 1.3.6.1.4.1.546.1.1.1.7.1.11 | ColumndevFsid | read-only | mandatory | The (possibly unique) file system ID of the mounted device. V.4 systems support its uniqueness while SunOS does not. For devices or operating systems not suppo… |
| 1.3.6.1.4.1.546.1.1.1.7.1.12 | ColumndevFstr | read-only | mandatory | Some devices support a description string. If supported by the underlying device and operating system, that device specific description string is returned. If … |
| 1.3.6.1.4.1.546.1.1.1.7.1.13 | ColumndevUnmount | read-write | mandatory | Writing a delete(1) to this object causes the agent to unmount this device and remove its entry from the mounted file system table. Writing any other value to … |
| 1.3.6.1.4.1.546.1.1.1.7.1.14 | ColumndevCapacity | read-only | mandatory | The percentage of the device's total capacity in use. |
| 1.3.6.1.4.1.546.1.1.1.7.1.15 | ColumndevInodeCapacity | read-only | mandatory | The percentage of the device's total file capacity (inodes) in use. File systems often place an upper bound on the number of files that can be created on a fil… |
| 1.3.6.1.4.1.546.1.1.1.8 | ScalaragentVersion | read-only | mandatory | The agent's description and software version number (e.g 'Concord . . . Ver 4.1'). |
| 1.3.6.1.4.1.546.1.1.1.9 | NodekernelConfig | |||
| 1.3.6.1.4.1.546.1.1.1.9.1 | ScalarmaxProcs | read-only | mandatory | Maximum number of slots in the system process table or simply, the maximum number of processes that may run at any one time on the system. |
| 1.3.6.1.4.1.546.1.1.1.9.2 | ScalarserialNumber | read-only | mandatory | The system's serial number. This number is different from the system's hostid value; it should be unique across all platforms manufactured by the same vendor. |
| 1.3.6.1.4.1.546.1.1.1.9.3 | ScalarromVersion | read-only | mandatory | The system's ROM version number (e.g 2.6). Different versions of ROM often support different commands and options. Knowing the system's ROM version number is o… |
| 1.3.6.1.4.1.546.1.1.1.9.4 | ScalarnumCPU | read-only | mandatory | The number of CPUs contained within this host. |
| 1.3.6.1.4.1.546.1.1.1.9.5 | ScalarclockHZ | read-only | mandatory | The system's clock or 'tick' rate in HZ. This is the rate at operating system is given regularly, periodic interrupts in order to handle I/O, schedule processe… |
| 1.3.6.1.4.1.546.1.1.1.9.6 | ScalarkernelVers | read-only | mandatory | The kernel version; This description string is compiled into the kernel at kernel build time and is generally used to convey information about its functionalit… |
| 1.3.6.1.4.1.546.1.1.1.9.7 | ScalarvirtualMem | read-only | mandatory | The amount of virtual memory in 1024 byte units (KBytes). |
| 1.3.6.1.4.1.546.1.1.1.9.8 | ScalarmaxInode | read-only | mandatory | Maximum number of in core file inodes allocated by this host. An inode is a data structure used by a file system to describe a file. Part of it is cached in me… |
| 1.3.6.1.4.1.546.1.1.1.9.9 | ScalarmaxFiles | read-only | mandatory | Maximum number of open files the system can support at any one time. The kernel pre-allocates, at kernel boot time, a table of structures for file I/O. If the … |
| 1.3.6.1.4.1.546.1.1.1.9.10 | ScalarmaxClist | read-only | mandatory | The maximum number of 'clist' structures allocated by the kernel. Line disciplines, like terminals, manipulate data on 'clists' which are essentially linked-li… |
| 1.3.6.1.4.1.546.1.1.1.9.11 | ScalarmaxMemPerProc | read-only | mandatory | Maximum memory per process in KBytes. Operating systems often set an upper limit on the amount of memory a process may use. If the underlying operating system … |
| 1.3.6.1.4.1.546.1.1.1.9.12 | ScalartotalSwap | read-only | mandatory | Total system swap space in KBytes. Swap is a region on secondary storage (primarily disks) that is used for swapping and paging. Swapping is a memory managemen… |
| 1.3.6.1.4.1.546.1.1.1.9.13 | ScalaropenMaxPerProc | read-only | mandatory | Maximum number of open files per process. Each process is generally given a limit on the maximum number of files it may have open at any one time. If the opera… |
| 1.3.6.1.4.1.546.1.1.1.9.14 | ScalarposixJobCtrl | read-only | mandatory | Boolean variable indicating if Posix Job Control supported. POSIX, an IEEE standard, defines a portable, open interface to operating systems. Part of the speci… |
| 1.3.6.1.4.1.546.1.1.1.9.15 | ScalarposixVersion | read-only | mandatory | The POSIX version number supported by host operating system. As new versions of POSIX are released, it may be important to monitor which host supports which ve… |
| 1.3.6.1.4.1.546.1.1.1.9.16 | ScalarpageSize | read-only | mandatory | This object returns the number of bytes in a page; a 'page' is the fixed size unit of measurement when dealing with both virtual and physical memory. Page gran… |
| 1.3.6.1.4.1.546.1.1.1.9.17 | ScalarwordSize | read-only | mandatory | This object returns the kernel word size. For example, if Solaris is booted with a 64 bit kernel, this object would return 64. If Solaris is booted with a 32 b… |
| 1.3.6.1.4.1.546.1.1.1.10 | Nodebootconf | |||
| 1.3.6.1.4.1.546.1.1.1.10.1 | ScalarrootName | read-only | mandatory | The Device and partition (e.g. sd0a) that the root filesystem is mounted from. |
| 1.3.6.1.4.1.546.1.1.1.10.2 | ScalarrootFSType | read-only | mandatory | The root filesystem type (e.g. 4.2). |
| 1.3.6.1.4.1.546.1.1.1.10.3 | ScalarrootBlocks | read-only | mandatory | The total number of blocks contained in the root filesystem. The value 0 is returned if unknown. |
| 1.3.6.1.4.1.546.1.1.1.10.4 | ScalardumpName | read-only | mandatory | The device and partition (e.g. sd0b) that the dump filesystem is mounted from. 'Dump' is a area of secondary storage reserved by the operating system so that i… |
| 1.3.6.1.4.1.546.1.1.1.10.5 | ScalardumpFSType | read-only | mandatory | The dump filesystem type (e.g. spec). Dump is generally not a 'normal' file system like UFS, 4.2, etc. |
| 1.3.6.1.4.1.546.1.1.1.10.6 | ScalardumpBlocks | read-only | mandatory | The total number of blocks contained in the dump filesystem. |
| 1.3.6.1.4.1.546.1.1.1.10.7 | ScalarswapName | read-only | mandatory | The device and partition (e.g. sd0b) that serves as swap space for the running kernel. |
| 1.3.6.1.4.1.546.1.1.1.10.8 | ScalarswapFSType | read-only | mandatory | The swap filesystem type (e.g. spec). Swap space is not generally a typical file system like UFS, 4.2, etc. |
| 1.3.6.1.4.1.546.1.1.1.10.9 | ScalarswapSize | read-only | mandatory | The total number of blocks contained in the kernel's swap area. |
| 1.3.6.1.4.1.546.1.1.1.11 | Nodestreams | |||
| 1.3.6.1.4.1.546.1.1.1.11.1 | ScalarmaxmsgSize | read-only | mandatory | The maximum Streams message size in bytes. Streams often places a limit on the size of an individual message. If the underlying system does not place such a li… |
| 1.3.6.1.4.1.546.1.1.1.11.2 | ScalarmaxNumPush | read-only | mandatory | Maximum number of Streams modules that may be 'pushed' onto an individual stream at any one time. If the underlying system does not define such a limit, 0 is r… |
| 1.3.6.1.4.1.546.1.1.1.11.3 | ScalarnumMuxLinks | read-only | mandatory | Number of Streams multiplexor links. |
| 1.3.6.1.4.1.546.1.1.1.11.4 | ScalarstreamUse | read-only | mandatory | Current number of open 'streams' in the system. Operating systems often place a limit on the number of streams that may be in use at any one time. Monitoring t… |
| 1.3.6.1.4.1.546.1.1.1.11.5 | ScalarstreamMaxs | read-only | mandatory | The largest number of open 'streams' recorded by the system. This value represents a 'high-water' mark. |
| 1.3.6.1.4.1.546.1.1.1.11.6 | ScalarstreamFails | read-only | mandatory | The number of 'stream' allocation failures that have occurred. Monitoring the streamUse, streamMax, and streamFail variables can help determine if the Streams … |
| 1.3.6.1.4.1.546.1.1.1.11.7 | ScalarqueueUse | read-only | mandatory | Number of Streams queues currently in use by the system. Streams are composed of queues, one for each direction of data flow. The value of this variable indica… |
| 1.3.6.1.4.1.546.1.1.1.11.8 | ScalarqueueMaxs | read-only | mandatory | The largest number of open 'streams' recorded by the system. This value represents the 'high-water' mark. |
| 1.3.6.1.4.1.546.1.1.1.11.9 | ScalarqueueFails | read-only | mandatory | The number of Streams queue allocation failures. Monitoring the queueUse, queueMax, and queueFail variables can help determine if the Streams subsystem is prop… |
| 1.3.6.1.4.1.546.1.1.1.11.10 | ScalarmblockUse | read-only | mandatory | The number of Streams message blocks currently in use. Streams messages are composed of message-blocks in a linked-list. The value of this variable indicates h… |
| 1.3.6.1.4.1.546.1.1.1.11.11 | ScalarmblockMaxs | read-only | mandatory | The largest number of Streams message blocks in use at any one time. This value represents a 'high-water' mark. |
| 1.3.6.1.4.1.546.1.1.1.11.12 | ScalarmblockFails | read-only | mandatory | The number of Streams message block allocation failures. Monitoring the mblockUse, mblockMax, and mblockFail variables can help determine if the Streams subsys… |
| 1.3.6.1.4.1.546.1.1.1.11.13 | ScalardblockUse | read-only | mandatory | The number of Streams data blocks currently in use. Message data is stored in data-blocks; the value of this variable indicates how many of the data-blocks are… |
| 1.3.6.1.4.1.546.1.1.1.11.14 | ScalardblockMaxs | read-only | mandatory | The largest number of Streams data blocks in use at any one time. This value represents a 'high-water' mark. |
| 1.3.6.1.4.1.546.1.1.1.11.15 | ScalardblockFails | read-only | mandatory | The number of Streams data block allocation failures. Monitoring the dblockUse, dblockMax, and dblockFail variables can help determine if the Streams subsystem… |
| 1.3.6.1.4.1.546.1.1.1.12 | ScalarsystemType | read-only | mandatory | The underlying system (hardware/OS) type |
| 1.3.6.1.4.1.546.1.1.1.13 | ScalarsystemEdgeUptime | read-only | mandatory | The SystemEDGE agent's uptime. Use for uptime calculations with variables in the Concord MIB. This is the same value as returned by the uptime value in MIB2. H… |
| 1.3.6.1.4.1.546.1.1.1.14 | ScalarsysedgeLicenseString | read-only | mandatory | This object is used in conjunction Concord's auto-licensing and remote licensing facility starting in SystemEDGE 4.0. |
| 1.3.6.1.4.1.546.1.1.1.16 | ScalarsysedgeLicenseKey | read-write | mandatory | This object is used in conjunction Concord's auto-licensing and remote licensing facility starting in SystemEDGE 4.0. |
| 1.3.6.1.4.1.546.1.1.1.17 | ScalarsysedgeMode | read-only | mandatory | This object indicates if SystemEDGE is in full-mode or restricted-mode. Restricted-mode is entered, when SystemEDGE 4.0 and higher, fails to find a valid licen… |
| 1.3.6.1.4.1.546.1.1.1.18 | ScalarsystemTimeZone | read-only | mandatory | The timezone this system is in obtained via TZ environment variable (UNIX) or NT win32 call. If SystemEDGE is unable to determine the timezone, 'unknown' is re… |
| 1.3.6.1.4.1.546.1.1.1.19 | ScalarsysedgeAddressList | read-only | mandatory | The space-separated list of up to 5 past IP addresses that this system was configured for. This MIB object, when used with the addrChangeTrap, is useful to pol… |
| 1.3.6.1.4.1.546.1.1.1.20 | ScalarsysedgeFQDN | read-only | mandatory | The system's fully qualified domain name (FQDN); this MIB object is a duplicate of mib-2.system.sysName but is repeated here for platform consistency (e.g. NT … |
| 1.3.6.1.4.1.546.1.1.1.21 | ScalarsysedgeConfProfile | read-write | mandatory | A space-separated list of configuration profile names currently configured in SystemEDGE. Configuration profiles are managed by AdvantEDGE View; AdvantEDGE Vie… |
| 1.3.6.1.4.1.546.1.1.1.22 | ScalarsysedgeInstallDir | read-only | mandatory | The directory where the SystemEDGE distribution is installed (e.g. c:\sysedge or /opt/EMPsysedge). One can use this value to help configure actions, extensions… |
| 1.3.6.1.4.1.546.1.1.1.23 | ScalarsysedgePluginList | read-only | mandatory | A comma-separated list of plugins that are currently loaded into SystemEDGE. Management software can use this MIB object to determine installation and upgrade … |
| 1.3.6.1.4.1.546.1.1.2 | NodekernelErrorTrap | A kernel error event has occurred; on V.4 derived operating systems, the kernel relays errors and events via the system error device. See the Empire errorTable… | ||
| 1.3.6.1.4.1.546.1.1.2 | TableuserTable | not-accessible | mandatory | Table describing defined users of the node which the agent resides on. Normally, the list of valid users is stored in the /etc/passwd file; on systems which ru… |
| 1.3.6.1.4.1.546.1.1.2.1 | RowuserEntry | not-accessible | mandatory | An entry in the table describing defined users. |
| 1.3.6.1.4.1.546.1.1.2.1.1 | ColumnuserIndex | read-only | mandatory | The instance of the userEntry object, derived from its index number in the password file. |
| 1.3.6.1.4.1.546.1.1.2.1.2 | ColumnuserLoginID | read-only | mandatory | The user's login ID which is normally given to the system's login prompt (e.g. root). |
| 1.3.6.1.4.1.546.1.1.2.1.3 | ColumnuserPasswd | read-only | mandatory | The user's encrypted password. Users without passwords have an '*' in this field. |
| 1.3.6.1.4.1.546.1.1.2.1.4 | ColumnuserUID | read-only | mandatory | The user's User-ID or UID (e.g. 0). |
| 1.3.6.1.4.1.546.1.1.2.1.5 | ColumnuserGID | read-only | mandatory | The user's Group-ID or GID (e.g. 1). |
| 1.3.6.1.4.1.546.1.1.2.1.6 | ColumnuserName | read-only | mandatory | The user's real life name (e.g. John Doe). |
| 1.3.6.1.4.1.546.1.1.2.1.7 | ColumnuserHomeDir | read-only | mandatory | The user's home directory when that user logs in (e.g. /home/john). |
| 1.3.6.1.4.1.546.1.1.2.1.8 | ColumnuserShell | read-only | mandatory | The user's preferred shell (e.g. /bin/csh). |
| 1.3.6.1.4.1.546.1.1.3 | TablegroupTable | not-accessible | mandatory | Table describing defined groups on node that agent resides. Normally the list of valid user groups is stored in the file /etc/group. On systems running NIS or … |
| 1.3.6.1.4.1.546.1.1.3 | NodemonitorEntryNotReadyTrap | This trap is sent when a Monitor Table entry's monRowStatus is set to 'notReady(3)'. One reason this may occur is that the object-instance identifier being mon… | ||
| 1.3.6.1.4.1.546.1.1.3.1 | RowgroupEntry | not-accessible | mandatory | Entry in table describing valid groups. |
| 1.3.6.1.4.1.546.1.1.3.1.1 | ColumngroupIndex | read-only | mandatory | The instance of the groupEntry object, derived from its index in the groups file. |
| 1.3.6.1.4.1.546.1.1.3.1.2 | ColumngroupName | read-only | mandatory | The name of the group (e.g. wheel). |
| 1.3.6.1.4.1.546.1.1.3.1.3 | ColumngroupPasswd | read-only | mandatory | The encrypted password for the group. Groups without passwords have an '*' in this field. |
| 1.3.6.1.4.1.546.1.1.3.1.4 | ColumngroupGID | read-only | mandatory | The group-ID or GID (e.g. 1). |
| 1.3.6.1.4.1.546.1.1.4 | NodelogMonMatchTrap | This trap is sent when the log monitoring subsystem detects a match in a log file it is currently monitoring. Periodically, the agent stats each log file for c… | ||
| 1.3.6.1.4.1.546.1.1.4 | TableprocessTable | not-accessible | mandatory | Table describing currently running processes on the node which the SNMP agent resides. |
| 1.3.6.1.4.1.546.1.1.4.1 | RowprocessEntry | not-accessible | mandatory | Each entry in the process table represents a single running process. Because the SNMP standard does not allow tables to be indexed with the value 0, and becaus… |
| 1.3.6.1.4.1.546.1.1.4.1.1 | ColumnprocessID | read-only | mandatory | The unique process ID (e.g. 0). The value of this object also serves as the instance of the processEntry object. |
| 1.3.6.1.4.1.546.1.1.4.1.2 | ColumnprocessName | read-only | mandatory | The name of the running process (e.g. swapper). |
| 1.3.6.1.4.1.546.1.1.4.1.3 | ColumnprocessState | read-only | deprecated | The process state is operating system dependent. Possible states (for SunOS 4.1.3) include sleeping(1), waiting(2), running (3), idle (4), zombie (5), stopped(… |
| 1.3.6.1.4.1.546.1.1.4.1.4 | ColumnprocessNice | read-write | mandatory | The 'nice' value of the process which can be modified to give a process greater or lesser priority over other processes. The 'nice' value reflects the level of… |
| 1.3.6.1.4.1.546.1.1.4.1.5 | ColumnprocessFlags | read-only | mandatory | The process flags; flags are operating system dependent and are generally documented in system header files. |
| 1.3.6.1.4.1.546.1.1.4.1.6 | ColumnprocessUID | read-only | mandatory | The process owner's user ID (e.g. 0 for root). |
| 1.3.6.1.4.1.546.1.1.4.1.7 | ColumnprocessGID | read-only | mandatory | The process owner's group ID (e.g. 0 for wheel). |
| 1.3.6.1.4.1.546.1.1.4.1.8 | ColumnprocessKill | read-write | mandatory | This object represents a signal that can be sent to the running process. When accessed with GET or GetNext, a 0 is returned. When a valid signal value is writt… |
| 1.3.6.1.4.1.546.1.1.4.1.9 | ColumnprocessMEM | read-only | mandatory | The percentage (0-100) of real memory used by this process. |
| 1.3.6.1.4.1.546.1.1.4.1.10 | ColumnprocessSize | read-only | mandatory | The combined size of the text, data and stack segments in KBytes. Processes are normally broken into segments including those for text (or program), data, and … |
| 1.3.6.1.4.1.546.1.1.4.1.11 | ColumnprocessRSS | read-only | mandatory | Real memory (resident set) size of the process in kilobytes. This value indicates how many bytes are held by a process. |
| 1.3.6.1.4.1.546.1.1.4.1.12 | ColumnprocessTime | read-only | mandatory | This process' accumulated CPU time in seconds. |
| 1.3.6.1.4.1.546.1.1.4.1.13 | ColumnprocessParentPID | read-only | mandatory | This process' parent process ID (PID). |
| 1.3.6.1.4.1.546.1.1.4.1.14 | ColumnprocessNumThreads | read-only | mandatory | The number of threads executing within this process. Note, on some systems, the operating system may be un-aware of user-level threads executing within the pro… |
| 1.3.6.1.4.1.546.1.1.4.1.15 | ColumnprocessInBlks | read-only | mandatory | The number of blocks of data input by the process. |
| 1.3.6.1.4.1.546.1.1.4.1.16 | ColumnprocessOutBlks | read-only | mandatory | The number of blocks of data output by the process. |
| 1.3.6.1.4.1.546.1.1.4.1.17 | ColumnprocessMsgsSent | read-only | mandatory | The number of messages sent by the process. |
| 1.3.6.1.4.1.546.1.1.4.1.18 | ColumnprocessMsgsRecv | read-only | mandatory | The number of messages received by the process. |
| 1.3.6.1.4.1.546.1.1.4.1.19 | ColumnprocessSysCalls | read-only | mandatory | The number of system calls invoked by this process. |
| 1.3.6.1.4.1.546.1.1.4.1.20 | ColumnprocessMinorPgFlts | read-only | mandatory | The number of minor page faults incurred by this process. Minor faults do not require I/O to retrieve the page. |
| 1.3.6.1.4.1.546.1.1.4.1.21 | ColumnprocessMajorPgFlts | read-only | mandatory | The number of major page faults incurred by this process. Major faults require I/O to retrieve the page. |
| 1.3.6.1.4.1.546.1.1.4.1.22 | ColumnprocessNumSwaps | read-only | mandatory | The number of times this process has been swapped. |
| 1.3.6.1.4.1.546.1.1.4.1.23 | ColumnprocessVolCtx | read-only | mandatory | The number of voluntary context switches incurred by this process. Voluntary context switches occur when the processor 'voluntary' gives up the CPU (e.g. waiti… |
| 1.3.6.1.4.1.546.1.1.4.1.24 | ColumnprocessInvolCtx | read-only | mandatory | The number of involuntary context switches incurred by this process. An involuntary context switch occurs when the process has executed for the duration of its… |
| 1.3.6.1.4.1.546.1.1.4.1.25 | ColumnprocessArgs | read-only | mandatory | The parameters supplied to this process when it was initially started. |
| 1.3.6.1.4.1.546.1.1.4.1.26 | ColumnprocessStartTime | read-only | mandatory | The date/time at which this process started. The format is as follows: to local time in the form of a 26-character string as shown below. Time zone and dayligh… |
| 1.3.6.1.4.1.546.1.1.4.1.27 | ColumnprocessStateStr | read-only | mandatory | The process state in an operating-system independent format. A process-state matrix is included below. Note that not all operating systems may support a specif… |
| 1.3.6.1.4.1.546.1.1.4.1.28 | ColumnprocessStateInt | read-only | mandatory | The process state, as above, represented by integer for easier polling and trending. |
| 1.3.6.1.4.1.546.1.1.5 | NodelogMonNotReadyTrap | This trap is sent when the status of a log monitoring entry becomes 'notReady(3)'. An entry becomes 'notReady(3)' if an error occurs during log file scaning, i… | ||
| 1.3.6.1.4.1.546.1.1.5 | TablewhoTable | not-accessible | mandatory | This table represents users who are currently logged into the node which the agent resides. |
| 1.3.6.1.4.1.546.1.1.5.1 | RowwhoEntry | not-accessible | mandatory | An entry in the who table. |
| 1.3.6.1.4.1.546.1.1.5.1.1 | ColumnwhoIndex | read-only | mandatory | The instance of the whoEntry object. |
| 1.3.6.1.4.1.546.1.1.5.1.2 | ColumnwhoName | read-only | mandatory | The user name of a user logged into the node which the agent resides (e.g. root). |
| 1.3.6.1.4.1.546.1.1.5.1.3 | ColumnwhoDevice | read-only | mandatory | The device the user is using to log into the node which the agent resides (e.g. console or ttyp1). |
| 1.3.6.1.4.1.546.1.1.5.1.4 | ColumnwhoPID | read-only | mandatory | This object represents the process ID for the user's login shell. This object is not supported on SunOS 4.X systems; 0 is returned instead. |
| 1.3.6.1.4.1.546.1.1.5.1.5 | ColumnwhoTime | read-only | mandatory | The time, in SNMP TimeTicks, when the user first logged in. |
| 1.3.6.1.4.1.546.1.1.5.1.6 | ColumnwhoWhere | read-only | mandatory | The location the user logged in from if applicable. (e.g. :0.0 if local or host name if logged in from a remote system). |
| 1.3.6.1.4.1.546.1.1.6 | NoderemoteShell | |||
| 1.3.6.1.4.1.546.1.1.6.1 | ScalarshellOutput | read-write | mandatory | The name of a file that will receive all output from the execution of a UNIX command initiated by the agent. This file is restricted to the '/tmp' ('\temp' or … |
| 1.3.6.1.4.1.546.1.1.6.2 | ScalarshellCmd | read-write | mandatory | The command and arguments to be executed by the agent. When this object is SET, (and a valid shellOutput object exists), the agent fork/execs the command with … |
| 1.3.6.1.4.1.546.1.1.6.3 | ScalarshellExitStat | read-only | mandatory | The exit code from the execution of a shell command. The value remains unchanged until another command is executed. Each execution of a shell command overwrite… |
| 1.3.6.1.4.1.546.1.1.6.4 | ScalarshellOutputContents | read-only | mandatory | This object returns up to the first 512 characters of the last shell-command output stored in the file specified by shellOutput (remoteShell.1). No attempt at … |
| 1.3.6.1.4.1.546.1.1.7 | NodentEventMonMatchTrap | This trap is sent when the event log monitoring subsystem detects a match in a log it is currently monitoring. Periodically, the agent checks each event log fo… | ||
| 1.3.6.1.4.1.546.1.1.7 | Nodeperformance | |||
| 1.3.6.1.4.1.546.1.1.7.8 | Nodekernelperf | |||
| 1.3.6.1.4.1.546.1.1.7.8.4 | ScalarrunQLen | read-only | mandatory | The length of the scheduler's run queue sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel updates this param… |
| 1.3.6.1.4.1.546.1.1.7.8.5 | ScalardiskWaitNum | read-only | mandatory | The number of jobs that are waiting on disk I/O sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel updates th… |
| 1.3.6.1.4.1.546.1.1.7.8.6 | ScalarpageWaitNum | read-only | mandatory | The number of jobs that are waiting on page I/O sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel updates th… |
| 1.3.6.1.4.1.546.1.1.7.8.7 | ScalarswapActive | read-only | mandatory | The number of jobs that are active yet swapped out of memory, sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the ker… |
| 1.3.6.1.4.1.546.1.1.7.8.8 | ScalarsleepActive | read-only | mandatory | The number of jobs that are active yet sleeping in core, sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel u… |
| 1.3.6.1.4.1.546.1.1.7.8.9 | ScalarmemInUse | read-only | mandatory | The total real KBytes of memory in use sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel updates this parame… |
| 1.3.6.1.4.1.546.1.1.7.8.10 | ScalaractiveMem | read-only | mandatory | The total active real memory (KBytes) sampled over a fixed period of time. The sampling interval is system dependent. In SunOS, the kernel updates this paramet… |
| 1.3.6.1.4.1.546.1.1.7.8.11 | ScalarnumProcs | read-only | mandatory | The number of processes table slots currently allocated and in use. On older BSD-based systems, this metric is important since it places an uppder bound on the… |
| 1.3.6.1.4.1.546.1.1.7.8.12 | ScalarnumOpenFiles | read-only | mandatory | The system-wide total number of open files. |
| 1.3.6.1.4.1.546.1.1.7.8.13 | ScalarswapInUse | read-only | mandatory | The amount of swap space (KBytes) currently in use by the system. Swap space is used when memory is in short supply. Typically, entire processes are swapped ou… |
| 1.3.6.1.4.1.546.1.1.7.8.14 | ScalarnumSwitches | read-only | mandatory | The total number of context switches that have occurred since the kernel was last initialized. A context switch occurs each time a process gives up the CPU and… |
| 1.3.6.1.4.1.546.1.1.7.8.15 | ScalarnumTraps | read-only | mandatory | The total number of traps switching a process from user to kernel mode that have occurred since the kernel was last initialized. Traps are hardware exceptions … |
| 1.3.6.1.4.1.546.1.1.7.8.16 | ScalarnumSyscalls | read-only | mandatory | The total number of system calls that have occurred since the kernel was last initialized. System calls occur when a process calls a function which must execut… |
| 1.3.6.1.4.1.546.1.1.7.8.17 | ScalarnumInterrupts | read-only | mandatory | The total number of device interrupts that have occurred since the kernel was last initialized. The operating system is interrupted by devices and peripherals … |
| 1.3.6.1.4.1.546.1.1.7.8.18 | ScalarnumPageSwapIns | read-only | mandatory | The total number of pages that have been swapped in since the kernel was last initialized. Page swapping occurs when a process is swapped to and from secondary… |
| 1.3.6.1.4.1.546.1.1.7.8.19 | ScalarnumPageSwapOuts | read-only | mandatory | The total number of pages that have been swapped out since the kernel was last initialized. Page swapping occurs when a process is swapped to and from secondar… |
| 1.3.6.1.4.1.546.1.1.7.8.20 | ScalarnumSwapIns | read-only | mandatory | The total number of processes that have been swapped in since the kernel was last initialized. Processes are swapped to and from secondary storage when memory … |
| 1.3.6.1.4.1.546.1.1.7.8.21 | ScalarnumSwapOuts | read-only | mandatory | The total number of processes that have been swapped out since the kernel was last initialized. Processes are swapped to and from secondary storage when memory… |
| 1.3.6.1.4.1.546.1.1.7.8.22 | ScalarnumPageIns | read-only | mandatory | The total number of pages that have been paged in since the kernel was last initialized. Page-in is an operation performed by the virtual memory system in whic… |
| 1.3.6.1.4.1.546.1.1.7.8.23 | ScalarnumPageOuts | read-only | mandatory | The total number of pages that have been paged out since the kernel was last initialized. Page-out is an operation performed by the virtual memory system in wh… |
| 1.3.6.1.4.1.546.1.1.7.8.24 | ScalarnumPageReclaims | read-only | mandatory | The total pages that have been reclaimed from the freelist since the kernel was last initialized. Memory pages are stored on a free-list when not in use. If a … |
| 1.3.6.1.4.1.546.1.1.7.8.25 | ScalarnumPageFaults | read-only | mandatory | The total number of page faults that have occurred since the kernel was last initialized. A page fault occurs when a running process attempts to access a virtu… |
| 1.3.6.1.4.1.546.1.1.7.8.26 | ScalarloadAverage1Min | read-only | mandatory | The load average over the last 1 minute. The load average represents the average number of jobs in the run queue over the specified time range. The value repor… |
| 1.3.6.1.4.1.546.1.1.7.8.27 | ScalarloadAverage5Min | read-only | mandatory | The load average over the last 5 minutes. The load average represents the average number of jobs in the run queue over the specified time range. The value repo… |
| 1.3.6.1.4.1.546.1.1.7.8.28 | ScalarloadAverage15Min | read-only | mandatory | The load average over the last 15 minutes. The load average represents the average number of jobs in the run queue over the specified time range. The value rep… |
| 1.3.6.1.4.1.546.1.1.7.8.29 | ScalartotalSwapSpace | read-only | mandatory | Total system swap space in KBytes. This object is identical to the kernelConfig.totalSwap(12) object and is repeated here for the convenience of management sta… |
| 1.3.6.1.4.1.546.1.1.7.8.30 | ScalarswapCapacity | read-only | mandatory | The percentage of the system's total swap in use. The value of this object can be computed by dividing swapInUse(13) by totalSwapSpace(29) and multiplying by 1… |
| 1.3.6.1.4.1.546.1.1.7.8.31 | ScalarmemCapacity | read-only | mandatory | The percentage of the system's active memory in use. The value of this object can be approximated by dividing activeMem(10) by memory(system.3) and converting … |
| 1.3.6.1.4.1.546.1.1.7.8.32 | ScalarmemInUseCapacity | read-only | mandatory | The percentage of the system's memory in use. The value of this object can be approximated by dividing memInUse(9) by memory(system.3) and converting to a perc… |
| 1.3.6.1.4.1.546.1.1.7.8.33 | ScalarpageScans | read-only | mandatory | Total number of pages examined by pageout daemon. Excessive rates of scans (change in this counter) can indicate a machine with insufficient memory. |
| 1.3.6.1.4.1.546.1.1.7.8.34 | ScalarnumZombieProcs | read-only | mandatory | Current number of zombie processes found on the system. This MIB object is found by adding up all processes with a processStateStr of zombie. The lower the num… |
| 1.3.6.1.4.1.546.1.1.8 | TableerrorTable | not-accessible | deprecated | This table contains errors reported to the system console. On System V.4 platforms, it also contains errors passed up via the system error device. Note, errors… |
| 1.3.6.1.4.1.546.1.1.8 | NodentEventMonNotReadyTrap | This trap is sent when the status of an event log monitoring entry becomes 'notReady(3)'. An entry becomes 'notReady(3)' if an error occurs during log file sca… | ||
| 1.3.6.1.4.1.546.1.1.8.1 | RowerrorEntry | not-accessible | deprecated | An entry in the error table. |
| 1.3.6.1.4.1.546.1.1.8.1.1 | ColumnseqNum | read-only | deprecated | The unique sequence number of the error entry. The value of this object also represents the instance of the errorEntry object. |
| 1.3.6.1.4.1.546.1.1.8.1.2 | Columnmid | read-only | deprecated | The software module identifier reporting the error. |
| 1.3.6.1.4.1.546.1.1.8.1.3 | Columnsid | read-only | deprecated | The secondary identifier of the module reporting the error. |
| 1.3.6.1.4.1.546.1.1.8.1.4 | Columntime | read-only | deprecated | The time at which the error was reported and the error entry created. |
| 1.3.6.1.4.1.546.1.1.8.1.5 | Columntag | read-only | deprecated | A unique number which identifies the type of error that occurred. |
| 1.3.6.1.4.1.546.1.1.8.1.6 | Columntype | read-only | deprecated | The type of error. |
| 1.3.6.1.4.1.546.1.1.8.1.7 | Columncause | read-only | deprecated | The cause of the error. |
| 1.3.6.1.4.1.546.1.1.8.1.8 | Columnseverity | read-only | deprecated | The severity of the error. |
| 1.3.6.1.4.1.546.1.1.8.1.9 | Columnlevel | read-only | deprecated | The level of software reporting the error. |
| 1.3.6.1.4.1.546.1.1.8.1.10 | Columnmodule | read-only | deprecated | The module name that reported the error. |
| 1.3.6.1.4.1.546.1.1.8.1.11 | ColumnsubSysmsg | read-only | deprecated | The sub-system message of the error entry. |
| 1.3.6.1.4.1.546.1.1.8.1.12 | ColumnerrDelete | read-write | deprecated | Setting this object to the value 1 causes the agent to delete this entry from the error table. Writing any other value causes the agent to take no action. |
| 1.3.6.1.4.1.546.1.1.9 | Nodeipc | |||
| 1.3.6.1.4.1.546.1.1.9 | NodemonitorClearTrap | This Trap is sent when a Monitor Table entry transitions from True to False and has specified the monitor clearTrap flag. This Trap represents an indication th… | ||
| 1.3.6.1.4.1.546.1.1.9.1 | TablemsgqueTable | not-accessible | mandatory | This table contains an entry for each system SysV message queue currently in use. |
| 1.3.6.1.4.1.546.1.1.9.1.1 | RowmsgqueEntry | not-accessible | mandatory | An entry in the message queue table. |
| 1.3.6.1.4.1.546.1.1.9.1.1.1 | ColumnqueID | read-only | mandatory | The unique queue ID. The value of this object also represents the instance for the queEntry object. |
| 1.3.6.1.4.1.546.1.1.9.1.1.2 | ColumnqueKey | read-only | mandatory | The message queue key. Each message queue has a key value chosen by the creating user. Its value is only significant to the creating process. |
| 1.3.6.1.4.1.546.1.1.9.1.1.3 | ColumnqueMode | read-only | mandatory | The message queue permissions mode. The mode defines access permissions for the message queue as well as status information. See the man page ipcs(1) for more … |
| 1.3.6.1.4.1.546.1.1.9.1.1.4 | ColumnqueOwner | read-only | mandatory | The login name (e.g. root) of the owner of the message queue. |
| 1.3.6.1.4.1.546.1.1.9.1.1.5 | ColumnqueGroup | read-only | mandatory | The group name (e.g. wheel) of the owner of the message queue. |
| 1.3.6.1.4.1.546.1.1.9.1.1.6 | ColumnqueNBytes | read-only | mandatory | The number of bytes currently in the message queue. |
| 1.3.6.1.4.1.546.1.1.9.1.1.7 | ColumnqueNMesg | read-only | mandatory | The number of messages currently in the message queue. |
| 1.3.6.1.4.1.546.1.1.9.1.1.8 | ColumnqueDel | read-write | mandatory | Setting this object to the value 1 causes this agent to remove the message queue from its table. The message queue identifier is removed from the system-wide t… |
| 1.3.6.1.4.1.546.1.1.9.2 | TableshmemTable | not-accessible | mandatory | This table contains an entry for each system SysV shared memory segment currently in use. |
| 1.3.6.1.4.1.546.1.1.9.2.1 | RowshmemEntry | not-accessible | mandatory | An entry in the shared memory table. |
| 1.3.6.1.4.1.546.1.1.9.2.1.1 | ColumnshmemID | read-only | mandatory | The unique shared memory segment ID. The value of this object also represents the instance of the shmemEntry object. |
| 1.3.6.1.4.1.546.1.1.9.2.1.2 | ColumnshmemKey | read-only | mandatory | The shared memory segment key. Each shared memory segment is assigned a key value by the creating user. Its value is only significant to the creating process. |
| 1.3.6.1.4.1.546.1.1.9.2.1.3 | ColumnshmemMode | read-only | mandatory | The shared memory segment permissions mode. The mode defines access permissions for the message queue as well as status information. See the man page ipcs(1) f… |
| 1.3.6.1.4.1.546.1.1.9.2.1.4 | ColumnshmemOwner | read-only | mandatory | The user login name (e.g. root) of the owner of the shared memory segment. |
| 1.3.6.1.4.1.546.1.1.9.2.1.5 | ColumnshmemGroup | read-only | mandatory | The group name (e.g. wheel) of the owner of the shared memory segment. |
| 1.3.6.1.4.1.546.1.1.9.2.1.6 | ColumnshmemSegSz | read-only | mandatory | The size in bytes of the shared memory segment |
| 1.3.6.1.4.1.546.1.1.9.2.1.7 | ColumnshmemNLcks | read-only | mandatory | The number of times the shared memory segment has been locked. |
| 1.3.6.1.4.1.546.1.1.9.2.1.8 | ColumnshmemDel | read-write | mandatory | Setting this object to the value of 1 causes the agent to remove this entry from the table. The shared memory identifier is removed from the system-wide table … |
| 1.3.6.1.4.1.546.1.1.9.3 | TablesemTable | not-accessible | mandatory | This table contains an entry for each system SysV semaphore currently in use. |
| 1.3.6.1.4.1.546.1.1.9.3.1 | RowsemEntry | not-accessible | mandatory | An entry in the semaphore table. |
| 1.3.6.1.4.1.546.1.1.9.3.1.1 | ColumnsemID | read-only | mandatory | The unique semaphore ID. The value of this object represents the instance for the semEntry object. |
| 1.3.6.1.4.1.546.1.1.9.3.1.2 | ColumnsemKey | read-only | mandatory | The semaphore's key. Each semaphore is assigned a key value by the creating user. Its value is only significant to the creating process. |
| 1.3.6.1.4.1.546.1.1.9.3.1.3 | ColumnsemMode | read-only | mandatory | The semaphore permissions mode. The mode defines access permissions for the message queue as well as status information. See the man page ipcs(1) for more info… |
| 1.3.6.1.4.1.546.1.1.9.3.1.4 | ColumnsemOwner | read-only | mandatory | The user login name (e.g. root) of the owner of the semaphore. |
| 1.3.6.1.4.1.546.1.1.9.3.1.5 | ColumnsemGroup | read-only | mandatory | The group name (e.g. wheel) of the owner of the semaphore. |
| 1.3.6.1.4.1.546.1.1.9.3.1.6 | ColumnsemNsems | read-only | mandatory | The number of individual semaphores within this semaphore group. |
| 1.3.6.1.4.1.546.1.1.9.3.1.7 | ColumnsemDel | read-write | mandatory | Setting the value of 1, causes the agent to remove this entry from its semaphore table. The semaphore identifier is removed from the system-wide table and the … |
| 1.3.6.1.4.1.546.1.1.10 | Nodebuffers | |||
| 1.3.6.1.4.1.546.1.1.10 | NodeprocessStopTrap | This Trap is sent when using a Process Monitor Table entry to monitor the state of a process. When the processing being monitored dies or transitions into a Zo… | ||
| 1.3.6.1.4.1.546.1.1.10.1 | Nodembufs | |||
| 1.3.6.1.4.1.546.1.1.10.1.1 | ScalarnumMbufs | read-only | mandatory | The total number of mbufs contained in the mbuf pool. The BSD networking subsystem utilizes a buffer abstraction called 'mbufs'. This object indicates the numb… |
| 1.3.6.1.4.1.546.1.1.10.1.2 | ScalarnumClusters | read-only | mandatory | The total number of logical pages or clusters obtained from the page pool. Memory pages (or clusters) can also be attached to mbufs if needed. The size of this… |
| 1.3.6.1.4.1.546.1.1.10.1.3 | ScalarfreeClusters | read-only | mandatory | The number of free clusters or memory pages in the mbuf cluster pool. Monitoring the number of free clusters can help determine if the BSD protocol subsystem i… |
| 1.3.6.1.4.1.546.1.1.10.1.4 | ScalarnumDrops | read-only | mandatory | The number of times requests for mbufs were denied. An excessive rate of mbuf allocation failures may indicate an overloaded system or one with insufficient me… |
| 1.3.6.1.4.1.546.1.1.10.1.5 | ScalarnumWaits | read-only | mandatory | The number of times requests for mbufs were delayed. An excessive rate of mbuf allocation 'waits' may indicate an overloaded system or one with insufficient me… |
| 1.3.6.1.4.1.546.1.1.10.1.6 | ScalarnumDrains | read-only | mandatory | The total number of calls to protocol drain routines. When the protocol subsystem is running low on buffers, it can call each protocol's 'drain' function forci… |
| 1.3.6.1.4.1.546.1.1.10.1.7 | TablembufAllocTable | not-accessible | mandatory | This table contains an entry for each mbuf type that has been allocated. In the BSD networking subsystem, when an mbuf is allocated, the mbuf's intended use is… |
| 1.3.6.1.4.1.546.1.1.10.1.7.1 | RowmbufAllocEntry | not-accessible | mandatory | An entry in the mbuf Allocation table. |
| 1.3.6.1.4.1.546.1.1.10.1.7.1.1 | ColumnmbufType | read-only | mandatory | The type of mbuf. Mbuf types generally range from from 0 to 255; many mbuf types (numbers > 30) are undefined and generally not used. Their use and description… |
| 1.3.6.1.4.1.546.1.1.10.1.7.1.2 | ColumnmbufDesc | read-only | mandatory | A textual description of the mbuf type. Example mbuf descriptions include 'Packet header', 'Socket structure', etc. Undefined or unknown mbuf type descriptions… |
| 1.3.6.1.4.1.546.1.1.10.1.7.1.3 | ColumnmbufAlloc | read-only | mandatory | The number of mbufs allocated and declared of to be of this type. |
| 1.3.6.1.4.1.546.1.1.10.2 | Nodestrbufs | |||
| 1.3.6.1.4.1.546.1.1.10.2.1 | TablestrbufAllocTable | not-accessible | mandatory | This table contains an entry for each Streams buffer bucket sizes. |
| 1.3.6.1.4.1.546.1.1.10.2.1.1 | RowstrbufAllocEntry | not-accessible | mandatory | An entry in the Streams buffer allocation table. |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.1 | ColumnstrbufAllocIndex | read-only | mandatory | The table index of this entry. |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.2 | ColumnstrbufAllocSize | read-only | mandatory | The size of this bucket in bytes. The size is less than or equal to this value yet greater than the previous entry's bucket size. For example, if the bucket si… |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.3 | ColumnstrbufAllocCurrent | read-only | mandatory | The number of Streams buffers of this currently allocated. Comparing the value of this object to strbufAllocMax can help one determine if the system is properl… |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.4 | ColumnstrbufAllocMaxs | read-only | mandatory | The maximum number of Streams buffers of this size ever allocated at any one time. This value serves as a high-water mark for buffer allocations of this size. |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.5 | ColumnstrbufAllocTotals | read-only | mandatory | The total number of allocations of Streams buffers of this bucket size. A high allocation rate can help one diagnose an overloaded system. |
| 1.3.6.1.4.1.546.1.1.10.2.1.1.6 | ColumnstrbufAllocFails | read-only | mandatory | The total number of allocation failures for Streams buffers of this bucket size. A high rate of failure can indicate an overloaded system or one that is not pr… |
| 1.3.6.1.4.1.546.1.1.10.3 | NodeioBufferCache | |||
| 1.3.6.1.4.1.546.1.1.10.3.1 | ScalarnumBreadRequests | read-only | mandatory | The total number of calls to the kernel's bread() function. This function is the primary read interface to the kernel's buffer pool used for file system I/O. O… |
| 1.3.6.1.4.1.546.1.1.10.3.2 | ScalarnumBreadHits | read-only | mandatory | The number of kernel buffer cache 'hits'. The kernel caches previously used I/O buffers in an attempt to avoid excessive reading and writing to disk. A cache '… |
| 1.3.6.1.4.1.546.1.1.10.3.3 | ScalarnumBufSleeps | read-only | mandatory | The total number of times the kernel had to 'sleep' for a buffer. The kernel 'sleeps' for a buffer when it fails to find it in the cache and must access the di… |
| 1.3.6.1.4.1.546.1.1.10.3.4 | ScalarnumAgeAllocs | read-only | mandatory | The total number of times an aged buffer was allocated. The buffer pool is stored in one of several lists. One such list, the AGE list, holds buffers buffers t… |
| 1.3.6.1.4.1.546.1.1.10.3.5 | ScalarnumLRUAllocs | read-only | mandatory | The total number times an LRU buffer was allocated. The Least-recently-used list is another list on which buffers are stored. They are allocated in a 'least-re… |
| 1.3.6.1.4.1.546.1.1.10.3.6 | ScalarminNumBufHdrs | read-only | mandatory | The minimum number of buffer headers to allocated. These headers are used at the head of each buffer hash list. This value represents an upper bound on the num… |
| 1.3.6.1.4.1.546.1.1.10.3.7 | ScalarnumAllocBuf | read-only | mandatory | Number of buffers that are currently allocated. Monitoring this variable, and others in the ioBufferCache group, can help indicate if the system is properly co… |
| 1.3.6.1.4.1.546.1.1.10.3.8 | ScalarioBufferHitRate | read-only | mandatory | Percentage of buffer cache lookups that result in a 'hit'. This value is derived from numBreadHits / numBreadRequests. |
| 1.3.6.1.4.1.546.1.1.11 | Nodednlc | |||
| 1.3.6.1.4.1.546.1.1.11 | NodeprocessStartTrap | This Trap is sent when using a Process Monitor Table entry to monitor the state of a process. When a process is re-started, and subsequently re-acquired by the… | ||
| 1.3.6.1.4.1.546.1.1.11.1 | ScalardnlcHits | read-only | mandatory | Total number of DNLC cache hits. |
| 1.3.6.1.4.1.546.1.1.11.2 | ScalardnlcMisses | read-only | mandatory | Total number of DNLC cache misses. |
| 1.3.6.1.4.1.546.1.1.11.3 | ScalardnlcEnters | read-only | mandatory | Total number of DNLC enters done. |
| 1.3.6.1.4.1.546.1.1.11.4 | ScalardnlcDblEnters | read-only | mandatory | Total number enters tried when already cached. |
| 1.3.6.1.4.1.546.1.1.11.5 | ScalardnlcLongEnters | read-only | mandatory | Total number of long names tried to enter. |
| 1.3.6.1.4.1.546.1.1.11.6 | ScalardnlcLongLooks | read-only | mandatory | Total number of long name lookup attempts. |
| 1.3.6.1.4.1.546.1.1.11.7 | ScalardnlcLruEmpty | read-only | mandatory | Total number of least-recently used list empty. |
| 1.3.6.1.4.1.546.1.1.11.8 | ScalardnlcPurges | read-only | mandatory | Total number of purges to the DNLC cache. |
| 1.3.6.1.4.1.546.1.1.11.9 | ScalardnlcHitRate | read-only | mandatory | Percentage of DNLC cache lookups that result in a 'hit'. Hit rates less than 90% are considered poor and may require kernel tuning. This value is derived from … |
| 1.3.6.1.4.1.546.1.1.11.10 | ScalardnlcCacheSize | read-only | mandatory | The maximum number of possible entries in the DNLC cache. If there is no set upper bound, 0 is returned. |
| 1.3.6.1.4.1.546.1.1.12 | NodeprocessThresholdTrap | This Trap is sent when using a Process Monitor Table entry to monitor some attribute (e.g. memory usage, process size) of a process for some threshold. When a … | ||
| 1.3.6.1.4.1.546.1.1.13 | NodeprocessClearTrap | This Trap is sent when using a Process Monitor Table entry to monitor some attribute (e.g. memory usage, process size) of a process for some threshold. When th… | ||
| 1.3.6.1.4.1.546.1.1.16 | NodelicenseTrap | This Trap is sent when SystemEDGE or associated modules failed to find a valid license. It can be used in conjunction with auto-licensing or remote-licensing s… | ||
| 1.3.6.1.4.1.546.1.1.18 | NodeaddrChangeTrap | This Trap is sent when SystemEDGE when it detects that its underlying IP address has changed perhaps due to DHCP or other administrative means. It includes up … | ||
| 1.3.6.1.4.1.546.1.1.19 | NodeprocGroupChangeTrap | Membership in a process group has changed (e.g. members have joined, left, or changed). | ||
| 1.3.6.1.4.1.546.2 | Nodedos | |||
| 1.3.6.1.4.1.546.3 | Nodeos2 | |||
| 1.3.6.1.4.1.546.4 | Nodewindows | |||
| 1.3.6.1.4.1.546.5 | Nodent | |||
| 1.3.6.1.4.1.546.5.1 | NodentSystem | |||
| 1.3.6.1.4.1.546.5.1.1 | ScalarntSystemVersion | read-only | mandatory | The kernel/system version including the release, build, and service-pack numbers. |
| 1.3.6.1.4.1.546.5.1.2 | ScalarntBuildNumber | read-only | mandatory | The kernel build number (e.g. 1057) |
| 1.3.6.1.4.1.546.5.1.3 | ScalarntServicePackNumber | read-only | mandatory | The system service-pack number. If no service-packs have been applied, then 0 is returned. |
| 1.3.6.1.4.1.546.5.1.4 | ScalarntWorkstationOrServer | read-only | mandatory | |
| 1.3.6.1.4.1.546.5.1.5 | ScalarntfsDisable8dot3NameCreation | read-only | mandatory | This object reflects whether the underlying NT system has enabled or disabled the creation of short names to correspond with long filenames. For example, if en… |
| 1.3.6.1.4.1.546.5.1.6 | ScalarntWin31FileSystem | read-only | mandatory | This object reflects whether the FAT will allow creation, enumeration, opening, or querying of long file names, and whether extended time stamp information is … |
| 1.3.6.1.4.1.546.5.1.7 | ScalarntCriticalSectTimeout | read-only | mandatory | The deadlock time-out for critical sections. |
| 1.3.6.1.4.1.546.5.1.8 | ScalarntGlobalFlag | read-only | mandatory | NT system global hexadecimal flag that controls various internal operations. |
| 1.3.6.1.4.1.546.5.1.9 | ScalarntIoPageLockLimit | read-only | mandatory | Specifies the limit of the number of bytes that can be locked for I/O operations. When 0, the default (512k) is used. |
| 1.3.6.1.4.1.546.5.1.10 | ScalarntLargeSystemCache | read-only | mandatory | A nonzero value indicates that the system favors the system-cache working set rather than the processes working set. |
| 1.3.6.1.4.1.546.5.1.11 | ScalarntPagedPoolSize | read-only | mandatory | Size of paged pool in bytes. When 0, system uses default size (32 MB). |
| 1.3.6.1.4.1.546.5.1.12 | ScalarntNonPagedPoolSize | read-only | mandatory | Size of nonpaged pool in bytes. When 0, system uses default size (based on physical memory). |
| 1.3.6.1.4.1.546.5.1.13 | ScalarntPagingFiles | read-only | mandatory | List of paging files and their sizes used by the system for paging. For each paging file the description includes the file pathname, current size in MB and max… |
| 1.3.6.1.4.1.546.5.1.14 | ScalarntSystemPages | read-only | mandatory | This object defines the number of system page table entries reserved for I/O buffers and other information. |
| 1.3.6.1.4.1.546.5.1.15 | ScalarntOptionalSubsystem | read-only | mandatory | This object lists those subsystems that are only loaded when the user starts a depending application. |
| 1.3.6.1.4.1.546.5.1.16 | ScalarntCmdlineOptions | read-only | mandatory | This object lists the command-line that runs when an MS-DOS application is launched under NT. |
| 1.3.6.1.4.1.546.5.1.17 | ScalarntLPTTimeout | read-only | mandatory | This object defines how many seconds after the LPT port has been used that Windows NT waits before grabbing the port, closing it, and flushing the output. This… |
| 1.3.6.1.4.1.546.5.1.18 | ScalarntDosMemSize | read-only | mandatory | Size in MBytes of memory to be given to each individual MS-DOS virtual DOS machine (VDM). |
| 1.3.6.1.4.1.546.5.1.19 | ScalarntWowCmdline | read-only | mandatory | This object defines the command line that runs when a 16-bit Windows-based application is started. The switches instruct NT to start either an MS-DOS VDM or a … |
| 1.3.6.1.4.1.546.5.1.20 | ScalarntWowSize | read-only | mandatory | For RISC based computers, this object defines the amount of memory provided in a VDM when a WOW session is started. Value is in MBytes. |
| 1.3.6.1.4.1.546.5.1.21 | ScalarntUserFullScreen | read-only | mandatory | This object indicates whether full-screen or windowed mode is used for the console by default. Valid on x86 machines only. |
| 1.3.6.1.4.1.546.5.1.22 | ScalarntHistoryBufferSize | read-only | mandatory | This object indicates the number of commands stored in the history buffer by default. |
| 1.3.6.1.4.1.546.5.1.23 | ScalarntNumberHistoryBuffers | read-only | mandatory | This object indicates the number of history buffers associated with the console by default. |
| 1.3.6.1.4.1.546.5.1.24 | ScalarntQuickEdit | read-only | mandatory | This object indicates if Quick-Edit mode is enabled by default. |
| 1.3.6.1.4.1.546.5.1.25 | ScalarntScreenBufferSize | read-only | mandatory | Width and height of the default console screen buffer. |
| 1.3.6.1.4.1.546.5.1.26 | ScalarntWindowSize | read-only | mandatory | Default width and height of the console window. |
| 1.3.6.1.4.1.546.5.1.27 | ScalarntWindowsAppInitDLLs | read-only | mandatory | Lists the DLLs that will be attached to all Windows-based applications. |
| 1.3.6.1.4.1.546.5.1.28 | ScalarntWindowsDeviceNotSelectedTimeout | read-only | mandatory | Indicates how much time the system waits for a devices to be switched on. |
| 1.3.6.1.4.1.546.5.1.29 | ScalarntWindowsSpooler | read-only | mandatory | Indicates whether printer output is be sent through Print Manager. |
| 1.3.6.1.4.1.546.5.1.30 | ScalarntWindowsSwapDisk | read-only | mandatory | Indicates the name of disk drive and directory to which Windows for MS-DOS in standard-mode swaps non-Windows-based applications. |
| 1.3.6.1.4.1.546.5.1.31 | ScalarntWindowsXmitRetryTimeout | read-only | mandatory | Transmission retry timeout in seconds used by Print Manager. |
| 1.3.6.1.4.1.546.5.1.32 | ScalarntSystemRoot | read-only | mandatory | Drive and directory where the NT system resides. |
| 1.3.6.1.4.1.546.5.1.33 | ScalarntBuildType | read-only | mandatory | System build type (uniprocessor or multiprocessor). |
| 1.3.6.1.4.1.546.5.1.34 | ScalarntSysStartOptions | read-only | mandatory | System start options. |
| 1.3.6.1.4.1.546.5.1.35 | ScalarntSysBiosDate | read-only | mandatory | System BIOS date. |
| 1.3.6.1.4.1.546.5.1.36 | ScalarntSysBiosVersion | read-only | mandatory | System BIOS version. |
| 1.3.6.1.4.1.546.5.1.37 | ScalarntVideoResolution | read-only | mandatory | System video resolution. |
| 1.3.6.1.4.1.546.5.1.38 | ScalarntCrashDumpEnabled | read-only | mandatory | This object indicates whether debugging information is to be written to a log file in the event of a system crash. |
| 1.3.6.1.4.1.546.5.1.39 | ScalarntLogEvent | read-only | mandatory | This object indicates whether NTAS logging is enabled or disabled. If disabled, NT workstation logging is used. |
| 1.3.6.1.4.1.546.5.1.40 | ScalarntOverwrite | read-only | mandatory | Indicates whether an existing log file is to be overwritten by the new one. Enabled for NTAS, disabled for NT workstation. |
| 1.3.6.1.4.1.546.5.1.41 | ScalarntSendAlert | read-only | mandatory | Indicates whether an administrative alert is sent; enabled for NTAS, disabled for NT workstation. |
| 1.3.6.1.4.1.546.5.1.42 | ScalarntIsClustered | read-only | mandatory | Indicates whether this system is installed and/or running in a windows cluster |
| 1.3.6.1.4.1.546.5.1.43 | ScalarntClusterName | read-only | mandatory | The cluster name that this system is a member of. If the system is not a member of any cluster, then a zero-length string is returned. The cluster name can the… |
| 1.3.6.1.4.1.546.5.1.44 | ScalarntClusterMembers | read-only | mandatory | A comma-separated list of nodes that are members of the cluster in which this system is a member. Using this information, management software can determine the… |
| 1.3.6.1.4.1.546.5.1.45 | ScalarntClusterIsActive | read-only | mandatory | Indicates whether this system is the primary or active node in the NT cluster. It does not necessarily say if the cluster service(s) are active and up and runn… |
| 1.3.6.1.4.1.546.5.1.46 | ScalarntClusterActiveNode | read-only | mandatory | Indicates which of cluster members is active or primary node. Active node owns the Cluster Name resource object. |
| 1.3.6.1.4.1.546.5.2 | NodentThreads | |||
| 1.3.6.1.4.1.546.5.2.1 | TablentThreadTable | not-accessible | mandatory | Table of NT system threads. |
| 1.3.6.1.4.1.546.5.2.1.1 | RowntThreadEntry | not-accessible | mandatory | An entry in the NT system thread table. |
| 1.3.6.1.4.1.546.5.2.1.1.1 | ColumnntThreadPID | read-only | mandatory | The unique process ID with which this thread is contained and executing within. |
| 1.3.6.1.4.1.546.5.2.1.1.2 | ColumnntThreadNumber | read-only | mandatory | The thread number within a given process. Thread numbers are not unique across all threads in the system. |
| 1.3.6.1.4.1.546.5.2.1.1.3 | ColumnntThreadPrivTime | read-only | mandatory | The total elapsed time (in centiseconds) that this thread has executed in Privileged Mode. |
| 1.3.6.1.4.1.546.5.2.1.1.4 | ColumnntThreadProcTime | read-only | mandatory | The total elapsed time (in centiseconds) that this thread has used the processor to execute instructions. |
| 1.3.6.1.4.1.546.5.2.1.1.5 | ColumnntThreadUserTime | read-only | mandatory | Total elapsed time (in centiseconds) that this thread has executed in User Mode. |
| 1.3.6.1.4.1.546.5.2.1.1.6 | ColumnntThreadContextSwitches | read-only | mandatory | Number of thread context switches. |
| 1.3.6.1.4.1.546.5.2.1.1.7 | ColumnntThreadElapsedTime | read-only | mandatory | The total elapsed time (in seconds) this thread has been running. |
| 1.3.6.1.4.1.546.5.2.1.1.8 | ColumnntThreadPriorityBase | read-only | mandatory | The current base priority of this thread. The system may alter the thread's dynamic priority above, below the base priority. |
| 1.3.6.1.4.1.546.5.2.1.1.9 | ColumnntThreadPriority | read-only | mandatory | The current dynamic priority of this thread. |
| 1.3.6.1.4.1.546.5.2.1.1.10 | ColumnntThreadWaitReason | read-only | mandatory | Reason thread is waiting; valid only if ntThreadState is currently wait(5), otherwise undefined. |
| 1.3.6.1.4.1.546.5.2.1.1.11 | ColumnntThreadStartAddr | read-only | mandatory | The starting virtual address of this thread. |
| 1.3.6.1.4.1.546.5.2.1.1.12 | ColumnntThreadState | read-only | mandatory | The current state of this thread. |
| 1.3.6.1.4.1.546.5.2.1.1.13 | ColumnntThreadID | read-only | mandatory | The system-wide unique identifier associated with this thread. |
| 1.3.6.1.4.1.546.5.3 | NodentRegistry | |||
| 1.3.6.1.4.1.546.5.3.1 | ScalarntRegistryCurrentSize | read-only | mandatory | The current size of the registry in MBytes. |
| 1.3.6.1.4.1.546.5.3.2 | ScalarntRegistrySizeLimit | read-only | mandatory | The size limit of the registry in MBytes. |
| 1.3.6.1.4.1.546.5.4 | NodentServices | |||
| 1.3.6.1.4.1.546.5.4.1 | TablentServiceTable | not-accessible | mandatory | Table of NT system services |
| 1.3.6.1.4.1.546.5.4.1.1 | RowntServiceEntry | not-accessible | mandatory | An entry in the NT system service table. |
| 1.3.6.1.4.1.546.5.4.1.1.1 | ColumnntServiceIndex | read-only | mandatory | The index of this system service. |
| 1.3.6.1.4.1.546.5.4.1.1.2 | ColumnntServiceName | read-only | mandatory | The system service name. |
| 1.3.6.1.4.1.546.5.4.1.1.3 | ColumnntServicePathName | read-only | mandatory | The system service path. |
| 1.3.6.1.4.1.546.5.4.1.1.4 | ColumnntServiceStartType | read-write | mandatory | The manner in which the service is started; automatic(1) implies that the system starts the service at boot time while manual(2) implies that the service must … |
| 1.3.6.1.4.1.546.5.4.1.1.5 | ColumnntServiceParameters | read-only | mandatory | The parameters passed to this service when it is invoked. |
| 1.3.6.1.4.1.546.5.4.1.1.6 | ColumnntServiceState | read-write | mandatory | The current state of the system service. |
| 1.3.6.1.4.1.546.5.4.1.1.7 | ColumnntServiceObjectName | read-only | mandatory | The object name for this service. This indicates the user name the service is currently running as. |
| 1.3.6.1.4.1.546.5.5 | NodentPerformance | |||
| 1.3.6.1.4.1.546.5.5.1 | NodentSystemPerf | |||
| 1.3.6.1.4.1.546.5.5.1.1 | ScalarntTotalPrivTime | read-only | mandatory | Running counter of centiseconds spent by the system processor(s) in Privileged mode. |
| 1.3.6.1.4.1.546.5.5.1.2 | ScalarntTotalProcessorTime | read-only | mandatory | Running counter of centiseconds spent by the system processor(s) running Idle threads. Note that this is actually the inverse of the total processor time. |
| 1.3.6.1.4.1.546.5.5.1.3 | ScalarntTotalUserTime | read-only | mandatory | Running counter of centiseconds spent by the system processor(s) running User mode. |
| 1.3.6.1.4.1.546.5.5.1.4 | ScalarntAlignFixups | read-only | mandatory | The number of alignment faults fixed by the system. |
| 1.3.6.1.4.1.546.5.5.1.5 | ScalarntContextSwitches | read-only | mandatory | The total number of context switches that have occurred since the kernel was last initialized. A context switch occurs each time a thread gives up the CPU and … |
| 1.3.6.1.4.1.546.5.5.1.6 | ScalarntExceptionDispatches | read-only | mandatory | The total number of exceptions dispacted by the system since it was initialized. |
| 1.3.6.1.4.1.546.5.5.1.7 | ScalarntFileCtrlKBytes | read-only | mandatory | An aggregate of KBytes transferred for all file system operations that are neither reads or writes (e.g. file system control requests or device control request… |
| 1.3.6.1.4.1.546.5.5.1.8 | ScalarntFileCtrlOps | read-only | mandatory | Aggregate counter of all file system operations that are neither reads nor writes. |
| 1.3.6.1.4.1.546.5.5.1.9 | ScalarntFileDataOps | read-only | mandatory | Total number of read and write operations to file system devices issued by the system since system initialization. |
| 1.3.6.1.4.1.546.5.5.1.10 | ScalarntReadKBytes | read-only | mandatory | Aggregate number of KBytes transferred for all the file system read operations on this system since system initialization. |
| 1.3.6.1.4.1.546.5.5.1.11 | ScalarntReadOps | read-only | mandatory | Aggregate of all the file system read operations on this system since system initialization. |
| 1.3.6.1.4.1.546.5.5.1.12 | ScalarntWriteKBytes | read-only | mandatory | Aggregate number of KBytes transferred for all the file system write operations on this system since system initialization. |
| 1.3.6.1.4.1.546.5.5.1.13 | ScalarntWriteOps | read-only | mandatory | Aggregate number of all the file system write operations on this system since system initialization. |
| 1.3.6.1.4.1.546.5.5.1.14 | ScalarntFloatEmuls | read-only | mandatory | Number of floating emulations performed by the system. |
| 1.3.6.1.4.1.546.5.5.1.15 | ScalarntRunQLen | read-only | mandatory | Instantaneous processor queue length in threads and is equivalent to runQLen(kernelperf.4) |
| 1.3.6.1.4.1.546.5.5.1.16 | ScalarntSystemCalls | read-only | mandatory | The number of calls to system service routines. This object is equivalent to numSyscalls(kernelperf.16) |
| 1.3.6.1.4.1.546.5.5.1.17 | ScalarntInterrupts | read-only | mandatory | The number of hardware interrupts that have occurred. This object is equivalent to numInterrupts(kernelperf.17) |
| 1.3.6.1.4.1.546.5.5.2 | NodentCachePerf | |||
| 1.3.6.1.4.1.546.5.5.2.1 | ScalarntAsyncCopyReads | read-only | mandatory | Number of async reads from Cache pages involving a memory copy of the data from the Cache to the application's buffer. |
| 1.3.6.1.4.1.546.5.5.2.2 | ScalarntAsyncDataMaps | read-only | mandatory | Number of async data maps of file pages into the Cache. |
| 1.3.6.1.4.1.546.5.5.2.3 | ScalarntAsyncFastReads | read-only | mandatory | Number of direct-to-Cache async read operations. |
| 1.3.6.1.4.1.546.5.5.2.4 | ScalarntAsyncMDLReads | read-only | mandatory | Number of async memory descriptor list (MDL) reads from the Cache. The MDL contains the physical address of each page in the transfer thus permitting DMA of th… |
| 1.3.6.1.4.1.546.5.5.2.5 | ScalarntAsyncPinReads | read-only | mandatory | Number of async reads from the Cache in preparation to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the … |
| 1.3.6.1.4.1.546.5.5.2.6 | ScalarntCopyReadHits | read-only | mandatory | Number of Cache Copy Read requests that hit the cache and did not require a disk read. |
| 1.3.6.1.4.1.546.5.5.2.7 | ScalarntCopyReads | read-only | mandatory | The number of reads from Cache pages that involved a memory copy of data from the Cache to the application's buffer. |
| 1.3.6.1.4.1.546.5.5.2.8 | ScalarntDataFlushPages | read-only | mandatory | Number of pages of the Cache flushed to disk as a result of a flush request or to satisfy a write-through request. |
| 1.3.6.1.4.1.546.5.5.2.9 | ScalarntDataFlushes | read-only | mandatory | Number of Cache data flush operations. |
| 1.3.6.1.4.1.546.5.5.2.10 | ScalarntDataMapHits | read-only | mandatory | Numberof data maps in the Cache that could be resolved without retrieval from disk. |
| 1.3.6.1.4.1.546.5.5.2.11 | ScalarntDataMapPins | read-only | mandatory | Number of data maps in the Cache that resulted in pinning a page in main memory. |
| 1.3.6.1.4.1.546.5.5.2.12 | ScalarntDataMaps | read-only | mandatory | Number of times a file system such as NTFS or HPFS has mapped a page of a file into the Cache to read the page. |
| 1.3.6.1.4.1.546.5.5.2.13 | ScalarntFastReadNotPossible | read-only | mandatory | Number of times an API function call to bypass the file system to get at Cache data could not be honored without invoking the file system after all. |
| 1.3.6.1.4.1.546.5.5.2.14 | ScalarntFastReadResourceMisses | read-only | mandatory | Number of Cache misses necessitated by the lack of available resources to satisfy the request. |
| 1.3.6.1.4.1.546.5.5.2.15 | ScalarntFastReads | read-only | mandatory | Number of reads from Cache pages that bypass installed file systems and read from the Cache directly. |
| 1.3.6.1.4.1.546.5.5.2.16 | ScalarntLazyWriteFlushes | read-only | mandatory | The number of times the Cache's Lazy Write thread has written to disk. |
| 1.3.6.1.4.1.546.5.5.2.17 | ScalarntLazyWritePages | read-only | mandatory | Number of pages the Cache's Lazy Write thread has written to disk. Lazy Writing is the process of updating the disk after the page has been changed in memory s… |
| 1.3.6.1.4.1.546.5.5.2.18 | ScalarntMDLReadHits | read-only | mandatory | Number of Cache Memory Descriptor List (MDL) read requests that hit the Cache. |
| 1.3.6.1.4.1.546.5.5.2.19 | ScalarntMDLReads | read-only | mandatory | Number of MDL Cache reads. |
| 1.3.6.1.4.1.546.5.5.2.20 | ScalarntPinReadHits | read-only | mandatory | Number Cache Pin Read requests that hit the Cache. |
| 1.3.6.1.4.1.546.5.5.2.21 | ScalarntPinReads | read-only | mandatory | Number of pages read from the Cache that have been pinned in memory. |
| 1.3.6.1.4.1.546.5.5.2.22 | ScalarntSyncCopyReads | read-only | mandatory | Number of reads from Cache pages that wait for the copy operation to complete before proceeding. |
| 1.3.6.1.4.1.546.5.5.2.23 | ScalarntSyncDataMaps | read-only | mandatory | Number of times that a file system such as NTFS or HPFS maps a page of a file into the Cache to read the page. |
| 1.3.6.1.4.1.546.5.5.2.24 | ScalarntSyncFastReads | read-only | mandatory | Number of sync reads from Cache pages that bypass the installed file system and retrieve the data directly from the Cache. |
| 1.3.6.1.4.1.546.5.5.2.25 | ScalarntSyncMDLReads | read-only | mandatory | Number of reads from Cache pages that use a Memory Descriptor List (MDL) to access the pages. |
| 1.3.6.1.4.1.546.5.5.2.26 | ScalarntSyncPinReads | read-only | mandatory | Number of page reads that have resulted in the page being pinned in memory. |
| 1.3.6.1.4.1.546.5.5.3 | NodentMemoryPerf | |||
| 1.3.6.1.4.1.546.5.5.3.1 | ScalarntAvailKBytes | read-only | mandatory | Number of KBytes of virtual memory currently on the Zeroed, Free, and Standby lists. Zeroed and free memory is ready for use. Standby memory is memory removed … |
| 1.3.6.1.4.1.546.5.5.3.2 | ScalarntCacheKBytes | read-only | mandatory | Number of KBytes currently in use by the system Cache. |
| 1.3.6.1.4.1.546.5.5.3.3 | ScalarntCacheKBytesPeak | read-only | mandatory | Maximum number of KBytes used by the system Cache. |
| 1.3.6.1.4.1.546.5.5.3.4 | ScalarntCacheFaults | read-only | mandatory | Number of Cache faults whereby memory had to be located elsewhere. |
| 1.3.6.1.4.1.546.5.5.3.5 | ScalarntCommitLimit | read-only | mandatory | Size in KBytes of virtual memory that can be committed without having to expand the paging file(s). |
| 1.3.6.1.4.1.546.5.5.3.6 | ScalarntCommittedKBytes | read-only | mandatory | Number of KBytes of virtual memory that have been committed. |
| 1.3.6.1.4.1.546.5.5.3.7 | ScalarntDemandZeroFaults | read-only | mandatory | Number of page faults for pages that must be filled with zeros before fault is satisifed. |
| 1.3.6.1.4.1.546.5.5.3.8 | ScalarntFreeSysPageTableEntries | read-only | mandatory | Number of Page Table entries not currently in use by the system. |
| 1.3.6.1.4.1.546.5.5.3.9 | ScalarntPageFaults | read-only | mandatory | Number of page faults in the processor and is equivalent to numPageFaults(kernelperf.25) |
| 1.3.6.1.4.1.546.5.5.3.10 | ScalarntPageReads | read-only | mandatory | Number of times the disk was read to retrieve pages of virtual memory. |
| 1.3.6.1.4.1.546.5.5.3.11 | ScalarntPageWrites | read-only | mandatory | Number of times pages have been written to disk. |
| 1.3.6.1.4.1.546.5.5.3.12 | ScalarntPagesInput | read-only | mandatory | Number of pages read from disk to resolve memory references and is equivalent to numPageIns (kernelperf.22) |
| 1.3.6.1.4.1.546.5.5.3.13 | ScalarntPagesOutput | read-only | mandatory | Number of pages written to disk because the pages were modified and is equivalent to numPageOuts (kernelperf.23). |
| 1.3.6.1.4.1.546.5.5.3.14 | ScalarntPages | read-only | mandatory | Number of pages read or written from/to disk and is a sum of PagesInput(12) and PagesOutput(13). |
| 1.3.6.1.4.1.546.5.5.3.15 | ScalarntPoolNonPagedAllocs | read-only | mandatory | Number of calls to allocate space in the system Nonpaged pool. |
| 1.3.6.1.4.1.546.5.5.3.16 | ScalarntPoolNonPagedKBytes | read-only | mandatory | Number of KBytes in the Nonpaged pool which is a system memory area where space is acquired by operating systems facilities as they accomplish their tasks. The… |
| 1.3.6.1.4.1.546.5.5.3.17 | ScalarntPoolPagedAllocs | read-only | mandatory | Number of calls to allocate space in the system Paged Pool. Paged Pool is a system memory area where space is acquired by operating systems facilities as they … |
| 1.3.6.1.4.1.546.5.5.3.18 | ScalarntPoolPagedKBytes | read-only | mandatory | Number of KBytes in the Paged Pool. |
| 1.3.6.1.4.1.546.5.5.3.19 | ScalarntPagedResidentKBytes | read-only | mandatory | Size of paged Pool resident in core memory in KBytes. |
| 1.3.6.1.4.1.546.5.5.3.20 | ScalarntSysCacheResidentKBytes | read-only | mandatory | Number of KBytes currently resident in the global disk cache. |
| 1.3.6.1.4.1.546.5.5.3.21 | ScalarntSysCodeResidentKBytes | read-only | mandatory | Number of KBytes of System Code Total Bytes currently resident in core memory. This is the code working set of the pagable executive. |
| 1.3.6.1.4.1.546.5.5.3.22 | ScalarntSysCodeTotalKBytes | read-only | mandatory | Total number of KBytes of pageable pages in ntoskrnl.exe, hal.dll, and the boot drivers and file systems loaded by ntldr/osloader. |
| 1.3.6.1.4.1.546.5.5.3.23 | ScalarntSysDriverResidentKBytes | read-only | mandatory | Number of KBytes of System Driver Total KBytes currently resident in core memory. The number is the code working set of the pagable drivers. |
| 1.3.6.1.4.1.546.5.5.3.24 | ScalarntSysDriverTotalKBytes | read-only | mandatory | Number of KBytes of pageable pages in all other loaded device drivers. |
| 1.3.6.1.4.1.546.5.5.3.25 | ScalarntTransitionFaults | read-only | mandatory | Number of page faults resolved by recovering pages that were in transition to disk at time of page fault. |
| 1.3.6.1.4.1.546.5.5.3.26 | ScalarntWriteCopies | read-only | mandatory | Number of page faults that have been satisfied by making a copy of a page when an attempt to write the page was made while it was shared. |
| 1.3.6.1.4.1.546.5.5.4 | NodentPageFilePerf | |||
| 1.3.6.1.4.1.546.5.5.4.1 | ScalarntPageFileUsage | read-only | mandatory | The percentage of the page file(s) used. |
| 1.3.6.1.4.1.546.5.5.4.2 | ScalarntPageFilePeakUsage | read-only | mandatory | The peak usage of the page file(s). |
| 1.3.6.1.4.1.546.5.6 | NodentEvents | |||
| 1.3.6.1.4.1.546.5.6.1 | ScalarntEventApplicationCount | read-only | mandatory | The number of events in the Application event log. |
| 1.3.6.1.4.1.546.5.6.2 | ScalarntEventSecurityCount | read-only | mandatory | The number of events in the Security event log. |
| 1.3.6.1.4.1.546.5.6.3 | ScalarntEventSystemCount | read-only | mandatory | The number of events in the System event log. |
| 1.3.6.1.4.1.546.5.6.4 | TablentEventMonTable | not-accessible | mandatory | Table containing NT Event Log monitor entries; each entry specifies an Event Log and regular expression. The agent periodically stats the event logs to see if … |
| 1.3.6.1.4.1.546.5.6.4.1 | RowntEventMonEntry | not-accessible | mandatory | An entry in the ntEventMonTable. |
| 1.3.6.1.4.1.546.5.6.4.1.1 | ColumnntEventMonIndex | read-only | mandatory | An index that uniquely identifies an entry in the ntEventMonTable. |
| 1.3.6.1.4.1.546.5.6.4.1.2 | ColumnntEventMonLog | read-write | mandatory | The number identifying the NT event log to scan for pattern matches. Possible values are Application(1), Security(2), and System(3). On Win2k and higher, dnsSe… |
| 1.3.6.1.4.1.546.5.6.4.1.3 | ColumnntEventMonTime | read-only | mandatory | The time (based on sysUpTime) at which the event occurred. |
| 1.3.6.1.4.1.546.5.6.4.1.4 | ColumnntEventMonTraps | read-only | mandatory | The number of traps sent by the agent on behalf of this entry. One trap PDU message is sent for each match the agent detects in the corresponding event log. Th… |
| 1.3.6.1.4.1.546.5.6.4.1.5 | ColumnntEventMonTypeLastMatch | read-only | mandatory | The number identifying the event type of the last event that matched the search criteria. Types 1 through 5 are defined by Windows NT. Type noMatch(6) indicate… |
| 1.3.6.1.4.1.546.5.6.4.1.6 | ColumnntEventMonTypeFilter | read-write | mandatory | The number identifying the event type to match. Types 1 through 5 are defined by Windows NT. Type all(6) indicates that all event types will match. |
| 1.3.6.1.4.1.546.5.6.4.1.7 | ColumnntEventMonSrcLastMatch | read-only | mandatory | The source name of the last event log entry that matched this monitor entry. Each time a match occurs, this variable is updated. |
| 1.3.6.1.4.1.546.5.6.4.1.8 | ColumnntEventMonSrcFilter | read-write | mandatory | The display string representation of the regular expression to match the source name in the event log. Valid regular expressions are those as defined in ed(1). |
| 1.3.6.1.4.1.546.5.6.4.1.9 | ColumnntEventMonDescLastMatch | read-only | mandatory | The text description message from the last event log entry that matched this monitor entry. Each time a match occurs, this variable is updated. |
| 1.3.6.1.4.1.546.5.6.4.1.10 | ColumnntEventMonDescFilter | read-write | mandatory | The display string representation of the regular expression to match the description in the event log. Valid regular expressions are those as defined in ed(1). |
| 1.3.6.1.4.1.546.5.6.4.1.11 | ColumnntEventMonStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.5.6.4.1.12 | ColumnntEventMonDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.5.6.4.1.13 | ColumnntEventMonAction | read-write | mandatory | A string specifying the command to be executed upon finding a match. |
| 1.3.6.1.4.1.546.5.6.4.1.14 | ColumnntEventMonFlags | read-write | mandatory | The flags field dictates the behavior of each ntEventMonEntry. Each bit in the integer represents the toggling of an option. The flags field of 0x00 is enables… |
| 1.3.6.1.4.1.546.5.6.4.1.15 | ColumnntEventMonMatches | read-only | mandatory | The number of nt-event matches detected by SystemEDGE. This value is incremented regardless of whether Traps are sent for this entry or not. Polling this varia… |
| 1.3.6.1.4.1.546.5.6.5 | ScalarntEventApplicationMaxSize | read-only | mandatory | The maximum size (in Bytes) of the Application event log. |
| 1.3.6.1.4.1.546.5.6.6 | ScalarntEventApplicationRetention | read-only | mandatory | The retention flag for the Application event log. This flag indicates the settings for the Event Log Wrapping settings. |
| 1.3.6.1.4.1.546.5.6.7 | ScalarntEventSecurityMaxSize | read-only | mandatory | The maximum size (in Bytes) of the Security event log. |
| 1.3.6.1.4.1.546.5.6.8 | ScalarntEventSecurityRetention | read-only | mandatory | The retention flag for the Security event log. This flag indicates the settings for the Event Log Wrapping settings. |
| 1.3.6.1.4.1.546.5.6.9 | ScalarntEventSystemMaxSize | read-only | mandatory | The maximum size (in Bytes) of the System event log. |
| 1.3.6.1.4.1.546.5.6.10 | ScalarntEventSystemRetention | read-only | mandatory | The retention flag for the System event log. This flag indicates the settings for the Event Log Wrapping settings. |
| 1.3.6.1.4.1.546.5.6.11 | ScalarntEventUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used NT event monitor Table index number. It can be used for NT event monitor table row creation optimization. |
| 1.3.6.1.4.1.546.5.6.12 | ScalarntEventMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with ntEventMatchIndex can be used to quickly determine the index number corresponding to a particular entry descript… |
| 1.3.6.1.4.1.546.5.6.13 | ScalarntEventMatchIndex | read-only | mandatory | See description for ntEventMatchDescr. |
| 1.3.6.1.4.1.546.5.7 | NodentRegPerf | |||
| 1.3.6.1.4.1.546.5.7.1 | ScalarntRegPerfDumpFile | read-only | mandatory | The name of the dump file specified by the registry. |
| 1.3.6.1.4.1.546.5.7.2 | ScalarntRegNumberOfThreads | read-only | mandatory | The total number of threads currently running in the system. This is obtained from the performance library. |
| 1.3.6.1.4.1.546.6 | Nodemonitor | |||
| 1.3.6.1.4.1.546.6.1 | TablemonitorTable | not-accessible | mandatory | Table describing the monitoring activities of the agent. Adding rows to this table causes the agent to monitor new objects; deleting rows from the table causes… |
| 1.3.6.1.4.1.546.6.1.1 | RowmonitorEntry | not-accessible | mandatory | Each entry in the Monitor Table represents a single variable or function that the agent is monitoring. Variables are those objects in the MIB for which the age… |
| 1.3.6.1.4.1.546.6.1.1.1 | ColumnmonIndex | read-only | mandatory | A unique value for entry in the monitorTable. The index values in the monitorTable may not necessarily be contiguous, but are unique. |
| 1.3.6.1.4.1.546.6.1.1.2 | ColumnmonDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.6.1.1.3 | ColumnmonInterval | read-write | mandatory | The interval, in seconds, between successive samples by the agent. It must be a multiple of 30 seconds. For example, if a manager wanted to sample the value of… |
| 1.3.6.1.4.1.546.6.1.1.4 | ColumnmonSampleType | read-write | mandatory | The type of sampling performed on the object represented by this entry. For example, for sampling and monitoring objects of type Counter, setting the appropria… |
| 1.3.6.1.4.1.546.6.1.1.5 | ColumnmonOID | read-write | mandatory | The object identifier (including properly formed instance) of the variable being monitoring by this monitorTable entry. For example, if a manager wanted to mon… |
| 1.3.6.1.4.1.546.6.1.1.6 | ColumnmonCurrVal | read-only | mandatory | This variable represents the current value of the object being monitored as last sampled by the agent. If the monSampleType is deltaValue(2), then this value r… |
| 1.3.6.1.4.1.546.6.1.1.7 | ColumnmonOperator | read-write | mandatory | The boolean operator performed in the expression: monCurrVal monOperator monValue. For example, to monitor a value such that an alarm is generated when its val… |
| 1.3.6.1.4.1.546.6.1.1.8 | ColumnmonValue | read-write | mandatory | The value against which the agent compares the current value. This value represents a threshold. Its semantics are not interpreted by the agent; therefore, the… |
| 1.3.6.1.4.1.546.6.1.1.9 | ColumnmonLastCall | read-only | mandatory | The time (based on sysUpTime) at which the agent last called or sampled the object being monitored. If the object has not yet been sampled, 0 is returned. |
| 1.3.6.1.4.1.546.6.1.1.10 | ColumnmonNumTraps | read-only | mandatory | The number of traps sent for this particular monitor entry. This value indicates how many times the agent has evaluated this entry's expression as true. Recall… |
| 1.3.6.1.4.1.546.6.1.1.11 | ColumnmonLastTrap | read-only | mandatory | The time (based on sysUpTime) at which the agent last sent a trap for this Monitor Table entry. If no traps have been sent, the value is 0. |
| 1.3.6.1.4.1.546.6.1.1.12 | ColumnmonRowStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.6.1.1.13 | ColumnmonMinValue | read-only | mandatory | The minimum sampled value or 0 upon initialization |
| 1.3.6.1.4.1.546.6.1.1.14 | ColumnmonMaxValue | read-only | mandatory | The maximum sampled value or 0 upon initialization |
| 1.3.6.1.4.1.546.6.1.1.15 | ColumnmonAction | read-write | mandatory | A string specifying the command to be executed upon finding a match. |
| 1.3.6.1.4.1.546.6.1.1.16 | ColumnmonFlags | read-write | mandatory | The flags field dictates the behavior of each Monitor Entry. Each bit in the integer represents the toggling of an option. The flags field of 0x00 is enables d… |
| 1.3.6.1.4.1.546.6.2 | ScalarmonUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used monitor index number. It can be used for monitor table row creation optimization. |
| 1.3.6.1.4.1.546.6.3 | ScalarmonMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with monMatchIndex can be used to quickly determine the index number corresponding to a particular entry description.… |
| 1.3.6.1.4.1.546.6.4 | ScalarmonMatchIndex | read-only | mandatory | See description for monMatchDescr. |
| 1.3.6.1.4.1.546.7 | Nodeempireexp | |||
| 1.3.6.1.4.1.546.8 | Nodedistribsys | |||
| 1.3.6.1.4.1.546.8.1 | Noderpc | |||
| 1.3.6.1.4.1.546.8.1.1 | ScalarclientRPCCalls | read-only | mandatory | The total number of RPC calls sent by the RPC client protocol software. |
| 1.3.6.1.4.1.546.8.1.2 | ScalarclientRPCBadcalls | read-only | mandatory | The total number of RPC calls rejected by the RPC client protocol software. |
| 1.3.6.1.4.1.546.8.1.3 | ScalarclientRPCRetrans | read-only | mandatory | The total number of times an RPC call had to be retransmitted due to a timeout while waiting for an RPC server reply. |
| 1.3.6.1.4.1.546.8.1.4 | ScalarclientRPCBadxids | read-only | mandatory | The total number of times a server RPC reply was received for which no outstanding call exists. |
| 1.3.6.1.4.1.546.8.1.5 | ScalarclientRPCTimeouts | read-only | mandatory | The total number times an RPC call timed out while waiting for a reply from the RPC server. |
| 1.3.6.1.4.1.546.8.1.6 | ScalarclientRPCWaits | read-only | mandatory | The total number of times an RPC call has to wait because no client handle was available. |
| 1.3.6.1.4.1.546.8.1.7 | ScalarclientRPCNewcreds | read-only | mandatory | The total number of times authentication information had to be refreshed. |
| 1.3.6.1.4.1.546.8.1.8 | ScalarclientRPCTimers | read-only | mandatory | The total number of times the calculated time-out value was greater than or equal to the minimum specified time-out value for an RPC call. |
| 1.3.6.1.4.1.546.8.1.9 | ScalarserverRPCCalls | read-only | mandatory | The total number of RPC calls received by the RPC server protocol software. |
| 1.3.6.1.4.1.546.8.1.10 | ScalarserverRPCBadcalls | read-only | mandatory | The total number of calls rejected by the RPC server protocol softeware; it is equivalent to the sum of the MIB objects serverRPCBadlen and serverRPCxdrcall. |
| 1.3.6.1.4.1.546.8.1.11 | ScalarserverRPCNullrecvs | read-only | mandatory | The number of RPC requests not available when it was thought to be received. |
| 1.3.6.1.4.1.546.8.1.12 | ScalarserverRPCBadlens | read-only | mandatory | The number of RPC requests whose lengths were shorter than the minimum size RPC message. |
| 1.3.6.1.4.1.546.8.1.13 | ScalarserverRPCXdrcalls | read-only | mandatory | The number of RPC requests whose header could not be XDR decoded. |
| 1.3.6.1.4.1.546.8.2 | Nodenfs | |||
| 1.3.6.1.4.1.546.8.2.1 | ScalarclientNFSCalls | read-only | mandatory | The total number of NFS calls sent by the NFS client protocol software. |
| 1.3.6.1.4.1.546.8.2.2 | ScalarclientNFSBadcalls | read-only | mandatory | The total number of times an NFS call was rejected by the underlying client RPC protocol software. |
| 1.3.6.1.4.1.546.8.2.3 | ScalarclientNFSNclgets | read-only | mandatory | The total number of times a client NFS handle was received by the NFS client protocol software. |
| 1.3.6.1.4.1.546.8.2.4 | ScalarclientNFSNclsleeps | read-only | mandatory | The total number of times a client NFS call had to sleep while waiting for a client NFS handle. |
| 1.3.6.1.4.1.546.8.2.5 | ScalarclientNFSNulls | read-only | mandatory | The total number of NFS 'NULL' procedure calls sent by the client NFS protocol software. The 'NULL' procedure is often used to allow server response testing an… |
| 1.3.6.1.4.1.546.8.2.6 | ScalarclientNFSGetattrs | read-only | mandatory | The total number of NFS 'GetAttr' procedure calls sent by the client NFS protocol software. This function is used to obtain attributes for a given file. |
| 1.3.6.1.4.1.546.8.2.7 | ScalarclientNFSSetattrs | read-only | mandatory | The total number of NFS 'SetAttr' procedure calls sent by the client NFS protocol software. This function is used to set a file's attributes. |
| 1.3.6.1.4.1.546.8.2.8 | ScalarclientNFSRoots | read-only | mandatory | The total number of NFS 'Root' procedure calls sent by the client NFS protocol software. This function has been declared obsolete. |
| 1.3.6.1.4.1.546.8.2.9 | ScalarclientNFSLookups | read-only | mandatory | The total number of NFS 'Lookup' procedure calls sent by the client NFS protocol software. This function is used to retrieve a file's attributes and handle. |
| 1.3.6.1.4.1.546.8.2.10 | ScalarclientNFSReadlinks | read-only | mandatory | The total number of NFS 'Read link' procedure calls sent by the client NFS protocol software. This function is used to read from a symbolic link. |
| 1.3.6.1.4.1.546.8.2.11 | ScalarclientNFSReads | read-only | mandatory | The total number of NFS 'Read' procedure calls sent by the client NFS protocol software. This function is used to read data (in units of bytes) from a give fil… |
| 1.3.6.1.4.1.546.8.2.12 | ScalarclientNFSWrcaches | read-only | mandatory | The total number of NFS 'Write Cache' procedure calls sent by the client NFS protocol software. This function is to be used in future versions of the NFS proto… |
| 1.3.6.1.4.1.546.8.2.13 | ScalarclientNFSWrites | read-only | mandatory | The total number of NFS 'Write' procedure calls sent by the client NFS protocol software. This function is used to write data (in units of bytes) to a given fi… |
| 1.3.6.1.4.1.546.8.2.14 | ScalarclientNFSCreates | read-only | mandatory | The total number of NFS 'Create' procedure calls sent by the client NFS protocol software. This function is used to create a file in a given directory. |
| 1.3.6.1.4.1.546.8.2.15 | ScalarclientNFSRemoves | read-only | mandatory | The total number of NFS 'Remove' procedure calls sent by the client NFS protocol software. This function is used to remove a file from a given directory. |
| 1.3.6.1.4.1.546.8.2.16 | ScalarclientNFSRenames | read-only | mandatory | The total number of NFS 'Rename' procedure calls sent by the client NFS protocol software. This function is used to rename a given file. |
| 1.3.6.1.4.1.546.8.2.17 | ScalarclientNFSLinks | read-only | mandatory | The total number of NFS 'Create Link' procedure calls sent by the client NFS protocol software. This function is used to create a link to a given file. |
| 1.3.6.1.4.1.546.8.2.18 | ScalarclientNFSSymlinks | read-only | mandatory | The total number of NFS 'Create Symbolic Link' procedure calls sent by the client NFS protocol software. This function is used to create a symbolic link to a g… |
| 1.3.6.1.4.1.546.8.2.19 | ScalarclientNFSMkdirs | read-only | mandatory | The total number of NFS 'mkdir' procedure calls sent by the client NFS protocol software. This function is used to create a directory within a given directory. |
| 1.3.6.1.4.1.546.8.2.20 | ScalarclientNFSRmdirs | read-only | mandatory | The total number of NFS 'rmdir' procedure calls sent by the client NFS protocol software. This function is used to remove a given directory. |
| 1.3.6.1.4.1.546.8.2.21 | ScalarclientNFSReaddirs | read-only | mandatory | The total number of NFS 'readdir' procedure calls sent by the client NFS protocol software. This function is used to read a variable number of directory entrie… |
| 1.3.6.1.4.1.546.8.2.22 | ScalarclientNFSFsstats | read-only | mandatory | The total number of NFS 'stat' procedure calls sent by the client NFS protocol software. This function is used to retrieve file system statistics. |
| 1.3.6.1.4.1.546.8.2.23 | ScalarserverNFSCalls | read-only | mandatory | The total number of NFS calls received by the NFS server protocol software. |
| 1.3.6.1.4.1.546.8.2.24 | ScalarserverNFSBadcalls | read-only | mandatory | The total number of times an NFS call was rejected by the underlying server RPC protocol software. |
| 1.3.6.1.4.1.546.8.2.25 | ScalarserverNFSNulls | read-only | mandatory | The total number of NFS 'NULL' procedure calls received by the server NFS protocol software. The 'NULL' procedure is often used to allow server response testin… |
| 1.3.6.1.4.1.546.8.2.26 | ScalarserverNFSGetattrs | read-only | mandatory | The total number of NFS 'GetAttr' procedure calls received by the server NFS protocol software. This function is used to obtain attributes for a given file. |
| 1.3.6.1.4.1.546.8.2.27 | ScalarserverNFSSetattrs | read-only | mandatory | The total number of NFS 'SetAttr' procedure calls received by the server NFS protocol software. This function is used to set a file's attributes. |
| 1.3.6.1.4.1.546.8.2.28 | ScalarserverNFSRoots | read-only | mandatory | The total number of NFS 'Root' procedure calls received by the server NFS protocol software. This function has been declared obsolete. |
| 1.3.6.1.4.1.546.8.2.29 | ScalarserverNFSLookups | read-only | mandatory | The total number of NFS 'Lookup' procedure calls received by the server NFS protocol software. This function is used to retrieve a file's attributes and handle. |
| 1.3.6.1.4.1.546.8.2.30 | ScalarserverNFSReadlinks | read-only | mandatory | The total number of NFS 'Read link' procedure calls received by the server NFS protocol software. This function is used to read from a symbolic link. |
| 1.3.6.1.4.1.546.8.2.31 | ScalarserverNFSReads | read-only | mandatory | The total number of NFS 'Read' procedure calls received by the server NFS protocol software. This function is used to read data (in units of bytes) from a give… |
| 1.3.6.1.4.1.546.8.2.32 | ScalarserverNFSWrcaches | read-only | mandatory | The total number of NFS 'Write Cache' procedure calls received by the server NFS protocol software. This function is to be used in future versions of the NFS p… |
| 1.3.6.1.4.1.546.8.2.33 | ScalarserverNFSWrites | read-only | mandatory | The total number of NFS 'Write' procedure calls received by the server NFS protocol software. This function is used to write data (in units of bytes) to a give… |
| 1.3.6.1.4.1.546.8.2.34 | ScalarserverNFSCreates | read-only | mandatory | The total number of NFS 'Create' procedure calls received by the server NFS protocol software. This function is used to create a file in a given directory. |
| 1.3.6.1.4.1.546.8.2.35 | ScalarserverNFSRemoves | read-only | mandatory | The total number of NFS 'Remove' procedure calls received by the server NFS protocol software. This function is used to remove a file from a given directory. |
| 1.3.6.1.4.1.546.8.2.36 | ScalarserverNFSRenames | read-only | mandatory | The total number of NFS 'Rename' procedure calls received by the server NFS protocol software. This function is used to rename a given file. |
| 1.3.6.1.4.1.546.8.2.37 | ScalarserverNFSLinks | read-only | mandatory | The total number of NFS 'Create Link' procedure calls received by the server NFS protocol software. This function is used to create a link to a given file. |
| 1.3.6.1.4.1.546.8.2.38 | ScalarserverNFSSymlinks | read-only | mandatory | The total number of NFS 'Create Symbolic Link' procedure calls received by the server NFS protocol software. This function is used to create a symbolic link to… |
| 1.3.6.1.4.1.546.8.2.39 | ScalarserverNFSMkdirs | read-only | mandatory | The total number of NFS 'mkdir' procedure calls received by the server NFS protocol software. This function is used to create a directory within a given direct… |
| 1.3.6.1.4.1.546.8.2.40 | ScalarserverNFSRmdirs | read-only | mandatory | The total number of NFS 'rmdir' procedure calls received by the server NFS protocol software. This function is used to remove a given directory. |
| 1.3.6.1.4.1.546.8.2.41 | ScalarserverNFSReaddirs | read-only | mandatory | The total number of NFS 'readdir' procedure calls received by the server NFS protocol software. This function is used to read a variable number of directory en… |
| 1.3.6.1.4.1.546.8.2.42 | ScalarserverNFSFsstats | read-only | mandatory | The total number of NFS 'stat' procedure calls received by the server NFS protocol software. This function is used to retrieve file system statistics. |
| 1.3.6.1.4.1.546.8.3 | Nodenis | |||
| 1.3.6.1.4.1.546.9 | Nodetraps | |||
| 1.3.6.1.4.1.546.9.1 | NodemonitorEvent | |||
| 1.3.6.1.4.1.546.9.2 | NodekernelErrorEvent | |||
| 1.3.6.1.4.1.546.9.3 | NodemonitorEntryNotReadyEvent | |||
| 1.3.6.1.4.1.546.9.4 | NodelogMonMatchEvent | |||
| 1.3.6.1.4.1.546.9.5 | NodelogMonNotReadyEvent | |||
| 1.3.6.1.4.1.546.9.6 | NodesendTrapEvent | |||
| 1.3.6.1.4.1.546.9.7 | NodentEventMonMatchEvent | |||
| 1.3.6.1.4.1.546.9.8 | NodentEventMonNotReadyEvent | |||
| 1.3.6.1.4.1.546.9.9 | NodemonitorClearEvent | |||
| 1.3.6.1.4.1.546.9.10 | NodeprocessStopEvent | |||
| 1.3.6.1.4.1.546.9.11 | NodeprocessStartEvent | |||
| 1.3.6.1.4.1.546.9.12 | NodeprocessThresholdEvent | |||
| 1.3.6.1.4.1.546.9.13 | NodeprocessClearEvent | |||
| 1.3.6.1.4.1.546.9.16 | NodelicenseEvent | |||
| 1.3.6.1.4.1.546.9.17 | NodefwLogmonEvent | |||
| 1.3.6.1.4.1.546.9.18 | NodeaddrChangeEvent | |||
| 1.3.6.1.4.1.546.9.19 | NodeprocGroupChangeEvent | |||
| 1.3.6.1.4.1.546.10 | NodeempireHistory | |||
| 1.3.6.1.4.1.546.10.1 | TableempireHistoryCtrlTable | not-accessible | mandatory | Table describing/controlling the object history collection. Adding rows to this table causes the agent to track the history of additional objects; deleting row… |
| 1.3.6.1.4.1.546.10.1.1 | RowempireHistoryCtrlEntry | not-accessible | mandatory | A list of parameters that set up a periodic sampling of a single object value contained within the agent's internal MIB. |
| 1.3.6.1.4.1.546.10.1.1.1 | ColumnempireHistoryCtrlIndex | read-only | mandatory | An index that uniquely identifies an entry in the empireHistoryCtrlTable. Each such entry defines a periodic sampling/history that the agent performs. The samp… |
| 1.3.6.1.4.1.546.10.1.1.2 | ColumnempireHistoryCtrlDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.10.1.1.3 | ColumnempireHistoryCtrlInterval | read-write | mandatory | The interval in seconds between successive samples. The sample interval must be a multiple of 30 seconds. |
| 1.3.6.1.4.1.546.10.1.1.4 | ColumnempireHistoryCtrlObjID | read-write | mandatory | The object identifier of the particular object to be sampled. This object identifier must refer to a valid object and be of base type INTEGER. For example, obj… |
| 1.3.6.1.4.1.546.10.1.1.5 | ColumnempireHistoryCtrlObjType | read-only | mandatory | The ASN1/SNMP tag value of the object being sampled. For example, an SNMP Gauge would be 0x42 or 66 decimal. |
| 1.3.6.1.4.1.546.10.1.1.6 | ColumnempireHistoryCtrlBucketsReq | read-write | mandatory | The requested number of discrete samples of data to be saved in the empireHistoryTable. When this object is created or modified, the agent sets the empireHisto… |
| 1.3.6.1.4.1.546.10.1.1.7 | ColumnempireHistoryCtrlBucketsGrant | read-only | mandatory | The number of number of discrete samples of data which shall be saved in the empireHistoryCtrlTable. |
| 1.3.6.1.4.1.546.10.1.1.8 | ColumnempireHistoryCtrlLastCall | read-only | mandatory | The value of sysUpTime when this entry was last evaluated by the agent. |
| 1.3.6.1.4.1.546.10.1.1.9 | ColumnempireHistoryCtrlCreateTime | read-only | mandatory | The value of sysUpTime when this entry was created by the agent. |
| 1.3.6.1.4.1.546.10.1.1.10 | ColumnempireHistoryCtrlStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.10.2 | TableempireHistoryTable | not-accessible | mandatory | Table containing the history samples corresponding to history control entries contained in the empireHistoryCtrlTable. For each entry in the control table, a s… |
| 1.3.6.1.4.1.546.10.2.1 | RowempireHistoryEntry | not-accessible | mandatory | A historical sample of an object in the agent's MIB. Each sample is associated with an entry in the empireHistoryCtrlTable which set up the parameters for a re… |
| 1.3.6.1.4.1.546.10.2.1.1 | ColumnempireHistoryIndex | read-only | mandatory | The history of which this entry is a part. This value identifies a row in the empireHistoryCtrlTable of which this sample is a part. |
| 1.3.6.1.4.1.546.10.2.1.2 | ColumnempireHistorySampleIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same history control entry. This index star… |
| 1.3.6.1.4.1.546.10.2.1.3 | ColumnempireHistoryStartTime | read-only | mandatory | The value of sysUpTime at which the first sample was taken. |
| 1.3.6.1.4.1.546.10.2.1.4 | ColumnempireHistorySampleTime | read-only | mandatory | The value of sysUpTime at which this particular sample was taken. |
| 1.3.6.1.4.1.546.10.2.1.5 | ColumnempireHistoryValue | read-only | mandatory | The value of this sample. |
| 1.3.6.1.4.1.546.10.3 | ScalarhistCtrlUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used history control index number. It can be used for history control table row creation optimization. |
| 1.3.6.1.4.1.546.10.4 | ScalarhistCtrlMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with histCtrlMatchIndex can be used to quickly determine the index number corresponding to a particular entry descrip… |
| 1.3.6.1.4.1.546.10.5 | ScalarhistCtrlMatchIndex | read-only | mandatory | See description for histCtrlMatchDescr. |
| 1.3.6.1.4.1.546.11 | NodelogMonitor | |||
| 1.3.6.1.4.1.546.11.1 | TablelogMonitorTable | not-accessible | mandatory | Table containing log monitor entries; each entry specifies a log file and regular expression. The agent periodically stats the log files to see if they have be… |
| 1.3.6.1.4.1.546.11.1.1 | RowlogMonitorEntry | not-accessible | mandatory | An entry in the logMonitorTable. |
| 1.3.6.1.4.1.546.11.1.1.1 | ColumnlogMonitorIndex | read-only | mandatory | An index that uniquely identifies an entry in the logMonitorTable. |
| 1.3.6.1.4.1.546.11.1.1.2 | ColumnlogMonitorLogFile | read-write | mandatory | The name of the log file to scan for pattern matches. This variable must name a valid log filename. |
| 1.3.6.1.4.1.546.11.1.1.3 | ColumnlogMonitorRegularExpression | read-write | mandatory | The display string representation of the regular expression to match in the corresponding log file. Valid regular expressions are those as defined in ed(1). |
| 1.3.6.1.4.1.546.11.1.1.4 | ColumnlogMonitorNumberTraps | read-only | mandatory | The number of traps sent by the agent on behalf of this entry. One trap PDU message is sent for each match the agent detects in the corresponding log file (if … |
| 1.3.6.1.4.1.546.11.1.1.5 | ColumnlogMonitorLastTrap | read-only | mandatory | The time (based on sysUpTime) at which the agent last sent a trap for this entry. Alternatively, it is the time at which the last pattern match occurred. |
| 1.3.6.1.4.1.546.11.1.1.6 | ColumnlogMonitorLastMatch | read-only | mandatory | The last log file entry that matched the logMonitorRegularExpression. Each time a match occurs, this variable is updated. |
| 1.3.6.1.4.1.546.11.1.1.7 | ColumnlogMonitorStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.11.1.1.8 | ColumnlogMonitorLogFileSize | read-only | mandatory | The size in bytes of the log file at time of last sample. By querying this value, one can tell if the log file is growing. |
| 1.3.6.1.4.1.546.11.1.1.9 | ColumnlogMonitorLogFileLastUpdate | read-only | mandatory | The time (based on sysUpTime) that the log file was last modifed by the system or application(s) writing to this file. Monitoring this value can indicate if th… |
| 1.3.6.1.4.1.546.11.1.1.10 | ColumnlogMonitorDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.11.1.1.11 | ColumnlogMonitorAction | read-write | mandatory | A textual string specifying the command to be executed upon finding a match. |
| 1.3.6.1.4.1.546.11.1.1.12 | ColumnlogMonitorFlags | read-write | mandatory | The flags field dictates the behavior of each logMonitorEntry. Each bit in the integer represents the toggling of an option. The flags field of 0x00 is enables… |
| 1.3.6.1.4.1.546.11.1.1.13 | ColumnlogMonitorMatches | read-only | mandatory | The number of logfile entries matching the regular expression; this value is incremented regardless of whether Traps are sent for this entry or not. Polling th… |
| 1.3.6.1.4.1.546.11.2 | ScalarlogmonUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used logfile monitor index number. It can be used for logfile monitor table row creation optimization. |
| 1.3.6.1.4.1.546.11.3 | ScalarlogmonMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with logmonMatchIndex can be used to quickly determine the index number corresponding to a particular entry descripti… |
| 1.3.6.1.4.1.546.11.4 | ScalarlogmonMatchIndex | read-only | mandatory | See description for logmonMatchDescr. |
| 1.3.6.1.4.1.546.12 | NodediskGroup | |||
| 1.3.6.1.4.1.546.12.1 | TablediskStatsTable | not-accessible | mandatory | Table containing disk I/O stat entries; each entry provides the latest disk statistics for one disk. The agent periodically stats the system data structures fo… |
| 1.3.6.1.4.1.546.12.1.1 | RowdiskStatsEntry | not-accessible | mandatory | An entry in the diskStatsTable. |
| 1.3.6.1.4.1.546.12.1.1.1 | ColumndiskStatsIndex | read-only | mandatory | An index that uniquely identifies an entry in the diskStatsTable. |
| 1.3.6.1.4.1.546.12.1.1.2 | ColumndiskStatsQueueLength | read-only | mandatory | The average number of operations waiting in the disk's service queue over the last measurement period. |
| 1.3.6.1.4.1.546.12.1.1.3 | ColumndiskStatsServiceTime | read-only | mandatory | The average service time in milliseconds for operations served on this disk over the last measurement period. This could be expressed as: disk-busy-time / numb… |
| 1.3.6.1.4.1.546.12.1.1.4 | ColumndiskStatsUtilization | read-only | mandatory | The utilization rate (percentage utilization) for this disk over the last measurement period. This could also be expressed as: (disk-busy-time / elapsed-time) … |
| 1.3.6.1.4.1.546.12.1.1.5 | ColumndiskStatsKBytesTransferred | read-only | mandatory | The number of KBytes transferred to/from this disk. |
| 1.3.6.1.4.1.546.12.1.1.6 | ColumndiskStatsTransfers | read-only | mandatory | The number of transfer operations to/from this disk. |
| 1.3.6.1.4.1.546.12.1.1.7 | ColumndiskStatsReads | read-only | mandatory | The number of read operations from this disk. |
| 1.3.6.1.4.1.546.12.1.1.8 | ColumndiskStatsWrites | read-only | mandatory | The number of write operations to this disk. |
| 1.3.6.1.4.1.546.12.1.1.9 | ColumndiskStatsHostmibDevTableIndex | read-only | mandatory | The index of this disk device in the device table of the Host Resources MIB. |
| 1.3.6.1.4.1.546.12.1.1.10 | ColumndiskStatsLastUpdate | read-only | mandatory | The time in SNMP Time Ticks of the last update of this diskStatsTable entry. |
| 1.3.6.1.4.1.546.12.1.1.11 | ColumndiskStatsKBytesXferStr | read-only | mandatory | Number of KBbytes transfered to/from this disk in ascii string format so that 64-bit values can be passed w/o having to go through high/low order word calculat… |
| 1.3.6.1.4.1.546.12.1.1.12 | ColumndiskStatsTransfersStr | read-only | mandatory | Number of transfer operations to/from this disk in ascii string format so that 64-bit values can be passed w/o having to go through high/low order word calcula… |
| 1.3.6.1.4.1.546.12.1.1.13 | ColumndiskStatsReadsStr | read-only | mandatory | The number of read operations from this disk in ascii string format so that 64-bit values can be passed w/o having to go through high/low order word calculatio… |
| 1.3.6.1.4.1.546.12.1.1.14 | ColumndiskStatsWritesStr | read-only | mandatory | The number of write operations to this disk in ascii string format so that 64-bit values can be passed w/o having to go through high/low order word calculation… |
| 1.3.6.1.4.1.546.12.1.1.15 | ColumndiskStatsKBytesXferHi | read-only | mandatory | High-order 32-bits of diskStatsKBytesTransferred if the underlying system supports 64-bit disk stats; zero otherwise. Recovering the 64-bit counter is as simpl… |
| 1.3.6.1.4.1.546.12.1.1.16 | ColumndiskStatsXferOpsHi | read-only | mandatory | High-order 32-bits of diskStatsTransfers if the underlying system supports 64-bit disk stats; zero otherwise. Recovering the 64-bit counter is as simple as: di… |
| 1.3.6.1.4.1.546.12.1.1.17 | ColumndiskStatsReadsHi | read-only | mandatory | High-order 32-bits of diskStatsReads if the underlying system supports 64-bit disk stats; zero otherwise. Recovering the 64-bit counter is as simple as: diskSt… |
| 1.3.6.1.4.1.546.12.1.1.18 | ColumndiskStatsWritesHi | read-only | mandatory | High-order 32-bits of diskStatsWrites if the underlying system supports 64-bit disk stats; zero otherwise. Recovering the 64-bit counter is as simple as: diskS… |
| 1.3.6.1.4.1.546.13 | NodecpuGroup | |||
| 1.3.6.1.4.1.546.13.1 | TablecpuStatsTable | not-accessible | mandatory | This table provides per-cpu statistics and counters; the agent periodically (approximately every 60 seconds) updates data contained in this table. By periodica… |
| 1.3.6.1.4.1.546.13.1.1 | RowcpuStatsEntry | not-accessible | mandatory | An entry in the cpuStatsTable |
| 1.3.6.1.4.1.546.13.1.1.1 | ColumncpuStatsIndex | read-only | mandatory | An index that uniquely identifies an entry in the cpuStatsTable. |
| 1.3.6.1.4.1.546.13.1.1.2 | ColumncpuStatsDescr | read-only | mandatory | The type of CPU for which statistics are reported. On Solaris 2.x, this description also includes the CPU's clock speed. |
| 1.3.6.1.4.1.546.13.1.1.3 | ColumncpuStatsIdle | read-only | mandatory | The total number of 'ticks' spent by this CPU in Idle mode. This variable is not supported by NT. This value may wrap 32-bit counter. |
| 1.3.6.1.4.1.546.13.1.1.4 | ColumncpuStatsUser | read-only | mandatory | The total number of 'ticks' spent by this CPU in User mode. This value may wrap 32-bit counter. |
| 1.3.6.1.4.1.546.13.1.1.5 | ColumncpuStatsSys | read-only | mandatory | The total number of 'ticks' spent by this CPU in Kernel or system mode. This value may wrap a 32-bit counter. |
| 1.3.6.1.4.1.546.13.1.1.6 | ColumncpuStatsWait | read-only | mandatory | The total number of 'ticks' spent by this CPU in Wait mode. Wait mode is that time spent waiting on I/O or swap. It may wrap a 32-bit counter. |
| 1.3.6.1.4.1.546.13.1.1.7 | ColumncpuStatsLastUpdate | read-only | mandatory | The time (based on sysUpTime) that the counters for this CPU were last updated. Because these values are cached periodically by the agent, the time of last upd… |
| 1.3.6.1.4.1.546.13.1.1.8 | ColumncpuStatsIdlePercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPU was idle. |
| 1.3.6.1.4.1.546.13.1.1.9 | ColumncpuStatsUserPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPU was executing in user mode. |
| 1.3.6.1.4.1.546.13.1.1.10 | ColumncpuStatsSysPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPU was executing the kernel or operating system. |
| 1.3.6.1.4.1.546.13.1.1.11 | ColumncpuStatsWaitPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPU was waiting for I/O. This object may not be supported by the underlying operating system. |
| 1.3.6.1.4.1.546.13.2 | ScalarcpuTotalIdle | read-only | mandatory | The total number of 'ticks' spent by all CPUs in Idle mode. This variable is not supported by NT. This value may wrap 32-bit counter. |
| 1.3.6.1.4.1.546.13.3 | ScalarcpuTotalUser | read-only | mandatory | The total number of 'ticks' spent by all CPUs in User mode. This value may wrap 32-bit counter. |
| 1.3.6.1.4.1.546.13.4 | ScalarcpuTotalSys | read-only | mandatory | The total number of 'ticks' spent by all CPUs in Kernel or system mode. This value may wrap a 32-bit counter. |
| 1.3.6.1.4.1.546.13.5 | ScalarcpuTotalWait | read-only | mandatory | The total number of 'ticks' spent by all CPUs in Wait mode. Wait mode is that time spent waiting on I/O or swap. It may wrap a 32-bit counter. |
| 1.3.6.1.4.1.546.13.6 | ScalarcpuTotalLastUpdate | read-only | mandatory | The time (based on sysUpTime) that these counters were last updated. Because these values are cached periodically by the agent, the time of last update is impo… |
| 1.3.6.1.4.1.546.13.7 | ScalarcpuTotalIdlePercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPUs were idle. |
| 1.3.6.1.4.1.546.13.8 | ScalarcpuTotalUserPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPUs were executing in user mode. |
| 1.3.6.1.4.1.546.13.9 | ScalarcpuTotalSysPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPUs were executing the kernel or operating system. |
| 1.3.6.1.4.1.546.13.10 | ScalarcpuTotalWaitPercent | read-only | mandatory | The percentage of time (over the sample period) that the system's CPUs were waiting for I/O. This object may not be supported by the underlying operating syste… |
| 1.3.6.1.4.1.546.14 | NodeextensionGroup | |||
| 1.3.6.1.4.1.546.14.1 | ScalarextensionDomainName | read-only | mandatory | The Domain Name Service domain name for this host. This value is obtained by a shell script included with the agent distribution. |
| 1.3.6.1.4.1.546.14.2 | ScalarextensionNisServer | read-only | mandatory | The NIS (YP) server currently being used by this host. This value is obtained by a shell script included with the agent distribution. |
| 1.3.6.1.4.1.546.14.3 | ScalarextensionMotd | read-only | mandatory | The Message Of The Day. Return the first line of the /etc/motd file on this host. This value is obtained by a shell script included with the agent distribution. |
| 1.3.6.1.4.1.546.14.31 | ScalarextensionPing | read-write | mandatory | This variable allows the agent to support remote Ping operations. This functionality is useful for remote troubleshooting of routing problems. Sets to this obj… |
| 1.3.6.1.4.1.546.15 | NodeprocessMonitor | |||
| 1.3.6.1.4.1.546.15.1 | TableprocessMonTable | not-accessible | mandatory | The process monitor table used for monitoring single instances of processes. |
| 1.3.6.1.4.1.546.15.1.1 | RowprocessMonEntry | not-accessible | mandatory | A process monitor entry; one entry per process to monitor. |
| 1.3.6.1.4.1.546.15.1.1.1 | ColumnpmonIndex | read-only | mandatory | A unique value for entry in the processMonTable. The index values in the processMonTable may not necessarily be contiguous, but are unique. |
| 1.3.6.1.4.1.546.15.1.1.2 | ColumnpmonDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.15.1.1.3 | ColumnpmonInterval | read-write | mandatory | The interval, in seconds, between successive samples by the agent. It must be a multiple of 30 seconds. For example, if a manager wanted to sample the value of… |
| 1.3.6.1.4.1.546.15.1.1.4 | ColumnpmonSampleType | read-write | mandatory | The type of sampling performed on the object represented by this entry. For example, for sampling and monitoring objects of type Counter, setting the appropria… |
| 1.3.6.1.4.1.546.15.1.1.5 | ColumnpmonAttribute | read-write | mandatory | The process attribute being monitored. These enumerated values map directly to columns in the Empire Process table. |
| 1.3.6.1.4.1.546.15.1.1.6 | ColumnpmonCurrVal | read-only | mandatory | This variable represents the current value of the object being monitored as last sampled by the agent. If the pmonSampleType is deltaValue(2), then this value … |
| 1.3.6.1.4.1.546.15.1.1.7 | ColumnpmonOperator | read-write | mandatory | |
| 1.3.6.1.4.1.546.15.1.1.8 | ColumnpmonValue | read-write | mandatory | The value against which the agent compares the current value. This value represents a threshold. Its semantics are not interpreted by the agent; therefore, the… |
| 1.3.6.1.4.1.546.15.1.1.9 | ColumnpmonLastCall | read-only | mandatory | The time (based on sysUpTime) at which the agent last called or sampled the object being monitored. If the object has not yet been sampled, 0 is returned. |
| 1.3.6.1.4.1.546.15.1.1.10 | ColumnpmonNumTraps | read-only | mandatory | The number of traps sent for this particular monitor entry. This value indicates how many times the agent has evaluated this entry's expression as true. Recall… |
| 1.3.6.1.4.1.546.15.1.1.11 | ColumnpmonLastTrap | read-only | mandatory | The time (based on sysUpTime) at which the agent last sent a trap for this Monitor Table entry. If no traps have been sent, the value is 0. |
| 1.3.6.1.4.1.546.15.1.1.12 | ColumnpmonFlags | read-write | mandatory | The flags field dictates the behavior of each processMonEntry. Each bit in the integer represents the toggling of an option. The flags field of 0x00 is enables… |
| 1.3.6.1.4.1.546.15.1.1.13 | ColumnpmonAction | read-write | mandatory | A string specifying the command to be executed upon finding a match. |
| 1.3.6.1.4.1.546.15.1.1.14 | ColumnpmonRegExpr | read-write | mandatory | The regular expression to use for matching processes by name or NT services by name |
| 1.3.6.1.4.1.546.15.1.1.15 | ColumnpmonMinValue | read-only | mandatory | The minimum sampled value or 0 upon initialization |
| 1.3.6.1.4.1.546.15.1.1.16 | ColumnpmonMaxValue | read-only | mandatory | The maximum sampled value or 0 upon initialization |
| 1.3.6.1.4.1.546.15.1.1.17 | ColumnpmonCurrentPID | read-write | mandatory | The PID of the process being monitored |
| 1.3.6.1.4.1.546.15.1.1.18 | ColumnpmonRowStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.15.1.1.19 | ColumnpmonNumEvents | read-only | mandatory | The number of events for this process monitor entry. Events do not necessarily imply traps because Traps may be turned off for this row via flags setting. |
| 1.3.6.1.4.1.546.15.2 | ScalarpmonUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used processMonitorTable index number. It can be used for processMonitor table row creation optimization. |
| 1.3.6.1.4.1.546.15.3 | ScalarpmonMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with pmonMatchIndex can be used to quickly determine the index number corresponding to a particular entry description… |
| 1.3.6.1.4.1.546.15.4 | ScalarpmonMatchIndex | read-only | mandatory | See description for pmonMatchDescr. |
| 1.3.6.1.4.1.546.15.10 | TableprocessGroupMonTable | not-accessible | mandatory | The process group monitor table used for monitoring arbitrary groups of processes. |
| 1.3.6.1.4.1.546.15.10.1 | RowprocessGroupMonEntry | not-accessible | mandatory | A process group monitor entry; one entry per group of processes to monitor. |
| 1.3.6.1.4.1.546.15.10.1.1 | ColumnpgmonIndex | read-only | mandatory | A unique value for entry in the processGroupMonTable. The index values in the processGroupMonTable may not necessarily be contiguous, but are unique. |
| 1.3.6.1.4.1.546.15.10.1.2 | ColumnpgmonDescr | read-write | mandatory | A textual description of this entry possibly identifying the purpose of this entry and who created it. |
| 1.3.6.1.4.1.546.15.10.1.3 | ColumnpgmonInterval | read-write | mandatory | The interval, in seconds, between successive samples by the agent. It must be a multiple of 30 seconds. For example, if a manager wanted to sample the value of… |
| 1.3.6.1.4.1.546.15.10.1.4 | ColumnpgmonProcRegExpr | read-write | mandatory | The regular expression to use for matching processes by name |
| 1.3.6.1.4.1.546.15.10.1.5 | ColumnpgmonFlags | read-write | mandatory | The flags field dictates the behavior of each processGroupMonEntry. Each bit in the integer represents the toggling of an option. The flags field of 0x00 is en… |
| 1.3.6.1.4.1.546.15.10.1.6 | ColumnpgmonNumProcs | read-only | mandatory | The current number of processes in the process group being tracked by this table entry. A process belongs to the process-group if its name (and possibly args) … |
| 1.3.6.1.4.1.546.15.10.1.7 | ColumnpgmonPIDList | read-only | mandatory | A list of the numeric PIDs in this process group separated by space character. |
| 1.3.6.1.4.1.546.15.10.1.8 | ColumnpgmonStatusList | read-only | mandatory | A list of the process states in this process group separated by space character. See processStateInt for explanation of the state of a process. Entries in the … |
| 1.3.6.1.4.1.546.15.10.1.9 | ColumnpgmonAction | read-write | mandatory | A string specifying the command to be executed upon process group event. |
| 1.3.6.1.4.1.546.15.10.1.10 | ColumnpgmonNumEvents | read-only | mandatory | The number of events for this process group table entry. Events do not necessarily imply traps because Traps may be turned off for this row via flags setting. |
| 1.3.6.1.4.1.546.15.10.1.11 | ColumnpgmonNumTraps | read-only | mandatory | The number Traps sent for this process group table entry. |
| 1.3.6.1.4.1.546.15.10.1.12 | ColumnpgmonLastTrap | read-only | mandatory | The time (based on sysUpTime) at which the agent last sent a trap for this entry. If no traps have been sent, the value is 0. |
| 1.3.6.1.4.1.546.15.10.1.13 | ColumnpgmonRowStatus | read-write | mandatory | The status of this entry. This variable is equivalent in semantics to the V2 SMI RowStatus textual-convention (see RFC 1443). A value of active(1) indicates th… |
| 1.3.6.1.4.1.546.15.10.1.14 | ColumnpgmonRSS | read-only | mandatory | The combined resident set size of the group of processes. (See processRSS). RSS for each process in the group is summed each interval and stored in this MIB va… |
| 1.3.6.1.4.1.546.15.10.1.15 | ColumnpgmonSize | read-only | mandatory | The cobmined size of text/data/stack segments of the group of processes. (See processSize) Size for each process in the group is summed each interval and store… |
| 1.3.6.1.4.1.546.15.10.1.16 | ColumnpgmonThreadCount | read-only | mandatory | The total number of threads for the group of processes. (See processNumThreads) The number of threads running in each process in the group is summed each inter… |
| 1.3.6.1.4.1.546.15.10.1.17 | ColumnpgmonMEM | read-only | mandatory | The total percentage of real memory used by the processes in this group. The percentage of memory used by each process in the group is summed each interval and… |
| 1.3.6.1.4.1.546.15.10.1.18 | ColumnpgmonInBlks | read-only | mandatory | Number of blocks of data input by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individu… |
| 1.3.6.1.4.1.546.15.10.1.19 | ColumnpgmonOutBlks | read-only | mandatory | Number of blocks of data output by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individ… |
| 1.3.6.1.4.1.546.15.10.1.20 | ColumnpgmonMsgsSent | read-only | mandatory | Number of messages sent by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individual proc… |
| 1.3.6.1.4.1.546.15.10.1.21 | ColumnpgmonMsgsRecv | read-only | mandatory | Number of messages received by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individual … |
| 1.3.6.1.4.1.546.15.10.1.22 | ColumnpgmonSysCalls | read-only | mandatory | Number of system calls invoked by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individu… |
| 1.3.6.1.4.1.546.15.10.1.23 | ColumnpgmonMinorPgFlts | read-only | mandatory | Number of minor page faults incurred by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an in… |
| 1.3.6.1.4.1.546.15.10.1.24 | ColumnpgmonMajorPgFlts | read-only | mandatory | Number of major page faults incurred by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an in… |
| 1.3.6.1.4.1.546.15.10.1.25 | ColumnpgmonNumSwaps | read-only | mandatory | Number of times processes in this gropu have been swapped. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an individu… |
| 1.3.6.1.4.1.546.15.10.1.26 | ColumnpgmonVolCtx | read-only | mandatory | Number of voluntary context switches incurred by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even af… |
| 1.3.6.1.4.1.546.15.10.1.27 | ColumnpgmonInvolCtx | read-only | mandatory | Number of involuntary context switches incurred by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even … |
| 1.3.6.1.4.1.546.15.10.1.28 | ColumnpgmonCPUSecs | read-only | mandatory | Number of seconds of CPU time used by processes in this group. SystemEDGE maintains a 'history' of group membership and tracks process stats even after an indi… |
| 1.3.6.1.4.1.546.15.10.1.29 | ColumnpgmonMatchUser | read-write | mandatory | If set to a valid username, SystemEDGE will match running processes by username in addition to any process name regular expression. Only valid on UNIX. |
| 1.3.6.1.4.1.546.15.10.1.30 | ColumnpgmonMatchGroup | read-write | mandatory | If set to a valid groupname, SystemEDGE will match running processes by group name in addition to any process name regular expression and username matching. On… |
| 1.3.6.1.4.1.546.15.11 | ScalarpgmonUnusedIndex | read-only | mandatory | An SNMP Get of this MIB object returns an un-used processGroupMonitorTable index number. It can be used for processMonitor table row creation optimization. |
| 1.3.6.1.4.1.546.15.12 | ScalarpgmonMatchDescr | read-write | mandatory | This MIB object, when used in conjunction with pgmonMatchIndex can be used to quickly determine the index number corresponding to a particular entry descriptio… |
| 1.3.6.1.4.1.546.15.13 | ScalarpgmonMatchIndex | read-only | mandatory | See description for pgmonMatchDescr. |
| 1.3.6.1.4.1.546.16 | Nodeapplications | |||
| 1.3.6.1.4.1.546.16.1 | NodemsExchange | |||
| 1.3.6.1.4.1.546.16.2 | NodemsIIS | |||
| 1.3.6.1.4.1.546.16.3 | NodeapacheSrv | |||
| 1.3.6.1.4.1.546.16.4 | Nodeoracledb | |||
| 1.3.6.1.4.1.546.16.5 | Nodesybase | |||
| 1.3.6.1.4.1.546.16.6 | NodesvcRsp | |||
| 1.3.6.1.4.1.546.16.7 | NodetopProcs | |||
| 1.3.6.1.4.1.546.16.8 | NodesqlServer | |||
| 1.3.6.1.4.1.546.16.10 | Nodedomino | |||
| 1.3.6.1.4.1.546.16.11 | Nodesurveyor | |||
| 1.3.6.1.4.1.546.16.12 | NodemosMod | |||
| 1.3.6.1.4.1.546.16.13 | Nodeccmmod | |||
| 1.3.6.1.4.1.546.16.14 | Nodesiebelmod | |||
| 1.3.6.1.4.1.546.16.16 | Nodetestplugin | |||
| 1.3.6.1.4.1.546.16.17 | Nodefirewall | |||
| 1.3.6.1.4.1.546.16.18 | Nodedirmwp | |||
| 1.3.6.1.4.1.546.16.100 | Nodecustom |