EQUIPE-SYSTEM-MIB
165 objects
This is the Equipe system MIB module.
Imported Objects
| RFC1155-SMI | enterprises TimeTicks |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5022 | Nodeequipe | |||
| 1.3.6.1.4.1.5022.1 | IdentityeqSystemMib | This is the Equipe system MIB module. | ||
| 1.3.6.1.4.1.5022.1.1 | NodeeqSysProducts | |||
| 1.3.6.1.4.1.5022.1.1.1 | NodeeqSysProductE3200 | |||
| 1.3.6.1.4.1.5022.1.2 | NodeeqSysSystemGrp | |||
| 1.3.6.1.4.1.5022.1.2.1 | NodeeqSysSystem | |||
| 1.3.6.1.4.1.5022.1.2.1.1 | ScalareqSysSystemId | read-only | current | The unique value assigned to each chassis at manufacturing time. |
| 1.3.6.1.4.1.5022.1.2.1.2 | ScalareqSysPhysEntLastChangeTime | read-only | current | The value of sysUpTime when the last physical entity change event occurred (e.g. a module was inserted into the system). |
| 1.3.6.1.4.1.5022.1.2.2 | NodeeqSysConfig | |||
| 1.3.6.1.4.1.5022.1.2.2.1 | ScalareqSysCfgCopyConfigFileAction | read-write | current | A read of this object always returns the value other(1). Setting this object to copyCfgFile(2) will initiate a save of the current configuration and a copy of … |
| 1.3.6.1.4.1.5022.1.2.2.2 | ScalareqSysCfgCopyConfigFileStatus | read-write | current | This object is used to monitor the progress of a request to save and copy the current config file on the local filesystem. The user may also do a set to reset … |
| 1.3.6.1.4.1.5022.1.2.2.3 | ScalareqSysCfgSavedFilename | read-only | current | The name assigned to the saved config file. |
| 1.3.6.1.4.1.5022.1.2.3 | TableeqEidReqTable | not-accessible | current | This table is used to get equipe id values. |
| 1.3.6.1.4.1.5022.1.2.3.1 | RoweqEidReqEntry | not-accessible | current | An eid alloc entry. |
| 1.3.6.1.4.1.5022.1.2.3.1.1 | ColumneqEidReqIndex | read-only | current | The unique value to identify this entry. |
| 1.3.6.1.4.1.5022.1.2.3.1.2 | ColumneqEidReqUser | read-create | current | A textual string to identify the owner of this entry. |
| 1.3.6.1.4.1.5022.1.2.3.1.3 | ColumneqEidReqCount | read-create | current | The count of equipe id's requested. |
| 1.3.6.1.4.1.5022.1.2.3.1.4 | ColumneqEidReqCountAlloc | read-only | current | The count of equipe id's actually allocated. |
| 1.3.6.1.4.1.5022.1.2.3.1.5 | ColumneqEidReqAction | read-create | current | A read of this object always returns the value other(1). Setting this object to alloc(2) will cause the agent to allocate new eid's. The number of eid's to all… |
| 1.3.6.1.4.1.5022.1.2.3.1.6 | ColumneqEidReqActionStatus | read-only | current | The result of the action requested. |
| 1.3.6.1.4.1.5022.1.2.3.1.7 | ColumneqEidReqRowStatus | read-create | current | This object is used to create and delete entries in this table. |
| 1.3.6.1.4.1.5022.1.2.4 | TableeqEidResTable | not-accessible | current | This table contains entries for allocated eid's. |
| 1.3.6.1.4.1.5022.1.2.4.1 | RoweqEidResEntry | not-accessible | current | An eid result entry. |
| 1.3.6.1.4.1.5022.1.2.4.1.1 | ColumneqEidResIndex | read-only | current | The id value to identify this entry. |
| 1.3.6.1.4.1.5022.1.2.4.1.2 | ColumneqEidResData | read-only | current | An array holding the allocated eid values. |
| 1.3.6.1.4.1.5022.1.3 | NodeeqSysModuleGrp | |||
| 1.3.6.1.4.1.5022.1.3.1 | NodeeqSysModule | |||
| 1.3.6.1.4.1.5022.1.3.1.1 | TableeqModuleTable | not-accessible | current | This table contains module info. |
| 1.3.6.1.4.1.5022.1.3.1.1.1 | RoweqModuleEntry | not-accessible | current | A module entry. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.1 | ColumneqModuleEid | read-only | current | The unique id assigned to the module. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.2 | ColumneqModuleShelfId | read-only | current | The shelf id in which this module is located. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.3 | ColumneqModuleSlotId | read-only | current | The slot id in which this module is located. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.4 | ColumneqModuleType | read-only | current | The type of module. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.5 | ColumneqModuleHwVersion | read-only | current | The hardware version of the module. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.6 | ColumneqModuleStatus | read-only | current | The module status. |
| 1.3.6.1.4.1.5022.1.3.1.1.1.7 | ColumneqModuleAction | read-write | current | A read of this object always returns the value other(1). Setting this to reset(2) causes the module to be reset. |
| 1.3.6.1.4.1.5022.1.3.1.2 | TableeqModuleHealthTable | not-accessible | current | This table contains module health info. |
| 1.3.6.1.4.1.5022.1.3.1.2.1 | RoweqModuleHealthEntry | not-accessible | current | A module health entry. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.1 | ColumneqModuleHealthStatus | read-only | current | The module health status. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.2 | ColumneqModuleMemTotal | read-only | current | The total amount of sdram memory available on the module in megabytes. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.3 | ColumneqModuleMemUsed | read-only | current | The amount of used sdram memory on the module in megabytes. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.4 | ColumneqModuleMemUsedPercent | read-only | current | The amount of used sdram memory expressed as a percentage of total available memory. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.5 | ColumneqModuleTemp | read-only | current | The temp of the module in degrees centigrades. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.6 | ColumneqModuleCpuUtil | read-only | current | The cpu utilization of the module as a percentage. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.7 | ColumneqModuleFeedStatusA | read-only | current | The module power feed A status. |
| 1.3.6.1.4.1.5022.1.3.1.2.1.8 | ColumneqModuleFeedStatusB | read-only | current | The module power feed B status. |
| 1.3.6.1.4.1.5022.1.3.1.3 | TableeqHardDiskTable | not-accessible | current | The hard disk status table. |
| 1.3.6.1.4.1.5022.1.3.1.3.1 | RoweqHardDiskEntry | not-accessible | current | A hard disk entry. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.1 | ColumneqHardDiskEid | read-only | current | The unique id assigned to the hard disk. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.2 | ColumneqHardDiskShelfId | read-only | current | The shelf id in which this hard disk is located. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.3 | ColumneqHardDiskSlotId | read-only | current | The slot id in which this hard disk is located. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.4 | ColumneqHardDiskCapacity | read-only | current | The hard disk capacity in megabytes. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.5 | ColumneqHardDiskUsed | read-only | current | The percentage of hard disk in use. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.6 | ColumneqHardDiskUsedHiMark | read-only | current | The percentage of hard disk in use which, when crossed, will trigger an eqHardDiskUsedHiMark trap to be generated. |
| 1.3.6.1.4.1.5022.1.3.1.3.1.7 | ColumneqHardDiskUsedLowMark | read-only | current | The percentage of hard disk in use which, when crossed, will trigger an eqHardDiskLowMark trap to be generated. |
| 1.3.6.1.4.1.5022.1.3.1.4 | TableeqFanUnitTable | not-accessible | current | The fan unit status table. |
| 1.3.6.1.4.1.5022.1.3.1.4.1 | RoweqFanUnitEntry | not-accessible | current | A fan unit entry. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.1 | ColumneqFanUnitEid | read-only | current | The unique id assigned to the fan unit. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.2 | ColumneqFanUnitShelfId | read-only | current | The shelf id in which this fan unit is located. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.3 | ColumneqFanUnitSlotId | read-only | current | The slot id in which this fan unit is located. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.4 | ColumneqFanUnitRpm | read-only | current | The current rpm of this fan unit. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.5 | ColumneqFanUnitRpmHiMark | read-only | current | The fan unit rpm which, when crossed, will trigger an eqFanUnitUsedHiMark trap to be generated. |
| 1.3.6.1.4.1.5022.1.3.1.4.1.6 | ColumneqFanUnitRpmLowMark | read-only | current | The fan unit rpm which, when crossed, will trigger an eqFanUnitUsedLowMark trap to be generated. |
| 1.3.6.1.4.1.5022.1.3.1.5 | TableeqModuleRedTable | not-accessible | current | This table contains module redundancy info. |
| 1.3.6.1.4.1.5022.1.3.1.5.1 | RoweqModuleRedEntry | not-accessible | current | A module redundancy entry. |
| 1.3.6.1.4.1.5022.1.3.1.5.1.1 | ColumneqModuleRedEid | read-only | current | The unique id assigned to the module. |
| 1.3.6.1.4.1.5022.1.3.1.5.1.2 | ColumneqModuleRedAdminRole | read-only | current | The module's configured redundancy role. |
| 1.3.6.1.4.1.5022.1.3.1.5.1.3 | ColumneqModuleRedOperRole | read-only | current | The module's current redundancy role. |
| 1.3.6.1.4.1.5022.1.3.1.5.1.4 | ColumneqModuleRedPeerId | read-only | current | The id of the module that is a peer to this module. The peer can be either a primary or a backup module. A value of zero indicates no peer module. |
| 1.3.6.1.4.1.5022.1.3.1.5.1.5 | ColumneqModuleRedAction | read-write | current | A read of this object always returns the value other(1). Setting this to switchRole(2) causes the module to switch role with it's peer module. |
| 1.3.6.1.4.1.5022.1.3.1.6 | TableeqStratumCentTable | not-accessible | current | This table contains the central stratum timing subsystem info. |
| 1.3.6.1.4.1.5022.1.3.1.6.1 | RoweqStratumCentEntry | not-accessible | current | A central stratum timing subsystem entry. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.1 | ColumneqStratumCentEid | read-only | current | The unique id assigned to the module containing the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.2 | ColumneqStratumCentStatus | read-only | current | The status of the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.3 | ColumneqStratumCentRedStatus | read-only | current | The redundancy status of the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.4 | ColumneqStratumCentLevel | read-only | current | The level of the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.5 | ColumneqStratumCentPrimaryRefStatus | read-only | current | The primary reference status of the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.6 | ColumneqStratumCentSecondaryRefStatus | read-only | current | The secondary reference status of the central stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.6.1.7 | ColumneqStratumCentStatusAction | read-write | current | This object is used to change the status of the central stratum timing subsystem. A read of this object always returns the value other(1). |
| 1.3.6.1.4.1.5022.1.3.1.6.1.8 | ColumneqStratumCentRedAction | read-write | current | This object is used to change the redundancy status of the central stratum timing subsystem. A read of this object always returns the value other(1). |
| 1.3.6.1.4.1.5022.1.3.1.7 | TableeqStratumLocalTable | not-accessible | current | This table contains the local stratum timing subsystem info. |
| 1.3.6.1.4.1.5022.1.3.1.7.1 | RoweqStratumLocalEntry | not-accessible | current | A local stratum timing subsystem entry. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.1 | ColumneqStratumLocalEid | read-only | current | The unique id assigned to the module containing the local stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.2 | ColumneqStratumLocalInputA1Status | read-only | current | The input A1 status of the local stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.3 | ColumneqStratumLocalInputA2Status | read-only | current | The input A2 status of the local stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.4 | ColumneqStratumLocalInputB1Status | read-only | current | The input B1 status of the local stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.5 | ColumneqStratumLocalInputB2Status | read-only | current | The input B2 status of the local stratum timing subsystem. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.6 | ColumneqStratumLocalInputUsed | read-only | current | This object indicates which of the two inputs on the local startum timing subsystem is currently being used. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.7 | ColumneqStratumLocalRecoveredRefStatus | read-only | current | This object indicates if this local startum timing subsystem is providing a reference source to either of the two inputs. |
| 1.3.6.1.4.1.5022.1.3.1.7.1.8 | ColumneqStratumLocalStatusAction | read-write | current | This object is used to change the input being used by the local stratum timing subsystem. A read of this object always returns the value other(1). |
| 1.3.6.1.4.1.5022.1.4 | NodeeqSysFaultGrp | |||
| 1.3.6.1.4.1.5022.1.4.1 | NodeeqSysFault | |||
| 1.3.6.1.4.1.5022.1.4.1.1 | TableeqFaultTable | not-accessible | current | This table contains fault info. |
| 1.3.6.1.4.1.5022.1.4.1.1.1 | RoweqFaultEntry | not-accessible | current | A fault entry. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.1 | ColumneqFaultDomain | read-only | current | The domain of the entity handling the fault. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.2 | ColumneqFaultHandle | read-only | current | The handle of the fault within the domain. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.3 | ColumneqFaultClass | read-only | current | The class field of the fault descriptor. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.4 | ColumneqFaultSubclass | read-only | current | The subclass field of the fault descriptor. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.5 | ColumneqFaultType | read-only | current | The type field of the fault descriptor. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.6 | ColumneqFaultInstance | read-only | current | The instance field of the fault descriptor. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.7 | ColumneqFaultSeverity | read-only | current | The severity of the fault. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.8 | ColumneqFaultScope | read-only | current | The scope in which the fault was handled. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.9 | ColumneqFaultSwlm | read-create | current | A textual string to identify the type of swlm if scope is swlm. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.10 | ColumneqFaultModule | read-only | current | The EID of the physical module on which the fault occurred. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.11 | ColumneqFaultTime | read-create | current | A textual string indicating the time at which the fault occurred. |
| 1.3.6.1.4.1.5022.1.4.1.1.1.12 | ColumneqFaultDetails | read-create | current | A textual string providing additional details about the fault. |
| 1.3.6.1.4.1.5022.1.5 | NodeeqSysSmsGrp | |||
| 1.3.6.1.4.1.5022.1.5.1 | NodeeqSysSms | |||
| 1.3.6.1.4.1.5022.1.5.1.1 | ScalareqReleaseNextId | read-only | current | The next available release id value. |
| 1.3.6.1.4.1.5022.1.5.1.2 | ScalareqReleaseRevert | read-write | current | Writing this initiates a revert to the default release. |
| 1.3.6.1.4.1.5022.1.5.1.3 | TableeqReleaseTable | not-accessible | current | This table contains installed software release status and control. |
| 1.3.6.1.4.1.5022.1.5.1.3.1 | RoweqReleaseEntry | not-accessible | current | A software release entry. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.1 | ColumneqReleaseId | read-only | current | A box unique number which identifies the release . |
| 1.3.6.1.4.1.5022.1.5.1.3.1.2 | ColumneqReleaseName | read-create | current | The name of the release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.3 | ColumneqReleaseVerificationStatus | read-only | current | The verification status of the release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.4 | ColumneqReleaseUpgradeScope | read-only | current | The scope of an upgrade to this release with respect to the current release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.5 | ColumneqReleaseSchemaChange | read-only | current | The state of the release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.6 | ColumneqReleaseState | read-only | current | The state of the release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.7 | ColumneqReleaseModulesVerified | read-only | current | The number of modules that have been verified. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.8 | ColumneqReleaseNumModules | read-only | current | The number of modules contained in the release. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.9 | ColumneqReleaseBadModule | read-only | current | The the name of a missing module or one with a checksum error. |
| 1.3.6.1.4.1.5022.1.5.1.3.1.10 | ColumneqReleaseCommand | read-create | current | A command to peform on the release |
| 1.3.6.1.4.1.5022.1.5.1.3.1.11 | ColumneqReleaseCommandStatus | read-create | current | The status of a command contained in eqReleaseCommand |
| 1.3.6.1.4.1.5022.1.5.1.3.1.12 | ColumneqReleaseSchemaVersion | read-only | current | The schema's version string for the release |
| 1.3.6.1.4.1.5022.1.5.1.3.1.13 | ColumneqReleaseConfigAvail | read-only | current | Indicates if the release has a config file |
| 1.3.6.1.4.1.5022.1.5.1.3.1.14 | ColumneqReleaseRowStatus | read-create | current | This object is used to create and delete entries in this table. |
| 1.3.6.1.4.1.5022.1.5.1.4 | TableeqInstallTable | not-accessible | current | This table contains the paths where a new image should be installed. |
| 1.3.6.1.4.1.5022.1.5.1.4.1 | RoweqInstallEntry | not-accessible | current | An install entry. |
| 1.3.6.1.4.1.5022.1.5.1.4.1.1 | ColumneqInstallId | read-only | current | A box unique number which identifies the installation path. |
| 1.3.6.1.4.1.5022.1.5.1.4.1.2 | ColumneqInstallPath | read-only | current | The full name of the installation path. |
| 1.3.6.1.4.1.5022.1.5.1.5 | ScalareqUpgradeState | read-only | current | The current state of an upgrade. |
| 1.3.6.1.4.1.5022.1.6 | NodeeqSysIntfGrp | |||
| 1.3.6.1.4.1.5022.1.6.1 | TableeqIntfBertTable | not-accessible | current | This table is used to initiate a Bit Error Rate Test (BERT) on a sonet port and also for reading statistics on the initiated test. |
| 1.3.6.1.4.1.5022.1.6.1.1 | RoweqIntfBertEntry | not-accessible | current | A BERT entry. |
| 1.3.6.1.4.1.5022.1.6.1.1.1 | ColumneqIntfBertEid | read-only | current | The eid assigned to the interface. |
| 1.3.6.1.4.1.5022.1.6.1.1.2 | ColumneqIntfBertGeneratorState | read-only | current | The current BERT generator state. |
| 1.3.6.1.4.1.5022.1.6.1.1.3 | ColumneqIntfBertMonitorState | read-only | current | The current BERT monitor state. A value of active(1) indicates that a BERT test is currently running. |
| 1.3.6.1.4.1.5022.1.6.1.1.4 | ColumneqIntfBertMonitorStatus | read-only | current | The BERT monitor status value. Note that this object is only valid when a BERT test is running. |
| 1.3.6.1.4.1.5022.1.6.1.1.5 | ColumneqIntfBertMonitorOutOfSyncTime | read-only | current | The total amount of time, in seconds, that the monitor has been out of synch since the BERT test was started. |
| 1.3.6.1.4.1.5022.1.6.1.1.6 | ColumneqIntfBertRequestedBitErrorCount | read-only | current | The number of bit errors the user wants inserted onto the interface. This value is used when the user issues a bit error request by a set to the eqIntfBertActi… |
| 1.3.6.1.4.1.5022.1.6.1.1.7 | ColumneqIntfBertInsertedBitErrorCount | read-only | current | The actual number of bit errors inserted onto the interface. |
| 1.3.6.1.4.1.5022.1.6.1.1.8 | ColumneqIntfBertMeasuredByteErrorCount | read-only | current | The number of byte errors measured on the interface. |
| 1.3.6.1.4.1.5022.1.6.1.1.9 | ColumneqIntfBertTestStartTime | read-only | current | The time that the test was started. |
| 1.3.6.1.4.1.5022.1.6.1.1.10 | ColumneqIntfBertTestDuration | read-only | current | The time, in seconds, that the test has been running. |
| 1.3.6.1.4.1.5022.1.6.1.1.11 | ColumneqIntfBertAction | read-write | current | A read of this object always returns the value other(1). Setting this object to insertBitError(2) inserts a bit error on the interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EqApsLineState | INTEGER { other(1), active(2), signalFail(3), signalDegrade(4), manualSwitch(5), forceSwitch(6), clear(7), lockoutOfProtect(8) } | current | Equipe APS line state values. |
| EqAtmPvcType | INTEGER { atmHardPvc(1), atmSoftPvc(2) } | current | Equipe atm pvc type values. |
| EqFaultClass | INTEGER { hardware(1), software(2) } | current | Fault Descriptor Class. |
| EqFaultScope | INTEGER { softwareLoadModule(1), module(2), chassis(3) } | current | Fault scope. |
| EqFaultSeverity | INTEGER { hard(1), soft(2) } | current | Fault severity. |
| EqIfType | INTEGER { other(1), sonetPort(2), stsPath(3), atmIntf(4), virtAtmIntf(5) } | current | Equipe interface type values. |
| EqModuleFeedStatus | INTEGER { notAvail(1), good(2), bad(3) } | current | module feed status. |
| EqModuleHealthStatus | INTEGER { good(1), marginal(2), bad(3) } | current | module health status. |
| EqModuleRedRole | INTEGER { notApplicable(1), primary(2), backup(3) } | current | module redundancy role. |
| EqModuleStatus | INTEGER { diags(1), booting(2), up(3), reset(4), failed(5), disabled(6), mismatched(7) } | current | Module status values. |
| EqModuleType | INTEGER { other(1), powerSupply(2), fanTray(3), controlProcessor(4), timingControl(5), mgmtInterface(6), processorCard(7), crossConnect(8), switchFabric(9), switchScheduler(10), universalPort16xOC3(11), universalPort8xOC12(12), universalPort16xOC12(13), universalPort4xOC48(14) } | current | Equipe system module types. |
| EqReleaseCommand | INTEGER { none(1), upgrade(2), delete(3), verify(4), boot(5), commit(6) } | current | The command to be performed on a release. |
| EqReleaseCommandStatus | INTEGER { clear(1), processing(2), done(3), error(4) } | current | The status of a command performed on a release. |
| EqReleaseConfigAvail | INTEGER { avail(1), notAvail(2) } | current | Indicates if a release has a config file. |
| EqReleaseRevert | INTEGER { revertInactive(1), revertActive(2), revertStart(3), revertAllowed(4), revertNotAllowed(5) } | current | The revert command is invoked by writing this. |
| EqReleaseSchemaChange | INTEGER { change(1), nochange(2) } | current | Indicates if an upgrade requires a schema change. |
| EqReleaseState | INTEGER { unknown(0), activeCommitted(1), active(2), committed(3), inactive(4) } | current | SW release state. |
| EqReleaseUpgradeScope | INTEGER { unknown(0), hot(1), cold(2), frosty(3) } | current | SW release upgrade scope. |
| EqReleaseVerificationStatus | INTEGER { unverified(1), verifying(2), verified(3), noPackingList(4), parseError(5), missingModule(6), checksumError(7), internalError(8), removing(9), backupNotFound(10) } | current | SW release verification status. |
| EqSeverityLevel | INTEGER { debug(1), normal(2), informational(3), warning(4), minor(5), major(6), critical(7) } | current | Equipe severity levels. |