ERI-DNX-OCTAL-HIGH-SPEED-MIB
25 objects
The ERI Enterprise MIB Module for the DNX High Speed ports.
Imported Objects
| ERI-DNX-SMC-MIB | ConnectionSpeed DecisionType devices FunctionSwitch LinkCmdStatus LinkPortAddress PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.5 | NodednxOHS | |||
| 1.3.6.1.4.1.644.2.4.2.5.0 | IdentitydnxOHSEnterprise | current | ERI DNX High Speed Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.5.0.1 | NotificationoHSConfigTrap | current | This trap is used to notify a NMS that a user has updated the Port configuration for a given High Speed Port entry. | |
| 1.3.6.1.4.1.644.2.4.2.5.1 | NodeohsConfig | |||
| 1.3.6.1.4.1.644.2.4.2.5.1.1 | TableoHSConfigTable | not-accessible | current | This is the Octal High Speed Configuration table which consists of an entry for each of the Octal High Speed card's 8 links(ports). The total number of entries… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1 | RowoHSConfigEntry | not-accessible | current | The conceptual row of the Octal High Speed Configuration table. A row in this table cannot be added or deleted, only modified using the oHSCfgCmdStatus field w… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.1 | ColumnoHSCfgPortAddr | read-only | current | This number uniquely identifies an Octal High Speed Port resource. This number will be used throughout the system to identify a unique port. The format is repr… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.2 | ColumnoHSCfgResource | read-only | current | Uniquely identifies an Octal High Speed port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource T… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.3 | ColumnoHSCfgPortName | read-write | current | This is the user friendly text name to identify the port. |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.4 | ColumnoHSCfgStatus | read-write | current | Dictates the current status of the port, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.5 | ColumnoHSCfgMode | read-write | current | The port's configured transfer mode. nxDs0 (0) Transfer rate is Kbps per channel multiplied by Ds0s in configured Connection ds0-A (1) 9.6 K mode nxDs0-Special… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.6 | ColumnoHSCfgSpeed | read-only | obsolete | Displays the configured Speed based on configured Connection. |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.7 | ColumnoHSCfgType | read-write | current | Determines the type of Interface for the High Speed port. eia232 (2) - EIA/TIA-232 Common physical layer interface standard, developed by EIA and TIA, that sup… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.8 | ColumnoHSCfgData | read-write | current | Determines the data polarity of the port. |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.9 | ColumnoHSCfgClock | read-write | current | Determines the polarity of the port's clock. |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.10 | ColumnoHSCfgNetLoop | read-write | current | Determines whether or not the port should respond to V.54 loop diagnostic codes received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.11 | ColumnoHSCfgTiming | read-write | current | Source of the port's bit rate clock. internal (0) Both the transmit and receive clocks are internal. int-ext (1) The transmit clock is internal and the receive… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.12 | ColumnoHSCfgDcd | read-write | current | The Data Carrier Detect configuration method used on this port. DCD does not apply to X.21 Port Types. forced-off (0) DCD is off forced-on (1) DCD is on track-… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.13 | ColumnoHSCfgDsr | read-write | current | The Data Set Ready configuration method used on this port. DSR does not apply to X.21 Port Types. forced-off (0) DSR signaling is off forced-on (1) DSR signali… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14 | ColumnoHSCfgCtsIndication | read-write | current | A Control Signal configuration used on this port. When the Port type is X.21, this field represents the X.21 Control Signals. In all other cases, this is the C… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.15 | ColumnoHSCfgDTELoop | read-write | current | Enables or disables bi-directional DTE Local Loop & Remote Loop. This option only applies when port is configured for nxDs0-Special(3) or ds0-A-Special(4) mode… |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.16 | ColumnoHSCfgCmdStatus | read-write | current | The command status for this port configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.17 | ColumnoHSCfgClockEdgeErrs | read-write | current | Determines whether or not the port should monitor Clock Edge errors. |
| 1.3.6.1.4.1.644.2.4.2.5.2 | NodeohsDiag | |||
| 1.3.6.1.4.1.644.3.6 | IdentityeriDNXOctalHSMIB | The ERI Enterprise MIB Module for the DNX High Speed ports. |