ES3528-MIB
1315 objects
The MIB module for ES3528.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259 | Nodeaccton | |||
| 1.3.6.1.4.1.259.8 | Nodeedgecore | |||
| 1.3.6.1.4.1.259.8.2 | NodeaccessSwitchMgt | |||
| 1.3.6.1.4.1.259.8.2.1 | Identityes3528MIB | The MIB module for ES3528. | ||
| 1.3.6.1.4.1.259.8.2.1.1 | Nodees3528MIBObjects | |||
| 1.3.6.1.4.1.259.8.2.1.1.1 | NodeswitchMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.1.2 | ScalarswitchNumber | read-only | current | The total number of switches present on this system. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3 | TableswitchInfoTable | not-accessible | current | Table of descriptive and status information about the switch units in this system. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1 | RowswitchInfoEntry | not-accessible | current | Table providing descriptions and status information for switch units. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.1 | ColumnswUnitIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.2 | ColumnswHardwareVer | read-only | current | Hardware version of the main board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.3 | ColumnswMicrocodeVer | read-only | current | Microcode version of the main board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.4 | ColumnswLoaderVer | read-only | current | Loader version of the main board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.5 | ColumnswBootRomVer | read-only | current | Boot ROM code version of the main board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.6 | ColumnswOpCodeVer | read-only | current | Operation code version of the main board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.7 | ColumnswPortNumber | read-only | current | The number of ports on this switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.8 | ColumnswPowerStatus | read-only | current | Indicates the switch using internalPower(1), redundantPower(2) or both(3) |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.9 | ColumnswRoleInSystem | read-only | current | Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.10 | ColumnswSerialNumber | read-only | current | Serial number of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.11 | ColumnswExpansionSlot1 | read-only | current | Type of expansion module in this switch slot 1. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.12 | ColumnswExpansionSlot2 | read-only | current | Type of expansion module in this switch slot 2. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.13 | ColumnswServiceTag | read-only | current | Service tag serial-number of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.14 | ColumnswModelNumber | read-only | current | Model number of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.15 | ColumnswEpldVer | read-only | current | The EPLD version of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.3.1.16 | ColumnswExpectedModuleOpCodeVer | read-only | current | The module opcode version reside in the switch, note that this variable represent the desired version of the module which might plug in. For version validation… |
| 1.3.6.1.4.1.259.8.2.1.1.1.4 | ScalarswitchOperState | read-only | current | Global operation state of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5 | NodeswitchProductId | |||
| 1.3.6.1.4.1.259.8.2.1.1.1.5.1 | ScalarswProdName | read-only | current | The product name of this switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.2 | ScalarswProdManufacturer | read-only | current | The product manufacturer of this switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.3 | ScalarswProdDescription | read-only | current | The product description of this switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.4 | ScalarswProdVersion | read-only | current | The runtime code version of this switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.5 | ScalarswProdUrl | read-only | current | The URL of this switch, which we can connect through a web browser. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.6 | ScalarswIdentifier | read-only | current | A unique identifier of which switch in the chassis is currently being looked at. |
| 1.3.6.1.4.1.259.8.2.1.1.1.5.7 | ScalarswChassisServiceTag | read-only | current | The service tag of the chassis this switch resides in. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6 | TableswitchIndivPowerTable | not-accessible | current | Table about the status of individual powers. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6.1 | RowswitchIndivPowerEntry | not-accessible | current | Table about the status of individual power. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6.1.1 | ColumnswIndivPowerUnitIndex | accessible-for-notify | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6.1.2 | ColumnswIndivPowerIndex | accessible-for-notify | current | 1 means internal power, 2 means external power. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6.1.3 | ColumnswIndivPowerStatus | read-only | current | notPresent(1) means not present, green(2) means up, red(3) means down. |
| 1.3.6.1.4.1.259.8.2.1.1.1.6.1.4 | ColumnswIndivPowerType | read-only | current | These parameters indicate the power type used by the module. The value dc-n48(1) means that the power module uses DC-N48 as power input. The value dc-p27(2) me… |
| 1.3.6.1.4.1.259.8.2.1.1.1.7 | ScalarswitchJumboFrameStatus | read-write | current | enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.1.8 | NodeamtrMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.1.8.3 | ScalaramtrMacAddrAgingStatus | read-write | current | If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9 | TableswitchFanTable | not-accessible | current | The fan status table. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1 | RowswitchFanEntry | not-accessible | current | A conceptual row of the switchFanTable. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.1 | ColumnswitchUnitIndex | accessible-for-notify | current | The unit of the switch for the stackable device. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.2 | ColumnswitchFanIndex | accessible-for-notify | current | The unit number of the fan. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.3 | ColumnswitchFanStatus | read-only | current | Indicating the status of the fan, 1:ok; 2:failure. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.4 | ColumnswitchFanAdminSpeed | read-write | current | The speed of the fan, measured in rpm (rotations per minute). Set this object to 0 to enter auto mode, set to other values to enter manual mode. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.5 | ColumnswitchFanFailureCount | read-only | current | The total failure count of the fan since the switch has reboot. |
| 1.3.6.1.4.1.259.8.2.1.1.1.9.1.6 | ColumnswitchFanOperSpeed | read-only | current | The operational value of the fan speed, measured in rpm (rotations per minute). |
| 1.3.6.1.4.1.259.8.2.1.1.1.11 | TableswitchThermalTempTable | not-accessible | current | The table which collects temperature infomration of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.11.1 | RowswitchThermalTempEntry | not-accessible | current | A conceptual row of the switchThermalTempTable. |
| 1.3.6.1.4.1.259.8.2.1.1.1.11.1.1 | ColumnswitchThermalTempUnitIndex | not-accessible | current | The unit of the switch for stackable device. |
| 1.3.6.1.4.1.259.8.2.1.1.1.11.1.2 | ColumnswitchThermalTempThermalIndex | not-accessible | current | The thermal index of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.11.1.3 | ColumnswitchThermalTempValue | read-only | current | The temperature value in the device in grade Celsius. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12 | TableswitchThermalActionTable | not-accessible | current | The table for configuring the thermal action. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1 | RowswitchThermalActionEntry | not-accessible | current | A conceptual row of the switchThermalActionTable. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.1 | ColumnswitchThermalActionUnitIndex | accessible-for-notify | current | The unit of the switch for stackable device. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.2 | ColumnswitchThermalActionThermalIndex | accessible-for-notify | current | The thermal index of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.3 | ColumnswitchThermalActionIndex | accessible-for-notify | current | The action index of the switchTheramlActionTable. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.4 | ColumnswitchThermalActionRisingThreshold | read-create | current | The rising threshold of the switch temperature. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.5 | ColumnswitchThermalActionFallingThreshold | read-create | current | The falling threshold of the switch temperature. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.6 | ColumnswitchThermalActionAction | read-create | current | The action that will be taken when the temperature exceeds the rising threshold or falls below the falling threshold. |
| 1.3.6.1.4.1.259.8.2.1.1.1.12.1.7 | ColumnswitchThermalActionStatus | read-create | current | Set valid(1) to create an entry, Set Invalid(2) to delete an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13 | TableswitchModuleInfoTable | not-accessible | current | Table of descriptive and status information about the switch modules in this system. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1 | RowswitchModuleInfoEntry | not-accessible | current | Table providing descriptions and status information for switch modules. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.1 | ColumnswModuleUnitIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.2 | ColumnswModuleModuleIndex | not-accessible | current | This object identifies the module within the switch for which this entry contains information. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.3 | ColumnswModuleHardwareVer | read-only | current | Hardware version of the module board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.4 | ColumnswModuleMicrocodeVer | read-only | current | Microcode version of the module board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.5 | ColumnswModuleLoaderVer | read-only | current | Loader version of the module board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.6 | ColumnswModuleBootRomVer | read-only | current | Boot ROM code version of the module board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.7 | ColumnswModuleOpCodeVer | read-only | current | Operation code version of the module board. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.8 | ColumnswModulePortNumber | read-only | current | The number of ports of this module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.9 | ColumnswModuleSerialNumber | read-only | current | Serial number of the module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.10 | ColumnswModuleType | read-only | current | Type of module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.11 | ColumnswModuleModelNumber | read-only | current | Model number of the module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.12 | ColumnswModuleEpldVer | read-only | current | The EPLD version of the module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.13.1.13 | ColumnswModuleDescr | read-only | current | A textual description of the entity to describe the module. |
| 1.3.6.1.4.1.259.8.2.1.1.1.14 | ScalarswitchRenumberUnitID | read-write | current | The value renumber will automatically assign an ID to units in the stack; all UNIT IDs will be contiguous. The system configurations are not changed but the sy… |
| 1.3.6.1.4.1.259.8.2.1.1.1.17 | ScalarswitchFanFailureNum | read-only | current | This variable is used to display total number of nonfuncitonal fans. |
| 1.3.6.1.4.1.259.8.2.1.1.2 | NodeportMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.2.1 | TableportTable | not-accessible | current | Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1 | RowportEntry | not-accessible | current | An entry in the table, describing the configuration of one switch port or trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.1 | ColumnportIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.2 | ColumnportName | read-write | current | The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.3 | ColumnportType | read-only | current | Indicates the port type of the configuration of the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.4 | ColumnportSpeedDpxCfg | read-write | current | Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex … |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.5 | ColumnportFlowCtrlCfg | read-write | current | (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDu… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.6 | ColumnportCapabilities | read-write | current | Port or trunk capabilities. |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.7 | ColumnportAutonegotiation | read-write | current | Whether auto-negotiation is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.8 | ColumnportSpeedDpxStatus | read-only | current | The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the memb… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.9 | ColumnportFlowCtrlStatus | read-only | current | (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.10 | ColumnportTrunkIndex | read-only | current | The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.12 | ColumnportComboForcedMode | read-write | current | This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effec… |
| 1.3.6.1.4.1.259.8.2.1.1.2.1.1.14 | ColumnportMdixMode | read-write | current | This parameter can be configured to auto(1), which means the connection mode will be auto detected; straight(2), which means the connection is used the straigh… |
| 1.3.6.1.4.1.259.8.2.1.1.2.5 | TableportPacketFilterTable | not-accessible | current | Configure to filter some special packets. |
| 1.3.6.1.4.1.259.8.2.1.1.2.5.1 | RowportPacketFilterEntry | not-accessible | current | Configure to filter some special packets. |
| 1.3.6.1.4.1.259.8.2.1.1.2.5.1.1 | ColumnportPacketFilterIfIndex | not-accessible | current | The port interface of the portPacketFilterTable. The interface identified by a particular value of this index is the same interface identified by the same valu… |
| 1.3.6.1.4.1.259.8.2.1.1.2.5.1.2 | ColumnportPacketFilterCdpStatus | read-write | current | Whether CDP paket filtering is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.2.5.1.3 | ColumnportPacketFilterPvstStatus | read-write | current | Whether PVST paket filtering is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.2.7 | TableportVlanTrunkingTable | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.259.8.2.1.1.2.7.1 | RowportVlanTrunkingEntry | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.259.8.2.1.1.2.7.1.1 | ColumnportVlanTrunkingIfIndex | not-accessible | current | The port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the… |
| 1.3.6.1.4.1.259.8.2.1.1.2.7.1.2 | ColumnportVlanTrunkingStatus | read-write | current | Whether vlan trunking is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.3 | NodetrunkMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.3.1 | ScalartrunkMaxId | read-only | current | The maximum number for a trunk identifier. |
| 1.3.6.1.4.1.259.8.2.1.1.3.2 | ScalartrunkValidNumber | read-only | current | The number of valid trunks. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3 | TabletrunkTable | not-accessible | current | Table describing the configuration and status of each trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3.1 | RowtrunkEntry | not-accessible | current | An entry describing the configuration and status of a particular trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3.1.1 | ColumntrunkIndex | not-accessible | current | Identifies the trunk within the switch that is described by the table entry. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3.1.2 | ColumntrunkPorts | read-create | current | The complete set of ports currently associated with this trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3.1.3 | ColumntrunkCreation | read-only | current | A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.3.3.1.4 | ColumntrunkStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. |
| 1.3.6.1.4.1.259.8.2.1.1.3.4 | ScalartrunkBalanceMode | read-create | current | This defines the load balancing mode of trunks in the system. It may be based on source and/or destination MAC address or IP address. macSrc(1) means source MA… |
| 1.3.6.1.4.1.259.8.2.1.1.4 | NodelacpMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.4.1 | TablelacpPortTable | not-accessible | current | Table for LACP port configuration. |
| 1.3.6.1.4.1.259.8.2.1.1.4.1.1 | RowlacpPortEntry | not-accessible | current | Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in fa… |
| 1.3.6.1.4.1.259.8.2.1.1.4.1.1.1 | ColumnlacpPortIndex | not-accessible | current | The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of … |
| 1.3.6.1.4.1.259.8.2.1.1.4.1.1.2 | ColumnlacpPortStatus | read-write | current | Whether 802.3ad LACP is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5 | NodestaMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.5.1 | ScalarstaSystemStatus | read-write | current | Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2 | TablestaPortTable | not-accessible | current | The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1 | RowstaPortEntry | not-accessible | current | The conceptual entry of staPortTable. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.2 | ColumnstaPortFastForward | read-write | current | Whether fast forwarding is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.3 | ColumnstaPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.4 | ColumnstaPortAdminEdgePort | read-write | current | The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indi… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.5 | ColumnstaPortOperEdgePort | read-only | current | The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.6 | ColumnstaPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.7 | ColumnstaPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.9 | ColumnstaPortSystemStatus | read-write | current | Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.10 | ColumnstaPortLongAdminPathCost | read-write | current | The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.11 | ColumnstaPortLongOperPathCost | read-only | current | The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning … |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.12 | ColumnstaPortBpduFlooding | read-write | current | This parameter is used to configure the capability of BPDUs flooding. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.13 | ColumnstaPortRootGuardAdminStatus | read-write | current | Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.14 | ColumnstaPortRootGuardOperStatus | read-only | current | The current operational status of the root guard which provides a way to enforce the root bridge placement in the network. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.15 | ColumnstaPortBpduGuard | read-write | current | A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.16 | ColumnstaPortAdminEdgePortWithAuto | read-write | current | The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) ind… |
| 1.3.6.1.4.1.259.8.2.1.1.5.2.1.17 | ColumnstaPortBpduFilter | read-write | current | The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value … |
| 1.3.6.1.4.1.259.8.2.1.1.5.3 | ScalarstaProtocolType | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'… |
| 1.3.6.1.4.1.259.8.2.1.1.5.4 | ScalarstaTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.259.8.2.1.1.5.5 | ScalarstaPathCostMethod | read-write | current | Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the sw… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6 | NodexstMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.5.6.1 | ScalarmstName | read-write | current | The name of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.2 | ScalarmstRevision | read-write | current | The Revision number of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.3 | ScalarmstMaxHops | read-write | current | The max hop number counts of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4 | TablexstInstanceCfgTable | not-accessible | current | This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1 | RowxstInstanceCfgEntry | not-accessible | current | A conceptual row containing the property of the RST or MST instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.1 | ColumnxstInstanceCfgIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.2 | ColumnxstInstanceCfgPriority | read-write | current | The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.3 | ColumnxstInstanceCfgTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.4 | ColumnxstInstanceCfgTopChanges | read-only | current | The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.5 | ColumnxstInstanceCfgDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) … |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.6 | ColumnxstInstanceCfgRootCost | read-only | current | The cost of the path to the root as seen from this bridge of the RST or MST. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.7 | ColumnxstInstanceCfgRootPort | read-only | current | The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.8 | ColumnxstInstanceCfgMaxAge | read-only | current | The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.9 | ColumnxstInstanceCfgHelloTime | read-only | current | The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying t… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.10 | ColumnxstInstanceCfgHoldTime | read-only | current | This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.11 | ColumnxstInstanceCfgForwardDelay | read-only | current | For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards … |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.12 | ColumnxstInstanceCfgBridgeMaxAge | read-only | current | For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 speci… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.13 | ColumnxstInstanceCfgBridgeHelloTime | read-only | current | For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.14 | ColumnxstInstanceCfgBridgeForwardDelay | read-only | current | For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-19… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.15 | ColumnxstInstanceCfgTxHoldCount | read-only | current | For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.16 | ColumnxstInstanceCfgPathCostMethod | read-only | current | For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree pro… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5 | TablexstInstancePortTable | not-accessible | current | The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1 | RowxstInstancePortEntry | not-accessible | current | The conceptual row for xstInstancePortTable. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.3 | ColumnxstInstancePortPriority | read-write | current | Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest prior… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.4 | ColumnxstInstancePortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discard… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.5 | ColumnxstInstancePortEnable | read-only | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.7 | ColumnxstInstancePortDesignatedRoot | read-only | current | The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the po… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.8 | ColumnxstInstancePortDesignatedCost | read-only | current | The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.9 | ColumnxstInstancePortDesignatedBridge | read-only | current | The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.10 | ColumnxstInstancePortDesignatedPort | read-only | current | The port identifier of the port on the designated bridge for this port's segment. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.11 | ColumnxstInstancePortForwardTransitions | read-only | current | The number of times this port has transitioned from the learning state to the forwarding state. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.12 | ColumnxstInstancePortPortRole | read-only | current | The role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the b… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.13 | ColumnxstInstancePortAdminPathCost | read-write | current | The admin value of the MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, low… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.14 | ColumnxstInstancePortOperPathCost | read-only | current | The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices.… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6 | TablemstInstanceEditTable | not-accessible | current | The instance table for the Multiple Spanning Tree region |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1 | RowmstInstanceEditEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.1 | ColumnmstInstanceEditIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.2 | ColumnmstInstanceEditVlansMap | read-create | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.3 | ColumnmstInstanceEditVlansMap2k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.4 | ColumnmstInstanceEditVlansMap3k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.5 | ColumnmstInstanceEditVlansMap4k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.6 | ColumnmstInstanceEditRemainingHops | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7 | TablemstInstanceOperTable | not-accessible | current | The Multiple Spanning Tree region instance vlan mapped table. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1 | RowmstInstanceOperEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.1 | ColumnmstInstanceOperIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.2 | ColumnmstInstanceOperVlansMap | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.3 | ColumnmstInstanceOperVlansMap2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.4 | ColumnmstInstanceOperVlansMap3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.5 | ColumnmstInstanceOperVlansMap4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.8.2.1.1.5.7 | TablestaLoopbackDetectionPortTable | not-accessible | current | A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1 | RowstaLoopbackDetectionPortEntry | not-accessible | current | A conceptual row of staLoopbackDetectionPortTable. |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1.1 | ColumnstaLoopbackDetectionPortIfIndex | not-accessible | current | The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1.2 | ColumnstaLoopbackDetectionPortStatus | read-write | current | Status of the port on whether spanning tree loopback detection is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1.3 | ColumnstaLoopbackDetectionPortTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1.4 | ColumnstaLoopbackDetectionPortReleaseMode | read-write | current | Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicat… |
| 1.3.6.1.4.1.259.8.2.1.1.5.7.1.5 | ColumnstaLoopbackDetectionPortRelease | read-write | current | Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.259.8.2.1.1.7 | NoderestartMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.7.1 | ScalarrestartOpCodeFile | read-write | current | Name of op-code file for start-up. |
| 1.3.6.1.4.1.259.8.2.1.1.7.2 | ScalarrestartConfigFile | read-write | current | Name of configuration file for start-up. |
| 1.3.6.1.4.1.259.8.2.1.1.7.3 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is… |
| 1.3.6.1.4.1.259.8.2.1.1.8 | NodemirrorMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.8.1 | TablemirrorTable | not-accessible | current | Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be… |
| 1.3.6.1.4.1.259.8.2.1.1.8.1.1 | RowmirrorEntry | not-accessible | current | The conceptual row of mirrorTable. |
| 1.3.6.1.4.1.259.8.2.1.1.8.1.1.1 | ColumnmirrorDestinationPort | not-accessible | current | The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the sa… |
| 1.3.6.1.4.1.259.8.2.1.1.8.1.1.2 | ColumnmirrorSourcePort | not-accessible | current | The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.259.8.2.1.1.8.1.1.3 | ColumnmirrorType | read-create | current | If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and… |
| 1.3.6.1.4.1.259.8.2.1.1.8.1.1.4 | ColumnmirrorStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.9 | NodeigmpSnoopMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.9.1 | ScalarigmpSnoopStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.2 | ScalarigmpSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an IGMP querier. |
| 1.3.6.1.4.1.259.8.2.1.1.9.3 | ScalarigmpSnoopQueryCount | read-write | current | The query count from a querier, during which a response is expected from an endstation. If a querier has sent a number of counts defined by igmpSnoopQueryCount… |
| 1.3.6.1.4.1.259.8.2.1.1.9.4 | ScalarigmpSnoopQueryInterval | read-write | current | The interval (in seconds) between IGMP host-query messages sent by the switch. |
| 1.3.6.1.4.1.259.8.2.1.1.9.5 | ScalarigmpSnoopQueryMaxResponseTime | read-write | current | The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by igmpSnoopQueryCount, but a… |
| 1.3.6.1.4.1.259.8.2.1.1.9.6 | ScalarigmpSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.259.8.2.1.1.9.7 | ScalarigmpSnoopVersion | read-write | current | IGMP version snooped |
| 1.3.6.1.4.1.259.8.2.1.1.9.8 | TableigmpSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.8.1 | RowigmpSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.8.1.1 | ColumnigmpSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.8.2.1.1.9.8.1.2 | ColumnigmpSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. |
| 1.3.6.1.4.1.259.8.2.1.1.9.8.1.3 | ColumnigmpSnoopRouterCurrentStatus | read-only | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.9 | TableigmpSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.9.1 | RowigmpSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.9.1.1 | ColumnigmpSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.8.2.1.1.9.9.1.2 | ColumnigmpSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.259.8.2.1.1.9.9.1.3 | ColumnigmpSnoopRouterStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.9.10 | TableigmpSnoopMulticastCurrentTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.10.1 | RowigmpSnoopMulticastCurrentEntry | not-accessible | current | Entry for current multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.10.1.1 | ColumnigmpSnoopMulticastCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.8.2.1.1.9.10.1.2 | ColumnigmpSnoopMulticastCurrentIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.259.8.2.1.1.9.10.1.3 | ColumnigmpSnoopMulticastCurrentPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.259.8.2.1.1.9.10.1.4 | ColumnigmpSnoopMulticastCurrentStatus | read-only | current | The set of ports which are static members. |
| 1.3.6.1.4.1.259.8.2.1.1.9.11 | TableigmpSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.11.1 | RowigmpSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.11.1.1 | ColumnigmpSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.259.8.2.1.1.9.11.1.2 | ColumnigmpSnoopMulticastStaticIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.259.8.2.1.1.9.11.1.3 | ColumnigmpSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.259.8.2.1.1.9.11.1.4 | ColumnigmpSnoopMulticastStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.9.14 | TableigmpSnoopCurrentVlanTable | not-accessible | current | Table for enabling or disabling IGMP snooping per VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.9.14.1 | RowigmpSnoopCurrentVlanEntry | not-accessible | current | Entry for enabling or disabling IGMP snooping. |
| 1.3.6.1.4.1.259.8.2.1.1.9.14.1.1 | ColumnigmpSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.259.8.2.1.1.9.14.1.3 | ColumnigmpSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.9.15 | ScalarigmpSnoopLeaveProxy | read-write | current | This enables or disables Leave Proxy for IGMP Snooping. |
| 1.3.6.1.4.1.259.8.2.1.1.9.16 | ScalarigmpSnoopReportSuppressionStatus | read-write | deprecated | Parameter to enable or disable IGMP snooping report suppression on the device. When enabled, the device will suppress superabundance report and leave packets. … |
| 1.3.6.1.4.1.259.8.2.1.1.9.17 | ScalarigmpSnoopFilterStatus | read-write | current | Parameter to enable or disable IGMP filtering on the device. |
| 1.3.6.1.4.1.259.8.2.1.1.9.18 | TableigmpSnoopProfileTable | not-accessible | current | The table for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.18.1 | RowigmpSnoopProfileEntry | not-accessible | current | The entry for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.18.1.1 | ColumnigmpSnoopProfileId | not-accessible | current | The ID of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.18.1.2 | ColumnigmpSnoopProfileAction | read-write | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.18.1.3 | ColumnigmpSnoopProfileStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.9.19 | NodeigmpSnoopProfileCtl | |||
| 1.3.6.1.4.1.259.8.2.1.1.9.19.1 | ScalarigmpSnoopProfileCtlId | read-write | current | The ID of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.19.2 | ScalarigmpSnoopProfileCtlInetAddressType | read-write | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.259.8.2.1.1.9.19.3 | ScalarigmpSnoopProfileCtlStartInetAddress | read-write | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.19.4 | ScalarigmpSnoopProfileCtlEndInetAddress | read-write | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.19.5 | ScalarigmpSnoopProfileCtlAction | read-write | current | Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast … |
| 1.3.6.1.4.1.259.8.2.1.1.9.20 | TableigmpSnoopProfileRangeTable | not-accessible | current | The table for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1 | RowigmpSnoopProfileRangeEntry | not-accessible | current | The entry for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1.1 | ColumnigmpSnoopProfileRangeProfileId | not-accessible | current | This is defined as igmpSnoopProfileId. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1.2 | ColumnigmpSnoopProfileRangeInetAddressType | not-accessible | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1.3 | ColumnigmpSnoopProfileRangeStartInetAddress | not-accessible | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1.4 | ColumnigmpSnoopProfileRangeEndInetAddress | read-only | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.9.20.1.5 | ColumnigmpSnoopProfileRangeAction | read-only | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.259.8.2.1.1.9.21 | TableigmpSnoopFilterPortTable | not-accessible | current | Table for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.259.8.2.1.1.9.21.1 | RowigmpSnoopFilterPortEntry | not-accessible | current | Entry for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.259.8.2.1.1.9.21.1.1 | ColumnigmpSnoopFilterPortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.259.8.2.1.1.9.21.1.2 | ColumnigmpSnoopFilterPortProfileId | read-write | current | The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. I… |
| 1.3.6.1.4.1.259.8.2.1.1.9.22 | TableigmpSnoopThrottlePortTable | not-accessible | current | Table for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1 | RowigmpSnoopThrottlePortEntry | not-accessible | current | Entry for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1.1 | ColumnigmpSnoopThrottlePortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1.2 | ColumnigmpSnoopThrottlePortRunningStatus | read-only | current | Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) in… |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1.3 | ColumnigmpSnoopThrottlePortAction | read-write | current | The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and … |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1.4 | ColumnigmpSnoopThrottlePortMaxGroups | read-write | current | The maximum number of IGMP groups that the interface can join. |
| 1.3.6.1.4.1.259.8.2.1.1.9.22.1.5 | ColumnigmpSnoopThrottlePortCurrentGroups | read-only | current | The current number of IGMP groups that the interface has joined. |
| 1.3.6.1.4.1.259.8.2.1.1.10 | NodeipMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.10.1 | TablenetConfigTable | not-accessible | current | A table of netConfigEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1 | RownetConfigEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.1 | ColumnnetConfigIfIndex | not-accessible | current | The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.2 | ColumnnetConfigIPAddress | not-accessible | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then wh… |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.3 | ColumnnetConfigSubnetMask | not-accessible | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then … |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.4 | ColumnnetConfigPrimaryInterface | read-create | current | Whether this is a primary interface. |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.5 | ColumnnetConfigUnnumbered | read-only | current | Whether this is an unnumbered interface. |
| 1.3.6.1.4.1.259.8.2.1.1.10.1.1.6 | ColumnnetConfigStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.10.2 | ScalarnetDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.259.8.2.1.1.10.3 | ScalaripHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.10.4 | ScalaripHttpPort | read-write | current | The port number for HTTP. |
| 1.3.6.1.4.1.259.8.2.1.1.10.5 | ScalaripDhcpRestart | read-write | current | When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2). |
| 1.3.6.1.4.1.259.8.2.1.1.10.6 | ScalaripHttpsState | read-write | current | Whether HTTPS is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.10.7 | ScalaripHttpsPort | read-write | current | The port number for HTTPS. |
| 1.3.6.1.4.1.259.8.2.1.1.12 | NodevlanMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.12.1 | TablevlanTable | not-accessible | current | Table for VLAN configuration. |
| 1.3.6.1.4.1.259.8.2.1.1.12.1.1 | RowvlanEntry | not-accessible | current | Entry for VLAN configuration. |
| 1.3.6.1.4.1.259.8.2.1.1.12.1.1.1 | ColumnvlanIndex | not-accessible | current | Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.259.8.2.1.1.12.1.1.2 | ColumnvlanAddressMethod | read-write | current | Method to get the IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.12.2 | TablevlanPortTable | not-accessible | current | Table for port configuration in VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.12.2.1 | RowvlanPortEntry | not-accessible | current | Entry for port configuration in VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.12.2.1.1 | ColumnvlanPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.12.2.1.2 | ColumnvlanPortMode | read-write | current | This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to dot1q-tunnel(… |
| 1.3.6.1.4.1.259.8.2.1.1.12.2.1.4 | ColumnvlanPortDot1qEtherType | read-write | current | tpid for 802.1Q encapsulation. Used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. |
| 1.3.6.1.4.1.259.8.2.1.1.12.2.1.5 | ColumnvlanPortDot1qAddressMonitorMode | read-write | current | Whether address monitor for SBC mamnagment VLANs is enabled for this port. |
| 1.3.6.1.4.1.259.8.2.1.1.12.7 | NodevlanDot1qTunnelGlobalConfig | |||
| 1.3.6.1.4.1.259.8.2.1.1.12.7.1 | ScalarvlanDot1qTunnelStatus | read-write | current | This parameter is used to globally enable/disable 802.1Q Tunneling on the device. |
| 1.3.6.1.4.1.259.8.2.1.1.12.7.2 | ScalarvlanDot1qTunnelPriorityMapStatus | read-write | current | This parameter is used globally to enable/disable 802.1Q tag priority which is inherited from the inner tag to the outer on the device. |
| 1.3.6.1.4.1.259.8.2.1.1.12.16 | TablevlanL2ProtocolTunnelPortTable | not-accessible | current | Table for port configuration in Layer 2 Protocol Tunneling. |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1 | RowvlanL2ProtocolTunnelPortEntry | not-accessible | current | Entry for port configuration in Layer 2 Protocol Tunneling. |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1.1 | ColumnvlanL2ptPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1.2 | ColumnvlanL2ptPortSta | read-write | current | Set enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protoco… |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1.4 | ColumnvlanL2ptPortCdp | read-write | current | Set enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Pro… |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1.5 | ColumnvlanL2ptPortVtp | read-write | current | Set enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP. |
| 1.3.6.1.4.1.259.8.2.1.1.12.16.1.6 | ColumnvlanL2ptPortPvst | read-write | current | Set enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+. |
| 1.3.6.1.4.1.259.8.2.1.1.13 | NodepriorityMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.13.1 | ScalarprioIpPrecDscpStatus | read-write | current | Selects whether no frame priority mapping, IP ToS precedence mapping or DSCP mapping is performed. |
| 1.3.6.1.4.1.259.8.2.1.1.13.2 | TableprioIpPrecTable | not-accessible | current | Table for IP precedence priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.2.1 | RowprioIpPrecEntry | not-accessible | current | Entry for IP precedence priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.2.1.2 | ColumnprioIpPrecPort | not-accessible | current | The port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.259.8.2.1.1.13.2.1.3 | ColumnprioIpPrecValue | not-accessible | current | Value of IP ToS Precedence as specified in the packet header. |
| 1.3.6.1.4.1.259.8.2.1.1.13.2.1.4 | ColumnprioIpPrecCos | read-write | current | Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this Co… |
| 1.3.6.1.4.1.259.8.2.1.1.13.3 | ScalarprioIpPrecRestoreDefault | read-write | current | Enables the IP Precedence settings of a port to be restored to their default values. To reset the settings of a port, assign prioIpPrecRestoreDefault to the va… |
| 1.3.6.1.4.1.259.8.2.1.1.13.4 | TableprioIpDscpTable | not-accessible | current | Table for IP DSCP priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.4.1 | RowprioIpDscpEntry | not-accessible | current | Entry for IP DSCP priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.4.1.1 | ColumnprioIpDscpPort | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.13.4.1.2 | ColumnprioIpDscpValue | not-accessible | current | Value of IP DSCP as specified in the packet header. |
| 1.3.6.1.4.1.259.8.2.1.1.13.4.1.3 | ColumnprioIpDscpCos | read-write | current | Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of S… |
| 1.3.6.1.4.1.259.8.2.1.1.13.5 | ScalarprioIpDscpRestoreDefault | read-write | current | Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined… |
| 1.3.6.1.4.1.259.8.2.1.1.13.6 | ScalarprioIpPortEnableStatus | read-write | current | Whether IP Port priority look-up is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.13.7 | TableprioIpPortTable | not-accessible | current | Table for IP port priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.7.1 | RowprioIpPortEntry | not-accessible | current | Entry for IP port priority mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.13.7.1.1 | ColumnprioIpPortPhysPort | not-accessible | current | The port or the trunk (excluding trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.259.8.2.1.1.13.7.1.2 | ColumnprioIpPortValue | not-accessible | current | IP port for this value. |
| 1.3.6.1.4.1.259.8.2.1.1.13.7.1.3 | ColumnprioIpPortCos | read-create | current | Class of service for this entry. |
| 1.3.6.1.4.1.259.8.2.1.1.13.7.1.4 | ColumnprioIpPortStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.13.8 | NodeprioCopy | |||
| 1.3.6.1.4.1.259.8.2.1.1.13.8.1 | ScalarprioCopyIpPrec | read-write | current | Action to copy IP Precedence settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-l… |
| 1.3.6.1.4.1.259.8.2.1.1.13.8.2 | ScalarprioCopyIpDscp | read-write | current | Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (bi… |
| 1.3.6.1.4.1.259.8.2.1.1.13.8.3 | ScalarprioCopyIpPort | read-write | current | Action to copy IP Port settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (bi… |
| 1.3.6.1.4.1.259.8.2.1.1.13.10 | ScalarprioQueueMode | read-write | current | The global status for the prioQueue. wrr(1),strict(2) |
| 1.3.6.1.4.1.259.8.2.1.1.13.12 | TableprioWrrPortTable | not-accessible | current | Table for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.259.8.2.1.1.13.12.1 | RowprioWrrPortEntry | not-accessible | current | Entry for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.259.8.2.1.1.13.12.1.1 | ColumnprioWrrPortIfIndex | not-accessible | current | The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value … |
| 1.3.6.1.4.1.259.8.2.1.1.13.12.1.2 | ColumnprioWrrPortTrafficClass | not-accessible | current | Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTraf… |
| 1.3.6.1.4.1.259.8.2.1.1.13.12.1.3 | ColumnprioWrrPortWeight | read-write | current | Weight for this entry. |
| 1.3.6.1.4.1.259.8.2.1.1.14 | NodetrapDestMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.14.1 | TabletrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1 | RowtrapDestEntry | not-accessible | current | A destination entry describes the destination IP address, the community string, and SNMP version to use when sending a trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1.1 | ColumntrapDestAddress | not-accessible | current | The address to send traps. |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1.2 | ColumntrapDestCommunity | read-create | current | A community to which this destination address belongs. |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1.3 | ColumntrapDestStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1.4 | ColumntrapDestVersion | read-create | current | Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SN… |
| 1.3.6.1.4.1.259.8.2.1.1.14.1.1.5 | ColumntrapDestUdpPort | read-create | current | Determines the UDP port number that the trap will be sent to. |
| 1.3.6.1.4.1.259.8.2.1.1.14.2 | NodetrapVar | |||
| 1.3.6.1.4.1.259.8.2.1.1.14.2.6 | ScalartrapIpFilterRejectMode | accessible-for-notify | current | This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3). |
| 1.3.6.1.4.1.259.8.2.1.1.14.2.7 | ScalartrapIpFilterRejectIp | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. |
| 1.3.6.1.4.1.259.8.2.1.1.14.2.18 | ScalartrapAutoUpgradeResult | accessible-for-notify | current | The parameter indicates which result triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.2.19 | ScalartrapAutoUpgradeNewVer | accessible-for-notify | current | The parameter indicates new version which was upgraded to. When trapAutoUpgradeResult was failed(2), it would be null string. |
| 1.3.6.1.4.1.259.8.2.1.1.14.2.29 | ScalartrapPortSecurityIntrusionMac | accessible-for-notify | current | This variable indicates the intrusion MAC address. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5 | NodealarmMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.14.5.1 | ScalaralarmMajorType | accessible-for-notify | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5.2 | ScalaralarmMajorStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5.3 | ScalaralarmMinorType | accessible-for-notify | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5.4 | ScalaralarmMinorStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5.7 | ScalaralarmInputType | accessible-for-notify | current | The parameter indicates which alarm input event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.14.5.8 | ScalaralarmInputStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.259.8.2.1.1.16 | NodeqosMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.1 | NoderateLimitMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2 | TablerateLimitPortTable | not-accessible | current | Table for rate limit of each port. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1 | RowrateLimitPortEntry | not-accessible | current | Entry for rate limit of each port. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.1 | ColumnrlPortIndex | not-accessible | current | The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.6 | ColumnrlPortInputStatus | read-write | current | Whether input rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.7 | ColumnrlPortOutputStatus | read-write | current | Whether output rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.10 | ColumnrlPortInputLimitInKilo | read-write | current | Value of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 100000… |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.11 | ColumnrlPortOutputLimitInKilo | read-write | current | Value of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 10000… |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.5 | TablerateLimitCosPrioTable | not-accessible | current | Table for the rate limit, per port, per Class of Service priority. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.5.1 | RowrateLimitCosPrioEntry | not-accessible | current | Entry for the rate limit, per port, per Class of Service priority. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.1 | ColumnrateLimitCosPrioIfIndex | not-accessible | current | The port that the rate limit function is performed. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.2 | ColumnrateLimitCosPrioValue | not-accessible | current | The Class of Service priority value. |
| 1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.3 | ColumnrateLimitCosPrioRateLimitValue | read-write | current | The rate limit value of the Class of Service priority. If the value equals 0, it means that the rate limit function is disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2 | NodemarkerMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1 | TablemarkerTable | not-accessible | current | The marker table. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1 | RowmarkerEntry | not-accessible | current | Entry for marker table. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.1 | ColumnmarkerIfIndex | not-accessible | current | The interface index of the marker table. The interface identified by a particular value of this index is the same interface as identified by the same value of … |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.2 | ColumnmarkerAclName | not-accessible | current | The name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.3 | ColumnmarkerActionBitList | read-create | current | The marker action bit list, in right to left order. for example: 0x3(11 in binary) means dscp(0) and precedence(1) 0x4(100 in binary) means priority(2). |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.4 | ColumnmarkerDscp | read-create | current | The DSCP value of the marker entry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.5 | ColumnmarkerPrecedence | read-create | current | The precedence value of the marker entry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.6 | ColumnmarkerPriority | read-create | current | The priority value of the marker entry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.7 | ColumnmarkerStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.16.3 | NodecosMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1 | TableprioAclToCosMappingTable | not-accessible | current | Table for ACL to CoS Mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1.1 | RowprioAclToCosMappingEntry | not-accessible | current | Entry for ACL to CoS Mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.1 | ColumnprioAclToCosMappingIfIndex | not-accessible | current | The port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.2 | ColumnprioAclToCosMappingAclName | not-accessible | current | The name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.3 | ColumnprioAclToCosMappingCosValue | read-create | current | CoS value of the prioAclToCosMappingTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.4 | ColumnprioAclToCosMappingStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.16.4 | NodediffServMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.4.1 | TablediffServClfrExtTable | not-accessible | current | The conceptual table of diffServClfrExtEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.1.1 | RowdiffServClfrExtEntry | not-accessible | current | The conceptual row for diffServClfrExtTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.1 | ColumndiffServClfrExtName | read-write | current | The policy-map name. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.2 | ColumndiffServClfrExtDesc | read-write | current | The description of policy-map. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.2 | ScalardiffServClassMapNextFree | read-only | current | This object contains an unused value for diffServClassMapId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3 | TablediffServClassMapTable | not-accessible | current | The conceptual table of diffServClassMapEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1 | RowdiffServClassMapEntry | not-accessible | current | The conceptual row for diffServClassMapTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.1 | ColumndiffServClassMapId | not-accessible | current | An index that enumerates the Class Map entries. Managers obtain new values for row creation in this table by reading diffServClassMapNextFree. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.2 | ColumndiffServClassMapName | read-create | current | The class-map name. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.3 | ColumndiffServClassMapDesc | read-create | current | The description of class-map. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.4 | ColumndiffServClassMapType | read-create | current | The class-map type. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.5 | ColumndiffServCalssMapStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.4 | ScalardiffServClassMapElementNextFree | read-only | current | This object contains an unused value for diffServClassMapElementId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.5 | TablediffServClassMapElementTable | not-accessible | current | The conceptual table of diffServClassMapElementEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.5.1 | RowdiffServClassMapElementEntry | not-accessible | current | The conceptual row for diffServClassMapElementTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.1 | ColumndiffServClassMapElementId | not-accessible | current | An index that enumerates the Class Map Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.2 | ColumndiffServClassMapElementSpecific | read-create | current | A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters. This RowPointer should point to an instance… |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.3 | ColumndiffServClassMapElementStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.6 | TablediffServMultiFieldClfrExtTable | not-accessible | current | The conceptual table of diffServMultiFieldClfrExtEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.6.1 | RowdiffServMultiFieldClfrExtEntry | not-accessible | current | The conceptual row for diffServMultiFieldClfrExtTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.1 | ColumndiffServMultiFieldClfrExtType | read-write | current | Indicates the current type of the multi filed entry. This is a bit-map of possible conditions. The various bit positions are: 0: dscp. 1: ipPrecedence. 2: vid |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.2 | ColumndiffServMultiFieldClfrExtVid | read-write | current | The VLAN ID to match against the packet's VLAN ID. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.3 | ColumndiffServMultiFieldClfrExtIpPrecedence | read-write | current | The IP precedence value to match against the packet's IP precedence value. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.7 | TablediffServToSMarkActTable | not-accessible | current | The conceptual table of diffServToSMarkActEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.7.1 | RowdiffServToSMarkActEntry | not-accessible | current | The conceptual row for diffServToSMarkActTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.7.1.1 | ColumndiffServToSMarkActToS | read-only | current | The ToS value referenced by a diffServActionSpecific attribute. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.8 | TablediffServDot1pMarkActTable | not-accessible | current | The conceptual table of diffServDot1pMarkActEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.8.1 | RowdiffServDot1pMarkActEntry | not-accessible | current | The conceptual row for diffServDot1pMarkActTable. |
| 1.3.6.1.4.1.259.8.2.1.1.16.4.8.1.1 | ColumndiffServDot1pMarkActDot1p | read-only | current | The Dot1p value referenced by a diffServActionSpecific attribute. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5 | NodevlanBasedPrioMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1 | TablevlanBasedPrioTable | not-accessible | current | Table for vlan based priority. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1.1 | RowvlanBasedPrioEntry | not-accessible | current | Entry for vlan based priority. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.1 | ColumnvlanBasedPrioIfindex | not-accessible | current | The specified port or trunk for vlan based priority. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.2 | ColumnvlanBasedPrioVlanIndex | not-accessible | current | The vlan which this port joins in. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.3 | ColumnvlanBasedPrioPriority | read-write | current | The priority of the specified vlan traffic. |
| 1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.4 | ColumnvlanBasedPrioStatus | read-write | current | The status of the vlan based entry. Valid(1) means the entry is existent. |
| 1.3.6.1.4.1.259.8.2.1.1.17 | NodesecurityMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.1 | NodeprivateVlanMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.1.1 | ScalarprivateVlanStatus | read-write | current | This controls whether private VLAN is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.17.1.2 | ScalarprivateVlanUplinkPorts | read-write | current | This is the list of uplink ports for private VLAN. They should not overlap with privateVlanDownlinkPorts. Only one port can be set, no multiple ports. 0 will b… |
| 1.3.6.1.4.1.259.8.2.1.1.17.1.3 | ScalarprivateVlanDownlinkPorts | read-write | current | This is the list of downlink ports for private VLAN. They should not overlap with privateVlanUplinkPorts. Multiple port setting is permitted. 0 will be display… |
| 1.3.6.1.4.1.259.8.2.1.1.17.2 | NodeportSecurityMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1 | TableportSecPortTable | not-accessible | current | The port security(MAC binding) Table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1.1 | RowportSecPortEntry | not-accessible | current | The entry of portSecPortTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.1 | ColumnportSecPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.2 | ColumnportSecPortStatus | read-write | current | Set enabled(1) to enable port security and set disabled(2) to disable port security. |
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.3 | ColumnportSecAction | read-write | current | The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this var… |
| 1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.4 | ColumnportSecMaxMacCount | read-write | current | The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will di… |
| 1.3.6.1.4.1.259.8.2.1.1.17.4 | NoderadiusMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.4.1 | ScalarradiusServerGlobalAuthPort | read-write | current | Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.2 | ScalarradiusServerGlobalAcctPort | read-write | current | Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.3 | ScalarradiusServerGlobalKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set … |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.4 | ScalarradiusServerGlobalRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.5 | ScalarradiusServerGlobalTimeout | read-write | current | Timeout for RADIUS. When specified radius server do not set timeout, this value is used. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7 | TableradiusServerTable | not-accessible | current | The table for RADIUS server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1 | RowradiusServerEntry | not-accessible | current | The conceptual row for radiusServerTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.1 | ColumnradiusServerIndex | not-accessible | current | The RADIUS server index in the table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.2 | ColumnradiusServerAddress | read-create | current | IP address of a RADIUS server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.3 | ColumnradiusServerAuthPortNumber | read-create | current | Authentication port number of RADIUS server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.4 | ColumnradiusServerAcctPortNumber | read-create | current | Accounting port number of RADIUS server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.5 | ColumnradiusServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.6 | ColumnradiusServerRetransmit | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.7 | ColumnradiusServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.8 | ColumnradiusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5 | NodetacacsMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.5.2 | ScalartacacsPlusServerGlobalPortNumber | read-write | current | TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.3 | ScalartacacsPlusServerGlobalKey | read-write | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4 | TabletacacsPlusServerTable | not-accessible | current | The table for TACACS+ server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1 | RowtacacsPlusServerEntry | not-accessible | current | The conceptual row for tacacsPlusServerTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.1 | ColumntacacsPlusServerIndex | not-accessible | current | TACACS+ server index. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.2 | ColumntacacsPlusServerAddress | read-create | current | IP address of a TACACS+ server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.3 | ColumntacacsPlusServerPortNumber | read-create | current | TCP port number of a TACACS+ server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.4 | ColumntacacsPlusServerKey | read-create | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.8 | ColumntacacsPlusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.9 | ColumntacacsPlusServerRetransmit | read-create | current | The maximum number of retransmissions for TACACS+. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.10 | ColumntacacsPlusServerTimeout | read-create | current | Timeout for TACACS+. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.5 | ScalartacacsPlusServerGlobalRetransmit | read-write | current | The maximum number of retransmissions for TACACS+ global server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.5.6 | ScalartacacsPlusServerGlobalTimeout | read-write | current | Timeout for TACACS+ global server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6 | NodesshMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.6.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.2 | ScalarsshServerMajorVersion | read-only | current | The major version of the SSH Server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.3 | ScalarsshServerMinorVersion | read-only | current | The minor version of the SSH Server. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.4 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 1-120. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.5 | ScalarsshAuthRetries | read-write | current | The number of attempts after which the interface is reset. The range is 1-5. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6 | TablesshConnInfoTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1 | RowsshConnInfoEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.1 | ColumnsshConnID | not-accessible | current | The connection ID of the Secure Shell Connection. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.2 | ColumnsshConnMajorVersion | read-only | current | The SSH major version. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.3 | ColumnsshConnMinorVersion | read-only | current | The SSH minor version. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.5 | ColumnsshConnStatus | read-only | current | The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start … |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.6 | ColumnsshConnUserName | read-only | current | The user name of the connection. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.7 | ColumnsshDisconnect | read-write | current | Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.8 | ColumnsshConnEncryptionTypeStr | read-only | current | The encryption type of the SSH. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.7 | ScalarsshKeySize | read-write | current | The SSH server key size. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.8 | ScalarsshRsaHostKey1 | read-only | current | The RSA host key segment 1. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.9 | ScalarsshRsaHostKey2 | read-only | current | The RSA host key segment 2. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.10 | ScalarsshRsaHostKey3 | read-only | current | The RSA host key segment 3. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.11 | ScalarsshRsaHostKey4 | read-only | current | The RSA host key segment 4. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.12 | ScalarsshRsaHostKey5 | read-only | current | The RSA host key segment 5. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.13 | ScalarsshRsaHostKey6 | read-only | current | The RSA host key segment 6. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.14 | ScalarsshRsaHostKey7 | read-only | current | The RSA host key segment 7. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.15 | ScalarsshRsaHostKey8 | read-only | current | The RSA host key segment 8. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.16 | ScalarsshDsaHostKey1 | read-only | current | The DSA host key segment 1. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.17 | ScalarsshDsaHostKey2 | read-only | current | The DSA host key segment 2. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.18 | ScalarsshDsaHostKey3 | read-only | current | The DSA host key segment 3. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.19 | ScalarsshDsaHostKey4 | read-only | current | The DSA host key segment 4. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.20 | ScalarsshDsaHostKey5 | read-only | current | The DSA host key segment 5. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.21 | ScalarsshDsaHostKey6 | read-only | current | The DSA host key segment 6. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.22 | ScalarsshDsaHostKey7 | read-only | current | The DSA host key segment 7. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.23 | ScalarsshDsaHostKey8 | read-only | current | The DSA host key segment 8. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.24 | ScalarsshHostKeyGenAction | read-write | current | This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA ho… |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.25 | ScalarsshHostKeyGenStatus | read-only | current | The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.26 | ScalarsshHostKeySaveAction | read-write | current | To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when t… |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.27 | ScalarsshHostKeySaveStatus | read-only | current | The result of the last savekey status. If no save action has been performed, you will get unknown(1) status. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.28 | ScalarsshHostKeyDelAction | read-write | current | To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(… |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29 | TablesshUserTable | not-accessible | current | The conceptual table of all of sshUserEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1 | RowsshUserEntry | not-accessible | current | The conceptual row for sshUserTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.1 | ColumnsshUserName | not-accessible | current | User Name. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.2 | ColumnsshUserRsaKey1 | read-only | current | The RSA user key segment 1. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.3 | ColumnsshUserRsaKey2 | read-only | current | The RSA user key segment 2. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.4 | ColumnsshUserRsaKey3 | read-only | current | The RSA user key segment 3. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.5 | ColumnsshUserRsaKey4 | read-only | current | The RSA user key segment 4. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.6 | ColumnsshUserRsaKey5 | read-only | current | The RSA user key segment 5. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.7 | ColumnsshUserRsaKey6 | read-only | current | The RSA user key segment 6. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.8 | ColumnsshUserRsaKey7 | read-only | current | The RSA user key segment 7. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.9 | ColumnsshUserRsaKey8 | read-only | current | The RSA user key segment 8. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.10 | ColumnsshUserDsaKey1 | read-only | current | The DSA user key segment 1. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.11 | ColumnsshUserDsaKey2 | read-only | current | The DSA user key segment 2. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.12 | ColumnsshUserDsaKey3 | read-only | current | The DSA user key segment 3. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.13 | ColumnsshUserDsaKey4 | read-only | current | The DSA user key segment 4. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.14 | ColumnsshUserDsaKey5 | read-only | current | The DSA user key segment 5. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.15 | ColumnsshUserDsaKey6 | read-only | current | The DSA user key segment 6. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.16 | ColumnsshUserDsaKey7 | read-only | current | The DSA user key segment 7. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.17 | ColumnsshUserDsaKey8 | read-only | current | The DSA user key segment 8. |
| 1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.18 | ColumnsshUserKeyDelAction | read-write | current | To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7 | NodeaclMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1 | TableaclIpAceTable | not-accessible | current | The conceptual table of all of aclIpAceEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1 | RowaclIpAceEntry | not-accessible | current | The conceptual row for aclIpAceTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.1 | ColumnaclIpAceName | not-accessible | current | The name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.2 | ColumnaclIpAceIndex | not-accessible | current | The unique index of an ACE within an ACL. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.3 | ColumnaclIpAcePrecedence | read-only | current | Specifies the IP precedence value to be matched against. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.4 | ColumnaclIpAceAction | read-create | current | Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.5 | ColumnaclIpAceSourceIpAddr | read-create | current | The specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of thi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.6 | ColumnaclIpAceSourceIpAddrBitmask | read-create | current | The specified source IP address mask. The packet's destination address is AND-ed with the value of aclIpAceSourceIpAddr and then compared against the value of … |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.7 | ColumnaclIpAceDestIpAddr | read-create | current | The specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the valu… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.8 | ColumnaclIpAceDestIpAddrBitmask | read-create | current | The specified destination IP address mask. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.9 | ColumnaclIpAceProtocol | read-create | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. The… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.10 | ColumnaclIpAcePrec | read-create | current | Specifies the IP precedence value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.11 | ColumnaclIpAceTos | read-create | current | Specifies the IP ToS facility value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The val… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.12 | ColumnaclIpAceDscp | read-create | current | Specifies the DSCP value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this … |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.13 | ColumnaclIpAceSourcePortOp | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the so… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.14 | ColumnaclIpAceMinSourcePort | read-create | current | If the aclIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.15 | ColumnaclIpAceMaxSourcePort | read-create | current | If the aclIpAceSourcePortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.16 | ColumnaclIpAceSourcePortBitmask | read-create | current | If the aclIpAceSourcePortOp is equal(2), this indicates the bitmask of the aclIpAceMinSourcePort. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.17 | ColumnaclIpAceDestPortOp | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made w… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.18 | ColumnaclIpAceMinDestPort | read-create | current | If the aclIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.19 | ColumnaclIpAceMaxDestPort | read-create | current | If the aclIpAceDestPortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.20 | ColumnaclIpAceDestPortBitmask | read-create | current | If the aclIpAceDestPortOp is equal(2), this indicates the bitmask of the aclIpAceMinDestPort. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.21 | ColumnaclIpAceControlCode | read-create | current | Indicates how the control flags of TCP packets are to be compared. aceIpControlCode is AND-ed with aceIpControlCodeBitmask. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.22 | ColumnaclIpAceControlCodeBitmask | read-create | current | Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.23 | ColumnaclIpAceStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2 | TableaclMacAceTable | not-accessible | current | The conceptual table of all of aclMacAceEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1 | RowaclMacAceEntry | not-accessible | current | The conceptual row for aclMacAceTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.1 | ColumnaclMacAceName | not-accessible | current | The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.2 | ColumnaclMacAceIndex | not-accessible | current | The unique index of an ACE within an ACL. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.3 | ColumnaclMacAcePrecedence | read-only | current | Specifies the entry's precedence. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.4 | ColumnaclMacAceAction | read-create | current | Indicates the action to be taken if a packet matches this ACE. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.5 | ColumnaclMacAcePktformat | read-create | current | Used to check the packet format of the packets. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.6 | ColumnaclMacAceSourceMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified source MAC of the packet The packet's source MAC address is AND-ed with the value of aceMacSourceMa… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.7 | ColumnaclMacAceSourceMacAddrBitmask | read-create | current | The specified source MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.8 | ColumnaclMacAceDestMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of ace… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.9 | ColumnaclMacAceDestMacAddrBitmask | read-create | current | The specified destination MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.10 | ColumnaclMacAceVidOp | read-create | current | Indicates how a packet's vid is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.11 | ColumnaclMacAceMinVid | read-create | current | Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceSta… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.12 | ColumnaclMacAceVidBitmask | read-create | current | The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.14 | ColumnaclMacAceEtherTypeOp | read-create | current | Indicates how a packet's ethertype is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.15 | ColumnaclMacAceEtherTypeBitmask | read-create | current | The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.16 | ColumnaclMacAceMinEtherType | read-create | current | Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMac… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.18 | ColumnaclMacAceStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3 | TableaclAclGroupTable | not-accessible | current | The conceptual table of aclAclGroupEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1 | RowaclAclGroupEntry | not-accessible | current | The conceptual row for aclAclGroupTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.1 | ColumnaclAclGroupIfIndex | not-accessible | current | The interface number specifying the ACL binding to. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.2 | ColumnaclAclGroupIngressIpAcl | read-write | current | Specifies the ingress IP ACL(standard or extended) binding to the interface. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.3 | ColumnaclAclGroupEgressIpAcl | read-write | current | Specifies the egress IP ACL(standard or extended) binding to the interface. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.4 | ColumnaclAclGroupIngressMacAcl | read-write | current | Specifies the ingress MAC ACL binding to the interface. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.5 | ColumnaclAclGroupEgressMacAcl | read-write | current | Specifies the egress MAC ACL binding to the interface. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4 | TableaclIngressIpMaskTable | not-accessible | current | The conceptual table of aclIngressIpMaskEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1 | RowaclIngressIpMaskEntry | not-accessible | current | The conceptual row for aclIngressIpMaskTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.1 | ColumnaclIngressIpMaskIndex | not-accessible | current | Indicates the bitmask of the source IP address. The relative bitmask must be created before the ACE binds to the interface. This object cannot be configured wh… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.2 | ColumnaclIngressIpMaskPrecedence | read-only | current | Indicates whether to check the IP precedence against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress directi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.3 | ColumnaclIngressIpMaskIsEnableTos | read-create | current | Indicates whether to check the IP ToS facility against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direc… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.4 | ColumnaclIngressIpMaskIsEnableDscp | read-create | current | Indicates whether to check the IP DSCP against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. Th… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.5 | ColumnaclIngressIpMaskIsEnablePrecedence | read-create | current | Indicates whether to check the IP precednce against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress directio… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.6 | ColumnaclIngressIpMaskIsEnableProtocol | read-create | current | Indicates whether to check the IP protocol against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.7 | ColumnaclIngressIpMaskSourceIpAddrBitmask | read-create | current | Indicates the source IP bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. … |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.8 | ColumnaclIngressIpMaskDestIpAddrBitmask | read-create | current | Indicates the destination IP bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direct… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.9 | ColumnaclIngressIpMaskSourcePortBitmask | read-create | current | Indicates the source port bitmask to check against the TCP/UDP packets, The relative bitmask must be created before the ACE binds to the interface in ingress d… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.10 | ColumnaclIngressIpMaskDestPortBitmask | read-create | current | Indicates the destination port bitmask to check against the TCP/UDP packets, The relative bitmask must be created before the ACE binds to the interface in ingr… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.11 | ColumnaclIngressIpMaskControlCodeBitmask | read-create | current | Indicates the control code bitmask to check against the TCP packets, The relative bitmask must be created before the ACE binds to the interface in ingress dire… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.12 | ColumnaclIngressIpMaskStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5 | TableaclEgressIpMaskTable | not-accessible | current | The conceptual table of aclEgressIpMaskEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1 | RowaclEgressIpMaskEntry | not-accessible | current | The conceptual row for aclEgressIpMaskTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.1 | ColumnaclEgressIpMaskIndex | not-accessible | current | The index of a mask entry within a mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.2 | ColumnaclEgressIpMaskPrecedence | read-only | current | The created precedence of an mask entry within the mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.3 | ColumnaclEgressIpMaskIsEnableTos | read-create | current | Indicates whether to check the IP ToS facility against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direct… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.4 | ColumnaclEgressIpMaskIsEnableDscp | read-create | current | Indicates whether to check the IP DSCP against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. Thi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.5 | ColumnaclEgressIpMaskIsEnablePrecedence | read-create | current | Indicates whether to check the IP precedence against the packets. The relative bitmask must be created before the ACE binds to the interface in egress directio… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.6 | ColumnaclEgressIpMaskIsEnableProtocol | read-create | current | Indicates whether to check the IP protocol against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction.… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.7 | ColumnaclEgressIpMaskSourceIpAddrBitmask | read-create | current | Indicates the source IP bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. T… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.8 | ColumnaclEgressIpMaskDestIpAddrBitmask | read-create | current | Indicates the destination IP bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in egress directi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.9 | ColumnaclEgressIpMaskSourcePortBitmask | read-create | current | Indicates the source port bitmask to check against the TCP/UDP packets. The relative bitmask must be created before the ACE binds to the interface in egress di… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.10 | ColumnaclEgressIpMaskDestPortBitmask | read-create | current | Indicates the destination port bitmask to check against the TCP/UDP packets. The relative bitmask must be created before the ACE binds to the interface in egre… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.11 | ColumnaclEgressIpMaskControlCodeBitmask | read-create | current | Indicates the control code bitmask to check against the TCP packets. The relative bitmask must be created before the ACE binds to the interface in egress direc… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.12 | ColumnaclEgressIpMaskStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6 | TableaclIngressMacMaskTable | not-accessible | current | The conceptual table of aclIngressMacMaskEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1 | RowaclIngressMacMaskEntry | not-accessible | current | The conceptual row for aclIngressMacMaskTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.1 | ColumnaclIngressMacMaskIndex | not-accessible | current | The index of an mask entry within an ingress mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.2 | ColumnaclIngressMacMaskPrecedence | read-only | current | The created order of an mask entry within an ingress mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.3 | ColumnaclIngressMacMaskSourceMacAddrBitmask | read-create | current | Indicates the source MAC bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction.… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.4 | ColumnaclIngressMacMaskDestMacAddrBitmask | read-create | current | Indicates the destination MAC bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direc… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.5 | ColumnaclIngressMacMaskVidBitmask | read-create | current | Indicates the vid bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This o… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.6 | ColumnaclIngressMacMaskEtherTypeBitmask | read-create | current | Indicates the ethertype bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. … |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.7 | ColumnaclIngressMacMaskIsEnablePktformat | read-create | current | Indicates whether to check the packet format against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress directi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.8 | ColumnaclIngressMacMaskStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7 | TableaclEgressMacMaskTable | not-accessible | current | The conceptual table of aclEgressMacMaskEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1 | RowaclEgressMacMaskEntry | not-accessible | current | The conceptual row for aclEgressMacMaskTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.1 | ColumnaclEgressMacMaskIndex | not-accessible | current | The index of a mask entry within an egress mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.2 | ColumnaclEgressMacMaskPrecedence | read-only | current | The created precedence of a mask entry within an egress mask table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.3 | ColumnaclEgressMacMaskSourceMacAddrBitmask | read-create | current | Indicates the source MAC bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction.… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.4 | ColumnaclEgressMacMaskDestMacAddrBitmask | read-create | current | Indicates the destination MAC bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direc… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.5 | ColumnaclEgressMacMaskVidBitmask | read-create | current | Indicates the vid bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This o… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.6 | ColumnaclEgressMacMaskEtherTypeBitmask | read-create | current | Indicates the ethertype bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. … |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.7 | ColumnaclEgressMacMaskIsEnablePktformat | read-create | current | Indicates whether to check the packet format against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress directi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.8 | ColumnaclEgressMacMaskStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.8 | TableaclIpTable | not-accessible | current | The conceptual table of all of aclIpEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.8.1 | RowaclIpEntry | not-accessible | current | The conceptual row for aclIpTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.8.1.1 | ColumnaclIpAclName | read-only | current | The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.9 | TableaclMacTable | not-accessible | current | The conceptual table of all of aclMacEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.9.1 | RowaclMacEntry | not-accessible | current | The conceptual row for aclMacTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.9.1.1 | ColumnaclMacAclName | read-only | current | The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10 | TableaclArpAceTable | not-accessible | current | The conceptual table of all of aclArpAceEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1 | RowaclArpAceEntry | not-accessible | current | The conceptual row for aclArpAceTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.1 | ColumnaclArpAceName | not-accessible | current | The name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.2 | ColumnaclArpAceIndex | not-accessible | current | The unique index of an ACE within an ACL. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.3 | ColumnaclArpAcePrecedence | read-only | current | Specifies the ARP precedence value to be matched. This object cannot not be configured when the status of the entry, aclArpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.4 | ColumnaclArpAceAction | read-create | current | Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclArpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.5 | ColumnaclArpAcePktType | read-create | current | Indicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, aclArpAceStatus, is active(… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.6 | ColumnaclArpAceSourceIpAddr | read-create | current | The specified source ARP address. The packet's source address is AND'ed with the value of aclArpAceSourceIpAddrBitmask and then compared against the value of t… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.7 | ColumnaclArpAceSourceIpAddrBitmask | read-create | current | The specified source ARP address mask. The packet's destination address is AND'ed with the value of aclArpAceSourceIpAddr and then compared against the value o… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.8 | ColumnaclArpAceDestIpAddr | read-create | current | The specified destination IP address. The packet's destination address is AND'ed with the value of aclArpAceDestIpAddrBitmask and then compared against the val… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.9 | ColumnaclArpAceDestIpAddrBitmask | read-create | current | The specified destination IP address mask. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.10 | ColumnaclArpAceSourceMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceM… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.11 | ColumnaclArpAceSourceMacAddrBitmask | read-create | current | The specified source MAC address mask. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.12 | ColumnaclArpAceDestMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of ace… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.13 | ColumnaclArpAceDestMacAddrBitmask | read-create | current | The specified destination MAC address mask. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.14 | ColumnaclArpAceLogStatus | read-create | current | Indicates whether to log messages against the packets. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.15 | ColumnaclArpAceStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.11 | TableaclArpTable | not-accessible | current | The conceptual table of all of aclArpEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.11.1 | RowaclArpEntry | not-accessible | current | The conceptual row for aclArpTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.7.11.1.1 | ColumnaclArpAclName | read-only | current | The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9 | NodeipFilterMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.9.1 | TableipFilterSnmpTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.1.1 | RowipFilterSnmpEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.1 | ColumnipFilterSnmpStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.2 | ColumnipFilterSnmpEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.3 | ColumnipFilterSnmpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.2 | TableipFilterHTTPTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.2.1 | RowipFilterHTTPEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through HTTP. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.1 | ColumnipFilterHTTPStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.2 | ColumnipFilterHTTPEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.3 | ColumnipFilterHTTPStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.3 | TableipFilterTelnetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.3.1 | RowipFilterTelnetEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through Telnet. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.1 | ColumnipFilterTelnetStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.2 | ColumnipFilterTelnetEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.3 | ColumnipFilterTelnetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.11 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.11.1 | Tabledot1xAuthConfigExtTable | not-accessible | current | The extension table of dot1xAuthConfigTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.11.1.1 | Rowdot1xAuthConfigExtEntry | not-accessible | current | The entry of dot1xAuthConfigExtTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.1 | Columndot1xAuthConfigExtOperMode | read-write | current | The operation mode of dot1x port which allows host connection to 802.1x-authorized ports. |
| 1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.2 | Columndot1xAuthConfigExtMultiHostMaxCnt | read-write | current | The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12 | NodeaaaMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1 | TableaaaMethodTable | not-accessible | current | Contains the settings needed for accounting. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1 | RowaaaMethodEntry | not-accessible | current | A conceptual row in the aaaMethodTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.1 | ColumnaaaMethodIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.2 | ColumnaaaMethodName | read-create | current | Name for the method. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.3 | ColumnaaaMethodGroupName | read-create | current | Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.4 | ColumnaaaMethodMode | read-create | current | start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting re… |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.5 | ColumnaaaMethodStatus | read-create | current | Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.6 | ColumnaaaMethodClientType | read-create | current | dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3)… |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2 | TableaaaRadiusGroupTable | not-accessible | current | Uses a subset of RADIUS servers for accounting as defined by the server group |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2.1 | RowaaaRadiusGroupEntry | not-accessible | current | A conceptual row of aaaRadiusGroupEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.1 | ColumnaaaRadiusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.2 | ColumnaaaRadiusGroupServerBitMap | read-create | current | Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radi… |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.3 | ColumnaaaRadiusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.4 | ColumnaaaRadiusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3 | TableaaaTacacsPlusGroupTable | not-accessible | current | Uses a subset of TACACS+ servers for accounting as defined by the server group |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3.1 | RowaaaTacacsPlusGroupEntry | not-accessible | current | A conceptual row of aaaTacacsPlusGroupEntry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.1 | ColumnaaaTacacsPlusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.2 | ColumnaaaTacacsPlusGroupServerBitMap | read-create | current | Identifies which TACACS+ sever to use. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.3 | ColumnaaaTacacsPlusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.4 | ColumnaaaTacacsPlusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.4 | ScalaraaaUpdate | read-write | current | Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5 | TableaaaAccountTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5.1 | RowaaaAccountEntry | not-accessible | current | A conceptual row of aaaAccountTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.1 | ColumnaaaAccountIfIndex | not-accessible | current | Defined as the ifIndex |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.2 | ColumnaaaAccountMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.3 | ColumnaaaAccountProtocol | read-only | current | Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.4 | ColumnaaaAccountStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.9 | TableaaaAccExecTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.9.1 | RowaaaAccExecEntry | not-accessible | current | A conceptual row of aaaAccExecTable. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.1 | ColumnaaaAccExecIndex | not-accessible | current | The method of accessing CLI management. |
| 1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.2 | ColumnaaaAccExecMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.259.8.2.1.1.19 | NodesysLogMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.19.1 | ScalarsysLogStatus | read-write | current | Whether the system log is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.19.2 | ScalarsysLogHistoryFlashLevel | read-write | current | Severity level for logging to flash. |
| 1.3.6.1.4.1.259.8.2.1.1.19.3 | ScalarsysLogHistoryRamLevel | read-write | current | Severity level for logging to RAM. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6 | NoderemoteLogMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.19.6.1 | ScalarremoteLogStatus | read-write | current | Whether the remote log system is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.2 | ScalarremoteLogLevel | read-write | current | Severity level for remote log. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.3 | ScalarremoteLogFacilityType | read-write | current | The facility type for remote log. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.4 | TableremoteLogServerTable | not-accessible | current | A Table for storing the remote log Server list. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.4.1 | RowremoteLogServerEntry | not-accessible | current | A conceptually row for remoteLogServerTable. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.1 | ColumnremoteLogServerIp | not-accessible | current | The IP address of the remote log Server. |
| 1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.2 | ColumnremoteLogServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7 | NodesmtpMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.19.7.1 | ScalarsmtpStatus | read-write | current | Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.2 | ScalarsmtpSeverityLevel | read-write | current | Specify the SMTP minimum severity level to send the event message. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.3 | ScalarsmtpSourceEMail | read-write | current | SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.4 | TablesmtpServerIpTable | not-accessible | current | The SMTP server IP table. The maximum servers to be added is 3. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.4.1 | RowsmtpServerIpEntry | not-accessible | current | A conceptual row of the smtpServerIpTable. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.1 | ColumnsmtpServerIp | accessible-for-notify | current | SMTP mail server's IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.2 | ColumnsmtpServerIpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.5 | TablesmtpDestEMailTable | not-accessible | current | The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.5.1 | RowsmtpDestEMailEntry | not-accessible | current | A conceptual row of the smtpDestEMailTable. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.1 | ColumnsmtpDestEMail | not-accessible | current | SMTP destination e-mail address. |
| 1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.2 | ColumnsmtpDestEMailStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.20 | NodelineMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.20.1 | NodeconsoleMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.20.1.1 | ScalarconsoleDataBits | read-write | current | Number of data bits. |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.2 | ScalarconsoleParity | read-write | current | Defines the generation of a parity bit. |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.4 | ScalarconsoleStopBits | read-write | current | The console stop bits, valid values are stopbits1(1) or stopbits2(2) |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.5 | ScalarconsoleExecTimeout | read-write | current | In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the valu… |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.6 | ScalarconsolePasswordThreshold | read-write | current | The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A … |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.7 | ScalarconsoleSilentTime | read-write | current | The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 dis… |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.8 | ScalarconsoleAdminBaudRate | read-write | current | Baud rate. Valid values are 2400, 4800, 9600, 19200, 38400, 57600, 115200. Setting this variable to 0 means autobaud. Please read the actual baud rate in the c… |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.9 | ScalarconsoleOperBaudRate | read-only | current | The baud rate currently in use. |
| 1.3.6.1.4.1.259.8.2.1.1.20.1.10 | ScalarconsoleLoginResponseTimeout | read-write | current | Console login response timeout setting. Valid range is 0 to 300. Setting to 0 means disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.20.2 | NodetelnetMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.20.2.1 | ScalartelnetExecTimeout | read-write | current | Specifies the interval that the system waits for user input before terminating the current telnet session. |
| 1.3.6.1.4.1.259.8.2.1.1.20.2.2 | ScalartelnetPasswordThreshold | read-write | current | The number of failed telnet logon attempts that may be made before the system will not accept a further attempt to logon with telnet. |
| 1.3.6.1.4.1.259.8.2.1.1.20.2.3 | ScalartelnetLoginResponseTimeout | read-write | current | Telnet login response timeout setting. Valid range is 1 to 300. This timout setting cannot be disbled. |
| 1.3.6.1.4.1.259.8.2.1.1.20.2.4 | ScalartelnetStatus | read-write | current | To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to d… |
| 1.3.6.1.4.1.259.8.2.1.1.20.2.5 | ScalartelnetPortNumber | read-write | current | The telnet session port number. |
| 1.3.6.1.4.1.259.8.2.1.1.23 | NodesysTimeMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.23.1 | NodesntpMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.23.1.1 | ScalarsntpStatus | read-write | current | Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.2 | ScalarsntpServiceMode | read-write | current | Service mode. |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.3 | ScalarsntpPollInterval | read-write | current | Polling interval. |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.4 | TablesntpServerTable | not-accessible | current | Table for SNTP servers |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.4.1 | RowsntpServerEntry | not-accessible | current | Entry for SNTP servers. |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.1 | ColumnsntpServerIndex | not-accessible | current | The index of a server. This table has fixed size. |
| 1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.2 | ColumnsntpServerIpAddress | read-write | current | The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0. |
| 1.3.6.1.4.1.259.8.2.1.1.23.2 | ScalarsysCurrentTime | read-write | current | This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is… |
| 1.3.6.1.4.1.259.8.2.1.1.23.3 | ScalarsysTimeZone | read-write | current | This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a neg… |
| 1.3.6.1.4.1.259.8.2.1.1.23.4 | ScalarsysTimeZoneName | read-write | current | The name of the time zone. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5 | NodentpMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.23.5.1 | ScalarntpStatus | read-write | current | Set enabled(1) to enable the NTP, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.2 | ScalarntpServiceMode | read-write | current | Service mode. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.4 | ScalarntpAuthenticateStatus | read-write | current | Set enabled(1) to enable the NTP Authenticate, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5 | TablentpServerTable | not-accessible | current | Table for NTP servers |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5.1 | RowntpServerEntry | not-accessible | current | Entry for NTP servers. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.1 | ColumnntpServerIpAddress | not-accessible | current | The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.2 | ColumnntpServerVersion | read-only | current | NTP version. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.3 | ColumnntpServerKeyId | read-write | current | Key for a NTP server. This variable can only be written. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.4 | ColumnntpServerStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.6 | TablentpAuthKeyTable | not-accessible | current | Table for NTP Authentication keys |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.6.1 | RowntpAuthKeyEntry | not-accessible | current | Entry for NTP Authentication keys. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.1 | ColumnntpAuthKeyId | not-accessible | current | The index of a Authentication key. This table has fixed size. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.2 | ColumnntpAuthKeyWord | read-create | current | The Authentication key word is used to created a key by the MD5 And the max length is 32. |
| 1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.3 | ColumnntpAuthKeyStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.24 | NodefileMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.24.1 | NodefileCopyMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.24.1.1 | ScalarfileCopySrcOperType | read-write | current | The Copy Operation that we want to perform on the fileCopyDestOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOper… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.2 | ScalarfileCopySrcFileName | read-write | current | The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.3 | ScalarfileCopyDestOperType | read-write | current | The Copy Operation that we want to perform on fileCopySrcOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.4 | ScalarfileCopyDestFileName | read-write | current | The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.5 | ScalarfileCopyFileType | read-write | current | Type of file to copy in fileCopyMgt. If the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2) or startupCfg(3), this variable can be ignored.… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.6 | ScalarfileCopyTftpServer | read-write | current | The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been speci… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.7 | ScalarfileCopyUnitId | read-write | current | Specifies the switch unit for stackable devices. When performing the 'copy unit file' or 'copy file unit' action, if neither fileCopySrcOperType nor fileCopyDe… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.8 | ScalarfileCopyAction | read-write | current | Setting this object to copy(2) to begin the copy Operation. |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.9 | ScalarfileCopyStatus | read-only | current | The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. If the fileCopyDes… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.12 | ScalarfileCopyFtpLoginUsername | read-write | current | Login username of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.13 | ScalarfileCopyFtpLoginPassword | read-write | current | Login password of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. This variable can only be wr… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15 | NodefileCopyOam | |||
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15.1 | ScalarfileCopyOamPorts | read-write | current | The port list which ports on the bitmap perform remote firmware upgrade. Note: If the fileCopyDestOperType is not oamRemote(9), this variable can be ignored. |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15.2 | TablefileCopyOamResultTable | not-accessible | current | Table for OAM remote firmware upgrade result. |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1 | RowfileCopyOamResultEntry | not-accessible | current | A result entry for OAM remote firmware upgrade. |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.1 | ColumnfileCopyOamLocalIfIndex | not-accessible | current | The ifIndex value of the port excluding trunk. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.2 | ColumnfileCopyOamResult | read-only | current | The status of the last firmware upgrade procedure. This object will have a value of oamStatusUnknown(2) if no firmware upgrade operation has been performed. Th… |
| 1.3.6.1.4.1.259.8.2.1.1.24.2 | NodefileInfoMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1 | TablefileInfoTable | not-accessible | current | This table contain the information of the file system; we can also perform the delete, set startup file operation. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1 | RowfileInfoEntry | not-accessible | current | A conceptually row for fileInfoTable. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.1 | ColumnfileInfoUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.2 | ColumnfileInfoFileName | not-accessible | current | The file Name of the file System in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.3 | ColumnfileInfoFileType | read-only | current | The file type of the file System in the device. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.4 | ColumnfileInfoIsStartUp | read-write | current | This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is … |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.5 | ColumnfileInfoFileSize | read-only | current | The sizes( in bytes) of the file. |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.6 | ColumnfileInfoCreationTime | read-only | current | The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the Eng… |
| 1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.7 | ColumnfileInfoDelete | read-write | current | Write this object to delete(2) to delete a file, when read, this always return noDelete(1). |
| 1.3.6.1.4.1.259.8.2.1.1.24.3 | TablefileAutoDownloadResultTable | not-accessible | current | This table contains file auto download result information. |
| 1.3.6.1.4.1.259.8.2.1.1.24.3.1 | RowfileAutoDownloadResultEntry | not-accessible | current | A conceptual row for fileAutoDownloadResultTable. |
| 1.3.6.1.4.1.259.8.2.1.1.24.3.1.1 | ColumnfileAutoDownloadResultUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.259.8.2.1.1.24.3.1.2 | ColumnfileAutoDownloadResultAction | read-only | current | The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be o… |
| 1.3.6.1.4.1.259.8.2.1.1.24.3.1.3 | ColumnfileAutoDownloadResultStatus | read-only | current | The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. |
| 1.3.6.1.4.1.259.8.2.1.1.24.4 | NodefileAutoUpgradeMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.24.4.1 | ScalarfileAutoUpgradeOpCodeStatus | read-write | current | Set this variable to enabled(1) to enable the device to automatically upgrade the current software image when a new version is detected. Set this variable to d… |
| 1.3.6.1.4.1.259.8.2.1.1.24.4.2 | ScalarfileAutoUpgradeOpCodePath | read-write | current | The URL (Universal Resource Location) of the image file location for automatic upgrades. The URL schema can be set to TFTP or FTP. The Hostname is the IP addre… |
| 1.3.6.1.4.1.259.8.2.1.1.26 | NodednsMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.26.1 | ScalardnsDomainLookup | read-write | current | To enable the IP Domain Naming System (DNS)-based host name-to-address translation. |
| 1.3.6.1.4.1.259.8.2.1.1.26.2 | ScalardnsDomainName | read-write | current | To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). |
| 1.3.6.1.4.1.259.8.2.1.1.26.3 | TablednsHostTable | not-accessible | current | This table is used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.259.8.2.1.1.26.3.1 | RowdnsHostEntry | not-accessible | current | A conceptual row for the dnsHostTable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.3.1.1 | ColumndnsHostName | not-accessible | current | The DNS Host name. |
| 1.3.6.1.4.1.259.8.2.1.1.26.3.1.2 | ColumndnsHostIndex | not-accessible | current | The secondary index of this dnsHostTable, representing the sequence of the dnsHostIp. |
| 1.3.6.1.4.1.259.8.2.1.1.26.3.1.3 | ColumndnsHostIp | read-create | current | The DNS Host IP. |
| 1.3.6.1.4.1.259.8.2.1.1.26.4 | TablednsAliasTable | not-accessible | current | This table displays the alias of the host name. |
| 1.3.6.1.4.1.259.8.2.1.1.26.4.1 | RowdnsAliasEntry | not-accessible | current | A conceptual row for the dnsAliasTable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.4.1.1 | ColumndnsAliasName | read-only | current | Host name. |
| 1.3.6.1.4.1.259.8.2.1.1.26.4.1.2 | ColumndnaAliasAlias | read-only | current | Alias. |
| 1.3.6.1.4.1.259.8.2.1.1.26.5 | TablednsDomainListTable | not-accessible | current | This table defines a list of default domain names to complete unqualified host names. |
| 1.3.6.1.4.1.259.8.2.1.1.26.5.1 | RowdnsDomainListEntry | not-accessible | current | A conceptual row for the dnsDomainListTable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.5.1.1 | ColumndnsDomainListName | not-accessible | current | Domain name. |
| 1.3.6.1.4.1.259.8.2.1.1.26.5.1.2 | ColumndnsDomainListStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.26.6 | TablednsNameServerTable | not-accessible | current | To specify the address of one or more name servers to use for name and address resolution. This table has fixed size, will get 0.0.0.0 dnsNameServerIp if this … |
| 1.3.6.1.4.1.259.8.2.1.1.26.6.1 | RowdnsNameServerEntry | not-accessible | current | A conceptual row for dnsNameServerTable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.6.1.1 | ColumndnsNameServerIndex | not-accessible | current | Index of this dnsNameServerTable, representing the sequence of the dnsNameServerIp. |
| 1.3.6.1.4.1.259.8.2.1.1.26.6.1.2 | ColumndnsNameServerIp | read-write | current | IP address of name server. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7 | TablednsCacheTable | not-accessible | current | To display the RRs in DNS cache. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1 | RowdnsCacheEntry | not-accessible | current | A conceptual row for the dnsCacheTable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.1 | ColumndnsCacheIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.2 | ColumndnsCacheFlag | read-only | current | Always get 4, means this record is unreliable. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.3 | ColumndnsCacheType | read-only | current | Cache Type: address(1); cname(2). |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.4 | ColumndnsCacheIp | read-only | current | The DNS cache IP. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.5 | ColumndnsCacheTtl | read-only | current | The DNS cache TTL. |
| 1.3.6.1.4.1.259.8.2.1.1.26.7.1.6 | ColumndnsCacheDomain | read-only | current | The DNS cache domain. |
| 1.3.6.1.4.1.259.8.2.1.1.33 | NodestormMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.33.1 | NodemcastStormMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.33.1.1 | TablemcastStormTable | not-accessible | current | Table to manage the control of multicast storms for ports. |
| 1.3.6.1.4.1.259.8.2.1.1.33.1.1.1 | RowmcastStormEntry | not-accessible | current | The conceptual row of multiStormTable. |
| 1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.1 | ColumnmcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.2 | ColumnmcastStormStatus | read-write | current | Whether multicast storm protection is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.4 | ColumnmcastStormPktRate | read-write | current | Multicast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. |
| 1.3.6.1.4.1.259.8.2.1.1.33.3 | NodebcastStormMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.33.3.1 | TablebcastStormTable | not-accessible | current | Table to manage the control of broadcast storms for ports. |
| 1.3.6.1.4.1.259.8.2.1.1.33.3.1.1 | RowbcastStormEntry | not-accessible | current | The conceptual row of bcastStormTable. |
| 1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.1 | ColumnbcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.2 | ColumnbcastStormStatus | read-write | current | Whether broadcast storm protection is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.4 | ColumnbcastStormPktRate | read-write | current | Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. For a 10 Gbps port, the range is 1042 to… |
| 1.3.6.1.4.1.259.8.2.1.1.33.4 | NodeunknownUcastStormMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1 | TableunknownUcastStormTable | not-accessible | current | Table to manage the unknown unicast storm control. |
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1.1 | RowunknownUcastStormEntry | not-accessible | current | The conceptual row of unknownUcastStormTable. |
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.1 | ColumnunknownUcastStormIfIndex | not-accessible | current | The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same valu… |
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.2 | ColumnunknownUcastStormStatus | read-write | current | The parameter indicates that the unknown unicast storm protection is enabled/disabled. |
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.3 | ColumnunknownUcastStormSampleType | read-write | current | The parameter indicates which storm protection mode is used. |
| 1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.4 | ColumnunknownUcastStormPktRate | read-write | current | The parameter indicates the packet rate of the storm protection. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5 | NodeatcMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.33.5.1 | ScalaratcBcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.2 | ScalaratcBcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3 | TableatcBcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for broadcast traffic. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1 | RowatcBcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.1 | ColumnatcBcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.2 | ColumnatcBcastStormEnable | read-write | current | The parameter indicates whether the ATC of the broadcast traffic is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.3 | ColumnatcBcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.4 | ColumnatcBcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.5 | ColumnatcBcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current broadcast traffic rate. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.6 | ColumnatcBcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. The unit of the parameter … |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.7 | ColumnatcBcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. The unit of the par… |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.8 | ColumnatcBcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.9 | ColumnatcBcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.10 | ColumnatcBcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.11 | ColumnatcBcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.12 | ColumnatcBcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.4 | ScalaratcMcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.5 | ScalaratcMcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6 | TableatcMcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for mulicast traffic. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1 | RowatcMcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.1 | ColumnatcMcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.2 | ColumnatcMcastStormEnable | read-write | current | The parameter indicates whether the ATC of the mulicast traffic is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.3 | ColumnatcMcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.4 | ColumnatcMcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.5 | ColumnatcMcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current mulicast traffic rate. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.6 | ColumnatcMcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. The unit of the parameter i… |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.7 | ColumnatcMcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. The unit of the para… |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.8 | ColumnatcMcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.9 | ColumnatcMcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.10 | ColumnatcMcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.11 | ColumnatcMcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.12 | ColumnatcMcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.259.8.2.1.1.39 | NodesysResourceMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.39.2 | NodecpuStatus | |||
| 1.3.6.1.4.1.259.8.2.1.1.39.2.1 | ScalarcpuCurrentUti | read-only | current | The current CPU utilization in percent in the past 5 seconds. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.2 | ScalarcpuStatMaxUti | read-only | current | The maximum CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.3 | ScalarcpuStatAvgUti | read-only | current | The average CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.4 | ScalarcpuPeakTime | read-only | current | The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.5 | ScalarcpuPeakDuration | read-only | current | The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.6 | ScalarcpuUtiRisingThreshold | read-write | current | The rising threshold of the cpu utilization. |
| 1.3.6.1.4.1.259.8.2.1.1.39.2.7 | ScalarcpuUtiFallingThreshold | read-write | current | The falling threshold of the cpu utilization. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3 | NodememoryStatus | |||
| 1.3.6.1.4.1.259.8.2.1.1.39.3.1 | ScalarmemoryTotal | read-only | current | The total amount of the memory in bytes. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3.2 | ScalarmemoryAllocated | read-only | current | The amount of the memory allocated in bytes. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3.3 | ScalarmemoryFreed | read-only | current | The amount of the free memory in bytes. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3.4 | ScalarmemoryFreedInPercent | read-only | current | the memory freed in proportion to the total memory. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3.5 | ScalarmemoryUtiRisingThreshold | read-write | current | The rising threshold of the memory utilization. |
| 1.3.6.1.4.1.259.8.2.1.1.39.3.6 | ScalarmemoryUtiFallingThreshold | read-write | current | The falling threshold of the memory utilization. |
| 1.3.6.1.4.1.259.8.2.1.1.44 | NodemvrMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.44.1 | ScalarmvrStatus | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. NOTE: IGMP Snooping must be enabled first before enabling MVR and MVR will be di… |
| 1.3.6.1.4.1.259.8.2.1.1.44.2 | ScalarmvrVlanId | read-write | current | To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-… |
| 1.3.6.1.4.1.259.8.2.1.1.44.3 | ScalarmvrMaxGroups | read-only | current | The maximum number of MVR groups. |
| 1.3.6.1.4.1.259.8.2.1.1.44.4 | ScalarmvrCurrentGroups | read-only | current | The current number of MVR groups. |
| 1.3.6.1.4.1.259.8.2.1.1.44.5 | NodemvrGroupsCtl | |||
| 1.3.6.1.4.1.259.8.2.1.1.44.5.1 | ScalarmvrGroupsCtlId | read-write | current | The start of a contiguous range of MVR group addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.44.5.2 | ScalarmvrGroupsCtlCount | read-write | current | The range count for configuring MVR group addresses. |
| 1.3.6.1.4.1.259.8.2.1.1.44.5.3 | ScalarmvrGroupsCtlAction | read-write | current | Sets the configure action for a contiguous range of MVR group addresses. The start addresses is the current value of mvrGroupsCtlId and the range count is the … |
| 1.3.6.1.4.1.259.8.2.1.1.44.6 | TablemvrGroupTable | not-accessible | current | The table for configuring the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.6.1 | RowmvrGroupEntry | not-accessible | current | The entry for configuring the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.6.1.1 | ColumnmvrGroupId | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.6.1.2 | ColumnmvrGroutActive | read-only | current | To indicate if the group has a member or not. If there are no members, the status is inactive(2); otherwise the status is active(1). |
| 1.3.6.1.4.1.259.8.2.1.1.44.6.1.3 | ColumnmvrGroupStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.44.7 | TablemvrGroupStaticTable | not-accessible | current | The table for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.7.1 | RowmvrGroupStaticEntry | not-accessible | current | The entry for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.7.1.1 | ColumnmvrGroupStaticAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.7.1.2 | ColumnmvrGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.7.1.3 | ColumnmvrGroupStaticStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.8.2.1.1.44.8 | TablemvrGroupCurrentTable | not-accessible | current | The table for the current members of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.8.1 | RowmvrGroupCurrentEntry | not-accessible | current | The entry for the current members of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.8.1.1 | ColumnmvrGroupCurrentAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.8.1.2 | ColumnmvrGroupCurrentPorts | read-only | current | The complete set of ports currently associated with this MVR group. |
| 1.3.6.1.4.1.259.8.2.1.1.44.9 | TablemvrPortTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.259.8.2.1.1.44.9.1 | RowmvrPortEntry | not-accessible | current | The entry for configuring the MVR port. |
| 1.3.6.1.4.1.259.8.2.1.1.44.9.1.1 | ColumnmvrIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.259.8.2.1.1.44.9.1.2 | ColumnmvrPortType | read-write | current | For configuring the MVR port type. To disable the MVR port type, use the none(0). |
| 1.3.6.1.4.1.259.8.2.1.1.44.9.1.3 | ColumnmvrPortImmediateLeave | read-write | current | To enable immediate leave on MVR port. |
| 1.3.6.1.4.1.259.8.2.1.1.44.9.1.4 | ColumnmvrPortActive | read-only | current | To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); oth… |
| 1.3.6.1.4.1.259.8.2.1.1.44.10 | ScalarmvrRunningStatus | read-only | current | Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of true(1) indicates that all necessary conditions in the MVR environm… |
| 1.3.6.1.4.1.259.8.2.1.1.45 | NodeegressPacketBlockMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.45.1 | TableegressPacketBlockUnknownMcastTable | not-accessible | current | Table to manage the control of unknown multicast egress packet block for ports. |
| 1.3.6.1.4.1.259.8.2.1.1.45.1.1 | RowegressPacketBlockUnknownMcastEntry | not-accessible | current | The conceptual row of egressPacketBlockUnknownMcastTable. |
| 1.3.6.1.4.1.259.8.2.1.1.45.1.1.1 | ColumnegressPacketBlockUnknownMcastIfIndex | not-accessible | current | The port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.259.8.2.1.1.45.1.1.2 | ColumnegressPacketBlockUnknownMcastStatus | read-write | current | Whether unknown multicast egress packet block protection is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.45.2 | TableegressPacketBlockUnknownUcastTable | not-accessible | current | Table to manage the control of unknown unicast egress packet block for ports. |
| 1.3.6.1.4.1.259.8.2.1.1.45.2.1 | RowegressPacketBlockUnknownUcastEntry | not-accessible | current | The conceptual row of unknownUcastTable. |
| 1.3.6.1.4.1.259.8.2.1.1.45.2.1.1 | ColumnegressPacketBlockUnknownUcastIfIndex | not-accessible | current | The port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.259.8.2.1.1.45.2.1.2 | ColumnegressPacketBlockUnknownUcastStatus | read-write | current | Whether unknown unicast egress packet block protection is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.46 | NodedhcpSnoopMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.1 | NodedhcpSnoopGlobal | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.1.1 | ScalardhcpSnoopEnable | read-write | current | This object indicates whether the DHCP Snooping feature is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.46.1.2 | ScalardhcpSnoopVerifyMacAddressEnable | read-write | current | This object indicates whether DHCP Snooping Mac address verification is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.46.1.3 | ScalardhcpSnoopInformationOptionEnable | read-write | current | This object indicates whether the DHCP snooping information option(option 82) feature is enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.46.1.4 | ScalardhcpSnoopInformationOptionPolicy | read-write | current | This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP reques… |
| 1.3.6.1.4.1.259.8.2.1.1.46.2 | NodedhcpSnoopVlan | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.2.1 | TabledhcpSnoopVlanConfigTable | not-accessible | current | A table contains DHCP Snooping configurations of existing VLANs. |
| 1.3.6.1.4.1.259.8.2.1.1.46.2.1.1 | RowdhcpSnoopVlanConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.1 | ColumndhcpSnoopVlanIndex | not-accessible | current | This object indicates the VLAN ID on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.2 | ColumndhcpSnoopVlanEnable | read-write | current | This object indicates whether DHCP Snooping is enabled in this VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.46.3 | NodedhcpSnoopInterface | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.3.1 | TabledhcpSnoopPortConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.8.2.1.1.46.3.1.1 | RowdhcpSnoopPortConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.1 | ColumndhcpSnoopPortIfIndex | not-accessible | current | The ifIndex value of the port or trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.2 | ColumndhcpSnoopPortTrustEnable | read-write | current | This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4 | NodedhcpSnoopBindings | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1 | TabledhcpSnoopBindingsTable | not-accessible | current | A table contains the DHCP bindings information learnt by the device. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1 | RowdhcpSnoopBindingsEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.1 | ColumndhcpSnoopBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.2 | ColumndhcpSnoopBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.3 | ColumndhcpSnoopBindingsAddrType | read-only | current | This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.4 | ColumndhcpSnoopBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.5 | ColumndhcpSnoopBindingsIpAddress | read-only | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.6 | ColumndhcpSnoopBindingsPortIfIndex | read-only | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.7 | ColumndhcpSnoopBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.8.2.1.1.46.5 | NodedhcpSnoopStatistics | |||
| 1.3.6.1.4.1.259.8.2.1.1.46.5.1 | ScalardhcpSnoopTotalForwardedPkts | read-only | current | Indicates the total number of packets subjected to DHCP Snooping is forwarded. |
| 1.3.6.1.4.1.259.8.2.1.1.46.5.3 | ScalardhcpSnoopUntrustedPortDroppedPkts | read-only | current | Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. |
| 1.3.6.1.4.1.259.8.2.1.1.47 | NodeclusterMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.47.1 | ScalarclusterEnable | read-write | current | Enables or disables clustering on the device. |
| 1.3.6.1.4.1.259.8.2.1.1.47.2 | ScalarclusterCommanderEnable | read-write | current | Enables or disables the device as commander in a cluster. |
| 1.3.6.1.4.1.259.8.2.1.1.47.4 | ScalarclusterIpPool | read-write | current | The start internal IP address of a cluster pool. |
| 1.3.6.1.4.1.259.8.2.1.1.47.5 | ScalarclusterClearCandidateTable | read-write | current | Setting this object to clear(2) starts to clear the candidate table. |
| 1.3.6.1.4.1.259.8.2.1.1.47.6 | ScalarclusterRole | read-only | current | The current role of the device in a cluster. commander(1) : The switch is the controlling device in a cluster. candidate(2) : The switch has been discovered by… |
| 1.3.6.1.4.1.259.8.2.1.1.47.7 | ScalarclusterMemberCount | read-only | current | The total number of members in a cluster. |
| 1.3.6.1.4.1.259.8.2.1.1.47.8 | ScalarclusterCandidateCount | read-only | current | The total number of candidates in a cluster. |
| 1.3.6.1.4.1.259.8.2.1.1.47.9 | TableclusterCandidateTable | not-accessible | current | A table listing cluster candidates. |
| 1.3.6.1.4.1.259.8.2.1.1.47.9.1 | RowclusterCandidateEntry | not-accessible | current | A conceptual row containing the information of the candidate. |
| 1.3.6.1.4.1.259.8.2.1.1.47.9.1.1 | ColumnclusterCandidateMacAddr | not-accessible | current | The MAC address of the candidate. |
| 1.3.6.1.4.1.259.8.2.1.1.47.9.1.3 | ColumnclusterCandidateDesc | read-only | current | The description of the candidate. |
| 1.3.6.1.4.1.259.8.2.1.1.47.9.1.4 | ColumnclusterCandidateRole | read-only | current | The role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. act… |
| 1.3.6.1.4.1.259.8.2.1.1.47.10 | TableclusterMemberTable | not-accessible | current | A table listing clustering members. |
| 1.3.6.1.4.1.259.8.2.1.1.47.10.1 | RowclusterMemberEntry | not-accessible | current | A conceptual row containing the information of the member. |
| 1.3.6.1.4.1.259.8.2.1.1.47.10.1.1 | ColumnclusterMemberId | not-accessible | current | The ID of the member. |
| 1.3.6.1.4.1.259.8.2.1.1.47.10.1.2 | ColumnclusterMemberMacAddr | read-only | current | The MAC address of the member. |
| 1.3.6.1.4.1.259.8.2.1.1.47.10.1.3 | ColumnclusterMemberDesc | read-only | current | The description of the member. |
| 1.3.6.1.4.1.259.8.2.1.1.47.10.1.4 | ColumnclusterMemberActive | read-only | current | The active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMem… |
| 1.3.6.1.4.1.259.8.2.1.1.47.11 | NodeclusterMemberAddCtl | |||
| 1.3.6.1.4.1.259.8.2.1.1.47.11.1 | ScalarclusterMemberAddCtlMacAddr | read-write | current | The MAC address of the device associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.8.2.1.1.47.11.2 | ScalarclusterMemberAddCtlId | read-write | current | The member id associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.8.2.1.1.47.11.5 | ScalarclusterMemberAddCtlAction | read-write | current | Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned m… |
| 1.3.6.1.4.1.259.8.2.1.1.47.12 | NodeclusterMemberRemoveCtl | |||
| 1.3.6.1.4.1.259.8.2.1.1.47.12.1 | ScalarclusterMemberRemoveCtlId | read-write | current | The member ID associated with clusterMemberRemoveCtlAction. |
| 1.3.6.1.4.1.259.8.2.1.1.47.12.2 | ScalarclusterMemberRemoveCtlAction | read-write | current | Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to rem… |
| 1.3.6.1.4.1.259.8.2.1.1.48 | NodeipSrcGuardMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.48.1 | TableipSrcGuardConfigTable | not-accessible | current | A table contains the configurations to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.48.1.1 | RowipSrcGuardConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.48.1.1.1 | ColumnipSrcGuardPortIfIndex | not-accessible | current | This object idents the port or trunk which is capable of IP Source Guard feature. |
| 1.3.6.1.4.1.259.8.2.1.1.48.1.1.2 | ColumnipSrcGuardMode | read-write | current | This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1,… |
| 1.3.6.1.4.1.259.8.2.1.1.48.2 | TableipSrcGuardAddrTable | not-accessible | current | A table contains the IP Source Guard bindings information learnt by the device. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1 | RowipSrcGuardAddrEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.1 | ColumnipSrcGuardBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.2 | ColumnipSrcGuardBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.3 | ColumnipSrcGuardBindingsAddrType | read-create | current | This object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.4 | ColumnipSrcGuardBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.5 | ColumnipSrcGuardBindingsIpAddress | read-create | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.6 | ColumnipSrcGuardBindingsPortIfIndex | read-create | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.7 | ColumnipSrcGuardBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.8.2.1.1.48.2.1.8 | ColumnipSrcGuardBindingsStatus | read-create | current | The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.8.2.1.1.52 | NodeoamMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.52.1 | TableoamPortStatusTable | not-accessible | current | A table contains the status of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.1.1 | RowoamPortStatusEntry | not-accessible | current | An entry contains the status of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.1.1.1 | ColumnoamPortIfIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.52.1.1.2 | ColumnoamEnableStatus | read-write | current | This object configures the status of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.2 | TableoamPortModeTable | not-accessible | current | A table contains the mode of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.2.1 | RowoamPortModeEntry | not-accessible | current | An entry contains the mode of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.2.1.1 | ColumnoamPortModeIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.52.2.1.2 | ColumnoamPortMode | read-write | current | This object configures the mode of OAM at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.3 | TableoamPortClearStatTable | not-accessible | current | A table contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.3.1 | RowoamPortClearStatEntry | not-accessible | current | An entry contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.8.2.1.1.52.3.1.1 | ColumnoamPortClearStatIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.52.3.1.2 | ColumnoamClearStatistics | read-write | current | This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when rea… |
| 1.3.6.1.4.1.259.8.2.1.1.52.4 | TableoamLoopbackTable | not-accessible | current | Table for OAM remote loopback test. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1 | RowoamLoopbackEntry | not-accessible | current | Entry for OAM remote loopback test. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.1 | ColumnoamLoopbackTestIfIndex | not-accessible | current | The ifIndex value of the port(excluding trunk). The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.2 | ColumnoamLoopbackTestPacketNumber | read-write | current | Setting the packet number when performing loopback test. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.3 | ColumnoamLoopbackTestPacketSize | read-write | current | Setting the packet size when performing loopback test. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.4 | ColumnoamLoopbackTestAction | read-write | current | Setting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.5 | ColumnoamLoopbackTestResultTx | read-only | current | A count of the the total number of loopback frames transmitted at last loopback test on this interface. |
| 1.3.6.1.4.1.259.8.2.1.1.52.4.1.6 | ColumnoamLoopbackTestResultRx | read-only | current | A count of the the total number of loopback frames received at last loopback test on this interface. |
| 1.3.6.1.4.1.259.8.2.1.1.53 | NoderemoteMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.1 | TableremoteAcceptableFrameTypeTable | not-accessible | current | A table that contains the acceptable frame type configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.1.1 | RowremoteAcceptableFrameTypeEntry | not-accessible | current | An entry that contains the acceptable frame type configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.1.1.1 | ColumnremoteAcceptableFrameTypeIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.1.1.2 | ColumnremoteAcceptableFrameType | read-write | current | This object configures the acceptable frame types at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.2 | TableremoteEepromWriteTable | not-accessible | current | A table contains the information of whether EEPROM is writable at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.2.1 | RowremoteEepromWriteEntry | not-accessible | current | An entry that contains the information of whether EEPROM is writable at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.2.1.1 | ColumnremoteEepromWriteIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.2.1.2 | ColumnremoteEepromWriteEnableStatus | read-write | current | The object configures the status of EEPROM at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.3 | TableremoteFlowControlEnbaleTable | not-accessible | current | A table contains the flow control configuation at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.3.1 | RowremoteFlowControlEnbaleEntry | not-accessible | current | An entry that contains the flow control configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.3.1.1 | ColumnremoteFLIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.3.1.2 | ColumnremoteFlowControlEnbale | read-write | current | The object configures the status of flow control at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.4 | TableremoteNegotiationEnableTable | not-accessible | current | A table contains the auto-negotiation configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.4.1 | RowremoteNegotiationEnableEntry | not-accessible | current | An entry contains the auto-negotiation configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.4.1.1 | ColumnremoteNegoIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.4.1.2 | ColumnremoteNegotiationEnable | read-write | current | The object configures the status of auto negotiation at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.5 | TableremoteShutDownEnableTable | not-accessible | current | A table contains the information of whether shutdown process is enabled at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.5.1 | RowremoteShutDownEnableEntry | not-accessible | current | An entry contains the information of whether shutdown process is enabled at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.5.1.1 | ColumnremoteSDIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.5.1.2 | ColumnremoteShutDownEnable | read-write | current | Enable or disable the remote ShutDown. |
| 1.3.6.1.4.1.259.8.2.1.1.53.6 | TableremoteInputToSwitchTable | not-accessible | current | A table contains the information of whether the input is tagged or untagged at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.6.1 | RowremoteInputToSwitchEntry | not-accessible | current | An entry contains the information of whether the input is tagged or untagged at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.6.1.1 | ColumnremoteInputIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.6.1.2 | ColumnremoteInputToSwitch | read-write | current | The object configures the packet format of input at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.7 | TableremoteOutputToSubscriberTable | not-accessible | current | A table contains the information of whether output to subscriber is tagged or untagged at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.7.1 | RowremoteOutputToSubscriberEntry | not-accessible | current | An entry contains the information of whether output to subscriber is tagged or untagged at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.7.1.1 | ColumnremoteOutputIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.7.1.2 | ColumnremoteOutputToSubscriber | read-write | current | The object configures the packet format of output to subscriber at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.8 | TableremoteSpeedDuplexTable | not-accessible | current | A table contains the speed-duplex configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.8.1 | RowremoteSpeedDuplexEntry | not-accessible | current | An entry contains the speed-duplex configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.8.1.1 | ColumnremoteSpeedDuplexIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.8.1.2 | ColumnremoteSpeedDuplex | read-write | current | The object configures the speed-duplex at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.9 | TableremoteMdixTable | not-accessible | current | A table contains the MDIX configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.9.1 | RowremoteMdixEntry | not-accessible | current | An entry contains the MDIX configuration at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.9.1.1 | ColumnremoteMdixIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.9.1.2 | ColumnremoteMdix | read-write | current | The object configures the MDIX at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10 | TableremoteDefaultTable | not-accessible | current | A table contains the information of default VLAN and priority at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10.1 | RowremoteDefaultEntry | not-accessible | current | An entry contains the information of default VLAN and priority at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10.1.1 | ColumnremoteDefaultIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10.1.2 | ColumnremoteDefaultVlan | read-write | current | The object configures the default VLAN at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10.1.3 | ColumnremoteDefaultPriority | read-write | current | The object configures the default priority at the remote specified device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.10.1.4 | ColumnremoteDefaultEnable | read-write | current | The object is to take effect default VLAN and priority at the remote specified device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11 | TableremoteProtocolVlanTable | not-accessible | current | A table contains the information of protocal VLAN at the remote specified device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1 | RowremoteProtocolVlanEntry | not-accessible | current | An entry contains the information of protocal VLAN at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1.1 | ColumnremoteProtocolVlanIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1.2 | ColumnremoteProtocolVlanEtherType | not-accessible | current | The object configures the Ether type at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1.3 | ColumnremoteProtocolVlanVid | read-write | current | The vlan of each port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1.4 | ColumnremoteProtocolVlanPririty | read-write | current | The object configures the VLAN ID at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.11.1.5 | ColumnremoteProtocolVlanRowStatus | read-create | current | The status of this conceptual row entry. This object is issued to manage the creation and deletion of conceptual rows. The status column has six defined values… |
| 1.3.6.1.4.1.259.8.2.1.1.53.12 | TableremoteQueueCosMapTable | not-accessible | current | A table contains the information of queue number and priority of CoS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.12.1 | RowremoteQueueCosMapEntry | not-accessible | current | An entry contains the information of queue number and priority of CoS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.12.1.1 | ColumnremoteQueueCosMapIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.12.1.2 | ColumnremoteQueueCosMapPriority | not-accessible | current | The object configures the priority at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.12.1.3 | ColumnremoteQueueCosMapQueue | read-write | current | The object configures the queue number of CoS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.12.1.4 | ColumnremoteQueueCosMapEnable | read-write | current | The object is to take effect the queue Cos map setting at the remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13 | NoderemoteQueueModeMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.13.1 | TableremoteQueueModeTable | not-accessible | current | A table contains the information of queue mode at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.1.1 | RowremoteQueueModeEntry | not-accessible | current | An entry contains the information of queue mode at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.1 | ColumnremoteQueueModeIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.2 | ColumnremoteQueueMode | read-write | current | The object configures the queue mode at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.2 | TableremoteWrrPortTable | not-accessible | current | A table contains the information of the weighted round robin (WRR) at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.2.1 | RowremoteWrrPortEntry | not-accessible | current | An entry contains the information of the WRR at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.1 | ColumnremoteWrrPortIfIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.2 | ColumnremoteWrrPortQueueID | not-accessible | current | The object configures the queue ID of WRR at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.3 | ColumnremoteWrrPortWeight | read-write | current | The object configures the weight of WRR at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14 | NoderemoteMapTagPriorityMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.14.1 | TableremoteMapTagPriStatusTable | not-accessible | current | A table contains the status of tag-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.1.1 | RowremoteMapTagPriStatusEntry | not-accessible | current | An entry contains the status of tag-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.1 | ColumnremoteMapTagPriStatusIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.2 | ColumnremoteMapTagPriStatus | read-write | current | The object configures the status of tap-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.2 | TableremoteMapTagPriorityTable | not-accessible | current | A table contains the information of tag-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.2.1 | RowremoteMapTagPriorityEntry | not-accessible | current | An entry contains the information of tag-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.1 | ColumnremoteMapTagPriorityIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.2 | ColumnremoteMapTagPriority | not-accessible | current | The object shows the tap-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.3 | ColumnremoteMapTagPriorityPri | read-write | current | The object configures the priority of tap-priority map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15 | NoderemoteMapTosMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.15.1 | TableremoteMapTosStatusTable | not-accessible | current | A table contains the status of ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.1.1 | RowremoteMapTosStatusEntry | not-accessible | current | An entry contains the status of ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.1 | ColumnremoteMapTosStatusIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.2 | ColumnremoteMapTosEnableStatus | read-write | current | The object configures the status of ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2 | TableremoteMapTosTable | not-accessible | current | A table contains the information of ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2.1 | RowremoteMapTosEntry | not-accessible | current | An entry contains the information of the TOS map at the remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.1 | ColumnremoteMapTosIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.2 | ColumnremoteMapTos | not-accessible | current | The object shows the ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.3 | ColumnremoteMapTosPri | read-write | current | The object configures the the priority of ToS map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.4 | ColumnremoteMapTosStatus | read-create | current | The status of this conceptual row entry. This object is isused to manage the creation and deletion of conceptual rows. The status column has six defined values… |
| 1.3.6.1.4.1.259.8.2.1.1.53.16 | NoderemoteMapTrafficClassMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.16.1 | TableremoteMapTrafficClassStatusTable | not-accessible | current | A table contains the status of traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.1.1 | RowremoteMapTrafficClassStatusEntry | not-accessible | current | An entry contains the status of traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.1 | ColumnremoteMapTCStatusIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.2 | ColumnremoteMapTCEnableStatus | read-write | current | The object configures the status of traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2 | TableremoteMapTrafficClassTable | not-accessible | current | A table contains the information of traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2.1 | RowremoteMapTrafficClassEntry | not-accessible | current | An entry contains the information of traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.1 | ColumnremoteMapTrafficClassIfIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.2 | ColumnremoteMapTrafficClass | not-accessible | current | The object shows the traffic class map at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.3 | ColumnremoteMapCos | read-write | current | The object configures the value of CoS at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.4 | ColumnremoteMapTrafficClassStatus | read-create | current | The status of this conceptual row entry. This object is issued to manage the creation and deletion of conceptual rows. For the following, check the corrections… |
| 1.3.6.1.4.1.259.8.2.1.1.53.17 | TableremoteFactoryDefaultTable | not-accessible | current | A table contains the factory default setting at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.17.1 | RowremoteFactoryDefaultEntry | not-accessible | current | An entry contains the factory default setting at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.17.1.1 | ColumnremoteFactoryDefaultIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.17.1.2 | ColumnremoteFactoryDefault | read-write | current | This object is to apply the factory default setting at the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18 | TableremoteDeviceStatisticTable | not-accessible | current | A table shows the statistics for each remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1 | RowremoteDeviceStatisticEntry | not-accessible | current | An entry shows the statistics for each remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1.1 | ColumnremoteStatisticPortIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1.2 | ColumnremoteDeviceStatisticIfIndex | not-accessible | current | This object shows the ifIndex value of the remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1.3 | ColumnremoteTxPausePacket | read-only | current | The total number of pause frames transmitted from the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1.4 | ColumnremoteRxPausePacket | read-only | current | The total number of pause frames received from the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.18.1.5 | ColumnremoteRxErrorPacket | read-only | current | The total number of error frames received from the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19 | TableremoteQueuePacketStatisticTable | not-accessible | current | A table contains the packet statistics of each queue for the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1 | RowremoteQueuePacketStatisticEntry | not-accessible | current | An entry contains the packet statistics of each queue for the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1.1 | ColumnremoteQueuePacketStatisticPortIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1.2 | ColumnremoteQueuePacketDeviceStatisticIfIndex | not-accessible | current | This object shows the ifIndex value of the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1.3 | ColumnremoteQueuePacketQueueIndex | not-accessible | current | This object shows the index of packet queue of the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1.4 | ColumnremoteQueueDropPacket | read-only | current | The total number of packets dropped by the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.19.1.5 | ColumnremoteQueueForwardingPacket | read-only | current | The total number of packets forwarded by the remote device's port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.20 | TableremoteMacAddressTable | not-accessible | current | A table contains the MAC address of the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.20.1 | RowremoteMacAddressEntry | not-accessible | current | An entry contains the MAC address of the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.20.1.1 | ColumnremoteMacAddressIfIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.8.2.1.1.53.20.1.2 | ColumnremoteMacAddress | read-write | current | This object shows the MAC address of the specified remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.20.1.3 | ColumnremoteMacAddressStatus | read-write | current | This object shows the information of whether the MAC address of the remote device is valided. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21 | NoderemoteDeviceMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.21.1 | ScalarremoteDeviceReset | read-write | current | To reset the remote device which is connected to a port, assign remoteDeviceReset to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this… |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.2 | ScalarremoteDeviceFactoryDefault | read-write | current | To reset the remote device which is connected to a port and restore the default setting, assign remoteDeviceFactoryDefault to the value of ifIndex defined by t… |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.3 | TableremoteAccessPointTable | not-accessible | current | Contains the access point setting of CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.3.1 | RowremoteAccessPointEntry | not-accessible | current | A conceptual row in the remoteAccessPoint table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.1 | ColumnremoteAccessPointLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.2 | ColumnremoteAccessPointStatus | read-write | current | Set this to enabled(1) to enable the Wireless Access Point function. Sets disabled(2) to disable the Wireless Access Point function. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4 | TableremoteDhcpServerTable | not-accessible | current | Contains the DHCP server setting of CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1 | RowremoteDhcpServerEntry | not-accessible | current | A conceptual row in the remoteDhcpServer table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.1 | ColumnremoteDhcpServerLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.2 | ColumnremoteDhcpServerStatus | read-write | current | If this is enabled(1), the remote device acts as a DHCP server on the LAN side. If this is disabled(2), the remote device does not act as a DHCP server. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.3 | ColumnremoteDhcpServerIpAddress | read-only | current | The IP address of DHCP server at remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.4 | ColumnremoteDhcpServerSubnetMask | read-only | current | The subnet mask of DHCP server at remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.5 | ColumnremoteDhcpServerGateway | read-only | current | The IP Address of the default gateway at remote device. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.5 | TableremoteVlanTable | not-accessible | current | Contains the VLAN settings of CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.5.1 | RowremoteVlanEntry | not-accessible | current | A conceptual row in the remoteVlan table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.1 | ColumnremoteVlanLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.2 | ColumnremoteVlanId | not-accessible | current | Specifiies the VLAN ID. |
| 1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.3 | ColumnremoteVlanStatus | read-create | current | Set valid(1) to create the VLAN. Set invalid(2) to delete the VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22 | NoderemotePortMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.53.22.1 | TableremotePortAdminTable | not-accessible | current | Contains the admin status of LAN ports on CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.1.1 | RowremotePortAdminEntry | not-accessible | current | A conceptual row in the remotePortAdmin table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.1 | ColumnremotePortAdminLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.2 | ColumnremotePortAdminRemotePort | not-accessible | current | The port interface of remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.3 | ColumnremotePortAdminStatus | read-write | current | If this is enabled(1), the remote port is in enabled. If this is disabled(2), the remote port is not in enabled. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.2 | TableremotePortPvidTable | not-accessible | current | Contains the VID of LAN ports on CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.2.1 | RowremotePortPvidEntry | not-accessible | current | A conceptual row in the remotePortPvid table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.1 | ColumnremotePortPvidLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.2 | ColumnremotePortPvidRemotePort | not-accessible | current | The port interface of remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.3 | ColumnremotePortPvid | read-write | current | Sets default VLAN on remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.3 | TableremotePortPriorityTable | not-accessible | current | Contains the priority of LAN ports on CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.3.1 | RowremotePortPriorityEntry | not-accessible | current | A conceptual row in the remotePortPriority table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.1 | ColumnremotePortPriorityLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.2 | ColumnremotePortPriorityRemotePort | not-accessible | current | The port interface of remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.3 | ColumnremotePortPriority | read-write | current | Sets default priority on remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.4 | TableremotePortIgmpSnoopingTable | not-accessible | current | Contains the IGMP snooping status of LAN ports on CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.4.1 | RowremotePortIgmpSnoopingEntry | not-accessible | current | A conceptual row in the remotePortIgmpSnooping table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.1 | ColumnremotePortIgmpSnoopingLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.2 | ColumnremotePortIgmpSnoopingRemotePort | not-accessible | current | The port interface of remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.3 | ColumnremotePortIgmpSnooping | read-write | current | If this is enabled(1), IGMP snooping is enabled on the remote port. If this is disabled(2), IGMP snooping is disabled on the remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5 | TableremotePortCountersTable | not-accessible | current | Contains the information of LAN ports on CPE. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1 | RowremotePortCountersEntry | not-accessible | current | A conceptual row in the remotePortCounters table. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.1 | ColumnremotePortCountersLocalPort | not-accessible | current | The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.2 | ColumnremotePortCountersRemotePort | not-accessible | current | The port interface of remote device. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.3 | ColumnremotePortCountersInUnicastSupported | read-only | current | A value of true(1) indicates that supports receiving unicast packet counts. A value of false(2) indicates that not support receiving unicast packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.4 | ColumnremotePortCountersInUnicast | read-only | current | The total number of unicast packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.5 | ColumnremotePortCountersInBroadcastSupported | read-only | current | A value of true(1) indicates that supports receiving broadcast packet counts. A value of false(2) indicates that not support receiving broadcast packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.6 | ColumnremotePortCountersInBroadcast | read-only | current | The total number of broadcasts packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.7 | ColumnremotePortCountersInPauseSupported | read-only | current | A value of true(1) indicates that supports receiving pause packet counts. A value of false(2) indicates that not support receiving pause packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.8 | ColumnremotePortCountersInPause | read-only | current | The total number of pause packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.9 | ColumnremotePortCountersInMulticastSupported | read-only | current | A value of true(1) indicates that supports receiving multicast packet counts. A value of false(2) indicates that not support receiving multicast packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.10 | ColumnremotePortCountersInMulticast | read-only | current | The total number of multicasts packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.11 | ColumnremotePortCountersOutUnicastSupported | read-only | current | A value of true(1) indicates that supports transmitting unicast packet counts. A value of false(2) indicates that not support transmitting unicast packet count… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.12 | ColumnremotePortCountersOutUnicast | read-only | current | The total number of unicast packets transmitted from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.13 | ColumnremotePortCountersOutBroadcastSupported | read-only | current | A value of true(1) indicates that supports transmitting broadcast packet counts. A value of false(2) indicates that not support transmitting broadcast packet c… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.14 | ColumnremotePortCountersOutBroadcast | read-only | current | The total number of broadcast packets transmitted from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.15 | ColumnremotePortCountersOutMulticastSupported | read-only | current | A value of true(1) indicates that supports transmitting multicast packet counts. A value of false(2) indicates that not support transmitting multicast packet c… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.16 | ColumnremotePortCountersOutMulticast | read-only | current | The total number of multicast packets transmitted from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.17 | ColumnremotePortCountersInFcsErrorsSupported | read-only | current | A value of true(1) indicates that supports receiving FCS error packet counts. A value of false(2) indicates that not support receiving FCS error packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.18 | ColumnremotePortCountersInFcsErrors | read-only | current | The total number of FCS error packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.19 | ColumnremotePortCountersOutFcsErrorsSupported | read-only | current | A value of true(1) indicates that supports transmitting FCS error packet counts. A value of false(2) indicates that not support transmitting FCS error packet c… |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.20 | ColumnremotePortCountersOutFcsErrors | read-only | current | The total number of FCS error packets transmitted from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.21 | ColumnremotePortCountersInGoodOctetsSupported | read-only | current | A value of true(1) indicates that supports receiving normal packet counts. A value of false(2) indicates that not support receiving normal packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.22 | ColumnremotePortCountersInGoodOctets | read-only | current | The total number of normal packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.23 | ColumnremotePortCountersOutGoodOctetsSupported | read-only | current | A value of true(1) indicates that supports transmitting normal packet counts. A value of false(2) indicates that not support transmitting normal packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.24 | ColumnremotePortCountersOutGoodOctets | read-only | current | The total number of normal packets transmitted from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.25 | ColumnremotePortCountersInBadOctetsSupported | read-only | current | A value of true(1) indicates that supports receiving bad packet counts. A value of false(2) indicates that not support receiving bad packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.26 | ColumnremotePortCountersInBadOctets | read-only | current | The total number of bad packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.27 | ColumnremotePortCountersInDiscardsSupported | read-only | current | A value of true(1) indicates that supports receiving discard packet counts. A value of false(2) indicates that not support receiving discard packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.28 | ColumnremotePortCountersInDiscards | read-only | current | The total number of discard packets received from remote port. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.29 | ColumnremotePortCountersAlignmentErrorsSupported | read-only | current | A value of true(1) indicates that supports align error packet counts. A value of false(2) indicates that not support alignment error packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.30 | ColumnremotePortCountersAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.31 | ColumnremotePortCountersUndersizeErrorsSupported | read-only | current | A value of true(1) indicates that supports under error packet counts. A value of false(2) indicates that not support under error packet counts. |
| 1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.32 | ColumnremotePortCountersUndersizeErrors | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.259.8.2.1.1.56 | NodedynamicArpInspectionMgt | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.1 | NodedaiGlobal | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.1.1 | ScalardaiGlobalStatus | read-write | current | Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.2 | ScalardaiGlobalSrcMacValidation | read-write | current | Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.3 | ScalardaiGlobalDestMacValidation | read-write | current | Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.4 | ScalardaiGlobalIpAddrValidation | read-write | current | Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.5 | ScalardaiGlobalLogNumber | read-write | current | The number of log buffers for saving log message. The value 0 means not generating system messages. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.6 | ScalardaiGlobalLogInterval | read-write | current | The value of the time interval for saving log messages. |
| 1.3.6.1.4.1.259.8.2.1.1.56.1.7 | ScalardaiGlobalAdditionalValidStatus | read-only | current | The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; e… |
| 1.3.6.1.4.1.259.8.2.1.1.56.2 | NodedaiVlan | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1 | TabledaiVlanTable | not-accessible | current | A table contains dynamic ARP inspection configurations for existing VLANs. |
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1.1 | RowdaiVlanEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection for each existing VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.1 | ColumndaiVlanIndex | not-accessible | current | This object indicates the VLAN ID on which dynamic ARP inspection is configured. |
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.2 | ColumndaiVlanStatus | read-write | current | This object indicates whether dynamic ARP inspection is enabled in this VLAN. |
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.3 | ColumndaiVlanArpAclName | read-write | current | Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). |
| 1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.4 | ColumndaiVlanArpAclStatus | read-write | current | Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping bindin… |
| 1.3.6.1.4.1.259.8.2.1.1.56.3 | NodedaiInterface | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.3.1 | TabledaiPortTable | not-accessible | current | A table containing dynamic ARP inspection configurations for port interfaces. |
| 1.3.6.1.4.1.259.8.2.1.1.56.3.1.1 | RowdaiPortEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection at each port interface. |
| 1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.1 | ColumndaiPortIfIndex | not-accessible | current | The ifIndex value of the port. |
| 1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.2 | ColumndaiPortTrustStatus | read-write | current | This object indicates whether the port is trusted for dynamic ARP inspection. |
| 1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.3 | ColumndaiPortRateLimit | read-write | current | The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4 | NodedaiLog | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1 | TabledaiLogTable | not-accessible | current | A table containing dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1 | RowdaiLogEntry | not-accessible | current | An instance containing log information of dynamic ARP inspection at each VLAN interface. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.1 | ColumndaiLogIndex | not-accessible | current | This object indicates the index of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.2 | ColumndaiLogVlan | read-only | current | This object indicates the VLAN ID of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.3 | ColumndaiLogPort | read-only | current | This object indicates the ifIndex of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.4 | ColumndaiLogSrcIpAddress | read-only | current | The source IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.5 | ColumndaiLogDestIpAddress | read-only | current | The destination IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.6 | ColumndaiLogSrcMacAddress | read-only | current | The source MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.7 | ColumndaiLogDestMacAddress | read-only | current | The destination MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5 | NodedaiStatistics | |||
| 1.3.6.1.4.1.259.8.2.1.1.56.5.1 | ScalardaiTotalReceivedPkts | read-only | current | Indicates the total number of ARP packets received before rate limiting. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.2 | ScalardaiTotalDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped due to rate limt. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.3 | ScalardaiTotalProcessedPkts | read-only | current | Indicates the total number of ARP packets processed by ARP inspection. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.4 | ScalardaiTotalSrcMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by source MAC address validation. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.5 | ScalardaiTotalDestMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by destination MAC address validation. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.6 | ScalardaiTotalIpAddrDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by IP address validation. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.7 | ScalardaiTotalArpAclDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by ARP ACL. |
| 1.3.6.1.4.1.259.8.2.1.1.56.5.8 | ScalardaiTotalDhcpSnoopingDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by DHCP snooping. |
| 1.3.6.1.4.1.259.8.2.1.2 | Nodees3528Notifications | |||
| 1.3.6.1.4.1.259.8.2.1.2.1 | Nodees3528Traps | |||
| 1.3.6.1.4.1.259.8.2.1.2.1.0 | Nodees3528TrapsPrefix | |||
| 1.3.6.1.4.1.259.8.2.1.2.1.0.1 | NotificationswPowerStatusChangeTrap | current | This trap is sent when the power state changes. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.17 | NotificationswFanFailureTrap | current | This trap is sent when the fan is failure. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.18 | NotificationswFanRecoverTrap | current | This trap is sent when fan failure has recovered. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.36 | NotificationswPortSecurityTrap | current | This trap is sent when the port is being intruded. This trap will only be sent when the portSecActionTrap is enabled. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.40 | NotificationswIpFilterRejectTrap | current | This trap is sent when an incorrect IP address is rejected by the ipfilter. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.41 | NotificationswSmtpConnFailureTrap | current | This trap is triggered if the SMTP system cannot open a connection to the mail server successfully. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.56 | NotificationswMainBoardVerMismatchNotificaiton | current | This trap is sent when the slave version is mismatch with the master version. This trap will binds two object, the first object indicate the master version, wh… | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.57 | NotificationswModuleVerMismatchNotificaiton | current | This trap is sent when the module version is mismatch with the main board version. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.58 | NotificationswThermalRisingNotification | current | This trap is sent when the temperature is over the switchThermalActionRisingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.59 | NotificationswThermalFallingNotification | current | This trap is sent when the temperature is below the switchThermalActionFallingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.60 | NotificationswModuleInsertionNotificaiton | current | This trap is sent when the module is inserted. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.61 | NotificationswModuleRemovalNotificaiton | current | This trap is sent when the module is removed. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.78 | NotificationswMajorAlarm | current | This trap is fired when the major alarm event occured. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.79 | NotificationswMinorAlarm | current | This trap is fired when the minor alarm event occured. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.90 | NotificationswAlarmInput | current | This trap is fired when the alarm input event occured. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.97 | Notificationdot1agCfmMepUpTrap | current | This trap is sent when a new remote MEP is discovered. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.98 | Notificationdot1agCfmMepDownTrap | current | This trap is sent when received port status or interface status TLV from remote MEP is not up. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.99 | Notificationdot1agCfmConfigFailTrap | current | This trap is sent when a MEP receives a CCM with MPID which already exists on the same MA in this switch. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.100 | Notificationdot1agCfmLoopFindTrap | current | This trap is sent when a MEP receives its own CCMs. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.101 | Notificationdot1agCfmMepUnknownTrap | current | This trap is sent when a CCM is received from an unexpected MEP. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.102 | Notificationdot1agCfmMepMissingTrap | current | This trap is sent when the cross-check enable timer expires and no CCMs were received from an expected (configured) MEP. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.103 | Notificationdot1agCfmMaUpTrap | current | This trap is sent when all expected remote MEPs are up. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.104 | NotificationautoUpgradeTrap | current | This trap is sent when auto upgrade is executed. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.107 | NotificationswCpuUtiRisingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiRisingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.108 | NotificationswCpuUtiFallingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiFallingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.109 | NotificationswMemoryUtiRisingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiRisingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.2.1.0.110 | NotificationswMemoryUtiFallingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiFallingThreshold. | |
| 1.3.6.1.4.1.259.8.2.1.3 | Nodees3528Conformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FileCopyStatus | INTEGER { fileCopyTftpUndefError(1), fileCopyTftpFileNotFound(2), fileCopyTftpAccessViolation(3), fileCopyTftpDiskFull(4), fileCopyTftpIllegalOperation(5), fileCopyTftpUnkownTransferId(6), fileCopyTftpFileExisted(7), fileCopyTftpNoSuchUser(8), fileCopyTftpTimeout(9), fileCopyTftpSendError(10), fileCopyTftpReceiverError(11), fileCopyTftpSocketOpenError(12), fileCopyTftpSocketBindError(13), fileCopyTftpUserCancel(14), fileCopyTftpCompleted(15), fileCopyParaError(16), fileCopyBusy(17), fileCopyUnknown(18), fileCopyReadFileError(19), fileCopySetStartupError(20), fileCopyFileSizeExceed(21), fileCopyMagicWordError(22), fileCopyImageTypeError(23), fileCopyHeaderChecksumError(24), fileCopyImageChecksumError(25), fileCopyWriteFlashFinish(26), fileCopyWriteFlashError(27), fileCopyWriteFlashProgramming(28), fileCopyError(29), fileCopySuccess(30), fileCopyCompleted(31) } | current | The file copy result status. |
| KeySegment | DisplayString(SIZE(0..128)) | current | The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257… |
| OspfAreaID | IpAddress | current | An OSPF Area Identifier. |
| OspfBigMetric | Integer32 (0..'FFFFFE'h) | current | The OSPF External Metric. |
| StaPathCostMode | INTEGER { short(1), long(2) } | current | The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost a… |
| ValidStatus | INTEGER { valid(1), invalid(2) } | current | A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr… |