MIB Viewer

ES4626-50-MIB

1432 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1215TRAP-TYPE
RFC1155-SMIenterprises
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 experimental Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.259Nodeaccton
1.3.6.1.4.1.259.8NodesnmpMgt
1.3.6.1.4.1.259.8.1NodecheetahSwitchMgt
1.3.6.1.4.1.259.8.1.2Nodees4626-50
1.3.6.1.4.1.259.8.1.2.100Nodeos
1.3.6.1.4.1.259.8.1.2.100.1NodepriSystem
1.3.6.1.4.1.259.8.1.2.100.1.1ScalarsysResetUnitread-writecurrentsetfactory(2) coldReset(3) noReset(1) default the status is 1
1.3.6.1.4.1.259.8.1.2.100.1.2ScalarsysHardwareVersionread-onlycurrentThe version information of switch hardware
1.3.6.1.4.1.259.8.1.2.100.1.3ScalarsysSoftwareVersionread-onlycurrentThe version information of switch software
1.3.6.1.4.1.259.8.1.2.100.1.4ScalarsysStackFlagread-onlycurrentIf it is the status of stacking
1.3.6.1.4.1.259.8.1.2.100.1.5ScalarsysCPUMacread-onlycurrentThe MAC Address is used for switch data transfers
1.3.6.1.4.1.259.8.1.2.100.1.6ScalarsysWriteConfigread-writecurrentwrite(1)save the current configuration
1.3.6.1.4.1.259.8.1.2.100.1.7TablesysPowerStateTablenot-accessiblecurrentthe power supply status is only used for chassis switch
1.3.6.1.4.1.259.8.1.2.100.1.7.1RowsysPowerStateEntrynot-accessiblecurrentpower supply status
1.3.6.1.4.1.259.8.1.2.100.1.7.1.1ColumnsysPowerSlotIndexnot-accessiblecurrentModule model No.
1.3.6.1.4.1.259.8.1.2.100.1.7.1.2ColumnsysPowerStateread-onlycurrentif the power supply insert
1.3.6.1.4.1.259.8.1.2.100.1.7.1.3ColumnsysPowerValueread-onlycurrentPower Value
1.3.6.1.4.1.259.8.1.2.100.1.7.1.4ColumnsysPowerTyperead-onlycurrentPower Type
1.3.6.1.4.1.259.8.1.2.100.1.7.1.5ColumnsysPowerStatusread-onlycurrentPower Status
1.3.6.1.4.1.259.8.1.2.100.1.8TablesysSlotTablenot-accessiblecurrentmachine information,it is only used by chassis.
1.3.6.1.4.1.259.8.1.2.100.1.8.1RowsysSlotEntrynot-accessiblecurrentSwitch information
1.3.6.1.4.1.259.8.1.2.100.1.8.1.1ColumnsysSlotIndexnot-accessiblecurrentModule Model No.
1.3.6.1.4.1.259.8.1.2.100.1.8.1.2ColumnsysCPUTyperead-onlycurrentCPU type
1.3.6.1.4.1.259.8.1.2.100.1.8.1.3ColumnsysCPUFiveSecondIdleread-onlycurrentLast 5 second CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.8.1.4ColumnsysCPUThirtySecondIdleread-onlycurrentLast 30 second CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.8.1.5ColumnsysCPUFiveMinuteIdleread-onlycurrentLast 5 minute CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.8.1.6ColumnsysCPUIdleread-onlycurrentFrom running CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.8.1.7ColumnsysMemorySizeread-onlycurrentmemory size
1.3.6.1.4.1.259.8.1.2.100.1.8.1.8ColumnsysMemoryBusyread-onlycurrentmemory usage rent
1.3.6.1.4.1.259.8.1.2.100.1.8.1.9ColumnsysFlashSizeread-onlycurrentThe flash capacity of this slot.
1.3.6.1.4.1.259.8.1.2.100.1.8.1.10ColumnsysTemperatureread-onlycurrentThe Temperature of this slot.80 is 80centigrade
1.3.6.1.4.1.259.8.1.2.100.1.8.1.11ColumnsysCpuUsageread-onlycurrentThe CPU usage of this slot.
1.3.6.1.4.1.259.8.1.2.100.1.9TableswitchInfoTablenot-accessiblecurrentTable of descriptive and status information about switches in this system.
1.3.6.1.4.1.259.8.1.2.100.1.9.1RowswitchInfoEntrynot-accessiblecurrentAn entry in the table, containing information about a single switch in this system.
1.3.6.1.4.1.259.8.1.2.100.1.9.1.1ColumnswSlotIndexread-onlycurrentThis object identifies the slot within the switch for which this entry contains information. While for the chassis device, the value is real switch slot number.
1.3.6.1.4.1.259.8.1.2.100.1.9.1.2ColumnswUnitIndexread-onlycurrentThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
1.3.6.1.4.1.259.8.1.2.100.1.9.1.3ColumnswModuleTyperead-onlycurrentType of expansion module in this switch slot.
1.3.6.1.4.1.259.8.1.2.100.1.10NodeswitchFileCopy
1.3.6.1.4.1.259.8.1.2.100.1.10.1ScalarfileUserNameread-writecurrentftp user name
1.3.6.1.4.1.259.8.1.2.100.1.10.2ScalarfileUserPasswordread-writecurrentftp user password
1.3.6.1.4.1.259.8.1.2.100.1.10.3ScalarfileIPaddressread-writecurrentftp or tftp server ip address
1.3.6.1.4.1.259.8.1.2.100.1.10.4ScalarsourceFileCopyread-writecurrentSource file name or Copy from current system configuration .
1.3.6.1.4.1.259.8.1.2.100.1.10.5ScalardestinationFileCopyread-writecurrentDestination file name or Copy to startup configuration.
1.3.6.1.4.1.259.8.1.2.100.1.10.6ScalarfileCopyModeread-writecurrentascii(0): ASCII file mode; binary(1): Binary file mode.
1.3.6.1.4.1.259.8.1.2.100.1.10.7ScalarfileCopyUseModeread-writecurrentftp(1): ftp server or client; tftp(2): tftp server or client.
1.3.6.1.4.1.259.8.1.2.100.1.10.8ScalarfileCopyread-writecurrentFile copy configurate.
1.3.6.1.4.1.259.8.1.2.100.1.10.9ScalarfileCopyResultread-onlycurrentThe result of file copy:error(0):copy file failure;ok(1):copy file success; uploading(2):in process of upload file;downloading(3):in process of download file; …
1.3.6.1.4.1.259.8.1.2.100.1.11NodeswitchInfo
1.3.6.1.4.1.259.8.1.2.100.1.11.1ScalarswitchCPUTyperead-onlycurrentThe CPU type of switch
1.3.6.1.4.1.259.8.1.2.100.1.11.2ScalarswitchCPUFiveSecondIdleread-onlycurrentLast 5 second CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.11.3ScalarswitchCPUThirtySecondIdleread-onlycurrentLast 30 second CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.11.4ScalarswitchCPUFiveMinuteIdleread-onlycurrentLast 5 minute CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.11.5ScalarswitchCPUIdleread-onlycurrentFrom running CPU IDLE
1.3.6.1.4.1.259.8.1.2.100.1.11.6ScalarswitchMemorySizeread-onlycurrentmemory size
1.3.6.1.4.1.259.8.1.2.100.1.11.7ScalarswitchMemoryBusyread-onlycurrentmemory usage rent
1.3.6.1.4.1.259.8.1.2.100.1.11.8ScalarswitchFlashSizeread-onlycurrentThe flash capacity of switch.
1.3.6.1.4.1.259.8.1.2.100.1.11.9ScalarswitchTemperatureread-onlycurrentThe Temperature of switch.80 is 80centigrade
1.3.6.1.4.1.259.8.1.2.100.1.11.10ScalarswitchCpuUsageread-onlycurrentThe CPU usage of switch.
1.3.6.1.4.1.259.8.1.2.100.1.12TablesysFanTablenot-accessiblecurrentthe state of fan.
1.3.6.1.4.1.259.8.1.2.100.1.12.1RowsysFanEntrynot-accessiblecurrentfan supply status
1.3.6.1.4.1.259.8.1.2.100.1.12.1.1ColumnsysFanIndexnot-accessiblecurrentsystem fan entry index
1.3.6.1.4.1.259.8.1.2.100.1.12.1.2ColumnsysFanInsertedread-onlycurrentWhether the slot fan is installed or not.
1.3.6.1.4.1.259.8.1.2.100.1.12.1.3ColumnsysFanStatusread-onlycurrentWhether the slot fan is normal or abnormal.
1.3.6.1.4.1.259.8.1.2.100.1.12.1.4ColumnsysFanSpeedread-writecurrentStatus of Fan. Status: Low(1), Medium(2), High(3), none(0) is readonly
1.3.6.1.4.1.259.8.1.2.100.2NodepriSpanningTree
1.3.6.1.4.1.259.8.1.2.100.2.1ScalarspanGlobalEnableread-writecurrentEnable or disable the Spanning Tree algorithm in the switch.
1.3.6.1.4.1.259.8.1.2.100.2.2NodemstpMgt
1.3.6.1.4.1.259.8.1.2.100.2.2.1NodemstpSystemGroup
1.3.6.1.4.1.259.8.1.2.100.2.2.1.1ScalarmstpEnableread-createcurrentEnable or disable the Spanning Tree algorithm in the switch.
1.3.6.1.4.1.259.8.1.2.100.2.2.1.2ScalarmstpTCFlushread-createcurrentconfigure global style of TC FLUSH
1.3.6.1.4.1.259.8.1.2.100.2.2.1.3ScalarmstpForwardTimeread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.259.8.1.2.100.2.2.1.4ScalarmstpHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.259.8.1.2.100.2.2.1.5ScalarmstpMaxageread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.259.8.1.2.100.2.2.1.6ScalarmstpMaxhopread-createcurrentsetting global Maxhop of mstp
1.3.6.1.4.1.259.8.1.2.100.2.2.1.7ScalarmstpModeread-createcurrentsetting global mode of mstp,stp or rstp
1.3.6.1.4.1.259.8.1.2.100.2.2.1.8ScalarmstpNameread-createcurrentsetting the name of mst
1.3.6.1.4.1.259.8.1.2.100.2.2.1.9ScalarmstpRevisionLevelread-createcurrentsetting the global revision level of mstp
1.3.6.1.4.1.259.8.1.2.100.2.2.1.10ScalarmstpBridgeForwardDelayread-createcurrentsetting global Forwardtime of mstp
1.3.6.1.4.1.259.8.1.2.100.2.2.1.11ScalarmstpBridgeHelloTimeread-createcurrentsetting global HelloTime of mstp
1.3.6.1.4.1.259.8.1.2.100.2.2.1.12ScalarmstpBridgeMaxageread-createcurrentsetting global Maxage of mstp
1.3.6.1.4.1.259.8.1.2.100.2.2.2TablemstpInstanceTablenot-accessiblecurrentcorrelative information list with instance
1.3.6.1.4.1.259.8.1.2.100.2.2.2.1RowmstpInstanceEntrynot-accessiblecurrentThe index of this table is instance ID
1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.1ColumnmstpInstanceIDnot-accessiblecurrentinstance ID
1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.2ColumnmstpInstanceVlansread-createcurrentthe map of vlans to instance.The input format is consonant with cli.
1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.3ColumnmstpInstanceSwitchPriorityread-createcurrentThe priority of the router in the special instance.
1.3.6.1.4.1.259.8.1.2.100.2.2.3TablemstpInstancePortTablenot-accessiblecurrentinterrelated parameter list of instance and port
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1RowmstpInstancePortEntrynot-accessiblecurrentThe index of this table is instance ID and port index
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.1ColumnmstpInstancePortInstanceIDnot-accessiblecurrentinstance ID
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.2ColumnmstpInstancePortPortIndexnot-accessiblecurrentport index
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.3ColumnmstpInstancePortCostread-createcurrentport cost of port under the special instance
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.4ColumnmstpInstancePortPriorityread-createcurrentport priority of port under the special instance
1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.5ColumnmstpInstancePortRootGuardread-createcurrentrootguard enable/disable on the current instance
1.3.6.1.4.1.259.8.1.2.100.2.2.4TablemstpPortInfoTablenot-accessiblecurrentmstp information list of port
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1RowmstpPortInfoEntrynot-accessiblecurrentThe index of this table is port index
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.1ColumnmstpPortInfoPortIndexnot-accessiblecurrentport index
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.2ColumnmstpPortInfoEnableread-createcurrentenable/disable mstp on the port.
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.3ColumnmstpPortLinkTyperead-createcurrentthe p2p link type of the port
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.4ColumnmstpPortMcheckread-createcurrenttrigger/untrigger
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.5ColumnmstpPortPortFastread-createcurrentdefault:the port mode is portfast mode bpdufilter:the port mode is portfast mode with bpdufilter bpduguard:the port mode is portfast mode with bpduguard noport…
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.6ColumnmstpPortFormatread-createcurrentwhich mode can be setted up port of message format function
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.7ColumnmstpPortDigestSnpread-createcurrentWhether the port use peer's authentication key
1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.8ColumnmstpPortTCFlushread-createcurrentwhen topology is changed, how to flush the mac
1.3.6.1.4.1.259.8.1.2.100.3NodepriPorts
1.3.6.1.4.1.259.8.1.2.100.3.1ScalarportCountread-onlycurrentThe total number of ports in the system.
1.3.6.1.4.1.259.8.1.2.100.3.2TableportTablenot-accessiblecurrentA list of port entries.
1.3.6.1.4.1.259.8.1.2.100.3.2.1RowpriPortEntrynot-accessiblecurrentA port entry containing port information, status, and control.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.1ColumnportIndexread-onlycurrentport No.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.2ColumnportNameread-onlycurrentName of the port. exp:financial.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.3ColumnswitchNumread-onlycurrentThis value is denoting the number of swith in which this port resides. For the non-stackable device,the value is always 1. While for the stackable device, the …
1.3.6.1.4.1.259.8.1.2.100.3.2.1.4ColumnslotNumread-onlycurrentThis value is denoting the number of slot. For the static slot,the value is 1,while for the extended slot the value is real extended slot number.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.5ColumnportTyperead-onlycurrentType of expansion module in this port.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.6ColumnflowControlStatusread-writecurrentThe flow-control status of the port. Its functionality is exactly same as 'flow control' or 'no flow control' commands in console mode.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.7ColumnbandwidthControlStatusread-onlycurrentThe bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwid…
1.3.6.1.4.1.259.8.1.2.100.3.2.1.8ColumnmaxBandwidthread-onlycurrentThe max bandwidth of the port.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.9ColumnreceiveBandwidthread-writecurrentThe recevice bandwidth of the port. Its unit is kbs. The command 'bandwidth control 50 both' in console mode equals setting both receiveBandwidth and transmitB…
1.3.6.1.4.1.259.8.1.2.100.3.2.1.10ColumntransmitBandwidthread-writecurrentThe transmit bandwidth of the port. Its unit is kbs. Set 0 is no bandwidth.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.12Columnshutdownread-writecurrentClose or open to specify the port.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.13Columnloopbackread-writecurrentOpen or close to specify the wreath of the port back to test the function.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.14ColumnspeedDuplexread-writecurrentThe speed and duplex status of the port.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.15ColumnportModeread-writecurrentport mode: 1 is access,2 is trunk,3 is hybrid
1.3.6.1.4.1.259.8.1.2.100.3.2.1.16Columnpvidread-writecurrentport of native vlan No.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.17ColumnindicatesTyperead-onlycurrentIndicates the port type of the configuration of the switch.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.18ColumnvctActionread-writecurrentThis object indicates the VCT action of the port,only the value 1 is permitted when SET this entry though you can GET 1(processing) and 0(succeed); The specifi…
1.3.6.1.4.1.259.8.1.2.100.3.2.1.19ColumnvctLastStatusread-onlycurrentIndicates the last VCT status of the port.
1.3.6.1.4.1.259.8.1.2.100.3.2.1.20ColumnportTrunkAllowedvlanread-writecurrenttrunk port allowed vlan list string
1.3.6.1.4.1.259.8.1.2.100.3.2.1.21ColumnportHybridTaggedAllowedvlanread-writecurrenthybrid port tagged allowed vlan list string
1.3.6.1.4.1.259.8.1.2.100.3.2.1.22ColumnportHybridUntaggedAllowedvlanread-writecurrenthybrid port untagged allowed vlan list string
1.3.6.1.4.1.259.8.1.2.100.4NodepriIpConfig
1.3.6.1.4.1.259.8.1.2.100.4.1ScalarnetDefaultGatewayread-writecurrentThe IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
1.3.6.1.4.1.259.8.1.2.100.4.2ScalaripHttpStateread-writecurrentWeb server on-off.
1.3.6.1.4.1.259.8.1.2.100.4.3TableiPAddrTablenot-accessiblecurrentA table of iPAddrEntry.
1.3.6.1.4.1.259.8.1.2.100.4.3.1RowiPAddrEntrynot-accessiblecurrentA set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is …
1.3.6.1.4.1.259.8.1.2.100.4.3.1.1ColumniPAddrVidnot-accessiblecurrentThe VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.
1.3.6.1.4.1.259.8.1.2.100.4.3.1.2ColumniPAddrIPAddressnot-accessiblecurrentThe IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the…
1.3.6.1.4.1.259.8.1.2.100.4.3.1.3ColumniPAddrSubnetMaskread-createcurrentThe subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when t…
1.3.6.1.4.1.259.8.1.2.100.4.3.1.4ColumniPAddrPrimaryInterfaceread-createcurrentWhether this is a primary interface.
1.3.6.1.4.1.259.8.1.2.100.4.3.1.5ColumniPAddrStatusread-createcurrentNow state.
1.3.6.1.4.1.259.8.1.2.100.4.4TableinterfaceTablenot-accessiblecurrentA table of interfaceEntry.
1.3.6.1.4.1.259.8.1.2.100.4.4.1RowinterfaceEntrynot-accessiblecurrentA set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is …
1.3.6.1.4.1.259.8.1.2.100.4.4.1.1Columnintfacetypenot-accessiblecurrentThe Type of interface. Now support(1)vintf and (2)loopback.
1.3.6.1.4.1.259.8.1.2.100.4.4.1.2ColumnintfaceIDnot-accessiblecurrentThe Number of interface. exp:intfacetype(1),interfaceID(2) means interface vlan 2. if intfacetype(2) interfaceID(4) means interface loopback4. if intfacetype(3…
1.3.6.1.4.1.259.8.1.2.100.4.4.1.3ColumnintfaceIndexread-onlycurrentThe Index of interface.
1.3.6.1.4.1.259.8.1.2.100.4.4.1.5ColumnintfaceStatusread-createcurrentNow state.
1.3.6.1.4.1.259.8.1.2.100.5NodepriVlanConfig
1.3.6.1.4.1.259.8.1.2.100.5.1TablevlanInfoTablenot-accessiblecurrentA table containing current configuration information for each VLAN currently configured into the device by (local or network) management.
1.3.6.1.4.1.259.8.1.2.100.5.1.1RowvlanInfoEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.259.8.1.2.100.5.1.1.1ColumnvlanIDnot-accessiblecurrentThis value is vlan's ID.
1.3.6.1.4.1.259.8.1.2.100.5.1.1.2ColumnvlanNameread-createcurrentwhich may be used to identify the VLAN.
1.3.6.1.4.1.259.8.1.2.100.5.1.1.3ColumnvlanPortNumberread-onlycurrentThe sum of vlan's ports.
1.3.6.1.4.1.259.8.1.2.100.5.1.1.4ColumnvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.259.8.1.2.100.6NodepriJumblyStacking
1.3.6.1.4.1.259.8.1.2.100.6.1ScalarsysStackUnitNumberread-onlycurrentthe number of the stacked units.
1.3.6.1.4.1.259.8.1.2.100.6.2TablejumblyStackingInfoTablenot-accessiblecurrentTable of descriptive and status information about jumbly stacking in this system.
1.3.6.1.4.1.259.8.1.2.100.6.2.1RowjumblyStackingInfoEntrynot-accessiblecurrentAn entry in the table, containing information about stacking switch in this system.
1.3.6.1.4.1.259.8.1.2.100.6.2.1.1ColumnstackingUnitIndexread-onlycurrentThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
1.3.6.1.4.1.259.8.1.2.100.6.2.1.2ColumnswHardwareVersionread-onlycurrentThe text string denoting the version of the hardware.
1.3.6.1.4.1.259.8.1.2.100.6.2.1.3ColumnswSoftwareVersionread-onlycurrentThe text string denoting the version of the software.
1.3.6.1.4.1.259.8.1.2.100.6.2.1.4ColumnswCPUMacread-onlycurrentthe Mac address of the machine.
1.3.6.1.4.1.259.8.1.2.100.6.2.1.5ColumnswTyperead-onlycurrentType of this switch.
1.3.6.1.4.1.259.8.1.2.100.7NodepriUamSecurityPortMib
1.3.6.1.4.1.259.8.1.2.100.7.1TableportSecurityTablenot-accessiblecurrentThe table of port security
1.3.6.1.4.1.259.8.1.2.100.7.1.1RowportSecurityEntrynot-accessiblecurrentAn entry in the port security table.
1.3.6.1.4.1.259.8.1.2.100.7.1.1.1ColumnpsPortIndexnot-accessiblecurrentA unique value for each port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.2ColumnpsPortSecurityread-writecurrentenable or disable mac bind on this port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.3ColumnpsSecuritytSaticMacAddread-writecurrentbind Security mac address on this port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.4ColumnpsSecurityStaticMacDelread-writecurrentdelete Security mac address on this port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.5ColumnpsSecurityPortLockread-writecurrentlock or unlock this port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.6ColumnpsSecurityPortMaxread-writecurrentMaximum secure addrs on this port
1.3.6.1.4.1.259.8.1.2.100.7.1.1.7ColumnpsSecurityPortConvertmacread-writecurrentconvert dynamic mac to security mac
1.3.6.1.4.1.259.8.1.2.100.7.1.1.8ColumnpsSecurityPortLocktimerread-writecurrentlock timer on this port
1.3.6.1.4.1.259.8.1.2.100.7.2TablesecurityMacPortTablenot-accessiblecurrentTable of descriptive and status information about security port
1.3.6.1.4.1.259.8.1.2.100.7.2.1RowsecurityMacPortEntrynot-accessiblecurrentAn entry in the security mac port table.
1.3.6.1.4.1.259.8.1.2.100.7.2.1.1ColumnsecPortIndexread-onlycurrentA unique value for each port
1.3.6.1.4.1.259.8.1.2.100.7.2.1.2ColumnsecMacAdressread-onlycurrentMac adress bind on this port
1.3.6.1.4.1.259.8.1.2.100.7.2.1.3ColumnsecVidread-onlycurrentvlan id of this port(pvid)
1.3.6.1.4.1.259.8.1.2.100.8NodepriIgmpSnoopingMib
1.3.6.1.4.1.259.8.1.2.100.8.1ScalarpriIgmpSnoopingGlobalEnableread-writecurrentEnable or disable the IgmpSnooping algorithm in the switch.
1.3.6.1.4.1.259.8.1.2.100.8.2TablepriIgmpSnoopingVlanTablenot-accessiblecurrentIopgmpSnoing configuration in vlan.
1.3.6.1.4.1.259.8.1.2.100.8.2.1RowpriIgmpSnoopingEntrynot-accessiblecurrentIgmpSnooping confition in vlan.
1.3.6.1.4.1.259.8.1.2.100.8.2.1.1ColumnpriIgmpSnoopingvlanIDnot-accessiblecurrentThis value is vlan's ID.
1.3.6.1.4.1.259.8.1.2.100.8.2.1.2ColumnpriIgmpSnoopingvlanEnableread-writecurrentEnable or disable the IgmpSnooping in the switch.Default:0
1.3.6.1.4.1.259.8.1.2.100.8.2.1.3ColumnpriIgmpSnoopingleaveread-writecurrentEnable or disable the immediate leave config.Default:0
1.3.6.1.4.1.259.8.1.2.100.8.2.1.4ColumnpriIgmpSnoopingL2genread-writecurrentEnable or disable the l2-general-querier config.Default:0
1.3.6.1.4.1.259.8.1.2.100.8.2.1.5ColumnpriIgmpSnoopingGroupNumread-writecurrentset the maximum IGMP group the port can join
1.3.6.1.4.1.259.8.1.2.100.8.2.1.6ColumnpriIgmpSnoopingSourceNumread-writecurrentset the maximum source number
1.3.6.1.4.1.259.8.1.2.100.8.2.1.7ColumnpriIgmpSnoopingPortread-onlycurrentGet static mrouter port of vlan. ethernet: Name of Ethernet port ifname: Name of interface port-channel: Port aggregation.
1.3.6.1.4.1.259.8.1.2.100.8.2.1.8ColumnpriIgmpSnoopingPortTimeread-writecurrentConfigure this survive time of mrouter port.Default: 255s
1.3.6.1.4.1.259.8.1.2.100.8.2.1.9ColumnpriIgmpSnoopingQueryIntervalread-writecurrentConfigure this query interval. Default: 125s
1.3.6.1.4.1.259.8.1.2.100.8.2.1.10ColumnpriIgmpSnoopingQueryMrspread-writecurrentConfigure the maximum query response period. Default: 10s
1.3.6.1.4.1.259.8.1.2.100.8.2.1.11ColumnpriIgmpSnoopingQueryRobustnessread-writecurrentConfigure the query robustness.Default: 2
1.3.6.1.4.1.259.8.1.2.100.8.2.1.12ColumnpriIgmpSnoopingSuppressionread-writecurrentConfigure the suppression query time.Default: 255s
1.3.6.1.4.1.259.8.1.2.100.9NodepriQinQmib
1.3.6.1.4.1.259.8.1.2.100.9.1Tabledot1qTunnelTablenot-accessiblecurrentport of qinq tunnel function list
1.3.6.1.4.1.259.8.1.2.100.9.1.1Rowdot1qTunnelEntrynot-accessiblecurrentconfigure of dot1qTunnel
1.3.6.1.4.1.259.8.1.2.100.9.1.1.1ColumnqinqPortIndexnot-accessiblecurrentport index
1.3.6.1.4.1.259.8.1.2.100.9.1.1.2ColumntunnelPortEnableread-writecurrentEnable or disable the dot1q-tunnel in this port.
1.3.6.1.4.1.259.8.1.2.100.9.1.1.3ColumntunnelPortTyperead-writecurrentProtocol type of trunk port(TPID)(exp:8100/9100/9200).
1.3.6.1.4.1.259.8.1.2.100.9.2TablevlanTranslationTablenot-accessiblecurrentVLAN translation basic config.
1.3.6.1.4.1.259.8.1.2.100.9.2.1RowvlanTranslationEntrynot-accessiblecurrentVLAN translation
1.3.6.1.4.1.259.8.1.2.100.9.2.1.1ColumntranslatPortIndexnot-accessiblecurrentIndex of Port.
1.3.6.1.4.1.259.8.1.2.100.9.2.1.2ColumntranslationEnableread-writecurrentif the port can be done translation function
1.3.6.1.4.1.259.8.1.2.100.9.2.1.3ColumntranslationDropTyperead-writecurrentwhen VLAN-translation missed, drop packet mode
1.3.6.1.4.1.259.8.1.2.100.9.3TablevlanTranslationTypeTablenot-accessiblecurrentport VLAN-translation of translation relation list
1.3.6.1.4.1.259.8.1.2.100.9.3.1RowvlanTranslationTypeEntrynot-accessiblecurrentport VLAN translation of translation relation,index is port index and translation sort
1.3.6.1.4.1.259.8.1.2.100.9.3.1.1ColumntranslatPortTypeIndexread-onlycurrentport index
1.3.6.1.4.1.259.8.1.2.100.9.3.1.2ColumntranslationTyperead-onlycurrenttranslation type. in:input translation; out:output translation.
1.3.6.1.4.1.259.8.1.2.100.9.3.1.3ColumntranslationOldVlanidread-onlycurrentvlantranslation pre-vid
1.3.6.1.4.1.259.8.1.2.100.9.3.1.4ColumntranslationNewVlanidread-onlycurrentthe new vid
1.3.6.1.4.1.259.8.1.2.100.9.3.1.5ColumntranslationTypeStatusread-createcurrentaccession/delete VLAN-translation relation
1.3.6.1.4.1.259.8.1.2.100.10Nodeprisecurity
1.3.6.1.4.1.259.8.1.2.100.10.1Nodeacl
1.3.6.1.4.1.259.8.1.2.100.10.1.1NodefireWall
1.3.6.1.4.1.259.8.1.2.100.10.1.1.1ScalarfireWallEnableread-writecurrentfirewall on-off
1.3.6.1.4.1.259.8.1.2.100.10.1.2NodetimeRange
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1TabletimeRangeTablenot-accessiblecurrenttimeRange Table
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1RowtimeRangeEntrynot-accessiblecurrenttimeRange Entry
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.1ColumntimeRangeNamenot-accessiblecurrentTimeRange name
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.2ColumntimeRangeTyperead-createcurrentTimeRange type
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.3ColumntimeRangeStWeekread-createcurrentconfigurate the start week
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.4ColumntimeRangeStTimeread-createcurrentconfigurate the start clock
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.5ColumntimeRangeStDateread-createcurrentconfigurate the start Date
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.6ColumntimeRangeEndWeekread-createcurrentconfigurate the end week
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.7ColumntimeRangeEndTimeread-createcurrentconfigurate the end clock
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.8ColumntimeRangeEndDateread-createcurrentconfigurate the end date
1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.9ColumntimeRangeStatusread-createcurrentTimeRange configurate status machine
1.3.6.1.4.1.259.8.1.2.100.10.1.2.2TabletimeRangeShowTablenot-accessiblecurrentTimeRange show Table
1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1RowtimeRangeShowEntrynot-accessiblecurrentTimeRange show Entry
1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.1ColumntimeRangeShowNamenot-accessiblecurrentTimeRange name
1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.2ColumntimeRangeElemNumnot-accessiblecurrentTimeRange group index
1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.3ColumntimeRangeShowread-onlycurrentTimeRange configure status
1.3.6.1.4.1.259.8.1.2.100.10.1.3NodenumAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2NodenumIpStandardAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.1ScalarnumIpStandardNumread-createcurrentThe name of number-ip-standard-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.2ScalarnumIpStandardActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.3ScalarnumIpStandardSrcIpTyperead-createcurrentThe type of Source Ip address used by this ACE.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.4ScalarnumIpStandardSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.5ScalarnumIpStandardSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.2.6ScalarnumIpStandardStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3NodenumMacStandardAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.1ScalarnumMacStandardNumread-createcurrentThe name of number-ip-standard-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.2ScalarnumMacStandardActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.3ScalarnumMacStandardSrcMacTyperead-createcurrentThe type of Source Mac address used by this ACE.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.4ScalarnumMacStandardSrcMacread-createcurrentSource Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.5ScalarnumMacStandardSrcMacWildread-createcurrentSource Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.3.6ScalarnumMacStandardStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4NodenumIpExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.1ScalarnumIpExternNumread-createcurrentThe name of number-ip-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.3ScalarnumIpExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.4ScalarnumIpExternSrcIpTyperead-createcurrentThe type of Source IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.5ScalarnumIpExternSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.6ScalarnumIpExternSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.7ScalarnumIpExternDestIpTyperead-createcurrentThe type of Destination IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.8ScalarnumIpExternDestIpread-createcurrentDestination IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.9ScalarnumIpExternDestIpWildread-createcurrentDestination IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.10ScalarnumIpExternPreread-createcurrentSpecifies the IP precedence value to be matched against. This object could not be configured when the status of the entry, caqIpAceStatus, is active(1). The va…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.11ScalarnumIpExternTosread-createcurrentThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.12ScalarnumIpExternTimeRangeread-createcurrentThe Time-range of advanced acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.13ScalarnumIpExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.14ScalarnumIpExternSrcOPread-createcurrentIndicates how a packet's source TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, this obj…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.15ScalarnumIpExternSrcPortread-createcurrentThe source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the starting port number of …
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.16ScalarnumIpExternSrcPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the ending port number of th…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.17ScalarnumIpExternDestOPread-createcurrentIndicates how a packet's Destination TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, thi…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.18ScalarnumIpExternDestPortread-createcurrentThe source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the starting port number of…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.19ScalarnumIpExternDestPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the ending port number of t…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.20ScalarnumIpExternIcmpTyperead-createcurrentIndicates the message type of ICMP packets. The type is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.21ScalarnumIpExternIcmpCoderead-createcurrentIndicates the message code of ICMP packets. The code is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.22ScalarnumIpExternIgmpTyperead-createcurrentIndicates the message type of IGMP packets. The code is a number from 0 to 15.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.23ScalarnumIpExternTcpTyperead-createcurrentTcp type.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.4.24ScalarnumIpExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5NodenumMacExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.1ScalarnumMacExternNumread-createcurrentThe name of number-Mac-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.3ScalarnumMacExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.4ScalarnumMacExternSrcMacTyperead-createcurrentThe type of Source Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.5ScalarnumMacExternSrcMacread-createcurrentSource Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.6ScalarnumMacExternSrcMacWildread-createcurrentSource Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.7ScalarnumMacExternDestMacTyperead-createcurrentThe type of Destination Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.8ScalarnumMacExternDestMacread-createcurrentDestination Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.9ScalarnumMacExternDestMacWildread-createcurrentDestination Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.10ScalarnumMacExternPacketTyperead-createcurrentIndicates the message type of packets.none(0),untagged-eth2(1), untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)
1.3.6.1.4.1.259.8.1.2.100.10.1.3.5.11ScalarnumMacExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6NodenumMacIpExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.1ScalarnumMacIpExternNumread-createcurrentThe name of number-ip-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.3ScalarnumMacIpExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.4ScalarnumMacIpExternSrcMacTyperead-createcurrentThe type of Source Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.5ScalarnumMacIpExternSrcMacread-createcurrentSource Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.6ScalarnumMacIpExternSrcMacWildread-createcurrentSource Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.7ScalarnumMacIpExternDestMacTyperead-createcurrentThe type of Destination Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.8ScalarnumMacIpExternDestMacread-createcurrentDestination Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.9ScalarnumMacIpExternDestMacWildread-createcurrentDestination Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.10ScalarnumMacIpExternSrcIpTyperead-createcurrentThe type of Source IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.11ScalarnumMacIpExternSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.12ScalarnumMacIpExternSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.13ScalarnumMacIpExternDestIpTyperead-createcurrentThe type of Destination IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.14ScalarnumMacIpExternDestIpread-createcurrentDestination IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.15ScalarnumMacIpExternDestIpWildread-createcurrentDestination IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.16ScalarnumMacIpExternPreread-createcurrentSpecifies the IP precedence value to be matched against. This object could not be configured when the status of the entry, caqIpAceStatus, is active(1)
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.17ScalarnumMacIpExternTosread-createcurrentThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.18ScalarnumMacIpExternTimeRangeread-createcurrentThe Time-range of advanced acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.19ScalarnumMacIpExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.20ScalarnumMacIpExternSrcOPread-createcurrentIndicates how a packet's source TCP/UDP port number is to be compared. If the numMacIpExternProtocol object in the same row does not indicate TCP or UDP, this …
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.21ScalarnumMacIpExternSrcPortread-createcurrentThe source port number of the TCP or UDP protocol. If the numMacIpExternSrcOP object in the same row is range(5), this object will be the starting port number …
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.22ScalarnumMacIpExternSrcPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the numMacIpExternSrcOP object in the same row is range(5), this object will be the ending port number of…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.23ScalarnumMacIpExternDestOPread-createcurrentIndicates how a packet's Destination TCP/UDP port number is to be compared. If the numMacIpExternProtocol object in the same row does not indicate TCP or UDP, …
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.24ScalarnumMacIpExternDestPortread-createcurrentThe source port number of the TCP or UDP protocol. If the numMacIpExternDestOP object in the same row is range(5), this object will be the starting port number…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.25ScalarnumMacIpExternDestPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the numMacIpExternDestOP object in the same row is range(5), this object will be the ending port number o…
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.26ScalarnumMacIpExternIcmpTyperead-createcurrentIndicates the message type of ICMP packets. The type is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.27ScalarnumMacIpExternIcmpCoderead-createcurrentIndicates the message code of ICMP packets. The code is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.28ScalarnumMacIpExternIgmpTyperead-createcurrentIndicates the message type of IGMP packets. The code is a number from 0 to 15.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.29ScalarnumMacIpExternTcpTyperead-createcurrentTcp type.
1.3.6.1.4.1.259.8.1.2.100.10.1.3.6.30ScalarnumMacIpExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.4NodenameAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2NodenameIpStandardAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.1ScalarnameIpStandardNameread-createcurrentThe name of name-ip-standard-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.2ScalarnameIpStandardActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.3ScalarnameIpStandardSrcIpTyperead-createcurrentThe type of Source IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.4ScalarnameIpStandardSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.5ScalarnameIpStandardSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.2.6ScalarnameIpStandardStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3NodenameIpExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.1ScalarnameIpExternNameread-createcurrentThe name of name-ip-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.3ScalarnameIpExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.4ScalarnameIpExternSrcIpTyperead-createcurrentThe type of Source IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.5ScalarnameIpExternSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.6ScalarnameIpExternSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.7ScalarnameIpExternDestIpTyperead-createcurrentThe type of Destination IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.8ScalarnameIpExternDestIpread-createcurrentDestination IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.9ScalarnameIpExternDestIpWildread-createcurrentDestination IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.10ScalarnameIpExternPreread-createcurrentSpecifies the IP precedence value to be matched against. This object could not be configured when the status of the entry, caqIpAceStatus, is active(1). The va…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.11ScalarnameIpExternTosread-createcurrentThe value of IP-packet's TOS. Value of TOS(type of service) max-reliability match packets with max reliable TOS(2), max-throughput match packets with max throu…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.12ScalarnameIpExternTimeRangeread-createcurrentThe Time-range of advanced acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.13ScalarnameIpExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.14ScalarnameIpExternSrcOPread-createcurrentIndicates how a packet's source TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, this obj…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.15ScalarnameIpExternSrcPortread-createcurrentThe source port number of the TCP or UDP protocol. If the nameIpExternSrcOP object in the same row is range(5), this object will be the starting port number of…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.16ScalarnameIpExternSrcPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the nameIpExternSrcOP object in the same row is range(5), this object will be the ending port number of t…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.17ScalarnameIpExternDestOPread-createcurrentIndicates how a packet's Destination TCP/UDP port number is to be compared. If the nameIpExternProtocol object in the same row does not indicate TCP or UDP, th…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.18ScalarnameIpExternDestPortread-createcurrentThe source port number of the TCP or UDP protocol. If the nameIpExternDestOP object in the same row is range(5), this object will be the starting port number o…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.19ScalarnameIpExternDestPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the nameIpExternDestOP object in the same row is range(5), this object will be the ending port number of …
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.20ScalarnameIpExternIcmpTyperead-createcurrentIndicates the message type of ICMP packets. The type is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.21ScalarnameIpExternIcmpCoderead-createcurrentIndicates the message code of ICMP packets. The code is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.22ScalarnameIpExternIgmpTyperead-createcurrentIndicates the message type of IGMP packets. The code is a number from 0 to 15.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.23ScalarnameIpExternTcpTyperead-createcurrentTcp type.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.3.24ScalarnameIpExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4NodenameMacExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.1ScalarnameMacExternNameread-createcurrentThe name of name-Mac-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.3ScalarnameMacExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.4ScalarnameMacExternSrcMacTyperead-createcurrentThe type of Source Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.5ScalarnameMacExternSrcMacread-createcurrentSource Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.6ScalarnameMacExternSrcMacWildread-createcurrentSource Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.7ScalarnameMacExternDestMacTyperead-createcurrentThe type of Destination Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.8ScalarnameMacExternDestMacread-createcurrentDestination Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.9ScalarnameMacExternDestMacWildread-createcurrentDestination Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.10ScalarnameMacExternPacketTyperead-createcurrentIndicates the message type of packets.none(0),untagged-eth2(1), untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)
1.3.6.1.4.1.259.8.1.2.100.10.1.4.4.11ScalarnameMacExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5NodenameMacIpExternAcl
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.1ScalarnameMacIpExternNameread-createcurrentThe name of name-ip-Extern-acl group Interface.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.3ScalarnameMacIpExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.4ScalarnameMacIpExternSrcMacTyperead-createcurrentThe type of Source Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.5ScalarnameMacIpExternSrcMacread-createcurrentSource Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.6ScalarnameMacIpExternSrcMacWildread-createcurrentSource Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.7ScalarnameMacIpExternDestMacTyperead-createcurrentThe type of Destination Mac address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.8ScalarnameMacIpExternDestMacread-createcurrentDestination Mac-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.9ScalarnameMacIpExternDestMacWildread-createcurrentDestination Mac-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.10ScalarnameMacIpExternSrcIpTyperead-createcurrentThe type of Source IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.11ScalarnameMacIpExternSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.12ScalarnameMacIpExternSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.13ScalarnameMacIpExternDestIpTyperead-createcurrentThe type of Destination IP address used by this ACE entry.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.14ScalarnameMacIpExternDestIpread-createcurrentDestination IP-address of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.15ScalarnameMacIpExternDestIpWildread-createcurrentDestination IP-address wild of basic acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.16ScalarnameMacIpExternPreread-createcurrentSpecifies the IP precedence value to be matched against. This object could not be configured when the status of the entry, caqIpAceStatus, is active(1)
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.17ScalarnameMacIpExternTosread-createcurrentThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.18ScalarnameMacIpExternTimeRangeread-createcurrentThe Time-range of advanced acl rule.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.19ScalarnameMacIpExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.20ScalarnameMacIpExternSrcOPread-createcurrentIndicates how a packet's source TCP/UDP port number is to be compared. If the nameMacIpExternProtocol object in the same row does not indicate TCP or UDP, this…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.21ScalarnameMacIpExternSrcPortread-createcurrentThe source port number of the TCP or UDP protocol. If the nameMacIpExternSrcOP object in the same row is range(5), this object will be the starting port number…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.22ScalarnameMacIpExternSrcPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the nameMacIpExternSrcOP object in the same row is range(5), this object will be the ending port number o…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.23ScalarnameMacIpExternDestOPread-createcurrentIndicates how a packet's Destination TCP/UDP port number is to be compared. If the nameMacIpExternProtocol object in the same row does not indicate TCP or UDP,…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.24ScalarnameMacIpExternDestPortread-createcurrentThe source port number of the TCP or UDP protocol. If the nameMacIpExternDestOP object in the same row is range(5), this object will be the starting port numbe…
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.25ScalarnameMacIpExternDestPortRangeread-createcurrentThe source port number of the TCP or UDP protocol. If the nameMacIpExternDestOP object in the same row is range(5), this object will be the ending port number …
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.26ScalarnameMacIpExternIcmpTyperead-createcurrentIndicates the message type of ICMP packets. The type is a nameber from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.27ScalarnameMacIpExternIcmpCoderead-createcurrentIndicates the message code of ICMP packets. The code is a number from 0 to 255.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.28ScalarnameMacIpExternIgmpTyperead-createcurrentIndicates the message type of IGMP packets. The code is a number from 0 to 15.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.29ScalarnameMacIpExternTcpTyperead-createcurrentTcp type.
1.3.6.1.4.1.259.8.1.2.100.10.1.4.5.30ScalarnameMacIpExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.259.8.1.2.100.10.1.5TableshowAclTablenot-accessiblecurrentACL show list
1.3.6.1.4.1.259.8.1.2.100.10.1.5.1RowshowAclEntrynot-accessiblecurrentACL show
1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.1ColumnaclNamenot-accessiblecurrentACL group name
1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.2ColumnaclRuleNumnot-accessiblecurrentthe index of rule in the special access group
1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.3ColumnaclConfigread-onlycurrentACL configure status
1.3.6.1.4.1.259.8.1.2.100.10.2NodesshMgt
1.3.6.1.4.1.259.8.1.2.100.10.2.1ScalarsshServerStatusread-writecurrentThe status of Secure Shell Server, set this value to 1 to enable SSH server, set this value to 0 to disable the SSH server.
1.3.6.1.4.1.259.8.1.2.100.10.2.2ScalarsshServerVersionread-onlycurrentThe version of the SSH Server.
1.3.6.1.4.1.259.8.1.2.100.10.2.3ScalarsshTimeoutread-writecurrentThe time interval that the router waits for the SSH client to respond. The range is 10-600.
1.3.6.1.4.1.259.8.1.2.100.10.2.4ScalarsshAuthRetriesread-writecurrentThe number of attempts after which the interface is reset. The range is 1-10.
1.3.6.1.4.1.259.8.1.2.100.10.2.5TablesshUseTablenot-accessiblecurrentThe table for Secure Shell Connection.
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1RowsshUseEntrynot-accessiblecurrentThe conceptual row for sshConnInfoTable.
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.1ColumnsshUserIndexnot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.2ColumnsshUserNameread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.3ColumnsshUserTyperead-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.4ColumnsshUserPasswordread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.5ColumnsshUserStatusread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.2.6TablesshConnInfoTablenot-accessiblecurrentThe table for Secure Shell Connection.
1.3.6.1.4.1.259.8.1.2.100.10.2.6.1RowsshConnInfoEntrynot-accessiblecurrentThe conceptual row for sshConnInfoTable.
1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.1ColumnsshConnIDread-onlycurrentThe connection ID of the Secure Shell Connection.
1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.2ColumnsshConnVersionread-onlycurrentThe SSH version.
1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.3ColumnsshConnStatusread-onlycurrentThe SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start st…
1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.4ColumnsshConnUserNameread-onlycurrentUser Name.
1.3.6.1.4.1.259.8.1.2.100.10.3NodetacacsMgt
1.3.6.1.4.1.259.8.1.2.100.10.3.1TabletacacsServerHostTablenot-accessiblecurrentIP address of TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1RowtacacsServerHostEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.1ColumntacacsServerHostIndexnot-accessiblecurrentIP address of TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.2ColumntacacsServerHostIPread-writecurrentIP address of TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.3ColumntacacsServerHostPortread-writecurrentPort of TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.4ColumntacacsServerHostPrimaryread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.5ColumntacacsServerHostStatusread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.6ColumntacacsServerHostKeyread-writecurrentKey for TACACS.
1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.7ColumntacacsServerHostTimeoutread-writecurrentThe time before retransmit of the TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.2ScalartacacsServerTimeoutread-writecurrentThe time before retransmit of the TACACS server.
1.3.6.1.4.1.259.8.1.2.100.10.3.3ScalartacacsServerKeyread-writecurrentKey for TACACS.
1.3.6.1.4.1.259.8.1.2.100.10.4Nodeam
1.3.6.1.4.1.259.8.1.2.100.10.4.1ScalaramGlobalEnableread-writecurrentGlobal Enable or disable the Access Management.
1.3.6.1.4.1.259.8.1.2.100.10.4.2TableamPortInfoTablenot-accessiblecurrentAccess Management information list of port.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1RowamPortInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.1ColumnamPortIndexnot-accessiblecurrentport index
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.2ColumnamPortEnableread-writecurrentEnable or disable the Access Management on the port.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.3ColumnamPortForwardingTyperead-writecurrentAccess Management forwarding type.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.4ColumnamPortIpread-onlycurrentIP address of Access Management.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.5ColumnamPortMacread-writecurrentMac address of Access Management.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.6ColumnamPortCountread-writecurrentSeriate IP address number.
1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.7ColumnamPortStatusread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.10.5NoderadiusMgt
1.3.6.1.4.1.259.8.1.2.100.10.5.1ScalaraaaEnabledread-writecurrentEnable or disable Aaa function.
1.3.6.1.4.1.259.8.1.2.100.10.5.2ScalaraaaAccountread-writecurrentEnable or disable Aaa Accounting function.
1.3.6.1.4.1.259.8.1.2.100.10.5.3ScalaraaaAccountUpdateread-writecurrentEnable or disable Aaa Accounting update function.
1.3.6.1.4.1.259.8.1.2.100.10.5.4ScalaraaaAccountBindingDHCPread-writecurrentEnable or disable Aaa Accounting DHCP-Binding function.
1.3.6.1.4.1.259.8.1.2.100.10.5.5TableradiusAuthenServerHostTablenot-accessiblecurrentConfiguration items and information list of RADIUS authentication server host.
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1RowradiusAuthenServerHostEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.1ColumnradiusAuthenServerHostIndexnot-accessiblecurrentIndex of RADIUS authentication server.
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.2ColumnradiusAuthenServerHostIPread-writecurrentIP address of RADIUS authentication server.
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.3ColumnradiusAuthenServerHostPortread-writecurrentPort of RADIUS authentication server.
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.4ColumnradiusAuthenServerHostPrimaryread-writecurrentConfiguration of primary or not primary
1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.5ColumnradiusAuthenServerHostStatusread-writecurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.10.5.6TableradiusAcctServerHostTablenot-accessiblecurrentConfiguration items and information list of RADIUS accounting server host.
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1RowradiusAcctServerHostEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.1ColumnradiusAcctServerHostIndexnot-accessiblecurrentIndex of RADIUS accounting server.
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.2ColumnradiusAcctServerHostIPread-writecurrentIP address of RADIUS accounting server.
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.3ColumnradiusAcctServerHostPortread-writecurrentPort of RADIUS accounting server.
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.4ColumnradiusAcctServerHostPrimaryread-writecurrentConfiguration of primary or not primary
1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.5ColumnradiusAcctServerHostStatusread-writecurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.10.5.7ScalarradiusServerTimeoutread-writecurrentThe time before retransmit of the RADIUS server.
1.3.6.1.4.1.259.8.1.2.100.10.5.8ScalarradiusServerRetransmitread-writecurrentRetransmit time before giving up the current RADIUS server.
1.3.6.1.4.1.259.8.1.2.100.10.5.9ScalarradiusServerDeadTimeread-writecurrentThe time before retry of the down-server.
1.3.6.1.4.1.259.8.1.2.100.10.5.10ScalarradiusServerKeyread-writecurrentKey for RADIUS.
1.3.6.1.4.1.259.8.1.2.100.10.5.11ScalarradiusServerAccountTimeOutread-writecurrentAccounting update interval.
1.3.6.1.4.1.259.8.1.2.100.11NodepriQos
1.3.6.1.4.1.259.8.1.2.100.11.1Nodeqos
1.3.6.1.4.1.259.8.1.2.100.11.1.1ScalarqosEnableread-writecurrentqos golbal switch.disable express close,enable is open.
1.3.6.1.4.1.259.8.1.2.100.11.1.2TableqosPortTablenot-accessiblecurrentqos port configration.
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1RowqosPortEntrynot-accessiblecurrentqos port list of concrete definition.index is port index
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.1ColumnqosPortIndexnot-accessiblecurrentport Index
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.2ColumnqosPortTyperead-createcurrentthe relation between qosPortType and CLI: 1 mls qos cos {<default-cos> }; 0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] […
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.3ColumnqosPortCosread-createcurrentport default cos value
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.4ColumnqosPortTrustread-createcurrentConfigure port trust. priority(0),mls qos trust port priority <cos>; priAndPassThroughDscp(1),opposite cli is mls qos trust port priority <cos> pass-through-ds…
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.5ColumnqosPortPriorityread-createcurrentThe corresponding CLI:mls qos trust port priority <cos>.
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.6ColumnqosPortMutationread-createcurrentconfigure port of dscp-mutation,opposite cli 'mls qos dscp-mutation <dscp-mutation-name>'
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.7ColumnqosPortQueueread-createcurrentpriorityQueue configure queue out method to strict priority-queue method; wrrQueue restores the default wrr queue out method.
1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.8ColumnqosPortStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.3TableqosClassMapTablenot-accessiblecurrentclassmap configure list
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1RowqosclassmapEntrynot-accessiblecurrentabout classmap list of concrete definition,index is classmapname.
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.1ColumnqosClassMapNamenot-accessiblecurrentclassmap name
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.2ColumnqosClassMapTyperead-createcurrent0 class-map <class-map-name>,index is classmapname; 1 match access-group <acl-index-or-name>,need qosClassMapAccessGroup cooperation; 2 match ip dscp <dscp-lis…
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.3ColumnqosClassMapAccessGroupread-createcurrentMatch specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.4ColumnqosClassMapDscpread-createcurrentMatch specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.5ColumnqosClassMapV6Dscpread-createcurrentMatch specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.6ColumnqosClassMapIpPreread-createcurrentMatch specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.7ColumnqosClassMapV6AccGroupread-createcurrentMatch specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.8ColumnqosClassMapV6Flowread-createcurrentMatch specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.9ColumnqosClassMapVlanread-createcurrentMatch specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.10ColumnqosClassCosread-createcurrentMatch specify Cos . This object be configured only if qosClassMapType in the same row is cos(9).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.11ColumnqosClassMapEXPtopmostread-createcurrentMatch specify MPLS EXP. This object be configured only if qosClassMapType in the same row is EXPtopmost(10).
1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.12ColumnqosClassMapStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.4TableqosPolicyTablenot-accessiblecurrentqos policy list
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1RowqosPolicyEntrynot-accessiblecurrentqos policy list of definition,index is qos policy and classmap of name
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.1ColumnqosPolicyNamenot-accessiblecurrentQoS Policy name
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.2ColumnqosPolicyClassMapread-createcurrentSpecify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting …
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.3ColumnqosPolicyTyperead-createcurrentthe relation between qosPolicyType and CLI: 0 policy-map <policy-map-name>; 1 class <class-map-name>; 2 police <rate-kbps> <burst-kbyte> [exceed-action {drop |…
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.4ColumnqosPolicyRateKbpsread-createcurrentRate Bandwidth of one policymap. This object be configured only if qosPolicyType in the same row is sp(2).
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.5ColumnqosPolicyNormalBurstKbpsread-createcurrentNormal burst kbytes.
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.6ColumnqosPolicyMaximumBurstKbpsread-createcurrentMaximum burst kbytes.
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.7ColumnqosPolicyPeakKbpsread-createcurrentPeak information rate.
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.8ColumnqosPolicyConformActionread-createcurrentconform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed…
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.9ColumnqosPolicyConformActionChangeValueread-createcurrentIf conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.10ColumnqosPolicyExceedActionread-createcurrentexceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is ex…
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.11ColumnqosPolicyViolateActionread-createcurrentviolate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is v…
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.12ColumnqosPolicyAggregatePolicerread-createcurrentaggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3).
1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.13ColumnqosPolicyStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.5TableqosAggPolicerTablenot-accessiblecurrentqos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content, please refer to qosshow…
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1RowqosAggPolicerEntrynot-accessiblecurrentindex is AggPolicer name.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.1ColumnqosAggPolicerNamenot-accessiblecurrentQoS qosAggPolicer name
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.2ColumnqosAggPolicerRateKbpsread-createcurrentRate Bandwidth of After the classification.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.3ColumnqosAggPolicerNormalBurstKbpsread-createcurrentNormal burst kbytes.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.4ColumnqosAggPolicerMaximumBurstKbpsread-createcurrentMaximum burst kbytes.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.5ColumnqosAggPolicerPeakKbpsread-createcurrentPeak information rate.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.6ColumnqosAggPolicerConformActionread-createcurrentconform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed…
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.7ColumnqosAggPolicerConformActionChangeValueread-createcurrentIf conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.8ColumnqosAggPolicerExceedActionread-createcurrentexceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is ex…
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.9ColumnqosAggPolicerViolateActionread-createcurrentviolate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is v…
1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.10ColumnqosAggPolicerStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.6TableqosSetTablenot-accessiblecurrentremark new dscp or ip precedence for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1RowqosSetEntrynot-accessiblecurrentqosSetTable list of acce index policyname and classmap name.
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.1ColumnqosSetPolicyMapNamenot-accessiblecurrentQoS Policy name
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.2ColumnqosSetClassMapNameread-createcurrentQoS class map name
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.3ColumnqosSetTyperead-createcurrentqosSetType range:1,2,3,4,5,6,7,8,9 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 nexthop Set IP nexthop; 4 dscp Set IPv6 DSCP (Di…
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.4ColumnqosSetdscpread-createcurrentremark dscp for the classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.5ColumnqosSetprecedenceread-createcurrentremark ip precedence for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.6ColumnqosSetnextHopread-createcurrentset nexthop for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.7ColumnqosSetv6Dscpread-createcurrentremark ipv6 dscp for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.8ColumnqosSetv6FlowLabelread-createcurrentremark ipv6 flow lable for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.9ColumnqosSetv6nextHopread-createcurrentset IPv6 nexthop for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.10ColumnqosSetCosread-createcurrentremark cos for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.11ColumnqosSetEXPimpositionread-createcurrentremark MPLS EXP value for classified flow
1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.12ColumnqosSetStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.7TableqosPortBindTablenot-accessiblecurrentApply a policy map to the specified port.
1.3.6.1.4.1.259.8.1.2.100.11.1.7.1RowqosPortBindEntrynot-accessiblecurrentthe index of this entry is port-index and policy-map
1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.1ColumnqosPortBindIndexnot-accessiblecurrentQoS Port Index
1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.2ColumnqosPortBindPolicynot-accessiblecurrentQoS Policy name
1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.3ColumnqosPortBindTyperead-createcurrentinput(1),bind the policy-map to ingress port; output(2),bind the policy-map to egress port; noinput(3),unbind the policy-map to ingress port; nooutput(4), unbi…
1.3.6.1.4.1.259.8.1.2.100.11.1.8TableqosPortQueueTablenot-accessiblecurrentset golbal qos WRR weight
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1RowqosPortQueueEntrynot-accessiblecurrentset port qos WRR weight,index is port index.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.1ColumnqosPortQueueIndexnot-accessiblecurrentQoS Port Index
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.2ColumnqosPortQueueWeight1read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.3ColumnqosPortQueueWeight2read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.4ColumnqosPortQueueWeight3read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.5ColumnqosPortQueueWeight4read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.6ColumnqosPortQueueWeight5read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.7ColumnqosPortQueueWeight6read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.8ColumnqosPortQueueWeight7read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.9ColumnqosPortQueueWeight8read-createcurrentWRR weight,range is 0~15.
1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.10ColumnqosPortQueueStatusread-createcurrentSetting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.9TableqosPortCosMapTablenot-accessiblecurrentCOS-Queue map
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1RowqosPortCosMapEntrynot-accessiblecurrentCOS-Queue map,index is cos-Queue map ID.
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.1ColumnqosPortCosMapQueueIdnot-accessiblecurrentqueue ID
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.2ColumnqosPortCosMapCos1read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.3ColumnqosPortCosMapCos2read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.4ColumnqosPortCosMapCos3read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.5ColumnqosPortCosMapCos4read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.6ColumnqosPortCosMapCos5read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.7ColumnqosPortCosMapCos6read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.8ColumnqosPortCosMapCos7read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.9ColumnqosPortCosMapCos8read-createcurrentCOS range is 0~7
1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.10ColumnqosPortCosMapStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.10NodeqosMap
1.3.6.1.4.1.259.8.1.2.100.11.1.10.1ScalarqosMapTyperead-createcurrentqosMapType range is 1~5.1 mls qos map cos-dscp <dscp1...dscp8>; 2 mls qos map dscp-cos <dscp-list> to <cos>; 3 mls qos map dscp-mutation <dscp-mutation-name> <…
1.3.6.1.4.1.259.8.1.2.100.11.1.10.2ScalarqosMapDscp1read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.3ScalarqosMapDscp2read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.4ScalarqosMapDscp3read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.5ScalarqosMapDscp4read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.6ScalarqosMapDscp5read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.7ScalarqosMapDscp6read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.8ScalarqosMapDscp7read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.9ScalarqosMapDscp8read-createcurrentDSCP-CoS map,DSCP range is 0~63
1.3.6.1.4.1.259.8.1.2.100.11.1.10.10ScalarqosMapCosread-createcurrentthe cos which DSCP map to
1.3.6.1.4.1.259.8.1.2.100.11.1.10.11ScalarqosMapEXPread-createcurrentthe EXP value which DSCP map to
1.3.6.1.4.1.259.8.1.2.100.11.1.10.12ScalarqosMapMarkDownDscpread-createcurrentthe dscp after mark down
1.3.6.1.4.1.259.8.1.2.100.11.1.10.13ScalarqosMapMarkDownTyperead-createcurrentnormal-burst:markdown map used by the exceed-action;max-burst:markdown map used by the violate-action.
1.3.6.1.4.1.259.8.1.2.100.11.1.10.14ScalarqosMapMutationNameread-createcurrentmap name
1.3.6.1.4.1.259.8.1.2.100.11.1.10.15ScalarqosMapMutationOutread-createcurrentegress DSCP,only one,eight ingress DSCP value map to one egress value
1.3.6.1.4.1.259.8.1.2.100.11.1.10.16ScalarqosMapStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.11.1.11Nodeshowqos
1.3.6.1.4.1.259.8.1.2.100.11.1.11.1TableshowclassmapTablenot-accessiblecurrentshow class map table
1.3.6.1.4.1.259.8.1.2.100.11.1.11.1.1RowshowclassmapEntrynot-accessiblecurrentshow class map entry
1.3.6.1.4.1.259.8.1.2.100.11.1.11.1.1.1Columnshowclassmapnamenot-accessiblecurrentclassmap name
1.3.6.1.4.1.259.8.1.2.100.11.1.11.1.1.2Columnshowclassmapmatchread-onlycurrentone item classmap match rule
1.3.6.1.4.1.259.8.1.2.100.11.1.11.2TableshowpolicymapTablenot-accessiblecurrentshow policy list
1.3.6.1.4.1.259.8.1.2.100.11.1.11.2.1RowshowpolicymapEntrynot-accessiblecurrentpolicy map entry
1.3.6.1.4.1.259.8.1.2.100.11.1.11.2.1.1Columnshowpolicymapnamenot-accessiblecurrentpolicy name
1.3.6.1.4.1.259.8.1.2.100.11.1.11.2.1.2Columnshowpolicymapcontentread-onlycurrentthe match classmap and all defined other rules
1.3.6.1.4.1.259.8.1.2.100.11.1.11.3TableshowqosaggregatepolicerTablenot-accessiblecurrentdisplay aggregatepolicer list
1.3.6.1.4.1.259.8.1.2.100.11.1.11.3.1RowshowqosaggregatepolicerEntrynot-accessiblecurrentaggregatepolicer entry,index is showqosaggregatepolicername
1.3.6.1.4.1.259.8.1.2.100.11.1.11.3.1.1Columnshowqosaggregatepolicernamenot-accessiblecurrentaggregatepolicer name
1.3.6.1.4.1.259.8.1.2.100.11.1.11.3.1.2Columnshowqosaggregatepolicercontentread-onlycurrentaggregatepolicer parameter
1.3.6.1.4.1.259.8.1.2.100.11.1.11.4TableshowmlsqosinterfaceTablenot-accessiblecurrentshow port qos configuration
1.3.6.1.4.1.259.8.1.2.100.11.1.11.4.1RowshowmlsqosinterfaceEntrynot-accessiblecurrentshowmlsqosinterfaceTable,index is port-index
1.3.6.1.4.1.259.8.1.2.100.11.1.11.4.1.1ColumnshowmlsqosinterfaceIndexnot-accessiblecurrentport index
1.3.6.1.4.1.259.8.1.2.100.11.1.11.4.1.2Columnshowmlsqosinterfaceqoscontentread-onlycurrentqos port configuration
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5Nodeshowmlsqosmaps
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.1Scalarshowmlsqosmapscosdscpread-onlycurrentcos-dscp map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.2Scalarshowmlsqosmapscosqueueread-onlycurrentCOS-wrr-queue map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.3Scalarshowmlsqosmapsdscpcosread-onlycurrentDSCP-COS map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.4Scalarshowmlsqosmapsipprecdscpread-onlycurrentIP precedence to DSCP map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.5Scalarshowmlsqosmapspoliceddscpread-onlycurrentDSCP mark down map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.6Scalarshowmlsqosmapspoliceddscpnormalburstread-onlycurrentNormal Burst Policed-dscp map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.7Scalarshowmlsqosmapsexpdscpread-onlycurrentEXP to DSCP map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.5.8Scalarshowmlsqosmapsdscpexpread-onlycurrentDSCP to EXP map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.6TableshowmlsqosmapsdscpmutationTablenot-accessiblecurrentingress DSCP to egress DSCP map
1.3.6.1.4.1.259.8.1.2.100.11.1.11.6.1RowshowmlsqosmapsdscpmutationEntrynot-accessiblecurrentindex is dscpmutationname
1.3.6.1.4.1.259.8.1.2.100.11.1.11.6.1.1Columnshowmlsqosmapsdscpmutationnamenot-accessiblecurrentdscpmutationname.
1.3.6.1.4.1.259.8.1.2.100.11.1.11.6.1.2Columnshowmlsqosmapsdscpmutationcontentread-onlycurrentDSCP-DSCP map
1.3.6.1.4.1.259.8.1.2.100.12Nodeprimirror
1.3.6.1.4.1.259.8.1.2.100.12.1TablemirrorDestTablenot-accessiblecurrentDestination port for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.1.1RowmirrorDestEntrynot-accessiblecurrentDestination port for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.1.1.1ColumnmirrorDestSessionread-onlycurrentSession ID.
1.3.6.1.4.1.259.8.1.2.100.12.1.1.2ColumnmirrorDestPortread-createcurrentmirror destination port eg:Ethernet1/1.
1.3.6.1.4.1.259.8.1.2.100.12.1.1.3ColumnmirrorDestStatusread-createcurrentStatus.
1.3.6.1.4.1.259.8.1.2.100.12.2TablemirrorSrcPortTablenot-accessiblecurrentSrc port for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.2.1RowmirrorSrcPortEntrynot-accessiblecurrentSrc port for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.2.1.1ColumnmirrorSrcPortSessionread-onlycurrentSession ID.
1.3.6.1.4.1.259.8.1.2.100.12.2.1.2ColumnmirrorSrcPortDirectread-onlycurrentDirection of mirror.
1.3.6.1.4.1.259.8.1.2.100.12.2.1.3ColumnmirrorSrcPortread-createcurrentmirror source port. eg:Ethernet1/1.
1.3.6.1.4.1.259.8.1.2.100.12.2.1.4ColumnmirrorSrcPortStatusread-createcurrentStatus.
1.3.6.1.4.1.259.8.1.2.100.12.3TablemirrorSrcCpuTablenot-accessiblecurrentSrc Cpu for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.3.1RowmirrorSrcCpuEntrynot-accessiblecurrentSrc Cpu for mirrored packets.
1.3.6.1.4.1.259.8.1.2.100.12.3.1.1ColumnmirrorSrcCpuSessionread-onlycurrentSession ID.
1.3.6.1.4.1.259.8.1.2.100.12.3.1.2ColumnmirrorSrcCpuDirectread-onlycurrentDirection of mirror.
1.3.6.1.4.1.259.8.1.2.100.12.3.1.3ColumnmirrorSrcCpuSlotread-onlycurrentSrc cpu slot index.
1.3.6.1.4.1.259.8.1.2.100.12.3.1.4ColumnmirrorSrcCpuStatusread-createcurrentStatus.
1.3.6.1.4.1.259.8.1.2.100.12.4TablemirrorReflectorPortTablenot-accessiblecurrentmirror reflector destination port configuration Table of Rspan. The information about the reflector destination port and its associated session will be specifi…
1.3.6.1.4.1.259.8.1.2.100.12.4.1RowmirrorReflectorPortEntrynot-accessiblecurrentmirror destination port configuration of Rspan.
1.3.6.1.4.1.259.8.1.2.100.12.4.1.1ColumnmirrorReflectorPortSessionread-onlycurrentSession ID.
1.3.6.1.4.1.259.8.1.2.100.12.4.1.2ColumnmirrorReflectorPortread-onlycurrentmirror reflector destination port number.
1.3.6.1.4.1.259.8.1.2.100.12.4.1.3ColumnmirrorReflectorPortStatusread-createcurrentThe configuration status of the reflector destination port and its associated session.
1.3.6.1.4.1.259.8.1.2.100.12.5TablemirrorRspanVlanTablenot-accessiblecurrentVlan configuration Table of Rspan.
1.3.6.1.4.1.259.8.1.2.100.12.5.1RowmirrorRspanVlanEntrynot-accessiblecurrentVlan configuration of Rspan.
1.3.6.1.4.1.259.8.1.2.100.12.5.1.1ColumnmirrorRspanVlanread-onlycurrentVlan ID.
1.3.6.1.4.1.259.8.1.2.100.12.5.1.2ColumnmirrorRspanVlanStatusread-createcurrentVlan status.
1.3.6.1.4.1.259.8.1.2.100.12.6TablemirrorRspanSessionTablenot-accessiblecurrentSession configuration Table of Rspan.When creating an entry, the correctness of both the Vlan ID an the Session ID should be ensured. When destroying an entry,…
1.3.6.1.4.1.259.8.1.2.100.12.6.1RowmirrorRspanSessionEntrynot-accessiblecurrentSession configuration of Rspan.
1.3.6.1.4.1.259.8.1.2.100.12.6.1.1ColumnmirrorRspanSessionread-onlycurrentSession ID.
1.3.6.1.4.1.259.8.1.2.100.12.6.1.2ColumnmirrorRspanSessionVlanread-onlycurrentVlan ID.
1.3.6.1.4.1.259.8.1.2.100.12.6.1.3ColumnmirrorRspanSessionStatusread-createcurrentThe configuration status of the mirror session and its associated Rspan Vlan.
1.3.6.1.4.1.259.8.1.2.100.13Nodepridhcp
1.3.6.1.4.1.259.8.1.2.100.13.1NodedhcpRelay
1.3.6.1.4.1.259.8.1.2.100.13.1.1ScalardhcpRelayForwardUdpBootpsread-createcurrentif dhcp rely forward bootps udp broadcast packet,broadcast message bootps.
1.3.6.1.4.1.259.8.1.2.100.13.1.2TabledhcpRelayServerAddrTablenot-accessiblecurrentThe role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service us…
1.3.6.1.4.1.259.8.1.2.100.13.1.2.1RowdhcpRelayServerAddrEntrynot-accessiblecurrentA conceptual row of dhcpRelayServerAddrTable.
1.3.6.1.4.1.259.8.1.2.100.13.1.2.1.1ColumndhcpRelayServerAddrVlanIdnot-accessiblecurrentThe ID of VLAN interface used by this table entry.
1.3.6.1.4.1.259.8.1.2.100.13.1.2.1.2ColumndhcpRelayServerAddrIndexnot-accessiblecurrentThe index of relay address set in the VLAN interface.
1.3.6.1.4.1.259.8.1.2.100.13.1.2.1.3ColumndhcpRelayServerAddrServerIpread-writecurrentAppoint the destination address used for DHCP relay.
1.3.6.1.4.1.259.8.1.2.100.13.1.2.1.4ColumndhcpRelayServerAddrStatusread-writecurrentConfiguration status.
1.3.6.1.4.1.259.8.1.2.100.13.2NodedhcpServer
1.3.6.1.4.1.259.8.1.2.100.13.2.1ScalardhcpServerServiceStatusread-createcurrentSetting this to 1 to enable the dhcp server service. Setting this to 2 to disable the dhcp server service.
1.3.6.1.4.1.259.8.1.2.100.13.2.2ScalardhcploggingStatusread-createcurrentSetting this to 1 to enable the dhcp conflict logging. Setting this to 0 to disable the dhcp conflict logging.
1.3.6.1.4.1.259.8.1.2.100.13.2.3NodedhcpPool
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1TabledhcpPoolTablenot-accessiblecurrentA dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a h…
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1RowdhcpPoolEntrynot-accessiblecurrentA conceptual row of dhcpPoolTable.
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.1ColumndhcpPoolPoolNamenot-accessiblecurrentPoolName, simply specify a string.
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.2ColumndhcpPoolStatusread-createcurrentaccession delete the pool,according to dhcpPoolName
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.3ColumndhcpPoolAddressTyperead-createcurrentconfigure dhcppool of address style
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.4ColumndhcpPoolAddressread-createcurrentconfigurate dhcp pool. if dhcpPoolAddressType=1 configurate address range, if dhcpPoolAddressType=2 configurate single address
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.5ColumndhcpPoolAddressPrefixread-createcurrentdhcp pool ip address prefix
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.6ColumndhcpPoolAddressStatusread-createcurrentaddress of configuration satus
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.7ColumndhcpPoolMacAddressread-createcurrentappoint user of hardware address.Condition: dhcpPoolAddressType(2).
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.8ColumndhcpPoolProTyperead-createcurrentRFC define protocol style of number express,Condition:dhcpPoolAddressType(2).
1.3.6.1.4.1.259.8.1.2.100.13.2.3.1.1.9ColumndhcpPoolMacStatusread-createcurrenthardware address configure status.Condition: dhcpPoolAddressType(2).
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2TabledhcpPoolExpandTablenot-accessiblecurrentA dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a h…
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1RowdhcpPoolExpandEntrynot-accessiblecurrentA conceptual row of dhcpPoolExpandTable.
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.1ColumndhcpPoolExpandNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.2ColumndhcpPoolNetbiosNodeTyperead-createcurrentConfigure DHCP client of node style. For example, Broadcast node 1, Peer-to-peer node 2, Mixed node 4, Hybrid node 8
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.3ColumndhcpPoolDomainNameread-createcurrentDHCP client configure domain name
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.4ColumndhcpPoolBootFileread-createcurrentconfigure DHCP client boot-file name
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.5ColumndhcpPoolCLidread-createcurrentset dhcp pool client id. Condition: the pool of address is handcraft bind
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.6ColumndhcpPoolCLnameread-createcurrentconfigure user name. Condition: the pool address is handcraft bind.
1.3.6.1.4.1.259.8.1.2.100.13.2.3.2.1.7ColumndhcpPoolExpandstatusread-createcurrentif configure is valid(0),and the list of all configuration operatation accession if configure is destroy(1),and the list of all configuration operation delet
1.3.6.1.4.1.259.8.1.2.100.13.2.4TabledhcpLeaseTimeTablenot-accessiblecurrentconfigure rent term in address pool
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1RowdhcpLeaseTimeEntrynot-accessiblecurrentconfigure rent term in address pool
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.1ColumndhcpLeaseTimePoolNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.2ColumndhcpLeaseTimeTyperead-createcurrentrent time style,0 is temporarily rent,1 is forever rent
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.3ColumndhcpLeaseTimeDayread-createcurrentday,condition:dhcpLeaseTimeType=temp(0).
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.4ColumndhcpLeaseTimeHoursread-createcurrenthour,condition:dhcpLeaseTimeType=temp(0).
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.5ColumndhcpLeaseTimeMinutesread-createcurrenthour,condition:dhcpLeaseTimeType=temp(0).
1.3.6.1.4.1.259.8.1.2.100.13.2.4.1.6ColumndhcpLeaseTimeStatusread-createcurrentSetting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry. default status is 0,no opperation
1.3.6.1.4.1.259.8.1.2.100.13.2.5TabledhcpPoolOptionTablenot-accessiblecurrentconfigure pool of optional parameters
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1RowdhcpPoolOptionEntrynot-accessiblecurrentconfigure pool of optional parameters
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.1ColumndhcpPoolOptionNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.2ColumndhcpPoolOptionIndexnot-accessiblecurrentThe index of option which has been set in this pool
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.3ColumndhcpPoolOptionIdread-createcurrentdhcpPoolOptionId (0..254)
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.4ColumndhcpPoolOptionTyperead-createcurrentdhcpPoolOptionType
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.5ColumndhcpPoolOptionread-createcurrentif dhcpPoolOptionType=1, ASCII string if dhcpPoolOptionType=2, HEX string if dhcpPoolOptionType=3,IP address
1.3.6.1.4.1.259.8.1.2.100.13.2.5.1.6ColumndhcpPoolOptionStatusread-createcurrentoptional parameters configure status
1.3.6.1.4.1.259.8.1.2.100.13.2.6TabledhcpServerExcludedIpAddrTablenot-accessiblecurrentdhcpServer Excluded IpAddr Table
1.3.6.1.4.1.259.8.1.2.100.13.2.6.1RowdhcpServerExcludedIpAddrEntrynot-accessiblecurrentdhcpServer Excluded IpAddrEntry
1.3.6.1.4.1.259.8.1.2.100.13.2.6.1.1ColumndhcpServerExcludedIpAddrLowIpnot-accessiblecurrentThe excluded IP address, or first IP address in an excluded address range.
1.3.6.1.4.1.259.8.1.2.100.13.2.6.1.2ColumndhcpServerExcludedIpAddrHiIpnot-accessiblecurrentThe last IP address in the excluded address range.
1.3.6.1.4.1.259.8.1.2.100.13.2.6.1.3ColumndhcpServerExcludedIpAddrStatusread-createcurrentSetting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry.
1.3.6.1.4.1.259.8.1.2.100.13.2.8TabledhcpPoolDnsSerTablenot-accessiblecurrentdhcpPool Dns Server Table:the maximum 8 dns is allowed the first dns server has the highest priority.so address1 is highest priority,next is address2,address3.…
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1RowdhcpPoolDnsSerEntrynot-accessiblecurrentis DHCP client configure DNS server
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.1ColumndhcpPoolDnsSerPoolNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.2ColumndhcpPoolDnsSerIpAddress1read-createcurrentIP address,MUST.
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.3ColumndhcpPoolDnsSerIpAddress2read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.4ColumndhcpPoolDnsSerIpAddress3read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.5ColumndhcpPoolDnsSerIpAddress4read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.6ColumndhcpPoolDnsSerIpAddress5read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.7ColumndhcpPoolDnsSerIpAddress6read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.8ColumndhcpPoolDnsSerIpAddress7read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.9ColumndhcpPoolDnsSerIpAddress8read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.8.1.10ColumndhcpPoolDnsSerStatusread-createcurrentconfigure DNS server status
1.3.6.1.4.1.259.8.1.2.100.13.2.9TabledhcpPoolDefaultRouterTablenot-accessiblecurrentdhcpPoolDefaultRouterTable: the maximum 8 default gateway address can be set,the first gateway has the highest priority, So address1 has the highest priority,n…
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1RowdhcpPoolDefaultRouterEntrynot-accessiblecurrentDHCP client machine configure default gateway
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.1ColumndhcpPoolDefaultRouterPoolNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.2ColumndhcpPoolDefaultRouterIpAddress1read-createcurrentIP address,must
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.3ColumndhcpPoolDefaultRouterIpAddress2read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.4ColumndhcpPoolDefaultRouterIpAddress3read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.5ColumndhcpPoolDefaultRouterIpAddress4read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.6ColumndhcpPoolDefaultRouterIpAddress5read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.7ColumndhcpPoolDefaultRouterIpAddress6read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.8ColumndhcpPoolDefaultRouterIpAddress7read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.9ColumndhcpPoolDefaultRouterIpAddress8read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.9.1.10ColumndhcpPoolDefaultRouterStatusread-createcurrentconfigure default gateway state machine
1.3.6.1.4.1.259.8.1.2.100.13.2.10TabledhcpPoolNextServerTablenot-accessiblecurrentdhcpPoolNextServerTable
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1RowdhcpPoolNextServerEntrynot-accessiblecurrentdhcpPoolNextServerEntry
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.1ColumndhcpPoolNextServerPoolNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.2ColumndhcpPoolNextServerIpAddress1read-createcurrentIP address,must
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.3ColumndhcpPoolNextServerIpAddress2read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.4ColumndhcpPoolNextServerIpAddress3read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.5ColumndhcpPoolNextServerIpAddress4read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.6ColumndhcpPoolNextServerIpAddress5read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.7ColumndhcpPoolNextServerIpAddress6read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.8ColumndhcpPoolNextServerIpAddress7read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.9ColumndhcpPoolNextServerIpAddress8read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.10.1.10ColumndhcpPoolNextServerStatusread-createcurrentstatus machine
1.3.6.1.4.1.259.8.1.2.100.13.2.11TabledhcpPoolWinsTablenot-accessiblecurrentdhcpPoolWinsTable
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1RowdhcpPoolWinsEntrynot-accessiblecurrentconfigure Wins sever address
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.1ColumndhcpPoolWinsPoolNamenot-accessiblecurrentPoolName, simply specify a string which string size NO MORE THAN 8
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.2ColumndhcpPoolWinsIpAddress1read-createcurrentIP address,must
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.3ColumndhcpPoolWinsIpAddress2read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.4ColumndhcpPoolWinsIpAddress3read-createcurrentIPaddress,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.5ColumndhcpPoolWinsIpAddress4read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.6ColumndhcpPoolWinsIpAddress5read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.7ColumndhcpPoolWinsIpAddress6read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.8ColumndhcpPoolWinsIpAddress7read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.9ColumndhcpPoolWinsIpAddress8read-createcurrentIP address,option
1.3.6.1.4.1.259.8.1.2.100.13.2.11.1.10ColumndhcpPoolWinsStatusread-createcurrentconfigure wins server status machine
1.3.6.1.4.1.259.8.1.2.100.13.2.12TabledhcpServerLeaseBindingTablenot-accessiblecurrentexpress IP address and MAC address bind status
1.3.6.1.4.1.259.8.1.2.100.13.2.12.1RowdhcpServerLeaseBindingEntrynot-accessiblecurrentexpress IP address and MAC address bind status
1.3.6.1.4.1.259.8.1.2.100.13.2.12.1.1ColumndhcpServerLeaseBindingIpread-onlycurrentcertain address appointed, format is x.x.x.x
1.3.6.1.4.1.259.8.1.2.100.13.2.12.1.2ColumndhcpServerLeaseBindingTyperead-onlycurrentmanual express handcraft bind style;dynamic express dynamic distribution style
1.3.6.1.4.1.259.8.1.2.100.13.2.12.1.3ColumndhcpServerLeaseBindingMacread-onlycurrentMAC address
1.3.6.1.4.1.259.8.1.2.100.13.2.12.1.4ColumndhcpServerLeaseBindingLeaseTimeread-onlycurrentrent term
1.3.6.1.4.1.259.8.1.2.100.14NodepriportGroup
1.3.6.1.4.1.259.8.1.2.100.14.1ScalarsystemPriorityread-createcurrentModify the system priority which is used by port group.
1.3.6.1.4.1.259.8.1.2.100.14.2TableportGroupTablenot-accessiblecurrentThis table contains port group information associated with the local system known to this agent.
1.3.6.1.4.1.259.8.1.2.100.14.2.1RowportGroupEntrynot-accessiblecurrentConfigure the port group information.
1.3.6.1.4.1.259.8.1.2.100.14.2.1.1ColumnportGroupIndexnot-accessiblecurrentPort group number.
1.3.6.1.4.1.259.8.1.2.100.14.2.1.2ColumnportGroupMemberCountread-onlycurrentThe number of port group member.
1.3.6.1.4.1.259.8.1.2.100.14.2.1.3ColumnloadBalanceread-createcurrentLoad balancing method: dst-src-mac(1):destination and source mac address; dst-src-ip(2):destination and source ip address; src-mac(3):source mac address; dst-m…
1.3.6.1.4.1.259.8.1.2.100.14.2.1.4ColumnportGroupInforead-onlycurrentPort group brief information. Format is ID, Mode, Partner ID, Ports and Load-balance. If there is no member in the port group, the value is empty.
1.3.6.1.4.1.259.8.1.2.100.14.3TableportGroupPortListTablenot-accessiblecurrentThis table contains port group member information associated with the local system known to this agent.
1.3.6.1.4.1.259.8.1.2.100.14.3.1RowportGroupPortListEntrynot-accessiblecurrentConfigure the port group member information.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.1ColumnportGroupMemberIndexnot-accessiblecurrentPort group member index. Format is group number and port index of member.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.2ColumnportGroupMemberNameread-onlycurrentThe name of port group member.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.3ColumnportGroupMemberModeread-onlycurrentThe mode of port group member.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.4ColumnportGroupMemberPriorityread-writecurrentThe port priority of port group member. If the port group mode is on, the value is -1.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.5ColumnportGroupMemberTimeoutread-onlycurrentThe timeout mode of port group member. If the port group mode is on, the value is -1.
1.3.6.1.4.1.259.8.1.2.100.14.3.1.6ColumnportGroupMemberStatusread-onlycurrentThe status of port group member. If the port group mode is on, the value is -1.
1.3.6.1.4.1.259.8.1.2.100.15NodeprisnmpMgt
1.3.6.1.4.1.259.8.1.2.100.15.1ScalarsnmpSecurityIpStatusread-createcurrentEnable or disable secure IP address check function on the NMS.
1.3.6.1.4.1.259.8.1.2.100.15.2ScalarsnmpTrapHostStatusread-createcurrentEnable the switch to send Trap message. This command is used for SNMP v1/v2.
1.3.6.1.4.1.259.8.1.2.100.15.3ScalarsnmpRmonStatusread-createcurrentEnable/disable RMON.
1.3.6.1.4.1.259.8.1.2.100.15.4TablesecurityIpTablenot-accessiblecurrentA list of snmp securityIp entries.
1.3.6.1.4.1.259.8.1.2.100.15.4.1RowsecurityIpEntrynot-accessiblecurrentConfigure the secure IP address which is allowed to access the switch on the NMS;
1.3.6.1.4.1.259.8.1.2.100.15.4.1.1ColumnsecurityIpIndexnot-accessiblecurrentIndex.
1.3.6.1.4.1.259.8.1.2.100.15.4.1.2ColumnsecurityIpAddressread-createcurrentThe address of security.
1.3.6.1.4.1.259.8.1.2.100.15.4.1.3ColumnsecurityIpStatusread-createcurrentWriting this to active(1) creates an entry. Writing this to destroy(2) destroys an entry.
1.3.6.1.4.1.259.8.1.2.100.15.5TabletrapDestTablenot-accessiblecurrentA list of trap destination entries.
1.3.6.1.4.1.259.8.1.2.100.15.5.1RowtrapDestEntrynot-accessiblecurrentThis entry includes a destination IP address to which to send traps for this community.
1.3.6.1.4.1.259.8.1.2.100.15.5.1.1ColumntrapDestIndexnot-accessiblecurrentIndex
1.3.6.1.4.1.259.8.1.2.100.15.5.1.2ColumntrapDestAddressread-createcurrentThe address to send traps.
1.3.6.1.4.1.259.8.1.2.100.15.5.1.3ColumntrapDestVersionread-createcurrentThis variables represent the version of the Trap we wish to send to trap Receiver. If the value is 0, mean we wish to send Version 1 trap. If the value is 1, m…
1.3.6.1.4.1.259.8.1.2.100.15.5.1.4ColumntrapDestCommunityread-createcurrentA community to which this destination address belongs.
1.3.6.1.4.1.259.8.1.2.100.15.5.1.5ColumntrapDestStatusread-createcurrentWriting this to active(1) creates an entry. Writing this to destroy(2) destroys an entry.
1.3.6.1.4.1.259.8.1.2.100.16Nodel3
1.3.6.1.4.1.259.8.1.2.100.16.1NodearpMgt
1.3.6.1.4.1.259.8.1.2.100.16.1.1ScalararpCacheDeleteAllread-createcurrentwhen set , triger flush arp-cache, when get ,nosense
1.3.6.1.4.1.259.8.1.2.100.16.1.2ScalararpCacheTimeoutread-onlycurrentarp cache timeout time
1.3.6.1.4.1.259.8.1.2.100.16.1.3ScalararpSecurityUpdateProtectALLread-createcurrentglobal enable or disable arp security update protect
1.3.6.1.4.1.259.8.1.2.100.16.1.4ScalararpSecurityLearnProtectALLread-createcurrentglobal enable or disable arp security learn protect
1.3.6.1.4.1.259.8.1.2.100.16.1.5ScalararpSecurityConvertALLread-createcurrentglobal convert dynamic arp-cache to static arp item .enable mean convert
1.3.6.1.4.1.259.8.1.2.100.16.1.6TablearpSecurityTablenot-accessiblecurrentarp security table
1.3.6.1.4.1.259.8.1.2.100.16.1.6.1RowarpsecurityEntrynot-accessiblecurrentindex is L3 interface index
1.3.6.1.4.1.259.8.1.2.100.16.1.6.1.1ColumnarpSecurityIfindexnot-accessiblecurrentL3 interface index
1.3.6.1.4.1.259.8.1.2.100.16.1.6.1.2ColumnarpSecurityUpdateProtectread-createcurrentenable or disable arp security update protect on the current port
1.3.6.1.4.1.259.8.1.2.100.16.1.6.1.3ColumnarpSecurityLearnProtectread-createcurrentenable or disable arp security learn protect on the current port
1.3.6.1.4.1.259.8.1.2.100.16.1.6.1.4ColumnarpSecurityConvertread-createcurrentconvert dynamic arp-cache to static arp item on the port.enable mean convert,get OPS is nosense
1.3.6.1.4.1.259.8.1.2.100.16.1.7TablearpProxyArpTablenot-accessiblecurrentconfigure arp proxy list
1.3.6.1.4.1.259.8.1.2.100.16.1.7.1RowarpProxyArpEntrynot-accessiblecurrentindex is L3 interface index
1.3.6.1.4.1.259.8.1.2.100.16.1.7.1.1ColumnarpProxyArpIfIndexnot-accessiblecurrentL3 interface index
1.3.6.1.4.1.259.8.1.2.100.16.1.7.1.2ColumnarpProxyArpStatusread-createcurrentarp proxy enable
1.3.6.1.4.1.259.8.1.2.100.16.1.8TablearpStacticTablenot-accessiblecurrentstatic state arp configuration list
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1RowarpStaticEntrynot-accessiblecurrentindex is 'arpProxyArpIfIndex.arpStaticIpaddress'.
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1.1ColumnarpStaticIfindexnot-accessiblecurrentL3 interface index
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1.2ColumnarpStaticIpaddressnot-accessiblecurrentip address
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1.3ColumnarpStaticMacread-createcurrentthe Mac address of the arp item
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1.4ColumnarpStaticPortIndexread-createcurrentthe port index of the arp item
1.3.6.1.4.1.259.8.1.2.100.16.1.8.1.5ColumnarpStaticStatusread-createcurrentvalid(1),this is a active arp when get/getnext; when set,mean create the static arp item invalid(2); when set, mean destory the current arp item waitingforset(…
1.3.6.1.4.1.259.8.1.2.100.16.2NoderouteMgt
1.3.6.1.4.1.259.8.1.2.100.16.2.1TableipStaticRouteExtTablenot-accessiblecurrentstatic route configuration list
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1RowipStaticRouteExtEntrynot-accessiblecurrentThe index of this table is ip.mask
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1.1ColumnipStaticRouteExtDestnot-accessiblecurrentstatic route of intention net segment
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1.2ColumnipStaticRouteExtMasknot-accessiblecurrentmask
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1.3ColumnipStaticRouteExtNextHopread-createcurrentnext step ip
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1.4ColumnipStaticRouteExtMetricread-createcurrentManage distance/PRI
1.3.6.1.4.1.259.8.1.2.100.16.2.1.1.5ColumnipStaticRouteExtStatusread-createcurrentWhen you get/getnext one entry, the meaning of 'valid' is that the static route which you get is valid (or active); when you want to configure one static route…
1.3.6.1.4.1.259.8.1.2.100.16.3NoderipMgt
1.3.6.1.4.1.259.8.1.2.100.16.3.1NoderipTimers
1.3.6.1.4.1.259.8.1.2.100.16.3.1.1ScalarripUpdateTimeread-writecurrentThe update time in seconds controls the advertising of regular update messages. The real working model, while using this timer, the time should be offset by a …
1.3.6.1.4.1.259.8.1.2.100.16.3.1.2ScalarripTimeoutTimeread-writecurrentThe timeout timer in seconds governs the validity of a route. It is initialized when a route is established, and any time an update message is received for the…
1.3.6.1.4.1.259.8.1.2.100.16.3.1.3ScalarripGarbageCollectionTimeread-writecurrentWhen the information about a route becomes invalid, the system should not immediately purge that route from its table. Instead, it continues to advertise the r…
1.3.6.1.4.1.259.8.1.2.100.16.3.2ScalarripRoutingProcessStatusread-writecurrentEnable or Disable RIP routing process on a system.
1.3.6.1.4.1.259.8.1.2.100.16.3.3ScalarripRouterVersionread-writecurrentTo specify a RIP version used globally by the rourter.
1.3.6.1.4.1.259.8.1.2.100.16.3.4TableripInstabilityPreventingTablenot-accessiblecurrentA list of RIP instability preventing status
1.3.6.1.4.1.259.8.1.2.100.16.3.4.1RowripInstabilityPreventingEntrynot-accessiblecurrentAn entry in the table, containing information about RIP instability preventing configuration. The ifIndex index is a VLAN's ifIndex
1.3.6.1.4.1.259.8.1.2.100.16.3.4.1.1ColumnripVlanIndexread-onlycurrentThis is defined as a VLAN interface. A routing interface is a VLAN binds a IP subnet.
1.3.6.1.4.1.259.8.1.2.100.16.3.4.1.2ColumnripSplitHorizonStatusread-writecurrentEnable or Disable RIP instability preventing status on an interface
1.3.6.1.4.1.259.8.1.2.100.16.3.5ScalarripStatisticsResetread-writecurrentWrite it to reset(1), the following objects in RFC 1724 should be reset: 1. Global Counters: 'rip2GlobalRouteChanges', 'rip2GlobalQueries'. 2. Interface Status…
1.3.6.1.4.1.259.8.1.2.100.16.3.6TableripNetworkInterfaceTablenot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.16.3.6.1RowripNetworkInterfaceEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.16.3.6.1.1ColumnripNetworkInterfaceAddressread-onlycurrentThe RIP Network address(the ip address of the interface).
1.3.6.1.4.1.259.8.1.2.100.16.3.6.1.2ColumnripNetworkInterfaceStatusread-createcurrentSet this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a …
1.3.6.1.4.1.259.8.1.2.100.16.3.7TableripNetworkAddrTablenot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.16.3.7.1RowripNetworkAddrEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.16.3.7.1.1ColumnripNetworkAddrAddressread-onlycurrentThe RIP Network address.
1.3.6.1.4.1.259.8.1.2.100.16.3.7.1.2ColumnripNetworkAddrPrefixLenread-onlycurrentThe RIP Network prefix length of address.
1.3.6.1.4.1.259.8.1.2.100.16.3.7.1.3ColumnripNetworkAddrStatusread-createcurrentSet this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a …
1.3.6.1.4.1.259.8.1.2.100.16.4NodeospfMgt
1.3.6.1.4.1.259.8.1.2.100.16.4.1NodeospfSystemGroup
1.3.6.1.4.1.259.8.1.2.100.16.4.1.1ScalarospfRouterIdTyperead-onlycurrentSet router ID automatically or manually.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.2ScalarospfRfc1583CompatibleStateread-writecurrentEnable or disable rfc1583 compatibility.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.3ScalarospfAutoCostread-writecurrentSet the reference bandwith of auto cost, the unit is Mbps.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.4ScalarospfAdvertiseDefaultRouteread-writecurrentIf always is set, always advertises the default route regardless of whether the default route exists;If notalways is set ,advertises the default route when the…
1.3.6.1.4.1.259.8.1.2.100.16.4.1.5ScalarospfDefaultExternalMetricread-writecurrentMetric used for generating the default route.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.6ScalarospfSpfHoldTimeread-writecurrentSets the hold time between two consecutive SPF calculations.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.7ScalarospfSpfDelayTimeread-writecurrentSets the delay time to calculate SPF Delay time, in seconds, between when OSPF receives a topology change and when it starts an SPF calculation.
1.3.6.1.4.1.259.8.1.2.100.16.4.1.8ScalarospfAreaNumberread-onlycurrentRecords the OSPF area numbers.
1.3.6.1.4.1.259.8.1.2.100.16.4.2TableospfNssaTablenot-accessiblecurrentA conceptually table for ospfNssaEntry.
1.3.6.1.4.1.259.8.1.2.100.16.4.2.1RowospfNssaEntrynot-accessiblecurrentA conceptually row for ospfNssaTable.
1.3.6.1.4.1.259.8.1.2.100.16.4.2.1.1ColumnospfNssaAreaIdread-onlycurrentThe 32-bit identifier for the NSSA. On creation, this can be derived from the instance.
1.3.6.1.4.1.259.8.1.2.100.16.4.2.1.2ColumnospfNssaStatusread-createcurrentThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.259.8.1.2.100.16.4.2.1.3ColumnospfNssaRedistributeStatusread-createcurrentEnabled or disabled to import routes only into the normal areas, but not into the NSSA area.
1.3.6.1.4.1.259.8.1.2.100.16.4.2.1.4ColumnospfNssaOriginateDefaultInfoStatusread-createcurrentEnable or disable to generate a Type 7 default into the NSSA area.
1.3.6.1.4.1.259.8.1.2.100.16.4.3TableospfRedistributeTablenot-accessiblecurrentThe conceptual table of all of ospfRedistributeEntry.
1.3.6.1.4.1.259.8.1.2.100.16.4.3.1RowospfRedistributeEntrynot-accessiblecurrentThe conceptual row for ospfRedistributeTable.
1.3.6.1.4.1.259.8.1.2.100.16.4.3.1.1ColumnospfRedistributeProtocolread-onlycurrentProtocol ID.
1.3.6.1.4.1.259.8.1.2.100.16.4.3.1.2ColumnospfRedistributeStatusread-createcurrentenable when the ospfRedistributeProtocol is equal to rip, 'enable' stands for redistribute the route from rip.
1.3.6.1.4.1.259.8.1.2.100.16.4.3.1.3ColumnospfRedistributeMetricTyperead-createcurrentMetric type.
1.3.6.1.4.1.259.8.1.2.100.16.4.3.1.4ColumnospfRedistributeMetricread-createcurrentMetric value.
1.3.6.1.4.1.259.8.1.2.100.16.4.4TableospfSummaryAddressTablenot-accessiblecurrentThe conceptual table of all of ospfSummaryAddressEntry.
1.3.6.1.4.1.259.8.1.2.100.16.4.4.1RowospfSummaryAddressEntrynot-accessiblecurrentThe conceptual row for ospfSummaryAddressTable.
1.3.6.1.4.1.259.8.1.2.100.16.4.4.1.1ColumnospfSummaryAddressread-onlycurrentSummary address.
1.3.6.1.4.1.259.8.1.2.100.16.4.4.1.2ColumnospfSummaryMaskread-onlycurrentSummary mask.
1.3.6.1.4.1.259.8.1.2.100.16.4.4.1.3ColumnospfSummaryStatusread-createcurrent
1.3.6.1.4.1.259.8.1.2.100.16.4.5TableospfNetworkAreaAddressTablenot-accessiblecurrentThe conceptual table of all of ospfNetworkAreaAddressEntry.
1.3.6.1.4.1.259.8.1.2.100.16.4.5.1RowospfNetworkAreaAddressEntrynot-accessiblecurrentThe conceptual row for ospfNetworkAreaAddressTable.
1.3.6.1.4.1.259.8.1.2.100.16.4.5.1.1ColumnospfNetworkAareaAddressread-onlycurrentNetworkArea address.
1.3.6.1.4.1.259.8.1.2.100.16.4.5.1.2ColumnospfNetworkAreaMaskread-onlycurrentNetworkArea mask.
1.3.6.1.4.1.259.8.1.2.100.16.4.5.1.3ColumnospfNetworkAreaAreaIdread-onlycurrentNetworkArea area ID.
1.3.6.1.4.1.259.8.1.2.100.16.4.5.1.4ColumnospfNetworkAreaStatusread-createcurrentenabled(1), disabled(0). valid/enable invalid/disable ValidStatus: A simple status value for the object to create and destroy a table entry. This is a simplifi…
1.3.6.1.4.1.259.8.1.2.100.16.5NodedvmrpMgt
1.3.6.1.4.1.259.8.1.2.100.16.5.1NodedvmrpScalar
1.3.6.1.4.1.259.8.1.2.100.16.5.1.1ScalardvmrpVersionStringread-onlycurrentThe router's DVMRP version information. Similar to sysDescr in MIB-II, this is a free-form field which can be used to display vendor-specific information.
1.3.6.1.4.1.259.8.1.2.100.16.5.1.3ScalardvmrpNumRoutesread-onlycurrentThe number of entries in the routing table. This can be used to monitor the routing table size.
1.3.6.1.4.1.259.8.1.2.100.16.5.1.4ScalardvmrpReachableRoutesread-onlycurrentThe number of entries in the routing table with non infinite metrics. This can be used to detect network partitions by observing the ratio of reachable routes …
1.3.6.1.4.1.259.8.1.2.100.16.5.2TabledvmrpInterfaceTablenot-accessiblecurrentThe (conceptual) table listing the router's multicast- capable interfaces.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1RowdvmrpInterfaceEntrynot-accessiblecurrentAn entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.1ColumndvmrpInterfaceIndexread-onlycurrentThe ifIndex value of the interface for which DVMRP is enabled.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.2ColumndvmrpInterfaceLocalAddressread-onlycurrentThe IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress fo…
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.3ColumndvmrpInterfaceMetricread-createcurrentThe distance metric for this interface which is used to calculate distance vectors.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.4ColumndvmrpInterfaceStatusread-createcurrentThe status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the v…
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.5ColumndvmrpInterfaceRcvBadPktsread-onlycurrentThe number of DVMRP messages received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a rout…
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.6ColumndvmrpInterfaceRcvBadRoutesread-onlycurrentThe number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.7ColumndvmrpInterfaceSentRoutesread-onlycurrentThe number of routes, in DVMRP Report packets, which have been sent on this interface. Together with dvmrpNeighborRcvRoutes at a peer, this object is useful fo…
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.8ColumndvmrpInterfaceKeyread-onlycurrentThe (shared) key for authenticating neighbors on this interface. This object is intended solely for the purpose of setting the interface key, and MUST be acces…
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.9ColumndvmrpInterfaceKeyVersionread-onlycurrentThe highest version number of all known interface keys for this interface used for authenticating neighbors.
1.3.6.1.4.1.259.8.1.2.100.16.5.2.1.10ColumndvmrpInterfaceGenerationIdread-onlycurrentThe generation identifier for the interface. This is used by neighboring routers to detect whether the DVMRP routing table should be resent.
1.3.6.1.4.1.259.8.1.2.100.16.5.3TabledvmrpNeighborTablenot-accessiblecurrentThe (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving DVMRP messages.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1RowdvmrpNeighborEntrynot-accessiblecurrentAn entry (conceptual row) in the dvmrpNeighborTable.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.1ColumndvmrpNeighborIfIndexread-onlycurrentThe value of ifIndex for the virtual interface used to reach this DVMRP neighbor.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.2ColumndvmrpNeighborAddressread-onlycurrentThe IP address of the DVMRP neighbor for which this entry contains information.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.3ColumndvmrpNeighborUpTimeread-onlycurrentThe time since this DVMRP neighbor (last) became a neighbor of the local router.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.4ColumndvmrpNeighborExpiryTimeread-onlycurrentThe minimum time remaining before this DVMRP neighbor will be aged out.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.5ColumndvmrpNeighborGenerationIdread-onlycurrentThe neighboring router's generation identifier.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.6ColumndvmrpNeighborMajorVersionread-onlycurrentThe neighboring router's major DVMRP version number.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.7ColumndvmrpNeighborMinorVersionread-onlycurrentThe neighboring router's minor DVMRP version number.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.8ColumndvmrpNeighborCapabilitiesread-onlycurrentThis object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indi…
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.9ColumndvmrpNeighborRcvRoutesread-onlycurrentThe total number of routes received in valid DVMRP packets received from this neighbor. This can be used to diagnose problems such as unicast route injection, …
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.10ColumndvmrpNeighborRcvBadPktsread-onlycurrentThe number of packet received from this neighbor which were discarded as invalid.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.11ColumndvmrpNeighborRcvBadRoutesread-onlycurrentThe number of routes, in valid DVMRP packets received from this neighbor, which were ignored because the entry was invalid.
1.3.6.1.4.1.259.8.1.2.100.16.5.3.1.12ColumndvmrpNeighborStateread-onlycurrentState of the neighbor adjacency.
1.3.6.1.4.1.259.8.1.2.100.16.5.4TabledvmrpRouteTablenot-accessiblecurrentThe table of routes learned through DVMRP route exchange.
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1RowdvmrpRouteEntrynot-accessiblecurrentAn entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information.
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.1ColumndvmrpRouteSourceread-onlycurrentThe network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast rou…
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.2ColumndvmrpRouteSourceMaskread-onlycurrentThe network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing in…
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.3ColumndvmrpRouteUpstreamNeighborread-onlycurrentThe address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.4ColumndvmrpRouteIfIndexread-onlycurrentThe value of ifIndex for the interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for whi…
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.5ColumndvmrpRouteMetricread-onlycurrentThe distance in hops to the source subnet.
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.6ColumndvmrpRouteExpiryTimeread-onlycurrentThe minimum amount of time remaining before this entry will be aged out.
1.3.6.1.4.1.259.8.1.2.100.16.5.4.1.7ColumndvmrpRouteUpTimeread-onlycurrentThe time since the route represented by this entry was learned by the router.
1.3.6.1.4.1.259.8.1.2.100.16.5.5TabledvmrpRouteNextHopTablenot-accessiblecurrentThe (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams.
1.3.6.1.4.1.259.8.1.2.100.16.5.5.1RowdvmrpRouteNextHopEntrynot-accessiblecurrentAn entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed.
1.3.6.1.4.1.259.8.1.2.100.16.5.5.1.1ColumndvmrpRouteNextHopSourceread-onlycurrentThe network address which when combined with the corresponding value of dvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a nex…
1.3.6.1.4.1.259.8.1.2.100.16.5.5.1.2ColumndvmrpRouteNextHopSourceMaskread-onlycurrentThe network mask which when combined with the corresponding value of dvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop o…
1.3.6.1.4.1.259.8.1.2.100.16.5.5.1.3ColumndvmrpRouteNextHopIfIndexread-onlycurrentThe ifIndex value of the interface for the outgoing interface for this next hop.
1.3.6.1.4.1.259.8.1.2.100.16.5.5.1.4ColumndvmrpRouteNextHopTyperead-onlycurrentType is leaf if no downstream dependent neighbors exist on the outgoing virtual interface. Otherwise, type is branch.
1.3.6.1.4.1.259.8.1.2.100.16.5.6TabledvmrpPruneTablenot-accessiblecurrentThe (conceptual) table listing the router's upstream prune state.
1.3.6.1.4.1.259.8.1.2.100.16.5.6.1RowdvmrpPruneEntrynot-accessiblecurrentAn entry (conceptual row) in the dvmrpPruneTable.
1.3.6.1.4.1.259.8.1.2.100.16.5.6.1.1ColumndvmrpPruneGroupread-onlycurrentThe group address which has been pruned.
1.3.6.1.4.1.259.8.1.2.100.16.5.6.1.2ColumndvmrpPruneSourceread-onlycurrentThe address of the source or source network which has been pruned.
1.3.6.1.4.1.259.8.1.2.100.16.5.6.1.3ColumndvmrpPruneSourceMaskread-onlycurrentThe address of the source or source network which has been pruned. The mask must either be all 1's, or else dvmrpPruneSource and dvmrpPruneSourceMask must matc…
1.3.6.1.4.1.259.8.1.2.100.16.5.6.1.4ColumndvmrpPruneExpiryTimeread-onlycurrentThe amount of time remaining before this prune should expire at the upstream neighbor. This value should be the minimum of the default prune lifetime and the r…
1.3.6.1.4.1.259.8.1.2.100.17NodesntpMgt
1.3.6.1.4.1.259.8.1.2.100.17.1ScalarsntpPollTimeread-writecurrentThe interval for SNTP clients to send requests to NTP/SNTP.
1.3.6.1.4.1.259.8.1.2.100.17.2TablesntpServerTablenot-accessiblecurrentThe ipv4 sntp server configration table.
1.3.6.1.4.1.259.8.1.2.100.17.2.1RowsntpServerEntrynot-accessiblecurrentA set of configuration parameters for a ipv4 sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.2.1.1ColumnsntpServerVersionread-onlycurrentThe version of ipv4 sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.2.1.2ColumnsntpServerAddressread-onlycurrentThe ipv4 address of the sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.2.1.3ColumnsntpServerStatusread-createcurrentNow state.
1.3.6.1.4.1.259.8.1.2.100.17.3TablesntpServer6Tablenot-accessiblecurrentThe ipv6 sntp server configration table.
1.3.6.1.4.1.259.8.1.2.100.17.3.1RowsntpServer6Entrynot-accessiblecurrentA set of configuration parameters for a ipv6 sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.3.1.1ColumnsntpServer6Versionread-onlycurrentThe version of ipv6 sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.3.1.2ColumnsntpServer6Addressread-onlycurrentThe IP address of the ipv6 sntp server.
1.3.6.1.4.1.259.8.1.2.100.17.3.1.3ColumnsntpServer6Statusread-createcurrentNow state.
1.3.6.1.4.1.259.8.1.2.100.17.4NodesntpTimeZone
1.3.6.1.4.1.259.8.1.2.100.17.4.1ScalarsntpTimeZoneNameread-writecurrentThe name of sntp time zone.
1.3.6.1.4.1.259.8.1.2.100.17.4.2ScalarsntpTimeZoneTyperead-writecurrentThe type of sntp time zone.
1.3.6.1.4.1.259.8.1.2.100.17.4.3ScalarsntpTimeZoneTimeread-writecurrentThe interval time of sntp time zone.
1.3.6.1.4.1.259.8.1.2.100.17.4.4ScalarsntpTimeZoneStatusread-writecurrentnow state of sntp time zone.
1.3.6.1.4.1.259.8.1.2.100.18Nodeurpf
1.3.6.1.4.1.259.8.1.2.100.18.1ScalarurpfEnableread-writecurrentGlobal Enable or disable the Unicast reverse path forwarding.
1.3.6.1.4.1.259.8.1.2.100.18.2TableurpfPortTablenot-accessiblecurrentThe URPF port configration table.
1.3.6.1.4.1.259.8.1.2.100.18.2.1RowurpfPortEntrynot-accessiblecurrentThe index of this table is port index.
1.3.6.1.4.1.259.8.1.2.100.18.2.1.1ColumnurpfPortIndexread-onlycurrentPort Index.
1.3.6.1.4.1.259.8.1.2.100.18.2.1.2ColumnurpfPortModeread-createcurrentConfigration of the URPF mode on the port.
1.3.6.1.4.1.259.8.1.2.100.18.2.1.3ColumnurpfPortAllowDefaultread-createcurrentAllow or not allow default route of URPF.
1.3.6.1.4.1.259.8.1.2.100.18.2.1.4ColumnurpfPortStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.20Nodedcscm
1.3.6.1.4.1.259.8.1.2.100.20.1ScalardcscmdcEnableread-writecurrentDcscm destination control multicast is disable or enable
1.3.6.1.4.1.259.8.1.2.100.20.2NodedcscmdcAcl
1.3.6.1.4.1.259.8.1.2.100.20.2.1ScalardcscmdcAclNumberread-createcurrent
1.3.6.1.4.1.259.8.1.2.100.20.2.2ScalardcscmdcAclSourceIpread-createcurrentSource ip address of acl entry
1.3.6.1.4.1.259.8.1.2.100.20.2.3ScalardcscmdcAclSourceMaskread-createcurrentSource Mask of acl entry
1.3.6.1.4.1.259.8.1.2.100.20.2.4ScalardcscmdcAclDestinationIpread-createcurrentDestination ip address of acl entry.the destination ip must be a valid multicast group address.
1.3.6.1.4.1.259.8.1.2.100.20.2.5ScalardcscmdcAclDestinationMaskread-createcurrentDestination Mask of acl entry. the destination mask should meet the request of muticast group address.
1.3.6.1.4.1.259.8.1.2.100.20.2.6ScalardcscmdcAclPermitOrDenyread-writecurrentacl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry
1.3.6.1.4.1.259.8.1.2.100.20.3TabledcscmVMacbindingTablenot-accessiblecurrentdcscm destination control multicast, Acl is binded to VMac
1.3.6.1.4.1.259.8.1.2.100.20.3.1RowdcscmVMacbindingEntrynot-accessiblecurrentThe index of this table is Vlanid,MacAddress
1.3.6.1.4.1.259.8.1.2.100.20.3.1.1ColumndcscmVMacbindingVlanidread-onlycurrentDcscm destination control multicast,The vlanid of rule
1.3.6.1.4.1.259.8.1.2.100.20.3.1.2ColumndcscmVMacbindingMacAddrread-onlycurrentDcscm destination control multicast,The Mac Address of rule
1.3.6.1.4.1.259.8.1.2.100.20.3.1.3ColumndcscmVMacbindingAclNumberread-writecurrentDcscm destination control multicast,The Acl number of rule ; 0 means del the rule binded to vmac
1.3.6.1.4.1.259.8.1.2.100.20.4TabledcscmSipbindingTablenot-accessiblecurrentdcscm destination control multicast, Acl is binded to Sip
1.3.6.1.4.1.259.8.1.2.100.20.4.1RowdcscmSipbindingEntrynot-accessiblecurrentThe index of this table is Sourceip,SourceMask
1.3.6.1.4.1.259.8.1.2.100.20.4.1.1ColumndcscmSipbindingSipAddressread-onlycurrentDcscm destination control multicast,The Source ip of rule
1.3.6.1.4.1.259.8.1.2.100.20.4.1.2ColumndcscmSipbindingSipMaskread-onlycurrentDcscm destination control multicast,The Source ip mask len of rule
1.3.6.1.4.1.259.8.1.2.100.20.4.1.3ColumndcscmSipbindingAclNumberread-writecurrentDcscm destination control multicast,The Acl number of rule;0 means del the rule binded to sip
1.3.6.1.4.1.259.8.1.2.100.20.5TabledcscmdcPortbindingTablenot-accessiblecurrentdcscm destination control multicast, Acl is binded to Port
1.3.6.1.4.1.259.8.1.2.100.20.5.1RowdcscmdcPortbindingEntrynot-accessiblecurrentThe index of this table is PortName
1.3.6.1.4.1.259.8.1.2.100.20.5.1.1ColumndcscmdcPortbindingPortNameread-onlycurrentDcscm destination control multicast,The Port index of rule
1.3.6.1.4.1.259.8.1.2.100.20.5.1.2ColumndcscmdcPortbindingAclNumberread-writecurrentDcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port
1.3.6.1.4.1.259.8.1.2.100.20.6ScalardcscmscEnableread-writecurrentdcscm source control multicast is disable or enable
1.3.6.1.4.1.259.8.1.2.100.20.7NodedcscmscAcl
1.3.6.1.4.1.259.8.1.2.100.20.7.1ScalardcscmscAclNumberread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.20.7.2ScalardcscmscAclSourceIpread-writecurrentSource ip address of acl entry
1.3.6.1.4.1.259.8.1.2.100.20.7.3ScalardcscmscAclSourceMaskread-writecurrentSource Mask of acl entry
1.3.6.1.4.1.259.8.1.2.100.20.7.4ScalardcscmscAclDestinationIpread-writecurrentDestination ip address of acl entry, the destination ip must be a valid multicast group address.
1.3.6.1.4.1.259.8.1.2.100.20.7.5ScalardcscmscAclDestinationMaskread-writecurrentDestination Mask of acl entry, the destination mask should meet the request of muticast group address.
1.3.6.1.4.1.259.8.1.2.100.20.7.6ScalardcscmscAclPermitOrDenyread-writecurrentacl entry permit or deny;0:deny; 1:permit; 2:del this acl
1.3.6.1.4.1.259.8.1.2.100.20.8TabledcscmscPortbindingTablenot-accessiblecurrentdcscm destination control multicast, Acl is binded to Port
1.3.6.1.4.1.259.8.1.2.100.20.8.1RowdcscmscPortbindingEntrynot-accessiblecurrentThe index of this table is PortName
1.3.6.1.4.1.259.8.1.2.100.20.8.1.1ColumndcscmscPortbindingPortNameread-onlycurrentDcscm source control multicast,The Port Number of rule
1.3.6.1.4.1.259.8.1.2.100.20.8.1.2ColumndcscmscPortbindingAclNumberread-writecurrentDcscm source control multicast,The Acl number of rule ; 0 means to del the rule binded to port
1.3.6.1.4.1.259.8.1.2.100.20.9TabledcscmpcTablenot-accessiblecurrentdcscm policy multicast table
1.3.6.1.4.1.259.8.1.2.100.20.9.1RowdcscmpcEntrynot-accessiblecurrentThe index of this table is dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen
1.3.6.1.4.1.259.8.1.2.100.20.9.1.1ColumndcscmpcSourceIpread-onlycurrentsource ip address of policy multicast
1.3.6.1.4.1.259.8.1.2.100.20.9.1.2ColumndcscmpcSourceMasklenread-onlycurrentMask length of source Ip
1.3.6.1.4.1.259.8.1.2.100.20.9.1.3ColumndcscmpcDestinationIpread-onlycurrentDestination ip address of policy multicast,the destination ip must be a valid multicast group address.
1.3.6.1.4.1.259.8.1.2.100.20.9.1.4ColumndcscmpcDestinationMasklenread-onlycurrentMask length of destination Ip
1.3.6.1.4.1.259.8.1.2.100.20.9.1.5Columndcscmpccosread-writecurrentcos value of policy multicast; between 0 and 7 ;8 means to del the policy
1.3.6.1.4.1.259.8.1.2.100.21Nodedcscm6
1.3.6.1.4.1.259.8.1.2.100.21.1Scalardcscm6dcEnableread-writecurrentdcscm6 destination control multicast is disable or enable
1.3.6.1.4.1.259.8.1.2.100.21.2Nodedcscm6dcAcl
1.3.6.1.4.1.259.8.1.2.100.21.2.1Scalardcscm6dcAclNumberread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.21.2.2Scalardcscm6dcAclSourceIpread-writecurrentSource ip address of acl entry
1.3.6.1.4.1.259.8.1.2.100.21.2.3Scalardcscm6dcAclSourceMaskread-writecurrentSource MaskLen of acl entry
1.3.6.1.4.1.259.8.1.2.100.21.2.4Scalardcscm6dcAclDestinationIpread-writecurrentDestination ip address of acl entry,the destination ip must be a valid multicast group address.
1.3.6.1.4.1.259.8.1.2.100.21.2.5Scalardcscm6dcAclDestinationMaskread-writecurrentDestination MaskLen of acl entry ,the mask length should meet the request of multicast group address.
1.3.6.1.4.1.259.8.1.2.100.21.2.6Scalardcscm6dcAclPermitOrDenyread-writecurrentacl entry permit or deny; 0:deny; 1:permit; 2:del this acl
1.3.6.1.4.1.259.8.1.2.100.21.3Tabledcscm6VMacbindingTablenot-accessiblecurrentdcscm6 destination control multicast, Acl is binded to VMac
1.3.6.1.4.1.259.8.1.2.100.21.3.1Rowdcscm6VMacbindingEntrynot-accessiblecurrentThe index of this table is Vlanid,MacAddress
1.3.6.1.4.1.259.8.1.2.100.21.3.1.1Columndcscm6VMacbindingVlanidread-onlycurrentDcscm6 destination control multicast,The vlanid of rule
1.3.6.1.4.1.259.8.1.2.100.21.3.1.2Columndcscm6VMacbindingMacAddrread-onlycurrentDcscm6 destination control multicast,The Mac Address of rule
1.3.6.1.4.1.259.8.1.2.100.21.3.1.3Columndcscm6VMacbindingAclNumberread-writecurrentDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to vmac
1.3.6.1.4.1.259.8.1.2.100.21.4Tabledcscm6SipbindingTablenot-accessiblecurrentdcscm6 destination control multicast, Acl is binded to Sip
1.3.6.1.4.1.259.8.1.2.100.21.4.1Rowdcscm6SipbindingEntrynot-accessiblecurrentThe index of this table is Sourceip,SourceMaskLen
1.3.6.1.4.1.259.8.1.2.100.21.4.1.1Columndcscm6SipbindingSipAddressread-onlycurrentDcscm6 destination control multicast,The Source ip of rule
1.3.6.1.4.1.259.8.1.2.100.21.4.1.2Columndcscm6SipbindingSipMaskLenread-onlycurrentDcscm6 destination control multicast,The Source ip mask len of rule
1.3.6.1.4.1.259.8.1.2.100.21.4.1.3Columndcscm6SipbindingAclNumberread-writecurrentDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to sip
1.3.6.1.4.1.259.8.1.2.100.21.5Tabledcscm6dcPortbindingTablenot-accessiblecurrentdcscm6 destination control multicast, Acl is binded to Port
1.3.6.1.4.1.259.8.1.2.100.21.5.1Rowdcscm6dcPortbindingEntrynot-accessiblecurrentThe index of this table is PortName
1.3.6.1.4.1.259.8.1.2.100.21.5.1.1Columndcscm6dcPortbindingPortNameread-onlycurrentDcscm6 destination control multicast,The Port Number of rule
1.3.6.1.4.1.259.8.1.2.100.21.5.1.2Columndcscm6dcPortbindingAclNumberread-writecurrentDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to port
1.3.6.1.4.1.259.8.1.2.100.21.6Scalardcscm6scEnableread-writecurrentdcscm6 source control multicast is disable or enable
1.3.6.1.4.1.259.8.1.2.100.21.7Nodedcscm6scAcl
1.3.6.1.4.1.259.8.1.2.100.21.7.1Scalardcscm6scAclNumberread-writecurrent
1.3.6.1.4.1.259.8.1.2.100.21.7.2Scalardcscm6scAclSourceIpread-writecurrentSource ip address of acl entry
1.3.6.1.4.1.259.8.1.2.100.21.7.3Scalardcscm6scAclSourceMaskread-writecurrentSource MaskLen of acl entry
1.3.6.1.4.1.259.8.1.2.100.21.7.4Scalardcscm6scAclDestinationIpread-writecurrentDestination ip address of acl entry,the destination ip must be a valid multicast group address.
1.3.6.1.4.1.259.8.1.2.100.21.7.5Scalardcscm6scAclDestinationMaskread-writecurrentDestination MaskLen of acl entry ,the mask length should meet the request of multicast group address.
1.3.6.1.4.1.259.8.1.2.100.21.7.6Scalardcscm6scAclPermitOrDenyread-writecurrentacl entry permit or deny; 0:deny; 1:permit; 2:del this acl
1.3.6.1.4.1.259.8.1.2.100.21.8Tabledcscm6scPortbindingTablenot-accessiblecurrentdcscm6 destination control multicast, Acl is binded to Port
1.3.6.1.4.1.259.8.1.2.100.21.8.1Rowdcscm6scPortbindingEntrynot-accessiblecurrentThe index of this table is PortName
1.3.6.1.4.1.259.8.1.2.100.21.8.1.1Columndcscm6scPortbindingPortNameread-onlycurrentDcscm6 source control multicast,The Port Number of rule
1.3.6.1.4.1.259.8.1.2.100.21.8.1.2Columndcscm6scPortbindingAclNumberread-writecurrentDcscm6 source control multicast,The Acl number of rule,0 means to del the rule binded to port
1.3.6.1.4.1.259.8.1.2.100.21.9Tabledcscm6pcTablenot-accessiblecurrentdcscm6 policy multicast table
1.3.6.1.4.1.259.8.1.2.100.21.9.1Rowdcscm6pcEntrynot-accessiblecurrentThe index of this table is dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask
1.3.6.1.4.1.259.8.1.2.100.21.9.1.1Columndcscm6pcSourceIpread-onlycurrentsource ip address of policy multicast
1.3.6.1.4.1.259.8.1.2.100.21.9.1.2Columndcscm6pcSourceMaskread-onlycurrentSource MaskLen of policy multicast
1.3.6.1.4.1.259.8.1.2.100.21.9.1.3Columndcscm6pcDestinationIpread-onlycurrentDestination ip address of policy multicast
1.3.6.1.4.1.259.8.1.2.100.21.9.1.4Columndcscm6pcDestinationMaskread-onlycurrentDestination MaskLen of policy multicast
1.3.6.1.4.1.259.8.1.2.100.21.9.1.5Columndcscm6pccosread-writecurrentcos value of policy multicast; between 0 and 7 ;8 means to del the policy
1.3.6.1.4.1.259.8.1.2.100.22NodeprClusterv2
1.3.6.1.4.1.259.8.1.2.100.22.1Nodeclusterv2Base
1.3.6.1.4.1.259.8.1.2.100.22.1.1Scalarclusterv2BaseKeyread-writecurrentcluster run switch,set the key word only while the cluster is not running and you should set it with set clusterv2BaseRun.
1.3.6.1.4.1.259.8.1.2.100.22.1.2Scalarclusterv2BaseVlanread-writecurrentcluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not…
1.3.6.1.4.1.259.8.1.2.100.22.1.3Scalarclusterv2BaseRunread-writecurrentcluster run switch,set the key word and vlan id or stop the cluster.
1.3.6.1.4.1.259.8.1.2.100.22.1.4Scalarclusterv2BaseRoleread-onlycurrentThe role of the device. none means cluster device isn't running.
1.3.6.1.4.1.259.8.1.2.100.22.1.5Scalarclusterv2BaseVersionread-onlycurrentversion of cluster.
1.3.6.1.4.1.259.8.1.2.100.22.1.6Scalarclusterv2BaseMaxNumberOfMembersread-onlycurrentThe maximum number of cluster members allowed in the cluster. The command switch is considered as a cluster member also.
1.3.6.1.4.1.259.8.1.2.100.22.1.7Scalarclusterv2BaseMaxNumberOfSwitchesread-onlycurrentThe maximum number of cluster switches allowed in the cluster. The Candidates include commander,candidate and member.
1.3.6.1.4.1.259.8.1.2.100.22.2Nodeclusterv2Create
1.3.6.1.4.1.259.8.1.2.100.22.2.1Scalarclusterv2CreateIPPoolread-writecurrentip pool.Valid cluster ip-pool format like as 10.x.x.x,default is 10.254.254.1 . if get result is 0 that the cluser is not running! set it only on the device is…
1.3.6.1.4.1.259.8.1.2.100.22.2.2Scalarclusterv2CreateNameread-writecurrentcreate the clustername while create the cluster commander, set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate.
1.3.6.1.4.1.259.8.1.2.100.22.2.3Scalarclusterv2CreateCmdrOperateread-writecurrentif set create ,operation is to build cluster according to clusterv2CreateClusterIPPool/clusterv2StatusClusterName. if set destroy , operation is try to clear t…
1.3.6.1.4.1.259.8.1.2.100.22.3Nodeclusterv2Status
1.3.6.1.4.1.259.8.1.2.100.22.3.1Scalarclusterv2StatusClusterNameread-writecurrentThe name of the cluster.Set only on the device is not commander.The default is NULL.
1.3.6.1.4.1.259.8.1.2.100.22.3.2Scalarclusterv2StatusKeepaliveread-writecurrentcluster keepalive interval(3-30 second). if get result is 0 that the cluser is not running!
1.3.6.1.4.1.259.8.1.2.100.22.3.3Scalarclusterv2StatusLoss-countread-writecurrentcluster the max(1-10) loss-count packet during the keeplive interval. if get result is 0 that the cluser is not running!
1.3.6.1.4.1.259.8.1.2.100.22.4Nodeclusterv2Commander
1.3.6.1.4.1.259.8.1.2.100.22.4.1Scalarclusterv2CommanderAutoAddMemread-writecurrentauto add mem switch
1.3.6.1.4.1.259.8.1.2.100.22.4.2Scalarclusterv2MemberCounterread-onlycurrentmember number on commander,read only on commander or will return 65535.
1.3.6.1.4.1.259.8.1.2.100.22.4.3Tableclusterv2MemberTablenot-accessiblecurrentThis table contains one row per cluster member, including the command switch,read only on commander.
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1Rowclusterv2MemberEntrynot-accessiblecurrentAn entry containing cluster management information applicable to a particular cluster member.
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.1Columnclusterv2MemberNumberread-onlycurrentAn arbitrary value which uniquely identifies the cluster member switch number. It ranges from 1 to clusterv2StatusMaxNumberOfMembers,read only on commander.
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.2Columnclusterv2MemberIpAddressread-onlycurrentThe management ip address of the member device.
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.3Columnclusterv2MemberOperStatusread-onlycurrentThe status of cluster management connectivity between the command switch and a cluster member. Cluster management connectivity is determined by the exchange of…
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.4Columnclusterv2MemberMacAddressread-onlycurrentThe management MAC address of the member device.
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.5Columnclusterv2MemberHostNameread-onlycurrent
1.3.6.1.4.1.259.8.1.2.100.22.4.3.1.6Columnclusterv2MemberDeviceTyperead-onlycurrentdeviceType such as 5526S, 2008A etc
1.3.6.1.4.1.259.8.1.2.100.22.4.4Scalarclusterv2CandidateCounterread-onlycurrentcandidate number on commander,read only on commander or will return 65535.
1.3.6.1.4.1.259.8.1.2.100.22.4.5Tableclusterv2CandidateTablenot-accessiblecurrentThis table contains one row per cluster candidate, A cluster candidate is a device that is currently eligible to be added to the cluster of a command switch. A…
1.3.6.1.4.1.259.8.1.2.100.22.4.5.1Rowclusterv2CandidateEntrynot-accessiblecurrentAn entry pertaining to a single candidate device.
1.3.6.1.4.1.259.8.1.2.100.22.4.5.1.1Columnclusterv2CandidateIdread-onlycurrentThe candidate id.
1.3.6.1.4.1.259.8.1.2.100.22.4.5.1.2Columnclusterv2CandidateMacAddressread-onlycurrentThe MAC address of a device qualified to to be a cluster member of the command switch cluster.
1.3.6.1.4.1.259.8.1.2.100.22.4.5.1.3Columnclusterv2CandidateHostNameread-onlycurrent
1.3.6.1.4.1.259.8.1.2.100.22.4.5.1.4Columnclusterv2CandidateDeviceTyperead-onlycurrent
1.3.6.1.4.1.259.8.1.2.100.22.4.6Scalarclusterv2RebootMemread-writecurrentOperation is to reboot the specified member.you can select more member one time, the value connected with '-' or ';',the string len is 1-30 .set only on comman…
1.3.6.1.4.1.259.8.1.2.100.23Nodedns
1.3.6.1.4.1.259.8.1.2.100.23.1ScalardnsEnableread-writecurrentEnable or disable dns dynamic domain resolving.
1.3.6.1.4.1.259.8.1.2.100.23.2TablednsServerTablenot-accessiblecurrentThe dns server list table which consists of a sequence of 'dnsServerEntry' items which describe the configured dns server IP information.
1.3.6.1.4.1.259.8.1.2.100.23.2.1RowdnsServerEntrynot-accessiblecurrentAn entry in the dnsServerTable containing the dns server IP.
1.3.6.1.4.1.259.8.1.2.100.23.2.1.1ColumndnsServerInetAddrTypenot-accessiblecurrentThe IP address type of dnsServerEntry. This value applies to dnsServerIpAddr.
1.3.6.1.4.1.259.8.1.2.100.23.2.1.2ColumndnsServerIpAddrread-onlycurrentThe dns server IP address with 'dnsServerInetAddrType' to indicate the IP address type(IPv4 or IPv6).
1.3.6.1.4.1.259.8.1.2.100.23.2.1.3ColumndnsServerPriorityread-createcurrentCurrent Priority of the dns server.
1.3.6.1.4.1.259.8.1.2.100.23.2.1.4ColumndnsServerStatusread-createcurrentCurrent state of the dns server.
1.3.6.1.4.1.259.8.1.2.100.23.3TablednsDomainSuffixTablenot-accessiblecurrentThe dns domain suffix table which consists of a sequence of 'dnsDomainSuffixEntry' items which describe the configured dns domain suffix information.
1.3.6.1.4.1.259.8.1.2.100.23.3.1RowdnsDomainSuffixEntrynot-accessiblecurrentAn entry in the dnsDomainSuffixTable containing the dns domain suffix.
1.3.6.1.4.1.259.8.1.2.100.23.3.1.1ColumndnsDomainSuffixread-onlycurrentThe dns domain suffix(e.g. commpany.com).
1.3.6.1.4.1.259.8.1.2.100.23.3.1.2ColumndnsDomainSuffixStatusread-createcurrentCurrent state of the dns domain suffix.
1.3.6.1.4.1.259.8.1.2.100.23.4TablednsDynHostTablenot-accessiblecurrentThe dns dynamic host table which consists of a sequence of 'dnsDynHostEntry' items which describe the resolved dns dynamic host information.
1.3.6.1.4.1.259.8.1.2.100.23.4.1RowdnsDynHostEntrynot-accessiblecurrentAn entry in the dnsDynHostTable containing the dns dynamic host information.
1.3.6.1.4.1.259.8.1.2.100.23.4.1.1ColumndnsDynHostIndexnot-accessiblecurrentIndex of position in the cache
1.3.6.1.4.1.259.8.1.2.100.23.4.1.2ColumndnsDynHostNameread-onlycurrentThe dns dynamic host name(e.g. www.sina.com.cn).
1.3.6.1.4.1.259.8.1.2.100.23.4.1.3ColumndnsDynHostIpAddrread-onlycurrentThe dns dynamic host's IP address with 'dnsDynHostInetAddrType' to indicate the IP address type(IPv4 or IPv6).
1.3.6.1.4.1.259.8.1.2.100.23.4.1.4ColumndnsDynHostTtlread-onlycurrentThe dns dynamic host's living time(seconds).
1.3.6.1.4.1.259.8.1.2.100.24NodelldpMIB
1.3.6.1.4.1.259.8.1.2.100.24.0NodelldpNotifications
1.3.6.1.4.1.259.8.1.2.100.24.0.0NodelldpNotificationPrefix
1.3.6.1.4.1.259.8.1.2.100.24.0.0.1NotificationlldpRemTablesChangecurrentA lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote syste…
1.3.6.1.4.1.259.8.1.2.100.24.1NodelldpObjects
1.3.6.1.4.1.259.8.1.2.100.24.1.1NodelldpConfiguration
1.3.6.1.4.1.259.8.1.2.100.24.1.1.1ScalarlldpMessageTxIntervalread-writecurrentThe interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of …
1.3.6.1.4.1.259.8.1.2.100.24.1.1.2ScalarlldpMessageTxHoldMultiplierread-writecurrentThe time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.4ScalarlldpTxDelayread-writecurrentThe lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local syste…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.5ScalarlldpNotificationIntervalread-writecurrentThis object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated …
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6TablelldpPortConfigTablenot-accessiblecurrentThe table that controls LLDP frame transmission on individual ports.
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6.1RowlldpPortConfigEntrynot-accessiblecurrentLLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports wh…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6.1.1ColumnlldpPortConfigPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6.1.2ColumnlldpPortConfigAdminStatusread-writecurrentThe administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent wil…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6.1.3ColumnlldpPortConfigNotificationEnableread-writecurrentThe lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notif…
1.3.6.1.4.1.259.8.1.2.100.24.1.1.6.1.4ColumnlldpPortConfigTLVsTxEnableread-writecurrentThe value '1' indicates that LLDP agent should transmit 'Port Description TLV'. The value '2' indicates that LLDP agent should transmit 'System Name TLV'. The …
1.3.6.1.4.1.259.8.1.2.100.24.1.2NodelldpStatistics
1.3.6.1.4.1.259.8.1.2.100.24.1.2.1ScalarlldpStatsRemTablesLastChangeTimeread-onlycurrentThe value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteS…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.2ScalarlldpStatsRemTablesInsertsread-onlycurrentThe number of times an entry has been inserted into tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with rem…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.3ScalarlldpStatsRemTablesDeletesread-onlycurrentThe number of times an entry has been deleted from tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remo…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.4ScalarlldpStatsRemTablesDropsread-onlycurrentThe number of times a new entry could not be created in the tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated …
1.3.6.1.4.1.259.8.1.2.100.24.1.2.5ScalarlldpStatsRemTablesAgeoutsread-onlycurrentThe number of times an entry has been deleted from tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remo…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6TablelldpStatsPortTablenot-accessiblecurrentA table containing LLDP statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disa…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1RowlldpStatsPortEntrynot-accessiblecurrentLLDP frame statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular entry shall b…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.1ColumnlldpStatsPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.2ColumnlldpStatsPortFramesDiscardedTotalread-onlycurrentThe number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD…
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.3ColumnlldpStatsPortFramesInErrorsread-onlycurrentThe number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.4ColumnlldpStatsPortFramesInTotalread-onlycurrentThe number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.5ColumnlldpStatsPortFramesOutTotalread-onlycurrentThe number of LLDP frames transmitted by this LLDP agent on the indicated port.
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.6ColumnlldpStatsPortTLVsDiscardedTotalread-onlycurrentThe number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.7ColumnlldpStatsPortTLVsUnrecognizedTotalread-onlycurrentThe number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the …
1.3.6.1.4.1.259.8.1.2.100.24.1.2.6.1.9ColumnlldpStatsPortAgeoutsread-onlycurrentThe counter that represents the number of age-outs occurred on a given port. An age-out is referred to as the number of times an entry has been deleted from ta…
1.3.6.1.4.1.259.8.1.2.100.24.1.3NodelldpLocalSystemData
1.3.6.1.4.1.259.8.1.2.100.24.1.3.1ScalarlldpLocChassisTyperead-onlycurrentThe type of encoding used to identify the chassis associated with the local system.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.2ScalarlldpLocChassisIdread-onlycurrentThe string value used to identify the chassis component associated with the local system.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.3ScalarlldpLocSysNameread-onlycurrentThe string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same va…
1.3.6.1.4.1.259.8.1.2.100.24.1.3.4ScalarlldpLocSysDescread-onlycurrentThe string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the …
1.3.6.1.4.1.259.8.1.2.100.24.1.3.5ScalarlldpLocSysCapSupportedread-onlycurrentThe bitmap value used to identify which system capabilities are supported on the local system.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.6ScalarlldpLocSysCapEnabledread-onlycurrentThe bitmap value used to identify which system capabilities are enabled on the local system.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7TablelldpLocPortTablenot-accessiblecurrentThis table contains one or more rows per port information associated with the local system known to this agent.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7.1RowlldpLocPortEntrynot-accessiblecurrentInformation about a particular port component. Entries may be created and deleted in this table by the agent.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7.1.1ColumnlldpLocPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7.1.2ColumnlldpLocPortSubtyperead-onlycurrentThe type of port identifier encoding used in the associated 'lldpLocPortId' object.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7.1.3ColumnlldpLocPortIdread-onlycurrentThe string value used to identify the port component associated with a given port in the local system.
1.3.6.1.4.1.259.8.1.2.100.24.1.3.7.1.4ColumnlldpLocPortDescread-onlycurrentThe string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPo…
1.3.6.1.4.1.259.8.1.2.100.24.1.4NodelldpRemoteSystemsData
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1TablelldpRemTablenot-accessiblecurrentThis table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present fo…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1RowlldpRemEntrynot-accessiblecurrentInformation about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery pro…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.1ColumnlldpRemLocalPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum id…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.2ColumnlldpRemIndexnot-accessiblecurrentThis object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.3ColumnlldpRemChassisIdSubtyperead-onlycurrentThe type of encoding used to identify the chassis associated with the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.4ColumnlldpRemChassisIdread-onlycurrentThe string value used to identify the chassis component associated with the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.5ColumnlldpRemPortIdSubtyperead-onlycurrentThe type of port identifier encoding used in the associated 'lldpRemPortId' object.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.6ColumnlldpRemPortIdread-onlycurrentThe string value used to identify the port component associated with the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.7ColumnlldpRemPortDescread-onlycurrentThe string value used to identify the description of the given port associated with the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.8ColumnlldpRemSysNameread-onlycurrentThe string value used to identify the system name of the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.9ColumnlldpRemSysDescread-onlycurrentThe string value used to identify the system description of the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.10ColumnlldpRemSysCapSupportedread-onlycurrentThe bitmap value used to identify which system capabilities are supported on the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.11ColumnlldpRemSysCapEnabledread-onlycurrentThe bitmap value used to identify which system capabilities are enabled on the remote system.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.1.1.12ColumnlldpRemTimeMarkread-onlycurrentA TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to …
1.3.6.1.4.1.259.8.1.2.100.24.1.4.3TablelldpRemUnknownTLVTablenot-accessiblecurrentThis table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic man…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.3.1RowlldpRemUnknownTLVEntrynot-accessiblecurrentInformation about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical…
1.3.6.1.4.1.259.8.1.2.100.24.1.4.3.1.1ColumnlldpRemUnknownTLVTypenot-accessiblecurrentThis object represents the value extracted from the type field of the TLV.
1.3.6.1.4.1.259.8.1.2.100.24.1.4.3.1.2ColumnlldpRemUnknownTLVInforead-onlycurrentThis object represents the value extracted from the value field of the TLV.
1.3.6.1.4.1.259.8.1.2.100.24.1.5NodelldpExtensions
1.3.6.1.4.1.259.8.1.2.100.24.2NodelldpConformance
1.3.6.1.4.1.259.8.1.2.100.24.2.1NodelldpCompliances
1.3.6.1.4.1.259.8.1.2.100.24.2.1.1CompliancelldpCompliancecurrentThe compliance statement for SNMP entities which implement the LLDP MIB.
1.3.6.1.4.1.259.8.1.2.100.24.2.2NodelldpGroups
1.3.6.1.4.1.259.8.1.2.100.24.2.2.1GrouplldpConfigGroupcurrentThe collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.
1.3.6.1.4.1.259.8.1.2.100.24.2.2.2GrouplldpStatsGroupcurrentThe collection of objects which are used to represent LLDP statistics. This group is mandatory for agents which implement the LLDP.
1.3.6.1.4.1.259.8.1.2.100.24.2.2.3GrouplldpLocSysGroupcurrentThe collection of objects which are used to represent LLDP Local System Information. The objects represent the information associated with the mandatory TLVs. …
1.3.6.1.4.1.259.8.1.2.100.24.2.2.4GrouplldpOptLocSysGroupcurrentThe collection of objects which are used to represent optional LLDP Local System Information. The objects represent the information associated with the optiona…
1.3.6.1.4.1.259.8.1.2.100.24.2.2.5GrouplldpRemSysGroupcurrentThe collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set.…
1.3.6.1.4.1.259.8.1.2.100.24.2.2.6GrouplldpNotificationsGroupcurrentThe collection of notifications used to indicate LLDP MIB data consistency and general status information. This group is mandatory for agents which implement t…
1.3.6.1.4.1.259.8.1.2.100.25NodentpSnmpMIB
1.3.6.1.4.1.259.8.1.2.100.25.1NodentpSnmpMIBObjects
1.3.6.1.4.1.259.8.1.2.100.25.1.1NodentpEntInfo
1.3.6.1.4.1.259.8.1.2.100.25.1.1.1ScalarntpEntSoftwareNameread-onlycurrentThe product name of the installed NTP version.
1.3.6.1.4.1.259.8.1.2.100.25.1.1.2ScalarntpEntSoftwareVersionread-onlycurrentThe software version of the installed NTP implementation.
1.3.6.1.4.1.259.8.1.2.100.25.1.1.4ScalarntpEntSoftwareVendorread-onlycurrentThe vendor/author of the installed NTP version.
1.3.6.1.4.1.259.8.1.2.100.25.1.1.5ScalarntpEntSystemTyperead-onlycurrentGeneral hardware/os platform information.
1.3.6.1.4.1.259.8.1.2.100.25.1.1.6ScalarntpEntTimeResolutionread-onlycurrentA string describing the time resolution of the running NTP implementation.
1.3.6.1.4.1.259.8.1.2.100.25.1.1.9ScalarntpEntTimePrecisionread-onlycurrentThe entity's precision in integer format.
1.3.6.1.4.1.259.8.1.2.100.25.1.2NodentpEntStatus
1.3.6.1.4.1.259.8.1.2.100.25.1.2.1ScalarntpEntStatusCurrentModeread-onlycurrentThe actual mode of NTP as a string
1.3.6.1.4.1.259.8.1.2.100.25.1.2.2ScalarntpEntStatusCurrentModeValread-onlycurrentThe current mode of the NTP as integer value.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.3ScalarntpEntStatusStratumread-onlycurrentThe NTP entity's own stratum value.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.4ScalarntpEntStatusActiveRefSourceIdread-onlycurrentThe association ID of the current syspeer.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.5ScalarntpEntStatusActiveRefSourceNameread-onlycurrentThe hostname/descriptive name of the current reference source selected as syspeer.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.7ScalarntpEntStatusNumberOfRefSourcesread-onlycurrentThe number of reference sources configured for NTP.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.10ScalarntpEntStatusDateTimeread-onlycurrent
1.3.6.1.4.1.259.8.1.2.100.25.1.2.13ScalarntpEntStatusInPktsread-onlycurrentThe total number of NTP messages delivered to the NTP entity from the transport service.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.14ScalarntpEntStatusOutPktsread-onlycurrentThe total number of NTP messages delivered to the transport service by this NTP entity.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.15ScalarntpEntStatusBadVersionread-onlycurrentThe total number of NTP messages which were delivered to this NTP entity and were for an unsupported NTP version.
1.3.6.1.4.1.259.8.1.2.100.25.1.2.16ScalarntpEntStatusProtocolErrorread-onlycurrentThe total number of NTP messages which were delivered to this NTP entity and this entity was not able to process due to an NTP protocol error.
1.3.6.1.4.1.259.8.1.2.100.25.6NodentpEntConformance
1.3.6.1.4.1.259.8.1.2.100.25.6.1NodentpEntCompliances
1.3.6.1.4.1.259.8.1.2.100.25.6.1.1CompliancentpEntNTPCompliancecurrentThe compliance statement for SNMP entities which use NTP and implement the NTP MIB
1.3.6.1.4.1.259.8.1.2.100.25.6.1.2CompliancentpEntSNTPCompliancecurrentThe compliance statement for SNMP entities which use SNTP and implement the NTP MIB
1.3.6.1.4.1.259.8.1.2.100.25.6.2NodentpEntGroups
1.3.6.1.4.1.259.8.1.2.100.25.6.2.1GroupntpEntObjectsGroup1currentA collection of objects for the NTP MIB that all NTP or SNTP entities should implement.
1.3.6.1.4.1.259.8.1.2.100.25.6.2.2GroupntpEntObjectsGroup2currentA collection of objects for the NTP MIB that are optional for NTP or SNTP entities to implement.
1.3.6.1.4.1.259.8.1.2.100.26NodepriPoeConfig
1.3.6.1.4.1.259.8.1.2.100.26.1ScalarpoeSystemEnableread-writecurrentThe power inline global switch. Enable expresses it is turned on, while disable indicates that off.
1.3.6.1.4.1.259.8.1.2.100.26.2ScalarpoeMaxPowerread-writecurrentThe power inline global available power whitch cannot be exceeded by the total power of all PDs.
1.3.6.1.4.1.259.8.1.2.100.26.3ScalarpoePoliceEnableread-writecurrentThe power inline power mamagement switch. Enable expresses it is in priority-policy mode, while disable indicates that in first-in-first-get mode.
1.3.6.1.4.1.259.8.1.2.100.26.4ScalarpoeLegacyEnableread-writecurrentThe power inline nonstandard PD detect switch. Enable expresses nonstandard PD can be detected, while disable indicates that cannot be detected.
1.3.6.1.4.1.259.8.1.2.100.26.5ScalarpoeDisconnectread-onlycurrentThe power inline disconnection mode.
1.3.6.1.4.1.259.8.1.2.100.26.6ScalarpoeCurrentPowerread-onlycurrentThe power inline current export power. It is a real time value.
1.3.6.1.4.1.259.8.1.2.100.26.7ScalarpoePortModeread-onlycurrentThe power inline power supply mode.
1.3.6.1.4.1.259.8.1.2.100.26.8ScalarpoeSoftwareVersionread-onlycurrentThe power inline software version.
1.3.6.1.4.1.259.8.1.2.100.26.9ScalarpoeHardwareVersionread-onlycurrentThe power inline hardware version.
1.3.6.1.4.1.259.8.1.2.100.26.10TablepoePortConfigTablenot-accessiblecurrentThe power inline port configuration table
1.3.6.1.4.1.259.8.1.2.100.26.10.1RowpoePortConfigEntrynot-accessiblecurrentThe power inline configuration in port.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.1ColumnpoePortIndexnot-accessiblecurrentThe power inline port index.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.2ColumnpoePortStatusread-writecurrentThe power inline port switch. Enable expresses it is turned on, while disable indicates that off.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.3ColumnpoePortPriorityread-writecurrentThe power inline port priority.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.4ColumnpoePortMaxPowerread-writecurrentThe power inline port available power whitch cannot be exceeded by the connected PD.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.5ColumnpoePortCurrentPowerread-onlycurrentThe power inline port used power. It is a real time value.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.6ColumnpoePortCurrentCurrentread-onlycurrentThe power inline port export current. It is a real time value.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.7ColumnpoePortCurrentVoltageread-onlycurrentThe power inline port export voltage. It is a real time value.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.8ColumnpoePortPdStatusread-onlycurrentThe power inline detect status. on(1):PD is connected and natural powered, off(2):PD is not connected, faulty(3):error, deny(4):power is low or high.
1.3.6.1.4.1.259.8.1.2.100.26.10.1.9ColumnpoePortPdClassread-onlycurrentThe connected PD class of power inline
1.3.6.1.4.1.259.8.1.2.100.27NodepriQos2
1.3.6.1.4.1.259.8.1.2.100.27.1Nodeqos2
1.3.6.1.4.1.259.8.1.2.100.27.1.1Nodeqos2MapCostoIntp
1.3.6.1.4.1.259.8.1.2.100.27.1.1.1Scalarqos2MapCostoIntp1read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.2Scalarqos2MapCostoIntp2read-createcurrentCOS to IntPrio map,IntPrio2<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.3Scalarqos2MapCostoIntp3read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.4Scalarqos2MapCostoIntp4read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.5Scalarqos2MapCostoIntp5read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.6Scalarqos2MapCostoIntp6read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.7Scalarqos2MapCostoIntp7read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.8Scalarqos2MapCostoIntp8read-createcurrentCOS to IntPrio map,IntPrio1<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.1.9Scalarqos2MapCostoIntpStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.2Nodeqos2MapCostoDP
1.3.6.1.4.1.259.8.1.2.100.27.1.2.1Scalarqos2MapCostoDP1read-createcurrentCOS to drop precedence map,Drop Precedence1<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.2Scalarqos2MapCostoDP2read-createcurrentCOS to drop precedence map,Drop Precedence2<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.3Scalarqos2MapCostoDP3read-createcurrentCOS to drop precedence map,Drop Precedence3<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.4Scalarqos2MapCostoDP4read-createcurrentCOS to drop precedence map,Drop Precedence4<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.5Scalarqos2MapCostoDP5read-createcurrentCOS to drop precedence map,Drop Precedence5<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.6Scalarqos2MapCostoDP6read-createcurrentCOS to drop precedence map,Drop Precedence6<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.7Scalarqos2MapCostoDP7read-createcurrentCOS to drop precedence map,Drop Precedence7<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.8Scalarqos2MapCostoDP8read-createcurrentCOS to drop precedence map,Drop Precedence8<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.2.9Scalarqos2MapCostoDPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.3Nodeqos2MapDSCPtoDSCP
1.3.6.1.4.1.259.8.1.2.100.27.1.3.1Scalarqos2MapDSCPtoDSCP1read-createcurrentDSCP to DSCP map, DSCP1<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.2Scalarqos2MapDSCPtoDSCP2read-createcurrentDSCP to DSCP map, DSCP2<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.3Scalarqos2MapDSCPtoDSCP3read-createcurrentDSCP to DSCP map, DSCP3<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.4Scalarqos2MapDSCPtoDSCP4read-createcurrentDSCP to DSCP map, DSCP4<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.5Scalarqos2MapDSCPtoDSCP5read-createcurrentDSCP to DSCP map, DSCP5<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.6Scalarqos2MapDSCPtoDSCP6read-createcurrentDSCP to DSCP map, DSCP6<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.7Scalarqos2MapDSCPtoDSCP7read-createcurrentDSCP to DSCP map, DSCP7<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.8Scalarqos2MapDSCPtoDSCP8read-createcurrentDSCP to DSCP map, DSCP8<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.9Scalarqos2MapDSCPtoDSCPoutDSCPread-createcurrentDSCP to DSCP map, outDSCP<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.3.10Scalarqos2MapDSCPtoDSCPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.4Nodeqos2MapDSCPtoIntp
1.3.6.1.4.1.259.8.1.2.100.27.1.4.1Scalarqos2MapDSCPtoIntp1read-createcurrentDSCP to Intp map, DSCP1<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.2Scalarqos2MapDSCPtoIntp2read-createcurrentDSCP to Intp map, DSCP2<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.3Scalarqos2MapDSCPtoIntp3read-createcurrentDSCP to Intp map, DSCP3<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.4Scalarqos2MapDSCPtoIntp4read-createcurrentDSCP to Intp map, DSCP4<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.5Scalarqos2MapDSCPtoIntp5read-createcurrentDSCP to Intp map, DSCP5<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.6Scalarqos2MapDSCPtoIntp6read-createcurrentDSCP to Intp map, DSCP6<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.7Scalarqos2MapDSCPtoIntp7read-createcurrentDSCP to Intp map, DSCP7<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.8Scalarqos2MapDSCPtoIntp8read-createcurrentDSCP to Intp map, DSCP8<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.9Scalarqos2MapDSCPtoIntpIntPriovalueread-createcurrentDSCP to Intp map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.4.10Scalarqos2MapDSCPtoIntpStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.5Nodeqos2MapDSCPtoDP
1.3.6.1.4.1.259.8.1.2.100.27.1.5.1Scalarqos2MapDSCPtoDP1read-createcurrentDSCP to DP map, DSCP1<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.2Scalarqos2MapDSCPtoDP2read-createcurrentDSCP to DP map, DSCP2<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.3Scalarqos2MapDSCPtoDP3read-createcurrentDSCP to DP map, DSCP3<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.4Scalarqos2MapDSCPtoDP4read-createcurrentDSCP to DP map, DSCP4<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.5Scalarqos2MapDSCPtoDP5read-createcurrentDSCP to DP map, DSCP5<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.6Scalarqos2MapDSCPtoDP6read-createcurrentDSCP to DP map, DSCP6<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.7Scalarqos2MapDSCPtoDP7read-createcurrentDSCP to DP map, DSCP7<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.8Scalarqos2MapDSCPtoDP8read-createcurrentDSCP to DP map, DSCP8<0-63>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.9Scalarqos2MapDSCPtoDPvalueread-createcurrentDSCP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.5.10Scalarqos2MapDSCPtoDPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.6Nodeqos2MapExptoIntp
1.3.6.1.4.1.259.8.1.2.100.27.1.6.1Scalarqos2MapExptoIntp1read-createcurrentEXP to Intp map, IntPrio1 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.2Scalarqos2MapExptoIntp2read-createcurrentEXP to Intp map, IntPrio2 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.3Scalarqos2MapExptoIntp3read-createcurrentEXP to Intp map, IntPrio3 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.4Scalarqos2MapExptoIntp4read-createcurrentEXP to Intp map, IntPrio4 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.5Scalarqos2MapExptoIntp5read-createcurrentEXP to Intp map, IntPrio5 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.6Scalarqos2MapExptoIntp6read-createcurrentEXP to Intp map, IntPrio6 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.7Scalarqos2MapExptoIntp7read-createcurrentEXP to Intp map, IntPrio7 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.8Scalarqos2MapExptoIntp8read-createcurrentEXP to Intp map, IntPrio8 value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.6.9Scalarqos2MapExptoIntpStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.7Nodeqos2MapExptoDP
1.3.6.1.4.1.259.8.1.2.100.27.1.7.1Scalarqos2MapExptoDP1read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.2Scalarqos2MapExptoDP2read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.3Scalarqos2MapExptoDP3read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.4Scalarqos2MapExptoDP4read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.5Scalarqos2MapExptoDP5read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.6Scalarqos2MapExptoDP6read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.7Scalarqos2MapExptoDP7read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.8Scalarqos2MapExptoDP8read-createcurrentEXP to DP map, Drop Precedence value<0-2>.
1.3.6.1.4.1.259.8.1.2.100.27.1.7.9Scalarqos2MapExptoDPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.8Nodeqos2MapIntptoDSCP
1.3.6.1.4.1.259.8.1.2.100.27.1.8.1Scalarqos2MapIntptoDSCP1read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.2Scalarqos2MapIntptoDSCP2read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.3Scalarqos2MapIntptoDSCP3read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.4Scalarqos2MapIntptoDSCP4read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.5Scalarqos2MapIntptoDSCP5read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.6Scalarqos2MapIntptoDSCP6read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.7Scalarqos2MapIntptoDSCP7read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.8Scalarqos2MapIntptoDSCP8read-createcurrentIntp to DSCP map, IntPrio value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.8.9Scalarqos2MapIntptoDSCPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.10Nodeqos2MapIntptoEXP
1.3.6.1.4.1.259.8.1.2.100.27.1.10.1Scalarqos2MapIntptoEXP1read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.2Scalarqos2MapIntptoEXP2read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.3Scalarqos2MapIntptoEXP3read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.4Scalarqos2MapIntptoEXP4read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.5Scalarqos2MapIntptoEXP5read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.6Scalarqos2MapIntptoEXP6read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.7Scalarqos2MapIntptoEXP7read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.8Scalarqos2MapIntptoEXP8read-createcurrentIntp to EXP map, EXP value<0-7>.
1.3.6.1.4.1.259.8.1.2.100.27.1.10.9Scalarqos2MapIntptoEXPStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.11Nodeqos2AggregatePolicy
1.3.6.1.4.1.259.8.1.2.100.27.1.11.1Scalarqos2AggPolicyNameread-createcurrentAggregate policy name<1-64>.
1.3.6.1.4.1.259.8.1.2.100.27.1.11.2Scalarqos2AggPolicyCIRKbpsread-createcurrentCIR(Committed Information Rate) Kbits per second <1-10000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.11.3Scalarqos2AggPolicyCBSKbpsread-createcurrentCBS(Committed Burst Size) Kbits per second <1-1000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.11.4Scalarqos2AggPolicyPBSKbpsread-createcurrentPBS(Peak Burst Size) Kbits per second <1-1000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.11.5Scalarqos2AggPolicyPIRKbpsread-createcurrentPIR(Peak Information Rate) Kbits per second <1-10000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.11.6Scalarqos2AggPolicyConformActionread-createcurrentconform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.7Scalarqos2AggPolicyConformActionChangeValueread-createcurrentIf conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.8Scalarqos2AggPolicyExceedActionread-createcurrentconform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.9Scalarqos2AggPolicyExceedActionChangeValueread-createcurrentIf conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.10Scalarqos2AggPolicyViolateActionread-createcurrentconform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.11Scalarqos2AggPolicyViolateActionChangeValueread-createcurrentIf conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s…
1.3.6.1.4.1.259.8.1.2.100.27.1.11.12Scalarqos2AggPolicyStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.12Tableqos2ServicePolicyTablenot-accessiblecurrentQoS service policy table.
1.3.6.1.4.1.259.8.1.2.100.27.1.12.1Rowqos2ServicePolicyEntrynot-accessiblecurrentQoS service policy table.
1.3.6.1.4.1.259.8.1.2.100.27.1.12.1.1Columnqos2PolicyMapNameread-onlycurrentPolicy map name<1-64>.
1.3.6.1.4.1.259.8.1.2.100.27.1.12.1.2Columnqos2ServicePolicyVlanListread-onlycurrentVlan list.
1.3.6.1.4.1.259.8.1.2.100.27.1.12.1.3Columnqos2ServicePolicyStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.13Nodeqos2PortTable
1.3.6.1.4.1.259.8.1.2.100.27.1.13.1Scalarqos2PortIndexread-createcurrentport Index
1.3.6.1.4.1.259.8.1.2.100.27.1.13.2Scalarqos2PortTyperead-createcurrentthe relation between qosPortType and CLI: 0 mls qos trust {cos |dscp }; 1 mls qos cos {<default-cos>}; 2 service-policy input WORD; 3 mls qos queue {<queue id>…
1.3.6.1.4.1.259.8.1.2.100.27.1.13.3Scalarqos2PortCosread-createcurrentport default cos value
1.3.6.1.4.1.259.8.1.2.100.27.1.13.4Scalarqos2PortTrustread-createcurrentConfigure port trust. cos(0),mls qos trust cos; dscp(1),mls qos trust dscp.
1.3.6.1.4.1.259.8.1.2.100.27.1.13.5Scalarqos2PortPolicyread-createcurrentThe corresponding CLI:service-policy input WORD.
1.3.6.1.4.1.259.8.1.2.100.27.1.13.6Scalarqos2PortQueueBandwidthread-createcurrentThe corresponding CLI:mls qos queue {<queue id>} bandwidth {<MinBandwidth> <MaxBandwidth>}.
1.3.6.1.4.1.259.8.1.2.100.27.1.13.7Scalarqos2PortQueueAlgorithmread-createcurrentThe corresponding CLI:mls qos queue algorithm {sp |wdrr |wrr }.
1.3.6.1.4.1.259.8.1.2.100.27.1.13.8Scalarqos2PortQueueWdrrread-createcurrentThe corresponding CLI:mls qos queue wdrr weight {<Queue1 bandwidth> <Queue2 bandwidth> <Queue3 bandwidth> <Queue4 bandwidth> <Queue5 bandwidth> <Queue6 bandwid…
1.3.6.1.4.1.259.8.1.2.100.27.1.13.9Scalarqos2PortQueueWrrread-createcurrentThe corresponding CLI:mls qos queue wrr weight {<Queue1 weight> <Queue2 weight> <Queue3 weight> <Queue4 weight> <Queue5 weight> <Queue6 weight> <Queue7 weight>…
1.3.6.1.4.1.259.8.1.2.100.27.1.13.10Scalarqos2PortStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.14Nodeqos2ClassMapTable
1.3.6.1.4.1.259.8.1.2.100.27.1.14.1Scalarqos2ClassMapNameread-createcurrentclassmap name
1.3.6.1.4.1.259.8.1.2.100.27.1.14.2Scalarqos2ClassMapTyperead-createcurrent0 class-map <class-map-name>,index is classmapname; 1 match access-group <acl-index-or-name>,need qos2ClassMapAccessGroup cooperation; 2 match ip dscp <dscp-li…
1.3.6.1.4.1.259.8.1.2.100.27.1.14.3Scalarqos2ClassMapAccessGroupread-createcurrentMatch specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.4Scalarqos2ClassMapDscpread-createcurrentMatch specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.5Scalarqos2ClassMapV6Dscpread-createcurrentMatch specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.6Scalarqos2ClassMapIpPreread-createcurrentMatch specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.7Scalarqos2ClassMapV6AccGroupread-createcurrentMatch specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.8Scalarqos2ClassMapV6Flowread-createcurrentMatch specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.9Scalarqos2ClassMapVlanread-createcurrentMatch specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.10Scalarqos2ClassMapCosread-createcurrentMatch specify Cos . This object be configured only if qosClassMapType in the same row is cos(9).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.11Scalarqos2ClassMapExpread-createcurrentMatch specify MPLS EXP. This object be configured only if qosClassMapType in the same row is Exp(10).
1.3.6.1.4.1.259.8.1.2.100.27.1.14.12Scalarqos2ClassMapStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.15Nodeqos2PolicyTable
1.3.6.1.4.1.259.8.1.2.100.27.1.15.1Scalarqos2PolicyNameread-createcurrentQoS Policy name
1.3.6.1.4.1.259.8.1.2.100.27.1.15.2Scalarqos2PolicyClassMapread-createcurrentSpecify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting …
1.3.6.1.4.1.259.8.1.2.100.27.1.15.3Scalarqos2PolicyInsertClassMapread-createcurrentSpecify the position of classmap name.
1.3.6.1.4.1.259.8.1.2.100.27.1.15.4Scalarqos2PolicyTyperead-createcurrentthe relation between qosPolicyType and CLI: 0 policy-map <policy-map-name>; 1 class <class-map-name>; 2 policy <bits_per_second> <normal_burst_bytes> [pir <pea…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.5Scalarqos2PolicyCIRKbpsread-createcurrentCIR(Committed Information Rate) Kbits per second <1-10000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.15.6Scalarqos2PolicyCBSKbpsread-createcurrentCBS(Committed Burst Size) Kbits per second <1-1000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.15.7Scalarqos2PolicyPBSKbpsread-createcurrentPBS(Peak Burst Size) Kbits per second <1-1000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.15.8Scalarqos2PolicyPIRKbpsread-createcurrentPIR(Peak Information Rate) Kbits per second <1-10000000>.
1.3.6.1.4.1.259.8.1.2.100.27.1.15.9Scalarqos2PolicyConformActionChangeread-createcurrenttransmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.10Scalarqos2PolicyConformActionChangeValueread-createcurrentIf action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.11Scalarqos2PolicyExceedActionChangeread-createcurrenttransmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.12Scalarqos2PolicyExceedActionChangeValueread-createcurrentIf action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.13Scalarqos2PolicyViolateActionChangeread-createcurrenttransmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.14Scalarqos2PolicyViolateActionChangeValueread-createcurrentIf action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi…
1.3.6.1.4.1.259.8.1.2.100.27.1.15.15Scalarqos2PolicyAggregatePolicerread-createcurrentaggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3).
1.3.6.1.4.1.259.8.1.2.100.27.1.15.16Scalarqos2PolicyStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.27.1.16Nodeqos2SetTable
1.3.6.1.4.1.259.8.1.2.100.27.1.16.1Scalarqos2SetPolicyMapNameread-createcurrentQoS Policy name.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.2Scalarqos2SetClassMapNameread-createcurrentQoS class map name.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.3Scalarqos2SetTyperead-createcurrentqos2SetType range:1,2,3,4,5,6 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 internal-priority Set internal-priority; 4 drop-prece…
1.3.6.1.4.1.259.8.1.2.100.27.1.16.4Scalarqos2SetDscpread-createcurrentremark dscp for the classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.5Scalarqos2SetPrecedenceread-createcurrentremark ip precedence for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.6Scalarqos2SetInternalPriorityread-createcurrentremark internal priority for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.7Scalarqos2SetDropPrecedenceread-createcurrentremark drop precedence for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.8Scalarqos2SetDefaultPBRread-createcurrent0:no set default PBR for classified flow; 1:set default PBR for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.9Scalarqos2SetVrfread-createcurrentset vrf value for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.10Scalarqos2SetnextHopread-createcurrentset nexthop for classified flow.
1.3.6.1.4.1.259.8.1.2.100.27.1.16.11Scalarqos2Setv6nextHopread-createcurrentset IPv6 nexthop for classified flow
1.3.6.1.4.1.259.8.1.2.100.27.1.16.12Scalarqos2SetCosread-createcurrentremark cos for classified flow
1.3.6.1.4.1.259.8.1.2.100.27.1.16.13Scalarqos2SetStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.
1.3.6.1.4.1.259.8.1.2.100.28NodemabMgt
1.3.6.1.4.1.259.8.1.2.100.28.1TablemabOnlineUserTablenot-accessiblecurrentShow the information of MAB users.
1.3.6.1.4.1.259.8.1.2.100.28.1.1RowmabOnlineUserEntrynot-accessiblecurrent
1.3.6.1.4.1.259.8.1.2.100.28.1.1.1ColumnmabOnlineUserIndexnot-accessiblecurrentThe index of MAB user.
1.3.6.1.4.1.259.8.1.2.100.28.1.1.2ColumnmabOnlineUserMacread-onlycurrentThe mac of MAB user.
1.3.6.1.4.1.259.8.1.2.100.28.1.1.3ColumnmabOnlineUserNameread-onlycurrentThe username of MAB user.
1.3.6.1.4.1.259.8.1.2.100.28.1.1.4ColumnmabOnlineUserPortread-onlycurrentThe port for MAB user.
1.3.6.1.4.1.259.8.1.2.100.28.1.1.5ColumnmabOnlineUserStateread-onlycurrentThe state of MAB user.
1.3.6.1.4.1.259.8.1.2.100.28.2ScalarmabSetUserOfflineread-writecurrentThe mac of user offline.
1.3.6.1.4.1.259.8.1.2.101Nodenotifications
1.3.6.1.4.1.259.8.1.2.101.100NodeantiArpscan
1.3.6.1.4.1.259.8.1.2.101.100.1NodeprohibitPortOID
1.3.6.1.4.1.259.8.1.2.101.100.2NoderecoverPortOID
1.3.6.1.4.1.259.8.1.2.101.100.3NodeprohibitIPOID
1.3.6.1.4.1.259.8.1.2.101.100.4NodeprohibitIPExceedSlimitOID
1.3.6.1.4.1.259.8.1.2.101.100.5NodeprohibitIPExceedHlimitOID
1.3.6.1.4.1.259.8.1.2.101.100.6NoderecoverIPOID
1.3.6.1.4.1.259.8.1.2.101.100.7NodeipAddress
1.3.6.1.4.1.259.8.1.2.101.101Nodefan
1.3.6.1.4.1.259.8.1.2.101.101.1NodefanAbnormalOID
1.3.6.1.4.1.259.8.1.2.101.101.2NodefanNormalOID
1.3.6.1.4.1.259.8.1.2.101.101.3NodefanInsertOID
1.3.6.1.4.1.259.8.1.2.101.101.4NodefanPullOutOID
1.3.6.1.4.1.259.8.1.2.101.102Nodepower
1.3.6.1.4.1.259.8.1.2.101.102.1NodepowerAbnormalOID
1.3.6.1.4.1.259.8.1.2.101.102.2NodepowerNormalOID
1.3.6.1.4.1.259.8.1.2.101.102.3NodepowerInsertOID
1.3.6.1.4.1.259.8.1.2.101.102.4NodepowerPullOutOID
1.3.6.1.4.1.259.8.1.2.101.103NodeslotTemperature
1.3.6.1.4.1.259.8.1.2.101.103.1NodeslotTemperatureHigherOID
1.3.6.1.4.1.259.8.1.2.101.103.2NodeslotTemperatureLowerOID
1.3.6.1.4.1.259.8.1.2.101.104Nodedhcpsnooping
1.3.6.1.4.1.259.8.1.2.101.104.1NodeshutdownPort
1.3.6.1.4.1.259.8.1.2.101.104.2NodenoShutdownPort
1.3.6.1.4.1.259.8.1.2.101.104.3NodeaddBlackhole
1.3.6.1.4.1.259.8.1.2.101.104.4NodedelBlackhole
1.3.6.1.4.1.259.8.1.2.101.105NoderateViolation
1.3.6.1.4.1.259.8.1.2.101.105.1NoderateViolationShutdownPort
1.3.6.1.4.1.259.8.1.2.101.105.2NoderateViolationNoShutdownPort
1.3.6.1.4.1.259.8.1.2.101.106NodeportGroup
1.3.6.1.4.1.259.8.1.2.101.106.1NodeportGroupCreate
1.3.6.1.4.1.259.8.1.2.101.106.2NodeportGroupDelete
1.3.6.1.4.1.259.8.1.2.101.106.2NodeportGroupUpdate
1.3.6.1.4.1.259.8.1.2.102Nodeconformance
Type Definitions
NameSyntaxStatusDescription
DisplayStringOCTET STRING
EnabledStatusPrivateINTEGER { enabled(1), disabled(0) }currentA simple status value for the object.
InetAddressOCTET STRING (SIZE (0..255))currentDenotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType…
InetAddressTypeINTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) }currentA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indica…
InterfaceIndexInteger32 (1..2147483647)currentA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re…
InterfaceIndexOrZeroInteger32 (0..2147483647)currentThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits t…
Ipv6AddressOCTET STRING (SIZE (16))currentThis data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order.
LldpChassisIdOCTET STRING (SIZE (1..255))currentThis TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan…
LldpChassisIdSubtypeINTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) }currentThis TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis componen…
LldpManAddressOCTET STRING (SIZE (1..31))currentThe value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such …
LldpManAddrIfSubtypeINTEGER { unknown(1), ifIndex(2), systemPortNumber(3) }currentThis TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' repre…
LldpPortIdOCTET STRING (SIZE (1..255))currentThis TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th…
LldpPortIdSubtypeINTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) }currentThis TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The …
LldpPortListOCTET STRING(SIZE(0..512))currentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
LldpPortNumberInteger32(1..4096)currentEach port contained in the chassis (that is known to the LLDP agent) is uniquely identified by a port number. A port number has no mandatory relationship to an InterfaceIndex object (of the interfaces MIB, IETF RFC 2683…
LldpSystemCapabilitiesMapBITS { other(0), repeater(1), bridge(2), accessPoint(3), router(4), telephone(5), wirelessStation(6), stationOnly(7) }currentThis TC describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'b…
MacAddressOCTET STRING (SIZE (17))
NtpDateTimeOCTET STRING (SIZE (0 | 16))current
NtpStratumUnsigned32 (1..16)currentThe NTP stratum, with 16 representing no stratum.
OspfAreaIDIpAddresscurrentAn OSPF Area Identifier.
OspfBigMetricInteger32 (0..'FFFFFE'h)currentThe OSPF External Metric.
PortListOCTET STRINGcurrentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
SnmpAdminStringOCTET STRING (SIZE (0..255))currentAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct…
TimeFilterTimeTickscurrent
ValidStatusINTEGER { valid(1), invalid(0) }currentA simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr…
VlanListOCTET STRINGcurrentVlan ID range is (1..4094), Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the mos…