EX2500-BASE-MIB
1206 objects
This mib module is the base mib for the propriatory mibs.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort dot1dBasePortEntry dot1dBridge dot1dTp dot1dTpPort |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| RFC1213-MIB | sysContact sysLocation sysName |
| SNMP-FRAMEWORK-MIB | SnmpAdminString SnmpEngineID SnmpMessageProcessingModel SnmpSecurityLevel SnmpSecurityModel |
| SNMP-USER-BASED-SM-MIB | usmNoAuthProtocol usmNoPrivProtocol |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1411 | Identityjuniper | This mib module is the base mib for the propriatory mibs. | ||
| 1.3.6.1.4.1.1411.102 | Nodeex2500 | |||
| 1.3.6.1.4.1.1411.102.15 | Nodebosntp | |||
| 1.3.6.1.4.1.1411.102.15.1 | NodentpCfg | |||
| 1.3.6.1.4.1.1411.102.15.1.1 | ScalarntpCfgAdminStatus | read-write | current | The administrative status of the NTP client service in the switch. A value of 'enabled' denotes that the client will regularly poll the NTP servers in order to… |
| 1.3.6.1.4.1.1411.102.15.1.2 | ScalarntpCfgPollInterval | read-write | current | The time interval, in minutes, between two polling periods wherein the client sends a request to the designated NTP servers. Set Poll Interval to zero would se… |
| 1.3.6.1.4.1.1411.102.15.1.3 | ScalarntpCfgPriServer | read-write | current | The IP address of the primary NTP server. Setting the address to all zeroes will remove the primary server configuration. During a polling period, the client f… |
| 1.3.6.1.4.1.1411.102.15.1.4 | ScalarntpCfgSecServer | read-write | current | The IP address of the secondary NTP server. Setting the address to all zeroes will remove the secondary server configuration. During a polling period, the clie… |
| 1.3.6.1.4.1.1411.102.15.1.5 | ScalarntpSysTime | read-only | current | System Time when the request is sent. |
| 1.3.6.1.4.1.1411.102.15.1.6 | ScalarntpLastUpdtTime | read-only | current | Last Updated Time when the response is received from Primary/Secondary server. |
| 1.3.6.1.4.1.1411.102.15.1.7 | ScalarntpLastUpdtServer | read-only | current | Server from which last time was updated. |
| 1.3.6.1.4.1.1411.102.15.1.8 | TablentpServerStatsTable | not-accessible | current | A table of statistics information for Primary and Secondary Servers supported by the NTP. |
| 1.3.6.1.4.1.1411.102.15.1.8.1 | RowntpServerStatsEntry | not-accessible | current | Index to the table is Ip Address to Primary/Secondary Server. |
| 1.3.6.1.4.1.1411.102.15.1.8.1.1 | ColumnntpIpAddress | not-accessible | current | The IP Address allocated to Primary/Secondary Server . |
| 1.3.6.1.4.1.1411.102.15.1.8.1.2 | ColumnntpStatSerReq | read-only | current | Number of requests Sent to Server. |
| 1.3.6.1.4.1.1411.102.15.1.8.1.3 | ColumnntpStatSerRep | read-only | current | Number of replies received from Server. |
| 1.3.6.1.4.1.1411.102.15.1.8.1.4 | ColumnntpStatSerUpd | read-only | current | Number of Updates received from Server. |
| 1.3.6.1.4.1.1411.102.15.1.8.1.5 | ColumnntpSerClearStat | read-write | current | Setting this to clear(2) results in clearing the statistics for respective Server. Setting this to OK(1) would not clear anything. |
| 1.3.6.1.4.1.1411.102.15.2 | NodentpOps | |||
| 1.3.6.1.4.1.1411.102.15.2.1 | ScalarntpOpsPollServer | read-write | current | Setting this object to 'yes' will trigger the NTP client to transmit a request to the designated servers. The set operation has no effect if the client is admi… |
| 1.3.6.1.4.1.1411.102.25 | Nodebosradius | |||
| 1.3.6.1.4.1.1411.102.25.1 | NoderadiusExtClient | |||
| 1.3.6.1.4.1.1411.102.25.1.1 | ScalarradiusExtDebugMask | read-write | current | Mask for enabling or disabling the Debug/Trace prints in the radius module. |
| 1.3.6.1.4.1.1411.102.25.1.2 | ScalarradiusMaxNoOfUserEntries | read-write | current | Max of No of User entries stored.For value of this object will be stored for the MemPool Initialization. |
| 1.3.6.1.4.1.1411.102.25.1.3 | ScalarradiusSecureBackdoorStatus | read-write | current | Status of RADIUS Server Secure Backdoor.If it is enabled allow noradius user to login with admin password otherwise it won't allow noradius user to login. |
| 1.3.6.1.4.1.1411.102.25.1.4 | ScalarradiusNewCfgPort | read-write | current | Specify the RADIUS port number. |
| 1.3.6.1.4.1.1411.102.25.1.5 | TableradiusExtServerTable | not-accessible | current | The (conceptual) table listing the RADIUS servers with which the client shares a secret. |
| 1.3.6.1.4.1.1411.102.25.1.5.1 | RowradiusExtServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS server with which the client shares a secret. |
| 1.3.6.1.4.1.1411.102.25.1.5.1.1 | ColumnradiusExtServerIndex | read-only | current | The RADIUS server with whom the client interacts. |
| 1.3.6.1.4.1.1411.102.25.1.5.1.2 | ColumnradiusExtServerAddress | read-write | current | The IP address of the RADIUS server referred to in this table entry. |
| 1.3.6.1.4.1.1411.102.25.1.5.1.3 | ColumnradiusExtServerType | read-write | current | The RADIUS server type (Authentication or Accounting(Not Available) or Both(Not Available)). For creating a server entry Server Type should be set |
| 1.3.6.1.4.1.1411.102.25.1.5.1.4 | ColumnradiusExtServerSharedSecret | read-write | current | The secret string which is shared between Server and Client |
| 1.3.6.1.4.1.1411.102.25.1.5.1.6 | ColumnradiusExtServerResponseTime | read-write | current | The maximum time within which the server has to respond for a request from the client |
| 1.3.6.1.4.1.1411.102.25.1.5.1.7 | ColumnradiusExtServerMaximumRetransmission | read-write | current | The allowed maximum no. of trials to be tried by a client to get response from the server for a request |
| 1.3.6.1.4.1.1411.102.25.1.5.1.8 | ColumnradiusExtServerEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.1411.102.25.1.6 | ScalarradiusExtServerEnabled | read-write | current | Flag to denote whether the server is active or Inactive |
| 1.3.6.1.4.1.1411.102.25.1.7 | ScalarradiusNewCfgAcctPort | read-write | current | Specify the RADIUS Accounting port number. |
| 1.3.6.1.4.1.1411.102.25.1.8 | ScalarradiusExtAcctEnabled | read-write | current | Flag to denote whether the RADIUS Accounting is active or Inactive |
| 1.3.6.1.4.1.1411.102.27 | Nodeboscfa | |||
| 1.3.6.1.4.1.1411.102.27.1 | Nodeif | |||
| 1.3.6.1.4.1.1411.102.27.1.1 | ScalarifMaxInterfaces | read-write | deprecated | Specifies the maximum number of interfaces that can be present in the system. |
| 1.3.6.1.4.1.1411.102.27.1.2 | ScalarifMaxPhysInterfaces | read-write | deprecated | Specifies the maximum number of physical interfaces that can be present in the system. |
| 1.3.6.1.4.1.1411.102.27.1.3 | ScalarifAvailableIndex | read-only | current | Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of inte… |
| 1.3.6.1.4.1.1411.102.27.1.4 | TableifMainTable | not-accessible | current | A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a p… |
| 1.3.6.1.4.1.1411.102.27.1.4.1 | RowifMainEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.1411.102.27.1.4.1.1 | ColumnifMainIndex | not-accessible | current | A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.1411.102.27.1.4.1.2 | ColumnifMainType | read-create | current | The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the ifMai… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.3 | ColumnifMainMtu | read-create | current | The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP … |
| 1.3.6.1.4.1.1411.102.27.1.4.1.4 | ColumnifMainAdminStatus | read-create | current | The desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdm… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.5 | ColumnifMainOperStatus | read-only | current | The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported current… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.6 | ColumnifMainEncapType | read-write | current | The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulatio… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.7 | ColumnifMainBrgPortType | read-write | current | The Bridge port type of this specified externally accessible port. Bridge Port type can be specified only for switch ports and not for router ports. providerNe… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.8 | ColumnifMainRowStatus | read-create | current | A RowStatus variable for addition, deletion and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status i… |
| 1.3.6.1.4.1.1411.102.27.1.4.1.9 | ColumnifMainPortName | read-write | current | This is used to assign a alias to a port |
| 1.3.6.1.4.1.1411.102.27.1.4.1.11 | ColumnifMainLinkStateChangeCount | read-only | current | No of Link State changes for the interface |
| 1.3.6.1.4.1.1411.102.27.1.4.1.12 | ColumnifMainVlanId | read-write | current | Specifies Vlan associated with the IP Interface |
| 1.3.6.1.4.1.1411.102.27.1.4.1.13 | ColumnifMainIntfIpNum | read-create | current | Specifies the Interface IP number assosiated with IP Interface |
| 1.3.6.1.4.1.1411.102.27.1.5 | TableifIpTable | not-accessible | current | A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over … |
| 1.3.6.1.4.1.1411.102.27.1.5.1 | RowifIpEntry | not-accessible | current | An entry containing management information applicable to a particular interface over which IP is operating. |
| 1.3.6.1.4.1.1411.102.27.1.5.1.1 | ColumnifIpAddrAllocMethod | read-write | current | The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obt… |
| 1.3.6.1.4.1.1411.102.27.1.5.1.2 | ColumnifIpAddr | read-write | current | Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PP… |
| 1.3.6.1.4.1.1411.102.27.1.5.1.3 | ColumnifIpSubnetMask | read-write | current | Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, th… |
| 1.3.6.1.4.1.1411.102.27.1.5.1.4 | ColumnifIpBroadcastAddr | read-write | current | Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a val… |
| 1.3.6.1.4.1.1411.102.27.1.5.1.5 | ColumnifIpForwardingEnable | read-write | current | Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that i… |
| 1.3.6.1.4.1.1411.102.27.1.5.1.6 | ColumnifIpAddrAllocProtocol | read-write | current | Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when ifIpAddrAllocMethod is set to dynamic (3). |
| 1.3.6.1.4.1.1411.102.27.1.6 | TableifIvrTable | not-accessible | current | A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the sema… |
| 1.3.6.1.4.1.1411.102.27.1.6.1 | RowifIvrEntry | not-accessible | current | An entry containing IVR-related information applicable to a interface. |
| 1.3.6.1.4.1.1411.102.27.1.6.1.1 | ColumnifIvrBridgedIface | read-write | current | Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing … |
| 1.3.6.1.4.1.1411.102.27.1.7 | ScalarifMaxIpInterfaces | read-only | current | Specifies the maximum number of IP interfaces that can be present in the system. |
| 1.3.6.1.4.1.1411.102.27.1.8 | ScalarifMaxMgmInterfaces | read-only | current | Specifies the maximum number of Mgmt interfaces that can be present in the system. |
| 1.3.6.1.4.1.1411.102.27.1.9 | ScalarifMaxLogicalInterfaces | read-only | current | Specifies the maximum number of logical interfaces that can be present in the system. |
| 1.3.6.1.4.1.1411.102.27.2 | Nodeff | |||
| 1.3.6.1.4.1.1411.102.27.2.2 | ScalarffCacheSize | read-write | deprecated | This object permits the resizing of the Host Cache. This object can be changed only when the Fast Forwarding Mechanism is disabled. For changing the Cache Size… |
| 1.3.6.1.4.1.1411.102.27.2.3 | ScalarffIpChecksumValidationEnable | read-write | deprecated | This object permits the enabling and disabling of the validation of the IP Checksum for incoming IP packets. Setting of this variable to TRUE(1) enables the ch… |
| 1.3.6.1.4.1.1411.102.27.2.4 | ScalarffCachePurgeCount | read-only | deprecated | A counter which indicates the number of times the entries in the Host Cache Table were purged due to cache overflow. |
| 1.3.6.1.4.1.1411.102.27.2.5 | ScalarffCacheLastPurgeTime | read-only | deprecated | Indicates the SysUpTime when the last purging of entries in the Host Cache Table took place. |
| 1.3.6.1.4.1.1411.102.27.2.6 | ScalarffStaticEntryInvalidTrapEnable | read-write | deprecated | Permits enabling and disabling of the generation of ffStaticEntryInvalid SNMP Enterprise Trap when a static entry becomes invalid. When its value is TRUE(1), t… |
| 1.3.6.1.4.1.1411.102.27.2.7 | ScalarffCurrentStaticEntryInvalidCount | read-only | deprecated | A counter which indicates the number of static entries in the Host Cache Table that are currently invalid. |
| 1.3.6.1.4.1.1411.102.27.2.8 | ScalarffTotalEntryCount | read-only | deprecated | A counter which indicates the total number of entries in the Host Cache Table. |
| 1.3.6.1.4.1.1411.102.27.2.9 | ScalarffStaticEntryCount | read-only | deprecated | A counter which indicates the number of static entries in the Host Cache Table. |
| 1.3.6.1.4.1.1411.102.27.2.10 | ScalarffTotalPktsFastForwarded | read-only | deprecated | A counter which indicates the number of packets that were successfully fast-forwarded by the host cache mechanism. |
| 1.3.6.1.4.1.1411.102.27.2.11 | TableffHostCacheTable | not-accessible | deprecated | This table has entries corresponding to the current entries in the Host Cache. The entries in this table can be added, deleted or modified. |
| 1.3.6.1.4.1.1411.102.27.2.11.1 | RowffHostCacheEntry | not-accessible | deprecated | An Entry consisting of all the information about an entry in the Host Cache. |
| 1.3.6.1.4.1.1411.102.27.2.11.1.1 | ColumnffHostCacheDestAddr | not-accessible | deprecated | The IP address of the destination host. |
| 1.3.6.1.4.1.1411.102.27.2.11.1.2 | ColumnffHostCacheNextHopAddr | read-create | deprecated | The IP address of the next-hop to which a packet for this host are forwarded. This could be same as ffHostCacheDestAddr if the next-hop is the end-host as well… |
| 1.3.6.1.4.1.1411.102.27.2.11.1.3 | ColumnffHostCacheIfIndex | read-create | deprecated | Identifies the MIB-2 ifIndex of the outgoing interface over which packets to this host are sent. When creating a static entry, this object should be set with t… |
| 1.3.6.1.4.1.1411.102.27.2.11.1.4 | ColumnffHostCacheNextHopMediaAddr | read-create | deprecated | Provides the media address of the next-hop to which the packet for this host is to be sent to. It is mandatory to specify the next-hop IP address and the outgo… |
| 1.3.6.1.4.1.1411.102.27.2.11.1.5 | ColumnffHostCacheHits | read-only | deprecated | Indicates the total number of packets fast- forwarded to this host. |
| 1.3.6.1.4.1.1411.102.27.2.11.1.6 | ColumnffHostCacheLastHitTime | read-only | deprecated | Indicates the SysUpTime when the last packet was fast-forwarded to this host. |
| 1.3.6.1.4.1.1411.102.27.2.11.1.7 | ColumnffHostCacheEntryType | read-create | deprecated | An object, which indicates the type of this Host Cache entry. A static entry is an entry created by the Network Manager and is not purged by the system. Such e… |
| 1.3.6.1.4.1.1411.102.27.2.11.1.8 | ColumnffHostCacheRowStatus | read-create | deprecated | A RowStatus object for addition/deletion of Host Cache entries. It also indicates the status of the entry. Set action is not allowed for notInService(2). An en… |
| 1.3.6.1.4.1.1411.102.27.3 | Nodefm | |||
| 1.3.6.1.4.1.1411.102.27.3.1 | ScalarfmMemoryResourceTrapEnable | read-write | deprecated | Permits the enabling and disabling of fmLowMemoryResource Trap when a memory allocation failure is encountered in the module. |
| 1.3.6.1.4.1.1411.102.27.3.2 | ScalarfmTimersResourceTrapEnable | read-write | deprecated | Permits the enabling and disabling of fmLowTimerResource Trap when a request for a timer fails in the module. |
| 1.3.6.1.4.1.1411.102.27.3.3 | ScalarfmTracingEnable | read-write | deprecated | Permits the enabling and disabling of the generation of the log/trace messages throughout the module. This object acts as a Tracing Level Flag and specifies th… |
| 1.3.6.1.4.1.1411.102.27.3.4 | ScalarfmMemAllocFailCount | read-only | current | Maintains a count of the number of times when a failure was encountered while memory allocation operation in the module. |
| 1.3.6.1.4.1.1411.102.27.3.5 | ScalarfmTimerReqFailCount | read-only | current | Maintains a count of the number of times when a failure was encountered while requesting a timer in the module. |
| 1.3.6.1.4.1.1411.102.27.4 | Nodetraps | |||
| 1.3.6.1.4.1.1411.102.27.4.0 | NodetrapPrefix | |||
| 1.3.6.1.4.1.1411.102.27.4.0.1 | NotificationfmLowTimerResource | deprecated | This trap is generated whenever there is a failure in a timer related operation in the module. This trap is generated only when the value of the fmTimersResouc… | |
| 1.3.6.1.4.1.1411.102.27.4.0.2 | NotificationfmLowBufferResource | deprecated | This trap is generated when a memory allocation failure occurs in the module. This trap is generated only when the value of the fmMemoryResourceTrapEnable obje… | |
| 1.3.6.1.4.1.1411.102.27.4.0.3 | NotificationffStaticEntryInvalid | deprecated | This trap is generated when a static entry in the ffHostCacheTable becomes invalid due to a route deletion or address resolution failure. This trap is generate… | |
| 1.3.6.1.4.1.1411.102.44 | Nodebosrmon | |||
| 1.3.6.1.4.1.1411.102.44.1 | ScalarrmonDebugType | read-write | current | This object defines the enabled debug flag for rmon |
| 1.3.6.1.4.1.1411.102.44.2 | ScalarrmonEnableStatus | read-write | current | This object defines the rmonenable flag for rmon |
| 1.3.6.1.4.1.1411.102.44.3 | ScalarrmonHwStatsSupp | read-write | current | This object defines the flag for whether HW supports Etherstatistics or not |
| 1.3.6.1.4.1.1411.102.44.4 | ScalarrmonHwHistorySupp | read-write | current | This object defines the enabled HWhistorysupp flag for rmon |
| 1.3.6.1.4.1.1411.102.44.5 | ScalarrmonHwAlarmSupp | read-write | current | This object defines the enabled HWAlarmsupp flag for rmon |
| 1.3.6.1.4.1.1411.102.44.6 | ScalarrmonHwHostSupp | read-write | current | This object defines the enabled HWhostsupp flag for rmon |
| 1.3.6.1.4.1.1411.102.44.7 | ScalarrmonHwHostTopNSupp | read-write | current | This object defines the enabled HWHostTopN flag for rmon |
| 1.3.6.1.4.1.1411.102.44.8 | ScalarrmonHwMatrixSupp | read-write | current | This object defines the enabled HWMatrix flag for rmon |
| 1.3.6.1.4.1.1411.102.44.9 | ScalarrmonHwEventSupp | read-write | current | This object defines the enabled HWEvent flag for rmon |
| 1.3.6.1.4.1.1411.102.62 | Nodebosla | |||
| 1.3.6.1.4.1.1411.102.62.1 | NodebosLaTrunkgroup | |||
| 1.3.6.1.4.1.1411.102.62.1.1 | ScalarbosLaTrunkGroupTableMaxSize | read-only | current | The maximum number of entries in trunk group table. |
| 1.3.6.1.4.1.1411.102.62.1.2 | TablebosLaTrunkGroupCfgTable | not-accessible | current | The table of trunk group configuration. |
| 1.3.6.1.4.1.1411.102.62.1.2.1 | RowbosLaTrunkGroupCfgTableEntry | not-accessible | current | A row in the trunk group configuration table. |
| 1.3.6.1.4.1.1411.102.62.1.2.1.1 | ColumnbosLaTrunkGroupCfgIndex | not-accessible | current | The identifier of the trunk group. |
| 1.3.6.1.4.1.1411.102.62.1.2.1.2 | ColumnbosLaTrunkGroupCfgPorts | read-only | current | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.1411.102.62.1.2.1.3 | ColumnbosLaTrunkGroupCfgAddPort | read-create | current | The port to be added in the trunk group. When read, 0 is returned. |
| 1.3.6.1.4.1.1411.102.62.1.2.1.4 | ColumnbosLaTrunkGroupCfgRemovePort | read-create | current | The port to be deleted from the trunk group. when read, 0 is returned. |
| 1.3.6.1.4.1.1411.102.62.1.2.1.5 | ColumnbosLaTrunkGroupCfgState | read-create | current | Enable or disable a trunk group. |
| 1.3.6.1.4.1.1411.102.62.1.2.1.6 | ColumnbosLaTrunkGroupCfgDelete | read-create | current | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.1411.102.62.2 | NodebosLaTrunkGroupInfo | |||
| 1.3.6.1.4.1.1411.102.62.2.1 | TablebosLaTrunkGroupInfoTable | not-accessible | current | The table of trunk group information. |
| 1.3.6.1.4.1.1411.102.62.2.1.1 | RowbosLaTrunkGroupInfoTableEntry | not-accessible | current | A row in trunk group information table. |
| 1.3.6.1.4.1.1411.102.62.2.1.1.1 | ColumnbosLaTrunkGroupInfoIndex | not-accessible | current | The identifier of the trunk group. |
| 1.3.6.1.4.1.1411.102.62.2.1.1.2 | ColumnbosLaTrunkGroupInfoState | read-only | current | Trunk group state. |
| 1.3.6.1.4.1.1411.102.62.2.1.1.3 | ColumnbosLaTrunkGroupInfoProtocol | read-only | current | Trunk group protocol None - Neither static nor lacp Static - static trunk group Lacp - dynamic trunk group |
| 1.3.6.1.4.1.1411.102.62.2.1.1.4 | ColumnbosLaTrunkGroupInfoPorts | read-only | current | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.1411.102.62.2.2 | TablebosLaTrunkGroupInfoPortTable | not-accessible | current | The table of Trunk Group Info. |
| 1.3.6.1.4.1.1411.102.62.2.2.1 | RowbosLaTrunkGroupInfoPortTableEntry | not-accessible | current | A row in the Trunk Info table. |
| 1.3.6.1.4.1.1411.102.62.2.2.1.1 | ColumnbosLaTrunkGroupInfoPortTrunkId | not-accessible | current | The Trunk identifier. |
| 1.3.6.1.4.1.1411.102.62.2.2.1.2 | ColumnbosLaTrunkGroupInfoPortPortId | not-accessible | current | The Port identifier. |
| 1.3.6.1.4.1.1411.102.62.2.2.1.3 | ColumnbosLaTrunkGroupInfoPortInstId | not-accessible | current | The Spanning Tree Group identifier. |
| 1.3.6.1.4.1.1411.102.62.2.2.1.4 | ColumnbosLaTrunkGroupInfoPortStatus | read-only | current | The Port Status. |
| 1.3.6.1.4.1.1411.102.62.3 | NodebosLaLacp | |||
| 1.3.6.1.4.1.1411.102.62.3.1 | ScalarbosLaLacpSystemPriority | read-write | current | A 2-octet read-write value indicating the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.1411.102.62.3.2 | ScalarbosLaLacpSystemTimeoutTime | read-write | current | If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3). |
| 1.3.6.1.4.1.1411.102.62.3.3 | TablebosLaLacpPortCfgTable | not-accessible | current | The table of LACP port configuration. |
| 1.3.6.1.4.1.1411.102.62.3.3.1 | RowbosLaLacpPortCfgTableEntry | not-accessible | current | A row in the LACP port configuration table. |
| 1.3.6.1.4.1.1411.102.62.3.3.1.1 | ColumnbosLaLacpPortCfgTableId | not-accessible | current | LACP port number. |
| 1.3.6.1.4.1.1411.102.62.3.3.1.2 | ColumnbosLaLacpPortState | read-write | current | LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp… |
| 1.3.6.1.4.1.1411.102.62.3.3.1.3 | ColumnbosLaLacpPortActorPortPriority | read-write | current | The priority value assigned to this Aggregation Port. This 16-bit value is read-write. |
| 1.3.6.1.4.1.1411.102.62.3.3.1.4 | ColumnbosLaLacpPortActorAdminKey | read-write | current | The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local signi… |
| 1.3.6.1.4.1.1411.102.62.3.3.1.5 | ColumnbosLaLacpPortStaticTrunkId | read-write | current | This object specifies the static lacp id of the port. Its value can be <0- Max number of static port channels>. '0' means the port is no longer in static lacp.… |
| 1.3.6.1.4.1.1411.102.62.4 | NodebosLaLacpStats | |||
| 1.3.6.1.4.1.1411.102.62.4.1 | TablebosLaLacpStatsTable | not-accessible | current | The table of LACP Stats. |
| 1.3.6.1.4.1.1411.102.62.4.1.1 | RowbosLaLacpStatsTableEntry | not-accessible | current | Lacp status info. |
| 1.3.6.1.4.1.1411.102.62.4.1.1.1 | ColumnlacpStatsIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1411.102.62.4.1.1.2 | ColumnlacpdusRx | read-only | current | Valid LACPDUs received |
| 1.3.6.1.4.1.1411.102.62.4.1.1.3 | ColumnmarkerpdusRx | read-only | current | Valid Marker PDUs received |
| 1.3.6.1.4.1.1411.102.62.4.1.1.4 | ColumnmarkerresponsepdusRx | read-only | current | Valid Marker Rsp PDUs received |
| 1.3.6.1.4.1.1411.102.62.4.1.1.5 | ColumnunknownRx | read-only | current | Unknown version/TLV type |
| 1.3.6.1.4.1.1411.102.62.4.1.1.6 | ColumnillegalRx | read-only | current | Illegal subtype received |
| 1.3.6.1.4.1.1411.102.62.4.1.1.7 | ColumnlacpdusTx | read-only | current | LACPDUs transmitted |
| 1.3.6.1.4.1.1411.102.62.4.1.1.8 | ColumnmarkerpdusTx | read-only | current | Market PDUs transmitted |
| 1.3.6.1.4.1.1411.102.62.4.1.1.9 | ColumnmarkerresponsepdusTx | read-only | current | Marker Rsp PDUs transmitted |
| 1.3.6.1.4.1.1411.102.62.4.1.1.10 | ColumnlacpClearStats | read-write | current | Setting this to clear(2) results in clearing the LACP statistics. |
| 1.3.6.1.4.1.1411.102.62.5 | NodebosLaLacpInfo | |||
| 1.3.6.1.4.1.1411.102.62.5.1 | TablebosLaLacpInfoAggrTable | not-accessible | current | The table of LACP aggregator information. |
| 1.3.6.1.4.1.1411.102.62.5.1.1 | RowbosLaLacpInfoAggrTableEntry | not-accessible | current | Information about a LACP aggregator. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.1 | ColumnbosLaLacpInfoAggrIndex | not-accessible | current | The aggregator identifier. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.2 | ColumnbosLaLacpInfoAggrId | read-only | current | The aggregator identifier. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.3 | ColumnbosLaLacpInfoAggrMac | read-only | current | A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.4 | ColumnbosLaLacpInfoAggrActSysPrio | read-only | current | A 2-octet read-only value indicating the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.5 | ColumnbosLaLacpInfoAggrActSysId | read-only | current | A 6-octet read-only MAC address value used as a unique identifier for the System that contains this Aggregator |
| 1.3.6.1.4.1.1411.102.62.5.1.1.6 | ColumnbosLaLacpInfoAggrIndivState | read-only | current | A read-only value indicating whether the Aggregator represents an Aggregate (`TRUE') or an Individual link (`FALSE'). |
| 1.3.6.1.4.1.1411.102.62.5.1.1.7 | ColumnbosLaLacpInfoAggrActAdminKey | read-only | current | The current administrative value of the Key for the Aggregator. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.8 | ColumnbosLaLacpInfoAggrActOperKey | read-only | current | The current operational value of the Key for the Aggregator. |
| 1.3.6.1.4.1.1411.102.62.5.1.1.9 | ColumnbosLaLacpInfoAggrPartSysPrio | read-only | current | A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Pri… |
| 1.3.6.1.4.1.1411.102.62.5.1.1.10 | ColumnbosLaLacpInfoAggrPartSysId | read-only | current | A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that t… |
| 1.3.6.1.4.1.1411.102.62.5.1.1.11 | ColumnbosLaLacpInfoAggrPartOperKey | read-only | current | The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually config… |
| 1.3.6.1.4.1.1411.102.62.5.1.1.12 | ColumnbosLaLacpInfoAggrReadyState | read-only | current | Aggregation Ready State |
| 1.3.6.1.4.1.1411.102.62.5.1.1.13 | ColumnbosLaLacpInfoAggrNumPorts | read-only | current | Number of ports configured in the aggregator |
| 1.3.6.1.4.1.1411.102.62.5.1.1.14 | ColumnbosLaLacpInfoAggrPorts | read-only | current | Ports configured in aggregator |
| 1.3.6.1.4.1.1411.102.62.5.2 | NodebosLaLacpInfoPort | |||
| 1.3.6.1.4.1.1411.102.62.5.2.1 | TablebosLaLacpInfoPortGeneralTable | not-accessible | current | The table of LACP port general information. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1 | RowbosLaLacpInfoPortGeneralTableEntry | not-accessible | current | General information about a LACP port. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.1 | ColumnbosLaLacpInfoPortGeneralIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.2 | ColumnbosLaLacpInfoPortLacpEna | read-only | current | Value indicating whether lacp is enabled (1) or disabled (2) on this port |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.3 | ColumnbosLaLacpInfoPortAdminEna | read-only | current | Value indicating whether the port is enabled (1) or disabled (2) |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.4 | ColumnbosLaLacpInfoPortActSysId | read-only | current | A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.5 | ColumnbosLaLacpInfoPortActSysPrio | read-only | current | A 2-octet read-only value used to define the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.6 | ColumnbosLaLacpInfoPortActAdminKey | read-only | current | The current administrative value of the Key for the Aggregation Port. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.7 | ColumnbosLaLacpInfoPortActOperKey | read-only | current | The current operational value of the Key for the Aggregation Port. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.8 | ColumnbosLaLacpInfoPortActPortNum | read-only | current | The ifIndex of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.9 | ColumnbosLaLacpInfoPortActPortPrio | read-only | current | The current administrative value of the port priority for the port |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.10 | ColumnbosLaLacpInfoPortIndivState | read-only | current | read-only value indicating whether the Aggregation Port is able to Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE'). |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.11 | ColumnbosLaLacpInfoSelAggrId | read-only | current | The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregat… |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.12 | ColumnbosLaLacpInfoAttAggrId | read-only | current | The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached … |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.13 | ColumnbosLaLacpInfoPortReadyN | read-only | current | True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each p… |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.14 | ColumnbosLaLacpInfoPortNtt | read-only | current | Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link. |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.15 | ColumnbosLaLacpInfoPortSelected | read-only | current | Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently … |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.16 | ColumnbosLaLacpInfoPortRxState | read-only | current | Receive machine state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.17 | ColumnbosLaLacpInfoPortMuxState | read-only | current | Mux machine state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.1.1.18 | ColumnbosLaLacpInfoPortTrunkType | read-only | current | This read-only object is used to display whether the port participates in dynamic lacp or static lacp. The default value is dynamic lacp. static(0) - The port … |
| 1.3.6.1.4.1.1411.102.62.5.2.2 | TablebosLaLacpInfoPortAdminTable | not-accessible | current | The table of LACP port admin information. |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1 | RowbosLaLacpInfoPortAdminTableEntry | not-accessible | current | Admin information about a LACP port. |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.1 | ColumnbosLaLacpInfoPortAdminIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.7 | ColumnbosLaLacpInfoPortActAdPortState | read-only | current | The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggreg… |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.8 | ColumnbosLaLacpInfoPortActAdActiv | read-only | current | This value indicates lacp activity(active/passive)) |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.9 | ColumnbosLaLacpInfoPortActAdSync | read-only | current | This value indicates Synchronization |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.10 | ColumnbosLaLacpInfoPortActAdDef | read-only | current | This value indicates Defaulted state |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.11 | ColumnbosLaLacpInfoPortActAdTimeout | read-only | current | This value indicates Timeout |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.12 | ColumnbosLaLacpInfoPortActAdColl | read-only | current | This value indicates Collecting state |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.13 | ColumnbosLaLacpInfoPortActAdExp | read-only | current | This value indicates Expired state |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.14 | ColumnbosLaLacpInfoPortActAdAggr | read-only | current | This value indicates Aggregating state |
| 1.3.6.1.4.1.1411.102.62.5.2.2.1.15 | ColumnbosLaLacpInfoPortActAdDist | read-only | current | This value indicates Distributing state |
| 1.3.6.1.4.1.1411.102.62.5.2.3 | TablebosLaLacpInfoPortOperTable | not-accessible | current | The table of LACP port oper information. |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1 | RowbosLaLacpInfoPortOperTableEntry | not-accessible | current | Oper information about a LACP port. |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.1 | ColumnbosLaLacpInfoPortOperIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.2 | ColumnbosLaLacpInfoPortPartOpSysPrio | read-only | current | A 2-octet read-write value used to define the value of priority associated with the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.3 | ColumnbosLaLacpInfoPortPartOpSysId | read-only | current | A 6-octet read-only MAC address value that defines the value of the System ID for the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.4 | ColumnbosLaLacpInfoPortPartOpKey | read-only | current | Lacp Key associated with the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.5 | ColumnbosLaLacpInfoPortPartOpPortNum | read-only | current | Partne port index |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.6 | ColumnbosLaLacpInfoPortPartOpPortPrio | read-only | current | Partner port priority |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.7 | ColumnbosLaLacpInfoPortActOpPortState | read-only | current | The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation… |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.8 | ColumnbosLaLacpInfoPortActOpActiv | read-only | current | Lacp Activity of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.9 | ColumnbosLaLacpInfoPortActOpSync | read-only | current | Synchronization state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.10 | ColumnbosLaLacpInfoPortActOpDef | read-only | current | Defaulted state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.11 | ColumnbosLaLacpInfoPortActOpTimeout | read-only | current | Timeout |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.12 | ColumnbosLaLacpInfoPortActOpColl | read-only | current | Collecting state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.13 | ColumnbosLaLacpInfoPortActOpExp | read-only | current | Expired state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.14 | ColumnbosLaLacpInfoPortActOpAggr | read-only | current | Aggregating state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.15 | ColumnbosLaLacpInfoPortActOpDist | read-only | current | Distributing state of the port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.16 | ColumnbosLaLacpInfoPortPartOpPortState | read-only | current | The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregati… |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.17 | ColumnbosLaLacpInfoPortPartOpActiv | read-only | current | Lacp Activity of partner |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.18 | ColumnbosLaLacpInfoPortPartOpSync | read-only | current | Synchronisation state of the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.19 | ColumnbosLaLacpInfoPortPartOpDef | read-only | current | defaulted state of the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.20 | ColumnbosLaLacpInfoPortPartOpTimeout | read-only | current | Timeout |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.21 | ColumnbosLaLacpInfoPortPartOpColl | read-only | current | Collecting state of the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.22 | ColumnbosLaLacpInfoPortPartOpExp | read-only | current | Expired state of the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.23 | ColumnbosLaLacpInfoPortPartOpAggr | read-only | current | Aggregating state of the partner port |
| 1.3.6.1.4.1.1411.102.62.5.2.3.1.24 | ColumnbosLaLacpInfoPortPartOpDist | read-only | current | Distributing state of the partner port |
| 1.3.6.1.4.1.1411.102.62.6 | NodebosLaThashL2 | |||
| 1.3.6.1.4.1.1411.102.62.6.1 | ScalarbosLaL2ThashCfgSmacState | read-write | current | Enable or disable smac hash. |
| 1.3.6.1.4.1.1411.102.62.6.2 | ScalarbosLaL2ThashCfgDmacState | read-write | current | Enable or disable dmac hash. |
| 1.3.6.1.4.1.1411.102.62.6.3 | ScalarbosLaL2ThashCfgSipState | read-write | current | Enable or disable sip hash. |
| 1.3.6.1.4.1.1411.102.62.6.4 | ScalarbosLaL2ThashCfgDipState | read-write | current | Enable or disable dip hash. |
| 1.3.6.1.4.1.1411.102.62.6.5 | ScalarbosLaL2ThashCfgSmacDmacState | read-write | current | Enable or disable smac-dmac hash. |
| 1.3.6.1.4.1.1411.102.62.6.6 | ScalarbosLaL2ThashCfgSipDipState | read-write | current | Enable or disable sip-dip hash. |
| 1.3.6.1.4.1.1411.102.68 | Nodebosufd | |||
| 1.3.6.1.4.1.1411.102.68.1 | NodeufdGeneralCfg | |||
| 1.3.6.1.4.1.1411.102.68.1.1 | ScalarufdFdpCfgState | read-write | current | Enable or disable FDP state |
| 1.3.6.1.4.1.1411.102.68.1.2 | ScalarufdCfgLtMPorts | read-only | current | The LtM port list. The ports are presented in a string format, delimited by ',' or an interval of ports delimited by '-' |
| 1.3.6.1.4.1.1411.102.68.1.3 | ScalarufdCfgLtMTrunks | read-only | current | The LtM trunk list. The trunks are presented in a string format, delimited by ',' or an interval of trunks delimited by '-' |
| 1.3.6.1.4.1.1411.102.68.1.4 | ScalarufdCfgLtMAdminkey | read-only | current | The LtM admin key. |
| 1.3.6.1.4.1.1411.102.68.1.5 | ScalarufdCfgLtDPorts | read-only | current | The LtD port list. The ports are presented in a string format, delimited by ',' or an interval of ports delimited by '-' |
| 1.3.6.1.4.1.1411.102.68.1.6 | ScalarufdCfgLtDTrunks | read-only | current | The LtD trunk list. The trunks are presented in a string format, delimited by ',' or an interval of trunks delimited by '-' |
| 1.3.6.1.4.1.1411.102.68.1.7 | ScalarufdLtDAdminkeyMaxEnt | read-only | current | The maximum number of rows in the LtD admin key configuration table. |
| 1.3.6.1.4.1.1411.102.68.1.8 | TableufdLtDAdminkeyCfgTable | not-accessible | current | The table of LtD admin key configuration. |
| 1.3.6.1.4.1.1411.102.68.1.8.1 | RowufdLtDAdminkeyCfgTableEntry | not-accessible | current | A row in the LtD admin key table. |
| 1.3.6.1.4.1.1411.102.68.1.8.1.1 | ColumnufdLtDAdminkeyCfg | read-only | current | The LtD admin key. |
| 1.3.6.1.4.1.1411.102.68.1.9 | ScalarufdCfgAddLtMPort | read-write | current | The port to be added to LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.10 | ScalarufdCfgRemoveLtMPort | read-write | current | The port to be removed from LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.11 | ScalarufdCfgAddLtMTrunk | read-write | current | The trunk to be added to LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.12 | ScalarufdCfgRemoveLtMTrunk | read-write | current | The trunk to be removed from LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.13 | ScalarufdCfgAddLtMAdminkey | read-write | current | The admin key to be added to LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.14 | ScalarufdCfgRemoveLtMAdminkey | read-write | current | The admin key to be removed from LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.15 | ScalarufdCfgAddLtDPort | read-write | current | The port to be added to LtD. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.16 | ScalarufdCfgRemoveLtDPort | read-write | current | The port to be removed from LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.17 | ScalarufdCfgAddLtDTrunk | read-write | current | The trunk to be added to LtM. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.18 | ScalarufdCfgRemoveLtDTrunk | read-write | current | The trunk to be removed from LtD. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.19 | ScalarufdCfgAddLtDAdminkey | read-write | current | The admin key to be added to LtD. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.20 | ScalarufdCfgRemoveLtDAdminkey | read-write | current | The admin key to be removed from LtD. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.68.1.21 | ScalarufdCfgGlobalState | read-write | current | Enable or disable gloabl ufd state. |
| 1.3.6.1.4.1.1411.102.68.2 | NodeufdStats | |||
| 1.3.6.1.4.1.1411.102.68.2.1 | ScalarufdNoLtMLinkFailure | read-only | current | |
| 1.3.6.1.4.1.1411.102.68.2.2 | ScalarufdNoLtMLinkBlockingState | read-only | current | |
| 1.3.6.1.4.1.1411.102.68.2.3 | ScalarufdNoLtDAutoDisabled | read-only | current | |
| 1.3.6.1.4.1.1411.102.68.2.4 | ScalarufdClearStats | read-write | current | Setting this value to clear(2) clears the UFD stats. |
| 1.3.6.1.4.1.1411.102.68.3 | NodeufdTraps | |||
| 1.3.6.1.4.1.1411.102.68.3.1 | NotificationufdCfgGlobalStateTrap | current | A ufdCfgGlobalStateTrap signifies the Enabled or disabled global ufd state. | |
| 1.3.6.1.4.1.1411.102.68.3.2 | NotificationufdCfgLtMTrap | current | The ufdCfgLtMTrap signifies that Ufd LtM states like LtMUp or LtMFailure. | |
| 1.3.6.1.4.1.1411.102.68.3.3 | NotificationufdCfgLtDTrap | current | The ufdCfgLtDTrap signifies that Ufd LtD states like ufdLtDDisable or ufdLtDEnable. | |
| 1.3.6.1.4.1.1411.102.77 | Nodebostacacs | |||
| 1.3.6.1.4.1.1411.102.77.1 | NodebosTacacsClientScalarGroup | |||
| 1.3.6.1.4.1.1411.102.77.1.1 | ScalarbosTacClntActiveServer | read-write | current | Maximim 5 server information could be configured. This object indicates the active server among those 5 servers. The TACACS+ client interacts with the server w… |
| 1.3.6.1.4.1.1411.102.77.1.2 | ScalarbosTacClntTraceLevel | read-write | current | The debug trace level for TACACS+ client implementation. This is bit mapped data. Each bit of this object reprsent a trace level. 0x00000001 - Infomation 0x000… |
| 1.3.6.1.4.1.1411.102.77.1.3 | ScalarbosTacClntRetransmit | read-write | current | number of times the tacacs+ client searches the list of TACACS+ servers |
| 1.3.6.1.4.1.1411.102.77.1.4 | NodebosTacClntStatisticsGroup | |||
| 1.3.6.1.4.1.1411.102.77.1.4.1 | ScalarbosTacClntAuthenStartRequests | read-only | current | No. of authentication start requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.2 | ScalarbosTacClntAuthenContinueRequests | read-only | current | No. of authentication continue requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.3 | ScalarbosTacClntAuthenEnableRequests | read-only | current | No. of authentication enable requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.4 | ScalarbosTacClntAuthenAbortRequests | read-only | current | No. of authentication abort requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.5 | ScalarbosTacClntAuthenPassReceived | read-only | current | No. of authentication pass received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.6 | ScalarbosTacClntAuthenFailReceived | read-only | current | No. of authentication fails received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.7 | ScalarbosTacClntAuthenGetUserReceived | read-only | current | No. of authentication get users received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.8 | ScalarbosTacClntAuthenGetPassReceived | read-only | current | No. of authentication get passwords received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.9 | ScalarbosTacClntAuthenGetDataReceived | read-only | current | No. of authentication get data received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.10 | ScalarbosTacClntAuthenErrorReceived | read-only | current | No. of authentication errors received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.11 | ScalarbosTacClntAuthenFollowReceived | read-only | current | No. of authentication follows received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.12 | ScalarbosTacClntAuthenRestartReceived | read-only | current | No. of authentication re starts received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.13 | ScalarbosTacClntAuthenSessionTimouts | read-only | current | No. of authentication session time outs |
| 1.3.6.1.4.1.1411.102.77.1.4.14 | ScalarbosTacClntAuthorRequests | read-only | current | No. of authorization requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.15 | ScalarbosTacClntAuthorPassAddReceived | read-only | current | No. of authorization pass adds received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.16 | ScalarbosTacClntAuthorPassReplReceived | read-only | current | No. of authorization pass replaces received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.17 | ScalarbosTacClntAuthorFailReceived | read-only | current | No. of authorization fails received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.18 | ScalarbosTacClntAuthorErrorReceived | read-only | current | No. of authorization errors received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.19 | ScalarbosTacClntAuthorFollowReceived | read-only | current | No. of authorization errors received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.20 | ScalarbosTacClntAuthorSessionTimeouts | read-only | current | No. of authorization session time outs |
| 1.3.6.1.4.1.1411.102.77.1.4.21 | ScalarbosTacClntAcctStartRequests | read-only | current | No. of accounting start requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.22 | ScalarbosTacClntAcctWdRequests | read-only | current | No. of accounting watch dog requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.23 | ScalarbosTacClntAcctStopRequests | read-only | current | No. of accounting stop requests sent to server |
| 1.3.6.1.4.1.1411.102.77.1.4.24 | ScalarbosTacClntAcctSuccessReceived | read-only | current | No. of accounting success received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.25 | ScalarbosTacClntAcctErrorReceived | read-only | current | No. of accounting errors received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.26 | ScalarbosTacClntAcctFollowReceived | read-only | current | No. of accounting follow received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.27 | ScalarbosTacClntAcctSessionTimeouts | read-only | current | No. of accounting session time outs |
| 1.3.6.1.4.1.1411.102.77.1.4.28 | ScalarbosTacClntMalformedPktsReceived | read-only | current | No. of Malformed packets received from server |
| 1.3.6.1.4.1.1411.102.77.1.4.29 | ScalarbosTacClntSocketFailures | read-only | current | No. of socket failures occured |
| 1.3.6.1.4.1.1411.102.77.1.4.30 | ScalarbosTacClntConnectionFailures | read-only | current | No. of connection failures occured |
| 1.3.6.1.4.1.1411.102.77.1.5 | ScalarbosTacClntPrivLevelMap | read-write | current | Enable/disable cisco like privilege level mapping. By default privilege level mapping is disabled.Privilege level mapping is 0 = CLI_AUTH_USER 3 = CLI_AUTH_OPE… |
| 1.3.6.1.4.1.1411.102.77.1.6 | ScalarbosTacClntSecureBackdoorStatus | read-write | current | Status of TACACS Server Secure Backdoor.If it is enabled allow notacacs user to login with admin password otherwise it won't allow notacacs user to login. |
| 1.3.6.1.4.1.1411.102.77.1.7 | ScalarbosTacClntServerEnabled | read-write | current | Flag to denote whether the server is active or Inactive |
| 1.3.6.1.4.1.1411.102.77.2 | NodebosTacacsClientTableGroup | |||
| 1.3.6.1.4.1.1411.102.77.2.1 | TablebosTacClntServerTable | not-accessible | current | The TACACS+ server table of server information entries. The entries have server information like server IP address, secretkey, port no, timeout |
| 1.3.6.1.4.1.1411.102.77.2.1.1 | RowbosTacClntServerEntry | not-accessible | current | The entry has server IP address, port no. secret key and timeout |
| 1.3.6.1.4.1.1411.102.77.2.1.1.1 | ColumnbosTacClntServerAddress | not-accessible | current | Server IP address |
| 1.3.6.1.4.1.1411.102.77.2.1.1.2 | ColumnbosTacClntServerStatus | read-create | current | Row status of the server entry |
| 1.3.6.1.4.1.1411.102.77.2.1.1.3 | ColumnbosTacClntServerSingleConnect | read-create | current | To inform whether single connect support is enabled for this server or not. When this is enabled multiple sessions are handled over single TCP connection |
| 1.3.6.1.4.1.1411.102.77.2.1.1.4 | ColumnbosTacClntServerPort | read-create | current | Server port no. for TACACS+ protocol. The default value is 49 |
| 1.3.6.1.4.1.1411.102.77.2.1.1.5 | ColumnbosTacClntServerTimeout | read-create | current | The time out value within which a response is expected from server. If response is not received within this time out, the session will be released |
| 1.3.6.1.4.1.1411.102.77.2.1.1.6 | ColumnbosTacClntServerKey | read-create | current | Secret key shared between the client and server for encryption and decryption |
| 1.3.6.1.4.1.1411.102.78 | NodebosPvrstMIB | |||
| 1.3.6.1.4.1.1411.102.78.1 | NodebosPvrst | |||
| 1.3.6.1.4.1.1411.102.78.1.1 | ScalarbosPvrstSystemControl | read-write | current | The administrative shutdown status requested by management for the Pvrst feature. The value start (1) indicates that Pvrst should be active in the device on al… |
| 1.3.6.1.4.1.1411.102.78.1.2 | ScalarbosPvrstModuleStatus | read-write | current | The administrative status requested by management for the Pvrst feature. The value enabled(1) indicates that Pvrst should be enabled in the device on all ports… |
| 1.3.6.1.4.1.1411.102.78.1.3 | ScalarbosPvrstNoOfActiveInstances | read-only | current | Indicates number of instances active currently |
| 1.3.6.1.4.1.1411.102.78.1.4 | ScalarbosPvrstBrgAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1411.102.78.1.5 | ScalarbosPvrstUpCount | read-only | current | The number of times Pvrst Module has been enabled. |
| 1.3.6.1.4.1.1411.102.78.1.6 | ScalarbosPvrstDownCount | read-only | current | The number of times PVRST Module has been disabled. |
| 1.3.6.1.4.1.1411.102.78.1.7 | ScalarbosPvrstTrace | read-write | current | This object is used to enable Trace Statements for the Pvrst Module in this context . A FOUR BYTE integer is used for enabling the level of tracing. Each BIT i… |
| 1.3.6.1.4.1.1411.102.78.1.8 | ScalarbosPvrstDebug | read-write | current | This object is used to enable Debug Statements in the PvrstP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte… |
| 1.3.6.1.4.1.1411.102.78.1.9 | ScalarbosPvrstBufferOverFlowCount | read-only | current | The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.78.1.10 | ScalarbosPvrstMemAllocFailureCount | read-only | current | The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.78.1.12 | ScalarbosPvrstUplinkFastStatus | read-write | current | The administrative status requested by management for the uplinkfast PVRST feature. The value enabled(1) indicates that uplinkfast Pvrst feature should be enab… |
| 1.3.6.1.4.1.1411.102.78.1.13 | ScalarbosPvrstUplinkFastMaxRate | read-write | current | This object sets the update rate to the number given in the range of 10-200. This object is applicable when uplinkfast PVRST feature is enabled on the system. |
| 1.3.6.1.4.1.1411.102.78.1.14 | TablebosPvrstPortTable | not-accessible | current | List of Ports per Virtual Context . |
| 1.3.6.1.4.1.1411.102.78.1.14.1 | RowbosPvrstPortEntry | not-accessible | current | Virtual Context Pvrst Module Port Parameters. |
| 1.3.6.1.4.1.1411.102.78.1.14.1.1 | ColumnbosPvrstPort | read-only | current | Port Number for the Context |
| 1.3.6.1.4.1.1411.102.78.1.14.1.2 | ColumnbosPvrstPortAdminEdgeStatus | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1411.102.78.1.14.1.3 | ColumnbosPvrstPortOperEdgePortStatus | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of bosPvrstPortAdminEdgeStatus and is set FALSE on reception of a BPDU. |
| 1.3.6.1.4.1.1411.102.78.1.14.1.4 | ColumnbosPvrstBridgeDetectionSemState | read-only | current | Current state of the bridge detetion state machine of this port for all Spanning Tree context |
| 1.3.6.1.4.1.1411.102.78.1.14.1.5 | ColumnbosPvrstPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.1411.102.78.1.14.1.6 | ColumnbosPvrstPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.1411.102.78.1.14.1.7 | ColumnbosPvrstPortBpduGuard | read-write | current | The administrative value for the BPDU guard is configurable on this Port |
| 1.3.6.1.4.1.1411.102.78.1.15 | TablebosPvrstInstBridgeTable | not-accessible | current | Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances. |
| 1.3.6.1.4.1.1411.102.78.1.15.1 | RowbosPvrstInstBridgeEntry | not-accessible | current | Entry indicating the Bridge Information. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.1 | ColumnbosPvrstInstInstanceIndex | not-accessible | current | Spanning Tree Instance to which the information belongs. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.2 | ColumnbosPvrstInstBridgePriority | read-write | current | The writable portion of the PVRST Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.3 | ColumnbosPvrstInstRootCost | read-only | current | The Cost of the path to the PVRST Root as seen by this bridge. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.4 | ColumnbosPvrstInstRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the PVRST Root Bridge. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.5 | ColumnbosPvrstInstBridgeMaxAge | read-write | current | Max Age of the Bridge Information |
| 1.3.6.1.4.1.1411.102.78.1.15.1.6 | ColumnbosPvrstInstBridgeHelloTime | read-write | current | Hello Time configured at Bridge Level |
| 1.3.6.1.4.1.1411.102.78.1.15.1.7 | ColumnbosPvrstInstBridgeForwardDelay | read-write | current | Forward Delay for STP bridge interoperability |
| 1.3.6.1.4.1.1411.102.78.1.15.1.8 | ColumnbosPvrstInstHoldTime | read-only | current | Hold Time for eah port |
| 1.3.6.1.4.1.1411.102.78.1.15.1.9 | ColumnbosPvrstInstTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.10 | ColumnbosPvrstInstTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.11 | ColumnbosPvrstInstNewRootCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.12 | ColumnbosPvrstInstInstanceUpCount | read-only | current | The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.13 | ColumnbosPvrstInstInstanceDownCount | read-only | current | The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.14 | ColumnbosPvrstInstPortRoleSelSemState | read-only | current | Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.15 | ColumnbosPvrstInstDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.1411.102.78.1.15.1.16 | ColumnbosPvrstInstRootMaxAge | read-only | current | Max Age of the Root Port information |
| 1.3.6.1.4.1.1411.102.78.1.15.1.17 | ColumnbosPvrstInstRootHelloTime | read-only | current | Hello Time configured for Root Port |
| 1.3.6.1.4.1.1411.102.78.1.15.1.18 | ColumnbosPvrstInstRootForwardDelay | read-only | current | Forward Delay configured for the Root Port |
| 1.3.6.1.4.1.1411.102.78.1.15.1.19 | ColumnbosPvrstInstSetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.1411.102.78.1.15.1.20 | ColumnbosPvrstInstResetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.1411.102.78.1.15.1.21 | ColumnbosPvrstInstEnableStatus | read-write | current | The administrative status requested by management for the PVRST feature per instance. The value enabled(1) indicates that Pvrst feature should be enabled in th… |
| 1.3.6.1.4.1.1411.102.78.1.16 | TablebosPvrstInstPortTable | not-accessible | current | This table contains Common Spanning Tree Port Information. |
| 1.3.6.1.4.1.1411.102.78.1.16.1 | RowbosPvrstInstPortEntry | not-accessible | current | A list of information maintained by every port for Each Spanning tree. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.1 | ColumnbosPvrstInstPortIndex | not-accessible | current | The Port Id of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.2 | ColumnbosPvrstInstPortStatus | read-write | current | Port status for this spanning tree |
| 1.3.6.1.4.1.1411.102.78.1.16.1.3 | ColumnbosPvrstInstPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the Inst Root which include this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.4 | ColumnbosPvrstInstPortPriority | read-write | current | The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the InstPortPriority value. The values that are … |
| 1.3.6.1.4.1.1411.102.78.1.16.1.5 | ColumnbosPvrstInstPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the Inst Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.6 | ColumnbosPvrstInstPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.7 | ColumnbosPvrstInstPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.8 | ColumnbosPvrstInstPortOperVersion | read-only | current | This indicates whether the Port is operationally in the Pvrst mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting Pvrst BPDUs, RS… |
| 1.3.6.1.4.1.1411.102.78.1.16.1.9 | ColumnbosPvrstInstPortProtocolMigration | read-only | current | Indicates the Protocol migration state of this Port. When operating in RSTP/Pvrst (version >= 2) mode, writing TRUE(1) to this object forces this port to trans… |
| 1.3.6.1.4.1.1411.102.78.1.16.1.10 | ColumnbosPvrstInstPortState | read-only | current | Current state of the Port as defined by the Common spanning tree protocol. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.11 | ColumnbosPvrstInstPortForwardTransitions | read-only | current | Number of times this port has transitioned to the Forwarding State. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.12 | ColumnbosPvrstInstPortReceivedBpdus | read-only | current | Number of Pvrst BPDUs received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.13 | ColumnbosPvrstInstPortRxConfigBpduCount | read-only | current | Number of Configuration BPDUs received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.14 | ColumnbosPvrstInstPortRxTcnBpduCount | read-only | current | Number of TCN BPDUs received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.15 | ColumnbosPvrstInstPortTransmittedBpdus | read-only | current | Number of Pvrst BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.16 | ColumnbosPvrstInstPortTxConfigBpduCount | read-only | current | Number of Configuration BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.17 | ColumnbosPvrstInstPortTxTcnBpduCount | read-only | current | Number of TCN BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.18 | ColumnbosPvrstInstPortInvalidBpdusRcvd | read-only | current | Number of Invalid Pvrst BPDUs Received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.19 | ColumnbosPvrstInstPortInvalidConfigBpduRxCount | read-only | current | Number of Invalid Configuration BPDUs Received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.20 | ColumnbosPvrstInstPortInvalidTcnBpduRxCount | read-only | current | Number of Invalid TCN BPDUs Received on this port. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.21 | ColumnbosPvrstInstPortTxSemState | read-only | current | Indicates current State of the Port Transmit state machine. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.22 | ColumnbosPvrstInstPortProtMigrationSemState | read-only | current | Indicates current State of the Port Protocol Migration State machine. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.23 | ColumnbosPvrstInstProtocolMigrationCount | read-only | current | The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/Pvrst. A Trap is genera… |
| 1.3.6.1.4.1.1411.102.78.1.16.1.24 | ColumnbosPvrstInstPortRole | read-only | current | Selected Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.25 | ColumnbosPvrstInstCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.26 | ColumnbosPvrstInstPortInfoSemState | read-only | current | Current state of the Port Information State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.27 | ColumnbosPvrstInstPortRoleTransitionSemState | read-only | current | Current state of the Port Role Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.28 | ColumnbosPvrstInstPortStateTransitionSemState | read-only | current | Current state of the Port State Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.29 | ColumnbosPvrstInstPortTopologyChangeSemState | read-only | current | Current state of the Topology Change State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.30 | ColumnbosPvrstInstPortEffectivePortState | read-only | current | The effective operational state of the port for Inst. This will TRUE only when the port is operationally up in the Interface level and Protocol level for Inst.… |
| 1.3.6.1.4.1.1411.102.78.1.16.1.31 | ColumnbosPvrstInstPortHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second. |
| 1.3.6.1.4.1.1411.102.78.1.16.1.32 | ColumnbosPvrstInstPortMaxAge | read-only | current | Max Age of the Bridge Information |
| 1.3.6.1.4.1.1411.102.78.1.16.1.33 | ColumnbosPvrstInstPortForwardDelay | read-only | current | Forward Delay for STP bridge interoperability |
| 1.3.6.1.4.1.1411.102.78.1.16.1.34 | ColumnbosPvrstInstPortHoldTime | read-only | current | Hold Time for eah port |
| 1.3.6.1.4.1.1411.102.78.2 | NodebosPvrstTrapsControl | |||
| 1.3.6.1.4.1.1411.102.78.2.1 | ScalarbosPvrstSetGlobalTrapOption | read-write | current | This object is used to enable and disable PvrstP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps … |
| 1.3.6.1.4.1.1411.102.78.2.2 | ScalarbosPvrstGlobalErrTrapType | read-only | current | Used within the Trap Notification PDU. It returns the following values none - none of the below values memfail - memory allocation failure bufffail - buffer al… |
| 1.3.6.1.4.1.1411.102.78.2.3 | ScalarbosPvrstSetTraps | read-write | current | This object is used to enable and disable context-specific PvrstP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like … |
| 1.3.6.1.4.1.1411.102.78.2.4 | ScalarbosPvrstGenTrapType | read-only | current | Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.1411.102.78.2.5 | TablebosPvrstPortTrapNotificationTable | not-accessible | current | This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintain… |
| 1.3.6.1.4.1.1411.102.78.2.5.1 | RowbosPvrstPortTrapNotificationEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.1411.102.78.2.5.1.1 | ColumnbosPvrstPortTrapIndex | read-only | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.1411.102.78.2.5.1.2 | ColumnbosPvrstPortMigrationType | read-only | current | Port Protocol migration type occured in the port |
| 1.3.6.1.4.1.1411.102.78.2.5.1.3 | ColumnbosPvrstPktErrType | read-only | current | Type of invalid packet received in each of the port |
| 1.3.6.1.4.1.1411.102.78.2.5.1.4 | ColumnbosPvrstPktErrVal | read-only | current | Packet error value corresponding to the above type |
| 1.3.6.1.4.1.1411.102.78.3 | NodebosPvrstTraps | |||
| 1.3.6.1.4.1.1411.102.78.3.0 | NodebosPvrstNotifyTraps | |||
| 1.3.6.1.4.1.1411.102.78.3.0.1 | NotificationbosPvrstGlobalErrTrap | current | Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurs | |
| 1.3.6.1.4.1.1411.102.78.3.0.2 | NotificationbosPvrstGenTrap | current | Generated when any of the general events like protocol up or protocol down occurs | |
| 1.3.6.1.4.1.1411.102.78.3.0.3 | NotificationbosPvrstNewRootTrap | current | Generated whenever a new root bridge is selected in the topology | |
| 1.3.6.1.4.1.1411.102.78.3.0.4 | NotificationbosPvrstTopologyChgTrap | current | Generated when topology change is detected | |
| 1.3.6.1.4.1.1411.102.78.3.0.5 | NotificationbosPvrstProtocolMigrationTrap | current | Generated when port protocol migration happens in the port | |
| 1.3.6.1.4.1.1411.102.78.3.0.6 | NotificationbosPvrstInvalidBpduRxdTrap | current | Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time | |
| 1.3.6.1.4.1.1411.102.79 | NodebosRstMIB | |||
| 1.3.6.1.4.1.1411.102.79.1 | Nodedot1wBosRst | |||
| 1.3.6.1.4.1.1411.102.79.1.1 | ScalarbosRstSystemControl | read-write | current | The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP shoul… |
| 1.3.6.1.4.1.1411.102.79.1.2 | ScalarbosRstModuleStatus | read-write | current | The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates t… |
| 1.3.6.1.4.1.1411.102.79.1.4 | ScalarbosRstDynamicPathcostCalculation | read-write | current | This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calc… |
| 1.3.6.1.4.1.1411.102.79.1.5 | ScalarbosRstOldDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.1411.102.79.2 | Nodedot1wBosRstTrapsControl | |||
| 1.3.6.1.4.1.1411.102.79.2.1 | ScalarbosRstSetTraps | read-write | current | This object is used to enable and disable specific RSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol u… |
| 1.3.6.1.4.1.1411.102.79.2.2 | ScalarbosRstGenTrapType | read-only | current | The general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.1411.102.79.2.3 | ScalarbosRstErrTrapType | read-only | current | The error event like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure |
| 1.3.6.1.4.1.1411.102.79.2.4 | TablebosRstPortTrapNotificationTable | not-accessible | current | This table is used to store the notification information occurred in each of the port for protocol migration and invalid packet received |
| 1.3.6.1.4.1.1411.102.79.2.4.1 | RowbosRstPortTrapNotificationEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.1411.102.79.2.4.1.1 | ColumnbosRstPortTrapIndex | not-accessible | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.1411.102.79.2.4.1.2 | ColumnbosRstPortMigrationType | read-only | current | Port Protocol migration type occurred in the port |
| 1.3.6.1.4.1.1411.102.79.2.4.1.3 | ColumnbosRstPktErrType | read-only | current | Type of invalid packet received in each of the port |
| 1.3.6.1.4.1.1411.102.79.2.4.1.4 | ColumnbosRstPktErrVal | read-only | current | Packet error value corresponding to the above type |
| 1.3.6.1.4.1.1411.102.79.2.4.1.5 | ColumnbosRstPortRoleType | read-only | current | Particular Role Selected for the Port |
| 1.3.6.1.4.1.1411.102.79.2.4.1.6 | ColumnbosRstOldRoleType | read-only | current | Particular Role which is existing for the Port |
| 1.3.6.1.4.1.1411.102.79.3 | Nodedot1wBosRstTraps | |||
| 1.3.6.1.4.1.1411.102.79.3.0 | NodebosRstTraps | |||
| 1.3.6.1.4.1.1411.102.79.3.0.1 | NotificationbosRstGenTrap | current | Generated when any of the general events like protocol up or protocol down occurrs | |
| 1.3.6.1.4.1.1411.102.79.3.0.2 | NotificationbosRstErrTrap | current | Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurrs | |
| 1.3.6.1.4.1.1411.102.79.3.0.3 | NotificationbosRstNewRootTrap | current | Generated whenever a new root bridge is selected in the topology | |
| 1.3.6.1.4.1.1411.102.79.3.0.4 | NotificationbosRstTopologyChgTrap | current | Generated when topology change is detected | |
| 1.3.6.1.4.1.1411.102.79.3.0.5 | NotificationbosRstProtocolMigrationTrap | current | Generated when port protocol migration happens in the port | |
| 1.3.6.1.4.1.1411.102.79.3.0.6 | NotificationbosRstInvalidBpduRxdTrap | current | Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time | |
| 1.3.6.1.4.1.1411.102.79.3.0.7 | NotificationbosRstNewPortRoleTrap | current | Generated whenever a new role is selected for the port | |
| 1.3.6.1.4.1.1411.102.80 | NodebosMstMIB | |||
| 1.3.6.1.4.1.1411.102.80.1 | Nodedot1sBosMst | |||
| 1.3.6.1.4.1.1411.102.80.1.1 | ScalarbosMstSystemControl | read-write | current | The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all po… |
| 1.3.6.1.4.1.1411.102.80.1.3 | ScalarbosMstMaxHopCount | read-write | current | The Maximum hope count is the maximum number of hops that the information for a particular Spanning Tree instance may traverse (via relay of BPDUs within the a… |
| 1.3.6.1.4.1.1411.102.80.1.4 | ScalarbosMstBrgAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1411.102.80.1.5 | ScalarbosMstCistRoot | read-only | current | The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C… |
| 1.3.6.1.4.1.1411.102.80.1.6 | ScalarbosMstCistRegionalRoot | read-only | current | The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used… |
| 1.3.6.1.4.1.1411.102.80.1.7 | ScalarbosMstCistRootCost | read-only | current | The Cost of the path to the CIST Root as seen from this bridge. |
| 1.3.6.1.4.1.1411.102.80.1.8 | ScalarbosMstCistRegionalRootCost | read-only | current | The Cost of the path to the CIST Regional Root as seen from this bridge. |
| 1.3.6.1.4.1.1411.102.80.1.9 | ScalarbosMstCistRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge. |
| 1.3.6.1.4.1.1411.102.80.1.10 | ScalarbosMstCistBridgePriority | read-write | current | The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of … |
| 1.3.6.1.4.1.1411.102.80.1.11 | ScalarbosMstCistBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may retur… |
| 1.3.6.1.4.1.1411.102.80.1.12 | ScalarbosMstCistBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related… |
| 1.3.6.1.4.1.1411.102.80.1.13 | ScalarbosMstCistMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of a second. This is the actual val… |
| 1.3.6.1.4.1.1411.102.80.1.14 | ScalarbosMstCistForwardDelay | read-only | current | This time value, measured in units of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determi… |
| 1.3.6.1.4.1.1411.102.80.1.15 | ScalarbosMstMstiRegionName | read-write | current | The Name for the Region's configuration. By Default Region Name is NULL. |
| 1.3.6.1.4.1.1411.102.80.1.16 | ScalarbosMstMstiRegionVersion | read-write | current | Version of the MST Region. |
| 1.3.6.1.4.1.1411.102.80.1.17 | ScalarbosMstMstiConfigDigest | read-only | current | The Configuration Digest value for this Region. |
| 1.3.6.1.4.1.1411.102.80.1.18 | ScalarbosMstBufferOverFlowCount | read-only | current | The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.19 | ScalarbosMstMemAllocFailureCount | read-only | current | The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.20 | ScalarbosMstRegionConfigChangeCount | read-only | current | The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.21 | ScalarbosMstCistBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context |
| 1.3.6.1.4.1.1411.102.80.1.23 | ScalarbosMstCistTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context. |
| 1.3.6.1.4.1.1411.102.80.1.24 | ScalarbosMstCistNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.25 | ScalarbosMstCistHelloTime | read-only | current | This time value, measured in units of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it i… |
| 1.3.6.1.4.1.1411.102.80.1.26 | ScalarbosMstCistBridgeHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node in units of a second. |
| 1.3.6.1.4.1.1411.102.80.1.27 | TablebosMstMstiBridgeTable | not-accessible | current | Table containing Bridge Information specific to Spanning Tree Instance. |
| 1.3.6.1.4.1.1411.102.80.1.27.1 | RowbosMstMstiBridgeEntry | not-accessible | current | Entry indicating the Bridge Information. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.1 | ColumnbosMstMstiInstanceIndex | not-accessible | current | Spanning Tree Instance to which the information belongs. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.2 | ColumnbosMstMstiBridgeRegionalRoot | read-only | current | MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs origin… |
| 1.3.6.1.4.1.1411.102.80.1.27.1.3 | ColumnbosMstMstiBridgePriority | read-write | current | The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.4 | ColumnbosMstMstiRootCost | read-only | current | The Cost of the path to the MSTI Regional Root as seen by this bridge. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.5 | ColumnbosMstMstiRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.7 | ColumnbosMstMstiTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.8 | ColumnbosMstMstiNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.9 | ColumnbosMstMstiBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.10 | ColumnbosMstInstanceUpCount | read-only | current | The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.11 | ColumnbosMstInstanceDownCount | read-only | current | The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.1411.102.80.1.27.1.12 | ColumnbosMstOldDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.1411.102.80.1.28 | TablebosMstVlanInstanceMappingTable | not-accessible | current | This table contains one entry for each instance of MSTP. |
| 1.3.6.1.4.1.1411.102.80.1.28.1 | RowbosMstVlanInstanceMappingEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.1411.102.80.1.28.1.1 | ColumnbosMstInstanceIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance. |
| 1.3.6.1.4.1.1411.102.80.1.28.1.2 | ColumnbosMstMapVlanIndex | read-write | current | The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This… |
| 1.3.6.1.4.1.1411.102.80.1.28.1.3 | ColumnbosMstUnMapVlanIndex | read-write | current | The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get… |
| 1.3.6.1.4.1.1411.102.80.1.28.1.4 | ColumnbosMstSetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.1411.102.80.1.28.1.5 | ColumnbosMstResetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.1411.102.80.1.28.1.6 | ColumnbosMstInstanceVlanMapped | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.1411.102.80.1.28.1.7 | ColumnbosMstInstanceVlanMapped2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.1411.102.80.1.28.1.8 | ColumnbosMstInstanceVlanMapped3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.1411.102.80.1.28.1.9 | ColumnbosMstInstanceVlanMapped4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.1411.102.80.1.30 | TablebosMstMstiPortTable | not-accessible | current | This table contains Spanning Tree Instance Specific Port Information. |
| 1.3.6.1.4.1.1411.102.80.1.30.1 | RowbosMstMstiPortEntry | not-accessible | current | A list of information maintained by every port for each and every spanning tree instance. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.1 | ColumnbosMstMstiPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.2 | ColumnbosMstMstiPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the MSTI Root which include this port. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.3 | ColumnbosMstMstiPortPriority | read-write | current | The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supporte… |
| 1.3.6.1.4.1.1411.102.80.1.30.1.4 | ColumnbosMstMstiPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.5 | ColumnbosMstMstiPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.6 | ColumnbosMstMstiPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.7 | ColumnbosMstMstiPortState | read-only | current | Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) sta… |
| 1.3.6.1.4.1.1411.102.80.1.30.1.8 | ColumnbosMstMstiForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if… |
| 1.3.6.1.4.1.1411.102.80.1.30.1.9 | ColumnbosMstMstiPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.1411.102.80.1.30.1.10 | ColumnbosMstMstiCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.80.1.31 | ScalarbosMstCistDynamicPathcostCalculation | read-write | current | This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calc… |
| 1.3.6.1.4.1.1411.102.80.2 | Nodedot1sBosMstTrapsControl | |||
| 1.3.6.1.4.1.1411.102.80.2.1 | ScalarbosMstSetTraps | read-write | current | This object is used to enable and disable specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol u… |
| 1.3.6.1.4.1.1411.102.80.2.2 | ScalarbosMstGenTrapType | read-only | current | The general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.1411.102.80.2.3 | ScalarbosMstErrTrapType | read-only | current | The error event like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure |
| 1.3.6.1.4.1.1411.102.80.2.4 | TablebosMstPortTrapNotificationTable | not-accessible | current | This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received |
| 1.3.6.1.4.1.1411.102.80.2.4.1 | RowbosMstPortTrapNotificationEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.1411.102.80.2.4.1.1 | ColumnbosMstPortTrapIndex | not-accessible | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.1411.102.80.2.4.1.2 | ColumnbosMstPortMigrationType | read-only | current | Port Protocol migration type occured in the port |
| 1.3.6.1.4.1.1411.102.80.2.4.1.3 | ColumnbosMstPktErrType | read-only | current | Type of invalid packet received in each of the port |
| 1.3.6.1.4.1.1411.102.80.2.4.1.4 | ColumnbosMstPktErrVal | read-only | current | Packet error value corresponding to the above type |
| 1.3.6.1.4.1.1411.102.80.2.5 | TablebosMstPortRoleTrapNotificationTable | not-accessible | current | This table is used to store the notification information occured in each of the port during role change. |
| 1.3.6.1.4.1.1411.102.80.2.5.1 | RowbosMstPortRoleTrapNotificationEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.1411.102.80.2.5.1.1 | ColumnbosMstPortRoleType | read-only | current | Particular Role Selected for the Port |
| 1.3.6.1.4.1.1411.102.80.2.5.1.2 | ColumnbosMstOldRoleType | read-only | current | Particular Role which is existing for the Port |
| 1.3.6.1.4.1.1411.102.80.3 | Nodedot1sBosMstTraps | |||
| 1.3.6.1.4.1.1411.102.80.3.0 | NodebosMstTraps | |||
| 1.3.6.1.4.1.1411.102.80.3.0.1 | NotificationbosMstGenTrap | current | Generated when any of the general events like protocol up or protocol down occurs | |
| 1.3.6.1.4.1.1411.102.80.3.0.2 | NotificationbosMstErrTrap | current | Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurs | |
| 1.3.6.1.4.1.1411.102.80.3.0.3 | NotificationbosMstNewRootTrap | current | Generated whenever a new root bridge is selected in the topology | |
| 1.3.6.1.4.1.1411.102.80.3.0.4 | NotificationbosMstTopologyChgTrap | current | Generated when topology change is detected | |
| 1.3.6.1.4.1.1411.102.80.3.0.5 | NotificationbosMstProtocolMigrationTrap | current | Generated when port protocol migration happens in the port | |
| 1.3.6.1.4.1.1411.102.80.3.0.6 | NotificationbosMstInvalidBpduRxdTrap | current | Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time | |
| 1.3.6.1.4.1.1411.102.80.3.0.7 | NotificationbosMstRegionConfigChangeTrap | current | Generated when the MST region's configuration identifier changes. | |
| 1.3.6.1.4.1.1411.102.80.3.0.8 | NotificationbosMstNewPortRoleTrap | current | Generated whenever a new role is selected for the port | |
| 1.3.6.1.4.1.1411.102.81 | Nodebos | |||
| 1.3.6.1.4.1.1411.102.81.1 | NodebosSystem | |||
| 1.3.6.1.4.1.1411.102.81.1.2 | ScalarbosHardwareVersion | read-only | current | Version number of the Hardware. |
| 1.3.6.1.4.1.1411.102.81.1.10 | ScalarbosConfigSaveOption | read-write | current | Specifies whether the configurations of the switch has to be saved or not. The value 'noSave' specifies that the configurations need not be saved. The value 'f… |
| 1.3.6.1.4.1.1411.102.81.1.12 | ScalarbosConfigSaveFileName | read-write | current | Name of the file in which the switch configurations are to be saved. This object is valid only if 'issConfigSaveOption' is chosen to be 'flashSave' or 'remoteS… |
| 1.3.6.1.4.1.1411.102.81.1.14 | ScalarbosConfigSaveStatus | read-only | current | Status of configuration save operation. |
| 1.3.6.1.4.1.1411.102.81.1.15 | ScalarbosConfigRestoreOption | read-write | current | Specifies whether the switch configurations have to be restored or not. The value 'factory' specifies that the switch configurations need not be restored when … |
| 1.3.6.1.4.1.1411.102.81.1.19 | ScalarbosConfigRestoreStatus | read-only | current | The status of the switch configuration restore operation. |
| 1.3.6.1.4.1.1411.102.81.1.26 | ScalarbosLoggingOption | read-write | current | The Logging option specifying whether the logging is to be done at console or to a file(system buffer) in the system. |
| 1.3.6.1.4.1.1411.102.81.1.32 | ScalarbosLoginAuthentication | read-write | current | The mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side … |
| 1.3.6.1.4.1.1411.102.81.1.35 | ScalarbosSwitchDate | read-write | current | The date is configured in the switch in the format, Hours:Minutes:Seconds Day Month Year e.g 19:10:31 11 08 2005 01-12 Month - beginning from January to Decemb… |
| 1.3.6.1.4.1.1411.102.81.1.39 | ScalarbosHttpStatus | read-write | current | This object is for enabling or disabling HTTP in the system. |
| 1.3.6.1.4.1.1411.102.81.1.40 | ScalarbosConfigRestoreFileVersion | read-only | current | Config Restoration file version. This version will be compared in each reboot against version stored in restoration file. Restoration will occur only if the fi… |
| 1.3.6.1.4.1.1411.102.81.1.46 | ScalarbosTelnetStatus | read-write | current | This object is for enabling or disabling the TELNET access to the system. Set operation of enable will move this object to the enableInProgress first and then … |
| 1.3.6.1.4.1.1411.102.81.1.47 | ScalarbosTimeZone | read-write | current | Timezone values can be 1-374. To unset Timezone use Value 0. |
| 1.3.6.1.4.1.1411.102.81.1.48 | ScalarbosDayLightSaving | read-write | current | DayLight Saving can be enabled/disabled. |
| 1.3.6.1.4.1.1411.102.81.1.49 | ScalarbosLastBootTime | read-only | current | The Display of the date is in the format , WeekDay Month Day Hours:Minutes:Seconds Year e.g 04 09 21 18:11:30 2005 01-07 WeekDay - beginning from Sunday to Sat… |
| 1.3.6.1.4.1.1411.102.81.1.50 | ScalarbosAllocCount | read-only | current | Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.1411.102.81.1.51 | ScalarbosReleaseCount | read-only | current | Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.1411.102.81.1.52 | ScalarbosAllocFailCount | read-only | current | Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.1411.102.81.1.53 | ScalarbosPeakUsageCount | read-only | current | The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protoc… |
| 1.3.6.1.4.1.1411.102.81.2 | NodebosConfigControl | |||
| 1.3.6.1.4.1.1411.102.81.2.1 | TablebosConfigCtrlTable | not-accessible | current | A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.1411.102.81.2.1.1 | RowbosConfigCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. In addition to that an entry with index '0' is created in this table by default. If 'bosConfig… |
| 1.3.6.1.4.1.1411.102.81.2.1.1.1 | ColumnbosConfigCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index '0', that configuration… |
| 1.3.6.1.4.1.1411.102.81.2.1.1.2 | ColumnbosConfigCtrlEgressStatus | read-write | current | Controls the transmission of egress traffic over this interface. This value for entry '0' controls the egress traffic over all interfaces. |
| 1.3.6.1.4.1.1411.102.81.2.1.1.3 | ColumnbosConfigCtrlStatsCollection | read-write | current | Enables or disables statistics collection for this interface. This value for entry '0' controls the stats collection for all interfaces. |
| 1.3.6.1.4.1.1411.102.81.2.1.1.4 | ColumnbosConfigCtrlStatus | read-write | current | Speficies the validity of the entry. If the 'Config Control Status' for entry '0' is made 'valid', then global control is chosen in the system. It signifies th… |
| 1.3.6.1.4.1.1411.102.81.2.2 | TablebosPortCtrlTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.1411.102.81.2.2.1 | RowbosPortCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.1411.102.81.2.2.1.1 | ColumnbosPortCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.1411.102.81.2.2.1.2 | ColumnbosPortCtrlMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.1411.102.81.2.2.1.3 | ColumnbosPortCtrlDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.1411.102.81.2.2.1.4 | ColumnbosPortCtrlSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.1411.102.81.2.2.1.5 | ColumnbosPortCtrlFlowControl | read-write | current | This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode fo… |
| 1.3.6.1.4.1.1411.102.81.2.2.1.6 | ColumnbosPortCtrlOperDuplex | read-only | current | This object reflects the interface current data transfer mode, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiati… |
| 1.3.6.1.4.1.1411.102.81.2.2.1.7 | ColumnbosPortCtrlOperSpeed | read-only | current | This object reflects the interface current speed , as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not en… |
| 1.3.6.1.4.1.1411.102.81.8 | Nodebosext | |||
| 1.3.6.1.4.1.1411.102.81.8.4 | NodebosRateControl | |||
| 1.3.6.1.4.1.1411.102.81.8.4.1 | TablebosRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.1411.102.81.8.4.1.1 | RowbosRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical interface in the switch. |
| 1.3.6.1.4.1.1411.102.81.8.4.1.1.1 | ColumnbosRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.1411.102.81.8.4.1.1.2 | ColumnbosRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the… |
| 1.3.6.1.4.1.1411.102.81.8.4.1.1.3 | ColumnbosRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.1411.102.81.8.4.1.1.4 | ColumnbosRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.1411.102.81.8.5 | NodebosMacAcl | |||
| 1.3.6.1.4.1.1411.102.81.8.5.1 | TablebosMacAclTable | not-accessible | current | A table to configure Mac Acl rules in the system. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1 | RowbosMacAclEntry | not-accessible | current | Each entry in this table is a Mac Acl rule. Index to the table is the Mac Acl number. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.1 | ColumnbosMacAclNo | not-accessible | current | Mac Acl rule number. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.2 | ColumnbosMacAclProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.3 | ColumnbosMacAclDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.4 | ColumnbosMacAclSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.5 | ColumnbosMacAclVlanId | read-write | current | Vlan Id to be filtered. A value of '0' means, no vlan is configured for filtering allowed. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.6 | ColumnbosMacAclInPortList | read-write | current | Specifies the complete set of ports over which if the packet arrives the filter rule will be applicable. If the incoming port list is '0', the filter rule is a… |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.7 | ColumnbosMacAclOutPortList | read-write | current | This object is applicable only if the 'FilterAction' is 'allow'. If the out going port list is non-zero, the packet will be sent over the specifed ports only. … |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.8 | ColumnbosMacAclAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.9 | ColumnbosMacAclMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.10 | ColumnbosMacAclStatsStatus | read-write | current | If stats status is true then the ACL's Hit Count is maintained. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.11 | ColumnbosMacAclStats | read-only | current | Number of times this filter is hit. |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.12 | ColumnbosMacAclClearStats | read-write | current | Clear ACL statistics |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.13 | ColumnbosMacAclUserPriority | read-create | current | Used to set the user priority |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.14 | ColumnbosMacAclMirror | read-write | current | This object is used to specify the ACL action to mirror in addition to permit or deny. This attribute requires the ACL action to be configured. This can be ena… |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.15 | ColumnbosMacAclMirrorPort | read-write | current | This object is used to specify the port to which the packets matching the ACLs will be mirrored. This attribute will be operational only when bosMacAclMirror i… |
| 1.3.6.1.4.1.1411.102.81.8.5.1.1.16 | ColumnbosMacAclStatus | read-create | current | This object indicates the status of this entry. The entry status will be made 'active' only if configured in case of MacAcl. |
| 1.3.6.1.4.1.1411.102.81.8.6 | NodebosIpAcl | |||
| 1.3.6.1.4.1.1411.102.81.8.6.1 | TablebosIpAclTable | not-accessible | current | A table to configure Ip Acl rules in the system. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1 | RowbosIpAclEntry | not-accessible | current | Each entry in this table is a Ip Acl rule. Index to the table is Ip Acl number. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.1 | ColumnbosIpAclNo | not-accessible | current | Ip Acl rule number. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.2 | ColumnbosIpAclProtocol | read-write | current | The type of protocol to be checked against the packet. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.3 | ColumnbosIpAclMessageType | read-write | current | The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.4 | ColumnbosIpAclMessageCode | read-write | current | The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.5 | ColumnbosIpAclDstIpAddr | read-write | current | Destination IP address to be matched with the packet. This object is valid only if the 'bosFilterType' is 'IpAcl'. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.6 | ColumnbosIpAclSrcIpAddr | read-write | current | Source IP address to be matched with the packet. This object is valid only if the 'bosFilterType' is 'IpAcl'. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.7 | ColumnbosIpAclDstIpAddrMask | read-write | current | The IP subnet mask for Destination IP address. This object is valid only if the 'bosFilterType' is 'IpAcl'. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.8 | ColumnbosIpAclSrcIpAddrMask | read-write | current | The IP subnet mask for Source IP address. This object is valid only if the 'bosFilterType' is 'IpAcl'. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.9 | ColumnbosIpAclMinDstProtPort | read-write | current | The minimum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.10 | ColumnbosIpAclMaxDstProtPort | read-write | current | The maximum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.11 | ColumnbosIpAclMinSrcProtPort | read-write | current | The minimum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.12 | ColumnbosIpAclMaxSrcProtPort | read-write | current | The maximum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.13 | ColumnbosIpAclInPortList | read-write | current | Specifies the complete set of ports over which if the packet arrives the filter rule will be applicable. If the incoming port list is '0', the filter rule is a… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.14 | ColumnbosIpAclOutPortList | read-write | current | This object is applicable only if the 'FilterAction' is 'allow'. If the out going port list is non-zero, the packet will be sent over the specifed ports only. … |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.15 | ColumnbosIpAclAckBit | read-create | current | The TCP ACK bit to be checked against the packet. The default value is 'any'(3). It means that ACK bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.16 | ColumnbosIpAclRstBit | read-create | current | The TCP RST bit to be checked against the packet. The default value is 'any'(3). It means that RST bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.17 | ColumnbosIpAclFinBit | read-create | current | The TCP FIN bit to be checked against the packet. The default value is 'any'(3). It means that FIN bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.18 | ColumnbosIpAclSynBit | read-create | current | The TCP SYN bit to be checked against the packet. The default value is 'any'(3). It means that SYN bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.19 | ColumnbosIpAclUrgBit | read-create | current | The TCP URG bit to be checked against the packet. The default value is 'any'(3). It means that URG bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.20 | ColumnbosIpAclPshBit | read-create | current | The TCP PSH bit to be checked against the packet. The default value is 'any'(3). It means that PSH bit will not be checked to decide the action. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.21 | ColumnbosIpAclTos | read-create | current | The IP TOS bit to be checked against the packet. This is a single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.22 | ColumnbosIpAclDscp | read-create | current | The IP Dscp value to be checked against the packet. If this field is assigned a value of -1, Dscp field will be ignored while filtering. The default value for … |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.23 | ColumnbosIpAclAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. I… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.24 | ColumnbosIpAclMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.25 | ColumnbosIpAclStatsStatus | read-write | current | If stats status is true then the ACL's Hit Count is maintained. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.26 | ColumnbosIpAclStats | read-only | current | Number of times this filter is hit. |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.27 | ColumnbosIpAclClearStats | read-write | current | Clear ACL statistics |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.28 | ColumnbosIpAclType | read-write | current | This object is used to specify the category of IP filters. Standard IP filter provides the basic IP filter option (IP address/mask) whereas extended IP filter … |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.29 | ColumnbosIpAclMirror | read-write | current | This object is used to specify the ACL action to mirror in addition to permit or deny. This attribute requires the ACL action to be configured. This can be ena… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.30 | ColumnbosIpAclMirrorPort | read-write | current | This object is used to specify the port to which the packets matching the ACLs will be mirrored. This attribute will be operational only when bosIpAclMirror is… |
| 1.3.6.1.4.1.1411.102.81.8.6.1.1.31 | ColumnbosIpAclStatus | read-create | current | This object indicates the status of this entry. The entry status will be made 'active' only if configured in case of IpAcl. |
| 1.3.6.1.4.1.1411.102.87 | NodebosDhcpClientMIB | |||
| 1.3.6.1.4.1.1411.102.87.1 | NodedhcpClientConfig | |||
| 1.3.6.1.4.1.1411.102.87.1.1 | TabledhcpClientConfigTable | not-accessible | current | This table contains the Configuration information for DHCP client on each interface. |
| 1.3.6.1.4.1.1411.102.87.1.1.1 | RowdhcpClientConfigEntry | not-accessible | current | Entries of the dhcpClientConfigTable |
| 1.3.6.1.4.1.1411.102.87.1.1.1.1 | ColumndhcpClientConfigIfIndex | not-accessible | current | Index of one entry in dhcpClientConfigTable |
| 1.3.6.1.4.1.1411.102.87.1.1.1.2 | ColumndhcpClientRenew | read-write | current | This object is for renewing the lease time currently available. When this object is set,Client will send DHCP Renew Request message provided client is in BOUND… |
| 1.3.6.1.4.1.1411.102.87.1.1.1.5 | ColumndhcpClientRelease | read-write | current | This object is used to release the acquired IP back to the DHCP server pool.When this object is set,Client will send DHCP RELEASE message provided client is in… |
| 1.3.6.1.4.1.1411.102.87.2 | NodedhcpClientCounters | |||
| 1.3.6.1.4.1.1411.102.87.2.1 | TabledhcpClientCounterTable | not-accessible | current | This table contains the statistics of DHCP Client on each interface. It will give the no of messages sent and received at any time |
| 1.3.6.1.4.1.1411.102.87.2.1.1 | RowdhcpClientCounterEntry | not-accessible | current | Entries of the dhcpClientCounterTable |
| 1.3.6.1.4.1.1411.102.87.2.1.1.1 | ColumndhcpClientIfIndex | not-accessible | current | Index of one entry in dhcpClientCounterTable |
| 1.3.6.1.4.1.1411.102.87.2.1.1.2 | ColumndhcpClientCountDiscovers | read-only | current | The number of DHCPDISCOVER (option 53 with value 1) packets sent. |
| 1.3.6.1.4.1.1411.102.87.2.1.1.3 | ColumndhcpClientCountRequests | read-only | current | The number of DHCPREQUEST (option 53 with value 3) packets sent. |
| 1.3.6.1.4.1.1411.102.87.2.1.1.4 | ColumndhcpClientCountReleases | read-only | current | The number of DHCPRELEASE (option 53 with value 7) packets sent. |
| 1.3.6.1.4.1.1411.102.87.2.1.1.5 | ColumndhcpClientCountDeclines | read-only | current | The number of DHCPDECLINE (option 53 with value 4) packets sent. |
| 1.3.6.1.4.1.1411.102.87.2.1.1.20 | ColumndhcpClientLeaseTime | read-only | current | The negotiated Lease time of particular interface |
| 1.3.6.1.4.1.1411.102.87.2.1.1.21 | ColumndhcpClientCounterReset | read-write | current | It resets the Counter Stats for the particular interface |
| 1.3.6.1.4.1.1411.102.87.2.1.1.22 | ColumndhcpClientRemainLeaseTime | read-only | current | It gets the remaining lease time of the particular interface |
| 1.3.6.1.4.1.1411.102.89 | NodebosSyslog | |||
| 1.3.6.1.4.1.1411.102.89.1 | NodebosSyslogGeneralGroup | |||
| 1.3.6.1.4.1.1411.102.89.1.1 | ScalarbosSyslogLogging | read-write | current | This object is for enabling or disabling syslog and email alert features in the system. |
| 1.3.6.1.4.1.1411.102.89.1.2 | ScalarbosSyslogTimeStamp | read-write | current | This object is for enabling or disabling timestamp option. When enabled, the messages (log and email alert messages) will hold the time stamp information. When… |
| 1.3.6.1.4.1.1411.102.89.1.3 | ScalarbosSyslogConsoleLog | read-write | current | This object is for enabling or disabling the console log option. When enabled, the messages (log and email alert messages) sent to the server will be displayed… |
| 1.3.6.1.4.1.1411.102.89.1.4 | ScalarbosSyslogSysBuffers | read-write | current | Number of log buffers to be allocated in the system |
| 1.3.6.1.4.1.1411.102.89.1.5 | ScalarbosSyslogClearLog | read-write | current | Clears the buffered logs. This object is set to 'false' by default. When set to 'True', the buffered logs will be cleared and the value of this object will bec… |
| 1.3.6.1.4.1.1411.102.89.1.7 | ScalarbosSyslogFacility | read-write | current | The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. |
| 1.3.6.1.4.1.1411.102.89.1.8 | ScalarbosSyslogFacilitySec | read-write | current | The Syslog standard facilities. The facility to be used when sending Syslog messages to the secondary server. |
| 1.3.6.1.4.1.1411.102.89.1.9 | ScalarbosSyslogSeverity | read-write | current | The Syslog standard severities. The severity to be used when sending Syslog messages to primary server. |
| 1.3.6.1.4.1.1411.102.89.1.10 | ScalarbosSyslogSeveritySec | read-write | current | The Syslog standard severities. The severity to be used when sending Syslog messages to the secondary server. |
| 1.3.6.1.4.1.1411.102.89.2 | NodebosSyslogLogs | |||
| 1.3.6.1.4.1.1411.102.89.2.1 | ScalarbosSyslogLogSrvAddr | read-write | current | Specifies the syslog server IP to be used for remote logging. When configured, a new socket will be opened for this address. When the address is changed, the s… |
| 1.3.6.1.4.1.1411.102.89.2.2 | ScalarbosSyslogLogNoLogServer | read-write | current | Closes the socket connection opened for the log server address. |
| 1.3.6.1.4.1.1411.102.89.2.3 | ScalarbosSyslogLogSrvAddrSec | read-write | current | Specifies the secondary syslog server IP to be used for remote logging . When configured, a new socket will be opened for this address. When the address is cha… |
| 1.3.6.1.4.1.1411.102.89.2.4 | ScalarbosSyslogLogNoLogServerSec | read-write | current | Closes the socket connection opened for the secondary log server. |
| 1.3.6.1.4.1.1411.102.96 | Nodebosssl | |||
| 1.3.6.1.4.1.1411.102.96.1 | NodesslGeneralGroup | |||
| 1.3.6.1.4.1.1411.102.96.1.2 | ScalarsslSecureHttpStatus | read-write | current | This object is for enabling or disabling secure HTTP in the system. |
| 1.3.6.1.4.1.1411.102.96.1.3 | ScalarsslPort | read-write | current | This object is to configure the SSL port. |
| 1.3.6.1.4.1.1411.102.96.1.4 | ScalarsslTrace | read-write | current | Set the trace level for SSL. BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 -… |
| 1.3.6.1.4.1.1411.102.96.1.5 | ScalarsslTftpServer | read-write | current | The TFTP server IP address or domain name. |
| 1.3.6.1.4.1.1411.102.96.1.6 | ScalarsslHttpCertName | read-write | current | The https certificate file name to be downloaded. |
| 1.3.6.1.4.1.1411.102.96.1.7 | ScalarsslHttpImportCertAction | read-write | current | This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in sslTftpServer object. Presently we have support for get f… |
| 1.3.6.1.4.1.1411.102.96.1.8 | ScalarsslHttpInitiateCertTransfer | read-write | current | This is an action object to perform the trasfer of the ssl http certificate. |
| 1.3.6.1.4.1.1411.102.96.1.9 | ScalarsslTftpLastActionStatus | read-only | current | This recorded status of the previous TFTP activity. |
| 1.3.6.1.4.1.1411.102.96.2 | NodesslCiphers | |||
| 1.3.6.1.4.1.1411.102.96.2.1 | ScalarsslCipherList | read-write | current | This object is to configure the cipher-suites list. This field is a bit mask, setting a bit indicates that the corresponding cipher-list will be involved in th… |
| 1.3.6.1.4.1.1411.102.96.2.2 | ScalarsslDefaultCipherList | read-write | current | This object is to set the default cipher-suites list in 'sslCipherList'. Setting DefaultCipherList to TRUE would set the following cipher-list for authenticati… |
| 1.3.6.1.4.1.1411.102.97 | Nodebosssh | |||
| 1.3.6.1.4.1.1411.102.97.1 | NodesshGeneralGroup | |||
| 1.3.6.1.4.1.1411.102.97.1.1 | ScalarsshVersionCompatibility | read-write | current | This object is to configure the SSH version compatibility mode. When set to TRUE, both SSH version-1 and SSH Version-2 will be supported. When set to FALSE, SS… |
| 1.3.6.1.4.1.1411.102.97.1.2 | ScalarsshCipherList | read-write | current | This object is to configure the cipher-suites list. This object takes values as bit mask. Setting a bit indicates that the corresponding cipher-list will be us… |
| 1.3.6.1.4.1.1411.102.97.1.3 | ScalarsshMacList | read-write | current | This object is to configure the MAC-list. This object takes values as bit mask. Setting a bit indicates that the corresponding MAC-list will be used for authen… |
| 1.3.6.1.4.1.1411.102.97.2 | ScalarsshPort | read-write | current | The port to be used by the hosts to do the SSH operation. The ssh server must be disabled first and then enabled to effect the port change. |
| 1.3.6.1.4.1.1411.102.97.3 | ScalarsshStatus | read-write | current | This object is for enabling or disabling the SSH access to the system. |
| 1.3.6.1.4.1.1411.102.97.4 | ScalarsshGenerateHostKey | read-write | current | Ssh Host key generation control. Setting this object to TRUE results in the generation of a new host key. This object always returns FALSE when it is read |
| 1.3.6.1.4.1.1411.102.97.5 | ScalarsshGenerateServerKey | read-write | current | Ssh Server key generation control. Setting this object to TRUE results in the generation of a new ssh server key. This object always returns FALSE when it is r… |
| 1.3.6.1.4.1.1411.102.97.6 | ScalarsshServerInterval | read-write | current | The auto regenearation time interval for the ssh server key in hours. Value of 0 indicates that no re-generation of server key is required. |
| 1.3.6.1.4.1.1411.102.102 | Nodeex2500addon | |||
| 1.3.6.1.4.1.1411.102.102.2 | Nodecfa | |||
| 1.3.6.1.4.1.1411.102.102.2.1 | TablebosPortCfgTable | not-accessible | current | The table of port configuration in the new_configuration block. |
| 1.3.6.1.4.1.1411.102.102.2.1.1 | RowbosPortCfgTableEntry | not-accessible | current | A row in the port configuration table in the new_configuration block. |
| 1.3.6.1.4.1.1411.102.102.2.1.1.1 | ColumnbosPortCfgIndx | not-accessible | current | The index of the row in port configurations table. |
| 1.3.6.1.4.1.1411.102.102.2.1.1.2 | ColumnbosPortCfgVlanTag | read-write | current | VLAN tag configured for the port |
| 1.3.6.1.4.1.1411.102.102.2.1.1.3 | ColumnbosPortCfgStateChangeCount | read-only | current | No of Link State changes for the interface |
| 1.3.6.1.4.1.1411.102.102.2.1.1.4 | ColumnbosPortCfgLearning | read-write | current | Enables or disables MAC address learning on the port. |
| 1.3.6.1.4.1.1411.102.102.2.1.1.5 | ColumnbosPortCfgFlooding | read-write | current | Enables or disables flooding on the port. |
| 1.3.6.1.4.1.1411.102.102.2.1.1.6 | ColumnbosPortCfgTagPvid | read-write | current | Disables or Enables VLAN tag persistence. When disabled, the VLAN tag is removed from packets whose VLAN tag matches the port PVID even if the port is a tagged… |
| 1.3.6.1.4.1.1411.102.102.2.1.1.7 | ColumnbosPortCfgMacNotif | read-write | current | Enables or disables MAC address mac notification syslog messages on the port. |
| 1.3.6.1.4.1.1411.102.102.2.2 | TablebosPortStatsClearTable | not-accessible | current | The table to clear port statistics. |
| 1.3.6.1.4.1.1411.102.102.2.2.1 | RowbosPortStatsClearTableEntry | not-accessible | current | A row in the port stats clear table. |
| 1.3.6.1.4.1.1411.102.102.2.2.1.1 | ColumnbosPortStatsIndx | read-only | current | The interface index by which the row in this table is identified. |
| 1.3.6.1.4.1.1411.102.102.2.2.1.2 | ColumnbosPortStatsClear | read-write | current | Setting this value to clear(2) clears the stats for this port. |
| 1.3.6.1.4.1.1411.102.102.2.3 | ScalarbosClearPortsStats | read-write | current | Setting this to clear(2) results in clearing the statistics for all ports. |
| 1.3.6.1.4.1.1411.102.102.2.4 | TablebosPortStatsTable | not-accessible | current | The table to get port statistics. |
| 1.3.6.1.4.1.1411.102.102.2.4.1 | RowbosPortStatsTableEntry | not-accessible | current | A row in the port stats clear table. |
| 1.3.6.1.4.1.1411.102.102.2.4.1.1 | ColumnbosPortIndex | read-only | current | The interface index by which the row in this table is identified. |
| 1.3.6.1.4.1.1411.102.102.2.4.1.2 | ColumnbosPortUndersizePkts | read-only | current | The count of undersized frames (<64 bytes) received on the particular interface specified by bosPortIndex. |
| 1.3.6.1.4.1.1411.102.102.5 | Nodeigs | |||
| 1.3.6.1.4.1.1411.102.102.5.2 | NodeigmpV3SnoopCfg | |||
| 1.3.6.1.4.1.1411.102.102.5.2.1 | ScalarigmpV3SnoopNewCfgSources | read-write | current | Number of sources to snoop in a group record in new config. |
| 1.3.6.1.4.1.1411.102.102.5.2.2 | ScalarigmpV3SnoopNewCfgEnaDis | read-write | current | Set Enable/Disable of IGMP V3 Snooping. |
| 1.3.6.1.4.1.1411.102.102.5.2.3 | ScalarigmpV3SnoopNewCfgExcludeEnaDis | read-write | current | Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping. |
| 1.3.6.1.4.1.1411.102.102.5.2.4 | ScalarigmpV3SnoopNewCfgV1V2EnaDis | read-write | current | Set Enable/Disable of IGMP V1/V2 Report Snooping. |
| 1.3.6.1.4.1.1411.102.102.5.3 | NodeigmpSnoopCfg | |||
| 1.3.6.1.4.1.1411.102.102.5.3.2 | ScalarigmpSnoopStatsClear | read-write | current | Clear IGMP snoop statistics. Read on this object always returns ok. Setting ok has no effect. Setting value clear reset the snoop statistics |
| 1.3.6.1.4.1.1411.102.102.5.3.3 | ScalarigmpSnoopGroupClear | read-write | current | Clear the IGMP Group registrations. Read on this object always returns ok.Setting ok has no effect. Setting value clear reset the snoop statistics |
| 1.3.6.1.4.1.1411.102.102.5.3.4 | ScalarigmpSnoopMrouterClear | read-write | current | Clear the IGMP Mrouters learnt. Read on this object always returns ok.Setting ok has no effect. Setting value clear reset the snoop statistics |
| 1.3.6.1.4.1.1411.102.102.5.3.5 | TablebosSnoopVlanStatsClearTable | not-accessible | current | The table contains the objects for clearing the statistics. |
| 1.3.6.1.4.1.1411.102.102.5.3.5.1 | RowbosSnoopVlanStatsClearEntry | not-accessible | current | Contains the objects for clearing the VLAN statistics. |
| 1.3.6.1.4.1.1411.102.102.5.3.5.1.1 | ColumnbosSnoopVlanStatsClearVlanId | not-accessible | current | The VLAN ID for which statistics to be cleared |
| 1.3.6.1.4.1.1411.102.102.5.3.5.1.2 | ColumnbosSnoopVlanStatsClear | read-write | current | Clear IGMP snoop statistics on a particular VLAN. Read on this object always returns ok.Setting ok has no effect. Setting value clear reset the snoop statistics |
| 1.3.6.1.4.1.1411.102.102.5.3.6 | ScalarigmpSnoopFloodStatus | read-write | current | This object contols the flooding of unknown IPMC packets. If enabled, IPMC packets are flooded on vlan members.Else, unknown IPMC packets will not be flooded |
| 1.3.6.1.4.1.1411.102.102.5.3.7 | TablebosigmpSnoopVlanConfigTable | not-accessible | current | The table contains the configurations over snoop enabled vlans |
| 1.3.6.1.4.1.1411.102.102.5.3.7.1 | RowbosigmpSnoopVlanConfigEntry | not-accessible | current | Contains the objects for configuring params for snoop enabled vlan. |
| 1.3.6.1.4.1.1411.102.102.5.3.7.1.1 | ColumnbosSnoopVlanConfigVlanId | not-accessible | current | The VLAN ID for which snoop configuration to be done |
| 1.3.6.1.4.1.1411.102.102.5.3.7.1.2 | ColumnbosSnoopVlanConfigSrcIp | read-write | current | The source ip for GSQ proxy in this vlan |
| 1.3.6.1.4.1.1411.102.102.5.4 | NodebosSnoopInfo | |||
| 1.3.6.1.4.1.1411.102.102.5.4.1 | TablebosSnoopInfoTable | not-accessible | current | The table of IGMP/MLD group membership information. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1 | RowbosSnoopInfoEntry | not-accessible | current | Information about an IGMP/MLD group member . |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.1 | ColumnbosSnoopInfoAddressType | not-accessible | current | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.2 | ColumnbosSnoopInfoVlanId | not-accessible | current | The VLAN ID for this IGMP/MLD group. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.3 | ColumnbosSnoopInfoGroupAddress | not-accessible | current | The IP address of the IGMP/MLD group. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.4 | ColumnbosSnoopInfoSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.5 | ColumnbosSnoopInfoPortNum | not-accessible | current | The downstream member port |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.6 | ColumnbosSnoopInfoVersion | read-only | current | The Version of IGMP host. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.7 | ColumnbosSnoopInfoExpires | read-only | current | The expiration time for this host. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.8 | ColumnbosSnoopInfoMode | read-only | current | The IGMPv3 filter-mode for this host. |
| 1.3.6.1.4.1.1411.102.102.5.4.1.1.9 | ColumnbosSnoopInfoFwd | read-only | current | The IGMPv3 forwarding for this source/group IP for this host. |
| 1.3.6.1.4.1.1411.102.102.5.4.2 | TablebosSnoopMrouterInfoTable | not-accessible | current | The table contains the information learnt on a mrouter port |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1 | RowbosSnoopMrouterInfoEntry | not-accessible | current | Information learnt on a mrouter port. |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.1 | ColumnbosSnoopMrouterInfoVlanId | not-accessible | current | The VLAN on whcih the Mrouter port presents. |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.2 | ColumnbosSnoopMrouterInfoPortNum | not-accessible | current | The port at which Mrouter presents |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.3 | ColumnbosSnoopMrouterInfoExpires | read-only | current | The expiration time for this mrouter port |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.4 | ColumnbosSnoopMrouterInfoResponseTime | read-only | current | The response time recorded from the Query message |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.5 | ColumnbosSnoopMrouterInfoQRV | read-only | current | QRV recorded from the IGMPv3 Query Message |
| 1.3.6.1.4.1.1411.102.102.5.4.2.1.6 | ColumnbosSnoopMrouterInfoQQIC | read-only | current | QQIC recorded from the IGMPv3 Query Message |
| 1.3.6.1.4.1.1411.102.102.6 | Nodepnac | |||
| 1.3.6.1.4.1.1411.102.102.6.1 | Nodedot1x | |||
| 1.3.6.1.4.1.1411.102.102.6.1.1 | Scalardot1xNewStatus | read-write | current | Dot1x status |
| 1.3.6.1.4.1.1411.102.102.6.1.2 | Nodedot1xNewCfgGlobalTable | |||
| 1.3.6.1.4.1.1411.102.102.6.1.2.3 | Scalardot1xNewCfgGlobalMode | read-write | current | Authentication Mode |
| 1.3.6.1.4.1.1411.102.102.6.1.2.4 | Scalardot1xNewCfgGlobalQtPeriod | read-write | current | Quiet Period (0..65535) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.5 | Scalardot1xNewCfgGlobalTxPeriod | read-write | current | Tx Period (1..65535) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.6 | Scalardot1xNewCfgGlobalSupTmout | read-write | current | Supplicand timeout (1..65535) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.7 | Scalardot1xNewCfgGlobalSrvTmout | read-write | current | Server timeout (1..65535) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.8 | Scalardot1xNewCfgGlobalMaxRq | read-write | current | Maximum number of requests (1..10) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.9 | Scalardot1xNewCfgGlobalRaPeriod | read-write | current | Reauthentication period (1..604800) |
| 1.3.6.1.4.1.1411.102.102.6.1.2.10 | Scalardot1xNewCfgGlobalReAuth | read-write | current | Reauthentication status |
| 1.3.6.1.4.1.1411.102.102.6.1.2.11 | Scalardot1xNewCfgGlobalDefault | read-write | current | Restore default 802.1x configuration |
| 1.3.6.1.4.1.1411.102.102.6.1.3 | Tabledot1xClearStatsTable | not-accessible | current | Clear the dot1x authenticator statistics |
| 1.3.6.1.4.1.1411.102.102.6.1.3.1 | Rowdot1xClearStatsEntry | not-accessible | current | Clear Authenticator PAE statistics |
| 1.3.6.1.4.1.1411.102.102.6.1.3.1.1 | Columndot1xPortNumber | not-accessible | current | The interface index for the dot1xClearStatsTable |
| 1.3.6.1.4.1.1411.102.102.6.1.3.1.2 | Columndot1xClearStats | read-create | current | When set to clear the dot1x Authenticator Statistics Entry for the given port are cleared. Always returns other on get. |
| 1.3.6.1.4.1.1411.102.102.7 | Nodesys | |||
| 1.3.6.1.4.1.1411.102.102.7.1 | ScalaragNewCfgIdleCLITimeout | read-write | current | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.1411.102.102.7.2 | ScalaragImageForNextReset | read-write | current | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.1411.102.102.7.3 | TabletacacsCmdAuthorAcctStatusTable | not-accessible | current | A table contains Status of Cli command Authorization and Accounting using TACACS+ AAA protocol.Status can be enabled or disabled for specific privilege level c… |
| 1.3.6.1.4.1.1411.102.102.7.3.1 | RowtacacsCmdAuthorAcctStatusEntry | not-accessible | current | TACACS+ Cli command Authorization and Accounting Status. |
| 1.3.6.1.4.1.1411.102.102.7.3.1.1 | ColumntacacsCmdPrivLevel | not-accessible | current | Privilege level associated with the CLI command. |
| 1.3.6.1.4.1.1411.102.102.7.3.1.2 | ColumntacacsCmdAuthorstatus | read-write | current | If command authorization status is true then all commands with specified privilege level will be sent to tacacs server for authorization. |
| 1.3.6.1.4.1.1411.102.102.7.3.1.3 | ColumntacacsCmdAcctStatus | read-write | current | If command accounting status is ture then all commands with specified privilege level will be sent to tacacs server for accounting. |
| 1.3.6.1.4.1.1411.102.102.7.6 | ScalarsystemNotice1 | read-write | current | This object allow user to save a text string that would be displayed BEFORE the password prompt is presented |
| 1.3.6.1.4.1.1411.102.102.7.7 | ScalarsystemNotice2 | read-write | current | This object allow user to save a text string that would be displayed BEFORE the password prompt is presented |
| 1.3.6.1.4.1.1411.102.102.7.8 | ScalarsystemNotice3 | read-write | current | This object allow user to save a text string that would be displayed BEFORE the password prompt is presented |
| 1.3.6.1.4.1.1411.102.102.7.9 | ScalarsystemNotice4 | read-write | current | This object allow user to save a text string that would be displayed BEFORE the password prompt is presented |
| 1.3.6.1.4.1.1411.102.102.7.10 | ScalarsystemNotice5 | read-write | current | This object allow user to save a text string that would be displayed BEFORE the password prompt is presented |
| 1.3.6.1.4.1.1411.102.102.7.11 | ScalarsystemBanner | read-write | current | This object stores the display banner |
| 1.3.6.1.4.1.1411.102.102.7.12 | ScalarsysAccessUserBbi | read-write | current | This object is for enabling or disabling the Access UserBbi |
| 1.3.6.1.4.1.1411.102.102.7.13 | ScalarsysCurCfgHprompt | read-write | current | Current status of hprompt. |
| 1.3.6.1.4.1.1411.102.102.7.14 | TablebosSyslogTable | not-accessible | current | The table of Syslog configuration. |
| 1.3.6.1.4.1.1411.102.102.7.14.1 | RowbosSyslogTableEntry | not-accessible | current | Information about a particular module's Syslog configuration. |
| 1.3.6.1.4.1.1411.102.102.7.14.1.1 | ColumnbosSyslogModuleIndex | read-only | current | The identifier of a particular Syslog module. Module id assigned to various modules are defined below SYSLOG_ID (1), STG_ID(2), HOTLINKS_ID(3), PORTCHANNEL_ID(… |
| 1.3.6.1.4.1.1411.102.102.7.14.1.2 | ColumnbosSyslogStatus | read-write | current | Enables or disables syslog messages |
| 1.3.6.1.4.1.1411.102.102.8 | Nodepmirr | |||
| 1.3.6.1.4.1.1411.102.102.8.1 | ScalarpmNewCfgPortMirrState | read-write | current | The state of port-based port mirroring. |
| 1.3.6.1.4.1.1411.102.102.8.2 | TablepmNewCfgPortMonitorTable | not-accessible | current | The table of monitoring ports. |
| 1.3.6.1.4.1.1411.102.102.8.2.1 | RowpmNewCfgPortMonitorEntry | not-accessible | current | A row in the monitoring port table. |
| 1.3.6.1.4.1.1411.102.102.8.2.1.1 | ColumnpmNewCfgPmirrMoniPortIndex | not-accessible | current | The monitoring port number. |
| 1.3.6.1.4.1.1411.102.102.8.2.1.2 | ColumnpmNewCfgPmirrMirrPortIndex | not-accessible | current | The mirrored port number |
| 1.3.6.1.4.1.1411.102.102.8.2.1.3 | ColumnpmNewCfgPmirrDirection | read-create | current | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.1411.102.102.8.2.1.4 | ColumnpmNewCfgPmirrDelete | read-create | current | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.1411.102.102.9 | Nodestp | |||
| 1.3.6.1.4.1.1411.102.102.9.1 | TablebosMstMstiInstanceTable | not-accessible | current | Table containing Spanning tree instance information |
| 1.3.6.1.4.1.1411.102.102.9.1.1 | RowbosMstMstiInstanceEntry | not-accessible | current | Entry containing the Spanning Tree Instance information |
| 1.3.6.1.4.1.1411.102.102.9.1.1.2 | ColumnbosMstMstiForceState | read-write | current | Enables/Diables spanning tree on the all the ports under that instance |
| 1.3.6.1.4.1.1411.102.102.9.1.1.3 | ColumnbosMstMstiForcePortStateBmp | read-only | current | Enables/Diables spanning tree on the all the ports under that instance |
| 1.3.6.1.4.1.1411.102.102.9.2 | TablebosStgCfgTable | not-accessible | current | The table of Spanning Tree Groups configuration. |
| 1.3.6.1.4.1.1411.102.102.9.2.1 | RowbosStgCfgTableEntry | not-accessible | current | Information about a particular Spanning Tree Group configuration. |
| 1.3.6.1.4.1.1411.102.102.9.2.1.1 | ColumnbosStgCfgIndex | read-only | current | The identifier of a particular Spanning Tree Group. value 0 signifies MSTP CIST |
| 1.3.6.1.4.1.1411.102.102.9.2.1.2 | ColumnbosStgCfgDefaultCfg | read-write | current | Setting the value to default-config(1) will reset Spanning-tree bridge and port parameters to their default values.The object always returns default-config (1). |
| 1.3.6.1.4.1.1411.102.102.9.3 | ScalarbosMstCistDefaultCfg | read-write | current | Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not … |
| 1.3.6.1.4.1.1411.102.102.9.4 | ScalarbosStpMode | read-write | current | This attribute is used to set the spanning tree mode. The default value of this is attribute is rstp |
| 1.3.6.1.4.1.1411.102.102.9.5 | TablebosRstPortExtTable | not-accessible | current | This is a table that is an extension to the dot1dStpExtPortTable. This contains object(s) that are Port-based. |
| 1.3.6.1.4.1.1411.102.102.9.5.1 | RowbosRstPortExtEntry | not-accessible | current | Each entry in this table is for each port present in the system. This table is indexed by the bosRstPort. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.1 | ColumnbosRstPort | not-accessible | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.2 | ColumnbosRstPortRole | read-only | current | This indicates the current Port Role assumed by this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.3 | ColumnbosRstPortOperVersion | read-only | current | This indicates whether the Port is operationally in the Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting RST BPDUs or Config/TCN BPD… |
| 1.3.6.1.4.1.1411.102.102.9.5.1.4 | ColumnbosRstPortRoleTransSmState | read-only | current | This indicates the current state of the Port Role Transition state machine. This object will hold the value 'init' when the Port Role Transition state machine … |
| 1.3.6.1.4.1.1411.102.102.9.5.1.5 | ColumnbosRstPortStateTransSmState | read-only | current | This indicates the current state of the Port State Transition state machine. This object will hold the value 'discarding' when the Port State Transition state … |
| 1.3.6.1.4.1.1411.102.102.9.5.1.6 | ColumnbosRstPortRxRstBpduCount | read-only | current | The number of RST BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.7 | ColumnbosRstPortRxConfigBpduCount | read-only | current | The number of Config BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.8 | ColumnbosRstPortRxTcnBpduCount | read-only | current | The number of TCN BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.9 | ColumnbosRstPortTxRstBpduCount | read-only | current | The number of RST BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.10 | ColumnbosRstPortTxConfigBpduCount | read-only | current | The number of Config BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.11 | ColumnbosRstPortTxTcnBpduCount | read-only | current | The number of TCN BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.12 | ColumnbosRstPortInvalidRstBpduRxCount | read-only | current | The number of invalid RSTP BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.13 | ColumnbosRstPortInvalidConfigBpduRxCount | read-only | current | The number of invalid Configuration BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.14 | ColumnbosRstPortInvalidTcnBpduRxCount | read-only | current | The number of invalid TCN BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.1411.102.102.9.5.1.15 | ColumnbosRstPortProtocolMigrationCount | read-only | current | The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP. A Trap is generated on… |
| 1.3.6.1.4.1.1411.102.102.9.5.1.16 | ColumnbosRstPortBpduGuard | read-write | current | This parameter when TRUE(1) indicates that BpduGuard of a port enabled and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.1411.102.102.9.6 | TablebosMstCistPortTable | not-accessible | current | This table contains Common Spanning Tree Port Information. |
| 1.3.6.1.4.1.1411.102.102.9.6.1 | RowbosMstCistPortEntry | not-accessible | current | A list of information maintained by every port for Common Spanning tree. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.1 | ColumnbosMstCistPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.2 | ColumnbosMstCistPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the CIST Root which include this port. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.3 | ColumnbosMstCistPortPriority | read-write | current | The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are … |
| 1.3.6.1.4.1.1411.102.102.9.6.1.4 | ColumnbosMstCistPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.5 | ColumnbosMstCistPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.6 | ColumnbosMstCistPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.7 | ColumnbosMstCistPortAdminP2P | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.1411.102.102.9.6.1.8 | ColumnbosMstCistPortOperP2P | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.1411.102.102.9.6.1.9 | ColumnbosMstCistPortAdminEdgeStatus | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1411.102.102.9.6.1.11 | ColumnbosMstCistPortProtocolMigration | read-write | current | Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transm… |
| 1.3.6.1.4.1.1411.102.102.9.6.1.12 | ColumnbosMstCistPortState | read-only | current | Current state of the Port as defined by the Common spanning tree protocol. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.13 | ColumnbosMstCistForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's stat… |
| 1.3.6.1.4.1.1411.102.102.9.6.1.14 | ColumnbosMstCistPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.15 | ColumnbosMstCistPortRegionalRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.16 | ColumnbosMstCistPortRegionalPathCost | read-only | current | The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.17 | ColumnbosMstCistCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.18 | ColumnbosMstCistPortHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of a second. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.19 | ColumnbosMstCistPortAutoEdgeStatus | read-write | current | This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.20 | ColumnbosMstCistPortPvstProtectionStatus | read-write | current | This parameter when TRUE(1) indicates that PVST Protection of a port is ON and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.1411.102.102.9.6.1.21 | ColumnbosMstCistPortBpduGuard | read-write | current | This parameter when TRUE(1) indicates that BpduGuard of a port is enabled and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.1411.102.102.10 | Nodeip | |||
| 1.3.6.1.4.1.1411.102.102.10.2 | TablebosIpDefaultGatewayTable | not-accessible | current | The table of IP default gateways |
| 1.3.6.1.4.1.1411.102.102.10.2.1 | RowbosIpDefaultGatewayEntry | not-accessible | current | A row in the default gatway IP table. |
| 1.3.6.1.4.1.1411.102.102.10.2.1.1 | ColumnbosIpDefaultGatewayIndex | not-accessible | current | The default gateway index. Currently only one default gateway is supported.So the value of this attribute is always 1. |
| 1.3.6.1.4.1.1411.102.102.10.2.1.2 | ColumnbosIpDefaultGatewayIpAddr | read-write | current | The default gateway IP address. |
| 1.3.6.1.4.1.1411.102.102.10.2.1.3 | ColumnbosIpDefaultGatewayStatus | read-write | current | The default gateway administrative status. |
| 1.3.6.1.4.1.1411.102.102.10.2.1.4 | ColumnbosIpDefaultGatewayState | read-only | current | The default gateway operational status. This object indicates whether the gateway is reachable or not. |
| 1.3.6.1.4.1.1411.102.102.10.2.1.5 | ColumnbosIpDefaultGatewayRowStatus | read-write | current | The status of a row in the IP default gateway table. By 'bosIpDefaultGatewayRowStatus' new entries can be created and the existing entries can be removed from … |
| 1.3.6.1.4.1.1411.102.102.11 | Nodesnmpv3 | |||
| 1.3.6.1.4.1.1411.102.102.11.1 | NodebosUsmUser | |||
| 1.3.6.1.4.1.1411.102.102.11.1.1 | TablebosUsmUserTable | not-accessible | current | The table of users configured in the SNMP engine's Local Configuration Datastore (LCD). To create a new user (i.e., to instantiate a new conceptual row in this… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1 | RowbosUsmUserEntry | not-accessible | current | A user configured in the SNMP engine's Local Configuration Datastore (LCD) for the User-based Security Model. |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.1 | ColumnbosUsmUserTableIndex | not-accessible | current | USM user table index . |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.2 | ColumnbosUsmUserName | read-write | current | A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.3 | ColumnbosUsmUserSecurityName | read-only | current | A human readable string representing the user in Security Model independent format. The default transformation of the User-based Security Model dependent secur… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.4 | ColumnbosUsmUserCloneFrom | read-create | current | A pointer to another conceptual row in this usmUserTable. The user in this other conceptual row is called the clone-from user. When a new user is created (i.e.… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.5 | ColumnbosUsmUserAuthProtocol | read-create | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type … |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.6 | ColumnbosUsmUserAuthKeyChange | read-create | current | An object, which when modified, causes the secret authentication key used for messages sent on behalf of this user to/from the SNMP engine identified by usmUse… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.7 | ColumnbosUsmUserOwnAuthKeyChange | read-create | current | Behaves exactly as usmUserAuthKeyChange, with one notable difference: in order for the set operation to succeed, the usmUserName of the operation requester mus… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.8 | ColumnbosUsmUserPrivProtocol | read-create | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if s… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.9 | ColumnbosUsmUserPrivKeyChange | read-create | current | An object, which when modified, causes the secret encryption key used for messages sent on behalf of this user to/from the SNMP engine identified by usmUserEng… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.10 | ColumnbosUsmUserOwnPrivKeyChange | read-create | current | Behaves exactly as usmUserPrivKeyChange, with one notable difference: in order for the Set operation to succeed, the usmUserName of the operation requester mus… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.11 | ColumnbosUsmUserPublic | read-create | current | A publicly-readable value which can be written as part of the procedure for changing a user's secret authentication and/or privacy key, and later read to deter… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.12 | ColumnbosUsmUserStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' must allow write-access at a minimum to: - usmUserAuthKeyChange, usmUser… |
| 1.3.6.1.4.1.1411.102.102.11.1.1.1.13 | ColumnbosUsmUserStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the us… |
| 1.3.6.1.4.1.1411.102.102.11.2 | NodebosVacmObjects | |||
| 1.3.6.1.4.1.1411.102.102.11.2.1 | TablebosVacmSecurityToGroupTable | not-accessible | current | This table maps a combination of securityModel and securityName into a groupName which is used to define an access control policy for a group of principals. |
| 1.3.6.1.4.1.1411.102.102.11.2.1.1 | RowbosVacmSecurityToGroupEntry | not-accessible | current | An entry in this table maps the combination of a securityModel and securityName into a groupName. |
| 1.3.6.1.4.1.1411.102.102.11.2.1.1.1 | ColumnbosVacmSecurityToGroupTableIndex | not-accessible | current | VacmSecurityToGroupTable index . |
| 1.3.6.1.4.1.1411.102.102.11.2.1.1.2 | ColumnbosVacmGroupName | read-create | current | The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAcces… |
| 1.3.6.1.4.1.1411.102.102.11.2.1.1.3 | ColumnbosVacmSecurityToGroupStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.2.1.1.4 | ColumnbosVacmSecurityToGroupStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the va… |
| 1.3.6.1.4.1.1411.102.102.11.2.2 | TablebosVacmAccessTable | not-accessible | current | The table of access rights for groups. Each entry is indexed by a groupName, a contextPrefix, a securityModel and a securityLevel. To determine whether access … |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1 | RowbosVacmAccessEntry | not-accessible | current | An access right configured in the Local Configuration Datastore (LCD) authorizing access to an SNMP context. Entries in this table can use an instance value fo… |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.1 | ColumnbosVacmAccessTableIndex | not-accessible | current | Vacm Access table index . |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.2 | ColumnbosVacmAccessContextMatch | read-create | current | If the value of this object is exact(1), then all rows where the contextName exactly matches vacmAccessContextPrefix are selected. If the value of this object … |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.3 | ColumnbosVacmAccessReadViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB vie… |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.4 | ColumnbosVacmAccessWriteViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB vi… |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.5 | ColumnbosVacmAccessNotifyViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The ident… |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.6 | ColumnbosVacmAccessStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.2.2.1.7 | ColumnbosVacmAccessStatus | read-create | current | The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row … |
| 1.3.6.1.4.1.1411.102.102.11.2.3 | TablebosVacmViewTreeFamilyTable | not-accessible | current | Locally held information about families of subtrees within MIB views. Each MIB view is defined by two sets of view subtrees: - the included view subtrees, and … |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1 | RowbosVacmViewTreeFamilyEntry | not-accessible | current | Information on a particular family of view subtrees included in or excluded from a particular SNMP context's MIB view. Implementations must not restrict the nu… |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1.1 | ColumnbosVacmViewTreeFamilyTableIndex | not-accessible | current | Vacm View Tree Family Index |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1.2 | ColumnbosVacmViewTreeFamilyMask | read-create | current | The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1.3 | ColumnbosVacmViewTreeFamilyType | read-create | current | Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or … |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1.4 | ColumnbosVacmViewTreeFamilyStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.2.3.1.5 | ColumnbosVacmViewTreeFamilyStatus | read-create | current | |
| 1.3.6.1.4.1.1411.102.102.11.3 | NodebosSnmpTargetObjects | |||
| 1.3.6.1.4.1.1411.102.102.11.3.1 | TablebossnmpTargetAddrTable | not-accessible | current | A table of transport addresses to be used in the generation of SNMP messages. |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1 | RowbosSnmpTargetAddrEntry | not-accessible | current | A transport address to be used in the generation of SNMP operations. Entries in the snmpTargetAddrTable are created and deleted using the snmpTargetAddrRowStat… |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.1 | ColumnbossnmpTargetTableIndex | not-accessible | current | Target table index . |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.2 | ColumnbossnmpTargetAddrTDomain | read-create | current | This object indicates the transport type of the address contained in the snmpTargetAddrTAddress object. |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.3 | ColumnbossnmpTargetAddrTAddress | read-create | current | This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object. |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.4 | ColumnbossnmpTargetAddrTimeout | read-create | current | This object should reflect the expected maximum round trip time for communicating with the transport address defined by this row. When a message is sent to thi… |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.5 | ColumnbossnmpTargetAddrRetryCount | read-create | current | This object specifies a default number of retries to be attempted when a response is not received for a generated message. An application may provide its own r… |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.6 | ColumnbossnmpTargetAddrTagList | read-create | current | This object contains a list of tag values which are used to select target addresses for a particular operation. |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.7 | ColumnbossnmpTargetAddrParams | read-create | current | The value of this object identifies an entry in the snmpTargetParamsTable. The identified entry contains SNMP parameters to be used when generating messages to… |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.8 | ColumnbossnmpTargetAddrStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.3.1.1.9 | ColumnbossnmpTargetAddrRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.1411.102.102.11.3.2 | TablebosSnmpTargetParamsTable | not-accessible | current | A table of SNMP target information to be used in the generation of SNMP messages. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1 | RowbosSnmpTargetParamsEntry | not-accessible | current | A set of SNMP target information. Entries in the snmpTargetParamsTable are created and deleted using the snmpTargetParamsRowStatus object. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.1 | ColumnbosSnmpTargetParamsTableIndex | not-accessible | current | Target Params table index . |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.2 | ColumnbosSnmpTargetParamsMPModel | read-create | current | The Message Processing Model to be used when generating SNMP messages using this entry. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.3 | ColumnbosSnmpTargetParamsSecurityModel | read-create | current | The Security Model to be used when generating SNMP messages using this entry. An implementation may choose to return an inconsistentValue error if an attempt i… |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.4 | ColumnbosSnmpTargetParamsSecurityName | read-create | current | The securityName which identifies the Principal on whose behalf SNMP messages will be generated using this entry. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.5 | ColumnbosSnmpTargetParamsSecurityLevel | read-create | current | The Level of Security to be used when generating SNMP messages using this entry. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.6 | ColumnbosSnmpTargetParamsStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.3.2.1.7 | ColumnbosSnmpTargetParamsRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.1411.102.102.11.4 | NodebosSnmpNotifyObjects | |||
| 1.3.6.1.4.1.1411.102.102.11.4.1 | TablebosSnmpNotifyTable | not-accessible | current | This table is used to select management targets which should receive notifications, as well as the type of notification which should be sent to each selected m… |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1 | RowbosSnmpNotifyEntry | not-accessible | current | An entry in this table selects a set of management targets which should receive notifications, as well as the type of notification which should be sent to each… |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1.1 | ColumnbosSnmpNotifyTableIndex | not-accessible | current | Notify table index . |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1.2 | ColumnbosSnmpNotifyTag | read-create | current | This object contains a single tag value which is used to select entries in the snmpTargetAddrTable. Any entry in the snmpTargetAddrTable which contains a tag v… |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1.3 | ColumnbosSnmpNotifyType | read-create | current | This object determines the type of notification to be generated for entries in the snmpTargetAddrTable selected by the corresponding instance of snmpNotifyTag.… |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1.4 | ColumnbosSnmpNotifyStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.1411.102.102.11.4.1.1.5 | ColumnbosSnmpNotifyRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). |
| 1.3.6.1.4.1.1411.102.102.11.5 | NodebosSnmpCommunityObjects | |||
| 1.3.6.1.4.1.1411.102.102.11.5.1 | TablebosSnmpCommunityTable | not-accessible | current | The table of community strings configured in the SNMP engine's Local Configuration Datastore (LCD). |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1 | RowbosSnmpCommunityEntry | not-accessible | current | Information about a particular community string. |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.1 | ColumnbosSnmpCommunityTableIndex | not-accessible | current | Community Table Index. |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.2 | ColumnbosSnmpCommunityName | read-create | current | The community string for which a row in this table represents a configuration. There is no SIZE constraint specified for this object because RFC 1157 does not … |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.3 | ColumnbosSnmpCommunitySecurityName | read-create | current | A human readable string representing the corresponding value of snmpCommunityName in a Security Model independent format. |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.4 | ColumnbosSnmpCommunityContextEngineID | read-create | current | The contextEngineID indicating the location of the context in which management information is accessed when using the community string specified by the corresp… |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.5 | ColumnbosSnmpCommunityContextName | read-create | current | The context in which management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.6 | ColumnbosSnmpCommunityTransportTag | read-create | current | This object specifies a set of transport endpoints which are used in two ways: - to specify the transport endpoints from which an SNMP entity will accept manag… |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.7 | ColumnbosSnmpCommunityStorageType | read-create | current | The storage type for this conceptual row in the snmpCommunityTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar ob… |
| 1.3.6.1.4.1.1411.102.102.11.5.1.1.8 | ColumnbosSnmpCommunityStatus | read-create | current | The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding column… |
| 1.3.6.1.4.1.1411.102.102.12 | Nodeqos | |||
| 1.3.6.1.4.1.1411.102.102.12.1 | TablebosNewCfgPriorityCoSTable | not-accessible | current | The table of Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.1411.102.102.12.1.1 | RowbosNewCfgPriorityCoSEntry | not-accessible | current | Information about a particular Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.1411.102.102.12.1.1.1 | ColumnbosNewCfgPriorityIndex | read-only | current | Frame priority Number |
| 1.3.6.1.4.1.1411.102.102.12.1.1.2 | ColumnbosNewCfgPriorityCoSq | read-write | current | CoSq for a Frame Priority Should be between 0 and 7 |
| 1.3.6.1.4.1.1411.102.102.12.4 | TablebosNewCfgDscpTable | not-accessible | current | The table of Dscp to New Dscp/802.1p priority configuration. |
| 1.3.6.1.4.1.1411.102.102.12.4.1 | RowbosNewCfgDscpEntry | not-accessible | current | Information about a particular Dscp to New Dscp/802.1p priority configuration |
| 1.3.6.1.4.1.1411.102.102.12.4.1.1 | ColumnbosNewCfgDscpIndex | read-only | current | Dscp value |
| 1.3.6.1.4.1.1411.102.102.12.4.1.4 | ColumnbosNewCfgMapCosQ | read-write | current | Map 802.1p value |
| 1.3.6.1.4.1.1411.102.102.12.5 | ScalarbosNewCfgDscpState | read-write | current | Enable/disable of DSCP globally in system (on all ports). When Enable, bosNewCfgDscpTable entry (DSCP to COSQ mapping) will be functional and DSCP value will b… |
| 1.3.6.1.4.1.1411.102.102.13 | Nodefdb | |||
| 1.3.6.1.4.1.1411.102.102.13.1 | ScalarfdbClear | read-write | current | Setting this value to clear-master(2) clears the entire master FDB, Setting this value to clear-static(3) clears the entire static FDB. |
| 1.3.6.1.4.1.1411.102.102.13.2 | ScalarfdbStatsCurrent | read-only | current | Current number of entries in the Forwarding Database. |
| 1.3.6.1.4.1.1411.102.102.13.3 | ScalarfdbStatsHiwat | read-only | current | Highest number of entries recorded at any given time in the Forwarding Database. |
| 1.3.6.1.4.1.1411.102.102.13.4 | ScalarfdbStatsClear | read-write | current | Clear FDB statistics |
| 1.3.6.1.4.1.1411.102.102.13.5 | TablefdbTable | not-accessible | current | The table of FDB entries. |
| 1.3.6.1.4.1.1411.102.102.13.5.1 | RowfdbEntry | not-accessible | current | A row in the FDB table |
| 1.3.6.1.4.1.1411.102.102.13.5.1.1 | ColumnfdbVlan | not-accessible | current | The VLAN ID for the FDB entry. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.2 | ColumnfdbMacAddr | not-accessible | current | The MAC address for the FDB entry. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.3 | ColumnfdbMacAddrStr | read-only | current | The MAC address in hex format for the FDB entry.This node is added for display purpose. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.4 | ColumnfdbVlanId | read-only | current | The VLAN ID for the FDB entry. This node is added for display purpose. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.5 | ColumnfdbSrcPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A… |
| 1.3.6.1.4.1.1411.102.102.13.5.1.6 | ColumnfdbSrcTrunk | read-only | current | Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.… |
| 1.3.6.1.4.1.1411.102.102.13.5.1.7 | ColumnfdbState | read-only | current | The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de… |
| 1.3.6.1.4.1.1411.102.102.13.5.1.8 | ColumnfdbRefSps | read-only | current | The referenced SPs associated with this FDB entry. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.9 | ColumnfdbLearnedPort | read-only | current | The learned port associated with this FDB entry. |
| 1.3.6.1.4.1.1411.102.102.13.5.1.10 | ColumnfdbStatus | read-only | current | '1' if it is permanent '0' if it is not permanent |
| 1.3.6.1.4.1.1411.102.102.13.5.1.11 | ColumnfdbClearMac | read-write | current | Setting this value to clear(2) clears the corresponding table entry in FDB. |
| 1.3.6.1.4.1.1411.102.102.13.6 | ScalarfdbDisableAging | read-write | current | When set to true aging of fdb table entries is disabled. '1' Fdb aging is disabled '0' Fdb aging is enabled |
| 1.3.6.1.4.1.1411.102.102.13.7 | TablefdbNewCfgStaticTable | not-accessible | current | The table of FDB static entries. |
| 1.3.6.1.4.1.1411.102.102.13.7.1 | RowfdbNewCfgStaticEntry | not-accessible | current | A row in the fdb table. |
| 1.3.6.1.4.1.1411.102.102.13.7.1.1 | ColumnfdbNewCfgEntryIndex | read-only | current | The fdb entry index |
| 1.3.6.1.4.1.1411.102.102.13.7.1.2 | ColumnfdbNewCfgAddVlan | read-write | current | Add vlan for fdb entry |
| 1.3.6.1.4.1.1411.102.102.13.7.1.3 | ColumnfdbNewCfgAddPort | read-write | current | The MAC address port number. |
| 1.3.6.1.4.1.1411.102.102.13.7.1.4 | ColumnfdbNewCfgAddPortChannel | read-write | current | The MAC address port Channel number. |
| 1.3.6.1.4.1.1411.102.102.13.7.1.5 | ColumnfdbNewCfgAddMac | read-write | current | Add a fdb MAC address entry. |
| 1.3.6.1.4.1.1411.102.102.13.8 | ScalarfdbAgingTime | read-write | current | Aging time for dynamic mac address entries |
| 1.3.6.1.4.1.1411.102.102.14 | Nodeswitch | |||
| 1.3.6.1.4.1.1411.102.102.14.1 | ScalarhwPartNumber | read-only | current | The hardware part number of the Switch. |
| 1.3.6.1.4.1.1411.102.102.14.2 | ScalarhwRevision | read-only | current | The hardware revision. If the revision is not available, a zero length string should be returned. |
| 1.3.6.1.4.1.1411.102.102.14.3 | ScalarhwLastBoot | read-only | current | Reason of the last boot. |
| 1.3.6.1.4.1.1411.102.102.14.4 | ScalarhwMACAddress | read-only | current | The MAC address. |
| 1.3.6.1.4.1.1411.102.102.14.5 | ScalarhwSwitchRunningSwVersion | read-only | current | The switch software version. |
| 1.3.6.1.4.1.1411.102.102.14.6 | ScalarhwFlashConfiguration | read-only | current | The active flash configuration. |
| 1.3.6.1.4.1.1411.102.102.14.7 | ScalarhwPCBAPartNumber | read-only | current | The PCBA part number. |
| 1.3.6.1.4.1.1411.102.102.14.8 | ScalarhwFABNumber | read-only | current | FAB Number |
| 1.3.6.1.4.1.1411.102.102.14.9 | ScalarhardwareSerialNumber | read-only | current | The switch serial number. |
| 1.3.6.1.4.1.1411.102.102.14.10 | ScalarhardwareManufacturingDate | read-only | current | The date of manufacturing. |
| 1.3.6.1.4.1.1411.102.102.14.11 | ScalarhwTemperatureSensor1 | read-only | current | The temperature sensor 1. |
| 1.3.6.1.4.1.1411.102.102.14.12 | ScalarhwTemperatureSensor2 | read-only | current | The temperature sensor 2. |
| 1.3.6.1.4.1.1411.102.102.14.13 | ScalarhwTemperatureSensor3 | read-only | current | The temperature sensor 3. |
| 1.3.6.1.4.1.1411.102.102.14.14 | ScalarhwFan1RPMValue | read-only | current | The Fan 1 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.15 | ScalarhwFan2RPMValue | read-only | current | The Fan 2 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.16 | ScalarhwFan3RPMValue | read-only | current | The Fan 3 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.17 | ScalarhwFan4RPMValue | read-only | current | The Fan 4 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.18 | ScalarhwBoardRevision | read-only | current | The Board revision number. |
| 1.3.6.1.4.1.1411.102.102.14.19 | ScalarhwPLDFirmwareVersion | read-only | current | The PLD Firmware version. |
| 1.3.6.1.4.1.1411.102.102.14.20 | ScalarhwPowerSupply1State | read-only | current | The Power Supply 1 state. |
| 1.3.6.1.4.1.1411.102.102.14.21 | ScalarhwPowerSupply2State | read-only | current | The Power Supply 2 state. |
| 1.3.6.1.4.1.1411.102.102.14.22 | TablesfpInfoTable | not-accessible | current | The table of external port SFP information. |
| 1.3.6.1.4.1.1411.102.102.14.22.1 | RowsfpInfoTableEntry | not-accessible | current | A row in the external port SFP information table. |
| 1.3.6.1.4.1.1411.102.102.14.22.1.1 | ColumnsfpInfoIndx | read-only | current | Sfp Info index (45,46,47,48,49,50,51,52) |
| 1.3.6.1.4.1.1411.102.102.14.22.1.2 | ColumnsfpInfoDescription | read-only | current | Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3)) |
| 1.3.6.1.4.1.1411.102.102.14.22.1.3 | ColumnsfpInfoSerialNumber | read-only | current | Serial Number. |
| 1.3.6.1.4.1.1411.102.102.14.22.1.4 | ColumnsfpInfoPartNumber | read-only | current | Part Number. |
| 1.3.6.1.4.1.1411.102.102.14.22.1.5 | ColumnsfpInfoHWRevision | read-only | current | Hardware Revision |
| 1.3.6.1.4.1.1411.102.102.14.22.1.6 | ColumnsfpInfoPresent | read-only | current | Describes whether actual SFP/SFP+ transceiver installation is present or not |
| 1.3.6.1.4.1.1411.102.102.14.22.1.7 | ColumnsfpInfoApproved | read-only | current | Describes whether transceiver is an approved, accepted or unsupported device |
| 1.3.6.1.4.1.1411.102.102.14.22.1.8 | ColumnsfpInfoVendor | read-only | current | Vendor Name |
| 1.3.6.1.4.1.1411.102.102.14.22.1.9 | ColumnsfpInfoLaser | read-only | current | Wave Length |
| 1.3.6.1.4.1.1411.102.102.14.22.1.10 | ColumnsfpInfoDate | read-only | current | Manufacturing Date |
| 1.3.6.1.4.1.1411.102.102.14.22.1.11 | ColumnsfpInfoTemperature | read-only | current | Temperature |
| 1.3.6.1.4.1.1411.102.102.14.22.1.12 | ColumnsfpInfoVoltage | read-only | current | Voltage |
| 1.3.6.1.4.1.1411.102.102.14.24 | ScalarswImage1Version | read-only | current | Software image1 version |
| 1.3.6.1.4.1.1411.102.102.14.25 | ScalarswImage2Version | read-only | current | Software image2 version |
| 1.3.6.1.4.1.1411.102.102.14.26 | ScalarswBootVersion | read-only | current | Software boot version |
| 1.3.6.1.4.1.1411.102.102.14.33 | ScalarhwFan5RPMValue | read-only | current | The Fan 5 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.34 | ScalarhwFan6RPMValue | read-only | current | The Fan 6 RPM value. |
| 1.3.6.1.4.1.1411.102.102.14.35 | ScalarhwTemperatureSensorWarningThreshhold | read-only | current | The temperature sensor Warning Threshhold. |
| 1.3.6.1.4.1.1411.102.102.14.36 | ScalarhwTemperatureSensorRecoverThreshhold | read-only | current | The temperature sensor Recover Threshhold. |
| 1.3.6.1.4.1.1411.102.102.15 | Nodesnmp | |||
| 1.3.6.1.4.1.1411.102.102.15.1 | ScalarsnmpCfgServerVersion | read-write | current | To enable or disable the access to SNMP versions 1,2,3 or 3 only. |
| 1.3.6.1.4.1.1411.102.102.15.2 | ScalarsnmpCfgTrapSrcIf | read-write | current | The SNMP trap source interface number. |
| 1.3.6.1.4.1.1411.102.102.17 | NodebosSnmpTraps | |||
| 1.3.6.1.4.1.1411.102.102.17.1 | NotificationbosSwTempExceedThreshold | current | A bosSwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits. | |
| 1.3.6.1.4.1.1411.102.102.17.2 | NotificationbosSwFanFailure | current | A bosSwFanFailure trap signifies that a fan failure has occured. | |
| 1.3.6.1.4.1.1411.102.102.17.3 | NotificationbosSwPowerSupplyFailure | current | A bosSwPowerSupplyFailure trap signifies that the power supply failed. | |
| 1.3.6.1.4.1.1411.102.102.18 | Nodebosbhm | |||
| 1.3.6.1.4.1.1411.102.102.18.1 | NodedataCollection | |||
| 1.3.6.1.4.1.1411.102.102.18.1.1 | ScalaragPortTableMaxEnt | read-only | current | The maximum number of rows in the port configuration host table. |
| 1.3.6.1.4.1.1411.102.102.18.1.2 | ScalaragImageForNxtReset | read-write | current | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.1411.102.102.18.1.3 | ScalaragImage1Ver | read-only | current | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.1411.102.102.18.1.4 | ScalaragImage2Ver | read-only | current | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.1411.102.102.18.1.5 | ScalarhwSwitchSoftwareVersion | read-only | current | The switch software version. |
| 1.3.6.1.4.1.1411.102.102.18.1.6 | ScalarhwSerialNumber | read-only | current | The switch serial number. |
| 1.3.6.1.4.1.1411.102.102.18.1.7 | ScalarhwManufacturingDate | read-only | current | The date of manufacturing. |
| 1.3.6.1.4.1.1411.102.102.18.1.8 | ScalaragReset | read-write | current | This is an action object to reboot the agent. other(1) is returned always when read. |
| 1.3.6.1.4.1.1411.102.102.18.1.9 | ScalaragBootVer | read-only | current | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| 1.3.6.1.4.1.1411.102.102.18.1.10 | ScalaragConfigForNxtReset | read-write | current | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con… |
| 1.3.6.1.4.1.1411.102.102.18.1.11 | ScalaragSoftwareVersion | read-only | current | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if … |
| 1.3.6.1.4.1.1411.102.102.18.1.12 | ScalaragImage1DownloadDateAndTime | read-only | current | The date and time when Image1 was downloaded |
| 1.3.6.1.4.1.1411.102.102.18.1.13 | ScalaragImage2DownloadDateAndTime | read-only | current | The date and time when Image2 was downloaded |
| 1.3.6.1.4.1.1411.102.102.18.2 | NodegeneralConfiguration | |||
| 1.3.6.1.4.1.1411.102.102.18.2.1 | ScalaragSaveConfiguration | read-write | current | This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to … |
| 1.3.6.1.4.1.1411.102.102.18.2.2 | ScalaragNewCfgHttpServerPort | read-write | current | The TCP port number that the HTTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.1411.102.102.18.2.3 | ScalaragNewCfgTelnetServerPort | read-write | current | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.1411.102.102.18.2.4 | ScalaragNewCfgTftpServerPort | read-write | current | The TCP port number that the TFTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.1411.102.102.18.3 | NodeimageConfigTransfer | |||
| 1.3.6.1.4.1.1411.102.102.18.3.1 | ScalaragTftpServer | read-write | current | The TFTP server IP address or domain name. |
| 1.3.6.1.4.1.1411.102.102.18.3.2 | ScalaragTftpImage | read-write | current | Whether the image file should be loaded in image1 or image2 in flash. |
| 1.3.6.1.4.1.1411.102.102.18.3.3 | ScalaragTftpImageFileName | read-write | current | The image file name to be downloaded. |
| 1.3.6.1.4.1.1411.102.102.18.3.4 | ScalaragTftpCfgFileName | read-write | current | The configuration file name. |
| 1.3.6.1.4.1.1411.102.102.18.3.5 | ScalaragTftpAction | read-write | current | This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image f… |
| 1.3.6.1.4.1.1411.102.102.18.3.6 | ScalaragTftpLastActionStatus | read-only | current | The recorded status of the previous TFTP activity. |
| 1.3.6.1.4.1.1411.102.102.18.4 | NodeportInformation | |||
| 1.3.6.1.4.1.1411.102.102.18.4.1 | TableportInfoTable | not-accessible | current | The table of port information. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1 | RowportInfoTableEntry | not-accessible | current | A row in the port information table. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.1 | ColumnportInfoIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.2 | ColumnportInfoSpeed | read-write | current | The current operational speed of the port. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.3 | ColumnportInfoMode | read-write | current | The current operational mode of the port. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.4 | ColumnportInfoFlowCtrl | read-write | current | The current operational flow control of the port. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.5 | ColumnportInfoLink | read-only | current | The current operational link status of the port. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.6 | ColumnagPortNewCfgVlanTag | read-write | current | This is VLAN tag state of the port |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.7 | ColumnagPortNewCfgTagPVID | read-write | current | This is PVID tag state of the port |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.8 | ColumnagPortNewCfgPVID | read-write | current | The default VLAN ID for the port. |
| 1.3.6.1.4.1.1411.102.102.18.4.1.1.9 | ColumnagPortNewCfgPortName | read-write | current | The switch port name. |
| 1.3.6.1.4.1.1411.102.102.18.5 | NodevlanConfiguration | |||
| 1.3.6.1.4.1.1411.102.102.18.5.1 | ScalarbosCfgVlanNewVlan | read-write | current | VLAN Id of new Vlan that needs to be created. Get will always return 1. |
| 1.3.6.1.4.1.1411.102.102.18.5.2 | TablevlanNewCfgTable | not-accessible | current | The table of VLAN configuration. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1 | RowvlanNewCfgTableEntry | not-accessible | current | A row in the VLAN configuration table. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.1 | ColumnvlanNewCfgVlanId | read-only | current | The VLAN identifier. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.2 | ColumnvlanNewCfgVlanName | read-create | current | The VLAN name. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.3 | ColumnvlanNewCfgPorts | read-only | current | The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||… |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.4 | ColumnvlanNewCfgPortList | read-create | current | The port list in the VLAN. The ports are presented in a string format, delimited by ',' or an interval of ports delimited by '-' |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.5 | ColumnvlanNewCfgState | read-create | current | Enable or disable a VLAN |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.6 | ColumnvlanNewCfgAddPort | read-create | current | The port to be added to the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.7 | ColumnvlanNewCfgRemovePort | read-create | current | The port to be removed from the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.8 | ColumnvlanNewCfgDelete | read-create | current | This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.9 | ColumnvlanNewCfgStg | read-create | current | The Spanning Tree Group for the VLAN. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.10 | ColumnvlanNewCfgPrVlanType | read-write | current | The type of the Private VLAN. |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.11 | ColumnvlanNewCfgPrVlanMapPriId | read-write | current | The primary vlan id |
| 1.3.6.1.4.1.1411.102.102.18.5.2.1.12 | ColumnvlanNewCfgPrVlanState | read-write | current | Enable or disable a Private VLAN. |
| 1.3.6.1.4.1.1411.102.102.19 | NodebosAccessUser | |||
| 1.3.6.1.4.1.1411.102.102.19.1 | TableagAccessUserCfgTable | not-accessible | current | The table of Access user configuration. |
| 1.3.6.1.4.1.1411.102.102.19.1.1 | RowagAccessUserCfgTableEntry | not-accessible | current | A row in the Access user configuration table. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.1 | ColumnagAccessUserCfgUId | read-only | current | The User identifier. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.2 | ColumnagAccessUserCos | read-create | current | The user class of service. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.3 | ColumnagAccessUserCfgName | read-create | current | The user name. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.4 | ColumnagAccessUserCfgPswd | read-create | current | The character string representing the user password. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.5 | ColumnagAccessUserCfgState | read-create | current | Enable or disable a user. |
| 1.3.6.1.4.1.1411.102.102.19.1.1.6 | ColumnagAccessUserCfgDelete | read-create | current | This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User |
| 1.3.6.1.4.1.1411.102.102.20 | Nodemgmtintf | |||
| 1.3.6.1.4.1.1411.102.102.20.1 | ScalaragNewCfgMgmtNetwork | read-write | current | The management network - corresponding to the mnet command of the system menu. |
| 1.3.6.1.4.1.1411.102.102.20.2 | ScalaragNewCfgMgmtMask | read-write | current | The management subnet mask - corresponding to the mmask command of the system configuration menu. |
| 1.3.6.1.4.1.1411.102.102.20.3 | ScalarbosoobGatewayIpAddr | read-write | current | Default gateway configured over OOB management interface |
| 1.3.6.1.4.1.1411.102.102.20.4 | ScalaroobIpAddr | read-write | current | IP Address of the system. |
| 1.3.6.1.4.1.1411.102.102.20.5 | ScalaroobIpSubnetMask | read-write | current | IP subnet mask for the oob IP address. |
| 1.3.6.1.4.1.1411.102.102.20.6 | ScalarbosOOBGatewayStatus | read-write | current | Enables/Disables Management Gateway of the System |
| 1.3.6.1.4.1.1411.102.102.20.7 | ScalarbosDefaultIpAddrStatus | read-write | current | Enables/Disables Management OOB Interface of the System |
| 1.3.6.1.4.1.1411.102.102.20.8 | ScalarbosDefaultIpAddrCfgMode | read-write | current | The mechanism to be used for allocation of IP configuration parameter i.e address, mask, gateway etc for default OOB interface. The dynamic(2) option takes an … |
| 1.3.6.1.4.1.1411.102.102.1000 | ScalarbntSwTrapDisplayString | read-only | current | Temporary string object used to store information about trap being sent in an BNT Switch traps. |
| 1.3.6.1.4.1.1411.102.105 | Nodebossnoop | |||
| 1.3.6.1.4.1.1411.102.105.1 | NodebosSnoopSystem | |||
| 1.3.6.1.4.1.1411.102.105.2 | NodebosSnoopInst | |||
| 1.3.6.1.4.1.1411.102.105.2.1 | TablebosSnoopInstanceGlobalTable | not-accessible | current | This table contains multicast forwarding mode configuration for each instance running in the snooping switch |
| 1.3.6.1.4.1.1411.102.105.2.1.1 | RowbosSnoopInstanceGlobalEntry | not-accessible | current | This table contains instance number and the multicast forwarding mode configuration for the particular instance |
| 1.3.6.1.4.1.1411.102.105.2.1.1.1 | ColumnbosSnoopInstanceGlobalInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. |
| 1.3.6.1.4.1.1411.102.105.2.2 | TablebosSnoopInstanceConfigTable | not-accessible | current | This table contains global configuration of snooping for each instance running in switch |
| 1.3.6.1.4.1.1411.102.105.2.2.1 | RowbosSnoopInstanceConfigEntry | not-accessible | current | This table contains instance number, address type and the list of global configuration for the particular instance and address type |
| 1.3.6.1.4.1.1411.102.105.2.2.1.1 | ColumnbosSnoopInstanceConfigInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.1411.102.105.2.2.1.2 | ColumnbosSnoopInetAddressType | not-accessible | current | Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.1411.102.105.2.2.1.3 | ColumnbosSnoopStatus | read-write | current | Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the IGS/MLDS module starts protocol operations. When set to 'disabled', the IGS/MLD… |
| 1.3.6.1.4.1.1411.102.105.2.2.1.4 | ColumnbosSnoopRouterPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInter… |
| 1.3.6.1.4.1.1411.102.105.2.2.1.5 | ColumnbosSnoopPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received this timer runs for 'PortPurg… |
| 1.3.6.1.4.1.1411.102.105.2.2.1.6 | ColumnbosSnoopGrpQueryInterval | read-write | current | The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receiv… |
| 1.3.6.1.4.1.1411.102.105.2.2.1.7 | ColumnbosSnoopOperStatus | read-only | current | The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) in… |
| 1.3.6.1.4.1.1411.102.105.3 | NodebosSnoopVlan | |||
| 1.3.6.1.4.1.1411.102.105.3.1 | TablebosSnoopVlanMcastIpFwdTable | not-accessible | current | This table contains IP based multicast forwarding information. This information is applicable only if the 'bosSnoopInstMcastForwardingMode' is set to 'ip-based' |
| 1.3.6.1.4.1.1411.102.105.3.1.1 | RowbosSnoopVlanMcastIpFwdEntry | not-accessible | current | This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be f… |
| 1.3.6.1.4.1.1411.102.105.3.1.1.1 | ColumnbosSnoopVlanMcastIpFwdInstId | not-accessible | current | Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.1411.102.105.3.1.1.2 | ColumnbosSnoopVlanMcastIpFwdVlanId | not-accessible | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.1411.102.105.3.1.1.3 | ColumnbosSnoopVlanMcastIpFwdAddressType | not-accessible | current | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.1411.102.105.3.1.1.4 | ColumnbosSnoopVlanMcastIpFwdSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.1411.102.105.3.1.1.5 | ColumnbosSnoopVlanMcastIpFwdGroupAddress | not-accessible | current | IP/IPv6 multicast group address |
| 1.3.6.1.4.1.1411.102.105.3.1.1.6 | ColumnbosSnoopVlanMcastIpFwdPortList | read-only | current | List of ports onto which the multicast data packets destined for this source and group will be forwarded. |
| 1.3.6.1.4.1.1411.102.105.3.2 | TablebosSnoopVlanRouterTable | not-accessible | current | This table contains the list of ports through which a router, in a particular VLAN is reachable. |
| 1.3.6.1.4.1.1411.102.105.3.2.1 | RowbosSnoopVlanRouterEntry | not-accessible | current | Contains the VLAN ID and list of ports on which routers are present in the VLAN. |
| 1.3.6.1.4.1.1411.102.105.3.2.1.1 | ColumnbosSnoopVlanRouterInstId | not-accessible | current | Instance ID pertaining to the router port entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.1411.102.105.3.2.1.2 | ColumnbosSnoopVlanRouterVlanId | not-accessible | current | VLAN ID of the ports through which router is reachable. |
| 1.3.6.1.4.1.1411.102.105.3.2.1.3 | ColumnbosSnoopVlanRouterInetAddressType | not-accessible | current | It indicates whether the row belongs to IGMP / MLD snooping. |
| 1.3.6.1.4.1.1411.102.105.3.2.1.4 | ColumnbosSnoopVlanRouterPortList | read-only | current | List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically. |
| 1.3.6.1.4.1.1411.102.105.3.3 | TablebosSnoopVlanFilterTable | not-accessible | current | This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. |
| 1.3.6.1.4.1.1411.102.105.3.3.1 | RowbosSnoopVlanFilterEntry | not-accessible | current | Contains snooping status , version and fast leave configuration for a specific VLAN. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.1 | ColumnbosSnoopVlanFilterInstId | read-only | current | Instance ID pertaining to VLAN filter table entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.1411.102.105.3.3.1.2 | ColumnbosSnoopVlanFilterVlanId | read-only | current | VLAN ID for which snooping configuration is to be done. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.3 | ColumnbosSnoopVlanFilterInetAddressType | read-only | current | Indicates whether the row belongs to IGS/MLD snooping |
| 1.3.6.1.4.1.1411.102.105.3.3.1.4 | ColumnbosSnoopVlanSnoopStatus | read-write | current | Enables or disables IGS/MLDS on that specific VLAN |
| 1.3.6.1.4.1.1411.102.105.3.3.1.5 | ColumnbosSnoopVlanOperatingVersion | read-only | current | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.6 | ColumnbosSnoopVlanCfgOperVersion | read-write | current | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.7 | ColumnbosSnoopVlanFastLeave | read-write | current | Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for t… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.8 | ColumnbosSnoopVlanRtrPortList | read-write | current | List of ports which are configured statically as router ports |
| 1.3.6.1.4.1.1411.102.105.3.3.1.9 | ColumnbosSnoopVlanRowStatus | read-write | current | The status of a row in the VLAN filter table. By 'bosSnoopVlanRowStatus' new entries can be created in the VLAN filter table and the existing entries can be re… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.10 | ColumnbosSnoopVlanQuerier | read-only | current | Indicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the s… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.11 | ColumnbosSnoopVlanCfgQuerier | read-write | current | The snooping switch can be configured to send IGMP queries. when querier are not present in the VLAN and it set to 'enabled' the switch will generate general q… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.12 | ColumnbosSnoopVlanQueryInterval | read-write | current | This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. To update current vlaue set bosSn… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.13 | ColumnbosSnoopVlanSrcIp | read-write | current | The source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch.… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.14 | ColumnbosSnoopVlanElectionType | read-write | current | The querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the elect… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.15 | ColumnbosSnoopVlanRobustness | read-write | current | The Robustness Variable allows tuning for the Other Querier Present Interval. To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.16 | ColumnbosSnoopVlanStartupQueryCount | read-write | current | Represents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval. To update current vlaue set bosSnoopVlanRowS… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.17 | ColumnbosSnoopVlanStartupQueryInterval | read-write | current | This variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval. To update current v… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.18 | ColumnbosSnoopVlanQueryMaxResponseTime | read-write | current | The maximum query response interval advertised in IGMP queries on this VLAN. To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.19 | ColumnbosSnoopVlanLastMemberQueryCount | read-write | current | Last Member Query Count is the number of Group-Specific Queries sent before the switch assumes there are no local members. To update current vlaue set bosSnoop… |
| 1.3.6.1.4.1.1411.102.105.3.3.1.20 | ColumnbosSnoopVlanSystemMac | read-only | current | The Source MAC Address of the switch, which is used in Querier election, when bosSnoopVlanQuerierType is selected as macadd on this vlan. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.21 | ColumnbosSnoopVlanOtherQuerierAddress | read-only | current | The IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan. |
| 1.3.6.1.4.1.1411.102.105.3.3.1.22 | ColumnbosSnoopVlanOtherQuerierPresentInterval | read-only | current | The Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be … |
| 1.3.6.1.4.1.1411.102.105.3.3.1.23 | ColumnbosSnoopVlanOlderVersionPresentInterval | read-only | current | Indicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGM… |
| 1.3.6.1.4.1.1411.102.105.4 | NodebosSnoopStats | |||
| 1.3.6.1.4.1.1411.102.105.4.1 | TablebosSnoopStatsTable | not-accessible | current | This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis. |
| 1.3.6.1.4.1.1411.102.105.4.1.1 | RowbosSnoopStatsEntry | not-accessible | current | Contains snooping statistics for a particular VLAN. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.1 | ColumnbosSnoopStatsInstId | not-accessible | current | Instance ID pertaining for the statistics entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.1411.102.105.4.1.1.2 | ColumnbosSnoopStatsVlanId | not-accessible | current | VLAN ID for which snooping statistics are displayed |
| 1.3.6.1.4.1.1411.102.105.4.1.1.3 | ColumnbosSnoopStatsInetAddressType | not-accessible | current | Indicates whether the statistics are for IGS/MLDS |
| 1.3.6.1.4.1.1411.102.105.4.1.1.4 | ColumnbosSnoopStatsRxGenQueries | read-only | current | Provides the statistics of General Queries received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.5 | ColumnbosSnoopStatsRxGrpQueries | read-only | current | Provides the statistics of Group Specific Queries received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.6 | ColumnbosSnoopStatsRxGrpAndSrcQueries | read-only | current | Provides the statistics of Group and Source Specific Queries received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.7 | ColumnbosSnoopStatsRxAsmReports | read-only | current | Provides the statistics of IGMPv1/IGMPv2 Membership reports received by the snooping switch. In case of MLDS, it provides the statistics of MLDv1 membership re… |
| 1.3.6.1.4.1.1411.102.105.4.1.1.8 | ColumnbosSnoopStatsRxSsmReports | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.9 | ColumnbosSnoopStatsRxSsmIsInMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type IS_IN received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.10 | ColumnbosSnoopStatsRxSsmIsExMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type IS_EX received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.11 | ColumnbosSnoopStatsRxSsmToInMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type TO_IN received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.12 | ColumnbosSnoopStatsRxSsmToExMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type TO_EX received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.13 | ColumnbosSnoopStatsRxSsmAllowMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type ALLOW received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.14 | ColumnbosSnoopStatsRxSsmBlockMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type BLOCK received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.15 | ColumnbosSnoopStatsRxAsmLeaves | read-only | current | Provides the statistics of IGMPv2/MLDv1 Leave messages received by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.16 | ColumnbosSnoopStatsTxGenQueries | read-only | current | Provides the statistics of General Queries transmitted by the snooping switch when it is act as a querier. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.17 | ColumnbosSnoopStatsTxGrpQueries | read-only | current | Provides the statistics of Group Specific Queries transmitted by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.18 | ColumnbosSnoopStatsTxAsmReports | read-only | current | Provides the statistics of IGMPv1/IGMPv2 Membership reports transmitted by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.19 | ColumnbosSnoopStatsTxSsmReports | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports transmitted by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.20 | ColumnbosSnoopStatsTxAsmLeaves | read-only | current | Provides the statistics of IGMPv2/MLDv1 Leave messages transmitted by the snooping switch. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.21 | ColumnbosSnoopStatsDroppedPkts | read-only | current | Provides the number of erroneous IGMP/MLD packets dropped by the snooping switch due to packet error. |
| 1.3.6.1.4.1.1411.102.105.4.1.1.22 | ColumnbosSnoopStatsValidPkts | read-only | current | Provides the number of valid IGMP/MLD packets processed by the snooping switch |
| 1.3.6.1.4.1.1411.102.109 | Nodebosarp | |||
| 1.3.6.1.4.1.1411.102.109.1 | Nodearp | |||
| 1.3.6.1.4.1.1411.102.109.1.1 | ScalarbosArpCacheTimeout | read-write | current | Time after which the entry in cache is deleted |
| 1.3.6.1.4.1.1411.102.109.1.2 | ScalarbosArpCachePendTime | read-write | current | Time for which an unresolved entry will be held until response is received |
| 1.3.6.1.4.1.1411.102.109.1.3 | ScalarbosArpMaxRetries | read-write | current | Maximum number of retry attempts before aborting resolving |
| 1.3.6.1.4.1.1411.102.112 | Nodebossnmp3 | |||
| 1.3.6.1.4.1.1411.102.112.1 | ScalarsnmpInInformResponses | read-only | current | Total number of SNMP Inform responses received by the Agent from manager. |
| 1.3.6.1.4.1.1411.102.112.2 | ScalarsnmpOutInformRequests | read-only | current | Total number of SNMP Inform requests sent by the Agent to manager. |
| 1.3.6.1.4.1.1411.102.112.3 | ScalarsnmpInformDrops | read-only | current | Total number of SNMP Inform messages dropped by the Agent after retransmission. |
| 1.3.6.1.4.1.1411.102.112.4 | ScalarsnmpInformAwaitingAck | read-only | current | Total number of SNMP Inform messages for which Acknowledgement is expected from manager. |
| 1.3.6.1.4.1.1411.102.112.5 | TablesnmpInformCntTable | not-accessible | current | The SNMP Inform Counters Table is used to store the statistics of the INFORM PDUs sent from the device. |
| 1.3.6.1.4.1.1411.102.112.5.1 | RowsnmpInformCntEntry | not-accessible | current | Each entry contains one Manager entry with INFORM Statistics. |
| 1.3.6.1.4.1.1411.102.112.5.1.1 | ColumnsnmpInformTgtAddrName | not-accessible | current | The IpAddress corresponding to the Remote SNMP Entity configured to receive INFORM notifications. The Index corresponds to an entry in snmpTargetAddrTable |
| 1.3.6.1.4.1.1411.102.112.5.1.2 | ColumnsnmpInformSent | read-only | current | The total number of INFORM messages delivered from the SNMP entity to the transport service. |
| 1.3.6.1.4.1.1411.102.112.5.1.3 | ColumnsnmpInformAwaitAck | read-only | current | The total number of INFORM messages waiting to be acknowledged by the remote SNMP Entity |
| 1.3.6.1.4.1.1411.102.112.5.1.4 | ColumnsnmpInformRetried | read-only | current | The total number of INFORM messages retransmitted to the remote SNMP Entity from the SNMP entity |
| 1.3.6.1.4.1.1411.102.112.5.1.5 | ColumnsnmpInformDropped | read-only | current | The total number of unacknowledged INFORM messages discarded by the SNMP entity to make room for new INFORMs. |
| 1.3.6.1.4.1.1411.102.112.5.1.6 | ColumnsnmpInformFailed | read-only | current | The total number of INFORM messages failed to receive an Acknowledgement from the remote SNMP entity. |
| 1.3.6.1.4.1.1411.102.112.5.1.7 | ColumnsnmpInformResponses | read-only | current | The total number of INFORM ACK messages received as Acknowledgement from the remote SNMP entity. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BosKeyChange | OCTET STRING | current | Every definition of an object with this syntax must identify a protocol P, a secret key K, and a hash algorithm H that produces output of L octets. The object's value is a manager-generated, partially-random value which… |
| BridgeId | OCTET STRING (SIZE (8)) | current | Identifier of Bridge in 8 byte format |
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| InterfaceIndex | Integer32 (1..2147483647) | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must r… |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| SnmpTagList | OCTET STRING (SIZE (0..255)) | current | An octet string containing a list of tag values. Tag values are preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded … |
| SnmpTagValue | OCTET STRING (SIZE (0..255)) | current | An octet string containing a tag value. Tag values are preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |
| Timeout | Integer32 | current | Time out value in 4 byte |
| VlanId | Integer32 (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |