EXP-DOCS-CABLE-DEVICE-MIB
144 objects
This is the MIB Module for MCNS-compliant cable modems and cable-modem termination systems.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| IPV6-TC | Ipv6Address |
| RFC1155-SMI | experimental |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMP-VIEW-BASED-ACM-MIB | vacmAccessEntry |
| SNMPv2-CONF | -- RFC 2465 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | Counter32 Integer32 IpAddress mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | DateAndTime RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.83 | IdentitydocsDev | This is the MIB Module for MCNS-compliant cable modems and cable-modem termination systems. | ||
| 1.3.6.1.3.83.1 | NodedocsDevMIBObjects | |||
| 1.3.6.1.3.83.1.1 | NodedocsDevBase | |||
| 1.3.6.1.3.83.1.1.1 | ScalardocsDevRole | read-only | current | Defines the current role of this device. cm (1) is a Cable Modem, cmtsActive(2) is a Cable Modem Termination System which is controlling the system of cable mo… |
| 1.3.6.1.3.83.1.1.2 | ScalardocsDevDateTime | read-write | current | The current date and time, with optional timezone information. This is set at boot from the time server. If its impossible to set this from boot, this shall re… |
| 1.3.6.1.3.83.1.1.3 | ScalardocsDevResetNow | read-write | current | Setting this object to true(1) causes the device to reset. Reading this object always returns false(2). |
| 1.3.6.1.3.83.1.1.4 | ScalardocsDevSerialNumber | read-only | current | The manufacturer's serial number for this device. |
| 1.3.6.1.3.83.1.1.5 | ScalardocsDevSTPControl | read-write | current | This object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protoc… |
| 1.3.6.1.3.83.1.2 | TabledocsDevNmAccessTable | not-accessible | deprecated | This table controls access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted. This table exists onl… |
| 1.3.6.1.3.83.1.2.1 | RowdocsDevNmAccessEntry | not-accessible | deprecated | An entry describing access to SNMP objects by a particular network management station. An entry in this table is not readable unless the management station has… |
| 1.3.6.1.3.83.1.2.1.1 | ColumndocsDevNmAccessIndex | not-accessible | deprecated | Index used to order the application of access entries. |
| 1.3.6.1.3.83.1.2.1.2 | ColumndocsDevNmAccessIp | read-create | deprecated | The IP address (or subnet) of the network management station. The address 255.255.255.255 is defined to mean any NMS. If traps are enabled for this entry, then… |
| 1.3.6.1.3.83.1.2.1.3 | ColumndocsDevNmAccessIpMask | read-create | deprecated | The IP subnet mask of the network management stations. If traps are enabled for this entry, then the value must be 255.255.255.255. |
| 1.3.6.1.3.83.1.2.1.4 | ColumndocsDevNmAccessCommunity | read-create | deprecated | The community string to be matched for access by this entry. If set to a zero length string then any community string will match. When read, this object SHOULD… |
| 1.3.6.1.3.83.1.2.1.5 | ColumndocsDevNmAccessControl | read-create | deprecated | Specifies the type of access allowed to this NMS. Setting this object to none(1) causes the table entry to be destroyed. Read(2) allows access by 'get' and 'ge… |
| 1.3.6.1.3.83.1.2.1.6 | ColumndocsDevNmAccessInterfaces | read-create | deprecated | Specifies the set of interfaces from which requests from this NMS will be accepted. Each octet within the value of this object specifies a set of eight interfa… |
| 1.3.6.1.3.83.1.2.1.7 | ColumndocsDevNmAccessStatus | read-create | deprecated | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.3.83.1.3 | NodedocsDevSoftware | |||
| 1.3.6.1.3.83.1.3.1 | ScalardocsDevSwServer | read-write | deprecated | The address of the TFTP server used for software upgrades. If the TFTP server is unknown or is a V6 address, return 0.0.0.0. This entry is deprecated. See docs… |
| 1.3.6.1.3.83.1.3.2 | ScalardocsDevSwFilename | read-write | current | The file name of the software image to be loaded into this device. Unless set via SNMP, this is the file name specified by the provisioning server that corresp… |
| 1.3.6.1.3.83.1.3.3 | ScalardocsDevSwAdminStatus | read-write | current | If set to upgradeFromMgt(1), the device will initiate a TFTP software image download using docsDevSwFilename. After successfully receiving an image, the device… |
| 1.3.6.1.3.83.1.3.4 | ScalardocsDevSwOperStatus | read-only | current | InProgress(1) indicates that a TFTP download is underway, either as a result of a version mismatch at provisioning or as a result of a upgradeFromMgt request. … |
| 1.3.6.1.3.83.1.3.5 | ScalardocsDevSwCurrentVers | read-only | current | The software version currently operating in this device. This object should be in the syntax used by the individual vendor to identify software versions. Any C… |
| 1.3.6.1.3.83.1.3.6 | ScalardocsDevSwServerAddress | read-write | current | The address of the TFTP server used for software upgrades. If the TFTP server is unknown, return the zero length address string (See the TextualConvention). If… |
| 1.3.6.1.3.83.1.4 | NodedocsDevServer | |||
| 1.3.6.1.3.83.1.4.1 | ScalardocsDevServerBootState | read-only | current | If operational(1), the device has completed loading and processing of configuration parameters and the CMTS has completed the Registration exchange. If disable… |
| 1.3.6.1.3.83.1.4.2 | ScalardocsDevServerDhcp | read-only | deprecated | The IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment, or if this agent … |
| 1.3.6.1.3.83.1.4.3 | ScalardocsDevServerTime | read-only | deprecated | The IP address of the Time server (RFC-868). Returns 0.0.0.0 if the time server IP address is unknown, or if the time server was an IPv6 server. Deprecated. Th… |
| 1.3.6.1.3.83.1.4.4 | ScalardocsDevServerTftp | read-only | deprecated | The IP address of the TFTP server responsible for downloading provisioning and configuration parameters to this device. Returns 0.0.0.0 if the TFTP server addr… |
| 1.3.6.1.3.83.1.4.5 | ScalardocsDevServerConfigFile | read-only | current | The name of the device configuration file read from the TFTP server. Returns an empty string if the configuration file name is unknown. |
| 1.3.6.1.3.83.1.4.6 | ScalardocsDevServerDhcpAddress | read-only | current | The IP v4 or v6 address of the DHCP server that assigned an IP address to this device. Returns the zero length octet string if DHCP was not used for IP address… |
| 1.3.6.1.3.83.1.4.7 | ScalardocsDevServerTimeAddress | read-only | current | The IP V4 or V6 address of the Time server (RFC-868). Returns the zero length octet string if the time server IP address is unknown. |
| 1.3.6.1.3.83.1.4.8 | ScalardocsDevServerConfigTftpAddress | read-only | current | The IP V4 or V6 address of the TFTP server responsible for downloading provisioning and configuration parameters to this device. Returns the zero length octet … |
| 1.3.6.1.3.83.1.5 | NodedocsDevEvent | |||
| 1.3.6.1.3.83.1.5.1 | ScalardocsDevEvControl | read-write | current | Setting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their facto… |
| 1.3.6.1.3.83.1.5.2 | ScalardocsDevEvSyslog | read-write | deprecated | The IP address of the Syslog server. If 0.0.0.0, syslog transmission is either inhibited, or if docsDevEvSyslogAddress exists in this agent - may be an IPv6 de… |
| 1.3.6.1.3.83.1.5.3 | ScalardocsDevEvThrottleAdminStatus | read-write | current | Controls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be trans… |
| 1.3.6.1.3.83.1.5.4 | ScalardocsDevEvThrottleInhibited | read-only | current | If true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of docsDevEvThrottleAdminStatus. In addition, this… |
| 1.3.6.1.3.83.1.5.5 | ScalardocsDevEvThrottleThreshold | read-write | current | Number of trap/syslog events per docsDevEvThrottleInterval to be transmitted before throttling. A single event is always treated as a single event for threshol… |
| 1.3.6.1.3.83.1.5.6 | ScalardocsDevEvThrottleInterval | read-write | current | The interval over which the trap threshold applies. At initial startup, this object has a value of 1. |
| 1.3.6.1.3.83.1.5.7 | TabledocsDevEvControlTable | not-accessible | current | This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. The mapp… |
| 1.3.6.1.3.83.1.5.7.1 | RowdocsDevEvControlEntry | not-accessible | current | Allows configuration of the reporting mechanisms for a particular event priority. |
| 1.3.6.1.3.83.1.5.7.1.1 | ColumndocsDevEvPriority | not-accessible | current | The priority level that is controlled by this entry. These are ordered from most (emergency) to least (debug) critical. Each event with a CM or CMTS has a part… |
| 1.3.6.1.3.83.1.5.7.1.2 | ColumndocsDevEvReporting | read-write | current | Defines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum… |
| 1.3.6.1.3.83.1.5.8 | TabledocsDevEventTable | not-accessible | current | Contains a log of network and device events that may be of interest in fault isolation and troubleshooting. |
| 1.3.6.1.3.83.1.5.8.1 | RowdocsDevEventEntry | not-accessible | current | Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by inc… |
| 1.3.6.1.3.83.1.5.8.1.1 | ColumndocsDevEvIndex | not-accessible | current | Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via docsDevEvControl, (b) the dev… |
| 1.3.6.1.3.83.1.5.8.1.2 | ColumndocsDevEvFirstTime | read-only | current | The value of docsDevDateTime at the time this entry was created. |
| 1.3.6.1.3.83.1.5.8.1.3 | ColumndocsDevEvLastTime | read-only | current | If multiple events are reported via the same entry, the value of docsDevDateTime that the last event for this entry occurred, otherwise this should have the sa… |
| 1.3.6.1.3.83.1.5.8.1.4 | ColumndocsDevEvCounts | read-only | current | The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplic… |
| 1.3.6.1.3.83.1.5.8.1.5 | ColumndocsDevEvLevel | read-only | current | The priority level of this event as defined by the vendor. These are ordered from most serious (emergency) to least serious (debug). |
| 1.3.6.1.3.83.1.5.8.1.6 | ColumndocsDevEvId | read-only | current | For this product, uniquely identifies the type of event that is reported by this entry. |
| 1.3.6.1.3.83.1.5.8.1.7 | ColumndocsDevEvText | read-only | current | Provides a human-readable description of the event, including all relevant context (interface numbers, etc.). |
| 1.3.6.1.3.83.1.5.9 | ScalardocsDevEvSyslogAddress | read-write | current | The IP V4 or V6 address of the Syslog server. If the address of the server is set to any of the zero length string, the 0.0.0.0 V4 address or the 0: V6 address… |
| 1.3.6.1.3.83.1.6 | NodedocsDevFilter | |||
| 1.3.6.1.3.83.1.6.1 | ScalardocsDevFilterLLCUnmatchedAction | read-write | current | LLC (Link Level Control) filters can be defined on an inclusive or exclusive basis: CMs can be configured to forward only packets matching a set of layer three… |
| 1.3.6.1.3.83.1.6.2 | TabledocsDevFilterLLCTable | not-accessible | current | A list of filters to apply to (bridged) LLC traffic. The filters in this table are applied to incoming traffic on the appropriate interface(s) prior to any fur… |
| 1.3.6.1.3.83.1.6.2.1 | RowdocsDevFilterLLCEntry | not-accessible | current | Describes a single filter to apply to (bridged) LLC traffic received on a specified interface. |
| 1.3.6.1.3.83.1.6.2.1.1 | ColumndocsDevFilterLLCIndex | not-accessible | current | Index used for the identification of filters (note that LLC filter order is irrelevant). |
| 1.3.6.1.3.83.1.6.2.1.2 | ColumndocsDevFilterLLCStatus | read-create | current | Controls and reflects the status of rows in this table. There is no restriction on changing any of the associated columns for this row while this object is set… |
| 1.3.6.1.3.83.1.6.2.1.3 | ColumndocsDevFilterLLCIfIndex | read-create | deprecated | The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, th… |
| 1.3.6.1.3.83.1.6.2.1.4 | ColumndocsDevFilterLLCProtocolType | read-create | current | The format of the value in docsDevFilterLLCProtocol: either a two-byte Ethernet Ethertype, or a one-byte 802.2 SAP value. EtherType(1) also applies to SNAP- en… |
| 1.3.6.1.3.83.1.6.2.1.5 | ColumndocsDevFilterLLCProtocol | read-create | current | The layer three protocol for which this filter applies. The protocol value format depends on docsDevFilterLLCProtocolType. Note that for SNAP frames, etherType… |
| 1.3.6.1.3.83.1.6.2.1.6 | ColumndocsDevFilterLLCMatches | read-only | current | Counts the number of times this filter was matched. |
| 1.3.6.1.3.83.1.6.2.1.7 | ColumndocsDevFilterLLCInterfaces | read-create | current | Specifies the set of interfaces this filter applies to. Each octet within the value of this object specifies a set of eight interfaces, with the first octet sp… |
| 1.3.6.1.3.83.1.6.2.1.8 | ColumndocsDevFilterLLCInterfaceSet | read-create | current | This is a convenience object for setting the value of docsDevFilterLLCInterfaces. Upon a valid set, this causes docsDevFilterLLCInterfaces in the same row to b… |
| 1.3.6.1.3.83.1.6.3 | ScalardocsDevFilterIpDefault | read-write | current | The default behavior for (bridged) packets that do not match IP filters is defined by docsDevFilterIpDefault. If set to discard(1), all packets not matching an… |
| 1.3.6.1.3.83.1.6.4 | TabledocsDevFilterIpTable | not-accessible | current | An ordered list of filters or classifiers to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm (Not… |
| 1.3.6.1.3.83.1.6.4.1 | RowdocsDevFilterIpEntry | not-accessible | current | Describes a filter to apply to IP traffic received on a specified interface. All identity objects in this table (e.g. source and destination address/mask, prot… |
| 1.3.6.1.3.83.1.6.4.1.1 | ColumndocsDevFilterIpIndex | not-accessible | current | Index used to order the application of filters. The filter with the lowest index is always applied first. |
| 1.3.6.1.3.83.1.6.4.1.2 | ColumndocsDevFilterIpStatus | read-create | current | Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row w… |
| 1.3.6.1.3.83.1.6.4.1.3 | ColumndocsDevFilterIpControl | read-create | current | If set to discard(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will be aborted. If set to accept(2),… |
| 1.3.6.1.3.83.1.6.4.1.4 | ColumndocsDevFilterIpIfIndex | read-create | deprecated | The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another interface. If the value is zero, the filter… |
| 1.3.6.1.3.83.1.6.4.1.5 | ColumndocsDevFilterIpDirection | read-create | current | Determines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions. |
| 1.3.6.1.3.83.1.6.4.1.6 | ColumndocsDevFilterIpBroadcast | read-create | current | If set to true(1), the filter only applies to multicast and broadcast traffic. If set to false(2), the filter applies to all traffic. |
| 1.3.6.1.3.83.1.6.4.1.7 | ColumndocsDevFilterIpSaddr | read-create | current | The source IP address, or portion thereof, that is to be matched for this filter. The source address is first masked (and'ed) against docsDevFilterIpSmask befo… |
| 1.3.6.1.3.83.1.6.4.1.8 | ColumndocsDevFilterIpSmask | read-create | current | A bit mask that is to be applied to the source address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost… |
| 1.3.6.1.3.83.1.6.4.1.9 | ColumndocsDevFilterIpDaddr | read-create | current | The destination IP address, or portion thereof, that is to be matched for this filter. The destination address is first masked (and'ed) against docsDevFilterIp… |
| 1.3.6.1.3.83.1.6.4.1.10 | ColumndocsDevFilterIpDmask | read-create | current | A bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be lef… |
| 1.3.6.1.3.83.1.6.4.1.11 | ColumndocsDevFilterIpProtocol | read-create | current | The IP protocol value that is to be matched. For example: icmp is 1, tcp is 6, udp is 17. A value of 256 matches ANY protocol. |
| 1.3.6.1.3.83.1.6.4.1.12 | ColumndocsDevFilterIpSourcePortLow | read-create | current | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be matched, otherwise it is ign… |
| 1.3.6.1.3.83.1.6.4.1.13 | ColumndocsDevFilterIpSourcePortHigh | read-create | current | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be matched, otherwise it is ign… |
| 1.3.6.1.3.83.1.6.4.1.14 | ColumndocsDevFilterIpDestPortLow | read-create | current | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is to be matched, otherwise it i… |
| 1.3.6.1.3.83.1.6.4.1.15 | ColumndocsDevFilterIpDestPortHigh | read-create | current | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is to be matched, otherwise it i… |
| 1.3.6.1.3.83.1.6.4.1.16 | ColumndocsDevFilterIpMatches | read-only | current | Counts the number of times this filter was matched. This object is initialized to 0 at boot, or at row creation, and is reset only upon reboot. |
| 1.3.6.1.3.83.1.6.4.1.17 | ColumndocsDevFilterIpTos | read-create | current | This is the value to be matched to the packet's TOS (Type of Service) value (after the TOS value is AND'd with docsDevFilterIpTosMask). A value for this object… |
| 1.3.6.1.3.83.1.6.4.1.18 | ColumndocsDevFilterIpTosMask | read-create | current | The mask to be applied to the packet's TOS value before matching. |
| 1.3.6.1.3.83.1.6.4.1.19 | ColumndocsDevFilterIpContinue | read-create | current | If this value is set to true, and docsDevFilterIpControl is anything but discard (1), continue scanning and applying policies. |
| 1.3.6.1.3.83.1.6.4.1.20 | ColumndocsDevFilterIpPolicyId | read-create | current | This object points to an entry in docsDevFilterPolicyTable. If docsDevFilterIpControl is set to policy (3), execute all matching policies in docsDevFilterPolic… |
| 1.3.6.1.3.83.1.6.4.1.21 | ColumndocsDevFilterIpInterfaces | read-create | current | Specifies the set of interfaces this filter applies to. Each octet within the value of this object specifies a set of eight interfaces, with the first octet sp… |
| 1.3.6.1.3.83.1.6.4.1.22 | ColumndocsDevFilterIpInterfaceSet | read-create | current | This is a convenience object for setting the value of docsDevFilterIpInterfaces. Upon read this always returns other (1). Upon a valid set, this causes docsDev… |
| 1.3.6.1.3.83.1.6.5 | TabledocsDevFilterPolicyTable | not-accessible | current | A Table which maps between a policy group ID and a set of policies to be applied. All rows with the same docsDevFilterPolicyId are part of the same policy grou… |
| 1.3.6.1.3.83.1.6.5.1 | RowdocsDevFilterPolicyEntry | not-accessible | current | An entry in the docsDevFilterPolicyTable. Entries are created by Network Management. To create an entry, docsDevFilterPolicyId and docsDevFilterPolicyAction mu… |
| 1.3.6.1.3.83.1.6.5.1.1 | ColumndocsDevFilterPolicyIndex | not-accessible | current | Index value for the table. |
| 1.3.6.1.3.83.1.6.5.1.2 | ColumndocsDevFilterPolicyId | read-create | current | Policy ID for this entry. A policy ID can apply to multiple rows of this table, all relevant policies are executed. Policy 0 (if populated) is applied to all p… |
| 1.3.6.1.3.83.1.6.5.1.5 | ColumndocsDevFilterPolicyStatus | read-create | current | Object used to create an entry in this table. |
| 1.3.6.1.3.83.1.6.5.1.6 | ColumndocsDevFilterPolicyPtr | read-create | current | This object points to a row in an applicable filter policy table. Currently, the only standard policy table is docsDevFilterTosTable. Per the textual conventio… |
| 1.3.6.1.3.83.1.6.6 | TabledocsDevFilterTosTable | not-accessible | current | Table used to describe Type of Service (TOS) bits processing. This table is an adjunct to the docsDevFilterIpTable, and the docsDevFilterPolicy table. Entries … |
| 1.3.6.1.3.83.1.6.6.1 | RowdocsDevFilterTosEntry | not-accessible | current | A TOS policy entry. |
| 1.3.6.1.3.83.1.6.6.1.1 | ColumndocsDevFilterTosIndex | not-accessible | current | The unique index for this row. There are no ordering requirements for this table and any valid index may be specified. |
| 1.3.6.1.3.83.1.6.6.1.2 | ColumndocsDevFilterTosStatus | read-create | current | The object used to create and delete entries in this table. A row created by specifying just this object results in a row which specifies no change to the TOS … |
| 1.3.6.1.3.83.1.6.6.1.3 | ColumndocsDevFilterTosAndMask | read-create | current | This value is bitwise AND'd with the matched packet's TOS bits. |
| 1.3.6.1.3.83.1.6.6.1.4 | ColumndocsDevFilterTosOrMask | read-create | current | After bitwise AND'ing with the above bits, the packet's TOS bits are bitwise OR'd with these bits, and the packet's TOS BITS are set to that value. |
| 1.3.6.1.3.83.1.6.7 | TabledocsDevFilterIpV6AuxTable | not-accessible | current | This table augments docsDevIpFilterTable with objects that allow filtering of IPv6 packets. The objects in this table exactly mirror the IPv4 objects in docsDe… |
| 1.3.6.1.3.83.1.6.7.1 | RowdocsDevFilterIpV6AuxEntry | not-accessible | current | This augments the existing objects in docsDevFilterIpEntry, but by default the objects in this entry have no effect on filtering as docsDevFilterIpType default… |
| 1.3.6.1.3.83.1.6.7.1.1 | ColumndocsDevFilterIpType | read-create | current | This object controls whether this filter entry refers to IP v4 or v6 type packets. If this object is ipv4, then the IpAddress objects docsDevFilterEntry apply,… |
| 1.3.6.1.3.83.1.6.7.1.2 | ColumndocsDevFilterIpV6Saddr | read-create | current | The source address IPv6 address or portion thereof that is to be matched for this filter. The packet's source address is first masked (and'ed) aginst docsDevFi… |
| 1.3.6.1.3.83.1.6.7.1.3 | ColumndocsDevFilterIpV6Smask | read-create | current | A bit mask that is to be applied to the packet's source address prior to matching. The mask is not necessarily the same as a subnet mask, the the 1's bits must… |
| 1.3.6.1.3.83.1.6.7.1.4 | ColumndocsDevFilterIpV6Daddr | read-create | current | The destination address IPv6 address or portion thereof that is to be matched for this filter. The packet's source address is first masked (and'ed) aginst docs… |
| 1.3.6.1.3.83.1.6.7.1.5 | ColumndocsDevFilterIpV6Dmask | read-create | current | A bit mask that is to be applied to the packet's destination address prior to matching. The mask is not necessarily the same as a subnet mask, the the 1's bits… |
| 1.3.6.1.3.83.1.7 | NodedocsDevCpe | |||
| 1.3.6.1.3.83.1.7.1 | ScalardocsDevCpeEnroll | read-write | current | This object controls the population of docsDevFilterCpeTable. If set to none, the filters must be set manually. If set to any, the CM wiretaps the packets orig… |
| 1.3.6.1.3.83.1.7.2 | ScalardocsDevCpeIpMax | read-write | current | This object controls the maximum number of CPEs allowed to be learned behind this device. If set to zero, any number of CPEs may connect up to the maximum perm… |
| 1.3.6.1.3.83.1.7.3 | TabledocsDevCpeTable | not-accessible | current | This table lists the IP addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, this … |
| 1.3.6.1.3.83.1.7.3.1 | RowdocsDevCpeEntry | not-accessible | current | An entry in the docsDevFilterCpeTable. There is one entry for each IP CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is ignored, otherwis… |
| 1.3.6.1.3.83.1.7.3.1.1 | ColumndocsDevCpeIp | not-accessible | current | The IP address to which this entry applies. N.B. Neither the all zeros or all ones addresses may be used as the value of this object. |
| 1.3.6.1.3.83.1.7.3.1.2 | ColumndocsDevCpeSource | read-only | current | This object describes how this entry was created. If the value is manual(2), this row was created by a network management action (either configuration, or SNMP… |
| 1.3.6.1.3.83.1.7.3.1.3 | ColumndocsDevCpeStatus | read-create | current | Standard object to manipulate rows. To create a row in this table, you only need to specify this object. Management stations SHOULD use the create-and-go mecha… |
| 1.3.6.1.3.83.1.7.4 | TabledocsDevCpeV6Table | not-accessible | current | This table lists the IP V6 addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, th… |
| 1.3.6.1.3.83.1.7.4.1 | RowdocsDevCpeV6Entry | not-accessible | current | An entry in the docsDevFilterCpeTable. There is one entry for each IP V6 CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is ignored, other… |
| 1.3.6.1.3.83.1.7.4.1.1 | ColumndocsDevCpeV6Ip | not-accessible | current | The IP address to which this entry applies. N.B. Neither the all zeros or all ones addresses may be used as values for this object. |
| 1.3.6.1.3.83.1.7.4.1.2 | ColumndocsDevCpeV6Source | read-only | current | This object describes how this entry was created. If the value is manual(2), this row was created by a network management action (either configuration, or SNMP… |
| 1.3.6.1.3.83.1.7.4.1.3 | ColumndocsDevCpeV6Status | read-create | current | Standard object to manipulate rows. To create a row in this table, you only need to specify this object. Management stations SHOULD use the create-and-go mecha… |
| 1.3.6.1.3.83.1.8 | TabledocsDevVacmAccessExtTable | not-accessible | current | This table extends the VACM access table by adding a set of objects which represent the interfaces to which the referenced VACM view applies. |
| 1.3.6.1.3.83.1.8.1 | RowdocsDevVacmAccessExtEntry | not-accessible | current | This entry logically extends vacmAccessEntry with two objects - an interface bit set and an InterfaceSet convience object which sets the bit set. |
| 1.3.6.1.3.83.1.8.1.1 | ColumndocsDevVacmAccessInterfaces | read-create | current | Specifies the set of interfaces this filter applies to. Each octet within the value of this object specifies a set of eight interfaces, with the first octet sp… |
| 1.3.6.1.3.83.1.8.1.2 | ColumndocsDevVacmAccessInterfaceSet | read-create | current | This is a convenience object for setting the value of docsDevVacmAccessInterfaces. Upon read this always returns other (1). Upon a valid set, this causes docsD… |
| 1.3.6.1.3.83.2 | NodedocsDevNotification | |||
| 1.3.6.1.3.83.4 | NodedocsDevConformanceV2 | |||
| 1.3.6.1.3.83.4.1 | NodedocsDevGroupsV2 | |||
| 1.3.6.1.3.83.4.1.1 | GroupdocsDevBaseGroupV2 | current | A collection of objects providing device status and control. | |
| 1.3.6.1.3.83.4.1.2 | GroupdocsDevNmAccessGroupV2 | deprecated | A collection of objects for controlling access to SNMP objects. Deprecated in favor of SNMPv3 and coexistence MIB. | |
| 1.3.6.1.3.83.4.1.3 | GroupdocsDevSoftwareGroupV2 | current | A collection of objects for controlling software downloads. | |
| 1.3.6.1.3.83.4.1.4 | GroupdocsDevServerGroupV2 | current | A collection of objects providing status about server provisioning. | |
| 1.3.6.1.3.83.4.1.5 | GroupdocsDevEventGroupV2 | current | A collection of objects used to control and monitor events. | |
| 1.3.6.1.3.83.4.1.6 | GroupdocsDevFilterGroupV2 | current | A collection of objects to specify filters at link layer and IP layer. | |
| 1.3.6.1.3.83.4.1.7 | GroupdocsDevCpeGroupV2 | current | A collection of objects used to control the number and specific values of IP addresses allowed for associated Customer Premises Equipment (CPE). | |
| 1.3.6.1.3.83.4.1.8 | GroupdocsDevDeprecatedGroup | deprecated | These objects have been deprecated to deal with the IPv6, SNMPv3 and redefinition of the CM as a multiple CPE device. They MAY be implemented, but will be remo… | |
| 1.3.6.1.3.83.4.1.9 | GroupdocsDevIpV6Group | current | These objects were added to deal with the filtering of IPV6 addresses. They MUST be implemented in any IPv6 aware cable modem. | |
| 1.3.6.1.3.83.4.1.10 | GroupdocsDevSnmpCoexistGroup | current | These objects were added to retain the capability to restrict SNMP access on a per interface basis. | |
| 1.3.6.1.3.83.4.2 | NodedocsDevCompliancesV2 | |||
| 1.3.6.1.3.83.4.2.1 | CompliancedocsDevBasicComplianceV2 | read-only | current | The compliance statement for MCNS Cable Modems and Cable Modem Termination Systems. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceSet | INTEGER { other (1), allCpe (2), allNetwork (3), allCpeEthernet (4), allCpeUsb (5), allCpeFirewire (6), allExternal (7), allInternal (8), all (9), application1 (10), application2 (11), application3 (12), application4 (13) } | current | This is a convenience syntax for setting the value of a bit set object which depicts a set of interfaces. Upon read an object of this type always returns other (1). Upon a valid set, this causes the related interface bi… |
| IpV4orV6Address | OCTET STRING (SIZE (0 | 4 | 16)) | current | An IP V4 or V6 address expressed as an octet string. The zero length string is equal to both 0.0.0.0 and the IPv6 :0 address. |