MIB Viewer

EXTREME-MPLS-MIB

52 objects
Extreme extensions to mplsTeStdMIB
OIDNameAccessStatusDescription
1.3.6.1.4.1.1916.1.37IdentityextremeMplsMIBExtreme extensions to mplsTeStdMIB
1.3.6.1.4.1.1916.1.37.0NodeextremeMplsNotifications
1.3.6.1.4.1.1916.1.37.0.1NotificationextremePwStatusChangecurrentThis notification is generated when the pwOperStatus object for a pseudowire transitions from up(1) to down(2) or from down(2) to up(1).
1.3.6.1.4.1.1916.1.37.0.2NotificationextremePwDeletedcurrentThis notification is generated when a PW has been deleted.
1.3.6.1.4.1.1916.1.37.0.3NotificationextremeMplsTunnelStatusChangecurrentThis notification is generated when the mplsTunnelOperStatus object for a te-lsp transitions from up(1) to down(2) or from down(2) to up(1). This new state is …
1.3.6.1.4.1.1916.1.37.0.4NotificationextremeMplsLdpSessionStatusChangecurrentThis notification is generated when the value of 'mplsLdpSessionState' (rfc3815) enters or leaves the 'operational(5)' state.
1.3.6.1.4.1.1916.1.37.0.5NotificationextremeVplsStatusChangecurrentThis notification is generated to inform recepients of the state of the Vpls. When all pseudowires in this Vpls are up or ready and the attachment circuit is u…
1.3.6.1.4.1.1916.1.37.1NodeextremeMplsScalars
1.3.6.1.4.1.1916.1.37.1.5ScalarextremePwUpDownNotificationEnableread-writecurrentIf this object is set to true(1), then it enables the emission of pwUp and pwDown notifications; otherwise these notifications are not emitted.
1.3.6.1.4.1.1916.1.37.1.6ScalarextremePwDeletedNotificationEnableread-writecurrentIf this object is set to true(1), then it enables the emission of pwDeleted notification; otherwise this notification is not emitted.
1.3.6.1.4.1.1916.1.37.1.7ScalarextremePwNotificationMaxRateread-writecurrentThis variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these n…
1.3.6.1.4.1.1916.1.37.1.8ScalarextremePwNotificationPwIndexaccessible-for-notifycurrentThis variable indicates the index of the pseudowire that either went up, down, or was deleted as reported by the corresponding notification. To obtain further …
1.3.6.1.4.1.1916.1.37.1.9ScalarextremePwNotificationPwOperStatusaccessible-for-notifycurrentThis variable is used to report the value of pwOperStatus in pwTable (RFC 5601) associated with the pseudowire that went up or down.
1.3.6.1.4.1.1916.1.37.1.10ScalarextremePwNotificationPeerAddrTypeaccessible-for-notifycurrentDenotes the address type of the peer node.
1.3.6.1.4.1.1916.1.37.1.11ScalarextremePwNotificationPeerAddraccessible-for-notifycurrentThis object contains the value of the peer node address.
1.3.6.1.4.1.1916.1.37.1.12ScalarextremeMplsNotifTunnelIndexaccessible-for-notifycurrentUniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Contains part of the index of a te tunnel that underwent state change.…
1.3.6.1.4.1.1916.1.37.1.13ScalarextremeMplsNotifTunnelInstanceaccessible-for-notifycurrentUniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs.
1.3.6.1.4.1.1916.1.37.1.14ScalarextremeMplsNotifTunnelIngressLSRIdaccessible-for-notifycurrentIdentity of the ingress LSR associated with this tunnel instance.
1.3.6.1.4.1.1916.1.37.1.15ScalarextremeMplsNotifTunnelEgressLSRIdaccessible-for-notifycurrentIdentity of the egress LSR associated with this tunnel instance.
1.3.6.1.4.1.1916.1.37.1.16ScalarextremeMplsNotifTunnelAdminStatusaccessible-for-notifycurrentReports the desired operational status of this tunnel.
1.3.6.1.4.1.1916.1.37.1.17ScalarextremeMplsNotifTunnelOperStatusaccessible-for-notifycurrentReports the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
1.3.6.1.4.1.1916.1.37.1.18ScalarextremeMplsNotifLdpEntityLdpIdaccessible-for-notifycurrentThe LDP identifier. This is the primary index to identify a row in the mplsLdpEntityTable (RFC 3815).
1.3.6.1.4.1.1916.1.37.1.19ScalarextremeMplsNotifLdpEntityIndexaccessible-for-notifycurrentThis index is used as a secondary index to uniquely identify a row in the mplsLdpEntityTable (RFC 3815). This object is meaningful to some but not all, LDP imp…
1.3.6.1.4.1.1916.1.37.1.20ScalarextremeMplsNotifLdpPeerLdpIdaccessible-for-notifycurrentThe LDP identifier of this LDP Peer.
1.3.6.1.4.1.1916.1.37.1.21ScalarextremeMplsNotifLdpSessionStateaccessible-for-notifycurrentThe current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.
1.3.6.1.4.1.1916.1.37.1.22ScalarextremeMplsNotifLdpSessionDiscontinuityTimeaccessible-for-notifycurrentThe initial value of this object is the value of sysUpTime when the entry was created in this table. Subsequent notifications report the time when the session …
1.3.6.1.4.1.1916.1.37.1.23ScalarextremeVplsNotifConfigIndexaccessible-for-notifycurrentUnique index for the conceptual row identifying a VPLS service in the vplsConfigTable.
1.3.6.1.4.1.1916.1.37.1.24ScalarextremeVplsNotifConfigVpnIdaccessible-for-notifycurrentThis objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. This object has the same value as vplsConfigVpnId in the vplsConfigTable for an…
1.3.6.1.4.1.1916.1.37.1.25ScalarextremeVplsNotifConfigAdminStatusaccessible-for-notifycurrentThe administrative state of the VPLS service. This object has the same value as vplsConfigAdminStatus in the vplsConfigTable for an index value equal to extrem…
1.3.6.1.4.1.1916.1.37.1.26ScalarextremeVplsNotifStatusOperStatusaccessible-for-notifycurrentThe current operational state of this VPLS Service. A value of up(1) indicates that all pseudo-wires for this vpls are up and the attachment circuit is up. A v…
1.3.6.1.4.1.1916.1.37.3NodeextremeVplsObjects
1.3.6.1.4.1.1916.1.37.3.1TableextremeVplsConfigTablenot-accessiblecurrentThis table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS).
1.3.6.1.4.1.1916.1.37.3.1.1RowextremeVplsConfigEntrynot-accessiblecurrentA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by extremeVplsConfigIndex, which uniquely identifies a si…
1.3.6.1.4.1.1916.1.37.3.1.1.1ColumnextremeVplsConfigIndexnot-accessiblecurrentUnique index for the conceptual row identifying a VPLS service.
1.3.6.1.4.1.1916.1.37.3.1.1.2ColumnextremeVplsConfigRedunTyperead-onlycurrentThis variable indicates the redundancy type for this vpls. Redundacy states can be None, EAPS, ESRP and STP.
1.3.6.1.4.1.1916.1.37.3.1.1.3ColumnextremeVplsConfigEAPSStatusread-onlycurrentThis variable indicates the EAPS redundancy status for this vpls. It displays Protected if the VLAN is protected, else Not Protected. EAPS Status displays the …
1.3.6.1.4.1.1916.1.37.3.1.1.4ColumnextremeVplsConfigESRPStateread-onlycurrentThis variable indicates the ESRP redundancy state for this vpls. ESRP states can have two values : Master and Slave PW will only be installed when ESRP is in t…
1.3.6.1.4.1.1916.1.37.3.2TableextremeVplsStatusTablenot-accessiblecurrentThis table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS).
1.3.6.1.4.1.1916.1.37.3.2.1RowextremeVplsStatusEntrynot-accessiblecurrentA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by extremeVplsConfigIndex, which uniquely identifies a si…
1.3.6.1.4.1.1916.1.37.3.2.1.1ColumnextremeVplsStatusIndexnot-accessiblecurrentUnique index for the conceptual row identifying a VPLS service.
1.3.6.1.4.1.1916.1.37.3.2.1.2ColumnextremeVplsOperStatusread-onlycurrentThis variable indicates the vpls operation Status. This is a special status provided which has values up,down and degraded. This is different from the vpls pw …
1.3.6.1.4.1.1916.1.37.3.3TableextremeVplsPeerTablenot-accessiblecurrentThis table provides information for monitoring Virtual Private Lan Services(VPLS) Peer Entries.
1.3.6.1.4.1.1916.1.37.3.3.1RowextremeVplsPeerEntrynot-accessiblecurrentThis entry contains information of all the peers belonging to a particular VPLS
1.3.6.1.4.1.1916.1.37.3.3.1.1ColumnextremeVplsIndexnot-accessiblecurrentUnique index for the conceptual row identifying a VPLS service.
1.3.6.1.4.1.1916.1.37.3.3.1.2ColumnextremeVplsPwBindIndexnot-accessiblecurrentSecondary Index for the conceptual row identifying a pseudowire within the PwEntry which MUST match an entry from the PW-STD-MIB's PwTable which represents an …
1.3.6.1.4.1.1916.1.37.3.3.1.3ColumnextremePwInstalledread-onlycurrentBoolean true or false indicating if PW is installed
1.3.6.1.4.1.1916.1.37.3.3.1.4ColumnextremePwModeread-onlycurrentThe peer mode of this pw. It indicates its current mode and the mode of the switch it is connected to. It can have the following values : Core-to-core, Core-to…
1.3.6.1.4.1.1916.1.37.3.3.1.5ColumnextremePwConfiguredRoleread-onlycurrentThe configured role of this pw. It applies only in the case the PWMode is Core-to-core. In this case, the configured role can either be Primary or Secondary. F…
1.3.6.1.4.1.1916.1.37.4NodeextremeL2VpnMplsNotificationHandler
1.3.6.1.4.1.1916.1.37.4.1ScalarextremeMPLSTrapsEnableread-writecurrentMpls Trap status. If enabled then all the mpls related traps will be sent out.
1.3.6.1.4.1.1916.1.37.4.2ScalarextremeL2VpnTrapsEnableread-writecurrentL2Vpn Trap status. If enabled then all the l2vpn related traps will be sent out.
Type Definitions
NameSyntaxStatusDescription
IndexIntegerUnsigned32 (1..4294967295)currentAn integer which may be used as a table index.