FJDARY-E102
645 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.211 | Nodefujitsu | |||
| 1.3.6.1.4.1.211.1 | Nodeproduct | |||
| 1.3.6.1.4.1.211.1.21 | Nodestorage | |||
| 1.3.6.1.4.1.211.1.21.1 | Nodensp | |||
| 1.3.6.1.4.1.211.1.21.1.102 | Nodefjdarye102 | |||
| 1.3.6.1.4.1.211.1.21.1.102.1 | NodefjdarySsp | |||
| 1.3.6.1.4.1.211.1.21.1.102.1.1 | ScalarfjdarySspMachineId | read-only | mandatory | This value indicates the identification number of this system. ttssssssssssssmmmmmmmmmmmmccssssssssssss | | | | | | | | | +-serial number(12byte) | | | +-check… |
| 1.3.6.1.4.1.211.1.21.1.102.1.2 | ScalarfjdarySspConfigDate | read-only | mandatory | The last date when the configuration was applied. yyyymmddHHMMSS | | | | | | | | | | | +-second | | | | +-minute | | | +-hour | | +-day | +-month +-year |
| 1.3.6.1.4.1.211.1.21.1.102.1.3 | ScalarfjdarySspWwnn | read-only | mandatory | The value of this object indecates the World Wide Node Name. |
| 1.3.6.1.4.1.211.1.21.1.102.1.4 | ScalarfjdarySspVenderId | read-only | mandatory | The value of this object indecates the Vender ID. |
| 1.3.6.1.4.1.211.1.21.1.102.1.5 | ScalarfjdarySspProductId | read-only | mandatory | The value of this object indecates the Product ID. |
| 1.3.6.1.4.1.211.1.21.1.102.1.6 | ScalarfjdarySspBoxId | read-only | mandatory | This value of a meaning within a user system. An initial value is the same as fjdarySspMachineId. |
| 1.3.6.1.4.1.211.1.21.1.102.1.7 | ScalarfjdarySspMaintenanceServiceLevel | read-only | mandatory | The value of this object indecates the support level of maintenance service. Level2 supports interface that strengthens the security level from level1. |
| 1.3.6.1.4.1.211.1.21.1.102.2 | NodefjdaryPconfig | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.1 | NodefjdaryCm | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.1.1 | ScalarfjdaryCmCount | read-only | mandatory | The number of CM(controller module)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2 | TablefjdaryCmTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1 | RowfjdaryCmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.1 | ColumnfjdaryCmIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCm entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.2 | ColumnfjdaryCmItemId | read-only | mandatory | The value of this object indicates the identification number of this CM. the following definition: 0x0100MM00 | +-fjdaryCmModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.3 | ColumnfjdaryCmStatus | read-only | mandatory | The value of this object indicates the state of this CM. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMainte… |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.4 | ColumnfjdaryCmSubStatus | read-only | mandatory | The value of this object indicates the state of this CM. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenance… |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.5 | ColumnfjdaryCmModuleId | read-only | mandatory | The value of this object indicates the module indicates of this CM. 0x10-0x1F shows CM. bit0-2 shows the CM slot number. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.6 | ColumnfjdaryCmRole | read-only | mandatory | The value of this object indicates the role of this CM. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.7 | ColumnfjdaryCmPartNo | read-only | mandatory | The value of this object indicates the Part No of this CM. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.8 | ColumnfjdaryCmSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this CM. |
| 1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.9 | ColumnfjdaryCmRevision | read-only | mandatory | The value of this object indicates the Revision of this CM. |
| 1.3.6.1.4.1.211.1.21.1.102.2.2 | NodefjdaryCmcpu | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.2.1 | ScalarfjdaryCmcpuCount | read-only | mandatory | The number of CM CPU informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2 | TablefjdaryCmcpuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1 | RowfjdaryCmcpuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.1 | ColumnfjdaryCmcpuIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCmcpu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.2 | ColumnfjdaryCmcpuItemId | read-only | mandatory | The value of this object indicates the identification number of this CM CPU. the following definition: 0x0100MM00 | +-fjdaryCmcpuModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.3 | ColumnfjdaryCmcpuStatus | read-only | mandatory | The value of this object indicates the state of this CM CPU. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMa… |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.4 | ColumnfjdaryCmcpuSubStatus | read-only | mandatory | The value of this object indicates the state of this CM CPU. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMainten… |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.5 | ColumnfjdaryCmcpuModuleId | read-only | mandatory | The value of this object indicates the module indicates of this CM CPU. 0x10-0x1F shows CM. bit0-2 shows the CM slot number and bit3 shows CPU number. |
| 1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.6 | ColumnfjdaryCmcpuRole | read-only | mandatory | The value of this object indicates the role of this CM CPU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.3 | NodefjdaryCa | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.3.1 | ScalarfjdaryCaCount | read-only | mandatory | The number of CA(channel adapter)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2 | TablefjdaryCaTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1 | RowfjdaryCaEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.1 | ColumnfjdaryCaIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCa entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.2 | ColumnfjdaryCaItemId | read-only | mandatory | The value of this object indicates the identification number of this CA. the following definition: 0x1000MM00 | +-fjdaryCaModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.3 | ColumnfjdaryCaStatus | read-only | mandatory | The value of this object indicates the state of this CA. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMainte… |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.4 | ColumnfjdaryCaSubStatus | read-only | mandatory | The value of this object indicates the state of this CA. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenance… |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.5 | ColumnfjdaryCaModuleId | read-only | mandatory | The value of this object indicates the module indicates of this CA. 0x40-0x7F shows CA. bit0-2 shows the CM slot number. bit4-5 shows the CA slot number in CM.… |
| 1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.6 | ColumnfjdaryCaType | read-only | mandatory | The value of this object indicates the type of this CA. |
| 1.3.6.1.4.1.211.1.21.1.102.2.4 | NodefjdaryCmmemory | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.4.1 | ScalarfjdaryCmmemoryCount | read-only | mandatory | The number of CM memory's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2 | TablefjdaryCmmemoryTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1 | RowfjdaryCmmemoryEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.1 | ColumnfjdaryCmmemoryIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCmmemory entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.2 | ColumnfjdaryCmmemoryItemId | read-only | mandatory | The value of this object indicates the identification number of this CM memory. the following definition: 0x0b00MM00 | +-fjdaryCmModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.3 | ColumnfjdaryCmmemoryStatus | read-only | mandatory | The value of this object indicates the state of this CM memory. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMg… |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.4 | ColumnfjdaryCmmemorySubStatus | read-only | mandatory | The value of this object indicates the state of this CM memory. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.5 | ColumnfjdaryCmmemoryCapacity | read-only | mandatory | The value of this object indicates the capacity of this CM memory. The unit is MB. |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.6 | ColumnfjdaryCmmemoryPartNo | read-only | mandatory | The value of this object indicates the Part No of this CM memory. |
| 1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.7 | ColumnfjdaryCmmemorySerialNo | read-only | mandatory | The value of this object indicates the Serial No of this CM memory. |
| 1.3.6.1.4.1.211.1.21.1.102.2.5 | NodefjdaryBud | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.5.1 | ScalarfjdaryBudCount | read-only | mandatory | The number of BUD's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2 | TablefjdaryBudTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2.1 | RowfjdaryBudEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.1 | ColumnfjdaryBudIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryBud entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.2 | ColumnfjdaryBudItemId | read-only | mandatory | The value of this object indicates the identification number of this BUD. the following definition: 0x0c00MM00 | +-fjdaryCmModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.3 | ColumnfjdaryBudStatus | read-only | mandatory | The value of this object indicates the state of this BUD. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.4 | ColumnfjdaryBudSubStatus | read-only | mandatory | The value of this object indicates the state of this BUD. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.6 | NodefjdaryFrt | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.6.1 | ScalarfjdaryFrtCount | read-only | mandatory | The number of FRT's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2 | TablefjdaryFrtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1 | RowfjdaryFrtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.1 | ColumnfjdaryFrtIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryFrt entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.2 | ColumnfjdaryFrtItemId | read-only | mandatory | The value of this object indicates the identification number of this FRT. the following definition: 0x4000MM00 | +-fjdaryFrtModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.3 | ColumnfjdaryFrtStatus | read-only | mandatory | The value of this object indicates the state of this FRT. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.4 | ColumnfjdaryFrtSubStatus | read-only | mandatory | The value of this object indicates the state of this FRT. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.5 | ColumnfjdaryFrtModuleId | read-only | mandatory | The value of this object indicates the module indicates of this FRT. 0xF0-0xF3 shows FRT. bit0-3 shows the FRT slot number. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.6 | ColumnfjdaryFrtFirmInfo | read-only | mandatory | The value of this object indicates the firmware information of this FRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.7 | ColumnfjdaryFrtPartNo | read-only | mandatory | The value of this object indicates the Part No of this FRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.8 | ColumnfjdaryFrtSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this FRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.9 | ColumnfjdaryFrtRevision | read-only | mandatory | The value of this object indicates the Revision of this FRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7 | NodefjdaryBrt | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.7.1 | ScalarfjdaryBrtCount | read-only | mandatory | The number of BRT's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2 | TablefjdaryBrtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1 | RowfjdaryBrtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.1 | ColumnfjdaryBrtIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryBrt entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.2 | ColumnfjdaryBrtItemId | read-only | mandatory | The value of this object indicates the identification number of this BRT. the following definition: 0x5000MM00 | +-fjdaryBrtModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.3 | ColumnfjdaryBrtStatus | read-only | mandatory | The value of this object indicates the state of this BRT. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.4 | ColumnfjdaryBrtSubStatus | read-only | mandatory | The value of this object indicates the state of this BRT. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.5 | ColumnfjdaryBrtModuleId | read-only | mandatory | The value of this object indicates the module indicates of this BRT. 0xB0-0xBF shows BRT. bit0-3 shows the BRT slot number. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.6 | ColumnfjdaryBrtPartNo | read-only | mandatory | The value of this object indicates the Part No of this BRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.7 | ColumnfjdaryBrtSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this BRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.8 | ColumnfjdaryBrtRevision | read-only | mandatory | The value of this object indicates the Revision of this BRT. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8 | NodefjdarySvc | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.8.1 | ScalarfjdarySvcCount | read-only | mandatory | The number of SVC's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2 | TablefjdarySvcTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1 | RowfjdarySvcEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.1 | ColumnfjdarySvcIndex | read-only | mandatory | The value of this object uniquely identifies this fjdarySvc entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.2 | ColumnfjdarySvcItemId | read-only | mandatory | The value of this object indicates the identification number of this SVC. the following definition: 0x6000MM00 | +-fjdarySvcModuleId |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.3 | ColumnfjdarySvcStatus | read-only | mandatory | The value of this object indicates the state of this SVC. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.4 | ColumnfjdarySvcSubStatus | read-only | mandatory | The value of this object indicates the state of this SVC. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.5 | ColumnfjdarySvcModuleId | read-only | mandatory | The value of this object indicates the module indicates of this SVC. 0xE0-0xE1 shows SVC. bit0-3 shows the SVC slot number. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.6 | ColumnfjdarySvcFirmInfo | read-only | mandatory | The value of this object indicates the firmware information of this SVC. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.7 | ColumnfjdarySvcPartNo | read-only | mandatory | The value of this object indicates the Part No of this SVC. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.8 | ColumnfjdarySvcSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this SVC. |
| 1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.9 | ColumnfjdarySvcRevision | read-only | mandatory | The value of this object indicates the Revision of this SVC. |
| 1.3.6.1.4.1.211.1.21.1.102.2.9 | NodefjdaryFanu | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.9.1 | ScalarfjdaryFanuCount | read-only | mandatory | The number of FANU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2 | TablefjdaryFanuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1 | RowfjdaryFanuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.1 | ColumnfjdaryFanuIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryFanu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.2 | ColumnfjdaryFanuItemId | read-only | mandatory | The value of this object indicates the identification number of this FANU. the following definition: 0x7100SS00 | +-slot number |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.3 | ColumnfjdaryFanuStatus | read-only | mandatory | The value of this object indicates the state of this FANU. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.4 | ColumnfjdaryFanuSubStatus | read-only | mandatory | The value of this object indicates the state of this FANU. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.5 | ColumnfjdaryFanuPartNo | read-only | mandatory | The value of this object indicates the Part No of this FANU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.6 | ColumnfjdaryFanuSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this FANU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.7 | ColumnfjdaryFanuRevision | read-only | mandatory | The value of this object indicates the Revision of this FANU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.10 | NodefjdaryOpnl | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.10.1 | ScalarfjdaryOpnlCount | read-only | mandatory | The number of OPNL's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2 | TablefjdaryOpnlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2.1 | RowfjdaryOpnlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.1 | ColumnfjdaryOpnlIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryOpnl entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.2 | ColumnfjdaryOpnlItemId | read-only | mandatory | The value of this object indicates the identification number of this OPNL. the following definition: 0x72000000 |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.3 | ColumnfjdaryOpnlStatus | read-only | mandatory | The value of this object indicates the state of this OPNL. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.4 | ColumnfjdaryOpnlSubStatus | read-only | mandatory | The value of this object indicates the state of this OPNL. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.11 | NodefjdaryBbu | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.11.1 | ScalarfjdaryBbuCount | read-only | mandatory | The number of BBU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2 | TablefjdaryBbuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1 | RowfjdaryBbuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.1 | ColumnfjdaryBbuIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryBbu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.2 | ColumnfjdaryBbuItemId | read-only | mandatory | The value of this object indicates the identification number of this BBU. the following definition: 0x7500SS00 | +-slot number |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.3 | ColumnfjdaryBbuStatus | read-only | mandatory | The value of this object indicates the state of this BBU. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.4 | ColumnfjdaryBbuSubStatus | read-only | mandatory | The value of this object indicates the state of this BBU. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.5 | ColumnfjdaryBbuCapacity | read-only | mandatory | The value of this object indicates the capacity of this BBU. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.6 | ColumnfjdaryBbuPartNo | read-only | mandatory | The value of this object indicates the Part No of this BBU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.7 | ColumnfjdaryBbuSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this BBU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.8 | ColumnfjdaryBbuRevision | read-only | mandatory | The value of this object indicates the Revision of this BBU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.12 | NodefjdaryCe | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.12.1 | ScalarfjdaryCeCount | read-only | mandatory | The number of CE(controller enclosure)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2 | TablefjdaryCeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2.1 | RowfjdaryCeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.1 | ColumnfjdaryCeIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCe entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.2 | ColumnfjdaryCeItemId | read-only | mandatory | The value of this object indicates the identification number of this CE. the following definition: 0x70000000 |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.3 | ColumnfjdaryCeStatus | read-only | mandatory | The value of this object indicates the state of this CE. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMainte… |
| 1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.4 | ColumnfjdaryCeSubStatus | read-only | mandatory | The value of this object indicates the state of this CE. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenance… |
| 1.3.6.1.4.1.211.1.21.1.102.2.13 | NodefjdaryCeinletthml | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.13.1 | ScalarfjdaryCeinletthmlCount | read-only | mandatory | The number of CE inlet thermal sensor's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2 | TablefjdaryCeinletthmlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2.1 | RowfjdaryCeinletthmlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.1 | ColumnfjdaryCeinletthmlIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCeinletthml entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.2 | ColumnfjdaryCeinletthmlItemId | read-only | mandatory | The value of this object indicates the identification number of this CE inlet thermal sensor. the following definition: 0x7b000000 |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.3 | ColumnfjdaryCeinletthmlStatus | read-only | mandatory | The value of this object indicates the state of this CE inlet thermal sensor. But, it doesn't become warning or alarm when maintaining it. (In the maintenance … |
| 1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.4 | ColumnfjdaryCeinletthmlSubStatus | read-only | mandatory | The value of this object indicates the state of this CE inlet thermal sensor. It becomes warning and alarm while even maintaining it. (In the maintenance work,… |
| 1.3.6.1.4.1.211.1.21.1.102.2.14 | NodefjdaryCethml | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.14.1 | ScalarfjdaryCethmlCount | read-only | mandatory | The number of CE thermal sensor's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2 | TablefjdaryCethmlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2.1 | RowfjdaryCethmlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.1 | ColumnfjdaryCethmlIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCethml entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.2 | ColumnfjdaryCethmlItemId | read-only | mandatory | The value of this object indicates the identification number of this CE thermal sensor. the following definition: 0x7a000000 |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.3 | ColumnfjdaryCethmlStatus | read-only | mandatory | The value of this object indicates the state of this CE thermal sensor. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, … |
| 1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.4 | ColumnfjdaryCethmlSubStatus | read-only | mandatory | The value of this object indicates the state of this CE thermal sensor. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdar… |
| 1.3.6.1.4.1.211.1.21.1.102.2.15 | NodefjdaryCpsu | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.15.1 | ScalarfjdaryCpsuCount | read-only | mandatory | The number of CPSU(power supply unit mounted on CE)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2 | TablefjdaryCpsuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1 | RowfjdaryCpsuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.1 | ColumnfjdaryCpsuIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCpsu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.2 | ColumnfjdaryCpsuItemId | read-only | mandatory | The value of this object indicates the identification number of this CPSU. the following definition: 0x7300SS00 | +-slot number |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.3 | ColumnfjdaryCpsuStatus | read-only | mandatory | The value of this object indicates the state of this CPSU. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.4 | ColumnfjdaryCpsuSubStatus | read-only | mandatory | The value of this object indicates the state of this CPSU. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.5 | ColumnfjdaryCpsuPartNo | read-only | mandatory | The value of this object indicates the Part No of this CPSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.6 | ColumnfjdaryCpsuSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this CPSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.7 | ColumnfjdaryCpsuRevision | read-only | mandatory | The value of this object indicates the Revision of this CPSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.16 | NodefjdaryDe | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.16.1 | ScalarfjdaryDeCount | read-only | mandatory | The number of DE(drive enclosure)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2 | TablefjdaryDeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1 | RowfjdaryDeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.1 | ColumnfjdaryDeIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryDe entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.2 | ColumnfjdaryDeItemId | read-only | mandatory | The value of this object indicates the identification number of this DE. the following definition: 0xd000DD00 | +-fjdaryDeId |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.3 | ColumnfjdaryDeStatus | read-only | mandatory | The value of this object indicates the state of this DE. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMainte… |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.4 | ColumnfjdaryDeSubStatus | read-only | mandatory | The value of this object indicates the state of this DE. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenance… |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.5 | ColumnfjdaryDeId | read-only | mandatory | The value of this object indicates the identification of this DE. |
| 1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.6 | ColumnfjdaryDeType | read-only | mandatory | The value of this object indicates the type of this DE. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17 | NodefjdaryIom | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.17.1 | ScalarfjdaryIomCount | read-only | mandatory | The number of IOM6's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2 | TablefjdaryIomTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1 | RowfjdaryIomEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.1 | ColumnfjdaryIomIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryIom entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.2 | ColumnfjdaryIomItemId | read-only | mandatory | The value of this object indicates the identification number of this IOM6. the following definition: 0x9000DDSS | | | +-slot number +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.3 | ColumnfjdaryIomStatus | read-only | mandatory | The value of this object indicates the state of this IOM6. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.4 | ColumnfjdaryIomSubStatus | read-only | mandatory | The value of this object indicates the state of this IOM6. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.5 | ColumnfjdaryIomFirmInfo | read-only | mandatory | The value of this object indicates the firmware information of this IOM6. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.6 | ColumnfjdaryIomPartNo | read-only | mandatory | The value of this object indicates the Part No of this IOM6. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.7 | ColumnfjdaryIomSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this IOM6. |
| 1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.8 | ColumnfjdaryIomRevision | read-only | mandatory | The value of this object indicates the Revision of this IOM6. |
| 1.3.6.1.4.1.211.1.21.1.102.2.18 | NodefjdaryPsu | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.18.1 | ScalarfjdaryPsuCount | read-only | mandatory | The number of PSU(power supply unit)'s informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2 | TablefjdaryPsuTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1 | RowfjdaryPsuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.1 | ColumnfjdaryPsuIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPsu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.2 | ColumnfjdaryPsuItemId | read-only | mandatory | The value of this object indicates the identification number of this PSU. the following definition: 0xd200DDSS | | | +-slot number +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.3 | ColumnfjdaryPsuStatus | read-only | mandatory | The value of this object indicates the state of this PSU. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMaint… |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.4 | ColumnfjdaryPsuSubStatus | read-only | mandatory | The value of this object indicates the state of this PSU. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenanc… |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.5 | ColumnfjdaryPsuPartNo | read-only | mandatory | The value of this object indicates the Part No of this PSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.6 | ColumnfjdaryPsuSerialNo | read-only | mandatory | The value of this object indicates the Serial No of this PSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.7 | ColumnfjdaryPsuRevision | read-only | mandatory | The value of this object indicates the Revision of this PSU. |
| 1.3.6.1.4.1.211.1.21.1.102.2.19 | NodefjdaryDeinletthml | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.19.1 | ScalarfjdaryDeinletthmlCount | read-only | mandatory | The number of DE inlet thermal sensor's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2 | TablefjdaryDeinletthmlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2.1 | RowfjdaryDeinletthmlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.1 | ColumnfjdaryDeinletthmlIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryDeinletthml entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.2 | ColumnfjdaryDeinletthmlItemId | read-only | mandatory | The value of this object indicates the identification number of this DE inlet thermal sensor. the following definition: 0xdb00DD00 | +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.3 | ColumnfjdaryDeinletthmlStatus | read-only | mandatory | The value of this object indicates the state of this DE inlet thermal sensor. But, it doesn't become warning or alarm when maintaining it. (In the maintenance … |
| 1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.4 | ColumnfjdaryDeinletthmlSubStatus | read-only | mandatory | The value of this object indicates the state of this DE inlet thermal sensor. It becomes warning and alarm while even maintaining it. (In the maintenance work,… |
| 1.3.6.1.4.1.211.1.21.1.102.2.20 | NodefjdaryDethml | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.20.1 | ScalarfjdaryDethmlCount | read-only | mandatory | The number of DE thermal sensor's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2 | TablefjdaryDethmlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2.1 | RowfjdaryDethmlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.1 | ColumnfjdaryDethmlIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryDethml entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.2 | ColumnfjdaryDethmlItemId | read-only | mandatory | The value of this object indicates the identification number of this DE thermal sensor. the following definition: 0xda00DD00 | +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.3 | ColumnfjdaryDethmlStatus | read-only | mandatory | The value of this object indicates the state of this DE thermal sensor. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, … |
| 1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.4 | ColumnfjdaryDethmlSubStatus | read-only | mandatory | The value of this object indicates the state of this DE thermal sensor. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdar… |
| 1.3.6.1.4.1.211.1.21.1.102.2.21 | NodefjdaryDisk | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.21.1 | ScalarfjdaryDiskCount | read-only | mandatory | The number of DISK's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2 | TablefjdaryDiskTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1 | RowfjdaryDiskEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.1 | ColumnfjdaryDiskIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryDisk entry. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.2 | ColumnfjdaryDiskItemId | read-only | mandatory | The value of this object indicates the identification number of this DISK. the following definition: 0x8000DDSS | | | +-slot number +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.3 | ColumnfjdaryDiskStatus | read-only | mandatory | The value of this object indicates the state of this DISK. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.4 | ColumnfjdaryDiskSubStatus | read-only | mandatory | The value of this object indicates the state of this DISK. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.5 | ColumnfjdaryDiskCompStatus | read-only | mandatory | The value of this object indicates the state of this DISK. But, it doesn't become warning or alarm when maintaining it. (In the maintenance work, fjdaryMgtMain… |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.6 | ColumnfjdaryDiskCompSubStatus | read-only | mandatory | The value of this object indicates the state of this DISK. It becomes warning and alarm while even maintaining it. (In the maintenance work, fjdaryMgtMaintenan… |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.7 | ColumnfjdaryDiskPlun | read-only | mandatory | The value of this object indicates the PLUN of this DISK. the following definition: 0xDDSS | | | +-slot number +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.8 | ColumnfjdaryDiskPurpose | read-only | mandatory | The value of this object indicates the purpose of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.9 | ColumnfjdaryDiskType | read-only | mandatory | The value of this object indicates the type of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.10 | ColumnfjdaryDiskWwn | read-only | mandatory | The value of this object indicates the world wide name of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.11 | ColumnfjdaryDiskVenderId | read-only | mandatory | The value of this object indicates the vender of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.12 | ColumnfjdaryDiskProductId | read-only | mandatory | The value of this object indicates the product of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.13 | ColumnfjdaryDiskFwRevision | read-only | mandatory | The value of this object indicates the firmware revision of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.14 | ColumnfjdaryDiskDateCode | read-only | mandatory | The value of this object indicates the date code of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.15 | ColumnfjdaryDiskCfgRevision | read-only | mandatory | The value of this object indicates the configuration revision of this DISK. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22 | NodefjdaryLanport | |||
| 1.3.6.1.4.1.211.1.21.1.102.2.22.1 | ScalarfjdaryLanportCount | read-only | mandatory | The number of LAN port's informations (regardless of theier current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2 | TablefjdaryLanportTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2.1 | RowfjdaryLanportEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.1 | ColumnfjdaryLanportIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryLanport entry. The number of the unit that mounts LAN port is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.2 | ColumnfjdaryLanportStatus0 | read-only | mandatory | The value of this object indicates the MNT port state. linkup : Link up state undefined : Undefined state linkdown : Link down state unknown : Unknown state |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.3 | ColumnfjdaryLanportStatus1 | read-only | mandatory | The value of this object indicates the RMT port state. linkup : Link up state undefined : Undefined state linkdown : Link down state unknown : Unknown state |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.4 | ColumnfjdaryLanportStatus2 | read-only | mandatory | The value of this object indicates the FST port state. linkup : Link up state undefined : Undefined state linkdown : Link down state unknown : Unknown state |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3 | TablefjdaryLanportHwAdTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3.1 | RowfjdaryLanportHwAdEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.1 | ColumnfjdaryLanportHwAdIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryLanportHwAd entry. The number of the unit that mounts LAN port is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.2 | ColumnfjdaryLanportHwAddress0 | read-only | mandatory | The value of this object indicates the MNT port's MAC address. If this value is not applicable, return all zero's. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.3 | ColumnfjdaryLanportHwAddress1 | read-only | mandatory | The value of this object indicates the RMT port's MAC address. If this value is not applicable, return all zero's. |
| 1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.4 | ColumnfjdaryLanportHwAddress2 | read-only | mandatory | The value of this object indicates the FST port's MAC address. If this value is not applicable, return all zero's. |
| 1.3.6.1.4.1.211.1.21.1.102.3 | NodefjdaryLconfig | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.1 | NodefjdaryCaPort | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.1.1 | ScalarfjdaryCaPortCount | read-only | mandatory | The number of CA port's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2 | TablefjdaryCaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1 | RowfjdaryCaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.1 | ColumnfjdaryCaPortIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryCaPort entry. Ascending order of fjdaryCaModuleId. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.2 | ColumnfjdaryCaPortPortInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.3 | ColumnfjdaryCaPortiscsiInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.4 | ColumnfjdaryCaPortiscsiName | read-only | mandatory | The value of this object indicates an iscsi name of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.5 | ColumnfjdaryCaPortiscsiAliasName | read-only | mandatory | The value of this object indicates an iscsi alias name of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.6 | ColumnfjdaryCaPortiscsiIpAddress | read-only | mandatory | The value of this object indicates an iscsi ip address of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.7 | ColumnfjdaryCaPortiscsiSubnetMask | read-only | mandatory | The value of this object indicates an iscsi subnet mask of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.8 | ColumnfjdaryCaPortiscsiIsnsServer | read-only | mandatory | The value of this object indicates an isns server ip address of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.9 | ColumnfjdaryCaPortMode | read-only | mandatory | The value of this object indicates the mode of this CA port. |
| 1.3.6.1.4.1.211.1.21.1.102.3.2 | NodefjdaryOlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.2.1 | ScalarfjdaryOluCount | read-only | mandatory | The number of OLU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.2.2 | TablefjdaryOluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.2.2.1 | RowfjdaryOluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.2.2.1.1 | ColumnfjdaryOluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryOlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.2.2.1.2 | ColumnfjdaryOluInfoTable | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.3 | NodefjdarySlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.3.1 | ScalarfjdarySluCount | read-only | mandatory | The number of SLU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.3.2 | TablefjdarySluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.3.2.1 | RowfjdarySluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.3.2.1.1 | ColumnfjdarySluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdarySlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.3.2.1.2 | ColumnfjdarySluInfoTable | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4 | NodefjdaryRlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.4.1 | ScalarfjdaryRluCount | read-only | mandatory | The number of RLU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2 | TablefjdaryRluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1 | RowfjdaryRluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.1 | ColumnfjdaryRluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryRlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.2 | ColumnfjdaryRluInfoTable0 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.3 | ColumnfjdaryRluInfoTable1 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.4 | ColumnfjdaryRluInfoTable2 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.5 | ColumnfjdaryRluInfoTable3 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.5 | NodefjdaryDlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.5.1 | ScalarfjdaryDluCount | read-only | mandatory | The number of DLU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.5.2 | TablefjdaryDluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.5.2.1 | RowfjdaryDluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.5.2.1.1 | ColumnfjdaryDluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryDlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.5.2.1.2 | ColumnfjdaryDluInfoTable | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.6 | NodefjdaryMlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.6.1 | ScalarfjdaryMluCount | read-only | mandatory | The number of MLU's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.6.2 | TablefjdaryMluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.6.2.1 | RowfjdaryMluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.6.2.1.1 | ColumnfjdaryMluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryMlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.6.2.1.2 | ColumnfjdaryMluInfoTable | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7 | NodefjdaryOpenmap | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.7.1 | ScalarfjdaryOpenmapCount | read-only | mandatory | The number of open volume mapping table's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2 | TablefjdaryOpenmapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1 | RowfjdaryOpenmapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.1 | ColumnfjdaryOpenmapIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryOpenmap entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.2 | ColumnfjdaryOpenmapInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.3 | ColumnfjdaryOpenmapHostTable0 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.4 | ColumnfjdaryOpenmapHostTable1 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.5 | ColumnfjdaryOpenmapHostTable2 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.6 | ColumnfjdaryOpenmapHostTable3 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.7 | ColumnfjdaryOpenmapHostTable4 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.8 | ColumnfjdaryOpenmapHostTable5 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.9 | ColumnfjdaryOpenmapHostTable6 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.10 | ColumnfjdaryOpenmapHostTable7 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8 | NodefjdaryLunmap | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.8.1 | ScalarfjdaryLunmapCount | read-only | mandatory | The number of LUN mapping table's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2 | TablefjdaryLunmapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1 | RowfjdaryLunmapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.1 | ColumnfjdaryLunmapIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryLunmap entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.2 | ColumnfjdaryLunmapInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.3 | ColumnfjdaryLunmapTable0 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.4 | ColumnfjdaryLunmapTable1 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.5 | ColumnfjdaryLunmapTable2 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.6 | ColumnfjdaryLunmapTable3 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9 | NodefjdaryAffinityGrp | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.9.1 | ScalarfjdaryAffinityGrpCount | read-only | mandatory | The number of affinity group table's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2 | TablefjdaryAffinityGrpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1 | RowfjdaryAffinityGrpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.1 | ColumnfjdaryAffinityGrpIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryAffinityGrp entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.2 | ColumnfjdaryAffinityGrpInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.3 | ColumnfjdaryAffinityGrpTable0 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.4 | ColumnfjdaryAffinityGrpTable1 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.5 | ColumnfjdaryAffinityGrpTable2 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.6 | ColumnfjdaryAffinityGrpTable3 | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.10 | NodefjdaryHostwwn | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.10.1 | ScalarfjdaryHostwwnCount | read-only | mandatory | The number of host wwn table's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.10.2 | TablefjdaryHostwwnTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.10.2.1 | RowfjdaryHostwwnEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.10.2.1.1 | ColumnfjdaryHostwwnIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryHostwwn entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.10.2.1.2 | ColumnfjdaryHostwwnWWN | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.11 | NodefjdaryResetpath | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.11.1 | ScalarfjdaryResetpathCount | read-only | mandatory | The number of reset path group table's informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.11.2 | TablefjdaryResetpathTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.11.2.1 | RowfjdaryResetpathEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.11.2.1.1 | ColumnfjdaryResetpathIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryResetpath entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.11.2.1.2 | ColumnfjdaryResetpathGroup | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.12 | NodefjdaryHostiscsi | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.12.1 | ScalarfjdaryHostiscsiCount | read-only | mandatory | The number of host iscsi informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2 | TablefjdaryHostiscsiTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1 | RowfjdaryHostiscsiEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.1 | ColumnfjdaryHostiscsiIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryHostiscsi entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.2 | ColumnfjdaryHostiscsiDefine | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.3 | ColumnfjdaryHostiscsiName | read-only | mandatory | The value of this object shows iscsi name of a host. |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.4 | ColumnfjdaryHostiscsiAliasName | read-only | mandatory | The value of this object shows alias name of a host. |
| 1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.5 | ColumnfjdaryHostiscsiIpAddress | read-only | mandatory | The value of this object shows ip address of a host. |
| 1.3.6.1.4.1.211.1.21.1.102.3.13 | NodefjdaryHostResponse | |||
| 1.3.6.1.4.1.211.1.21.1.102.3.13.1 | ScalarfjdaryHostResponseCount | read-only | mandatory | The number of host response informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.3.13.2 | TablefjdaryHostResponseTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.13.2.1 | RowfjdaryHostResponseEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.3.13.2.1.1 | ColumnfjdaryHostResponseIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryHostResponse entry. |
| 1.3.6.1.4.1.211.1.21.1.102.3.13.2.1.2 | ColumnfjdaryHostResponseInfoTable | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.4 | NodefjdaryFirm | |||
| 1.3.6.1.4.1.211.1.21.1.102.4.1 | ScalarfjdaryFirmTotal | read-only | mandatory | The value of this object indicates the total firmware information. VVLLSSSS | | | | | +-firmware suffix | +-firmware level +-firmware version |
| 1.3.6.1.4.1.211.1.21.1.102.5 | NodefjdaryPerformance | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.1 | NodefjdaryPfInfo | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.1.1 | ScalarfjdaryPfInfoVersion | read-only | mandatory | This is the version for this performance information data. |
| 1.3.6.1.4.1.211.1.21.1.102.5.1.2 | ScalarfjdaryPfInfoLevel | read-only | mandatory | This is the level for this performance information data. |
| 1.3.6.1.4.1.211.1.21.1.102.5.1.3 | ScalarfjdaryPfInfoIntervalTime | read-only | mandatory | This indicates the acquisition interval of the performance information data. The unit is a second. If this value is not applicable, return zero. |
| 1.3.6.1.4.1.211.1.21.1.102.5.1.4 | ScalarfjdaryPfInfoUpdateTime | read-only | mandatory | This indicates the update time of the performance information data. The unit is a second. |
| 1.3.6.1.4.1.211.1.21.1.102.5.1.5 | ScalarfjdaryPfInfoDataValid | read-only | mandatory | This shows whether the performance information data to be acquired exists. |
| 1.3.6.1.4.1.211.1.21.1.102.5.1.6 | ScalarfjdaryPfInfoIOoffloadingValid | read-only | mandatory | This indicates whether the fjdaryPfCmRoeBusy1 is valid. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2 | NodefjdaryPfOlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.2.1 | ScalarfjdaryPfOluCount | read-only | mandatory | The number of OLU's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2 | TablefjdaryPfOluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1 | RowfjdaryPfOluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.1 | ColumnfjdaryPfOluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfOlu entry. This is the same as OLUN. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.2 | ColumnfjdaryPfOluRdIOPS | read-only | mandatory | This shows the READ IOPS related to host I/O processing. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.3 | ColumnfjdaryPfOluWtIOPS | read-only | mandatory | This shows the WRITE IOPS related to host I/O processing. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.4 | ColumnfjdaryPfOluAdCpRdIOPS | read-only | mandatory | This shows the READ IOPS related to advanced copy processing. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.5 | ColumnfjdaryPfOluAdCpWtIOPS | read-only | mandatory | This shows the WRITE IOPS related to advanced copy processing. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.6 | ColumnfjdaryPfOluRdTp | read-only | mandatory | This shows the READ Throughput related to host I/O processing. The unit is MB/sec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.7 | ColumnfjdaryPfOluWtTp | read-only | mandatory | This shows the WRITE Throughput related to host I/O processing. The unit is MB/sec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.8 | ColumnfjdaryPfOluAdCpRdTp | read-only | mandatory | This shows the READ Throughput related to advanced copy processing. The unit is MB/sec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.9 | ColumnfjdaryPfOluAdCpWtTp | read-only | mandatory | This shows the WRITE Throughput related to advanced copy processing. The unit is MB/sec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.10 | ColumnfjdaryPfOluRdRspTime | read-only | mandatory | This indicates the average of READ Response Time related to host I/O processing. The unit is msec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.11 | ColumnfjdaryPfOluWtRspTime | read-only | mandatory | This indicates the average of WRITE Response Time related to host I/O processing. The unit is msec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.12 | ColumnfjdaryPfOluRdCacheHit | read-only | mandatory | This shows the READ Cache Hit Rate related to host I/O processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.13 | ColumnfjdaryPfOluWtCacheHit | read-only | mandatory | This shows the WRITE Cache Hit Rate related to host I/O processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.14 | ColumnfjdaryPfOluAdRdCacheHit | read-only | mandatory | This shows the READ Cache Hit Rate related to advanced copy processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.15 | ColumnfjdaryPfOluAdWtCacheHit | read-only | mandatory | This shows the WRITE Cache Hit Rate related to advanced copy processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.16 | ColumnfjdaryPfOluRdPreFetchHit | read-only | mandatory | This shows the READ Prefetch Hit Rate related to host I/O processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.17 | ColumnfjdaryPfOluAdRdPreFetchHit | read-only | mandatory | This shows the READ Prefetch Hit Rate related to advanced copy processing. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.3 | NodefjdaryPfDisk | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.3.1 | ScalarfjdaryPfDiskCount | read-only | mandatory | The number of DISK's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.3.2 | TablefjdaryPfDiskTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.3.2.1 | RowfjdaryPfDiskEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.1 | ColumnfjdaryPfDiskIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDisk entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.2 | ColumnfjdaryPfDiskPlun | read-only | mandatory | This shows PLU number concerned DISK. the following definition: 0xDDSS | | | +-slot number +-DE ID |
| 1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.3 | ColumnfjdaryPfDiskBusy | read-only | mandatory | This shows DISK busy rate. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4 | NodefjdaryPfCm | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.4.1 | ScalarfjdaryPfCmCount | read-only | mandatory | The number of CM's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2 | TablefjdaryPfCmTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1 | RowfjdaryPfCmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.1 | ColumnfjdaryPfCmIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfCm entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.2 | ColumnfjdaryPfCmBusy | read-only | mandatory | This shows a busy rate of CPU. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.3 | ColumnfjdaryPfCmRoeBusy | read-only | mandatory | This shows a busy rate of ROE. The unit is percent. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.4 | ColumnfjdaryPfCmCpRemain | read-only | mandatory | This shows the amount of the copy remainder. The unit is Byte. |
| 1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.5 | ColumnfjdaryPfCmRoeBusy1 | read-only | mandatory | This shows a busy rate of ROE#1. The unit is percent. When fjdaryPfInfoIOoffloadingValid is valid, this information is effective. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5 | NodefjdaryPfCaPort | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.5.1 | ScalarfjdaryPfCaPortCount | read-only | mandatory | The number of CA port's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2 | TablefjdaryPfCaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1 | RowfjdaryPfCaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.1 | ColumnfjdaryPfCaPortIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfCaPort entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.2 | ColumnfjdaryPfCaPortMode | read-only | mandatory | This shows a mode concerned CA. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.3 | ColumnfjdaryPfCaPortRdIOPS | read-only | mandatory | This shows the READ IOPS for the CA,CARA mode. The Initiator IOPS is shown for RA,Initiator mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.4 | ColumnfjdaryPfCaPortWtIOPS | read-only | mandatory | This shows the WRITE IOPS for the CA,CARA mode. The Target IOPS is shown for the RA mode. This information is an invalid value for the Initiator mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.5 | ColumnfjdaryPfCaPortRdTp | read-only | mandatory | This shows the amount of the READ Throughput for the CA,CARA mode. The Initiator Throughput is shown for RA,Initiator mode. The unit is MB/sec. |
| 1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.6 | ColumnfjdaryPfCaPortWtTp | read-only | mandatory | This shows the amount of the WRITE Throughput for the CA,CARA mode. The Target Throughput is shown for the RA mode. The unit is MB/sec. This information is an … |
| 1.3.6.1.4.1.211.1.21.1.102.5.6 | NodefjdaryPfDtOlu | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.6.1 | ScalarfjdaryPfDtOluCount | read-only | mandatory | The number of OLU's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.6.2 | TablefjdaryPfDtOluTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.6.2.1 | RowfjdaryPfDtOluEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.6.2.1.1 | ColumnfjdaryPfDtOluIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDtOlu entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.6.2.1.2 | ColumnfjdaryPfDtOluInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.7 | NodefjdaryPfDtDisk | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.7.1 | ScalarfjdaryPfDtDiskCount | read-only | mandatory | The number of DISK's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.7.2 | TablefjdaryPfDtDiskTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.7.2.1 | RowfjdaryPfDtDiskEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.7.2.1.1 | ColumnfjdaryPfDtDiskIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDtDisk entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.7.2.1.2 | ColumnfjdaryPfDtDiskInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.8 | NodefjdaryPfDtCm | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.8.1 | ScalarfjdaryPfDtCmCount | read-only | mandatory | The number of CM's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.8.2 | TablefjdaryPfDtCmTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.8.2.1 | RowfjdaryPfDtCmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.8.2.1.1 | ColumnfjdaryPfDtCmIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDtCm entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.8.2.1.2 | ColumnfjdaryPfDtCmInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.9 | NodefjdaryPfDtCaPort | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.9.1 | ScalarfjdaryPfDtCaPortCount | read-only | mandatory | The number of CA port's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.9.2 | TablefjdaryPfDtCaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.9.2.1 | RowfjdaryPfDtCaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.9.2.1.1 | ColumnfjdaryPfDtCaPortIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDtCaPort entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.9.2.1.2 | ColumnfjdaryPfDtCaPortInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.10 | NodefjdaryPfRaPort | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.10.1 | ScalarfjdaryPfRaPortCount | read-only | mandatory | The number of CA port's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2 | TablefjdaryPfRaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1 | RowfjdaryPfRaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.1 | ColumnfjdaryPfRaPortIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfRaPort entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.2 | ColumnfjdaryPfRaPortMode | read-only | mandatory | This shows a mode concerned CA. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.3 | ColumnfjdaryPfRaPortRdIOPS | read-only | mandatory | The Initiator IOPS is shown for RA,Initiator,CARA mode. This information is an invalid value for the CA mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.4 | ColumnfjdaryPfRaPortWtIOPS | read-only | mandatory | The Target IOPS is shown for the RA,CARA mode. This information is an invalid value for the Initiator,CA mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.5 | ColumnfjdaryPfRaPortRdTp | read-only | mandatory | The Initiator Throughput is shown for RA,Initiator,CARA mode. The unit is MB/sec. This information is an invalid value for the CA mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.6 | ColumnfjdaryPfRaPortWtTp | read-only | mandatory | The Target Throughput is shown for the RA,CARA mode. The unit is MB/sec. This information is an invalid value for the Initiator,CA mode. |
| 1.3.6.1.4.1.211.1.21.1.102.5.11 | NodefjdaryPfDtRaPort | |||
| 1.3.6.1.4.1.211.1.21.1.102.5.11.1 | ScalarfjdaryPfDtRaPortCount | read-only | mandatory | The number of CA port's performance informations (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.211.1.21.1.102.5.11.2 | TablefjdaryPfDtRaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.11.2.1 | RowfjdaryPfDtRaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.5.11.2.1.1 | ColumnfjdaryPfDtRaPortIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryPfDtRaPort entry. |
| 1.3.6.1.4.1.211.1.21.1.102.5.11.2.1.2 | ColumnfjdaryPfDtRaPortInfo | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.6 | ScalarfjdaryUnitStatus | read-only | mandatory | Overall status of this system. Status becomes warning or failed when there are broken parts in the system. But, it doesn't become warning or failed when mainta… |
| 1.3.6.1.4.1.211.1.21.1.102.7 | ScalarfjdaryTrapItemId | read-only | mandatory | This object is used to store the identification number of parts for which maintenance is necessary when trap is transmitted. |
| 1.3.6.1.4.1.211.1.21.1.102.8 | ScalarfjdaryTrapSensorInfo | read-only | mandatory | This object is used to store detail information of sensor when trap is transmitted. |
| 1.3.6.1.4.1.211.1.21.1.102.9 | ScalarfjdaryTrapMaintenanceInfo | read-only | mandatory | This object is used to store detail information of maintenance when trap is transmitted. |
| 1.3.6.1.4.1.211.1.21.1.102.10 | ScalarfjdaryTrapWarningInfo | read-only | mandatory | This object is used to store detail information of warning when trap is transmitted. |
| 1.3.6.1.4.1.211.1.21.1.102.11 | ScalarfjdaryTrapMessage | read-only | mandatory | This object is used to store detail messages when all trap is transmitted. |
| 1.3.6.1.4.1.211.1.21.1.102.12 | ScalarfjdaryMIBversion | read-only | mandatory | This is the version for this MIB. This defines a revision of v5.0 |
| 1.3.6.1.4.1.211.1.21.1.102.13 | NodefjdarySensor | |||
| 1.3.6.1.4.1.211.1.21.1.102.13.1 | NodefjdaryMachinePower | |||
| 1.3.6.1.4.1.211.1.21.1.102.13.1.1 | ScalarfjdaryMachinePowerCount | read-only | mandatory | The number of power consumption information table's entry on this machine. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2 | TablefjdaryMachinePowerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1 | RowfjdaryMachinePowerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.1 | ColumnfjdaryMachinePowerIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryMachinePower entry. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.2 | ColumnfjdaryMachinePowerFlag | read-only | mandatory | The state of information concerned index is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.3 | ColumnfjdaryMachinePowerCmNum | read-only | mandatory | CM number in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.4 | ColumnfjdaryMachinePowerTime | read-only | mandatory | Passage second when this information was gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.5 | ColumnfjdaryMachinePowerInfo0 | read-only | mandatory | The average power consumption is shown during one hour in the past. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.6 | ColumnfjdaryMachinePowerInfo1 | read-only | mandatory | The average power consumption 1 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.7 | ColumnfjdaryMachinePowerInfo2 | read-only | mandatory | The average power consumption 2 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.8 | ColumnfjdaryMachinePowerInfo3 | read-only | mandatory | The average power consumption 3 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.9 | ColumnfjdaryMachinePowerInfo4 | read-only | mandatory | The average power consumption 4 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.10 | ColumnfjdaryMachinePowerInfo5 | read-only | mandatory | The average power consumption 5 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.11 | ColumnfjdaryMachinePowerInfo6 | read-only | mandatory | The average power consumption 6 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.12 | ColumnfjdaryMachinePowerInfo7 | read-only | mandatory | The average power consumption 7 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.13 | ColumnfjdaryMachinePowerInfo8 | read-only | mandatory | The average power consumption 8 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.14 | ColumnfjdaryMachinePowerInfo9 | read-only | mandatory | The average power consumption 9 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.15 | ColumnfjdaryMachinePowerInfo10 | read-only | mandatory | The average power consumption 10 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.16 | ColumnfjdaryMachinePowerInfo11 | read-only | mandatory | The average power consumption 11 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.17 | ColumnfjdaryMachinePowerInfo12 | read-only | mandatory | The average power consumption 12 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.18 | ColumnfjdaryMachinePowerInfo13 | read-only | mandatory | The average power consumption 13 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.19 | ColumnfjdaryMachinePowerInfo14 | read-only | mandatory | The average power consumption 14 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.20 | ColumnfjdaryMachinePowerInfo15 | read-only | mandatory | The average power consumption 15 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.21 | ColumnfjdaryMachinePowerInfo16 | read-only | mandatory | The average power consumption 16 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.22 | ColumnfjdaryMachinePowerInfo17 | read-only | mandatory | The average power consumption 17 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.23 | ColumnfjdaryMachinePowerInfo18 | read-only | mandatory | The average power consumption 18 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.24 | ColumnfjdaryMachinePowerInfo19 | read-only | mandatory | The average power consumption 19 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.25 | ColumnfjdaryMachinePowerInfo20 | read-only | mandatory | The average power consumption 20 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.26 | ColumnfjdaryMachinePowerInfo21 | read-only | mandatory | The average power consumption 21 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.27 | ColumnfjdaryMachinePowerInfo22 | read-only | mandatory | The average power consumption 22 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.28 | ColumnfjdaryMachinePowerInfo23 | read-only | mandatory | The average power consumption 23 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.29 | ColumnfjdaryMachinePowerInfo24 | read-only | mandatory | The average power consumption 24 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2 | NodefjdaryEncPower | |||
| 1.3.6.1.4.1.211.1.21.1.102.13.2.1 | ScalarfjdaryEncPowerCount | read-only | mandatory | The number of power consumption information table's entry of each enclosure. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2 | TablefjdaryEncPowerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1 | RowfjdaryEncPowerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.1 | ColumnfjdaryEncPowerIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryEncPower entry. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.2 | ColumnfjdaryEncPowerFlag | read-only | mandatory | The state of information concerned index is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.3 | ColumnfjdaryEncPowerCmNum | read-only | mandatory | CM number in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.4 | ColumnfjdaryEncPowerDeId | read-only | mandatory | DE ID in which this information is gathered. When fjdaryEncPowerType is de, this information is effective. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.5 | ColumnfjdaryEncPowerTime | read-only | mandatory | Passage second when this information was gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.6 | ColumnfjdaryEncPowerType | read-only | mandatory | enclosure type in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.7 | ColumnfjdaryEncPowerInfo0 | read-only | mandatory | The average power consumption is shown during one hour in the past. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.8 | ColumnfjdaryEncPowerInfo1 | read-only | mandatory | The average power consumption 1 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.9 | ColumnfjdaryEncPowerInfo2 | read-only | mandatory | The average power consumption 2 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.10 | ColumnfjdaryEncPowerInfo3 | read-only | mandatory | The average power consumption 3 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.11 | ColumnfjdaryEncPowerInfo4 | read-only | mandatory | The average power consumption 4 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.12 | ColumnfjdaryEncPowerInfo5 | read-only | mandatory | The average power consumption 5 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.13 | ColumnfjdaryEncPowerInfo6 | read-only | mandatory | The average power consumption 6 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.14 | ColumnfjdaryEncPowerInfo7 | read-only | mandatory | The average power consumption 7 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.15 | ColumnfjdaryEncPowerInfo8 | read-only | mandatory | The average power consumption 8 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.16 | ColumnfjdaryEncPowerInfo9 | read-only | mandatory | The average power consumption 9 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.17 | ColumnfjdaryEncPowerInfo10 | read-only | mandatory | The average power consumption 10 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.18 | ColumnfjdaryEncPowerInfo11 | read-only | mandatory | The average power consumption 11 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.19 | ColumnfjdaryEncPowerInfo12 | read-only | mandatory | The average power consumption 12 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.20 | ColumnfjdaryEncPowerInfo13 | read-only | mandatory | The average power consumption 13 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.21 | ColumnfjdaryEncPowerInfo14 | read-only | mandatory | The average power consumption 14 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.22 | ColumnfjdaryEncPowerInfo15 | read-only | mandatory | The average power consumption 15 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.23 | ColumnfjdaryEncPowerInfo16 | read-only | mandatory | The average power consumption 16 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.24 | ColumnfjdaryEncPowerInfo17 | read-only | mandatory | The average power consumption 17 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.25 | ColumnfjdaryEncPowerInfo18 | read-only | mandatory | The average power consumption 18 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.26 | ColumnfjdaryEncPowerInfo19 | read-only | mandatory | The average power consumption 19 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.27 | ColumnfjdaryEncPowerInfo20 | read-only | mandatory | The average power consumption 20 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.28 | ColumnfjdaryEncPowerInfo21 | read-only | mandatory | The average power consumption 21 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.29 | ColumnfjdaryEncPowerInfo22 | read-only | mandatory | The average power consumption 22 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.30 | ColumnfjdaryEncPowerInfo23 | read-only | mandatory | The average power consumption 23 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.31 | ColumnfjdaryEncPowerInfo24 | read-only | mandatory | The average power consumption 24 hour ago is shown. The unit is Watt. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3 | NodefjdaryMachineTemp | |||
| 1.3.6.1.4.1.211.1.21.1.102.13.3.1 | ScalarfjdaryMachineTempCount | read-only | mandatory | The number of temperature information table's entry on this machine. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2 | TablefjdaryMachineTempTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1 | RowfjdaryMachineTempEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.1 | ColumnfjdaryMachineTempIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryMachineTemp entry. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.2 | ColumnfjdaryMachineTempFlag | read-only | mandatory | The state of information concerned index is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.3 | ColumnfjdaryMachineTempCmNum | read-only | mandatory | CM number in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.4 | ColumnfjdaryMachineTempTime | read-only | mandatory | Passage second when this information was gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.5 | ColumnfjdaryMachineTempInfo0 | read-only | mandatory | The maximum temperature is shown during one hour in the past. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.6 | ColumnfjdaryMachineTempInfo1 | read-only | mandatory | The maximum temperature 1 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.7 | ColumnfjdaryMachineTempInfo2 | read-only | mandatory | The maximum temperature 2 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.8 | ColumnfjdaryMachineTempInfo3 | read-only | mandatory | The maximum temperature 3 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.9 | ColumnfjdaryMachineTempInfo4 | read-only | mandatory | The maximum temperature 4 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.10 | ColumnfjdaryMachineTempInfo5 | read-only | mandatory | The maximum temperature 5 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.11 | ColumnfjdaryMachineTempInfo6 | read-only | mandatory | The maximum temperature 6 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.12 | ColumnfjdaryMachineTempInfo7 | read-only | mandatory | The maximum temperature 7 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.13 | ColumnfjdaryMachineTempInfo8 | read-only | mandatory | The maximum temperature 8 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.14 | ColumnfjdaryMachineTempInfo9 | read-only | mandatory | The maximum temperature 9 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.15 | ColumnfjdaryMachineTempInfo10 | read-only | mandatory | The maximum temperature 10 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.16 | ColumnfjdaryMachineTempInfo11 | read-only | mandatory | The maximum temperature 11 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.17 | ColumnfjdaryMachineTempInfo12 | read-only | mandatory | The maximum temperature 12 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.18 | ColumnfjdaryMachineTempInfo13 | read-only | mandatory | The maximum temperature 13 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.19 | ColumnfjdaryMachineTempInfo14 | read-only | mandatory | The maximum temperature 14 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.20 | ColumnfjdaryMachineTempInfo15 | read-only | mandatory | The maximum temperature 15 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.21 | ColumnfjdaryMachineTempInfo16 | read-only | mandatory | The maximum temperature 16 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.22 | ColumnfjdaryMachineTempInfo17 | read-only | mandatory | The maximum temperature 17 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.23 | ColumnfjdaryMachineTempInfo18 | read-only | mandatory | The maximum temperature 18 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.24 | ColumnfjdaryMachineTempInfo19 | read-only | mandatory | The maximum temperature 19 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.25 | ColumnfjdaryMachineTempInfo20 | read-only | mandatory | The maximum temperature 20 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.26 | ColumnfjdaryMachineTempInfo21 | read-only | mandatory | The maximum temperature 21 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.27 | ColumnfjdaryMachineTempInfo22 | read-only | mandatory | The maximum temperature 22 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.28 | ColumnfjdaryMachineTempInfo23 | read-only | mandatory | The maximum temperature 23 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.29 | ColumnfjdaryMachineTempInfo24 | read-only | mandatory | The maximum temperature 24 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4 | NodefjdaryEncTemp | |||
| 1.3.6.1.4.1.211.1.21.1.102.13.4.1 | ScalarfjdaryEncTempCount | read-only | mandatory | The number of temperature information table's entry of each enclosure. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2 | TablefjdaryEncTempTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1 | RowfjdaryEncTempEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.1 | ColumnfjdaryEncTempIndex | read-only | mandatory | The value of this object uniquely identifies this fjdaryEncTemp entry. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.2 | ColumnfjdaryEncTempFlag | read-only | mandatory | The state of information concerned index is shown. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.3 | ColumnfjdaryEncTempCmNum | read-only | mandatory | CM number in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.4 | ColumnfjdaryEncTempDeId | read-only | mandatory | DE ID in which this information is gathered. When fjdaryEncTempType is de, this information is effective |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.5 | ColumnfjdaryEncTempTime | read-only | mandatory | Passage second when this information was gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.6 | ColumnfjdaryEncTempType | read-only | mandatory | enclosure type in which this information is gathered. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.7 | ColumnfjdaryEncTempInfo0 | read-only | mandatory | The maximum temperature is shown during one hour in the past. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.8 | ColumnfjdaryEncTempInfo1 | read-only | mandatory | The maximum temperature 1 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.9 | ColumnfjdaryEncTempInfo2 | read-only | mandatory | The maximum temperature 2 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.10 | ColumnfjdaryEncTempInfo3 | read-only | mandatory | The maximum temperature 3 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.11 | ColumnfjdaryEncTempInfo4 | read-only | mandatory | The maximum temperature 4 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.12 | ColumnfjdaryEncTempInfo5 | read-only | mandatory | The maximum temperature 5 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.13 | ColumnfjdaryEncTempInfo6 | read-only | mandatory | The maximum temperature 6 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.14 | ColumnfjdaryEncTempInfo7 | read-only | mandatory | The maximum temperature 7 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.15 | ColumnfjdaryEncTempInfo8 | read-only | mandatory | The maximum temperature 8 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.16 | ColumnfjdaryEncTempInfo9 | read-only | mandatory | The maximum temperature 9 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.17 | ColumnfjdaryEncTempInfo10 | read-only | mandatory | The maximum temperature 10 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.18 | ColumnfjdaryEncTempInfo11 | read-only | mandatory | The maximum temperature 11 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.19 | ColumnfjdaryEncTempInfo12 | read-only | mandatory | The maximum temperature 12 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.20 | ColumnfjdaryEncTempInfo13 | read-only | mandatory | The maximum temperature 13 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.21 | ColumnfjdaryEncTempInfo14 | read-only | mandatory | The maximum temperature 14 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.22 | ColumnfjdaryEncTempInfo15 | read-only | mandatory | The maximum temperature 15 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.23 | ColumnfjdaryEncTempInfo16 | read-only | mandatory | The maximum temperature 16 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.24 | ColumnfjdaryEncTempInfo17 | read-only | mandatory | The maximum temperature 17 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.25 | ColumnfjdaryEncTempInfo18 | read-only | mandatory | The maximum temperature 18 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.26 | ColumnfjdaryEncTempInfo19 | read-only | mandatory | The maximum temperature 19 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.27 | ColumnfjdaryEncTempInfo20 | read-only | mandatory | The maximum temperature 20 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.28 | ColumnfjdaryEncTempInfo21 | read-only | mandatory | The maximum temperature 21 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.29 | ColumnfjdaryEncTempInfo22 | read-only | mandatory | The maximum temperature 22 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.30 | ColumnfjdaryEncTempInfo23 | read-only | mandatory | The maximum temperature 23 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.31 | ColumnfjdaryEncTempInfo24 | read-only | mandatory | The maximum temperature 24 hour ago is shown. The unit is Celsius. |
| 1.3.6.1.4.1.211.1.21.1.102.14 | NodefjdaryManagement | |||
| 1.3.6.1.4.1.211.1.21.1.102.14.1 | NodefjdaryMgtMachineInfo | |||
| 1.3.6.1.4.1.211.1.21.1.102.14.1.1 | ScalarfjdaryMgtMachineStatus | read-only | mandatory | Overall status of this system. Status becomes warning or failed when there are broken parts in the system. But, it doesn't become warning or failed when mainta… |
| 1.3.6.1.4.1.211.1.21.1.102.14.1.2 | ScalarfjdaryMgtMachineSubStatus | read-only | mandatory | Overall status of this system. Status becomes warning or failed when there are broken parts in the system. It becomes warning and failed while even maintaining… |
| 1.3.6.1.4.1.211.1.21.1.102.14.1.3 | ScalarfjdaryMgtMaintenanceMode | read-only | mandatory | This shows the state of the mode while maintaining the system. (In the maintenance work, fjdaryMgtMaintenanceMode is on) |
| 1.3.6.1.4.1.211.1.21.1.102.14.1.4 | ScalarfjdaryMgtConfigInfo | read-only | mandatory | This shows the management data of the configuration information of machine. This data is the one only for a certain specific software. |
| 1.3.6.1.4.1.211.1.21.1.102.14.1.5 | ScalarfjdaryMgtConfigSubInfo | read-only | mandatory | This is a detail of fjdaryMgtConfigInfo. This data is the one only for a certain specific software. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2 | NodefjdaryMgtOpVolume | |||
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2 | TablefjdaryMgtOpVolumeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1 | RowfjdaryMgtOpVolumeEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.1 | ColumnfjdaryMgtOpVolumeNumber | read-only | mandatory | This shows the open volume number. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.2 | ColumnfjdaryMgtOpVolumeStatus | read-only | mandatory | This shows the status of open volume. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.3 | ColumnfjdaryMgtOpVolumeType | read-only | mandatory | This shows the type of open volume. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.4 | ColumnfjdaryMgtOpVolumeCapacity | read-only | mandatory | This shows the open volume capacity. The unit is MB. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.5 | ColumnfjdaryMgtOpVolumeType2 | read-only | mandatory | This shows the type of open volume. This is more detailed than fjdaryMgtOpVolumeType. |
| 1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.6 | ColumnfjdaryMgtOpVolumeAttribute | read-only | mandatory | This shows the attribute of open volume. The value is a bit mask. The bits have the following definition: Dynamic LUN Mirroring(DLM) - 4 Offloaded Data Transfe… |
| 1.3.6.1.4.1.211.1.21.1.102.14.3 | NodefjdaryMgtRaidGrp | |||
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2 | TablefjdaryMgtRaidGrpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2.1 | RowfjdaryMgtRaidGrpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.1 | ColumnfjdaryMgtRaidGrpNumber | read-only | mandatory | This shows the raid group number. |
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.2 | ColumnfjdaryMgtRaidGrpStatus | read-only | mandatory | This shows the status of raid group |
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.3 | ColumnfjdaryMgtRaidGrpRaidLevel | read-only | mandatory | This shows the RAID level. the following definition: RAID0 - raid0 RAID1 - raid1 RAID1+0 - raid10 RAID5 - raid5 RAID5+0 - raid50 RAID6 - raid6 |
| 1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.4 | ColumnfjdaryMgtRaidGrpCapacity | read-only | mandatory | This shows the raid group capacity. The unit is MB. |
| 1.3.6.1.4.1.211.1.21.1.102.15 | ScalarfjdaryTrapLinkStatusInfo | read-only | mandatory | This object is used to store detail information of CA port link status when trap is transmitted. |
| 1.3.6.1.4.1.211.4 | Nodeapplication | |||
| 1.3.6.1.4.1.211.4.1 | NodeaplNetwork | |||
| 1.3.6.1.4.1.211.4.1.1 | NodeaplNetDevice | |||
| 1.3.6.1.4.1.211.4.1.1.126 | NodeaplNetStorage | |||
| 1.3.6.1.4.1.211.4.1.1.126.1 | NodeaplNetNsp | |||
| 1.3.6.1.4.1.211.4.1.1.126.1.102 | NodeaplNetFjdarye102 | |||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.0 | Nodefjdarye102ConfigChange | A configChange trap signifies that the sending protocol entity recognizes the change in configuration information. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.1 | Nodefjdarye102FirmChange | A firmChange trap signifies that the exchange of the firmware was executed. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.2 | Nodefjdarye102ItemFault | A itemFault trap signifies that device was failed. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.3 | Nodefjdarye102BatteryExpiration | A batteryExpiration trap signifies that the exchange time of the battery comes. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.4 | Nodefjdarye102RebuildNotStart | A rebuildNotStart trap signifies that not to be able to begin to execute the rebuild because there is no spare disk. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.5 | Nodefjdarye102ItemWarning | A itemWarning trap signifies that device was warning. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.6 | Nodefjdarye102SensorStatusChange | A sensorStatusChange trap signifies that environment sensor status changes. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.7 | Nodefjdarye102MaintenanceRequired | A maintenanceRequired trap signifies that maintenance information. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.9 | Nodefjdarye102Information | A Information trap signifies that information events. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.10 | Nodefjdarye102CaPortLinkStatusChange | A caPortLinkStatusChange trap signifies that CA port link status changes. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.22 | Nodefjdarye102ItemFaultToNormal | A itemFaultToNormal trap signifies that the device state has changed to normal after sending itemFault trap. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.25 | Nodefjdarye102ItemWarningToNormal | A itemWarningToNormal trap signifies that the device state has changed to normal after sending itemWarning trap. | ||
| 1.3.6.1.4.1.211.4.1.1.126.1.102.26 | Nodefjdarye102SensorStatusChangeToNormal | A sensorStatusChangeToNormal trap signifies that the error or warning state detected by the environment sensor has returned to normal after sending SensorStatu… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FjdaryComponentStatus | INTEGER{ normal(1), alarm(2), warning(3), invalid(4), maintenance(5), undefined(6) } |