FLARION-USERINFO-MIB
53 objects
No module-level DESCRIPTION found.
Imported Objects
| FLARION-MIB | flarion FloatAsString |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8603.4 | NoderrUserInfo | |||
| 1.3.6.1.4.1.8603.4.1 | NodeusrSiteInfo | |||
| 1.3.6.1.4.1.8603.4.1.1 | NodesiteIdentity | |||
| 1.3.6.1.4.1.8603.4.1.1.1 | ScalarsiteId | read-write | current | The name given to the basestation by the wireless carrier. The siteId is controlled by the carrier. |
| 1.3.6.1.4.1.8603.4.1.1.2 | ScalarsiteName | read-write | current | The site name as chosen by the carrier. The name may be derived from the siteId or from the siteCity. |
| 1.3.6.1.4.1.8603.4.1.1.3 | ScalarsiteOwner | read-write | current | The owner of the basestation. |
| 1.3.6.1.4.1.8603.4.1.1.4 | ScalarsiteInstallDate | read-write | current | Date of installation of the basestation. |
| 1.3.6.1.4.1.8603.4.1.1.5 | ScalarsiteCommissionDate | read-write | current | Date of completing commissioning of the basestation. |
| 1.3.6.1.4.1.8603.4.1.1.6 | ScalarsiteOtherInfo | read-write | current | This field is reserved to store any information that the carrier chooses to use. |
| 1.3.6.1.4.1.8603.4.1.2 | NodesiteLocation | |||
| 1.3.6.1.4.1.8603.4.1.2.1 | ScalarsiteStreet | read-write | current | Street address. |
| 1.3.6.1.4.1.8603.4.1.2.2 | ScalarsiteCity | read-write | current | City name. |
| 1.3.6.1.4.1.8603.4.1.2.3 | ScalarsiteCounty | read-write | current | County (if applicable). |
| 1.3.6.1.4.1.8603.4.1.2.4 | ScalarsiteState | read-write | current | State (if applicable). |
| 1.3.6.1.4.1.8603.4.1.2.5 | ScalarsitePostalLocation | read-write | current | Zip code or postal code (if applicable). |
| 1.3.6.1.4.1.8603.4.1.2.6 | ScalarsiteCountry | read-write | current | Country. |
| 1.3.6.1.4.1.8603.4.1.2.7 | ScalarsiteLatitude | read-write | current | The site angular distance north or south of the earth's equator, measured in degrees along a meridian. |
| 1.3.6.1.4.1.8603.4.1.2.8 | ScalarsiteLongitude | read-write | current | The site angular distance on the earth's surface, measured east or west and expressed in degrees. |
| 1.3.6.1.4.1.8603.4.1.2.9 | ScalarsiteGroundElevation | read-write | current | The ground elevation of the site, in feet. |
| 1.3.6.1.4.1.8603.4.1.3 | NodesiteRfEnv | |||
| 1.3.6.1.4.1.8603.4.1.3.1 | ScalarsiteStructureType | read-write | current | The method by which the antenna is mounted in the field. Possible options include monopole, flagpole, self support, water tank, etc. |
| 1.3.6.1.4.1.8603.4.1.3.2 | ScalarsiteAntennaConfig | read-write | current | Used to indicate if the basestation antennae are configured as: Sectorized - radiates RF energy in 1,2, or 3 sectors Omni - radiates RF power in all directions… |
| 1.3.6.1.4.1.8603.4.1.3.3 | ScalarsiteNumSectors | read-write | current | This parameter is used to indicate the number of sectors in the base station. Options are: 0 = omni 1 = one sector 2 = two sectors 3 = three sectors |
| 1.3.6.1.4.1.8603.4.1.4 | NodesiteConnectivity | |||
| 1.3.6.1.4.1.8603.4.1.4.1 | ScalarsiteCluster | read-write | current | For EMS management purposes, the network may be divided into clusters. This field identifies the cluster associated with the basestation. |
| 1.3.6.1.4.1.8603.4.1.4.2 | ScalarsiteDomain | read-write | current | The site domain is used with the siteId to form the hostname of the basestation. |
| 1.3.6.1.4.1.8603.4.2 | NodeusrSectorInfo | |||
| 1.3.6.1.4.1.8603.4.2.1 | TablesectorAntennaTable | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.1.1 | RowsectorAntennaEntry | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.1.1.1 | ColumnsecAntIndex | read-only | current | Sector index. |
| 1.3.6.1.4.1.8603.4.2.1.1.2 | ColumnsecAntName | read-write | current | Sector name. For example, alpha, beta, gamme, omni. |
| 1.3.6.1.4.1.8603.4.2.1.1.3 | ColumnsecAntMorphology | read-write | current | An indication of the RF classification for the coverage area of the sector. Possible values include Rural, Dense Rural, Light Suburban, Suburban, Dense Suburba… |
| 1.3.6.1.4.1.8603.4.2.1.1.4 | ColumnsecAntManufacturer | read-write | current | Name of the manufacturer of the antenna used in this sector. |
| 1.3.6.1.4.1.8603.4.2.1.1.5 | ColumnsecAntSharing | read-write | current | Used to indicate and explain if the antenna is shared with other basestations or other technologies. |
| 1.3.6.1.4.1.8603.4.2.1.1.6 | ColumnsecAntRxDiv | read-write | current | Indicates if two antennae are used in order to obtain diversity. |
| 1.3.6.1.4.1.8603.4.2.1.1.7 | ColumnsecAntSpatialDiv | read-write | current | Indicates if antenna spatial diversity (two antennas physically separated) is used. |
| 1.3.6.1.4.1.8603.4.2.1.1.8 | ColumnsecAntPolarDiv | read-write | current | Indicates if antenna polarization diversity is used. |
| 1.3.6.1.4.1.8603.4.2.1.1.9 | ColumnsecAntModel | read-write | current | The model number of the antenna. |
| 1.3.6.1.4.1.8603.4.2.2 | TablesectorAntennaCharTable | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.2.1 | RowsectorAntennaCharEntry | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.2.1.1 | ColumnsecAntCharIndex | read-only | current | Sector index. |
| 1.3.6.1.4.1.8603.4.2.2.1.2 | ColumnsecAntCharGain | read-write | current | The antenna gain in dBd (a measure of how well the antenna will send or pick up a radio signal compared to a dipole antenna). Valid values are 0 to 100. |
| 1.3.6.1.4.1.8603.4.2.2.1.3 | ColumnsecAntCharHorizontalBw | read-write | current | An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the horizontal plane. This value is used al… |
| 1.3.6.1.4.1.8603.4.2.2.1.4 | ColumnsecAntCharVertcalBw | read-write | current | An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the vertical plane. This value is used alon… |
| 1.3.6.1.4.1.8603.4.2.2.1.5 | ColumnsecAntCharRadOnCenter | read-write | current | This is a measurement of the antenna center line mounting height, in feet Above Ground Level (AGL). |
| 1.3.6.1.4.1.8603.4.2.2.1.6 | ColumnsecAntCharAzimuth | read-write | current | This is a measure of the antenna main-beam orientation with respect to true north in the horizontal plane. |
| 1.3.6.1.4.1.8603.4.2.2.1.7 | ColumnsecAntCharMechanicalTilt | read-write | current | This is a measure of the physical mounting of the antenna with respect to plumb (vertical). This value indicates values relative to plumb which is assumed to b… |
| 1.3.6.1.4.1.8603.4.2.2.1.8 | ColumnsecAntCharElectricalTilt | read-write | current | A measure of the down-tilt designed into the antenna pattern. This is typically measured relative to a point at 90 degrees to a plumb back plane in the main be… |
| 1.3.6.1.4.1.8603.4.2.3 | TablesectorLnaTable | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.3.1 | RowsectorLnaEntry | not-accessible | current | |
| 1.3.6.1.4.1.8603.4.2.3.1.1 | ColumnsecLnaIndex | read-only | current | Sector index. |
| 1.3.6.1.4.1.8603.4.2.3.1.2 | ColumnsecLnaFilterType | read-write | current | This parameter indicated the type of filter used in the LNA/Duplexer unit. It can be simplex (receive only, or duplex for transmit and receive). |
| 1.3.6.1.4.1.8603.4.2.3.1.3 | ColumnsecLnaTowerTop | read-write | current | Indicates if the LNA is a tower-top mounted type. |