FN10-MIB
301 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3 | Nodecmu | |||
| 1.3.6.1.4.1.3.1 | Nodesystems | |||
| 1.3.6.1.4.1.3.1.1 | NodecmuSNMP | |||
| 1.3.6.1.4.1.3.1.2 | NodecmuKip | |||
| 1.3.6.1.4.1.3.1.3 | NodecmuRouter | |||
| 1.3.6.1.4.1.3.2 | Nodemibs | |||
| 1.3.6.1.4.1.97 | Nodesigma | |||
| 1.3.6.1.4.1.97.1 | NodesxTempOKTrap | Sent whenever the module's temperature transitions from too hot to okay, and vice versa. | ||
| 1.3.6.1.4.1.97.1 | Nodesys | |||
| 1.3.6.1.4.1.97.1.1 | ScalarsysID | read-only | mandatory | |
| 1.3.6.1.4.1.97.1.2 | ScalarsysReset | read-write | mandatory | |
| 1.3.6.1.4.1.97.1.3 | ScalarsysTrapAck | read-only | mandatory | |
| 1.3.6.1.4.1.97.1.4 | ScalarsysTrapTime | read-only | mandatory | |
| 1.3.6.1.4.1.97.1.5 | ScalarsysTrapRetry | read-only | mandatory | |
| 1.3.6.1.4.1.97.1.6 | ScalarsysTrapPort | read-write | mandatory | |
| 1.3.6.1.4.1.97.2 | Nodees-1xe | |||
| 1.3.6.1.4.1.97.2 | NodesxWriteStatusTrap | Sent when a bank of Flash EPROM has been erased. If sxswdisWriteStatus indicates success, then the unit is ready to be downloaded with the new software. | ||
| 1.3.6.1.4.1.97.2.1 | Nodesxhw | |||
| 1.3.6.1.4.1.97.2.1.1 | ScalarsxhwDiagCode | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.2 | ScalarsxhwManufData | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.3 | ScalarsxhwPortCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.4 | TablesxhwPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1 | RowsxhwPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1.1 | ColumnsxhwPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1.2 | ColumnsxhwPortType | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1.3 | ColumnsxhwPortSubType | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1.4 | ColumnsxhwPortDiagPassed | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.4.1.5 | ColumnsxhwAddr | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.1.5 | ScalarsxhwUpLink | read-only | mandatory | Specifies whether the Up-Link I/O module is existed |
| 1.3.6.1.4.1.97.2.1.6 | ScalarsxhwUpLinkManufData | read-only | mandatory | This is a 32-byte array which contains the part number, serial number, and hardware revision level of the Up-Link I/O module. This array is valid only when the… |
| 1.3.6.1.4.1.97.2.2 | Nodesxsw | |||
| 1.3.6.1.4.1.97.2.2.1 | ScalarsxswNumber | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2 | TablesxswFilesetTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1 | RowsxswFileset | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.1 | ColumnsxswIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.2 | ColumnsxswDesc | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.3 | ColumnsxswCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.4 | ColumnsxswType | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.5 | ColumnsxswSizes | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.6 | ColumnsxswStarts | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.7 | ColumnsxswBases | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.2.2.1.8 | ColumnsxswFlashBank | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3 | Nodesxadmin | |||
| 1.3.6.1.4.1.97.2.3.1 | ScalarsxadminFatalErr | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.2 | ScalarsxadminAnyPass | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.3 | ScalarsxadminGetPass | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.4 | ScalarsxadminNMSIPAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.5 | ScalarsxadminAlarmDynamic | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.6 | ScalarsxadminAlarmAddressChange | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.7 | ScalarsxadminStorageFailure | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.8 | ScalarsxadminAuthenticationFailure | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.9 | ScalarsxadminStatsExtended | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.10 | ScalarsxadminNAMReceiveCongests | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.11 | ScalarsxadminArpEntries | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.12 | ScalarsxadminArpStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.13 | ScalarsxadminArpOverflows | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.14 | ScalarsxadminIpEntries | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.15 | ScalarsxadminIpStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.16 | ScalarsxadminStaticPreference | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.17 | ScalarsxadminRipPreference | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.18 | ScalarsxadminRipRouteDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.19 | ScalarsxadminRebootConfig | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.20 | ScalarsxadminTempOK | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.21 | ScalarsxadminDisableButton | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.22 | ScalarsxadminButtonSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.23 | ScalarsxadminLEDProgramOption | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.24 | ScalarsxadminNAMTxBufferCount | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.25 | ScalarsxadminNAMRxBufferSize | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.3.26 | ScalarsxadminCpuUtilization | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.3.27 | ScalarsxadminExtraTrunkGrouping | read-write | mandatory | If true(1), then as many as 8 trunk groups may be created, rather than the default limit of 4 trunk groups. When true(1), fewer links will be allowed in each t… |
| 1.3.6.1.4.1.97.2.4 | Nodesxswdis | |||
| 1.3.6.1.4.1.97.2.4.1 | ScalarsxswdisDesc | read-only | mandatory | The description (0-32 bytes) of the software set currently being downloaded, or a description of the software set last downloaded since the last boot. |
| 1.3.6.1.4.1.97.2.4.2 | ScalarsxswdisAccess | read-write | mandatory | The version of software that may be downloaded. Attempts to download other versions of software will be rejected. The value for swdisAccess is embedded within … |
| 1.3.6.1.4.1.97.2.4.3 | ScalarsxswdisWriteStatus | read-only | mandatory | The status of the erase/write operation. |
| 1.3.6.1.4.1.97.2.4.4 | ScalarsxswdisConfigIp | read-write | mandatory | The IP address of the NMS (i.e., any IP host) that is allowed to use TFTP to send/retrieve the configuration file of the device. A value of 0.0.0.0 (which is t… |
| 1.3.6.1.4.1.97.2.4.5 | ScalarsxswdisConfigRetryTime | read-write | mandatory | The number of seconds that the device will wait for an acknowledgment before it retransmits an unacknowledged TFTP data block. The factory specified default is… |
| 1.3.6.1.4.1.97.2.4.6 | ScalarsxswdisConfigTotalTimeout | read-write | mandatory | The number of seconds that the device will wait for an acknowledgment to a data block before it cancels a TFTP session. The factory specified default is 25 sec… |
| 1.3.6.1.4.1.97.2.5 | Nodesxaddr | |||
| 1.3.6.1.4.1.97.2.5.1 | ScalarsxaddrStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.5.2 | ScalarsxaddrDynamics | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.5.3 | ScalarsxaddrDynamicMax | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.4 | ScalarsxaddrDynamicOverflows | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.5.5 | ScalarsxaddrFlags | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.6 | ScalarsxaddrMAC | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.7 | ScalarsxaddrPort | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.8 | ScalarsxaddrOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.9 | ScalarsxaddrIndex | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.10 | ScalarsxaddrNext | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.11 | ScalarsxaddrAge | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.12 | ScalarsxaddrDestAge | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.13 | ScalarsxaddrRxPkts | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.14 | ScalarsxaddrRxChars | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.15 | ScalarsxaddrRxMultiPkts | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.16 | ScalarsxaddrRxFwdPkts | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.17 | ScalarsxaddrTxPkts | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.18 | ScalarsxaddrTxChars | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.19 | ScalarsxaddrBlockSize | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.20 | ScalarsxaddrBlock | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.5.21 | ScalarsxaddrAlarmMAC | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6 | Nodesxif | |||
| 1.3.6.1.4.1.97.2.6.1 | TablesxifTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1 | RowsxifEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.1 | ColumnsxifIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.2 | ColumnsxifRxCnt | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.3 | ColumnsxifTxCnt | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.4 | ColumnsxifThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.5 | ColumnsxifThresholdTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.6 | ColumnsxifRxQueueThresh | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.7 | ColumnsxifRxQueueThreshTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.8 | ColumnsxifTxStormCnt | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.9 | ColumnsxifTxStormTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.10 | ColumnsxifFilterFloodSourceSame | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.11 | ColumnsxifFilterAllSourceLearned | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.12 | ColumnsxifFilterNoLearning | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.13 | ColumnsxifFilterAllDestLearned | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.14 | ColumnsxifCongestTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.15 | ColumnsxifQueueTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.16 | ColumnsxifFunction | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.17 | ColumnsxifRxPacket | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.18 | ColumnsxifRxHwFCSs | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.19 | ColumnsxifRxQueues | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.20 | ColumnsxifTxPacket | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.21 | ColumnsxifTxStorms | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.22 | ColumnsxifTxDests | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.23 | ColumnsxifLan1 | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.24 | ColumnsxifLan2 | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.25 | ColumnsxifLan3 | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.26 | ColumnsxifLan4 | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.27 | ColumnsxifStatisticsTime | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.28 | ColumnsxifIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.29 | ColumnsxifIpGroupAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.30 | ColumnsxifForwardedChars | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.31 | ColumnsxifFilteredChars | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.6.1.1.32 | ColumnsxifDescr | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.7 | Nodesxdot3 | |||
| 1.3.6.1.4.1.97.2.7.1 | Tablesxdot3Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1 | Rowsxdot3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.1 | Columnsxdot3Index | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.2 | Columnsxdot3TPLinkOK | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.3 | Columnsxdot3LedOn | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.4 | Columnsxdot3RxCollisions | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.5 | Columnsxdot3RxRunts | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.6 | Columnsxdot3RxLateColls | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.7 | Columnsxdot3TxJabbers | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.8 | Columnsxdot3TxBabbles | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.9 | Columnsxdot3TxCollisions | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.10 | Columnsxdot3RxErrInfo | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.11 | Columnsxdot3TxErrInfo | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.12 | Columnsxdot3FuseOkay | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.7.1.1.13 | Columnsxdot3SpeedSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.8 | Nodesxuart | |||
| 1.3.6.1.4.1.97.2.8.1 | TablesxuartTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.8.1.1 | RowsxuartEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.8.1.1.1 | ColumnsxuartIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.8.1.1.2 | ColumnsxuartBaud | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.8.1.1.3 | ColumnsxuartAlignmentErrors | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.8.1.1.4 | ColumnsxuartOverrunErrors | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9 | Nodesxfilter | |||
| 1.3.6.1.4.1.97.2.9.1 | ScalarsxfilterMaxCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.2 | ScalarsxfilterCurrentCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.3 | ScalarsxfilterDeleteID | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.4 | ScalarsxfilterNextID | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.5 | ScalarsxfilterAddID | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.6 | ScalarsxfilterAddIndex | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7 | TablesxfilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1 | RowsxfilterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.1 | ColumnsxfilterIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.2 | ColumnsxfilterID | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.3 | ColumnsxfilterPortNo | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.4 | ColumnsxfilterComboType | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.5 | ColumnsxfilterFlags | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.6 | ColumnsxfilterFrame | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.7 | ColumnsxfilterSource | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.8 | ColumnsxfilterSourceEnd | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.9 | ColumnsxfilterDest | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.10 | ColumnsxfilterDestEnd | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.11 | ColumnsxfilterSourceMask | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.12 | ColumnsxfilterDestMask | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.13 | ColumnsxfilterSrcLan | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.14 | ColumnsxfilterOffset | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.15 | ColumnsxfilterField | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.16 | ColumnsxfilterMask | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.17 | ColumnsxfilterThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.18 | ColumnsxfilterThreshTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.19 | ColumnsxfilterThreshFlag | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.20 | ColumnsxfilterPktCnts | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.21 | ColumnsxfilterLastSrc | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.9.7.1.22 | ColumnsxfilterByteCnts | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.10 | Nodesxdebug | |||
| 1.3.6.1.4.1.97.2.10.1 | ScalarsxdebugStringID | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.10.2 | ScalarsxdebugString | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.10.3 | TablesxdebugTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1 | RowsxdebugEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1.1 | ColumnsxdebugIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1.2 | ColumnsxdebugOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1.3 | ColumnsxdebugBase | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1.4 | ColumnsxdebugLength | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.10.3.1.5 | ColumnsxdebugData | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11 | Nodesxlpbk | |||
| 1.3.6.1.4.1.97.2.11.1 | TablesxlpbkTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1 | RowsxlpbkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.1 | ColumnsxlpbkIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.2 | ColumnsxlpbkOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.3 | ColumnsxlpbkDestAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.4 | ColumnsxlpbkPktNum | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.5 | ColumnsxlpbkInterval | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.6 | ColumnsxlpbkPktLength | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.7 | ColumnsxlpbkIncrements | read-write | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.8 | ColumnsxlpbkGoods | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.9 | ColumnsxlpbkErrorNoReceives | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.10 | ColumnsxlpbkErrorBadReceives | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.11 | ColumnsxlpbkErrorSize | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.12 | ColumnsxlpbkErrorSent | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.13 | ColumnsxlpbkErrorReceived | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.11.1.1.14 | ColumnsxlpbkErrorOffset | read-only | mandatory | |
| 1.3.6.1.4.1.97.2.12 | Nodesxproto | |||
| 1.3.6.1.4.1.97.2.12.1 | TablesxprotoTable | not-accessible | mandatory | This table contains configuration information specify- ing the types of protocols used to bridge, route, translate, and filter frames for each port. |
| 1.3.6.1.4.1.97.2.12.1.1 | RowsxprotoEntry | not-accessible | mandatory | Each entry in this table specifies which protocols are used by a particular port in the ES/1. |
| 1.3.6.1.4.1.97.2.12.1.1.1 | ColumnsxprotoIfIndex | read-only | mandatory | Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port… |
| 1.3.6.1.4.1.97.2.12.1.1.2 | ColumnsxprotoBridge | read-write | mandatory | Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or… |
| 1.3.6.1.4.1.97.2.12.1.1.3 | ColumnsxprotoSuppressBpdu | read-write | mandatory | Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-routing spanning tree packets are… |
| 1.3.6.1.4.1.97.2.12.1.1.4 | ColumnsxprotoRipListen | read-write | mandatory | Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit. |
| 1.3.6.1.4.1.97.2.12.1.1.5 | ColumnsxprotoTrunking | read-write | mandatory | Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port. |
| 1.3.6.1.4.1.97.2.12.1.1.6 | ColumnsxsprotoCollisionRelief | read-write | mandatory | Specifies whether the 10 Mbits Ethernet modified back-off algorithm is to be used. This option forces Ethernet port to stop the back-off timer when a transmit … |
| 1.3.6.1.4.1.97.2.13 | Nodesxtrunk | |||
| 1.3.6.1.4.1.97.2.13.1 | TablesxtrunkTable | not-accessible | mandatory | This table describes the trunking status and attributes of the interfaces that are configured for bridge trunking. |
| 1.3.6.1.4.1.97.2.13.1.1 | RowsxtrunkEntry | not-accessible | mandatory | An entry exists in this table for each physical interface (port) that is configured for trunking. |
| 1.3.6.1.4.1.97.2.13.1.1.1 | ColumnsxtrunkIfIndex | read-only | mandatory | Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other po… |
| 1.3.6.1.4.1.97.2.13.1.1.2 | ColumnsxtrunkState | read-only | mandatory | If off(1) then this link has not been enabled for trunking. If closed(2) then this link has not yet received any Trunking PDUs. If oneway(3) then incoming Trun… |
| 1.3.6.1.4.1.97.2.13.1.1.3 | ColumnsxtrunkRemoteBridgeAddr | read-only | mandatory | The MAC address portion of the bridge ID of the remote bridge. |
| 1.3.6.1.4.1.97.2.13.1.1.4 | ColumnsxtrunkRemoteIp | read-only | mandatory | The IP address of the remote bridge, as reported by that bridge for administrative purposes. |
| 1.3.6.1.4.1.97.2.13.1.1.5 | ColumnsxtrunkLastError | read-only | mandatory | The last reason for failure when the link is in closed, oneway, or helddown state. |
| 1.3.6.1.4.1.97.2.13.1.1.6 | ColumnsxtrunkLinkOrdinal | read-only | mandatory | The position of this link within the trunk group. |
| 1.3.6.1.4.1.97.2.13.1.1.7 | ColumnsxtrunkLinkCount | read-only | mandatory | The number of links within the trunk group. |
| 1.3.6.1.4.1.97.2.13.1.1.8 | ColumnsxtrunkLastChange | read-only | mandatory | The number of seconds since sxtrunkState changed. |
| 1.3.6.1.4.1.97.2.14 | Nodesxworkgroup | |||
| 1.3.6.1.4.1.97.2.14.1 | ScalarsxWorkGroupNextNumber | read-only | mandatory | The next available workgroup number to be used. When creating a new workgroup, it is recommended to read the value of the variable and use it to key into the w… |
| 1.3.6.1.4.1.97.2.14.2 | ScalarsxWorkGroupCurrentCount | read-only | mandatory | The total number of workgroups currently defined. |
| 1.3.6.1.4.1.97.2.14.3 | ScalarsxWorkGroupMaxCount | read-only | mandatory | The maximum number of workgroups allowed. |
| 1.3.6.1.4.1.97.2.14.4 | TablesxWorkGroupTable | not-accessible | mandatory | This table contains work group definitions for the interfaces. |
| 1.3.6.1.4.1.97.2.14.4.1 | RowsxWorkGroupEntry | not-accessible | mandatory | Each entry in this table contains a definition of a work group. |
| 1.3.6.1.4.1.97.2.14.4.1.1 | ColumnsxWorkGroupNumber | read-write | mandatory | An integer that identifies the work group, used as an index to this table. |
| 1.3.6.1.4.1.97.2.14.4.1.2 | ColumnsxWorkGroupName | read-write | mandatory | A 1-16 character work group name. |
| 1.3.6.1.4.1.97.2.14.4.1.3 | ColumnsxWorkGroupPorts | read-write | mandatory | A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc. |
| 1.3.6.1.4.1.97.2.14.4.1.4 | ColumnsxWorkGroupType | read-write | mandatory | The type of work group: all - no additional information needs to be supplied. ip - the IP network (and optionally, IP mask) must be supplied. ipx - the IPX net… |
| 1.3.6.1.4.1.97.2.14.4.1.5 | ColumnsxWorkGroupIpAddress | read-write | mandatory | The IP network address. |
| 1.3.6.1.4.1.97.2.14.4.1.6 | ColumnsxWorkGroupIpMask | read-write | mandatory | The IP network mask, if set to 0, the default network mask is applied. |
| 1.3.6.1.4.1.97.2.14.4.1.7 | ColumnsxWorkGroupIpxNetwork | read-write | mandatory | The IPX network number, 0 means all networks. |
| 1.3.6.1.4.1.97.2.15 | NodesxtrapMgt | |||
| 1.3.6.1.4.1.97.2.15.1 | TablesxtrapControlTable | not-accessible | mandatory | This table contains information about the severity of each trap and whether the trap is currently enable. |
| 1.3.6.1.4.1.97.2.15.1.1 | RowsxtrapControl | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.15.1.1.1 | ColumnsxtrapIndex | read-only | mandatory | The specific trap number. |
| 1.3.6.1.4.1.97.2.15.1.1.2 | ColumnsxtrapEnabled | read-write | mandatory | Enable or disable the generation of this trap. |
| 1.3.6.1.4.1.97.2.15.1.1.3 | ColumnsxtrapSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.2.15.1.1.4 | ColumnsxtrapText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.2.15.2 | TablesxtrapSeverityControlTable | not-accessible | mandatory | This table contains information about whether a class of traps of a particular severity are enabled or disabled. |
| 1.3.6.1.4.1.97.2.15.2.1 | RowsxtrapSeverityControl | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.15.2.1.1 | ColumnsxtrapSeverityControlSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.2.15.2.1.2 | ColumnsxtrapSeverityEnable | read-write | mandatory | Enable or disable all traps of a given severity level. |
| 1.3.6.1.4.1.97.2.15.3 | ScalarsxtrapIncludeText | read-write | mandatory | Whether or not a formatted text string is included in the trap PDU. |
| 1.3.6.1.4.1.97.2.15.4 | ScalarsxtrapTime | read-write | mandatory | The time, in centiseconds, which should expire between the sending of traps. |
| 1.3.6.1.4.1.97.2.15.5 | ScalarsxtrapRetry | read-write | mandatory | The number of times any enterprise-specific trap is to be sent for a given event. PDUs are retried using a truncated exponential backoff: 2 seconds, 4 seoncs, … |
| 1.3.6.1.4.1.97.2.15.6 | ScalarsxtrapEntryNumber | read-only | mandatory | The number of traps that are in the sxtrapTable. |
| 1.3.6.1.4.1.97.2.15.7 | TablesxtrapTable | not-accessible | mandatory | This table contains the latest traps that have been generated. |
| 1.3.6.1.4.1.97.2.15.7.1 | RowsxtrapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.2.15.7.1.1 | ColumnsxtrapEntryIndex | read-only | mandatory | A number representing the order in which the trap occurred in time. This 32 bit number can wrap. |
| 1.3.6.1.4.1.97.2.15.7.1.2 | ColumnsxtrapEntryTimeStamp | read-only | mandatory | The time at which the trap occurred. |
| 1.3.6.1.4.1.97.2.15.7.1.3 | ColumnsxtrapEntryText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.2.15.7.1.4 | ColumnsxtrapNumber | read-only | mandatory | The specific trap number, as specified in the TRAP PDU. |
| 1.3.6.1.4.1.97.2.15.7.1.5 | ColumnsxtrapEntrySeverity | read-only | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.3 | NodesxPortFunctionsTrap | Sent whenever the current functional state (active protocols) of the port has changed. | ||
| 1.3.6.1.4.1.97.4 | NodesxRxQueuesTrap | Sent whenever the number of times that the port's receiver has stopped receiving packets due to buffer space shortages has exceeded the port's limit. | ||
| 1.3.6.1.4.1.97.5 | NodesxTxStormFlagTrap | Sent whenever multicast storm protection has been invoked for the port. | ||
| 1.3.6.1.4.1.97.6 | NodesxTxCongestsTrap | Sent whenever packets destined for the unit itself were discarded due to lack of buffer space. | ||
| 1.3.6.1.4.1.97.7 | NodesxFilterThreshTrap | Sent whenever usage of a port's combination filter has exceeded the filter's limits. | ||
| 1.3.6.1.4.1.97.8 | NodesxDebugStringIdTrap | Send whenever the unit has a debug text string to be displayed. The text strings are sent in a stream-like fashion. | ||
| 1.3.6.1.4.1.97.9 | NodesxLpbkOperationTrap | Send whenever the unit has finished a loop back test, or a loop back error has been detected. | ||
| 1.3.6.1.4.1.97.10 | NodesxTrunkStateTrap | A trunking state change transition has occurred. The possible transitions are: CLOSED-ONEWAY ONEWAY-PERTURBED PERTURBED-JOINED JOINED-HELDDOWN CLOSED-HELDDOWN … | ||
| 1.3.6.1.4.1.97.11 | NodesxTrunkBridgeAddrTrap | The associated trunking MAC address of the bridge ID of the remote bridge has changed. | ||
| 1.3.6.1.4.1.97.12 | NodesxTrunkIPAddrTrap | The associated trunking IP address of the remote bridge has changed. | ||
| 1.3.6.1.4.1.97.13 | NodesxTrunkErrorTrap | An error has occurred in trunking. | ||
| 1.3.6.1.4.1.97.14 | NodesxTrunkLinkOrdinalTrap | The port's index in the trunking group has changed. | ||
| 1.3.6.1.4.1.97.15 | NodesxTrunkLinkCountTrap | The number of ports in the trunking group has changed. | ||
| 1.3.6.1.4.1.97.16 | NodesxDiagUnitBootedTrap | The unit has booted. sxadminFatalErr contains information about why the unit rebooted. | ||
| 1.3.6.1.4.1.97.17 | NodesxStorageFailureTrap | Sent if the unit's Configuration EEPROM has failed. The unit will not be able to reboot, and must be returned to the factory. | ||
| 1.3.6.1.4.1.97.18 | NodesxPortCongestedTrap | Sent whenever outbound congestion control has been invoked for the port. | ||
| 1.3.6.1.4.1.97.19 | NodesxTopChangeBegunTrap | The spanning tree topology has begun to change. | ||
| 1.3.6.1.4.1.97.20 | NodesxTopChangeEndTrap | The spanning tree topology has stopped changing. | ||
| 1.3.6.1.4.1.97.21 | NodesxIfErrorsTrap | Sent whenever the number of hardware errors in received and transmitted packets has exceeded the port's limit. | ||
| 1.3.6.1.4.1.97.22 | NodesxStRootIDTrap | The spanning tree root bridge ID for the unit has changed. | ||
| 1.3.6.1.4.1.97.23 | NodesxStRootCostTrap | The unit's spanning tree cost to the root bridge has changed. | ||
| 1.3.6.1.4.1.97.24 | NodesxStRootPortTrap | The unit's spanning tree root port has changed. | ||
| 1.3.6.1.4.1.97.25 | NodesxStMaxAgeTrap | The unit's spanning tree maximum age has changed. | ||
| 1.3.6.1.4.1.97.26 | NodesxStHelloTimeTrap | The unit's spanning tree hello time has changed. | ||
| 1.3.6.1.4.1.97.27 | NodesxStForwardDelayTrap | The unit's spanning tree forward delay time has changed. | ||
| 1.3.6.1.4.1.97.28 | NodesxStDesigRootTrap | The Root Bridge ID in received Spanning Tree Configuration BPDUs from the port has changed. | ||
| 1.3.6.1.4.1.97.29 | NodesxStPortDesigBridgeTrap | The bridge ID of the spanning tree designated bridge of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.4.1.97.30 | NodesxStPortDesigCostTrap | The cost to the spanning tree root bridge from the designated port of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.4.1.97.31 | NodesxStPortDesigPortTrap | The port ID of the spanning tree designated port of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.4.1.97.32 | NodesxStPortStateTrap | The spanning tree state of the port has changed. | ||
| 1.3.6.1.4.1.97.100 | NodesxhwDiagTrap | Sent whenever the unit's diagnostics have indicated an error. |