MIB Viewer

Fore-Callrecord-MIB

58 objects
Fore call recording mib.
Imported Objects
Fore-Common-MIBEntryStatus software
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.326.2.2.2.3.1IdentitycrGroupFore call recording mib.
1.3.6.1.4.1.326.2.2.2.3.1.1NodecrXfrGroup
1.3.6.1.4.1.326.2.2.2.3.1.1.1TablecrXfrTablenot-accessiblecurrentA table of feature-specific information pertaining to Callrecord transfers.
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1RowcrXfrEntrynot-accessiblecurrentA table entry containing information for Callrecord transfers from the switch(fabric) for a particular feature.
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.1ColumncrXfrIndexread-onlycurrentThe index for a particular feature within the crXfrTable.
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.2ColumncrXfrPrimaryUrlread-createcurrentThis is the specification of the Primary URL for callrecord transfers. The URL is in the form: //<ip-address>[:port][<pathname>[<filename>]] This includes the …
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.3ColumncrXfrSecondaryUrlread-createcurrentThis is the specification of the Secondary URL for callrecord transfers. The URL is in the form: //<ip-address>[:port][<pathname>[<filename>]] Please refer to …
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.4ColumncrXfrRecordingIntervalread-createcurrentThe interval (in minutes) at which the the relevant information is transferred to the host. The default setting will be 5 minutes. If crAdminStatus is `on' and…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.5ColumncrXfrUserIdread-createobsoleteThe userid to be used for the data transfer sessions to the primary and secondary data servers. If crAdminStatus is `on' and this value is changed, the change …
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.6ColumncrXfrPasswordread-createobsoleteThe password to be used for the data transfer sessions to the primary and secondary data servers. If crAdminStatus is `on' and this value is changed, the chang…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.7ColumncrXfrTransferStatusread-onlycurrentA message describing the status of the current file transfer. If the data transfer is not successful, refer to the crXfrPrimaryTrapStatus or crXfrSecondaryTrap…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.8ColumncrXfrStatusTextread-onlycurrentA message describing the status of the last file transfer.
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.9ColumncrXfrPrimaryTrapStatusread-onlycurrentThe trap status of the file transfer to the primary URL. The trap status will be set to `crXfrNoError' at the start of the data transfer process and if the con…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.10ColumncrXfrSecondaryTrapStatusread-onlycurrentThe trap status of the file transfer to the secondary URL. The trap status will be set to `crXfrNoError' at the start of the data transfer process and if the c…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.11ColumncrXfrPrimaryXfrFailedread-onlycurrentThe number of failed data transfers to the primary data server
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.12ColumncrXfrSecondaryXfrFailedread-onlycurrentThe number of failed data transfers to the secondary data server
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.13ColumncrXfrEntryStatusread-createcurrentThe status of this entry in the crXfr table.
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.14ColumncrXfrPrimaryUserIdread-createcurrentThe userid to be used for the data transfer session to the primary data server. If crAdminStatus is `on' and this value is changed, the change goes into effect…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.15ColumncrXfrPrimaryPasswordread-createcurrentThe password to be used for the data transfer session to the primary data server. If crAdminStatus is `on' and this value is changed, the change goes into effe…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.16ColumncrXfrSecondaryUserIdread-createcurrentThe userid to be used for the data transfer session to the secondary data server. If crAdminStatus is `on' and this value is changed, the change goes into effe…
1.3.6.1.4.1.326.2.2.2.3.1.1.1.1.17ColumncrXfrSecondaryPasswordread-createcurrentThe password to be used for the data transfer session to the secondary data server. If crAdminStatus is `on' and this value is changed, the change goes into ef…
1.3.6.1.4.1.326.2.2.2.3.1.2NodecrConfGroup
1.3.6.1.4.1.326.2.2.2.3.1.2.1ScalarcrAdminStatusread-writecurrentSpecifies whether Callrecord is On or Off. By default, it is set to Off. If it is changed, the change takes effect immediately.
1.3.6.1.4.1.326.2.2.2.3.1.2.2ScalarcrMemoryAllocatedread-writeobsoleteA percentage specifying what portion of the mainheap (connection or user space) is to be reserved for Callrecords. The default setting will be 15%. This variab…
1.3.6.1.4.1.326.2.2.2.3.1.2.3ScalarcrMemOflowActionread-writecurrentThis specifies the action that the switch(fabric) should take if the memory allocated for Callrecord runs out. rejectCall(1) specifies that the call should be …
1.3.6.1.4.1.326.2.2.2.3.1.2.4ScalarcrAdminMinRecordsread-writecurrentThis specifies the minimum number of call records which will be stored in the pool memory. Specifying a value of 0 implies that the default value for this vari…
1.3.6.1.4.1.326.2.2.2.3.1.2.5ScalarcrAdminMaxRecordsread-writecurrentThis specifies the maximum number of call records which could be stored in the pool memory. A value of 0 implies that the Call Records pool size is only limite…
1.3.6.1.4.1.326.2.2.2.3.1.2.6ScalarcrOperRecordsread-onlycurrentThis specifies the number of call records which are currently stored in the pool memory.
1.3.6.1.4.1.326.2.2.2.3.1.2.7ScalarcrAdminMinDTBsread-writecurrentThis specifies the minimum number of data transfer buffers which will be stored in the pool memory. Specifying a value of 0 implies that the default value for …
1.3.6.1.4.1.326.2.2.2.3.1.2.8ScalarcrAdminMaxDTBsread-writecurrentThis specifies the maximum number of data transfer buffers which could be stored in the pool memory. A value of 0 implies that the DTB pool size is only limite…
1.3.6.1.4.1.326.2.2.2.3.1.2.9ScalarcrOperDTBsread-onlycurrentThis specifies the number of data transfer buffers which are currently stored in the pool memory.
1.3.6.1.4.1.326.2.2.2.3.1.2.10ScalarcrOperStatusread-onlycurrentSpecifies whether Callrecord is Operationally active, inactive or is in the processs of shutting down. Shutting sown occurs when call recording has been admini…
1.3.6.1.4.1.326.2.2.2.3.1.2.11ScalarcrCounterCollectionIntervalread-onlycurrentThe interval (in seconds) at which the relevant hardware counters will be collected and maintained. These counter values will be transferred to the host at eve…
1.3.6.1.4.1.326.2.2.2.3.1.3NodecrStatsGroup
1.3.6.1.4.1.326.2.2.2.3.1.3.1ScalarcrCallsRejectedread-onlycurrentThe number of calls rejected due to failure to allocate a callrecord.
1.3.6.1.4.1.326.2.2.2.3.1.3.2ScalarcrCallsNotRecordedread-onlycurrentThe number of calls accepted even when there was a failure to allocate a callrecord.
1.3.6.1.4.1.326.2.2.2.3.1.3.3ScalarcrCallsOpenedread-onlycurrentThe number of calls for which a `start' callrecord was successfully generated.
1.3.6.1.4.1.326.2.2.2.3.1.3.4ScalarcrIntervalsSkippedread-onlycurrentThe number of skipped data transfers due to preceding data transfers not complete within the recording interval
1.3.6.1.4.1.326.2.2.2.3.1.3.5ScalarcrTermCallsLostread-onlycurrentThe number of terminated callrecords lost due to failure to allocate a data transfer buffer
1.3.6.1.4.1.326.2.2.2.3.1.3.6ScalarcrUpTimeread-onlycurrentThe time in hundredths of a second since Callrecord has been on at the primary, secondary or both sides. This value along with the counters are reset when the …
1.3.6.1.4.1.326.2.2.2.3.1.3.7ScalarcrCurrentCallsRecordedread-onlycurrentThe total number of calls currently being recorded.
1.3.6.1.4.1.326.2.2.2.3.1.4NodeperfConfGroup
1.3.6.1.4.1.326.2.2.2.3.1.4.1ScalarperfAdminStatusread-writecurrentSpecifies whether performance monitoring is On or Off. By default, it is set to Off. If it is changed, the change takes effect immediately.
1.3.6.1.4.1.326.2.2.2.3.1.5NodecrFilterGroup
1.3.6.1.4.1.326.2.2.2.3.1.5.1TablecrFilterTablenot-accessiblecurrentA table of filters for which call records are to be generated.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1RowcrFilterEntrynot-accessiblecurrentA table entry containing a filter for applying to call recording.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.1ColumncrFilterPortread-onlycurrentThe Port index for a particular feature within the crFilterTable is to be set.A Value of 16777215 signifies ANY PORT.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.2ColumncrFilterVpiread-onlycurrentThe Vpi index for a particular feature within the crFilterTable is to be set.A Value of 16777215 signifies ANY VPI. However the ANY VPI value can only be used …
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.3ColumncrFilterVciread-onlycurrentThe Vci index for a particular feature within the crFilterTable is to be set. A Value of 16777215 signifies ANY VCI. However the value of ANY VCI can only be u…
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.4ColumncrFilterPVCSupportread-createcurrentSpecifies if PVCs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.5ColumncrFilterPVPSupportread-createcurrentSpecifies if PVPs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.6ColumncrFilterSVCSupportread-createcurrentSpecifies if SVCs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.7ColumncrFilterSVPSupportread-createcurrentSpecifies if SVPs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.8ColumncrFilterSPVCSupportread-createcurrentSpecifies if SPVCs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.9ColumncrFilterSPVPSupportread-createcurrentSpecifies if SPVPs on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.10ColumncrFilterFailedCallSupportread-createcurrentSpecifies if Failed Calls on this interface are to be recorded.
1.3.6.1.4.1.326.2.2.2.3.1.5.1.1.11ColumncrFilterEntryStatusread-createcurrentThe SNMP status of this Expansion entry.
Type Definitions
NameSyntaxStatusDescription
CrXfrTrapStatusINTEGER { crXfrNoError(1), crXfrNoResponseFromServer(2), crXfrAccessViolation(3), crXfrDiskFullorAllocationExceeded(4), crXfrOtherError(5) }