MIB Viewer

Fore-DS1-MIB

67 objects
Fore DS1 mib module for supporting the DS1 port module.
Imported Objects
Fore-Common-MIBasx
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.326.2.2.1.1.7IdentityforeDs1Fore DS1 mib module for supporting the DS1 port module.
1.3.6.1.4.1.326.2.2.1.1.7.1Nodeds1ConfGroup
1.3.6.1.4.1.326.2.2.1.1.7.1.1Tableds1ConfTablenot-accessiblecurrentA table of DS1 switch port configuration information.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1Rowds1ConfEntrynot-accessiblecurrentA table entry containing DS1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.1Columnds1ConfBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.2Columnds1ConfModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.3Columnds1ConfPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.4Columnds1LineTyperead-onlycurrentThis variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.5Columnds1LineCodingread-onlycurrentThis variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteristics. ds1B8ZS (2) refers to th…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6Columnds1SendCoderead-writecurrentThis variable indicates what type of code is being sent across the DS1 interface by the device. The values mean: ds1SendNoCode sending looped or normal data ds…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.7Columnds1ReceiveCoderead-onlycurrentThis variable indicates the type of code that was received across the DS interface. The values mean: ds1ReceiveNoCode receiving looped or normal data ds1Receiv…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.8Columnds1LoopbackConfigread-writecurrentThis variable represents the loopback configuration of the DS1 interface. This variable is defined in the rfc1406 configuration table as dsx1LoopbackConfig, wi…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.9Columnds1TxClockSourceread-writecurrentThe source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTiming(2) indicates that a local s…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.12Columnds1LineStatusread-onlycurrentThis variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1LineStatus. The variable contai…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.13Columnds1IdleUnassignedCellsread-writecurrentThis variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be se…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.14Columnds1LineTypeFramingread-writecurrentThis variable indicates the way ATM cells are constructed from the DS1 stream. ds1Hcs(2) indicates that the ATM cells are constructed upon the Header Check Seq…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15Columnds1LineLengthread-writecurrentThis variable represents the length of the physical cable connected to the ds1 port. The user has to set this object to match the physical cable in order to ge…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.16Columnds1RxScramblingread-writecurrentThis variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.17Columnds1TxScramblingread-writecurrentThis variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.18Columnds1TxPRBSread-writecurrentThis variable controls the Pseudo-Random Bit Sequence Generator (PRSG) which generates an unframed 2^15-1 test sequence as define in Recommendation O.151. The …
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.19Columnds1CRCErrThrSecondsread-writecurrentThis variable represents the consecutive number of BAD/GOOD seconds to detect/clear an Excessive CRC Error Defect. The range of values it can take is between 2…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.20Columnds1CRCErrThrErrorsread-writecurrentThis variable is a threshold for the number of CRC Errors per second and is used as a parameter to the Excessive CRC Error Defect. If the number of errors exce…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.21Columnds1CRCErrFailEnableread-writecurrentThis variable controls whether declaration of an Excessive CRC Error Defect forces the port's operState to Down.
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.22Columnds1SigFailBerread-writecurrentThis is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, represents a BER of 1E-4. This …
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.23Columnds1SigDegradeBerread-writecurrentThis is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -8, for example, represents a BER of 1E-8. Th…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.24Columnds1BerErrorModelread-writecurrentThis is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and…
1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.25Columnds1BerStateread-onlycurrentThis value describes the current state of the port as determined through bit error rate analysis.
1.3.6.1.4.1.326.2.2.1.1.7.2Nodeds1StatsGroup
1.3.6.1.4.1.326.2.2.1.1.7.2.1Tableds1FramingTablenot-accessiblecurrentA table of DS1 framing statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1Rowds1FramingEntrynot-accessiblecurrentA table entry containing DS1 framing statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.1Columnds1FramingBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.2Columnds1FramingModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.3Columnds1FramingPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.4Columnds1FramingLOSsread-onlycurrentThe number of seconds in which Loss Of Signal (LOS) errors have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.5Columnds1FramingLCVsread-onlycurrentThe number of Line Code Violations (LCV) that have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.6Columnds1FramingFERRsread-onlycurrentThe number of Framing ERRor (FERR) events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.7Columnds1FramingOOFsread-onlycurrentThe number of Out Of Frame (OOF) error events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.8Columnds1FramingAISsread-onlycurrentThe number of seconds in which Alarm Indication Signals (AIS) have been detected. AIS indicates that an upstream failure has been detected by the far end.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.9Columnds1FramingB8ZSPatternsread-onlydeprecatedThe number of seconds in which B8ZS Pattern events have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.10Columnds1Framing8Zerosread-onlydeprecatedThe number of seconds in which 8 Zeros events have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.11Columnds1Framing16Zerosread-onlydeprecatedThe number of seconds in which 16 Zeros events have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.12Columnds1FramingYellowAlarmsread-onlycurrentThe number of seconds in which Yellow Alarm events have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.13Columnds1FramingRedAlarmsread-onlycurrentThe number of seconds in which Red Alarm events have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.14Columnds1FramingBEEsread-onlycurrentThe number of Bit Encoding Error (BEE) events that have been detected. A Bit Error Event is defined as a CRC-6 error in ESF.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.15Columnds1FramingPRBSsread-onlycurrentThe number of seconds in which Pseudo Random Bit Sequence (PRBS) patterns have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.1.1.16Columnds1FramingBERsread-onlycurrentThe number of PRBS Bit ERror events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.7.2.2Tableds1PlcpTablenot-accessiblecurrentA table of DS1 Physical Layer Convergence Protocol (Procedure) statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1Rowds1PlcpEntrynot-accessiblecurrentA table entry containing DS1 PLCP statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.1Columnds1PlcpBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.2Columnds1PlcpModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.3Columnds1PlcpPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.4Columnds1PlcpBIP8sread-onlycurrentNumber of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associated ATM cell of the previous fra…
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.5Columnds1PlcpFERRsread-onlycurrentNumber of Physical Layer Convergence Protocol (PLCP) octet error events.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.6Columnds1PlcpFEBEsread-onlycurrentNumber of ATM Far End Block Error (FEBE) events.
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.7Columnds1PlcpLOFsread-onlycurrentThe number of seconds in which Loss Of Frame (LOF) errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. LOF is declared when an Out…
1.3.6.1.4.1.326.2.2.1.1.7.2.2.1.8Columnds1PlcpYellowsread-onlycurrentThe number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yellow alarm is asserted when 10 c…
1.3.6.1.4.1.326.2.2.1.1.7.2.3Tableds1AtmTablenot-accessiblecurrentA table of DS1 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1Rowds1AtmEntrynot-accessiblecurrentA table entry containing DS1 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.1Columnds1AtmBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.2Columnds1AtmModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.3Columnds1AtmPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.4Columnds1AtmHCSsread-onlycurrentNumber of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.5Columnds1AtmRxCellsread-onlycurrentNumber of ATM cells that were received.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.6Columnds1AtmTxCellsread-onlycurrentNumber of non-null ATM cells that were transmitted.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.7Columnds1AtmUHCSsread-onlycurrentNumber of uncorrectable header check sequence (UHCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.8Columnds1AtmCHCSsread-onlycurrentNumber of correctable header check sequence (UHCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
1.3.6.1.4.1.326.2.2.1.1.7.2.3.1.9Columnds1AtmLCDsread-onlycurrentThe number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4m…