Fore-Framnetmod-MIB
29 objects
This is the FRAM netmod proprietory MIB. Currently, this mib defines one table: nmFramNetmodConfTable This table contains configuration information for FRAM netmod.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.1.16.3 | Identityfram | This is the FRAM netmod proprietory MIB. Currently, this mib defines one table: nmFramNetmodConfTable This table contains configuration information for FRAM ne… | ||
| 1.3.6.1.4.1.326.1.16.3.1 | TablenmFramNetmodConfTable | not-accessible | current | This table has the objects for configuration of a FRAM netmod. Creation of an entry for this table is triggered by setting moduleState to inService. moduleStat… |
| 1.3.6.1.4.1.326.1.16.3.1.1 | RownmFramNetmodConfEntry | not-accessible | current | A table entry containing FRAM netmod specific config information |
| 1.3.6.1.4.1.326.1.16.3.1.1.1 | ColumnnmFramBoard | read-only | current | the index of this board within the ATM switch, equivalent to moduleBoard of moduleTable defined in fore-switch.mib |
| 1.3.6.1.4.1.326.1.16.3.1.1.2 | ColumnnmFramModule | read-only | current | the number of this network module within the ATM switch board, equivalent to moduleNumber of moduleTable defined in fore-switch.mib |
| 1.3.6.1.4.1.326.1.16.3.1.1.3 | ColumnnmFramEpdPpdBufferProportion | read-write | current | Configuration of the buffer size configuration for the high and low priority cell. The sum of high and low priority buffers capacity is fixed, i.e., highzero s… |
| 1.3.6.1.4.1.326.1.16.3.1.1.4 | ColumnnmFramEpdclp1HighPrio | read-write | current | The threshold for the high priority buffer for EPD and CLP=1 in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.5 | ColumnnmFramEpdclp0HighPrio | read-write | current | The threshold for the high priority buffer for EPD and CLP=0 in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.6 | ColumnnmFramPpdclp1HighPrio | read-write | current | The threshold for the high priority buffer for PPD and CLP=1, in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.7 | ColumnnmFramEpdclp1LowPrio | read-write | current | The threshold for the Low priority buffer for EPD and CLP=1 in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.8 | ColumnnmFramEpdclp0LowPrio | read-write | current | The threshold for the Low priority buffer for EPD and CLP=0 in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.9 | ColumnnmFramPpdclp1LowPrio | read-write | current | The threshold for the Low priority buffer for ppd and CLP=1 in percentage of the available size |
| 1.3.6.1.4.1.326.1.16.3.1.1.10 | ColumnnmFramOamF5Supervision | read-write | current | enable/disable the FR/ATM interworking OAM F5 function on FRAM netmod |
| 1.3.6.1.4.1.326.1.16.3.1.1.11 | ColumnnmFramOamF5AISRxPeriod | read-write | current | Time interval at which an AIS OAM cells is to be received, value is a measurement in seconds |
| 1.3.6.1.4.1.326.1.16.3.1.1.12 | ColumnnmFramOamF5AISTxPeriod | read-write | current | Time interval at which an AIS OAM cells is to be transmitted, value is a measurement in seconds |
| 1.3.6.1.4.1.326.1.16.3.1.1.13 | ColumnnmFramOamF5RDIRxPeriod | read-write | current | Time interval at which an RDI OAM cells is to be received, value is a measurement in seconds |
| 1.3.6.1.4.1.326.1.16.3.1.1.14 | ColumnnmFramOamF5RDITxPeriod | read-write | current | Time interval at which an RDI OAM cells is to be transmitted, value is a measurement in seconds |
| 1.3.6.1.4.1.326.1.16.3.1.1.15 | ColumnnmFramOperState | read-only | deprecated | This is the operational state corresponding to the FRAM netmod startup state machine. |
| 1.3.6.1.4.1.326.1.16.3.1.1.16 | ColumnnmFramApplSwRelease | read-only | deprecated | The Embedded Software Version number running on this netmod |
| 1.3.6.1.4.1.326.1.16.3.1.1.17 | ColumnnmFramBootSwRelease | read-only | deprecated | The Boot Software Version number running on this netmod |
| 1.3.6.1.4.1.326.1.16.3.1.1.18 | ColumnnmFramApplKey | read-write | deprecated | This object is for the purpose of setting up the Application type for the FRAM netmod. The application key should be specified when the application type is `un… |
| 1.3.6.1.4.1.326.1.16.3.1.1.19 | ColumnnmFramApplication | read-write | current | This object is for the purpose of setting up the Application type for the FRAM netmod. Changing the application type will cause the netmod to be reset and old … |
| 1.3.6.1.4.1.326.1.16.3.1.1.20 | ColumnnmFramOosLED | read-only | deprecated | Indicates the netmod service status. This LED is normally dark. When it becomes red, the netmod is Out Of Service (OOS) and can be removed. FRAM netmod can be … |
| 1.3.6.1.4.1.326.1.16.3.1.1.21 | ColumnnmFramMaxSigPathsPerPort | read-write | current | This object specifies the max number of UNI instances per port which can be created for FUNI SVC Signaling Support. In other words, this object defines the max… |
| 1.3.6.1.4.1.326.1.16.3.1.1.22 | ColumnnmFramStatsMonitor | read-write | current | This object specifies whether statistics are to be counted by the netmod system. The object controls from an overall perspective whether netmod, service and co… |
| 1.3.6.1.4.1.326.1.16.3.1.1.23 | ColumnnmFramStatsEnabledTimeStamp | read-only | current | nmFramStatsEnabledTimeStamp reflects the time, with reference to sysUpTime, when nmFramStatsMonitor is set to enabled. This will, therefore, provide a starting… |
| 1.3.6.1.4.1.326.1.16.3.1.1.24 | ColumnnmFramMsgType | read-only | current | This object is the identifier number of the messages that are sent from The SCP to the FRAM netmods. |
| 1.3.6.1.4.1.326.1.16.3.1.1.25 | ColumnnmFramNakCause | read-only | current | This object is the error code that indicates why a message sent from the SCP to the FRAM netmod did not succeed. |
| 1.3.6.1.4.1.326.2.2.0.2003 | NotificationframNakMsg | current | This trap is sent when a message from the SCP to the FRAM netmod does not succeed. |