MIB Viewer

Fore-J2-MIB

36 objects
write something interesting here
Imported Objects
Fore-Common-MIBasx
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.326.2.2.1.1.6IdentityforeJ2write something interesting here
1.3.6.1.4.1.326.2.2.1.1.6.1Nodej2ConfGroup
1.3.6.1.4.1.326.2.2.1.1.6.1.1Tablej2ConfTablenot-accessiblecurrentA table of J2 switch port configuration information.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1Rowj2ConfEntrynot-accessiblecurrentA table entry containing J2 configuration information for each port.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.1Columnj2ConfBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.2Columnj2ConfModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.3Columnj2ConfPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.4Columnj2LineLengthread-writecurrentThis variable represents the length of the physical medium connected to the J2 interface: j2ShortLine (1) means the line is a short line with less than 4db of …
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.5Columnj2LoopbackConfigread-writecurrentThis variable represents the loopback configuration of the J2 interface. j2NoLoop (1) means that the interface is not in a loopback state. j2LineLoop (2) means…
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.6Columnj2TxClockSourceread-writecurrentThe source of the transmit clock.
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.7Columnj2LineStatusread-onlycurrentThis variable indicates the Line Status of the interface. The variable contains loopback state information and failure state information. It is a bit map repre…
1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.8Columnj2IdleUnassignedCellsread-writecurrentThis variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be se…
1.3.6.1.4.1.326.2.2.1.1.6.2Nodej2StatsGroup
1.3.6.1.4.1.326.2.2.1.1.6.2.1Tablej2ErrorTablenot-accessiblecurrentA table of J2 error counters.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1Rowj2ErrorEntrynot-accessiblecurrentA table entry containing J2 error counters.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.1Columnj2ErrorBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.2Columnj2ErrorModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.3Columnj2ErrorPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.4Columnj2B8ZSCodingErrorsread-onlycurrentThe number of B8ZS coding violation errors.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.5Columnj2CRC5Errorsread-onlycurrentThe number of CRC-5 received errors.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.6Columnj2FramingErrorsread-onlycurrentThe number of framing patterns received in error.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.7Columnj2RxLossOfFrameread-onlycurrentThe number of seconds during which the receiver was experiencing Loss Of Frame.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.8Columnj2RxLossOfClockread-onlycurrentThe number of seconds during which the receiver was not observing transitions on the received clock signal.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.9Columnj2RxAISread-onlycurrentThe number of seconds during which the receiver detected an Alarm Indication Signal.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.10Columnj2TxLossOfClockread-onlycurrentThe number of seconds during which the transmitter was experiencing Loss Of Clock.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.11Columnj2RxRemoteAISread-onlycurrentThe number of seconds during which the receiver observed the Alarm Indication Signal in the m-bits channel.
1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.12Columnj2RxLossOfSignalread-onlycurrentThe number of seconds during which the transmitter was experien cing Loss Of Signal.
1.3.6.1.4.1.326.2.2.1.1.6.2.2Tablej2AtmTablenot-accessiblecurrentA table of J2 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1Rowj2AtmEntrynot-accessiblecurrentA table entry containing J2 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.1Columnj2AtmBoardread-onlycurrentThe index of this port's switch board.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.2Columnj2AtmModuleread-onlycurrentThe network module of this port.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.3Columnj2AtmPortread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.4Columnj2AtmHCSsread-onlycurrentNumber of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.5Columnj2AtmRxCellsread-onlycurrentNumber of ATM cells that were received.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.6Columnj2AtmTxCellsread-onlycurrentNumber of non-null ATM cells that were transmitted.
1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.7Columnj2AtmLCDsread-onlycurrentThe number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4m…