Fore-SONET-MIB
79 objects
The implementation of the foreSonet tables is mandatory for all switches that have SONET/SDH port modules.
Imported Objects
| Fore-Common-MIB | asx |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.4 | IdentityforeSonetModule | The implementation of the foreSonet tables is mandatory for all switches that have SONET/SDH port modules. | ||
| 1.3.6.1.4.1.326.2.2.1.1.4.1 | NodesonetConfGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1 | TablesonetConfTable | not-accessible | current | A table of SONET switch port configuration information. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1 | RowsonetConfEntry | not-accessible | current | A table entry containing SONET configuration information for each port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.1 | ColumnsonetConfBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.2 | ColumnsonetConfModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.3 | ColumnsonetConfPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.4 | ColumnsonetLineType | read-only | current | This variable describes the line type for this interface. The line type for optical SONET signals may be single-mode (short or long range) or multi-mode fiber.… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.5 | ColumnsonetLineCoding | read-only | current | This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET signals (STS-1 and STS-3). The Non-Return to Zero (N… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.6 | ColumnsonetFramingStandardDefault | read-only | current | This variable identify the default value of the framing standard that is used by this port (SONET or SDH). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.7 | ColumnsonetFramingStandardOper | read-write | current | This variable identify the operational value of the framing standard that is used by this port (SONET or SDH). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.8 | ColumnsonetPathWidth | read-only | current | This variable indicates the type of the SONET Path. Assigned types are the STS-Nc Synchronous Payload Envelopes where N=1,3,9,12,24,48. STS-1 is equal to 51.84… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.9 | ColumnsonetLoopbackConfig | read-write | current | This variable represents the current loopback status of the SONET interface. The possible values are: sonetNoLoop (1) means that the interface is not in a loop… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.10 | ColumnsonetTxClockSource | read-write | current | The source of the transmit clock. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.11 | ColumnsonetRxScrambling | read-write | current | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.12 | ColumnsonetTxScrambling | read-write | current | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.13 | ColumnsonetSectionStatus | read-only | current | This variable indicates the Section Status of the interface. It is defined in the SONET IETF draft section configuration table as sonetSectionStatus. The varia… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.14 | ColumnsonetLineStatus | read-only | current | This variable indicates the Line Status of the interface. A similar variable is defined in the SONET IETF draft line configuration table as sonetLineStatus. Th… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.15 | ColumnsonetPathStatus | read-only | current | This variable indicates the Path Status of the interface. It is defined in the SONET IETF draft path configuration table as sonetPathStatus. The variable is a … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.16 | ColumnsonetIdleUnassignedCells | read-write | current | This variable indicates the type of cells that should be sent in case there is no data to send. According to the ATM Forum, Unassigned cells should be sent (oc… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.17 | ColumnsonetAtmStatus | read-only | current | This variable indicates the ATM Status of the interface. The variable is a bit map represented as a sum, therefore, it can represent multiple defects simultane… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.18 | ColumnsonetLineAis | read-write | current | This variable controls the insertion of line alarm indication signal (AIS_L). When set to sonetLineAisOn, AIS is inserted into the transmit SONET stream. Line … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.19 | ColumnsonetLineRdi | read-write | current | The variable controls the insertion of Line Remote Defect Indication (RDI_L). When set to sonetLineRdiAuto, RDI_L is automatically inserted into the transmit S… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.20 | ColumnsonetPathAis | read-write | current | This variable controls the insertion of STS Path Alarm Indication Signal (AIS_P). When set to sonetPathAisOn, the complete SPE, and the pointer bytes (H1, H2, … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.21 | ColumnsonetPathRdi | read-write | current | This variable controls the insertion of Path Remote Defect Indication (RDI_P). When set to sonetPathRdiAuto, RDI_P is automatically inserted into the transmit … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.22 | ColumnsonetFebe | read-write | current | This variable controls the insertion of line and path far end block errors. When set to sonetFebeAuto, one line or path FEBE is inserted for each line or path … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.23 | ColumnsonetRxPathSignalLabel | read-only | current | This variable contains the path signal label byte (C2). The value in this variable is updated to a new path signal label value if the same new value is observe… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.24 | ColumnsonetTxPathSignalLabel | read-write | current | This variable controls the transmit path signal label. The default value for ATM is 0x13 (19 decimal). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.25 | ColumnsonetArbitraryPointer | read-write | current | This variable controls bits APTR[9:0] of arbitrary pointer register. It may be used along with the sonetPathPointerDiagnostic variable to generate LOP errors o… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.26 | ColumnsonetSectionDiagnostic | read-write | current | This variable controls the insertion of various types of section diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. Under… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.27 | ColumnsonetLineDiagnostic | read-write | current | This variable controls the insertion of various types of line diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. Under no… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.28 | ColumnsonetPathDiagnostic | read-write | current | This variable controls the insertion of various types of path diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. Under no… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29 | ColumnsonetPathPointerDiagnostic | read-write | current | This variable controls the insertion of various types of path pointer diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.30 | ColumnsonetAtmDiagnostic | read-write | current | This variable controls the insertion of various types of atm diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. Under nor… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.31 | ColumnsonetLineBipThrSeconds | read-write | current | This variable represents the consecutive number of BAD/GOOD seconds to detect/clear a B2 byte Line Bit Interleaved Parity (BIP) Defect. The range of the values… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.32 | ColumnsonetLineBipThrErrors | read-write | current | This variable is a threshold for the number of B2 byte Line Bit Interleaved Parity (BIP) Errors per second and is used as a parameter to the Line BIP Defect. I… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.33 | ColumnsonetLineBipFailEnable | read-write | current | This variable controls whether declaration of a Line BIP Defect forces the port's operState to Down. This variable is only applicable when sonetLineBerErrorMod… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.34 | ColumnsonetLineSignalDegradeBer | read-write | current | This is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -7, for example, represents a BER of 1E-7. Th… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.35 | ColumnsonetLineSignalFailBer | read-write | current | This is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, represents a BER of 1E-4. This … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.36 | ColumnsonetLineBerErrorModel | read-write | current | This is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.37 | ColumnsonetLineBerState | read-only | current | This value describes the current state of the port as determined through bit error rate analysis. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2 | NodesonetStatsGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1 | TablesonetSectionTable | not-accessible | current | A table of SONET Section statistics and errors information. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1 | RowsonetSectionEntry | not-accessible | current | A table entry containing SONET Section statistics and errors information for every port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.1 | ColumnsonetSectionBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.2 | ColumnsonetSectionModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.3 | ColumnsonetSectionPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.4 | ColumnsonetSectionBIPs | read-only | current | The number of Section BIP-8 (Bit Interleaved Parity) errors that have been detected since the last time the port has been reset. The calculated BIP-8 code is c… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.5 | ColumnsonetSectionLOSs | read-only | current | The number of seconds in which Loss Of Signal (LOS) has occurred. A LOS is declared when 20 +/- 3us of all zeros patterns is detected. LOS is cleared when two … |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.1.1.6 | ColumnsonetSectionLOFs | read-only | current | The number of seconds in which Loss Of Frame (LOF) has occurred. A LOF is declared when an out-of-frame (OOF) condition persists for 3ms. The LOF is cleared wh… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2 | TablesonetLineTable | not-accessible | current | A table of SONET Line statistics and errors information. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1 | RowsonetLineEntry | not-accessible | current | A table entry containing SONET Line statistics and errors information for every port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.1 | ColumnsonetLineBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.2 | ColumnsonetLineModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.3 | ColumnsonetLinePort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.4 | ColumnsonetLineBIPs | read-only | current | The number of Line BIP-24 (Bit Interleaved Parity) errors that have been detected since the last time the port has been reset. The calculated BIP-24 code is ba… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.5 | ColumnsonetLineFEBEs | read-only | current | The number of line Far End Block Errors (FEBE) that have been detected since the last time the port has been reset. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.6 | ColumnsonetLineAISs | read-only | current | The number of seconds in which line Alarm Indication Signal (AIS) has occurred. A line AIS is asserted when a 111 binary pattern is detected in bits 6,7,8 of t… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.2.1.7 | ColumnsonetLineRDIs | read-only | current | The number of seconds in which line Far End Receive Failure (RDI) has occurred. A line RDI is asserted when a 110 binary pattern is detected in bits 6,7,8 of t… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3 | TablesonetPathTable | not-accessible | current | A table of SONET Path statistics and errors information. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1 | RowsonetPathEntry | not-accessible | current | A table entry containing SONET Path statistics and errors information for every port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.1 | ColumnsonetPathBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.2 | ColumnsonetPathModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.3 | ColumnsonetPathPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.4 | ColumnsonetPathBIPs | read-only | current | The number of Path BIP-8 (Bit Interleaved Parity) errors that have been detected since the last time the port has been reset. A path BIP-8 error is detected by… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.5 | ColumnsonetPathFEBEs | read-only | current | The number of path Far End Block Errors (FEBE) that have been detected since the last time the port has been reset. FEBEs are detected by extracting the 4-bit … |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.6 | ColumnsonetPathLOPs | read-only | current | The number of seconds in which path Loss Of Pointer (LOP) has occurred. A path LOP is detected when a 'normal pointer value' is not found in eight consecutive … |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.7 | ColumnsonetPathAISs | read-only | current | The number of seconds in which path Alarm Indication Signal (AIS) has occurred. A path AIS is asserted when an all-ones pattern is detected in the pointer byte… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.8 | ColumnsonetPathRDIs | read-only | current | The number of seconds in which path RDI alarm has occurred. A path RDI alarm is detected by extracting bit 5 of the path status byte. If bit 5 is high for ten … |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.9 | ColumnsonetPathUNEQs | read-only | current | The number of seconds in which a path UNEQ defect has occurred. A path UNEQ defect is detected when the STS Signal label (C2 byte) == 0x00 |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.3.1.10 | ColumnsonetPathPLMs | read-only | current | The number of seconds in which a path PLM defect has occrred. A path PLM defect is detected when the STS Signal lable (C2 bytes) != 0x00, 0x01, 0x13, 0xFC or 0… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4 | TablesonetAtmTable | not-accessible | current | A table of SONET ATM layer statistics and errors information. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1 | RowsonetAtmEntry | not-accessible | current | A table entry containing SONET ATM layer statistics and errors information for every port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.1 | ColumnsonetAtmBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.2 | ColumnsonetAtmModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.3 | ColumnsonetAtmPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.4 | ColumnsonetAtmCorrectableHCSs | read-only | current | The number of correctable Header Check Sequence (HCS) error events that occurred since the port was reset. The HCS is a CRC-8 calculation over the first 4 octe… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.5 | ColumnsonetAtmUncorrectableHCSs | read-only | current | The number of uncorrectable Header Check Sequence (HCS) error events that occurred since the port was reset. The HCS is a CRC-8 calculation over the first 4 oc… |
| 1.3.6.1.4.1.326.2.2.1.1.4.2.4.1.6 | ColumnsonetAtmLCDs | read-only | current | The number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4m… |