GARP-MIB
207 objects
GARP Module Management
Imported Objects
| ADMIN-MASTER-MIB | gbnL2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.4.2 | IdentitygarpMib | GARP Module Management | ||
| 1.3.6.1.4.1.13464.1.2.4.2.1 | NodegarpMIBObjects | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.1 | NodegDot1qBase | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.1 | ScalargDot1qVlanVersionNumber | read-only | current | The version number of IEEE 802.1Q that this device supports. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.2 | ScalargDot1qMaxVlanId | read-only | current | The maximum IEEE 802.1Q VLAN ID that this device supports. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.3 | ScalargDot1qMaxSupportedVlans | read-only | current | The maximum number of IEEE 802.1Q VLANs that this device supports. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.4 | ScalargDot1qNumVlans | read-only | current | The current number of IEEE 802.1Q VLANs that are configured in this device. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.5 | ScalargDot1qGvrpStatus | read-write | current | DURABLE: { enabled } The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.6 | TablegDot1qVlanIndexMappingTable | not-accessible | current | This table gives the mapping of linear indices to VLAN Indices. It is necessary because CCDGEN doesn't support nonlinear indices. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1 | RowgDot1qVlanIndexMappingEntry | not-accessible | current | Each entry maps a linear index to a VLAN index. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1.1 | ColumngDot1qVlanSlotIndex | read-only | current | The durable slot index for this VLAN |
| 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1.2 | ColumngDot1qVlanSlotActualIndex | read-only | current | DURABLE: { 0:all } The actual VLAN index for this durable VLAN slot |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2 | NodegDot1qTp | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.1 | TablegDot1qFdbTable | not-accessible | current | A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automa… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1 | RowgDot1qFdbEntry | not-accessible | current | Information about a specific Filtering Database. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1.1 | ColumngDot1qFdbId | not-accessible | current | The identity of this Filtering Database. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1.2 | ColumngDot1qFdbDynamicCount | read-only | current | The current number of dynamic entries in this Filtering Database. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.2 | TablegDot1qTpFdbTable | not-accessible | current | A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1 | RowgDot1qTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.1 | ColumngDot1qTpFdbAddress | not-accessible | current | A unicast MAC address for which the device has forwarding and/or filtering information. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.2 | ColumngDot1qTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of gDot1qTpFdbAd… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.3 | ColumngDot1qTpFdbStatus | read-only | current | The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corr… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.3 | TablegDot1qTpGroupTable | not-accessible | current | A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of po… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1 | RowgDot1qTpGroupEntry | not-accessible | current | Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and conta… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.1 | ColumngDot1qTpGroupAddress | not-accessible | current | The destination Group MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.2 | ColumngDot1qTpGroupEgressPorts | read-only | current | The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include po… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.3 | ColumngDot1qTpGroupLearnt | read-only | current | The subset of ports in gDot1qTpGroupEgressPorts which were learnt by GMRP or some other dynamic mechanism, in this Filtering database. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4 | TablegDot1qForwardAllTable | not-accessible | current | A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by ma… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1 | RowgDot1qForwardAllEntry | not-accessible | current | Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.1 | ColumngDot1qForwardAllPorts | read-only | current | The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been dete… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.2 | ColumngDot1qForwardAllVlanIndex | read-only | current | DURABLE: { 0:all } This is here only to allow the VLAN index to be saved along with the corresponding forward all table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.3 | ColumngDot1qForwardAllStaticPorts | read-write | current | DURABLE: { 0:all } The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in t… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.4 | ColumngDot1qForwardAllForbiddenPorts | read-write | current | DURABLE: { 0:all } The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be d… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5 | TablegDot1qForwardUnregisteredTable | not-accessible | current | A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which there is… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1 | RowgDot1qForwardUnregisteredEntry | not-accessible | current | Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forw… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.1 | ColumngDot1qForwardUnregisteredPorts | read-only | current | The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.2 | ColumngDot1qForwardUnregisteredVlanIndex | read-only | current | DURABLE: { 0:all } This is here only to allow the VLAN index to be saved along with the corresponding forward unregistered table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.3 | ColumngDot1qForwardUnregisteredStaticPorts | read-write | current | DURABLE: { 0:all } The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwa… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.4 | ColumngDot1qForwardUnregisteredForbiddenPorts | read-write | current | DURABLE: { 0:all } The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3 | NodegDot1qStatic | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1 | TablegDot1qStaticUnicastTable | not-accessible | current | A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1 | RowgDot1qStaticUnicastEntry | not-accessible | current | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.1 | ColumngDot1qStaticUnicastAddress | not-accessible | current | The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.2 | ColumngDot1qStaticUnicastReceivePort | not-accessible | current | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.3 | ColumngDot1qStaticUnicastAllowedToGoTo | read-write | current | The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of port… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.4 | ColumngDot1qStaticUnicastStatus | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2 | TablegDot1qStaticMulticastTable | not-accessible | current | A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management s… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1 | RowgDot1qStaticMulticastEntry | not-accessible | current | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.1 | ColumngDot1qStaticMulticastVlanIndex | read-only | current | DURABLE: { 0:all } This is here to allow the VLAN Index to be saved along with the corresponding multicast table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.2 | ColumngDot1qStaticMulticastAddress | read-only | current | DURABLE: { 0:all} The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.3 | ColumngDot1qStaticMulticastReceivePort | read-only | current | DURABLE: { 0:all } Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.4 | ColumngDot1qStaticMulticastStaticEgressPorts | read-write | current | DURABLE: { 0:all } The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwar… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.5 | ColumngDot1qStaticMulticastForbiddenEgressPorts | read-write | current | DURABLE: { 0:all } The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be fo… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.6 | ColumngDot1qStaticMulticastStatus | read-write | current | DURABLE: { 0:all } This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so d… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.7 | ColumngDot1qGmrpLearningPermit | read-write | current | This object is used to add a mcast to garp so that other devices can learn it. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4 | NodegDot1qVlan | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.1 | ScalargDot1qVlanNumDeletes | read-only | current | The number of times a VLAN entry has been deleted from the gDot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, th… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2 | TablegDot1qVlanCurrentTable | not-accessible | current | A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically create… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1 | RowgDot1qVlanCurrentEntry | not-accessible | current | Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.1 | ColumngDot1qVlanTimeMark | not-accessible | current | A TimeFilter for this entry. See the TimeFilter textual convention to see how this works. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.2 | ColumngDot1qVlanIndex | not-accessible | current | The VLAN-ID or other identifier refering to this VLAN. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.3 | ColumngDot1qVlanFdbId | read-only | current | The Filtering Database used by this VLAN. This is one of the gDot1qFdbId values in the gDot1qFdbTable. This value is allocated automatically by the device when… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.4 | ColumngDot1qVlanCurrentEgressPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.5 | ColumngDot1qVlanCurrentUntaggedPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.6 | ColumngDot1qVlanStatus | read-only | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.7 | ColumngDot1qVlanCreationTime | read-only | current | The value of sysUpTime when this VLAN was created. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3 | TablegDot1qVlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1 | RowgDot1qVlanStaticEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.1 | ColumngDot1qVlanStaticName | read-create | current | DURABLE: { 'Default' } An administratively assigned string, which may be used to identify the VLAN. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.2 | ColumngDot1qVlanStaticEgressPorts | read-create | current | DURABLE: { 0:all } The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the p… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.3 | ColumngDot1qVlanForbiddenEgressPorts | read-create | current | DURABLE: { 0:all } The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.4 | ColumngDot1qVlanStaticUntaggedPorts | read-create | current | DURABLE: { 0:all } The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (gDot… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.5 | ColumngDot1qVlanStaticRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.6 | ColumngDot1qGvrpLearningPermit | read-write | current | This object is used to add a vlan to garp so that other devices can learn it. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.7 | ColumngDot1qVlanSpanningTreeGroup | read-write | current | This object is used to Get/Set current vlan's spanning-tree group num |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.4 | ScalargDot1qNextFreeLocalVlanIndex | read-only | current | The next available value for gDot1qVlanIndex of a local VLAN entry in gDot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5 | TablegDot1qPortVlanTable | not-accessible | current | A table containing per port control and status information for VLAN configuration in the device. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1 | RowgDot1qPortVlanEntry | not-accessible | current | Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.1 | ColumngDot1qPvid | read-write | current | DURABLE: { 1:all } The PVID, the VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.2 | ColumngDot1qPortAcceptableFrameTypes | read-write | current | DURABLE: { 1:all } When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Prority-Tagged frames received on this port. When admitAll(1)… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.3 | ColumngDot1qPortIngressFiltering | read-write | current | DURABLE: {1:all} When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the po… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.4 | ColumngDot1qPortGvrpStatus | read-write | current | DURABLE: {enabled:all} The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as gDot1qGvrpStatus … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.5 | ColumngDot1qPortGvrpFailedRegistrations | read-only | current | The total number of failed GVRP registrations, for any reason, on this port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.6 | ColumngDot1qPortGvrpLastPduOrigin | read-only | current | The Source MAC Address of the last GVRP message received on this port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6 | TablegDot1qLearningConstraintsTable | not-accessible | current | A table containing learning constraints for sets of Shared and Independendent VLANs. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1 | RowgDot1qLearningConstraintsEntry | not-accessible | current | A learning constraint defined for a VLAN. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.1 | ColumngDot1qConstraintVlan | not-accessible | current | The index of the row in gDot1qVlanCurrentTable for the VLAN constrained by this entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.2 | ColumngDot1qConstraintSet | not-accessible | current | The identity of the constraint set to which gDot1qConstraintVlan belongs. These values may be chosen by the management station. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.3 | ColumngDot1qConstraintType | read-create | current | The type of constraint this entry defines. independent(1) - the VLAN, gDot1qConstraintVlan, uses an independent filtering database from all other VLANs in the … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.4 | ColumngDot1qConstraintStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.7 | ScalargDot1qConstraintSetDefault | read-write | current | The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.4.8 | ScalargDot1qConstraintTypeDefault | read-write | current | The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable. The types are as defined… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5 | NodegDot1dGarp | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1 | TablegDot1dPortGarpTable | not-accessible | current | A table of GARP control information about every bridge port. This is indexed by gDot1qBasePort. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1 | RowgDot1dPortGarpEntry | not-accessible | current | GARP control information for a bridge port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.1 | ColumngDot1dPortEnable | read-write | current | The enabled/disabled status of the port for all GARP protocol instances. This should be set according to the current link state of the port |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.2 | ColumngDot1dPortGarpJoinTime | read-write | current | DURABLE: { 20:all } The GARP Join time, in centiseconds. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.3 | ColumngDot1dPortGarpLeaveTime | read-write | current | DURABLE: { 60:all } The GARP Leave time, in centiseconds. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.4 | ColumngDot1dPortGarpLeaveAllTime | read-write | current | DURABLE: { 1000:all } The GARP LeaveAll time, in centiseconds. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6 | NodegDot1dGmrp | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1 | TablegDot1dPortGmrpTable | not-accessible | current | A table of GMRP control and status information about every bridge port. Augments the gDot1qBasePortTable. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1 | RowgDot1dPortGmrpEntry | not-accessible | current | GMRP control and status information for a bridge port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.1 | ColumngDot1dPortGmrp | read-only | current | The port number of the port for which this entry contains GMRP management information. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.2 | ColumngDot1dPortGmrpStatus | read-write | current | DURABLE: { enabled:all } The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.3 | ColumngDot1dPortGmrpFailedRegistrations | read-only | current | The total number of failed GMRP registrations, for any reason, in all VLANs, on this port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.4 | ColumngDot1dPortGmrpLastPduOrigin | read-only | current | The Source MAC Address of the last GMRP message received on this port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.7 | NodegDot1dExtBase | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.7.1 | ScalargDot1dGmrpStatus | read-write | current | DURABLE: { enabled } The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in … |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8 | NodegDot1qExtend | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.1 | ScalargDot1qDoubleTagging | read-write | current | The global QinQ status |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.2 | ScalargDot1qTpid | read-write | current | The tag protocol id of service provider, this value is used to determine if a incoming packets is tagged and used when insert a new tag |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3 | TablegDot1qDoubleTaggingTable | not-accessible | current | This table is used to config the double tagging function. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1 | RowgDot1qDoubleTaggingEntry | not-accessible | current | Information about double tagging table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.1 | ColumngDot1qDoubleTaggingPort | read-only | current | The index of double tagging entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.2 | ColumngDot1qDoubleTaggingMode | read-write | current | Port's 8021q-in-8021q mode: dtagModeNone means QinQ is disabled; dtagModeInternal means incoming pkt's will be inserted a tag if it has no tag or its' tag-id d… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.3 | ColumngDot1qPortInnerTpid | read-write | current | Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.4 | ColumngDot1qPortOuterTpid | read-write | current | Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.4 | ScalargDot1qInnerTpid | read-write | current | Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5 | TablegDot1qVlanMacTable | not-accessible | current | This table is used to assign a VLAN ID for a packet based on the source MAC Address. If an entry is found, then the VLAN ID, PRIORITY of vlan mac table will be… |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1 | RowgDot1qVlanMacEntry | not-accessible | current | Information about a vlan mac table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.1 | ColumngDot1qVlanMacAddress | read-only | current | The index of vlan mac table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.2 | ColumngDot1qVlanMacNewVlanId | read-write | current | Vlan id to be assigned to the packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.3 | ColumngDot1qVlanMacNewPriority | read-write | current | Priority to be assigned to the packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.4 | ColumngDot1qVlanMacStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6 | TablegDot1qVlanSubnetTable | not-accessible | current | This table is used to assign a VLAN ID for a packet based on the source IP Address. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1 | RowgDot1qVlanSubnetEntry | not-accessible | current | Information about a vlan subnet table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.1 | ColumngDot1qVlanSubnetIpAddress | read-only | current | The first index of vlan subnet table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.2 | ColumngDot1qVlanSubnetIpMask | read-only | current | The second index of vlan subnet table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.3 | ColumngDot1qVlanSubnetNewVlanId | read-write | current | Vlan id to be assigned to the packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.4 | ColumngDot1qVlanSubnetNewPriority | read-write | current | Priority to be assigned to the packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.5 | ColumngDot1qVlanSubnetStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7 | TablegDot1qVlanProtoTable | not-accessible | current | This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1 | RowgDot1qVlanProtoEntry | not-accessible | current | Information about a vlan protocol table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.1 | ColumngDot1qVlanProtoFrameType | read-only | current | Frame type��the first index of vlan protocol entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.2 | ColumngDot1qVlanProtoEthertype | read-only | current | Ether type��the second index of vlan protocol entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.3 | ColumngDot1qVlanProtoPortId | read-only | current | Ingress, wthe third index of vlan protocol entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.4 | ColumngDot1qVlanProtoNewVlanId | read-write | current | Vlan id to be assigned to packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.5 | ColumngDot1qVlanProtoStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8 | TablegDot1qVlanTranslationTable | not-accessible | current | This table is used to to translate the VLAN ID of an incoming tagged packet to another VLAN ID based on the ingress port and incoming packet VLAN ID. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1 | RowgDot1qVlanTransEntry | not-accessible | current | Information about a vlan translation table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.1 | ColumngDot1qVlanTransVlanId | read-only | current | The first index of vlan translation table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.2 | ColumngDot1qVlanTransPortId | read-only | current | The second index of vlan translation table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.3 | ColumngDot1qVlanTransNewVlanId | read-write | current | The new vlan id to be assigned to the packet who match a vlan translation table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.4 | ColumngDot1qVlanTransNewPriority | read-write | current | The priority field of vlan translation table. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.5 | ColumngDot1qVlanTransStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.9 | ScalargDot1qVlanSubnetPrecede | read-write | current | Used to config whether the IP-Subnet Based VLAN has a higher precedence than the MAC Based VLAN. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.10 | ScalargDot1qVlanTransEnable | read-write | current | Used to config current vlan-translation's status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11 | TablegDot1qStackVlanTable | not-accessible | current | A table containing stack vlan configuration information for each stack vlan configured into the device by management. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1 | RowgDot1qStackVlanEntry | not-accessible | current | Information controlling stack VLAN configuration for a port on the device. This is indexed by port and end vlan id. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.1 | ColumngDot1qStackVlanPort | read-write | current | The index of stack vlan. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.2 | ColumngDot1qStartStackVlan | read-write | current | The start vlan of the serial vlans we want to insert a new vlan tag. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.3 | ColumngDot1qEndStackVlan | read-write | current | The end vlan of the serial vlans we want to insert a new vlan tag. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.4 | ColumngDot1qTargetStackVlan | read-write | current | The target vlan of the serial vlans we want to insert. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.5 | ColumngDot1qStackVlanRowStatus | read-write | current | Describe the oprations for the entry:4-create 6-delete |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12 | TablegDot1qVlanPassthroughTable | not-accessible | current | A table containing vlan passthrough configuration information for each vlan passthrough configured into the device by management. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1 | RowgDot1qVlanPassthroughEntry | not-accessible | current | Information controlling VLAN passthrough configuration for a port on the device. This is indexed by port and end vlan id. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.1 | ColumngDot1qPassthroughPort | read-write | current | The index of passthrough entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.2 | ColumngDot1qStartPassthroughVlan | read-write | current | The start vlan of the serial vlans we want to passthrough. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.3 | ColumngDot1qEndPassthroughVlan | read-write | current | The end vlan of the serial vlans we want to passthrough. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.4 | ColumngDot1qPassthroughRowStatus | read-write | current | Describe the oprations for the entry:4-create 6-delete. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13 | TablegDot1qVlanSwapTable | not-accessible | current | A table containing vlan swap configuration information for each vlan swap configured into the device by management. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1 | RowgDot1qVlanSwapEntry | not-accessible | current | Information controlling VLAN swap configuration for a port on the device. This is indexed by port and end vlan id. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.1 | ColumngDot1qVlanSwapPort | read-write | current | The index of vlan swap entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.2 | ColumngDot1qStartSwapVlan | read-write | current | The start vlan of the serial vlans we want to swap. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.3 | ColumngDot1qEndSwapVlan | read-write | current | The end vlan of the serial vlans we want to swap. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.4 | ColumngDot1qTargetSwapVlan | read-write | current | The target vlan of the serial vlans we want to swap. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.5 | ColumngDot1qVlanSwapRowStatus | read-write | current | Describe the oprations for the entry:4-create 6-delete. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14 | NodegDot1qProtocolVlan | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1 | TablegDot1qProtocolVlanTable | not-accessible | current | This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1 | RowgDot1qProtocolVlanEntry | not-accessible | current | Information about a vlan protocol table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.1 | ColumnprotocolVlanTableIndex | read-only | current | index of vlan protocol entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.2 | ColumnprotocolVlanTableEthertype | read-write | current | ether type of packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.3 | ColumnprotocolVlanTableProtocol | read-write | current | protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.4 | ColumnprotocolVlanTableStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2 | TablegDot1qProtocolVlanActionTable | not-accessible | current | This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1 | RowgDot1qProtocolVlanActionEntry | not-accessible | current | Information about a vlan protocol aciton table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.1 | ColumnprotocolVlanAcitonTablePort | read-only | current | port index. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.2 | ColumnprotocolVlanActionTableNewVlan | read-write | current | new vlan id of packet. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.3 | ColumnprotocolVlanActionTableStatus | read-write | current | table entry status. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3 | TablegDot1qProtocolVlanAdminTable | not-accessible | current | This table is used to enable assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1 | RowgDot1qProtocolVlanAdminEntry | not-accessible | current | Information about a vlan protocol admin table entry. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1.1 | ColumnprotocolVlanAdminTablePort | read-only | current | port index. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1.2 | ColumnprotocolVlanAdminTableEnable | read-write | current | enable protocol-based vlan function of a port. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15 | NodegDot1qTranslateVlan | |||
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1 | TablegDot1qTranslateVlanIngressTable | not-accessible | current | This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1 | RowgDot1qTranslateVlanIngressEntry | not-accessible | current | entry of ingress vlan translate. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1.1 | ColumntranslateVlanIngressTableIndex | read-only | current | index of ingress vlan. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1.2 | ColumntranslateIngressTargetVlanID | read-write | current | Target vlan ID. 0 means not set |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2 | TablegDot1qTranslateVlanEgressTable | not-accessible | current | This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1 | RowgDot1qTranslateVlanEgressEntry | not-accessible | current | entry of Egress vlan translate. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1.1 | ColumntranslateVlanEgressTableIndex | read-only | current | index of Egress vlan. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1.2 | ColumntranslateEgressTargetVlanID | read-write | current | Target vlan ID. 0 means not set |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3 | TablegDot1qTranslateVlanPortTable | not-accessible | current | translate vlan port list |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1 | RowgDot1qTranslateVlanPortEntry | not-accessible | current | port entry of vlan translate. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.1 | ColumntranslateVlanTablePort | read-only | current | port index. |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.2 | ColumntranslateTargetVlanIngressTableEnable | read-write | current | enable ingress Translate vlan function of a port.1:enable;2:disable |
| 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.3 | ColumntranslateTargetVlanEgressTableEnable | read-write | current | enable Egress Translate vlan function of a port.1:enable;2:disable |
| 1.3.6.1.4.1.13464.1.2.4.2.2 | NodegarpMIBConformance | |||
| 1.3.6.1.4.1.13464.1.2.4.2.2.1 | NodegarpMIBGroups | |||
| 1.3.6.1.4.1.13464.1.2.4.2.2.1.1 | GroupgarpMIBBaseGroup | current | GARP module groups. | |
| 1.3.6.1.4.1.13464.1.2.4.2.2.2 | NodegarpMIBCompliances | |||
| 1.3.6.1.4.1.13464.1.2.4.2.2.2.1 | CompliancegarpMIBCompliance | current | The compliance statement for the GARP module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| TimeFilter | TimeTicks | current | |
| VlanId | INTEGER (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |
| VlanIndex | Unsigned32 | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |