GDCDATX-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.7 | Nodedatx | |||
| 1.3.6.1.4.1.498.7.1 | NodedatxSystem | |||
| 1.3.6.1.4.1.498.7.1.1 | NodedatxVersion | |||
| 1.3.6.1.4.1.498.7.1.1.1 | ScalardatxMIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.7.1.2 | NodedatxMaintenance | |||
| 1.3.6.1.4.1.498.7.1.2.1 | TabledatxMaintTable | not-accessible | mandatory | This table describes the maintenance objects for the unit |
| 1.3.6.1.4.1.498.7.1.2.1.1 | RowdatxMaintEntry | not-accessible | mandatory | An entry in the GDC Datx Maintenance Table. |
| 1.3.6.1.4.1.498.7.1.2.1.1.1 | ColumndatxMaintIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.2.1.1.2 | ColumndatxFirmwareRev | read-only | mandatory | The version number of the firmware, to allow products to know which revision is installed. The released version number is sequenced from versions are numerical… |
| 1.3.6.1.4.1.498.7.1.2.1.1.3 | ColumndatxDefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(2) the unit will perform a r… |
| 1.3.6.1.4.1.498.7.1.2.1.1.4 | ColumndatxFrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. 'inhibit' refers to when the front panel switches are not operationa… |
| 1.3.6.1.4.1.498.7.1.2.1.1.5 | ColumndatxLedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - RD bit 4 - SD bit 3 - CS bit 2 - CO bit 1 - ALM bit 0 - TM… |
| 1.3.6.1.4.1.498.7.1.3 | NodedatxConfiguration | |||
| 1.3.6.1.4.1.498.7.1.3.1 | TabledatxTransConfigTable | not-accessible | mandatory | This table describes the DATX transmission mode configuration options |
| 1.3.6.1.4.1.498.7.1.3.1.1 | RowdatxTransConfigEntry | not-accessible | mandatory | An entry in the transmission configuration table |
| 1.3.6.1.4.1.498.7.1.3.1.1.1 | ColumndatxTransConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.3.1.1.2 | ColumndatxBaudRate | read-write | mandatory | SYNC/ASYNC Mode operation and Baud Rates |
| 1.3.6.1.4.1.498.7.1.3.1.1.3 | ColumndatxSyncTxClockSource | read-write | mandatory | Synchronous Tx Clock Configuration |
| 1.3.6.1.4.1.498.7.1.3.1.1.4 | ColumndatxEiaSyncClock | read-write | mandatory | Control for the EIA sync clock |
| 1.3.6.1.4.1.498.7.1.3.2 | TabledatxEiaConfigTable | not-accessible | mandatory | DATX EIA line configuration options |
| 1.3.6.1.4.1.498.7.1.3.2.1 | RowdatxEiaConfigEntry | not-accessible | mandatory | An entry in the EIA config table |
| 1.3.6.1.4.1.498.7.1.3.2.1.1 | ColumndatxEIAIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.3.2.1.2 | ColumndatxCarrierControl | read-write | mandatory | |
| 1.3.6.1.4.1.498.7.1.3.2.1.3 | ColumndatxRtsMode | read-write | mandatory | RTS mode selection |
| 1.3.6.1.4.1.498.7.1.3.2.1.4 | ColumndatxRtsCtsDelay | read-write | mandatory | RTS/CTS Delay time |
| 1.3.6.1.4.1.498.7.1.3.2.1.5 | ColumndatxEiaRdlControl | read-write | mandatory | EIA RDL control selection |
| 1.3.6.1.4.1.498.7.1.3.2.1.6 | ColumndatxDsrInAl | read-write | mandatory | Selection for providing DSR will in AL mode |
| 1.3.6.1.4.1.498.7.1.3.2.1.7 | ColumndatxEiaAlControl | read-write | mandatory | EIA AL control |
| 1.3.6.1.4.1.498.7.1.3.3 | TabledatxMiscConfigTable | not-accessible | mandatory | DATX misc configuration options |
| 1.3.6.1.4.1.498.7.1.3.3.1 | RowdatxMiscConfigEntry | not-accessible | mandatory | An entry in the misc config table |
| 1.3.6.1.4.1.498.7.1.3.3.1.1 | ColumndatxMiscIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.3.3.1.2 | ColumndatxSystemStatusOption | read-write | mandatory | Causes to drop CTS in master mode when remote drops line |
| 1.3.6.1.4.1.498.7.1.3.3.1.3 | ColumndatxDualSignalingTimer | read-write | mandatory | |
| 1.3.6.1.4.1.498.7.1.3.3.1.4 | ColumndatxRegenCharLength | read-write | mandatory | Synchronous Tx Clock Configuration |
| 1.3.6.1.4.1.498.7.1.3.3.1.5 | ColumndatxRegenMode | read-write | mandatory | Regen Mode Control |
| 1.3.6.1.4.1.498.7.1.3.3.1.6 | ColumndatxAsyncRate | read-write | mandatory | |
| 1.3.6.1.4.1.498.7.1.4 | NodedatxDiagnostics | |||
| 1.3.6.1.4.1.498.7.1.4.1 | TabledatxDiagnosticsTable | not-accessible | mandatory | DATX diagnostics options |
| 1.3.6.1.4.1.498.7.1.4.1.1 | RowdatxDiagEntry | not-accessible | mandatory | List of Diagnostic Tests and Status Indicators related to the tests |
| 1.3.6.1.4.1.498.7.1.4.1.1.1 | ColumndatxDiagnosticsIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.4.1.1.2 | ColumndatxDiagTest | read-write | mandatory | Perform diagnostic tests on a unit noTest - stops any test in progress selfTest - sends a selftest pattern analoop - puts the unit into analog loopback analoop… |
| 1.3.6.1.4.1.498.7.1.4.1.1.3 | ColumndatxTestError | read-only | mandatory | Test result indicator, shows the results of the last test |
| 1.3.6.1.4.1.498.7.1.4.1.1.4 | ColumndatxTestDuration | read-only | mandatory | Indicates the time duration of any test in progress |
| 1.3.6.1.4.1.498.7.1.5 | NodedatxStatus | |||
| 1.3.6.1.4.1.498.7.1.5.1 | TabledatxStatusTable | not-accessible | mandatory | DATX Status indicators |
| 1.3.6.1.4.1.498.7.1.5.1.1 | RowdatxStatusEntry | not-accessible | mandatory | Entry in the status indicator table |
| 1.3.6.1.4.1.498.7.1.5.1.1.1 | ColumndatxStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a slot, line, drop, and sub-identifier. |
| 1.3.6.1.4.1.498.7.1.5.1.1.2 | ColumndatxDTRstatus | read-only | mandatory | DTR EIA status indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.3 | ColumndatxRDLstatus | read-only | mandatory | RDL EIA control status indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.4 | ColumndatxCOstatus | read-only | mandatory | CO EIA status indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.5 | ColumndatxCTSstatus | read-only | mandatory | CTS EIA indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.6 | ColumndatxRTSstatus | read-only | mandatory | RTS EIA indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.7 | ColumndatxTMstatus | read-only | mandatory | Test mode EIA indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.8 | ColumndatxALstatus | read-only | mandatory | Analoop EIA status indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.9 | ColumndatxDSRstatus | read-only | mandatory | DSR EIA status indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.10 | ColumndatxRXclock | read-only | mandatory | RxClk activity indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.11 | ColumndatxTXclock | read-only | mandatory | TxClk activity indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.12 | ColumndatxEXTclock | read-only | mandatory | External clock activity indicator |
| 1.3.6.1.4.1.498.7.1.5.1.1.13 | ColumndatxAlarmStatus | read-only | mandatory | The current alarms of the unit without the alarm masks. |
| 1.3.6.1.4.1.498.7.2 | Nodedtx2011 | |||
| 1.3.6.1.4.1.498.7.2.1 | Nodedtx2011AlarmData | |||
| 1.3.6.1.4.1.498.7.2.1.1 | Nodedtx2011NoResponseAlm | |||
| 1.3.6.1.4.1.498.7.2.1.2 | Nodedtx2011DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.7.2.1.3 | Nodedtx2011PowerUpAlm | |||
| 1.3.6.1.4.1.498.7.2.1.4 | Nodedtx2011DCDLossAlm | |||
| 1.3.6.1.4.1.498.7.2.1.5 | Nodedtx2011NoExtClockAlm |